From bfe75c7e67e5f32bf446a48e0502d06d25b51752 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jan 2012 16:27:38 +0900
Subject: [PATCH 001/202] sh: Defer to asm-generic/device.h.

Now that the hwblk use cases have been ripped out, we can revert to
asm-generic/device.h for the device/platform device arch data structures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/device.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index a1c9c0daec10..071bcb4d4bfd 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,9 +3,10 @@
  *
  * This file is released under the GPLv2
  */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
 
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */

From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jan 2012 16:42:50 +0900
Subject: [PATCH 002/202] video: pvr2fb: Fix up spurious section mismatch
 warnings.

pvr2fb special cases its init/exit routines which causes spurious section
mismatches. Set the board_driver array __refdata to silence them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/pvr2fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index f9975100d56d..3a3fdc62c75b 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -1061,7 +1061,7 @@ static struct pvr2_board {
 	int (*init)(void);
 	void (*exit)(void);
 	char name[16];
-} board_driver[] = {
+} board_driver[] __refdata = {
 #ifdef CONFIG_SH_DREAMCAST
 	{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
 #endif

From 78da107a7ed14fbc6ef77ff4c41d92b11edc9036 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Tue, 17 Jan 2012 17:49:38 +0900
Subject: [PATCH 003/202] sh: fix the sh_mmcif_plat_data in board-sh7757lcr

The board has an eMMC chip, so we cannot remove the chip.
In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps
parameter.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 0838154dd216..33dc5b6e8e17 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -222,7 +222,8 @@ static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
 };
 

From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:05:40 +0900
Subject: [PATCH 004/202] ARM: mach-shmobile: sh73a0 PINT IRQ base fix

Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid
collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx.

Without this fix the sh73a0 IRQ pin handling code collides
with the PINT code which results in hangs on Kota2 during boot.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515a9686..cad57578ceed 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */

From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:10:49 +0900
Subject: [PATCH 005/202] ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix

Fix the sh73a0 external IRQ pin code to properly support
CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the
cascaded IRQs associated with external IRQ pins.

Without this fix it is impossible to request IRQ0->IRQ31
on the Kota2 board when sparse IRQs are enabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/intc-sh73a0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0b69e3..9857595eaa79 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */

From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:14:07 +0900
Subject: [PATCH 006/202] ARM: mach-shmobile: IRQ driven GPIO key support for
 Kota2

Now when GPIO IRQs are supported on sh73a0 modify the Kota2
board code to switch from the polled "gpio-keys-polled" driver
to the IRQ driven "gpio-keys" driver.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-kota2.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceeec1bb0..c8e7ca23fc06 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,

From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 30 Aug 2011 18:26:44 +0200
Subject: [PATCH 007/202] ARM: mach-shmobile: simplify MMCIF DMA configuration

Use the simplified method to specify MMCIF DMA slave configuration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c   | 11 ++---------
 arch/arm/mach-shmobile/board-ap4evb.c   | 12 ++----------
 arch/arm/mach-shmobile/board-mackerel.c | 12 ++----------
 3 files changed, 6 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96c75ee..729eaee5a151 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a349f759..eeb4d9664584 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8e..1a955e2a334f 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

From 482835ce02726652becc36b64522cbabc0adbeee Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 18 Jan 2012 10:24:17 +0100
Subject: [PATCH 008/202] sh: sh7757lcr: update to the new MMCIF DMA
 configuration

Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is
deprecated. Update sh7757lcr to specify slave IDs embedded in
struct sh_mmcif_plat_data.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 33dc5b6e8e17..8d2ae109a83a 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -210,21 +210,13 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_TX,
-	},
-	.chan_priv_rx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_RX,
-	}
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
 	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

From 833218f16b1fbfdff0dbb9ac477cf0c6e85cd4f5 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 01:44:22 -0800
Subject: [PATCH 009/202] sh: clock-sh7724: fixup sh_fsi clock settings

sh_fsi needs HWBLK_SPU clock on sh7724

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index b3c039a5064a..70bd96646f42 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
 	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
 	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
-	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
 	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
 	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
 	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),

From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 17:32:05 -0800
Subject: [PATCH 010/202] ARM: mach-shmobile: mackerel: use renesas_usbhs
 instead of r8a66597_hcd

Current renesas_usbhs driver can use both USB host/gadget.
This patch removes current r8a66597_hcd driver settings,
and adds renesas_usbhs host driver settings for mackerel USB1 port.
You can still use this port as "gadget" with small modify.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-mackerel.c | 73 +++----------------------
 1 file changed, 9 insertions(+), 64 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8e..f0cc307df640 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1421,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);

From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 16:37:07 -0800
Subject: [PATCH 011/202] ARM: mach-shmobile: mackerel: add ak4642 amixer
 settings on comment

current ak4642 needs amixer settings for playing which was not
needed on old kernel.
This patch show it on comment area

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-mackerel.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f0cc307df640..c4a6a9b16d1b 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -192,6 +192,16 @@
  *
  */
 
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
 /*
  * FIXME !!
  *

From 620c231c7a7f48745094727bb612f6321cfc8844 Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Date: Tue, 17 Jan 2012 14:50:51 -0200
Subject: [PATCH 012/202] kbuild: do not check for ancient modutils tools

scripts/depmod.sh checks for the output of '-V' expecting that it has
module-init-tools in it. It's a hack to prevent users from using
modutils instead of module-init-tools, that only works with 2.4.x
kernels. This however prints an annoying warning for kmod tool, that is
currently replacing module-init-tools.

Rather than putting another check for kmod's version, just remove it
since users of 2.4.x kernel are unlikely to upgrade to 3.x, and if they
do, let depmod fail in that case because they should know what they are
doing.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: WANG Cong <amwang@redhat.com>
Acked-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
---
 scripts/depmod.sh | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/scripts/depmod.sh b/scripts/depmod.sh
index a27235685949..2ae481703141 100755
--- a/scripts/depmod.sh
+++ b/scripts/depmod.sh
@@ -9,12 +9,6 @@ fi
 DEPMOD=$1
 KERNELRELEASE=$2
 
-if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
-	echo "Warning: you may need to install module-init-tools" >&2
-	echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
-	sleep 1
-fi
-
 if ! test -r System.map -a -x "$DEPMOD"; then
 	exit 0
 fi

From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Sun, 22 Jan 2012 14:57:25 -0500
Subject: [PATCH 013/202] arm: fix compile failure in
 mach-shmobile/board-ag5evm.c

Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix:

arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function)

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index a4e6ca04e319..75596948029c 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>

From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Sun, 22 Jan 2012 21:10:02 -0800
Subject: [PATCH 014/202] ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock
 support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c |  16 +++-
 arch/arm/mach-shmobile/clock-sh73a0.c | 113 ++++++++++++++++++++++++++
 2 files changed, 125 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 729eaee5a151..2e1334f56995 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6a6e17..7727cca6136c 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)

From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 23 Jan 2012 15:52:03 +0100
Subject: [PATCH 015/202] ARM: mach-shmobile: add GPIO-to-IRQ translation to
 sh7372

This table is required to support the gpio_to_irq() translation.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/pfc-sh7372.c | 41 +++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a6acf..336093f9210a 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)

From 64dea57588f49736c2a7778292f3967c7984ab94 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Thu, 19 Jan 2012 01:00:40 -0800
Subject: [PATCH 016/202] sh: clkfwk: bugfix: use clk_reparent() for div6
 clocks

Various problems will happen if clk parent was set up directly.
it should use clk_reparent()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/cpg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 45fee368b092..92d314a73f69 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk)
 		return -EINVAL;
 	}
 
-	clk->parent = clk->parent_table[val];
+	clk_reparent(clk, clk->parent_table[val]);
 	if (!clk->parent) {
 		pr_err("sh_clk_init_parent: unable to set parent");
 		return -EINVAL;

From 8791d63af0cf113725ae4cb8cba9492814c59a93 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 26 Jan 2012 12:04:11 -0300
Subject: [PATCH 017/202] [media] imon: don't wedge hardware after early
 callbacks

This patch is just a minor update to one titled "imon: Input from ffdc
device type ignored" from Corinna Vinschen. An earlier patch to prevent
an oops when we got early callbacks also has the nasty side-effect of
wedging imon hardware, as we don't acknowledge the urb. Rework the check
slightly here to bypass processing the packet, as the driver isn't yet
fully initialized, but still acknowlege the urb and submit a new rx_urb.
Do this for both interfaces -- irrelevant for ffdc hardware, but
relevant for newer hardware, though newer hardware doesn't spew the
constant stream of data as soon as the hardware is initialized like the
older ffdc devices, so they'd be less likely to trigger this anyway...

Tested with both an ffdc device and an 0042 device.

Reported-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/imon.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 6ed96465137a..3f175ebe2766 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -47,7 +47,7 @@
 #define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
 #define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
 #define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.3"
+#define MOD_VERSION	"0.9.4"
 
 #define DISPLAY_MINOR_BASE	144
 #define DEVICE_NAME	"lcd%d"
@@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb)
 		return;
 
 	ictx = (struct imon_context *)urb->context;
-	if (!ictx || !ictx->dev_present_intf0)
+	if (!ictx)
 		return;
 
+	/*
+	 * if we get a callback before we're done configuring the hardware, we
+	 * can't yet process the data, as there's nowhere to send it, but we
+	 * still need to submit a new rx URB to avoid wedging the hardware
+	 */
+	if (!ictx->dev_present_intf0)
+		goto out;
+
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb)
 		break;
 	}
 
+out:
 	usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
 }
 
@@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb)
 		return;
 
 	ictx = (struct imon_context *)urb->context;
-	if (!ictx || !ictx->dev_present_intf1)
+	if (!ictx)
 		return;
 
+	/*
+	 * if we get a callback before we're done configuring the hardware, we
+	 * can't yet process the data, as there's nowhere to send it, but we
+	 * still need to submit a new rx URB to avoid wedging the hardware
+	 */
+	if (!ictx->dev_present_intf1)
+		goto out;
+
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb)
 		break;
 	}
 
+out:
 	usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
 }
 
@@ -2242,7 +2260,7 @@ find_endpoint_failed:
 	mutex_unlock(&ictx->lock);
 	usb_free_urb(rx_urb);
 rx_urb_alloc_failed:
-	dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+	dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
 
 	return NULL;
 }

From a1ad803322a904a250fa901020b4a4dfaf51a829 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 25 Jan 2012 22:07:05 +0100
Subject: [PATCH 018/202] sh: se7724: fix compile breakage

Fix compilation breakage

arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function)
make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1

caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API"
Also add other missing headers, even if compilation currently succeeds
because of their indirect inclusion via other headers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ap325rxa/setup.c | 1 +
 arch/sh/boards/mach-ecovec24/setup.c | 2 ++
 arch/sh/boards/mach-kfr2r09/setup.c  | 1 +
 arch/sh/boards/mach-migor/setup.c    | 2 ++
 arch/sh/boards/mach-se/7724/setup.c  | 1 +
 5 files changed, 7 insertions(+)

diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 6418e95c2b6b..ebd0f818a25f 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 033ef2ba621f..cde7c0085ced 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -29,9 +29,11 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 2a18b06abdaf..5b382e1afaea 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -22,6 +22,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 68c3d6f42896..d37ba2720527 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -21,9 +21,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 036fe1adaef1..2b07fc016950 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>

From 11c582e32c664f67e2518b9f97e6c91918617274 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 26 Jan 2012 17:44:05 +0900
Subject: [PATCH 019/202] sh: modify resource for SPI0 in setup-sh7757

The new spi-sh driver decodes the IORESOURCE_MEM_TYPE_MASK. So, the
resource needs the IORESOURCE_MEM_32BIT.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index a7b2da6b3a1a..226d80975408 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
 	[0] = {
 		.start	= 0xfe002000,
 		.end	= 0xfe0020ff,
-		.flags	= IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	},
 	[1] = {
 		.start	= 86,

From a206c0087323337595de1284feb09a98c2a389d2 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 26 Jan 2012 17:44:07 +0900
Subject: [PATCH 020/202] sh: add platform_device for SPI1 in setup-sh7757

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 226d80975408..2875e8be4f72 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= 54,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
 static struct resource usb_ehci_resources[] = {
 	[0] = {
 		.start	= 0xfe4f1000,
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&spi1_device,
 	&usb_ehci_device,
 	&usb_ohci_device,
 };

From d98456fcafa6f3fd1985f9b7429aaa3531c6bfa0 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Tue, 31 Jan 2012 20:27:41 -0500
Subject: [PATCH 021/202] Btrfs: don't reserve data with extents locked in
 btrfs_fallocate

btrfs_fallocate tries to allocate space only if ranges in the file don't
already exist.  But the enospc checks it does are not allowed with
extents locked.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/file.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 0f61e11a2998..0621a3a7d5d1 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1603,6 +1603,14 @@ static long btrfs_fallocate(struct file *file, int mode,
 	if (mode & ~FALLOC_FL_KEEP_SIZE)
 		return -EOPNOTSUPP;
 
+	/*
+	 * Make sure we have enough space before we do the
+	 * allocation.
+	 */
+	ret = btrfs_check_data_free_space(inode, len);
+	if (ret)
+		return ret;
+
 	/*
 	 * wait for ordered IO before we have any locks.  We'll loop again
 	 * below with the locks held.
@@ -1666,27 +1674,12 @@ static long btrfs_fallocate(struct file *file, int mode,
 		if (em->block_start == EXTENT_MAP_HOLE ||
 		    (cur_offset >= inode->i_size &&
 		     !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-
-			/*
-			 * Make sure we have enough space before we do the
-			 * allocation.
-			 */
-			ret = btrfs_check_data_free_space(inode, last_byte -
-							  cur_offset);
-			if (ret) {
-				free_extent_map(em);
-				break;
-			}
-
 			ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
 							last_byte - cur_offset,
 							1 << inode->i_blkbits,
 							offset + len,
 							&alloc_hint);
 
-			/* Let go of our reservation. */
-			btrfs_free_reserved_data_space(inode, last_byte -
-						       cur_offset);
 			if (ret < 0) {
 				free_extent_map(em);
 				break;
@@ -1714,6 +1707,8 @@ static long btrfs_fallocate(struct file *file, int mode,
 			     &cached_state, GFP_NOFS);
 out:
 	mutex_unlock(&inode->i_mutex);
+	/* Let go of our reservation. */
+	btrfs_free_reserved_data_space(inode, len);
 	return ret;
 }
 

From 331818f1c468a24e581aedcbe52af799366a9dfe Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Fri, 3 Feb 2012 18:30:53 -0500
Subject: [PATCH 022/202] NFSv4: Fix an Oops in the NFSv4 getacl code

Commit bf118a342f10dafe44b14451a1392c3254629a1f (NFSv4: include bitmap
in nfsv4 get acl data) introduces the 'acl_scratch' page for the case
where we may need to decode multi-page data. However it fails to take
into account the fact that the variable may be NULL (for the case where
we're not doing multi-page decode), and it also attaches it to the
encoding xdr_stream rather than the decoding one.

The immediate result is an Oops in nfs4_xdr_enc_getacl due to the
call to page_address() with a NULL page pointer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: stable@vger.kernel.org
---
 fs/nfs/nfs4proc.c       | 8 ++++----
 fs/nfs/nfs4xdr.c        | 5 ++++-
 include/linux/nfs_xdr.h | 2 +-
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index f0c849c98fe4..d202e04aca94 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3575,8 +3575,8 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu
 	}
 	if (npages > 1) {
 		/* for decoding across pages */
-		args.acl_scratch = alloc_page(GFP_KERNEL);
-		if (!args.acl_scratch)
+		res.acl_scratch = alloc_page(GFP_KERNEL);
+		if (!res.acl_scratch)
 			goto out_free;
 	}
 	args.acl_len = npages * PAGE_SIZE;
@@ -3612,8 +3612,8 @@ out_free:
 	for (i = 0; i < npages; i++)
 		if (pages[i])
 			__free_page(pages[i]);
-	if (args.acl_scratch)
-		__free_page(args.acl_scratch);
+	if (res.acl_scratch)
+		__free_page(res.acl_scratch);
 	return ret;
 }
 
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 95e92e438407..33bd8d0f745d 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -2522,7 +2522,6 @@ static void nfs4_xdr_enc_getacl(struct rpc_rqst *req, struct xdr_stream *xdr,
 
 	xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
 		args->acl_pages, args->acl_pgbase, args->acl_len);
-	xdr_set_scratch_buffer(xdr, page_address(args->acl_scratch), PAGE_SIZE);
 
 	encode_nops(&hdr);
 }
@@ -6032,6 +6031,10 @@ nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
 	struct compound_hdr hdr;
 	int status;
 
+	if (res->acl_scratch != NULL) {
+		void *p = page_address(res->acl_scratch);
+		xdr_set_scratch_buffer(xdr, p, PAGE_SIZE);
+	}
 	status = decode_compound_hdr(xdr, &hdr);
 	if (status)
 		goto out;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a764cef06b73..d6ba9a12591e 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -614,7 +614,6 @@ struct nfs_getaclargs {
 	size_t				acl_len;
 	unsigned int			acl_pgbase;
 	struct page **			acl_pages;
-	struct page *			acl_scratch;
 	struct nfs4_sequence_args 	seq_args;
 };
 
@@ -624,6 +623,7 @@ struct nfs_getaclres {
 	size_t				acl_len;
 	size_t				acl_data_offset;
 	int				acl_flags;
+	struct page *			acl_scratch;
 	struct nfs4_sequence_res	seq_res;
 };
 

From e0aac52e17a3db68fe2ceae281780a70fc69957f Mon Sep 17 00:00:00 2001
From: Simon Horman <horms@verge.net.au>
Date: Fri, 27 Jan 2012 10:45:27 +0900
Subject: [PATCH 023/202] ipvs: fix matching of fwmark templates during
 scheduling

	Commit f11017ec2d1859c661f4e2b12c4a8d250e1f47cf (2.6.37)
moved the fwmark variable in subcontext that is invalidated before
reaching the ip_vs_ct_in_get call. As vaddr is provided as pointer
in the param structure make sure the fwmark variable is in
same context. As the fwmark templates can not be matched,
more and more template connections are created and the
controlled connections can not go to single real server.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: stable@vger.kernel.org
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 611c3359b94d..2555816e7788 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -232,6 +232,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 	__be16 dport = 0;		/* destination port to forward */
 	unsigned int flags;
 	struct ip_vs_conn_param param;
+	const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
 	union nf_inet_addr snet;	/* source network of the client,
 					   after masking */
 
@@ -267,7 +268,6 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 	{
 		int protocol = iph.protocol;
 		const union nf_inet_addr *vaddr = &iph.daddr;
-		const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
 		__be16 vport = 0;
 
 		if (dst_port == svc->port) {

From 8b3262c00d6feccdccd6567d27687ae4b64c54bd Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Mon, 16 Jan 2012 16:46:04 +1000
Subject: [PATCH 024/202] m68knommu: fix syscall tracing stuck process

The return path from an exception was checking too many bits in the
thread_info->flags, and getting stuck calling do_signal(). There was
no work to do, we should only be checking the low 8 bits (as per comments
and definitions in arch/m68k/include/asm/thread_info.h).

This fixes the stuck process problem when using strace.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/platform/coldfire/entry.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 863889fc31c9..281e38c2b6c7 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -136,7 +136,7 @@ Luser_return:
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
@@ -148,8 +148,6 @@ Lwork_to_do:
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
-	/* GERG: do we need something here for TRACEing?? */
-
 Lsignal_return:
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK

From 57e00098cc0e43d001c9c8a018a1f8396faa0d16 Mon Sep 17 00:00:00 2001
From: Alexander Stein <alexander.stein@systec-electronic.com>
Date: Tue, 10 Jan 2012 14:06:07 +0100
Subject: [PATCH 025/202] m68k: Add shared bit to Coldfire kernel page entries

We had problems accessing our NOR flash trough mtd. The system always got
stuck at attaching UBI using ubiattach if booted from NFS or after mounting
squashfs as rootfs directly from NOR flash.
After some testing of the new changes introduced from v3.2-rc1 to v3.2-rc7
we had to apply the following patch to get mtd working again.

[gerg: The problem was ultimately caused by allocated kernel pages not having
the shared (SG) bit set. Without the SG bit set the MMU will look for page
matches incorporating the ASID as well. Things like module regions allocated
using vmalloc would fault when other processes run. ]

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcf_pgtable.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 756bde4fb4f8..3c793682e5d9 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -78,7 +78,8 @@
 				 | CF_PAGE_READABLE \
 				 | CF_PAGE_WRITABLE \
 				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
+				 | CF_PAGE_SYSTEM \
+				 | CF_PAGE_SHARED)
 
 #define PAGE_COPY	__pgprot(CF_PAGE_VALID \
 				 | CF_PAGE_ACCESSED \

From 3372f5a7d005dd42e754490fed6a0171c4a018c6 Mon Sep 17 00:00:00 2001
From: Alexander Stein <alexander.stein@systec-electronic.com>
Date: Mon, 23 Jan 2012 15:45:56 +0100
Subject: [PATCH 026/202] m68k: Do not set global share for non-kernel shared
 pages

If the SG bit is set in MMUTR the page is accessible for all
userspace processes (ignoring the ASID). So a process might randomly
access a page from a different process which had a shared page
(from shared memory) in its context.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/mm/mcfmmu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index babd5a97cdcb..875b800ef0dd 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -87,7 +87,7 @@ void __init paging_init(void)
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 {
-	unsigned long flags, mmuar;
+	unsigned long flags, mmuar, mmutr;
 	struct mm_struct *mm;
 	pgd_t *pgd;
 	pmd_t *pmd;
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
 		set_pte(pte, pte_wrprotect(*pte));
 
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+	mmu_write(MMUTR, mmutr);
 
 	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
 		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);

From 63ae37ea5186a6890a8968611180dc61118f719d Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 16 Nov 2011 10:54:02 -0300
Subject: [PATCH 027/202] [media] omap3isp: Fix crash caused by subdevs now
 having a pointer to devnodes

Commit 3e0ec41c5c5ee14e27f65e28d4a616de34f59a97 ("V4L: dynamically
allocate video_device nodes in subdevices") makes the
embedding video_device directly.

Fix accesses to the devnode accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap3isp/ispccdc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 3663834ca94c..ec62d11d678b 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1407,7 +1407,7 @@ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event)
 static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
 {
 	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
-	struct video_device *vdev = &ccdc->subdev.devnode;
+	struct video_device *vdev = ccdc->subdev.devnode;
 	struct v4l2_event event;
 
 	memset(&event, 0, sizeof(event));

From a8db7b2d197a0d624baab83f0c810b0edbc4ffd0 Mon Sep 17 00:00:00 2001
From: Florian Westphal <fw@strlen.de>
Date: Mon, 6 Feb 2012 13:23:10 +0100
Subject: [PATCH 028/202] netfilter: nf_queue: fix queueing of bridged gro skbs

When trying to nf_queue GRO/GSO skbs, nf_queue uses skb_gso_segment
to split the skb.

However, if nf_queue is called via bridge netfilter, the mac header
won't be preserved -- packets will thus contain a bogus mac header.

Fix this by setting skb->data to the mac header when skb->nf_bridge
is set and restoring skb->data afterwards for all segments.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 net/netfilter/nf_queue.c | 40 ++++++++++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 8 deletions(-)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index b3a7db678b8d..ce60cf0f6c11 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -203,6 +203,27 @@ err:
 	return status;
 }
 
+#ifdef CONFIG_BRIDGE_NETFILTER
+/* When called from bridge netfilter, skb->data must point to MAC header
+ * before calling skb_gso_segment(). Else, original MAC header is lost
+ * and segmented skbs will be sent to wrong destination.
+ */
+static void nf_bridge_adjust_skb_data(struct sk_buff *skb)
+{
+	if (skb->nf_bridge)
+		__skb_push(skb, skb->network_header - skb->mac_header);
+}
+
+static void nf_bridge_adjust_segmented_data(struct sk_buff *skb)
+{
+	if (skb->nf_bridge)
+		__skb_pull(skb, skb->network_header - skb->mac_header);
+}
+#else
+#define nf_bridge_adjust_skb_data(s) do {} while (0)
+#define nf_bridge_adjust_segmented_data(s) do {} while (0)
+#endif
+
 int nf_queue(struct sk_buff *skb,
 	     struct list_head *elem,
 	     u_int8_t pf, unsigned int hook,
@@ -212,7 +233,7 @@ int nf_queue(struct sk_buff *skb,
 	     unsigned int queuenum)
 {
 	struct sk_buff *segs;
-	int err;
+	int err = -EINVAL;
 	unsigned int queued;
 
 	if (!skb_is_gso(skb))
@@ -228,23 +249,25 @@ int nf_queue(struct sk_buff *skb,
 		break;
 	}
 
+	nf_bridge_adjust_skb_data(skb);
 	segs = skb_gso_segment(skb, 0);
 	/* Does not use PTR_ERR to limit the number of error codes that can be
 	 * returned by nf_queue.  For instance, callers rely on -ECANCELED to mean
 	 * 'ignore this hook'.
 	 */
 	if (IS_ERR(segs))
-		return -EINVAL;
-
+		goto out_err;
 	queued = 0;
 	err = 0;
 	do {
 		struct sk_buff *nskb = segs->next;
 
 		segs->next = NULL;
-		if (err == 0)
+		if (err == 0) {
+			nf_bridge_adjust_segmented_data(segs);
 			err = __nf_queue(segs, elem, pf, hook, indev,
 					   outdev, okfn, queuenum);
+		}
 		if (err == 0)
 			queued++;
 		else
@@ -252,11 +275,12 @@ int nf_queue(struct sk_buff *skb,
 		segs = nskb;
 	} while (segs);
 
-	/* also free orig skb if only some segments were queued */
-	if (unlikely(err && queued))
-		err = 0;
-	if (err == 0)
+	if (queued) {
 		kfree_skb(skb);
+		return 0;
+	}
+  out_err:
+	nf_bridge_adjust_segmented_data(skb);
 	return err;
 }
 

From b9f9a03150969e4bd9967c20bce67c4de769058f Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Thu, 9 Feb 2012 15:31:36 -0500
Subject: [PATCH 029/202] NFSv4: Ensure we throw out bad delegation stateids on
 NFS4ERR_BAD_STATEID

To ensure that we don't just reuse the bad delegation when we attempt to
recover the nfs4_state that received the bad stateid error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
---
 fs/nfs/nfs4state.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index a53f33b4ac3a..45392032e7bd 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1132,6 +1132,8 @@ void nfs4_schedule_stateid_recovery(const struct nfs_server *server, struct nfs4
 {
 	struct nfs_client *clp = server->nfs_client;
 
+	if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
+		nfs_async_inode_return_delegation(state->inode, &state->stateid);
 	nfs4_state_mark_reclaim_nograce(clp, state);
 	nfs4_schedule_state_manager(clp);
 }

From eae66b50c760233fad526edf4a0d327be17a055d Mon Sep 17 00:00:00 2001
From: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Wed, 8 Feb 2012 12:53:49 -0800
Subject: [PATCH 030/202] drm/i915: gen7: implement rczunit workaround

This is yet another workaround related to clock gating which we need on
Ivy Bridge.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h      | 1 +
 drivers/gpu/drm/i915/intel_display.c | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c3afb783cb9d..80fd6b5d4287 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3618,6 +3618,7 @@
 #define    GT_FIFO_NUM_RESERVED_ENTRIES		20
 
 #define GEN6_UCGCTL2				0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE		(1 << 13)
 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
 # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b3b51c43dad0..643c525b288c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8461,6 +8461,11 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
+	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 */
+	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
 	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
 
 	I915_WRITE(IVB_CHICKEN3,

From e4e0c058a19c41150d12ad2d3023b3cf09c5de67 Mon Sep 17 00:00:00 2001
From: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Wed, 8 Feb 2012 12:53:50 -0800
Subject: [PATCH 031/202] drm/i915: gen7: Implement an L3 caching workaround.

This adds two cache-related workarounds for Ivy Bridge which can lead to
3D ring hangs and corruptions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h      | 7 +++++++
 drivers/gpu/drm/i915/intel_display.c | 6 ++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 80fd6b5d4287..ca4737e5cdfd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3028,6 +3028,13 @@
 #define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
 #define  DISP_FBC_WM_DIS		(1<<15)
 
+/* GEN7 chicken */
+#define GEN7_L3CNTLREG1				0xB01C
+#define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER		0xB030
+#define  GEN7_WA_L3_CHICKEN_MODE				0x20000000
+
 /* PCH */
 
 /* south display engine interrupt */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 643c525b288c..928840aaeb06 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8472,6 +8472,12 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
 		   CHICKEN3_DGMG_DONE_FIX_DISABLE);
 
+	/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+	I915_WRITE(GEN7_L3CNTLREG1,
+			GEN7_WA_FOR_GEN7_L3_CONTROL);
+	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+			GEN7_WA_L3_CHICKEN_MODE);
+
 	for_each_pipe(pipe) {
 		I915_WRITE(DSPCNTR(pipe),
 			   I915_READ(DSPCNTR(pipe)) |

From db099c8f963fe656108e0a068274c5580a17f69b Mon Sep 17 00:00:00 2001
From: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Wed, 8 Feb 2012 12:53:51 -0800
Subject: [PATCH 032/202] drm/i915: gen7: work around a system hang on IVB

This adds the workaround for WaCatErrorRejectionIssue which could result
in a system hang.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h      | 4 ++++
 drivers/gpu/drm/i915/intel_display.c | 5 +++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ca4737e5cdfd..4e1ee909a80b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3035,6 +3035,10 @@
 #define GEN7_L3_CHICKEN_MODE_REGISTER		0xB030
 #define  GEN7_WA_L3_CHICKEN_MODE				0x20000000
 
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
+#define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
+
 /* PCH */
 
 /* south display engine interrupt */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 928840aaeb06..a5276150b8f8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8478,6 +8478,11 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
 			GEN7_WA_L3_CHICKEN_MODE);
 
+	/* This is required by WaCatErrorRejectionIssue */
+	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+			I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+			GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
 	for_each_pipe(pipe) {
 		I915_WRITE(DSPCNTR(pipe),
 			   I915_READ(DSPCNTR(pipe)) |

From d71de14ddf423ccc9a2e3f7e37553c99ead20d7c Mon Sep 17 00:00:00 2001
From: Kenneth Graunke <kenneth@whitecape.org>
Date: Wed, 8 Feb 2012 12:53:52 -0800
Subject: [PATCH 033/202] drm/i915: gen7: Disable the RHWO optimization as it
 can cause GPU hangs.

The BSpec Workarounds page states that bits 10 and 26 must be set to
avoid 3D ring hangs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h      | 3 +++
 drivers/gpu/drm/i915/intel_display.c | 4 ++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4e1ee909a80b..03c53fcf8653 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3029,6 +3029,9 @@
 #define  DISP_FBC_WM_DIS		(1<<15)
 
 /* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1		0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
+
 #define GEN7_L3CNTLREG1				0xB01C
 #define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C4FFF8C
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a5276150b8f8..d9b042b1d14d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8472,6 +8472,10 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
 		   CHICKEN3_DGMG_DONE_FIX_DISABLE);
 
+	/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+	I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+		   GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
 	/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
 	I915_WRITE(GEN7_L3CNTLREG1,
 			GEN7_WA_FOR_GEN7_L3_CONTROL);

From d9f5343e35d9138432657202afa8e3ddb2ade360 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 5 Jan 2012 16:28:54 -0800
Subject: [PATCH 034/202] USB: Remove duplicate USB 3.0 hub feature #defines.

Somehow we ended up with duplicate hub feature #defines in ch11.h.
Tatyana Brokhman first created the USB 3.0 hub feature macros in 2.6.38
with commit 0eadcc09203349b11ca477ec367079b23d32ab91 "usb: USB3.0 ch11
definitions".  In 2.6.39, I modified a patch from John Youn that added
similar macros in a different place in the same file, and committed
dbe79bbe9dcb22cb3651c46f18943477141ca452 "USB 3.0 Hub Changes".

Some of the #defines used different names for the same values.  Others
used exactly the same names with the same values, like these gems:

 #define USB_PORT_FEAT_BH_PORT_RESET     28
...
 #define USB_PORT_FEAT_BH_PORT_RESET            28

According to my very geeky husband (who looked it up in the C99 spec),
it is allowed to have object-like macros with duplicate names as long as
the replacement list is exactly the same.  However, he recalled that
some compilers will give warnings when they find duplicate macros.  It's
probably best to remove the duplicates in the stable tree, so that the
code compiles for everyone.

The macros are now fixed to move the feature requests that are specific
to USB 3.0 hubs into a new section (out of the USB 2.0 hub feature
section), and use the most common macro name.

This patch should be backported to 2.6.39.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Jamey Sharp <jamey@minilop.net>
Cc: stable@vger.kernel.org
---
 include/linux/usb/ch11.h | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 31fdb4c6ee3d..0b83acd3360a 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -61,12 +61,6 @@
 #define USB_PORT_FEAT_TEST              21
 #define USB_PORT_FEAT_INDICATOR         22
 #define USB_PORT_FEAT_C_PORT_L1         23
-#define USB_PORT_FEAT_C_PORT_LINK_STATE	25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET     28
-#define USB_PORT_FEAT_C_BH_PORT_RESET   29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
 
 /*
  * Port feature selectors added by USB 3.0 spec.
@@ -75,8 +69,8 @@
 #define USB_PORT_FEAT_LINK_STATE		5
 #define USB_PORT_FEAT_U1_TIMEOUT		23
 #define USB_PORT_FEAT_U2_TIMEOUT		24
-#define USB_PORT_FEAT_C_LINK_STATE		25
-#define USB_PORT_FEAT_C_CONFIG_ERR		26
+#define USB_PORT_FEAT_C_PORT_LINK_STATE		25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
 #define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
 #define USB_PORT_FEAT_BH_PORT_RESET		28
 #define USB_PORT_FEAT_C_BH_PORT_RESET		29

From 3278a55a1aebe2bbd47fbb5196209e5326a88b56 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 9 Feb 2012 14:43:44 -0800
Subject: [PATCH 035/202] xhci: Fix oops caused by more USB2 ports than USB3
 ports.

The code to set the device removable bits in the USB 2.0 roothub
descriptor was accidentally looking at the USB 3.0 port registers
instead of the USB 2.0 registers.  This can cause an oops if there are
more USB 2.0 registers than USB 3.0 registers.

This should be backported to kernels as old as 2.6.39, that contain the
commit 4bbb0ace9a3de8392527e3c87926309d541d3b00 "xhci: Return a USB 3.0
hub descriptor for USB3 roothub."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
---
 drivers/usb/host/xhci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 35e257f79c7b..557b6f32db86 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 	 */
 	memset(port_removable, 0, sizeof(port_removable));
 	for (i = 0; i < ports; i++) {
-		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
 		/* If a device is removable, PORTSC reports a 0, same as in the
 		 * hub descriptor DeviceRemovable bits.
 		 */

From 7fbd764881a5f9dc81a378293b7a74227fcc04ed Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Fri, 26 Aug 2011 00:36:23 +0400
Subject: [PATCH 036/202] [SCSI] mpt2sas: Fix mismatch in
 mpt2sas_base_hard_reset_handler() mutex lock-unlock

If ioc->pci_error_recovery is set, goto out in mpt2sas_base_hard_reset_handler()
leads to unlock unheld ioc->reset_in_progress_mutex.

The patch fixes the issue by jumping afer mutex_unlock() call.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 0b2c95583660..a78036f5e1a6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -4548,7 +4548,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 		printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
 		    ioc->name, __func__);
 		r = 0;
-		goto out;
+		goto out_unlocked;
 	}
 
 	if (mpt2sas_fwfault_debug)
@@ -4604,6 +4604,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 	mutex_unlock(&ioc->reset_in_progress_mutex);
 
+ out_unlocked:
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
 	    __func__));
 	return r;

From 05293485a0b6b1f803e8a3c0ff188c38f6969985 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Mon, 13 Feb 2012 20:51:05 +0000
Subject: [PATCH 037/202] XFS: xfs_trans_add_item() - don't assign in ASSERT()
 when compare is intended

It looks to me like the two ASSERT()s in xfs_trans_add_item() really
want to do a compare (==) rather than assignment (=).
This patch changes it from the latter to the former.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Ben Myers <bpm@sgi.com>
---
 fs/xfs/xfs_trans.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 329b06aba1c2..7adcdf15ae0c 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1151,8 +1151,8 @@ xfs_trans_add_item(
 {
 	struct xfs_log_item_desc *lidp;
 
-	ASSERT(lip->li_mountp = tp->t_mountp);
-	ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+	ASSERT(lip->li_mountp == tp->t_mountp);
+	ASSERT(lip->li_ailp == tp->t_mountp->m_ail);
 
 	lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
 

From afa159538af61f1a65d48927f4e949fe514fb4fc Mon Sep 17 00:00:00 2001
From: Janne Grunau <j@jannau.net>
Date: Thu, 2 Feb 2012 13:35:21 -0300
Subject: [PATCH 038/202] [media] hdpvr: fix race conditon during start of
 streaming

status has to be set to STREAMING before the streaming worker is
queued. hdpvr_transmit_buffers() will exit immediately otherwise.

Reported-by: Joerg Desch <vvd.joede@googlemail.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/hdpvr/hdpvr-video.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 087f7c08cb85..41fd57b6ccfb 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -283,12 +283,13 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 
 		hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
 
+		dev->status = STATUS_STREAMING;
+
 		INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
 		queue_work(dev->workqueue, &dev->worker);
 
 		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
 			 "streaming started\n");
-		dev->status = STATUS_STREAMING;
 
 		return 0;
 	}

From 68d07f64b8a11a852d48d1b05b724c3e20c0d94b Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Mon, 13 Feb 2012 16:25:57 -0800
Subject: [PATCH 039/202] USB: Don't fail USB3 probe on missing legacy PCI IRQ.

Intel has a PCI USB xhci host controller on a new platform. It doesn't
have a line IRQ definition in BIOS.  The Linux driver refuses to
initialize this controller, but Windows works well because it only depends
on MSI.

Actually, Linux also can work for MSI.  This patch avoids the line IRQ
checking for USB3 HCDs in usb core PCI probe.  It allows the xHCI driver
to try to enable MSI or MSI-X first.  It will fail the probe if MSI
enabling failed and there's no legacy PCI IRQ.

This patch should be backported to kernels as old as 2.6.32.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
---
 drivers/usb/core/hcd-pci.c | 5 ++++-
 drivers/usb/core/hcd.c     | 6 ++++--
 drivers/usb/host/xhci.c    | 5 +++++
 3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d136b8f4c8a7..81e2c0d9c17d 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
 
-	if (!dev->irq) {
+	/* The xHCI driver supports MSI and MSI-X,
+	 * so don't fail if the BIOS doesn't provide a legacy IRQ.
+	 */
+	if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
 		dev_err(&dev->dev,
 			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
 			pci_name(dev));
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index eb19cba34ac9..e1282328fc27 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
 		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
-	/* enable irqs just before we start the controller */
-	if (usb_hcd_is_primary_hcd(hcd)) {
+	/* enable irqs just before we start the controller,
+	 * if the BIOS provides legacy PCI irqs.
+	 */
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
 		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
 		if (retval)
 			goto err_request_irq;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6bbe3c3a7111..c939f5fdef9e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 		/* hcd->irq is -1, we have MSI */
 		return 0;
 
+	if (!pdev->irq) {
+		xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+		return -EINVAL;
+	}
+
 	/* fall back to legacy interrupt*/
 	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
 			hcd->irq_descr, hcd);

From 31794bc37bf2db84f085da52b72bfba65739b2d2 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 13 Feb 2012 22:00:47 -0800
Subject: [PATCH 040/202] ASoC: wm8962: Fix sidetone enumeration texts

The sidetone enumeration texts have left and right swapped.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
---
 sound/soc/codecs/wm8962.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 29c4b02c4790..0ac228b7dc04 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2564,7 +2564,7 @@ static int dsp2_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
-static const char *st_text[] = { "None", "Right", "Left" };
+static const char *st_text[] = { "None", "Left", "Right" };
 
 static const struct soc_enum str_enum =
 	SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);

From b9e44fe5ecda4158c22bc1ea4bffa378a4f83f65 Mon Sep 17 00:00:00 2001
From: "li.rui27@zte.com.cn" <li.rui27@zte.com.cn>
Date: Tue, 14 Feb 2012 10:35:01 +0800
Subject: [PATCH 041/202] USB: option: cleanup zte 3g-dongle's pid in option.c

  1. Remove all old mass-storage ids's pid:
     0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160;
  2. As the pid from 0x1401 to 0x1510 which have not surely assigned to
     use for serial-port or mass-storage port,so i think it should be
     removed now, and will re-add after it have assigned in future;
  3. sort the pid to WCDMA and CDMA.

Signed-off-by: Rui li <li.rui27@zte.com.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c | 143 ++++--------------------------------
 1 file changed, 13 insertions(+), 130 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 39ed1f46cec0..b54afceb9611 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -788,7 +788,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
@@ -803,7 +802,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
@@ -828,7 +826,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -836,7 +833,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
@@ -846,7 +842,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
@@ -865,8 +860,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
@@ -887,28 +880,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1083,127 +1066,27 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },

From 62e37ca78b1a4ca2eb77875bfd7ac63a7e068c67 Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Mon, 9 Jan 2012 11:00:32 -0700
Subject: [PATCH 042/202] Kbuild: Use dtc's -d (dependency) option

This hooks dtc into Kbuild's dependency system.

Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous
lack of this feature recently caused me to have very confusing "git
bisect" results.

For ARM, it's obvious what to add to $(targets). I'm not familiar enough
with other architectures to know what to add there. Powerpc appears to
already add various .dtb files into $(targets), but the other archs may
need something added to $(targets) to work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
---
 arch/c6x/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index ecca820e6041..6891257d514c 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -13,7 +13,7 @@ obj-y += linked_dtb.o
 endif
 
 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call cmd,dtc)
+	$(call if_changed_dep,dtc)
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)

From 08a183f02b5fef1cd78d27ffc8281fa96d79f814 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Tue, 14 Feb 2012 16:33:27 +0100
Subject: [PATCH 043/202] ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7
 architectures

This patch expands the Kconfig dependencies for ARM_LPAE to not allow
enabling when architectures other than ARMv7 are built into the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca2488164..7edef9121632 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the

From 6e2e340b59d2d4e7b6b7f2c2d02b0d5ca4df6458 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 14 Feb 2012 21:58:56 +0100
Subject: [PATCH 044/202] ARM: 7324/1: modpost: Fix section warnings for ARM
 for many compilers

It turns out that many compilers don't show section warnings on ARM
currently because handling for ARM_CALL relocs are missing from
modpost.c.

Based on commit c2e26114 ([ARM] 3205/1: Handle new EABI relocations when
loading kernel modules) it seems that R_ARM_PC24, R_ARM_CALL and
R_ARM_JUMP24 can be handled the same way.

Note that at least Debian libc6-dev is missing defines for both
R_ARM_CALL and R_ARM_JUMP24 in /usr/include/elf.h. So for now
we need to define them in modpost.c if not defined.

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 scripts/mod/modpost.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 2bd594e6d1b4..9adb667dd31a 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1494,6 +1494,13 @@ static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
 	return 0;
 }
 
+#ifndef R_ARM_CALL
+#define R_ARM_CALL	28
+#endif
+#ifndef R_ARM_JUMP24
+#define R_ARM_JUMP24	29
+#endif
+
 static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
 {
 	unsigned int r_typ = ELF_R_TYPE(r->r_info);
@@ -1505,6 +1512,8 @@ static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
 		              (elf->symtab_start + ELF_R_SYM(r->r_info));
 		break;
 	case R_ARM_PC24:
+	case R_ARM_CALL:
+	case R_ARM_JUMP24:
 		/* From ARM ABI: ((S + A) | T) - P */
 		r->r_addend = (int)(long)(elf->hdr +
 		              sechdr->sh_offset +

From 18daf1644e634bae951a6e3d4d19d89170209762 Mon Sep 17 00:00:00 2001
From: Peter Hurley <peter@hurleysoftware.com>
Date: Fri, 13 Jan 2012 15:11:30 +0100
Subject: [PATCH 045/202] Bluetooth: Fix l2cap conn failures for ssp devices

Commit 330605423c fixed l2cap conn establishment for non-ssp remote
devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security
is tested (which was always returning failure on any subsequent
security checks).

However, this broke l2cap conn establishment for ssp remote devices
when an ACL link was already established at SDP-level security. This
fix ensures that encryption must be pending whenever authentication
is also pending.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 net/bluetooth/hci_conn.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 3db432473ad5..07bc69ed9498 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -635,6 +635,10 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
 
 	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
 		struct hci_cp_auth_requested cp;
+
+		/* encrypt must be pending if auth is also pending */
+		set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
+
 		cp.handle = cpu_to_le16(conn->handle);
 		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
 							sizeof(cp), &cp);

From 19ad9e94f6e2b4b3e1feccfb2466eb6e3e5b8c2a Mon Sep 17 00:00:00 2001
From: Daniel Wagner <daniel.wagner@bmw-carit.de>
Date: Tue, 3 Jan 2012 11:53:53 +0100
Subject: [PATCH 046/202] Bluetooth: Don't mark non xfer isoc endpoint URBs
 with URB_ISO_ASAP

[ 2096.384084] btusb_send_frame:684: hci0
[ 2096.384087] usb 3-1: BOGUS urb flags, 2 --> 0
[ 2096.384091] Bluetooth: hci0 urb ffff8801b61d3a80 submission failed (22)

According the documentation in usb_submit_urb() URB_ISO_ASAP
flag is only allowed for endpoints of type USB_ENDPOINT_XFER_ISOC.

This reverts commit b8aabfc92249b239c425da7e4ca85b7e4855e984.

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 drivers/bluetooth/btusb.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f00f596c1029..b7c4f4e2e399 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -726,9 +726,6 @@ static int btusb_send_frame(struct sk_buff *skb)
 		usb_fill_bulk_urb(urb, data->udev, pipe,
 				skb->data, skb->len, btusb_tx_complete, skb);
 
-		if (skb->priority >= HCI_PRIO_MAX - 1)
-			urb->transfer_flags  = URB_ISO_ASAP;
-
 		hdev->stat.acl_tx++;
 		break;
 

From 4aa832c27edf902130f8bace1d42cf22468823fa Mon Sep 17 00:00:00 2001
From: Johan Hedberg <johan.hedberg@intel.com>
Date: Sun, 8 Jan 2012 22:51:16 +0200
Subject: [PATCH 047/202] Bluetooth: Remove bogus inline declaration from
 l2cap_chan_connect

As reported by Dan Carpenter this function causes a Sparse warning and
shouldn't be declared inline:

include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a
definition"

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
 include/net/bluetooth/l2cap.h | 2 +-
 net/bluetooth/l2cap_core.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 68f589150692..124f7cf45bd7 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -834,7 +834,7 @@ int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid);
 struct l2cap_chan *l2cap_chan_create(struct sock *sk);
 void l2cap_chan_close(struct l2cap_chan *chan, int reason);
 void l2cap_chan_destroy(struct l2cap_chan *chan);
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
 								bdaddr_t *dst);
 int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
 								u32 priority);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index faf0b11ac1d3..980abdb30671 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1120,7 +1120,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr
 	return c1;
 }
 
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
 {
 	struct sock *sk = chan->sk;
 	bdaddr_t *src = &bt_sk(sk)->src;

From a63752552b95624a9f1dfa3d763870f72f964ad0 Mon Sep 17 00:00:00 2001
From: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Date: Wed, 4 Jan 2012 12:10:41 +0100
Subject: [PATCH 048/202] Bluetooth: Fix sk_sndtimeo initialization for L2CAP
 socket

sk_sndtime value should be specified in jiffies thus initial value
needs to be converted from miliseconds. Otherwise this timeout is
unreliable when CONFIG_HZ is not set to 1000.

Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 net/bluetooth/l2cap_sock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index c61d967012b2..c57027f7606f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1002,7 +1002,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p
 	INIT_LIST_HEAD(&bt_sk(sk)->accept_q);
 
 	sk->sk_destruct = l2cap_sock_destruct;
-	sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT;
+	sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT);
 
 	sock_reset_flag(sk, SOCK_ZAPPED);
 

From 6e1da683f79a22fafaada62d547138daaa9e3456 Mon Sep 17 00:00:00 2001
From: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Date: Wed, 4 Jan 2012 12:10:42 +0100
Subject: [PATCH 049/202] Bluetooth: l2cap_set_timer needs jiffies as timeout
 value

After moving L2CAP timers to workqueues l2cap_set_timer expects timeout
value to be specified in jiffies but constants defined in miliseconds
are used. This makes timeouts unreliable when CONFIG_HZ is not set to
1000.

__set_chan_timer macro still uses jiffies as input to avoid multiple
conversions from/to jiffies for sk_sndtimeo value which is already
specified in jiffies.

Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Ackec-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 include/net/bluetooth/l2cap.h |  6 +++---
 net/bluetooth/l2cap_core.c    | 12 ++++++++----
 2 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 124f7cf45bd7..26486e182f55 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -626,13 +626,13 @@ static inline void l2cap_clear_timer(struct l2cap_chan *chan,
 #define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
 #define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer)
 #define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \
-		L2CAP_DEFAULT_RETRANS_TO);
+		msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
 #define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer)
 #define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \
-		L2CAP_DEFAULT_MONITOR_TO);
+		msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
 #define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer)
 #define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \
-		L2CAP_DEFAULT_ACK_TO);
+		msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
 #define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer)
 
 static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 980abdb30671..dcccae04ae08 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2970,7 +2970,8 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 
 	default:
 		sk->sk_err = ECONNRESET;
-		__set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
+		__set_chan_timer(chan,
+				msecs_to_jiffies(L2CAP_DISC_REJ_TIMEOUT));
 		l2cap_send_disconn_req(conn, chan, ECONNRESET);
 		goto done;
 	}
@@ -4478,7 +4479,8 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt)
 	if (encrypt == 0x00) {
 		if (chan->sec_level == BT_SECURITY_MEDIUM) {
 			__clear_chan_timer(chan);
-			__set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
+			__set_chan_timer(chan,
+					msecs_to_jiffies(L2CAP_ENC_TIMEOUT));
 		} else if (chan->sec_level == BT_SECURITY_HIGH)
 			l2cap_chan_close(chan, ECONNREFUSED);
 	} else {
@@ -4546,7 +4548,8 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
 					L2CAP_CONN_REQ, sizeof(req), &req);
 			} else {
 				__clear_chan_timer(chan);
-				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+				__set_chan_timer(chan,
+					msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
 			}
 		} else if (chan->state == BT_CONNECT2) {
 			struct l2cap_conn_rsp rsp;
@@ -4566,7 +4569,8 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
 				}
 			} else {
 				l2cap_state_change(chan, BT_DISCONN);
-				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+				__set_chan_timer(chan,
+					msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
 				res = L2CAP_CR_SEC_BLOCK;
 				stat = L2CAP_CS_NO_INFO;
 			}

From 331660637b4e5136602a98200a84f6b65ed8d5be Mon Sep 17 00:00:00 2001
From: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Date: Wed, 4 Jan 2012 11:57:17 -0300
Subject: [PATCH 050/202] Bluetooth: Fix using an absolute timeout on
 hci_conn_put()

queue_delayed_work() expects a relative time for when that work
should be scheduled.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 include/net/bluetooth/hci_core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ea9231f4935f..92b8fea553d7 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -561,7 +561,7 @@ static inline void hci_conn_put(struct hci_conn *conn)
 		}
 		cancel_delayed_work_sync(&conn->disc_work);
 		queue_delayed_work(conn->hdev->workqueue,
-					&conn->disc_work, jiffies + timeo);
+					&conn->disc_work, timeo);
 	}
 }
 

From b5a30dda6598af216c070165ece6068f9f00f33a Mon Sep 17 00:00:00 2001
From: Octavian Purdila <tavi.purdila@gmail.com>
Date: Sun, 22 Jan 2012 00:28:34 +0200
Subject: [PATCH 051/202] Bluetooth: silence lockdep warning

Since bluetooth uses multiple protocols types, to avoid lockdep
warnings, we need to use different lockdep classes (one for each
protocol type).

This is already done in bt_sock_create but it misses a couple of cases
when new connections are created. This patch corrects that to fix the
following warning:

<4>[ 1864.732366] =======================================================
<4>[ 1864.733030] [ INFO: possible circular locking dependency detected ]
<4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3
<4>[ 1864.733883] -------------------------------------------------------
<4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock:
<4>[ 1864.734869]  (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30
<4>[ 1864.735541]
<4>[ 1864.735549] but task is already holding lock:
<4>[ 1864.736045]  (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc
<4>[ 1864.736732]
<4>[ 1864.736740] which lock already depends on the new lock.
<4>[ 1864.736750]
<4>[ 1864.737428]
<4>[ 1864.737437] the existing dependency chain (in reverse order) is:
<4>[ 1864.738016]
<4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}:
<4>[ 1864.738549]        [<c1062273>] lock_acquire+0x104/0x140
<4>[ 1864.738977]        [<c13d35c1>] lock_sock_nested+0x58/0x68
<4>[ 1864.739411]        [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76
<4>[ 1864.739858]        [<c13d06c3>] __sock_sendmsg+0x50/0x59
<4>[ 1864.740279]        [<c13d0ea2>] sock_sendmsg+0x94/0xa8
<4>[ 1864.740687]        [<c13d0ede>] kernel_sendmsg+0x28/0x37
<4>[ 1864.741106]        [<c14969ca>] rfcomm_send_frame+0x30/0x38
<4>[ 1864.741542]        [<c1496a2a>] rfcomm_send_ua+0x58/0x5a
<4>[ 1864.741959]        [<c1498447>] rfcomm_run+0x441/0xb52
<4>[ 1864.742365]        [<c104f095>] kthread+0x63/0x68
<4>[ 1864.742742]        [<c14d5182>] kernel_thread_helper+0x6/0xd
<4>[ 1864.743187]
<4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}:
<4>[ 1864.743667]        [<c1061ada>] __lock_acquire+0x988/0xc00
<4>[ 1864.744100]        [<c1062273>] lock_acquire+0x104/0x140
<4>[ 1864.744519]        [<c14d2c70>] __mutex_lock_common+0x3b/0x33f
<4>[ 1864.744975]        [<c14d303e>] mutex_lock_nested+0x2d/0x36
<4>[ 1864.745412]        [<c14970ea>] rfcomm_dlc_close+0x15/0x30
<4>[ 1864.745842]        [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b
<4>[ 1864.746288]        [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62
<4>[ 1864.746737]        [<c13d275d>] sys_socketcall+0x1db/0x422
<4>[ 1864.747165]        [<c14d42f0>] syscall_call+0x7/0xb

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 include/net/bluetooth/bluetooth.h |  2 ++
 net/bluetooth/af_bluetooth.c      | 12 +++++-------
 net/bluetooth/l2cap_sock.c        |  2 ++
 net/bluetooth/rfcomm/sock.c       |  2 ++
 4 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index abaad6ed9b83..4a82ca0bb0b2 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -256,4 +256,6 @@ void l2cap_exit(void);
 int sco_init(void);
 void sco_exit(void);
 
+void bt_sock_reclassify_lock(struct sock *sk, int proto);
+
 #endif /* __BLUETOOTH_H */
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index ef92864ac625..72eb187a5f60 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -71,19 +71,16 @@ static const char *const bt_slock_key_strings[BT_MAX_PROTO] = {
 	"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
 };
 
-static inline void bt_sock_reclassify_lock(struct socket *sock, int proto)
+void bt_sock_reclassify_lock(struct sock *sk, int proto)
 {
-	struct sock *sk = sock->sk;
-
-	if (!sk)
-		return;
-
+	BUG_ON(!sk);
 	BUG_ON(sock_owned_by_user(sk));
 
 	sock_lock_init_class_and_name(sk,
 			bt_slock_key_strings[proto], &bt_slock_key[proto],
 				bt_key_strings[proto], &bt_lock_key[proto]);
 }
+EXPORT_SYMBOL(bt_sock_reclassify_lock);
 
 int bt_sock_register(int proto, const struct net_proto_family *ops)
 {
@@ -145,7 +142,8 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto,
 
 	if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
 		err = bt_proto[proto]->create(net, sock, proto, kern);
-		bt_sock_reclassify_lock(sock, proto);
+		if (!err)
+			bt_sock_reclassify_lock(sock->sk, proto);
 		module_put(bt_proto[proto]->owner);
 	}
 
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index c57027f7606f..401d9428ae4c 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -849,6 +849,8 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(void *data)
 	if (!sk)
 		return NULL;
 
+	bt_sock_reclassify_lock(sk, BTPROTO_L2CAP);
+
 	l2cap_sock_init(sk, parent);
 
 	return l2cap_pi(sk)->chan;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index f066678faeee..22169c3f1482 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -956,6 +956,8 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc *
 	if (!sk)
 		goto done;
 
+	bt_sock_reclassify_lock(sk, BTPROTO_RFCOMM);
+
 	rfcomm_sock_init(sk, parent);
 	bacpy(&bt_sk(sk)->src, &src);
 	bacpy(&bt_sk(sk)->dst, &dst);

From a51cd2be864a3cc0272359b1995e213341dfc7e7 Mon Sep 17 00:00:00 2001
From: Andre Guedes <andre.guedes@openbossa.org>
Date: Fri, 27 Jan 2012 19:42:02 -0300
Subject: [PATCH 052/202] Bluetooth: Fix potential deadlock

We don't need to use the _sync variant in hci_conn_hold and
hci_conn_put to cancel conn->disc_work delayed work. This way
we avoid potential deadlocks like this one reported by lockdep.

======================================================
[ INFO: possible circular locking dependency detected ]
3.2.0+ #1 Not tainted
-------------------------------------------------------
kworker/u:1/17 is trying to acquire lock:
 (&hdev->lock){+.+.+.}, at: [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth]

but task is already holding lock:
 ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 ((&(&conn->disc_work)->work)){+.+...}:
       [<ffffffff81057444>] lock_acquire+0x8a/0xa7
       [<ffffffff81034ed1>] wait_on_work+0x3d/0xaa
       [<ffffffff81035b54>] __cancel_work_timer+0xac/0xef
       [<ffffffff81035ba4>] cancel_delayed_work_sync+0xd/0xf
       [<ffffffffa00554b0>] smp_chan_create+0xde/0xe6 [bluetooth]
       [<ffffffffa0056160>] smp_conn_security+0xa3/0x12d [bluetooth]
       [<ffffffffa0053640>] l2cap_connect_cfm+0x237/0x2e8 [bluetooth]
       [<ffffffffa004239c>] hci_proto_connect_cfm+0x2d/0x6f [bluetooth]
       [<ffffffffa0046ea5>] hci_event_packet+0x29d1/0x2d60 [bluetooth]
       [<ffffffffa003dde3>] hci_rx_work+0xd0/0x2e1 [bluetooth]
       [<ffffffff810357af>] process_one_work+0x178/0x2bf
       [<ffffffff81036178>] worker_thread+0xce/0x152
       [<ffffffff81039a03>] kthread+0x95/0x9d
       [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10

-> #1 (slock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}:
       [<ffffffff81057444>] lock_acquire+0x8a/0xa7
       [<ffffffff812e553a>] _raw_spin_lock_bh+0x36/0x6a
       [<ffffffff81244d56>] lock_sock_nested+0x24/0x7f
       [<ffffffffa004d96f>] lock_sock+0xb/0xd [bluetooth]
       [<ffffffffa0052906>] l2cap_chan_connect+0xa9/0x26f [bluetooth]
       [<ffffffffa00545f8>] l2cap_sock_connect+0xb3/0xff [bluetooth]
       [<ffffffff81243b48>] sys_connect+0x69/0x8a
       [<ffffffff812e6579>] system_call_fastpath+0x16/0x1b

-> #0 (&hdev->lock){+.+.+.}:
       [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74
       [<ffffffff81057444>] lock_acquire+0x8a/0xa7
       [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e
       [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31
       [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth]
       [<ffffffff810357af>] process_one_work+0x178/0x2bf
       [<ffffffff81036178>] worker_thread+0xce/0x152
       [<ffffffff81039a03>] kthread+0x95/0x9d
       [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10

other info that might help us debug this:

Chain exists of:
  &hdev->lock --> slock-AF_BLUETOOTH-BTPROTO_L2CAP --> (&(&conn->disc_work)->work)

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((&(&conn->disc_work)->work));
                               lock(slock-AF_BLUETOOTH-BTPROTO_L2CAP);
                               lock((&(&conn->disc_work)->work));
  lock(&hdev->lock);

 *** DEADLOCK ***

2 locks held by kworker/u:1/17:
 #0:  (hdev->name){.+.+.+}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf
 #1:  ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf

stack backtrace:
Pid: 17, comm: kworker/u:1 Not tainted 3.2.0+ #1
Call Trace:
 [<ffffffff812e06c6>] print_circular_bug+0x1f8/0x209
 [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74
 [<ffffffff81021ef2>] ? arch_local_irq_restore+0x6/0xd
 [<ffffffff81022bc7>] ? vprintk+0x3f9/0x41e
 [<ffffffff81057444>] lock_acquire+0x8a/0xa7
 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth]
 [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e
 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth]
 [<ffffffff81190fd6>] ? __dynamic_pr_debug+0x6d/0x6f
 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth]
 [<ffffffff8105320f>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31
 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth]
 [<ffffffff810357af>] process_one_work+0x178/0x2bf
 [<ffffffff81035751>] ? process_one_work+0x11a/0x2bf
 [<ffffffff81055af3>] ? lock_acquired+0x1d0/0x1df
 [<ffffffffa00410f3>] ? hci_acl_disconn+0x65/0x65 [bluetooth]
 [<ffffffff81036178>] worker_thread+0xce/0x152
 [<ffffffff810407ed>] ? finish_task_switch+0x45/0xc5
 [<ffffffff810360aa>] ? manage_workers.isra.25+0x16a/0x16a
 [<ffffffff81039a03>] kthread+0x95/0x9d
 [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10
 [<ffffffff812e5db4>] ? retint_restore_args+0x13/0x13
 [<ffffffff8103996e>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff812e7750>] ? gs_change+0x13/0x13

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 include/net/bluetooth/hci_core.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 92b8fea553d7..453893b3120e 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -540,7 +540,7 @@ void hci_conn_put_device(struct hci_conn *conn);
 static inline void hci_conn_hold(struct hci_conn *conn)
 {
 	atomic_inc(&conn->refcnt);
-	cancel_delayed_work_sync(&conn->disc_work);
+	cancel_delayed_work(&conn->disc_work);
 }
 
 static inline void hci_conn_put(struct hci_conn *conn)
@@ -559,7 +559,7 @@ static inline void hci_conn_put(struct hci_conn *conn)
 		} else {
 			timeo = msecs_to_jiffies(10);
 		}
-		cancel_delayed_work_sync(&conn->disc_work);
+		cancel_delayed_work(&conn->disc_work);
 		queue_delayed_work(conn->hdev->workqueue,
 					&conn->disc_work, timeo);
 	}

From cf33e77b76d7439f21a23a94eab4ab3b405a6a7d Mon Sep 17 00:00:00 2001
From: Octavian Purdila <octavian.purdila@intel.com>
Date: Fri, 27 Jan 2012 19:32:39 +0200
Subject: [PATCH 053/202] Bluetooth: Fix RFCOMM session reference counting
 issue

There is an imbalance in the rfcomm_session_hold / rfcomm_session_put
operations which causes the following crash:

[  685.010159] BUG: unable to handle kernel paging request at 6b6b6b6b
[  685.010169] IP: [<c149d76d>] rfcomm_process_dlcs+0x1b/0x15e
[  685.010181] *pdpt = 000000002d665001 *pde = 0000000000000000
[  685.010191] Oops: 0000 [#1] PREEMPT SMP
[  685.010247]
[  685.010255] Pid: 947, comm: krfcommd Tainted: G         C  3.0.16-mid8-dirty #44
[  685.010266] EIP: 0060:[<c149d76d>] EFLAGS: 00010246 CPU: 1
[  685.010274] EIP is at rfcomm_process_dlcs+0x1b/0x15e
[  685.010281] EAX: e79f551c EBX: 6b6b6b6b ECX: 00000007 EDX: e79f40b4
[  685.010288] ESI: e79f4060 EDI: ed4e1f70 EBP: ed4e1f68 ESP: ed4e1f50
[  685.010295]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  685.010303] Process krfcommd (pid: 947, ti=ed4e0000 task=ed43e5e0 task.ti=ed4e0000)
[  685.010308] Stack:
[  685.010312]  ed4e1f68 c149eb53 e5925150 e79f4060 ed500000 ed4e1f70 ed4e1f80 c149ec10
[  685.010331]  00000000 ed43e5e0 00000000 ed4e1f90 ed4e1f9c c149ec87 0000bf54 00000000
[  685.010348]  00000000 ee03bf54 c149ec37 ed4e1fe4 c104fe01 00000000 00000000 00000000
[  685.010367] Call Trace:
[  685.010376]  [<c149eb53>] ? rfcomm_process_rx+0x6e/0x74
[  685.010387]  [<c149ec10>] rfcomm_process_sessions+0xb7/0xde
[  685.010398]  [<c149ec87>] rfcomm_run+0x50/0x6d
[  685.010409]  [<c149ec37>] ? rfcomm_process_sessions+0xde/0xde
[  685.010419]  [<c104fe01>] kthread+0x63/0x68
[  685.010431]  [<c104fd9e>] ? __init_kthread_worker+0x42/0x42
[  685.010442]  [<c14dae82>] kernel_thread_helper+0x6/0xd

This issue has been brought up earlier here:

https://lkml.org/lkml/2011/5/21/127

The issue appears to be the rfcomm_session_put in rfcomm_recv_ua. This
operation doesn't seem be to required as for the non-initiator case we
have the rfcomm_process_rx doing an explicit put and in the initiator
case the last dlc_unlink will drive the reference counter to 0.

There have been several attempts to fix these issue:

6c2718d Bluetooth: Do not call rfcomm_session_put() for RFCOMM UA on closed socket
683d949 Bluetooth: Never deallocate a session when some DLC points to it

but AFAICS they do not fix the issue just make it harder to reproduce.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Gopala Krishna Murala <gopala.krishna.murala@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 net/bluetooth/rfcomm/core.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 501649bf5596..8a602388f1e7 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1164,12 +1164,18 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci)
 			break;
 
 		case BT_DISCONN:
-			/* When socket is closed and we are not RFCOMM
-			 * initiator rfcomm_process_rx already calls
-			 * rfcomm_session_put() */
-			if (s->sock->sk->sk_state != BT_CLOSED)
-				if (list_empty(&s->dlcs))
-					rfcomm_session_put(s);
+			/* rfcomm_session_put is called later so don't do
+			 * anything here otherwise we will mess up the session
+			 * reference counter:
+			 *
+			 * (a) when we are the initiator dlc_unlink will drive
+			 * the reference counter to 0 (there is no initial put
+			 * after session_add)
+			 *
+			 * (b) when we are not the initiator rfcomm_rx_process
+			 * will explicitly call put to balance the initial hold
+			 * done after session add.
+			 */
 			break;
 		}
 	}

From ca0d6c7ece0e78268cd7c5c378d6b1b610625085 Mon Sep 17 00:00:00 2001
From: Johan Hedberg <johan.hedberg@intel.com>
Date: Fri, 3 Feb 2012 21:29:40 +0200
Subject: [PATCH 054/202] Bluetooth: Add missing QUIRK_NO_RESET test to
 hci_dev_do_close

We should only perform a reset in hci_dev_do_close if the
HCI_QUIRK_NO_RESET flag is set (since in such a case a reset will not be
performed when initializing the device).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
 net/bluetooth/hci_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 9de93714213a..5aeb62491198 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -640,7 +640,8 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 	/* Reset device */
 	skb_queue_purge(&hdev->cmd_q);
 	atomic_set(&hdev->cmd_cnt, 1);
-	if (!test_bit(HCI_RAW, &hdev->flags)) {
+	if (!test_bit(HCI_RAW, &hdev->flags) &&
+				test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
 		set_bit(HCI_INIT, &hdev->flags);
 		__hci_request(hdev, hci_reset_req, 0,
 					msecs_to_jiffies(250));

From 403f048a57050add364827fb3e2650af86463168 Mon Sep 17 00:00:00 2001
From: Manoj Iyer <manoj.iyer@canonical.com>
Date: Thu, 2 Feb 2012 09:32:36 -0600
Subject: [PATCH 055/202] Bluetooth: btusb: Add vendor specific ID (0a5c 21f3)
 for BCM20702A0

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f3 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=74DE2B344A7B
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Dennis Chua <dennis.chua@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b7c4f4e2e399..789c9b579aea 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
 
 	/* Broadcom BCM20702A0 */
 	{ USB_DEVICE(0x0a5c, 0x21e3) },
+	{ USB_DEVICE(0x0a5c, 0x21f3) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
 	{ }	/* Terminating entry */

From 6de32750822d00bfa92c341166132b0714c5b559 Mon Sep 17 00:00:00 2001
From: Ulisses Furquim <ulisses@profusion.mobi>
Date: Mon, 30 Jan 2012 18:26:28 -0200
Subject: [PATCH 056/202] Bluetooth: Remove usage of __cancel_delayed_work()

__cancel_delayed_work() is being used in some paths where we cannot
sleep waiting for the delayed work to finish. However, that function
might return while the timer is running and the work will be queued
again. Replace the calls with safer cancel_delayed_work() version
which spins until the timer handler finishes on other CPUs and
cancels the delayed work.

Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 include/net/bluetooth/l2cap.h | 4 ++--
 net/bluetooth/l2cap_core.c    | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 26486e182f55..b1664ed884e6 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -611,7 +611,7 @@ static inline void l2cap_set_timer(struct l2cap_chan *chan,
 {
 	BT_DBG("chan %p state %d timeout %ld", chan, chan->state, timeout);
 
-	if (!__cancel_delayed_work(work))
+	if (!cancel_delayed_work(work))
 		l2cap_chan_hold(chan);
 	schedule_delayed_work(work, timeout);
 }
@@ -619,7 +619,7 @@ static inline void l2cap_set_timer(struct l2cap_chan *chan,
 static inline void l2cap_clear_timer(struct l2cap_chan *chan,
 					struct delayed_work *work)
 {
-	if (__cancel_delayed_work(work))
+	if (cancel_delayed_work(work))
 		l2cap_chan_put(chan);
 }
 
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index dcccae04ae08..ec10c698b891 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2574,7 +2574,7 @@ static inline int l2cap_command_rej(struct l2cap_conn *conn, struct l2cap_cmd_hd
 
 	if ((conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) &&
 					cmd->ident == conn->info_ident) {
-		__cancel_delayed_work(&conn->info_timer);
+		cancel_delayed_work(&conn->info_timer);
 
 		conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
 		conn->info_ident = 0;
@@ -3121,7 +3121,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm
 			conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
 		return 0;
 
-	__cancel_delayed_work(&conn->info_timer);
+	cancel_delayed_work(&conn->info_timer);
 
 	if (result != L2CAP_IR_SUCCESS) {
 		conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
@@ -4501,7 +4501,7 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
 
 	if (hcon->type == LE_LINK) {
 		smp_distribute_keys(conn, 0);
-		__cancel_delayed_work(&conn->security_timer);
+		cancel_delayed_work(&conn->security_timer);
 	}
 
 	rcu_read_lock();

From 24d2b8c0ac5c8ec41c26ed432238b0e027184882 Mon Sep 17 00:00:00 2001
From: Ulisses Furquim <ulisses@profusion.mobi>
Date: Mon, 30 Jan 2012 18:26:29 -0200
Subject: [PATCH 057/202] Bluetooth: Fix possible use after free in delete path

We need to use the _sync() version for cancelling the info and security
timer in the L2CAP connection delete path. Otherwise the delayed work
handler might run after the connection object is freed.

Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
 net/bluetooth/l2cap_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index ec10c698b891..32d338c30e65 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1018,10 +1018,10 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
 	hci_chan_del(conn->hchan);
 
 	if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
-		__cancel_delayed_work(&conn->info_timer);
+		cancel_delayed_work_sync(&conn->info_timer);
 
 	if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &hcon->pend)) {
-		__cancel_delayed_work(&conn->security_timer);
+		cancel_delayed_work_sync(&conn->security_timer);
 		smp_chan_destroy(conn);
 	}
 

From 8866f405efd4171f9d9c91901d2dd02f01bacb60 Mon Sep 17 00:00:00 2001
From: Xi Wang <xi.wang@gmail.com>
Date: Tue, 14 Feb 2012 05:18:48 -0500
Subject: [PATCH 058/202] ALSA: usb-audio: avoid integer overflow in
 create_fixed_stream_quirk()

A malicious USB device could feed in a large nr_rates value.  This would
cause the subsequent call to kmemdup() to allocate a smaller buffer than
expected, leading to out-of-bounds access.

This patch validates the nr_rates value and reuses the limit introduced
in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow
in parse_uac2_sample_rate_range()").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.h   | 1 +
 sound/usb/format.c | 4 +---
 sound/usb/quirks.c | 6 +++++-
 3 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/usb/card.h b/sound/usb/card.h
index a39edcc32a93..da5fa1ac4eda 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -1,6 +1,7 @@
 #ifndef __USBAUDIO_CARD_H
 #define __USBAUDIO_CARD_H
 
+#define MAX_NR_RATES	1024
 #define MAX_PACKS	20
 #define MAX_PACKS_HS	(MAX_PACKS * 8)	/* in high speed mode */
 #define MAX_URBS	8
diff --git a/sound/usb/format.c b/sound/usb/format.c
index e09aba19375c..ddfef57c4c9f 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -209,8 +209,6 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 	return 0;
 }
 
-#define MAX_UAC2_NR_RATES 1024
-
 /*
  * Helper function to walk the array of sample rate triplets reported by
  * the device. The problem is that we need to parse whole array first to
@@ -255,7 +253,7 @@ static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
 			fp->rates |= snd_pcm_rate_to_rate_bit(rate);
 
 			nr_rates++;
-			if (nr_rates >= MAX_UAC2_NR_RATES) {
+			if (nr_rates >= MAX_NR_RATES) {
 				snd_printk(KERN_ERR "invalid uac2 rates\n");
 				break;
 			}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index a3ddac0deffd..27817266867a 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -132,10 +132,14 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
 	unsigned *rate_table = NULL;
 
 	fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
-	if (! fp) {
+	if (!fp) {
 		snd_printk(KERN_ERR "cannot memdup\n");
 		return -ENOMEM;
 	}
+	if (fp->nr_rates > MAX_NR_RATES) {
+		kfree(fp);
+		return -EINVAL;
+	}
 	if (fp->nr_rates > 0) {
 		rate_table = kmemdup(fp->rate_table,
 				     sizeof(int) * fp->nr_rates, GFP_KERNEL);

From bab6f610640a92b6b40e6b732f520a6e0c85dbbe Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@xenotime.net>
Date: Thu, 2 Feb 2012 14:40:30 -0300
Subject: [PATCH 059/202] [media] wl128x: fix build errors when GPIOLIB is not
 enabled

From: Randy Dunlap <rdunlap@xenotime.net>

Fix wl128x Kconfig to depend on GPIOLIB since TI_ST also
depends on GPIOLIB.

(.text+0xe6d60): undefined reference to `st_register'
(.text+0xe7016): undefined reference to `st_unregister'
(.text+0xe70ce): undefined reference to `st_unregister'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Manjunatha Halli <manjunatha_halli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/wl128x/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig
index 86b28579f0c7..ea1e6545df36 100644
--- a/drivers/media/radio/wl128x/Kconfig
+++ b/drivers/media/radio/wl128x/Kconfig
@@ -4,8 +4,8 @@
 menu "Texas Instruments WL128x FM driver (ST based)"
 config RADIO_WL128X
 	tristate "Texas Instruments WL128x FM Radio"
-	depends on VIDEO_V4L2 && RFKILL
-	select TI_ST if NET && GPIOLIB
+	depends on VIDEO_V4L2 && RFKILL && GPIOLIB
+	select TI_ST if NET
 	help
 	Choose Y here if you have this FM radio chip.
 

From fda27874de91d5a8b9a018b3bc74b14578994908 Mon Sep 17 00:00:00 2001
From: Taylor Ralph <taylor.ralph@gmail.com>
Date: Thu, 20 Oct 2011 23:33:23 -0300
Subject: [PATCH 060/202] [media] hdpvr: update picture controls to support
 firmware versions > 0.15

Correctly sets the max/min/default values for the hdpvr picture
controls. The reason the current values didn't cause a problem until now
is because any firmware <= 0.15 didn't support them. The latest firmware
releases properly support picture controls and the values in the patch
are derived from the windows driver using SniffUSB2.0.

Thanks to Devin Heitmueller for helping me.

Signed-off-by: Taylor Ralph <tralph@mythtv.org>
Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/hdpvr/hdpvr-core.c  | 20 +++++++++---
 drivers/media/video/hdpvr/hdpvr-video.c | 43 ++++++++++++++++++-------
 drivers/media/video/hdpvr/hdpvr.h       |  1 +
 3 files changed, 48 insertions(+), 16 deletions(-)

diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 441dacf642bb..687282d87491 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -154,10 +154,20 @@ static int device_authorization(struct hdpvr_device *dev)
 	}
 #endif
 
-	v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
-			  dev->usbc_buf[1], &dev->usbc_buf[2]);
+	dev->fw_ver = dev->usbc_buf[1];
 
-	switch (dev->usbc_buf[1]) {
+	v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
+			  dev->fw_ver, &dev->usbc_buf[2]);
+
+	if (dev->fw_ver > 0x15) {
+		dev->options.brightness	= 0x80;
+		dev->options.contrast	= 0x40;
+		dev->options.hue	= 0xf;
+		dev->options.saturation	= 0x40;
+		dev->options.sharpness	= 0x80;
+	}
+
+	switch (dev->fw_ver) {
 	case HDPVR_FIRMWARE_VERSION:
 		dev->flags &= ~HDPVR_FLAG_AC3_CAP;
 		break;
@@ -169,7 +179,7 @@ static int device_authorization(struct hdpvr_device *dev)
 	default:
 		v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
 			  " not work.\n");
-		if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3)
+		if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
 			dev->flags |= HDPVR_FLAG_AC3_CAP;
 		else
 			dev->flags &= ~HDPVR_FLAG_AC3_CAP;
@@ -270,6 +280,8 @@ static const struct hdpvr_options hdpvr_default_options = {
 	.bitrate_mode	= HDPVR_CONSTANT,
 	.gop_mode	= HDPVR_SIMPLE_IDR_GOP,
 	.audio_codec	= V4L2_MPEG_AUDIO_ENCODING_AAC,
+	/* original picture controls for firmware version <= 0x15 */
+	/* updated in device_authorization() for newer firmware */
 	.brightness	= 0x86,
 	.contrast	= 0x80,
 	.hue		= 0x80,
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 41fd57b6ccfb..11ffe9cc1780 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -723,21 +723,39 @@ static const s32 supported_v4l2_ctrls[] = {
 };
 
 static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc,
-			  int ac3)
+			  int ac3, int fw_ver)
 {
 	int err;
 
+	if (fw_ver > 0x15) {
+		switch (qc->id) {
+		case V4L2_CID_BRIGHTNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_CONTRAST:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+		case V4L2_CID_SATURATION:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+		case V4L2_CID_HUE:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf);
+		case V4L2_CID_SHARPNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		}
+	} else {
+		switch (qc->id) {
+		case V4L2_CID_BRIGHTNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
+		case V4L2_CID_CONTRAST:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_SATURATION:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_HUE:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_SHARPNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		}
+	}
+
 	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_SHARPNESS:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
 	case V4L2_CID_MPEG_AUDIO_ENCODING:
 		return v4l2_ctrl_query_fill(
 			qc, V4L2_MPEG_AUDIO_ENCODING_AAC,
@@ -795,7 +813,8 @@ static int vidioc_queryctrl(struct file *file, void *private_data,
 
 		if (qc->id == supported_v4l2_ctrls[i])
 			return fill_queryctrl(&dev->options, qc,
-					      dev->flags & HDPVR_FLAG_AC3_CAP);
+					      dev->flags & HDPVR_FLAG_AC3_CAP,
+					      dev->fw_ver);
 
 		if (qc->id < supported_v4l2_ctrls[i])
 			break;
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index d6439db1d18b..fea3c6926997 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -113,6 +113,7 @@ struct hdpvr_device {
 	/* usb control transfer buffer and lock */
 	struct mutex		usbc_mutex;
 	u8			*usbc_buf;
+	u8			fw_ver;
 };
 
 static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev)

From 941b2ddf71987ef369389517a7e215dd505fe01e Mon Sep 17 00:00:00 2001
From: Keith Mannthey <kmannth@us.ibm.com>
Date: Tue, 29 Nov 2011 17:44:12 -0800
Subject: [PATCH 061/202] btrfs: Sector Size check during Mount

Gracefully fail when trying to mount a BTRFS file system that has a
sectorsize smaller than PAGE_SIZE.

On PPC it is possible to build a FS while using a 4k PAGE_SIZE kernel
then boot into a 64K PAGE_SIZE kernel.  Presently open_ctree fails in an
endless loop and hangs the machine in this situation.

My debugging has show this Sector size < Page size to be a non trivial
situation and a graceful exit from the situation would be nice for the
time being.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
---
 fs/btrfs/disk-io.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 4c867112b4c8..58d0678dfcba 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2258,6 +2258,12 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 		goto fail_sb_buffer;
 	}
 
+	if (sectorsize < PAGE_SIZE) {
+		printk(KERN_WARNING "btrfs: Incompatible sector size "
+		       "found on %s\n", sb->s_id);
+		goto fail_sb_buffer;
+	}
+
 	mutex_lock(&fs_info->chunk_mutex);
 	ret = btrfs_read_sys_array(tree_root);
 	mutex_unlock(&fs_info->chunk_mutex);

From 8f24b49688281a77e8331894ed407f0cfe732303 Mon Sep 17 00:00:00 2001
From: Jan Schmidt <list.btrfs@jan-o-sch.net>
Date: Wed, 8 Feb 2012 16:01:01 +0100
Subject: [PATCH 062/202] Btrfs: avoid positive number with ERR_PTR

inode_ref_info() returns 1 when the element wasn't found and < 0 on error,
just like btrfs_search_slot(). In iref_to_path() it's an error when the
inode ref can't be found, thus we return ERR_PTR(ret) in that case. In order
to avoid ERR_PTR(1), we now set ret to -ENOENT in that case.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
---
 fs/btrfs/backref.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 633c701a287d..98f6bf10bbd4 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -892,6 +892,8 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
 		if (eb != eb_in)
 			free_extent_buffer(eb);
 		ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+		if (ret > 0)
+			ret = -ENOENT;
 		if (ret)
 			break;
 		next_inum = found_key.offset;

From 6af021d8fc3bcce790e7fbb391e39c5920fa3f71 Mon Sep 17 00:00:00 2001
From: Jeff Liu <jeff.liu@oracle.com>
Date: Thu, 9 Feb 2012 14:25:50 +0800
Subject: [PATCH 063/202] Btrfs: return the internal error unchanged if
 btrfs_get_extent_fiemap() call failed for SEEK_DATA/SEEK_HOLE inquiry

Given that ENXIO only means "offset beyond EOF" for either SEEK_DATA or SEEK_HOLE inquiry
in a desired file range, so we should return the internal error unchanged if btrfs_get_extent_fiemap()
call failed, rather than ENXIO.

Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
---
 fs/btrfs/file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 0621a3a7d5d1..3a520899b024 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1755,7 +1755,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin)
 						     start - root->sectorsize,
 						     root->sectorsize, 0);
 		if (IS_ERR(em)) {
-			ret = -ENXIO;
+			ret = PTR_ERR(em);
 			goto out;
 		}
 		last_end = em->start + em->len;
@@ -1767,7 +1767,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin)
 	while (1) {
 		em = btrfs_get_extent_fiemap(inode, NULL, 0, start, len, 0);
 		if (IS_ERR(em)) {
-			ret = -ENXIO;
+			ret = PTR_ERR(em);
 			break;
 		}
 

From 2cac13e41bf5b99ffc426bd28dfd2248df1dfa67 Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 9 Feb 2012 18:17:41 +0800
Subject: [PATCH 064/202] Btrfs: fix trim 0 bytes after a device delete

A user reported a bug of btrfs's trim, that is we will trim 0 bytes
after a device delete.

The reproducer:

$ mkfs.btrfs disk1
$ mkfs.btrfs disk2
$ mount disk1 /mnt
$ fstrim -v /mnt
$ btrfs device add disk2 /mnt
$ btrfs device del disk1 /mnt
$ fstrim -v /mnt

This is because after we delete the device, the block group may start from
a non-zero place, which will confuse trim to discard nothing.

Reported-by: Lutz Euler <lutz.euler@freenet.de>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
---
 fs/btrfs/extent-tree.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 283af7a676a3..60bfe2d68547 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -7886,9 +7886,16 @@ int btrfs_trim_fs(struct btrfs_root *root, struct fstrim_range *range)
 	u64 start;
 	u64 end;
 	u64 trimmed = 0;
+	u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
 	int ret = 0;
 
-	cache = btrfs_lookup_block_group(fs_info, range->start);
+	/*
+	 * try to trim all FS space, our block group may start from non-zero.
+	 */
+	if (range->len == total_bytes)
+		cache = btrfs_lookup_first_block_group(fs_info, range->start);
+	else
+		cache = btrfs_lookup_block_group(fs_info, range->start);
 
 	while (cache) {
 		if (cache->key.objectid >= (range->start + range->len)) {

From 859acaf1a29bbacf6256f1159210c8d6df992b33 Mon Sep 17 00:00:00 2001
From: Arne Jansen <sensille@gmx.net>
Date: Thu, 9 Feb 2012 15:09:02 +0100
Subject: [PATCH 065/202] btrfs: don't check DUP chunks twice

Because scrub enumerates the dev extent tree to find the chunks to scrub,
it currently finds each DUP chunk twice and also scrubs it twice. This
patch makes sure that scrub_chunk only checks that part of the chunk the
dev extent has been found for. This only changes the behaviour for DUP
chunks.

Reported-and-tested-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Arne Jansen <sensille@gmx.net>
---
 fs/btrfs/scrub.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 9770cc5bfb76..abc0fbffa510 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -1367,7 +1367,8 @@ out:
 }
 
 static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev,
-	u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length)
+	u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length,
+	u64 dev_offset)
 {
 	struct btrfs_mapping_tree *map_tree =
 		&sdev->dev->dev_root->fs_info->mapping_tree;
@@ -1391,7 +1392,8 @@ static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev,
 		goto out;
 
 	for (i = 0; i < map->num_stripes; ++i) {
-		if (map->stripes[i].dev == sdev->dev) {
+		if (map->stripes[i].dev == sdev->dev &&
+		    map->stripes[i].physical == dev_offset) {
 			ret = scrub_stripe(sdev, map, i, chunk_offset, length);
 			if (ret)
 				goto out;
@@ -1487,7 +1489,7 @@ int scrub_enumerate_chunks(struct scrub_dev *sdev, u64 start, u64 end)
 			break;
 		}
 		ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
-				  chunk_offset, length);
+				  chunk_offset, length, found_key.offset);
 		btrfs_put_block_group(cache);
 		if (ret)
 			break;

From a7e221e9002306a753d6f78b4060edabce402033 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Tue, 14 Feb 2012 17:12:23 +0900
Subject: [PATCH 066/202] Btrfs: fix memory leak in load_free_space_cache()

load_free_space_cache() has forgotten to free path.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
---
 fs/btrfs/free-space-cache.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 5802b1473c3d..b30242f4435e 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -777,6 +777,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info,
 	spin_lock(&block_group->lock);
 	if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
 		spin_unlock(&block_group->lock);
+		btrfs_free_path(path);
 		goto out;
 	}
 	spin_unlock(&block_group->lock);

From 87826df0ec36fc28884b4ddbb3f3af41c4c2008f Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Wed, 15 Feb 2012 16:23:57 +0100
Subject: [PATCH 067/202] btrfs: delalloc for page dirtied out-of-band in fixup
 worker

 We encountered an issue that was easily observable on s/390 systems but
 could really happen anywhere. The timing just seemed to hit reliably
 on s/390 with limited memory.

 The gist is that when an unexpected set_page_dirty() happened, we'd
 run into the BUG() in btrfs_writepage_fixup_worker since it wasn't
 properly set up for delalloc.

 This patch does the following:
 - Performs the missing delalloc in the fixup worker
 - Allow the start hook to return -EBUSY which informs __extent_writepage
   that it should mark the page skipped and not to redirty it. This is
   required since the fixup worker can fail with -ENOSPC and the page
   will have already been redirtied. That causes an Oops in
   drop_outstanding_extents later. Retrying the fixup worker could
   lead to an infinite loop. Deferring the page redirty also saves us
   some cycles since the page would be stuck in a resubmit-redirty loop
   until the fixup worker completes. It's not harmful, just wasteful.
 - If the fixup worker fails, we mark the page and mapping as errored,
   and end the writeback, similar to what we would do had the page
   actually been submitted to writeback.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
---
 fs/btrfs/extent_io.c | 65 +++++++++++++++++++++++++++-----------------
 fs/btrfs/extent_io.h |  1 +
 fs/btrfs/inode.c     | 14 ++++++++--
 3 files changed, 53 insertions(+), 27 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index fcf77e1ded40..89ba79fb945c 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2161,6 +2161,38 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page,
 
 /* lots and lots of room for performance fixes in the end_bio funcs */
 
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
+{
+	int uptodate = (err == 0);
+	struct extent_io_tree *tree;
+	int ret;
+
+	tree = &BTRFS_I(page->mapping->host)->io_tree;
+
+	if (tree->ops && tree->ops->writepage_end_io_hook) {
+		ret = tree->ops->writepage_end_io_hook(page, start,
+					       end, NULL, uptodate);
+		if (ret)
+			uptodate = 0;
+	}
+
+	if (!uptodate && tree->ops &&
+	    tree->ops->writepage_io_failed_hook) {
+		ret = tree->ops->writepage_io_failed_hook(NULL, page,
+						 start, end, NULL);
+		/* Writeback already completed */
+		if (ret == 0)
+			return 1;
+	}
+
+	if (!uptodate) {
+		clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
+		ClearPageUptodate(page);
+		SetPageError(page);
+	}
+	return 0;
+}
+
 /*
  * after a writepage IO is done, we need to:
  * clear the uptodate bits on error
@@ -2172,13 +2204,11 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page,
  */
 static void end_bio_extent_writepage(struct bio *bio, int err)
 {
-	int uptodate = err == 0;
 	struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
 	struct extent_io_tree *tree;
 	u64 start;
 	u64 end;
 	int whole_page;
-	int ret;
 
 	do {
 		struct page *page = bvec->bv_page;
@@ -2195,28 +2225,9 @@ static void end_bio_extent_writepage(struct bio *bio, int err)
 
 		if (--bvec >= bio->bi_io_vec)
 			prefetchw(&bvec->bv_page->flags);
-		if (tree->ops && tree->ops->writepage_end_io_hook) {
-			ret = tree->ops->writepage_end_io_hook(page, start,
-						       end, NULL, uptodate);
-			if (ret)
-				uptodate = 0;
-		}
 
-		if (!uptodate && tree->ops &&
-		    tree->ops->writepage_io_failed_hook) {
-			ret = tree->ops->writepage_io_failed_hook(bio, page,
-							 start, end, NULL);
-			if (ret == 0) {
-				uptodate = (err == 0);
-				continue;
-			}
-		}
-
-		if (!uptodate) {
-			clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
-			ClearPageUptodate(page);
-			SetPageError(page);
-		}
+		if (end_extent_writepage(page, err, start, end))
+			continue;
 
 		if (whole_page)
 			end_page_writeback(page);
@@ -2818,8 +2829,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 	if (tree->ops && tree->ops->writepage_start_hook) {
 		ret = tree->ops->writepage_start_hook(page, start,
 						      page_end);
-		if (ret == -EAGAIN) {
-			redirty_page_for_writepage(wbc, page);
+		if (ret) {
+			/* Fixup worker will requeue */
+			if (ret == -EBUSY)
+				wbc->pages_skipped++;
+			else
+				redirty_page_for_writepage(wbc, page);
 			update_nr_written(page, wbc, nr_written);
 			unlock_page(page);
 			ret = 0;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index bc6a042cb6fc..cecc3518c121 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -319,4 +319,5 @@ struct btrfs_mapping_tree;
 int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
 			u64 length, u64 logical, struct page *page,
 			int mirror_num);
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end);
 #endif
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 7405753ec5d7..bf392e532617 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1555,6 +1555,7 @@ static void btrfs_writepage_fixup_worker(struct btrfs_work *work)
 	struct inode *inode;
 	u64 page_start;
 	u64 page_end;
+	int ret;
 
 	fixup = container_of(work, struct btrfs_writepage_fixup, work);
 	page = fixup->page;
@@ -1582,12 +1583,21 @@ again:
 				     page_end, &cached_state, GFP_NOFS);
 		unlock_page(page);
 		btrfs_start_ordered_extent(inode, ordered, 1);
+		btrfs_put_ordered_extent(ordered);
 		goto again;
 	}
 
-	BUG();
+	ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+	if (ret) {
+		mapping_set_error(page->mapping, ret);
+		end_extent_writepage(page, ret, page_start, page_end);
+		ClearPageChecked(page);
+		goto out;
+	 }
+
 	btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
 	ClearPageChecked(page);
+	set_page_dirty(page);
 out:
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end,
 			     &cached_state, GFP_NOFS);
@@ -1630,7 +1640,7 @@ static int btrfs_writepage_start_hook(struct page *page, u64 start, u64 end)
 	fixup->work.func = btrfs_writepage_fixup_worker;
 	fixup->page = page;
 	btrfs_queue_worker(&root->fs_info->fixup_workers, &fixup->work);
-	return -EAGAIN;
+	return -EBUSY;
 }
 
 static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,

From c08782dacd7a098f2b8bca7f4a57a5b402e9e1e5 Mon Sep 17 00:00:00 2001
From: David Sterba <dsterba@suse.cz>
Date: Thu, 26 Jan 2012 15:01:12 -0500
Subject: [PATCH 068/202] btrfs: fix structs where bitfields and
 spinlock/atomic share 8B word

On ia64, powerpc64 and sparc64 the bitfield is modified through a RMW cycle and current
gcc rewrites the adjacent 4B word, which in case of a spinlock or atomic has
disaterous effect.

https://lkml.org/lkml/2012/2/1/220

Signed-off-by: David Sterba <dsterba@suse.cz>
---
 fs/btrfs/ctree.h      | 2 +-
 fs/btrfs/extent_map.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 3c2cbf7b6663..8e4457e0478e 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -886,7 +886,7 @@ struct btrfs_block_rsv {
 	u64 reserved;
 	struct btrfs_space_info *space_info;
 	spinlock_t lock;
-	unsigned int full:1;
+	unsigned int full;
 };
 
 /*
diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h
index 33a7890b1f40..1195f09761fe 100644
--- a/fs/btrfs/extent_map.h
+++ b/fs/btrfs/extent_map.h
@@ -26,8 +26,8 @@ struct extent_map {
 	unsigned long flags;
 	struct block_device *bdev;
 	atomic_t refs;
-	unsigned int in_tree:1;
-	unsigned int compress_type:4;
+	unsigned int in_tree;
+	unsigned int compress_type;
 };
 
 struct extent_map_tree {

From 8a3344269465b26761b74493cfbeeaa75d821614 Mon Sep 17 00:00:00 2001
From: David Sterba <dsterba@suse.cz>
Date: Fri, 7 Oct 2011 18:06:13 +0200
Subject: [PATCH 069/202] btrfs: silence warning in raid array setup

Raid array setup code creates an extent buffer in an usual way. When the
PAGE_CACHE_SIZE is > super block size, the extent pages are not marked
up-to-date, which triggers a WARN_ON in the following
write_extent_buffer call. Add an explicit up-to-date call to silence the
warning.

Signed-off-by: David Sterba <dsterba@suse.cz>
---
 fs/btrfs/volumes.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 7ffdb154daec..d8f282b5baa9 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4357,6 +4357,20 @@ int btrfs_read_sys_array(struct btrfs_root *root)
 		return -ENOMEM;
 	btrfs_set_buffer_uptodate(sb);
 	btrfs_set_buffer_lockdep_class(root->root_key.objectid, sb, 0);
+	/*
+	 * The sb extent buffer is artifical and just used to read the system array.
+	 * btrfs_set_buffer_uptodate() call does not properly mark all it's
+	 * pages up-to-date when the page is larger: extent does not cover the
+	 * whole page and consequently check_page_uptodate does not find all
+	 * the page's extents up-to-date (the hole beyond sb),
+	 * write_extent_buffer then triggers a WARN_ON.
+	 *
+	 * Regular short extents go through mark_extent_buffer_dirty/writeback cycle,
+	 * but sb spans only this function. Add an explicit SetPageUptodate call
+	 * to silence the warning eg. on PowerPC 64.
+	 */
+	if (PAGE_CACHE_SIZE > BTRFS_SUPER_INFO_SIZE)
+		SetPageUptodate(sb->first_page);
 
 	write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
 	array_size = btrfs_super_sys_array_size(super_copy);

From 4b5a433ae5348c23caa0b5f0a2fca7c342acb200 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 20 Jan 2012 13:55:23 +0100
Subject: [PATCH 070/202] mac80211: call rate control only after init

There are situations where we don't have the
necessary rate control information yet for
station entries, e.g. when associating. This
currently doesn't really happen due to the
dummy station handling; explicitly disabling
rate control when it's not initialised will
allow us to remove dummy stations.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/debugfs_sta.c | 4 ++--
 net/mac80211/rate.c        | 2 +-
 net/mac80211/rate.h        | 1 +
 net/mac80211/sta_info.h    | 2 ++
 4 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 2406b3e7393f..d86217d56bd7 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -63,14 +63,14 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
 	test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
 
 	int res = scnprintf(buf, sizeof(buf),
-			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
 			    TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
 			    TEST(PS_DRIVER), TEST(AUTHORIZED),
 			    TEST(SHORT_PREAMBLE),
 			    TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
 			    TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
 			    TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
-			    TEST(TDLS_PEER_AUTH));
+			    TEST(TDLS_PEER_AUTH), TEST(RATE_CONTROL));
 #undef TEST
 	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
 }
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 5a5a7767d541..ad64f4d5271a 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -336,7 +336,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
 	int i;
 	u32 mask;
 
-	if (sta) {
+	if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) {
 		ista = &sta->sta;
 		priv_sta = sta->rate_ctrl_priv;
 	}
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index 168427b0ffdc..2b83f32144fd 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -62,6 +62,7 @@ static inline void rate_control_rate_init(struct sta_info *sta)
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
 	ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
+	set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
 }
 
 static inline void rate_control_rate_update(struct ieee80211_local *local,
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 6f77f12dc3fc..bfed851d0d36 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -52,6 +52,7 @@
  * @WLAN_STA_SP: Station is in a service period, so don't try to
  *	reply to other uAPSD trigger frames or PS-Poll.
  * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
+ * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
  */
 enum ieee80211_sta_info_flags {
 	WLAN_STA_AUTH,
@@ -71,6 +72,7 @@ enum ieee80211_sta_info_flags {
 	WLAN_STA_UAPSD,
 	WLAN_STA_SP,
 	WLAN_STA_4ADDR_EVENT,
+	WLAN_STA_RATE_CONTROL,
 };
 
 enum ieee80211_sta_state {

From 216c57b214bd621335ff698b475f6db2802502dc Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 8 Feb 2012 19:17:11 +0100
Subject: [PATCH 071/202] mac80211: do not call rate control .tx_status before
 .rate_init

Most rate control implementations assume .get_rate and .tx_status are only
called once the per-station data has been fully initialized.
minstrel_ht crashes if this assumption is violated.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rate.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index 2b83f32144fd..80cfc006dd74 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -41,7 +41,7 @@ static inline void rate_control_tx_status(struct ieee80211_local *local,
 	struct ieee80211_sta *ista = &sta->sta;
 	void *priv_sta = sta->rate_ctrl_priv;
 
-	if (!ref)
+	if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
 		return;
 
 	ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);

From 6670f15b1f6858a43b292d8ab64464e9f085a6aa Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Thu, 9 Feb 2012 18:32:22 -0800
Subject: [PATCH 072/202] mwifiex: clear previous security setting during
 association

Driver maintains different flags for WEP, WPA, WPA2 security modes.
Appropriate flag is set using security information provided in
connect request. mwifiex_is_network_compatible() routine uses them
to check if driver's setting is compatible with AP. Association is
aborted if the routine fails.

For some corner cases, it is observed that association is failed
even for valid security information based on association history.
This patch fixes the problem by clearing previous security setting
during each association.

We should set WEP key provided in connect request as default tx key.
This missing change is also added here.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index c3b6c4652cd6..5b2972b43b0e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -841,7 +841,12 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
 		ret = mwifiex_set_rf_channel(priv, channel,
 						priv->adapter->channel_type);
 
-	ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);	/* Disable keys */
+	/* As this is new association, clear locally stored
+	 * keys and security related flags */
+	priv->sec_info.wpa_enabled = false;
+	priv->sec_info.wpa2_enabled = false;
+	priv->wep_key_curr_index = 0;
+	ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
 
 	if (mode == NL80211_IFTYPE_ADHOC) {
 		/* "privacy" is set only for ad-hoc mode */
@@ -886,6 +891,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
 			dev_dbg(priv->adapter->dev,
 				"info: setting wep encryption"
 				" with key len %d\n", sme->key_len);
+			priv->wep_key_curr_index = sme->key_idx;
 			ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
 							sme->key_idx, 0);
 		}

From 2504a6423b9ab4c36df78227055995644de19edb Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Sat, 11 Feb 2012 10:01:53 -0500
Subject: [PATCH 073/202] ath9k: stop on rates with idx -1 in ath9k rate
 control's .tx_status

Rate control algorithms are supposed to stop processing when they
encounter a rate with the index -1.  Checking for rate->count not being
zero is not enough.

Allowing a rate with negative index leads to memory corruption in
ath_debug_stat_rc().

One consequence of the bug is discussed at
https://bugzilla.redhat.com/show_bug.cgi?id=768639

Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/rc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 635b592ad961..a427a16bb739 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1346,7 +1346,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 	fc = hdr->frame_control;
 	for (i = 0; i < sc->hw->max_rates; i++) {
 		struct ieee80211_tx_rate *rate = &tx_info->status.rates[i];
-		if (!rate->count)
+		if (rate->idx < 0 || !rate->count)
 			break;
 
 		final_ts_idx = i;

From 8e43a905dd574f54c5715d978318290ceafbe275 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Wed, 15 Feb 2012 16:01:42 +0100
Subject: [PATCH 074/202] ARM: 7325/1: fix v7 boot with lockdep enabled

Bootup with lockdep enabled has been broken on v7 since b46c0f74657d
("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR").

This is because v7_setup (which is called very early during boot) calls
v7_flush_dcache_all, and the save_and_disable_irqs added by that patch
ends up attempting to call into lockdep C code (trace_hardirqs_off())
when we are in no position to execute it (no stack, MMU off).

Fix this by using a notrace variant of save_and_disable_irqs.  The code
already uses the notrace variant of restore_irqs.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/assembler.h | 5 +++++
 arch/arm/mm/cache-v7.S           | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095d46de..23371b17b23e 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7a24d39661f0..a655d3da386d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr

From 4272f98a1ae81709fc5c804c33c044064e419cd9 Mon Sep 17 00:00:00 2001
From: Javi Merino <javi.merino@arm.com>
Date: Wed, 16 Nov 2011 12:36:39 +0100
Subject: [PATCH 075/202] ARM: 7164/3: PL330: Fix the size of the
 dst_cache_ctrl field

dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit
field in the Channel Control Register (see Table 3-21 of the DMA-330
Technical Reference Manual) and should be programmed as such.

Reference: <1320244259-10496-3-git-send-email-javi.merino@arm.com>

Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardware/pl330.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca0..c1821385abfa 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */

From 46e33c606af8e0caeeca374103189663d877c0d6 Mon Sep 17 00:00:00 2001
From: Javi Merino <javi.merino@arm.com>
Date: Wed, 15 Feb 2012 17:36:39 +0100
Subject: [PATCH 076/202] ARM: 7326/2: PL330: fix null pointer dereference in
 pl330_chan_ctrl()

This fixes the thrd->req_running field being accessed before thrd
is checked for null. The error was introduced in

   abb959f: ARM: 7237/1: PL330: Fix driver freeze

Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org>

Cc: stable@kernel.org
Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org>
Acked-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/pl330.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047c..ff3ad2244824 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 

From fee6a3c33a8f137f39cd9997b0476411f73576c7 Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Wed, 15 Feb 2012 21:17:12 +0100
Subject: [PATCH 077/202] ARM: 7327/1: need to include asm/system.h in
 asm/processor.h

For files that include asm/processor.h but not asm/system.h:

arch/arm/mach-msm/include/mach/uncompress.h: In function 'putc':
arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration]

In this case, smp_mb() is from the cpu_relax() call in the msm putc().

It likely went uncaught when the uncompress.h change went in since the
defconfig didn't enable that code path, but later changes (e76f4750f4:
ARM: debug: arrange Kconfig options more logically) resulted in the
option being on for msm_defconfig and thus exposed it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/processor.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613c..cb8d638924fd 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \

From 1c8ecf80fdee4e7b23a9e7da7ff9bd59ba2dcf96 Mon Sep 17 00:00:00 2001
From: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Tue, 14 Feb 2012 11:44:48 -0200
Subject: [PATCH 078/202] drm/i915: do not enable RC6p on Sandy Bridge

With base on latest findings, RC6p seems to be respondible for RC6-related
issues on Sandy Bridge platform. To work-around those issues, the previous
solution was to completely disable RC6 on Sandy Bridge for the past few
releases, even if plain RC6 was not giving any issues.

What this patch does is preventing RC6p from being enabled on Sandy Bridge
even if users enable RC6 via a kernel parameter. So it won't change the
defaults in any way, but will ensure that if users do enable RC6 manually
it won't break their machines by enabling this extra state.

Proper fix for this (enabling specific RC6 states according to the GPU
generation) were proposed for the -next kernel, but we are too late in the
release process now to pick such changes.

Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d9b042b1d14d..049804eee290 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8182,8 +8182,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
 
 	if (intel_enable_rc6(dev_priv->dev))
-		rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
-			GEN6_RC_CTL_RC6_ENABLE;
+		rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
+			(IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0;
 
 	I915_WRITE(GEN6_RC_CONTROL,
 		   rc6_mask |

From 1109bf8bcbf455e4cfebce862f9f9fa5a2f386e9 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Tue, 14 Feb 2012 16:52:41 +0900
Subject: [PATCH 079/202] drm/exynos: Fix typo in exynos_mixer.c

Correct spelling "sucessful" to "successful" in
drivers/gpu/drm/exynos/exynos_mixer.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_mixer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index ac24cff39775..33afd0cf036a 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -1044,7 +1044,7 @@ static int mixer_remove(struct platform_device *pdev)
 					platform_get_drvdata(pdev);
 	struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
 
-	dev_info(dev, "remove sucessful\n");
+	dev_info(dev, "remove successful\n");
 
 	mixer_resource_poweroff(ctx);
 	mixer_resources_cleanup(ctx);

From 44a0e022b86a8c12ed06c02f52045c8f9f118bb1 Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Wed, 15 Feb 2012 11:25:17 +0900
Subject: [PATCH 080/202] drm/exynos: changed priority of mixer layers.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_mixer.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 33afd0cf036a..47961679c447 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -779,15 +779,15 @@ static void mixer_win_reset(struct mixer_context *ctx)
 	mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
 		MXR_STATUS_BURST_MASK);
 
-	/* setting default layer priority: layer1 > video > layer0
+	/* setting default layer priority: layer1 > layer0 > video
 	 * because typical usage scenario would be
+	 * layer1 - OSD
 	 * layer0 - framebuffer
 	 * video - video overlay
-	 * layer1 - OSD
 	 */
-	val  = MXR_LAYER_CFG_GRP0_VAL(1);
-	val |= MXR_LAYER_CFG_VP_VAL(2);
-	val |= MXR_LAYER_CFG_GRP1_VAL(3);
+	val = MXR_LAYER_CFG_GRP1_VAL(3);
+	val |= MXR_LAYER_CFG_GRP0_VAL(2);
+	val |= MXR_LAYER_CFG_VP_VAL(1);
 	mixer_reg_write(res, MXR_LAYER_CFG, val);
 
 	/* setting background color */

From 6f811502a473a32a9b892fb35d77b8f91dc7484c Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Wed, 15 Feb 2012 11:25:18 +0900
Subject: [PATCH 081/202] drm/exynos: removed pageflip_event_list init code
 when closed.

if one process is terminated by ctrl-c while two processes are
using pageflip feature then for last pageflip event,
user can't get poll from kernel side so this patch fixes the problem.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyoungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_drm_drv.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 35889ca255e9..2ef12aa30303 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -141,16 +141,10 @@ static int exynos_drm_unload(struct drm_device *dev)
 }
 
 static void exynos_drm_preclose(struct drm_device *dev,
-					struct drm_file *file_priv)
+					struct drm_file *file)
 {
-	struct exynos_drm_private *dev_priv = dev->dev_private;
+	DRM_DEBUG_DRIVER("%s\n", __FILE__);
 
-	/*
-	 * drm framework frees all events at release time,
-	 * so private event list should be cleared.
-	 */
-	if (!list_empty(&dev_priv->pageflip_event_list))
-		INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
 }
 
 static void exynos_drm_lastclose(struct drm_device *dev)

From d081f5660422270856b77bcbbaa312138f556c9e Mon Sep 17 00:00:00 2001
From: Inki Dae <inki.dae@samsung.com>
Date: Wed, 15 Feb 2012 11:25:19 +0900
Subject: [PATCH 082/202] drm/exynos: added possible_clones setup function.

basically, all crtcs are possible to clone each other.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_drm_core.c    |  3 ++
 drivers/gpu/drm/exynos/exynos_drm_drv.c     |  4 +++
 drivers/gpu/drm/exynos/exynos_drm_encoder.c | 34 +++++++++++++++++++++
 drivers/gpu/drm/exynos/exynos_drm_encoder.h |  1 +
 4 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c
index 661a03571d0c..d08a55896d50 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_core.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_core.c
@@ -193,6 +193,9 @@ int exynos_drm_subdrv_register(struct exynos_drm_subdrv *subdrv)
 			return err;
 		}
 
+		/* setup possible_clones. */
+		exynos_drm_encoder_setup(drm_dev);
+
 		/*
 		 * if any specific driver such as fimd or hdmi driver called
 		 * exynos_drm_subdrv_register() later than drm_load(),
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 2ef12aa30303..76a111f54ccb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -33,6 +33,7 @@
 
 #include "exynos_drm_drv.h"
 #include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
 #include "exynos_drm_fbdev.h"
 #include "exynos_drm_fb.h"
 #include "exynos_drm_gem.h"
@@ -99,6 +100,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto err_vblank;
 
+	/* setup possible_clones. */
+	exynos_drm_encoder_setup(dev);
+
 	/*
 	 * create and configure fb helper and also exynos specific
 	 * fbdev object.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index 86b93dde219a..ef4754f1519b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -195,6 +195,40 @@ static struct drm_encoder_funcs exynos_encoder_funcs = {
 	.destroy = exynos_drm_encoder_destroy,
 };
 
+static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder)
+{
+	struct drm_encoder *clone;
+	struct drm_device *dev = encoder->dev;
+	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+	struct exynos_drm_display_ops *display_ops =
+				exynos_encoder->manager->display_ops;
+	unsigned int clone_mask = 0;
+	int cnt = 0;
+
+	list_for_each_entry(clone, &dev->mode_config.encoder_list, head) {
+		switch (display_ops->type) {
+		case EXYNOS_DISPLAY_TYPE_LCD:
+		case EXYNOS_DISPLAY_TYPE_HDMI:
+			clone_mask |= (1 << (cnt++));
+			break;
+		default:
+			continue;
+		}
+	}
+
+	return clone_mask;
+}
+
+void exynos_drm_encoder_setup(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+
+	DRM_DEBUG_KMS("%s\n", __FILE__);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		encoder->possible_clones = exynos_drm_encoder_clones(encoder);
+}
+
 struct drm_encoder *
 exynos_drm_encoder_create(struct drm_device *dev,
 			   struct exynos_drm_manager *manager,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
index 97b087a51cb6..eb7d2316847e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
@@ -30,6 +30,7 @@
 
 struct exynos_drm_manager;
 
+void exynos_drm_encoder_setup(struct drm_device *dev);
 struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
 					       struct exynos_drm_manager *mgr,
 					       unsigned int possible_crtcs);

From c5614ae326c7fdd244d8e0365b8b78d5e3cd5bf4 Mon Sep 17 00:00:00 2001
From: Inki Dae <inki.dae@samsung.com>
Date: Wed, 15 Feb 2012 11:25:20 +0900
Subject: [PATCH 083/202] drm/exynos: fixed page flip issue.

with vblank_refcount = 1, there was the case that drm_vblank_put
is called by specific page flip function so this patch fixes the
issue.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_drm_crtc.c | 6 +++---
 drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 ++++++-
 drivers/gpu/drm/exynos/exynos_mixer.c    | 7 ++++++-
 3 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index e3861ac49295..de818831a511 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -307,9 +307,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
 		 */
 		event->pipe = exynos_crtc->pipe;
 
-		list_add_tail(&event->base.link,
-				&dev_priv->pageflip_event_list);
-
 		ret = drm_vblank_get(dev, exynos_crtc->pipe);
 		if (ret) {
 			DRM_DEBUG("failed to acquire vblank counter\n");
@@ -318,6 +315,9 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
 			goto out;
 		}
 
+		list_add_tail(&event->base.link,
+				&dev_priv->pageflip_event_list);
+
 		crtc->fb = fb;
 		ret = exynos_drm_crtc_update(crtc);
 		if (ret) {
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index b6a737d196ae..0dbb32bb18a3 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -604,7 +604,12 @@ static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc)
 	}
 
 	if (is_checked) {
-		drm_vblank_put(drm_dev, crtc);
+		/*
+		 * call drm_vblank_put only in case that drm_vblank_get was
+		 * called.
+		 */
+		if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+			drm_vblank_put(drm_dev, crtc);
 
 		/*
 		 * don't off vblank if vblank_disable_allowed is 1,
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 47961679c447..93846e810e38 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -712,7 +712,12 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc)
 	}
 
 	if (is_checked)
-		drm_vblank_put(drm_dev, crtc);
+		/*
+		 * call drm_vblank_put only in case that drm_vblank_get was
+		 * called.
+		 */
+		if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+			drm_vblank_put(drm_dev, crtc);
 
 	spin_unlock_irqrestore(&drm_dev->event_lock, flags);
 }

From bc41eae2c84694667c1d7747fa28db8e75948ac4 Mon Sep 17 00:00:00 2001
From: Inki Dae <inki.dae@samsung.com>
Date: Wed, 15 Feb 2012 11:25:21 +0900
Subject: [PATCH 084/202] drm/exynos: removed exynos_drm_fbdev_recreate
 function.

this function ins't needed anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 70 ++---------------------
 1 file changed, 4 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index d7ae29d2f3d6..3508700e529b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -195,66 +195,6 @@ out:
 	return ret;
 }
 
-static bool
-exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
-			    struct drm_fb_helper_surface_size *sizes)
-{
-	if (fb->width != sizes->surface_width)
-		return false;
-	if (fb->height != sizes->surface_height)
-		return false;
-	if (fb->bits_per_pixel != sizes->surface_bpp)
-		return false;
-	if (fb->depth != sizes->surface_depth)
-		return false;
-
-	return true;
-}
-
-static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
-				      struct drm_fb_helper_surface_size *sizes)
-{
-	struct drm_device *dev = helper->dev;
-	struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
-	struct exynos_drm_gem_obj *exynos_gem_obj;
-	struct drm_framebuffer *fb = helper->fb;
-	struct drm_mode_fb_cmd2 mode_cmd = { 0 };
-	unsigned long size;
-
-	DRM_DEBUG_KMS("%s\n", __FILE__);
-
-	if (exynos_drm_fbdev_is_samefb(fb, sizes))
-		return 0;
-
-	mode_cmd.width = sizes->surface_width;
-	mode_cmd.height = sizes->surface_height;
-	mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3);
-	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
-							  sizes->surface_depth);
-
-	if (exynos_fbdev->exynos_gem_obj)
-		exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj);
-
-	if (fb->funcs->destroy)
-		fb->funcs->destroy(fb);
-
-	size = mode_cmd.pitches[0] * mode_cmd.height;
-	exynos_gem_obj = exynos_drm_gem_create(dev, size);
-	if (IS_ERR(exynos_gem_obj))
-		return PTR_ERR(exynos_gem_obj);
-
-	exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-
-	helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd,
-			&exynos_gem_obj->base);
-	if (IS_ERR_OR_NULL(helper->fb)) {
-		DRM_ERROR("failed to create drm framebuffer.\n");
-		return PTR_ERR(helper->fb);
-	}
-
-	return exynos_drm_fbdev_update(helper, helper->fb);
-}
-
 static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 				   struct drm_fb_helper_surface_size *sizes)
 {
@@ -262,6 +202,10 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
+	/*
+	 * with !helper->fb, it means that this funcion is called first time
+	 * and after that, the helper->fb would be used as clone mode.
+	 */
 	if (!helper->fb) {
 		ret = exynos_drm_fbdev_create(helper, sizes);
 		if (ret < 0) {
@@ -274,12 +218,6 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 		 * because register_framebuffer() should be called.
 		 */
 		ret = 1;
-	} else {
-		ret = exynos_drm_fbdev_recreate(helper, sizes);
-		if (ret < 0) {
-			DRM_ERROR("failed to reconfigure fbdev\n");
-			return ret;
-		}
 	}
 
 	return ret;

From 53ef299f3900bc1deb163b94d4f1cac4f3346152 Mon Sep 17 00:00:00 2001
From: Inki Dae <inki.dae@samsung.com>
Date: Wed, 15 Feb 2012 11:25:22 +0900
Subject: [PATCH 085/202] drm/exynos: added postclose to release resource.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/exynos/exynos_drm_drv.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 76a111f54ccb..58820ebd3558 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -151,6 +151,17 @@ static void exynos_drm_preclose(struct drm_device *dev,
 
 }
 
+static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+	if (!file->driver_priv)
+		return;
+
+	kfree(file->driver_priv);
+	file->driver_priv = NULL;
+}
+
 static void exynos_drm_lastclose(struct drm_device *dev)
 {
 	DRM_DEBUG_DRIVER("%s\n", __FILE__);
@@ -193,6 +204,7 @@ static struct drm_driver exynos_drm_driver = {
 	.unload			= exynos_drm_unload,
 	.preclose		= exynos_drm_preclose,
 	.lastclose		= exynos_drm_lastclose,
+	.postclose		= exynos_drm_postclose,
 	.get_vblank_counter	= drm_vblank_count,
 	.enable_vblank		= exynos_drm_crtc_enable_vblank,
 	.disable_vblank		= exynos_drm_crtc_disable_vblank,

From 12fc9d0923ca70ae8960bccebac09d5c12f8c4d4 Mon Sep 17 00:00:00 2001
From: Florian Albrechtskirchinger <falbrechtskirchinger@gmail.com>
Date: Fri, 10 Feb 2012 22:15:54 +0100
Subject: [PATCH 086/202] btrfs: honor umask when creating subvol root

Set the subvol root inode permissions based on the current umask.
---
 fs/btrfs/inode.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index bf392e532617..6e0ee9b0d742 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6706,8 +6706,10 @@ int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
 	int err;
 	u64 index = 0;
 
-	inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
-				new_dirid, S_IFDIR | 0700, &index);
+	inode = btrfs_new_inode(trans, new_root, NULL, "..", 2,
+				new_dirid, new_dirid,
+				S_IFDIR | (~current_umask() & S_IRWXUGO),
+				&index);
 	if (IS_ERR(inode))
 		return PTR_ERR(inode);
 	inode->i_op = &btrfs_dir_inode_operations;

From c14c95f62ecb8710af14ae0d48e01991b70bb6f4 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 16 Feb 2012 16:38:07 +0100
Subject: [PATCH 087/202] ALSA: hda/realtek - Fix overflow of vol/sw check
 bitmap

The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix
missing volume controls with ALC260] is too narrow for some codecs,
which may have more NIDs than 0x20, thus it may overflow the bitmap
array on them.

Just double the number to cover all and also add a sanity-check code
to be safer.

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1358987c49d8..389a28a21fa9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -80,6 +80,8 @@ enum {
 	ALC_AUTOMUTE_MIXER,	/* mute/unmute mixer widget AMP */
 };
 
+#define MAX_VOL_NIDS	0x40
+
 struct alc_spec {
 	/* codec parameterization */
 	const struct snd_kcontrol_new *mixers[5];	/* mixer arrays */
@@ -118,8 +120,8 @@ struct alc_spec {
 	const hda_nid_t *capsrc_nids;
 	hda_nid_t dig_in_nid;		/* digital-in NID; optional */
 	hda_nid_t mixer_nid;		/* analog-mixer NID */
-	DECLARE_BITMAP(vol_ctls, 0x20 << 1);
-	DECLARE_BITMAP(sw_ctls, 0x20 << 1);
+	DECLARE_BITMAP(vol_ctls, MAX_VOL_NIDS << 1);
+	DECLARE_BITMAP(sw_ctls, MAX_VOL_NIDS << 1);
 
 	/* capture setup for dynamic dual-adc switch */
 	hda_nid_t cur_adc;
@@ -3149,7 +3151,10 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec)
 static inline unsigned int get_ctl_pos(unsigned int data)
 {
 	hda_nid_t nid = get_amp_nid_(data);
-	unsigned int dir = get_amp_direction_(data);
+	unsigned int dir;
+	if (snd_BUG_ON(nid >= MAX_VOL_NIDS))
+		return 0;
+	dir = get_amp_direction_(data);
 	return (nid << 1) | dir;
 }
 

From 013bd4c336ad0d30e9e41f9cff0dbc1858934e75 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Thu, 16 Feb 2012 10:11:40 +0900
Subject: [PATCH 088/202] Btrfs: fix return value check of extent_io_ops

This patch adds the check on the return value of extent_io_ops.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
---
 fs/btrfs/extent_io.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 89ba79fb945c..b05d35a7c0f1 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2154,9 +2154,10 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page,
 		 "this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
 		 failrec->this_mirror, num_copies, failrec->in_validation);
 
-	tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
-					failrec->bio_flags, 0);
-	return 0;
+	ret = tree->ops->submit_bio_hook(inode, read_mode, bio,
+					 failrec->this_mirror,
+					 failrec->bio_flags, 0);
+	return ret;
 }
 
 /* lots and lots of room for performance fixes in the end_bio funcs */
@@ -2790,9 +2791,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 				delalloc_start = delalloc_end + 1;
 				continue;
 			}
-			tree->ops->fill_delalloc(inode, page, delalloc_start,
-						 delalloc_end, &page_started,
-						 &nr_written);
+			ret = tree->ops->fill_delalloc(inode, page,
+						       delalloc_start,
+						       delalloc_end,
+						       &page_started,
+						       &nr_written);
+			BUG_ON(ret);
 			/*
 			 * delalloc_end is already one less than the total
 			 * length, so we don't subtract one from

From 600a45e1d5e376f679ff9ecc4ce9452710a6d27c Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Thu, 16 Feb 2012 15:01:24 +0800
Subject: [PATCH 089/202] Btrfs: fix deadlock on page lock when doing
 auto-defragment

When I ran xfstests circularly on a auto-defragment btrfs, the deadlock
happened.

Steps to reproduce:
[tty0]
 # export MOUNT_OPTIONS="-o autodefrag"
 # export TEST_DEV=<partition1>
 # export TEST_DIR=<mountpoint1>
 # export SCRATCH_DEV=<partition2>
 # export SCRATCH_MNT=<mountpoint2>
 # while [ 1 ]
 > do
 > ./check 091 127 263
 > sleep 1
 > done
[tty1]
 # while [ 1 ]
 > do
 > echo 3 > /proc/sys/vm/drop_caches
 > done

Several hours later, the test processes will hang on, and the deadlock will
happen on page lock.

The reason is that:
  Auto defrag task		Flush thread			Test task
				btrfs_writepages()
				  add ordered extent
				  (including page 1, 2)
				  set page 1 writeback
				  set page 2 writeback
				endio_fn()
				  end page 2 writeback
								release page 2
lock page 1
alloc and lock page 2
page 2 is not uptodate
  btrfs_readpage()
    start ordered extent()
    btrfs_writepages()
      try  to lock page 1

so deadlock happens.

Fix this bug by unlocking the page which is in writeback, and re-locking it
after the writeback end.

Signed-off-by: Miao Xie <miax@cn.fujitsu.com>
---
 fs/btrfs/ioctl.c | 53 ++++++++++++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 0b06a5ca8afc..e9bdb8b783e5 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -862,6 +862,7 @@ static int cluster_pages_for_defrag(struct inode *inode,
 	int i_done;
 	struct btrfs_ordered_extent *ordered;
 	struct extent_state *cached_state = NULL;
+	struct extent_io_tree *tree;
 	gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
 
 	if (isize == 0)
@@ -872,18 +873,34 @@ static int cluster_pages_for_defrag(struct inode *inode,
 					   num_pages << PAGE_CACHE_SHIFT);
 	if (ret)
 		return ret;
-again:
-	ret = 0;
 	i_done = 0;
+	tree = &BTRFS_I(inode)->io_tree;
 
 	/* step one, lock all the pages */
 	for (i = 0; i < num_pages; i++) {
 		struct page *page;
+again:
 		page = find_or_create_page(inode->i_mapping,
-					    start_index + i, mask);
+					   start_index + i, mask);
 		if (!page)
 			break;
 
+		page_start = page_offset(page);
+		page_end = page_start + PAGE_CACHE_SIZE - 1;
+		while (1) {
+			lock_extent(tree, page_start, page_end, GFP_NOFS);
+			ordered = btrfs_lookup_ordered_extent(inode,
+							      page_start);
+			unlock_extent(tree, page_start, page_end, GFP_NOFS);
+			if (!ordered)
+				break;
+
+			unlock_page(page);
+			btrfs_start_ordered_extent(inode, ordered, 1);
+			btrfs_put_ordered_extent(ordered);
+			lock_page(page);
+		}
+
 		if (!PageUptodate(page)) {
 			btrfs_readpage(NULL, page);
 			lock_page(page);
@@ -894,15 +911,22 @@ again:
 				break;
 			}
 		}
+
 		isize = i_size_read(inode);
 		file_end = (isize - 1) >> PAGE_CACHE_SHIFT;
-		if (!isize || page->index > file_end ||
-		    page->mapping != inode->i_mapping) {
+		if (!isize || page->index > file_end) {
 			/* whoops, we blew past eof, skip this page */
 			unlock_page(page);
 			page_cache_release(page);
 			break;
 		}
+
+		if (page->mapping != inode->i_mapping) {
+			unlock_page(page);
+			page_cache_release(page);
+			goto again;
+		}
+
 		pages[i] = page;
 		i_done++;
 	}
@@ -925,25 +949,6 @@ again:
 	lock_extent_bits(&BTRFS_I(inode)->io_tree,
 			 page_start, page_end - 1, 0, &cached_state,
 			 GFP_NOFS);
-	ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1);
-	if (ordered &&
-	    ordered->file_offset + ordered->len > page_start &&
-	    ordered->file_offset < page_end) {
-		btrfs_put_ordered_extent(ordered);
-		unlock_extent_cached(&BTRFS_I(inode)->io_tree,
-				     page_start, page_end - 1,
-				     &cached_state, GFP_NOFS);
-		for (i = 0; i < i_done; i++) {
-			unlock_page(pages[i]);
-			page_cache_release(pages[i]);
-		}
-		btrfs_wait_ordered_range(inode, page_start,
-					 page_end - page_start);
-		goto again;
-	}
-	if (ordered)
-		btrfs_put_ordered_extent(ordered);
-
 	clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start,
 			  page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
 			  EXTENT_DO_ACCOUNTING, 0, 0, &cached_state,

From 285190d99fef696ec8b0041787387f013cb71d67 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Thu, 16 Feb 2012 16:23:58 +0900
Subject: [PATCH 090/202] Btrfs: check return value of lookup_extent_mapping()
 correctly

This patch corrects error checking of lookup_extent_mapping().

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
---
 fs/btrfs/compression.c | 2 ++
 fs/btrfs/extent_io.c   | 2 +-
 fs/btrfs/volumes.c     | 2 +-
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 14f1c5a0b2d2..d02c27cd14c7 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -588,6 +588,8 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
 				   page_offset(bio->bi_io_vec->bv_page),
 				   PAGE_CACHE_SIZE);
 	read_unlock(&em_tree->lock);
+	if (!em)
+		return -EIO;
 
 	compressed_len = em->block_len;
 	cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index b05d35a7c0f1..8d6f55fbd28e 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3308,7 +3308,7 @@ int try_release_extent_mapping(struct extent_map_tree *map,
 			len = end - start + 1;
 			write_lock(&map->lock);
 			em = lookup_extent_mapping(map, start, len);
-			if (IS_ERR_OR_NULL(em)) {
+			if (!em) {
 				write_unlock(&map->lock);
 				break;
 			}
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index d8f282b5baa9..cd040bf3fd87 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1954,7 +1954,7 @@ static int btrfs_relocate_chunk(struct btrfs_root *root,
 	em = lookup_extent_mapping(em_tree, chunk_offset, 1);
 	read_unlock(&em_tree->lock);
 
-	BUG_ON(em->start > chunk_offset ||
+	BUG_ON(!em || em->start > chunk_offset ||
 	       em->start + em->len < chunk_offset);
 	map = (struct map_lookup *)em->bdev;
 

From 0449314a9cc5a7fb0bd42e2175a3c46f68f3a2b0 Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 16 Feb 2012 18:34:37 +0800
Subject: [PATCH 091/202] Btrfs: skip states when they does not contain bits to
 clear

Clearing a range's bits is different with setting them, since we don't
need to touch them when states do not contain bits we want.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
---
 fs/btrfs/extent_io.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 8d6f55fbd28e..fe14285b53f1 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -513,6 +513,15 @@ hit_next:
 	WARN_ON(state->end < start);
 	last_end = state->end;
 
+	if (state->end < end && !need_resched())
+		next_node = rb_next(&state->rb_node);
+	else
+		next_node = NULL;
+
+	/* the state doesn't have the wanted bits, go ahead */
+	if (!(state->state & bits))
+		goto next;
+
 	/*
 	 *     | ---- desired range ---- |
 	 *  | state | or
@@ -565,12 +574,8 @@ hit_next:
 		goto out;
 	}
 
-	if (state->end < end && prealloc && !need_resched())
-		next_node = rb_next(&state->rb_node);
-	else
-		next_node = NULL;
-
 	set |= clear_state_bit(tree, state, &bits, wake);
+next:
 	if (last_end == (u64)-1)
 		goto out;
 	start = last_end + 1;

From 9d47c7671dc555e198c7347a173ed37316e0c4c1 Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 16 Feb 2012 18:34:38 +0800
Subject: [PATCH 092/202] Btrfs: kick out redundant stuff in convert_extent_bit

clear_state_bit will do merge_state for us, so kick out the redundant one.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
---
 fs/btrfs/extent_io.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index fe14285b53f1..37259ff5cd71 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -966,8 +966,6 @@ hit_next:
 
 		set_state_bits(tree, state, &bits);
 		clear_state_bit(tree, state, &clear_bits, 0);
-
-		merge_state(tree, state);
 		if (last_end == (u64)-1)
 			goto out;
 
@@ -1012,7 +1010,6 @@ hit_next:
 		if (state->end <= end) {
 			set_state_bits(tree, state, &bits);
 			clear_state_bit(tree, state, &clear_bits, 0);
-			merge_state(tree, state);
 			if (last_end == (u64)-1)
 				goto out;
 			start = last_end + 1;
@@ -1073,8 +1070,6 @@ hit_next:
 
 		set_state_bits(tree, prealloc, &bits);
 		clear_state_bit(tree, prealloc, &clear_bits, 0);
-
-		merge_state(tree, prealloc);
 		prealloc = NULL;
 		goto out;
 	}

From d9b0218f6cb682aa6a4ada2bfc5a25fdf3018563 Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 16 Feb 2012 18:34:39 +0800
Subject: [PATCH 093/202] Btrfs: fix a bug on overcommit stuff

When overcommitting, we should check the sum of pinned space and
bytes for delayed item.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
---
 fs/btrfs/extent-tree.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 60bfe2d68547..dc083f55bcfd 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3611,12 +3611,15 @@ static int may_commit_transaction(struct btrfs_root *root,
 	if (space_info != delayed_rsv->space_info)
 		return -ENOSPC;
 
+	spin_lock(&space_info->lock);
 	spin_lock(&delayed_rsv->lock);
-	if (delayed_rsv->size < bytes) {
+	if (space_info->bytes_pinned + delayed_rsv->size < bytes) {
 		spin_unlock(&delayed_rsv->lock);
+		spin_unlock(&space_info->lock);
 		return -ENOSPC;
 	}
 	spin_unlock(&delayed_rsv->lock);
+	spin_unlock(&space_info->lock);
 
 commit:
 	trans = btrfs_join_transaction(root);

From ef8d60fb79614a86a82720dc2402631dbcafb315 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 17 Feb 2012 10:12:38 +0100
Subject: [PATCH 094/202] ALSA: hda/realtek - Fix surround output regression on
 Acer Aspire 5935

The previous fix for the speaker on Acer Aspire 59135 introduced
another problem for surround outputs.  It changed the connections on
the line-in/mic pins for limiting the routes, but it left the modified
connections.  Thus wrong connection indices were written when set to
4ch or 6ch mode.

This patch fixes it by restoring the right connections just after
parsing the tree but before the initialization.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 389a28a21fa9..3647baa9bfed 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4441,12 +4441,20 @@ static void alc889_fixup_dac_route(struct hda_codec *codec,
 				   const struct alc_fixup *fix, int action)
 {
 	if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+		/* fake the connections during parsing the tree */
 		hda_nid_t conn1[2] = { 0x0c, 0x0d };
 		hda_nid_t conn2[2] = { 0x0e, 0x0f };
 		snd_hda_override_conn_list(codec, 0x14, 2, conn1);
 		snd_hda_override_conn_list(codec, 0x15, 2, conn1);
 		snd_hda_override_conn_list(codec, 0x18, 2, conn2);
 		snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+	} else if (action == ALC_FIXUP_ACT_PROBE) {
+		/* restore the connections */
+		hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
+		snd_hda_override_conn_list(codec, 0x14, 5, conn);
+		snd_hda_override_conn_list(codec, 0x15, 5, conn);
+		snd_hda_override_conn_list(codec, 0x18, 5, conn);
+		snd_hda_override_conn_list(codec, 0x1a, 5, conn);
 	}
 }
 

From f86f36a6ae625eda87a13e1ea102a908e08f491b Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue, 14 Feb 2012 20:33:19 -0500
Subject: [PATCH 095/202] NFSv4.1: Fix a NFSv4.1 session initialisation
 regression

Commit aacd553 (NFSv4.1: cleanup init and reset of session slot tables)
introduces a regression in the session initialisation code. New tables
now find their sequence ids initialised to 0, rather than the mandated
value of 1 (see RFC5661).

Fix the problem by merging nfs4_reset_slot_table() and nfs4_init_slot_table().
Since the tbl->max_slots is initialised to 0, the test in
nfs4_reset_slot_table for max_reqs != tbl->max_slots will automatically
pass for an empty table.

Reported-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/nfs4proc.c | 107 ++++++++++++++++++----------------------------
 1 file changed, 42 insertions(+), 65 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d202e04aca94..b4d67feab90b 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5008,37 +5008,53 @@ int nfs4_proc_get_lease_time(struct nfs_client *clp, struct nfs_fsinfo *fsinfo)
 	return status;
 }
 
+static struct nfs4_slot *nfs4_alloc_slots(u32 max_slots, gfp_t gfp_flags)
+{
+	return kcalloc(max_slots, sizeof(struct nfs4_slot), gfp_flags);
+}
+
+static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl,
+		struct nfs4_slot *new,
+		u32 max_slots,
+		u32 ivalue)
+{
+	struct nfs4_slot *old = NULL;
+	u32 i;
+
+	spin_lock(&tbl->slot_tbl_lock);
+	if (new) {
+		old = tbl->slots;
+		tbl->slots = new;
+		tbl->max_slots = max_slots;
+	}
+	tbl->highest_used_slotid = -1;	/* no slot is currently used */
+	for (i = 0; i < tbl->max_slots; i++)
+		tbl->slots[i].seq_nr = ivalue;
+	spin_unlock(&tbl->slot_tbl_lock);
+	kfree(old);
+}
+
 /*
- * Reset a slot table
+ * (re)Initialise a slot table
  */
-static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
-				 int ivalue)
+static int nfs4_realloc_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
+				 u32 ivalue)
 {
 	struct nfs4_slot *new = NULL;
-	int i;
-	int ret = 0;
+	int ret = -ENOMEM;
 
 	dprintk("--> %s: max_reqs=%u, tbl->max_slots %d\n", __func__,
 		max_reqs, tbl->max_slots);
 
 	/* Does the newly negotiated max_reqs match the existing slot table? */
 	if (max_reqs != tbl->max_slots) {
-		ret = -ENOMEM;
-		new = kmalloc(max_reqs * sizeof(struct nfs4_slot),
-			      GFP_NOFS);
+		new = nfs4_alloc_slots(max_reqs, GFP_NOFS);
 		if (!new)
 			goto out;
-		ret = 0;
-		kfree(tbl->slots);
 	}
-	spin_lock(&tbl->slot_tbl_lock);
-	if (new) {
-		tbl->slots = new;
-		tbl->max_slots = max_reqs;
-	}
-	for (i = 0; i < tbl->max_slots; ++i)
-		tbl->slots[i].seq_nr = ivalue;
-	spin_unlock(&tbl->slot_tbl_lock);
+	ret = 0;
+
+	nfs4_add_and_init_slots(tbl, new, max_reqs, ivalue);
 	dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
 		tbl, tbl->slots, tbl->max_slots);
 out:
@@ -5060,36 +5076,6 @@ static void nfs4_destroy_slot_tables(struct nfs4_session *session)
 	return;
 }
 
-/*
- * Initialize slot table
- */
-static int nfs4_init_slot_table(struct nfs4_slot_table *tbl,
-		int max_slots, int ivalue)
-{
-	struct nfs4_slot *slot;
-	int ret = -ENOMEM;
-
-	BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE);
-
-	dprintk("--> %s: max_reqs=%u\n", __func__, max_slots);
-
-	slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_NOFS);
-	if (!slot)
-		goto out;
-	ret = 0;
-
-	spin_lock(&tbl->slot_tbl_lock);
-	tbl->max_slots = max_slots;
-	tbl->slots = slot;
-	tbl->highest_used_slotid = -1;  /* no slot is currently used */
-	spin_unlock(&tbl->slot_tbl_lock);
-	dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
-		tbl, tbl->slots, tbl->max_slots);
-out:
-	dprintk("<-- %s: return %d\n", __func__, ret);
-	return ret;
-}
-
 /*
  * Initialize or reset the forechannel and backchannel tables
  */
@@ -5101,25 +5087,16 @@ static int nfs4_setup_session_slot_tables(struct nfs4_session *ses)
 	dprintk("--> %s\n", __func__);
 	/* Fore channel */
 	tbl = &ses->fc_slot_table;
-	if (tbl->slots == NULL) {
-		status = nfs4_init_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
-		if (status) /* -ENOMEM */
-			return status;
-	} else {
-		status = nfs4_reset_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
-		if (status)
-			return status;
-	}
+	status = nfs4_realloc_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
+	if (status) /* -ENOMEM */
+		return status;
 	/* Back channel */
 	tbl = &ses->bc_slot_table;
-	if (tbl->slots == NULL) {
-		status = nfs4_init_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
-		if (status)
-			/* Fore and back channel share a connection so get
-			 * both slot tables or neither */
-			nfs4_destroy_slot_tables(ses);
-	} else
-		status = nfs4_reset_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+	status = nfs4_realloc_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+	if (status && tbl->slots == NULL)
+		/* Fore and back channel share a connection so get
+		 * both slot tables or neither */
+		nfs4_destroy_slot_tables(ses);
 	return status;
 }
 

From abe9a6d57b4544ac208401f9c0a4262814db2be4 Mon Sep 17 00:00:00 2001
From: Weston Andros Adamson <dros@netapp.com>
Date: Thu, 16 Feb 2012 11:17:05 -0500
Subject: [PATCH 096/202] NFSv4: fix server_scope memory leak

server_scope would never be freed if nfs4_check_cl_exchange_flags() returned
non-zero

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/nfs4proc.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index b4d67feab90b..ec9f6ef6c5dd 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -4883,8 +4883,10 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred)
 				clp->cl_rpcclient->cl_auth->au_flavor);
 
 	res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL);
-	if (unlikely(!res.server_scope))
-		return -ENOMEM;
+	if (unlikely(!res.server_scope)) {
+		status = -ENOMEM;
+		goto out;
+	}
 
 	status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 	if (!status)
@@ -4901,12 +4903,13 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred)
 			clp->server_scope = NULL;
 		}
 
-		if (!clp->server_scope)
+		if (!clp->server_scope) {
 			clp->server_scope = res.server_scope;
-		else
-			kfree(res.server_scope);
+			goto out;
+		}
 	}
-
+	kfree(res.server_scope);
+out:
 	dprintk("<-- %s status= %d\n", __func__, status);
 	return status;
 }

From a92fa25c63a788758bd52e9123504d133210c8b7 Mon Sep 17 00:00:00 2001
From: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Date: Mon, 16 Jan 2012 19:30:25 -0200
Subject: [PATCH 097/202] [SCSI] ipr: fix eeh recovery for 64-bit adapters

In some scenarios, an EEH error can take a long time to be detected, since the
driver issues an MMIO read only after a device reset command times out and we
try to reset the adapter. This patch adds some code in ipr_cancel_op() to read
a hardware register so we detect the error earlier in case the op is being
aborted because of a timeout caused by a frozen adapter slot.

Another problem in such scenarios is that in __ipr_eh_host_reset() we change the
dump state flag from WAIT_FOR_DUMP to GET_DUMP, and the flag is later changed
from GET_DUMP to READ_DUMP in ipr_reset_restore_cfg_space(). However, if when
__ipr_eh_host_reset() is called by the SCSI error handling the function
ipr_reset_restore_cfg_space() has already been called by the PCI EEH code, we
end up with the flag in an inconsistent state. This patch also prevents this
problem.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/ipr.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 67b169b7a5be..b538f0883fd2 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4613,11 +4613,13 @@ static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
 	ENTER;
 	ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
 
-	dev_err(&ioa_cfg->pdev->dev,
-		"Adapter being reset as a result of error recovery.\n");
+	if (!ioa_cfg->in_reset_reload) {
+		dev_err(&ioa_cfg->pdev->dev,
+			"Adapter being reset as a result of error recovery.\n");
 
-	if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
-		ioa_cfg->sdt_state = GET_DUMP;
+		if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+			ioa_cfg->sdt_state = GET_DUMP;
+	}
 
 	rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
 
@@ -4907,7 +4909,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
 	struct ipr_ioa_cfg *ioa_cfg;
 	struct ipr_resource_entry *res;
 	struct ipr_cmd_pkt *cmd_pkt;
-	u32 ioasc;
+	u32 ioasc, int_reg;
 	int op_found = 0;
 
 	ENTER;
@@ -4920,7 +4922,17 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
 	 */
 	if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
 		return FAILED;
-	if (!res || !ipr_is_gscsi(res))
+	if (!res)
+		return FAILED;
+
+	/*
+	 * If we are aborting a timed out op, chances are that the timeout was caused
+	 * by a still not detected EEH error. In such cases, reading a register will
+	 * trigger the EEH recovery infrastructure.
+	 */
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+
+	if (!ipr_is_gscsi(res))
 		return FAILED;
 
 	list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {

From 6d7938f46f89c9773f9396c1d13b20bbc5c6d95b Mon Sep 17 00:00:00 2001
From: Dave Jiang <dave.jiang@intel.com>
Date: Fri, 27 Jan 2012 11:17:37 -0800
Subject: [PATCH 098/202] [SCSI] isci: Fix NULL ptr dereference when no
 firmware is being loaded

NULL orom ptr passed in for verification which caused page fault.
We will set a default version when we don't have orom struct.

Reported-by: Dan Melnic <dan@seamicro.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/isci/host.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 1a65d6514237..418391b1c361 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1848,9 +1848,11 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
 	if (state == SCIC_RESET ||
 	    state == SCIC_INITIALIZING ||
 	    state == SCIC_INITIALIZED) {
+		u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version :
+			ISCI_ROM_VER_1_0;
 
 		if (sci_oem_parameters_validate(&ihost->oem_parameters,
-						pci_info->orom->hdr.version))
+						oem_version))
 			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
 
 		return SCI_SUCCESS;

From a55aac79de0ea6fc52d35f535867b6573a5ff0f8 Mon Sep 17 00:00:00 2001
From: Arun Easi <arun.easi@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:03 -0800
Subject: [PATCH 099/202] [SCSI] qla2xxx: Propagate up abort failures.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4ed1e4a96b95..b4b185c7bad6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -877,6 +877,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	if (ha->isp_ops->abort_command(sp)) {
+		ret = FAILED;
 		ql_dbg(ql_dbg_taskm, vha, 0x8003,
 		    "Abort command mbx failed cmd=%p.\n", cmd);
 	} else {

From aa651be83dfec5587dabce0a9d471c1e2095c33e Mon Sep 17 00:00:00 2001
From: Chad Dupuis <chad.dupuis@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:04 -0800
Subject: [PATCH 100/202] [SCSI] qla2xxx: Add check for null fcport references
 in qla2xxx_queuecommand.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b4b185c7bad6..5fd89d761688 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -625,6 +625,12 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 			cmd->result = DID_NO_CONNECT << 16;
 			goto qc24_fail_command;
 	}
+
+	if (!fcport) {
+		cmd->result = DID_NO_CONNECT << 16;
+		goto qc24_fail_command;
+	}
+
 	if (atomic_read(&fcport->state) != FCS_ONLINE) {
 		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 			atomic_read(&base_vha->loop_state) == LOOP_DEAD) {

From d051a5aa1c234c8de01fc0a488b1a18d65246150 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:05 -0800
Subject: [PATCH 101/202] [SCSI] qla2xxx: Add an "is reset active" helper.

Many locations within the driver would use an inconsistent set of
checks to determine ISP-reset state.  Consolidate the checks into
this inline-helper.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_attr.c   | 13 +++-----
 drivers/scsi/qla2xxx/qla_bsg.c    | 50 ++++++-------------------------
 drivers/scsi/qla2xxx/qla_dbg.c    |  3 +-
 drivers/scsi/qla2xxx/qla_inline.h | 13 ++++++++
 4 files changed, 28 insertions(+), 51 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a2f1b3043dfb..9f41b3b4358f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1036,8 +1036,7 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr,
 	    vha->device_flags & DFLG_NO_CABLE)
 		len = snprintf(buf, PAGE_SIZE, "Link Down\n");
 	else if (atomic_read(&vha->loop_state) != LOOP_READY ||
-	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	    qla2x00_reset_active(vha))
 		len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
 	else {
 		len = snprintf(buf, PAGE_SIZE, "Link Up - ");
@@ -1359,8 +1358,7 @@ qla2x00_thermal_temp_show(struct device *dev,
 		return snprintf(buf, PAGE_SIZE, "\n");
 
 	temp = frac = 0;
-	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	if (qla2x00_reset_active(vha))
 		ql_log(ql_log_warn, vha, 0x707b,
 		    "ISP reset active.\n");
 	else if (!vha->hw->flags.eeh_busy)
@@ -1379,8 +1377,7 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
 	int rval = QLA_FUNCTION_FAILED;
 	uint16_t state[5];
 
-	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	if (qla2x00_reset_active(vha))
 		ql_log(ql_log_warn, vha, 0x707c,
 		    "ISP reset active.\n");
 	else if (!vha->hw->flags.eeh_busy)
@@ -1693,9 +1690,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	if (IS_FWI2_CAPABLE(ha)) {
 		rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
 	} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
-		    !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
-		    !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
-		    !ha->dpc_active) {
+	    !qla2x00_reset_active(vha) && !ha->dpc_active) {
 		/* Must be in a 'READY' state for statistics retrieval. */
 		rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
 						stats, stats_dma);
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b1d0f936bf2d..1682e2e4201d 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 		goto exit_fcp_prio_cfg;
 	}
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ret = -EBUSY;
-		goto exit_fcp_prio_cfg;
-	}
-
 	/* Get the sub command */
 	oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
 
@@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 	dma_addr_t rsp_data_dma;
 	uint32_t rsp_data_len;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!vha->flags.online) {
 		ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
 		return -EIO;
@@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job)
 	int rval = 0;
 	uint32_t flag;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
 		return -EINVAL;
@@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
 	uint32_t flag;
 	uint32_t fw_ver;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
-		return -EBUSY;
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x7032,
 		    "Not 84xx, exiting.\n");
@@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
 	uint32_t data_len = 0;
 	uint32_t dma_direction = DMA_NONE;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7039,
-		    "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_log(ql_log_warn, vha, 0x703a,
 		    "Not 84xx, exiting.\n");
@@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
 
 	bsg_job->reply->reply_payload_rcv_len = 0;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_IIDMA_CAPABLE(vha->hw)) {
 		ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
 		return -EINVAL;
@@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
 		vha = shost_priv(host);
 	}
 
+	if (qla2x00_reset_active(vha)) {
+		ql_dbg(ql_dbg_user, vha, 0x709f,
+		    "BSG: ISP abort active/needed -- cmd=%d.\n",
+		    bsg_job->request->msgcode);
+		bsg_job->reply->result = (DID_ERROR << 16);
+		bsg_job->job_done(bsg_job);
+		return -EBUSY;
+	}
+
 	ql_dbg(ql_dbg_user, vha, 0x7000,
 	    "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
 
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 7c54624b5b13..45cbf0ba624d 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -19,7 +19,8 @@
  * | DPC Thread                   |       0x401c       |		|
  * | Async Events                 |       0x5057       | 0x5052		|
  * | Timer Routines               |       0x6011       | 0x600e,0x600f  |
- * | User Space Interactions      |       0x709e       |		|
+ * | User Space Interactions      |       0x709e       | 0x7018,0x702e  |
+ * |                              |                    | 0x7039,0x7045  |
  * | Task Management              |       0x803c       | 0x8025-0x8026  |
  * |                              |                    | 0x800b,0x8039  |
  * | AER/EEH                      |       0x900f       |		|
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 9902834e0b74..7cc4f36cd539 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -131,3 +131,16 @@ qla2x00_hba_err_chk_enabled(srb_t *sp)
 	}
 	return 0;
 }
+
+static inline int
+qla2x00_reset_active(scsi_qla_host_t *vha)
+{
+	scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
+
+	/* Test appropriate base-vha and vha flags. */
+	return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
+	    test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
+	    test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
+	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
+}

From 4ba988db8d60eb16b7da69f9e3705b52ac8a6540 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:06 -0800
Subject: [PATCH 102/202] [SCSI] qla2xxx: Clear options-flags while issuing
 stop-firmware mbx command.

Not clearing the options flags in mbx1 could lead the firmware
into interpreting old data in mbx1 through mbx8.  This could
lead to inadvertent DMA read/write operations to stale memory.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 34344d3f8658..8635722332a0 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2581,7 +2581,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha)
 	ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__);
 
 	mcp->mb[0] = MBC_STOP_FIRMWARE;
-	mcp->out_mb = MBX_0;
+	mcp->mb[1] = 0;
+	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
 	mcp->tov = 5;
 	mcp->flags = 0;

From 7cb0eb1c17fa69535b6b2a80296c2f2ca300b800 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:07 -0800
Subject: [PATCH 103/202] [SCSI] qla2xxx: Remove errant clearing of
 MBX_INTERRUPT flag during CT-IOCB processing.

This can cause instability in mailbox command state machine handling.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e804585cc59c..349843ea32f6 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2090,7 +2090,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 			break;
                 case CT_IOCB_TYPE:
 			qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
-			clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
 			break;
                 case ELS_IOCB_TYPE:
 			qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);

From 67ddda353c4e26ba23a199ae64fdf283b669469b Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:08 -0800
Subject: [PATCH 104/202] [SCSI] qla2xxx: Correct out of bounds read of ISP2200
 mailbox registers.

ISP2200 adapters only have 24 mailbox registers so read only that many.

Reported-by: Olatunji Ruwase <oor@cs.cmu.edu>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_def.h | 1 +
 drivers/scsi/qla2xxx/qla_os.c  | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index a6a4eebce4a8..af1003f9de1e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -44,6 +44,7 @@
  * ISP2100 HBAs.
  */
 #define MAILBOX_REGISTER_COUNT_2100	8
+#define MAILBOX_REGISTER_COUNT_2200	24
 #define MAILBOX_REGISTER_COUNT		32
 
 #define QLA2200A_RISC_ROM_VER	4
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 5fd89d761688..7e617a60e71f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2054,7 +2054,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->nvram_data_off = ~0;
 		ha->isp_ops = &qla2100_isp_ops;
 	} else if (IS_QLA2200(ha)) {
-		ha->mbx_count = MAILBOX_REGISTER_COUNT;
+		ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
 		req_length = REQUEST_ENTRY_CNT_2200;
 		rsp_length = RESPONSE_ENTRY_CNT_2100;
 		ha->max_loop_id = SNS_LAST_LOOP_ID_2100;

From c7a992784240c1b16425c6a9606c9db0fc28fb0c Mon Sep 17 00:00:00 2001
From: Michael Christie <mchristi@redhat.com>
Date: Thu, 9 Feb 2012 11:14:09 -0800
Subject: [PATCH 105/202] [SCSI] qla2xxx: Remove check for null fcport from
 host reset handler.

Remove the check for a NULL fcport so that the host reset will run
unconditionally to unwedge any commands before the device is offlined and to
prevent a quick runthrough of the SCSI error handling.

Signed-off-by: Michael Christie <mchristi@redhat.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7e617a60e71f..036030c95339 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1131,7 +1131,6 @@ static int
 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	struct qla_hw_data *ha = vha->hw;
 	int ret = FAILED;
 	unsigned int id, lun;
@@ -1140,15 +1139,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
-	if (!fcport) {
-		return ret;
-	}
-
-	ret = fc_block_scsi_eh(cmd);
-	if (ret != 0)
-		return ret;
-	ret = FAILED;
-
 	ql_log(ql_log_info, vha, 0x8018,
 	    "ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun);
 

From d33609607c5abc0b4b31d238e33f3ab075e2f96f Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:10 -0800
Subject: [PATCH 106/202] [SCSI] qla2xxx: Complete mailbox command timedout to
 avoid initialization failures during next reset cycle.

Complete the mailbox command timed out before initiating another abort cycle
to recover so that mailbox commands issued during next reset cycle don't fail
due to pending mailbox access timeout.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 8635722332a0..08f1d01bdc1c 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -342,6 +342,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 				set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
 				clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+				/* Allow next mbx cmd to come in. */
+				complete(&ha->mbx_cmd_comp);
 				if (ha->isp_ops->abort_isp(vha)) {
 					/* Failed. retry later. */
 					set_bit(ISP_ABORT_NEEDED,
@@ -350,6 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
 				ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
 				    "Finished abort_isp.\n");
+				goto mbx_done;
 			}
 		}
 	}
@@ -358,6 +361,7 @@ premature_exit:
 	/* Allow next mbx cmd to come in. */
 	complete(&ha->mbx_cmd_comp);
 
+mbx_done:
 	if (rval) {
 		ql_dbg(ql_dbg_mbx, base_vha, 0x1020,
 		    "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n",

From 5a034bb3c33aad59769e7289716c8d1f075b3894 Mon Sep 17 00:00:00 2001
From: Shyam Sundar <shyam.sundar@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:11 -0800
Subject: [PATCH 107/202] [SCSI] qla2xxx: Remove resetting memory during device
 initialization for ISP82xx.

With IOs running and PegHalt testing the system reboots when memory reset is
performed during device initialization.

Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_nx.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 1cd46cd7ff90..bb06c20a822e 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1165,19 +1165,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
 	else
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
-
-	/* reset ms */
-	val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
-	val |= (1 << 1);
-	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
-	msleep(20);
-
-	/* unreset ms */
-	val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
-	val &= ~(1 << 1);
-	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
-	msleep(20);
-
 	qla82xx_rom_unlock(ha);
 
 	/* Read the signature value from the flash.

From 2cc97965e4f6e84792b958d4ad10631274d42834 Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:12 -0800
Subject: [PATCH 108/202] [SCSI] qla2xxx: Proper detection of firmware abort
 error code for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_nx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index bb06c20a822e..270ba3130fde 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3379,7 +3379,7 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 					    QLA82XX_CRB_PEG_NET_3 + 0x3c),
 				    qla82xx_rd_32(ha,
 					    QLA82XX_CRB_PEG_NET_4 + 0x3c));
-				if (LSW(MSB(halt_status)) == 0x67)
+				if (((halt_status & 0x1fffff00) >> 8) == 0x67)
 					ql_log(ql_log_warn, vha, 0xb052,
 					    "Firmware aborted with "
 					    "error code 0x00006700. Device is "

From 477e3e9ffc13e99918b916a294dcc2d306b677a5 Mon Sep 17 00:00:00 2001
From: Chad Dupuis <chad.dupuis@qlogic.com>
Date: Thu, 9 Feb 2012 11:14:13 -0800
Subject: [PATCH 109/202] [SCSI] qla2xxx: Update version number to
 8.03.07.13-k.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 23f33a6d52d7..29d780c38040 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.12-k"
+#define QLA2XXX_VERSION      "8.03.07.13-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3

From 267a6ad4aefaafbde607804c60945bcf97f91c1b Mon Sep 17 00:00:00 2001
From: Huajun Li <huajun.li.lee@gmail.com>
Date: Sun, 12 Feb 2012 19:59:14 +0800
Subject: [PATCH 110/202] [SCSI] scsi_scan: Fix 'Poison overwritten' warning
 caused by using freed 'shost'

In do_scan_async(), calling scsi_autopm_put_host(shost) may reference
freed shost, and cause Posison overwitten warning.
Yes, this case can happen, for example, an USB is disconnected just
when do_scan_async() thread starts to run, then scsi_host_put() called
in scsi_finish_async_scan() will lead to shost be freed(because the
refcount of shost->shost_gendev decreases to 1 after USB disconnects),
at this point, if references shost again, system will show following
warning msg.

To make scsi_autopm_put_host(shost) always reference a valid shost,
put it just before scsi_host_put() in function
scsi_finish_async_scan().

[  299.281565] =============================================================================
[  299.281634] BUG kmalloc-4096 (Tainted: G          I ): Poison overwritten
[  299.281682] -----------------------------------------------------------------------------
[  299.281684]
[  299.281752] INFO: 0xffff880056c305d0-0xffff880056c305d0. First byte
0x6a instead of 0x6b
[  299.281816] INFO: Allocated in scsi_host_alloc+0x4a/0x490 age=1688
cpu=1 pid=2004
[  299.281870] 	__slab_alloc+0x617/0x6c1
[  299.281901] 	__kmalloc+0x28c/0x2e0
[  299.281931] 	scsi_host_alloc+0x4a/0x490
[  299.281966] 	usb_stor_probe1+0x5b/0xc40 [usb_storage]
[  299.282010] 	storage_probe+0xa4/0xe0 [usb_storage]
[  299.282062] 	usb_probe_interface+0x172/0x330 [usbcore]
[  299.282105] 	driver_probe_device+0x257/0x3b0
[  299.282138] 	__driver_attach+0x103/0x110
[  299.282171] 	bus_for_each_dev+0x8e/0xe0
[  299.282201] 	driver_attach+0x26/0x30
[  299.282230] 	bus_add_driver+0x1c4/0x430
[  299.282260] 	driver_register+0xb6/0x230
[  299.282298] 	usb_register_driver+0xe5/0x270 [usbcore]
[  299.282337] 	0xffffffffa04ab03d
[  299.282364] 	do_one_initcall+0x47/0x230
[  299.282396] 	sys_init_module+0xa0f/0x1fe0
[  299.282429] INFO: Freed in scsi_host_dev_release+0x18a/0x1d0 age=85
cpu=0 pid=2008
[  299.282482] 	__slab_free+0x3c/0x2a1
[  299.282510] 	kfree+0x296/0x310
[  299.282536] 	scsi_host_dev_release+0x18a/0x1d0
[  299.282574] 	device_release+0x74/0x100
[  299.282606] 	kobject_release+0xc7/0x2a0
[  299.282637] 	kobject_put+0x54/0xa0
[  299.282668] 	put_device+0x27/0x40
[  299.282694] 	scsi_host_put+0x1d/0x30
[  299.282723] 	do_scan_async+0x1fc/0x2b0
[  299.282753] 	kthread+0xdf/0xf0
[  299.282782] 	kernel_thread_helper+0x4/0x10
[  299.282817] INFO: Slab 0xffffea00015b0c00 objects=7 used=7 fp=0x
      (null) flags=0x100000000004080
[  299.282882] INFO: Object 0xffff880056c30000 @offset=0 fp=0x          (null)
[  299.282884]
...

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Cc: stable@kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/scsi_scan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 89da43f73c00..29c4c0480976 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1815,6 +1815,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data)
 	}
 	spin_unlock(&async_scan_lock);
 
+	scsi_autopm_put_host(shost);
 	scsi_host_put(shost);
 	kfree(data);
 }
@@ -1841,7 +1842,6 @@ static int do_scan_async(void *_data)
 
 	do_scsi_scan_host(shost);
 	scsi_finish_async_scan(data);
-	scsi_autopm_put_host(shost);
 	return 0;
 }
 
@@ -1869,7 +1869,7 @@ void scsi_scan_host(struct Scsi_Host *shost)
 	p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
 	if (IS_ERR(p))
 		do_scan_async(data);
-	/* scsi_autopm_put_host(shost) is called in do_scan_async() */
+	/* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
 }
 EXPORT_SYMBOL(scsi_scan_host);
 

From fea6d607e154cf96ab22254ccb48addfd43d4cb5 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 17 Feb 2012 16:25:08 -0500
Subject: [PATCH 111/202] [SCSI] scsi_pm: Fix bug in the SCSI power management
 handler

This patch (as1520) fixes a bug in the SCSI layer's power management
implementation.

LUN scanning can be carried out asynchronously in do_scan_async(), and
sd uses an asynchronous thread for the time-consuming parts of disk
probing in sd_probe_async().  Currently nothing coordinates these
async threads with system sleep transitions; they can and do attempt
to continue scanning/probing SCSI devices even after the host adapter
has been suspended.  As one might expect, the outcome is not ideal.

This is what the "prepare" stage of system suspend was created for.
After the prepare callback has been called for a host, target, or
device, drivers are not allowed to register any children underneath
them.  Currently the SCSI prepare callback is not implemented; this
patch rectifies that omission.

For SCSI hosts, the prepare routine calls scsi_complete_async_scans()
to wait until async scanning is finished.  It might be slightly more
efficient to wait only until the host in question has been scanned,
but there's currently no way to do that.  Besides, during a sleep
transition we will ultimately have to wait until all the host scanning
has finished anyway.

For SCSI devices, the prepare routine calls async_synchronize_full()
to wait until sd probing is finished.  The routine does nothing for
SCSI targets, because asynchronous target scanning is done only as
part of host scanning.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/scsi_pm.c   | 16 ++++++++++++++++
 drivers/scsi/scsi_priv.h |  1 +
 2 files changed, 17 insertions(+)

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index bf8bf79e6a1f..c4670642d023 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -7,6 +7,7 @@
 
 #include <linux/pm_runtime.h>
 #include <linux/export.h>
+#include <linux/async.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -92,6 +93,19 @@ static int scsi_bus_resume_common(struct device *dev)
 	return err;
 }
 
+static int scsi_bus_prepare(struct device *dev)
+{
+	if (scsi_is_sdev_device(dev)) {
+		/* sd probing uses async_schedule.  Wait until it finishes. */
+		async_synchronize_full();
+
+	} else if (scsi_is_host_device(dev)) {
+		/* Wait until async scanning is finished */
+		scsi_complete_async_scans();
+	}
+	return 0;
+}
+
 static int scsi_bus_suspend(struct device *dev)
 {
 	return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
@@ -110,6 +124,7 @@ static int scsi_bus_poweroff(struct device *dev)
 #else /* CONFIG_PM_SLEEP */
 
 #define scsi_bus_resume_common		NULL
+#define scsi_bus_prepare		NULL
 #define scsi_bus_suspend		NULL
 #define scsi_bus_freeze			NULL
 #define scsi_bus_poweroff		NULL
@@ -218,6 +233,7 @@ void scsi_autopm_put_host(struct Scsi_Host *shost)
 #endif /* CONFIG_PM_RUNTIME */
 
 const struct dev_pm_ops scsi_bus_pm_ops = {
+	.prepare =		scsi_bus_prepare,
 	.suspend =		scsi_bus_suspend,
 	.resume =		scsi_bus_resume_common,
 	.freeze =		scsi_bus_freeze,
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 68eadd1c67fd..be4fa6d179b1 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -109,6 +109,7 @@ extern void scsi_exit_procfs(void);
 #endif /* CONFIG_PROC_FS */
 
 /* scsi_scan.c */
+extern int scsi_complete_async_scans(void);
 extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
 				   unsigned int, unsigned int, int);
 extern void scsi_forget_host(struct Scsi_Host *);

From 6c635224602d760c1208ada337562f40d8ae93a5 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Wed, 15 Feb 2012 14:17:29 +0000
Subject: [PATCH 112/202] builddeb: Don't create files in /tmp with predictable
 names

The current use of /tmp for file lists is insecure.  Put them under
$objtree/debian instead.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org  # 2.6.39+
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
---
 scripts/package/builddeb | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index f6cbc3ddb68b..3c6c0b14c807 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -238,14 +238,14 @@ EOF
 fi
 
 # Build header package
-(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$)
-(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$)
-(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$)
+(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > "$objtree/debian/hdrsrcfiles")
+(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> "$objtree/debian/hdrsrcfiles")
+(cd $objtree; find .config Module.symvers include scripts -type f >> "$objtree/debian/hdrobjfiles")
 destdir=$kernel_headers_dir/usr/src/linux-headers-$version
 mkdir -p "$destdir"
-(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -)
-(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -)
-rm -f /tmp/files$$ /tmp/objfiles$$
+(cd $srctree; tar -c -f - -T "$objtree/debian/hdrsrcfiles") | (cd $destdir; tar -xf -)
+(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -)
+rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles"
 arch=$(dpkg --print-architecture)
 
 cat <<EOF >> debian/control

From cd961c2ca98efbe7d738ca8720673fc03538b2b1 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 15 Feb 2012 20:28:25 +0000
Subject: [PATCH 113/202] netem: fix dequeue

commit 50612537e9 (netem: fix classful handling) added two errors in
netem_dequeue()

1) After checking skb at the head of tfifo queue for time constraints,
   it dequeues tail skb, thus adding unwanted reordering.

2) qdisc stats are updated twice per packet
   (one when packet dequeued from tfifo, once when delivered)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_netem.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index e83d61ca78ca..5da548fa7ae9 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -501,9 +501,8 @@ tfifo_dequeue:
 
 		/* if more time remaining? */
 		if (cb->time_to_send <= psched_get_time()) {
-			skb = qdisc_dequeue_tail(sch);
-			if (unlikely(!skb))
-				goto qdisc_dequeue;
+			__skb_unlink(skb, &sch->q);
+			sch->qstats.backlog -= qdisc_pkt_len(skb);
 
 #ifdef CONFIG_NET_CLS_ACT
 			/*
@@ -539,7 +538,6 @@ deliver:
 		qdisc_watchdog_schedule(&q->watchdog, cb->time_to_send);
 	}
 
-qdisc_dequeue:
 	if (q->qdisc) {
 		skb = q->qdisc->ops->dequeue(q->qdisc);
 		if (skb)

From 11aad99af6ef629ff3b05d1c9f0936589b204316 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 15 Feb 2012 20:43:11 +0000
Subject: [PATCH 114/202] atl1c: dont use highprio tx queue

This driver attempts to use two TX rings but lacks proper support :

1) IRQ handler only takes care of TX completion on first TX ring
2) the stop/start logic uses the legacy functions (for non multiqueue
drivers)

This means all packets witk skb mark set to 1 are sent through high
queue but are never cleaned and queue eventualy fills and block the
device, triggering the infamous "NETDEV WATCHDOG" message.

Lets use a single TX ring to fix the problem, this driver is not a real
multiqueue one yet.

Minimal fix for stable kernels.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index b8591246eb4c..1ff3c6df35a2 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
 			dev_info(&adapter->pdev->dev, "tx locked\n");
 		return NETDEV_TX_LOCKED;
 	}
-	if (skb->mark == 0x01)
-		type = atl1c_trans_high;
-	else
-		type = atl1c_trans_normal;
 
 	if (atl1c_tpd_avail(adapter, type) < tpd_req) {
 		/* no enough descriptor, just stop queue */

From b203262de63c56393d09e254242b57c002d8619d Mon Sep 17 00:00:00 2001
From: Neil Horman <nhorman@tuxdriver.com>
Date: Thu, 16 Feb 2012 01:48:56 +0000
Subject: [PATCH 115/202] vmxnet3: cap copy length at size of skb to prevent
 dropped frames on tx

I was recently shown that vmxnet3 devices on transmit, will drop very small udp
frames consistently.  This is due to a regression introduced by commit
39d4a96fd7d2926e46151adbd18b810aeeea8ec0.  This commit attempts to introduce an
optimization to the tx path, indicating that the underlying hardware behaves
optimally when at least 54 bytes of header data are available for direct access.
This causes problems however, if the entire frame is less than 54 bytes long.
The subsequent pskb_may_pull in vmxnet3_parse_and_copy_hdr fails, causing an
error return code, which leads to vmxnet3_tq_xmit dropping the frame.

Fix it by placing a cap on the copy length.  For frames longer than 54 bytes, we
do the pull as we normally would.  If the frame is shorter than that, copy the
whole frame, but no more.  This ensures that we still get the optimization for
qualifying frames, but don't do any damange for frames that are too short.

Also, since I'm unable to do this, it wuold be great if vmware could follow up
this patch with some additional code commentary as to why 54 bytes is an optimal
pull length for a virtual NIC driver.  The comment that introduced this was
vague on that.  Thanks!

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Max Matveev <mmatveev@redhat.com>
CC: Max Matveev <mmatveev@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index de7fc345148a..3dcd3857a36c 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -843,8 +843,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 				/* for simplicity, don't copy L4 headers */
 				ctx->l4_hdr_size = 0;
 			}
-			ctx->copy_size = ctx->eth_ip_hdr_size +
-					 ctx->l4_hdr_size;
+			ctx->copy_size = min(ctx->eth_ip_hdr_size +
+					 ctx->l4_hdr_size, skb->len);
 		} else {
 			ctx->eth_ip_hdr_size = 0;
 			ctx->l4_hdr_size = 0;

From 32aa64f77e032511079fec5ec0465aeb6d6c3891 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Thu, 16 Feb 2012 20:44:33 +0000
Subject: [PATCH 116/202] net/ethernet: ks8851_mll: signedness bug in
 ks8851_probe()

netdev->irq is unsigned, so it's never less than zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/micrel/ks8851_mll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 231176fcd2ba..2784bc706f1e 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -1545,7 +1545,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
 
 	netdev->irq = platform_get_irq(pdev, 0);
 
-	if (netdev->irq < 0) {
+	if ((int)netdev->irq < 0) {
 		err = netdev->irq;
 		goto err_get_irq;
 	}

From 8ae0cfee2a727f698bda12e530f4879a9793c6c9 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sun, 19 Feb 2012 09:43:32 +0000
Subject: [PATCH 117/202] drivers/atm/solos-pci.c: exchange pci_iounmaps

The calls to pci_iounmap are in the wrong order, as compared to the
associated calls to pci_iomap.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,x;
statement S,S1;
int ret;
@@
e = pci_iomap(x,...)
... when != pci_iounmap(x,e)
if (<+...e...+>) S
... when any
    when != pci_iounmap(x,e)
*if (...)
   { ... when != pci_iounmap(x,e)
     return ...; }
... when any
pci_iounmap(x,e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/atm/solos-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 5d1d07645132..e8cd652d2017 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	
  out_unmap_both:
 	pci_set_drvdata(dev, NULL);
-	pci_iounmap(dev, card->config_regs);
- out_unmap_config:
 	pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+	pci_iounmap(dev, card->config_regs);
  out_release_regions:
 	pci_release_regions(dev);
  out:

From 64f0a836f600e9c31ffd511713ab5d328aa96ac8 Mon Sep 17 00:00:00 2001
From: Nikola Pajkovsky <n.pajkovsky@gmail.com>
Date: Sun, 19 Feb 2012 10:47:43 +0000
Subject: [PATCH 118/202] b44: remove __exit from b44_pci_exit()

WARNING: drivers/net/ethernet/broadcom/built-in.o(.init.text+0x5d): Section mismatch in reference from the function b44_init() to the function .exit.text:b44_pci_exit()

module exits with b44_cleanup()

Signed-off-by: Nikola Pajkovsky <n.pajkovsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/b44.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 3fb66d09ece5..cab87456a34a 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void)
 	return err;
 }
 
-static inline void __exit b44_pci_exit(void)
+static inline void b44_pci_exit(void)
 {
 #ifdef CONFIG_B44_PCI
 	ssb_pcihost_unregister(&b44_pci_driver);

From a7762b10c12a70c5dbf2253142764b728ac88c3a Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Wed, 15 Feb 2012 17:51:56 +0100
Subject: [PATCH 119/202] can: sja1000: fix isr hang when hw is unplugged under
 load

In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the
hardware can cause an infinite loop in the common sja1000 isr.

Use the already retrieved status register to indicate a possible hardware
removal and double check by reading the mode register in sja1000_is_absent.

Cc: stable@kernel.org [3.2+]
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/sja1000.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 04a3f1b756a8..192b0d118df4 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+	return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
 static int sja1000_probe_chip(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+	if (priv->reg_base && sja1000_is_absent(priv)) {
 		printk(KERN_INFO "%s: probing @0x%lX failed\n",
 		       DRV_NAME, dev->base_addr);
 		return 0;
@@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 		n++;
 		status = priv->read_reg(priv, REG_SR);
+		/* check for absent controller due to hw unplug */
+		if (status == 0xFF && sja1000_is_absent(priv))
+			return IRQ_NONE;
 
 		if (isrc & IRQ_WUI)
 			dev_warn(dev->dev.parent, "wakeup interrupt\n");
@@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
 				status = priv->read_reg(priv, REG_SR);
+				/* check for absent controller */
+				if (status == 0xFF && sja1000_is_absent(priv))
+					return IRQ_NONE;
 			}
 		}
 		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {

From 3d7474734b220ccbf9997ea484d0bcd4f7ab8549 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Sun, 19 Feb 2012 21:38:52 +0000
Subject: [PATCH 120/202] mlx4_core: Do not map BF area if capability is 0

BF can be disabled in some cases, the capability field, bf_reg_size is set
to zero in this case. Don't map the BF area in this case, it would cause
failures.  In addition, leaving the BF area unmapped
also alerts the ETH driver to not use BF.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 678558b502fc..9c5fbad513f8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -986,6 +986,9 @@ static int map_bf_area(struct mlx4_dev *dev)
 	resource_size_t bf_len;
 	int err = 0;
 
+	if (!dev->caps.bf_reg_size)
+		return -ENXIO;
+
 	bf_start = pci_resource_start(dev->pdev, 2) +
 			(dev->caps.num_uars << PAGE_SHIFT);
 	bf_len = pci_resource_len(dev->pdev, 2) -

From 910ba598c818243cf3de2f97e03c49948bbb0511 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Tue, 21 Feb 2012 10:24:22 +0100
Subject: [PATCH 121/202] ARM: 7336/1: smp_twd: Don't register CPUFREQ
 notifiers if local timers are not initialised

Current ARM local timer code registers CPUFREQ notifiers even in case
the twd_timer_setup() isn't called. That seems to be wrong and
would eventually lead to kernel crash on the CPU frequency transitions
on the SOCs where the local timer doesn't exist or broken because of
hardware BUG. Fix it by testing twd_evt and *__this_cpu_ptr(twd_evt).

The issue was observed with v3.3-rc3 and building an OMAP2+ kernel
on OMAP3 SOC which doesn't have TWD.

Below is the dump for reference :

 Unable to handle kernel paging request at virtual address 007e900
 pgd = cdc20000
 [007e9000] *pgd=00000000
 Internal error: Oops: 5 [#1] SMP
 Modules linked in:
 CPU: 0    Not tainted  (3.3.0-rc3-pm+debug+initramfs #9)
 PC is at twd_update_frequency+0x34/0x48
 LR is at twd_update_frequency+0x10/0x48
 pc : [<c001382c>]    lr : [<c0013808>]    psr: 60000093
 sp : ce311dd8  ip : 00000000  fp : 00000000
 r10: 00000000  r9 : 00000001  r8 : ce310000
 r7 : c0440458  r6 : c00137f8  r5 : 00000000  r4 : c0947a74
 r3 : 00000000  r2 : 007e9000  r1 : 00000000  r0 : 00000000
 Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment usr
 Control: 10c5387d  Table: 8dc20019  DAC: 00000015
 Process sh (pid: 599, stack limit = 0xce3102f8)
 Stack: (0xce311dd8 to 0xce312000)
 1dc0:                                                       6000c
 1de0: 00000001 00000002 00000000 00000000 00000000 00000000 00000
 1e00: ffffffff c093d8f0 00000000 ce311ebc 00000001 00000001 ce310
 1e20: c001386c c0437c4c c0e95b60 c0e95ba8 00000001 c0e95bf8 ffff4
 1e40: 00000000 00000000 c005ef74 ce310000 c0435cf0 ce311ebc 00000
 1e60: ce352b40 0007a120 c08d5108 c08ba040 c08ba040 c005f030 00000
 1e80: c08bc554 c032fe2c 0007a120 c08d4b64 ce352b40 c08d8618 ffff8
 1ea0: c08ba040 c033364c ce311ecc c0433b50 00000002 ffffffea c0330
 1ec0: 0007a120 0007a120 22222201 00000000 22222222 00000000 ce357
 1ee0: ce3d6000 cdc2aed8 ce352ba0 c0470164 00000002 c032f47c 00034
 1f00: c0331cac ce352b40 00000007 c032f6d0 ce352bbc 0003d090 c0930
 1f20: c093d8bc c03306a4 00000007 ce311f80 00000007 cdc2aec0 ce358
 1f40: ce8d20c0 00000007 b6fe5000 ce311f80 00000007 ce310000 0000c
 1f60: c000de74 ce987400 ce8d20c0 b6fe5000 00000000 00000000 0000c
 1f80: 00000000 00000000 001fbac8 00000000 00000007 001fbac8 00004
 1fa0: c000df04 c000dd60 00000007 001fbac8 00000001 b6fe5000 00000
 1fc0: 00000007 001fbac8 00000007 00000004 b6fe5000 00000000 00202
 1fe0: 00000000 beb565f8 00101ffc 00008e8c 60000010 00000001 00000
 [<c001382c>] (twd_update_frequency+0x34/0x48) from [<c008ac4c>] )
 [<c008ac4c>] (smp_call_function_single+0x17c/0x1c8) from [<c0013)
 [<c0013890>] (twd_cpufreq_transition+0x24/0x30) from [<c0437c4c>)
 [<c0437c4c>] (notifier_call_chain+0x44/0x84) from [<c005efe4>] ()
 [<c005efe4>] (__srcu_notifier_call_chain+0x70/0xa4) from [<c005f)
 [<c005f030>] (srcu_notifier_call_chain+0x18/0x20) from [<c032fe2)
 [<c032fe2c>] (cpufreq_notify_transition+0xc8/0x1b0) from [<c0333)
 [<c033364c>] (omap_target+0x1b4/0x28c) from [<c032f47c>] (__cpuf)
 [<c032f47c>] (__cpufreq_driver_target+0x50/0x64) from [<c0331d24)
 [<c0331d24>] (cpufreq_set+0x78/0x98) from [<c032f6d0>] (store_sc)
 [<c032f6d0>] (store_scaling_setspeed+0x5c/0x74) from [<c03306a4>)
 [<c03306a4>] (store+0x58/0x74) from [<c014d868>] (sysfs_write_fi)
 [<c014d868>] (sysfs_write_file+0x80/0xb4) from [<c00f2c2c>] (vfs)
 [<c00f2c2c>] (vfs_write+0xa8/0x138) from [<c00f2e9c>] (sys_write)
 [<c00f2e9c>] (sys_write+0x40/0x6c) from [<c000dd60>] (ret_fast_s)
 Code: e594300c e792210c e1a01000 e5840004 (e7930002)
 ---[ end trace 5da3b5167c1ecdda ]---

Reported-by: Kevin Hilman <khilman@ti.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp_twd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 4285daa077b0..7a79b24597b2 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 

From e23e8c0690d2952dce53e712d01d5b2179f98b64 Mon Sep 17 00:00:00 2001
From: Myron Stowe <mstowe@redhat.com>
Date: Tue, 7 Feb 2012 15:26:44 -0700
Subject: [PATCH 122/202] ARM/PCI: Remove ARM's duplicate definition of
 'pcibios_max_latency'

The patch series to re-factor PCI's 'latency timer' setup (re:
http://marc.info/?l=linux-kernel&m=131983853831049&w=2) forgot to
remove the ARM specific definition of 'pcibios_max_latency' once such
had been moved into the pci core resulting in ARM related compile
errors -
  drivers/built-in.o:(.data+0x230): multiple definition of
  `pcibios_max_latency'
  arch/arm/common/built-in.o:(.data+0x40c): first defined here
  make[1]: *** [vmlinux.o] Error 1

In the series, patch 2/16 (commit 168c8619fd8) converted the ARM
specific version of 'pcibios_set_master()' to a non-inlined version.
This was done in preperation for hosting it up into PCI's core, which
was done in patch 10/16 (commit 96c5590058d) of the series (and
where the removal of ARM's 'pcibios_max_latency' was overlooked).

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/it8152.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13ebc..fb1f1cfce60c 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */

From 3ddd4d0c629f3d013aa1ab24bb0546dfe342ff94 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 15 Feb 2012 11:28:06 +0000
Subject: [PATCH 123/202] ARM: OMAP: fix voltage domain build errors with
 PM_OPP disabled

The voltage domain code wants the voltage tables, which are in the
opp*.c files.  These files aren't built when PM_OPP is disabled,
causing the following build errors at link time:

twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data'
twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data'
twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data'

Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 ++
 arch/arm/mach-omap2/voltagedomains44xx_data.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f5e383..57db2038b23c 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d022595d..c3115f6853d4 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;

From e555cf363167f09efae96d32a363e24c4de16b7b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon, 20 Feb 2012 20:14:16 -0800
Subject: [PATCH 124/202] ASoC: ak4642: fixup HeadPhone L/R dapm settings

Current ak4642 driver had wrong dapm settings for headphone L/R.
If you select headphone L, and select R after that,
headphone L setting was removed by R settings.

This patch fixes it up.
It provides just "Headphone Enable" to user side

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/ak4642.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index 5ef70b5d27e4..278c0a0575f5 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -146,13 +146,10 @@ static const struct snd_kcontrol_new ak4642_snd_controls[] = {
 
 	SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC,
 			 0, 0xFF, 1, out_tlv),
-
-	SOC_SINGLE("Headphone Switch", PW_MGMT2, 6, 1, 0),
 };
 
-static const struct snd_kcontrol_new ak4642_hpout_mixer_controls[] = {
-	SOC_DAPM_SINGLE("DACH", MD_CTL4, 0, 1, 0),
-};
+static const struct snd_kcontrol_new ak4642_headphone_control =
+	SOC_DAPM_SINGLE("Switch", PW_MGMT2, 6, 1, 0);
 
 static const struct snd_kcontrol_new ak4642_lout_mixer_controls[] = {
 	SOC_DAPM_SINGLE("DACL", SG_SL1, 4, 1, 0),
@@ -165,13 +162,12 @@ static const struct snd_soc_dapm_widget ak4642_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("HPOUTR"),
 	SND_SOC_DAPM_OUTPUT("LINEOUT"),
 
-	SND_SOC_DAPM_MIXER("HPOUTL Mixer", PW_MGMT2, 5, 0,
-			   &ak4642_hpout_mixer_controls[0],
-			   ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+	SND_SOC_DAPM_PGA("HPL Out", PW_MGMT2, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("HPR Out", PW_MGMT2, 4, 0, NULL, 0),
+	SND_SOC_DAPM_SWITCH("Headphone Enable", SND_SOC_NOPM, 0, 0,
+			    &ak4642_headphone_control),
 
-	SND_SOC_DAPM_MIXER("HPOUTR Mixer", PW_MGMT2, 4, 0,
-			   &ak4642_hpout_mixer_controls[0],
-			   ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+	SND_SOC_DAPM_PGA("DACH", MD_CTL4, 0, 0, NULL, 0),
 
 	SND_SOC_DAPM_MIXER("LINEOUT Mixer", PW_MGMT1, 3, 0,
 			   &ak4642_lout_mixer_controls[0],
@@ -184,12 +180,17 @@ static const struct snd_soc_dapm_widget ak4642_dapm_widgets[] = {
 static const struct snd_soc_dapm_route ak4642_intercon[] = {
 
 	/* Outputs */
-	{"HPOUTL", NULL, "HPOUTL Mixer"},
-	{"HPOUTR", NULL, "HPOUTR Mixer"},
+	{"HPOUTL", NULL, "HPL Out"},
+	{"HPOUTR", NULL, "HPR Out"},
 	{"LINEOUT", NULL, "LINEOUT Mixer"},
 
-	{"HPOUTL Mixer", "DACH", "DAC"},
-	{"HPOUTR Mixer", "DACH", "DAC"},
+	{"HPL Out", NULL, "Headphone Enable"},
+	{"HPR Out", NULL, "Headphone Enable"},
+
+	{"Headphone Enable", "Switch", "DACH"},
+
+	{"DACH", NULL, "DAC"},
+
 	{"LINEOUT Mixer", "DACL", "DAC"},
 };
 

From 88ba136d6635b262f77cc418d536115fb8e4d4ab Mon Sep 17 00:00:00 2001
From: Joerg Willmann <joe@clnt.de>
Date: Tue, 21 Feb 2012 13:26:14 +0100
Subject: [PATCH 125/202] netfilter: ebtables: fix alignment problem in ppc

ebt_among extension of ebtables uses __alignof__(_xt_align) while the
corresponding kernel module uses __alignof__(ebt_replace) to determine
the alignment in EBT_ALIGN().

These are the results of these values on different platforms:

x86 x86_64 ppc
__alignof__(_xt_align) 4 8 8
__alignof__(ebt_replace) 4 8 4

ebtables fails to add rules which use the among extension.

I'm using kernel 2.6.33 and ebtables 2.0.10-4

According to Bart De Schuymer, userspace alignment was changed to
_xt_align to fix an alignment issue on a userspace32-kernel64 system
(he thinks it was for an ARM device). So userspace must be right.
The kernel alignment macro needs to change so it also uses _xt_align
instead of ebt_replace. The userspace changes date back from
June 29, 2009.

Signed-off-by: Joerg Willmann <joe@clnt.de>
Signed-off by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 include/linux/netfilter_bridge/ebtables.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index 8797ed16feb2..4dd5bd6994a8 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -285,8 +285,8 @@ struct ebt_table {
 	struct module *me;
 };
 
-#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
-		     ~(__alignof__(struct ebt_replace)-1))
+#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \
+		     ~(__alignof__(struct _xt_align)-1))
 extern struct ebt_table *ebt_register_table(struct net *net,
 					    const struct ebt_table *table);
 extern void ebt_unregister_table(struct net *net, struct ebt_table *table);

From 692e5759a43b916f0b66bcb39b2957499992381e Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 16 Feb 2012 18:34:36 +0800
Subject: [PATCH 126/202] Btrfs: be less strict on finding next node in
 clear_extent_bit

In clear_extent_bit, it is enough that next node is adjacent in tree level.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
---
 fs/btrfs/extent_io.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 37259ff5cd71..45ca8f9b0d61 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -582,8 +582,7 @@ next:
 	if (start <= end && next_node) {
 		state = rb_entry(next_node, struct extent_state,
 				 rb_node);
-		if (state->start == start)
-			goto hit_next;
+		goto hit_next;
 	}
 	goto search_again;
 

From af14cca162ddcdea017b648c21b9b091e4bf1fa4 Mon Sep 17 00:00:00 2001
From: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Date: Tue, 21 Feb 2012 14:53:57 +0100
Subject: [PATCH 127/202] netfilter: ctnetlink: fix soft lockup when netlink
 adds new entries

Marcell Zambo and Janos Farago noticed and reported that when
new conntrack entries are added via netlink and the conntrack table
gets full, soft lockup happens. This is because the nf_conntrack_lock
is held while nf_conntrack_alloc is called, which is in turn wants
to lock nf_conntrack_lock while evicting entries from the full table.

The patch fixes the soft lockup with limiting the holding of the
nf_conntrack_lock to the minimum, where it's absolutely required.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 net/netfilter/nf_conntrack_netlink.c | 43 +++++++++++-----------------
 1 file changed, 16 insertions(+), 27 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 9307b033c0c9..cc705175765c 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1367,15 +1367,12 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 						    nf_ct_protonum(ct));
 		if (helper == NULL) {
 			rcu_read_unlock();
-			spin_unlock_bh(&nf_conntrack_lock);
 #ifdef CONFIG_MODULES
 			if (request_module("nfct-helper-%s", helpname) < 0) {
-				spin_lock_bh(&nf_conntrack_lock);
 				err = -EOPNOTSUPP;
 				goto err1;
 			}
 
-			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			helper = __nf_conntrack_helper_find(helpname,
 							    nf_ct_l3num(ct),
@@ -1469,7 +1466,10 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 		tstamp->start = ktime_to_ns(ktime_get_real());
 
 	add_timer(&ct->timeout);
+	spin_lock_bh(&nf_conntrack_lock);
 	nf_conntrack_hash_insert(ct);
+	nf_conntrack_get(&ct->ct_general);
+	spin_unlock_bh(&nf_conntrack_lock);
 	rcu_read_unlock();
 
 	return ct;
@@ -1490,6 +1490,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple otuple, rtuple;
 	struct nf_conntrack_tuple_hash *h = NULL;
 	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
+	struct nf_conn *ct;
 	u_int8_t u3 = nfmsg->nfgen_family;
 	u16 zone;
 	int err;
@@ -1512,25 +1513,22 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 
 	spin_lock_bh(&nf_conntrack_lock);
 	if (cda[CTA_TUPLE_ORIG])
-		h = __nf_conntrack_find(net, zone, &otuple);
+		h = nf_conntrack_find_get(net, zone, &otuple);
 	else if (cda[CTA_TUPLE_REPLY])
-		h = __nf_conntrack_find(net, zone, &rtuple);
+		h = nf_conntrack_find_get(net, zone, &rtuple);
+	spin_unlock_bh(&nf_conntrack_lock);
 
 	if (h == NULL) {
 		err = -ENOENT;
 		if (nlh->nlmsg_flags & NLM_F_CREATE) {
-			struct nf_conn *ct;
 			enum ip_conntrack_events events;
 
 			ct = ctnetlink_create_conntrack(net, zone, cda, &otuple,
 							&rtuple, u3);
-			if (IS_ERR(ct)) {
-				err = PTR_ERR(ct);
-				goto out_unlock;
-			}
+			if (IS_ERR(ct))
+				return PTR_ERR(ct);
+
 			err = 0;
-			nf_conntrack_get(&ct->ct_general);
-			spin_unlock_bh(&nf_conntrack_lock);
 			if (test_bit(IPS_EXPECTED_BIT, &ct->status))
 				events = IPCT_RELATED;
 			else
@@ -1545,23 +1543,19 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
 			nf_ct_put(ct);
-		} else
-			spin_unlock_bh(&nf_conntrack_lock);
+		}
 
 		return err;
 	}
 	/* implicit 'else' */
 
-	/* We manipulate the conntrack inside the global conntrack table lock,
-	 * so there's no need to increase the refcount */
 	err = -EEXIST;
+	ct = nf_ct_tuplehash_to_ctrack(h);
 	if (!(nlh->nlmsg_flags & NLM_F_EXCL)) {
-		struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
-
+		spin_lock_bh(&nf_conntrack_lock);
 		err = ctnetlink_change_conntrack(ct, cda);
+		spin_unlock_bh(&nf_conntrack_lock);
 		if (err == 0) {
-			nf_conntrack_get(&ct->ct_general);
-			spin_unlock_bh(&nf_conntrack_lock);
 			nf_conntrack_eventmask_report((1 << IPCT_REPLY) |
 						      (1 << IPCT_ASSURED) |
 						      (1 << IPCT_HELPER) |
@@ -1570,15 +1564,10 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      (1 << IPCT_MARK),
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
-			nf_ct_put(ct);
-		} else
-			spin_unlock_bh(&nf_conntrack_lock);
-
-		return err;
+		}
 	}
 
-out_unlock:
-	spin_unlock_bh(&nf_conntrack_lock);
+	nf_ct_put(ct);
 	return err;
 }
 

From 20f12d8ac01917d96860f352f67eddd912df0afb Mon Sep 17 00:00:00 2001
From: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Date: Mon, 6 Feb 2012 12:50:07 +0000
Subject: [PATCH 128/202] xfs: change available ranges of softlimit and
 hardlimit in quota check

In general, quota allows us to use disk blocks and inodes up to each
limit, that is, they are available if they don't exceed their limitations.
Current xfs sets their available ranges to lower than them except disk
inode quota check. So, this patch changes the ranges to not beyond them.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
---
 fs/xfs/xfs_dquot.c       | 24 ++++++++++++------------
 fs/xfs/xfs_log_recover.c |  6 +++---
 fs/xfs/xfs_qm_syscalls.c |  4 ++--
 fs/xfs/xfs_trans_dquot.c |  4 ++--
 4 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index cbcb7bea38e2..53db20ee3e77 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -139,10 +139,10 @@ xfs_qm_adjust_dqtimers(
 
 	if (!d->d_btimer) {
 		if ((d->d_blk_softlimit &&
-		     (be64_to_cpu(d->d_bcount) >=
+		     (be64_to_cpu(d->d_bcount) >
 		      be64_to_cpu(d->d_blk_softlimit))) ||
 		    (d->d_blk_hardlimit &&
-		     (be64_to_cpu(d->d_bcount) >=
+		     (be64_to_cpu(d->d_bcount) >
 		      be64_to_cpu(d->d_blk_hardlimit)))) {
 			d->d_btimer = cpu_to_be32(get_seconds() +
 					mp->m_quotainfo->qi_btimelimit);
@@ -151,10 +151,10 @@ xfs_qm_adjust_dqtimers(
 		}
 	} else {
 		if ((!d->d_blk_softlimit ||
-		     (be64_to_cpu(d->d_bcount) <
+		     (be64_to_cpu(d->d_bcount) <=
 		      be64_to_cpu(d->d_blk_softlimit))) &&
 		    (!d->d_blk_hardlimit ||
-		    (be64_to_cpu(d->d_bcount) <
+		    (be64_to_cpu(d->d_bcount) <=
 		     be64_to_cpu(d->d_blk_hardlimit)))) {
 			d->d_btimer = 0;
 		}
@@ -162,10 +162,10 @@ xfs_qm_adjust_dqtimers(
 
 	if (!d->d_itimer) {
 		if ((d->d_ino_softlimit &&
-		     (be64_to_cpu(d->d_icount) >=
+		     (be64_to_cpu(d->d_icount) >
 		      be64_to_cpu(d->d_ino_softlimit))) ||
 		    (d->d_ino_hardlimit &&
-		     (be64_to_cpu(d->d_icount) >=
+		     (be64_to_cpu(d->d_icount) >
 		      be64_to_cpu(d->d_ino_hardlimit)))) {
 			d->d_itimer = cpu_to_be32(get_seconds() +
 					mp->m_quotainfo->qi_itimelimit);
@@ -174,10 +174,10 @@ xfs_qm_adjust_dqtimers(
 		}
 	} else {
 		if ((!d->d_ino_softlimit ||
-		     (be64_to_cpu(d->d_icount) <
+		     (be64_to_cpu(d->d_icount) <=
 		      be64_to_cpu(d->d_ino_softlimit)))  &&
 		    (!d->d_ino_hardlimit ||
-		     (be64_to_cpu(d->d_icount) <
+		     (be64_to_cpu(d->d_icount) <=
 		      be64_to_cpu(d->d_ino_hardlimit)))) {
 			d->d_itimer = 0;
 		}
@@ -185,10 +185,10 @@ xfs_qm_adjust_dqtimers(
 
 	if (!d->d_rtbtimer) {
 		if ((d->d_rtb_softlimit &&
-		     (be64_to_cpu(d->d_rtbcount) >=
+		     (be64_to_cpu(d->d_rtbcount) >
 		      be64_to_cpu(d->d_rtb_softlimit))) ||
 		    (d->d_rtb_hardlimit &&
-		     (be64_to_cpu(d->d_rtbcount) >=
+		     (be64_to_cpu(d->d_rtbcount) >
 		      be64_to_cpu(d->d_rtb_hardlimit)))) {
 			d->d_rtbtimer = cpu_to_be32(get_seconds() +
 					mp->m_quotainfo->qi_rtbtimelimit);
@@ -197,10 +197,10 @@ xfs_qm_adjust_dqtimers(
 		}
 	} else {
 		if ((!d->d_rtb_softlimit ||
-		     (be64_to_cpu(d->d_rtbcount) <
+		     (be64_to_cpu(d->d_rtbcount) <=
 		      be64_to_cpu(d->d_rtb_softlimit))) &&
 		    (!d->d_rtb_hardlimit ||
-		     (be64_to_cpu(d->d_rtbcount) <
+		     (be64_to_cpu(d->d_rtbcount) <=
 		      be64_to_cpu(d->d_rtb_hardlimit)))) {
 			d->d_rtbtimer = 0;
 		}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 15ff5392fb65..0ed9ee77937c 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1981,7 +1981,7 @@ xfs_qm_dqcheck(
 
 	if (!errs && ddq->d_id) {
 		if (ddq->d_blk_softlimit &&
-		    be64_to_cpu(ddq->d_bcount) >=
+		    be64_to_cpu(ddq->d_bcount) >
 				be64_to_cpu(ddq->d_blk_softlimit)) {
 			if (!ddq->d_btimer) {
 				if (flags & XFS_QMOPT_DOWARN)
@@ -1992,7 +1992,7 @@ xfs_qm_dqcheck(
 			}
 		}
 		if (ddq->d_ino_softlimit &&
-		    be64_to_cpu(ddq->d_icount) >=
+		    be64_to_cpu(ddq->d_icount) >
 				be64_to_cpu(ddq->d_ino_softlimit)) {
 			if (!ddq->d_itimer) {
 				if (flags & XFS_QMOPT_DOWARN)
@@ -2003,7 +2003,7 @@ xfs_qm_dqcheck(
 			}
 		}
 		if (ddq->d_rtb_softlimit &&
-		    be64_to_cpu(ddq->d_rtbcount) >=
+		    be64_to_cpu(ddq->d_rtbcount) >
 				be64_to_cpu(ddq->d_rtb_softlimit)) {
 			if (!ddq->d_rtbtimer) {
 				if (flags & XFS_QMOPT_DOWARN)
diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c
index eafbcff81f3a..711a86e39ff0 100644
--- a/fs/xfs/xfs_qm_syscalls.c
+++ b/fs/xfs/xfs_qm_syscalls.c
@@ -813,11 +813,11 @@ xfs_qm_export_dquot(
 	     (XFS_IS_OQUOTA_ENFORCED(mp) &&
 			(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
 	    dst->d_id != 0) {
-		if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) &&
+		if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) &&
 		    (dst->d_blk_softlimit > 0)) {
 			ASSERT(dst->d_btimer != 0);
 		}
-		if (((int) dst->d_icount >= (int) dst->d_ino_softlimit) &&
+		if (((int) dst->d_icount > (int) dst->d_ino_softlimit) &&
 		    (dst->d_ino_softlimit > 0)) {
 			ASSERT(dst->d_itimer != 0);
 		}
diff --git a/fs/xfs/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c
index 4d00ee67792d..85255536b4b6 100644
--- a/fs/xfs/xfs_trans_dquot.c
+++ b/fs/xfs/xfs_trans_dquot.c
@@ -649,12 +649,12 @@ xfs_trans_dqresv(
 			 * nblks.
 			 */
 			if (hardlimit > 0ULL &&
-			    hardlimit <= nblks + *resbcountp) {
+			    hardlimit < nblks + *resbcountp) {
 				xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN);
 				goto error_return;
 			}
 			if (softlimit > 0ULL &&
-			    softlimit <= nblks + *resbcountp) {
+			    softlimit < nblks + *resbcountp) {
 				if ((timer != 0 && get_seconds() > timer) ||
 				    (warns != 0 && warns >= warnlimit)) {
 					xfs_quota_warn(mp, dqp,

From c922bbc819324558e61402a7a76c10c550ca61bc Mon Sep 17 00:00:00 2001
From: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Date: Mon, 6 Feb 2012 12:50:30 +0000
Subject: [PATCH 129/202] xfs: make inode quota check more general

The xfs checks quota when reserving disk blocks and inodes. In the block
reservation, it checks if the total number of blocks including current
usage and new reservation exceed quota. In the inode reservation,
it checks using the total number of inodes including only current usage
without new reservation. However, this inode quota check works well
since the caller of xfs_trans_dquot() always sets the argument of the
number of new inode reservation to 1 or 0 and inode is reserved one by
one in current xfs.

To make it more general, this patch changes it to the same way as the
block quota check.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
---
 fs/xfs/xfs_trans_dquot.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c
index 85255536b4b6..c4ba366d24e6 100644
--- a/fs/xfs/xfs_trans_dquot.c
+++ b/fs/xfs/xfs_trans_dquot.c
@@ -677,11 +677,13 @@ xfs_trans_dqresv(
 			if (!softlimit)
 				softlimit = q->qi_isoftlimit;
 
-			if (hardlimit > 0ULL && count >= hardlimit) {
+			if (hardlimit > 0ULL &&
+			    hardlimit < ninos + count) {
 				xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN);
 				goto error_return;
 			}
-			if (softlimit > 0ULL && count >= softlimit) {
+			if (softlimit > 0ULL &&
+			    softlimit < ninos + count) {
 				if  ((timer != 0 && get_seconds() > timer) ||
 				     (warns != 0 && warns >= warnlimit)) {
 					xfs_quota_warn(mp, dqp,

From 5180bb392a8aab5233e6db858ac1d8371533e20f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Tue, 21 Feb 2012 11:26:55 -0500
Subject: [PATCH 130/202] ARM/audit: include audit header and fix audit arch

Both bugs being fixed were introduced in:
29ef73b7a823b77a7cd0bdd7d7cded3fb6c2587b

Include linux/audit.h to fix below build errors:

  CC      arch/arm/kernel/ptrace.o
arch/arm/kernel/ptrace.c: In function 'syscall_trace':
arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit'
arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry'
arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function)
arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once
arch/arm/kernel/ptrace.c:921: error: for each function it appears in.)
make[1]: *** [arch/arm/kernel/ptrace.o] Error 1
make: *** [arch/arm/kernel] Error 2

This part of the patch is:
Reported-by: Axel Lin <axel.lin@gmail.com>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
(They both provided patches to fix it)

This patch also (at the request of the list) fixes the fact that
ARM has both LE and BE versions however the audit code was called as if
it was always BE.  If audit userspace were to try to interpret the bits
it got from a LE system it would obviously do so incorrectly.  Fix this
by using the right arch flag on the right system.

This part of the patch is:
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/ptrace.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e33870ff0ac0..ede6443c34d9 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))

From 15103aa7a033d7d671c75cc3a71d772dbcbae61e Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Mon, 20 Feb 2012 17:28:13 +0000
Subject: [PATCH 131/202] zaurus: Add ID for C-750/C-760/C-860/SL-C3000 PDA in
 MDLM mode

In 16adf5d07987d93675945f3cecf0e33706566005 I removed an over-broad
alias that caused zaurus.ko to bind to unrelated devices.
I had a report that at least one valid case no longer auto-loads because of this.
This patch adds an ID for that case.

Reported-by: Raphael Wimmer <raphael.wimmer@ur.de>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/zaurus.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index f701d4127087..ed2caed086f5 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -315,6 +315,11 @@ static const struct usb_device_id	products [] = {
 	.idProduct              = 0x9031,	/* C-750 C-760 */
 	ZAURUS_MASTER_INTERFACE,
 	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	/* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
 }, {
 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 		 | USB_DEVICE_ID_MATCH_DEVICE,

From 730c41d5ba583a9608300fc4e6cf236957cfe02a Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Tue, 21 Feb 2012 03:39:32 +0000
Subject: [PATCH 132/202] mlx4: Replacing pool_lock with mutex

Under the spinlock we call request_irq(), which allocates memory with GFP_KERNEL,
This causes the following trace when DEBUG_SPINLOCK is enabled, it can cause
the following trace:

 BUG: spinlock wrong CPU on CPU#2, ethtool/2595
 lock: ffff8801f9cbc2b0, .magic: dead4ead, .owner: ethtool/2595, .owner_cpu: 0
 Pid: 2595, comm: ethtool Not tainted 3.0.18 #2
 Call Trace:
 spin_bug+0xa2/0xf0
 do_raw_spin_unlock+0x71/0xa0
 _raw_spin_unlock+0xe/0x10
 mlx4_assign_eq+0x12b/0x190 [mlx4_core]
 mlx4_en_activate_cq+0x252/0x2d0 [mlx4_en]
 ? mlx4_en_activate_rx_rings+0x227/0x370 [mlx4_en]
 mlx4_en_start_port+0x189/0xb90 [mlx4_en]
 mlx4_en_set_ringparam+0x29a/0x340 [mlx4_en]
 dev_ethtool+0x816/0xb10
 ? dev_get_by_name_rcu+0xa4/0xe0
 dev_ioctl+0x2b5/0x470
 handle_mm_fault+0x1cd/0x2d0
 sock_do_ioctl+0x5d/0x70
 sock_ioctl+0x79/0x2f0
 do_vfs_ioctl+0x8c/0x340
 sys_ioctl+0xa1/0xb0
 system_call_fastpath+0x16/0x1b

Replacing with mutex, which is enough in this case.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/eq.c   | 8 ++++----
 drivers/net/ethernet/mellanox/mlx4/main.c | 2 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4.h | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 8fa41f3082cf..9129ace02560 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int vec = 0, err = 0, i;
 
-	spin_lock(&priv->msix_ctl.pool_lock);
+	mutex_lock(&priv->msix_ctl.pool_lock);
 	for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
 		if (~priv->msix_ctl.pool_bm & 1ULL << i) {
 			priv->msix_ctl.pool_bm |= 1ULL << i;
@@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 			eq_set_ci(&priv->eq_table.eq[vec], 1);
 		}
 	}
-	spin_unlock(&priv->msix_ctl.pool_lock);
+	mutex_unlock(&priv->msix_ctl.pool_lock);
 
 	if (vec) {
 		*vector = vec;
@@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec)
 	if (likely(i >= 0)) {
 		/*sanity check , making sure were not trying to free irq's
 		  Belonging to a legacy EQ*/
-		spin_lock(&priv->msix_ctl.pool_lock);
+		mutex_lock(&priv->msix_ctl.pool_lock);
 		if (priv->msix_ctl.pool_bm & 1ULL << i) {
 			free_irq(priv->eq_table.eq[vec].irq,
 				 &priv->eq_table.eq[vec]);
 			priv->msix_ctl.pool_bm &= ~(1ULL << i);
 		}
-		spin_unlock(&priv->msix_ctl.pool_lock);
+		mutex_unlock(&priv->msix_ctl.pool_lock);
 	}
 
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 9c5fbad513f8..5c655a2a3809 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1828,7 +1828,7 @@ slave_start:
 		goto err_master_mfunc;
 
 	priv->msix_ctl.pool_bm = 0;
-	spin_lock_init(&priv->msix_ctl.pool_lock);
+	mutex_init(&priv->msix_ctl.pool_lock);
 
 	mlx4_enable_msi_x(dev);
 	if ((mlx4_is_mfunc(dev)) &&
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index c92269f8c057..28f8251561f4 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -697,7 +697,7 @@ struct mlx4_sense {
 
 struct mlx4_msix_ctl {
 	u64		pool_bm;
-	spinlock_t	pool_lock;
+	struct mutex	pool_lock;
 };
 
 struct mlx4_steer {

From 3d8f93083be54696d3b7f8e8c6c70d411d01f9e8 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Tue, 21 Feb 2012 03:41:07 +0000
Subject: [PATCH 133/202] mlx4: Setting new port types after all interfaces
 unregistered

In port type change flow, need to set the new port types only after
all interfaces have finished the unregister process.
Otherwise, during unregister, one of the interfaces might issue a SET_PORT
command with wrong port types, it can cause bad FW behavior.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 5c655a2a3809..32f8799db190 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 	for (port = 0; port <  dev->caps.num_ports; port++) {
 		/* Change the port type only if the new type is different
 		 * from the current, and not set to Auto */
-		if (port_types[port] != dev->caps.port_type[port + 1]) {
+		if (port_types[port] != dev->caps.port_type[port + 1])
 			change = 1;
-			dev->caps.port_type[port + 1] = port_types[port];
-		}
 	}
 	if (change) {
 		mlx4_unregister_device(dev);
 		for (port = 1; port <= dev->caps.num_ports; port++) {
 			mlx4_CLOSE_PORT(dev, port);
+			dev->caps.port_type[port + 1] = port_types[port];
 			err = mlx4_SET_PORT(dev, port);
 			if (err) {
 				mlx4_err(dev, "Failed to set port %d, "

From 84338a6c9dbb6ff3de4749864020f8f25d86fc81 Mon Sep 17 00:00:00 2001
From: Michel Machado <michel@digirati.com.br>
Date: Tue, 21 Feb 2012 16:04:13 -0500
Subject: [PATCH 134/202] neighbour: Fixed race condition at tbl->nht

When the fixed race condition happens:

1. While function neigh_periodic_work scans the neighbor hash table
pointed by field tbl->nht, it unlocks and locks tbl->lock between
buckets in order to call cond_resched.

2. Assume that function neigh_periodic_work calls cond_resched, that is,
the lock tbl->lock is available, and function neigh_hash_grow runs.

3. Once function neigh_hash_grow finishes, and RCU calls
neigh_hash_free_rcu, the original struct neigh_hash_table that function
neigh_periodic_work was using doesn't exist anymore.

4. Once back at neigh_periodic_work, whenever the old struct
neigh_hash_table is accessed, things can go badly.

Signed-off-by: Michel Machado <michel@digirati.com.br>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/neighbour.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index e287346e0934..2a83914b0277 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -826,6 +826,8 @@ next_elt:
 		write_unlock_bh(&tbl->lock);
 		cond_resched();
 		write_lock_bh(&tbl->lock);
+		nht = rcu_dereference_protected(tbl->nht,
+						lockdep_is_held(&tbl->lock));
 	}
 	/* Cycle through all hash buckets every base_reachable_time/2 ticks.
 	 * ARP entry timeouts range from 1/2 base_reachable_time to 3/2

From 115c9b81928360d769a76c632bae62d15206a94a Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Tue, 21 Feb 2012 16:54:48 -0500
Subject: [PATCH 135/202] rtnetlink: Fix problem with buffer allocation

Implement a new netlink attribute type IFLA_EXT_MASK.  The mask
is a 32 bit value that can be used to indicate to the kernel that
certain extended ifinfo values are requested by the user application.
At this time the only mask value defined is RTEXT_FILTER_VF to
indicate that the user wants the ifinfo dump to send information
about the VFs belonging to the interface.

This patch fixes a bug in which certain applications do not have
large enough buffers to accommodate the extra information returned
by the kernel with large numbers of SR-IOV virtual functions.
Those applications will not send the new netlink attribute with
the interface info dump request netlink messages so they will
not get unexpectedly large request buffers returned by the kernel.

Modifies the rtnl_calcit function to traverse the list of net
devices and compute the minimum buffer size that can hold the
info dumps of all matching devices based upon the filter passed
in via the new netlink attribute filter mask.  If no filter
mask is sent then the buffer allocation defaults to NLMSG_GOODSIZE.

With this change it is possible to add yet to be defined netlink
attributes to the dump request which should make it fairly extensible
in the future.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/if_link.h   |  1 +
 include/linux/rtnetlink.h |  3 ++
 include/net/rtnetlink.h   |  2 +-
 net/core/rtnetlink.c      | 78 ++++++++++++++++++++++++++++-----------
 4 files changed, 62 insertions(+), 22 deletions(-)

diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index c52d4b5f872a..4b24ff453aee 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -137,6 +137,7 @@ enum {
 	IFLA_AF_SPEC,
 	IFLA_GROUP,		/* Group the device belongs to */
 	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
 	__IFLA_MAX
 };
 
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 8e872ead88b5..577592ea0ea0 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -602,6 +602,9 @@ struct tcamsg {
 #define TCA_ACT_TAB 1 /* attr type must be >=1 */	
 #define TCAA_MAX 1
 
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF		(1 << 0)
+
 /* End of information exported to user level */
 
 #ifdef __KERNEL__
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index 678f1ffaf843..370293901971 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -6,7 +6,7 @@
 
 typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *);
 typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *);
-typedef u16 (*rtnl_calcit_func)(struct sk_buff *);
+typedef u16 (*rtnl_calcit_func)(struct sk_buff *, struct nlmsghdr *);
 
 extern int	__rtnl_register(int protocol, int msgtype,
 				rtnl_doit_func, rtnl_dumpit_func,
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 65aebd450027..606a6e8f3671 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -60,7 +60,6 @@ struct rtnl_link {
 };
 
 static DEFINE_MUTEX(rtnl_mutex);
-static u16 min_ifinfo_dump_size;
 
 void rtnl_lock(void)
 {
@@ -724,10 +723,11 @@ static void copy_rtnl_link_stats64(void *v, const struct rtnl_link_stats64 *b)
 }
 
 /* All VF info */
-static inline int rtnl_vfinfo_size(const struct net_device *dev)
+static inline int rtnl_vfinfo_size(const struct net_device *dev,
+				   u32 ext_filter_mask)
 {
-	if (dev->dev.parent && dev_is_pci(dev->dev.parent)) {
-
+	if (dev->dev.parent && dev_is_pci(dev->dev.parent) &&
+	    (ext_filter_mask & RTEXT_FILTER_VF)) {
 		int num_vfs = dev_num_vf(dev->dev.parent);
 		size_t size = nla_total_size(sizeof(struct nlattr));
 		size += nla_total_size(num_vfs * sizeof(struct nlattr));
@@ -766,7 +766,8 @@ static size_t rtnl_port_size(const struct net_device *dev)
 		return port_self_size;
 }
 
-static noinline size_t if_nlmsg_size(const struct net_device *dev)
+static noinline size_t if_nlmsg_size(const struct net_device *dev,
+				     u32 ext_filter_mask)
 {
 	return NLMSG_ALIGN(sizeof(struct ifinfomsg))
 	       + nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
@@ -784,8 +785,9 @@ static noinline size_t if_nlmsg_size(const struct net_device *dev)
 	       + nla_total_size(4) /* IFLA_MASTER */
 	       + nla_total_size(1) /* IFLA_OPERSTATE */
 	       + nla_total_size(1) /* IFLA_LINKMODE */
-	       + nla_total_size(4) /* IFLA_NUM_VF */
-	       + rtnl_vfinfo_size(dev) /* IFLA_VFINFO_LIST */
+	       + nla_total_size(ext_filter_mask
+			        & RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */
+	       + rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */
 	       + rtnl_port_size(dev) /* IFLA_VF_PORTS + IFLA_PORT_SELF */
 	       + rtnl_link_get_size(dev) /* IFLA_LINKINFO */
 	       + rtnl_link_get_af_size(dev); /* IFLA_AF_SPEC */
@@ -868,7 +870,7 @@ static int rtnl_port_fill(struct sk_buff *skb, struct net_device *dev)
 
 static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			    int type, u32 pid, u32 seq, u32 change,
-			    unsigned int flags)
+			    unsigned int flags, u32 ext_filter_mask)
 {
 	struct ifinfomsg *ifm;
 	struct nlmsghdr *nlh;
@@ -941,10 +943,11 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 		goto nla_put_failure;
 	copy_rtnl_link_stats64(nla_data(attr), stats);
 
-	if (dev->dev.parent)
+	if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF))
 		NLA_PUT_U32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent));
 
-	if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent) {
+	if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent
+	    && (ext_filter_mask & RTEXT_FILTER_VF)) {
 		int i;
 
 		struct nlattr *vfinfo, *vf;
@@ -1048,6 +1051,8 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 	struct net_device *dev;
 	struct hlist_head *head;
 	struct hlist_node *node;
+	struct nlattr *tb[IFLA_MAX+1];
+	u32 ext_filter_mask = 0;
 
 	s_h = cb->args[0];
 	s_idx = cb->args[1];
@@ -1055,6 +1060,12 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 	rcu_read_lock();
 	cb->seq = net->dev_base_seq;
 
+	nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+		    ifla_policy);
+
+	if (tb[IFLA_EXT_MASK])
+		ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
 	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
 		idx = 0;
 		head = &net->dev_index_head[h];
@@ -1064,7 +1075,8 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 			if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
 					     NETLINK_CB(cb->skb).pid,
 					     cb->nlh->nlmsg_seq, 0,
-					     NLM_F_MULTI) <= 0)
+					     NLM_F_MULTI,
+					     ext_filter_mask) <= 0)
 				goto out;
 
 			nl_dump_check_consistent(cb, nlmsg_hdr(skb));
@@ -1100,6 +1112,7 @@ const struct nla_policy ifla_policy[IFLA_MAX+1] = {
 	[IFLA_VF_PORTS]		= { .type = NLA_NESTED },
 	[IFLA_PORT_SELF]	= { .type = NLA_NESTED },
 	[IFLA_AF_SPEC]		= { .type = NLA_NESTED },
+	[IFLA_EXT_MASK]		= { .type = NLA_U32 },
 };
 EXPORT_SYMBOL(ifla_policy);
 
@@ -1509,8 +1522,6 @@ errout:
 
 	if (send_addr_notify)
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
-	min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev),
-				     min_ifinfo_dump_size);
 
 	return err;
 }
@@ -1842,6 +1853,7 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	struct net_device *dev = NULL;
 	struct sk_buff *nskb;
 	int err;
+	u32 ext_filter_mask = 0;
 
 	err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
 	if (err < 0)
@@ -1850,6 +1862,9 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	if (tb[IFLA_IFNAME])
 		nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
 
+	if (tb[IFLA_EXT_MASK])
+		ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
 	ifm = nlmsg_data(nlh);
 	if (ifm->ifi_index > 0)
 		dev = __dev_get_by_index(net, ifm->ifi_index);
@@ -1861,12 +1876,12 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	if (dev == NULL)
 		return -ENODEV;
 
-	nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
+	nskb = nlmsg_new(if_nlmsg_size(dev, ext_filter_mask), GFP_KERNEL);
 	if (nskb == NULL)
 		return -ENOBUFS;
 
 	err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid,
-			       nlh->nlmsg_seq, 0, 0);
+			       nlh->nlmsg_seq, 0, 0, ext_filter_mask);
 	if (err < 0) {
 		/* -EMSGSIZE implies BUG in if_nlmsg_size */
 		WARN_ON(err == -EMSGSIZE);
@@ -1877,8 +1892,31 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	return err;
 }
 
-static u16 rtnl_calcit(struct sk_buff *skb)
+static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
 {
+	struct net *net = sock_net(skb->sk);
+	struct net_device *dev;
+	struct nlattr *tb[IFLA_MAX+1];
+	u32 ext_filter_mask = 0;
+	u16 min_ifinfo_dump_size = 0;
+
+	nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy);
+
+	if (tb[IFLA_EXT_MASK])
+		ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
+	if (!ext_filter_mask)
+		return NLMSG_GOODSIZE;
+	/*
+	 * traverse the list of net devices and compute the minimum
+	 * buffer size based upon the filter mask.
+	 */
+	list_for_each_entry(dev, &net->dev_base_head, dev_list) {
+		min_ifinfo_dump_size = max_t(u16, min_ifinfo_dump_size,
+					     if_nlmsg_size(dev,
+						           ext_filter_mask));
+	}
+
 	return min_ifinfo_dump_size;
 }
 
@@ -1913,13 +1951,11 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change)
 	int err = -ENOBUFS;
 	size_t if_info_size;
 
-	skb = nlmsg_new((if_info_size = if_nlmsg_size(dev)), GFP_KERNEL);
+	skb = nlmsg_new((if_info_size = if_nlmsg_size(dev, 0)), GFP_KERNEL);
 	if (skb == NULL)
 		goto errout;
 
-	min_ifinfo_dump_size = max_t(u16, if_info_size, min_ifinfo_dump_size);
-
-	err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0);
+	err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0, 0);
 	if (err < 0) {
 		/* -EMSGSIZE implies BUG in if_nlmsg_size() */
 		WARN_ON(err == -EMSGSIZE);
@@ -1977,7 +2013,7 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 			return -EOPNOTSUPP;
 		calcit = rtnl_get_calcit(family, type);
 		if (calcit)
-			min_dump_alloc = calcit(skb);
+			min_dump_alloc = calcit(skb, nlh);
 
 		__rtnl_unlock();
 		rtnl = net->rtnl;

From b63d97a36edb1aecf8c13e5f5783feff4d64c24b Mon Sep 17 00:00:00 2001
From: Chris D Schimp <silverchris@gmail.com>
Date: Mon, 20 Feb 2012 16:59:24 -0500
Subject: [PATCH 136/202] hwmon: (max6639) Fix FAN_FROM_REG calculation

RPM calculation from tachometer value does not depend on PPR.
Also, do not report negative RPM values.

Signed-off-by: Chris D Schimp <silverchris@gmail.com>
[guenter.roeck@ericsson.com: do not report negative RPM values]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Roland Stigge <stigge@antcom.de>
---
 drivers/hwmon/max6639.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index e10a092c603c..13e58a1992cf 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -72,8 +72,8 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
 
 static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
 
-#define FAN_FROM_REG(val, div, rpm_range)	((val) == 0 ? -1 : \
-	(val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range)	((val) == 0 || (val) == 255 ? \
+				0 : (rpm_ranges[rpm_range] * 30) / (val))
 #define TEMP_LIMIT_TO_REG(val)	SENSORS_LIMIT((val) / 1000, 0, 255)
 
 /*
@@ -333,7 +333,7 @@ static ssize_t show_fan_input(struct device *dev,
 		return PTR_ERR(data);
 
 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
-		       data->ppr, data->rpm_range));
+		       data->rpm_range));
 }
 
 static ssize_t show_alarm(struct device *dev,

From 2f2da1ac0ba5b6cc6e1957c4da5ff20e67d8442b Mon Sep 17 00:00:00 2001
From: Chris D Schimp <silverchris@gmail.com>
Date: Mon, 20 Feb 2012 17:44:59 -0500
Subject: [PATCH 137/202] hwmon: (max6639) Fix PPR register initialization to
 set both channels

Initialize PPR register for both channels, and set correct PPR register bits.
Also remove unnecessary variable initializations.

Signed-off-by: Chris D Schimp <silverchris@gmail.com>
[guenter.roeck@ericsson.com: Merged two patches into one]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Roland Stigge <stigge@antcom.de>
---
 drivers/hwmon/max6639.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index 13e58a1992cf..a6760bacd915 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -429,9 +429,9 @@ static int max6639_init_client(struct i2c_client *client)
 	struct max6639_data *data = i2c_get_clientdata(client);
 	struct max6639_platform_data *max6639_info =
 		client->dev.platform_data;
-	int i = 0;
+	int i;
 	int rpm_range = 1; /* default: 4000 RPM */
-	int err = 0;
+	int err;
 
 	/* Reset chip to default values, see below for GCONFIG setup */
 	err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
@@ -446,11 +446,6 @@ static int max6639_init_client(struct i2c_client *client)
 	else
 		data->ppr = 2;
 	data->ppr -= 1;
-	err = i2c_smbus_write_byte_data(client,
-			MAX6639_REG_FAN_PPR(i),
-			data->ppr << 5);
-	if (err)
-		goto exit;
 
 	if (max6639_info)
 		rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
@@ -458,6 +453,13 @@ static int max6639_init_client(struct i2c_client *client)
 
 	for (i = 0; i < 2; i++) {
 
+		/* Set Fan pulse per revolution */
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_FAN_PPR(i),
+				data->ppr << 6);
+		if (err)
+			goto exit;
+
 		/* Fans config PWM, RPM */
 		err = i2c_smbus_write_byte_data(client,
 			MAX6639_REG_FAN_CONFIG1(i),

From a5e7424d424f6398a198ead79d99e0a3c2f24ce8 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 21 Feb 2012 17:59:19 -0500
Subject: [PATCH 138/202] ipv4: ping: Fix recvmsg MSG_OOB error handling.

Don't return an uninitialized variable as the error, return
-EOPNOTSUPP instead.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/ping.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index aea5a199c37a..b072386cee21 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -630,6 +630,7 @@ static int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 	pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
 
+	err = -EOPNOTSUPP;
 	if (flags & MSG_OOB)
 		goto out;
 

From cab928ee1f221c9cc48d6615070fefe2e444384a Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Tue, 7 Feb 2012 15:11:46 -0800
Subject: [PATCH 139/202] USB: Fix handoff when BIOS disables host PCI device.

On some systems with an Intel Panther Point xHCI host controller, the
BIOS disables the xHCI PCI device during boot, and switches the xHCI
ports over to EHCI.  This allows the BIOS to access USB devices without
having xHCI support.

The downside is that the xHCI BIOS handoff mechanism will fail because
memory mapped I/O is not enabled for the disabled PCI device.
Jesse Barnes says this is expected behavior.  The PCI core will enable
BARs before quirks run, but it will leave it in an undefined state, and
it may not have memory mapped I/O enabled.

Make the generic USB quirk handler call pci_enable_device() to re-enable
MMIO, and call pci_disable_device() once the host-specific BIOS handoff
is finished.  This will balance the ref counts in the PCI core.  When
the PCI probe function is called, usb_hcd_pci_probe() will call
pci_enable_device() again.

This should be back ported to kernels as old as 2.6.31.  That was the
first kernel with xHCI support, and no one has complained about BIOS
handoffs failing due to memory mapped I/O being disabled on other hosts
(EHCI, UHCI, or OHCI).

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
---
 drivers/usb/host/pci-quirks.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ac53a662a6a3..7732d69e49e0 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -872,7 +872,17 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 	 */
 	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
 		return;
+	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+		return;
 
+	if (pci_enable_device(pdev) < 0) {
+		dev_warn(&pdev->dev, "Can't enable PCI device, "
+				"BIOS handoff failed.\n");
+		return;
+	}
 	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
 		quirk_usb_handoff_uhci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
@@ -881,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 		quirk_usb_disable_ehci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
+	pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);

From a45aa3b30583e7d54e7cf4fbcd0aa699348a6e5c Mon Sep 17 00:00:00 2001
From: Elric Fu <elricfu1@gmail.com>
Date: Sat, 18 Feb 2012 13:32:27 +0800
Subject: [PATCH 140/202] USB: Set hub depth after USB3 hub reset

The superspeed device attached to a USB 3.0 hub(such as VIA's)
doesn't respond the address device command after resume. The
root cause is the superspeed hub will miss the Hub Depth value
that is used as an offset into the route string to locate the
bits it uses to determine the downstream port number after
reset, and all packets can't be routed to the device attached
to the superspeed hub.

Hub driver sends a Set Hub Depth request to the superspeed hub
except for USB 3.0 root hub when the hub is initialized and
doesn't send the request again after reset due to the resume
process. So moving the code that sends the Set Hub Depth request
to the superspeed hub from hub_configure() to hub_activate()
is to cover those situations include initialization and reset.

The patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
---
 drivers/usb/core/hub.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a0613d8f9be7..265c2f675d04 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	if (type == HUB_INIT3)
 		goto init3;
 
-	/* After a resume, port power should still be on.
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
 	 * For any other type of activation, turn it on.
 	 */
 	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
 
 		/* Speed up system boot by using a delayed_work for the
 		 * hub's initial power-up delays.  This is pretty awkward
@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
 		goto fail;
 	}
 
-	if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
-		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_SET_DEPTH, USB_RT_HUB,
-				hdev->level - 1, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-
-		if (ret < 0) {
-			message = "can't set hub depth";
-			goto fail;
-		}
-	}
-
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
 	 * but the hub can/will return fewer bytes here.

From 340a3504fd39dad753ba908fb6f894ee81fc3ae2 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Mon, 13 Feb 2012 14:42:11 -0800
Subject: [PATCH 141/202] xhci: Fix encoding for HS bulk/control NAK rate.

The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must
be encoded as an exponent of two number of microframes.  The endpoint
descriptor has the NAK rate encoded in number of microframes.  We were
just copying the value from the endpoint descriptor into the endpoint
context interval field, which was not correct.  This lead to the VIA
host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass
storage device.

The fix is to use the correct encoding.  Refactor the code to convert
number of frames to an exponential number of microframes, and make sure
we convert the number of microframes in HS bulk and control endpoints to
an exponent.

This should be back ported to kernels as old as 2.6.31, that contain the
commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math
in xhci_get_endpoint_interval"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Felipe Contreras <felipe.contreras@gmail.com>
Suggested-by: Andiry Xu <andiry.xu@amd.com>
Cc: stable@vger.kernel.org
---
 drivers/usb/host/xhci-mem.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 36cbe2226a44..383fc857491c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
 }
 
 /*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
  * microframes, rounded down to nearest power of 2.
  */
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
-		struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+		struct usb_host_endpoint *ep, unsigned int desc_interval,
+		unsigned int min_exponent, unsigned int max_exponent)
 {
 	unsigned int interval;
 
-	interval = fls(8 * ep->desc.bInterval) - 1;
-	interval = clamp_val(interval, 3, 10);
-	if ((1 << interval) != 8 * ep->desc.bInterval)
+	interval = fls(desc_interval) - 1;
+	interval = clamp_val(interval, min_exponent, max_exponent);
+	if ((1 << interval) != desc_interval)
 		dev_warn(&udev->dev,
 			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
 			 ep->desc.bEndpointAddress,
 			 1 << interval,
-			 8 * ep->desc.bInterval);
+			 desc_interval);
 
 	return interval;
 }
 
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval * 8, 3, 10);
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
 		    usb_endpoint_xfer_bulk(&ep->desc)) {
-			interval = ep->desc.bInterval;
+			interval = xhci_parse_microframe_interval(udev, ep);
 			break;
 		}
 		/* Fall through - SS and HS isoc/int have same decoding */

From bb94a406682770a35305daaa241ccdb7cab399de Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 21 Feb 2012 13:16:32 -0500
Subject: [PATCH 142/202] usb-storage: fix freezing of the scanning thread

This patch (as1521b) fixes the interaction between usb-storage's
scanning thread and the freezer.  The current implementation has a
race: If the device is unplugged shortly after being plugged in and
just as a system sleep begins, the scanning thread may get frozen
before the khubd task.  Khubd won't be able to freeze until the
disconnect processing is complete, and the disconnect processing can't
proceed until the scanning thread finishes, so the sleep transition
will fail.

The implementation in the 3.2 kernel suffers from an additional
problem.  There the scanning thread calls set_freezable_with_signal(),
and the signals sent by the freezer will mess up the thread's I/O
delays, which are all interruptible.

The solution to both problems is the same: Replace the kernel thread
used for scanning with a delayed-work routine on the system freezable
work queue.  Freezable work queues have the nice property that you can
cancel a work item even while the work queue is frozen, and no signals
are needed.

The 3.2 version of this patch solves the problem in Bugzilla #42730.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
CC: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/usb.c | 90 ++++++++++++++-------------------------
 drivers/usb/storage/usb.h |  7 +--
 2 files changed, 35 insertions(+), 62 deletions(-)

diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3dd7da9fd504..db51ba16dc07 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us)
 	struct Scsi_Host *host = us_to_host(us);
 
 	/* If the device is really gone, cut short reset delays */
-	if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
 		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+		wake_up(&us->delay_wait);
+	}
 
-	/* Prevent SCSI-scanning (if it hasn't started yet)
-	 * and wait for the SCSI-scanning thread to stop.
+	/* Prevent SCSI scanning (if it hasn't started yet)
+	 * or wait for the SCSI-scanning routine to stop.
 	 */
-	set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
-	wake_up(&us->delay_wait);
-	wait_for_completion(&us->scanning_done);
+	cancel_delayed_work_sync(&us->scan_dwork);
+
+	/* Balance autopm calls if scanning was cancelled */
+	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+		usb_autopm_put_interface_no_suspend(us->pusb_intf);
 
 	/* Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
@@ -823,53 +827,28 @@ static void release_everything(struct us_data *us)
 	scsi_host_put(us_to_host(us));
 }
 
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
 {
-	struct us_data *us = (struct us_data *)__us;
+	struct us_data *us = container_of(work, struct us_data,
+			scan_dwork.work);
 	struct device *dev = &us->pusb_intf->dev;
 
-	dev_dbg(dev, "device found\n");
+	dev_dbg(dev, "starting scan\n");
 
-	set_freezable();
-
-	/*
-	 * Wait for the timeout to expire or for a disconnect
-	 *
-	 * We can't freeze in this thread or we risk causing khubd to
-	 * fail to freeze, but we can't be non-freezable either. Nor can
-	 * khubd freeze while waiting for scanning to complete as it may
-	 * hold the device lock, causing a hang when suspending devices.
-	 * So instead of using wait_event_freezable(), explicitly test
-	 * for (DONT_SCAN || freezing) in interruptible wait and proceed
-	 * if any of DONT_SCAN, freezing or timeout has happened.
-	 */
-	if (delay_use > 0) {
-		dev_dbg(dev, "waiting for device to settle "
-				"before scanning\n");
-		wait_event_interruptible_timeout(us->delay_wait,
-				test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
-				freezing(current), delay_use * HZ);
+	/* For bulk-only devices, determine the max LUN value */
+	if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+		mutex_lock(&us->dev_mutex);
+		us->max_lun = usb_stor_Bulk_max_lun(us);
+		mutex_unlock(&us->dev_mutex);
 	}
+	scsi_scan_host(us_to_host(us));
+	dev_dbg(dev, "scan complete\n");
 
-	/* If the device is still connected, perform the scanning */
-	if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
-		/* For bulk-only devices, determine the max LUN value */
-		if (us->protocol == USB_PR_BULK &&
-				!(us->fflags & US_FL_SINGLE_LUN)) {
-			mutex_lock(&us->dev_mutex);
-			us->max_lun = usb_stor_Bulk_max_lun(us);
-			mutex_unlock(&us->dev_mutex);
-		}
-		scsi_scan_host(us_to_host(us));
-		dev_dbg(dev, "scan complete\n");
-
-		/* Should we unbind if no devices were detected? */
-	}
+	/* Should we unbind if no devices were detected? */
 
 	usb_autopm_put_interface(us->pusb_intf);
-	complete_and_exit(&us->scanning_done, 0);
+	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 }
 
 static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
@@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus,
 	init_completion(&us->cmnd_ready);
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);
-	init_completion(&us->scanning_done);
+	INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
 
 	/* Associate the us_data structure with the USB device */
 	result = associate_dev(us, intf);
@@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1);
 /* Second part of general USB mass-storage probing */
 int usb_stor_probe2(struct us_data *us)
 {
-	struct task_struct *th;
 	int result;
 	struct device *dev = &us->pusb_intf->dev;
 
@@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	}
 
-	/* Start up the thread for delayed SCSI-device scanning */
-	th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
-	if (IS_ERR(th)) {
-		dev_warn(dev,
-				"Unable to start the device-scanning thread\n");
-		complete(&us->scanning_done);
-		quiesce_and_remove_host(us);
-		result = PTR_ERR(th);
-		goto BadDevice;
-	}
-
+	/* Submit the delayed_work for SCSI-device scanning */
 	usb_autopm_get_interface_no_resume(us->pusb_intf);
-	wake_up_process(th);
+	set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 
+	if (delay_use > 0)
+		dev_dbg(dev, "waiting for device to settle before scanning\n");
+	queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+			delay_use * HZ);
 	return 0;
 
 	/* We come here if there are any problems */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 7b0f2113632e..75f70f04f37b 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -47,6 +47,7 @@
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 #include <scsi/scsi_host.h>
 
 struct us_data;
@@ -72,7 +73,7 @@ struct us_unusual_dev {
 #define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
-#define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
 #define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
 #define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
@@ -147,8 +148,8 @@ struct us_data {
 	/* mutual exclusion and synchronization structures */
 	struct completion	cmnd_ready;	 /* to sleep thread on	    */
 	struct completion	notify;		 /* thread begin/end	    */
-	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
-	struct completion	scanning_done;	 /* wait for scan thread    */
+	wait_queue_head_t	delay_wait;	 /* wait during reset	    */
+	struct delayed_work	scan_dwork;	 /* for async scanning      */
 
 	/* subdriver information */
 	void			*extra;		 /* Any extra data          */

From 7fd25702ba616d9ba56e2a625472f29e5aff25ee Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 20 Feb 2012 09:31:57 +0100
Subject: [PATCH 143/202] USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes
 Care cable id

This USB-serial cable with mini stereo jack enumerates as:
Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care

It is a TI3410 inside.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 6 ++++--
 drivers/usb/serial/ti_usb_3410_5052.h | 4 ++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8468eb769a29..75b838eff178 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 2aac1953993b..f140f1b9d5c0 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -49,6 +49,10 @@
 #define MTS_MT9234ZBA_PRODUCT_ID	0xF115
 #define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID		0x1a61
+#define ABBOTT_PRODUCT_ID		0x3410
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02

From c6c1e4491dc8d1ed2509fa6aacffa7f34614fc38 Mon Sep 17 00:00:00 2001
From: Bruno Thomsen <bruno.thomsen@gmail.com>
Date: Tue, 21 Feb 2012 23:41:37 +0100
Subject: [PATCH 144/202] USB: Added Kamstrup VID/PIDs to cp210x serial driver.

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8dbf51a43c45..08a5575724cd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -136,6 +136,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */

From 797a796a13df6b84a4791e57306737059b5b2384 Mon Sep 17 00:00:00 2001
From: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Date: Tue, 7 Feb 2012 11:45:33 +0900
Subject: [PATCH 145/202] asm-generic: architecture independent readq/writeq
 for 32bit environment

This provides unified readq()/writeq() helper functions for 32-bit
drivers.

For some cases, readq/writeq without atomicity is harmful, and order of
io access has to be specified explicitly.  So in this patch, new two
header files which contain non-atomic readq/writeq are added.

 - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/
   writeq with the order of lower address -> higher address

 - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/
   writeq with reversed order

This allows us to remove some readq()s that were added drivers when the
default non-atomic ones were removed in commit dbee8a0affd5 ("x86:
remove 32-bit versions of readq()/writeq()")

The drivers which need readq/writeq but can do with the non-atomic ones
must add the line:

  #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */

But this will be nop in 64-bit environments, and no other #ifdefs are
required.  So I believe that this patch can solve the problem of
 1. driver-specific readq/writeq
 2. atomicity and order of io access

This patch is tested with building allyesconfig and allmodconfig as
ARCH=x86 and ARCH=i386 on top of tip/master.

Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/nvme.c                        |  2 ++
 drivers/edac/i3200_edac.c                   | 15 ++---------
 drivers/platform/x86/ibm_rtl.c              | 15 ++---------
 drivers/platform/x86/intel_ips.c            | 15 ++---------
 drivers/scsi/qla4xxx/ql4_nx.c               | 23 ++---------------
 include/asm-generic/io-64-nonatomic-hi-lo.h | 28 +++++++++++++++++++++
 include/asm-generic/io-64-nonatomic-lo-hi.h | 28 +++++++++++++++++++++
 7 files changed, 66 insertions(+), 60 deletions(-)
 create mode 100644 include/asm-generic/io-64-nonatomic-hi-lo.h
 create mode 100644 include/asm-generic/io-64-nonatomic-lo-hi.h

diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c
index c1dc4d86c221..1f3c1a7d132a 100644
--- a/drivers/block/nvme.c
+++ b/drivers/block/nvme.c
@@ -41,6 +41,8 @@
 #include <linux/types.h>
 #include <linux/version.h>
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define NVME_Q_DEPTH 1024
 #define SQ_SIZE(depth)		(depth * sizeof(struct nvme_command))
 #define CQ_SIZE(depth)		(depth * sizeof(struct nvme_completion))
diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c
index aa08497a075a..73f55e2008c2 100644
--- a/drivers/edac/i3200_edac.c
+++ b/drivers/edac/i3200_edac.c
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include "edac_core.h"
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define I3200_REVISION        "1.1"
 
 #define EDAC_MOD_STR        "i3200_edac"
@@ -101,19 +103,6 @@ struct i3200_priv {
 
 static int nr_channels;
 
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
-	const volatile u32 __iomem *p = addr;
-	u32 low, high;
-
-	low = readl(p);
-	high = readl(p + 1);
-
-	return low + ((u64)high << 32);
-}
-#endif
-
 static int how_many_channels(struct pci_dev *pdev)
 {
 	unsigned char capid0_8b; /* 8th byte of CAPID0 */
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 42a7d603c870..7481146a5b47 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -33,6 +33,8 @@
 #include <linux/mutex.h>
 #include <asm/bios_ebda.h>
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -83,19 +85,6 @@ static void __iomem *rtl_cmd_addr;
 static u8 rtl_cmd_type;
 static u8 rtl_cmd_width;
 
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
-	const volatile u32 __iomem *p = addr;
-	u32 low, high;
-
-	low = readl(p);
-	high = readl(p + 1);
-
-	return low + ((u64)high << 32);
-}
-#endif
-
 static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len)
 {
 	if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO)
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 809a3ae943c6..88a98cff5a44 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -77,6 +77,8 @@
 #include <asm/processor.h>
 #include "intel_ips.h"
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
 
 /*
@@ -344,19 +346,6 @@ struct ips_driver {
 static bool
 ips_gpu_turbo_enabled(struct ips_driver *ips);
 
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
-	const volatile u32 __iomem *p = addr;
-	u32 low, high;
-
-	low = readl(p);
-	high = readl(p + 1);
-
-	return low + ((u64)high << 32);
-}
-#endif
-
 /**
  * ips_cpu_busy - is CPU busy?
  * @ips: IPS driver struct
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 78f1111158d7..65253dfbe962 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -10,6 +10,8 @@
 #include "ql4_def.h"
 #include "ql4_glbl.h"
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define MASK(n)		DMA_BIT_MASK(n)
 #define MN_WIN(addr)	(((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
 #define OCM_WIN(addr)	(((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
@@ -655,27 +657,6 @@ static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha,
 	return 0;
 }
 
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
-	const volatile u32 __iomem *p = addr;
-	u32 low, high;
-
-	low = readl(p);
-	high = readl(p + 1);
-
-	return low + ((u64)high << 32);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
-{
-	writel(val, addr);
-	writel(val >> 32, addr+4);
-}
-#endif
-
 static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha,
 		u64 off, void *data, int size)
 {
diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h
new file mode 100644
index 000000000000..a6806a94250d
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-hi-lo.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
+#define _ASM_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+	const volatile u32 __iomem *p = addr;
+	u32 low, high;
+
+	high = readl(p + 1);
+	low = readl(p);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+	writel(val >> 32, addr + 4);
+	writel(val, addr);
+}
+#endif
+
+#endif	/* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h
new file mode 100644
index 000000000000..ca546b1ff8b5
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-lo-hi.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
+#define _ASM_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+	const volatile u32 __iomem *p = addr;
+	u32 low, high;
+
+	low = readl(p);
+	high = readl(p + 1);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+	writel(val, addr);
+	writel(val >> 32, addr + 4);
+}
+#endif
+
+#endif	/* _ASM_IO_64_NONATOMIC_LO_HI_H_ */

From faf309009e2e18d30c032b7d9479f29b91677c37 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 21 Feb 2012 17:24:20 -0800
Subject: [PATCH 146/202] sys_poll: fix incorrect type for 'timeout' parameter

The 'poll()' system call timeout parameter is supposed to be 'int', not
'long'.

Now, the reason this matters is that right now 32-bit compat mode is
broken on at least x86-64, because the 32-bit code just calls
'sys_poll()' directly on x86-64, and the 32-bit argument will have been
zero-extended, turning a signed 'int' into a large unsigned 'long'
value.

We could just introduce a 'compat_sys_poll()' function for this, and
that may eventually be what we have to do, but since the actual standard
poll() semantics is *supposed* to be 'int', and since at least on x86-64
glibc sign-extends the argument before invocing the system call (so
nobody can actually use a 64-bit timeout value in user space _anyway_,
even in 64-bit binaries), the simpler solution would seem to be to just
fix the definition of the system call to match what it should have been
from the very start.

If it turns out that somebody somehow circumvents the user-level libc
64-bit sign extension and actually uses a large unsigned 64-bit timeout
despite that not being how poll() is supposed to work, we will need to
do the compat_sys_poll() approach.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/kernel/compat_wrapper.S | 2 +-
 fs/select.c                       | 2 +-
 include/linux/syscalls.h          | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 18c51df9fe06..ff605a39cf43 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper)
 ENTRY(sys32_poll_wrapper)
 	llgtr	%r2,%r2			# struct pollfd *
 	llgfr	%r3,%r3			# unsigned int
-	lgfr	%r4,%r4			# long
+	lgfr	%r4,%r4			# int
 	jg	sys_poll		# branch to system call
 
 ENTRY(sys32_setresgid16_wrapper)
diff --git a/fs/select.c b/fs/select.c
index d33418fdc858..e782258d0de3 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -912,7 +912,7 @@ static long do_restart_poll(struct restart_block *restart_block)
 }
 
 SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
-		long, timeout_msecs)
+		int, timeout_msecs)
 {
 	struct timespec end_time, *to = NULL;
 	int ret;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 515669fa3c1d..8ec1153ff57b 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -624,7 +624,7 @@ asmlinkage long sys_socketpair(int, int, int, int __user *);
 asmlinkage long sys_socketcall(int call, unsigned long __user *args);
 asmlinkage long sys_listen(int, int);
 asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
-				long timeout);
+				int timeout);
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
 asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);

From 9b45c0d2c50e19bd73d2f5e18dd6912a6991306e Mon Sep 17 00:00:00 2001
From: James Morris <james.l.morris@oracle.com>
Date: Wed, 22 Feb 2012 12:45:07 +1100
Subject: [PATCH 147/202] maintainers: update my email address

Update my email address.

Signed-off-by: James Morris <james.l.morris@oracle.com>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 9a648eb8e213..924fb0bb52e0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5861,7 +5861,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5874,7 +5874,7 @@ S:	Supported
 
 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org

From 07d2f1a54a78a648093f4f3a33aa86b03cf9e25f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 15 Feb 2012 17:51:26 +0000
Subject: [PATCH 148/202] powerpc: Remove references to cpu_*_map

This has been obsolescent for a while; time for the final push.

In adjacent context, replaced old cpus_* with cpumask_*.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/wsp/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
index 71bd105f3863..0ba103ae83a5 100644
--- a/arch/powerpc/platforms/wsp/smp.c
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr)
 
 static int __init smp_a2_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return num_possible_cpus();
 }
 
 static struct smp_ops_t a2_smp_ops = {

From 922b9f86a020258d3ea3bfed27251efaed7a03a3 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 20 Feb 2012 21:32:30 +0000
Subject: [PATCH 149/202] powerpc: Fix program check handling when lockdep is
 enabled

In commit 54321242afe ("Disable interrupts early in Program Check"), we
switched from enabling to disabling interrupts in program_check_common.

Whereas ENABLE_INTS leaves r3 untouched, if lockdep is enabled DISABLE_INTS
calls into lockdep code and will clobber r3. That means we pass a bogus
struct pt_regs* into program_check_exception() and all hell breaks loose.

So load our regs pointer into r3 after we call DISABLE_INTS.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3844ca7c5099..15c5a4f6de01 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -774,8 +774,8 @@ alignment_common:
 program_check_common:
 	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
 	DISABLE_INTS
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.program_check_exception
 	b	.ret_from_except
 

From aa491ad3d4bf3c7994a419b3bb1c91b9b4fd2a8a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 22 Feb 2012 16:04:24 +1100
Subject: [PATCH 150/202] cpuidle: Default y on powerpc pSeries

We moved all our pSeries idle loops to the cpu idle framework
so we really want it to come up by default.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/cpuidle/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 7dbc4a83c45c..78a666d1e5f5 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -1,7 +1,7 @@
 
 config CPU_IDLE
 	bool "CPU idle PM support"
-	default ACPI
+	default y if ACPI || PPC_PSERIES
 	help
 	  CPU idle is a generic framework for supporting software-controlled
 	  idle processor power management.  It includes modular cross-platform

From 18b246fa60dd4bfc71c78d669e2ffaa5df454d6a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 22 Feb 2012 16:48:32 +1100
Subject: [PATCH 151/202] powerpc: Fix various issues with return to userspace

We have a few problems when returning to userspace. This is a
quick set of fixes for 3.3, I'll look into a more comprehensive
rework for 3.4. This fixes:

 - We kept interrupts soft-disabled when schedule'ing or calling
do_signal when returning to userspace as a result of a hardware
interrupt.

 - Rename do_signal to do_notify_resume like all other archs (and
do_signal_pending back to do_signal, which it was before Roland
changed it).

 - Add the missing call to key_replace_session_keyring() to
do_notify_resume().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
---
 arch/powerpc/kernel/entry_32.S |  2 +-
 arch/powerpc/kernel/entry_64.S |  6 +++++-
 arch/powerpc/kernel/signal.c   | 12 ++++++++----
 arch/powerpc/kernel/signal.h   |  2 +-
 4 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4f80cf1ce77b..3e57a00b8cba 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1213,7 +1213,7 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	stw	r3,_TRAP(r1)
 2:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mr	r4,r9
-	bl	do_signal
+	bl	do_notify_resume
 	REST_NVGPRS(r1)
 	b	recheck
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d834425186ae..866462cbe2d8 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -751,12 +751,16 @@ user_work:
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	bl	.schedule
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_signal
+	bl	.do_notify_resume
 	b	.ret_from_except
 
 unrecov_restore:
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 2300426e531a..ac6e437b1021 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <linux/key.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
 {
+	sigset_t *oldset;
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
@@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 
 	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
-	else if (!oldset)
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal_pending(NULL, regs);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 6c0ddfc0603e..8dde973aaaf5 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,7 +12,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
 
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size, int is_32);

From 597cdbc2239e6019bbb2dd73b266f436166f0427 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue, 21 Feb 2012 10:46:49 +0000
Subject: [PATCH 152/202] atm: clip: remove clip_tbl

Commit 32092ecf0644 (atm: clip: Use device neigh support on top of
"arp_tbl".) introduced a bug since clip_tbl is zeroed : Crash occurs in
__neigh_for_each_release()

idle_timer_check() must use instead arp_tbl and neigh_check_cb() should
ignore non clip neighbours.

Idea from David Miller.

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/atm/clip.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/atm/clip.c b/net/atm/clip.c
index c12c2582457c..127fe70a1baa 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -46,8 +46,8 @@
 
 static struct net_device *clip_devs;
 static struct atm_vcc *atmarpd;
-static struct neigh_table clip_tbl;
 static struct timer_list idle_timer;
+static const struct neigh_ops clip_neigh_ops;
 
 static int to_atmarpd(enum atmarp_ctrl_type type, int itf, __be32 ip)
 {
@@ -123,6 +123,8 @@ static int neigh_check_cb(struct neighbour *n)
 	struct atmarp_entry *entry = neighbour_priv(n);
 	struct clip_vcc *cv;
 
+	if (n->ops != &clip_neigh_ops)
+		return 0;
 	for (cv = entry->vccs; cv; cv = cv->next) {
 		unsigned long exp = cv->last_use + cv->idle_timeout;
 
@@ -154,10 +156,10 @@ static int neigh_check_cb(struct neighbour *n)
 
 static void idle_timer_check(unsigned long dummy)
 {
-	write_lock(&clip_tbl.lock);
-	__neigh_for_each_release(&clip_tbl, neigh_check_cb);
+	write_lock(&arp_tbl.lock);
+	__neigh_for_each_release(&arp_tbl, neigh_check_cb);
 	mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ);
-	write_unlock(&clip_tbl.lock);
+	write_unlock(&arp_tbl.lock);
 }
 
 static int clip_arp_rcv(struct sk_buff *skb)

From cb74eb15ac88d6aacf7e58db1d8f8dadee710fd9 Mon Sep 17 00:00:00 2001
From: Mark Hills <mark@pogo.org.uk>
Date: Tue, 21 Feb 2012 21:26:31 +0000
Subject: [PATCH 153/202] ALSA: snd-usb-caiaq: Fix the return of XRUN

Commit 3702b08 added a lock, but did not account for the case of
SNDRV_PCM_POS_XRUN, which would get immediately overwritten.

This could be bundled into one if-else-if statement, but the goto
helps to clarify the 'exceptional' case.

Thanks to Andreas Pape for spotting this.

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/audio.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 2cf87f5afed4..fde9a7a29cb6 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -311,8 +311,10 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
 
 	spin_lock(&dev->spinlock);
 
-	if (dev->input_panic || dev->output_panic)
+	if (dev->input_panic || dev->output_panic) {
 		ptr = SNDRV_PCM_POS_XRUN;
+		goto unlock;
+	}
 
 	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		ptr = bytes_to_frames(sub->runtime,
@@ -321,6 +323,7 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
 		ptr = bytes_to_frames(sub->runtime,
 					dev->audio_in_buf_pos[index]);
 
+unlock:
 	spin_unlock(&dev->spinlock);
 	return ptr;
 }

From f0d14daa6906070ca044b86f483fdde7d81f5294 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michel=20D=C3=A4nzer?= <michel.daenzer@amd.com>
Date: Tue, 21 Feb 2012 17:39:15 +0100
Subject: [PATCH 154/202] drm/radeon: Only create additional ring debugfs files
 on Cayman or newer.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46274

Tested with a Cayman card in a Llano system: The additional files are created
and working for the Cayman card but not created for the CPU's built-in GPU.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_ring.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 30a4c5014c8b..92c9ea4751fb 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -500,8 +500,11 @@ static char radeon_debugfs_ib_names[RADEON_IB_POOL_SIZE][32];
 int radeon_debugfs_ring_init(struct radeon_device *rdev)
 {
 #if defined(CONFIG_DEBUG_FS)
-	return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
-					ARRAY_SIZE(radeon_debugfs_ring_info_list));
+	if (rdev->family >= CHIP_CAYMAN)
+		return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
+						ARRAY_SIZE(radeon_debugfs_ring_info_list));
+	else
+		return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1);
 #else
 	return 0;
 #endif

From 6b7746e8768e1c550b320d5af761f73e5aa37f76 Mon Sep 17 00:00:00 2001
From: Jerome Glisse <jglisse@redhat.com>
Date: Mon, 20 Feb 2012 17:57:20 -0500
Subject: [PATCH 155/202] drm/radeon/kms: properly set accel working flag and
 bailout when false

If accel is not working many subsystem such as the ib pool might not be
initialized properly that can lead to segfault inside kernel when cs
ioctl is call with non working acceleration. To avoid this make sure
the accel working flag is false when an error in GPU startup happen and
return EBUSY from cs ioctl if accel is not working.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 1 +
 drivers/gpu/drm/radeon/ni.c        | 1 +
 drivers/gpu/drm/radeon/r100.c      | 8 +++++++-
 drivers/gpu/drm/radeon/r300.c      | 8 +++++++-
 drivers/gpu/drm/radeon/r420.c      | 8 +++++++-
 drivers/gpu/drm/radeon/r520.c      | 8 +++++++-
 drivers/gpu/drm/radeon/r600.c      | 1 +
 drivers/gpu/drm/radeon/radeon_cs.c | 4 ++++
 drivers/gpu/drm/radeon/rs400.c     | 8 +++++++-
 drivers/gpu/drm/radeon/rs600.c     | 8 +++++++-
 drivers/gpu/drm/radeon/rs690.c     | 8 +++++++-
 drivers/gpu/drm/radeon/rv515.c     | 8 +++++++-
 drivers/gpu/drm/radeon/rv770.c     | 1 +
 13 files changed, 64 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 9be353b894cc..f58254a3fb01 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3223,6 +3223,7 @@ int evergreen_resume(struct radeon_device *rdev)
 	r = evergreen_startup(rdev);
 	if (r) {
 		DRM_ERROR("evergreen startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index db09065e68fd..2509c505acb8 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1547,6 +1547,7 @@ int cayman_resume(struct radeon_device *rdev)
 	r = cayman_startup(rdev);
 	if (r) {
 		DRM_ERROR("cayman startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 	return r;
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 18cd84fae99c..333cde9d4e7b 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3928,6 +3928,8 @@ static int r100_startup(struct radeon_device *rdev)
 
 int r100_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCI)
 		r100_pci_gart_disable(rdev);
@@ -3947,7 +3949,11 @@ int r100_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r100_startup(rdev);
+	r = r100_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r100_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 3fc0d29a5f39..6829638cca40 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1431,6 +1431,8 @@ static int r300_startup(struct radeon_device *rdev)
 
 int r300_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -1452,7 +1454,11 @@ int r300_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r300_startup(rdev);
+	r = r300_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r300_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 666e28fe509c..b14323053bad 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -291,6 +291,8 @@ static int r420_startup(struct radeon_device *rdev)
 
 int r420_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -316,7 +318,11 @@ int r420_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r420_startup(rdev);
+	r = r420_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r420_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 4ae1615e752f..25084e824dbc 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -218,6 +218,8 @@ static int r520_startup(struct radeon_device *rdev)
 
 int r520_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -237,7 +239,11 @@ int r520_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r520_startup(rdev);
+	r = r520_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r520_init(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 4f08e5e6ee9d..fbcd84803b60 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2529,6 +2529,7 @@ int r600_resume(struct radeon_device *rdev)
 	r = r600_startup(rdev);
 	if (r) {
 		DRM_ERROR("r600 startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 435a3d970ab8..e64bec488ed8 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -453,6 +453,10 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 	int r;
 
 	radeon_mutex_lock(&rdev->cs_mutex);
+	if (!rdev->accel_working) {
+		radeon_mutex_unlock(&rdev->cs_mutex);
+		return -EBUSY;
+	}
 	/* initialize parser */
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index b0ce84a20a68..866a05be75f2 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -442,6 +442,8 @@ static int rs400_startup(struct radeon_device *rdev)
 
 int rs400_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs400_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -462,7 +464,11 @@ int rs400_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs400_startup(rdev);
+	r = rs400_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs400_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index c05865e5521f..4fc700684dcd 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -876,6 +876,8 @@ static int rs600_startup(struct radeon_device *rdev)
 
 int rs600_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs600_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -894,7 +896,11 @@ int rs600_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs600_startup(rdev);
+	r = rs600_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs600_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 4f24a0fa8c82..f68dff2fadcb 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -659,6 +659,8 @@ static int rs690_startup(struct radeon_device *rdev)
 
 int rs690_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs400_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -677,7 +679,11 @@ int rs690_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs690_startup(rdev);
+	r = rs690_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs690_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 880637fd1946..959bf4483bea 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -424,6 +424,8 @@ static int rv515_startup(struct radeon_device *rdev)
 
 int rv515_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -443,7 +445,11 @@ int rv515_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rv515_startup(rdev);
+	r =  rv515_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rv515_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index a1668b659ddd..c049c0c51841 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1139,6 +1139,7 @@ int rv770_resume(struct radeon_device *rdev)
 	r = rv770_startup(rdev);
 	if (r) {
 		DRM_ERROR("r600 startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 

From 3ac0eb6d62fde0a60a6c5c61e562af1db8fbf712 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Sun, 19 Feb 2012 21:42:03 -0500
Subject: [PATCH 156/202] drm/radeon/kms/atom: dpms bios scratch reg updates

dpms bits not used on DCE4+

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_atombios.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 9e72daeeddc6..1f53ae74ada1 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -3020,6 +3020,9 @@ radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on)
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t bios_2_scratch;
 
+	if (ASIC_IS_DCE4(rdev))
+		return;
+
 	if (rdev->family >= CHIP_R600)
 		bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
 	else

From 3569e5374df66a42ab66368b8bbb075e81d4e85c Mon Sep 17 00:00:00 2001
From: "Moger, Babu" <Babu.Moger@netapp.com>
Date: Thu, 2 Feb 2012 15:21:54 +0000
Subject: [PATCH 157/202] [SCSI] scsi_dh_rdac: Fix for unbalanced reference
 count

This patch fixes an unbalanced refcount issue.

Elevating the lock for both kref_put and also for controller node deletion.
Previously, controller deletion was protected but the not the kref_put. This
was causing the other thread to pick up the controller structure which was
already kref'd zero.

This was causing the following WARN_ON and also sometimes panic.

WARNING: at lib/kref.c:43 kref_get+0x2d/0x30() (Not tainted)
Hardware name: IBM System x3655 -[7985AC1]-
Modules linked in: fuse scsi_dh_rdac autofs4 nfs lockd fscache nfs_acl
auth_rpcgss sunrpc 8021q garp stp llc ipv6 ib_srp(U) scsi_transport_srp
scsi_tgt ib_cm(U) ib_sa(U) ib_uverbs(U) ib_umad(U) mlx4_ib(U) mlx4_core(U)
ib_mthca(U) ib_mad(U) ib_core(U) dm_mirror dm_region_hash dm_log dm_round_robin
dm_multipath uinput bnx2 ses enclosure sg ibmpex ibmaem ipmi_msghandler
serio_raw k8temp hwmon amd64_edac_mod edac_core edac_mce_amd shpchp i2c_piix4
ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif sata_svw pata_acpi ata_generic
pata_serverworks aacraid radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core
dm_mod [last unloaded: freq_table]
Pid: 13735, comm: srp_daemon Not tainted 2.6.32-71.el6.x86_64 #1
Call Trace:
[<ffffffff8106b857>] warn_slowpath_common+0x87/0xc0
[<ffffffff8106b8aa>] warn_slowpath_null+0x1a/0x20
[<ffffffff8125c39d>] kref_get+0x2d/0x30
[<ffffffffa01b4029>] rdac_bus_attach+0x459/0x580 [scsi_dh_rdac]
[<ffffffff8135232a>] scsi_dh_handler_attach+0x2a/0x80
[<ffffffff81352c7b>] scsi_dh_notifier+0x9b/0xa0
[<ffffffff814cd7a5>] notifier_call_chain+0x55/0x80
[<ffffffff8109711a>] __blocking_notifier_call_chain+0x5a/0x80
[<ffffffff81097156>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff8132bec5>] device_add+0x515/0x640
[<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0
[<ffffffff8134f659>] scsi_sysfs_add_sdev+0x89/0x2c0
[<ffffffff8134d096>] scsi_probe_and_add_lun+0xea6/0xed0
[<ffffffff8134beb2>] ? scsi_alloc_target+0x292/0x2d0
[<ffffffff8134d1e1>] __scsi_scan_target+0x121/0x750
[<ffffffff811df806>] ? sysfs_create_file+0x26/0x30
[<ffffffff8132b759>] ? device_create_file+0x19/0x20
[<ffffffff81332838>] ? attribute_container_add_attrs+0x78/0x90
[<ffffffff814b008c>] ? klist_next+0x4c/0xf0
[<ffffffff81332e30>] ? transport_configure+0x0/0x20
[<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0
[<ffffffff8134df40>] scsi_scan_target+0xd0/0xe0
[<ffffffffa02f053a>] srp_create_target+0x75a/0x890 [ib_srp]
[<ffffffff8132a130>] dev_attr_store+0x20/0x30
[<ffffffff811df145>] sysfs_write_file+0xe5/0x170
[<ffffffff8116c818>] vfs_write+0xb8/0x1a0
[<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0
[<ffffffff8116d251>] sys_write+0x51/0x90
[<ffffffff81013172>] system_call_fastpath+0x16/0x1b

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 drivers/scsi/device_handler/scsi_dh_rdac.c | 25 ++++++++++++----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 53a31c753cb1..20c4557f5abd 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -364,10 +364,7 @@ static void release_controller(struct kref *kref)
 	struct rdac_controller *ctlr;
 	ctlr = container_of(kref, struct rdac_controller, kref);
 
-	flush_workqueue(kmpath_rdacd);
-	spin_lock(&list_lock);
 	list_del(&ctlr->node);
-	spin_unlock(&list_lock);
 	kfree(ctlr);
 }
 
@@ -376,20 +373,17 @@ static struct rdac_controller *get_controller(int index, char *array_name,
 {
 	struct rdac_controller *ctlr, *tmp;
 
-	spin_lock(&list_lock);
-
 	list_for_each_entry(tmp, &ctlr_list, node) {
 		if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
 			  (tmp->index == index) &&
 			  (tmp->host == sdev->host)) {
 			kref_get(&tmp->kref);
-			spin_unlock(&list_lock);
 			return tmp;
 		}
 	}
 	ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
 	if (!ctlr)
-		goto done;
+		return NULL;
 
 	/* initialize fields of controller */
 	memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
@@ -405,8 +399,7 @@ static struct rdac_controller *get_controller(int index, char *array_name,
 	INIT_WORK(&ctlr->ms_work, send_mode_select);
 	INIT_LIST_HEAD(&ctlr->ms_head);
 	list_add(&ctlr->node, &ctlr_list);
-done:
-	spin_unlock(&list_lock);
+
 	return ctlr;
 }
 
@@ -517,9 +510,12 @@ static int initialize_controller(struct scsi_device *sdev,
 			index = 0;
 		else
 			index = 1;
+
+		spin_lock(&list_lock);
 		h->ctlr = get_controller(index, array_name, array_id, sdev);
 		if (!h->ctlr)
 			err = SCSI_DH_RES_TEMP_UNAVAIL;
+		spin_unlock(&list_lock);
 	}
 	return err;
 }
@@ -906,7 +902,9 @@ static int rdac_bus_attach(struct scsi_device *sdev)
 	return 0;
 
 clean_ctlr:
+	spin_lock(&list_lock);
 	kref_put(&h->ctlr->kref, release_controller);
+	spin_unlock(&list_lock);
 
 failed:
 	kfree(scsi_dh_data);
@@ -921,14 +919,19 @@ static void rdac_bus_detach( struct scsi_device *sdev )
 	struct rdac_dh_data *h;
 	unsigned long flags;
 
-	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	scsi_dh_data = sdev->scsi_dh_data;
+	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	if (h->ctlr && h->ctlr->ms_queued)
+		flush_workqueue(kmpath_rdacd);
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	sdev->scsi_dh_data = NULL;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	spin_lock(&list_lock);
 	if (h->ctlr)
 		kref_put(&h->ctlr->kref, release_controller);
+	spin_unlock(&list_lock);
 	kfree(scsi_dh_data);
 	module_put(THIS_MODULE);
 	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);

From ba9adbe67e288823ac1deb7f11576ab5653f833e Mon Sep 17 00:00:00 2001
From: Guo-Fu Tseng <cooldavid@cooldavid.org>
Date: Wed, 22 Feb 2012 08:58:10 +0000
Subject: [PATCH 158/202] jme: Fix FIFO flush issue

Set the RX FIFO flush watermark lower.
According to Federico and JMicron's reply,
setting it to 16QW would be stable on most platforms.
Otherwise, user might experience packet drop issue.

CC: stable@kernel.org
Reported-by: Federico Quagliata <federico@quagliata.org>
Fixed-by: Federico Quagliata <federico@quagliata.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/jme.c | 10 +---------
 drivers/net/ethernet/jme.h |  2 +-
 2 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 27d651a80f3f..55cbf65512c3 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
 		((new_mtu) < IPV6_MIN_MTU))
 		return -EINVAL;
 
-	if (new_mtu > 4000) {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
-		jme_restart_rx_engine(jme);
-	} else {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
-		jme_restart_rx_engine(jme);
-	}
 
 	netdev->mtu = new_mtu;
 	netdev_update_features(netdev);
 
+	jme_restart_rx_engine(jme);
 	jme_reset_link(jme);
 
 	return 0;
diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h
index 4304072bd3c5..3efc897c9913 100644
--- a/drivers/net/ethernet/jme.h
+++ b/drivers/net/ethernet/jme.h
@@ -730,7 +730,7 @@ enum jme_rxcs_values {
 	RXCS_RETRYCNT_60	= 0x00000F00,
 
 	RXCS_DEFAULT		= RXCS_FIFOTHTP_128T |
-				  RXCS_FIFOTHNP_128QW |
+				  RXCS_FIFOTHNP_16QW |
 				  RXCS_DMAREQSZ_128B |
 				  RXCS_RETRYGAP_256ns |
 				  RXCS_RETRYCNT_32,

From 5095d64db1b978bdb31d30fed9e47dbf04f729be Mon Sep 17 00:00:00 2001
From: "RongQing.Li" <roy.qing.li@gmail.com>
Date: Tue, 21 Feb 2012 22:10:49 +0000
Subject: [PATCH 159/202] ipv6: ip6_route_output() never returns NULL.

ip6_route_output() never returns NULL, so it is wrong to
check if the return value is NULL.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6mr.c | 4 +++-
 net/ipv6/ndisc.c | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index c7e95c8c579f..5aa3981a3922 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1926,8 +1926,10 @@ static int ip6mr_forward2(struct net *net, struct mr6_table *mrt,
 	};
 
 	dst = ip6_route_output(net, NULL, &fl6);
-	if (!dst)
+	if (dst->error) {
+		dst_release(dst);
 		goto out_free;
+	}
 
 	skb_dst_drop(skb);
 	skb_dst_set(skb, dst);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index d8f02ef88e59..c964958ac470 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1545,9 +1545,10 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
 			 &saddr_buf, &ipv6_hdr(skb)->saddr, dev->ifindex);
 
 	dst = ip6_route_output(net, NULL, &fl6);
-	if (dst == NULL)
+	if (dst->error) {
+		dst_release(dst);
 		return;
-
+	}
 	dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
 	if (IS_ERR(dst))
 		return;

From 0541743b4b35f2ddc9e490b4e354930168b60d23 Mon Sep 17 00:00:00 2001
From: "RongQing.Li" <roy.qing.li@gmail.com>
Date: Tue, 21 Feb 2012 22:10:50 +0000
Subject: [PATCH 160/202] ethernet/broadcom: ip6_route_output() never returns
 NULL.

ip6_route_output() never returns NULL, so it is wrong to
check if the return value is NULL.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/cnic.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index dd3a0a232ea0..818a573669e6 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
 		fl6.flowi6_oif = dst_addr->sin6_scope_id;
 
 	*dst = ip6_route_output(&init_net, NULL, &fl6);
-	if (*dst)
+	if ((*dst)->error) {
+		dst_release(*dst);
+		*dst = NULL;
+		return -ENETUNREACH;
+	} else
 		return 0;
 #endif
 

From 5d38b1f8cf8798d4df7809b3f3e38fad4d923e85 Mon Sep 17 00:00:00 2001
From: "RongQing.Li" <roy.qing.li@gmail.com>
Date: Tue, 21 Feb 2012 22:10:51 +0000
Subject: [PATCH 161/202] netfilter: ip6_route_output() never returns NULL.

ip6_route_output() never returns NULL, so it is wrong to
check if the return value is NULL.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/xt_TEE.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c
index 3aae66facf9f..4d5057902839 100644
--- a/net/netfilter/xt_TEE.c
+++ b/net/netfilter/xt_TEE.c
@@ -152,9 +152,10 @@ tee_tg_route6(struct sk_buff *skb, const struct xt_tee_tginfo *info)
 	fl6.flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) |
 			   (iph->flow_lbl[1] << 8) | iph->flow_lbl[2];
 	dst = ip6_route_output(net, NULL, &fl6);
-	if (dst == NULL)
+	if (dst->error) {
+		dst_release(dst);
 		return false;
-
+	}
 	skb_dst_drop(skb);
 	skb_dst_set(skb, dst);
 	skb->dev      = dst->dev;

From 22ad7499bc9297e47c8779bf5523694f28338499 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 21 Feb 2012 21:30:25 +0000
Subject: [PATCH 162/202] hso: memsetting wrong data in hso_get_count()

The intent was to clear out the icount struct here, but we accidentally
clear stack memory instead.  It probably will lead to a NULL dereference
right away.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 304fe78ff60e..e1324b4a0f66 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1632,7 +1632,7 @@ static int hso_get_count(struct tty_struct *tty,
 	struct hso_serial *serial = get_serial_by_tty(tty);
 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
 
-	memset(&icount, 0, sizeof(struct serial_icounter_struct));
+	memset(icount, 0, sizeof(struct serial_icounter_struct));
 
 	if (!tiocmget)
 		 return -ENOENT;

From ee932bf9acb2e2c6a309e808000f24856330e3f9 Mon Sep 17 00:00:00 2001
From: Scott Talbert <talbert@techie.net>
Date: Tue, 21 Feb 2012 13:06:00 +0000
Subject: [PATCH 163/202] Move Logitech Harmony 900 from cdc_ether to zaurus

In the current kernel implementation, the Logitech Harmony 900 remote
control is matched to the cdc_ether driver through the generic
USB_CDC_SUBCLASS_MDLM entry.  However, this device appears to be of the
pseudo-MDLM (Belcarra) type, rather than the standard one.  This patch
blacklists the Harmony 900 from the cdc_ether driver and whitelists it for
the pseudo-MDLM driver in zaurus.

Signed-off-by: Scott Talbert <talbert@techie.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c | 7 +++++++
 drivers/net/usb/zaurus.c    | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 41a61efc331e..90a30026a931 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -573,6 +573,13 @@ static const struct usb_device_id	products [] = {
 	.driver_info = 0,
 },
 
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info		= 0,
+},
+
 /*
  * WHITELIST!!!
  *
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index ed2caed086f5..c3197ce0e2ad 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -354,6 +354,13 @@ static const struct usb_device_id	products [] = {
 	ZAURUS_MASTER_INTERFACE,
 	.driver_info = OLYMPUS_MXL_INFO,
 },
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
 	{ },		// END
 };
 MODULE_DEVICE_TABLE(usb, products);

From 22c8bff6facebd6f1514ee1e37a6ffc892de7815 Mon Sep 17 00:00:00 2001
From: Doug Ledford <dledford@redhat.com>
Date: Mon, 20 Feb 2012 12:19:03 -0500
Subject: [PATCH 164/202] mlx4_core: Exported functions can't be static

At least on powerpc, it breaks the build if exported functions are
static.  Fix some static exported functions introduced with the mlx4
SR-IOV support added in 3.3-rc1.

Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c |  2 +-
 drivers/net/ethernet/mellanox/mlx4/mr.c | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 8a21e10952ea..9ea7cabcaf3c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -685,7 +685,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
 	return err;
 }
 
-static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
+int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
 {
 	struct mlx4_cmd_mailbox *outbox = ptr;
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 8deeef98280c..25a80d71fb2a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -304,7 +304,7 @@ static int mlx4_HW2SW_MPT(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox
 			    MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
 }
 
-static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
+int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
 			  u32 *base_mridx)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
@@ -320,14 +320,14 @@ static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range);
 
-static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
+void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt);
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_release_range);
 
-static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
+int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
 			   u64 iova, u64 size, u32 access, int npages,
 			   int page_shift, struct mlx4_mr *mr)
 {
@@ -457,7 +457,7 @@ int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access,
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_alloc);
 
-static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
+void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
 {
 	int err;
 
@@ -852,7 +852,7 @@ err_free:
 }
 EXPORT_SYMBOL_GPL(mlx4_fmr_alloc);
 
-static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
+int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
 			    u32 pd, u32 access, int max_pages,
 			    int max_maps, u8 page_shift, struct mlx4_fmr *fmr)
 {
@@ -954,7 +954,7 @@ int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
 }
 EXPORT_SYMBOL_GPL(mlx4_fmr_free);
 
-static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
+int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
 {
 	if (fmr->maps)
 		return -EBUSY;

From 363434b5dc352464ac7601547891e5fc9105f124 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Wed, 22 Feb 2012 08:13:52 -0800
Subject: [PATCH 165/202] hwmon: (ads1015) Fix file leak in probe function

An error while creating sysfs attribute files in the driver's probe function
results in an error abort, but already created files are not removed. This patch
fixes the problem.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Cc: Dirk Eibach <eibach@gdsys.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/ads1015.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index eedca3cf9968..dd87ae96c262 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -271,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client,
 			continue;
 		err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
 		if (err)
-			goto exit_free;
+			goto exit_remove;
 	}
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
@@ -285,7 +285,6 @@ static int ads1015_probe(struct i2c_client *client,
 exit_remove:
 	for (k = 0; k < ADS1015_CHANNELS; ++k)
 		device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
 	kfree(data);
 exit:
 	return err;

From c1c1a3d012fe5e82a9a025fb4b5a4f8ee67a53f6 Mon Sep 17 00:00:00 2001
From: Nikolaus Schulz <schulz@macnetix.de>
Date: Wed, 22 Feb 2012 23:18:44 +0100
Subject: [PATCH 166/202] hwmon: (f75375s) Fix register write order when
 setting fans to full speed

By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
to full speed.  In the f75375s driver, this need be done by enabling
manual fan control, plus duty mode for the F875387 chip, and then setting
the maximum duty cycle.  Fix a bug where the two necessary register writes
were swapped, effectively discarding the setting to full-speed.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/f75375s.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index f609b5727ba9..6bab2001ef3b 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 			fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
 			fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
 			data->pwm[nr] = 255;
-			f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-					data->pwm[nr]);
 			break;
 		case 1: /* PWM */
 			fanmode  |= (1 << F75387_FAN_MANU_MODE(nr));
@@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 		case 0: /* full speed */
 			fanmode  |= (3 << FAN_CTRL_MODE(nr));
 			data->pwm[nr] = 255;
-			f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-					data->pwm[nr]);
 			break;
 		case 1: /* PWM */
 			fanmode  |= (3 << FAN_CTRL_MODE(nr));
@@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 
 	f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
 	data->pwm_enable[nr] = val;
+	if (val == 0)
+		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+				data->pwm[nr]);
 	return 0;
 }
 

From fe66a05a06795bd3b788404d69ea7709f46a1609 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Feb 2012 08:40:56 -0500
Subject: [PATCH 167/202] Btrfs: improve error handling for
 btrfs_insert_dir_item callers

This allows us to gracefully continue if we aren't able to insert
directory items, both for normal files/dirs and snapshots.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c       | 20 +++++++++++++++++++-
 fs/btrfs/transaction.c | 13 +++++++------
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 6e0ee9b0d742..cbeb2e36cebc 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4585,7 +4585,8 @@ int btrfs_add_link(struct btrfs_trans_handle *trans,
 		ret = btrfs_insert_dir_item(trans, root, name, name_len,
 					    parent_inode, &key,
 					    btrfs_inode_type(inode), index);
-		BUG_ON(ret);
+		if (ret)
+			goto fail_dir_item;
 
 		btrfs_i_size_write(parent_inode, parent_inode->i_size +
 				   name_len * 2);
@@ -4593,6 +4594,23 @@ int btrfs_add_link(struct btrfs_trans_handle *trans,
 		ret = btrfs_update_inode(trans, root, parent_inode);
 	}
 	return ret;
+
+fail_dir_item:
+	if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) {
+		u64 local_index;
+		int err;
+		err = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+				 key.objectid, root->root_key.objectid,
+				 parent_ino, &local_index, name, name_len);
+
+	} else if (add_backref) {
+		u64 local_index;
+		int err;
+
+		err = btrfs_del_inode_ref(trans, root, name, name_len,
+					  ino, parent_ino, &local_index);
+	}
+	return ret;
 }
 
 static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 287a6728b1ad..016977beee5c 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -915,7 +915,11 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 				dentry->d_name.name, dentry->d_name.len,
 				parent_inode, &key,
 				BTRFS_FT_DIR, index);
-	BUG_ON(ret);
+	if (ret) {
+		pending->error = -EEXIST;
+		dput(parent);
+		goto fail;
+	}
 
 	btrfs_i_size_write(parent_inode, parent_inode->i_size +
 					 dentry->d_name.len * 2);
@@ -993,12 +997,9 @@ static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_pending_snapshot *pending;
 	struct list_head *head = &trans->transaction->pending_snapshots;
-	int ret;
 
-	list_for_each_entry(pending, head, list) {
-		ret = create_pending_snapshot(trans, fs_info, pending);
-		BUG_ON(ret);
-	}
+	list_for_each_entry(pending, head, list)
+		create_pending_snapshot(trans, fs_info, pending);
 	return 0;
 }
 

From a6b0d5c8dbfd428717fc4db4c36757783f391c7b Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Feb 2012 20:53:43 -0500
Subject: [PATCH 168/202] Btrfs: make sure we update latest_bdev

When we are setting up the mount, we close all the
devices that were not actually part of the metadata we found.

But, we don't make sure that one of those devices wasn't
fs_devices->latest_bdev, which means we can do a use after free
on the one we closed.

This updates latest_bdev as it goes.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c |  6 ++++++
 fs/btrfs/volumes.c | 17 ++++++++++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 58d0678dfcba..b801d29f3f10 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2305,6 +2305,12 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 
 	btrfs_close_extra_devices(fs_devices);
 
+	if (!fs_devices->latest_bdev) {
+		printk(KERN_CRIT "btrfs: failed to read devices on %s\n",
+		       sb->s_id);
+		goto fail_tree_roots;
+	}
+
 retry_root_backup:
 	blocksize = btrfs_level_size(tree_root,
 				     btrfs_super_root_level(disk_super));
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index cd040bf3fd87..7eefdef8a14c 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -459,12 +459,23 @@ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices)
 {
 	struct btrfs_device *device, *next;
 
+	struct block_device *latest_bdev = NULL;
+	u64 latest_devid = 0;
+	u64 latest_transid = 0;
+
 	mutex_lock(&uuid_mutex);
 again:
 	/* This is the initialized path, it is safe to release the devices. */
 	list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
-		if (device->in_fs_metadata)
+		if (device->in_fs_metadata) {
+			if (!latest_transid ||
+			    device->generation > latest_transid) {
+				latest_devid = device->devid;
+				latest_transid = device->generation;
+				latest_bdev = device->bdev;
+			}
 			continue;
+		}
 
 		if (device->bdev) {
 			blkdev_put(device->bdev, device->mode);
@@ -487,6 +498,10 @@ again:
 		goto again;
 	}
 
+	fs_devices->latest_bdev = latest_bdev;
+	fs_devices->latest_devid = latest_devid;
+	fs_devices->latest_trans = latest_transid;
+
 	mutex_unlock(&uuid_mutex);
 	return 0;
 }

From 16780cabb877dbd0c8c5e9ff9bdebd6c5bdd1a7b Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Feb 2012 22:14:55 -0500
Subject: [PATCH 169/202] Btrfs: add extra sanity checks on the path names in
 btrfs_mksubvol

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ioctl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index e9bdb8b783e5..05446f77f99b 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1333,6 +1333,12 @@ static noinline int btrfs_ioctl_snap_create_transid(struct file *file,
 		goto out;
 	}
 
+	if (name[0] == '.' &&
+	   (namelen == 1 || (name[1] == '.' && namelen == 2))) {
+		ret = -EEXIST;
+		goto out;
+	}
+
 	if (subvol) {
 		ret = btrfs_mksubvol(&file->f_path, name, namelen,
 				     NULL, transid, readonly);

From 506531905296d6aee84480c879b25ea98c3f9db6 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Wed, 22 Feb 2012 12:36:24 -0500
Subject: [PATCH 170/202] Btrfs: clear the extent uptodate bits during parent
 transid failures

If btrfs reads a block and finds a parent transid mismatch, it clears
the uptodate flags on the extent buffer, and the pages inside it.  But
we only clear the uptodate bits in the state tree if the block straddles
more than one page.

This is from an old optimization from to reduce contention on the extent
state tree.  But it is buggy because the code that retries a read from
a different copy of the block is going to find the uptodate state bits
set and skip the IO.

The end result of the bug is that we'll never actually read the good
copy (if there is one).

The fix here is to always clear the uptodate state bits, which is safe
because this code is only called when the parent transid fails.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_io.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 45ca8f9b0d61..a55fbe6252de 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3871,10 +3871,9 @@ int clear_extent_buffer_uptodate(struct extent_io_tree *tree,
 	num_pages = num_extent_pages(eb->start, eb->len);
 	clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
 
-	if (eb_straddles_pages(eb)) {
-		clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
-				      cached_state, GFP_NOFS);
-	}
+	clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
+			      cached_state, GFP_NOFS);
+
 	for (i = 0; i < num_pages; i++) {
 		page = extent_buffer_page(eb, i);
 		if (page)

From 5500cdbe14d7435e04f66ff3cfb8ecd8b8e44ebf Mon Sep 17 00:00:00 2001
From: Liu Bo <liubo2009@cn.fujitsu.com>
Date: Thu, 23 Feb 2012 10:49:04 -0500
Subject: [PATCH 171/202] Btrfs: increase the global block reserve estimates

When doing IO with large amounts of data fragmentation, the global block
reserve calulations are too low.  This increases them to avoid
ENOSPC crashes.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent-tree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index dc083f55bcfd..079e5a1c343c 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4108,7 +4108,7 @@ static u64 calc_global_metadata_size(struct btrfs_fs_info *fs_info)
 	num_bytes += div64_u64(data_used + meta_used, 50);
 
 	if (num_bytes * 3 > meta_used)
-		num_bytes = div64_u64(meta_used, 3);
+		num_bytes = div64_u64(meta_used, 3) * 2;
 
 	return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10);
 }

From 03606895cd98c0a628b17324fd7b5ff15db7e3cd Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 23 Feb 2012 10:55:02 +0000
Subject: [PATCH 172/202] ipsec: be careful of non existing mac headers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Niccolo Belli reported ipsec crashes in case we handle a frame without
mac header (atm in his case)

Before copying mac header, better make sure it is present.

Bugzilla reference:  https://bugzilla.kernel.org/show_bug.cgi?id=42809

Reported-by: Niccolò Belli <darkbasic@linuxsystems.it>
Tested-by: Niccolò Belli <darkbasic@linuxsystems.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/skbuff.h       | 10 ++++++++++
 net/ipv4/xfrm4_mode_beet.c   |  5 +----
 net/ipv4/xfrm4_mode_tunnel.c |  6 ++----
 net/ipv6/xfrm6_mode_beet.c   |  6 +-----
 net/ipv6/xfrm6_mode_tunnel.c |  6 ++----
 5 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 50db9b04a552..ae86adee3746 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1465,6 +1465,16 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
 }
 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
 
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+	if (skb_mac_header_was_set(skb)) {
+		const unsigned char *old_mac = skb_mac_header(skb);
+
+		skb_set_mac_header(skb, -skb->mac_len);
+		memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	}
+}
+
 static inline int skb_checksum_start_offset(const struct sk_buff *skb)
 {
 	return skb->csum_start - skb_headroom(skb);
diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c
index 63418185f524..e3db3f915114 100644
--- a/net/ipv4/xfrm4_mode_beet.c
+++ b/net/ipv4/xfrm4_mode_beet.c
@@ -110,10 +110,7 @@ static int xfrm4_beet_input(struct xfrm_state *x, struct sk_buff *skb)
 
 	skb_push(skb, sizeof(*iph));
 	skb_reset_network_header(skb);
-
-	memmove(skb->data - skb->mac_len, skb_mac_header(skb),
-		skb->mac_len);
-	skb_set_mac_header(skb, -skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm4_beet_make_header(skb);
 
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 534972e114ac..ed4bf11ef9f4 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -66,7 +66,6 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 
 static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
-	const unsigned char *old_mac;
 	int err = -EINVAL;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP)
@@ -84,10 +83,9 @@ static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index a81ce9450750..9949a356d62c 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -80,7 +80,6 @@ static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *ip6h;
-	const unsigned char *old_mac;
 	int size = sizeof(struct ipv6hdr);
 	int err;
 
@@ -90,10 +89,7 @@ static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
 
 	__skb_push(skb, size);
 	skb_reset_network_header(skb);
-
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	skb_mac_header_rebuild(skb);
 
 	xfrm6_beet_make_header(skb);
 
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index 261e6e6f487e..9f2095b19ad0 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -63,7 +63,6 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err = -EINVAL;
-	const unsigned char *old_mac;
 
 	if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
 		goto out;
@@ -80,10 +79,9 @@ static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 	if (!(x->props.flags & XFRM_STATE_NOECN))
 		ipip6_ecn_decapsulate(skb);
 
-	old_mac = skb_mac_header(skb);
-	skb_set_mac_header(skb, -skb->mac_len);
-	memmove(skb_mac_header(skb), old_mac, skb->mac_len);
 	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+
 	err = 0;
 
 out:

From b8e3995af4c7da7707b1710332a31f66e06b74dc Mon Sep 17 00:00:00 2001
From: David McKay <david.mckay@st.com>
Date: Tue, 21 Feb 2012 21:24:57 +0000
Subject: [PATCH 173/202] netdev/phy/icplus: Correct broken phy_init code

The code for ip1001_config_init() was totally broken if you were not
using RGMII. Instead of returning an error code or zero it actually
returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was
also trying to set the IP1001_APS_ON bit , but never actually wrote
back the register.

The error checking was also incorrect in both this function and the
reset function, so this patch fixes that up in a consistent fashion.

Signed-off-by: David McKay <david.mckay@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/icplus.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index c81f136ae670..7ee4f5822bb9 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -98,20 +98,24 @@ static int ip175c_config_init(struct phy_device *phydev)
 
 static int ip1xx_reset(struct phy_device *phydev)
 {
-	int err, bmcr;
+	int bmcr;
 
 	/* Software Reset PHY */
 	bmcr = phy_read(phydev, MII_BMCR);
+	if (bmcr < 0)
+		return bmcr;
 	bmcr |= BMCR_RESET;
-	err = phy_write(phydev, MII_BMCR, bmcr);
-	if (err < 0)
-		return err;
+	bmcr = phy_write(phydev, MII_BMCR, bmcr);
+	if (bmcr < 0)
+		return bmcr;
 
 	do {
 		bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
 	} while (bmcr & BMCR_RESET);
 
-	return err;
+	return 0;
 }
 
 static int ip1001_config_init(struct phy_device *phydev)
@@ -124,7 +128,10 @@ static int ip1001_config_init(struct phy_device *phydev)
 
 	/* Enable Auto Power Saving mode */
 	c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
+	if (c < 0)
+		return c;
 	c |= IP1001_APS_ON;
+	c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
 	if (c < 0)
 		return c;
 
@@ -132,11 +139,16 @@ static int ip1001_config_init(struct phy_device *phydev)
 		/* Additional delay (2ns) used to adjust RX clock phase
 		 * at RGMII interface */
 		c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+		if (c < 0)
+			return c;
+
 		c |= IP1001_PHASE_SEL_MASK;
 		c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+		if (c < 0)
+			return c;
 	}
 
-	return c;
+	return 0;
 }
 
 static int ip101a_config_init(struct phy_device *phydev)

From e3e09f2645b435062a34a2587a32ae8e5a5b48ab Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Tue, 21 Feb 2012 21:26:28 +0000
Subject: [PATCH 174/202] phy: IC+101G and PHY_HAS_INTERRUPT flag

This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series.
Also the patch does a simple dity-up to signal that
the driver actually is for IP101A LF and IP101G devices.
In fact, these are two similar PHYs that have the same IDs
and mainly differ for the EEE capability supported in the
G series.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/icplus.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 7ee4f5822bb9..0856e1b7a849 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -30,16 +30,16 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers");
+MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
 MODULE_AUTHOR("Michael Barkowski");
 MODULE_LICENSE("GPL");
 
-/* IP101A/IP1001 */
-#define IP10XX_SPEC_CTRL_STATUS		16  /* Spec. Control Register */
-#define IP1001_SPEC_CTRL_STATUS_2	20  /* IP1001 Spec. Control Reg 2 */
-#define IP1001_PHASE_SEL_MASK		3 /* IP1001 RX/TXPHASE_SEL */
-#define IP1001_APS_ON			11  /* IP1001 APS Mode  bit */
-#define IP101A_APS_ON			2   /* IP101A APS Mode bit */
+/* IP101A/G - IP1001 */
+#define IP10XX_SPEC_CTRL_STATUS		16	/* Spec. Control Register */
+#define IP1001_SPEC_CTRL_STATUS_2	20	/* IP1001 Spec. Control Reg 2 */
+#define IP1001_PHASE_SEL_MASK		3	/* IP1001 RX/TXPHASE_SEL */
+#define IP1001_APS_ON			11	/* IP1001 APS Mode  bit */
+#define IP101A_G_APS_ON			2	/* IP101A/G APS Mode bit */
 
 static int ip175c_config_init(struct phy_device *phydev)
 {
@@ -151,7 +151,7 @@ static int ip1001_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int ip101a_config_init(struct phy_device *phydev)
+static int ip101a_g_config_init(struct phy_device *phydev)
 {
 	int c;
 
@@ -161,7 +161,7 @@ static int ip101a_config_init(struct phy_device *phydev)
 
 	/* Enable Auto Power Saving mode */
 	c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
-	c |= IP101A_APS_ON;
+	c |= IP101A_G_APS_ON;
 	return c;
 }
 
@@ -203,6 +203,7 @@ static struct phy_driver ip1001_driver = {
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_GBIT_FEATURES | SUPPORTED_Pause |
 			  SUPPORTED_Asym_Pause,
+	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &ip1001_config_init,
 	.config_aneg	= &genphy_config_aneg,
 	.read_status	= &genphy_read_status,
@@ -211,13 +212,14 @@ static struct phy_driver ip1001_driver = {
 	.driver		= { .owner = THIS_MODULE,},
 };
 
-static struct phy_driver ip101a_driver = {
+static struct phy_driver ip101a_g_driver = {
 	.phy_id		= 0x02430c54,
-	.name		= "ICPlus IP101A",
+	.name		= "ICPlus IP101A/G",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES | SUPPORTED_Pause |
 			  SUPPORTED_Asym_Pause,
-	.config_init	= &ip101a_config_init,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= &ip101a_g_config_init,
 	.config_aneg	= &genphy_config_aneg,
 	.read_status	= &genphy_read_status,
 	.suspend	= genphy_suspend,
@@ -233,7 +235,7 @@ static int __init icplus_init(void)
 	if (ret < 0)
 		return -ENODEV;
 
-	ret = phy_driver_register(&ip101a_driver);
+	ret = phy_driver_register(&ip101a_g_driver);
 	if (ret < 0)
 		return -ENODEV;
 
@@ -243,7 +245,7 @@ static int __init icplus_init(void)
 static void __exit icplus_exit(void)
 {
 	phy_driver_unregister(&ip1001_driver);
-	phy_driver_unregister(&ip101a_driver);
+	phy_driver_unregister(&ip101a_g_driver);
 	phy_driver_unregister(&ip175c_driver);
 }
 
@@ -253,6 +255,7 @@ module_exit(icplus_exit);
 static struct mdio_device_id __maybe_unused icplus_tbl[] = {
 	{ 0x02430d80, 0x0ffffff0 },
 	{ 0x02430d90, 0x0ffffff0 },
+	{ 0x02430c54, 0x0ffffff0 },
 	{ }
 };
 

From 37fbf4bfb826372c3ca6c09d8a015d1fe9f5e186 Mon Sep 17 00:00:00 2001
From: Anton Altaparmakov <aia21@cam.ac.uk>
Date: Thu, 23 Feb 2012 23:40:05 +0000
Subject: [PATCH 175/202] Restore direct_io / truncate locking API

With kernel 3.1, Christoph removed i_alloc_sem and replaced it with
calls (namely inode_dio_wait() and inode_dio_done()) which are
EXPORT_SYMBOL_GPL() thus they cannot be used by non-GPL file systems and
further inode_dio_wait() was pushed from notify_change() into the file
system ->setattr() method but no non-GPL file system can make this call.

That means non-GPL file systems cannot exist any more unless they do not
use any VFS functionality related to reading/writing as far as I can
tell or at least as long as they want to implement direct i/o.

Both Linus and Al (and others) have said on LKML that this breakage of
the VFS API should not have happened and that the change was simply
missed as it was not documented in the change logs of the patches that
did those changes.

This patch changes the two function exports in question to be
EXPORT_SYMBOL() thus restoring the VFS API as it used to be - accessible
for all modules.

Christoph, who introduced the two functions and exported them GPL-only
is CC-ed on this patch to give him the opportunity to object to the
symbols being changed in this manner if he did indeed intend them to be
GPL-only and does not want them to become available to all modules.

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/direct-io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/direct-io.c b/fs/direct-io.c
index 4a588dbd11bf..f4aadd15b613 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -173,7 +173,7 @@ void inode_dio_wait(struct inode *inode)
 	if (atomic_read(&inode->i_dio_count))
 		__inode_dio_wait(inode);
 }
-EXPORT_SYMBOL_GPL(inode_dio_wait);
+EXPORT_SYMBOL(inode_dio_wait);
 
 /*
  * inode_dio_done - signal finish of a direct I/O requests
@@ -187,7 +187,7 @@ void inode_dio_done(struct inode *inode)
 	if (atomic_dec_and_test(&inode->i_dio_count))
 		wake_up_bit(&inode->i_state, __I_DIO_WAKEUP);
 }
-EXPORT_SYMBOL_GPL(inode_dio_done);
+EXPORT_SYMBOL(inode_dio_done);
 
 /*
  * How many pages are in the queue?

From ecfb68c673dc71579b53a46fa22168e7a11f2f19 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Sat, 4 Feb 2012 21:40:24 +0900
Subject: [PATCH 176/202] sh: Fix typo in pci-sh7780.c

Correct spelling "erorr" to "error" in
arch/sh/drivers/pci/pci-sh7780.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci-sh7780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index fa7b978cc727..fb8f14990743 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -74,7 +74,7 @@ struct pci_errors {
 	{ SH4_PCIINT_MLCK,	"master lock error" },
 	{ SH4_PCIINT_TABT,	"target-target abort" },
 	{ SH4_PCIINT_TRET,	"target retry time out" },
-	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
 	{ SH4_PCIINT_PRTY,	"address parity error" },
 	{ SH4_PCIINT_SERR,	"SERR" },
 	{ SH4_PCIINT_TWDP,	"data parity error for target write" },

From 004f4ce9f3d50044e9542aac466e44fa3ef0258f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 15 Feb 2012 15:28:04 +1030
Subject: [PATCH 177/202] arch/sh: remove references to cpu_*_map.

This has been obsolescent for a while; time for the final push.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/smp.c      | 2 +-
 arch/sh/kernel/topology.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 3147a9a6fb8b..f624174bf239 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	init_cpu_present(&cpu_possible_map);
+	init_cpu_present(cpu_possible_mask);
 #endif
 }
 
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 4649a6ff0cfe..772caffba22f 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
 	 * simple until we have a method for determining topology..
 	 */
-	return cpu_possible_map;
+	return *cpu_possible_mask;
 }
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu)

From befe0756d5fa5841f02e2029bbcc77225b9a13bb Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Mon, 20 Feb 2012 17:26:50 +0900
Subject: [PATCH 178/202] sh: modify a resource of sh_eth_giga1_resources in
 board-sh7757lcr

The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 8d2ae109a83a..24b1ee410daa 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -168,6 +168,11 @@ static struct resource sh_eth_giga1_resources[] = {
 		.start  = 0xfee00800,
 		.end    = 0xfee00fff,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 316,
 		.end    = 316,

From 1ae911cba414f7e805b2cb3798fa402b36a21601 Mon Sep 17 00:00:00 2001
From: Phil Edworthy <phil.edworthy@renesas.com>
Date: Tue, 21 Feb 2012 08:29:57 +0000
Subject: [PATCH 179/202] sh: Fix sh2a build error for
 CONFIG_CACHE_WRITETHROUGH

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh2a.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index ae08cbbfa569..949e2d3138a0 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -23,6 +23,7 @@
 #define MAX_OCACHE_PAGES	32
 #define MAX_ICACHE_PAGES	32
 
+#ifdef CONFIG_CACHE_WRITEBACK
 static void sh2a_flush_oc_line(unsigned long v, int way)
 {
 	unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
 		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
 	}
 }
+#endif
 
 static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
 {

From 689189fb014203965ed89833d8d5566424540c9d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 30 Jan 2012 11:03:49 +0900
Subject: [PATCH 180/202] ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix

Convert the sh73a0 SMP code to use 32-bit PSTR access.

This fixes wakeup from deep sleep for sh73a0 secondary CPUs.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0d159d64a345..2d0d4212be41 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */

From 74eb436ec057e31e35addda35f9b94ee813cb633 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 30 Jan 2012 11:25:07 +0900
Subject: [PATCH 181/202] ARM: mach-shmobile: r8a7779 PFC IPSR4 fix

Fix the bit field width information for the IPSR4 register
in the r8a7779 pin function controller (PFC).

Without this fix the Marzen board fails to receive data
over the serial console due to misconfigured pin function
for the RX pin.

Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/pfc-r8a7779.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f2b2c4..d14c9b048077 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,

From 7372a4cd6c6fe07ae9d7d0340717736fba863580 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Thu, 16 Feb 2012 15:46:38 +0100
Subject: [PATCH 182/202] arch/arm/mach-shmobile/board-ag5evm.c: included
 linux/dma-mapping.h twice

arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h'
twice, remove the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 9245f21c29d1..068b754bc348 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -38,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>

From 1e0f03d57d7092f1f4d93a91fb7ece57b1514a88 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Thu, 23 Feb 2012 07:04:35 +0000
Subject: [PATCH 183/202] mlx4_core: Fixing array indexes when setting port
 types

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 32f8799db190..d498f049c74e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -538,7 +538,7 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 		mlx4_unregister_device(dev);
 		for (port = 1; port <= dev->caps.num_ports; port++) {
 			mlx4_CLOSE_PORT(dev, port);
-			dev->caps.port_type[port + 1] = port_types[port];
+			dev->caps.port_type[port] = port_types[port - 1];
 			err = mlx4_SET_PORT(dev, port);
 			if (err) {
 				mlx4_err(dev, "Failed to set port %d, "

From 5d69703263d588dbb03f4e57091afd8942d96e6d Mon Sep 17 00:00:00 2001
From: Christian Riesch <christian.riesch@omicron.at>
Date: Thu, 23 Feb 2012 01:14:17 +0000
Subject: [PATCH 184/202] davinci_emac: Do not free all rx dma descriptors
 during init

This patch fixes a regression that was introduced by

commit 0a5f38467765ee15478db90d81e40c269c8dda20
davinci_emac: Add Carrier Link OK check in Davinci RX Handler

Said commit adds a check whether the carrier link is ok. If the link is
not ok, the skb is freed and no new dma descriptor added to the rx dma
channel. This causes trouble during initialization when the carrier
status has not yet been updated. If a lot of packets are received while
netif_carrier_ok returns false, all dma descriptors are freed and the
rx dma transfer is stopped.

The bug occurs when the board is connected to a network with lots of
traffic and the ifconfig down/up is done, e.g., when reconfiguring
the interface with DHCP.

The bug can be reproduced by flood pinging the davinci board while doing
ifconfig eth0 down
ifconfig eth0 up
on the board.

After that, the rx path stops working and the overrun value reported
by ifconfig is counting up.

This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20
and instead issues warnings only if cpdma_chan_submit returns -ENOMEM.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: <stable@vger.kernel.org>
Cc: Hegde, Vinay <vinay.hegde@ti.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/ti/davinci_emac.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 4fa0bcb25dfc..4b2f54565f64 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1009,7 +1009,7 @@ static void emac_rx_handler(void *token, int len, int status)
 	int			ret;
 
 	/* free and bail if we are shutting down */
-	if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
+	if (unlikely(!netif_running(ndev))) {
 		dev_kfree_skb_any(skb);
 		return;
 	}
@@ -1038,7 +1038,9 @@ static void emac_rx_handler(void *token, int len, int status)
 recycle:
 	ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
 			skb_tailroom(skb), GFP_KERNEL);
-	if (WARN_ON(ret < 0))
+
+	WARN_ON(ret == -ENOMEM);
+	if (unlikely(ret < 0))
 		dev_kfree_skb_any(skb);
 }
 

From 279072882dc0149e5740dace075e1a49f087046d Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Fri, 24 Feb 2012 12:18:38 +0100
Subject: [PATCH 185/202] Revert "netfilter: ctnetlink: fix soft lockup when
 netlink adds new entries"

This reverts commit af14cca162ddcdea017b648c21b9b091e4bf1fa4.

This patch contains a race condition between packets and ctnetlink
in the conntrack addition. A new patch to fix this issue follows up.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 net/netfilter/nf_conntrack_netlink.c | 43 +++++++++++++++++-----------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index cc705175765c..9307b033c0c9 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1367,12 +1367,15 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 						    nf_ct_protonum(ct));
 		if (helper == NULL) {
 			rcu_read_unlock();
+			spin_unlock_bh(&nf_conntrack_lock);
 #ifdef CONFIG_MODULES
 			if (request_module("nfct-helper-%s", helpname) < 0) {
+				spin_lock_bh(&nf_conntrack_lock);
 				err = -EOPNOTSUPP;
 				goto err1;
 			}
 
+			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			helper = __nf_conntrack_helper_find(helpname,
 							    nf_ct_l3num(ct),
@@ -1466,10 +1469,7 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 		tstamp->start = ktime_to_ns(ktime_get_real());
 
 	add_timer(&ct->timeout);
-	spin_lock_bh(&nf_conntrack_lock);
 	nf_conntrack_hash_insert(ct);
-	nf_conntrack_get(&ct->ct_general);
-	spin_unlock_bh(&nf_conntrack_lock);
 	rcu_read_unlock();
 
 	return ct;
@@ -1490,7 +1490,6 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple otuple, rtuple;
 	struct nf_conntrack_tuple_hash *h = NULL;
 	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
-	struct nf_conn *ct;
 	u_int8_t u3 = nfmsg->nfgen_family;
 	u16 zone;
 	int err;
@@ -1513,22 +1512,25 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 
 	spin_lock_bh(&nf_conntrack_lock);
 	if (cda[CTA_TUPLE_ORIG])
-		h = nf_conntrack_find_get(net, zone, &otuple);
+		h = __nf_conntrack_find(net, zone, &otuple);
 	else if (cda[CTA_TUPLE_REPLY])
-		h = nf_conntrack_find_get(net, zone, &rtuple);
-	spin_unlock_bh(&nf_conntrack_lock);
+		h = __nf_conntrack_find(net, zone, &rtuple);
 
 	if (h == NULL) {
 		err = -ENOENT;
 		if (nlh->nlmsg_flags & NLM_F_CREATE) {
+			struct nf_conn *ct;
 			enum ip_conntrack_events events;
 
 			ct = ctnetlink_create_conntrack(net, zone, cda, &otuple,
 							&rtuple, u3);
-			if (IS_ERR(ct))
-				return PTR_ERR(ct);
-
+			if (IS_ERR(ct)) {
+				err = PTR_ERR(ct);
+				goto out_unlock;
+			}
 			err = 0;
+			nf_conntrack_get(&ct->ct_general);
+			spin_unlock_bh(&nf_conntrack_lock);
 			if (test_bit(IPS_EXPECTED_BIT, &ct->status))
 				events = IPCT_RELATED;
 			else
@@ -1543,19 +1545,23 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
 			nf_ct_put(ct);
-		}
+		} else
+			spin_unlock_bh(&nf_conntrack_lock);
 
 		return err;
 	}
 	/* implicit 'else' */
 
+	/* We manipulate the conntrack inside the global conntrack table lock,
+	 * so there's no need to increase the refcount */
 	err = -EEXIST;
-	ct = nf_ct_tuplehash_to_ctrack(h);
 	if (!(nlh->nlmsg_flags & NLM_F_EXCL)) {
-		spin_lock_bh(&nf_conntrack_lock);
+		struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
+
 		err = ctnetlink_change_conntrack(ct, cda);
-		spin_unlock_bh(&nf_conntrack_lock);
 		if (err == 0) {
+			nf_conntrack_get(&ct->ct_general);
+			spin_unlock_bh(&nf_conntrack_lock);
 			nf_conntrack_eventmask_report((1 << IPCT_REPLY) |
 						      (1 << IPCT_ASSURED) |
 						      (1 << IPCT_HELPER) |
@@ -1564,10 +1570,15 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      (1 << IPCT_MARK),
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
-		}
+			nf_ct_put(ct);
+		} else
+			spin_unlock_bh(&nf_conntrack_lock);
+
+		return err;
 	}
 
-	nf_ct_put(ct);
+out_unlock:
+	spin_unlock_bh(&nf_conntrack_lock);
 	return err;
 }
 

From 7d367e06688dc7a2cc98c2ace04e1296e1d987e2 Mon Sep 17 00:00:00 2001
From: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Date: Fri, 24 Feb 2012 11:45:49 +0100
Subject: [PATCH 186/202] netfilter: ctnetlink: fix soft lockup when netlink
 adds new entries (v2)

Marcell Zambo and Janos Farago noticed and reported that when
new conntrack entries are added via netlink and the conntrack table
gets full, soft lockup happens. This is because the nf_conntrack_lock
is held while nf_conntrack_alloc is called, which is in turn wants
to lock nf_conntrack_lock while evicting entries from the full table.

The patch fixes the soft lockup with limiting the holding of the
nf_conntrack_lock to the minimum, where it's absolutely required.
It required to extend (and thus change) nf_conntrack_hash_insert
so that it makes sure conntrack and ctnetlink do not add the same entry
twice to the conntrack table.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 include/net/netfilter/nf_conntrack.h |  2 +-
 net/netfilter/nf_conntrack_core.c    | 38 ++++++++++++++++++++---
 net/netfilter/nf_conntrack_netlink.c | 46 ++++++++++------------------
 3 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 8a2b0ae7dbd2..ab86036bbf0c 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -209,7 +209,7 @@ extern struct nf_conntrack_tuple_hash *
 __nf_conntrack_find(struct net *net, u16 zone,
 		    const struct nf_conntrack_tuple *tuple);
 
-extern void nf_conntrack_hash_insert(struct nf_conn *ct);
+extern int nf_conntrack_hash_check_insert(struct nf_conn *ct);
 extern void nf_ct_delete_from_lists(struct nf_conn *ct);
 extern void nf_ct_insert_dying_list(struct nf_conn *ct);
 
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 76613f5a55c0..ed86a3be678e 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -404,19 +404,49 @@ static void __nf_conntrack_hash_insert(struct nf_conn *ct,
 			   &net->ct.hash[repl_hash]);
 }
 
-void nf_conntrack_hash_insert(struct nf_conn *ct)
+int
+nf_conntrack_hash_check_insert(struct nf_conn *ct)
 {
 	struct net *net = nf_ct_net(ct);
 	unsigned int hash, repl_hash;
+	struct nf_conntrack_tuple_hash *h;
+	struct hlist_nulls_node *n;
 	u16 zone;
 
 	zone = nf_ct_zone(ct);
-	hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-	repl_hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+	hash = hash_conntrack(net, zone,
+			      &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+	repl_hash = hash_conntrack(net, zone,
+				   &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
 
+	spin_lock_bh(&nf_conntrack_lock);
+
+	/* See if there's one in the list already, including reverse */
+	hlist_nulls_for_each_entry(h, n, &net->ct.hash[hash], hnnode)
+		if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+				      &h->tuple) &&
+		    zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+			goto out;
+	hlist_nulls_for_each_entry(h, n, &net->ct.hash[repl_hash], hnnode)
+		if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_REPLY].tuple,
+				      &h->tuple) &&
+		    zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+			goto out;
+
+	add_timer(&ct->timeout);
+	nf_conntrack_get(&ct->ct_general);
 	__nf_conntrack_hash_insert(ct, hash, repl_hash);
+	NF_CT_STAT_INC(net, insert);
+	spin_unlock_bh(&nf_conntrack_lock);
+
+	return 0;
+
+out:
+	NF_CT_STAT_INC(net, insert_failed);
+	spin_unlock_bh(&nf_conntrack_lock);
+	return -EEXIST;
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert);
+EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
 
 /* Confirm a connection given skb; places it in hash table */
 int
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 9307b033c0c9..30c9d4ca0218 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1367,15 +1367,12 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 						    nf_ct_protonum(ct));
 		if (helper == NULL) {
 			rcu_read_unlock();
-			spin_unlock_bh(&nf_conntrack_lock);
 #ifdef CONFIG_MODULES
 			if (request_module("nfct-helper-%s", helpname) < 0) {
-				spin_lock_bh(&nf_conntrack_lock);
 				err = -EOPNOTSUPP;
 				goto err1;
 			}
 
-			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			helper = __nf_conntrack_helper_find(helpname,
 							    nf_ct_l3num(ct),
@@ -1468,8 +1465,10 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 	if (tstamp)
 		tstamp->start = ktime_to_ns(ktime_get_real());
 
-	add_timer(&ct->timeout);
-	nf_conntrack_hash_insert(ct);
+	err = nf_conntrack_hash_check_insert(ct);
+	if (err < 0)
+		goto err2;
+
 	rcu_read_unlock();
 
 	return ct;
@@ -1490,6 +1489,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple otuple, rtuple;
 	struct nf_conntrack_tuple_hash *h = NULL;
 	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
+	struct nf_conn *ct;
 	u_int8_t u3 = nfmsg->nfgen_family;
 	u16 zone;
 	int err;
@@ -1510,27 +1510,22 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 			return err;
 	}
 
-	spin_lock_bh(&nf_conntrack_lock);
 	if (cda[CTA_TUPLE_ORIG])
-		h = __nf_conntrack_find(net, zone, &otuple);
+		h = nf_conntrack_find_get(net, zone, &otuple);
 	else if (cda[CTA_TUPLE_REPLY])
-		h = __nf_conntrack_find(net, zone, &rtuple);
+		h = nf_conntrack_find_get(net, zone, &rtuple);
 
 	if (h == NULL) {
 		err = -ENOENT;
 		if (nlh->nlmsg_flags & NLM_F_CREATE) {
-			struct nf_conn *ct;
 			enum ip_conntrack_events events;
 
 			ct = ctnetlink_create_conntrack(net, zone, cda, &otuple,
 							&rtuple, u3);
-			if (IS_ERR(ct)) {
-				err = PTR_ERR(ct);
-				goto out_unlock;
-			}
+			if (IS_ERR(ct))
+				return PTR_ERR(ct);
+
 			err = 0;
-			nf_conntrack_get(&ct->ct_general);
-			spin_unlock_bh(&nf_conntrack_lock);
 			if (test_bit(IPS_EXPECTED_BIT, &ct->status))
 				events = IPCT_RELATED;
 			else
@@ -1545,23 +1540,19 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
 			nf_ct_put(ct);
-		} else
-			spin_unlock_bh(&nf_conntrack_lock);
+		}
 
 		return err;
 	}
 	/* implicit 'else' */
 
-	/* We manipulate the conntrack inside the global conntrack table lock,
-	 * so there's no need to increase the refcount */
 	err = -EEXIST;
+	ct = nf_ct_tuplehash_to_ctrack(h);
 	if (!(nlh->nlmsg_flags & NLM_F_EXCL)) {
-		struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
-
+		spin_lock_bh(&nf_conntrack_lock);
 		err = ctnetlink_change_conntrack(ct, cda);
+		spin_unlock_bh(&nf_conntrack_lock);
 		if (err == 0) {
-			nf_conntrack_get(&ct->ct_general);
-			spin_unlock_bh(&nf_conntrack_lock);
 			nf_conntrack_eventmask_report((1 << IPCT_REPLY) |
 						      (1 << IPCT_ASSURED) |
 						      (1 << IPCT_HELPER) |
@@ -1570,15 +1561,10 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 						      (1 << IPCT_MARK),
 						      ct, NETLINK_CB(skb).pid,
 						      nlmsg_report(nlh));
-			nf_ct_put(ct);
-		} else
-			spin_unlock_bh(&nf_conntrack_lock);
-
-		return err;
+		}
 	}
 
-out_unlock:
-	spin_unlock_bh(&nf_conntrack_lock);
+	nf_ct_put(ct);
 	return err;
 }
 

From e77266e4c4be6f9dc91bf688bce015a8babd5fe0 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Fri, 24 Feb 2012 10:39:05 -0500
Subject: [PATCH 187/202] Btrfs: fix compiler warnings on 32 bit systems

The enospc tracing code added some interesting uses of
u64 pointer casts.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/check-integrity.c |  2 +-
 fs/btrfs/extent-tree.c     | 35 +++++++++++++++++++----------------
 fs/btrfs/inode-map.c       |  6 ++++--
 fs/btrfs/transaction.c     |  3 ++-
 4 files changed, 26 insertions(+), 20 deletions(-)

diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index b669a7d8e499..d986824bb2b4 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -644,7 +644,7 @@ static struct btrfsic_dev_state *btrfsic_dev_state_hashtable_lookup(
 static int btrfsic_process_superblock(struct btrfsic_state *state,
 				      struct btrfs_fs_devices *fs_devices)
 {
-	int ret;
+	int ret = 0;
 	struct btrfs_super_block *selected_super;
 	struct list_head *dev_head = &fs_devices->devices;
 	struct btrfs_device *device;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 079e5a1c343c..37e0a800d34e 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3312,7 +3312,8 @@ commit_trans:
 	}
 	data_sinfo->bytes_may_use += bytes;
 	trace_btrfs_space_reservation(root->fs_info, "space_info",
-				      (u64)data_sinfo, bytes, 1);
+				      (u64)(unsigned long)data_sinfo,
+				      bytes, 1);
 	spin_unlock(&data_sinfo->lock);
 
 	return 0;
@@ -3333,7 +3334,8 @@ void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes)
 	spin_lock(&data_sinfo->lock);
 	data_sinfo->bytes_may_use -= bytes;
 	trace_btrfs_space_reservation(root->fs_info, "space_info",
-				      (u64)data_sinfo, bytes, 0);
+				      (u64)(unsigned long)data_sinfo,
+				      bytes, 0);
 	spin_unlock(&data_sinfo->lock);
 }
 
@@ -3698,9 +3700,9 @@ again:
 		if (used + orig_bytes <= space_info->total_bytes) {
 			space_info->bytes_may_use += orig_bytes;
 			trace_btrfs_space_reservation(root->fs_info,
-						      "space_info",
-						      (u64)space_info,
-						      orig_bytes, 1);
+					      "space_info",
+					      (u64)(unsigned long)space_info,
+					      orig_bytes, 1);
 			ret = 0;
 		} else {
 			/*
@@ -3769,9 +3771,9 @@ again:
 		if (used + num_bytes < space_info->total_bytes + avail) {
 			space_info->bytes_may_use += orig_bytes;
 			trace_btrfs_space_reservation(root->fs_info,
-						      "space_info",
-						      (u64)space_info,
-						      orig_bytes, 1);
+					      "space_info",
+					      (u64)(unsigned long)space_info,
+					      orig_bytes, 1);
 			ret = 0;
 		} else {
 			wait_ordered = true;
@@ -3916,8 +3918,8 @@ static void block_rsv_release_bytes(struct btrfs_fs_info *fs_info,
 			spin_lock(&space_info->lock);
 			space_info->bytes_may_use -= num_bytes;
 			trace_btrfs_space_reservation(fs_info, "space_info",
-						      (u64)space_info,
-						      num_bytes, 0);
+					      (u64)(unsigned long)space_info,
+					      num_bytes, 0);
 			space_info->reservation_progress++;
 			spin_unlock(&space_info->lock);
 		}
@@ -4135,14 +4137,14 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info)
 		block_rsv->reserved += num_bytes;
 		sinfo->bytes_may_use += num_bytes;
 		trace_btrfs_space_reservation(fs_info, "space_info",
-					      (u64)sinfo, num_bytes, 1);
+				      (u64)(unsigned long)sinfo, num_bytes, 1);
 	}
 
 	if (block_rsv->reserved >= block_rsv->size) {
 		num_bytes = block_rsv->reserved - block_rsv->size;
 		sinfo->bytes_may_use -= num_bytes;
 		trace_btrfs_space_reservation(fs_info, "space_info",
-					      (u64)sinfo, num_bytes, 0);
+				      (u64)(unsigned long)sinfo, num_bytes, 0);
 		sinfo->reservation_progress++;
 		block_rsv->reserved = block_rsv->size;
 		block_rsv->full = 1;
@@ -4195,7 +4197,8 @@ void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
 	if (!trans->bytes_reserved)
 		return;
 
-	trace_btrfs_space_reservation(root->fs_info, "transaction", (u64)trans,
+	trace_btrfs_space_reservation(root->fs_info, "transaction",
+				      (u64)(unsigned long)trans,
 				      trans->bytes_reserved, 0);
 	btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
 	trans->bytes_reserved = 0;
@@ -4713,9 +4716,9 @@ static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
 			space_info->bytes_reserved += num_bytes;
 			if (reserve == RESERVE_ALLOC) {
 				trace_btrfs_space_reservation(cache->fs_info,
-							      "space_info",
-							      (u64)space_info,
-							      num_bytes, 0);
+					      "space_info",
+					      (u64)(unsigned long)space_info,
+					      num_bytes, 0);
 				space_info->bytes_may_use -= num_bytes;
 			}
 		}
diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index 213ffa86ce1b..ee15d88b33d2 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -438,7 +438,8 @@ int btrfs_save_ino_cache(struct btrfs_root *root,
 					  trans->bytes_reserved);
 	if (ret)
 		goto out;
-	trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+	trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+				      (u64)(unsigned long)trans,
 				      trans->bytes_reserved, 1);
 again:
 	inode = lookup_free_ino_inode(root, path);
@@ -500,7 +501,8 @@ again:
 out_put:
 	iput(inode);
 out_release:
-	trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+	trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+				      (u64)(unsigned long)trans,
 				      trans->bytes_reserved, 0);
 	btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
 out:
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 016977beee5c..04b77e3ceb7a 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -327,7 +327,8 @@ again:
 
 	if (num_bytes) {
 		trace_btrfs_space_reservation(root->fs_info, "transaction",
-					      (u64)h, num_bytes, 1);
+					      (u64)(unsigned long)h,
+					      num_bytes, 1);
 		h->block_rsv = &root->fs_info->trans_block_rsv;
 		h->bytes_reserved = num_bytes;
 	}

From dc91ad8e84593eb49c65cca70537088782b21e08 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Fri, 24 Feb 2012 03:44:34 -0800
Subject: [PATCH 188/202] hwmon: (max34440) Fix resetting temperature history

Temperature history is reset by writing 0x8000 into the peak temperature
register, not 0xffff.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/pmbus/max34440.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index beaf5a8d9c45..9b97a5b3cf3d 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -82,7 +82,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		ret = pmbus_write_word_data(client, page,
 					    MAX34440_MFR_TEMPERATURE_PEAK,
-					    0xffff);
+					    0x8000);
 		break;
 	default:
 		ret = -ENODATA;

From 371528caec553785c37f73fa3926ea0de84f986f Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <anton.vorontsov@linaro.org>
Date: Fri, 24 Feb 2012 05:14:46 +0400
Subject: [PATCH 189/202] mm: memcg: Correct unregistring of events attached to
 the same eventfd

There is an issue when memcg unregisters events that were attached to
the same eventfd:

- On the first call mem_cgroup_usage_unregister_event() removes all
  events attached to a given eventfd, and if there were no events left,
  thresholds->primary would become NULL;

- Since there were several events registered, cgroups core will call
  mem_cgroup_usage_unregister_event() again, but now kernel will oops,
  as the function doesn't expect that threshold->primary may be NULL.

That's a good question whether mem_cgroup_usage_unregister_event()
should actually remove all events in one go, but nowadays it can't
do any better as cftype->unregister_event callback doesn't pass
any private event-associated cookie. So, let's fix the issue by
simply checking for threshold->primary.

FWIW, w/o the patch the following oops may be observed:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs
 RIP: 0010:[<ffffffff810be32c>]  [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
 RSP: 0018:ffff88001d0b9d60  EFLAGS: 00010246
 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0)
 Call Trace:
  [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60
  [<ffffffff8103db94>] process_one_work+0x174/0x450
  [<ffffffff8103e413>] worker_thread+0x123/0x2d0

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 6728a7ae6f2d..228d6461c12a 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4414,6 +4414,9 @@ static void mem_cgroup_usage_unregister_event(struct cgroup *cgrp,
 	 */
 	BUG_ON(!thresholds);
 
+	if (!thresholds->primary)
+		goto unlock;
+
 	usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
 
 	/* Check if a threshold crossed before removing */
@@ -4462,7 +4465,7 @@ swap_buffers:
 
 	/* To be sure that nobody uses thresholds */
 	synchronize_rcu();
-
+unlock:
 	mutex_unlock(&memcg->thresholds_lock);
 }
 

From 918e556ec214ed2f584e4cac56d7b29e4bb6bf27 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 23 Feb 2012 13:50:35 +0000
Subject: [PATCH 190/202] NOMMU: Lock i_mmap_mutex for access to the VMA prio
 list

Lock i_mmap_mutex for access to the VMA prio list to prevent concurrent
access.  Currently, certain parts of the mmap handling are protected by
the region mutex, but not all.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/nommu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/mm/nommu.c b/mm/nommu.c
index b982290fd962..ee7e57ebef6a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -696,9 +696,11 @@ static void add_vma_to_mm(struct mm_struct *mm, struct vm_area_struct *vma)
 	if (vma->vm_file) {
 		mapping = vma->vm_file->f_mapping;
 
+		mutex_lock(&mapping->i_mmap_mutex);
 		flush_dcache_mmap_lock(mapping);
 		vma_prio_tree_insert(vma, &mapping->i_mmap);
 		flush_dcache_mmap_unlock(mapping);
+		mutex_unlock(&mapping->i_mmap_mutex);
 	}
 
 	/* add the VMA to the tree */
@@ -760,9 +762,11 @@ static void delete_vma_from_mm(struct vm_area_struct *vma)
 	if (vma->vm_file) {
 		mapping = vma->vm_file->f_mapping;
 
+		mutex_lock(&mapping->i_mmap_mutex);
 		flush_dcache_mmap_lock(mapping);
 		vma_prio_tree_remove(vma, &mapping->i_mmap);
 		flush_dcache_mmap_unlock(mapping);
+		mutex_unlock(&mapping->i_mmap_mutex);
 	}
 
 	/* remove from the MM's tree and list */
@@ -2052,6 +2056,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
 	high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 	down_write(&nommu_region_sem);
+	mutex_lock(&inode->i_mapping->i_mmap_mutex);
 
 	/* search for VMAs that fall within the dead zone */
 	vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
@@ -2059,6 +2064,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
 		/* found one - only interested if it's shared out of the page
 		 * cache */
 		if (vma->vm_flags & VM_SHARED) {
+			mutex_unlock(&inode->i_mapping->i_mmap_mutex);
 			up_write(&nommu_region_sem);
 			return -ETXTBSY; /* not quite true, but near enough */
 		}
@@ -2086,6 +2092,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
 		}
 	}
 
+	mutex_unlock(&inode->i_mapping->i_mmap_mutex);
 	up_write(&nommu_region_sem);
 	return 0;
 }

From b94cfaf6685d691dc3fab023cf32f65e9b7be09c Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 23 Feb 2012 13:51:00 +0000
Subject: [PATCH 191/202] NOMMU: Don't need to clear vm_mm when deleting a VMA

Don't clear vm_mm in a deleted VMA as it's unnecessary and might
conceivably break the filesystem or driver VMA close routine.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/nommu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/mm/nommu.c b/mm/nommu.c
index ee7e57ebef6a..f59e170fceb4 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -779,8 +779,6 @@ static void delete_vma_from_mm(struct vm_area_struct *vma)
 
 	if (vma->vm_next)
 		vma->vm_next->vm_prev = vma->vm_prev;
-
-	vma->vm_mm = NULL;
 }
 
 /*

From b38a03b8bbb96ace10497af39e6cb656673fbcac Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@redhat.com>
Date: Fri, 24 Feb 2012 10:36:16 -0500
Subject: [PATCH 192/202] MAINTAINERS: drop me from PA-RISC maintenance

I don't even live in the same country as any of my PA-RISC hardware
these days, so the odds of me touching the code are pretty low.
(Also re-order things to ensure jejb gets CC'd since he's been the
primary maintainer for the last few years.)

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 924fb0bb52e0..75a9a5fc230a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -3047,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h
 
 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -5000,9 +4998,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/

From d80e731ecab420ddcb79ee9d0ac427acbc187b4b Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 24 Feb 2012 20:07:11 +0100
Subject: [PATCH 193/202] epoll: introduce POLLFREE to flush ->signalfd_wqh
 before kfree()

This patch is intentionally incomplete to simplify the review.
It ignores ep_unregister_pollwait() which plays with the same wqh.
See the next change.

epoll assumes that the EPOLL_CTL_ADD'ed file controls everything
f_op->poll() needs. In particular it assumes that the wait queue
can't go away until eventpoll_release(). This is not true in case
of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand
which is not connected to the file.

This patch adds the special event, POLLFREE, currently only for
epoll. It expects that init_poll_funcptr()'ed hook should do the
necessary cleanup. Perhaps it should be defined as EPOLLFREE in
eventpoll.

__cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if
->signalfd_wqh is not empty, we add the new signalfd_cleanup()
helper.

ep_poll_callback(POLLFREE) simply does list_del_init(task_list).
This make this poll entry inconsistent, but we don't care. If you
share epoll fd which contains our sigfd with another process you
should blame yourself. signalfd is "really special". I simply do
not know how we can define the "right" semantics if it used with
epoll.

The main problem is, epoll calls signalfd_poll() once to establish
the connection with the wait queue, after that signalfd_poll(NULL)
returns the different/inconsistent results depending on who does
EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd
has nothing to do with the file, it works with the current thread.

In short: this patch is the hack which tries to fix the symptoms.
It also assumes that nobody can take tasklist_lock under epoll
locks, this seems to be true.

Note:

	- we do not have wake_up_all_poll() but wake_up_poll()
	  is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE.

	- signalfd_cleanup() uses POLLHUP along with POLLFREE,
	  we need a couple of simple changes in eventpoll.c to
	  make sure it can't be "lost".

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Cc: <stable@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventpoll.c             |  4 ++++
 fs/signalfd.c              | 11 +++++++++++
 include/asm-generic/poll.h |  2 ++
 include/linux/signalfd.h   |  5 ++++-
 kernel/fork.c              |  5 ++++-
 5 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index aabdfc38cf24..34bbfc6dd8dc 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -842,6 +842,10 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k
 	struct epitem *epi = ep_item_from_wait(wait);
 	struct eventpoll *ep = epi->ep;
 
+	/* the caller holds eppoll_entry->whead->lock */
+	if ((unsigned long)key & POLLFREE)
+		list_del_init(&wait->task_list);
+
 	spin_lock_irqsave(&ep->lock, flags);
 
 	/*
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 492465b451dd..79c1eea98a3a 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -30,6 +30,17 @@
 #include <linux/signalfd.h>
 #include <linux/syscalls.h>
 
+void signalfd_cleanup(struct sighand_struct *sighand)
+{
+	wait_queue_head_t *wqh = &sighand->signalfd_wqh;
+
+	if (likely(!waitqueue_active(wqh)))
+		return;
+
+	/* wait_queue_t->func(POLLFREE) should do remove_wait_queue() */
+	wake_up_poll(wqh, POLLHUP | POLLFREE);
+}
+
 struct signalfd_ctx {
 	sigset_t sigmask;
 };
diff --git a/include/asm-generic/poll.h b/include/asm-generic/poll.h
index 44bce836d350..9ce7f44aebd2 100644
--- a/include/asm-generic/poll.h
+++ b/include/asm-generic/poll.h
@@ -28,6 +28,8 @@
 #define POLLRDHUP       0x2000
 #endif
 
+#define POLLFREE	0x4000	/* currently only for epoll */
+
 struct pollfd {
 	int fd;
 	short events;
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 3ff4961da9b5..247399b2979a 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -61,13 +61,16 @@ static inline void signalfd_notify(struct task_struct *tsk, int sig)
 		wake_up(&tsk->sighand->signalfd_wqh);
 }
 
+extern void signalfd_cleanup(struct sighand_struct *sighand);
+
 #else /* CONFIG_SIGNALFD */
 
 static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
 
+static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
+
 #endif /* CONFIG_SIGNALFD */
 
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_SIGNALFD_H */
-
diff --git a/kernel/fork.c b/kernel/fork.c
index b77fd559c78e..e2cd3e2a5ae8 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -66,6 +66,7 @@
 #include <linux/user-return-notifier.h>
 #include <linux/oom.h>
 #include <linux/khugepaged.h>
+#include <linux/signalfd.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -935,8 +936,10 @@ static int copy_sighand(unsigned long clone_flags, struct task_struct *tsk)
 
 void __cleanup_sighand(struct sighand_struct *sighand)
 {
-	if (atomic_dec_and_test(&sighand->count))
+	if (atomic_dec_and_test(&sighand->count)) {
+		signalfd_cleanup(sighand);
 		kmem_cache_free(sighand_cachep, sighand);
+	}
 }
 
 

From 971316f0503a5c50633d07b83b6db2f15a3a5b00 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 24 Feb 2012 20:07:29 +0100
Subject: [PATCH 194/202] epoll: ep_unregister_pollwait() can use the freed
 pwq->whead

signalfd_cleanup() ensures that ->signalfd_wqh is not used, but
this is not enough. eppoll_entry->whead still points to the memory
we are going to free, ep_unregister_pollwait()->remove_wait_queue()
is obviously unsafe.

Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL,
change ep_unregister_pollwait() to check pwq->whead != NULL under
rcu_read_lock() before remove_wait_queue(). We add the new helper,
ep_remove_wait_queue(), for this.

This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because
->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand.
ep_unregister_pollwait()->remove_wait_queue() can play with already
freed and potentially reused ->sighand, but this is fine. This memory
must have the valid ->signalfd_wqh until rcu_read_unlock().

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Cc: <stable@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventpoll.c | 30 +++++++++++++++++++++++++++---
 fs/signalfd.c  |  6 +++++-
 2 files changed, 32 insertions(+), 4 deletions(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 34bbfc6dd8dc..ea54cdef04dd 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -320,6 +320,11 @@ static inline int ep_is_linked(struct list_head *p)
 	return !list_empty(p);
 }
 
+static inline struct eppoll_entry *ep_pwq_from_wait(wait_queue_t *p)
+{
+	return container_of(p, struct eppoll_entry, wait);
+}
+
 /* Get the "struct epitem" from a wait queue pointer */
 static inline struct epitem *ep_item_from_wait(wait_queue_t *p)
 {
@@ -467,6 +472,18 @@ static void ep_poll_safewake(wait_queue_head_t *wq)
 	put_cpu();
 }
 
+static void ep_remove_wait_queue(struct eppoll_entry *pwq)
+{
+	wait_queue_head_t *whead;
+
+	rcu_read_lock();
+	/* If it is cleared by POLLFREE, it should be rcu-safe */
+	whead = rcu_dereference(pwq->whead);
+	if (whead)
+		remove_wait_queue(whead, &pwq->wait);
+	rcu_read_unlock();
+}
+
 /*
  * This function unregisters poll callbacks from the associated file
  * descriptor.  Must be called with "mtx" held (or "epmutex" if called from
@@ -481,7 +498,7 @@ static void ep_unregister_pollwait(struct eventpoll *ep, struct epitem *epi)
 		pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
 
 		list_del(&pwq->llink);
-		remove_wait_queue(pwq->whead, &pwq->wait);
+		ep_remove_wait_queue(pwq);
 		kmem_cache_free(pwq_cache, pwq);
 	}
 }
@@ -842,9 +859,16 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k
 	struct epitem *epi = ep_item_from_wait(wait);
 	struct eventpoll *ep = epi->ep;
 
-	/* the caller holds eppoll_entry->whead->lock */
-	if ((unsigned long)key & POLLFREE)
+	if ((unsigned long)key & POLLFREE) {
+		ep_pwq_from_wait(wait)->whead = NULL;
+		/*
+		 * whead = NULL above can race with ep_remove_wait_queue()
+		 * which can do another remove_wait_queue() after us, so we
+		 * can't use __remove_wait_queue(). whead->lock is held by
+		 * the caller.
+		 */
 		list_del_init(&wait->task_list);
+	}
 
 	spin_lock_irqsave(&ep->lock, flags);
 
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 79c1eea98a3a..7ae2a574cb25 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -33,7 +33,11 @@
 void signalfd_cleanup(struct sighand_struct *sighand)
 {
 	wait_queue_head_t *wqh = &sighand->signalfd_wqh;
-
+	/*
+	 * The lockless check can race with remove_wait_queue() in progress,
+	 * but in this case its caller should run under rcu_read_lock() and
+	 * sighand_cachep is SLAB_DESTROY_BY_RCU, we can safely return.
+	 */
 	if (likely(!waitqueue_active(wqh)))
 		return;
 

From bff528578fc3c4a14227b052a313109b5ffb73da Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 24 Feb 2012 08:08:20 +0000
Subject: [PATCH 195/202] gre: fix spelling in comments

The original spelling and bad word choice makes these comments hard to read.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/ip_gre.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 6b3ca5ba4450..38673d2860e2 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -65,7 +65,7 @@
    it is infeasible task. The most general solutions would be
    to keep skb->encapsulation counter (sort of local ttl),
    and silently drop packet when it expires. It is a good
-   solution, but it supposes maintaing new variable in ALL
+   solution, but it supposes maintaining new variable in ALL
    skb, even if no tunneling is used.
 
    Current solution: xmit_recursion breaks dead loops. This is a percpu
@@ -91,14 +91,14 @@
 
    One of them is to parse packet trying to detect inner encapsulation
    made by our node. It is difficult or even impossible, especially,
-   taking into account fragmentation. TO be short, tt is not solution at all.
+   taking into account fragmentation. TO be short, ttl is not solution at all.
 
    Current solution: The solution was UNEXPECTEDLY SIMPLE.
    We force DF flag on tunnels with preconfigured hop limit,
    that is ALL. :-) Well, it does not remove the problem completely,
    but exponential growth of network traffic is changed to linear
    (branches, that exceed pmtu are pruned) and tunnel mtu
-   fastly degrades to value <68, where looping stops.
+   rapidly degrades to value <68, where looping stops.
    Yes, it is not good if there exists a router in the loop,
    which does not force DF, even when encapsulating packets have DF set.
    But it is not our problem! Nobody could accuse us, we made
@@ -457,8 +457,8 @@ static void ipgre_err(struct sk_buff *skb, u32 info)
    GRE tunnels with enabled checksum. Tell them "thank you".
 
    Well, I wonder, rfc1812 was written by Cisco employee,
-   what the hell these idiots break standrads established
-   by themself???
+   what the hell these idiots break standards established
+   by themselves???
  */
 
 	const struct iphdr *iph = (const struct iphdr *)skb->data;

From 42f1c01b79d54a00012c553b95fc7fe266d82394 Mon Sep 17 00:00:00 2001
From: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Date: Fri, 20 Jan 2012 17:10:35 -0600
Subject: [PATCH 196/202] coccicheck: change handling of C={1,2} when M= is set

This patch reverts a portion of d0bc1fb4 so that coccicheck will
work properly when C=1 or C=2.

Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
---
 scripts/coccicheck | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/scripts/coccicheck b/scripts/coccicheck
index 3c2776466d87..823e972149e5 100755
--- a/scripts/coccicheck
+++ b/scripts/coccicheck
@@ -9,15 +9,10 @@ if [ "$C" = "1" -o "$C" = "2" ]; then
 #    FLAGS="-ignore_unknown_options -very_quiet"
 #    OPTIONS=$*
 
-    if [ "$KBUILD_EXTMOD" = "" ] ; then
-        # Workaround for Coccinelle < 0.2.3
-        FLAGS="-I $srctree/include -very_quiet"
-        shift $(( $# - 1 ))
-        OPTIONS=$1
-    else
-	echo M= is not currently supported when C=1 or C=2
-	exit 1
-    fi
+# Workaround for Coccinelle < 0.2.3
+	FLAGS="-I $srctree/include -very_quiet"
+	shift $(( $# - 1 ))
+	OPTIONS=$1
 else
     ONLINE=0
     FLAGS="-very_quiet"

From 21ca54e99b085b9ff4c91ca41afe42a439966109 Mon Sep 17 00:00:00 2001
From: Santosh Nayak <santoshprasadnayak@gmail.com>
Date: Fri, 24 Feb 2012 06:56:39 +0000
Subject: [PATCH 197/202] enic: Fix endianness bug.

Sparse complaints the endian bug.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/cisco/enic/cq_enet_desc.h | 2 +-
 drivers/net/ethernet/cisco/enic/enic_pp.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h
index c2c0680a1146..ac37cacc6136 100644
--- a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h
+++ b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h
@@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
 			CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
 		*fcoe_enc_error = (desc->flags &
 			CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
-		*fcoe_eof = (u8)((desc->checksum_fcoe >>
+		*fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
 			CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
 			CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
 		*checksum = 0;
diff --git a/drivers/net/ethernet/cisco/enic/enic_pp.c b/drivers/net/ethernet/cisco/enic/enic_pp.c
index 22bf03a1829e..c347b6236f8f 100644
--- a/drivers/net/ethernet/cisco/enic/enic_pp.c
+++ b/drivers/net/ethernet/cisco/enic/enic_pp.c
@@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf)
 	struct enic_port_profile *pp;
 	struct vic_provinfo *vp;
 	const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
-	const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+	const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
 	char uuid_str[38];
 	char client_mac_str[18];
 	u8 *client_mac;

From 8a49ad6e89feb5015e77ce6efeb2678947117e20 Mon Sep 17 00:00:00 2001
From: Ben McKeegan <ben@netservers.co.uk>
Date: Fri, 24 Feb 2012 06:33:56 +0000
Subject: [PATCH 198/202] ppp: fix 'ppp_mp_reconstruct bad seq' errors

This patch fixes a (mostly cosmetic) bug introduced by the patch
'ppp: Use SKB queue abstraction interfaces in fragment processing'
found here: http://www.spinics.net/lists/netdev/msg153312.html

The above patch rewrote and moved the code responsible for cleaning
up discarded fragments but the new code does not catch every case
where this is necessary.  This results in some discarded fragments
remaining in the queue, and triggering a 'bad seq' error on the
subsequent call to ppp_mp_reconstruct.  Fragments are discarded
whenever other fragments of the same frame have been lost.
This can generate a lot of unwanted and misleading log messages.

This patch also adds additional detail to the debug logging to
make it clearer which fragments were lost and which other fragments
were discarded as a result of losses. (Run pppd with 'kdebug 1'
option to enable debug logging.)

Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp/ppp_generic.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index edfa15d2e795..486b4048850d 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp)
 			continue;
 		}
 		if (PPP_MP_CB(p)->sequence != seq) {
+			u32 oldseq;
 			/* Fragment `seq' is missing.  If it is after
 			   minseq, it might arrive later, so stop here. */
 			if (seq_after(seq, minseq))
 				break;
 			/* Fragment `seq' is lost, keep going. */
 			lost = 1;
+			oldseq = seq;
 			seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
 				minseq + 1: PPP_MP_CB(p)->sequence;
+
+			if (ppp->debug & 1)
+				netdev_printk(KERN_DEBUG, ppp->dev,
+					      "lost frag %u..%u\n",
+					      oldseq, seq-1);
+
 			goto again;
 		}
 
@@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp)
 			struct sk_buff *tmp2;
 
 			skb_queue_reverse_walk_from_safe(list, p, tmp2) {
+				if (ppp->debug & 1)
+					netdev_printk(KERN_DEBUG, ppp->dev,
+						      "discarding frag %u\n",
+						      PPP_MP_CB(p)->sequence);
 				__skb_unlink(p, list);
 				kfree_skb(p);
 			}
@@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp)
 		/* If we have discarded any fragments,
 		   signal a receive error. */
 		if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
+			skb_queue_walk_safe(list, p, tmp) {
+				if (p == head)
+					break;
+				if (ppp->debug & 1)
+					netdev_printk(KERN_DEBUG, ppp->dev,
+						      "discarding frag %u\n",
+						      PPP_MP_CB(p)->sequence);
+				__skb_unlink(p, list);
+				kfree_skb(p);
+			}
+
 			if (ppp->debug & 1)
 				netdev_printk(KERN_DEBUG, ppp->dev,
 					      "  missed pkts %u..%u\n",

From ff3bc1e7527504a93710535611b2f812f3bb89bf Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Sat, 25 Feb 2012 00:03:10 +0000
Subject: [PATCH 199/202] sfc: Fix assignment of ip_summed for pre-allocated
 skbs

When pre-allocating skbs for received packets, we set ip_summed =
CHECKSUM_UNNCESSARY.  We used to change it back to CHECKSUM_NONE when
the received packet had an incorrect checksum or unhandled protocol.

Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid
some skb->ip_summed initializations') mistakenly replaced the latter
assignment with a DEBUG-only assertion that ip_summed ==
CHECKSUM_NONE.  This assertion is always false, but it seems no-one
has exercised this code path in a DEBUG build.

Fix this by moving our assignment of CHECKSUM_UNNECESSARY into
efx_rx_packet_gro().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 drivers/net/ethernet/sfc/rx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c
index aca349861767..fc52fca74193 100644
--- a/drivers/net/ethernet/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
@@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struct efx_rx_queue *rx_queue)
 		if (unlikely(!skb))
 			return -ENOMEM;
 
-		/* Adjust the SKB for padding and checksum */
+		/* Adjust the SKB for padding */
 		skb_reserve(skb, NET_IP_ALIGN);
 		rx_buf->len = skb_len - NET_IP_ALIGN;
 		rx_buf->is_page = false;
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		rx_buf->dma_addr = pci_map_single(efx->pci_dev,
 						  skb->data, rx_buf->len,
@@ -496,6 +495,7 @@ static void efx_rx_packet_gro(struct efx_channel *channel,
 
 		EFX_BUG_ON_PARANOID(!checksummed);
 		rx_buf->u.skb = NULL;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 		gro_result = napi_gro_receive(napi, skb);
 	}

From a32744d4abae24572eff7269bc17895c41bd0085 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 22 Feb 2012 20:45:44 +0800
Subject: [PATCH 200/202] autofs: work around unhappy compat problem on x86-64

When the autofs protocol version 5 packet type was added in commit
5c0a32fc2cd0 ("autofs4: add new packet type for v5 communications"), it
obvously tried quite hard to be word-size agnostic, and uses explicitly
sized fields that are all correctly aligned.

However, with the final "char name[NAME_MAX+1]" array at the end, the
actual size of the structure ends up being not very well defined:
because the struct isn't marked 'packed', doing a "sizeof()" on it will
align the size of the struct up to the biggest alignment of the members
it has.

And despite all the members being the same, the alignment of them is
different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte
alignment on x86-64.  And while 'NAME_MAX+1' ends up being a nice round
number (256), the name[] array starts out a 4-byte aligned.

End result: the "packed" size of the structure is 300 bytes: 4-byte, but
not 8-byte aligned.

As a result, despite all the fields being in the same place on all
architectures, sizeof() will round up that size to 304 bytes on
architectures that have 8-byte alignment for u64.

Note that this is *not* a problem for 32-bit compat mode on POWER, since
there __u64 is 8-byte aligned even in 32-bit mode.  But on x86, 32-bit
and 64-bit alignment is different for 64-bit entities, and as a result
the structure that has exactly the same layout has different sizes.

So on x86-64, but no other architecture, we will just subtract 4 from
the size of the structure when running in a compat task.  That way we
will write the properly sized packet that user mode expects.

Not pretty.  Sadly, this very subtle, and unnecessary, size difference
has been encoded in user space that wants to read packets of *exactly*
the right size, and will refuse to touch anything else.

Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h  |  1 +
 fs/autofs4/dev-ioctl.c |  1 +
 fs/autofs4/inode.c     |  2 ++
 fs/autofs4/waitq.c     | 22 +++++++++++++++++++---
 4 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index d8d8e7ba6a1e..eb1cc92cd67d 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -110,6 +110,7 @@ struct autofs_sb_info {
 	int sub_version;
 	int min_proto;
 	int max_proto;
+	int compat_daemon;
 	unsigned long exp_timeout;
 	unsigned int type;
 	int reghost_enabled;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 76741d8d7786..85f1fcdb30e7 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -385,6 +385,7 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp,
 		sbi->pipefd = pipefd;
 		sbi->pipe = pipe;
 		sbi->catatonic = 0;
+		sbi->compat_daemon = is_compat_task();
 	}
 out:
 	mutex_unlock(&sbi->wq_mutex);
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index e16980b00b8d..06858d955120 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -19,6 +19,7 @@
 #include <linux/parser.h>
 #include <linux/bitops.h>
 #include <linux/magic.h>
+#include <linux/compat.h>
 #include "autofs_i.h"
 #include <linux/module.h>
 
@@ -224,6 +225,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
 	set_autofs_type_indirect(&sbi->type);
 	sbi->min_proto = 0;
 	sbi->max_proto = 0;
+	sbi->compat_daemon = is_compat_task();
 	mutex_init(&sbi->wq_mutex);
 	mutex_init(&sbi->pipe_mutex);
 	spin_lock_init(&sbi->fs_lock);
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index da8876d38a7b..9c098db43344 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -91,7 +91,24 @@ static int autofs4_write(struct autofs_sb_info *sbi,
 
 	return (bytes > 0);
 }
-	
+
+/*
+ * The autofs_v5 packet was misdesigned.
+ *
+ * The packets are identical on x86-32 and x86-64, but have different
+ * alignment. Which means that 'sizeof()' will give different results.
+ * Fix it up for the case of running 32-bit user mode on a 64-bit kernel.
+ */
+static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi)
+{
+	size_t pktsz = sizeof(struct autofs_v5_packet);
+#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT)
+	if (sbi->compat_daemon > 0)
+		pktsz -= 4;
+#endif
+	return pktsz;
+}
+
 static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 				 struct autofs_wait_queue *wq,
 				 int type)
@@ -155,8 +172,7 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 	{
 		struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet;
 
-		pktsz = sizeof(*packet);
-
+		pktsz = autofs_v5_packet_size(sbi);
 		packet->wait_queue_token = wq->wait_queue_token;
 		packet->len = wq->name.len;
 		memcpy(packet->name, wq->name.name, wq->name.len);

From 6b21d18ed50c7d145220b0724ea7f2613abf0f95 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 25 Feb 2012 12:18:16 -0800
Subject: [PATCH 201/202] Linux 3.3-rc5

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 4ddd641ab615..b61a9638b6fc 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

From 3c761ea05a8900a907f32b628611873f6bef24b2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 26 Feb 2012 09:44:55 -0800
Subject: [PATCH 202/202] Fix autofs compile without CONFIG_COMPAT

The autofs compat handling fix caused a compile failure when
CONFIG_COMPAT isn't defined.

Instead of adding random #ifdef'fery in autofs, let's just make the
compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task()
just hardcodes to zero.

We could probably do something similar for a number of other cases where
we have #ifdef's in code, but this is the low-hanging fruit.

Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/compat.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/compat.h b/include/linux/compat.h
index 41c9f6515f46..7e05fcee75a1 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -561,5 +561,9 @@ asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid,
 		unsigned long liovcnt, const struct compat_iovec __user *rvec,
 		unsigned long riovcnt, unsigned long flags);
 
+#else
+
+#define is_compat_task() (0)
+
 #endif /* CONFIG_COMPAT */
 #endif /* _LINUX_COMPAT_H */