diff --git a/MAINTAINERS b/MAINTAINERS index e9caa4b28828..3c9d0d0ba0e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1931,7 +1931,7 @@ S: Supported F: drivers/i2c/busses/i2c-at91.c ATMEL ISI DRIVER -M: Josh Wu +M: Ludovic Desroches L: linux-media@vger.kernel.org S: Supported F: drivers/media/platform/soc_camera/atmel-isi.c @@ -1950,7 +1950,8 @@ S: Supported F: drivers/net/ethernet/cadence/ ATMEL NAND DRIVER -M: Josh Wu +M: Wenyou Yang +M: Josh Wu L: linux-mtd@lists.infradead.org S: Supported F: drivers/mtd/nand/atmel_nand* diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 4e0ad3b82796..0962f2fa3f6e 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -155,21 +155,21 @@ label = "keyswitch_in"; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; error_in { label = "error_in"; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; - gpio-key,wakeup; + wakeup-source; }; btn { label = "btn"; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index f89598af4c2b..6bf873e7d96c 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -159,7 +159,7 @@ label = "Button"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index bf18ece0c027..229e989eb60d 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - main_xtal { clock-frequency = <18432000>; }; @@ -94,14 +85,14 @@ label = "PB_RST"; gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index f0b1563cb3f1..50a14568f094 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -171,21 +171,21 @@ label = "PB_PROG"; gpios = <&pioE 27 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9f72b4932634..9682d105d4d8 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -98,14 +98,14 @@ label = "PB_PROG"; gpios = <&pioC 17 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioC 16 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index a9aef53ab764..4f2eebf4a560 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -183,7 +183,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e07c2b206beb..ad6de73ed5a5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include / { model = "Atmel SAMA5D2 Xplained"; @@ -59,15 +60,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -91,6 +83,22 @@ status = "okay"; }; + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; /* conflict with qspi0 */ + }; + apb { spi0: spi@f8000000 { pinctrl-names = "default"; @@ -181,12 +189,49 @@ }; }; + flx0: flexcom@f8034000 { + atmel,flexcom-mode = ; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx0_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + status = "okay"; + }; + }; + uart3: serial@fc008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; + flx4: flexcom@fc018000 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; + }; + i2c1: i2c@fc028000 { dmas = <0>, <0>; pinctrl-names = "default"; @@ -201,6 +246,18 @@ }; pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = , + ; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = , ; @@ -227,6 +284,46 @@ bias-disable; }; + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = , + , + , + , + , + , + , + , + ; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = , + , + , + ; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = , + , + , + , + ; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + pinctrl_spi0_default: spi0_default { pinmux = , , diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 8488ac53d22d..ff888d21c786 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -315,7 +315,7 @@ label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 45371a1b61b3..131614f28e75 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -59,15 +58,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -235,7 +225,7 @@ label = "pb_user1"; gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 6d272c0125e3..2d4a33100af6 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -59,15 +58,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -304,7 +294,7 @@ label = "pb_user1"; gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8dab4b75ca97..f90e1c2d3caa 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2e92ac020f23..55bd51f07fa6 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -149,7 +140,7 @@ ti,debounce-tol = /bits/ 16 <65535>; ti,debounce-max = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -193,28 +184,28 @@ label = "button_0"; gpios = <&pioA 27 GPIO_ACTIVE_LOW>; linux,code = <256>; - gpio-key,wakeup; + wakeup-source; }; button_1 { label = "button_1"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <257>; - gpio-key,wakeup; + wakeup-source; }; button_2 { label = "button_2"; gpios = <&pioA 25 GPIO_ACTIVE_LOW>; linux,code = <258>; - gpio-key,wakeup; + wakeup-source; }; button_3 { label = "button_3"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <259>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 23381276ffb8..59df9d73d276 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16367660>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -213,14 +204,14 @@ label = "left_click"; gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 57548a2c5a1e..e9cc99b6353a 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -19,15 +19,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -206,14 +197,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9d16ef8453c5..2400c99134f7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -323,14 +314,14 @@ label = "left_click"; gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index acf3451a332d..ca4ddf86817a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -23,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -219,7 +210,7 @@ label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 558c9f220bed..f10566f759cd 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -225,14 +216,14 @@ label = "right_click"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left_click { label = "left_click"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 26112ebd15fc..b098ad8cd93a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -12,17 +12,6 @@ reg = <0x20000000 0x8000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - }; - clocks { slow_xtal { clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index d9a9aca1ccfd..e812f5c1bf70 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -49,7 +49,7 @@ label = "pb_user1"; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 15bbaf690047..2193637b9cd2 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1300,7 +1300,7 @@ }; watchdog@fc068640 { - compatible = "atmel,at91sam9260-wdt"; + compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; clocks = <&clk32k>; status = "disabled"; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 12edafefd44a..9beea8976584 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -115,7 +115,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 68c0de36c339..8cc6edb29694 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -143,7 +143,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1b1e5acd76e2..e4b1be66b3f5 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -125,7 +125,6 @@ CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_SSB=m CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index a0c57ac88b27..63f7e6ce649a 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -129,7 +129,6 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y # CONFIG_HWMON is not set -CONFIG_SSB=m CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y