Commit Graph

35 Commits

Author SHA1 Message Date
Wilson Callan 9a0985b78d mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access
Patch to not set reserved bits in i.MX25 PROCTL register.  DMA stops
working if those bits get set.

Signed-off-by: Wilson Callan <wilson.callan@savantsystems.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 16:42:30 -04:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Linus Torvalds ce53044c68 arm-soc: driver specific updates
These changes are specific to some driver that may be used by multiple
 boards or socs. The most significant change in here is the move of the
 samsung iommu code from a platform specific in-kernel interface to the
 generic iommu subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuevXAAoJEIwa5zzehBx3D8YQAKfoY3TFjJ9KmJgk69/pc7cf
 Of0rvX+35NezGFljIyRdspz+DsV+vhJravwdVxOagRKvVBOb9qnZIXnl3gkLnTw4
 dCVMFMqCwXhBeXlXCzHSeRmt2+4/fmJnr7jr4xh9omOAJ9BZv5ftmKNW4zP5wr1L
 +9HBwzkxlVisR4NCz2q66YBjsV2dXA3dv2hZxEFkUdQFYJGqZoUXLYHF9yno20i3
 knKNXEyAFYFUKHiFVBQJ1tYGmZlaIjw14g+GTqzZay2Pi/HjUXfrPd0VwNkBzZf/
 H1N3/cf4GJ2+K/zYqh+H/Xjf/Fjkp1dFNhlUQ7+l5Jwbu7C1B2euvwTO4OaqrfdD
 7eqG3+uIKhPO2Z8ZySLFgx4ghybtwgZrAwOjsa+ymTugqPbiWYB/zZR1iWu5DMk/
 TnNb6P3ciP+WMpoMFh1kXRc/eCCCHtuQ0rLRxizSX6HIpxWvjYFNLH7L3wS+KtlB
 7vsS764d1JFW318bsdBi+V/LWRVXeSWWetTzdzDcM/Syz3ZqfPy7e3Ge6qx0lvYe
 5ojgzKwVqpJenZdt91UC16cMXNqDTzmZObz6LOCmVm1mB5kYSgEHYxAQQvuGFjXT
 28kGyBQNsBboJGaYh2O/CTsVXnHnaPXrtDDWMDacWNwwPYnnA2L8lUNfAg1DgA1j
 Z6CO8Knfct01EpQLtybK
 =hgkg
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...
2012-05-26 12:22:27 -07:00
Arnd Bergmann 7f217794ff mmc: dt: Consolidate DT bindings
This patch unifies the current DT MMC bindings documentation and code,
adds generic MMC DT bindings documentation, and updates .dts files for
consistency.

[cjb: typo fixes, addition of max-frequency property]
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-15 13:29:42 +02:00
Arnd Bergmann 4f5a9fd341 Merge branch 'imx/pinctrl' into imx/clock
Conflicts:
	drivers/mmc/host/sdhci-esdhc-imx.c
	drivers/net/ethernet/freescale/fec.c
	drivers/spi/spi-imx.c
	drivers/tty/serial/imx.c

This resolves dependencies between the pinctrl and clock changes
in imx.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14 15:30:52 +02:00
Dong Aisheng e62d8b8fe7 mmc: sdhci-imx-esdhc: adopt pinctrl support
Cc: linux-mmc@vger.kernel.org
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2012-05-11 14:56:01 +08:00
Sascha Hauer 52dac61505 mmc sdhc i.MX: do not depend on grouped clocks
the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25 17:03:38 +02:00
Eric Bénard b89152824f mmc: unbreak sdhci-esdhc-imx on i.MX25
This was broken by me in 37865fe915
("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more
extensive tests would have shown that read or write of data to the
card were failing (even if the partition table was correctly read).

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-20 20:45:00 -04:00
Arnd Bergmann f907ab06bb Merge branch 'next/fixes-non-critical' into next/drivers
Conflicts:
	arch/arm/mach-lpc32xx/clock.c
	arch/arm/mach-pxa/pxa25x.c
	arch/arm/mach-pxa/pxa27x.c

The conflicts with pxa are non-obvious, we have multiple branches
adding and removing the same clock settings. According to
Haojian Zhuang, removing the sa1100 rtc dummy clock is the correct
fix here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-20 22:42:24 +00:00
Sascha Hauer 5b6b0ad6e5 mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.

The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-04 12:25:02 -05:00
Richard Zhao 5ef97faa31 mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare
It's for migrating to generic clk framework API.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-01 14:29:31 +01:00
Axel Lin d1f81a64a4 mmc: convert drivers/mmc/host/* to use module_platform_driver()
This patch converts the drivers in drivers/mmc/host/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:42 -05:00
Manuel Lauss 29495aa04a mmc: sdhci: remove "state" argument from sdhci_suspend_host
Drop the "state" argument from sdhci_suspend_host.  Its only user is the
PCI glue;  this allows to move all SDHCI glues to use dev_pm_ops instead.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:50:11 -08:00
Shawn Guo f750ba9b8d arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from
SD/MMC cards.

  Waiting for root device /dev/mmcblk0p1...
  mmc1: host does not support reading read-only switch. assuming write-enable.
  mmc1: new high speed SDHC card at address b368
  mmcblk0: mmc1:b368 SDC   3.74 GiB
   mmcblk0: p1
  mmc1: Timeout waiting for hardware interrupt.
  mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00
  end_request: I/O error, dev mmcblk0, sector 3678225
  Buffer I/O error on device mmcblk0p1, logical block 458754
  lost page write due to I/O error on mmcblk0p1

This patch fixes the problem by lowering the usdhc clock and correcting
watermark configuration.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11 16:53:35 +01:00
Shawn Guo 95a2482a9b mmc: sdhci-esdhc-imx: add basic imx6q usdhc support
This patch adds the basic support for imx6q usdhc, which is a
derivative of esdhc controller.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:10 -04:00
Richard Zhu 97e4ba6a5e mmc: sdhci-esdhc-imx: Enable ADMA2
Eanble the ADMA2 mode for freescale esdhc imx driver, tested on MX25
3DS board, MX51 BBG board and MX53 LOCO board.

This patch is only used to enable the ADMA2 for MX51/53 platforms.
MX25/35 can't support the ADMA2 mode, set BROKEN_ADMA quirk on
MX25/35 platforms.

The ADMA mode supported or not can be distinguished by bit 20 of
the Capability Register (offset 0x40) in the FSL eSDHC module.

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
Tested-and-acked-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 15:43:34 -04:00
Shawn Guo 66506f7617 mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h
There are the following warnings and errorx when compiling the driver.
The patch adds the missing inclusion of linux/module.h to fix them.

drivers/mmc/host/sdhci-esdhc-imx.c:563:12: error: ‘THIS_MODULE’ undeclared here (not in a function)
[..]

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-28 14:10:00 -04:00
Tony Lin 0d58864bf3 mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC
Apply a workaround for the imx eSDHC controller to avoid missing
card interrupts.  This makes SDIO work.

Signed-off-by: Tony Lin <tony.lin@freescale.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13 14:50:26 -04:00
Shawn Guo abfafc2d10 mmc: sdhci-esdhc-imx: add device tree probe support
The patch adds device tree probe support for sdhci-esdhc-imx driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27 09:31:39 +08:00
Shawn Guo 57ed3314e0 mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
platform_device_id to distinguish the esdhc differences among SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27 09:31:27 +08:00
Shawn Guo 842afc02cf mmc: sdhci-esdhc-imx: do not reference platform data after probe
The patch copies platform data into pltfm_imx_data and reference
the data there than platform data after probe.

This work is inspired by Grant Likely and Troy Kisky.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27 09:31:21 +08:00
Shawn Guo 913413c307 mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
The patch extends card_detect and write_protect support to get mx5
family and more scenarios supported.  The changes include:

 * Turn platform_data from optional to mandatory
 * Add cd_types and wp_types into platform_data to cover more use
   cases
 * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD
 * Adjust some machine codes to adopt the platform_data changes
 * Work around the issue that software reset will get card detection
   circuit stop working

With this patch, card_detect and write_protect gets supported on
mx5 based platforms.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27 09:31:14 +08:00
Shawn Guo e8cd77e467 mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
The use of flag ESDHC_FLAG_GPIO_FOR_CD_WP is all CD related.  It does
not necessarily need to bother WP in the flag name.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:21:03 -04:00
Shawn Guo 803862a6f7 mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT,
when the card detect gpio tells there is no card.  But it does not
clear the bit actually.  The patch gives a fix on that.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:21:02 -04:00
Shawn Guo f0de836923 mmc: sdhci: change sdhci-pltfm into a module
There are a couple of problems left from the sdhci pltfm and OF
consolidation changes.

* When building more than one sdhci-pltfm based drivers in the same
  image, linker will give multiple definition error on the sdhci-pltfm
  helper functions.  For example right now, building sdhci-of-esdhc
  and sdhci-of-hlwd together is a valid combination from Kconfig view.

* With the current build method, there is error with building the
  drivers as module, but module installation fails with modprobe.

The patch fixes above problems by changing sdhci-pltfm into a module.
To avoid EXPORT_SYMBOL on so many big endian IO accessors, it moves
these accessors into sdhci-pltfm.h as the 'static inline' functions.
As a result, sdhci.h needs to be included in sdhci-pltfm.h, and in
turn can be removed from individual drivers which already include
sdhci-pltfm.h.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:20:49 -04:00
Shawn Guo 94cc6a8656 mmc: sdhci: merge two sdhci-pltfm.h into one
The structure sdhci_pltfm_data is not necessarily to be in a public
header like include/linux/mmc/sdhci-pltfm.h, so the patch moves it
into drivers/mmc/host/sdhci-pltfm.h and eliminates the former one.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:20:48 -04:00
Shawn Guo 85d6509dc8 mmc: sdhci: make sdhci-pltfm device drivers self registered
The patch turns the common stuff in sdhci-pltfm.c into functions, and
add device drivers their own .probe and .remove which in turn call
into the common functions, so that those sdhci-pltfm device drivers
register itself and keep all device specific things away from common
sdhci-pltfm file.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:16:06 -04:00
Richard Zhu 58ac8177ce mmc: sdhci-esdhc: enable esdhc on imx53
Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in
SDIO on imx53.

The CMDTYPE of the CMD register (offset 0xE) should be set to "11"
when the STOP CMD12 is issued on imx53 to abort one open ended
multi-blk IO. Otherwise the TC INT wouldn't be generated.

In exact block transfer, the controller doesn't complete the
operations automatically as required at the end of the transfer
and remains on hold if the abort command is not sent on imx53.

As a result, the TC flag is not asserted and SW receives timeout
exception. Set bit1 of Vendor Spec register to fix it.

Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25 10:30:50 -04:00
Richard Zhu e149860d16 mmc: sdhci-esdhc: use writel/readl as general APIs
Add one flag to indicate the GPIO CD/WP is enabled or not
on imx platforms, and reuse the writel/readl as the general
APIs for imx SOCs.

Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25 10:30:50 -04:00
Wolfram Sang 7e29c30603 mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:04 -04:00
Wolfram Sang 3bb2a9f6a7 mmc: sdhci-esdhc: broken card detection is not a default quirk
It can be worked around using a GPIO which will be done for i.MX later.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:02 -04:00
Wolfram Sang 0c6d49ce53 mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:00 -04:00
Eric Bénard 16a790bcce mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35
Only these CPUs list the bug in their errata.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 17:52:27 -05:00
Eric Bénard 37865fe915 mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
This patch fixes timeout problems on i.MX's sdhci as suggested by
Richard Zhu.

Tested on:
- i.MX257: not needed
- i.MX357: needed
- i.MX515: needed

More details can be found here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-October/029748.html

Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Shawn Guo <shawn.gsc@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 17:52:20 -05:00
Wolfram Sang 95f25efe0c mmc: sdhci-pltfm: add -pltfm driver for imx35/51
This driver adds basic support for the esdhc-core found on e.g.
imx35/51, as a platform driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:22 +08:00