mtd: spi-nor: intel-spi: Add support for Intel Denverton SPI serial flash controller

Intel Denverton exposes the SPI serial flash controller as a PCI device
instead of being part of the LPC chip as previous generations did.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
This commit is contained in:
Mika Westerberg 2017-06-29 14:45:42 +03:00 committed by Cyrille Pitchen
parent f384b352cb
commit fe602838a6
3 changed files with 99 additions and 0 deletions

View File

@ -89,6 +89,22 @@ config SPI_NXP_SPIFI
config SPI_INTEL_SPI
tristate
config SPI_INTEL_SPI_PCI
tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT
depends on X86 && PCI
select SPI_INTEL_SPI
help
This enables PCI support for the Intel PCH/PCU SPI controller in
master mode. This controller is present in modern Intel hardware
and is used to hold BIOS and other persistent settings. Using
this driver it is possible to upgrade BIOS directly from Linux.
Say N here unless you know what you are doing. Overwriting the
SPI flash may render the system unbootable.
To compile this driver as a module, choose M here: the module
will be called intel-spi-pci.
config SPI_INTEL_SPI_PLATFORM
tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT
depends on X86

View File

@ -7,5 +7,6 @@ obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o
obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o
obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o
obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o

View File

@ -0,0 +1,82 @@
/*
* Intel PCH/PCU SPI flash PCI driver.
*
* Copyright (C) 2016, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "intel-spi.h"
#define BCR 0xdc
#define BCR_WPD BIT(0)
static const struct intel_spi_boardinfo bxt_info = {
.type = INTEL_SPI_BXT,
};
static int intel_spi_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct intel_spi_boardinfo *info;
struct intel_spi *ispi;
u32 bcr;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
/* Try to make the chip read/write */
pci_read_config_dword(pdev, BCR, &bcr);
if (!(bcr & BCR_WPD)) {
bcr |= BCR_WPD;
pci_write_config_dword(pdev, BCR, bcr);
pci_read_config_dword(pdev, BCR, &bcr);
}
info->writeable = !!(bcr & BCR_WPD);
ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info);
if (IS_ERR(ispi))
return PTR_ERR(ispi);
pci_set_drvdata(pdev, ispi);
return 0;
}
static void intel_spi_pci_remove(struct pci_dev *pdev)
{
intel_spi_remove(pci_get_drvdata(pdev));
}
static const struct pci_device_id intel_spi_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
{ },
};
MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
static struct pci_driver intel_spi_pci_driver = {
.name = "intel-spi",
.id_table = intel_spi_pci_ids,
.probe = intel_spi_pci_probe,
.remove = intel_spi_pci_remove,
};
module_pci_driver(intel_spi_pci_driver);
MODULE_DESCRIPTION("Intel PCH/PCU SPI flash PCI driver");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_LICENSE("GPL v2");