powerpc/85xx: Add support for P2020RDB board
Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Poonam Aggrwal
Kumar Gala
parent
fc4bdb35fb
commit
fb8e3e1fe1
|
|
@ -0,0 +1,586 @@
|
|||
/*
|
||||
* P2020 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
model = "fsl,P2020";
|
||||
compatible = "fsl,P2020RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P2020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P2020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
interrupts = <19 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
/* NOR and NAND Flashes */
|
||||
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
||||
0x1 0x0 0x0 0xffa00000 0x00040000
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 256KB for Vitesse 7385 Switch firmware */
|
||||
reg = <0x0 0x00040000>;
|
||||
label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
/* 256KB for DTB Image */
|
||||
reg = <0x00040000 0x00040000>;
|
||||
label = "NOR (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 3.5 MB for Linux Kernel Image */
|
||||
reg = <0x00080000 0x00380000>;
|
||||
label = "NOR (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
/* 11MB for JFFS2 based Root file System */
|
||||
reg = <0x00400000 0x00b00000>;
|
||||
label = "NOR (RW) JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
/* This location must not be altered */
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
/* 512KB for u-boot Environment Variables */
|
||||
reg = <0x00f00000 0x00100000>;
|
||||
label = "NOR (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-fcm-nand",
|
||||
"fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "NAND (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x00100000 0x00100000>;
|
||||
label = "NAND (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00200000 0x00400000>;
|
||||
label = "NAND (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
/* 4MB for Compressed Root file System Image */
|
||||
reg = <0x00600000 0x00400000>;
|
||||
label = "NAND (RO) Compressed RFS Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
/* 7MB for JFFS2 based Root file System */
|
||||
reg = <0x00a00000 0x00700000>;
|
||||
label = "NAND (RW) JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@1100000 {
|
||||
/* 15MB for JFFS2 based Root file System */
|
||||
reg = <0x01100000 0x00f00000>;
|
||||
label = "NAND (RW) Writable User area";
|
||||
};
|
||||
};
|
||||
|
||||
L2switch@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "vitesse-7385";
|
||||
reg = <0x2 0x0 0x20000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p2020-immr", "simple-bus";
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p2020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p2020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <18 2>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
cell-index = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
mode = "cpu";
|
||||
|
||||
fsl_m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,espi-flash";
|
||||
reg = <0>;
|
||||
linux,modalias = "fsl_m25p80";
|
||||
modal = "s25sl128b";
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00080000>;
|
||||
label = "SPI (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 512KB for DTB Image */
|
||||
reg = <0x00080000 0x00080000>;
|
||||
label = "SPI (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00100000 0x00400000>;
|
||||
label = "SPI (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
/* 4MB for Compressed RFS Image */
|
||||
reg = <0x00500000 0x00400000>;
|
||||
label = "SPI (RO) Compressed RFS Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
/* 7MB for JFFS2 based RFS */
|
||||
reg = <0x00900000 0x00700000>;
|
||||
label = "SPI (RW) JFFS2 RFS";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0xc300 0x4>;
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <76 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <77 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <78 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <79 2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p2020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <20 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <21 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <22 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <23 2>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <28 0x2>;
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <29 2 30 2 34 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fixed-link = <1 1 1000 0 0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x520 0x20>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 2 36 2 40 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "sgmii";
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x520 0x20>;
|
||||
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <2>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x26000 0x1000>;
|
||||
ranges = <0x0 0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <31 2 32 2 33 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
||||
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 58 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xbfe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p2020-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0
|
||||
0xe1 0
|
||||
0xe2 0
|
||||
0xe3 0
|
||||
0xe4 0
|
||||
0xe5 0
|
||||
0xe6 0
|
||||
0xe7 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
compatible = "fsl,p2020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <25 2>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <26 2>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xc0000000
|
||||
0x2000000 0x0 0xc0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
|
|||
CONFIG_MPC85xx_MDS=y
|
||||
CONFIG_MPC8536_DS=y
|
||||
CONFIG_MPC85xx_DS=y
|
||||
CONFIG_MPC85xx_RDB=y
|
||||
CONFIG_SOCRATES=y
|
||||
CONFIG_KSI8560=y
|
||||
# CONFIG_XES_MPC85xx is not set
|
||||
|
|
|
|||
|
|
@ -55,6 +55,15 @@ config MPC85xx_DS
|
|||
help
|
||||
This option enables support for the MPC85xx DS (MPC8544 DS) board
|
||||
|
||||
config MPC85xx_RDB
|
||||
bool "Freescale MPC85xx RDB"
|
||||
select PPC_I8259
|
||||
select DEFAULT_UIMAGE
|
||||
select FSL_ULI1575
|
||||
select SWIOTLB
|
||||
help
|
||||
This option enables support for the MPC85xx RDB (P2020 RDB) board
|
||||
|
||||
config SOCRATES
|
||||
bool "Socrates"
|
||||
select DEFAULT_UIMAGE
|
||||
|
|
|
|||
|
|
@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
|
|||
obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o
|
||||
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
|
||||
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
|
||||
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_SBC8560) += sbc8560.o
|
||||
obj-$(CONFIG_SBC8548) += sbc8548.o
|
||||
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
|
||||
obj-$(CONFIG_KSI8560) += ksi8560.o
|
||||
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
|
||||
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,141 @@
|
|||
/*
|
||||
* MPC85xx RDB Board Setup
|
||||
*
|
||||
* Copyright 2009 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
|
||||
#else
|
||||
#define DBG(fmt, args...)
|
||||
#endif
|
||||
|
||||
|
||||
void __init mpc85xx_rdb_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic;
|
||||
struct resource r;
|
||||
struct device_node *np;
|
||||
|
||||
np = of_find_node_by_type(NULL, "open-pic");
|
||||
if (np == NULL) {
|
||||
printk(KERN_ERR "Could not find open-pic node\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (of_address_to_resource(np, 0, &r)) {
|
||||
printk(KERN_ERR "Failed to map mpic register space\n");
|
||||
of_node_put(np);
|
||||
return;
|
||||
}
|
||||
|
||||
mpic = mpic_alloc(np, r.start,
|
||||
MPIC_PRIMARY | MPIC_WANTS_RESET |
|
||||
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
|
||||
MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
|
||||
BUG_ON(mpic == NULL);
|
||||
of_node_put(np);
|
||||
|
||||
mpic_init(mpic);
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
#ifdef CONFIG_SMP
|
||||
extern void __init mpc85xx_smp_init(void);
|
||||
#endif
|
||||
static void __init mpc85xx_rdb_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
mpc85xx_smp_init();
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
|
||||
}
|
||||
|
||||
static struct of_device_id __initdata mpc85xxrdb_ids[] = {
|
||||
{ .type = "soc", },
|
||||
{ .compatible = "soc", },
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{},
|
||||
};
|
||||
|
||||
static int __init mpc85xxrdb_publish_devices(void)
|
||||
{
|
||||
return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
|
||||
}
|
||||
machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p2020_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P2020RDB"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p2020_rdb) {
|
||||
.name = "P2020 RDB",
|
||||
.probe = p2020_rdb_probe,
|
||||
.setup_arch = mpc85xx_rdb_setup_arch,
|
||||
.init_IRQ = mpc85xx_rdb_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
Loading…
Reference in New Issue