Merge tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel into drm-fixes

a few drm/i915 fixes, including a fix to the recent regression
reported by Sedat Dilek

* tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/bios: handle MIPI Sequence Block v3+ gracefully
  drm/i915: Add primary plane to mask if it's visible
  drm/i915: workaround bad DSL readout v3
  drm/i915: fix kernel-doc warnings in intel_audio.c

drivers/gpu/drm/i915/i915_irq.c

@@ -639,6 +639,32 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
 	else
 		position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
 
+	/*
+	 * On HSW, the DSL reg (0x70000) appears to return 0 if we
+	 * read it just before the start of vblank.  So try it again
+	 * so we don't accidentally end up spanning a vblank frame
+	 * increment, causing the pipe_update_end() code to squak at us.
+	 *
+	 * The nature of this problem means we can't simply check the ISR
+	 * bit and return the vblank start value; nor can we use the scanline
+	 * debug register in the transcoder as it appears to have the same
+	 * problem.  We may need to extend this to include other platforms,
+	 * but so far testing only shows the problem on HSW.
+	 */
+	if (IS_HASWELL(dev) && !position) {
+		int i, temp;
+
+		for (i = 0; i < 100; i++) {
+			udelay(1);
+			temp = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) &
+				DSL_LINEMASK_GEN3;
+			if (temp != position) {
+				position = temp;
+				break;
+			}
+		}
+	}
+
 	/*
 	 * See update_scanline_offset() for the details on the
 	 * scanline_offset adjustment.

drivers/gpu/drm/i915/intel_audio.c

@@ -430,7 +430,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
 
 /**
  * intel_audio_codec_disable - Disable the audio codec for HD audio
- * @encoder: encoder on which to disable audio
+ * @intel_encoder: encoder on which to disable audio
  *
  * The disable sequences must be performed before disabling the transcoder or
  * port.

drivers/gpu/drm/i915/intel_bios.c

@@ -42,7 +42,7 @@ find_section(const void *_bdb, int section_id)
 	const struct bdb_header *bdb = _bdb;
 	const u8 *base = _bdb;
 	int index = 0;
-	u16 total, current_size;
+	u32 total, current_size;
 	u8 current_id;
 
 	/* skip to first section */
@@ -57,6 +57,10 @@ find_section(const void *_bdb, int section_id)
 		current_size = *((const u16 *)(base + index));
 		index += 2;
 
+		/* The MIPI Sequence Block v3+ has a separate size field. */
+		if (current_id == BDB_MIPI_SEQUENCE && *(base + index) >= 3)
+			current_size = *((const u32 *)(base + index + 1));
+
 		if (index + current_size > total)
 			return NULL;
 
@@ -799,6 +803,12 @@ parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 		return;
 	}
 
+	/* Fail gracefully for forward incompatible sequence block. */
+	if (sequence->version >= 3) {
+		DRM_ERROR("Unable to parse MIPI Sequence Block v3+\n");
+		return;
+	}
+
 	DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
 
 	block_size = get_blocksize(sequence);

drivers/gpu/drm/i915/intel_display.c

@@ -15087,9 +15087,12 @@ static void readout_plane_state(struct intel_crtc *crtc,
 
 		plane_state = to_intel_plane_state(p->base.state);
 
-		if (p->base.type == DRM_PLANE_TYPE_PRIMARY)
+		if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
 			plane_state->visible = primary_get_hw_state(crtc);
-		else {
+			if (plane_state->visible)
+				crtc->base.state->plane_mask |=
+					1 << drm_plane_index(&p->base);
+		} else {
 			if (active)
 				p->disable_plane(&p->base, &crtc->base);