Commit Graph

1151 Commits

Author SHA1 Message Date
Martin K. Petersen 9504e0864b block: Fix topology stacking for data and discard alignment
The stacking code incorrectly scaled up the data offset in some cases
causing misaligned devices to report alignment.  Rewrite the stacking
algorithm to remedy this and apply the same alignment principles to the
discard handling.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-21 15:55:51 +01:00
Vivek Goyal 65b32a573e cfq-iosched: Remove prio_change logic for workload selection
o CFQ now internally divides cfq queues in therr workload categories. sync-idle,
  sync-noidle and async. Which workload to run depends primarily on rb_key
  offset across three service trees. Which is a combination of mulitiple things
  including what time queue got queued on the service tree.

  There is one exception though. That is if we switched the prio class, say
  we served some RT tasks and again started serving BE class, then with-in
  BE class we always started with sync-noidle workload irrespective of rb_key
  offset in service trees.

  This can provide better latencies for sync-noidle workload in the presence
  of RT tasks.

o This patch gets rid of that exception and which workload to run with-in
  class always depends on lowest rb_key across service trees. The reason
  being that now we have multiple BE class groups and if we always switch
  to sync-noidle workload with-in group, we can potentially starve a sync-idle
  workload with-in group. Same is true for async workload which will be in
  root group. Also the workload-switching with-in group will become very
  unpredictable as it now depends whether some RT workload was running in
  the system or not.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Vivek Goyal fb104db41e cfq-iosched: Get rid of nr_groups
o Currently code does not seem to be using cfqd->nr_groups. Get rid of it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Vivek Goyal 1db32c4060 cfq-iosched: Remove the check for same cfq group from allow_merge
o allow_merge() already checks if submitting task is pointing to same cfqq
  as rq has been queued in. If everything is fine, we should not be having
  a task in one cgroup and having a pointer to cfqq in other cgroup.

  Well I guess in some situations it can happen and that is, when a random
  IO queue has been moved into root cgroup for group_isolation=0. In
  this case, tasks's cgroup/group is different from where actually cfqq is,
  but this is intentional and in this case merging should be allowed.

  The second situation is where due to close cooperator patches, multiple
  processes can be sharing a cfqq. If everything implemented right, we should
  not end up in a situation where tasks from different processes in different
  groups are sharing the same cfqq as we allow merging of cooperating queues
  only if they are in same group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18 12:40:21 +01:00
Jens Axboe b568be627a block: temporarily disable discard granularity
Commit 86b3728141 adds a check for
misaligned stacking offsets, but it's buggy since the defaults are 0.
Hence all dm devices that pass in a non-zero starting offset will
be marked as misaligned amd dm will complain.

A real fix is coming, in the mean time disable the discard granularity
check so that users don't worry about dm reporting about misaligned
devices.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-16 09:16:41 +01:00
Linus Torvalds 51b736b851 Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block:
  cfq: set workload as expired if it doesn't have any slice left
  Fix a CFQ crash in "for-2.6.33" branch of block tree
  cfq: Remove wait_request flag when idle time is being deleted
  cfq-iosched: commenting non-obvious initialization
  cfq-iosched: Take care of corner cases of group losing share due to deletion
  cfq-iosched: Get rid of cfqq wait_busy_done flag
  cfq: Optimization for close cooperating queue searching
  block,xd: Delay allocation of DMA buffers until device is known
  drbd: Following the hmac change to SHASH (see linux commit 8bd1209cff)
  cfq-iosched: reduce write depth only if sync was delayed
2009-12-15 09:11:28 -08:00
Gui Jianfeng 66ae291978 cfq: set workload as expired if it doesn't have any slice left
When a group is resumed, if it doesn't have workload slice left,
we should set workload_expires as expired. Otherwise, we might
start from where we left in previous group by error.
Thanks the idea from Corrado.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-15 10:08:45 +01:00
Vivek Goyal 82bbbf28db Fix a CFQ crash in "for-2.6.33" branch of block tree
I think my previous patch introduced a bug which can lead to CFQ hitting
BUG_ON().

The offending commit in for-2.6.33 branch is.

commit 7667aa0630
Author: Vivek Goyal <vgoyal@redhat.com>
Date:   Tue Dec 8 17:52:58 2009 -0500

    cfq-iosched: Take care of corner cases of group losing share due to deletion

While doing some stress testing on my box, I enountered following.

login: [ 3165.148841] BUG: scheduling while
atomic: swapper/0/0x10000100
[ 3165.149821] Modules linked in: cfq_iosched dm_multipath qla2xxx igb
scsi_transport_fc dm_snapshot [last unloaded: scsi_wait_scan]
[ 3165.149821] Pid: 0, comm: swapper Not tainted
2.6.32-block-for-33-merged-new #3
[ 3165.149821] Call Trace:
[ 3165.149821]  <IRQ>  [<ffffffff8103fab8>] __schedule_bug+0x5c/0x60
[ 3165.149821]  [<ffffffff8103afd7>] ? __wake_up+0x44/0x4d
[ 3165.149821]  [<ffffffff8153a979>] schedule+0xe3/0x7bc
[ 3165.149821]  [<ffffffff8103a796>] ? cpumask_next+0x1d/0x1f
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff810422d8>] __cond_resched+0x2a/0x35
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff8153b1ee>] _cond_resched+0x2c/0x37
[ 3165.149821]  [<ffffffff8100e2db>] is_valid_bugaddr+0x16/0x2f
[ 3165.149821]  [<ffffffff811e4161>] report_bug+0x18/0xac
[ 3165.149821]  [<ffffffff8100f1fc>] die+0x39/0x63
[ 3165.149821]  [<ffffffff8153cde1>] do_trap+0x11a/0x129
[ 3165.149821]  [<ffffffff8100d470>] do_invalid_op+0x96/0x9f
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff81034b4d>] ? enqueue_task+0x5c/0x67
[ 3165.149821]  [<ffffffff8103ae83>] ? task_rq_unlock+0x11/0x13
[ 3165.149821]  [<ffffffff81041aae>] ? try_to_wake_up+0x292/0x2a4
[ 3165.149821]  [<ffffffff8100c935>] invalid_op+0x15/0x20
[ 3165.149821]  [<ffffffffa000b21d>] ? cfq_dispatch_requests+0x6ba/0x93e
[cfq_iosched]
[ 3165.149821]  [<ffffffff810df5a6>] ? virt_to_head_page+0xe/0x2f
[ 3165.149821]  [<ffffffff811d8c2a>] blk_peek_request+0x191/0x1a7
[ 3165.149821]  [<ffffffff811e5b8d>] ? kobject_get+0x1a/0x21
[ 3165.149821]  [<ffffffff812c8d4c>] scsi_request_fn+0x82/0x3df
[ 3165.149821]  [<ffffffff8110b2de>] ? bio_fs_destructor+0x15/0x17
[ 3165.149821]  [<ffffffff810df5a6>] ? virt_to_head_page+0xe/0x2f
[ 3165.149821]  [<ffffffff811d931f>] __blk_run_queue+0x42/0x71
[ 3165.149821]  [<ffffffff811d9403>] blk_run_queue+0x26/0x3a
[ 3165.149821]  [<ffffffff812c8761>] scsi_run_queue+0x2de/0x375
[ 3165.149821]  [<ffffffff812b60ac>] ? put_device+0x17/0x19
[ 3165.149821]  [<ffffffff812c92d7>] scsi_next_command+0x3b/0x4b
[ 3165.149821]  [<ffffffff812c9b9f>] scsi_io_completion+0x1c9/0x3f5
[ 3165.149821]  [<ffffffff812c3c36>] scsi_finish_command+0xb5/0xbe

I think I have hit following BUG_ON() in cfq_dispatch_request().

BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));

Please find attached the patch to fix it. I have done some stress testing
with it and have not seen it happening again.

o We should wait on a queue even after slice expiry only if it is empty. If
  queue is not empty then continue to expire it.

o If we decide to keep the queue then make cfqq=NULL. Otherwise select_queue()
  will return a valid cfqq and cfq_dispatch_request() can hit following
  BUG_ON().

  BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list))

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-10 19:25:41 +01:00
Gui Jianfeng 554554f60a cfq: Remove wait_request flag when idle time is being deleted
Remove wait_request flag when idle time is being deleted, otherwise
it'll hit this path every time when a request is enqueued.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-10 09:38:39 +01:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Corrado Zoccolo edc71131c4 cfq-iosched: commenting non-obvious initialization
Added a comment to explain the initialization of last_delayed_sync.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 20:56:04 +01:00
Vivek Goyal 7667aa0630 cfq-iosched: Take care of corner cases of group losing share due to deletion
If there is a sequential reader running in a group, we wait for next request
to come in that group after slice expiry and once new request is in, we expire
the queue. Otherwise we delete the group from service tree and group looses
its fair share.

So far I was marking a queue as wait_busy if it had consumed its slice and
it was last queue in the group. But this condition did not cover following
two cases.

1.If a request completed and slice has not expired yet. Next request comes
  in and is dispatched to disk. Now select_queue() hits and slice has expired.
  This group will be deleted. Because request is still in the disk, this queue
  will never get a chance to wait_busy.

2.If request completed and slice has not expired yet. Before next request
  comes in (delay due to think time), select_queue() hits and expires the
  queue hence group. This queue never got a chance to wait busy.

Gui was hitting the boundary condition 1 and not getting fairness numbers
proportional to weight.

This patch puts the checks for above two conditions and improves the fairness
numbers for sequential workload on rotational media. Check in select_queue()
takes care of case 1 and additional check in should_wait_busy() takes care
of case 2.

Reported-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:04 +01:00
Vivek Goyal c244bb50a9 cfq-iosched: Get rid of cfqq wait_busy_done flag
o Get rid of wait_busy_done flag. This flag only tells we were doing wait
  busy on a queue and that queue got request so expire it. That information
  can easily be obtained by (cfq_cfqq_wait_busy() && queue_is_not_empty). So
  remove this flag and keep code simple.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:03 +01:00
Gui Jianfeng b9d8f4c73b cfq: Optimization for close cooperating queue searching
It doesn't make any sense to try to find out a close cooperating
queue if current cfqq is the only one in the group.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 15:11:03 +01:00
Corrado Zoccolo 573412b295 cfq-iosched: reduce write depth only if sync was delayed
The introduction of ramp-up formula for async queue depths has
slowed down dirty page reclaim, by reducing async write performance.
This patch makes sure the formula kicks in only when sync request
was recently delayed.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-09 12:32:55 +01:00
Vivek Goyal 878eaddd05 cfq-iosched: Do not access cfqq after freeing it
Fix a crash during boot reported by Jeff Moyer. Fix the issue of accessing
cfqq after freeing it.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-12-07 19:37:15 +01:00
Stephen Rothwell accee7854b block: include linux/err.h to use ERR_PTR
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-07 09:47:07 +01:00
Jens Axboe bb729bc98c cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
After the merge of the IO controller patches, booting on my megaraid
box ran much slower. Vivek Goyal traced it down to megaraid discovery
creating tons of devices, each suffering a grace period when they later
kill that queue (if no device is found).

So lets use call_rcu() to batch these deferred frees, instead of taking
the grace period hit for each one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-06 09:54:19 +01:00
Vivek Goyal 846954b0a3 blkio: Allow CFQ group IO scheduling even when CFQ is a module
o Now issues of blkio controller and CFQ in module mode should be fixed.
  Enable the cfq group scheduling support in module mode.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Vivek Goyal 3e25206689 blkio: Implement dynamic io controlling policy registration
o One of the goals of block IO controller is that it should be able to
  support mulitple io control policies, some of which be operational at
  higher level in storage hierarchy.

o To begin with, we had one io controlling policy implemented by CFQ, and
  I hard coded the CFQ functions called by blkio. This created issues when
  CFQ is compiled as module.

o This patch implements a basic dynamic io controlling policy registration
  functionality in blkio. This is similar to elevator functionality where
  ioschedulers register the functions dynamically.

o Now in future, when more IO controlling policies are implemented, these
  can dynakically register with block IO controller.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Vivek Goyal 9d6a986c0b blkio: Export some symbols from blkio as its user CFQ can be a module
o blkio controller is inside the kernel and cfq makes use of interfaces
  exported by blkio. CFQ can be a module too, hence export symbols used
  by CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:38:14 +01:00
Louis Rilling b69f229206 block: Fix io_context leak after failure of clone with CLONE_IO
With CLONE_IO, parent's io_context->nr_tasks is incremented, but never
decremented whenever copy_process() fails afterwards, which prevents
exit_io_context() from calling IO schedulers exit functions.

Give a task_struct to exit_io_context(), and call exit_io_context() instead of
put_io_context() in copy_process() cleanup path.

Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:36:18 +01:00
Louis Rilling 61cc74fbb8 block: Fix io_context leak after clone with CLONE_IO
With CLONE_IO, copy_io() increments both ioc->refcount and ioc->nr_tasks.
However exit_io_context() only decrements ioc->refcount if ioc->nr_tasks
reaches 0.

Always call put_io_context() in exit_io_context().

Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 16:36:18 +01:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Shaohua Li 3c764b7a65 cfq-iosched: make nonrot check logic consistent
cfq_arm_slice_timer() has logic to disable idle window for SSD device. The same
thing should be done at cfq_select_queue() too, otherwise we will still see
idle window. This makes the nonrot check logic consistent in cfq.
Tests in a intel SSD with low_latency knob close, below patch can triple disk
thoughput for muti-thread sequential read.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 13:12:06 +01:00
Jens Axboe 237e5bc4e5 io controller: quick fix for blk-cgroup and modular CFQ
It's currently not an allowed configuration, so express that in Kconfig.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 10:07:38 +01:00
Jens Axboe f2eecb9152 cfq-iosched: move IO controller declerations to a header file
They should not be declared inside some other file that's not related
to CFQ.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-04 10:06:35 +01:00
Jens Axboe 2f5ea47712 cfq-iosched: fix compile problem with !CONFIG_CGROUP
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 21:07:17 +01:00
Vivek Goyal c04645e592 blkio: Wait on sync-noidle queue even if rq_noidle = 1
o rq_noidle() is supposed to tell cfq that do not expect a request after this
  one, hence don't idle. But this does not seem to work very well. For example
  for direct random readers, rq_noidle = 1 but there is next request coming
  after this. Not idling, leads to a group not getting its share even if
  group_isolation=1.

o The right solution for this issue is to scan the higher layers and set
  right flag (WRITE_SYNC or WRITE_ODIRECT). For the time being, this single
  line fix helps. This should not have any significant impact when we are
  not using cgroups. I will later figure out IO paths in higher layer and
  fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal ae30c28655 blkio: Implement group_isolation tunable
o If a group is running only a random reader, then it will not have enough
  traffic to keep disk busy and we will reduce overall throughput. This
  should result in better latencies for random reader though. If we don't
  idle on random reader service tree, then this random reader will experience
  large latencies if there are other groups present in system with sequential
  readers running in these.

o One solution suggested by corrado is that by default keep the random readers
  or sync-noidle workload in root group so that during one dispatch round
  we idle only once on sync-noidle tree. This means that all the sync-idle
  workload queues will be in their respective group and we will see service
  differentiation in those but not on sync-noidle workload.

o Provide a tunable group_isolation. If set, this will make sure that even
  sync-noidle queues go in their respective group and we wait on these. This
  provides stronger isolation between groups but at the expense of throughput
  if group does not have enough traffic to keep the disk busy.

o By default group_isolation = 0

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f26bd1f0a3 blkio: Determine async workload length based on total number of queues
o Async queues are not per group. Instead these are system wide and maintained
  in root group. Hence their workload slice length should be calculated
  based on total number of queues in the system and not just queues in the
  root group.

o As root group's default weight is 1000, make sure to charge async queue
  more in terms of vtime so that it does not get more time on disk because
  root group has higher weight.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f75edf2dc8 blkio: Wait for cfq queue to get backlogged if group is empty
o If a queue consumes its slice and then gets deleted from service tree, its
  associated group will also get deleted from service tree if this was the
  only queue in the group. That will make group loose its share.

o For the queues on which we have idling on and if these have used their
  slice, wait a bit for these queues to get backlogged again and then
  expire these queues so that group does not loose its share.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal f8d461d692 blkio: Propagate cgroup weight updation to cfq groups
o Propagate blkio cgroup weight updation to associated cfq groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:53 +01:00
Vivek Goyal 24610333d5 blkio: Drop the reference to queue once the task changes cgroup
o If a task changes cgroup, drop reference to the cfqq associated with io
  context and set cfqq pointer stored in ioc to NULL so that upon next request
  arrival we will allocate a  new queue in new group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 8682e1f15f blkio: Provide some isolation between groups
o Do not allow following three operations across groups for isolation.
	- selection of co-operating queues
	- preemtpions across groups
	- request merging across groups.

o Async queues are currently global and not per group. Allow preemption of
  an async queue if a sync queue in other group gets backlogged.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 220841906f blkio: Export disk time and sectors used by a group to user space
o Export disk time and sector used by a group to user space through cgroup
  interface.

o Also export a "dequeue" interface to cgroup which keeps track of how many
  a times a group was deleted from service tree. Helps in debugging.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 2868ef7b39 blkio: Some debugging aids for CFQ
o Some debugging aids for CFQ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal b1c3576961 blkio: Take care of cgroup deletion and cfq group reference counting
o One can choose to change elevator or delete a cgroup. Implement group
  reference counting so that both elevator exit and cgroup deletion can
  take place gracefully.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25fb5169d4 blkio: Dynamic cfq group creation based on cgroup tasks belongs to
o Determine the cgroup IO submitting task belongs to and create the cfq
  group if it does not exist already.

o Also link cfqq and associated cfq group.

o Currently all async IO is mapped to root group.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal dae739ebc4 blkio: Group time used accounting and workload context save restore
o This patch introduces the functionality to do the accounting of group time
  when a queue expires. This time used decides which is the group to go
  next.

o Also introduce the functionlity to save and restore the workload type
  context with-in group. It might happen that once we expire the cfq queue
  and group, a different group will schedule in and we will lose the context
  of the workload type. Hence save and restore it upon queue expiry.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 58ff82f34c blkio: Implement per cfq group latency target and busy queue avg
o So far we had 300ms soft target latency system wide. Now with the
  introduction of cfq groups, divide that latency by number of groups so
  that one can come up with group target latency which will be helpful
  in determining the workload slice with-in group and also the dynamic
  slice length of the cfq queue.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 25bc6b0776 blkio: Introduce per cfq group weights and vdisktime calculations
o Bring in the per cfq group weight and how vdisktime is calculated for the
  group. Also bring in the functionality of updating the min_vdisktime of
  the group service tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:52 +01:00
Vivek Goyal 31e4c28d95 blkio: Introduce blkio controller cgroup interface
o This is basic implementation of blkio controller cgroup interface. This is
  the common interface visible to user space and should be used by different
  IO control policies as we implement those.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal 1fa8f6d68b blkio: Introduce the root service tree for cfq groups
o So far we just had one cfq_group in cfq_data. To create space for more than
  one cfq_group, we need to have a service tree of groups where all the groups
  can be queued if they have active cfq queues backlogged in these.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal f04a642463 blkio: Keep queue on service tree until we expire it
o Currently cfqq deletes a queue from service tree if it is empty (even if
  we might idle on the queue). This patch keeps the queue on service tree
  hence associated group remains on the service tree until we decide that
  we are not going to idle on the queue and expire it.

o This just helps in time accounting for queue/group and in implementation
  of rest of the patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal 615f0259e6 blkio: Implement macro to traverse each service tree in group
o Implement a macro to traverse each service tree in the group. This avoids
  usage of double for loop and special condition for idle tree 4 times.

o Macro is little twisted because of special handling of idle class service
  tree.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal cdb16e8f73 blkio: Introduce the notion of cfq groups
o This patch introduce the notion of cfq groups. Soon we will can have multiple
  groups of different weights in the system.

o Various service trees (prioclass and workload type trees), will become per
  cfq group. So hierarchy looks as follows.

			cfq_groups
			   |
			workload type
			   |
		        cfq queue

o When an scheduling decision has to be taken, first we select the cfq group
  then workload with-in the group and then cfq queue with-in the workload
  type.

o This patch just makes various workload service tree per cfq group and
  introduce the function to be able to choose a group for scheduling.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Vivek Goyal bf79193710 blkio: Set must_dispatch only if we decided to not dispatch the request
o must_dispatch flag should be set only if we decided not to run the queue
  and dispatch the request.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 19:28:51 +01:00
Shaohua Li 474b18ccc2 cfq-iosched: no dispatch limit for single queue
Since commit 2f5cb7381b, each queue can send
up to 4 * 4 requests if only one queue exists. I wonder why we have such limit.
Device supports tag can send more requests. For example, AHCI can send 31
requests. Test (direct aio randread) shows the limits reduce about 4% disk
thoughput.
On the other hand, since we send one request one time, if other queue
pop when current is sending more than cfq_quantum requests, current queue will
stop send requests soon after one request, so sounds there is no big latency.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 12:58:05 +01:00
Martin K. Petersen 98262f2762 block: Allow devices to indicate whether discarded blocks are zeroed
The discard ioctl is used by mkfs utilities to clear a block device
prior to putting metadata down.  However, not all devices return zeroed
blocks after a discard.  Some drives return stale data, potentially
containing old superblocks.  It is therefore important to know whether
discarded blocks are properly zeroed.

Both ATA and SCSI drives have configuration bits that indicate whether
zeroes are returned after a discard operation.  Implement a block level
interface that allows this information to be bubbled up the stack and
queried via a new block device ioctl.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 09:24:48 +01:00
Jens Axboe 464191c65b Revert "cfq: Make use of service count to estimate the rb_key offset"
This reverts commit 3586e917f2.

Corrado Zoccolo <czoccolo@gmail.com> correctly points out, that we need
consistency of rb_key offset across groups. This means we cannot properly
use the per-service_tree service count. Revert this change.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-30 09:38:13 +01:00
Corrado Zoccolo 8e550632cc cfq-iosched: fix corner cases in idling logic
Idling logic was disabled in some corner cases, leading to unfair share
 for noidle queues.
 * the idle timer was not armed if there were other requests in the
   driver. unfortunately, those requests could come from other workloads,
   or queues for which we don't enable idling. So we will check only
   pending requests from the active queue
 * rq_noidle check on no-idle queue could disable the end of tree idle if
   the last completed request was rq_noidle. Now, we will disable that
   idle only if all the queues served in the no-idle tree had rq_noidle
   requests.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo 76280aff1c cfq-iosched: idling on deep seeky sync queues
Seeky sync queues with large depth can gain unfairly big share of disk
 time, at the expense of other seeky queues. This patch ensures that
 idling will be enabled for queues with I/O depth at least 4, and small
 think time. The decision to enable idling is sticky, until an idle
 window times out without seeing a new request.

The reasoning behind the decision is that, if an application is using
large I/O depth, it is already optimized to make full utilization of
the hardware, and therefore we reserve a slice of exclusive use for it.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e4a229196a cfq-iosched: fix no-idle preemption logic
An incoming no-idle queue should preempt the active no-idle queue
 only if the active queue is idling due to service tree empty.
 Previous code was buggy in two ways:
 * it relied on service_tree field to be set on the active queue, while
   it is not set when the code is idling for a new request
 * it didn't check for the service tree empty condition, so could lead to
   LIFO behaviour if multiple queues with depth > 1 were preempting each
   other on an non-NCQ device.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:39:31 +01:00
Corrado Zoccolo e459dd08f4 cfq-iosched: fix ncq detection code
CFQ's detection of queueing devices initially assumes a queuing device
and detects if the queue depth reaches a certain threshold.
However, it will reconsider this choice periodically.

Unfortunately, if device is considered not queuing, CFQ will force a
unit queue depth for some workloads, thus defeating the detection logic.
This leads to poor performance on queuing hardware,
since the idle window remains enabled.

Given this premise, switching to hw_tag = 0 after we have proved at
least once that the device is NCQ capable is not a good choice.

The new detection code starts in an indeterminate state, in which CFQ behaves
as if hw_tag = 1, and then, if for a long observation period we never saw
large depth, we switch to hw_tag = 0, otherwise we stick to hw_tag = 1,
without reconsidering it again.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 10:02:57 +01:00
Corrado Zoccolo c16632bab1 cfq-iosched: cleanup unreachable code
cfq_should_idle returns false for no-idle queues that are not the last,
so the control flow will never reach the removed code in a state that
satisfies the if condition.
The unreachable code was added to emulate previous cfq behaviour for
non-NCQ rotational devices. My tests show that even without it, the
performances and fairness are comparable with previous cfq, thanks to
the fact that all seeky queues are grouped together, and that we idle at
the end of the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:46:46 +01:00
Ilya Loginov 2d4dc890b5 block: add helpers to run flush_dcache_page() against a bio and a request's pages
Mtdblock driver doesn't call flush_dcache_page for pages in request.  So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases.  The patch fixes this.

The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op.  Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.

See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.

Signed-off-by: Ilya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:16:19 +01:00
Gui Jianfeng 3586e917f2 cfq: Make use of service count to estimate the rb_key offset
For the moment, different workload cfq queues are put into different
service trees. But CFQ still uses "busy_queues" to estimate rb_key
offset when inserting a cfq queue into a service tree. I think this
isn't appropriate, and it should make use of service tree count to do
this estimation. This patch is for for-2.6.33 branch.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:14:11 +01:00
Randy Dunlap ad5ebd2fa2 block: jiffies fixes
Use HZ-independent calculation of milliseconds.
Add jiffies.h where it was missing since functions or macros
from it are used.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-11 13:47:45 +01:00
Martin K. Petersen 86b3728141 block: Expose discard granularity
While SSDs track block usage on a per-sector basis, RAID arrays often
have allocation blocks that are bigger.  Allow the discard granularity
and alignment to be set and teach the topology stacking logic how to
handle them.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-10 11:50:21 +01:00
Corrado Zoccolo cf7c25cf91 cfq-iosched: fix next_rq computation
Cfq has a bug in computation of next_rq, that affects transition
between multiple sequential request streams in a single queue
(e.g.: two sequential buffered writers of the same priority),
causing the alternation between the two streams for a transient period.

  8,0    1    18737     0.260400660  5312  D   W 141653311 + 256
  8,0    1    20839     0.273239461  5400  D   W 141653567 + 256
  8,0    1    20841     0.276343885  5394  D   W 142803919 + 256
  8,0    1    20843     0.279490878  5394  D   W 141668927 + 256
  8,0    1    20845     0.292459993  5400  D   W 142804175 + 256
  8,0    1    20847     0.295537247  5400  D   W 141668671 + 256
  8,0    1    20849     0.298656337  5400  D   W 142804431 + 256
  8,0    1    20851     0.311481148  5394  D   W 141668415 + 256
  8,0    1    20853     0.314421305  5394  D   W 142804687 + 256
  8,0    1    20855     0.318960112  5400  D   W 142804943 + 256

The fix makes sure that the next_rq is computed from the last
dispatched request, and not affected by merging.

  8,0    1    37776     4.305161306     0  D   W 141738087 + 256
  8,0    1    37778     4.308298091     0  D   W 141738343 + 256
  8,0    1    37780     4.312885190     0  D   W 141738599 + 256
  8,0    1    37782     4.315933291     0  D   W 141738855 + 256
  8,0    1    37784     4.319064459     0  D   W 141739111 + 256
  8,0    1    37786     4.331918431  5672  D   W 142803007 + 256
  8,0    1    37788     4.334930332  5672  D   W 142803263 + 256
  8,0    1    37790     4.337902723  5672  D   W 142803519 + 256
  8,0    1    37792     4.342359774  5672  D   W 142803775 + 256
  8,0    1    37794     4.345318286     0  D   W 142804031 + 256

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-08 17:16:46 +01:00
H Hartley Sweeten 476d42f138 block/scsi_ioctl.c: quiet sparse noise
Quiet sparse noise about symbol's not being declared.

Symbol blk_default_cmd_filter is only used locally and should be static.

The function blk_scsi_ioctl_init() is a fs_initcall and should also be
static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 09:10:33 +01:00
Jens Axboe e00ef79971 cfq-iosched: get rid of the coop_preempt flag
We need to rework this logic post the cooperating cfq_queue merging,
for now just get rid of it and Jeff Moyer will fix the fall out.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 08:54:55 +01:00
Jens Axboe 125c4f221a cfq-iosched: fix merge error
We ended up with testing the same condition twice, pretty
pointless. Remove that first if.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:25:45 +01:00
Jens Axboe 2058297d2d Merge branch 'for-linus' into for-2.6.33
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:14:39 +01:00
Jens Axboe 150e6c67f4 Merge branch 'cfq-2.6.33' into for-2.6.33 2009-11-03 21:12:10 +01:00
Shaohua Li 4b27e1bb44 cfq-iosched: limit coop preemption
CFQ has an optimization for cooperated applications. if several
io-context have close requests, they will get boost. But the
optimization get abused. Considering thread a, b, which work on one
file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s
+5, ... Both a and b are sequential read, so they can open idle window.
a reads a sector s and goes to idle window and wakeup b. b reads sector
s+1, since in current implementation, cfq_should_preempt() thinks a and
b are cooperators, b will preempt a. b then reads sector s+1 and goes to
idle window and wakeup a. for the same reason, a will preempt b and
reads s+2. a and b will continue the circle. The circle will be very
long, and a and b will occupy whole disk queue. Other applications will
nearly have no chance to run.

Fix this limiting coop preempt until a queue is scheduled normally
again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:25:02 +01:00
Jens Axboe e6ec4fe245 cfq-iosched: fix bad return value cfq_should_preempt()
Commit a6151c3a5c inadvertently reversed
a preempt condition check, potentially causing a performance regression.
Make the meta check correct again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 20:21:35 +01:00
Corrado Zoccolo dddb74519a cfq-iosched: simplify prio-unboost code
Eliminate redundant checks.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-02 10:40:37 +01:00
Jens Axboe 5869619cb5 cfq-iosched: fix style issue in cfq_get_avg_queues()
Line breaks and bad brace placement.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:27:07 +01:00
Corrado Zoccolo 718eee0579 cfq-iosched: fairness for sync no-idle queues
Currently no-idle queues in cfq are not serviced fairly:
even if they can only dispatch a small number of requests at a time,
they have to compete with idling queues to be serviced, experiencing
large latencies.

We should notice, instead, that no-idle queues are the ones that would
benefit most from having low latency, in fact they are any of:
* processes with large think times (e.g. interactive ones like file
  managers)
* seeky (e.g. programs faulting in their code at startup)
* or marked as no-idle from upper levels, to improve latencies of those
  requests.

This patch improves the fairness and latency for those queues, by:
* separating sync idle, sync no-idle and async queues in separate
  service_trees, for each priority
* service all no-idle queues together
* and idling when the last no-idle queue has been serviced, to
  anticipate for more no-idle work
* the timeslices allotted for idle and no-idle service_trees are
  computed proportionally to the number of processes in each set.

Servicing all no-idle queues together should have a performance boost
for NCQ-capable drives, without compromising fairness.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo a6d44e982d cfq-iosched: enable idling for last queue on priority class
cfq can disable idling for queues in various circumstances.
When workloads of different priorities are competing, if the higher
priority queue has idling disabled, lower priority queues may steal
its disk share. For example, in a scenario with an RT process
performing seeky reads vs a BE process performing sequential reads,
on an NCQ enabled hardware, with low_latency unset,
the RT process will dispatch only the few pending requests every full
slice of service for the BE process.

The patch solves this issue by always performing idle on the last
queue at a given priority class > idle. If the same process, or one
that can pre-empt it (so at the same priority or higher), submits a
new request within the idle window, the lower priority queue won't
dispatch, saving the disk bandwidth for higher priority ones.

Note: this doesn't touch the non_rotational + NCQ case (no hardware
to test if this is a benefit in that case).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo c0324a020e cfq-iosched: reimplement priorities using different service trees
We use different service trees for different priority classes.
This allows a simplification in the service tree insertion code, that no
longer has to consider priority while walking the tree.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo aa6f6a3de1 cfq-iosched: preparation to handle multiple service trees
We embed a pointer to the service tree in each queue, to handle multiple
service trees easily.
Service trees are enriched with a counter.
cfq_add_rq_rb is invoked after putting the rq in the fifo, to ensure
that all fields in rq are properly initialized.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Corrado Zoccolo 5db5d64277 cfq-iosched: adapt slice to number of processes doing I/O
When the number of processes performing I/O concurrently increases,
a fixed time slice per process will cause large latencies.

This patch, if low_latency mode is enabled,  will scale the time slice
assigned to each process according to a 300ms target latency.

In order to keep fairness among processes:
* The number of active processes is computed using a special form of
running average, that quickly follows sudden increases (to keep latency low),
and decrease slowly (to have fairness in spite of rapid decreases of this
value).

To safeguard sequential bandwidth, we impose a minimum time slice
(computed using 2*cfq_slice_idle as base, adjusted according to priority
and async-ness).

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:23:26 +01:00
Shaohua Li 1a1238a7dd cfq-iosched: improve hw_tag detection
If active queue hasn't enough requests and idle window opens, cfq will not
dispatch sufficient requests to hardware. In such situation, current code
will zero hw_tag. But this is because cfq doesn't dispatch enough requests
instead of hardware queue doesn't work. Don't zero hw_tag in such case.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-27 08:46:23 +01:00
Jeff Moyer e6c5bc737a cfq: break apart merged cfqqs if they stop cooperating
cfq_queues are merged if they are issuing requests within the mean seek
distance of one another.  This patch detects when the coopearting stops and
breaks the queues back up.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer b3b6d0408c cfq: change the meaning of the cfqq_coop flag
The flag used to indicate that a cfqq was allowed to jump ahead in the
scheduling order due to submitting a request close to the queue that
just executed.  Since closely cooperating queues are now merged, the flag
holds little meaning.  Change it to indicate that multiple queues were
merged.  This will later be used to allow the breaking up of merged queues
when they are no longer cooperating.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer df5fe3e8e1 cfq: merge cooperating cfq_queues
When cooperating cfq_queues are detected currently, they are allowed to
skip ahead in the scheduling order.  It is much more efficient to
automatically share the cfq_queue data structure between cooperating processes.
Performance of the read-test2 benchmark (which is written to emulate the
dump(8) utility) went from 12MB/s to 90MB/s on my SATA disk.  NFS servers
with multiple nfsd threads also saw performance increases.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:47 +01:00
Jeff Moyer b2c18e1e08 cfq: calculate the seek_mean per cfq_queue not per cfq_io_context
async cfq_queue's are already shared between processes within the same
priority, and forthcoming patches will change the mapping of cic to sync
cfq_queue from 1:1 to 1:N.  So, calculate the seekiness of a process
based on the cfq_queue instead of the cfq_io_context.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26 14:34:46 +01:00
Mark McLoughlin 6cafb12dc8 block: silently error unsupported empty barriers too
With 2.6.32-rc5 in a KVM guest using dm and virtio_blk, we see the
following errors:

  end_request: I/O error, dev vda, sector 0
  end_request: I/O error, dev vda, sector 0

The errors go away if dm stops submitting empty barriers, by reverting:

  commit 52b1fd5a27
  Author: Mikulas Patocka <mpatocka@redhat.com>
    dm: send empty barriers to targets in dm_flush

We should silently error all barriers, even empty barriers, on devices
like virtio_blk which don't support them.

See also:

  https://bugzilla.redhat.com/514901

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-24 14:14:31 +02:00
Jens Axboe c30f33437c Merge branch 'for-linus' into for-2.6.33 2009-10-13 12:29:45 +02:00
Randy Dunlap c7ebf0657b blk-settings: fix function parameter kernel-doc notation
Fix kernel-doc notation in blk-settings.c::blk_queue_max_discard_sectors().

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-12 08:20:47 +02:00
KOSAKI Motohiro 8c27959858 elv_iosched_store(): fix strstrip() misuse
elv_iosched_store() ignore the return value of strstrip().  It makes small
inconsistent behavior.

This patch fixes it.

 <before>
 ====================================
 # cd /sys/block/{blockdev}/queue

 case1:
 # echo "anticipatory" > scheduler
 # cat scheduler
 noop [anticipatory] deadline cfq

 case2:
 # echo "anticipatory " > scheduler
 # cat scheduler
 noop [anticipatory] deadline cfq

 case3:
 # echo " anticipatory" > scheduler
 bash: echo: write error: Invalid argument

 <after>
 ====================================
 # cd /sys/block/{blockdev}/queue

 case1:
 # echo "anticipatory" > scheduler
 # cat scheduler
 noop [anticipatory] deadline cfq

 case2:
 # echo "anticipatory " > scheduler
 # cat scheduler
 noop [anticipatory] deadline cfq

 case3:
 # echo " anticipatory" > scheduler
 noop [anticipatory] deadline cfq

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-09 08:48:08 +02:00
Corrado Zoccolo 355b659c87 cfq-iosched: avoid probable slice overrun when idling
If the average think time is larger than the remaining time slice
for any given queue, don't allow it to idle. A succesful idle also
means that we need to dispatch and complete a request, so if we don't
even have time left for the idle process, we would overrun the slice
in any case.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-08 08:43:32 +02:00
Jens Axboe a6151c3a5c cfq-iosched: apply bool value where we return 0/1
Saves 16 bytes of text, woohoo. But the more important point is
that it makes the code more readable when returning bool for 0/1
cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07 20:02:57 +02:00
Corrado Zoccolo ec60e4f674 cfq-iosched: fix think time allowed for seekers
CFQ enables idle only for processes that think less than the allowed
idle time. Since idle time is lower for seeky queues, we should use the
correct value in the comparison.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07 19:51:54 +02:00
Jens Axboe b9c8946b19 cfq-iosched: fix the slice residual sign
We should subtract the slice residual from the rb tree key, since
a negative residual count indicates that the cfqq overran its slice
the last time. Hence we want to add the overrun time, to position
it a bit further away in the service tree.

Reported-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 21:09:32 +02:00
Jens Axboe 0b182d617e cfq-iosched: abstract out the 'may this cfqq dispatch' logic
Makes the whole thing easier to read, cfq_dispatch_requests() was
a bit messy before.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:49:37 +02:00
Jens Axboe 1b59dd511b block: use proper BLK_RW_ASYNC in blk_queue_start_tag()
Makes it easier to read than the 0.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:19:02 +02:00
Nikanth Karthikesan 316d315bff block: Seperate read and write statistics of in_flight requests v2
Commit a9327cac44 added seperate read
and write statistics of in_flight requests. And exported the number
of read and write requests in progress seperately through sysfs.

But  Corrado Zoccolo <czoccolo@gmail.com> reported getting strange
output from "iostat -kx 2". Global values for service time and
utilization were garbage. For interval values, utilization was always
100%, and service time is higher than normal.

So this was reverted by commit 0f78ab9899

The problem was in part_round_stats_single(), I missed the following:
        if (now == part->stamp)
                return;

-       if (part->in_flight) {
+       if (part_in_flight(part)) {
                __part_stat_add(cpu, part, time_in_queue,
                                part_in_flight(part) * (now - part->stamp));
                __part_stat_add(cpu, part, io_ticks, (now - part->stamp));

With this chunk included, the reported regression gets fixed.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>

--
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:16:55 +02:00
Jens Axboe 23e018a1b0 block: get rid of kblock_schedule_delayed_work()
It was briefly introduced to allow CFQ to to delayed scheduling,
but we ended up removing that feature again. So lets kill the
function and export, and just switch CFQ back to the normal work
schedule since it is now passing in a '0' delay from all call
sites.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:58 +02:00
Corrado Zoccolo 48e025e63a cfq-iosched: fix possible problem with jiffies wraparound
The RR service tree is indexed by a key that is relative to current jiffies.
This can cause problems on jiffies wraparound.

The patch fixes it using time_before comparison, and changing
the add_front path to use a relative number, too.

Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:55 +02:00
Jens Axboe 30996f40bf cfq-iosched: fix issue with rq-rq merging and fifo list ordering
cfq uses rq->start_time as the fifo indicator, but that field may
get modified prior to cfq doing it's fifo list adjustment when
a request gets merged with another request. This can cause the
fifo list to become unordered.

Reported-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 11:03:39 +02:00
Jens Axboe 5d13379a4d Merge branch 'master' into for-2.6.33 2009-10-05 09:30:10 +02:00
Jens Axboe 0f78ab9899 Revert "Seperate read and write statistics of in_flight requests"
This reverts commit a9327cac44.

Corrado Zoccolo <czoccolo@gmail.com> reports:

"with 2.6.32-rc1 I started getting the following strange output from
"iostat -kx 2":
Linux 2.6.31bisect (et2) 	04/10/2009 	_i686_	(2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          10,70    0,00    3,16   15,75    0,00   70,38

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda              18,22     0,00    0,67    0,01    14,77     0,02
43,94     0,01   10,53 39043915,03 2629219,87
sdb              60,89     9,68   50,79    3,04  1724,43    50,52
65,95     0,70   13,06 488437,47 2629219,87

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           2,72    0,00    0,74    0,00    0,00   96,53

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           6,68    0,00    0,99    0,00    0,00   92,33

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           4,40    0,00    0,73    1,47    0,00   93,40

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     4,00    0,00    3,00     0,00    28,00
18,67     0,06   19,50 333,33 100,00

Global values for service time and utilization are garbage. For
interval values, utilization is always 100%, and service time is
higher than normal.

I bisected it down to:
[a9327cac44] Seperate read and write
statistics of in_flight requests
and verified that reverting just that commit indeed solves the issue
on 2.6.32-rc1."

So until this is debugged, revert the bad commit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04 21:04:38 +02:00
Jens Axboe e00c54c36a cfq-iosched: don't delay async queue if it hasn't dispatched at all
We cannot delay for the first dispatch of the async queue if it
hasn't dispatched at all, since that could present a local user
DoS attack vector using an app that just did slow timed sync reads
while filling memory.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04 20:36:19 +02:00
Martin K. Petersen ac481c20ef block: Topology ioctls
Not all users of the topology information want to use libblkid.  Provide
the topology information through bdev ioctls.

Also clarify sector size comments for existing BLK ioctls.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 20:52:01 +02:00
Jens Axboe 61f0c1dcaa cfq-iosched: use assigned slice sync value, not default
We should use the sysfs modified slice sync value, in case it differs
from the default.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 19:46:03 +02:00
Jens Axboe 963b72fc66 cfq-iosched: rename 'desktop' sysfs entry to 'low_latency'
Don't think that's necessarily a perfect description of what this
option fiddles with, but it's probably better than 'desktop'.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 19:42:18 +02:00