hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt 

From Kukjin Kim <kgene.kim@samsung.com>:

It is for supporting spi dt for exynos4210 and exynos5250, and got the
ack from Grant Likely for spi driver.

Note: Since this is including spi driver changes, so it was made based
on next/devel-dma-ops which touches same file, Samsung spi driver for
avoiding bad conflicts.

* 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5
  ARM: EXYNOS: Add spi clock support for EXYNOS5
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4
  ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock
  ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controller
  spi: s3c64xx: add device tree support
  spi: s3c64xx: Remove the 'set_level' callback from controller data
  ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata function
  ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functions
  spi: s3c64xx: move controller information into driver data
  spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro
  ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookup

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2012-07-17 23:06:32 +02:00
parent 6a1d02d861 79989ba3e2
commit feb7b8d6d2
31 changed files with 956 additions and 329 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

113
Documentation/devicetree/bindings/spi/spi-samsung.txt Normal file
View File

@ -0,0 +1,113 @@
* Samsung SPI Controller
The Samsung SPI controller is used to interface with various devices such as flash
and display controllers using the SPI communication interface.
Required SoC Specific Properties:
- compatible: should be one of the following.
- samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- samsung,s3c6410-spi: for s3c6410 platforms
- samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
- samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- samsung,exynos4210-spi: for exynos4 and exynos5 platforms
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
- tx-dma-channel: The dma channel specifier for tx operations. The format of
the dma specifier depends on the dma controller.
- rx-dma-channel: The dma channel specifier for rx operations. The format of
the dma specifier depends on the dma controller.
Required Board Specific Properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
order specified). The format of the gpio specifier depends on the gpio
controller.
Optional Board Specific Properties:
- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
select the clock source for the spi bus clock, this property can be used to
indicate the clock to be used for driving the spi bus clock. If not specified,
the clock number 0 is used as default.
- num-cs: Specifies the number of chip select lines supported. If
not specified, the default number of chip select lines is set to 1.
SPI Controller specific data in SPI slave nodes:
- The spi slave nodes should provide the following information which is required
by the spi controller.
- cs-gpio: A gpio specifier that specifies the gpio line used as
the slave select line by the spi controller. The format of the gpio
specifier depends on the gpio controller.
- samsung,spi-feedback-delay: The sampling phase shift to be applied on the
miso line (to account for any lag in the miso line). The following are the
valid values.
- 0: No phase shift.
- 1: 90 degree phase shift sampling.
- 2: 180 degree phase shift sampling.
- 3: 270 degree phase shift sampling.
Aliases:
- All the SPI controller nodes should be represented in the aliases node using
the following format 'spi{n}' where n is a unique number for the alias.
Example:
- SoC Specific Portion:
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 5>;
rx-dma-channel = <&pdma0 4>;
};
- Board Specific Portion:
spi_0: spi@12d20000 {
#address-cells = <1>;
#size-cells = <0>;
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <10000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};

12
arch/arm/boot/dts/exynos4210-origen.dts
View File

@ -134,4 +134,16 @@
i2c@138D0000 {
status = "disabled";
};
spi_0: spi@13920000 {
status = "disabled";
};
spi_1: spi@13930000 {
status = "disabled";
};
spi_2: spi@13940000 {
status = "disabled";
};
};

38
arch/arm/boot/dts/exynos4210-smdkv310.dts
View File

@ -179,4 +179,42 @@
i2c@138D0000 {
status = "disabled";
};
spi_0: spi@13920000 {
status = "disabled";
};
spi_1: spi@13930000 {
status = "disabled";
};
spi_2: spi@13940000 {
gpios = <&gpc1 1 5 3 0>,
<&gpc1 3 5 3 0>,
<&gpc1 4 5 3 0>;
w25x80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpc1 2 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
};

47
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -25,6 +25,12 @@
compatible = "samsung,exynos4210";
interrupt-parent = <&gic>;
aliases {
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
};
gic:interrupt-controller@10490000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@ -33,6 +39,17 @@
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
combiner:interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
@ -147,6 +164,36 @@
interrupts = <0 65 0>;
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 7>;
rx-dma-channel = <&pdma0 6>;
#address-cells = <1>;
#size-cells = <0>;
};
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
interrupts = <0 67 0>;
tx-dma-channel = <&pdma1 7>;
rx-dma-channel = <&pdma1 6>;
#address-cells = <1>;
#size-cells = <0>;
};
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
interrupts = <0 68 0>;
tx-dma-channel = <&pdma0 9>;
rx-dma-channel = <&pdma0 8>;
#address-cells = <1>;
#size-cells = <0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;

38
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -71,4 +71,42 @@
i2c@12CD0000 {
status = "disabled";
};
spi_0: spi@12d20000 {
status = "disabled";
};
spi_1: spi@12d30000 {
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
spi_2: spi@12d40000 {
status = "disabled";
};
};

36
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -23,6 +23,12 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
aliases {
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
};
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@ -146,6 +152,36 @@
#size-cells = <0>;
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 5>;
rx-dma-channel = <&pdma0 4>;
#address-cells = <1>;
#size-cells = <0>;
};
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
tx-dma-channel = <&pdma1 5>;
rx-dma-channel = <&pdma1 4>;
#address-cells = <1>;
#size-cells = <0>;
};
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
tx-dma-channel = <&pdma0 7>;
rx-dma-channel = <&pdma0 6>;
#address-cells = <1>;
#size-cells = <0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;

73
arch/arm/mach-exynos/clock-exynos4.c
View File

@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = {
.ctrlbit = (1 << 13),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "exynos4210-spi.0",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "exynos4210-spi.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "exynos4210-spi.2",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 18),
}, {
@ -1242,42 +1242,69 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi0 = {
static struct clksrc_clk exynos4_clk_mdout_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 16),
.name = "mdout_spi",
.devname = "exynos4210-spi.0",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi1 = {
static struct clksrc_clk exynos4_clk_mdout_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 20),
.name = "mdout_spi",
.devname = "exynos4210-spi.1",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi2 = {
static struct clksrc_clk exynos4_clk_mdout_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.2",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 24),
.name = "mdout_spi",
.devname = "exynos4210-spi.2",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.0",
.parent = &exynos4_clk_mdout_spi0.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.1",
.parent = &exynos4_clk_mdout_spi1.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 20),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.2",
.parent = &exynos4_clk_mdout_spi2.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 24),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
};
/* Clock initialization code */
static struct clksrc_clk *exynos4_sysclks[] = {
&exynos4_clk_mout_apll,
@ -1331,7 +1358,9 @@ static struct clksrc_clk *exynos4_clksrc_cdev[] = {
&exynos4_clk_sclk_spi0,
&exynos4_clk_sclk_spi1,
&exynos4_clk_sclk_spi2,
&exynos4_clk_mdout_spi0,
&exynos4_clk_mdout_spi1,
&exynos4_clk_mdout_spi2,
};
static struct clk_lookup exynos4_clk_lookup[] = {
@ -1347,9 +1376,9 @@ static struct clk_lookup exynos4_clk_lookup[] = {
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
};
static int xtal_rate;

95
arch/arm/mach-exynos/clock-exynos5.c
View File

@ -131,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
}
static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
@ -740,6 +745,24 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
}, {
.name = "spi",
.devname = "exynos4210-spi.0",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "spi",
.devname = "exynos4210-spi.1",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "exynos4210-spi.2",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 18),
}, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
@ -1034,6 +1057,69 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos5_clk_mdout_spi0 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.0",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos5_clk_mdout_spi1 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.1",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
};
static struct clksrc_clk exynos5_clk_mdout_spi2 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.2",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos5_clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.0",
.parent = &exynos5_clk_mdout_spi0.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos5_clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.1",
.parent = &exynos5_clk_mdout_spi1.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 20),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos5_clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.2",
.parent = &exynos5_clk_mdout_spi2.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 24),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos5_clksrcs[] = {
{
.clk = {
@ -1148,6 +1234,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_dout_mmc4,
&exynos5_clk_aclk_acp,
&exynos5_clk_pclk_acp,
&exynos5_clk_sclk_spi0,
&exynos5_clk_sclk_spi1,
&exynos5_clk_sclk_spi2,
&exynos5_clk_mdout_spi0,
&exynos5_clk_mdout_spi1,
&exynos5_clk_mdout_spi2,
};
static struct clk *exynos5_clk_cdev[] = {
@ -1176,6 +1268,9 @@ static struct clk_lookup exynos5_clk_lookup[] = {
CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

4
arch/arm/mach-exynos/include/mach/irqs.h
View File

@ -195,6 +195,10 @@
#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
#define IRQ_SPI0 EXYNOS4_IRQ_SPI0
#define IRQ_SPI1 EXYNOS4_IRQ_SPI1
#define IRQ_SPI2 EXYNOS4_IRQ_SPI2
#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG

3
arch/arm/mach-exynos/include/mach/map.h
View File

@ -154,6 +154,9 @@
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
#define EXYNOS5_PA_SPI0 0x12D20000
#define EXYNOS5_PA_SPI1 0x12D30000
#define EXYNOS5_PA_SPI2 0x12D40000
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000

6
arch/arm/mach-exynos/mach-exynos4-dt.c
View File

@ -55,6 +55,12 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
"exynos4-sdhci.3", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
"exynos4210-spi.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
{},

6
arch/arm/mach-exynos/mach-exynos5-dt.c
View File

@ -47,6 +47,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
"exynos4210-spi.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),

33
arch/arm/mach-exynos/setup-spi.c
View File

@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
@ -34,15 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
@ -53,15 +34,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);

3
arch/arm/mach-s3c24xx/clock-s3c2416.c
View File

@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
};
void __init s3c2416_init_clocks(int xtal)

2
arch/arm/mach-s3c24xx/clock-s3c2443.c
View File

@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = {
static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
};
void __init s3c2443_init_clocks(int xtal)

4
arch/arm/mach-s3c24xx/common-s3c2443.c
View File

@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = {
static struct clk hsspi_clk = {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s3c2443-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_HSSPI,
@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,

10
arch/arm/mach-s3c24xx/setup-spi.c
View File

@ -13,20 +13,12 @@
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
.high_speed = 1,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
int s3c64xx_spi0_cfg_gpio(void)
{
/* enable hsspi bit in misccr */
s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);

20
arch/arm/mach-s3c64xx/clock.c
View File

@ -178,13 +178,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI0,
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI1,
@ -331,7 +331,7 @@ static struct clk init_clocks_off[] = {
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
@ -339,7 +339,7 @@ static struct clk clk_48m_spi0 = {
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
@ -802,7 +802,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "spi-bus",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
},
@ -814,7 +814,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "spi-bus",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
},
@ -858,10 +858,10 @@ static struct clk_lookup s3c64xx_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)

1
arch/arm/mach-s3c64xx/include/mach/dma.h
View File

@ -21,6 +21,7 @@
*/
enum dma_ch {
/* DMA0/SDMA0 */
DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,

2
arch/arm/mach-s3c64xx/mach-crag6410.c
View File

@ -799,7 +799,7 @@ static void __init crag6410_machine_init(void)
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
s3c64xx_spi0_set_platdata(NULL, 0, 1);
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));

19
arch/arm/mach-s3c64xx/setup-spi.c
View File

@ -9,19 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -30,13 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);

12
arch/arm/mach-s5p64x0/clock-s5p6440.c
View File

@ -227,13 +227,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@ -467,7 +467,7 @@ static struct clksrc_clk clk_sclk_uclk = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@ -479,7 +479,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@ -519,8 +519,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),

12
arch/arm/mach-s5p64x0/clock-s5p6450.c
View File

@ -236,13 +236,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@ -528,7 +528,7 @@ static struct clksrc_clk clk_sclk_uclk = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@ -540,7 +540,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@ -562,8 +562,8 @@ static struct clk_lookup s5p6450_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),

21
arch/arm/mach-s5p64x0/setup-spi.c
View File

@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
@ -36,13 +25,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,

30
arch/arm/mach-s5pc100/clock.c
View File

@ -564,19 +564,19 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 5),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 8),
@ -702,7 +702,7 @@ static struct clk clk_hsmmc0 = {
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 7),
@ -710,7 +710,7 @@ static struct clk clk_48m_spi0 = {
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 8),
@ -718,7 +718,7 @@ static struct clk clk_48m_spi1 = {
static struct clk clk_48m_spi2 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 9),
@ -1085,7 +1085,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.ctrlbit = (1 << 4),
.enable = s5pc100_sclk0_ctrl,
},
@ -1097,7 +1097,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.ctrlbit = (1 << 5),
.enable = s5pc100_sclk0_ctrl,
},
@ -1109,7 +1109,7 @@ static struct clksrc_clk clk_sclk_spi1 = {
static struct clksrc_clk clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
},
@ -1315,12 +1315,12 @@ static struct clk_lookup s5pc100_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
};
void __init s5pc100_register_clocks(void)

30
arch/arm/mach-s5pc100/setup-spi.c
View File

@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -31,14 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -47,14 +30,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);

14
arch/arm/mach-s5pv210/clock.c
View File

@ -445,19 +445,19 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 11),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pv210-spi.0",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<12),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pv210-spi.1",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<13),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pv210-spi.2",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<14),
@ -1035,7 +1035,7 @@ static struct clksrc_clk clk_sclk_mmc3 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pv210-spi.0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 16),
},
@ -1047,7 +1047,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pv210-spi.1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 17),
},
@ -1331,8 +1331,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
};
void __init s5pv210_register_clocks(void)

21
arch/arm/mach-s5pv210/setup-spi.c
View File

@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
@ -33,14 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);

60
arch/arm/plat-samsung/devs.c
View File

@ -1512,7 +1512,7 @@ static struct resource s3c64xx_spi0_resource[] = {
};
struct platform_device s3c64xx_device_spi0 = {
.name = "s3c64xx-spi",
.name = "s3c6410-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
.resource = s3c64xx_spi0_resource,
@ -1522,13 +1522,10 @@ struct platform_device s3c64xx_device_spi0 = {
},
};
void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
struct s3c64xx_spi_info pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
@ -1536,12 +1533,11 @@ void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
if (!pd->cfg_gpio)
pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
}
#endif /* CONFIG_S3C64XX_DEV_SPI0 */
@ -1554,7 +1550,7 @@ static struct resource s3c64xx_spi1_resource[] = {
};
struct platform_device s3c64xx_device_spi1 = {
.name = "s3c64xx-spi",
.name = "s3c6410-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
.resource = s3c64xx_spi1_resource,
@ -1564,26 +1560,20 @@ struct platform_device s3c64xx_device_spi1 = {
},
};
void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
pr_err("%s: Invalid SPI configuration\n", __func__);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
if (!pd->cfg_gpio)
pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
}
#endif /* CONFIG_S3C64XX_DEV_SPI1 */
@ -1596,7 +1586,7 @@ static struct resource s3c64xx_spi2_resource[] = {
};
struct platform_device s3c64xx_device_spi2 = {
.name = "s3c64xx-spi",
.name = "s3c6410-spi",
.id = 2,
.num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
.resource = s3c64xx_spi2_resource,
@ -1606,13 +1596,10 @@ struct platform_device s3c64xx_device_spi2 = {
},
};
void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
struct s3c64xx_spi_info pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
@ -1620,11 +1607,10 @@ void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
if (!pd->cfg_gpio)
pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
}
#endif /* CONFIG_S3C64XX_DEV_SPI2 */

39
arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
View File

@ -18,7 +18,6 @@ struct platform_device;
* @fb_delay: Slave specific feedback delay.
* Refer to FB_CLK_SEL register definition in SPI chapter.
* @line: Custom 'identity' of the CS line.
* @set_level: CS line control.
*
* This is per SPI-Slave Chipselect information.
* Allocate and initialize one in machine init code and make the
@ -27,57 +26,41 @@ struct platform_device;
struct s3c64xx_spi_csinfo {
u8 fb_delay;
unsigned line;
void (*set_level)(unsigned line_id, int lvl);
};
/**
* struct s3c64xx_spi_info - SPI Controller defining structure
* @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
* @clk_from_cmu: If the SPI clock/prescalar control block is present
* by the platform's clock-management-unit and not in SPI controller.
* @num_cs: Number of CS this controller emulates.
* @cfg_gpio: Configure pins for this SPI controller.
* @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
* @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
* @high_speed: If the controller supports HIGH_SPEED_EN bit
* @tx_st_done: Depends on tx fifo_lvl field
*/
struct s3c64xx_spi_info {
int src_clk_nr;
bool clk_from_cmu;
int num_cs;
int (*cfg_gpio)(struct platform_device *pdev);
/* Following two fields are for future compatibility */
int fifo_lvl_mask;
int rx_lvl_offset;
int high_speed;
int tx_st_done;
int (*cfg_gpio)(void);
};
/**
* s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
* @pd: SPI platform data to set.
* @cfg_gpio: Pointer to gpio setup function.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs);
extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs);
extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs);
/* defined by architecture to configure gpio */
extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
extern int s3c64xx_spi0_cfg_gpio(void);
extern int s3c64xx_spi1_cfg_gpio(void);
extern int s3c64xx_spi2_cfg_gpio(void);
extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;

481
drivers/spi/spi-s3c64xx.c
View File

@ -27,10 +27,15 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <mach/dma.h>
#include <plat/s3c64xx-spi.h>
#define MAX_SPI_PORTS 3
/* Registers and bit-fields */
#define S3C64XX_SPI_CH_CFG 0x00
@ -113,13 +118,12 @@
#define S3C64XX_SPI_FBCLK_MSK (3<<0)
#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \
(((i)->fifo_lvl_mask + 1))) \
? 1 : 0)
#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0)
#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
#define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
(1 << (i)->port_conf->tx_st_done)) ? 1 : 0)
#define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
#define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
FIFO_LVL_MASK(i))
#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff
#define S3C64XX_SPI_TRAILCNT_OFF 19
@ -135,6 +139,29 @@ struct s3c64xx_spi_dma_data {
unsigned ch;
enum dma_data_direction direction;
enum dma_ch dmach;
struct property *dma_prop;
};
/**
* struct s3c64xx_spi_info - SPI Controller hardware info
* @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
* @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
* @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
* @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
* @clk_from_cmu: True, if the controller does not include a clock mux and
* prescaler unit.
*
* The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
* differ in some aspects such as the size of the fifo and spi bus clock
* setup. Such differences are specified to the driver using this structure
* which is provided as driver data to the driver.
*/
struct s3c64xx_spi_port_config {
int fifo_lvl_mask[MAX_SPI_PORTS];
int rx_lvl_offset;
int tx_st_done;
bool high_speed;
bool clk_from_cmu;
};
/**
@ -175,6 +202,9 @@ struct s3c64xx_spi_driver_data {
struct s3c64xx_spi_dma_data rx_dma;
struct s3c64xx_spi_dma_data tx_dma;
struct samsung_dma_ops *ops;
struct s3c64xx_spi_port_config *port_conf;
unsigned int port_id;
unsigned long gpios[4];
};
static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@ -183,7 +213,6 @@ static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long loops;
u32 val;
@ -199,7 +228,7 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
loops = msecs_to_loops(1);
do {
val = readl(regs + S3C64XX_SPI_STATUS);
} while (TX_FIFO_LVL(val, sci) && loops--);
} while (TX_FIFO_LVL(val, sdd) && loops--);
if (loops == 0)
dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
@ -208,7 +237,7 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
loops = msecs_to_loops(1);
do {
val = readl(regs + S3C64XX_SPI_STATUS);
if (RX_FIFO_LVL(val, sci))
if (RX_FIFO_LVL(val, sdd))
readl(regs + S3C64XX_SPI_RX_DATA);
else
break;
@ -301,7 +330,9 @@ static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
req.cap = DMA_SLAVE;
req.client = &s3c64xx_spi_dma_client;
req.dt_dmach_prop = sdd->rx_dma.dma_prop;
sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req);
req.dt_dmach_prop = sdd->tx_dma.dma_prop;
sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req);
return 1;
@ -311,7 +342,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
@ -361,7 +391,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
if (xfer->rx_buf != NULL) {
sdd->state |= RXBUSY;
if (sci->high_speed && sdd->cur_speed >= 30000000UL
if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL
&& !(sdd->cur_mode & SPI_CPHA))
chcfg |= S3C64XX_SPI_CH_HS_EN;
@ -388,20 +418,19 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
/* Deselect the last toggled device */
cs = sdd->tgl_spi->controller_data;
cs->set_level(cs->line,
spi->mode & SPI_CS_HIGH ? 0 : 1);
gpio_set_value(cs->line,
spi->mode & SPI_CS_HIGH ? 0 : 1);
}
sdd->tgl_spi = NULL;
}
cs = spi->controller_data;
cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
}
static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
unsigned long val;
int ms;
@ -418,7 +447,7 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
val = msecs_to_loops(ms);
do {
status = readl(regs + S3C64XX_SPI_STATUS);
} while (RX_FIFO_LVL(status, sci) < xfer->len && --val);
} while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
}
if (!val)
@ -437,8 +466,8 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
if (xfer->rx_buf == NULL) {
val = msecs_to_loops(10);
status = readl(regs + S3C64XX_SPI_STATUS);
while ((TX_FIFO_LVL(status, sci)
|| !S3C64XX_SPI_ST_TX_DONE(status, sci))
while ((TX_FIFO_LVL(status, sdd)
|| !S3C64XX_SPI_ST_TX_DONE(status, sdd))
&& --val) {
cpu_relax();
status = readl(regs + S3C64XX_SPI_STATUS);
@ -482,17 +511,16 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
if (sdd->tgl_spi == spi)
sdd->tgl_spi = NULL;
cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
}
static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 val;
/* Disable Clock */
if (sci->clk_from_cmu) {
if (sdd->port_conf->clk_from_cmu) {
clk_disable(sdd->src_clk);
} else {
val = readl(regs + S3C64XX_SPI_CLK_CFG);
@ -536,7 +564,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
writel(val, regs + S3C64XX_SPI_MODE_CFG);
if (sci->clk_from_cmu) {
if (sdd->port_conf->clk_from_cmu) {
/* Configure Clock */
/* There is half-multiplier before the SPI */
clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
@ -562,7 +590,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
struct spi_message *msg)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct device *dev = &sdd->pdev->dev;
struct spi_transfer *xfer;
@ -578,7 +605,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
/* Map until end or first fail */
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
continue;
if (xfer->tx_buf != NULL) {
@ -612,7 +639,6 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
struct spi_message *msg)
{
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct device *dev = &sdd->pdev->dev;
struct spi_transfer *xfer;
@ -621,7 +647,7 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
continue;
if (xfer->rx_buf != NULL
@ -640,7 +666,6 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
struct spi_device *spi = msg->spi;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
struct spi_transfer *xfer;
@ -695,7 +720,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
}
/* Polling method for xfers not bigger than FIFO capacity */
if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
use_dma = 0;
else
use_dma = 1;
@ -800,6 +825,48 @@ static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
return 0;
}
static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi)
{
struct s3c64xx_spi_csinfo *cs;
struct device_node *slave_np, *data_np;
u32 fb_delay = 0;
slave_np = spi->dev.of_node;
if (!slave_np) {
dev_err(&spi->dev, "device node not found\n");
return ERR_PTR(-EINVAL);
}
for_each_child_of_node(slave_np, data_np)
if (!strcmp(data_np->name, "controller-data"))
break;
if (!data_np) {
dev_err(&spi->dev, "child node 'controller-data' not found\n");
return ERR_PTR(-EINVAL);
}
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs) {
dev_err(&spi->dev, "could not allocate memory for controller"
" data\n");
return ERR_PTR(-ENOMEM);
}
cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
if (!gpio_is_valid(cs->line)) {
dev_err(&spi->dev, "chip select gpio is not specified or "
"invalid\n");
kfree(cs);
return ERR_PTR(-EINVAL);
}
of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay);
cs->fb_delay = fb_delay;
return cs;
}
/*
* Here we only check the validity of requested configuration
* and save the configuration in a local data-structure.
@ -813,14 +880,30 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
struct s3c64xx_spi_info *sci;
struct spi_message *msg;
unsigned long flags;
int err = 0;
int err;
if (cs == NULL || cs->set_level == NULL) {
sdd = spi_master_get_devdata(spi->master);
if (!cs && spi->dev.of_node) {
cs = s3c64xx_get_slave_ctrldata(sdd, spi);
spi->controller_data = cs;
}
if (IS_ERR_OR_NULL(cs)) {
dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
return -ENODEV;
}
sdd = spi_master_get_devdata(spi->master);
if (!spi_get_ctldata(spi)) {
err = gpio_request(cs->line, dev_name(&spi->dev));
if (err) {
dev_err(&spi->dev, "request for slave select gpio "
"line [%d] failed\n", cs->line);
err = -EBUSY;
goto err_gpio_req;
}
spi_set_ctldata(spi, cs);
}
sci = sdd->cntrlr_info;
spin_lock_irqsave(&sdd->lock, flags);
@ -831,7 +914,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
dev_err(&spi->dev,
"setup: attempt while mssg in queue!\n");
spin_unlock_irqrestore(&sdd->lock, flags);
return -EBUSY;
err = -EBUSY;
goto err_msgq;
}
}
@ -849,7 +933,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
pm_runtime_get_sync(&sdd->pdev->dev);
/* Check if we can provide the requested rate */
if (!sci->clk_from_cmu) {
if (!sdd->port_conf->clk_from_cmu) {
u32 psr, speed;
/* Max possible */
@ -874,22 +958,44 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
}
speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
if (spi->max_speed_hz >= speed)
if (spi->max_speed_hz >= speed) {
spi->max_speed_hz = speed;
else
} else {
err = -EINVAL;
goto setup_exit;
}
}
pm_runtime_put(&sdd->pdev->dev);
disable_cs(sdd, spi);
return 0;
setup_exit:
/* setup() returns with device de-selected */
disable_cs(sdd, spi);
err_msgq:
gpio_free(cs->line);
spi_set_ctldata(spi, NULL);
err_gpio_req:
kfree(cs);
return err;
}
static void s3c64xx_spi_cleanup(struct spi_device *spi)
{
struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
if (cs) {
gpio_free(cs->line);
if (spi->dev.of_node)
kfree(cs);
}
spi_set_ctldata(spi, NULL);
}
static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
{
struct s3c64xx_spi_driver_data *sdd = data;
@ -930,7 +1036,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
/* Disable Interrupts - we use Polling if not DMA mode */
writel(0, regs + S3C64XX_SPI_INT_EN);
if (!sci->clk_from_cmu)
if (!sdd->port_conf->clk_from_cmu)
writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
regs + S3C64XX_SPI_CLK_CFG);
writel(0, regs + S3C64XX_SPI_MODE_CFG);
@ -951,42 +1057,166 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
flush_fifo(sdd);
}
static int __devinit s3c64xx_spi_get_dmares(
struct s3c64xx_spi_driver_data *sdd, bool tx)
{
struct platform_device *pdev = sdd->pdev;
struct s3c64xx_spi_dma_data *dma_data;
struct property *prop;
struct resource *res;
char prop_name[15], *chan_str;
if (tx) {
dma_data = &sdd->tx_dma;
dma_data->direction = DMA_TO_DEVICE;
chan_str = "tx";
} else {
dma_data = &sdd->rx_dma;
dma_data->direction = DMA_FROM_DEVICE;
chan_str = "rx";
}
if (!sdd->pdev->dev.of_node) {
res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1);
if (!res) {
dev_err(&pdev->dev, "Unable to get SPI-%s dma "
"resource\n", chan_str);
return -ENXIO;
}
dma_data->dmach = res->start;
return 0;
}
sprintf(prop_name, "%s-dma-channel", chan_str);
prop = of_find_property(pdev->dev.of_node, prop_name, NULL);
if (!prop) {
dev_err(&pdev->dev, "%s dma channel property not specified\n",
chan_str);
return -ENXIO;
}
dma_data->dmach = DMACH_DT_PROP;
dma_data->dma_prop = prop;
return 0;
}
#ifdef CONFIG_OF
static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
{
struct device *dev = &sdd->pdev->dev;
int idx, gpio, ret;
/* find gpios for mosi, miso and clock lines */
for (idx = 0; idx < 3; idx++) {
gpio = of_get_gpio(dev->of_node, idx);
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
goto free_gpio;
}
ret = gpio_request(gpio, "spi-bus");
if (ret) {
dev_err(dev, "gpio [%d] request failed\n", gpio);
goto free_gpio;
}
}
return 0;
free_gpio:
while (--idx >= 0)
gpio_free(sdd->gpios[idx]);
return -EINVAL;
}
static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
{
unsigned int idx;
for (idx = 0; idx < 3; idx++)
gpio_free(sdd->gpios[idx]);
}
static struct __devinit s3c64xx_spi_info * s3c64xx_spi_parse_dt(
struct device *dev)
{
struct s3c64xx_spi_info *sci;
u32 temp;
sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL);
if (!sci) {
dev_err(dev, "memory allocation for spi_info failed\n");
return ERR_PTR(-ENOMEM);
}
if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
dev_warn(dev, "spi bus clock parent not specified, using "
"clock at index 0 as parent\n");
sci->src_clk_nr = 0;
} else {
sci->src_clk_nr = temp;
}
if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
dev_warn(dev, "number of chip select lines not specified, "
"assuming 1 chip select line\n");
sci->num_cs = 1;
} else {
sci->num_cs = temp;
}
return sci;
}
#else
static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
{
return dev->platform_data;
}
static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
{
return -EINVAL;
}
static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
{
}
#endif
static const struct of_device_id s3c64xx_spi_dt_match[];
static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
struct platform_device *pdev)
{
#ifdef CONFIG_OF
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(s3c64xx_spi_dt_match, pdev->dev.of_node);
return (struct s3c64xx_spi_port_config *)match->data;
}
#endif
return (struct s3c64xx_spi_port_config *)
platform_get_device_id(pdev)->driver_data;
}
static int __init s3c64xx_spi_probe(struct platform_device *pdev)
{
struct resource *mem_res, *dmatx_res, *dmarx_res;
struct resource *mem_res;
struct s3c64xx_spi_driver_data *sdd;
struct s3c64xx_spi_info *sci;
struct s3c64xx_spi_info *sci = pdev->dev.platform_data;
struct spi_master *master;
int ret, irq;
char clk_name[16];
if (pdev->id < 0) {
dev_err(&pdev->dev,
"Invalid platform device id-%d\n", pdev->id);
return -ENODEV;
if (!sci && pdev->dev.of_node) {
sci = s3c64xx_spi_parse_dt(&pdev->dev);
if (IS_ERR(sci))
return PTR_ERR(sci);
}
if (pdev->dev.platform_data == NULL) {
if (!sci) {
dev_err(&pdev->dev, "platform_data missing!\n");
return -ENODEV;
}
sci = pdev->dev.platform_data;
/* Check for availability of necessary resource */
dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (dmatx_res == NULL) {
dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n");
return -ENXIO;
}
dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (dmarx_res == NULL) {
dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n");
return -ENXIO;
}
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mem_res == NULL) {
dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
@ -1009,19 +1239,37 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
sdd = spi_master_get_devdata(master);
sdd->port_conf = s3c64xx_spi_get_port_config(pdev);
sdd->master = master;
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
sdd->tx_dma.dmach = dmatx_res->start;
sdd->tx_dma.direction = DMA_MEM_TO_DEV;
sdd->rx_dma.dmach = dmarx_res->start;
sdd->rx_dma.direction = DMA_DEV_TO_MEM;
if (pdev->dev.of_node) {
ret = of_alias_get_id(pdev->dev.of_node, "spi");
if (ret < 0) {
dev_err(&pdev->dev, "failed to get alias id, "
"errno %d\n", ret);
goto err0;
}
sdd->port_id = ret;
} else {
sdd->port_id = pdev->id;
}
sdd->cur_bpw = 8;
master->bus_num = pdev->id;
ret = s3c64xx_spi_get_dmares(sdd, true);
if (ret)
goto err0;
ret = s3c64xx_spi_get_dmares(sdd, false);
if (ret)
goto err0;
master->dev.of_node = pdev->dev.of_node;
master->bus_num = sdd->port_id;
master->setup = s3c64xx_spi_setup;
master->cleanup = s3c64xx_spi_cleanup;
master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
master->transfer_one_message = s3c64xx_spi_transfer_one_message;
master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
@ -1044,7 +1292,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
goto err1;
}
if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) {
if (!sci->cfg_gpio && pdev->dev.of_node) {
if (s3c64xx_spi_parse_dt_gpio(sdd))
return -EBUSY;
} else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
dev_err(&pdev->dev, "Unable to config gpio\n");
ret = -EBUSY;
goto err2;
@ -1080,7 +1331,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
}
/* Setup Deufult Mode */
s3c64xx_spi_hwinit(sdd, pdev->id);
s3c64xx_spi_hwinit(sdd, sdd->port_id);
spin_lock_init(&sdd->lock);
init_completion(&sdd->xfer_completion);
@ -1105,7 +1356,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
"with %d Slaves attached\n",
pdev->id, master->num_chipselect);
sdd->port_id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
@ -1125,6 +1376,8 @@ err5:
err4:
clk_put(sdd->clk);
err3:
if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
s3c64xx_spi_dt_gpio_free(sdd);
err2:
iounmap((void *) sdd->regs);
err1:
@ -1156,6 +1409,9 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
clk_disable(sdd->clk);
clk_put(sdd->clk);
if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
s3c64xx_spi_dt_gpio_free(sdd);
iounmap((void *) sdd->regs);
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@ -1180,6 +1436,9 @@ static int s3c64xx_spi_suspend(struct device *dev)
clk_disable(sdd->src_clk);
clk_disable(sdd->clk);
if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
s3c64xx_spi_dt_gpio_free(sdd);
sdd->cur_speed = 0; /* Output Clock is stopped */
return 0;
@ -1187,18 +1446,20 @@ static int s3c64xx_spi_suspend(struct device *dev)
static int s3c64xx_spi_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
sci->cfg_gpio(pdev);
if (!sci->cfg_gpio && dev->of_node)
s3c64xx_spi_parse_dt_gpio(sdd);
else
sci->cfg_gpio();
/* Enable the clock */
clk_enable(sdd->src_clk);
clk_enable(sdd->clk);
s3c64xx_spi_hwinit(sdd, pdev->id);
s3c64xx_spi_hwinit(sdd, sdd->port_id);
spi_master_resume(master);
@ -1236,13 +1497,89 @@ static const struct dev_pm_ops s3c64xx_spi_pm = {
s3c64xx_spi_runtime_resume, NULL)
};
struct s3c64xx_spi_port_config s3c2443_spi_port_config = {
.fifo_lvl_mask = { 0x7f },
.rx_lvl_offset = 13,
.tx_st_done = 21,
.high_speed = true,
};
struct s3c64xx_spi_port_config s3c6410_spi_port_config = {
.fifo_lvl_mask = { 0x7f, 0x7F },
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
struct s3c64xx_spi_port_config s5p64x0_spi_port_config = {
.fifo_lvl_mask = { 0x1ff, 0x7F },
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
struct s3c64xx_spi_port_config s5pc100_spi_port_config = {
.fifo_lvl_mask = { 0x7f, 0x7F },
.rx_lvl_offset = 13,
.tx_st_done = 21,
.high_speed = true,
};
struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
.fifo_lvl_mask = { 0x1ff, 0x7F },
.rx_lvl_offset = 15,
.tx_st_done = 25,
.high_speed = true,
};
struct s3c64xx_spi_port_config exynos4_spi_port_config = {
.fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
.rx_lvl_offset = 15,
.tx_st_done = 25,
.high_speed = true,
.clk_from_cmu = true,
};
static struct platform_device_id s3c64xx_spi_driver_ids[] = {
{
.name = "s3c2443-spi",
.driver_data = (kernel_ulong_t)&s3c2443_spi_port_config,
}, {
.name = "s3c6410-spi",
.driver_data = (kernel_ulong_t)&s3c6410_spi_port_config,
}, {
.name = "s5p64x0-spi",
.driver_data = (kernel_ulong_t)&s5p64x0_spi_port_config,
}, {
.name = "s5pc100-spi",
.driver_data = (kernel_ulong_t)&s5pc100_spi_port_config,
}, {
.name = "s5pv210-spi",
.driver_data = (kernel_ulong_t)&s5pv210_spi_port_config,
}, {
.name = "exynos4210-spi",
.driver_data = (kernel_ulong_t)&exynos4_spi_port_config,
},
{ },
};
#ifdef CONFIG_OF
static const struct of_device_id s3c64xx_spi_dt_match[] = {
{ .compatible = "samsung,exynos4210-spi",
.data = (void *)&exynos4_spi_port_config,
},
{ },
};
MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);
#endif /* CONFIG_OF */
static struct platform_driver s3c64xx_spi_driver = {
.driver = {
.name = "s3c64xx-spi",
.owner = THIS_MODULE,
.pm = &s3c64xx_spi_pm,
.of_match_table = of_match_ptr(s3c64xx_spi_dt_match),
},
.remove = s3c64xx_spi_remove,
.id_table = s3c64xx_spi_driver_ids,
};
MODULE_ALIAS("platform:s3c64xx-spi");