This patch adds two macros for transition between byte and block offsets.
Currently, f2fs only supports 4KB blocks, so use the default size for now.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FASTBOOT flag into checkpoint as follows.
- CP_UMOUNT_FLAG is set when system is umounted.
- CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
was done.
So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_recover_data, we find and update previous node pages after updating
its new block addresses.
After then, we call fill_node_footer without reset field, we erase its
cold bit so that this new cold node block is written to wrong log area.
This patch fixes not to miss its old flag.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch defines macro/inline dentry structure, and adds some helpers for
inline dir infrastructure.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes
sector device at maximum. But now f2fs only support 512 bytes size sector, so
block device such as zRAM which uses page cache as its block storage space will
not be mounted successfully as mismatch between sector size of zRAM and sector
size of f2fs supported.
In this patch we support large sector size in f2fs, so block device with sector
size of 512/1024/2048/4096 bytes can be supported in f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro
instead of numbers in code for readability.
change log from v1:
o fix typo pointed out by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Theoretically, our total inodes number is the same as total node number, but
there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2
(meta nid), and they should never be used by user, so our total/free inode
number calculated in ->statfs is wrong.
This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by
recalculating total/free inode number with the macro.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs's cp has one page which consists of struct f2fs_checkpoint and
version bitmap of sit and nat. To support lots of segments, we need more
blocks for sit bitmap. So let's arrange sit bitmap as following:
+-----------------+------------+
| f2fs_checkpoint | sit bitmap |
| + nat bitmap | |
+-----------------+------------+
0 4k N blocks
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: simple code change for readability]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When large directory feathure is enable, We have one case which could cause
overflow in dir_buckets() as following:
special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2.
Here we define MAX_DIR_BUCKETS to limit the return value when the condition
could trigger potential overflow.
Changes from V1
o modify description of calculation in f2fs.txt suggested by Changman Lee.
Suggested-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in
direct node or inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces an i_dir_level field to support large directory.
Previously, f2fs maintains multi-level hash tables to find a dentry quickly
from a bunch of chiild dentries in a directory, and the hash tables consist of
the following tree structure as below.
In Documentation/filesystems/f2fs.txt,
----------------------
A : bucket
B : block
N : MAX_DIR_HASH_DEPTH
----------------------
level #0 | A(2B)
|
level #1 | A(2B) - A(2B)
|
level #2 | A(2B) - A(2B) - A(2B) - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
But, if we can guess that a directory will handle a number of child files,
we don't need to traverse the tree from level #0 to #N all the time.
Since the lower level tables contain relatively small number of dentries,
the miss ratio of the target dentry is likely to be high.
In order to avoid that, we can configure the hash tables sparsely from level #0
like this.
level #0 | A(2B) - A(2B) - A(2B) - A(2B)
level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
. | . . . .
level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
With this structure, we can skip the ineffective tree searches in lower level
hash tables.
This patch adds just a facility for this by introducing i_dir_level in
f2fs_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate
whether the inode has inline data.
Inline data makes use of inode block's data indices region to save small
file. Currently there are 923 data indices in an inode block. Since
inline xattr has made use of the last 50 indices to save its data, there
are 873 indices left which can be used for inline data. When
FI_INLINE_DATA is set, the layout of inode block's indices region is
like below:
+-----------------+
| | Reserved. reserve_new_block() will make use of
| i_addr[0] | i_addr[0] when we need to reserve a new data block
| | to convert inline data into regular one's.
|-----------------|
| | Used by inline data. A file whose size is less than
| i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra
| | blocks by fallocate() can be saved here.
|-----------------|
| |
| i_addr[873~922] | Reserved for inline xattr
| |
+-----------------+
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
0. modified inode structure
--------------------------------------
metadata (e.g., i_mtime, i_ctime, etc)
--------------------------------------
direct pointers [0 ~ 873]
inline xattrs (200 bytes by default)
indirect pointers [0 ~ 4]
--------------------------------------
node footer
--------------------------------------
1. setxattr flow
- read_all_xattrs copies all the xattrs from inline and xattr node block.
- handle xattr entries
- write_all_xattrs copies modified xattrs into inline and xattr node block.
2. getxattr flow
- read_all_xattrs copies all the xattrs from inline and xattr node block.
- check target entries
3. Usage
# mount -t f2fs -o inline_xattr $DEV $MNT
Once mounted with the inline_xattr option, f2fs marks all the newly created
files to reserve an amount of inline xattr space explicitly inside the inode
block. Without the mount option, f2fs will not touch any existing files and
newly created files as well.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enables the number of direct pointers inside on-disk inode block to
be changed dynamically according to the size of inline xattr space.
The number of direct pointers, ADDRS_PER_INODE, can be changed only if the file
has inline xattr flag.
The number of direct pointers that will be used by inline xattrs is defined as
F2FS_INLINE_XATTR_ADDRS.
Current patch assigns F2FS_INLINE_XATTR_ADDRS to 0 temporarily.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds basic inode flags for inline xattrs, F2FS_INLINE_XATTR,
and add a mount option, inline_xattr, which is enabled when xattr is set.
If the mount option is enabled, all the files are marked with the inline_xattrs
flag.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The on-disk block address is defined as __le32, but in-memory block address,
block_t, does as u64.
Let's synchronize them to 32 bits.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The maximum filename length supported in linux is 255 characters.
So let's follow that.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Simplify code by providing the accessor macro to retrieve the
number of dentry slots for a given filename length.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
This patch should resolve the bugs reported by the sparse tool.
Initial reports were written by "kbuild test robot" managed by fengguang.wu.
In my local machines, I've tested also by running:
> make C=2 CF="-D__CHECK_ENDIAN__"
Accordingly, I've found lots of warnings and bugs related to the endian
conversion. And I've fixed all at this moment.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds a header file describing the on-disk layout of f2fs.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim