Actually, the decimal representation of a 32-bit signed number can take 12
bytes, including the \0.
And then some code adds a \n as well, so let's give it 13 bytes.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The integer divisions in the timer accounting code can round the result
down to 0. Adding 0 is without effect and the signal delivery stops.
Clamp the division result to minimum 1 to avoid this.
Problem was reported by Seongbae Park <spark@google.com>, who provided
also an inital patch.
Roland sayeth:
I have had some more time to think about the problem, and to reproduce it
using Toyo's test case. For the record, if my understanding of the problem
is correct, this happens only in one very particular case. First, the
expiry time has to be so soon that in cputime_t units (usually 1s/HZ ticks)
it's < nthreads so the division yields zero. Second, it only affects each
thread that is so new that its CPU time accumulation is zero so now+0 is
still zero and ->it_*_expires winds up staying zero. For the VIRT and PROF
clocks when cputime_t is tick granularity (or the SCHED clock on
configurations where sched_clock's value only advances on clock ticks), this
is not hard to arrange with new threads starting up and blocking before they
accumulate a whole tick of CPU time. That's what happens in Toyo's test
case.
Note that in general it is fine for that division to round down to zero,
and set each thread's expiry time to its "now" time. The problem only
arises with thread's whose "now" value is still zero, so that now+0 winds up
0 and is interpreted as "not set" instead of ">= now". So it would be a
sufficient and more precise fix to just use max(ticks, 1) inside the loop
when setting each it_*_expires value.
But, it does no harm to round the division up to one and always advance
every thread's expiry time. If the thread didn't already fire timers for
the expiry time of "now", there is no expectation that it will do so before
the next tick anyway. So I followed Thomas's patch in lifting the max out
of the loops.
This patch also covers the reload cases, which are harder to write a test
for (and I didn't try). I've tested it with Toyo's case and it fixes that.
[toyoa@mvista.com: fix: min_t -> max_t]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Seongbae Park <spark@google.com>
Cc: Peter Mattis <pmattis@google.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I have seen mdadm oops after successfully unloading md module.
This patch privents from unloading md module while
mdadm is polling /proc/mdstat.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If remove_mapping() failed to remove the page from its mapping, don't go and
mark it not uptodate! Makes kernel go dead.
(Actually, I don't think the ClearPageUptodate is needed there at all).
Says Nick Piggin:
"Right, it isn't needed because at this point the page is guaranteed
by remove_mapping to have no references (except us) and cannot pick
up any new ones because it is removed from pagecache.
We can delete it."
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is Eric Sesterhenn's jbd patch applied to jbd2.
Commit: 41716c7c21
His words:
Since commit d1807793e1 we dereference a NULL
pointer. Coverity id #1432. We set journal to NULL, and use it directly
afterwards.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avoid possible PIT livelock issues seen on SMP systems (and reported by
Andi), by not allowing it as a clocksource on SMP boxes.
However, since the PIT may no longer be present, we have to properly handle
the cases where SMP systems have TSC skew and fall back from the TSC.
Since the PIT isn't there, it would "fall back" to the TSC again. So this
changes the jiffies rating to 1, and the TSC-bad rating value to 0.
Thus you will get the following behavior priority on i386 systems:
tsc [if present & stable]
hpet [if present]
cyclone [if present]
acpi_pm [if present]
pit [if UP]
jiffies
Rather then the current more complicated:
tsc [if present & stable]
hpet [if present]
cyclone [if present]
acpi_pm [if present]
pit [if cpus < 4]
tsc [if present & unstable]
jiffies
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I will be taking over after Russell King as the new maintainer of the
MMC layer.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In general, lockdep warnings are intended to be non-fatal, so I have put in
various practical limits on internal data structure failure modes. We haven't
had a /single/ lockdep-internal crash ever since lockdep went upstream [the
unwinder crashes are outside of lockdep], and that's largely due to the good
internal checks it does.
Recursion within the dependency graph is currently limited to 20, that's
probably not enough on some many-CPU boxes - this patch doubles it to 40. I
have written the lockdep functions to have as small stackframes as possible,
so 40 should be OK too. (The practical recursion limit should be somewhere
between 100 and 200 entries. If we hit that then I'll change the algorithm to
be iteration-based. Graph walking logic is so easy to program via recursion,
so i'd like to keep recursion as long as possible.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove reference to PAGE_SIZE that causes errors if PAGE_SIZE != 4096
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future. As such it is now a
misnomer for the IOC4 base device driver to live under drivers/sn, and
would complicate builds for non-SN2.
This patch moves the IOC4 base driver code from drivers/sn to drivers/misc,
and updates the associated Makefiles and Kconfig files to allow building on
non-SN2 configs. Due to the resulting change in link order, it is now
necessary to use late_initcall() for IOC4 subdriver initialization.
[akpm@osdl.org: __udivdi3 fix]
[akpm@osdl.org: fix default in Kconfig]
Acked-by: Pat Gefre <pfg@sgi.com>
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future. As such dependencies on
SN2-specific features and config dependencies need to be removed.
This patch updates the Kconfig files to remove the config dependency, and
updates the IOC4 bus speed detection routine to use universally available
time interfaces instead of mmtimer.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The telecom clock driver for MPBL0010 ATCA SBC depends on X86
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7371
sys_epoll_pwait needs to be listed as a conditional (weak)
entry point for CONFIG_EPOLL=n.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
[Bluetooth] Use work queue to trigger URB submission
[Bluetooth] Add locking for bt_proto array manipulation
[Bluetooth] Check if DLC is still attached to the TTY
[Bluetooth] Fix reference count when connection lookup fails
[Bluetooth] Disconnect HID interrupt channel first
[Bluetooth] Support concurrent connect requests
[Bluetooth] Make use of virtual devices tree
[Bluetooth] Handle return values from driver core functions
[Bluetooth] Fix compat ioctl for BNEP, CMTP and HIDP
[IPV6] sit: Add missing MODULE_LICENSE
[IPV6]: Remove bogus WARN_ON in Proxy-NA handling.
[IPv6] rules: Use RT6_LOOKUP_F_HAS_SADDR and fix source based selectors
[XFRM]: Fix xfrm_state_num going negative.
[NET]: reduce sizeof(struct inet_peer), cleanup, change in peer_check_expire()
NetLabel: the CIPSOv4 passthrough mapping does not pass categories correctly
NetLabel: better error handling involving mls_export_cat()
NetLabel: only deref the CIPSOv4 standard map fields when using standard mapping
[BRIDGE]: flush forwarding table when device carrier off
[NETFILTER]: ctnetlink: Remove debugging messages
[NETFILTER]: Update MAINTAINERS entry
...
Use inc/dec_preempt_count() rather than preempt_enable/disable() and manually
add in the compiler barriers that were provided by the latter. This makes FRV
consistent with other archs.
Furthermore, the compiler barrier effects are now there unconditionally - at
least as far as preemption is concerned - because we don't want the compiler
moving memory accesses out of the section of code in which the mapping is in
force - in effect the kmap_atomic() must imply a LOCK-class barrier and the
kunmap_atomic() must imply an UNLOCK-class barrier to the compiler.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is known that 2 LSI Logic MegaRAID SATA RAID Controllers (150-4 and
150-6) don't support 64-bit DMA. Unfortunately currently this check is
wrong and driver sets 64-bit DMA mode for these devices.
Signed-off-by: Andrey Mirkin <amirkin@sw.ru>
Acked-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Without this the user can feed in bogus values and get very bogus
results. Security impact is minimal as this ioctl isn't available to
unpriviledged processes anyway.
Reported to the l/k list and found with an auditing tool.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Found by an analysis tool and reported to the list. Fix is simple enough
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The bcm203x firmware loading driver uses a timer to trigger the URB
submission. It is better to use a work queue instead.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The bt_proto array needs to be protected by some kind of locking to
prevent a race condition between bt_sock_create and bt_sock_register.
And in addition all calls to sk_alloc need to be made GFP_ATOMIC now.
Signed-off-by: Masatake YAMATO <jet@gyve.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If the DLC device is no longer attached to the TTY device, then it
makes no sense to go through with changing the termios settings.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the connection lookup for the device structure fails, the reference
count for the HCI device needs to be decremented.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The Bluetooth HID specification demands that the interrupt channel
shall be disconnected first. This is needed to pass the qualification
tests.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Most Bluetooth chips don't support concurrent connect requests, because
this would involve a multiple baseband page with only one radio. In the
case an upper layer like L2CAP requests a concurrent connect these chips
return the error "Command Disallowed" for the second request. If this
happens it the responsibility of the Bluetooth core to queue the request
and try again after the previous connect attempt has been completed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The Bluetooth subsystem currently uses a platform device for devices
with no parent. It is a better idea to use the new virtual devices
tree for these.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some return values of the driver core register and create functions
are not handled and so might cause unexpected problems.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There exists no attempt do deal with the fact that a structure with
a uint32_t followed by a pointer is going to be different for 32-bit
and 64-bit userspace. Any 32-bit process trying to use it will be
failing with -EFAULT if it's lucky; suffering from having data dumped
at a random address if it's not.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This is missing the MODULE_LICENSE statements and taints the kernel
upon loading. License is obvious from the beginning of the file.
Signed-off-by: Jan Dittmer <jdi@l4x.org>
Signed-off-by: Joerg Roedel <joro-lkml@zlug.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes rt6_lookup() to provide the source address in the flow
and sets RT6_LOOKUP_F_HAS_SADDR whenever it is present in
the flow.
Avoids unnecessary prefix comparisons by checking for a prefix
length first.
Fixes the rule logic to not match packets if a source selector
has been specified but no source address is available.
Thanks to Kim Nordlund <kim.nordlund@nokia.com> for working
on this patch with me.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Missing counter bump when hashing in a new ACQ
xfrm_state.
Now that we have two spots to do the hash grow
check, break it out into a helper function.
Signed-off-by: David S. Miller <davem@davemloft.net>
The CIPSO passthrough mapping had a problem when sending categories which
would cause no or incorrect categories to be sent on the wire with a packet.
This patch fixes the problem which was a simple off-by-one bug.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Upon inspection it looked like the error handling for mls_export_cat() was
rather poor. This patch addresses this by NULL'ing out kfree()'d pointers
before returning and checking the return value of the function everywhere
it is called.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fix several places in the CIPSO code where it was dereferencing fields which
did not have valid pointers by moving those pointer dereferences into code
blocks where the pointers are valid.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Flush the forwarding table when carrier is lost. This helps for
availability because we don't want to forward to a downed device and
new packets may come in on other links.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove (compilation-breaking) debugging messages introduced at early
development stage.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONNSECMARK needs conntrack, add missing dependency to fix linking error
with CONNSECMARK=y and CONNTRACK=m.
Reported by Toralf Förster <toralf.foerster@gmx.de>.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even though the tos field is only a single byte large, the values need to
be converted to net-endian for the checkum update so they are in the
corrent byte position. Also fix incorrect endian annotations.
Reported by Stephane Chazelas <Stephane_Chazelas@yahoo.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I need this patch to get a UML kernel to compile. This is with the
kernel headers in FC6 which are automatically generated from the kernel
tree. Some headers are missing but those files don't need them. At
least it appears so since the resuling kernel works fine.
Tested on x86-64.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
.. and clean up the file mapping code while at it. No point in having a
"if (file)" repeated twice, and generally doing similar checks in two
different sections of the same code
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is silly to use non-static variable for writting zeroes to the file.
And more seriously, foffset in core dump file dump function was incremented
too much, so some parts of core dump were shifted by size of few phdrs and
notes down, so although gdb was able to load that file, it did not make lot
of sense - in my test case data pages were shifted down by about 900 bytes.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (4750): AGC command1/2 is board specific
V4L/DVB (4748): Fixed oops for Nova-T USB2
V4L/DVB (4746): HM12 is YUV 4:2:0, not YUV 4:1:1
V4L/DVB (4744): The Samsung TCPN2121P30A does not have a tda9887
V4L/DVB (4743): Fix oops in VIDIOC_G_PARM
V4L/DVB (4742): Drivers/media/video: handle sysfs errors
V4L/DVB (4741): {ov511,stv680}: handle sysfs errors
V4L/DVB (4740): Fixed an if-block to avoid floating with debug-messages
V4L/DVB (4739): SECAM support for saa7113 into saa7115
V4L/DVB (4738): Bt8xx/dvb-bt8xx.c: check kmalloc() return value.
V4L/DVB (4734): Tda826x: fix frontend selection for dvb_attach
V4L/DVB (4733): Tda10086: fix frontend selection for dvb_attach
V4L/DVB (4732): Fix spelling error in Kconfig help text for DVB_CORE_ATTACH
V4L/DVB (4731a): Kconfig: restore pvrusb2 menu items
V4L/DVB (4729): Fix VIDIOC_G_FMT for NTSC in cx25840.
V4L/DVB (4727): Support status readout for saa713x based FM radio
V4L/DVB (4725): Fix vivi compile on parisc
V4L/DVB (4692): Add WinTV-HVR3000 DVB-T support
Andrew Morton