Merge branch 'lpc32xx/drivers' into next/drivers

arch/arm/configs/lpc32xx_defconfig

@@ -0,0 +1,145 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_LPC32XX=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
+CONFIG_CPU_IDLE=y
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_LPC32XX=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PNX=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_PNX4008_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_EXT2_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y

arch/arm/mach-lpc32xx/Kconfig

@@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT
 
 endmenu
 
+menu "LPC32XX chip components"
+
+config ARCH_LPC32XX_IRAM_FOR_NET
+	bool "Use IRAM for network buffers"
+	default y
+	help
+	  Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
+	  network buffer.  If the total combined required buffer sizes is
+	  larger than the size of IRAM, then SDRAM will be used instead.
+
+	  This can be enabled safely if the IRAM is not intended for other
+	  uses.
+
+config ARCH_LPC32XX_MII_SUPPORT
+	bool "Check to enable MII support or leave disabled for RMII support"
+	help
+	  Say Y here to enable MII support, or N for RMII support. Regardless of
+	  which support is selected, the ethernet interface driver needs to be
+	  selected in the device driver networking section.
+
+	  The PHY3250 reference board uses RMII, so users of this board should
+	  say N.
+
+endmenu
+
 endif
 

arch/arm/mach-lpc32xx/clock.c

@@ -82,10 +82,12 @@
  *   will also impact the individual peripheral rates.
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/device.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/amba/bus.h>
@@ -97,9 +99,12 @@
 #include "clock.h"
 #include "common.h"
 
+static DEFINE_SPINLOCK(global_clkregs_lock);
+
+static int usb_pll_enable, usb_pll_valid;
+
 static struct clk clk_armpll;
 static struct clk clk_usbpll;
-static DEFINE_MUTEX(clkm_lock);
 
 /*
  * Post divider values for PLLs based on selected register value
@@ -127,7 +132,7 @@ static struct clk osc_32KHz = {
 static int local_pll397_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
 
@@ -142,7 +147,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
 		/* Wait for PLL397 lock */
 		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
 			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			(timeout > jiffies))
+			time_before(jiffies, timeout))
 			cpu_relax();
 
 		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
@@ -156,7 +161,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
 static int local_oscmain_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
 
@@ -171,7 +176,7 @@ static int local_oscmain_enable(struct clk *clk, int enable)
 		/* Wait for main oscillator to start */
 		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
 			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			(timeout > jiffies))
+			time_before(jiffies, timeout))
 			cpu_relax();
 
 		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
@@ -382,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
 static int local_usbpll_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	int ret = -ENODEV;
+	int ret = 0;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(20);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 
-	if (enable == 0) {
+	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
-		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+		LPC32XX_CLKPWR_USB_CTRL);
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
-	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+		LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable && usb_pll_valid && usb_pll_enable) {
+		ret = -ENODEV;
+		/*
+		 * If the PLL rate has been previously set, then the rate
+		 * in the PLL register is valid and can be enabled here.
+		 * Otherwise, it needs to be enabled as part of setrate.
+		 */
+
+		/*
+		 * Gate clock into PLL
+		 */
 		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
 		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
 
-		/* Wait for PLL lock */
+		/*
-		while ((timeout > jiffies) & (ret == -ENODEV)) {
+		 * Enable PLL
+		 */
+		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/*
+		 * Wait for PLL to lock
+		 */
+		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
 			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
 				ret = 0;
+			else
+				udelay(10);
 		}
 
+		/*
+		 * Gate clock from PLL if PLL is locked
+		 */
 		if (ret == 0) {
-			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
-			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+				LPC32XX_CLKPWR_USB_CTRL);
+		} else {
+			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+				LPC32XX_CLKPWR_USB_CTRL);
 		}
+	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
+		usb_pll_valid = 0;
+		usb_pll_enable = 0;
 	}
 
 	return ret;
@@ -423,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
 	 */
 	rate = rate * 1000;
 
-	clkin = clk->parent->rate;
+	clkin = clk->get_rate(clk);
 	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
 		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
 	clkin = clkin / usbdiv;
@@ -437,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
 
 static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 clkin, reg, usbdiv;
+	int ret = -ENODEV;
+	u32 clkin, usbdiv;
 	struct clk_pll_setup pllsetup;
 
 	/*
@@ -446,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 	 */
 	rate = rate * 1000;
 
-	clkin = clk->get_rate(clk);
+	clkin = clk->get_rate(clk->parent);
 	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
 		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
 	clkin = clkin / usbdiv;
@@ -455,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
 		return -EINVAL;
 
+	/*
+	 * Disable PLL clocks during PLL change
+	 */
 	local_usbpll_enable(clk, 0);
-
+	pllsetup.analog_on = 0;
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	pllsetup.analog_on = 1;
 	local_clk_usbpll_setup(&pllsetup);
 
-	clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+	/*
+	 * Start USB PLL and check PLL status
+	 */
 
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	usb_pll_valid = 1;
-	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+	usb_pll_enable = 1;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
 
-	return 0;
+	ret = local_usbpll_enable(clk, 1);
+	if (ret >= 0)
+		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+	return ret;
 }
 
 static struct clk clk_usbpll = {
@@ -926,20 +967,8 @@ static struct clk clk_lcd = {
 	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
 };
 
-static inline void clk_lock(void)
-{
-	mutex_lock(&clkm_lock);
-}
-
-static inline void clk_unlock(void)
-{
-	mutex_unlock(&clkm_lock);
-}
-
 static void local_clk_disable(struct clk *clk)
 {
-	WARN_ON(clk->usecount == 0);
-
 	/* Don't attempt to disable clock if it has no users */
 	if (clk->usecount > 0) {
 		clk->usecount--;
@@ -982,10 +1011,11 @@ static int local_clk_enable(struct clk *clk)
 int clk_enable(struct clk *clk)
 {
 	int ret;
+	unsigned long flags;
 
-	clk_lock();
+	spin_lock_irqsave(&global_clkregs_lock, flags);
 	ret = local_clk_enable(clk);
-	clk_unlock();
+	spin_unlock_irqrestore(&global_clkregs_lock, flags);
 
 	return ret;
 }
@@ -996,9 +1026,11 @@ EXPORT_SYMBOL(clk_enable);
  */
 void clk_disable(struct clk *clk)
 {
-	clk_lock();
+	unsigned long flags;
+
+	spin_lock_irqsave(&global_clkregs_lock, flags);
 	local_clk_disable(clk);
-	clk_unlock();
+	spin_unlock_irqrestore(&global_clkregs_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
@@ -1007,13 +1039,7 @@ EXPORT_SYMBOL(clk_disable);
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
-	unsigned long rate;
+	return clk->get_rate(clk);
-
-	clk_lock();
-	rate = clk->get_rate(clk);
-	clk_unlock();
-
-	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -1029,11 +1055,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	 * the actual rate set as part of the peripheral dividers
 	 * instead of high level clock control
 	 */
-	if (clk->set_rate) {
+	if (clk->set_rate)
-		clk_lock();
 		ret = clk->set_rate(clk, rate);
-		clk_unlock();
-	}
 
 	return ret;
 }
@@ -1044,15 +1067,11 @@ EXPORT_SYMBOL(clk_set_rate);
  */
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	clk_lock();
-
 	if (clk->round_rate)
 		rate = clk->round_rate(clk, rate);
 	else
 		rate = clk->get_rate(clk);
 
-	clk_unlock();
-
 	return rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
@@ -1110,12 +1129,12 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
 	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
 	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
 	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
-	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
-	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
 	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
-	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
-	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+	_REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
 	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
 	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
 	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)

arch/arm/mach-lpc32xx/common.c

@@ -159,6 +159,53 @@ struct platform_device lpc32xx_adc_device = {
 	.resource = adc_resources,
 };
 
+/*
+ * USB support
+ */
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+static struct resource ohci_resources[] = {
+	{
+		.start = IO_ADDRESS(LPC32XX_USB_BASE),
+		.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_LPC32XX_USB_HOST,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device lpc32xx_ohci_device = {
+	.name = "usb-ohci",
+	.id = -1,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+	.num_resources = ARRAY_SIZE(ohci_resources),
+	.resource = ohci_resources,
+};
+
+/*
+ * Network Support
+ */
+static struct resource net_resources[] = {
+	[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
+	[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
+	[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
+};
+
+static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
+struct platform_device lpc32xx_net_device = {
+	.name = "lpc-eth",
+	.id = 0,
+	.dev = {
+		.dma_mask = &lpc32xx_mac_dma_mask,
+		.coherent_dma_mask = 0xffffffffUL,
+	},
+	.num_resources = ARRAY_SIZE(net_resources),
+	.resource = net_resources,
+};
+
 /*
  * Returns the unique ID for the device
  */

arch/arm/mach-lpc32xx/common.h

@@ -19,6 +19,7 @@
 #ifndef __LPC32XX_COMMON_H
 #define __LPC32XX_COMMON_H
 
+#include <mach/board.h>
 #include <linux/platform_device.h>
 
 /*
@@ -31,6 +32,8 @@ extern struct platform_device lpc32xx_i2c2_device;
 extern struct platform_device lpc32xx_tsc_device;
 extern struct platform_device lpc32xx_adc_device;
 extern struct platform_device lpc32xx_rtc_device;
+extern struct platform_device lpc32xx_ohci_device;
+extern struct platform_device lpc32xx_net_device;
 
 /*
  * Other arch specific structures and functions
@@ -66,9 +69,6 @@ extern u32 clk_get_pclk_div(void);
  */
 extern void lpc32xx_get_uid(u32 devid[4]);
 
-extern void lpc32xx_watchdog_reset(void);
-extern u32 lpc32xx_return_iram_size(void);
-
 /*
  * Pointers used for sizing and copying suspend function data
  */

arch/arm/mach-lpc32xx/include/mach/board.h

@@ -0,0 +1,24 @@
+/*
+ * arm/arch/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+extern u32 lpc32xx_return_iram_size(void);
+
+#endif  /* __ASM_ARCH_BOARD_H */

arch/arm/mach-lpc32xx/include/mach/platform.h

@@ -591,42 +591,42 @@
 /*
  * Timer/counter register offsets
  */
-#define LCP32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
+#define LPC32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
-#define LCP32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
+#define LPC32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
-#define LCP32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
+#define LPC32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
-#define LCP32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
-#define LCP32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
+#define LPC32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
-#define LCP32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
+#define LPC32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
-#define LCP32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
+#define LPC32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
-#define LCP32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
+#define LPC32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
-#define LCP32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
+#define LPC32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
-#define LCP32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
+#define LPC32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
-#define LCP32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
+#define LPC32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
-#define LCP32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
+#define LPC32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
-#define LCP32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
+#define LPC32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
-#define LCP32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
+#define LPC32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
-#define LCP32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
+#define LPC32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
-#define LCP32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
+#define LPC32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
-#define LCP32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
+#define LPC32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
 
 /*
  * ir register definitions
  */
-#define LCP32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
+#define LPC32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
-#define LCP32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
+#define LPC32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
 
 /*
  * tcr register definitions
  */
-#define LCP32XX_TIMER_CNTR_TCR_EN		0x1
+#define LPC32XX_TIMER_CNTR_TCR_EN		0x1
-#define LCP32XX_TIMER_CNTR_TCR_RESET		0x2
+#define LPC32XX_TIMER_CNTR_TCR_RESET		0x2
 
 /*
  * mcr register definitions
  */
-#define LCP32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
+#define LPC32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
-#define LCP32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
+#define LPC32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
-#define LCP32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
+#define LPC32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
 
 /*
  * Standard UART register offsets
@@ -690,5 +690,8 @@
 #define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
 #define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
 #define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
 
 #endif

arch/arm/mach-lpc32xx/irq.c

@@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
 	},
+	[IRQ_LPC32XX_ETHERNET] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
+	},
 	[IRQ_LPC32XX_USB_OTG_ATX] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,

arch/arm/mach-lpc32xx/phy3250.c

@@ -37,6 +37,7 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <mach/board.h>
 #include <mach/gpio-lpc32xx.h>
 #include "common.h"
 
@@ -247,12 +248,16 @@ static struct platform_device lpc32xx_gpio_led_device = {
 };
 
 static struct platform_device *phy3250_devs[] __initdata = {
+	&lpc32xx_rtc_device,
+	&lpc32xx_tsc_device,
 	&lpc32xx_i2c0_device,
 	&lpc32xx_i2c1_device,
 	&lpc32xx_i2c2_device,
 	&lpc32xx_watchdog_device,
 	&lpc32xx_gpio_led_device,
 	&lpc32xx_adc_device,
+	&lpc32xx_ohci_device,
+	&lpc32xx_net_device,
 };
 
 static struct amba_device *amba_devs[] __initdata = {

arch/arm/mach-lpc32xx/pm.c

@@ -13,7 +13,7 @@
 /*
  * LPC32XX CPU and system power management
  *
- * The LCP32XX has three CPU modes for controlling system power: run,
+ * The LPC32XX has three CPU modes for controlling system power: run,
  * direct-run, and halt modes. When switching between halt and run modes,
  * the CPU transistions through direct-run mode. For Linux, direct-run
  * mode is not used in normal operation. Halt mode is used when the

arch/arm/mach-lpc32xx/timer.c

@@ -34,11 +34,11 @@
 static int lpc32xx_clkevt_next_event(unsigned long delta,
     struct clock_event_device *dev)
 {
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+	__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
 
 	return 0;
 }
@@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
 		 * disable the timer to wait for the first call to
 		 * set_next_event().
 		 */
-		__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
@@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &lpc32xx_clkevt;
 
 	/* Clear match */
-	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
 
 	evt->event_handler(evt);
 
@@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void)
 	clkrate = clkrate / clk_get_pclk_div();
 
 	/* Initial timer setup */
-	__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-	__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+	__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
+	__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
-		LCP32XX_TIMER_CNTR_MCR_STOP(0) |
+		LPC32XX_TIMER_CNTR_MCR_STOP(0) |
-		LCP32XX_TIMER_CNTR_MCR_RESET(0),
+		LPC32XX_TIMER_CNTR_MCR_RESET(0),
-		LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+		LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
 
 	/* Setup tick interrupt */
 	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
@@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void)
 	clockevents_register_device(&lpc32xx_clkevt);
 
 	/* Use timer1 as clock source. */
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
 
-	clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
 		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
 }