powerpc/83xx: Add support for MPC8377E-WLAN boards
MPC8377E-WLAN are basically RDB boards except: - RAM extended to 512 MB; - NAND flash removed, NOR flash extended to 64 MB; - Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; - Power management MCU removed; - PCI slot removed, another mini-PCI slot added (IRQ routing changed); - USB3300 PHY's ID pin grounded, thus USB port is host-only. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This commit is contained in:
Anton Vorontsov
Benjamin Herrenschmidt
parent
3475dd8a68
commit
fda4bd9bac
|
|
@ -0,0 +1,464 @@
|
|||
/*
|
||||
* MPC8377E WLAN Device Tree Source
|
||||
*
|
||||
* Copyright 2007-2009 Freescale Semiconductor Inc.
|
||||
* Copyright 2009 MontaVista Software, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
compatible = "fsl,mpc8377wlan";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8377@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <32768>;
|
||||
i-cache-size = <32768>;
|
||||
timebase-frequency = <0>;
|
||||
bus-frequency = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; // 512MB at 0
|
||||
};
|
||||
|
||||
localbus@e0005000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0xe0005000 0x1000>;
|
||||
interrupts = <77 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
ranges = <0x0 0x0 0xfc000000 0x04000000>;
|
||||
|
||||
flash@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x4000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0 0x8000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
reg = <0xa0000 0x300000>;
|
||||
label = "kernel";
|
||||
};
|
||||
|
||||
partition@3a0000 {
|
||||
reg = <0x3a0000 0x3c60000>;
|
||||
label = "rootfs";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
immr@e0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x0 0xe0000000 0x00100000>;
|
||||
reg = <0xe0000000 0x00000200>;
|
||||
bus-frequency = <0>;
|
||||
|
||||
wdt@200 {
|
||||
device_type = "watchdog";
|
||||
compatible = "mpc83xx_wdt";
|
||||
reg = <0x200 0x100>;
|
||||
};
|
||||
|
||||
gpio1: gpio-controller@c00 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
|
||||
reg = <0xc00 0x100>;
|
||||
interrupts = <74 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio2: gpio-controller@d00 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
|
||||
reg = <0xd00 0x100>;
|
||||
interrupts = <75 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
sleep-nexus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
sleep = <&pmc 0x0c000000>;
|
||||
ranges;
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <14 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
dfsrr;
|
||||
|
||||
at24@50 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <42 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
clock-frequency = <133333333>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <15 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
cell-index = <0>;
|
||||
compatible = "fsl,spi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <16 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
mode = "cpu";
|
||||
};
|
||||
|
||||
dma@82a8 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
|
||||
reg = <0x82a8 4>;
|
||||
ranges = <0 0x8100 0x1a8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <71 8>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
|
||||
reg = <0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <71 8>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <71 8>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <71 8>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
|
||||
reg = <0x180 0x28>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <71 8>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x23000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <38 0x8>;
|
||||
phy_type = "ulpi";
|
||||
sleep = <&pmc 0x00c00000>;
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <32 0x8 33 0x8 34 0x8>;
|
||||
phy-connection-type = "mii";
|
||||
interrupt-parent = <&ipic>;
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-handle = <&phy2>;
|
||||
sleep = <&pmc 0xc0000000>;
|
||||
fsl,magic-packet;
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x520 0x20>;
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <17 0x8>;
|
||||
reg = <0x2>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
|
||||
phy3: ethernet-phy@3 {
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <18 0x8>;
|
||||
reg = <0x3>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 0x8 36 0x8 37 0x8>;
|
||||
phy-connection-type = "mii";
|
||||
interrupt-parent = <&ipic>;
|
||||
phy-handle = <&phy3>;
|
||||
tbi-handle = <&tbi1>;
|
||||
sleep = <&pmc 0x30000000>;
|
||||
fsl,magic-packet;
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x520 0x20>;
|
||||
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <9 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <10 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
|
||||
"fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <11 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0x9fe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
sleep = <&pmc 0x03000000>;
|
||||
};
|
||||
|
||||
sata@18000 {
|
||||
compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <44 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
sleep = <&pmc 0x000000c0>;
|
||||
};
|
||||
|
||||
sata@19000 {
|
||||
compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
|
||||
reg = <0x19000 0x1000>;
|
||||
interrupts = <45 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
sleep = <&pmc 0x00000030>;
|
||||
};
|
||||
|
||||
/* IPIC
|
||||
* interrupts cell = <intr #, sense>
|
||||
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||
* sense == 8: Level, low assertion
|
||||
* sense == 2: Edge, high-to-low change
|
||||
*/
|
||||
ipic: interrupt-controller@700 {
|
||||
compatible = "fsl,ipic";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x700 0x100>;
|
||||
};
|
||||
|
||||
pmc: power@b00 {
|
||||
compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
|
||||
reg = <0xb00 0x100 0xa00 0x100>;
|
||||
interrupts = <80 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pci@e0008500 {
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
|
||||
|
||||
/* IDSEL AD14 IRQ6 inta */
|
||||
0x7000 0x0 0x0 0x1 &ipic 22 0x8
|
||||
|
||||
/* IDSEL AD15 IRQ5 inta */
|
||||
0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <66 0x8>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
||||
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
|
||||
sleep = <&pmc 0x00010000>;
|
||||
clock-frequency = <66666666>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xe0008500 0x100 /* internal registers */
|
||||
0xe0008300 0x8>; /* config space access registers */
|
||||
compatible = "fsl,mpc8349-pci";
|
||||
device_type = "pci";
|
||||
};
|
||||
|
||||
pci1: pcie@e0009000 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
|
||||
reg = <0xe0009000 0x00001000>;
|
||||
ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
|
||||
bus-range = <0 255>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &ipic 1 8
|
||||
0 0 0 2 &ipic 1 8
|
||||
0 0 0 3 &ipic 1 8
|
||||
0 0 0 4 &ipic 1 8>;
|
||||
sleep = <&pmc 0x00300000>;
|
||||
clock-frequency = <0>;
|
||||
|
||||
pcie@0 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
reg = <0 0 0 0 0>;
|
||||
ranges = <0x02000000 0 0xa8000000
|
||||
0x02000000 0 0xa8000000
|
||||
0 0x10000000
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00800000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@e000a000 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
|
||||
reg = <0xe000a000 0x00001000>;
|
||||
ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
|
||||
bus-range = <0 255>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &ipic 2 8
|
||||
0 0 0 2 &ipic 2 8
|
||||
0 0 0 3 &ipic 2 8
|
||||
0 0 0 4 &ipic 2 8>;
|
||||
sleep = <&pmc 0x000c0000>;
|
||||
clock-frequency = <0>;
|
||||
|
||||
pcie@0 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
reg = <0 0 0 0 0>;
|
||||
ranges = <0x02000000 0 0xc8000000
|
||||
0x02000000 0 0xc8000000
|
||||
0 0x10000000
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -75,11 +75,11 @@ config MPC837x_MDS
|
|||
This option enables support for the MPC837x MDS Processor Board.
|
||||
|
||||
config MPC837x_RDB
|
||||
bool "Freescale MPC837x RDB"
|
||||
bool "Freescale MPC837x RDB/WLAN"
|
||||
select DEFAULT_UIMAGE
|
||||
select PPC_MPC837x
|
||||
help
|
||||
This option enables support for the MPC837x RDB Board.
|
||||
This option enables support for the MPC837x RDB and WLAN Boards.
|
||||
|
||||
config SBC834x
|
||||
bool "Wind River SBC834x"
|
||||
|
|
|
|||
|
|
@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void)
|
|||
|
||||
return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
|
||||
of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
|
||||
of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
|
||||
of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
|
||||
of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
|
||||
}
|
||||
|
||||
define_machine(mpc837x_rdb) {
|
||||
.name = "MPC837x RDB",
|
||||
.name = "MPC837x RDB/WLAN",
|
||||
.probe = mpc837x_rdb_probe,
|
||||
.setup_arch = mpc837x_rdb_setup_arch,
|
||||
.init_IRQ = mpc837x_rdb_init_IRQ,
|
||||
|
|
|
|||
Loading…
Reference in New Issue