r8169: set TxConfig register after TX / RX is enabled, just like RxConfig
Commit3559d81e76
("r8169: simplify rtl_hw_start_8169") changed order of two register writes: 1) Caused RxConfig to be written before TX / RX is enabled, 2) Caused TxConfig to be written before TX / RX is enabled. At least on XIDs 10000000 ("RTL8169sb/8110sb") and 18000000 ("RTL8169sc/8110sc") such writes are ignored by the chip, leaving values in these registers intact. Change 1) was reverted by commit05212ba813
("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices"), however change 2) wasn't. In practice, this caused TxConfig's "InterFrameGap time" and "Max DMA Burst Size per Tx DMA Burst" bits to be zero dramatically reducing TX performance (in my tests it dropped from around 500Mbps to around 50Mbps). This patch fixes the issue by moving TxConfig register write a bit later in the code so it happens after TX / RX is already enabled. Fixes:05212ba813
("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
8f5c5fcf35
commit
f74dd480cf
|
@ -4634,13 +4634,13 @@ static void rtl_hw_start(struct rtl8169_private *tp)
|
|||
|
||||
rtl_set_rx_max_size(tp);
|
||||
rtl_set_rx_tx_desc_registers(tp);
|
||||
rtl_set_tx_config_registers(tp);
|
||||
RTL_W8(tp, Cfg9346, Cfg9346_Lock);
|
||||
|
||||
/* Initially a 10 us delay. Turned it into a PCI commit. - FR */
|
||||
RTL_R8(tp, IntrMask);
|
||||
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
|
||||
rtl_init_rxcfg(tp);
|
||||
rtl_set_tx_config_registers(tp);
|
||||
|
||||
rtl_set_rx_mode(tp->dev);
|
||||
/* no early-rx interrupts */
|
||||
|
|
Loading…
Reference in New Issue