From fa6557aff47f25e5b6b92c930a9b60a12acd0b58 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jan 2008 00:14:12 +0200 Subject: [PATCH] remove the obsolete xircom_tulip_cb driver The xircom_tulip_cb driver has been replaced the xircom_cb driver, and since it depended on BROKEN_ON_SMP it e.g. was no longer present in many distribution kernels. This patch therefore removes it. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/tulip/Kconfig | 15 +- drivers/net/tulip/Makefile | 1 - drivers/net/tulip/xircom_tulip_cb.c | 1726 --------------------------- 3 files changed, 1 insertion(+), 1741 deletions(-) delete mode 100644 drivers/net/tulip/xircom_tulip_cb.c diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index 20ac1503021e..d913405bc393 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -141,7 +141,7 @@ config ULI526X be called uli526x. config PCMCIA_XIRCOM - tristate "Xircom CardBus support (new driver)" + tristate "Xircom CardBus support" depends on CARDBUS ---help--- This driver is for the Digital "Tulip" Ethernet CardBus adapters. @@ -152,17 +152,4 @@ config PCMCIA_XIRCOM To compile this driver as a module, choose M here. The module will be called xircom_cb. If unsure, say N. -config PCMCIA_XIRTULIP - tristate "Xircom Tulip-like CardBus support (old driver)" - depends on CARDBUS && BROKEN_ON_SMP - select CRC32 - ---help--- - This driver is for the Digital "Tulip" Ethernet CardBus adapters. - It should work with most DEC 21*4*-based chips/ethercards, as well - as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and - ASIX. - - To compile this driver as a module, choose M here. The module will - be called xircom_tulip_cb. If unsure, say N. - endif # NET_TULIP diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 451090d6fcca..200cbf7c815c 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -2,7 +2,6 @@ # Makefile for the Linux "Tulip" family network device drivers. # -obj-$(CONFIG_PCMCIA_XIRTULIP) += xircom_tulip_cb.o obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o obj-$(CONFIG_DM9102) += dmfe.o obj-$(CONFIG_WINBOND_840) += winbond-840.o diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c deleted file mode 100644 index c3f8e303c6c7..000000000000 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ /dev/null @@ -1,1726 +0,0 @@ -/* xircom_tulip_cb.c: A Xircom CBE-100 ethernet driver for Linux. */ -/* - Written/copyright 1994-1999 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - -*/ - -#define DRV_NAME "xircom_tulip_cb" -#define DRV_VERSION "0.92" -#define DRV_RELDATE "June 27, 2006" - -/* A few user-configurable values. */ - -#define xircom_debug debug -#ifdef XIRCOM_DEBUG -static int xircom_debug = XIRCOM_DEBUG; -#else -static int xircom_debug = 1; -#endif - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 25; - -#define MAX_UNITS 4 -/* Used to pass the full-duplex flag, etc. */ -static int full_duplex[MAX_UNITS]; -static int options[MAX_UNITS]; -static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */ - -/* Keep the ring sizes a power of two for efficiency. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 -#define RX_RING_SIZE 32 - -/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ -#ifdef __alpha__ -static int rx_copybreak = 1518; -#else -static int rx_copybreak = 100; -#endif - -/* - Set the bus performance register. - Typical: Set 16 longword cache alignment, no burst limit. - Cache alignment bits 15:14 Burst length 13:8 - 0000 No alignment 0x00000000 unlimited 0800 8 longwords - 4000 8 longwords 0100 1 longword 1000 16 longwords - 8000 16 longwords 0200 2 longwords 2000 32 longwords - C000 32 longwords 0400 4 longwords - Warning: many older 486 systems are broken and require setting 0x00A04800 - 8 longword cache alignment, 8 longword burst. - ToDo: Non-Intel setting could be better. -*/ - -#if defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) -static int csr0 = 0x01A00000 | 0xE000; -#elif defined(__powerpc__) -static int csr0 = 0x01B00000 | 0x8000; -#elif defined(CONFIG_SPARC) -static int csr0 = 0x01B00080 | 0x8000; -#elif defined(__i386__) -static int csr0 = 0x01A00000 | 0x8000; -#else -#warning Processor architecture undefined! -static int csr0 = 0x00A00000 | 0x4800; -#endif - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (4 * HZ) -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ -#define PKT_SETUP_SZ 192 /* Size of the setup frame */ - -/* PCI registers */ -#define PCI_POWERMGMT 0x40 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include /* Processor type for cache alignment. */ -#include - - -/* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = -KERN_INFO DRV_NAME ".c derived from tulip.c:v0.91 4/14/99 becker@scyld.com\n" -KERN_INFO " unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE "\n"; - -MODULE_AUTHOR("Donald Becker "); -MODULE_DESCRIPTION("Xircom CBE-100 ethernet driver"); -MODULE_LICENSE("GPL v2"); -MODULE_VERSION(DRV_VERSION); - -module_param(debug, int, 0); -module_param(max_interrupt_work, int, 0); -module_param(rx_copybreak, int, 0); -module_param(csr0, int, 0); - -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); - -#define RUN_AT(x) (jiffies + (x)) - -/* - Theory of Operation - -I. Board Compatibility - -This device driver was forked from the driver for the DECchip "Tulip", -Digital's single-chip ethernet controllers for PCI. It supports Xircom's -almost-Tulip-compatible CBE-100 CardBus adapters. - -II. Board-specific settings - -PCI bus devices are configured by the system at boot time, so no jumpers -need to be set on the board. The system BIOS preferably should assign the -PCI INTA signal to an otherwise unused system IRQ line. - -III. Driver operation - -IIIa. Ring buffers - -The Xircom can use either ring buffers or lists of Tx and Rx descriptors. -This driver uses statically allocated rings of Rx and Tx descriptors, set at -compile time by RX/TX_RING_SIZE. This version of the driver allocates skbuffs -for the Rx ring buffers at open() time and passes the skb->data field to the -Xircom as receive data buffers. When an incoming frame is less than -RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is -copied to the new skbuff. When the incoming frame is larger, the skbuff is -passed directly up the protocol stack and replaced by a newly allocated -skbuff. - -The RX_COPYBREAK value is chosen to trade-off the memory wasted by -using a full-sized skbuff for small frames vs. the copying costs of larger -frames. For small frames the copying cost is negligible (esp. considering -that we are pre-loading the cache with immediately useful header -information). For large frames the copying cost is non-trivial, and the -larger copy might flush the cache of useful data. A subtle aspect of this -choice is that the Xircom only receives into longword aligned buffers, thus -the IP header at offset 14 isn't longword aligned for further processing. -Copied frames are put into the new skbuff at an offset of "+2", thus copying -has the beneficial effect of aligning the IP header and preloading the -cache. - -IIIC. Synchronization -The driver runs as two independent, single-threaded flows of control. One -is the send-packet routine, which enforces single-threaded use by the -dev->tbusy flag. The other thread is the interrupt handler, which is single -threaded by the hardware and other software. - -The send packet thread has partial control over the Tx ring and 'dev->tbusy' -flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next -queue slot is empty, it clears the tbusy flag when finished otherwise it sets -the 'tp->tx_full' flag. - -The interrupt handler has exclusive control over the Rx ring and records stats -from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so -we can't avoid the interrupt overhead by having the Tx routine reap the Tx -stats.) After reaping the stats, it marks the queue entry as empty by setting -the 'base' to zero. Iff the 'tp->tx_full' flag is set, it clears both the -tx_full and tbusy flags. - -IV. Notes - -IVb. References - -http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html -http://www.digital.com (search for current 21*4* datasheets and "21X4 SROM") -http://www.national.com/pf/DP/DP83840A.html - -IVc. Errata - -*/ - -/* A full-duplex map for media types. */ -enum MediaIs { - MediaIsFD = 1, MediaAlwaysFD=2, MediaIsMII=4, MediaIsFx=8, - MediaIs100=16}; -static const char media_cap[] = -{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20 }; - -/* Offsets to the Command and Status Registers, "CSRs". All accesses - must be longword instructions and quadword aligned. */ -enum xircom_offsets { - CSR0=0, CSR1=0x08, CSR2=0x10, CSR3=0x18, CSR4=0x20, CSR5=0x28, - CSR6=0x30, CSR7=0x38, CSR8=0x40, CSR9=0x48, CSR10=0x50, CSR11=0x58, - CSR12=0x60, CSR13=0x68, CSR14=0x70, CSR15=0x78, CSR16=0x04, }; - -/* The bits in the CSR5 status registers, mostly interrupt sources. */ -enum status_bits { - LinkChange=0x08000000, - NormalIntr=0x10000, NormalIntrMask=0x00014045, - AbnormalIntr=0x8000, AbnormalIntrMask=0x0a00a5a2, - ReservedIntrMask=0xe0001a18, - EarlyRxIntr=0x4000, BusErrorIntr=0x2000, - EarlyTxIntr=0x400, RxDied=0x100, RxNoBuf=0x80, RxIntr=0x40, - TxFIFOUnderflow=0x20, TxNoBuf=0x04, TxDied=0x02, TxIntr=0x01, -}; - -enum csr0_control_bits { - EnableMWI=0x01000000, EnableMRL=0x00800000, - EnableMRM=0x00200000, EqualBusPrio=0x02, - SoftwareReset=0x01, -}; - -enum csr6_control_bits { - ReceiveAllBit=0x40000000, AllMultiBit=0x80, PromiscBit=0x40, - HashFilterBit=0x01, FullDuplexBit=0x0200, - TxThresh10=0x400000, TxStoreForw=0x200000, - TxThreshMask=0xc000, TxThreshShift=14, - EnableTx=0x2000, EnableRx=0x02, - ReservedZeroMask=0x8d930134, ReservedOneMask=0x320c0000, - EnableTxRx=(EnableTx | EnableRx), -}; - - -enum tbl_flag { - HAS_MII=1, HAS_ACPI=2, -}; -static struct xircom_chip_table { - char *chip_name; - int valid_intrs; /* CSR7 interrupt enable settings */ - int flags; -} xircom_tbl[] = { - { "Xircom Cardbus Adapter", - LinkChange | NormalIntr | AbnormalIntr | BusErrorIntr | - RxDied | RxNoBuf | RxIntr | TxFIFOUnderflow | TxNoBuf | TxDied | TxIntr, - HAS_MII | HAS_ACPI, }, - { NULL, }, -}; -/* This matches the table above. */ -enum chips { - X3201_3, -}; - - -/* The Xircom Rx and Tx buffer descriptors. */ -struct xircom_rx_desc { - s32 status; - s32 length; - u32 buffer1, buffer2; -}; - -struct xircom_tx_desc { - s32 status; - s32 length; - u32 buffer1, buffer2; /* We use only buffer 1. */ -}; - -enum tx_desc0_status_bits { - Tx0DescOwned=0x80000000, Tx0DescError=0x8000, Tx0NoCarrier=0x0800, - Tx0LateColl=0x0200, Tx0ManyColl=0x0100, Tx0Underflow=0x02, -}; -enum tx_desc1_status_bits { - Tx1ComplIntr=0x80000000, Tx1LastSeg=0x40000000, Tx1FirstSeg=0x20000000, - Tx1SetupPkt=0x08000000, Tx1DisableCRC=0x04000000, Tx1RingWrap=0x02000000, - Tx1ChainDesc=0x01000000, Tx1NoPad=0x800000, Tx1HashSetup=0x400000, - Tx1WholePkt=(Tx1FirstSeg | Tx1LastSeg), -}; -enum rx_desc0_status_bits { - Rx0DescOwned=0x80000000, Rx0DescError=0x8000, Rx0NoSpace=0x4000, - Rx0Runt=0x0800, Rx0McastPkt=0x0400, Rx0FirstSeg=0x0200, Rx0LastSeg=0x0100, - Rx0HugeFrame=0x80, Rx0CRCError=0x02, - Rx0WholePkt=(Rx0FirstSeg | Rx0LastSeg), -}; -enum rx_desc1_status_bits { - Rx1RingWrap=0x02000000, Rx1ChainDesc=0x01000000, -}; - -struct xircom_private { - struct xircom_rx_desc rx_ring[RX_RING_SIZE]; - struct xircom_tx_desc tx_ring[TX_RING_SIZE]; - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - - /* The X3201-3 requires 4-byte aligned tx bufs */ - struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE]; - - /* The addresses of receive-in-place skbuffs. */ - struct sk_buff* rx_skbuff[RX_RING_SIZE]; - u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */ - int chip_id; - struct net_device_stats stats; - unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ - unsigned int tx_full:1; /* The Tx queue is full. */ - unsigned int speed100:1; - unsigned int full_duplex:1; /* Full-duplex operation requested. */ - unsigned int autoneg:1; - unsigned int default_port:4; /* Last dev->if_port value. */ - unsigned int open:1; - unsigned int csr0; /* CSR0 setting. */ - unsigned int csr6; /* Current CSR6 control settings. */ - u16 to_advertise; /* NWay capabilities advertised. */ - u16 advertising[4]; - signed char phys[4], mii_cnt; /* MII device addresses. */ - int saved_if_port; - struct pci_dev *pdev; - spinlock_t lock; -}; - -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static void xircom_up(struct net_device *dev); -static void xircom_down(struct net_device *dev); -static int xircom_open(struct net_device *dev); -static void xircom_tx_timeout(struct net_device *dev); -static void xircom_init_ring(struct net_device *dev); -static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev); -static int xircom_rx(struct net_device *dev); -static void xircom_media_change(struct net_device *dev); -static irqreturn_t xircom_interrupt(int irq, void *dev_instance); -static int xircom_close(struct net_device *dev); -static struct net_device_stats *xircom_get_stats(struct net_device *dev); -static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void set_rx_mode(struct net_device *dev); -static void check_duplex(struct net_device *dev); -static const struct ethtool_ops ops; - - -/* The Xircom cards are picky about when certain bits in CSR6 can be - manipulated. Keith Owens . */ -static void outl_CSR6(u32 newcsr6, long ioaddr) -{ - const int strict_bits = - TxThresh10 | TxStoreForw | TxThreshMask | EnableTxRx | FullDuplexBit; - int csr5, csr5_22_20, csr5_19_17, currcsr6, attempts = 200; - unsigned long flags; - save_flags(flags); - cli(); - /* mask out the reserved bits that always read 0 on the Xircom cards */ - newcsr6 &= ~ReservedZeroMask; - /* or in the reserved bits that always read 1 */ - newcsr6 |= ReservedOneMask; - currcsr6 = inl(ioaddr + CSR6); - if (((newcsr6 & strict_bits) == (currcsr6 & strict_bits)) || - ((currcsr6 & ~EnableTxRx) == 0)) { - outl(newcsr6, ioaddr + CSR6); /* safe */ - restore_flags(flags); - return; - } - /* make sure the transmitter and receiver are stopped first */ - currcsr6 &= ~EnableTxRx; - while (1) { - csr5 = inl(ioaddr + CSR5); - if (csr5 == 0xffffffff) - break; /* cannot read csr5, card removed? */ - csr5_22_20 = csr5 & 0x700000; - csr5_19_17 = csr5 & 0x0e0000; - if ((csr5_22_20 == 0 || csr5_22_20 == 0x600000) && - (csr5_19_17 == 0 || csr5_19_17 == 0x80000 || csr5_19_17 == 0xc0000)) - break; /* both are stopped or suspended */ - if (!--attempts) { - printk(KERN_INFO DRV_NAME ": outl_CSR6 too many attempts," - "csr5=0x%08x\n", csr5); - outl(newcsr6, ioaddr + CSR6); /* unsafe but do it anyway */ - restore_flags(flags); - return; - } - outl(currcsr6, ioaddr + CSR6); - udelay(1); - } - /* now it is safe to change csr6 */ - outl(newcsr6, ioaddr + CSR6); - restore_flags(flags); -} - - -static void __devinit read_mac_address(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - int i, j; - unsigned char tuple, link, data_id, data_count; - - /* Xircom has its address stored in the CIS; - * we access it through the boot rom interface for now - * this might not work, as the CIS is not parsed but I - * (danilo) use the offset I found on my card's CIS !!! - * - * Doug Ledford: I changed this routine around so that it - * walks the CIS memory space, parsing the config items, and - * finds the proper lan_node_id tuple and uses the data - * stored there. - */ - outl(1 << 12, ioaddr + CSR9); /* enable boot rom access */ - for (i = 0x100; i < 0x1f7; i += link+2) { - outl(i, ioaddr + CSR10); - tuple = inl(ioaddr + CSR9) & 0xff; - outl(i + 1, ioaddr + CSR10); - link = inl(ioaddr + CSR9) & 0xff; - outl(i + 2, ioaddr + CSR10); - data_id = inl(ioaddr + CSR9) & 0xff; - outl(i + 3, ioaddr + CSR10); - data_count = inl(ioaddr + CSR9) & 0xff; - if ( (tuple == 0x22) && - (data_id == 0x04) && (data_count == 0x06) ) { - /* - * This is it. We have the data we want. - */ - for (j = 0; j < 6; j++) { - outl(i + j + 4, ioaddr + CSR10); - dev->dev_addr[j] = inl(ioaddr + CSR9) & 0xff; - } - break; - } else if (link == 0) { - break; - } - } -} - - -/* - * locate the MII interfaces and initialize them. - * we disable full-duplex modes here, - * because we don't know how to handle them. - */ -static void find_mii_transceivers(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int phy, phy_idx; - - if (media_cap[tp->default_port] & MediaIsMII) { - u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 }; - tp->to_advertise = media2advert[tp->default_port - 9]; - } else - tp->to_advertise = - /*ADVERTISE_100BASE4 | ADVERTISE_100FULL |*/ ADVERTISE_100HALF | - /*ADVERTISE_10FULL |*/ ADVERTISE_10HALF | ADVERTISE_CSMA; - - /* Find the connected MII xcvrs. - Doing this in open() would allow detecting external xcvrs later, - but takes much time. */ - for (phy = 0, phy_idx = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) { - int mii_status = mdio_read(dev, phy, MII_BMSR); - if ((mii_status & (BMSR_100BASE4 | BMSR_100HALF | BMSR_10HALF)) == BMSR_100BASE4 || - ((mii_status & BMSR_100BASE4) == 0 && - (mii_status & (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | BMSR_10HALF)) != 0)) { - int mii_reg0 = mdio_read(dev, phy, MII_BMCR); - int mii_advert = mdio_read(dev, phy, MII_ADVERTISE); - int reg4 = ((mii_status >> 6) & tp->to_advertise) | ADVERTISE_CSMA; - tp->phys[phy_idx] = phy; - tp->advertising[phy_idx++] = reg4; - printk(KERN_INFO "%s: MII transceiver #%d " - "config %4.4x status %4.4x advertising %4.4x.\n", - dev->name, phy, mii_reg0, mii_status, mii_advert); - } - } - tp->mii_cnt = phy_idx; - if (phy_idx == 0) { - printk(KERN_INFO "%s: ***WARNING***: No MII transceiver found!\n", - dev->name); - tp->phys[0] = 0; - } -} - - -/* - * To quote Arjan van de Ven: - * transceiver_voodoo() enables the external UTP plug thingy. - * it's called voodoo as I stole this code and cannot cross-reference - * it with the specification. - * Actually it seems to go like this: - * - GPIO2 enables the MII itself so we can talk to it. The MII gets reset - * so any prior MII settings are lost. - * - GPIO0 enables the TP port so the MII can talk to the network. - * - a software reset will reset both GPIO pins. - * I also moved the software reset here, because doing it in xircom_up() - * required enabling the GPIO pins each time, which reset the MII each time. - * Thus we couldn't control the MII -- which sucks because we don't know - * how to handle full-duplex modes so we *must* disable them. - */ -static void transceiver_voodoo(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ - outl(SoftwareReset, ioaddr + CSR0); - udelay(2); - - /* Deassert reset. */ - outl(tp->csr0, ioaddr + CSR0); - - /* Reset the xcvr interface and turn on heartbeat. */ - outl(0x0008, ioaddr + CSR15); - udelay(5); /* The delays are Xircom-recommended to give the - * chipset time to reset the actual hardware - * on the PCMCIA card - */ - outl(0xa8050000, ioaddr + CSR15); - udelay(5); - outl(0xa00f0000, ioaddr + CSR15); - udelay(5); - - outl_CSR6(0, ioaddr); - //outl_CSR6(FullDuplexBit, ioaddr); -} - - -static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct net_device *dev; - struct xircom_private *tp; - static int board_idx = -1; - int chip_idx = id->driver_data; - long ioaddr; - int i; - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - //printk(KERN_INFO "xircom_init_one(%s)\n", pci_name(pdev)); - - board_idx++; - - if (pci_enable_device(pdev)) - return -ENODEV; - - pci_set_master(pdev); - - ioaddr = pci_resource_start(pdev, 0); - dev = alloc_etherdev(sizeof(*tp)); - if (!dev) { - printk (KERN_ERR DRV_NAME "%d: cannot alloc etherdev, aborting\n", board_idx); - return -ENOMEM; - } - SET_NETDEV_DEV(dev, &pdev->dev); - - dev->base_addr = ioaddr; - dev->irq = pdev->irq; - - if (pci_request_regions(pdev, dev->name)) { - printk (KERN_ERR DRV_NAME " %d: cannot reserve PCI resources, aborting\n", board_idx); - goto err_out_free_netdev; - } - - /* Bring the chip out of sleep mode. - Caution: Snooze mode does not work with some boards! */ - if (xircom_tbl[chip_idx].flags & HAS_ACPI) - pci_write_config_dword(pdev, PCI_POWERMGMT, 0); - - /* Stop the chip's Tx and Rx processes. */ - outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr); - /* Clear the missed-packet counter. */ - (volatile int)inl(ioaddr + CSR8); - - tp = netdev_priv(dev); - - spin_lock_init(&tp->lock); - tp->pdev = pdev; - tp->chip_id = chip_idx; - /* BugFixes: The 21143-TD hangs with PCI Write-and-Invalidate cycles. */ - /* XXX: is this necessary for Xircom? */ - tp->csr0 = csr0 & ~EnableMWI; - - pci_set_drvdata(pdev, dev); - - /* The lower four bits are the media type. */ - if (board_idx >= 0 && board_idx < MAX_UNITS) { - tp->default_port = options[board_idx] & 15; - if ((options[board_idx] & 0x90) || full_duplex[board_idx] > 0) - tp->full_duplex = 1; - if (mtu[board_idx] > 0) - dev->mtu = mtu[board_idx]; - } - if (dev->mem_start) - tp->default_port = dev->mem_start; - if (tp->default_port) { - if (media_cap[tp->default_port] & MediaAlwaysFD) - tp->full_duplex = 1; - } - if (tp->full_duplex) - tp->autoneg = 0; - else - tp->autoneg = 1; - tp->speed100 = 1; - - /* The Xircom-specific entries in the device structure. */ - dev->open = &xircom_open; - dev->hard_start_xmit = &xircom_start_xmit; - dev->stop = &xircom_close; - dev->get_stats = &xircom_get_stats; - dev->do_ioctl = &xircom_ioctl; -#ifdef HAVE_MULTICAST - dev->set_multicast_list = &set_rx_mode; -#endif - dev->tx_timeout = xircom_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - SET_ETHTOOL_OPS(dev, &ops); - - transceiver_voodoo(dev); - - read_mac_address(dev); - - if (register_netdev(dev)) - goto err_out_cleardev; - - printk(KERN_INFO "%s: %s rev %d at %#3lx,", - dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr); - for (i = 0; i < 6; i++) - printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]); - printk(", IRQ %d.\n", dev->irq); - - if (xircom_tbl[chip_idx].flags & HAS_MII) { - find_mii_transceivers(dev); - check_duplex(dev); - } - - return 0; - -err_out_cleardev: - pci_set_drvdata(pdev, NULL); - pci_release_regions(pdev); -err_out_free_netdev: - free_netdev(dev); - return -ENODEV; -} - - -/* MII transceiver control section. - Read and write the MII registers using software-generated serial - MDIO protocol. See the MII specifications or DP83840A data sheet - for details. */ - -/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back PCI I/O cycles, but we insert a delay to avoid - "overclocking" issues or future 66Mhz PCI. */ -#define mdio_delay() inl(mdio_addr) - -/* Read and write the MII registers using software-generated serial - MDIO protocol. It is just different enough from the EEPROM protocol - to not share code. The maxium data clock rate is 2.5 Mhz. */ -#define MDIO_SHIFT_CLK 0x10000 -#define MDIO_DATA_WRITE0 0x00000 -#define MDIO_DATA_WRITE1 0x20000 -#define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */ -#define MDIO_ENB_IN 0x40000 -#define MDIO_DATA_READ 0x80000 - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - int i; - int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; - int retval = 0; - long ioaddr = dev->base_addr; - long mdio_addr = ioaddr + CSR9; - - /* Establish sync by sending at least 32 logic ones. */ - for (i = 32; i >= 0; i--) { - outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - - outl(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { - outl(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - retval = (retval << 1) | ((inl(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); - outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - return (retval>>1) & 0xffff; -} - - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - int i; - int cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; - long ioaddr = dev->base_addr; - long mdio_addr = ioaddr + CSR9; - - /* Establish sync by sending 32 logic ones. */ - for (i = 32; i >= 0; i--) { - outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - outl(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - outl(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - return; -} - - -static void -xircom_up(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - int i; - - xircom_init_ring(dev); - /* Clear the tx ring */ - for (i = 0; i < TX_RING_SIZE; i++) { - tp->tx_skbuff[i] = NULL; - tp->tx_ring[i].status = 0; - } - - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: xircom_up() irq %d.\n", dev->name, dev->irq); - - outl(virt_to_bus(tp->rx_ring), ioaddr + CSR3); - outl(virt_to_bus(tp->tx_ring), ioaddr + CSR4); - - tp->saved_if_port = dev->if_port; - if (dev->if_port == 0) - dev->if_port = tp->default_port; - - tp->csr6 = TxThresh10 /*| FullDuplexBit*/; /* XXX: why 10 and not 100? */ - - set_rx_mode(dev); - - /* Start the chip's Tx to process setup frame. */ - outl_CSR6(tp->csr6, ioaddr); - outl_CSR6(tp->csr6 | EnableTx, ioaddr); - - /* Acknowledge all outstanding interrupts sources */ - outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); - /* Enable interrupts by setting the interrupt mask. */ - outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); - /* Enable Rx */ - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - /* Rx poll demand */ - outl(0, ioaddr + CSR2); - - /* Tell the net layer we're ready */ - netif_start_queue (dev); - - /* Check current media state */ - xircom_media_change(dev); - - if (xircom_debug > 2) { - printk(KERN_DEBUG "%s: Done xircom_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n", - dev->name, inl(ioaddr + CSR0), inl(ioaddr + CSR5), - inl(ioaddr + CSR6)); - } -} - - -static int -xircom_open(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - - if (request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev)) - return -EAGAIN; - - xircom_up(dev); - tp->open = 1; - - return 0; -} - - -static void xircom_tx_timeout(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - if (media_cap[dev->if_port] & MediaIsMII) { - /* Do nothing -- the media monitor should handle this. */ - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Transmit timeout using MII device.\n", - dev->name); - } - -#if defined(way_too_many_messages) - if (xircom_debug > 3) { - int i; - for (i = 0; i < RX_RING_SIZE; i++) { - u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); - int j; - printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x " - "%2.2x %2.2x %2.2x.\n", - i, (unsigned int)tp->rx_ring[i].status, - (unsigned int)tp->rx_ring[i].length, - (unsigned int)tp->rx_ring[i].buffer1, - (unsigned int)tp->rx_ring[i].buffer2, - buf[0], buf[1], buf[2]); - for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) printk(" %2.2x", buf[j]); - printk(" j=%d.\n", j); - } - printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); - printk("\n"); - } -#endif - - /* Stop and restart the chip's Tx/Rx processes . */ - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - /* Trigger an immediate transmit demand. */ - outl(0, ioaddr + CSR1); - - dev->trans_start = jiffies; - netif_wake_queue (dev); - tp->stats.tx_errors++; -} - - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void xircom_init_ring(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int i; - - tp->tx_full = 0; - tp->cur_rx = tp->cur_tx = 0; - tp->dirty_rx = tp->dirty_tx = 0; - - for (i = 0; i < RX_RING_SIZE; i++) { - tp->rx_ring[i].status = 0; - tp->rx_ring[i].length = PKT_BUF_SZ; - tp->rx_ring[i].buffer2 = virt_to_bus(&tp->rx_ring[i+1]); - tp->rx_skbuff[i] = NULL; - } - /* Mark the last entry as wrapping the ring. */ - tp->rx_ring[i-1].length = PKT_BUF_SZ | Rx1RingWrap; - tp->rx_ring[i-1].buffer2 = virt_to_bus(&tp->rx_ring[0]); - - for (i = 0; i < RX_RING_SIZE; i++) { - /* Note the receive buffer must be longword aligned. - dev_alloc_skb() provides 16 byte alignment. But do *not* - use skb_reserve() to align the IP header! */ - struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); - tp->rx_skbuff[i] = skb; - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[i].status = Rx0DescOwned; /* Owned by Xircom chip */ - tp->rx_ring[i].buffer1 = virt_to_bus(skb->data); - } - tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - - /* The Tx buffer descriptor is filled in as needed, but we - do need to clear the ownership bit. */ - for (i = 0; i < TX_RING_SIZE; i++) { - tp->tx_skbuff[i] = NULL; - tp->tx_ring[i].status = 0; - tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]); - if (tp->chip_id == X3201_3) - tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ); - } - tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]); -} - - -static int -xircom_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int entry; - u32 flag; - - /* Caution: the write order is important here, set the base address - with the "ownership" bits last. */ - - /* Calculate the next Tx descriptor entry. */ - entry = tp->cur_tx % TX_RING_SIZE; - - tp->tx_skbuff[entry] = skb; - if (tp->chip_id == X3201_3) { - skb_copy_from_linear_data(skb, - tp->tx_aligned_skbuff[entry]->data, - skb->len); - tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data); - } else - tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data); - - if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ - flag = Tx1WholePkt; /* No interrupt */ - } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) { - flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */ - } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) { - flag = Tx1WholePkt; /* No Tx-done intr. */ - } else { - /* Leave room for set_rx_mode() to fill entries. */ - flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */ - tp->tx_full = 1; - } - if (entry == TX_RING_SIZE - 1) - flag |= Tx1WholePkt | Tx1ComplIntr | Tx1RingWrap; - - tp->tx_ring[entry].length = skb->len | flag; - tp->tx_ring[entry].status = Tx0DescOwned; /* Pass ownership to the chip. */ - tp->cur_tx++; - if (tp->tx_full) - netif_stop_queue (dev); - else - netif_wake_queue (dev); - - /* Trigger an immediate transmit demand. */ - outl(0, dev->base_addr + CSR1); - - dev->trans_start = jiffies; - - return 0; -} - - -static void xircom_media_change(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - u16 reg0, reg1, reg4, reg5; - u32 csr6 = inl(ioaddr + CSR6), newcsr6; - - /* reset status first */ - mdio_read(dev, tp->phys[0], MII_BMCR); - mdio_read(dev, tp->phys[0], MII_BMSR); - - reg0 = mdio_read(dev, tp->phys[0], MII_BMCR); - reg1 = mdio_read(dev, tp->phys[0], MII_BMSR); - - if (reg1 & BMSR_LSTATUS) { - /* link is up */ - if (reg0 & BMCR_ANENABLE) { - /* autonegotiation is enabled */ - reg4 = mdio_read(dev, tp->phys[0], MII_ADVERTISE); - reg5 = mdio_read(dev, tp->phys[0], MII_LPA); - if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) { - tp->speed100 = 1; - tp->full_duplex = 1; - } else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) { - tp->speed100 = 1; - tp->full_duplex = 0; - } else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) { - tp->speed100 = 0; - tp->full_duplex = 1; - } else { - tp->speed100 = 0; - tp->full_duplex = 0; - } - } else { - /* autonegotiation is disabled */ - if (reg0 & BMCR_SPEED100) - tp->speed100 = 1; - else - tp->speed100 = 0; - if (reg0 & BMCR_FULLDPLX) - tp->full_duplex = 1; - else - tp->full_duplex = 0; - } - printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", - dev->name, - tp->speed100 ? "100" : "10", - tp->full_duplex ? "full" : "half"); - netif_carrier_on(dev); - newcsr6 = csr6 & ~FullDuplexBit; - if (tp->full_duplex) - newcsr6 |= FullDuplexBit; - if (newcsr6 != csr6) - outl_CSR6(newcsr6, ioaddr + CSR6); - } else { - printk(KERN_DEBUG "%s: Link is down\n", dev->name); - netif_carrier_off(dev); - } -} - - -static void check_duplex(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 reg0; - - mdio_write(dev, tp->phys[0], MII_BMCR, BMCR_RESET); - udelay(500); - while (mdio_read(dev, tp->phys[0], MII_BMCR) & BMCR_RESET); - - reg0 = mdio_read(dev, tp->phys[0], MII_BMCR); - mdio_write(dev, tp->phys[0], MII_ADVERTISE, tp->advertising[0]); - - if (tp->autoneg) { - reg0 &= ~(BMCR_SPEED100 | BMCR_FULLDPLX); - reg0 |= BMCR_ANENABLE | BMCR_ANRESTART; - } else { - reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART); - if (tp->speed100) - reg0 |= BMCR_SPEED100; - if (tp->full_duplex) - reg0 |= BMCR_FULLDPLX; - printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", - dev->name, - tp->speed100 ? "100" : "10", - tp->full_duplex ? "full" : "half"); - } - mdio_write(dev, tp->phys[0], MII_BMCR, reg0); -} - - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t xircom_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - int csr5, work_budget = max_interrupt_work; - int handled = 0; - - spin_lock (&tp->lock); - - do { - csr5 = inl(ioaddr + CSR5); - /* Acknowledge all of the current interrupt sources ASAP. */ - outl(csr5 & 0x0001ffff, ioaddr + CSR5); - - if (xircom_debug > 4) - printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n", - dev->name, csr5, inl(dev->base_addr + CSR5)); - - if (csr5 == 0xffffffff) - break; /* all bits set, assume PCMCIA card removed */ - - if ((csr5 & (NormalIntr|AbnormalIntr)) == 0) - break; - - handled = 1; - - if (csr5 & (RxIntr | RxNoBuf)) - work_budget -= xircom_rx(dev); - - if (csr5 & (TxNoBuf | TxDied | TxIntr)) { - unsigned int dirty_tx; - - for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0; - dirty_tx++) { - int entry = dirty_tx % TX_RING_SIZE; - int status = tp->tx_ring[entry].status; - - if (status < 0) - break; /* It still hasn't been Txed */ - /* Check for Rx filter setup frames. */ - if (tp->tx_skbuff[entry] == NULL) - continue; - - if (status & Tx0DescError) { - /* There was an major error, log it. */ -#ifndef final_version - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", - dev->name, status); -#endif - tp->stats.tx_errors++; - if (status & Tx0ManyColl) { - tp->stats.tx_aborted_errors++; - } - if (status & Tx0NoCarrier) tp->stats.tx_carrier_errors++; - if (status & Tx0LateColl) tp->stats.tx_window_errors++; - if (status & Tx0Underflow) tp->stats.tx_fifo_errors++; - } else { - tp->stats.tx_bytes += tp->tx_ring[entry].length & 0x7ff; - tp->stats.collisions += (status >> 3) & 15; - tp->stats.tx_packets++; - } - - /* Free the original skb. */ - dev_kfree_skb_irq(tp->tx_skbuff[entry]); - tp->tx_skbuff[entry] = NULL; - } - -#ifndef final_version - if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { - printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n", - dev->name, dirty_tx, tp->cur_tx, tp->tx_full); - dirty_tx += TX_RING_SIZE; - } -#endif - - if (tp->tx_full && - tp->cur_tx - dirty_tx < TX_RING_SIZE - 2) - /* The ring is no longer full */ - tp->tx_full = 0; - - if (tp->tx_full) - netif_stop_queue (dev); - else - netif_wake_queue (dev); - - tp->dirty_tx = dirty_tx; - if (csr5 & TxDied) { - if (xircom_debug > 2) - printk(KERN_WARNING "%s: The transmitter stopped." - " CSR5 is %x, CSR6 %x, new CSR6 %x.\n", - dev->name, csr5, inl(ioaddr + CSR6), tp->csr6); - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - } - - /* Log errors. */ - if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */ - if (csr5 & LinkChange) - xircom_media_change(dev); - if (csr5 & TxFIFOUnderflow) { - if ((tp->csr6 & TxThreshMask) != TxThreshMask) - tp->csr6 += (1 << TxThreshShift); /* Bump up the Tx threshold */ - else - tp->csr6 |= TxStoreForw; /* Store-n-forward. */ - /* Restart the transmit process. */ - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - if (csr5 & RxDied) { /* Missed a Rx frame. */ - tp->stats.rx_errors++; - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - /* Clear all error sources, included undocumented ones! */ - outl(0x0800f7ba, ioaddr + CSR5); - } - if (--work_budget < 0) { - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Too much work during an interrupt, " - "csr5=0x%8.8x.\n", dev->name, csr5); - /* Acknowledge all interrupt sources. */ - outl(0x8001ffff, ioaddr + CSR5); - break; - } - } while (1); - - if (xircom_debug > 3) - printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n", - dev->name, inl(ioaddr + CSR5)); - - spin_unlock (&tp->lock); - return IRQ_RETVAL(handled); -} - - -static int -xircom_rx(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int entry = tp->cur_rx % RX_RING_SIZE; - int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx; - int work_done = 0; - - if (xircom_debug > 4) - printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); - /* If we own the next entry, it's a new packet. Send it up. */ - while (tp->rx_ring[entry].status >= 0) { - s32 status = tp->rx_ring[entry].status; - - if (xircom_debug > 5) - printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); - if (--rx_work_limit < 0) - break; - if ((status & 0x38008300) != 0x0300) { - if ((status & 0x38000300) != 0x0300) { - /* Ignore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Oversized Ethernet frame " - "spanned multiple buffers, status %8.8x!\n", - dev->name, status); - tp->stats.rx_length_errors++; - } - } else if (status & Rx0DescError) { - /* There was a fatal error. */ - if (xircom_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n", - dev->name, status); - tp->stats.rx_errors++; /* end of a packet.*/ - if (status & (Rx0Runt | Rx0HugeFrame)) tp->stats.rx_length_errors++; - if (status & Rx0CRCError) tp->stats.rx_crc_errors++; - } - } else { - /* Omit the four octet CRC from the length. */ - short pkt_len = ((status >> 16) & 0x7ff) - 4; - struct sk_buff *skb; - -#ifndef final_version - if (pkt_len > 1518) { - printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n", - dev->name, pkt_len, pkt_len); - pkt_len = 1518; - tp->stats.rx_length_errors++; - } -#endif - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak - && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ -#if ! defined(__alpha__) - skb_copy_to_linear_data(skb, bus_to_virt(tp->rx_ring[entry].buffer1), - pkt_len); - skb_put(skb, pkt_len); -#else - memcpy(skb_put(skb, pkt_len), - bus_to_virt(tp->rx_ring[entry].buffer1), pkt_len); -#endif - work_done++; - } else { /* Pass up the skb already on the Rx ring. */ - skb_put(skb = tp->rx_skbuff[entry], pkt_len); - tp->rx_skbuff[entry] = NULL; - } - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - tp->stats.rx_packets++; - tp->stats.rx_bytes += pkt_len; - } - entry = (++tp->cur_rx) % RX_RING_SIZE; - } - - /* Refill the Rx ring buffers. */ - for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) { - entry = tp->dirty_rx % RX_RING_SIZE; - if (tp->rx_skbuff[entry] == NULL) { - struct sk_buff *skb; - skb = tp->rx_skbuff[entry] = dev_alloc_skb(PKT_BUF_SZ); - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[entry].buffer1 = virt_to_bus(skb->data); - work_done++; - } - tp->rx_ring[entry].status = Rx0DescOwned; - } - - return work_done; -} - - -static void -xircom_down(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct xircom_private *tp = netdev_priv(dev); - - /* Disable interrupts by clearing the interrupt mask. */ - outl(0, ioaddr + CSR7); - /* Stop the chip's Tx and Rx processes. */ - outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr); - - if (inl(ioaddr + CSR6) != 0xffffffff) - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - - dev->if_port = tp->saved_if_port; -} - - -static int -xircom_close(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct xircom_private *tp = netdev_priv(dev); - int i; - - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, inl(ioaddr + CSR5)); - - netif_stop_queue(dev); - - if (netif_device_present(dev)) - xircom_down(dev); - - free_irq(dev->irq, dev); - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = tp->rx_skbuff[i]; - tp->rx_skbuff[i] = NULL; - tp->rx_ring[i].status = 0; /* Not owned by Xircom chip. */ - tp->rx_ring[i].length = 0; - tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */ - if (skb) { - dev_kfree_skb(skb); - } - } - for (i = 0; i < TX_RING_SIZE; i++) { - if (tp->tx_skbuff[i]) - dev_kfree_skb(tp->tx_skbuff[i]); - tp->tx_skbuff[i] = NULL; - } - - tp->open = 0; - return 0; -} - - -static struct net_device_stats *xircom_get_stats(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - if (netif_device_present(dev)) - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - - return &tp->stats; -} - -static int xircom_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct xircom_private *tp = netdev_priv(dev); - ecmd->supported = - SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII; - - ecmd->advertising = ADVERTISED_MII; - if (tp->advertising[0] & ADVERTISE_10HALF) - ecmd->advertising |= ADVERTISED_10baseT_Half; - if (tp->advertising[0] & ADVERTISE_10FULL) - ecmd->advertising |= ADVERTISED_10baseT_Full; - if (tp->advertising[0] & ADVERTISE_100HALF) - ecmd->advertising |= ADVERTISED_100baseT_Half; - if (tp->advertising[0] & ADVERTISE_100FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - if (tp->autoneg) { - ecmd->advertising |= ADVERTISED_Autoneg; - ecmd->autoneg = AUTONEG_ENABLE; - } else - ecmd->autoneg = AUTONEG_DISABLE; - - ecmd->port = PORT_MII; - ecmd->transceiver = XCVR_INTERNAL; - ecmd->phy_address = tp->phys[0]; - ecmd->speed = tp->speed100 ? SPEED_100 : SPEED_10; - ecmd->duplex = tp->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - ecmd->maxtxpkt = TX_RING_SIZE / 2; - ecmd->maxrxpkt = 0; - return 0; -} - -static int xircom_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 autoneg, speed100, full_duplex; - - autoneg = (ecmd->autoneg == AUTONEG_ENABLE); - speed100 = (ecmd->speed == SPEED_100); - full_duplex = (ecmd->duplex == DUPLEX_FULL); - - tp->autoneg = autoneg; - if (speed100 != tp->speed100 || - full_duplex != tp->full_duplex) { - tp->speed100 = speed100; - tp->full_duplex = full_duplex; - /* change advertising bits */ - tp->advertising[0] &= ~(ADVERTISE_10HALF | - ADVERTISE_10FULL | - ADVERTISE_100HALF | - ADVERTISE_100FULL | - ADVERTISE_100BASE4); - if (speed100) { - if (full_duplex) - tp->advertising[0] |= ADVERTISE_100FULL; - else - tp->advertising[0] |= ADVERTISE_100HALF; - } else { - if (full_duplex) - tp->advertising[0] |= ADVERTISE_10FULL; - else - tp->advertising[0] |= ADVERTISE_10HALF; - } - } - check_duplex(dev); - return 0; -} - -static void xircom_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct xircom_private *tp = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(tp->pdev)); -} - -static const struct ethtool_ops ops = { - .get_settings = xircom_get_settings, - .set_settings = xircom_set_settings, - .get_drvinfo = xircom_get_drvinfo, -}; - -/* Provide ioctl() calls to examine the MII xcvr state. */ -static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 *data = (u16 *)&rq->ifr_ifru; - int phy = tp->phys[0] & 0x1f; - unsigned long flags; - - switch(cmd) { - /* Legacy mii-diag interface */ - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - if (tp->mii_cnt) - data[0] = phy; - else - return -ENODEV; - return 0; - case SIOCGMIIREG: /* Read MII PHY register. */ - save_flags(flags); - cli(); - data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f); - restore_flags(flags); - return 0; - case SIOCSMIIREG: /* Write MII PHY register. */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - save_flags(flags); - cli(); - if (data[0] == tp->phys[0]) { - u16 value = data[2]; - switch (data[1]) { - case 0: - if (value & (BMCR_RESET | BMCR_ANENABLE)) - /* Autonegotiation. */ - tp->autoneg = 1; - else { - tp->full_duplex = (value & BMCR_FULLDPLX) ? 1 : 0; - tp->autoneg = 0; - } - break; - case 4: - tp->advertising[0] = value; - break; - } - check_duplex(dev); - } - mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]); - restore_flags(flags); - return 0; - default: - return -EOPNOTSUPP; - } - - return -EOPNOTSUPP; -} - -/* Set or clear the multicast filter for this adaptor. - Note that we only use exclusion around actually queueing the - new frame, not around filling tp->setup_frame. This is non-deterministic - when re-entered but still correct. */ -static void set_rx_mode(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - struct dev_mc_list *mclist; - long ioaddr = dev->base_addr; - int csr6 = inl(ioaddr + CSR6); - u16 *eaddrs, *setup_frm; - u32 tx_flags; - int i; - - tp->csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit); - csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit); - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - tp->csr6 |= PromiscBit; - csr6 |= PromiscBit; - goto out; - } - - if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter well -- accept all multicasts. */ - tp->csr6 |= AllMultiBit; - csr6 |= AllMultiBit; - goto out; - } - - tx_flags = Tx1WholePkt | Tx1SetupPkt | PKT_SETUP_SZ; - - /* Note that only the low-address shortword of setup_frame is valid! */ - setup_frm = tp->setup_frame; - mclist = dev->mc_list; - - /* Fill the first entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2; - - if (dev->mc_count > 14) { /* Must use a multicast hash table. */ - u32 *hash_table = (u32 *)(tp->setup_frame + 4 * 12); - u32 hash, hash2; - - tx_flags |= Tx1HashSetup; - tp->csr6 |= HashFilterBit; - csr6 |= HashFilterBit; - - /* Fill the unused 3 entries with the broadcast address. - At least one entry *must* contain the broadcast address!!!*/ - for (i = 0; i < 3; i++) { - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - } - - /* Truly brain-damaged hash filter layout */ - /* XXX: not sure if I should take the last or the first 9 bits */ - for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) { - u32 *hptr; - hash = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x1ff; - if (hash < 384) { - hash2 = hash + ((hash >> 4) << 4) + - ((hash >> 5) << 5); - } else { - hash -= 384; - hash2 = 64 + hash + (hash >> 4) * 80; - } - hptr = &hash_table[hash2 & ~0x1f]; - *hptr |= cpu_to_le32(1 << (hash2 & 0x1f)); - } - } else { - /* We have <= 14 mcast addresses so we can use Xircom's - wonderful 16-address perfect filter. */ - for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) { - eaddrs = (u16 *)mclist->dmi_addr; - *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2; - } - /* Fill the unused entries with the broadcast address. - At least one entry *must* contain the broadcast address!!!*/ - for (; i < 15; i++) { - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - } - } - - /* Now add this frame to the Tx list. */ - if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) { - /* Same setup recently queued, we need not add it. */ - /* XXX: Huh? All it means is that the Tx list is full...*/ - } else { - unsigned long flags; - unsigned int entry; - int dummy = -1; - - save_flags(flags); cli(); - entry = tp->cur_tx++ % TX_RING_SIZE; - - if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. */ - tp->tx_skbuff[entry] = NULL; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE - 1) ? Tx1RingWrap : 0; - tp->tx_ring[entry].buffer1 = 0; - /* race with chip, set Tx0DescOwned later */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } - - tp->tx_skbuff[entry] = NULL; - /* Put the setup frame on the Tx list. */ - if (entry == TX_RING_SIZE - 1) - tx_flags |= Tx1RingWrap; /* Wrap ring. */ - tp->tx_ring[entry].length = tx_flags; - tp->tx_ring[entry].buffer1 = virt_to_bus(tp->setup_frame); - tp->tx_ring[entry].status = Tx0DescOwned; - if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) { - tp->tx_full = 1; - netif_stop_queue (dev); - } - if (dummy >= 0) - tp->tx_ring[dummy].status = Tx0DescOwned; - restore_flags(flags); - /* Trigger an immediate transmit demand. */ - outl(0, ioaddr + CSR1); - } - -out: - outl_CSR6(csr6, ioaddr); -} - - -static struct pci_device_id xircom_pci_table[] = { - { 0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, X3201_3 }, - {0}, -}; -MODULE_DEVICE_TABLE(pci, xircom_pci_table); - - -#ifdef CONFIG_PM -static int xircom_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xircom_private *tp = netdev_priv(dev); - printk(KERN_INFO "xircom_suspend(%s)\n", dev->name); - if (tp->open) - xircom_down(dev); - - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, 3); - - return 0; -} - - -static int xircom_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xircom_private *tp = netdev_priv(dev); - printk(KERN_INFO "xircom_resume(%s)\n", dev->name); - - pci_set_power_state(pdev,0); - pci_enable_device(pdev); - pci_restore_state(pdev); - - /* Bring the chip out of sleep mode. - Caution: Snooze mode does not work with some boards! */ - if (xircom_tbl[tp->chip_id].flags & HAS_ACPI) - pci_write_config_dword(tp->pdev, PCI_POWERMGMT, 0); - - transceiver_voodoo(dev); - if (xircom_tbl[tp->chip_id].flags & HAS_MII) - check_duplex(dev); - - if (tp->open) - xircom_up(dev); - return 0; -} -#endif /* CONFIG_PM */ - - -static void __devexit xircom_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - printk(KERN_INFO "xircom_remove_one(%s)\n", dev->name); - unregister_netdev(dev); - pci_release_regions(pdev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); -} - - -static struct pci_driver xircom_driver = { - .name = DRV_NAME, - .id_table = xircom_pci_table, - .probe = xircom_init_one, - .remove = __devexit_p(xircom_remove_one), -#ifdef CONFIG_PM - .suspend = xircom_suspend, - .resume = xircom_resume -#endif /* CONFIG_PM */ -}; - - -static int __init xircom_init(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - return pci_register_driver(&xircom_driver); -} - - -static void __exit xircom_exit(void) -{ - pci_unregister_driver(&xircom_driver); -} - -module_init(xircom_init) -module_exit(xircom_exit) - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */