Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest

Conflicts: arch/sh/kernel/cpu/sh2a/clock-sh7201.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06 18:24:07 +09:00 · 2011-01-06 18:24:07 +09:00 · f862f904d3
parent 6f09e41d70 3c0eee3fe6
commit f862f904d3
668 changed files with 6521 additions and 4692 deletions
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@ -516,6 +516,7 @@ int main(int argc, char *argv[])
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
+			case TASKSTATS_TYPE_NULL:
 				break;
 			}
 			na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@ -18,7 +18,6 @@ prototypes:
 	char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen);

 locking rules:
-	none have BKL
 		dcache_lock	rename_lock	->d_lock	may block
 d_revalidate:	no		no		no		yes
 d_hash		no		no		no		yes
@ -42,18 +41,23 @@ ata *);
 	int (*rename) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *);
 	int (*readlink) (struct dentry *, char __user *,int);
-	int (*follow_link) (struct dentry *, struct nameidata *);
+	void * (*follow_link) (struct dentry *, struct nameidata *);
+	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
 	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*check_acl)(struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
 	ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
 	ssize_t (*listxattr) (struct dentry *, char *, size_t);
 	int (*removexattr) (struct dentry *, const char *);
+	void (*truncate_range)(struct inode *, loff_t, loff_t);
+	long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len);
+	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);

 locking rules:
-	all may block, none have BKL
+	all may block
 		i_mutex(inode)
 lookup:		yes
 create:		yes
@ -66,19 +70,24 @@ rmdir:		yes (both)	(see below)
 rename:		yes (all)	(see below)
 readlink:	no
 follow_link:	no
+put_link:	no
 truncate:	yes		(see below)
 setattr:	yes
 permission:	no
+check_acl:	no
 getattr:	no
 setxattr:	yes
 getxattr:	no
 listxattr:	no
 removexattr:	yes
+truncate_range:	yes
+fallocate:	no
+fiemap:		no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
 victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
 	->truncate() is never called directly - it's a callback, not a
-method. It's called by vmtruncate() - library function normally used by
+method. It's called by vmtruncate() - deprecated library function used by
 ->setattr(). Locking information above applies to that call (i.e. is
 inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been
 passed).
@ -91,7 +100,7 @@ prototypes:
 	struct inode *(*alloc_inode)(struct super_block *sb);
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
-	int (*write_inode) (struct inode *, int);
+	int (*write_inode) (struct inode *, struct writeback_control *wbc);
 	int (*drop_inode) (struct inode *);
 	void (*evict_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
@ -105,10 +114,10 @@ prototypes:
 	int (*show_options)(struct seq_file *, struct vfsmount *);
 	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);

 locking rules:
 	All may block [not true, see below]
-	None have BKL
 			s_umount
 alloc_inode:
 destroy_inode:
@ -127,6 +136,7 @@ umount_begin:		no
 show_options:		no		(namespace_sem)
 quota_read:		no		(see below)
 quota_write:		no		(see below)
+bdev_try_to_free_page:	no		(see below)

 ->statfs() has s_umount (shared) when called by ustat(2) (native or
 compat), but that's an accident of bad API; s_umount is used to pin
@ -139,19 +149,25 @@ be the only ones operating on the quota file by the quota code (via
 dqio_sem) (unless an admin really wants to screw up something and
 writes to quota files with quotas on). For other details about locking
 see also dquot_operations section.
+->bdev_try_to_free_page is called from the ->releasepage handler of
+the block device inode.  See there for more details.

 --------------------------- file_system_type ---------------------------
 prototypes:
 	int (*get_sb) (struct file_system_type *, int,
 		       const char *, void *, struct vfsmount *);
+	struct dentry *(*mount) (struct file_system_type *, int,
+		       const char *, void *);
 	void (*kill_sb) (struct super_block *);
 locking rules:
-		may block	BKL
-get_sb		yes		no
-kill_sb		yes		no
+		may block
+get_sb		yes
+mount		yes
+kill_sb		yes

 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
+->mount() returns ERR_PTR or the root dentry.
 ->kill_sb() takes a write-locked superblock, does all shutdown work on it,
 unlocks and drops the reference.

@ -173,28 +189,38 @@ prototypes:
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
-	int (*launder_page) (struct page *);
+	int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
+				unsigned long *);
+	int (*migratepage)(struct address_space *, struct page *, struct page *);
+	int (*launder_page)(struct page *);
+	int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long);
+	int (*error_remove_page)(struct address_space *, struct page *);

 locking rules:
-	All except set_page_dirty may block
+	All except set_page_dirty and freepage may block

-			BKL	PageLocked(page)	i_mutex
-writepage:		no	yes, unlocks (see below)
-readpage:		no	yes, unlocks
-sync_page:		no	maybe
-writepages:		no
-set_page_dirty		no	no
-readpages:		no
-write_begin:		no	locks the page		yes
-write_end:		no	yes, unlocks		yes
-perform_write:		no	n/a			yes
-bmap:			no
-invalidatepage:		no	yes
-releasepage:		no	yes
-direct_IO:		no
-launder_page:		no	yes
+			PageLocked(page)	i_mutex
+writepage:		yes, unlocks (see below)
+readpage:		yes, unlocks
+sync_page:		maybe
+writepages:
+set_page_dirty		no
+readpages:
+write_begin:		locks the page		yes
+write_end:		yes, unlocks		yes
+bmap:
+invalidatepage:		yes
+releasepage:		yes
+freepage:		yes
+direct_IO:
+get_xip_mem:					maybe
+migratepage:		yes (both)
+launder_page:		yes
+is_partially_uptodate:	yes
+error_remove_page:	yes

 	->write_begin(), ->write_end(), ->sync_page() and ->readpage()
 may be called from the request handler (/dev/loop).
@ -274,9 +300,8 @@ under spinlock (it cannot block) and is sometimes called with the page
 not locked.

 	->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
-filesystems and by the swapper. The latter will eventually go away. All
-instances do not actually need the BKL. Please, keep it that way and don't
-breed new callers.
+filesystems and by the swapper. The latter will eventually go away.  Please,
+keep it that way and don't breed new callers.

 	->invalidatepage() is called when the filesystem must attempt to drop
 some or all of the buffers from the page when it is being truncated.  It
@ -288,53 +313,46 @@ buffers from the page in preparation for freeing it.  It returns zero to
 indicate that the buffers are (or may be) freeable.  If ->releasepage is zero,
 the kernel assumes that the fs has no private interest in the buffers.

+	->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
 	->launder_page() may be called prior to releasing a page if
 it is still found to be dirty. It returns zero if the page was successfully
 cleaned, or an error value if not. Note that in order to prevent the page
 getting mapped back in and redirtied, it needs to be kept locked
 across the entire operation.

-	Note: currently almost all instances of address_space methods are
-using BKL for internal serialization and that's one of the worst sources
-of contention. Normally they are calling library functions (in fs/buffer.c)
-and pass foo_get_block() as a callback (on local block-based filesystems,
-indeed). BKL is not needed for library stuff and is usually taken by
-foo_get_block(). It's an overkill, since block bitmaps can be protected by
-internal fs locking and real critical areas are much smaller than the areas
-filesystems protect now.
-
 ----------------------- file_lock_operations ------------------------------
 prototypes:
-	void (*fl_insert)(struct file_lock *);	/* lock insertion callback */
-	void (*fl_remove)(struct file_lock *);	/* lock removal callback */
 	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
 	void (*fl_release_private)(struct file_lock *);


 locking rules:
-			BKL	may block
-fl_insert:		yes	no
-fl_remove:		yes	no
-fl_copy_lock:		yes	no
-fl_release_private:	yes	yes
+			file_lock_lock	may block
+fl_copy_lock:		yes		no
+fl_release_private:	maybe		no

 ----------------------- lock_manager_operations ---------------------------
 prototypes:
 	int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
 	void (*fl_notify)(struct file_lock *);  /* unblock callback */
+	int (*fl_grant)(struct file_lock *, struct file_lock *, int);
 	void (*fl_release_private)(struct file_lock *);
 	void (*fl_break)(struct file_lock *); /* break_lease callback */
+	int (*fl_mylease)(struct file_lock *, struct file_lock *);
+	int (*fl_change)(struct file_lock **, int);

 locking rules:
-			BKL	may block
-fl_compare_owner:	yes	no
-fl_notify:		yes	no
-fl_release_private:	yes	yes
-fl_break:		yes	no
+			file_lock_lock	may block
+fl_compare_owner:	yes		no
+fl_notify:		yes		no
+fl_grant:		no		no
+fl_release_private:	maybe		no
+fl_break:		yes		no
+fl_mylease:		yes		no
+fl_change		yes		no

-	Currently only NFSD and NLM provide instances of this class. None of the
-them block. If you have out-of-tree instances - please, show up. Locking
-in that area will change.
 --------------------------- buffer_head -----------------------------------
 prototypes:
 	void (*b_end_io)(struct buffer_head *bh, int uptodate);
@ -359,17 +377,17 @@ prototypes:
 	void (*swap_slot_free_notify) (struct block_device *, unsigned long);

 locking rules:
-			BKL	bd_mutex
-open:			no	yes
-release:		no	yes
-ioctl:			no	no
-compat_ioctl:		no	no
-direct_access:		no	no
-media_changed:		no	no
-unlock_native_capacity:	no	no
-revalidate_disk:	no	no
-getgeo:			no	no
-swap_slot_free_notify:	no	no	(see below)
+			bd_mutex
+open:			yes
+release:		yes
+ioctl:			no
+compat_ioctl:		no
+direct_access:		no
+media_changed:		no
+unlock_native_capacity:	no
+revalidate_disk:	no
+getgeo:			no
+swap_slot_free_notify:	no	(see below)

 media_changed, unlock_native_capacity and revalidate_disk are called only from
 check_disk_change().
@ -408,34 +426,21 @@ prototypes:
 	unsigned long (*get_unmapped_area)(struct file *, unsigned long,
 			unsigned long, unsigned long, unsigned long);
 	int (*check_flags)(int);
+	int (*flock) (struct file *, int, struct file_lock *);
+	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *,
+			size_t, unsigned int);
+	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *,
+			size_t, unsigned int);
+	int (*setlease)(struct file *, long, struct file_lock **);
 };

 locking rules:
-	All may block.
-			BKL
-llseek:			no	(see below)
-read:			no
-aio_read:		no
-write:			no
-aio_write:		no
-readdir: 		no
-poll:			no
-unlocked_ioctl:		no
-compat_ioctl:		no
-mmap:			no
-open:			no
-flush:			no
-release:		no
-fsync:			no	(see below)
-aio_fsync:		no
-fasync:			no
-lock:			yes
-readv:			no
-writev:			no
-sendfile:		no
-sendpage:		no
-get_unmapped_area:	no
-check_flags:		no
+	All may block except for ->setlease.
+	No VFS locks held on entry except for ->fsync and ->setlease.
+
+->fsync() has i_mutex on inode.
+
+->setlease has the file_list_lock held and must not sleep.

 ->llseek() locking has moved from llseek to the individual llseek
 implementations.  If your fs is not using generic_file_llseek, you
@ -445,17 +450,10 @@ mutex or just to use i_size_read() instead.
 Note: this does not protect the file->f_pos against concurrent modifications
 since this is something the userspace has to take care about.

-Note: ext2_release() was *the* source of contention on fs-intensive
-loads and dropping BKL on ->release() helps to get rid of that (we still
-grab BKL for cases when we close a file that had been opened r/w, but that
-can and should be done using the internal locking with smaller critical areas).
-Current worst offender is ext2_get_block()...
-
->fasync() is called without BKL protection, and is responsible for
-maintaining the FASYNC bit in filp->f_flags.  Most instances call
-fasync_helper(), which does that maintenance, so it's not normally
-something one needs to worry about.  Return values > 0 will be mapped to
-zero in the VFS layer.
+->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags.
+Most instances call fasync_helper(), which does that maintenance, so it's
+not normally something one needs to worry about.  Return values > 0 will be
+mapped to zero in the VFS layer.

 ->readdir() and ->ioctl() on directories must be changed. Ideally we would
 move ->readdir() to inode_operations and use a separate method for directory
@ -466,8 +464,6 @@ components. And there are other reasons why the current interface is a mess...
 ->read on directories probably must go away - we should just enforce -EISDIR
 in sys_read() and friends.

->fsync() has i_mutex on inode.
-
 --------------------------- dquot_operations -------------------------------
 prototypes:
 	int (*write_dquot) (struct dquot *);
@ -502,12 +498,12 @@ prototypes:
 	int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);

 locking rules:
-		BKL	mmap_sem	PageLocked(page)
-open:		no	yes
-close:		no	yes
-fault:		no	yes		can return with page locked
-page_mkwrite:	no	yes		can return with page locked
-access:		no	yes
+		mmap_sem	PageLocked(page)
+open:		yes
+close:		yes
+fault:		yes		can return with page locked
+page_mkwrite:	yes		can return with page locked
+access:		yes

 	->fault() is called when a previously not present pte is about
 to be faulted in. The filesystem must find and return the page associated
@ -534,6 +530,3 @@ VM_IO | VM_PFNMAP VMAs.

 (if you break something or notice that it is broken and do not fix it yourself
 - at least put it here)
-
-ipc/shm.c::shm_delete() - may need BKL.
->read() and ->write() in many drivers are (probably) missing BKL.
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@ -534,6 +534,7 @@ struct address_space_operations {
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
@ -678,6 +679,12 @@ struct address_space_operations {
        need to ensure this.  Possibly it can clear the PageUptodate
        bit if it cannot free private data yet.

+  freepage: freepage is called once the page is no longer visible in
+        the page cache in order to allow the cleanup of any private
+	data. Since it may be called by the memory reclaimer, it
+	should not assume that the original address_space mapping still
+	exists, and it should not block.
+
  direct_IO: called by the generic read/write routines to perform
        direct_IO - that is IO requests which bypass the page cache
        and transfer data directly between the storage and the
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -1759,7 +1759,7 @@ and is between 256 and 4096 characters. It is defined in the file

 	nousb		[USB] Disable the USB subsystem

-	nowatchdog	[KNL] Disable the lockup detector.
+	nowatchdog	[KNL] Disable the lockup detector (NMI watchdog).

 	nowb		[ARM]

@ -2175,11 +2175,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.

-	resource_alloc_from_bottom
-			Allocate new resources from the beginning of available
-			space, not the end.  If you need to use this, please
-			report a bug.
-
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend

--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
      zero)

  bool pm_runtime_suspended(struct device *dev);
-    - return true if the device's runtime PM status is 'suspended', or false
-      otherwise
+    - return true if the device's runtime PM status is 'suspended' and its
+      'power.disable_depth' field is equal to zero, or false otherwise

  void pm_runtime_allow(struct device *dev);
    - set the power.runtime_auto flag for the device and decrease its usage
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@ -1044,9 +1044,9 @@ Details:


 /**
- *      queuecommand - queue scsi command, invoke 'done' on completion
+ *      queuecommand - queue scsi command, invoke scp->scsi_done on completion
+ *      @shost: pointer to the scsi host object
 *      @scp: pointer to scsi command object
- *      @done: function pointer to be invoked on completion
 *
 *      Returns 0 on success.
 *
@ -1074,42 +1074,45 @@ Details:
 *
 *      Other types of errors that are detected immediately may be
 *      flagged by setting scp->result to an appropriate value,
- *      invoking the 'done' callback, and then returning 0 from this
- *      function. If the command is not performed immediately (and the
- *      LLD is starting (or will start) the given command) then this
- *      function should place 0 in scp->result and return 0.
+ *      invoking the scp->scsi_done callback, and then returning 0
+ *      from this function. If the command is not performed
+ *      immediately (and the LLD is starting (or will start) the given
+ *      command) then this function should place 0 in scp->result and
+ *      return 0.
 *
 *      Command ownership.  If the driver returns zero, it owns the
- *      command and must take responsibility for ensuring the 'done'
- *      callback is executed.  Note: the driver may call done before
- *      returning zero, but after it has called done, it may not
- *      return any value other than zero.  If the driver makes a
- *      non-zero return, it must not execute the command's done
- *      callback at any time.
+ *      command and must take responsibility for ensuring the
+ *      scp->scsi_done callback is executed.  Note: the driver may
+ *      call scp->scsi_done before returning zero, but after it has
+ *      called scp->scsi_done, it may not return any value other than
+ *      zero.  If the driver makes a non-zero return, it must not
+ *      execute the command's scsi_done callback at any time.
 *
- *      Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
- *             and is expected to be held on return.
+ *      Locks: up to and including 2.6.36, struct Scsi_Host::host_lock
+ *             held on entry (with "irqsave") and is expected to be
+ *             held on return. From 2.6.37 onwards, queuecommand is
+ *             called without any locks held.
 *
 *      Calling context: in interrupt (soft irq) or process context
 *
- *      Notes: This function should be relatively fast. Normally it will
- *      not wait for IO to complete. Hence the 'done' callback is invoked 
- *      (often directly from an interrupt service routine) some time after
- *      this function has returned. In some cases (e.g. pseudo adapter 
- *      drivers that manufacture the response to a SCSI INQUIRY)
- *      the 'done' callback may be invoked before this function returns.
- *      If the 'done' callback is not invoked within a certain period
- *      the SCSI mid level will commence error processing.
- *      If a status of CHECK CONDITION is placed in "result" when the
- *      'done' callback is invoked, then the LLD driver should 
- *      perform autosense and fill in the struct scsi_cmnd::sense_buffer
+ *      Notes: This function should be relatively fast. Normally it
+ *      will not wait for IO to complete. Hence the scp->scsi_done
+ *      callback is invoked (often directly from an interrupt service
+ *      routine) some time after this function has returned. In some
+ *      cases (e.g. pseudo adapter drivers that manufacture the
+ *      response to a SCSI INQUIRY) the scp->scsi_done callback may be
+ *      invoked before this function returns.  If the scp->scsi_done
+ *      callback is not invoked within a certain period the SCSI mid
+ *      level will commence error processing.  If a status of CHECK
+ *      CONDITION is placed in "result" when the scp->scsi_done
+ *      callback is invoked, then the LLD driver should perform
+ *      autosense and fill in the struct scsi_cmnd::sense_buffer
 *      array. The scsi_cmnd::sense_buffer array is zeroed prior to
 *      the mid level queuing a command to an LLD.
 *
 *      Defined in: LLD
 **/
-    int queuecommand(struct scsi_cmnd * scp, 
-                     void (*done)(struct scsi_cmnd *))
+    int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp)


 /**
--- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@ -373,9 +373,18 @@ EVENT_PROCESS:
 				print "         $regex_lru_isolate/o\n";
 				next;
 			}
+			my $isolate_mode = $1;
 			my $nr_scanned = $4;
 			my $nr_contig_dirty = $7;
-			$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+
+			# To closer match vmstat scanning statistics, only count isolate_both
+			# and isolate_inactive as scanning. isolate_active is rotation
+			# isolate_inactive == 0
+			# isolate_active   == 1
+			# isolate_both     == 2
+			if ($isolate_mode != 1) {
+				$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+			}
 			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
 		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
 			$details = $5;
--- a/37
+++ b/37
@ -405,7 +405,7 @@ S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*

 AMD GEODE PROCESSOR/CHIPSET SUPPORT
-P:	Jordan Crouse
+P:	Andres Salomon <dilinger@queued.net>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
@ -559,14 +559,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained

 ARM/BCMRING ARM ARCHITECTURE
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-bcmring

 ARM/BCMRING MTD NAND DRIVER
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@ -792,11 +792,14 @@ S:	Maintained

 ARM/NOMADIK ARCHITECTURE
 M:	Alessandro Rubini <rubini@unipv.it>
+M:	Linus Walleij <linus.walleij@stericsson.com>
 M:	STEricsson <STEricsson_nomadik_linux@list.st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/plat-nomadik/
+F:	drivers/i2c/busses/i2c-nomadik.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git

 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 M:	Nelson Castillo <arhuaco@freaks-unidos.net>
@ -815,7 +818,7 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/serial/msm_serial.h
 F:	drivers/serial/msm_serial.c
-T:	git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
 S:	Maintained

 ARM/TOSA MACHINE SUPPORT
@ -998,12 +1001,24 @@ F:	drivers/i2c/busses/i2c-stu300.c
 F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/watchdog/coh901327_wdt.c
 F:	drivers/dma/coh901318*
+F:	drivers/mfd/ab3100*
+F:	drivers/rtc/rtc-ab3100.c
+F:	drivers/rtc/rtc-coh901331.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git

-ARM/U8500 ARM ARCHITECTURE
+ARM/Ux500 ARM ARCHITECTURE
 M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+M:	Linus Walleij <linus.walleij@stericsson.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ux500/
+F:	drivers/dma/ste_dma40*
+F:	drivers/mfd/ab3550*
+F:	drivers/mfd/abx500*
+F:	drivers/mfd/ab8500*
+F:	drivers/mfd/stmpe*
+F:	drivers/rtc/rtc-ab8500.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git

 ARM/VFP SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
@ -4590,7 +4605,7 @@ F:	drivers/pcmcia/
 F:	include/pcmcia/

 PCNET32 NETWORK DRIVER
-M:	Don Fry <pcnet32@verizon.net>
+M:	Don Fry <pcnet32@frontier.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
@ -5932,7 +5947,6 @@ F:	include/linux/tty.h

 TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
@ -6584,6 +6598,15 @@ F:	include/linux/mfd/wm8400*
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*

+WORKQUEUE
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S:	Maintained
+F:	include/linux/workqueue.h
+F:	kernel/workqueue.c
+F:	Documentation/workqueue.txt
+
 X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
 L:	linux-x25@vger.kernel.org
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs

 # *DOCUMENTATION*
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -1311,7 +1311,7 @@ config HZ

 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"

 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(nr, &it8152_ops, sys);
 }

+EXPORT_SYMBOL(dma_set_coherent_mask);
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@ -76,6 +76,7 @@ extern unsigned long it8152_base_address;
  IT8152_PD_IRQ(0)  Audio controller (ACR)
 */
 #define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
+#define IT8152_LAST_IRQ	(IRQ_BOARD_START + 40)

 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
 #define IT8152_LD_IRQ_COUNT     9
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@ -25,9 +25,6 @@ extern void *kmap_high(struct page *page);
 extern void *kmap_high_get(struct page *page);
 extern void kunmap_high(struct page *page);

-extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
-extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
-
 /*
 * The following functions are already defined by <linux/highmem.h>
 * when CONFIG_HIGHMEM is not set.
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@ -13,9 +13,6 @@
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
 /*  Size definitions
 *  Copyright (C) ARM Limited 1998. All rights reserved.
 */
@ -25,6 +22,9 @@

 /* handy sizes */
 #define SZ_16				0x00000010
+#define SZ_32				0x00000020
+#define SZ_64				0x00000040
+#define SZ_128				0x00000080
 #define SZ_256				0x00000100
 #define SZ_512				0x00000200

--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@ -150,6 +150,7 @@ extern unsigned int user_debug;
 #define rmb()		dmb()
 #define wmb()		mb()
 #else
+#include <asm/memory.h>
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@ -29,6 +29,9 @@ ret_fast_syscall:
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
 	bne	fast_work_pending
+#if defined(CONFIG_IRQSOFF_TRACER)
+	asm_trace_hardirqs_on
+#endif

 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
@ -65,6 +68,9 @@ ret_slow_syscall:
 	tst	r1, #_TIF_WORK_MASK
 	bne	work_pending
 no_work_pending:
+#if defined(CONFIG_IRQSOFF_TRACER)
+	asm_trace_hardirqs_on
+#endif
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr

--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@ -310,7 +310,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
-	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o

 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@ -31,6 +31,7 @@

 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>

 #include "sam9_smc.h"
 #include "generic.h"
@ -38,11 +39,7 @@

 static void __init pcontrol_g20_map_io(void)
 {
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
-	at91_register_uart(0, 0, 0);
+	stamp9g20_map_io();

 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)

 	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
 	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }


@ -66,38 +60,6 @@ static void __init init_irq(void)
 }


-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.ncs_read_setup		= 16,
 	.nrd_setup		= 18,
@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.tdf_cycles		= 1,
 } };

-static void __init add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &nand_smc_config);
-	at91_add_device_nand(&nand_data);
-}
-
-
 static void __init add_device_pcontrol(void)
 {
 	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
@ -155,23 +109,6 @@ static void __init add_device_pcontrol(void)
 }


-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-	},
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.wire4		= 1,
-};
-#endif
-
-
 /*
 * USB Host port
 */
@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 };


-/*
- * Dallas 1-Wire  DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	.pin		= AT91_PIN_PA29,
-	.is_open_drain	= 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-
 static void __init pcontrol_g20_board_init(void)
 {
-	at91_add_device_serial();
-	add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
+	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
 	at91_add_device_i2c(pcontrol_g20_i2c_devices,
 		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_wire1();
 	add_device_pcontrol();
 	at91_add_device_spi(pcontrol_g20_spi_devices,
 		ARRAY_SIZE(pcontrol_g20_spi_devices));
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@ -32,7 +32,7 @@
 #include "generic.h"


-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+	stamp9g20_map_io();
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+	stamp9g20_map_io();
+
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
 						| ATMEL_UART_DTR | ATMEL_UART_DSR
@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)

 	/* USART5 on ttyS6. (Rx, Tx only) */
 	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }

 static void __init init_irq(void)
@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };

-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
 	.vbus_pin	= AT91_PIN_PA22,
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
 	}
 };

-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
 	{
 		.name			= "D8",
 		.gpio			= AT91_PIN_PB18,
@ -250,7 +248,7 @@ void add_w1(void)
 }


-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
@ -262,34 +260,40 @@ static void __init generic_board_init(void)
 #else
 	at91_add_device_mmc(0, &mmc_data);
 #endif
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
 	/* W1 */
 	add_w1();
 }

 static void __init portuxg20_board_init(void)
 {
-	generic_board_init();
-	/* SPI */
-	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&portuxg20_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
 	/* LEDs */
 	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
 }

-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
 {
-	generic_board_init();
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
-	at91_add_device_udc(&stamp9g20_udc_data);
+	at91_add_device_udc(&stamp9g20evb_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
-	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+	at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
 }

 MACHINE_START(PORTUXG20, "taskit PortuxG20")
@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20_map_io,
+	.map_io		= stamp9g20evb_map_io,
 	.init_irq	= init_irq,
-	.init_machine	= stamp9g20_board_init,
+	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz = utmi_clk.rate_hz;
 	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }

--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@ -74,6 +74,8 @@
 #define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)

 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
--- a/arch/arm/mach-at91/include/mach/stamp9g20.h
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)

 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
-
+EXPORT_SYMBOL(dma_set_coherent_mask);
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);

 static APMU_CLK(nand, NAND, 0xbf, 100000000);

--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "wl1271",
 		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 		.nonremovable	= true,
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
 		return 0;

 	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
-	if (!dpll3_m2_ck)
+	if (IS_ERR(dpll3_m2_ck))
 		return -EINVAL;

 	rate = clk_get_rate(dpll3_m2_ck);
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }

+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }

-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@ -53,6 +53,19 @@
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>

+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void)
 		goto no_sleep;

 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (try_acquire_console_sem())
-		goto no_sleep;
+	if (!is_suspending())
+		if (try_acquire_console_sem())
+			goto no_sleep;

 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);

-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();

 no_sleep:
 	if (omap2_pm_debug) {
@ -284,6 +299,12 @@ out:
 	local_irq_enable();
 }

+static int omap2_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	return 0;
+}
+
 static int omap2_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
@ -333,10 +354,17 @@ static void omap2_pm_finish(void)
 	enable_hlt();
 }

+static void omap2_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap2_pm_begin,
 	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
 	.finish		= omap2_pm_finish,
+	.end		= omap2_pm_end,
 	.valid		= suspend_valid_only_mem,
 };

--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@ -50,6 +50,19 @@
 #include "sdrc.h"
 #include "control.h"

+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
 #define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
@ -387,10 +400,11 @@ void omap_sram_idle(void)
 	}

 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (per_next_state < PWRDM_POWER_ON ||
-	    core_next_state < PWRDM_POWER_ON)
-		if (try_acquire_console_sem())
-			goto console_still_active;
+	if (!is_suspending())
+		if (per_next_state < PWRDM_POWER_ON ||
+		    core_next_state < PWRDM_POWER_ON)
+			if (try_acquire_console_sem())
+				goto console_still_active;

 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
@ -470,7 +484,8 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}

-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();

 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@ -514,8 +529,6 @@ out:
 }

 #ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@ -243,13 +243,14 @@
 #define OMAP24XX_EN_GPT1_MASK				(1 << 0)

 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK				2
-#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
-#define OMAP24XX_ST_GPT1_MASK				0
+#define OMAP24XX_ST_GPIOS_SHIFT				2
+#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT				0
+#define OMAP24XX_ST_GPT1_MASK				(1 << 0)

 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				0
+#define OMAP2430_ST_MDM_MASK				(1 << 0)


 /* 3430 register bits shared between CM & PRM registers */
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@ -540,6 +540,7 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
+	select FB_W100

 config MACH_E330
 	bool "Toshiba e330"
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
 /******************************************************************************
 * NAND Flash
 ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@ -353,8 +353,8 @@ resume_turn_on_mmu:

 	@ Let us ensure we jump to resume_after_mmu only when the mcr above
 	@ actually took effect.  They call it the "cpwait" operation.
-	mrc	p15, 0, r1, c2, c0, 0		@ queue a dependency on CP15
-	sub	pc, r2, r1, lsr #32		@ jump to virtual addr
+	mrc	p15, 0, r0, c2, c0, 0		@ queue a dependency on CP15
+	sub	pc, r2, r0, lsr #32		@ jump to virtual addr
 	nop
 	nop
 	nop
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@ -28,9 +28,16 @@ config S3C2412_DMA

 config S3C2412_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2412 power management

+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx

 config S3C2412_CPUFREQ
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o

 # Machine support
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@ -27,6 +27,7 @@ config S3C2416_DMA

 config S3C2416_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2416 power management

--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = {
 static struct max8998_platform_data aquila_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(aquila_regulators),
 	.regulators	= aquila_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif

--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = {
 static struct max8998_platform_data goni_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(goni_regulators),
 	.regulators	= goni_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif

--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2010 Magnus Damm
 * Copyright (C) 2008 Renesas Solutions Corp.
 *
 * This program is free software; you can redistribute it and/or modify
@ -14,24 +15,45 @@
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
-#include <mach/hardware.h>
 #include <mach/irqs.h>

+#define INTCA_BASE	0xe6980000
+#define INTFLGA_OFFS	0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS	0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS	0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS	0x00000034 /* previous priority level */
+
 	.macro  disable_fiq
 	.endm

 	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =INTFLGA
+	ldr     \base, =INTCA_BASE
 	.endm

 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm

 	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqnr, [\base]
+	/* The single INTFLGA read access below results in the following:
+	 *
+	 * 1. INTLVLB is updated with old priority value from INTLVLA
+	 * 2. Highest priority interrupt is accepted
+	 * 3. INTLVLA is updated to contain priority of accepted interrupt
+	 * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+	 */
+	ldr     \irqnr, [\base, #INTFLGA_OFFS]
+
+	/* Restore INTLVLA with the value saved in INTLVLB.
+	 * This is required to support interrupt priorities properly.
+	 */
+	ldrb	\tmp, [\base, #INTLVLB_OFFS]
+	strb    \tmp, [\base, #INTLVLA_OFFS]
+
+	/* Handle invalid vector number case */
 	cmp	\irqnr, #0
 	beq	1000f
-	/* intevt to irq number */
+
+	/* Convert vector to irq number, same as the evt2irq() macro */
 	lsr	\irqnr, \irqnr, #0x5
 	subs	\irqnr, \irqnr, #16

--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@ -2,6 +2,6 @@
 #define __ASM_MACH_VMALLOC_H

 /* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL

 #endif /* __ASM_MACH_VMALLOC_H */
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@ -13,13 +13,9 @@
 */

 #include <linux/init.h>
+#include <linux/highmem.h>
 #include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
 #include <plat/cache-feroceon-l2.h>
-#include "mm.h"

 /*
 * Low-level cache maintenance operations.
@ -39,27 +35,30 @@
 * between which we don't want to be preempted.
 */

-static inline unsigned long l2_start_va(unsigned long paddr)
+static inline unsigned long l2_get_va(unsigned long paddr)
 {
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * Let's do our own fixmap stuff in a minimal way here.
 	 * Because range ops can't be done on physical addresses,
 	 * we simply install a virtual mapping for it only for the
 	 * TLB lookup to occur, hence no need to flush the untouched
-	 * memory mapping.  This is protected with the disabling of
-	 * interrupts by the caller.
+	 * memory mapping afterwards (note: a cache flush may happen
+	 * in some circumstances depending on the path taken in kunmap_atomic).
 	 */
-	unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
-	unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
-	local_flush_tlb_kernel_page(vaddr);
-	return vaddr + (paddr & ~PAGE_MASK);
+	void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
+	return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
 #else
 	return __phys_to_virt(paddr);
 #endif
 }

+static inline void l2_put_va(unsigned long vaddr)
+{
+#ifdef CONFIG_HIGHMEM
+	kunmap_atomic((void *)vaddr);
+#endif
+}
+
 static inline void l2_clean_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
@ -76,13 +75,14 @@ static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
 	 */
 	BUG_ON((start ^ end) >> PAGE_SHIFT);

-	raw_local_irq_save(flags);
-	va_start = l2_start_va(start);
+	va_start = l2_get_va(start);
 	va_end = va_start + (end - start);
+	raw_local_irq_save(flags);
 	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
 		"mcr p15, 1, %1, c15, c9, 5"
 		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
+	l2_put_va(va_start);
 }

 static inline void l2_clean_inv_pa(unsigned long addr)
@ -106,13 +106,14 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
 	 */
 	BUG_ON((start ^ end) >> PAGE_SHIFT);

-	raw_local_irq_save(flags);
-	va_start = l2_start_va(start);
+	va_start = l2_get_va(start);
 	va_end = va_start + (end - start);
+	raw_local_irq_save(flags);
 	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
 		"mcr p15, 1, %1, c15, c11, 5"
 		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
+	l2_put_va(va_start);
 }

 static inline void l2_inv_all(void)
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
 *	- end     - virtual end address of region
 */
 v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@ -211,6 +215,10 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrneb	r2, [r1, #-1]			@ read for ownership
+	strneb	r2, [r1, #-1]			@ write for ownership
+#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@ -218,10 +226,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@ -229,6 +233,10 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@ -263,12 +271,12 @@ v6_dma_clean_range:
 *	- end     - virtual end address of region
 */
 ENTRY(v6_dma_flush_range)
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]		@ read for ownership
+	strb	r2, [r0]		@ write for ownership
+#endif
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlob	r2, [r0]			@ read for ownership
+	strlob	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
 UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
-	bic	r0, r0, r3
+	bic	r12, r0, r3
 1:
- USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
-	dsb
- USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
-	add	r0, r0, r2
-2:
-	cmp	r0, r1
+ USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
+	add	r12, r12, r2
+	cmp	r12, r1
 	blo	1b
+	dsb
+	icache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
+2:
+ USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+3:
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
 * isn't mapped, just try the next page.
 */
 9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
+	mov	r12, r12, lsr #12
+	mov	r12, r12, lsl #12
+	add	r12, r12, #4096
+	b	3b
 UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@ -17,14 +17,10 @@
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */
 #include <linux/init.h>
+#include <linux/highmem.h>
 #include <asm/system.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include "mm.h"

 #define CR_L2	(1 << 26)

@ -71,16 +67,15 @@ static inline void xsc3_l2_inv_all(void)
 	dsb();
 }

+static inline void l2_unmap_va(unsigned long va)
+{
 #ifdef CONFIG_HIGHMEM
-#define l2_map_save_flags(x)		raw_local_save_flags(x)
-#define l2_map_restore_flags(x)		raw_local_irq_restore(x)
-#else
-#define l2_map_save_flags(x)		((x) = 0)
-#define l2_map_restore_flags(x)		((void)(x))
+	if (va != -1)
+		kunmap_atomic((void *)va);
 #endif
+}

-static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
-				      unsigned long flags)
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
 {
 #ifdef CONFIG_HIGHMEM
 	unsigned long va = prev_va & PAGE_MASK;
@ -89,17 +84,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
 		/*
 		 * Switching to a new page.  Because cache ops are
 		 * using virtual addresses only, we must put a mapping
-		 * in place for it.  We also enable interrupts for a
-		 * short while and disable them again to protect this
-		 * mapping.
+		 * in place for it.
 		 */
-		unsigned long idx;
-		raw_local_irq_restore(flags);
-		idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
-		va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-		raw_local_irq_restore(flags | PSR_I_BIT);
-		set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
-		local_flush_tlb_kernel_page(va);
+		l2_unmap_va(prev_va);
+		va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
 	}
 	return va + (pa_offset >> (32 - PAGE_SHIFT));
 #else
@ -109,7 +97,7 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,

 static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;

 	if (start == 0 && end == -1ul) {
 		xsc3_l2_inv_all();
@ -117,13 +105,12 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	}

 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);

 	/*
 	 * Clean and invalidate partial first cache line.
 	 */
 	if (start & (CACHE_LINE_SIZE - 1)) {
-		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
@ -133,7 +120,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
 	while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
@ -142,31 +129,30 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	 * Clean and invalidate partial last cache line.
 	 */
 	if (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 	}

-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);

 	dsb();
 }

 static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;

 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);

 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}

-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);

 	dsb();
 }
@ -193,7 +179,7 @@ static inline void xsc3_l2_flush_all(void)

 static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;

 	if (start == 0 && end == -1ul) {
 		xsc3_l2_flush_all();
@ -201,17 +187,16 @@ static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 	}

 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);

 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}

-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);

 	dsb();
 }
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/highmem.h>

 #include <asm/memory.h>
 #include <asm/highmem.h>
@ -480,10 +481,10 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 				op(vaddr, len, dir);
 				kunmap_high(page);
 			} else if (cache_is_vipt()) {
-				pte_t saved_pte;
-				vaddr = kmap_high_l1_vipt(page, &saved_pte);
+				/* unmapped pages might still be cached */
+				vaddr = kmap_atomic(page);
 				op(vaddr + offset, len, dir);
-				kunmap_high_l1_vipt(page, saved_pte);
+				kunmap_atomic(vaddr);
 			}
 		} else {
 			vaddr = page_address(page) + offset;
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
+#include <linux/highmem.h>

 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
@ -180,10 +181,10 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
 			kunmap_high(page);
 		} else if (cache_is_vipt()) {
-			pte_t saved_pte;
-			addr = kmap_high_l1_vipt(page, &saved_pte);
+			/* unmapped pages might still be cached */
+			addr = kmap_atomic(page);
 			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-			kunmap_high_l1_vipt(page, saved_pte);
+			kunmap_atomic(addr);
 		}
 	}

--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@ -140,90 +140,3 @@ struct page *kmap_atomic_to_page(const void *ptr)
 	pte = TOP_PTE(vaddr);
 	return pte_page(*pte);
 }
-
-#ifdef CONFIG_CPU_CACHE_VIPT
-
-#include <linux/percpu.h>
-
-/*
- * The VIVT cache of a highmem page is always flushed before the page
- * is unmapped. Hence unmapped highmem pages need no cache maintenance
- * in that case.
- *
- * However unmapped pages may still be cached with a VIPT cache, and
- * it is not possible to perform cache maintenance on them using physical
- * addresses unfortunately.  So we have no choice but to set up a temporary
- * virtual mapping for that purpose.
- *
- * Yet this VIPT cache maintenance may be triggered from DMA support
- * functions which are possibly called from interrupt context. As we don't
- * want to keep interrupt disabled all the time when such maintenance is
- * taking place, we therefore allow for some reentrancy by preserving and
- * restoring the previous fixmap entry before the interrupted context is
- * resumed.  If the reentrancy depth is 0 then there is no need to restore
- * the previous fixmap, and leaving the current one in place allow it to
- * be reused the next time without a TLB flush (common with DMA).
- */
-
-static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
-
-void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
-{
-	unsigned int idx, cpu;
-	int *depth;
-	unsigned long vaddr, flags;
-	pte_t pte, *ptep;
-
-	if (!in_interrupt())
-		preempt_disable();
-
-	cpu = smp_processor_id();
-	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-
-	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	ptep = TOP_PTE(vaddr);
-	pte = mk_pte(page, kmap_prot);
-
-	raw_local_irq_save(flags);
-	(*depth)++;
-	if (pte_val(*ptep) == pte_val(pte)) {
-		*saved_pte = pte;
-	} else {
-		*saved_pte = *ptep;
-		set_pte_ext(ptep, pte, 0);
-		local_flush_tlb_kernel_page(vaddr);
-	}
-	raw_local_irq_restore(flags);
-
-	return (void *)vaddr;
-}
-
-void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
-{
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-	unsigned long vaddr, flags;
-	pte_t pte, *ptep;
-
-	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	ptep = TOP_PTE(vaddr);
-	pte = mk_pte(page, kmap_prot);
-
-	BUG_ON(pte_val(*ptep) != pte_val(pte));
-	BUG_ON(*depth <= 0);
-
-	raw_local_irq_save(flags);
-	(*depth)--;
-	if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
-		set_pte_ext(ptep, saved_pte, 0);
-		local_flush_tlb_kernel_page(vaddr);
-	}
-	raw_local_irq_restore(flags);
-
-	if (!in_interrupt())
-		preempt_enable();
-}
-
-#endif  /* CONFIG_CPU_CACHE_VIPT */
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@ -61,17 +61,27 @@
 	.endm

 /*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
 */
 	.macro	dcache_line_size, reg, tmp
-	mrc	p15, 1, \tmp, c0, c0, 0		@ read CSIDR
-	and	\tmp, \tmp, #7			@ cache line size encoding
-	mov	\reg, #16			@ size offset
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	lsr	\tmp, \tmp, #16
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm

+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+	.macro	icache_line_size, reg, tmp
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
+	mov	\reg, \reg, lsl \tmp		@ actual cache line size
+	.endm

 /*
 * Sanity check the PTE configuration for the code below - which makes
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/err.h>

 #include <plat/common.h>
 #include <plat/board.h>
@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void)
 			return -ENODEV;

 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (sync_32k_ick)
+		if (!IS_ERR(sync_32k_ick))
 			clk_enable(sync_32k_ick);

 		clocksource_32k.mult = clocksource_hz2mult(32768,
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
 		     cpu_is_omap1710())
 			omap_sram_size = 0x4000;	/* 16K */
 		else if (cpu_is_omap1611())
-			omap_sram_size = 0x3e800;	/* 250K */
+			omap_sram_size = SZ_256K;
 		else {
 			printk(KERN_ERR "Could not detect SRAM size\n");
 			omap_sram_size = 0x4000;
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@ -8,7 +8,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
-	select S3C_DEVICE_NAND
+	select S3C_DEV_NAND
 	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@ -2321,7 +2321,7 @@ mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
 u380			MACH_U380		U380			2333
 oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
 npcmx50			MACH_NPCMX50		NPCMX50			2335
-mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_efikamx		MACH_MX51_EFIKAMX	MX51_EFIKAMX		2336
 mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
 riom			MACH_RIOM		RIOM			2338
 comcas			MACH_COMCAS		COMCAS			2339
@ -2355,7 +2355,7 @@ at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
 csb732			MACH_CSB732		CSB732			2367
 u8500			MACH_U8500		U8500			2368
 huqiu			MACH_HUQIU		HUQIU			2369
-mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+mx51_efikasb		MACH_MX51_EFIKASB	MX51_EFIKASB		2370
 pmt1g			MACH_PMT1G		PMT1G			2371
 htcelf			MACH_HTCELF		HTCELF			2372
 armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
@ -2971,7 +2971,7 @@ premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
 wasabi			MACH_WASABI		WASABI			2986
 vivow			MACH_VIVOW		VIVOW			2987
 mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
-universal		MACH_UNIVERSAL		UNIVERSAL		2989
+universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
 real6410		MACH_REAL6410		REAL6410		2990
 spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
 ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
@ -3044,3 +3044,178 @@ harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
 msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
 spear900		MACH_SPEAR900		SPEAR900		3061
 pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
+rdstor			MACH_RDSTOR		RDSTOR			3063
+usdloader		MACH_USDLOADER		USDLOADER		3064
+tsoploader		MACH_TSOPLOADER		TSOPLOADER		3065
+kronos			MACH_KRONOS		KRONOS			3066
+ffcore			MACH_FFCORE		FFCORE			3067
+mone			MACH_MONE		MONE			3068
+unit2s			MACH_UNIT2S		UNIT2S			3069
+acer_a5			MACH_ACER_A5		ACER_A5			3070
+etherpro_isp		MACH_ETHERPRO_ISP	ETHERPRO_ISP		3071
+stretchs7000		MACH_STRETCHS7000	STRETCHS7000		3072
+p87_smartsim		MACH_P87_SMARTSIM	P87_SMARTSIM		3073
+tulip			MACH_TULIP		TULIP			3074
+sunflower		MACH_SUNFLOWER		SUNFLOWER		3075
+rib			MACH_RIB		RIB			3076
+clod			MACH_CLOD		CLOD			3077
+rump			MACH_RUMP		RUMP			3078
+tenderloin		MACH_TENDERLOIN		TENDERLOIN		3079
+shortloin		MACH_SHORTLOIN		SHORTLOIN		3080
+crespo			MACH_CRESPO		CRESPO			3081
+antares			MACH_ANTARES		ANTARES			3082
+wb40n			MACH_WB40N		WB40N			3083
+herring			MACH_HERRING		HERRING			3084
+naxy400			MACH_NAXY400		NAXY400			3085
+naxy1200		MACH_NAXY1200		NAXY1200		3086
+vpr200			MACH_VPR200		VPR200			3087
+bug20			MACH_BUG20		BUG20			3088
+goflexnet		MACH_GOFLEXNET		GOFLEXNET		3089
+torbreck		MACH_TORBRECK		TORBRECK		3090
+saarb_mg1		MACH_SAARB_MG1		SAARB_MG1		3091
+callisto		MACH_CALLISTO		CALLISTO		3092
+multhsu			MACH_MULTHSU		MULTHSU			3093
+saluda			MACH_SALUDA		SALUDA			3094
+pemp_omap3_apollo	MACH_PEMP_OMAP3_APOLLO	PEMP_OMAP3_APOLLO	3095
+vc0718			MACH_VC0718		VC0718			3096
+mvblx			MACH_MVBLX		MVBLX			3097
+inhand_apeiron		MACH_INHAND_APEIRON	INHAND_APEIRON		3098
+inhand_fury		MACH_INHAND_FURY	INHAND_FURY		3099
+inhand_siren		MACH_INHAND_SIREN	INHAND_SIREN		3100
+hdnvp			MACH_HDNVP		HDNVP			3101
+softwinner		MACH_SOFTWINNER		SOFTWINNER		3102
+prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
+nas6210			MACH_NAS6210		NAS6210			3104
+unisdev			MACH_UNISDEV		UNISDEV			3105
+sbca11			MACH_SBCA11		SBCA11			3106
+saga			MACH_SAGA		SAGA			3107
+ns_k330			MACH_NS_K330		NS_K330			3108
+tanna			MACH_TANNA		TANNA			3109
+imate8502		MACH_IMATE8502		IMATE8502		3110
+aspen			MACH_ASPEN		ASPEN			3111
+daintree_cwac		MACH_DAINTREE_CWAC	DAINTREE_CWAC		3112
+zmx25			MACH_ZMX25		ZMX25			3113
+maple1			MACH_MAPLE1		MAPLE1			3114
+qsd8x72_surf		MACH_QSD8X72_SURF	QSD8X72_SURF		3115
+qsd8x72_ffa		MACH_QSD8X72_FFA	QSD8X72_FFA		3116
+abilene			MACH_ABILENE		ABILENE			3117
+eigen_ttr		MACH_EIGEN_TTR		EIGEN_TTR		3118
+iomega_ix2_200		MACH_IOMEGA_IX2_200	IOMEGA_IX2_200		3119
+coretec_vcx7400		MACH_CORETEC_VCX7400	CORETEC_VCX7400		3120
+santiago		MACH_SANTIAGO		SANTIAGO		3121
+mx257sol		MACH_MX257SOL		MX257SOL		3122
+strasbourg		MACH_STRASBOURG		STRASBOURG		3123
+msm8x60_fluid		MACH_MSM8X60_FLUID	MSM8X60_FLUID		3124
+smartqv5		MACH_SMARTQV5		SMARTQV5		3125
+smartqv3		MACH_SMARTQV3		SMARTQV3		3126
+smartqv7		MACH_SMARTQV7		SMARTQV7		3127
+paz00			MACH_PAZ00		PAZ00			3128
+acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
+htcwillow		MACH_HTCWILLOW		HTCWILLOW		3130
+fwbd_0404		MACH_FWBD_0404		FWBD_0404		3131
+hdgu			MACH_HDGU		HDGU			3132
+pyramid			MACH_PYRAMID		PYRAMID			3133
+epiphan			MACH_EPIPHAN		EPIPHAN			3134
+omap_bender		MACH_OMAP_BENDER	OMAP_BENDER		3135
+gurnard			MACH_GURNARD		GURNARD			3136
+gtl_it5100		MACH_GTL_IT5100		GTL_IT5100		3137
+bcm2708			MACH_BCM2708		BCM2708			3138
+mx51_ggc		MACH_MX51_GGC		MX51_GGC		3139
+sharespace		MACH_SHARESPACE		SHARESPACE		3140
+haba_knx_explorer	MACH_HABA_KNX_EXPLORER	HABA_KNX_EXPLORER	3141
+simtec_kirkmod		MACH_SIMTEC_KIRKMOD	SIMTEC_KIRKMOD		3142
+crux			MACH_CRUX		CRUX			3143
+mx51_bravo		MACH_MX51_BRAVO		MX51_BRAVO		3144
+charon			MACH_CHARON		CHARON			3145
+picocom3		MACH_PICOCOM3		PICOCOM3		3146
+picocom4		MACH_PICOCOM4		PICOCOM4		3147
+serrano			MACH_SERRANO		SERRANO			3148
+doubleshot		MACH_DOUBLESHOT		DOUBLESHOT		3149
+evsy			MACH_EVSY		EVSY			3150
+huashan			MACH_HUASHAN		HUASHAN			3151
+lausanne		MACH_LAUSANNE		LAUSANNE		3152
+emerald			MACH_EMERALD		EMERALD			3153
+tqma35			MACH_TQMA35		TQMA35			3154
+marvel			MACH_MARVEL		MARVEL			3155
+manuae			MACH_MANUAE		MANUAE			3156
+chacha			MACH_CHACHA		CHACHA			3157
+lemon			MACH_LEMON		LEMON			3158
+csc			MACH_CSC		CSC			3159
+gira_knxip_router	MACH_GIRA_KNXIP_ROUTER	GIRA_KNXIP_ROUTER	3160
+t20			MACH_T20		T20			3161
+hdmini			MACH_HDMINI		HDMINI			3162
+sciphone_g2		MACH_SCIPHONE_G2	SCIPHONE_G2		3163
+express			MACH_EXPRESS		EXPRESS			3164
+express_kt		MACH_EXPRESS_KT		EXPRESS_KT		3165
+maximasp		MACH_MAXIMASP		MAXIMASP		3166
+nitrogen_imx51		MACH_NITROGEN_IMX51	NITROGEN_IMX51		3167
+nitrogen_imx53		MACH_NITROGEN_IMX53	NITROGEN_IMX53		3168
+sunfire			MACH_SUNFIRE		SUNFIRE			3169
+arowana			MACH_AROWANA		AROWANA			3170
+tegra_daytona		MACH_TEGRA_DAYTONA	TEGRA_DAYTONA		3171
+tegra_swordfish		MACH_TEGRA_SWORDFISH	TEGRA_SWORDFISH		3172
+edison			MACH_EDISON		EDISON			3173
+svp8500v1		MACH_SVP8500V1		SVP8500V1		3174
+svp8500v2		MACH_SVP8500V2		SVP8500V2		3175
+svp5500			MACH_SVP5500		SVP5500			3176
+b5500			MACH_B5500		B5500			3177
+s5500			MACH_S5500		S5500			3178
+icon			MACH_ICON		ICON			3179
+elephant		MACH_ELEPHANT		ELEPHANT		3180
+msm8x60_fusion		MACH_MSM8X60_FUSION	MSM8X60_FUSION		3181
+shooter			MACH_SHOOTER		SHOOTER			3182
+spade_lte		MACH_SPADE_LTE		SPADE_LTE		3183
+philhwani		MACH_PHILHWANI		PHILHWANI		3184
+gsncomm			MACH_GSNCOMM		GSNCOMM			3185
+strasbourg_a2		MACH_STRASBOURG_A2	STRASBOURG_A2		3186
+mmm			MACH_MMM		MMM			3187
+davinci_dm365_bv	MACH_DAVINCI_DM365_BV	DAVINCI_DM365_BV	3188
+ag5evm			MACH_AG5EVM		AG5EVM			3189
+sc575plc		MACH_SC575PLC		SC575PLC		3190
+sc575hmi		MACH_SC575IPC		SC575IPC		3191
+omap3_tdm3730		MACH_OMAP3_TDM3730	OMAP3_TDM3730		3192
+g7			MACH_G7			G7			3193
+top9000_eval		MACH_TOP9000_EVAL	TOP9000_EVAL		3194
+top9000_su		MACH_TOP9000_SU		TOP9000_SU		3195
+utm300			MACH_UTM300		UTM300			3196
+tsunagi			MACH_TSUNAGI		TSUNAGI			3197
+ts75xx			MACH_TS75XX		TS75XX			3198
+msm8x60_fusn_ffa	MACH_MSM8X60_FUSN_FFA	MSM8X60_FUSN_FFA	3199
+ts47xx			MACH_TS47XX		TS47XX			3200
+da850_k5		MACH_DA850_K5		DA850_K5		3201
+ax502			MACH_AX502		AX502			3202
+igep0032		MACH_IGEP0032		IGEP0032		3203
+antero			MACH_ANTERO		ANTERO			3204
+synergy			MACH_SYNERGY		SYNERGY			3205
+ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
+wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
+punica			MACH_PUNICA		PUNICA			3208
+sbc_nt250		MACH_SBC_NT250		SBC_NT250		3209
+mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
+mackerel		MACH_MACKEREL		MACKEREL		3211
+fa9x27			MACH_FA9X27		FA9X27			3213
+ns2816tb		MACH_NS2816TB		NS2816TB		3214
+ns2816_ntpad		MACH_NS2816_NTPAD	NS2816_NTPAD		3215
+ns2816_ntnb		MACH_NS2816_NTNB	NS2816_NTNB		3216
+kaen			MACH_KAEN		KAEN			3217
+nv1000			MACH_NV1000		NV1000			3218
+nuc950ts		MACH_NUC950TS		NUC950TS		3219
+nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
+ast2200			MACH_AST2200		AST2200			3221
+lead			MACH_LEAD		LEAD			3222
+unino1			MACH_UNINO1		UNINO1			3223
+greeco			MACH_GREECO		GREECO			3224
+verdi			MACH_VERDI		VERDI			3225
+dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
+quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
+abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
+svcid			MACH_SVCID		SVCID			3229
+msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
+msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
+icon_g			MACH_ICON_G		ICON_G			3232
+mb3			MACH_MB3		MB3			3233
+gsia18s			MACH_GSIA18S		GSIA18S			3234
+pivicc			MACH_PIVICC		PIVICC			3235
+pcm048			MACH_PCM048		PCM048			3236
+dds			MACH_DDS		DDS			3237
+chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -19,6 +19,8 @@ config MIPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE

 menu "Machine selection"

@ -1664,6 +1666,28 @@ config PAGE_SIZE_64KB

 endchoice

+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	range 11 64
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  Keep this in mind
+	  when choosing a value for this option.
+
 config BOARD_SCACHE
 	bool

@ -1921,20 +1945,6 @@ config CPU_R4000_WORKAROUNDS
 config CPU_R4400_WORKAROUNDS
 	bool

-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config IRQ_PER_CPU
-	bool
-
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@ -27,6 +27,7 @@
 static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 			    unsigned int old_state)
 {
+#ifdef CONFIG_SERIAL_8250
 	switch (state) {
 	case 0:
 		if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 		serial8250_do_pm(port, state, old_state);
 		break;
 	}
+#endif
 }

 #define PORT(_base, _irq)					\
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@ -54,10 +54,9 @@ void __init prom_init(void)

 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
 		memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
+
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	calculate(base_clock, frequency, &prediv, &postdiv, &mul);

 	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
-	msleep(1);
+	mdelay(1);
 	writel(4, &clock->pll);
 	while (readl(&clock->pll) & PLL_STATUS)
 		;
 	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
-	msleep(75);
+	mdelay(75);
 }

 static void __init tnetd7300_init_clocks(void)
@ -456,7 +456,7 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);

-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
 	case AR7_CHIP_7100:
@ -472,7 +472,4 @@ int __init ar7_init_clocks(void)
 	}
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
-
-	return 0;
 }
-arch_initcall(ar7_init_clocks);
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@ -30,6 +30,9 @@ void __init plat_time_init(void)
 {
 	struct clk *cpu_clk;

+	/* Initialize ar7 clocks so the CPU clock frequency is correct */
+	ar7_init_clocks();
+
 	cpu_clk = clk_get(NULL, "cpu");
 	if (IS_ERR(cpu_clk)) {
 		printk(KERN_ERR "unable to get cpu clock\n");
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@ -32,7 +32,6 @@
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
 #include <asm/mach-bcm47xx/nvram.h>

 struct ssb_bus ssb_bcm47xx;
@ -57,68 +56,112 @@ static void bcm47xx_machine_halt(void)
 		cpu_relax();
 }

-static void str2eaddr(char *str, char *dest)
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 {
-	int i = 0;
+	char buf[100];
+	u32 boardflags;

-	if (str == NULL) {
-		memset(dest, 0, 6);
-		return;
+	memset(sprom, 0, sizeof(struct ssb_sprom));
+
+	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+	READ_FROM_NVRAM(revision, "sromrev", buf);
+	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->il0mac);
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et0mac);
+	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et1mac);
+	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+	READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+	READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+	READ_FROM_NVRAM(board_rev, "boardrev", buf);
+	READ_FROM_NVRAM(country_code, "ccode", buf);
+	READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+	READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+	READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+	READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+	READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+	READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+	READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+	READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+	READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+	READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+	READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+	READ_FROM_NVRAM(tri2g, "tri2g", buf);
+	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+	READ_FROM_NVRAM(tri5g, "tri5g", buf);
+	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+	READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+	READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+	READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+	READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+	READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
-
-	for (;;) {
-		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-		str += 2;
-		if (!*str++ || i == 6)
-			break;
+	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
 }

 static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				   struct ssb_init_invariants *iv)
 {
-	char buf[100];
+	char buf[20];

 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));

-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+		iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+	else
+		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);

-	/* Fill sprom structure */
-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
-	iv->sprom.revision = 3;
+	bcm47xx_fill_sprom(&iv->sprom);

-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et0mac);
-
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et1mac);
-
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);

 	return 0;
 }
@ -126,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 void __init plat_mem_setup(void)
 {
 	int err;
+	char buf[100];
+	struct ssb_mipscore *mcore;

 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
 		panic("Failed to initialize SSB bus (err %d)\n", err);

+	mcore = &ssb_bcm47xx.mipscore;
+	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+		if (strstr(buf, "console=ttyS1")) {
+			struct ssb_serial_port port;
+
+			printk(KERN_DEBUG "Swapping serial ports!\n");
+			/* swap serial ports */
+			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+			       sizeof(port));
+			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+		}
+	}
+
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@ -111,8 +111,8 @@
 * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
 */

-#define PRID_IMP_BMIPS4KC	0x4000
-#define PRID_IMP_BMIPS32	0x8000
+#define PRID_IMP_BMIPS32_REV4	0x4000
+#define PRID_IMP_BMIPS32_REV8	0x8000
 #define PRID_IMP_BMIPS3300	0x9000
 #define PRID_IMP_BMIPS3300_ALT	0x9100
 #define PRID_IMP_BMIPS3300_BUG	0x0000
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32;

 #define SET_PERSONALITY(ex)						\
 do {									\
-	set_personality(PER_LINUX);					\
+	if (personality(current->personality) != PER_LINUX)		\
+		set_personality(PER_LINUX);				\
 									\
 	current->thread.abi = &mips_abi;				\
 } while (0)
@ -296,6 +297,8 @@ do {									\

 #define SET_PERSONALITY(ex)						\
 do {									\
+	unsigned int p;							\
+									\
 	clear_thread_flag(TIF_32BIT_REGS);				\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
@ -304,7 +307,8 @@ do {									\
 	else								\
 		current->thread.abi = &mips_abi;			\
 									\
-	if (current->personality != PER_LINUX32)			\
+	p = personality(current->personality);				\
+	if (p != PER_LINUX32 && p != PER_LINUX)				\
 		set_personality(PER_LINUX);				\
 } while (0)

--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val,				\
 			"dsrl32	%L0, %L0, 0"			"\n\t"	\
 			"dsll32	%M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__tmp)					\
-			: "0" (__val), "m" (*__mem));			\
+			: "0" (__val), "R" (*__mem));			\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else								\
@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			"dsra32	%M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
-			: "m" (*__mem));				\
+			: "R" (*__mem));				\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else {							\
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@ -201,7 +201,6 @@ static inline void ar7_device_off(u32 bit)
 }

 int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);

 #endif /* __AR7_H__ */
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@ -12,6 +12,7 @@
 #define __NVRAM_H

 #include <linux/types.h>
+#include <linux/kernel.h>

 struct nvram_header {
 	u32 magic;
@ -36,4 +37,10 @@ struct nvram_header {

 extern int nvram_getenv(char *name, char *val, size_t val_len);

+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
 #endif
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@ -5,7 +5,7 @@
 *
 * Copyright (c) 2009 Qi Hardware inc.,
 * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 or later
@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = {
 	QI_LB60_GPIO_KEYIN(3),
 	QI_LB60_GPIO_KEYIN(4),
 	QI_LB60_GPIO_KEYIN(5),
-	QI_LB60_GPIO_KEYIN(7),
+	QI_LB60_GPIO_KEYIN(6),
 	QI_LB60_GPIO_KEYIN8,
 };

--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = {

 /* PCM */
 struct platform_device jz4740_pcm_device = {
-	.name		= "jz4740-pcm",
+	.name		= "jz4740-pcm-audio",
 	.id		= -1,
 };

--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@ -23,7 +23,7 @@
 #include <asm/bootinfo.h>
 #include <asm/mach-jz4740/base.h>

-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
 {
 	unsigned int count = COMMAND_LINE_SIZE - 1;
 	int i;
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta,
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
-	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+	res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
 	return res;
 }

--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
-	case PRID_IMP_BMIPS32:
+	case PRID_IMP_BMIPS32_REV4:
+	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
 		__cpu_name[cpu] = "Broadcom BMIPS32";
 		break;
@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
 		c->options |= MIPS_CPU_ULRI;
 		break;
-	case PRID_IMP_BMIPS4KC:
-		c->cputype = CPU_4KC;
-		__cpu_name[cpu] = "MIPS 4Kc";
-		break;
 	}
 }

--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,

 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
+	unsigned int p = personality & 0xffffffff;
 	int ret;
-	personality &= 0xffffffff;
+
 	if (personality(current->personality) == PER_LINUX32 &&
-	    personality == PER_LINUX)
-		personality = PER_LINUX32;
-	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	    personality(p) == PER_LINUX)
+		p = (p & ~PER_MASK) | PER_LINUX32;
+	ret = sys_personality(p);
+	if (ret != -1 && personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
 	return ret;
 }

--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childregs->regs[7] = 0;	/* Clear error flag */

 	childregs->regs[2] = 0;	/* Child gets zero as return value */
-	regs->regs[2] = p->pid;

 	if (childregs->cp0_status & ST0_CU0) {
 		childregs->regs[28] = (unsigned long) ti;
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@ -100,7 +100,7 @@ void __init device_tree_init(void)
 		return;

 	base = virt_to_phys((void *)initial_boot_params);
-	size = initial_boot_params->totalsize;
+	size = be32_to_cpu(initial_boot_params->totalsize);

 	/* Before we do anything, lets reserve the dt blob */
 	reserve_mem_mach(base, size);
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void)
 {
 	extern int gic_present;

-	/* This is Malta specific: IPI,performance and timer inetrrupts */
+	/* This is Malta specific: IPI,performance and timer interrupts */
 	if (gic_present)
 		change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
 					 STATUSF_IP6 | STATUSF_IP7);
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void);
 extern asmlinkage void handle_reserved(void);

 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-	struct mips_fpu_struct *ctx, int has_fpu);
+				    struct mips_fpu_struct *ctx, int has_fpu,
+				    void *__user *fault_addr);

 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	force_sig_info(SIGFPE, &info, current);
 }

+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+	if (sig == SIGSEGV || sig == SIGBUS) {
+		struct siginfo si = {0};
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		if (sig == SIGSEGV) {
+			if (find_vma(current->mm, (unsigned long)fault_addr))
+				si.si_code = SEGV_ACCERR;
+			else
+				si.si_code = SEGV_MAPERR;
+		} else {
+			si.si_code = BUS_ADRERR;
+		}
+		force_sig_info(sig, &si, current);
+		return 1;
+	} else if (sig) {
+		force_sig(sig, current);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 /*
 * XXX Delayed fp exceptions when doing a lazy ctx switch XXX
 */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
-	siginfo_t info;
+	siginfo_t info = {0};

 	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
 	    == NOTIFY_STOP)
@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)

 	if (fcr31 & FPU_CSR_UNI_X) {
 		int sig;
+		void __user *fault_addr = NULL;

 		/*
 		 * Unimplemented operation exception.  If we've got the full
@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		lose_fpu(1);

 		/* Run the emulator */
-		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1);
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);

 		/*
 		 * We can't allow the emulated instruction to leave any of
@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		own_fpu(1);	/* Using the FPU again.  */

 		/* If something went wrong, signal */
-		if (sig)
-			force_sig(sig, current);
+		process_fpemu_return(sig, fault_addr);

 		return;
 	} else if (fcr31 & FPU_CSR_INV_X)
@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs)

 		if (!raw_cpu_has_fpu) {
 			int sig;
+			void __user *fault_addr = NULL;
 			sig = fpu_emulator_cop1Handler(regs,
-						&current->thread.fpu, 0);
-			if (sig)
-				force_sig(sig, current);
-			else
+						       &current->thread.fpu,
+						       0, &fault_addr);
+			if (!process_fpemu_return(sig, fault_addr))
 				mt_ase_fp_affinity();
 		}

--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp)

 	/* this of-course trashes what was there before... */
 	v->pbuffer = vmalloc(P_SIZE);
+	if (!v->pbuffer) {
+		pr_warning("VPE loader: unable to allocate memory\n");
+		return -ENOMEM;
+	}
 	v->plen = P_SIZE;
 	v->load_addr = NULL;
 	v->len = 0;
@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp)
 	if (ret < 0)
 		v->shared_ptr = NULL;

-	// cleanup any temp buffers
-	if (v->pbuffer)
-		vfree(v->pbuffer);
+	vfree(v->pbuffer);
 	v->plen = 0;
+
 	return ret;
 }

@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer,
 	if (v == NULL)
 		return -ENODEV;

-	if (v->pbuffer == NULL) {
-		printk(KERN_ERR "VPE loader: no buffer for program\n");
-		return -ENOMEM;
-	}
-
 	if ((count + v->len) > v->plen) {
 		printk(KERN_WARNING
 		       "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@ -161,16 +161,16 @@ FEXPORT(__bzero)

 .Lfwd_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, 0x3f
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0

 .Lpartial_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, LONGMASK
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@ -29,9 +29,9 @@ unsigned long memsize, highmemsize;

 #define parse_even_earlier(res, option, p)				\
 do {									\
+	int ret;							\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-			strict_strtol((char *)p + strlen(option"="),	\
-					10, &res);			\
+		ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
 } while (0)

 void __init prom_init_env(void)
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,

 #if __mips >= 4 && __mips != 32
 static int fpux_emu(struct pt_regs *,
-	struct mips_fpu_struct *, mips_instruction);
+	struct mips_fpu_struct *, mips_instruction, void *__user *);
 #endif

 /* Further private data for which no space exists in mips_fpu_struct */
@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp)
 * Two instructions if the instruction is in a branch delay slot.
 */

-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+		       void *__user *fault_addr)
 {
 	mips_instruction ir;
 	unsigned long emulpc, contpc;
 	unsigned int cond;

-	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+	if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 		return SIGBUS;
 	}
+	if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+		return SIGSEGV;
+	}

 	/* XXX NEC Vr54xx bug workaround */
 	if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 #endif
 			return SIGILL;
 		}
-		if (get_user(ir, (mips_instruction __user *) emulpc)) {
+		if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
 			return SIGBUS;
 		}
+		if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
+			return SIGSEGV;
+		}
 		/* __compute_return_epc() will have updated cp0_epc */
 		contpc = xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u64 val;

 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+
+		if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		DITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)

 		MIPS_FPU_EMU_INC_STATS(stores);
 		DIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}

@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u32 val;

 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+		if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		SITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)

 		MIPS_FPU_EMU_INC_STATS(stores);
 		SIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}

@ -440,10 +478,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 				contpc = (xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));

-				if (get_user(ir,
+				if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+					       sizeof(mips_instruction))) {
+					MIPS_FPU_EMU_INC_STATS(errors);
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+					return SIGBUS;
+				}
+				if (__get_user(ir,
 				    (mips_instruction __user *) xcp->cp0_epc)) {
 					MIPS_FPU_EMU_INC_STATS(errors);
-					return SIGBUS;
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+					return SIGSEGV;
 				}

 				switch (MIPSInst_OPCODE(ir)) {
@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)

 #if __mips >= 4 && __mips != 32
 	case cop1x_op:{
-		int sig;
-
-		if ((sig = fpux_emu(xcp, ctx, ir)))
+		int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+		if (sig)
 			return sig;
 		break;
 	}
@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg);
 DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);

 static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	mips_instruction ir)
+	mips_instruction ir, void *__user *fault_addr)
 {
 	unsigned rcsr = 0;	/* resulting csr */

@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);

 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			SITOREG(val, MIPSInst_FD(ir));
 			break;

@ -638,9 +688,15 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			MIPS_FPU_EMU_INC_STATS(stores);

 			SIFROMREG(val, MIPSInst_FS(ir));
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGBUS;
+			}
 			if (put_user(val, va)) {
 				MIPS_FPU_EMU_INC_STATS(errors);
-				return SIGBUS;
+				*fault_addr = va;
+				return SIGSEGV;
 			}
 			break;

@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);

 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			DITOREG(val, MIPSInst_FD(ir));
 			break;

@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,

 			MIPS_FPU_EMU_INC_STATS(stores);
 			DIFROMREG(val, MIPSInst_FS(ir));
-			if (put_user(val, va)) {
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__put_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			break;

 		case madd_d_op:
@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 }

 int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	int has_fpu)
+	int has_fpu, void *__user *fault_addr)
 {
 	unsigned long oldepc, prevepc;
 	mips_instruction insn;
@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 	do {
 		prevepc = xcp->cp0_epc;

-		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+		if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 			return SIGBUS;
 		}
+		if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+			return SIGSEGV;
+		}
 		if (insn == 0)
 			xcp->cp0_epc += 4;	/* skip nops */
 		else {
@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			 */
 			/* convert to ieee library modes */
 			ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
-			sig = cop1Emulate(xcp, ctx);
+			sig = cop1Emulate(xcp, ctx, fault_addr);
 			/* revert to mips rounding mode */
 			ieee754_csr.rm = mips_rm[ieee754_csr.rm];
 		}
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask)
 	return plat_dma_supported(dev, mask);
 }

-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 			 enum dma_data_direction direction)
 {
 	BUG_ON(direction == DMA_NONE);
@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		__dma_sync((unsigned long)vaddr, size, direction);
 }

+EXPORT_SYMBOL(dma_cache_sync);
+
 static struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc_coherent = mips_dma_alloc_coherent,
 	.free_coherent = mips_dma_free_coherent,
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@ -68,6 +68,9 @@ static struct bcache_ops mips_sc_ops = {
 */
 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 {
+	unsigned int config2 = read_c0_config2();
+	unsigned int tmp;
+
 	/* Check the bypass bit (L2B) */
 	switch (c->cputype) {
 	case CPU_34K:
@ -83,6 +86,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 		c->scache.linesz = 2 << tmp;
 	else
 		return 0;
+	return 1;
 }

 static inline int __init mips_sc_probe(void)
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys)

 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	lbu	%0, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=r" (res)
-	: "m" (vaddr));
+	: "R" (vaddr));

 	write_c0_status(sr);
 	ssnop_4();
@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c)

 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	sb	%2, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=&r" (tmp)
-	: "m" (vaddr), "r" (c));
+	: "R" (vaddr), "r" (c));

 	write_c0_status(sr);
 	ssnop_4();
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 enum swarm_rtc_type {
 	RTC_NONE,
 	RTC_XICOR,
-	RTC_M4LT81
+	RTC_M41T81,
 };

 enum swarm_rtc_type swarm_rtc_type;
@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts)
 		sec = xicor_get_time();
 		break;

-	case RTC_M4LT81:
+	case RTC_M41T81:
 		sec = m41t81_get_time();
 		break;

@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec)
 	case RTC_XICOR:
 		return xicor_set_time(sec);

-	case RTC_M4LT81:
+	case RTC_M41T81:
 		return m41t81_set_time(sec);

 	case RTC_NONE:
@ -141,7 +141,7 @@ void __init plat_mem_setup(void)
 	if (xicor_probe())
 		swarm_rtc_type = RTC_XICOR;
 	if (m41t81_probe())
-		swarm_rtc_type = RTC_M4LT81;
+		swarm_rtc_type = RTC_M41T81;

 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@ -459,7 +459,7 @@ void migrate_irqs(void)
 			tmp = CROSS_GxICR(irq, new);

 			x &= GxICR_LEVEL | GxICR_ENABLE;
-			if (GxICR(irq) & GxICR_REQUEST) {
+			if (GxICR(irq) & GxICR_REQUEST)
 				x |= GxICR_REQUEST | GxICR_DETECT;
 			CROSS_GxICR(irq, new) = x;
 			tmp = CROSS_GxICR(irq, new);
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@ -40,21 +40,17 @@ unsigned long long sched_clock(void)
 		unsigned long long ll;
 		unsigned l[2];
 	} tsc64, result;
-	unsigned long tsc, tmp;
+	unsigned long tmp;
 	unsigned product[3]; /* 96-bit intermediate value */

 	/* cnt32_to_63() is not safe with preemption */
 	preempt_disable();

-	/* read the TSC value
-	 */
-	tsc = get_cycles();
-
-	/* expand to 64-bits.
+	/* expand the tsc to 64-bits.
 	 * - sched_clock() must be called once a minute or better or the
 	 *   following will go horribly wrong - see cnt32_to_63()
 	 */
-	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+	tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;

 	preempt_enable();

--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@ -63,6 +63,7 @@
 #include <linux/of_gpio.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/fs.h>
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */

-	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */

 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@ -368,8 +368,9 @@
 #define __NR_sendmsg		355
 #define __NR_recvmsg		356
 #define __NR_recvmmsg		357
+#define __NR_accept4		358

-#define NR_syscalls 358
+#define NR_syscalls 359

 #ifdef __KERNEL__

--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk)
 	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
 		int divisor = frqcr3_divisors[i];

-		if (clk->ops->set_rate(clk, clk->parent->rate /
-						divisor, 0) == 0)
+		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
 			break;
 	}

--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@ -375,3 +375,4 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 355 */
 	.long sys_recvmsg
 	.long sys_recvmmsg
+	.long sys_accept4
--- a/arch/sparc/include/asm/openprom.h
+++ b/arch/sparc/include/asm/openprom.h
@ -39,7 +39,7 @@ struct linux_dev_v2_funcs {
 	int (*v2_dev_open)(char *devpath);
 	void (*v2_dev_close)(int d);
 	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, const char *buf, int nbytes);
 	int (*v2_dev_seek)(int d, int hi, int lo);

 	/* Never issued (multistage load support) */
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@ -60,25 +60,6 @@ extern char *prom_getbootargs(void);
 extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
 extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);

-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */

 /* Reboot the machine with the command line passed. */
@ -121,19 +102,8 @@ extern int prom_getrev(void);
 /* Get the prom firmware revision. */
 extern int prom_getprev(void);

-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);

 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@ -238,7 +208,6 @@ extern int prom_node_has_property(phandle node, char *property);
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);

-extern phandle prom_pathtoinode(char *path);
 extern phandle prom_inst2pkg(int);

 /* Dorking with Bus ranges... */
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack);
 /* Boot argument acquisition, returns the boot command line string. */
 extern char *prom_getbootargs(void);

-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */

 /* Reboot the machine with the command line passed. */
@ -109,33 +88,14 @@ extern void prom_halt(void) __attribute__ ((noreturn));
 /* Halt and power-off the machine. */
 extern void prom_halt_power_off(void) __attribute__ ((noreturn));

-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
 /* Acquire the IDPROM of the root node in the prom device tree.  This
 * gets passed a buffer where you would like it stuffed.  The return value
 * is the format type of this idprom or 0xff on error.
 */
 extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);

-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);

 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@ -279,9 +239,7 @@ extern phandle prom_finddevice(const char *name);
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);

-extern phandle prom_pathtoinode(const char *path);
 extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
 extern void prom_sun4v_guest_soft_state(void);

 extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@ -114,7 +114,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 	if (leon3_gptimer_regs && leon3_irqctrl_regs) {
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
-				      (((1000000 / 100) - 1)));
+				      (((1000000 / HZ) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);

 #ifdef CONFIG_SMP
@ -128,7 +128,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 		}

 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
 # endif

--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@ -6,7 +6,6 @@ ccflags := -Werror

 lib-y                 := bootstr_$(BITS).o
 lib-$(CONFIG_SPARC32) += devmap.o
-lib-y                 += devops_$(BITS).o
 lib-y                 += init_$(BITS).o
 lib-$(CONFIG_SPARC32) += memory.o
 lib-y                 += misc_$(BITS).o
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@ -16,63 +16,26 @@

 extern void restore_current(void);

-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
-	static char inc;
-	int i = -1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		i = (*(romvec->pv_nbgetchar))();
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
-			i = inc;
-		} else {
-			i = -1;
-		}
-		break;
-	default:
-		i = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
 /* Non blocking put character to console device, returns -1 if
 * unsuccessful.
 */
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
 {
-	static char outc;
 	unsigned long flags;
 	int i = -1;

 	spin_lock_irqsave(&prom_lock, flags);
 	switch(prom_vers) {
 	case PROM_V0:
-		i = (*(romvec->pv_nbputchar))(c);
+		i = (*(romvec->pv_nbputchar))(*buf);
 		break;
 	case PROM_V2:
 	case PROM_V3:
-		outc = c;
-		if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
+		if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+							  buf, 0x1) == 1)
 			i = 0;
-		else
-			i = -1;
 		break;
 	default:
-		i = -1;
 		break;
 	};
 	restore_current();
@ -80,18 +43,14 @@ prom_nbputchar(char c)
 	return i; /* Ugh, we could spin forever on unsupported proms ;( */
 }

-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
 {
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
+	while (len) {
+		int n = prom_nbputchar(buf);
+		if (n)
+			continue;
+		len--;
+		buf++;
+	}
 }

-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	while(prom_nbputchar(c) == -1) ;
-}
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@ -15,85 +15,34 @@

 extern int prom_stdin, prom_stdout;

-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
+static int __prom_console_write_buf(const char *buf, int len)
 {
 	unsigned long args[7];
-	char inc;
-
-	args[0] = (unsigned long) "read";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdin;
-	args[4] = (unsigned long) &inc;
-	args[5] = 1;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	if (args[6] == 1)
-		return inc;
-	return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
-{
-	unsigned long args[7];
-	char outc;
-	
-	outc = c;
+	int ret;

 	args[0] = (unsigned long) "write";
 	args[1] = 3;
 	args[2] = 1;
 	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) &outc;
-	args[5] = 1;
+	args[4] = (unsigned long) buf;
+	args[5] = (unsigned int) len;
 	args[6] = (unsigned long) -1;

 	p1275_cmd_direct(args);

-	if (args[6] == 1)
-		return 0;
-	else
+	ret = (int) args[6];
+	if (ret < 0)
 		return -1;
+	return ret;
 }

-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
 {
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "write";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) s;
-	args[5] = len;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
+	while (len) {
+		int n = __prom_console_write_buf(buf, len);
+		if (n < 0)
+			continue;
+		len -= n;
+		buf += len;
+	}
 }
--- a/arch/sparc/prom/devops_32.c
+++ b/arch/sparc/prom/devops_32.c
@ -1,87 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
-	int handle;
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
-		if(handle == 0) handle = -1;
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
-		break;
-	default:
-		handle = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_devclose))(dhandle);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_close))(dhandle);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-}
--- a/arch/sparc/prom/devops_64.c
+++ b/arch/sparc/prom/devops_64.c
@ -1,67 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
-	unsigned long args[5];
-
-	args[0] = (unsigned long) "open";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) dstr;
-	args[4] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long args[4];
-
-	args[0] = (unsigned long) "close";
-	args[1] = 1;
-	args[2] = 0;
-	args[3] = (unsigned int) dhandle;
-
-	p1275_cmd_direct(args);
-
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "seek";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) dhandle;
-	args[4] = seekhi;
-	args[5] = seeklo;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-}
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/ldc.h>

-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
 {
 	unsigned long args[5];

@ -150,20 +150,6 @@ void prom_halt_power_off(void)
 	prom_halt();
 }

-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
-	unsigned long args[5];
-	if (!funcp)
-		return;
-	args[0] = (unsigned long) "set-callback";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) funcp;
-	args[4] = (unsigned long) -1;
-	p1275_cmd_direct(args);
-}
-
 /* Get the idprom and stuff it into buffer 'idbuf'.  Returns the
 * format type.  'num_bytes' is the number of bytes that your idbuf
 * has space for.  Returns 0xff on error.
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@ -15,22 +15,45 @@

 #include <linux/kernel.h>
 #include <linux/compiler.h>
+#include <linux/spinlock.h>

 #include <asm/openprom.h>
 #include <asm/oplib.h>

+#define CONSOLE_WRITE_BUF_SIZE	1024
+
 static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);

 void notrace prom_write(const char *buf, unsigned int n)
 {
-	char ch;
+	unsigned int dest_len;
+	unsigned long flags;
+	char *dest;

-	while (n != 0) {
-		--n;
-		if ((ch = *buf++) == '\n')
-			prom_putchar('\r');
-		prom_putchar(ch);
+	dest = console_write_buf;
+	raw_spin_lock_irqsave(&console_write_lock, flags);
+
+	dest_len = 0;
+	while (n-- != 0) {
+		char ch = *buf++;
+		if (ch == '\n') {
+			*dest++ = '\r';
+			dest_len++;
+		}
+		*dest++ = ch;
+		dest_len++;
+		if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+			prom_console_write_buf(console_write_buf, dest_len);
+			dest = console_write_buf;
+			dest_len = 0;
+		}
 	}
+	if (dest_len)
+		prom_console_write_buf(console_write_buf, dest_len);
+
+	raw_spin_unlock_irqrestore(&console_write_lock, flags);
 }

 void notrace prom_printf(const char *fmt, ...)
--- a/Show More
+++ b/Show More