Make the IMA action flag handling generic in order to support
additional new actions, without requiring changes to the base
implementation. New actions, like audit logging, will only
need to modify the define statements.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When AUDIT action support is added to the IMA,
ima_must_appraise_or_measure() does not reflect the real meaning anymore.
Rename it to ima_get_action().
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds support for digital signature based integrity appraisal.
With this patch, 'security.ima' contains either the file data hash or
a digital signature of the file data hash. The file data hash provides
the security attribute of file integrity. In addition to file integrity,
a digital signature provides the security attribute of authenticity.
Unlike EVM, when the file metadata changes, the digital signature is
replaced with an HMAC, modification of the file data does not cause the
'security.ima' digital signature to be replaced with a hash. As a
result, after any modification, subsequent file integrity appraisals
would fail.
Although digitally signed files can be modified, but by not updating
'security.ima' to reflect these modifications, in essence digitally
signed files could be considered 'immutable'.
IMA uses a different keyring than EVM. While the EVM keyring should not
be updated after initialization and locked, the IMA keyring should allow
updating or adding new keys when upgrading or installing packages.
Changelog v4:
- Change IMA_DIGSIG to hex equivalent
Changelog v3:
- Permit files without any 'security.ima' xattr to be labeled properly.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
IMA-appraisal currently verifies the integrity of a file based on a
known 'good' measurement value. This patch reserves the first byte
of 'security.ima' as a place holder for the type of method used for
verifying file data integrity.
Changelog v1:
- Use the newly defined 'struct evm_ima_xattr_data'
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Based on xattr_permission comments, the restriction to modify 'security'
xattr is left up to the underlying fs or lsm. Ensure that not just anyone
can modify or remove 'security.ima'.
Changelog v1:
- Unless IMA-APPRAISE is configured, use stub ima_inode_removexattr()/setxattr()
functions. (Moved ima_inode_removexattr()/setxattr() to ima_appraise.c)
Changelog:
- take i_mutex to fix locking (Dmitry Kasatkin)
- ima_reset_appraise_flags should only be called when modifying or
removing the 'security.ima' xattr. Requires CAP_SYS_ADMIN privilege.
(Incorporated fix from Roberto Sassu)
- Even if allowed to update security.ima, reset the appraisal flags,
forcing re-appraisal.
- Replace CAP_MAC_ADMIN with CAP_SYS_ADMIN
- static inline ima_inode_setxattr()/ima_inode_removexattr() stubs
- ima_protect_xattr should be static
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
For performance, replace the iint spinlock with rwlock/read_lock.
Eric Paris questioned this change, from spinlocks to rwlocks, saying
"rwlocks have been shown to actually be slower on multi processor
systems in a number of cases due to the cache line bouncing required."
Based on performance measurements compiling the kernel on a cold
boot with multiple jobs with/without this patch, Dmitry Kasatkin
and I found that rwlocks performed better than spinlocks, but very
insignificantly. For example with total compilation time around 6
minutes, with rwlocks time was 1 - 3 seconds shorter... but always
like that.
Changelog v2:
- new patch taken from the 'allocating iint improvements' patch
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
With IMA-appraisal's removal of the iint mutex and taking the i_mutex
instead, allocating the iint becomes a lot simplier, as we don't need
to be concerned with two processes racing to allocate the iint. This
patch cleans up and improves performance for allocating the iint.
- removed redundant double i_mutex locking
- combined iint allocation with tree search
Changelog v2:
- removed the rwlock/read_lock changes from this patch
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Unlike the IMA measurement policy, the appraise policy can not be dependent
on runtime process information, such as the task uid, as the 'security.ima'
xattr is written on file close and must be updated each time the file changes,
regardless of the current task uid.
This patch extends the policy language with 'fowner', defines an appraise
policy, which appraises all files owned by root, and defines 'ima_appraise_tcb',
a new boot command line option, to enable the appraise policy.
Changelog v3:
- separate the measure from the appraise rules in order to support measuring
without appraising and appraising without measuring.
- change appraisal default for filesystems without xattr support to fail
- update default appraise policy for cgroups
Changelog v1:
- don't appraise RAMFS (Dmitry Kasatkin)
- merged rest of "ima: ima_must_appraise_or_measure API change" commit
(Dmtiry Kasatkin)
ima_must_appraise_or_measure() called ima_match_policy twice, which
searched the policy for a matching rule. Once for a matching measurement
rule and subsequently for an appraisal rule. Searching the policy twice
is unnecessary overhead, which could be noticeable with a large policy.
The new version of ima_must_appraise_or_measure() does everything in a
single iteration using a new version of ima_match_policy(). It returns
IMA_MEASURE, IMA_APPRAISE mask.
With the use of action mask only one efficient matching function
is enough. Removed other specific versions of matching functions.
Changelog:
- change 'owner' to 'fowner' to conform to the new LSM conditions posted by
Roberto Sassu.
- fix calls to ima_log_string()
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
IMA currently maintains an integrity measurement list used to assert the
integrity of the running system to a third party. The IMA-appraisal
extension adds local integrity validation and enforcement of the
measurement against a "good" value stored as an extended attribute
'security.ima'. The initial methods for validating 'security.ima' are
hashed based, which provides file data integrity, and digital signature
based, which in addition to providing file data integrity, provides
authenticity.
This patch creates and maintains the 'security.ima' xattr, containing
the file data hash measurement. Protection of the xattr is provided by
EVM, if enabled and configured.
Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata
integrity and, assuming success, compares the file's current hash value
with the one stored as an extended attribute in 'security.ima'.
Changelov v4:
- changed iint cache flags to hex values
Changelog v3:
- change appraisal default for filesystems without xattr support to fail
Changelog v2:
- fix audit msg 'res' value
- removed unused 'ima_appraise=' values
Changelog v1:
- removed unused iint mutex (Dmitry Kasatkin)
- setattr hook must not reset appraised (Dmitry Kasatkin)
- evm_verifyxattr() now differentiates between no 'security.evm' xattr
(INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the
'security.evm' (INTEGRITY_NOXATTRS).
- replace hash_status with ima_status (Dmitry Kasatkin)
- re-initialize slab element ima_status on free (Dmitry Kasatkin)
- include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA
- merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin)
- removed unnecessary error variable in process_measurement() (Dmitry Kasatkin)
- use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured
(moved ima_inode_post_setattr() to ima_appraise.c)
- make sure ima_collect_measurement() can read file
Changelog:
- add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin)
- fix the race condition between chmod, which takes the i_mutex and then
iint->mutex, and ima_file_free() and process_measurement(), which take
the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin)
- cleanup of ima_appraise_measurement() (Dmitry Kasatkin)
- changes as a result of the iint not allocated for all regular files, but
only for those measured/appraised.
- don't try to appraise new/empty files
- expanded ima_appraisal description in ima/Kconfig
- IMA appraise definitions required even if IMA_APPRAISE not enabled
- add return value to ima_must_appraise() stub
- unconditionally set status = INTEGRITY_PASS *after* testing status,
not before. (Found by Joe Perches)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
IMA auditing code was compiled even when CONFIG_AUDIT was not enabled.
This patch compiles auditing code only when possible and enabled.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Set ima_initialized only if initialization was successful.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
IMA cannot be used as module and does not need __exit functions.
Removed them.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The IMA measurement list contains filename hints, which can be
ambigious without the full pathname. This patch replaces the
filename hint with the full pathname, simplifying for userspace
the correlating of file hash measurements with files.
Change log v1:
- Revert to short filenames, when full pathname is longer than IMA
measurement buffer size. (Based on Dmitry's review)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When IMA was first upstreamed, the bprm filename and interp were
always the same. Currently, the bprm->filename and bprm->interp
are the same, except for when only bprm->interp contains the
interpreter name. So instead of using the bprm->filename as
the IMA filename hint in the measurement list, we could replace
it with bprm->interp, but this feels too fragil.
The following patch is not much better, but at least there is some
indication that sometimes we're passing the filename and other times
the interpreter name.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Fix IMA kconfig warning on non-X86 architectures:
warning: (IMA) selects TCG_TIS which has unmet direct dependencies
(TCG_TPM && X86)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The audit res field ususally indicates success with a 1 and 0 for a
failure. So make IMA do it the same way.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().
Changelog v1:
- Change __cred to just cred (based on David Howell's comment)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Similar to SIGNATURE, rename INTEGRITY_DIGSIG to INTEGRITY_SIGNATURE.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>
It was reported that DIGSIG is confusing name for digital signature
module. It was suggested to rename DIGSIG to SIGNATURE.
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>
The use of s_id should go through the untrusted string path, just to be
extra careful.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
There is a small chance of racing during tfm allocation.
This patch fixes it.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
On multi-core systems, setting of the key before every caclculation,
causes invalid HMAC calculation for other tfm users, because internal
state (ipad, opad) can be invalid before set key call returns.
It needs to be set only once during initialization.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Info about new measurements are cached in the iint for performance. When
the inode is flushed from cache, the associated iint is flushed as well.
Subsequent access to the inode will cause the inode to be re-measured and
will attempt to add a duplicate entry to the measurement list.
This patch frees the duplicate measurement memory, fixing a memory leak.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: stable@vger.kernel.org
There is a small chance of racing during tfm allocation.
This patch fixes it.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
On multi-core systems, setting of the key before every caclculation,
causes invalid HMAC calculation for other tfm users, because internal
state (ipad, opad) can be invalid before set key call returns.
It needs to be set only once during initialization.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fix build errors by adding Kconfig dependency on KEYS.
CRYPTO dependency removed.
CC security/integrity/digsig.o
security/integrity/digsig.c: In function ?integrity_digsig_verify?:
security/integrity/digsig.c:38:4: error: implicit declaration of function ?request_key?
security/integrity/digsig.c:38:17: error: ?key_type_keyring? undeclared (first use in this function)
security/integrity/digsig.c:38:17: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [security/integrity/digsig.o] Error 1
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>
This patch adds support for digital signature verification to EVM.
With this feature file metadata can be protected using digital
signature instead of an HMAC. When building an image,
which has to be flashed to different devices, an HMAC cannot
be used to sign file metadata, because the HMAC key should be
different on every device.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Define separate keyrings for each of the different use cases - evm, ima,
and modules. Using different keyrings improves search performance, and also
allows "locking" specific keyring to prevent adding new keys.
This is useful for evm and module keyrings, when keys are usually only
added from initramfs.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits)
um: fix ubd cow size
um: Fix kmalloc argument order in um/vdso/vma.c
um: switch to use of drivers/Kconfig
UserModeLinux-HOWTO.txt: fix a typo
UserModeLinux-HOWTO.txt: remove ^H characters
um: we need sys/user.h only on i386
um: merge delay_{32,64}.c
um: distribute exports to where exported stuff is defined
um: kill system-um.h
um: generic ftrace.h will do...
um: segment.h is x86-only and needed only there
um: asm/pda.h is not needed anymore
um: hw_irq.h can go generic as well
um: switch to generic-y
um: clean Kconfig up a bit
um: a couple of missing dependencies...
um: kill useless argument of free_chan() and free_one_chan()
um: unify ptrace_user.h
um: unify KSTK_...
um: fix gcov build breakage
...
When allocating from slab, initialization is done the first time in
init_once() and subsequently on free. Because evm_status was not
re-initialized on free, evm_verify_hmac() skipped verifications.
This patch re-initializes evm_status.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Before permitting 'security.evm' to be updated, 'security.evm' must
exist and be valid. In the case that there are no existing EVM protected
xattrs, it is safe for posix acls to update the mode bits.
To differentiate between no 'security.evm' xattr and no xattrs used to
calculate 'security.evm', this patch defines INTEGRITY_NOXATTR.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
The posix xattr acls are 'system' prefixed, which normally would not
affect security.evm. An interesting side affect of writing posix xattr
acls is their modifying of the i_mode, which is included in security.evm.
This patch updates security.evm when posix xattr acls are written.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
evm_protect_xattr unnecessarily validates the current security.evm
integrity, before updating non-evm protected extended attributes
and other file metadata. This patch limits validating the current
security.evm integrity to evm protected metadata.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
All tristates selected by EVM(boolean) are forced to be builtin, except
in the TCG_TPM(tristate) dependency case. Arnaud Lacombe summarizes the
Kconfig bug as, "So it would seem direct dependency state influence the
state of reverse dependencies.." For a detailed explanation, refer to
Arnaud Lacombe's posting http://lkml.org/lkml/2011/8/23/498.
With the "encrypted-keys: remove trusted-keys dependency" patch, EVM
can now be built without a dependency on TCG_TPM. The trusted-keys
dependency requires trusted-keys to either be builtin or not selected.
This dependency will prevent the boolean/tristate mismatch from
occuring.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>,
Randy Dunlap <rdunlap@xenotimenet>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Fixes sparse warnings:
security/integrity/ima/ima_main.c:105:6: warning: symbol 'ima_file_free' was not declared. Should it be static?
security/integrity/ima/ima_main.c:167:5: warning: symbol 'ima_file_mmap' was not declared. Should it be static?
security/integrity/ima/ima_main.c:192:5: warning: symbol 'ima_bprm_check' was not declared. Should it be static?
security/integrity/ima/ima_main.c:211:5: warning: symbol 'ima_file_check' was not declared. Should it be static?
Signed-off-by: James Morris <jmorris@namei.org>
Fixes sparse warning:
security/integrity/ima/ima_fs.c:290:5: warning: symbol 'ima_open_policy' was not declared. Should it be static?
Signed-off-by: James Morris <jmorris@namei.org>
Although the EVM encrypted-key should be encrypted/decrypted using a
trusted-key, a user-defined key could be used instead. When using a user-
defined key, a TCG_TPM dependency should not be required. Unfortunately,
the encrypted-key code needs to be refactored a bit in order to remove
this dependency.
This patch adds the TCG_TPM dependency.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>,
Randy Dunlap <rdunlap@xenotimenet>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
evm_inode_init_security() should return 0, when EVM is not enabled.
(Returning an error is a remnant of evm_inode_post_init_security.)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Select trusted and encrypted keys if EVM is selected, to ensure
the requisite symbols are available. Otherwise, these can be
selected as modules while EVM is static, leading to a kernel
build failure.
Signed-off-by: James Morris <jmorris@namei.org>
Permit changing of security.evm only when valid, unless in fixmode.
Reported-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
We will use digital signatures in addtion to hmac.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
If EVM is not supported or enabled, evm_verify_hmac() returns
INTEGRITY_UNKNOWN, which ima_appraise_measurement() ignores and sets
the appraisal status based solely on the security.ima verification.
evm_verify_hmac() also returns INTEGRITY_UNKNOWN for other failures, such
as temporary failures like -ENOMEM, resulting in possible attack vectors.
This patch changes the default return code for temporary/unexpected
failures, like -ENOMEM, from INTEGRITY_UNKNOWN to INTEGRITY_FAIL, making
evm_verify_hmac() fail safe.
As a result, failures need to be re-evaluated in order to catch both
temporary errors, such as the -ENOMEM, as well as errors that have been
resolved in fix mode.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Using shash is more efficient, because the algorithm is allocated only
once. Only the descriptor to store the hash state needs to be allocated
for every operation.
Changelog v6:
- check for crypto_shash_setkey failure
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Initialize 'security.evm' for new files.
Changelog v7:
- renamed evm_inode_post_init_security to evm_inode_init_security
- moved struct xattr definition to earlier patch
- allocate xattr name
Changelog v6:
- Use 'struct evm_ima_xattr_data'
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Imbed the evm calls evm_inode_setxattr(), evm_inode_post_setxattr(),
evm_inode_removexattr() in the security hooks. evm_inode_setxattr()
protects security.evm xattr. evm_inode_post_setxattr() and
evm_inode_removexattr() updates the hmac associated with an inode.
(Assumes an LSM module protects the setting/removing of xattr.)
Changelog:
- Don't define evm_verifyxattr(), unless CONFIG_INTEGRITY is enabled.
- xattr_name is a 'const', value is 'void *'
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
EVM protects a file's security extended attributes(xattrs) against integrity
attacks. The current patchset maintains an HMAC-sha1 value across the security
xattrs, storing the value as the extended attribute 'security.evm'. We
anticipate other methods for protecting the security extended attributes.
This patch reserves the first byte of 'security.evm' as a place holder for
the type of method.
Changelog v6:
- move evm_ima_xattr_type definition to security/integrity/integrity.h
- defined a structure for the EVM xattr called evm_ima_xattr_data
(based on Serge Hallyn's suggestion)
- removed unnecessary memset
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
EVM protects a file's security extended attributes(xattrs) against integrity
attacks. This patchset provides the framework and an initial method. The
initial method maintains an HMAC-sha1 value across the security extended
attributes, storing the HMAC value as the extended attribute 'security.evm'.
Other methods of validating the integrity of a file's metadata will be posted
separately (eg. EVM-digital-signatures).
While this patchset does authenticate the security xattrs, and
cryptographically binds them to the inode, coming extensions will bind other
directory and inode metadata for more complete protection. To help simplify
the review and upstreaming process, each extension will be posted separately
(eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the
proposed Linux integrity subsystem, refer to Dave Safford's whitepaper:
http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf.
EVM depends on the Kernel Key Retention System to provide it with a
trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the
root's keyring using keyctl. Until EVM receives notification that the key has
been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can
not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
Loading the key and signaling EVM should be done as early as possible. Normally
this is done in the initramfs, which has already been measured as part of the
trusted boot. For more information on creating and loading existing
trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A
sample dracut patch, which loads the trusted/encrypted key and enables EVM, is
available from http://linux-ima.sourceforge.net/#EVM.
Based on the LSMs enabled, the set of EVM protected security xattrs is defined
at compile. EVM adds the following three calls to the existing security hooks:
evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To
initialize and update the 'security.evm' extended attribute, EVM defines three
calls: evm_inode_post_init(), evm_inode_post_setattr() and
evm_inode_post_removexattr() hooks. To verify the integrity of a security
xattr, EVM exports evm_verifyxattr().
Changelog v7:
- Fixed URL in EVM ABI documentation
Changelog v6: (based on Serge Hallyn's review)
- fix URL in patch description
- remove evm_hmac_size definition
- use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size)
- moved linux include before other includes
- test for crypto_hash_setkey failure
- fail earlier for invalid key
- clear entire encrypted key, even on failure
- check xattr name length before comparing xattr names
Changelog:
- locking based on i_mutex, remove evm_mutex
- using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1
operation.
- replaced crypto hash with shash (Dmitry Kasatkin)
- support for additional methods of verifying the security xattrs
(Dmitry Kasatkin)
- iint not allocated for all regular files, but only for those appraised
- Use cap_sys_admin in lieu of cap_mac_admin
- Use __vfs_setxattr_noperm(), without permission checks, from EVM
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Move the inode integrity data(iint) management up to the integrity directory
in order to share the iint among the different integrity models.
Changelog:
- don't define MAX_DIGEST_SIZE
- rename several globally visible 'ima_' prefixed functions, structs,
locks, etc to 'integrity_'
- replace '20' with SHA1_DIGEST_SIZE
- reflect location change in appropriate Kconfig and Makefiles
- remove unnecessary initialization of iint_initialized to 0
- rebased on current ima_iint.c
- define integrity_iint_store/lock as static
There should be no other functional changes.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
The original ima_must_measure() function based its results on cached
iint information, which required an iint be allocated for all files.
Currently, an iint is allocated only for files in policy. As a result,
for those files in policy, ima_must_measure() is now called twice: once
to determine if the inode is in the measurement policy and, the second
time, to determine if it needs to be measured/re-measured.
The second call to ima_must_measure() unnecessarily checks to see if
the file is in policy. As we already know the file is in policy, this
patch removes the second unnecessary call to ima_must_measure(), removes
the vestige iint parameter, and just checks the iint directly to determine
if the inode has been measured or needs to be measured/re-measured.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
Now that i_readcount is maintained by the VFS layer, remove the
imbalance checking in IMA. Cleans up the IMA code nicely.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
ima_counts_get() updated the readcount and invalidated the PCR,
as necessary. Only update the i_readcount in the VFS layer.
Move the PCR invalidation checks to ima_file_check(), where it
belongs.
Maintaining the i_readcount in the VFS layer, will allow other
subsystems to use i_readcount.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.
This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.
Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.
default IMA TCB policy:
# PROC_SUPER_MAGIC
dont_measure fsmagic=0x9fa0
# SYSFS_MAGIC
dont_measure fsmagic=0x62656572
# DEBUGFS_MAGIC
dont_measure fsmagic=0x64626720
# TMPFS_MAGIC
dont_measure fsmagic=0x01021994
# SECURITYFS_MAGIC
dont_measure fsmagic=0x73636673
< LSM specific rule >
dont_measure obj_type=var_log_t
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=FILE_CHECK mask=MAY_READ uid=0
Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured. The patch
prevents the default TCB policy from being replaced.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current logic looks like this:
rc = ima_must_measure(NULL, inode, MAY_READ, FILE_CHECK);
if (rc < 0)
goto out;
if (mode & FMODE_WRITE) {
if (inode->i_readcount)
send_tomtou = true;
goto out;
}
if (atomic_read(&inode->i_writecount) > 0)
send_writers = true;
Lets assume we have a policy which states that all files opened for read
by root must be measured.
Lets assume the file has permissions 777.
Lets assume that root has the given file open for read.
Lets assume that a non-root process opens the file write.
The non-root process will get to ima_counts_get() and will check the
ima_must_measure(). Since it is not supposed to measure it will goto
out.
We should check the i_readcount no matter what since we might be causing
a ToMToU voilation!
This is close to correct, but still not quite perfect. The situation
could have been that root, which was interested in the mesurement opened
and closed the file and another process which is not interested in the
measurement is the one holding the i_readcount ATM. This is just overly
strict on ToMToU violations, which is better than not strict enough...
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently for every removed inode IMA must take a global lock and search
the IMA rbtree looking for an associated integrity structure. Instead
we explicitly mark an inode when we add an integrity structure so we
only have to take the global lock and do the removal if it exists.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since finding a struct ima_iint_cache requires a valid struct inode, and
the struct ima_iint_cache is supposed to have the same lifetime as a
struct inode (technically they die together but don't need to be created
at the same time) we don't have to worry about the ima_iint_cache
outliving or dieing before the inode. So the refcnt isn't useful. Just
get rid of it and free the structure when the inode is freed.
Signed-off-by: Eric Paris <eapris@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IMA always allocates an integrity structure to hold information about
every inode, but only needed this structure to track the number of
readers and writers currently accessing a given inode. Since that
information was moved into struct inode instead of the integrity struct
this patch stops allocating the integrity stucture until it is needed.
Thus greatly reducing memory usage.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IMA currently allocated an inode integrity structure for every inode in
core. This stucture is about 120 bytes long. Most files however
(especially on a system which doesn't make use of IMA) will never need
any of this space. The problem is that if IMA is enabled we need to
know information about the number of readers and the number of writers
for every inode on the box. At the moment we collect that information
in the per inode iint structure and waste the rest of the space. This
patch moves those counters into the struct inode so we can eventually
stop allocating an IMA integrity structure except when absolutely
needed.
This patch does the minimum needed to move the location of the data.
Further cleanups, especially the location of counter updates, may still
be possible.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IMA tracks the number of struct files which are holding a given inode
readonly and the number which are holding the inode write or r/w. It
needs this information so when a new reader or writer comes in it can
tell if this new file will be able to invalidate results it already made
about existing files.
aka if a task is holding a struct file open RO, IMA measured the file
and recorded those measurements and then a task opens the file RW IMA
needs to note in the logs that the old measurement may not be correct.
It's called a "Time of Measure Time of Use" (ToMToU) issue. The same is
true is a RO file is opened to an inode which has an open writer. We
cannot, with any validity, measure the file in question since it could
be changing.
This patch attempts to use the i_writecount field to track writers. The
i_writecount field actually embeds more information in it's value than
IMA needs but it should work for our purposes and allow us to shrink the
struct inode even more.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently IMA used the iint->mutex to protect the i_readcount and
i_writecount. This patch uses the inode->i_lock since we are going to
start using in inode objects and that is the most appropriate lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IMA flags is an unsigned long but there is only 1 flag defined.
Lets save a little space and make it a char. This packs nicely next to
the array of u8's.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently IMA uses 2 longs in struct inode. To save space (and as it
seems impossible to overflow 32 bits) we switch these to unsigned int.
The switch to unsigned does require slightly different checks for
underflow, but it isn't complex.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The opencount was used to help debugging to make sure that everything
which created a struct file also correctly made the IMA calls. Since we
moved all of that into the VFS this isn't as necessary. We should be
able to get the same amount of debugging out of just the reader and
write count.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IMA code needs to store the number of tasks which have an open fd
granting permission to write a file even when IMA is not in use. It
needs this information in order to be enabled at a later point in time
without losing it's integrity garantees.
At the moment that means we store a little bit of data about every inode
in a cache. We use a radix tree key'd on the inode's memory address.
Dave Chinner pointed out that a radix tree is a terrible data structure
for such a sparse key space. This patch switches to using an rbtree
which should be more efficient.
Bug report from Dave:
"I just noticed that slabtop was reporting an awfully high usage of
radix tree nodes:
OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
4200331 2778082 66% 0.55K 144839 29 2317424K radix_tree_node
2321500 2060290 88% 1.00K 72581 32 2322592K xfs_inode
2235648 2069791 92% 0.12K 69864 32 279456K iint_cache
That is, 2.7M radix tree nodes are allocated, and the cache itself is
consuming 2.3GB of RAM. I know that the XFS inodei caches are indexed
by radix tree node, but for 2 million cached inodes that would mean a
density of 1 inode per radix tree node, which for a system with 16M
inodes in the filsystems is an impossibly low density. The worst I've
seen in a production system like kernel.org is about 20-25% density,
which would mean about 150-200k radix tree nodes for that many inodes.
So it's not the inode cache.
So I looked up what the iint_cache was. It appears to used for
storing per-inode IMA information, and uses a radix tree for indexing.
It uses the *address* of the struct inode as the indexing key. That
means the key space is extremely sparse - for XFS the struct inode
addresses are approximately 1000 bytes apart, which means the closest
the radix tree index keys get is ~1000. Which means that there is a
single entry per radix tree leaf node, so the radix tree is using
roughly 550 bytes for every 120byte structure being cached. For the
above example, it's probably wasting close to 1GB of RAM...."
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 8262bb85da allocated the inode integrity struct (iint) before any
inodes were created. Only after IMA was initialized in late_initcall were
the counters updated. This patch updates the counters, whether or not IMA
has been initialized, to resolve 'imbalance' messages.
This patch fixes the bug as reported in bugzilla: 15673. When the i915
is builtin, the ring_buffer is initialized before IMA, causing the
imbalance message on suspend.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: David Safford<safford@watson.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
The default for llseek will change to no_llseek,
so securityfs users need to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Of the three uses of kref_set in the kernel:
One really should be kref_put as the code is letting go of a
reference,
Two really should be kref_init because the kref is being
initialised.
This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ACPI dependency moved to the TPM, where it belongs. Although
IMA per-se does not require access to the bios measurement log,
verifying the IMA boot aggregate does, which requires ACPI.
This patch prereq's 'TPM: ACPI/PNP dependency removal'
http://lkml.org/lkml/2010/5/4/378.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reported-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
The ACPI dependency moved to the TPM, where it belongs. Although
IMA per-se does not require access to the bios measurement log,
verifying the IMA boot aggregate does, which requires ACPI.
This patch prereq's 'TPM: ACPI/PNP dependency removal'
http://lkml.org/lkml/2010/5/4/378.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reported-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
As an example IMA emits a warning when it can't find a TPM chip:
"No TPM chip found, activating TPM-bypass!"
This patch prefaces that message with IMA so we know what subsystem is
bypassing the TPM. Do this for all pr_info and pr_err messages.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
integrity_audit_msg() uses "integrity:" in the audit message. This
violates the (loosely defined) audit system requirements that everything be
a key=value pair and it doesn't provide additional information. This can
be obviously gleaned from the message type. Just drop it.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Convert all of the places IMA calls audit_log_format with %s into
audit_log_untrusted_string(). This is going to cause them all to get
quoted, but it should make audit log injection harder.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
IMA policy load parser will reject any policies with a comment. This patch
will allow the parser to just ignore lines which start with a #. This is not
very robust. # can ONLY be used at the very beginning of a line. Inline
comments are not allowed.
Signed-off-by: Eric Paris
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
IMA parser will fail if whitespace is used in any way other than a single
space. Using a tab or even using 2 spaces in a row will result in a policy
being rejected. This patch makes the kernel ignore whitespace a bit better.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Currently the ima policy load code will print what it doesn't understand
but really I think it should reject any policy it doesn't understand. This
patch makes it so!
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
ima_parse_rule currently sets entry->action = -1 and then later tests
if (entry->action == UNKNOWN). It is true that UNKNOWN == -1 but actually
setting it to UNKNOWN makes a lot more sense in case things change in the
future.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
IMA will accept rules which specify things twice and will only pay
attention to the last one. We should reject such rules.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Currently IMA will only accept one rule per write(). This patch allows IMA to
accept writes which contain multiple rules but only processes one rule per
write. \n is used as the delimiter between rules. IMA will return a short
write indicating that it only accepted up to the first \n.
This allows simple userspace utilities like cat to be used to load an IMA
policy instead of needing a special userspace utility that understood 'one
write per rule'
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
As noted by checkpatch.pl, __func__ should be used instead of gcc
specific __FUNCTION__.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: James Morris <jmorris@namei.org>
If radix_tree_preload is failed in ima_inode_alloc, we don't need
radix_tree_preload_end because kernel is alread preempt enabled
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
With the movement of the ima hooks functions were renamed from *path* to
*file* since they always deal with struct file. This patch renames some of
the ima internal flags to make them consistent with the rest of the code.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_path_check actually deals with files! call it ima_file_check instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima wants to create an inode information struct (iint) when inodes are
allocated. This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created. To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function. Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The "Untangling ima mess, part 2 with counters" patch messed
up the counters. Based on conversations with Al Viro, this patch
streamlines ima_path_check() by removing the counter maintaince.
The counters are now updated independently, from measuring the file,
in __dentry_open() and alloc_file() by calling ima_counts_get().
ima_path_check() is called from nfsd and do_filp_open().
It also did not measure all files that should have been measured.
Reason: ima_path_check() got bogus value passed as mask.
[AV: mea culpa]
[AV: add missing nfsd bits]
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Limit the number of imbalance messages to once per filesystem type instead of
once per system boot. (it's actually slightly racy and could give you a
couple per fs, but this isn't a real issue)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kill the 'update' argument of ima_path_check(), kill
dead code in ima.
Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one. Which happens exactly in two places - alloc_file()
and __dentry_open(). Nothing else needs to do that at
all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_inode_free() has some funky #define just to confuse the crap out of me.
void ima_iint_delete(struct inode *inode)
and then things actually call ima_inode_free() and nothing calls
ima_iint_delete().
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently have a lot of duplicated code around ima file counts. Clean
that all up.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iints are supposed to be allocated when an inode is allocated (during
security_inode_alloc()) But we have code which will attempt to allocate
an iint during measurement calls. If we couldn't allocate the iint and we
cared, we should have died during security_inode_alloc(). Not make the
code more complex and less efficient.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_inode_alloc returns 0 and 1, but the LSM hooks expects an errno.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
While running fsstress tests on the NFSv4 mounted ext3 and ext4
filesystem, the following call trace was generated on the nfs
server machine.
Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a
potential deadlock.
=================================
[ INFO: inconsistent lock state ]
2.6.31-31.el6.x86_64 #1
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes:
(jbd2_handle){+.+.?.}, at: [<ffffffff811edd5e>] jbd2_journal_start+0xfe/0x13f
{RECLAIM_FS-ON-W} state was registered at:
[<ffffffff81091e40>] mark_held_locks+0x65/0x99
[<ffffffff81091f31>] lockdep_trace_alloc+0xbd/0xf5
[<ffffffff81126fdd>] kmem_cache_alloc+0x40/0x185
[<ffffffff812344d7>] ima_iint_insert+0x3d/0xf1
[<ffffffff812345b0>] ima_inode_alloc+0x25/0x44
[<ffffffff811484ac>] inode_init_always+0xec/0x271
[<ffffffff81148682>] alloc_inode+0x51/0xa1
[<ffffffff81148700>] new_inode+0x2e/0x94
[<ffffffff811b2f08>] ext4_new_inode+0xb8/0xdc9
[<ffffffff811be611>] ext4_create+0xcf/0x175
[<ffffffff8113e2cd>] vfs_create+0x82/0xb8
[<ffffffff8113f337>] do_filp_open+0x32c/0x9ee
[<ffffffff811309b9>] do_sys_open+0x6c/0x12c
[<ffffffff81130adc>] sys_open+0x2e/0x44
[<ffffffff81011e42>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 90371
hardirqs last enabled at (90371): [<ffffffff8112708d>]
kmem_cache_alloc+0xf0/0x185
hardirqs last disabled at (90370): [<ffffffff81127026>]
kmem_cache_alloc+0x89/0x185
softirqs last enabled at (89492): [<ffffffff81068ecf>]
__do_softirq+0x1bf/0x1eb
softirqs last disabled at (89477): [<ffffffff8101312c>] call_softirq+0x1c/0x30
other info that might help us debug this:
2 locks held by kswapd2/75:
#0: (shrinker_rwsem){++++..}, at: [<ffffffff810f98ba>] shrink_slab+0x44/0x177
#1: (&type->s_umount_key#25){++++..}, at: [<ffffffff811450ba>]
Reported-by: Muni P. Beerakam <mbeeraka@in.ibm.com>
Reported-by: Amit K. Arora <amitarora@in.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Based on discussions on LKML and LSM, where there are consecutive
security_ and ima_ calls in the vfs layer, move the ima_ calls to
the existing security_ hooks.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.
This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.
- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>
ima_counts_get() calls ima_iint_find_insert_get() which takes a reference
to the iint in question, but does not put that reference at the end of the
function. This can lead to a nasty memory leak. Easy enough to reproduce:
#include <sys/mman.h>
#include <stdio.h>
int main (void)
{
int i;
void *ptr;
for (i=0; i < 100000; i++) {
ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_SHARED|MAP_ANONYMOUS, -1, 0);
if (ptr == MAP_FAILED)
return 2;
munmap(ptr, 4096);
}
return 0;
}
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Hashing files larger than INT_MAX causes process to loop.
Dependent on redefining kernel_read() offset type to loff_t.
(http://bugzilla.kernel.org/show_bug.cgi?id=13909)
Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Until we start appraising measurements, the ima_path_check()
return code should always be 0.
- Update the ima_path_check() return code comment
- Instead of the pr_info, audit the dentry_open failure
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
- Add support in ima_path_check() for integrity checking without
incrementing the counts. (Required for nfsd.)
- rename and export opencount_get to ima_counts_get
- replace ima_shm_check calls with ima_counts_get
- export ima_path_check
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
A number of IMA functions only used during init are not marked with __init.
Add those notations so they are freed automatically.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
The IMA TCB policy is dangerous. A normal use can use all of a system's
memory (which cannot be freed) simply by building and running lots of
executables. The TCB policy is also nearly useless because logging in as root
often causes a policy violation when dealing with utmp, thus rendering the
measurements meaningless.
There is no good fix for this in the kernel. A full TCB policy would need to
be loaded in userspace using LSM rule matching to get both a protected and
useful system. But, if too little is measured before userspace can load a real
policy one again ends up with a meaningless set of measurements. One option
would be to put the policy load inside the initrd in order to get it early
enough in the boot sequence to be useful, but this runs into trouble with the
LSM. For IMA to measure the LSM policy and the LSM policy loading mechanism
it needs rules to do so, but we already talked about problems with defaulting
to such broad rules....
IMA also depends on the files being measured to be on an FS which implements
and supports i_version. Since the only FS with this support (ext4) doesn't
even use it by default it seems silly to have any IMA rules by default.
This should reduce the performance overhead of IMA to near 0 while still
letting users who choose to configure their machine as such to inclue the
ima_tcb kernel paramenter and get measurements during boot before they can
load a customized, reasonable policy in userspace.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
The selinuxfs superblock magic is used inside the IMA code, but is being
defined in two places and could someday get out of sync. This patch moves the
declaration into magic.h so it is only done once.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
The IMA default policy measures every single file opened by root. This is
terrible for most users. Consider a system (like mine) with virtual machine
images. When those images are touched (which happens at boot for me) those
images are measured. This is just way too much for the default case.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
The IMA policy file does not implement read. Trying to just open/read/close
the file will load a blank policy and you cannot then change the policy
without a reboot. This removes the read permission from the file so one must
at least be attempting to write...
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
If IMA tried to measure a file which was larger than 4G dentry_open would fail
with -EOVERFLOW since IMA wasn't passing O_LARGEFILE. This patch passes
O_LARGEFILE to all IMA opens to avoid this problem.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Currently IMA does not handle failures from dentry_open(). This means that we
leave a pointer set to ERR_PTR(errno) and then try to use it just a few lines
later in fput(). Oops.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Proper invocation of the current credentials is to use current_cred() not
current->cred. This patches makes IMA use the new method.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Based on a request from Eric Paris to simplify parsing, replace
audit_log_format statements containing "%s" with audit_log_string().
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
An audit subsystem change replaced AUDIT_EQUAL with Audit_equal.
Update calls to security_filter_rule_init()/match() to reflect
the change.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Based on Andrew Morton's comments:
- add missing locks around radix_tree_lookup in ima_iint_insert()
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
IMA_LSM_RULES requires AUDIT. This is automatic if SECURITY_SELINUX=y
but not when SECURITY_SMACK=y (and SECURITY_SELINUX=n), so make the
dependency explicit. This fixes the following build error:
security/integrity/ima/ima_policy.c:111:error: implicit declaration of function 'security_audit_rule_match'
security/integrity/ima/ima_policy.c:230:error: implicit declaration of function 'security_audit_rule_init'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Based on discussions on linux-audit, as per Steve Grubb's request
http://lkml.org/lkml/2009/2/6/269, the following changes were made:
- forced audit result to be either 0 or 1.
- made template names const
- Added new stand-alone message type: AUDIT_INTEGRITY_RULE
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
The number of calls to ima_path_check()/ima_file_free()
should be balanced. An extra call to fput(), indicates
the file could have been accessed without first being
measured.
Although f_count is incremented/decremented in places other
than fget/fput, like fget_light/fput_light and get_file, the
current task must already hold a file refcnt. The call to
__fput() is delayed until the refcnt becomes 0, resulting
in ima_file_free() flagging any changes.
- add hook to increment opencount for IPC shared memory(SYSV),
shmat files, and /dev/zero
- moved NULL iint test in opencount_get()
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Sequentialize access to the policy file
- permit multiple attempts to replace default policy with a valid policy
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Support for a user loadable policy through securityfs
with support for LSM specific policy data.
- free invalid rule in ima_parse_add_rule()
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Make the measurement lists available through securityfs.
- removed test for NULL return code from securityfs_create_file/dir
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
IMA provides hardware (TPM) based measurement and attestation for
file measurements. As the Trusted Computing (TPM) model requires,
IMA measures all files before they are accessed in any way (on the
integrity_bprm_check, integrity_path_check and integrity_file_mmap
hooks), and commits the measurements to the TPM. Once added to the
TPM, measurements can not be removed.
In addition, IMA maintains a list of these file measurements, which
can be used to validate the aggregate value stored in the TPM. The
TPM can sign these measurements, and thus the system can prove, to
itself and to a third party, the system's integrity in a way that
cannot be circumvented by malicious or compromised software.
- alloc ima_template_entry before calling ima_store_template()
- log ima_add_boot_aggregate() failure
- removed unused IMA_TEMPLATE_NAME_LEN
- replaced hard coded string length with #define name
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Dmitry Kasatkin