Commit Graph

79 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz f37afdaca7 ide: constify struct ide_dma_ops
* Export ide_dma_exec_cmd() and __ide_dma_test_irq().

* Constify struct ide_dma_ops.

* Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
  (it is later overriden by ide_init_port() if needed) and drop
  'const struct ide_port_info *d' argument.

While at it:

* Rename __ide_dma_test_irq() to ide_dma_test_irq().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:24 +02:00
Bartlomiej Zolnierkiewicz 5e37bdc081 ide: add struct ide_dma_ops (take 3)
Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:24 +02:00
Bartlomiej Zolnierkiewicz b123f56e04 ide: do complete DMA setup in ->init_dma method (take 2)
* Make ide_hwif_setup_dma() return an error value.

* Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase'
  to ->init_dma method and make it return an error value.

* Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),
  change ordering of its arguments and then export it.

* Export ide_pci_set_master().

* Do complete DMA setup inside ->init_dma method and update ->init_dma
  users accordingly.

* Sanitize code for DMA setup in ide_init_port().

v2:
* Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs
  (from Jiri Slaby <jirislaby@gmail.com>):

  Fix following compiler warning by returning EINVAL:

  In file included from ANYTHING-INCLUDING-IDE.H:45:
  include/linux/ide.h: In function ‘ide_hwif_setup_dma’:
  include/linux/ide.h:1022: warning: no return statement in function returning non-void

Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:22 +02:00
Bartlomiej Zolnierkiewicz 63158d5c21 ide: cleanup ide_setup_dma()
* There is no need to call ide_release_dma_engine().

* Move the code up to (and including) ide_allocate_dma_engine()
  call to the callers of ide_setup_dma().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:21 +02:00
Bartlomiej Zolnierkiewicz d54452fbf8 ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
Factor out setting PCI bus-mastering from ide_hwif_setup_dma()
to ide_pci_set_master() helper.

While at it:

* don't read PCI Command register if not necessary

* use PCI device name instead of hwif->name

* cleanup ide_hwif_setup_dma() a bit

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:21 +02:00
Bartlomiej Zolnierkiewicz 23658f8af3 ide: move ide_setup_dma() call out from ->init_dma method
There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:21 +02:00
Bartlomiej Zolnierkiewicz 5e59c23684 ide: remove ->cds field from ide_hwif_t (take 2)
* Use hwif->name instead of cds->name in ide_allocate_dma_engine().

* Use pci_name(dev) instead of cds->name in init_dma_pdc202xx().

* Remove no longer needed ->cds field from ide_hwif_t.

v2:

* scc_pata.c also needs to be updated now (noticed by Stephen Rothwell).

There should be no functional changes caused by this patch.

Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:20 +02:00
Bartlomiej Zolnierkiewicz 0d1bad216c ide: manage resources for PCI devices in ide_pci_enable() (take 3)
* Reserve PCI BARs 0-3 (0-1 for single port controllers) in
  ide_pci_enable() and remove ide_hwif_request_regions() call
  from ide_device_add_all() (also cleanup resource management
  in scc_pata host driver).

* Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup
  ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver)
  and remove ide_release[_iomio]_dma().

v2:
* Fixup trm290 host driver.

v3:
* Because of scc_pata host driver changes we need to call
  pci_request_selected_regions() also in setup_mmio_scc().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 22:25:19 +02:00
Paolo Ciarrocchi 846bb88ae8 IDE: Coding Style fixes to drivers/ide/setup-pci.c
File is now error free.
Compile tested.

[bart: minor fixes, md5sum checked]

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 17:36:39 +02:00
Bartlomiej Zolnierkiewicz fe80b937c9 ide: merge ide_match_hwif() and ide_find_port()
* Change ide_match_hwif() argument from 'u8 bootable' to
  'struct ide_port_info *d'.

* Move ide_match_hwif() to ide-probe.c from setup-pci.c and rename
  it to ide_find_port_slot().  Update some comments while at it.

* ide_find_port() can be now just a wrapper for ide_find_port_slot().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 17:36:36 +02:00
Bartlomiej Zolnierkiewicz 5e71d9c5a5 ide: IDE_HFLAG_BOOTABLE -> IDE_HFLAG_NON_BOOTABLE
"bootable" should be the default behavior so replace
IDE_HFLAG_BOOTABLE host flag with IDE_HFLAG_NON_BOOTABLE.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 17:36:35 +02:00
Bartlomiej Zolnierkiewicz bad7c825cb ide: cleanup ide_match_hwif()
* Remove no longer needed matching against I/O base and 'io_base' argument.

* Move printk() to the caller and remove 'name' argument.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 17:36:31 +02:00
Sergei Shtylyov 1baccff8a5 ide: make ide_pci_check_iomem() actually work
This function didn't actually check if a given BAR is in I/O space because of
using the bogus PCI_BASE_ADDRESS_IO_MASK (which equals ~3) to test the resource
flags instead of IORESOURCE_IO -- fix this, make ide_hwif_configure() check the
results failing if necessary, and move the printk() call to the failure path.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26 17:36:31 +02:00
Bartlomiej Zolnierkiewicz f01674e459 ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
* Remove obsoleted "idex=noprobe" kernel parameter.

* Remove no longer needed hwif->noprobe quirk from ide_hwif_configure()
  and hwif->noprobe checking from cmd640.c.

v2:
* "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:35 +02:00
Bartlomiej Zolnierkiewicz aab8ad9ec8 ide: remove needless hwif->irq check from ide_hwif_configure()
ide_init_default_irq() is always zero for CONFIG_PCI=y so hwif->irq
check in ide_hwif_configure() can be safely removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:35 +02:00
Bartlomiej Zolnierkiewicz 9a0e77f28b ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2)
* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  and update Documentation/ide/ide.txt.

* Remove no longer needed ide_forced chipset type.

v2:
* is_chipset_set[] -> is_chipset_set in ide.c.

* Documentation/ide/ide.txt fix.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:24 +02:00
Bartlomiej Zolnierkiewicz c413b9b94d ide: add struct ide_port_info instances to legacy host drivers
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:31 +01:00
Bartlomiej Zolnierkiewicz 1ebf74936b ide: separate PCI specific init from generic init in ide_pci_setup_ports()
* Setup ->mate and ->channel in ide_pci_setup_ports() instead of
  in ide_hwif_configure().

* Make 'port' parameter for ide_hwif_configure() 'unsigned int'.

* Separate PCI specific init from generic init in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:30 +01:00
Bartlomiej Zolnierkiewicz bf77c53171 ide: always set DMA masks in ide_pci_setup_ports()
Always set DMA masks in ide_pci_setup_ports() to make sure that the valid
masks for a host are set.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:30 +01:00
Linus Torvalds 215e871aaa Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits)
  PCI: make pci_bus a struct device
  PCI: fix codingstyle issues in include/linux/pci.h
  PCI: fix codingstyle issues in drivers/pci/pci.h
  PCI: PCIE ASPM support
  PCI: Fix fakephp deadlock
  PCI: modify SB700 SATA MSI quirk
  PCI: Run ACPI _OSC method on root bridges only
  PCI ACPI: AER driver should only register PCIe devices with _OSC
  PCI ACPI: Added a function to register _OSC with only PCIe devices.
  PCI: constify function pointer tables
  PCI: Convert drivers/pci/proc.c to use unlocked_ioctl
  pciehp: block new requests from the device before power off
  pciehp: workaround against Bad DLLP during power off
  pciehp: wait for 1000ms before LED operation after power off
  PCI: Remove pci_enable_device_bars() from documentation
  PCI: Remove pci_enable_device_bars()
  PCI: Remove users of pci_enable_device_bars()
  PCI: Add pci_enable_device_{io,mem} intefaces
  PCI: avoid save the same type of cap multiple times
  PCI: correctly initialize a structure for pcie_save_pcix_state()
  ...
2008-02-02 14:29:33 +11:00
Benjamin Herrenschmidt 0948391641 PCI: Remove users of pci_enable_device_bars()
This patch converts users of pci_enable_device_bars() to the new
pci_enable_device_{io,mem} interface.

The new API fits nicely, except maybe for the QLA case where a bit of
code re-organization might be a good idea but I prefer sticking to the
simple patch as I don't have hardware to test on.

I'll also need some feedback on the cs5520 change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Bartlomiej Zolnierkiewicz 59bca8cc99 ide: update/add my Copyrights
The last years stuff and a trip down memory lane...

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:33 +01:00
Bartlomiej Zolnierkiewicz 58f189fccc ide: delete filenames/versions from comments
Delete filenames/versions from comments.

I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s
to maintainers of the respective drivers.

While at it:

* Remove unused VERSION define from ide.c.

* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:33 +01:00
Bartlomiej Zolnierkiewicz 36501650ec ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t.

While on it:
* Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:31 +01:00
Bartlomiej Zolnierkiewicz 8ac2b42a45 ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag
* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base().

* Factor out code for forcing host out of "simplex" mode from
  ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper.

* Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229),
  amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and
  serverworks (for CSB5) host drivers.

* Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag
  instead of checking dev->device (BTW the code was buggy because it didn't
  check for dev->vendor, luckily none of these PCI Device IDs was used by
  some other vendor for PCI IDE controller).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:30 +01:00
Sergei Shtylyov ecf3279639 ide: ide_setup_dma() assumes 8 ports
According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must
always register 8 DMA ports with ide_setup_dma(), so its last argument is not
needed. While at it, kill some useless parens in that function...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:30 +01:00
Bartlomiej Zolnierkiewicz 9ac59226ca ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:09 +01:00
Bartlomiej Zolnierkiewicz 79127c37aa ide: use ide_init_port_hw() in setup-pci.c
* Move setting hwif->gendev.parent from ide_pci_setup_ports()
  to ide_hwif_configure().

* Always set hwif->io_ports in ide_hwif_configure().

* Use ide_init_port_hw() in ide_hwif_configure().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:08 +01:00
Bartlomiej Zolnierkiewicz 6828fc9a91 ide: always use ide_std_init_ports() in setup-pci.c
* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure()
  doesn't depend on the default cotrol register offset, default IRQ
  or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports()
  can always be used.

* Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET]
  is also non-zero always clear hwif->noprobe.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:08 +01:00
Bartlomiej Zolnierkiewicz ade2daf9c6 ide: make remaining built-in only IDE host drivers modular (take 2)
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:07 +01:00
Bartlomiej Zolnierkiewicz f01393e48c ide: merge ->fixup and ->quirkproc methods
* Assign drive->quirk_list in ->quirkproc implementations:
  - hpt366.c::hpt3xx_quirkproc()
  - pdc202xx_new.c::pdcnew_quirkproc()
  - pdc202xx_old.c::pdc202xx_quirkproc()

* Make ->quirkproc void.

* Move calling ->quirkproc from do_identify() to probe_hwif().

* Convert it821x_fixups() to it821x_quirkproc() in it821x.c.

* Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove
  no longer needed drive->present check from is_dev_seagate_sata().

* Convert ide_undecoded_slave() to accept 'drive' instead of 'hwif'
  as an argument.  Then convert ide_register_hw() to accept 'quirkproc'
  argument instead of 'fixup' one.

* Remove no longer needed ->fixup method.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:03 +01:00
Bartlomiej Zolnierkiewicz aea5d37560 ide: (hopefully) fix VDMA for CS5520
* Set the correct hwif->dma_base for the second channel in
  ide_get_or_set_dma_base().

* Remove DMA enable code from cs5520_set_pio_mode(), this can
  be handled by the generic ->dma_host_on method now.

* Add VDMA check to ide_config_drive_speed().

* drive->using_dma was never enabled since cs5520 host driver's
  ->ide_dma_on method overrided the generic ->ide_dma_on (so
  __ide_dma_on() was never called, drive->using_dma was never set
  and VDMA was never used since it depends on drive->using_dma).

  Fix it by using ->dma_host_on method instead of ->ide_dma_on
  (also add matching ->dma_host_off method).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:12:59 +01:00
Bartlomiej Zolnierkiewicz 1b7d3477a7 ide: coding style fixes for drivers/ide/setup-pci.c
* remove trailing whitespaces
* 'if()' -> 'if ()'
* remove extra new-line before EXPORT_SYMBOL_GPL()
* add extra new-line after 'id' definition
* respect 80-columns limit

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-12 23:31:57 +01:00
Bartlomiej Zolnierkiewicz 125a8191dc ide: fix ide_scan_pcibus() error message
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-12 23:31:57 +01:00
Bartlomiej Zolnierkiewicz 0fd4980fa7 ide: remove stale/incorrect comment from setup-pci.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:16 +01:00
Bartlomiej Zolnierkiewicz bde07e5eab ide: enhance ide_setup_pci_noise()
* Print PCI device Vendor ID, Device ID and revision in
  ide_setup_pci_noise().

* Remove no longer needed PCI device revision printing from
  ide_setup_pci_controller().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:36 +02:00
Bartlomiej Zolnierkiewicz 8562043606 ide: constify struct ide_port_info
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:34 +02:00
Bartlomiej Zolnierkiewicz 039788e153 ide: replace ide_pci_device_t by struct ide_port_info
* Rename struct ide_pci_device_s to struct ide_port_info.

* Remove ide_pci_device_t typedef.

While at it:

* Fix __ide_pci_register_driver() comment.

* Fix aec62xx_init_one() comment.

* Remove unused 'cds' field from ide_hwgroup_t.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:34 +02:00
Bartlomiej Zolnierkiewicz 9239b33393 ide: remove write-only hwif->hw
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:33 +02:00
Bartlomiej Zolnierkiewicz 847ddd2bbe ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead
of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz 8447d9d52a ide: add ide_device_add()
* Add ide_device_add() helper and convert host drivers to use it
  instead of open-coded variants.

* Make ide_pci_setup_ports() and do_ide_setup_pci_device()
  take 'u8 *idx' argument instead of 'ata_index_t *index'.

* Remove no longer needed ata_index_t.

* Unexport probe_hwif_init() and make it static.

* Unexport ide_proc_register_port().

There should be no functionality changes caused by this patch
(sgiioc4.c: ide_proc_register_port() requires hwif->present
 to be set and it won't be set if probe_hwif_init() fails).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz fd9bb53942 ide: add ->fixup method to ide_hwif_t
* Add ->fixup method to ide_hwif_t.

* Set hwif->fixup in ide_pci_setup_ports() to d->fixup.

* Use hwif->fixup in probe_hwif().

* Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in
  ide_setup_pci_device().

* Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup,
  update all ide_register_hw() users accordingly.

* Convert ide-cs/delkin_cb host drivers to use ide_register_hw().

* Restore hwif->fixup in ide_hwif_restore().

* Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()
  and 'fixup' argument from probe_hwif().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Bartlomiej Zolnierkiewicz caea7602f3 ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flags
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports()
to set drive->{io_32bit,unmask} for both drives on the interface.  Convert
amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags.

While at it:

* Add IDE_HFLAGS_AMD define (amd74xx host driver).

* Add IDE_HFLAGS_VIA define (via82cxxx host driver).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz 272a370900 ide: add IDE_HFLAG_RQSIZE_256 host flag
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set
hwif->rqsize to 256 sectors.  Convert pdc202xx_old host driver to use it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz 8acf28c090 ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flag
Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports()
to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI
and via82cxxx host drivers to use it.

While at it:

* Add IDE_HFLAGS_UMC define (generic IDE PCI host driver).

* Remove no longer needed init_hwif_generic() (generic IDE PCI host driver).

* Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz 528a572dae ide: add ->chipset field to ide_pci_device_t
Add ->chipset field to ide_pci_device_t and use it in ide_hwif_configure()
to set hwif->chipset.  Convert cmd64x, cy82c693, rz1000 and trm290 host
drivers to use this new ability.

While at it define hwif_chipset_t as u8 to save some space in hw_regs_t,
ide_hwif_t and ide_pci_device_t instances.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:30 +02:00
Bartlomiej Zolnierkiewicz cf6e854efb ide: fix disabled ports reporting for PCI controllers
Report all disabled ports in ide_pci_setup_ports() (prevents the bogus
warning when ide_hwif_configure()->ide_match_hwif() fails to find free
ide_hwifs[] slots).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:29 +02:00
Bartlomiej Zolnierkiewicz 85ad93ad56 ide: set drive->autotune in ide_pci_setup_ports()
Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:

generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method

it821x.c:
* if memory allocation fails drive->autotune won't be set
  (but there also won't be ->set_pio_mode method in such case)

piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)

However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19 00:30:12 +02:00
Bartlomiej Zolnierkiewicz 3985ee3b4c ide: add IDE_HFLAG_LEGACY_IRQS host flag
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.

While at it:

* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19 00:30:11 +02:00
Bartlomiej Zolnierkiewicz 1c51361a98 ide: add IDE_HFLAG_SERIALIZE host flag
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set
hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers
to use it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19 00:30:10 +02:00