Commit Graph

14 Commits

Author SHA1 Message Date
Al Viro 6131ffaa1f more file_inode() open-coded instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27 16:59:05 -05:00
Namjae Jeon e975082411 f2fs: add compat_ioctl to provide backward compatability
adding compat_ioctl to provide support for backward comptability - 32bit binary
execution on 64bit kernel.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-12 07:15:02 +09:00
Changman Lee facb020540 f2fs: stop repeated checking if cp is needed
If it is decided that f2fs should do checkpoint, skip next comparison.

Signed-off-by: Changman Lee <cm224.lee@samsung.com>
2013-02-12 07:15:01 +09:00
Jaegeuk Kim d4686d56ec f2fs: avoid balanc_fs during evict_inode
1. Background

Previously, if f2fs tries to move data blocks of an *evicting* inode during the
cleaning process, it stops the process incompletely and then restarts the whole
process, since it needs a locked inode to grab victim data pages in its address
space. In order to get a locked inode, iget_locked() by f2fs_iget() is normally
used, but, it waits if the inode is on freeing.

So, here is a deadlock scenario.
1. f2fs_evict_inode()       <- inode "A"
  2. f2fs_balance_fs()
    3. f2fs_gc()
      4. gc_data_segment()
        5. f2fs_iget()      <- inode "A" too!

If step #1 and #5 treat a same inode "A", step #5 would fall into deadlock since
the inode "A" is on freeing. In order to resolve this, f2fs_iget_nowait() which
skips __wait_on_freeing_inode() was introduced in step #5, and stops f2fs_gc()
to complete f2fs_evict_inode().

1. f2fs_evict_inode()           <- inode "A"
  2. f2fs_balance_fs()
    3. f2fs_gc()
      4. gc_data_segment()
        5. f2fs_iget_nowait()   <- inode "A", then stop f2fs_gc() w/ -ENOENT

2. Problem and Solution

In the above scenario, however, f2fs cannot finish f2fs_evict_inode() only if:
 o there are not enough free sections, and
 o f2fs_gc() tries to move data blocks of the *evicting* inode repeatedly.

So, the final solution is to use f2fs_iget() and remove f2fs_balance_fs() in
f2fs_evict_inode().
The f2fs_evict_inode() actually truncates all the data and node blocks, which
means that it doesn't produce any dirty node pages accordingly.
So, we don't need to do f2fs_balance_fs() in practical.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-12 07:15:01 +09:00
Jaegeuk Kim bd43df021a f2fs: cover global locks for reserve_new_block
The fill_zero() from fallocate() calls get_new_data_page() in which calls
reserve_new_block().
The reserve_new_block() should be covered by *DATA_NEW*, one of global locks.
And also, before getting the lock, we should check free sections by calling
f2fs_balance_fs().

If we break this rule, f2fs is able to face with out-of-control free space
management and fall into infinite loop like the following scenario as well.

[f2fs_sync_fs()]             [fallocate()]
 - write_checkpoint()        - fill_zero()
  - block_operations()        - get_new_data_page()
   : grab NODE_NEW             - get_dnode_of_data()
                                : get locked dirty node page
    - sync_node_pages()
                                : try to grab NODE_NEW for data allocation
     : trylock and skip the dirty node page
   : call sync_node_pages() repeatedly in order to flush all the dirty node
     pages!

In order to avoid this, we should grab another global lock such as DATA_NEW
before calling get_new_data_page() in fill_zero().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-12 07:15:00 +09:00
Jaegeuk Kim 692bb55d1a f2fs: add remap_pages as generic_file_remap_pages
This was added for all the file systems before.

See the following commit.

commit id: 0b173bc4da

[PATCH] mm: kill vma flag VM_CAN_NONLINEAR

This patch moves actual ptes filling for non-linear file mappings
into special vma operation: ->remap_pages().

File system must implement this method to get non-linear mappings support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support."

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:48:58 +09:00
Jaegeuk Kim 9eaeba7013 f2fs: move f2fs_balance_fs to punch_hole
The f2fs_fallocate() has two operations: punch_hole and expand_size.

Only in the case of punch_hole, dirty node pages can be produced, so let's
trigger f2fs_balance_fs() in this case only.
Furthermore, let's trigger it at every data truncation routine.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11 15:09:23 +09:00
Jaegeuk Kim 7d82db8316 f2fs: add f2fs_balance_fs in several interfaces
The f2fs_balance_fs() is to check the number of free sections and decide whether
it needs to conduct cleaning or not. If there are not enough free sections, the
cleaning job should be started.

In order to control an amount of free sections even under high utilization, f2fs
should call f2fs_balance_fs at all the VFS interfaces that are able to produce
dirty pages.
This patch adds the function calls in the missing interfaces as follows.

1. f2fs_setxattr()
The f2fs_setxattr() produces dirty node pages so that we should call
f2fs_balance_fs() either likewise doing in other VFS interfaces such as
f2fs_lookup(), f2fs_mkdir(), and so on.

2. f2fs_sync_file()
We should guarantee serving free sections for syncing metadata during fsync.
Previously, there is no space check before triggering checkpoint and
sync_node_pages.
Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization,
f2fs is able to be faced with no free sections, resulting in BUG_ON().

3. f2fs_sync_fs()
Before calling write_checkpoint(), we should guarantee that there are minimum
free sections.

4. f2fs_write_inode()
f2fs_write_inode() is also able to produce dirty node pages.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11 15:09:17 +09:00
Namjae Jeon 3af60a49fd f2fs: fix time update in case of f2fs fallocate
After doing a punch hole or expanding inode doing fallocation.
The change and modification time are not update for the file.
So, update time after no issue is observed in fallocate.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:42:59 +09:00
Jaegeuk Kim 398b1ac5a5 f2fs: fix handling errors got by f2fs_write_inode
Ruslan reported that f2fs hangs with an infinite loop in f2fs_sync_file():

	while (sync_node_pages(sbi, inode->i_ino, &wbc) == 0)
		f2fs_write_inode(inode, NULL);

The reason was revealed that the cold flag is not set even thought this inode is
a normal file. Therefore, sync_node_pages() skips to write node blocks since it
only writes cold node blocks.

The cold flag is stored to the node_footer in node block, and whenever a new
node page is allocated, it is set according to its file type, file or directory.

But, after sudden-power-off, when recovering the inode page, f2fs doesn't recover
its cold flag.

So, let's assign the cold flag in more right places.

One more thing:
If f2fs_write_inode() returns an error due to whatever situations, there would
be no dirty node pages so that sync_node_pages() returns zero.
(i.e., zero means nothing was written.)

Reported-by: Ruslan N. Marchenko <me@ruff.mobi>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:52 +09:00
Wei Yongjun 705f814e34 f2fs: remove unused variable
The variables node_page and page_offset are initialized but never used
otherwise, so remove those unused variables.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2012-12-11 13:43:44 +09:00
Namjae Jeon 1fa95b0b67 f2fs: check read only condition before beginning write out
If the filesystem is mounted as read-only then return from that point itself
instead of first doing a writeout/wait and then checking for read-only
condition.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:43 +09:00
Jaegeuk Kim 0a8165d7c2 f2fs: adjust kernel coding style
As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment
blocks. Instead, just use "/*".

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:42 +09:00
Jaegeuk Kim fbfa2cc58d f2fs: add file operations
This adds memory operations and file/file_inode operations.

- F2FS supports fallocate(), mmap(), fsync(), and basic ioctl().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:41 +09:00