diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 93147c0c8a0e..fcbae6a5e6c1 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -12,14 +12,33 @@ its hardware characteristcs. * compatible: These have to be supplemented with "arm,primecell" as drivers are using the AMBA bus interface. Possible values include: - - "arm,coresight-etb10", "arm,primecell"; - - "arm,coresight-tpiu", "arm,primecell"; - - "arm,coresight-tmc", "arm,primecell"; - - "arm,coresight-funnel", "arm,primecell"; - - "arm,coresight-etm3x", "arm,primecell"; - - "arm,coresight-etm4x", "arm,primecell"; - - "qcom,coresight-replicator1x", "arm,primecell"; - - "arm,coresight-stm", "arm,primecell"; [1] + - Embedded Trace Buffer (version 1.0): + "arm,coresight-etb10", "arm,primecell"; + + - Trace Port Interface Unit: + "arm,coresight-tpiu", "arm,primecell"; + + - Trace Memory Controller, used for Embedded Trace Buffer(ETB), + Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) + configuration. The configuration mode (ETB, ETF, ETR) is + discovered at boot time when the device is probed. + "arm,coresight-tmc", "arm,primecell"; + + - Trace Funnel: + "arm,coresight-funnel", "arm,primecell"; + + - Embedded Trace Macrocell (version 3.x) and + Program Flow Trace Macrocell: + "arm,coresight-etm3x", "arm,primecell"; + + - Embedded Trace Macrocell (version 4.x): + "arm,coresight-etm4x", "arm,primecell"; + + - Qualcomm Configurable Replicator (version 1.x): + "qcom,coresight-replicator1x", "arm,primecell"; + + - System Trace Macrocell: + "arm,coresight-stm", "arm,primecell"; [1] * reg: physical base address and length of the register set(s) of the component. diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt index c453ab5553cd..917199f17965 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt @@ -86,10 +86,10 @@ Optional properties: firmware) - arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, - preferrably retain firmware settings) + preferably retain firmware settings) - arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, - preferrably retain firmware settings) + preferably retain firmware settings) Example: diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index a92d4f3e7044..5c70ce9c1954 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -146,10 +146,10 @@ samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) sgx,vz89x SGX Sensortech VZ89X Sensors sii,s35390a 2-wire CMOS real-time clock skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply -st-micro,24c256 i2c serial eeprom (24cxx) -stm,m41t00 Serial Access TIMEKEEPER -stm,m41t62 Serial real-time clock (RTC) with alarm -stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS +st,24c256 i2c serial eeprom (24cxx) +st,m41t00 Serial real-time clock (RTC) +st,m41t62 Serial real-time clock (RTC) with alarm +st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt index 1857f4a6b9a9..9554292dc6cb 100644 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -8,10 +8,13 @@ Sub-nodes: - regulators : Contain the regulator nodes. The DA9052/53 regulators are bound using their names as listed below: - buck0 : regulator BUCK0 - buck1 : regulator BUCK1 - buck2 : regulator BUCK2 - buck3 : regulator BUCK3 + buck1 : regulator BUCK CORE + buck2 : regulator BUCK PRO + buck3 : regulator BUCK MEM + buck4 : regulator BUCK PERI + ldo1 : regulator LDO1 + ldo2 : regulator LDO2 + ldo3 : regulator LDO3 ldo4 : regulator LDO4 ldo5 : regulator LDO5 ldo6 : regulator LDO6 @@ -19,9 +22,6 @@ Sub-nodes: ldo8 : regulator LDO8 ldo9 : regulator LDO9 ldo10 : regulator LDO10 - ldo11 : regulator LDO11 - ldo12 : regulator LDO12 - ldo13 : regulator LDO13 The bindings details of individual regulator device can be found in: Documentation/devicetree/bindings/regulator/regulator.txt @@ -36,25 +36,25 @@ i2c@63fc8000 { /* I2C1 */ reg = <0x48>; regulators { - buck0 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - }; - buck1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; }; buck2 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; }; buck3 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; }; + + buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/net/cavium-pip.txt b/Documentation/devicetree/bindings/net/cavium-pip.txt index 7dbd158810d2..e3b8fe71762b 100644 --- a/Documentation/devicetree/bindings/net/cavium-pip.txt +++ b/Documentation/devicetree/bindings/net/cavium-pip.txt @@ -37,6 +37,12 @@ Properties for PIP port which is a child the PIP interface: - phy-handle: Optional, see ethernet.txt file in the same directory. +- rx-delay: Delay value for RGMII receive clock. Optional. Disabled if 0. + Value range is 1-31, and mapping to the actual delay varies depending on HW. + +- tx-delay: Delay value for RGMII transmit clock. Optional. Disabled if 0. + Value range is 1-31, and mapping to the actual delay varies depending on HW. + Example: pip@11800a0000000 { diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 9bbbe7f87d67..a4a570fb2494 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -317,7 +317,7 @@ Each port children node must have the following mandatory properties: Note that a port labelled "dsa" will imply checking for the uplink phandle described below. -Optionnal property: +Optional property: - link : Should be a list of phandles to another switch's DSA port. This property is only used when switches are being chained/cascaded together. This port is used as outgoing port diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt index 55c2c03fc81e..df873d1f3b7c 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt @@ -35,7 +35,7 @@ PROPERTIES Definition: Specifies the index of the FMan unit. The cell-index value may be used by the SoC, to identify the - FMan unit in the SoC memory map. In the table bellow, + FMan unit in the SoC memory map. In the table below, there's a description of the cell-index use in each SoC: - P1023: @@ -247,7 +247,7 @@ PROPERTIES The cell-index value may be used by the FMan or the SoC, to identify the MAC unit in the FMan (or SoC) memory map. - In the tables bellow there's a description of the cell-index + In the tables below there's a description of the cell-index use, there are two tables, one describes the use of cell-index by the FMan, the second describes the use by the SoC: diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt index 0127be360fe8..873096be0278 100644 --- a/Documentation/devicetree/bindings/regmap/regmap.txt +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -14,7 +14,7 @@ architectures that typically run big-endian operating systems be marked that way in the devicetree. On SoCs that can be operated in both big-endian and little-endian -modes, with a single hardware switch controlling both the endianess +modes, with a single hardware switch controlling both the endianness of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS chips), "native-endian" is used to allow using the same device tree blob in both cases. diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index 182777fac9a2..d5f73b8f614f 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -28,10 +28,10 @@ Optional properties: - dma-names: Should contain "tx" for transmit and "rx" for receive channels - qcom,tx-crci: Identificator for Client Rate Control Interface to be used with TX DMA channel. Required when using DMA for transmission - with UARTDM v1.3 and bellow. + with UARTDM v1.3 and below. - qcom,rx-crci: Identificator for Client Rate Control Interface to be used with RX DMA channel. Required when using DMA for reception - with UARTDM v1.3 and bellow. + with UARTDM v1.3 and below. Note: Aliases may be defined to ensure the correct ordering of the UARTs. The alias serialN will result in the UART being assigned port N. If any diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index cf3979eb3578..59d862801e59 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -30,7 +30,7 @@ Optional subnodes: sub-nodes. This container may be omitted when the card has only one DAI link. See the examples and the - section bellow. + section below. Dai-link subnode properties and subnodes: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt index 27cfc7d7ccd7..8d6e4fd2468e 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -9,7 +9,7 @@ Required properties: one) - clocks: phandle to the source clock (usually the AHB clock) -Optionnal properties: +Optional properties: - resets: phandle to a reset controller asserting the timer Example: diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 5f8c0b47045a..a946400a86d0 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -436,12 +435,6 @@ void __init setup_arch(char **cmdline_p) static int __init customize_machine(void) { - /* - * Traverses flattened DeviceTree - registering platform devices - * (if any) complete with their resources - */ - of_platform_default_populate(NULL, NULL, NULL); - if (machine_desc->init_machine) machine_desc->init_machine(); diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 6cebaa6b8833..214bb1506b53 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -37,7 +37,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 0ff76a1bc0f1..30f44b5565b9 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -102,7 +102,7 @@ status = "okay"; rtc: m41t00@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index 87a7fc709c2d..d259f57bfd98 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -84,7 +84,7 @@ }; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 364578d707a5..905907325f3b 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -282,7 +282,7 @@ }; rtc: m41t62@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index e1a61f20873f..d79853775061 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -52,7 +52,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t82"; + compatible = "st,m41t82"; reg = <0x68>; }; }; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 85a0bcb1f7ca..da2f6c360f6b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -903,14 +902,9 @@ static int __init customize_machine(void) * machine from the device tree, if no callback is provided, * otherwise we would always need an init_machine callback. */ - of_iommu_init(); if (machine_desc->init_machine) machine_desc->init_machine(); -#ifdef CONFIG_OF - else - of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); -#endif + return 0; } arch_initcall(customize_machine); diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c index 71513df3374e..a0b1979c2c2c 100644 --- a/arch/arm/mach-artpec/board-artpec6.c +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -44,8 +43,6 @@ static void __init artpec6_init_machine(void) regmap_write(regmap, ARTPEC6_DMACFG_REGNUM, ARTPEC6_DMACFG_UARTS_BURST); }; - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 63b4fa25b48a..d068ec3cd1f6 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -30,7 +30,7 @@ static void __init at91rm9200_dt_device_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); at91rm9200_pm_init(); } diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index cada2a6412b3..ba28e9cc584d 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -61,7 +61,7 @@ static void __init at91sam9_common_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); } static void __init at91sam9_dt_device_init(void) diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 922b85f07cd2..b272c45b400f 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -68,7 +68,7 @@ static void __init sama5_dt_device_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); sama5_pm_init(); } diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index 82ad5687771f..0d7034c57334 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -12,7 +12,6 @@ */ #include -#include #include #include @@ -60,7 +59,6 @@ static void bcm21664_restart(enum reboot_mode mode, const char *cmd) static void __init bcm21664_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 2e367bd7c600..b81bb386951d 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -13,7 +13,6 @@ #include #include -#include #include @@ -58,7 +57,6 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) static void __init bcm281xx_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 834d67684e20..0c1edfc98696 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -23,16 +22,7 @@ static void __init bcm2835_init(void) { - int ret; - bcm2835_init_clocks(); - - ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, - NULL); - if (ret) { - pr_err("of_platform_populate failed: %d\n", ret); - BUG(); - } } static const char * const bcm2835_compat[] = { diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 9b1dc223d8d3..03da3813f1ab 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -395,8 +395,7 @@ static void __init cns3xxx_init(void) pm_power_off = cns3xxx_power_off; - of_platform_populate(NULL, of_default_bus_match_table, - cns3xxx_auxdata, NULL); + of_platform_default_populate(NULL, cns3xxx_auxdata, NULL); } static const char *const cns3xxx_dt_compat[] __initconst = { diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 52ccf247e079..dea410adee7e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -217,8 +216,6 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *const exynos_dt_compat[] __initconst = { diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 6050a14faee6..07f60986dc2c 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -163,8 +162,6 @@ static void __init highbank_init(void) pl320_ipc_register_notifier(&hb_keys_nb); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - if (psci_ops.cpu_suspend) platform_device_register(&highbank_cpuidle_device); } diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index 10a82a4f1e58..ec64de611d90 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -52,8 +52,6 @@ static void __init imx51_dt_init(void) { imx51_ipu_mipi_setup(); imx_src_init(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void __init imx51_init_late(void) diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 18b5c5c136db..68aec23be016 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -32,8 +32,6 @@ static void __init imx53_dt_init(void) { imx_src_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - imx_aips_allow_unprivileged_access("fsl,imx53-aipstz"); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index cb27d566d5ab..e3940707eeb8 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -278,7 +278,7 @@ static void __init imx6q_init_machine(void) imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 300326373166..37ae87d6e0e9 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -52,7 +52,7 @@ static void __init imx6sl_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx6sl_fec_init(); imx_anatop_init(); diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 6a0b0614de29..107cfc15282b 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -72,7 +72,7 @@ static void __init imx6sx_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx6sx_enet_init(); imx_anatop_init(); diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index b56de4b8cdf2..5d9bfab279dd 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -64,7 +64,6 @@ static void __init imx6ul_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6ul_enet_init(); imx_anatop_init(); imx6ul_pm_init(); diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index b450f525a670..f388e6bd46ec 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -93,7 +93,6 @@ static void __init imx7d_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx_anatop_init(); imx7d_enet_init(); } diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2b118f20c62c..c7bb83205f5b 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -240,8 +240,7 @@ static void __init ap_init_of(void) if (!ebi_base) return; - of_platform_populate(NULL, of_default_bus_match_table, - ap_auxdata_lookup, NULL); + of_platform_default_populate(NULL, ap_auxdata_lookup, NULL); sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 6f6b051e81e0..825298349bf5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -231,8 +231,7 @@ static void __init intcp_init_of(void) if (!intcp_con_base) return; - of_platform_populate(NULL, of_default_bus_match_table, - intcp_auxdata_lookup, NULL); + of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL); } static const char * intcp_dt_board_compat[] = { diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index a33a296b00dc..84613abf35a3 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -60,7 +60,6 @@ static void __init keystone_init(void) bus_register_notifier(&platform_bus_type, &platform_nb); } keystone_pm_runtime_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static long long __init keystone_pv_fixup(void) diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 81265e80302d..0e4cbbe980eb 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -191,8 +191,7 @@ static void __init lpc3250_machine_init(void) LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, LPC32XX_CLKPWR_TEST_CLK_SEL); - of_platform_populate(NULL, of_default_bus_match_table, - lpc32xx_auxdata_lookup, NULL); + of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL); } static const char *const lpc32xx_dt_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 1648edd515a2..ccca95173e17 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -144,8 +143,6 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const armada_370_xp_dt_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 1aebb82e3d7b..d076c5771adc 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -26,7 +25,6 @@ static void __init dove_init(void) #endif BUG_ON(mvebu_mbus_dt_init(false)); dove_init_pmu(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const dove_dt_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index f9d8e1ea7183..8f459ee34e6f 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -179,7 +179,7 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); + of_platform_default_populate(NULL, auxdata, NULL); } static const char * const kirkwood_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index f1ea4700efcf..0b7fe74ff46d 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -498,8 +498,7 @@ static void __init mxs_machine_init(void) else if (of_machine_is_compatible("msr,m28cu3")) m28cu3_init(); - of_platform_populate(NULL, of_default_bus_match_table, - NULL, parent); + of_platform_default_populate(NULL, NULL, parent); mxs_restart_init(); diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 34c2a1b32e7d..f0808fcc5acc 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -57,8 +57,7 @@ static struct of_dev_auxdata nspire_auxdata[] __initdata = { static void __init nspire_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - nspire_auxdata, NULL); + of_platform_default_populate(NULL, nspire_auxdata, NULL); } static void nspire_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 6f4c2c4ae2a5..3d36f1d95196 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -63,8 +63,7 @@ static void __init orion5x_dt_init(void) if (of_machine_is_compatible("maxtor,shared-storage-2")) mss2_init(); - of_platform_populate(NULL, of_default_bus_match_table, - orion5x_auxdata_lookup, NULL); + of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL); } static const char *orion5x_dt_compat[] = { diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index ec79fea82704..4e3d6d5c82cd 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -54,7 +53,6 @@ static void __init picoxcell_map_io(void) static void __init picoxcell_init_machine(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); picoxcell_setup_restart(); } diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index beb71da5d9c8..a7ab9ec141f8 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -73,7 +73,6 @@ static void __init rockchip_timer_init(void) static void __init rockchip_dt_init(void) { rockchip_suspend_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const rockchip_board_dt_compat[] = { diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 5f028ff84cfe..c83c076578dd 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -17,7 +17,6 @@ #include #include -#include #include #include @@ -35,7 +34,6 @@ static void __init s3c2416_dt_map_io(void) static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c index bbf74edd3dd9..5bf9afae752d 100644 --- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -8,8 +8,6 @@ * published by the Free Software Foundation. */ -#include - #include #include #include @@ -48,7 +46,6 @@ static void __init s3c64xx_dt_map_io(void) static void __init s3c64xx_dt_init_machine(void) { samsung_wdt_reset_of_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index db6dbfbaf9f1..3849eef0d3a7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -77,8 +76,6 @@ static void __init r8a7740_init_irq_of(void) static void __init r8a7740_generic_init(void) { r8a7740_meram_workaround(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *const r8a7740_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 99a2004cac76..a25ff188e403 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -55,7 +54,6 @@ static void __init sh73a0_generic_init(void) /* Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *const sh73a0_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index cd5d375d91f0..a7d4f136836f 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -14,7 +14,6 @@ #define pr_fmt(fmt) "SPEAr1310: " fmt #include -#include #include #include #include @@ -27,7 +26,6 @@ static void __init spear1310_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 94594d5a446c..a212af90c0bc 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -19,7 +19,6 @@ static void __init spear1340_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c index 5b32edda2276..325b89579be1 100644 --- a/arch/arm/mach-spear/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -194,8 +194,7 @@ static void __init spear300_dt_init(void) pl080_plat_data.slave_channels = spear300_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear300_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL); } static const char * const spear300_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c index 86a44ac7ff67..59e173dc85cf 100644 --- a/arch/arm/mach-spear/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -236,8 +236,7 @@ static void __init spear310_dt_init(void) pl080_plat_data.slave_channels = spear310_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear310_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL); } static const char * const spear310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index d45d751926c5..0958f68a21e2 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -240,8 +240,7 @@ static void __init spear320_dt_init(void) pl080_plat_data.slave_channels = spear320_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear320_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL); } static const char * const spear320_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c index da26fa5b68d7..ccf3573b831c 100644 --- a/arch/arm/mach-spear/spear6xx.c +++ b/arch/arm/mach-spear/spear6xx.c @@ -411,8 +411,7 @@ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { static void __init spear600_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear6xx_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL); } static const char *spear600_dt_board_compat[] = { diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 2378fa560a21..6745a657d261 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -115,7 +115,7 @@ static void __init tegra_dt_init(void) * devices */ out: - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); } static void __init paz00_init(void) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 546338bbacf8..a4910ea6811a 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -391,8 +391,7 @@ static void __init u300_init_machine_dt(void) pinctrl_register_mappings(u300_pinmux_map, ARRAY_SIZE(u300_pinmux_map)); - of_platform_populate(NULL, of_default_bus_match_table, - u300_auxdata_lookup, NULL); + of_platform_default_populate(NULL, u300_auxdata_lookup, NULL); /* Enable SEMI self refresh */ val = readw(syscon_base + U300_SYSCON_SMCR) | diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index d643b9210dbd..3c8d39c12909 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -344,8 +344,7 @@ static void __init versatile_dt_init(void) versatile_dt_pci_init(); - of_platform_populate(NULL, of_default_bus_match_table, - versatile_auxdata_lookup, NULL); + of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL); } static const char *const versatile_dt_match[] __initconst = { diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 3bc0dc9a4d69..773c04fdb746 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -30,7 +30,6 @@ #include #include #include -#include #define LEGACY_GPIO_BASE 0xD8110000 #define LEGACY_PMC_BASE 0xD8130000 @@ -158,8 +157,6 @@ static void __init vt8500_init(void) pm_power_off = &vt8500_power_off; else pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const vt8500_dt_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index da876d28ccbc..d12002cd63bc 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -141,7 +141,7 @@ out: * Finished with the static registrations now; fill in the missing * devices */ - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); platform_device_register(&zynq_cpuidle_device); } diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 2981f1bdd073..536dce22fe76 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -39,9 +39,7 @@ #include #include #include -#include #include -#include #include #include @@ -303,19 +301,6 @@ void __init setup_arch(char **cmdline_p) } } -static int __init arm64_device_init(void) -{ - if (of_have_populated_dt()) { - of_iommu_init(); - of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); - } else if (acpi_disabled) { - pr_crit("Device tree not populated\n"); - } - return 0; -} -arch_initcall_sync(arm64_device_init); - static int __init topology_init(void) { int i; diff --git a/arch/c6x/platforms/Makefile b/arch/c6x/platforms/Makefile index 9a95b9bca8d0..5f7d93468b6e 100644 --- a/arch/c6x/platforms/Makefile +++ b/arch/c6x/platforms/Makefile @@ -4,7 +4,7 @@ # Copyright 2010, 2011 Texas Instruments Incorporated # -obj-y = platform.o cache.o megamod-pic.o pll.o plldata.o timer64.o +obj-y = cache.o megamod-pic.o pll.o plldata.o timer64.o obj-y += dscr.o # SoC objects diff --git a/arch/c6x/platforms/platform.c b/arch/c6x/platforms/platform.c deleted file mode 100644 index 26c1a355d600..000000000000 --- a/arch/c6x/platforms/platform.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2011 Texas Instruments Incorporated - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include - -static int __init c6x_device_probe(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -core_initcall(c6x_device_probe); diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index bb12aa93201d..4b4853d914e2 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -212,10 +211,3 @@ static int __init topology_init(void) } subsys_initcall(topology_init); - -static int __init cris_of_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -core_initcall(cris_of_init); diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c index 31cf53d0eba2..1166f1fbfd63 100644 --- a/arch/metag/kernel/setup.c +++ b/arch/metag/kernel/setup.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -414,9 +413,7 @@ static int __init customize_machine(void) /* customizes platform devices, or adds new ones */ if (machine_desc->init_machine) machine_desc->init_machine(); - else - of_platform_populate(NULL, of_default_bus_match_table, NULL, - NULL); + return 0; } arch_initcall(customize_machine); diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 7adab180e0ca..3a0019deb7f7 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -285,7 +284,6 @@ void __init plat_time_init(void) static int __init ath79_setup(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); if (mips_machtype == ATH79_MACH_GENERIC_OF) return 0; diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index 510fc0d962f2..0914ef775b5f 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include @@ -74,13 +73,6 @@ void __init device_tree_init(void) unflatten_and_copy_device_tree(); } -static int __init populate_machine(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -arch_initcall(populate_machine); - const char *get_system_type(void) { if (config_enabled(CONFIG_MACH_JZ4780)) diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c index 9f2f9b2b23ce..edfcaf06680d 100644 --- a/arch/mips/mti-sead3/sead3-setup.c +++ b/arch/mips/mti-sead3/sead3-setup.c @@ -8,7 +8,6 @@ */ #include #include -#include #include #include @@ -107,10 +106,3 @@ void __init device_tree_init(void) unflatten_and_copy_device_tree(); } - -static int __init customize_machine(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -arch_initcall(customize_machine); diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c index 775ff90a9962..77ecf32ef3dc 100644 --- a/arch/mips/pic32/pic32mzda/init.c +++ b/arch/mips/pic32/pic32mzda/init.c @@ -147,8 +147,7 @@ static int __init plat_of_setup(void) panic("Device tree not present"); pic32_of_prepare_platform_data(pic32_auxdata_lookup); - if (of_platform_populate(NULL, of_default_bus_match_table, - pic32_auxdata_lookup, NULL)) + if (of_platform_default_populate(NULL, pic32_auxdata_lookup, NULL)) panic("Failed to populate DT"); return 0; diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c index ab79828230ab..c50a670e60d2 100644 --- a/arch/mips/pistachio/init.c +++ b/arch/mips/pistachio/init.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -159,15 +158,3 @@ void __init device_tree_init(void) unflatten_and_copy_device_tree(); } - -static int __init plat_of_setup(void) -{ - if (!of_have_populated_dt()) - panic("Device tree not present"); - - if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL)) - panic("Failed to populate DT"); - - return 0; -} -arch_initcall(plat_of_setup); diff --git a/arch/mips/xilfpga/init.c b/arch/mips/xilfpga/init.c index ce2aee2169ac..602e384a26a2 100644 --- a/arch/mips/xilfpga/init.c +++ b/arch/mips/xilfpga/init.c @@ -10,7 +10,6 @@ */ #include -#include #include @@ -43,15 +42,3 @@ void __init device_tree_init(void) unflatten_and_copy_device_tree(); } - -static int __init plat_of_setup(void) -{ - if (!of_have_populated_dt()) - panic("Device tree not present"); - - if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL)) - panic("Failed to populate DT"); - - return 0; -} -arch_initcall(plat_of_setup); diff --git a/arch/nios2/platform/platform.c b/arch/nios2/platform/platform.c index d478773f758a..2a35154ca153 100644 --- a/arch/nios2/platform/platform.c +++ b/arch/nios2/platform/platform.c @@ -9,7 +9,6 @@ */ #include -#include #include #include #include @@ -39,8 +38,7 @@ static int __init nios2_soc_device_init(void) } } - return of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); + return 0; } device_initcall(nios2_soc_device_init); diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts index a1b883730b31..27fcabc2f857 100644 --- a/arch/powerpc/boot/dts/ac14xx.dts +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -231,7 +231,7 @@ }; rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts index f92ecfed3d2f..e61d5dc598c1 100644 --- a/arch/powerpc/boot/dts/akebono.dts +++ b/arch/powerpc/boot/dts/akebono.dts @@ -224,7 +224,7 @@ #address-cells = <1>; #size-cells = <0>; rtc@68 { - compatible = "stm,m41t80", "m41st85"; + compatible = "st,m41t80", "m41st85"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 7daaca324c01..b0b26d8d68a2 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -279,7 +279,7 @@ #address-cells = <1>; #size-cells = <0>; rtc@68 { - compatible = "stm,m41t80"; + compatible = "st,m41t80"; reg = <0x68>; interrupt-parent = <&UIC0>; interrupts = <0x9 0x8>; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 549c24c4c388..0d6ac92d0f5e 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -319,7 +319,7 @@ #address-cells = <1>; #size-cells = <0>; rtc@68 { - compatible = "stm,m41t80"; + compatible = "st,m41t80"; reg = <0x68>; interrupt-parent = <&UIC2>; interrupts = <0x19 0x8>; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts index d2c8a872308e..4191e1850ea1 100644 --- a/arch/powerpc/boot/dts/currituck.dts +++ b/arch/powerpc/boot/dts/currituck.dts @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <0>; rtc@68 { - compatible = "stm,m41t80", "m41st85"; + compatible = "st,m41t80", "m41st85"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts index a95ff7d2392c..8e94448f296c 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts @@ -232,7 +232,7 @@ mode = "cpu-qe"; serial-flash@0 { - compatible = "stm,m25p40"; + compatible = "st,m25p40"; reg = <0>; spi-max-frequency = <25000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts index d505d7c51903..29e8af1e3711 100644 --- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -57,7 +57,7 @@ clock-frequency = <12288000>; }; rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; adt7461@4c{ diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index 2000060386d7..a7a802f4ffdd 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -287,7 +287,7 @@ #address-cells = <1>; #size-cells = <0>; rtc@68 { - compatible = "stm,m41t80"; + compatible = "st,m41t80"; reg = <0x68>; interrupt-parent = <&UIC2>; interrupts = <0x19 0x8>; diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts index abcd0caeccae..9c94fd737f7c 100644 --- a/arch/powerpc/boot/dts/icon.dts +++ b/arch/powerpc/boot/dts/icon.dts @@ -256,7 +256,7 @@ #size-cells = <0>; rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c228a0a232a6..75888ce2c792 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -99,7 +99,7 @@ }; rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index cf8542401a3c..90aed3ac2f69 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -92,7 +92,7 @@ dfsrr; eeprom: at24@50 { - compatible = "st-micro,24c256"; + compatible = "st,24c256"; reg = <0x50>; }; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index daeacbdcf8b4..47c5fc64e433 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -416,7 +416,7 @@ gpios = <&qe_pio_e 18 0>; flash { - compatible = "stm,nand512-a"; + compatible = "st,nand512-a"; }; }; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts index 871c16d1ad5e..0cec7244abe7 100644 --- a/arch/powerpc/boot/dts/pdm360ng.dts +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -103,7 +103,7 @@ }; rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts index f0663be10421..088361cf4636 100644 --- a/arch/powerpc/boot/dts/sam440ep.dts +++ b/arch/powerpc/boot/dts/sam440ep.dts @@ -196,7 +196,7 @@ interrupt-parent = <&UIC0>; interrupts = <2 4>; rtc@68 { - compatible = "stm,m41t80"; + compatible = "st,m41t80"; reg = <0x68>; }; }; diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index c409cbafb126..1f2952dce77d 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -238,7 +238,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts index 8fd7b7031357..5b10e56a1d8e 100644 --- a/arch/powerpc/boot/dts/xpedite5200.dts +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -130,7 +130,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts index 0baa8283d08c..646acfbef0dd 100644 --- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -134,7 +134,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index 04cb410da48b..7bcc94ffe53d 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -231,7 +231,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index 73f8620f1ce7..86df8bc6ebbd 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -267,7 +267,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index cd0ea2b99362..b8ade094f932 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -229,7 +229,7 @@ }; rtc@68 { - compatible = "stm,m41t00", + compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c index bf3a166a5407..911ffb9f115b 100644 --- a/arch/sh/boards/of-generic.c +++ b/arch/sh/boards/of-generic.c @@ -9,9 +9,7 @@ */ #include -#include #include -#include #include #include #include @@ -180,17 +178,3 @@ void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) void __init plat_irq_setup(void) { } - -static int __init sh_of_device_init(void) -{ - pr_info("SH generic board support: populating platform devices\n"); - if (of_have_populated_dt()) { - of_iommu_init(); - of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); - } else { - pr_crit("Device tree not populated\n"); - } - return 0; -} -arch_initcall_sync(sh_of_device_init); diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 9735691f37f1..143251ede897 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -24,8 +24,8 @@ #include #include #include +#include #include -#include #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) # include @@ -255,7 +255,6 @@ void __init early_init_devtree(void *params) static int __init xtensa_device_probe(void) { of_clk_init(NULL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index 1827fc4d15c1..4bd361d64270 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -163,9 +163,8 @@ static int __init weim_parse_dt(struct platform_device *pdev, } if (have_child) - ret = of_platform_populate(pdev->dev.of_node, - of_default_bus_match_table, - NULL, &pdev->dev); + ret = of_platform_default_populate(pdev->dev.of_node, + NULL, &pdev->dev); if (ret) dev_err(&pdev->dev, "%s fail to create devices.\n", pdev->dev.of_node->full_name); diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c index 350b7309c26d..1e6e0269edcc 100644 --- a/drivers/bus/uniphier-system-bus.c +++ b/drivers/bus/uniphier-system-bus.c @@ -257,8 +257,7 @@ static int uniphier_system_bus_probe(struct platform_device *pdev) uniphier_system_bus_set_reg(priv); /* Now, the bus is configured. Populate platform_devices below it */ - return of_platform_populate(dev->of_node, of_default_bus_match_table, - NULL, dev); + return of_platform_default_populate(dev->of_node, NULL, dev); } static const struct of_device_id uniphier_system_bus_match[] = { diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index af499aea0a1a..57f23eaaa2f9 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -174,7 +174,7 @@ err_put_node: return NULL; } -void __init of_iommu_init(void) +static int __init of_iommu_init(void) { struct device_node *np; const struct of_device_id *match, *matches = &__iommu_of_table; @@ -186,4 +186,7 @@ void __init of_iommu_init(void) pr_err("Failed to initialise IOMMU %s\n", of_node_full_name(np)); } + + return 0; } +postcore_initcall_sync(of_iommu_init); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 15508df24e5d..4721b591994f 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -2134,8 +2134,7 @@ no_timings: /* is child a common bus? */ if (of_match_node(of_default_bus_match_table, child)) /* create children and other common bus children */ - if (of_platform_populate(child, of_default_bus_match_table, - NULL, &pdev->dev)) + if (of_platform_default_populate(child, NULL, &pdev->dev)) goto err_child_fail; return 0; diff --git a/drivers/of/address.c b/drivers/of/address.c index 0a553c084a81..02b2903fe9d2 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -1,4 +1,6 @@ +#define pr_fmt(fmt) "OF: " fmt + #include #include #include @@ -24,10 +26,10 @@ static int __of_address_to_resource(struct device_node *dev, #ifdef DEBUG static void of_dump_addr(const char *s, const __be32 *addr, int na) { - printk(KERN_DEBUG "%s", s); + pr_debug("%s", s); while (na--) - printk(" %08x", be32_to_cpu(*(addr++))); - printk("\n"); + pr_cont(" %08x", be32_to_cpu(*(addr++))); + pr_cont("\n"); } #else static void of_dump_addr(const char *s, const __be32 *addr, int na) { } @@ -68,7 +70,7 @@ static u64 of_bus_default_map(__be32 *addr, const __be32 *range, s = of_read_number(range + na + pna, ns); da = of_read_number(addr, na); - pr_debug("OF: default map, cp=%llx, s=%llx, da=%llx\n", + pr_debug("default map, cp=%llx, s=%llx, da=%llx\n", (unsigned long long)cp, (unsigned long long)s, (unsigned long long)da); @@ -156,7 +158,7 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns, s = of_read_number(range + na + pna, ns); da = of_read_number(addr + 1, na - 1); - pr_debug("OF: PCI map, cp=%llx, s=%llx, da=%llx\n", + pr_debug("PCI map, cp=%llx, s=%llx, da=%llx\n", (unsigned long long)cp, (unsigned long long)s, (unsigned long long)da); @@ -381,7 +383,7 @@ static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns, s = of_read_number(range + na + pna, ns); da = of_read_number(addr + 1, na - 1); - pr_debug("OF: ISA map, cp=%llx, s=%llx, da=%llx\n", + pr_debug("ISA map, cp=%llx, s=%llx, da=%llx\n", (unsigned long long)cp, (unsigned long long)s, (unsigned long long)da); @@ -504,17 +506,17 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, */ ranges = of_get_property(parent, rprop, &rlen); if (ranges == NULL && !of_empty_ranges_quirk(parent)) { - pr_debug("OF: no ranges; cannot translate\n"); + pr_debug("no ranges; cannot translate\n"); return 1; } if (ranges == NULL || rlen == 0) { offset = of_read_number(addr, na); memset(addr, 0, pna * 4); - pr_debug("OF: empty ranges; 1:1 translation\n"); + pr_debug("empty ranges; 1:1 translation\n"); goto finish; } - pr_debug("OF: walking ranges...\n"); + pr_debug("walking ranges...\n"); /* Now walk through the ranges */ rlen /= 4; @@ -525,14 +527,14 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, break; } if (offset == OF_BAD_ADDR) { - pr_debug("OF: not found !\n"); + pr_debug("not found !\n"); return 1; } memcpy(addr, ranges + na, 4 * pna); finish: - of_dump_addr("OF: parent translation for:", addr, pna); - pr_debug("OF: with offset: %llx\n", (unsigned long long)offset); + of_dump_addr("parent translation for:", addr, pna); + pr_debug("with offset: %llx\n", (unsigned long long)offset); /* Translate it into parent bus space */ return pbus->translate(addr, offset, pna); @@ -557,7 +559,7 @@ static u64 __of_translate_address(struct device_node *dev, int na, ns, pna, pns; u64 result = OF_BAD_ADDR; - pr_debug("OF: ** translation for device %s **\n", of_node_full_name(dev)); + pr_debug("** translation for device %s **\n", of_node_full_name(dev)); /* Increase refcount at current level */ of_node_get(dev); @@ -571,14 +573,14 @@ static u64 __of_translate_address(struct device_node *dev, /* Count address cells & copy address locally */ bus->count_cells(dev, &na, &ns); if (!OF_CHECK_COUNTS(na, ns)) { - pr_debug("OF: Bad cell count for %s\n", of_node_full_name(dev)); + pr_debug("Bad cell count for %s\n", of_node_full_name(dev)); goto bail; } memcpy(addr, in_addr, na * 4); - pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + pr_debug("bus is %s (na=%d, ns=%d) on %s\n", bus->name, na, ns, of_node_full_name(parent)); - of_dump_addr("OF: translating address:", addr, na); + of_dump_addr("translating address:", addr, na); /* Translate */ for (;;) { @@ -589,7 +591,7 @@ static u64 __of_translate_address(struct device_node *dev, /* If root, we have finished */ if (parent == NULL) { - pr_debug("OF: reached root node\n"); + pr_debug("reached root node\n"); result = of_read_number(addr, na); break; } @@ -598,12 +600,12 @@ static u64 __of_translate_address(struct device_node *dev, pbus = of_match_bus(parent); pbus->count_cells(dev, &pna, &pns); if (!OF_CHECK_COUNTS(pna, pns)) { - pr_err("prom_parse: Bad cell count for %s\n", + pr_err("Bad cell count for %s\n", of_node_full_name(dev)); break; } - pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pr_debug("parent bus is %s (na=%d, ns=%d) on %s\n", pbus->name, pna, pns, of_node_full_name(parent)); /* Apply bus translation */ @@ -615,7 +617,7 @@ static u64 __of_translate_address(struct device_node *dev, ns = pns; bus = pbus; - of_dump_addr("OF: one level translation:", addr, na); + of_dump_addr("one level translation:", addr, na); } bail: of_node_put(parent); @@ -853,8 +855,7 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz } if (!ranges) { - pr_debug("%s: no dma-ranges found for node(%s)\n", - __func__, np->full_name); + pr_debug("no dma-ranges found for node(%s)\n", np->full_name); ret = -ENODEV; goto out; } @@ -871,8 +872,8 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz dmaaddr = of_read_number(ranges, naddr); *paddr = of_translate_dma_address(np, ranges); if (*paddr == OF_BAD_ADDR) { - pr_err("%s: translation of DMA address(%pad) to CPU address failed node(%s)\n", - __func__, dma_addr, np->full_name); + pr_err("translation of DMA address(%pad) to CPU address failed node(%s)\n", + dma_addr, np->full_name); ret = -EINVAL; goto out; } diff --git a/drivers/of/base.c b/drivers/of/base.c index ebf84e3b56d5..a4b608776c73 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -17,6 +17,9 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + +#define pr_fmt(fmt) "OF: " fmt + #include #include #include @@ -112,6 +115,7 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj, return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length); } +/* always return newly allocated name, caller must free after use */ static const char *safe_name(struct kobject *kobj, const char *orig_name) { const char *name = orig_name; @@ -126,9 +130,12 @@ static const char *safe_name(struct kobject *kobj, const char *orig_name) name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i); } - if (name != orig_name) - pr_warn("device-tree: Duplicate name in %s, renamed to \"%s\"\n", + if (name == orig_name) { + name = kstrdup(orig_name, GFP_KERNEL); + } else { + pr_warn("Duplicate name in %s, renamed to \"%s\"\n", kobject_name(kobj), name); + } return name; } @@ -159,6 +166,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp) int __of_attach_node_sysfs(struct device_node *np) { const char *name; + struct kobject *parent; struct property *pp; int rc; @@ -171,15 +179,16 @@ int __of_attach_node_sysfs(struct device_node *np) np->kobj.kset = of_kset; if (!np->parent) { /* Nodes without parents are new top level trees */ - rc = kobject_add(&np->kobj, NULL, "%s", - safe_name(&of_kset->kobj, "base")); + name = safe_name(&of_kset->kobj, "base"); + parent = NULL; } else { name = safe_name(&np->parent->kobj, kbasename(np->full_name)); - if (!name || !name[0]) - return -EINVAL; - - rc = kobject_add(&np->kobj, &np->parent->kobj, "%s", name); + parent = &np->parent->kobj; } + if (!name) + return -ENOMEM; + rc = kobject_add(&np->kobj, parent, "%s", name); + kfree(name); if (rc) return rc; @@ -198,7 +207,7 @@ void __init of_core_init(void) of_kset = kset_create_and_add("devicetree", NULL, firmware_kobj); if (!of_kset) { mutex_unlock(&of_mutex); - pr_err("devicetree: failed to register existing nodes\n"); + pr_err("failed to register existing nodes\n"); return; } for_each_of_allnodes(np) @@ -1815,6 +1824,12 @@ int __of_remove_property(struct device_node *np, struct property *prop) return 0; } +void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop) +{ + sysfs_remove_bin_file(&np->kobj, &prop->attr); + kfree(prop->attr.attr.name); +} + void __of_remove_property_sysfs(struct device_node *np, struct property *prop) { if (!IS_ENABLED(CONFIG_SYSFS)) @@ -1822,7 +1837,7 @@ void __of_remove_property_sysfs(struct device_node *np, struct property *prop) /* at early boot, bail here and defer setup to of_init() */ if (of_kset && of_node_is_attached(np)) - sysfs_remove_bin_file(&np->kobj, &prop->attr); + __of_sysfs_remove_bin_file(np, prop); } /** @@ -1895,7 +1910,7 @@ void __of_update_property_sysfs(struct device_node *np, struct property *newprop return; if (oldprop) - sysfs_remove_bin_file(&np->kobj, &oldprop->attr); + __of_sysfs_remove_bin_file(np, oldprop); __of_add_property_sysfs(np, newprop); } @@ -2257,8 +2272,8 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, of_node_put(node); if (!port) { - pr_err("%s(): no port node found in %s\n", - __func__, parent->full_name); + pr_err("graph: no port node found in %s\n", + parent->full_name); return NULL; } } else { diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 3033fa3250dc..888fdbc09992 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -6,6 +6,8 @@ * device tree nodes. */ +#define pr_fmt(fmt) "OF: " fmt + #include #include #include @@ -55,7 +57,7 @@ void __of_detach_node_sysfs(struct device_node *np) /* only remove properties if on sysfs */ if (of_node_is_attached(np)) { for_each_property_of_node(np, pp) - sysfs_remove_bin_file(&np->kobj, &pp->attr); + __of_sysfs_remove_bin_file(np, pp); kobject_del(&np->kobj); } @@ -96,13 +98,13 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p) switch (action) { case OF_RECONFIG_ATTACH_NODE: case OF_RECONFIG_DETACH_NODE: - pr_debug("of/notify %-15s %s\n", action_names[action], + pr_debug("notify %-15s %s\n", action_names[action], pr->dn->full_name); break; case OF_RECONFIG_ADD_PROPERTY: case OF_RECONFIG_REMOVE_PROPERTY: case OF_RECONFIG_UPDATE_PROPERTY: - pr_debug("of/notify %-15s %s:%s\n", action_names[action], + pr_debug("notify %-15s %s:%s\n", action_names[action], pr->dn->full_name, pr->prop->name); break; @@ -460,12 +462,12 @@ static void __of_changeset_entry_dump(struct of_changeset_entry *ce) case OF_RECONFIG_ADD_PROPERTY: case OF_RECONFIG_REMOVE_PROPERTY: case OF_RECONFIG_UPDATE_PROPERTY: - pr_debug("of/cset<%p> %-15s %s/%s\n", ce, action_names[ce->action], + pr_debug("cset<%p> %-15s %s/%s\n", ce, action_names[ce->action], ce->np->full_name, ce->prop->name); break; case OF_RECONFIG_ATTACH_NODE: case OF_RECONFIG_DETACH_NODE: - pr_debug("of/cset<%p> %-15s %s\n", ce, action_names[ce->action], + pr_debug("cset<%p> %-15s %s\n", ce, action_names[ce->action], ce->np->full_name); break; } @@ -531,13 +533,13 @@ static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool reve ret = of_property_notify(ce->action, ce->np, ce->prop, ce->old_prop); break; default: - pr_err("%s: invalid devicetree changeset action: %i\n", __func__, + pr_err("invalid devicetree changeset action: %i\n", (int)ce->action); return; } if (ret) - pr_err("%s: notifier error @%s\n", __func__, ce->np->full_name); + pr_err("changeset notifier error @%s\n", ce->np->full_name); } static int __of_changeset_entry_apply(struct of_changeset_entry *ce) @@ -568,8 +570,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) ret = __of_add_property(ce->np, ce->prop); if (ret) { - pr_err("%s: add_property failed @%s/%s\n", - __func__, ce->np->full_name, + pr_err("changeset: add_property failed @%s/%s\n", + ce->np->full_name, ce->prop->name); break; } @@ -577,8 +579,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) case OF_RECONFIG_REMOVE_PROPERTY: ret = __of_remove_property(ce->np, ce->prop); if (ret) { - pr_err("%s: remove_property failed @%s/%s\n", - __func__, ce->np->full_name, + pr_err("changeset: remove_property failed @%s/%s\n", + ce->np->full_name, ce->prop->name); break; } @@ -596,8 +598,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) ret = __of_update_property(ce->np, ce->prop, &old_prop); if (ret) { - pr_err("%s: update_property failed @%s/%s\n", - __func__, ce->np->full_name, + pr_err("changeset: update_property failed @%s/%s\n", + ce->np->full_name, ce->prop->name); break; } @@ -677,24 +679,24 @@ int __of_changeset_apply(struct of_changeset *ocs) int ret; /* perform the rest of the work */ - pr_debug("of_changeset: applying...\n"); + pr_debug("changeset: applying...\n"); list_for_each_entry(ce, &ocs->entries, node) { ret = __of_changeset_entry_apply(ce); if (ret) { - pr_err("%s: Error applying changeset (%d)\n", __func__, ret); + pr_err("Error applying changeset (%d)\n", ret); list_for_each_entry_continue_reverse(ce, &ocs->entries, node) __of_changeset_entry_revert(ce); return ret; } } - pr_debug("of_changeset: applied, emitting notifiers.\n"); + pr_debug("changeset: applied, emitting notifiers.\n"); /* drop the global lock while emitting notifiers */ mutex_unlock(&of_mutex); list_for_each_entry(ce, &ocs->entries, node) __of_changeset_entry_notify(ce, 0); mutex_lock(&of_mutex); - pr_debug("of_changeset: notifiers sent.\n"); + pr_debug("changeset: notifiers sent.\n"); return 0; } @@ -728,24 +730,24 @@ int __of_changeset_revert(struct of_changeset *ocs) struct of_changeset_entry *ce; int ret; - pr_debug("of_changeset: reverting...\n"); + pr_debug("changeset: reverting...\n"); list_for_each_entry_reverse(ce, &ocs->entries, node) { ret = __of_changeset_entry_revert(ce); if (ret) { - pr_err("%s: Error reverting changeset (%d)\n", __func__, ret); + pr_err("Error reverting changeset (%d)\n", ret); list_for_each_entry_continue(ce, &ocs->entries, node) __of_changeset_entry_apply(ce); return ret; } } - pr_debug("of_changeset: reverted, emitting notifiers.\n"); + pr_debug("changeset: reverted, emitting notifiers.\n"); /* drop the global lock while emitting notifiers */ mutex_unlock(&of_mutex); list_for_each_entry_reverse(ce, &ocs->entries, node) __of_changeset_entry_notify(ce, 1); mutex_lock(&of_mutex); - pr_debug("of_changeset: notifiers sent.\n"); + pr_debug("changeset: notifiers sent.\n"); return 0; } @@ -795,10 +797,9 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action, struct of_changeset_entry *ce; ce = kzalloc(sizeof(*ce), GFP_KERNEL); - if (!ce) { - pr_err("%s: Failed to allocate\n", __func__); + if (!ce) return -ENOMEM; - } + /* get a reference to the node */ ce->action = action; ce->np = of_node_get(np); diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 0e02947a8a7a..55f1b8391149 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -9,6 +9,8 @@ * version 2 as published by the Free Software Foundation. */ +#define pr_fmt(fmt) "OF: fdt:" fmt + #include #include #include @@ -182,14 +184,12 @@ static void populate_properties(const void *blob, val = fdt_getprop_by_offset(blob, cur, &pname, &sz); if (!val) { - pr_warn("%s: Cannot locate property at 0x%x\n", - __func__, cur); + pr_warn("Cannot locate property at 0x%x\n", cur); continue; } if (!pname) { - pr_warn("%s: Cannot find property name at 0x%x\n", - __func__, cur); + pr_warn("Cannot find property name at 0x%x\n", cur); continue; } @@ -439,7 +439,7 @@ static int unflatten_dt_nodes(const void *blob, } if (offset < 0 && offset != -FDT_ERR_NOTFOUND) { - pr_err("%s: Error %d processing FDT\n", __func__, offset); + pr_err("Error %d processing FDT\n", offset); return -EINVAL; } @@ -472,7 +472,8 @@ static int unflatten_dt_nodes(const void *blob, static void *__unflatten_device_tree(const void *blob, struct device_node *dad, struct device_node **mynodes, - void *(*dt_alloc)(u64 size, u64 align)) + void *(*dt_alloc)(u64 size, u64 align), + bool detached) { int size; void *mem; @@ -516,6 +517,11 @@ static void *__unflatten_device_tree(const void *blob, pr_warning("End of tree marker overwritten: %08x\n", be32_to_cpup(mem + size)); + if (detached) { + of_node_set_flag(*mynodes, OF_DETACHED); + pr_debug("unflattened tree is detached\n"); + } + pr_debug(" <- unflatten_device_tree()\n"); return mem; } @@ -548,7 +554,8 @@ void *of_fdt_unflatten_tree(const unsigned long *blob, void *mem; mutex_lock(&of_fdt_unflatten_mutex); - mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc); + mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc, + true); mutex_unlock(&of_fdt_unflatten_mutex); return mem; @@ -1237,7 +1244,7 @@ bool __init early_init_dt_scan(void *params) void __init unflatten_device_tree(void) { __unflatten_device_tree(initial_boot_params, NULL, &of_root, - early_init_dt_alloc_memory_arch); + early_init_dt_alloc_memory_arch, false); /* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */ of_alias_scan(early_init_dt_alloc_memory_arch); @@ -1294,7 +1301,7 @@ static int __init of_fdt_raw_init(void) if (of_fdt_crc32 != crc32_be(~0, initial_boot_params, fdt_totalsize(initial_boot_params))) { - pr_warn("fdt: not creating '/sys/firmware/fdt': CRC check failed\n"); + pr_warn("not creating '/sys/firmware/fdt': CRC check failed\n"); return 0; } of_fdt_raw_attr.size = fdt_totalsize(initial_boot_params); diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c index dca8f9b93745..843a542dac7d 100644 --- a/drivers/of/fdt_address.c +++ b/drivers/of/fdt_address.c @@ -12,6 +12,9 @@ * the Free Software Foundation; either version 2, or (at your option) * any later version. */ + +#define pr_fmt(fmt) "OF: fdt: " fmt + #include #include #include @@ -30,7 +33,7 @@ static void __init of_dump_addr(const char *s, const __be32 *addr, int na) pr_debug("%s", s); while(na--) pr_cont(" %08x", *(addr++)); - pr_debug("\n"); + pr_cont("\n"); } #else static void __init of_dump_addr(const char *s, const __be32 *addr, int na) { } @@ -77,7 +80,7 @@ static u64 __init fdt_bus_default_map(__be32 *addr, const __be32 *range, s = of_read_number(range + na + pna, ns); da = of_read_number(addr, na); - pr_debug("FDT: default map, cp=%llx, s=%llx, da=%llx\n", + pr_debug("default map, cp=%llx, s=%llx, da=%llx\n", cp, s, da); if (da < cp || da >= (cp + s)) @@ -123,11 +126,11 @@ static int __init fdt_translate_one(const void *blob, int parent, if (rlen == 0) { offset = of_read_number(addr, na); memset(addr, 0, pna * 4); - pr_debug("FDT: empty ranges, 1:1 translation\n"); + pr_debug("empty ranges, 1:1 translation\n"); goto finish; } - pr_debug("FDT: walking ranges...\n"); + pr_debug("walking ranges...\n"); /* Now walk through the ranges */ rlen /= 4; @@ -138,14 +141,14 @@ static int __init fdt_translate_one(const void *blob, int parent, break; } if (offset == OF_BAD_ADDR) { - pr_debug("FDT: not found !\n"); + pr_debug("not found !\n"); return 1; } memcpy(addr, ranges + na, 4 * pna); finish: - of_dump_addr("FDT: parent translation for:", addr, pna); - pr_debug("FDT: with offset: %llx\n", offset); + of_dump_addr("parent translation for:", addr, pna); + pr_debug("with offset: %llx\n", offset); /* Translate it into parent bus space */ return pbus->translate(addr, offset, pna); @@ -170,12 +173,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset) int na, ns, pna, pns; u64 result = OF_BAD_ADDR; - pr_debug("FDT: ** translation for device %s **\n", + pr_debug("** translation for device %s **\n", fdt_get_name(blob, node_offset, NULL)); reg = fdt_getprop(blob, node_offset, "reg", &len); if (!reg) { - pr_err("FDT: warning: device tree node '%s' has no address.\n", + pr_err("warning: device tree node '%s' has no address.\n", fdt_get_name(blob, node_offset, NULL)); goto bail; } @@ -189,15 +192,15 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset) /* Cound address cells & copy address locally */ bus->count_cells(blob, parent, &na, &ns); if (!OF_CHECK_COUNTS(na, ns)) { - pr_err("FDT: Bad cell count for %s\n", + pr_err("Bad cell count for %s\n", fdt_get_name(blob, node_offset, NULL)); goto bail; } memcpy(addr, reg, na * 4); - pr_debug("FDT: bus (na=%d, ns=%d) on %s\n", + pr_debug("bus (na=%d, ns=%d) on %s\n", na, ns, fdt_get_name(blob, parent, NULL)); - of_dump_addr("OF: translating address:", addr, na); + of_dump_addr("translating address:", addr, na); /* Translate */ for (;;) { @@ -207,7 +210,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset) /* If root, we have finished */ if (parent < 0) { - pr_debug("FDT: reached root node\n"); + pr_debug("reached root node\n"); result = of_read_number(addr, na); break; } @@ -216,12 +219,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset) pbus = &of_busses[0]; pbus->count_cells(blob, parent, &pna, &pns); if (!OF_CHECK_COUNTS(pna, pns)) { - pr_err("FDT: Bad cell count for %s\n", + pr_err("Bad cell count for %s\n", fdt_get_name(blob, node_offset, NULL)); break; } - pr_debug("FDT: parent bus (na=%d, ns=%d) on %s\n", + pr_debug("parent bus (na=%d, ns=%d) on %s\n", pna, pns, fdt_get_name(blob, parent, NULL)); /* Apply bus translation */ @@ -234,7 +237,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset) ns = pns; bus = pbus; - of_dump_addr("FDT: one level translation:", addr, na); + of_dump_addr("one level translation:", addr, na); } bail: return result; diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 6ec743faabe8..89a71c6074fc 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -18,6 +18,8 @@ * driver. */ +#define pr_fmt(fmt) "OF: " fmt + #include #include #include @@ -557,6 +559,8 @@ void __init of_irq_init(const struct of_device_id *matches) * its children can get processed in a subsequent pass. */ list_add_tail(&desc->list, &intc_parent_list); + + of_node_set_flag(desc->dev, OF_POPULATED); } /* Get the next pending parent that might have children */ diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c index 13f4fed38048..589b30c68e14 100644 --- a/drivers/of/of_pci.c +++ b/drivers/of/of_pci.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) "OF: PCI: " fmt + #include #include #include @@ -138,7 +140,7 @@ void of_pci_check_probe_only(void) else pci_clear_flags(PCI_PROBE_ONLY); - pr_info("PCI: PROBE_ONLY %sabled\n", val ? "en" : "dis"); + pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); } EXPORT_SYMBOL_GPL(of_pci_check_probe_only); @@ -181,7 +183,7 @@ int of_pci_get_host_bridge_resources(struct device_node *dev, if (!bus_range) return -ENOMEM; - pr_info("PCI host bridge %s ranges:\n", dev->full_name); + pr_info("host bridge %s ranges:\n", dev->full_name); err = of_pci_parse_bus_range(dev, bus_range); if (err) { diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 829469faeb23..18bbb4517e25 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -83,6 +83,9 @@ extern int __of_attach_node_sysfs(struct device_node *np); extern void __of_detach_node(struct device_node *np); extern void __of_detach_node_sysfs(struct device_node *np); +extern void __of_sysfs_remove_bin_file(struct device_node *np, + struct property *prop); + /* iterators for transactions, used for overlays */ /* forward iterator */ #define for_each_transaction_entry(_oft, _te) \ diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 06af99f64ad8..366d8c3c7989 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -13,6 +13,8 @@ * License or (at your optional) any later version of the license. */ +#define pr_fmt(fmt) "OF: reserved mem: " fmt + #include #include #include @@ -76,7 +78,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname, struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) { - pr_err("Reserved memory: not enough space all defined regions.\n"); + pr_err("not enough space all defined regions.\n"); return; } @@ -109,8 +111,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, return -EINVAL; if (len != dt_root_size_cells * sizeof(__be32)) { - pr_err("Reserved memory: invalid size property in '%s' node.\n", - uname); + pr_err("invalid size property in '%s' node.\n", uname); return -EINVAL; } size = dt_mem_next_cell(dt_root_size_cells, &prop); @@ -120,7 +121,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, prop = of_get_flat_dt_prop(node, "alignment", &len); if (prop) { if (len != dt_root_addr_cells * sizeof(__be32)) { - pr_err("Reserved memory: invalid alignment property in '%s' node.\n", + pr_err("invalid alignment property in '%s' node.\n", uname); return -EINVAL; } @@ -142,7 +143,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, if (prop) { if (len % t_len != 0) { - pr_err("Reserved memory: invalid alloc-ranges property in '%s', skipping node.\n", + pr_err("invalid alloc-ranges property in '%s', skipping node.\n", uname); return -EINVAL; } @@ -157,7 +158,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, ret = early_init_dt_alloc_reserved_memory_arch(size, align, start, end, nomap, &base); if (ret == 0) { - pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n", + pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n", uname, &base, (unsigned long)size / SZ_1M); break; @@ -169,13 +170,12 @@ static int __init __reserved_mem_alloc_size(unsigned long node, ret = early_init_dt_alloc_reserved_memory_arch(size, align, 0, 0, nomap, &base); if (ret == 0) - pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n", + pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n", uname, &base, (unsigned long)size / SZ_1M); } if (base == 0) { - pr_info("Reserved memory: failed to allocate memory for node '%s'\n", - uname); + pr_info("failed to allocate memory for node '%s'\n", uname); return -ENOMEM; } @@ -204,7 +204,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem) continue; if (initfn(rmem) == 0) { - pr_info("Reserved memory: initialized node %s, compatible id %s\n", + pr_info("initialized node %s, compatible id %s\n", rmem->name, compat); return 0; } @@ -246,7 +246,7 @@ static void __init __rmem_check_for_overlap(void) this_end = this->base + this->size; next_end = next->base + next->size; - pr_err("Reserved memory: OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n", + pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n", this->name, &this->base, &this_end, next->name, &next->base, &next_end); } diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 82250815e9a5..318dbb51e7a2 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -8,7 +8,9 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. */ -#undef DEBUG + +#define pr_fmt(fmt) "OF: overlay: " fmt + #include #include #include @@ -137,8 +139,8 @@ static int of_overlay_apply_one(struct of_overlay *ov, for_each_property_of_node(overlay, prop) { ret = of_overlay_apply_single_property(ov, target, prop); if (ret) { - pr_err("%s: Failed to apply prop @%s/%s\n", - __func__, target->full_name, prop->name); + pr_err("Failed to apply prop @%s/%s\n", + target->full_name, prop->name); return ret; } } @@ -146,9 +148,8 @@ static int of_overlay_apply_one(struct of_overlay *ov, for_each_child_of_node(overlay, child) { ret = of_overlay_apply_single_device_node(ov, target, child); if (ret != 0) { - pr_err("%s: Failed to apply single node @%s/%s\n", - __func__, target->full_name, - child->name); + pr_err("Failed to apply single node @%s/%s\n", + target->full_name, child->name); of_node_put(child); return ret; } @@ -176,8 +177,7 @@ static int of_overlay_apply(struct of_overlay *ov) err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay); if (err != 0) { - pr_err("%s: overlay failed '%s'\n", - __func__, ovinfo->target->full_name); + pr_err("apply failed '%s'\n", ovinfo->target->full_name); return err; } } @@ -208,7 +208,7 @@ static struct device_node *find_target_node(struct device_node *info_node) if (ret == 0) return of_find_node_by_path(path); - pr_err("%s: Failed to find target for node %p (%s)\n", __func__, + pr_err("Failed to find target for node %p (%s)\n", info_node, info_node->name); return NULL; @@ -355,8 +355,6 @@ int of_overlay_create(struct device_node *tree) id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL); if (id < 0) { - pr_err("%s: idr_alloc() failed for tree@%s\n", - __func__, tree->full_name); err = id; goto err_destroy_trans; } @@ -365,26 +363,21 @@ int of_overlay_create(struct device_node *tree) /* build the overlay info structures */ err = of_build_overlay_info(ov, tree); if (err) { - pr_err("%s: of_build_overlay_info() failed for tree@%s\n", - __func__, tree->full_name); + pr_err("of_build_overlay_info() failed for tree@%s\n", + tree->full_name); goto err_free_idr; } /* apply the overlay */ err = of_overlay_apply(ov); - if (err) { - pr_err("%s: of_overlay_apply() failed for tree@%s\n", - __func__, tree->full_name); + if (err) goto err_abort_trans; - } /* apply the changeset */ err = __of_changeset_apply(&ov->cset); - if (err) { - pr_err("%s: __of_changeset_apply() failed for tree@%s\n", - __func__, tree->full_name); + if (err) goto err_revert_overlay; - } + /* add to the tail of the overlay list */ list_add_tail(&ov->node, &ov_list); @@ -469,8 +462,7 @@ static int overlay_removal_is_ok(struct of_overlay *ov) list_for_each_entry(ce, &ov->cset.entries, node) { if (!overlay_is_topmost(ov, ce->np)) { - pr_err("%s: overlay #%d is not topmost\n", - __func__, ov->id); + pr_err("overlay #%d is not topmost\n", ov->id); return 0; } } @@ -496,16 +488,13 @@ int of_overlay_destroy(int id) ov = idr_find(&ov_idr, id); if (ov == NULL) { err = -ENODEV; - pr_err("%s: Could not find overlay #%d\n", - __func__, id); + pr_err("destroy: Could not find overlay #%d\n", id); goto out; } /* check whether the overlay is safe to remove */ if (!overlay_removal_is_ok(ov)) { err = -EBUSY; - pr_err("%s: removal check failed for overlay #%d\n", - __func__, id); goto out; } diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 16e8daffac06..765390e3ed8d 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -11,6 +11,9 @@ * 2 of the License, or (at your option) any later version. * */ + +#define pr_fmt(fmt) "OF: " fmt + #include #include #include @@ -31,7 +34,6 @@ const struct of_device_id of_default_bus_match_table[] = { #endif /* CONFIG_ARM_AMBA */ {} /* Empty terminated list */ }; -EXPORT_SYMBOL(of_default_bus_match_table); static int of_dev_node_match(struct device *dev, void *data) { @@ -234,11 +236,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node, return NULL; dev = amba_device_alloc(NULL, 0, 0); - if (!dev) { - pr_err("%s(): amba_device_alloc() failed for %s\n", - __func__, node->full_name); + if (!dev) goto err_clear_flag; - } /* setup generic device info */ dev->dev.of_node = of_node_get(node); @@ -261,15 +260,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node, ret = of_address_to_resource(node, 0, &dev->res); if (ret) { - pr_err("%s(): of_address_to_resource() failed (%d) for %s\n", - __func__, ret, node->full_name); + pr_err("amba: of_address_to_resource() failed (%d) for %s\n", + ret, node->full_name); goto err_free; } ret = amba_device_add(dev, &iomem_resource); if (ret) { - pr_err("%s(): amba_device_add() failed (%d) for %s\n", - __func__, ret, node->full_name); + pr_err("amba_device_add() failed (%d) for %s\n", + ret, node->full_name); goto err_free; } @@ -363,6 +362,12 @@ static int of_platform_bus_create(struct device_node *bus, return 0; } + if (of_node_check_flag(bus, OF_POPULATED_BUS)) { + pr_debug("%s() - skipping %s, already populated\n", + __func__, bus->full_name); + return 0; + } + auxdata = of_dev_lookup(lookup, bus); if (auxdata) { bus_id = auxdata->name; @@ -414,7 +419,7 @@ int of_platform_bus_probe(struct device_node *root, if (!root) return -EINVAL; - pr_debug("of_platform_bus_probe()\n"); + pr_debug("%s()\n", __func__); pr_debug(" starting at: %s\n", root->full_name); /* Do a self check of bus type, if there's a match, create children */ @@ -466,6 +471,9 @@ int of_platform_populate(struct device_node *root, if (!root) return -EINVAL; + pr_debug("%s()\n", __func__); + pr_debug(" starting at: %s\n", root->full_name); + for_each_child_of_node(root, child) { rc = of_platform_bus_create(child, matches, lookup, parent, true); if (rc) { @@ -489,6 +497,15 @@ int of_platform_default_populate(struct device_node *root, } EXPORT_SYMBOL_GPL(of_platform_default_populate); +static int __init of_platform_default_populate_init(void) +{ + if (of_have_populated_dt()) + of_platform_default_populate(NULL, NULL, NULL); + + return 0; +} +arch_initcall_sync(of_platform_default_populate_init); + static int of_platform_device_destroy(struct device *dev, void *data) { /* Do not touch devices not populated from the device tree */ diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c index d313d492f278..46325d6394cf 100644 --- a/drivers/of/resolver.c +++ b/drivers/of/resolver.c @@ -9,6 +9,8 @@ * version 2 as published by the Free Software Foundation. */ +#define pr_fmt(fmt) "OF: resolver: " fmt + #include #include #include @@ -313,6 +315,11 @@ int of_resolve_phandles(struct device_node *resolve) phandle phandle, phandle_delta; int err; + if (!resolve) + pr_err("%s: null node\n", __func__); + if (resolve && !of_node_check_flag(resolve, OF_DETACHED)) + pr_err("%s: node %s not detached\n", __func__, + resolve->full_name); /* the resolve node must exist, and be detached */ if (!resolve || !of_node_check_flag(resolve, OF_DETACHED)) return -EINVAL; @@ -369,6 +376,7 @@ int of_resolve_phandles(struct device_node *resolve) /* we need to fixup, but no root symbols... */ if (!root_sym) { + pr_err("%s: no symbols in root of device tree.\n", __func__); err = -EINVAL; goto out; } diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index f34ed9310323..53c83d66eb7e 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -771,7 +771,7 @@ static void __init of_unittest_platform_populate(void) }; np = of_find_node_by_path("/testcase-data"); - of_platform_populate(np, of_default_bus_match_table, NULL, NULL); + of_platform_default_populate(np, NULL, NULL); /* Test that a missing irq domain returns -EPROBE_DEFER */ np = of_find_node_by_path("/testcase-data/testcase-device1"); @@ -1871,8 +1871,7 @@ static void __init of_unittest_overlay(void) goto out; } - ret = of_platform_populate(bus_np, of_default_bus_match_table, - NULL, NULL); + ret = of_platform_default_populate(bus_np, NULL, NULL); if (ret != 0) { unittest(0, "could not populate bus @ \"%s\"\n", bus_path); goto out; diff --git a/include/linux/of_iommu.h b/include/linux/of_iommu.h index bd02b44902d0..e80b9c762a03 100644 --- a/include/linux/of_iommu.h +++ b/include/linux/of_iommu.h @@ -11,7 +11,6 @@ extern int of_get_dma_window(struct device_node *dn, const char *prefix, int index, unsigned long *busno, dma_addr_t *addr, size_t *size); -extern void of_iommu_init(void); extern const struct iommu_ops *of_iommu_configure(struct device *dev, struct device_node *master_np); @@ -24,7 +23,6 @@ static inline int of_get_dma_window(struct device_node *dn, const char *prefix, return -EINVAL; } -static inline void of_iommu_init(void) { } static inline const struct iommu_ops *of_iommu_configure(struct device *dev, struct device_node *master_np) { diff --git a/scripts/dtc/dt_to_config b/scripts/dtc/dt_to_config new file mode 100755 index 000000000000..9a248b505c58 --- /dev/null +++ b/scripts/dtc/dt_to_config @@ -0,0 +1,1213 @@ +#!/usr/bin/perl + +# Copyright 2016 by Frank Rowand +# Copyright 2016 by Gaurav Minocha +# +# This file is subject to the terms and conditions of the GNU General Public +# License v2. + +use strict 'refs'; +use strict subs; + +use Getopt::Long; + +$VUFX = "160610a"; + +$script_name = $0; +$script_name =~ s|^.*/||; + + +# ----- constants for print_flags() + +# Position in string $pr_flags. Range of 0..($num_pr_flags - 1). +$pr_flag_pos_mcompatible = 0; +$pr_flag_pos_driver = 1; +$pr_flag_pos_mdriver = 2; +$pr_flag_pos_config = 3; +$pr_flag_pos_mconfig = 4; +$pr_flag_pos_node_not_enabled = 5; +$pr_flag_pos_white_list = 6; +$pr_flag_pos_hard_coded = 7; +$pr_flag_pos_config_hard_coded = 8; +$pr_flag_pos_config_none = 9; +$pr_flag_pos_config_m = 10; +$pr_flag_pos_config_y = 11; +$pr_flag_pos_config_test_fail = 12; + +$num_pr_flags = $pr_flag_pos_config_test_fail + 1; + +# flags in @pr_flag_value must be unique values to allow simple regular +# expessions to work for --include_flags and --exclude_flags. +# Convention: use upper case letters for potential issues or problems. + +@pr_flag_value = ('M', 'd', 'D', 'c', 'C', 'E', 'W', 'H', 'x', 'n', 'm', 'y', 'F'); + +@pr_flag_help = ( + "multiple compatibles found for this node", + "driver found for this compatible", + "multiple drivers found for this compatible", + "kernel config found for this driver", + "multiple config options found for this driver", + "node is not enabled", + "compatible is white listed", + "matching driver and/or kernel config is hard coded", + "kernel config hard coded in Makefile", + "one or more kernel config file options is not set", + "one or more kernel config file options is set to 'm'", + "one or more kernel config file options is set to 'y'", + "one of more kernel config file options fails to have correct value" +); + + +# ----- + +%driver_config = (); # driver config array, indexed by driver source file +%driver_count = (); # driver_cnt, indexed by compatible +%compat_driver = (); # compatible driver array, indexed by compatible +%existing_config = (); # existing config symbols present in given config file + # expected values are: "y", "m", a decimal number, a + # hex number, or a string + +# ----- magic compatibles, do not have a driver +# +# Will not search for drivers for these compatibles. + +%compat_white_list = ( + 'none' => '1', + 'pci' => '1', + 'simple-bus' => '1', +); + +# Will not search for drivers for these compatibles. +# +# These compatibles have a very large number of false positives. +# +# 'hardcoded_no_driver' is a magic value. Other code knows this +# magic value. Do not use 'no_driver' here! +# +# Revisit each 'hardcoded_no_driver' to see how the compatible +# is used. Are there drivers that can be provided? + +%driver_hard_code_list = ( + 'cache' => ['hardcoded_no_driver'], + 'eeprom' => ['hardcoded_no_driver'], + 'gpio' => ['hardcoded_no_driver'], + 'gpio-keys' => ['drivers/input/keyboard/gpio_keys.c'], + 'i2c-gpio' => ['drivers/i2c/busses/i2c-gpio.c'], + 'isa' => ['arch/mips/mti-malta/malta-dt.c', + 'arch/x86/kernel/devicetree.c'], + 'led' => ['hardcoded_no_driver'], + 'm25p32' => ['hardcoded_no_driver'], + 'm25p64' => ['hardcoded_no_driver'], + 'm25p80' => ['hardcoded_no_driver'], + 'mtd-ram' => ['drivers/mtd/maps/physmap_of.c'], + 'pwm-backlight' => ['drivers/video/backlight/pwm_bl.c'], + 'spidev' => ['hardcoded_no_driver'], + 'syscon' => ['drivers/mfd/syscon.c'], + 'tlv320aic23' => ['hardcoded_no_driver'], + 'wm8731' => ['hardcoded_no_driver'], +); + +# Use these config options instead of searching makefiles + +%driver_config_hard_code_list = ( + + # this one needed even if %driver_hard_code_list is empty + 'no_driver' => ['no_config'], + 'hardcoded_no_driver' => ['no_config'], + + # drivers/usb/host/ehci-ppc-of.c + # drivers/usb/host/ehci-xilinx-of.c + # are included from: + # drivers/usb/host/ehci-hcd.c + # thus the search of Makefile for the included .c files is incorrect + # ehci-hcd.c wraps the includes with ifdef CONFIG_USB_EHCI_HCD_..._OF + # + # similar model for ohci-hcd.c (but no ohci-xilinx-of.c) + # + # similarly, uhci-hcd.c includes uhci-platform.c + + 'drivers/usb/host/ehci-ppc-of.c' => ['CONFIG_USB_EHCI_HCD', + 'CONFIG_USB_EHCI_HCD_PPC_OF'], + 'drivers/usb/host/ohci-ppc-of.c' => ['CONFIG_USB_OHCI_HCD', + 'CONFIG_USB_OHCI_HCD_PPC_OF'], + + 'drivers/usb/host/ehci-xilinx-of.c' => ['CONFIG_USB_EHCI_HCD', + 'CONFIG_USB_EHCI_HCD_XILINX'], + + 'drivers/usb/host/uhci-platform.c' => ['CONFIG_USB_UHCI_HCD', + 'CONFIG_USB_UHCI_PLATFORM'], + + # scan_makefile will find only one of these config options: + # ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),) + 'arch/arm/mach-imx/platsmp.c' => ['CONFIG_SOC_IMX6 && CONFIG_SMP', + 'CONFIG_SOC_LS1021A && CONFIG_SMP'], +); + + +# 'virt/kvm/arm/.*' are controlled by makefiles in other directories, +# using relative paths, such as 'KVM := ../../../virt/kvm'. Do not +# add complexity to find_kconfig() to deal with this. There is a long +# term intent to change the kvm related makefiles to the normal kernel +# style. After that is done, this entry can be removed from the +# black_list_driver. + +@black_list_driver = ( + # kvm no longer a problem after commit 503a62862e8f in 4.7-rc1 + # 'virt/kvm/arm/.*', +); + + +sub usage() +{ + print +" +Usage: $script_name [options] device-tree... + + device_tree is: dts_file | dtb_file | proc_device-tree + + +Valid options: + -c FILE Read kernel config options from FILE + --config FILE synonym for 'c' + --config-format config file friendly output format + --exclude-flag FLAG exclude entries with a matching flag + -h Display this message and exit + --help synonym for 'h' + --black-list-driver use driver black list + --white-list-config use config white list + --white-list-driver use driver white list + --include-flag FLAG include only entries with a matching flag + --include-suspect include only entries with an uppercase flag + --short-name do not show the path portion of the node name + --show-lists report of white and black lists + --version Display program version and exit + + + Report driver source files that match the compatibles in the device + tree file and the kernel config options that enable the driver source + files. + + This program must be run in the root directory of a Linux kernel + source tree. + + The default format is a report that is intended to be easily human + scannable. + + An alternate format can be selected by --config-format. This will + create output that can easily be edited to create a fragment that can + be appended to the existing kernel config file. Each entry consists of + multiple lines. The first line reports flags, the node path, compatible + value, driver file matching the compatible, configuration options, and + current values of the configuration options. For each configuration + option, the following lines report the current value and the value that + is required for the driver file to be included in the kernel. + + If a large number of drivers or config options is listed for a node, + and the '$pr_flag_value[$pr_flag_pos_hard_coded]' flag is set consider using --white-list-config and/or + --white-list-driver. If the white list option suppresses the correct + entry please report that as a bug. + + CAUTION: + This program uses heuristics to guess which driver(s) support each + compatible string and which config option(s) enables the driver(s). + Do not believe that the reported information is fully correct. + This program is intended to aid the process of determining the + proper kernel configuration for a device tree, but this is not + a fully automated process -- human involvement may still be + required! + + The driver match heuristic used is to search for source files + containing the compatible string enclosed in quotes. + + This program might not be able to find all drivers matching a + compatible string. + + Some makefiles are overly clever. This program was not made + complex enough to handle them. If no config option is listed + for a driver, look at the makefile for the driver source file. + Even if a config option is listed for a driver, some other + available config options may not be listed. + + FLAG values: +"; + + for ($k = 0; $k < $num_pr_flags; $k++) { + printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k]; + } + + print +" + Upper case letters indicate potential issues or problems. + + The flag: + +"; + + $k = $pr_flag_pos_hard_coded; + printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k]; + + print +" + will be set if the config or driver is in the white lists, even if + --white-list-config and --white-list-driver are not specified. + This is a hint that 1) many of these reported lines are likely to + be incorrect, and 2) using those options will reduce the number of + drivers and/or config options reported. + + --white-list-config and --white-list-driver may not be accurate if this + program is not well maintained. Use them with appropriate skepticism. + Use the --show-lists option to report the values in the list. + + Return value: + 0 if no error + 1 error processing command line + 2 unable to open or read kernel config file + 3 unable to open or process input device tree file(s) + + EXAMPLES: + + dt_to_config arch/arm/boot/dts/my_dts_file.dts + + Basic report. + + dt_to_config \\ + --config \${KBUILD_OUTPUT}/.config \\ + arch/\${ARCH}/boot/dts/my_dts_file.dts + + Full report, with config file issues noted. + + dt_to_config --include-suspect \\ + --config \${KBUILD_OUTPUT}/.config \\ + arch/\${ARCH}/boot/dts/my_dts_file.dts + + Report of node / compatible string / driver tuples that should + be further investigated. A node may have multiple compatible + strings. A compatible string may be matched by multiple drivers. + A driver may have config file issues noted. The compatible string + and/or driver may be in the white lists. + + dt_to_config --include-suspect --config-format \\ + --config ${KBUILD_OUTPUT}/.config \\ + arch/\${ARCH}/boot/dts/my_dts_file.dts + + Report of node / compatible string / driver tuples that should + be further investigated. The report can be edited to uncomment + the config options to select the desired tuple for a given node. + A node may have multiple compatible strings. A compatible string + may be matched by multiple drivers. A driver may have config file + issues noted. The compatible string and/or driver may be in the + white lists. + +"; +} + +sub set_flag() +{ + # pr_flags_ref is a reference to $pr_flags + + my $pr_flags_ref = shift; + my $pos = shift; + + substr $$pr_flags_ref, $pos, 1, $pr_flag_value[$pos]; + + return $pr_flags; +} + +sub print_flags() +{ + # return 1 if anything printed, else 0 + + # some fields of pn_arg_ref might not be used in this function, but + # extract all of them anyway. + my $pn_arg_ref = shift; + + my $compat = $pn_arg_ref->{compat}; + my $compatible_cnt = $pn_arg_ref->{compatible_cnt}; + my $config = $pn_arg_ref->{config}; + my $config_cnt = $pn_arg_ref->{config_cnt}; + my $driver = $pn_arg_ref->{driver}; + my $driver_cnt = $pn_arg_ref->{driver_cnt}; + my $full_node = $pn_arg_ref->{full_node}; + my $node = $pn_arg_ref->{node}; + my $node_enabled = $pn_arg_ref->{node_enabled}; + my $white_list = $pn_arg_ref->{white_list}; + + my $pr_flags = '-' x $num_pr_flags; + + + # ----- set flags in $pr_flags + + if ($compatible_cnt > 1) { + &set_flag(\$pr_flags, $pr_flag_pos_mcompatible); + } + + if ($config_cnt > 1) { + &set_flag(\$pr_flags, $pr_flag_pos_mconfig); + } + + if ($driver_cnt >= 1) { + &set_flag(\$pr_flags, $pr_flag_pos_driver); + } + + if ($driver_cnt > 1) { + &set_flag(\$pr_flags, $pr_flag_pos_mdriver); + } + + # These strings are the same way the linux kernel tests. + # The ePapr lists of values is slightly different. + if (!( + ($node_enabled eq "") || + ($node_enabled eq "ok") || + ($node_enabled eq "okay") + )) { + &set_flag(\$pr_flags, $pr_flag_pos_node_not_enabled); + } + + if ($white_list) { + &set_flag(\$pr_flags, $pr_flag_pos_white_list); + } + + if (exists($driver_hard_code_list{$compat}) || + (exists($driver_config_hard_code_list{$driver}) && + ($driver ne "no_driver"))) { + &set_flag(\$pr_flags, $pr_flag_pos_hard_coded); + } + + my @configs = split(' && ', $config); + for $configs (@configs) { + $not = $configs =~ /^!/; + $configs =~ s/^!//; + + if (($configs ne "no_config") && ($configs ne "no_makefile")) { + &set_flag(\$pr_flags, $pr_flag_pos_config); + } + + if (($config_cnt >= 1) && + ($configs !~ /CONFIG_/) && + (($configs ne "no_config") && ($configs ne "no_makefile"))) { + &set_flag(\$pr_flags, $pr_flag_pos_config_hard_coded); + } + + my $existing_config = $existing_config{$configs}; + if ($existing_config eq "m") { + &set_flag(\$pr_flags, $pr_flag_pos_config_m); + # Possible fail, depends on whether built in or + # module is desired. + &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail); + } elsif ($existing_config eq "y") { + &set_flag(\$pr_flags, $pr_flag_pos_config_y); + if ($not) { + &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail); + } + } elsif (($config_file) && ($configs =~ /CONFIG_/)) { + &set_flag(\$pr_flags, $pr_flag_pos_config_none); + if (!$not) { + &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail); + } + } + } + + # ----- include / exclude filters + + if ($include_flag_pattern && ($pr_flags !~ m/$include_flag_pattern/)) { + return 0; + } + + if ($exclude_flag_pattern && ($pr_flags =~ m/$exclude_flag_pattern/)) { + return 0; + } + + if ($config_format) { + print "# "; + } + print "$pr_flags : "; + + return 1; +} + + +sub print_node() +{ + # return number of lines printed + + # some fields of pn_arg_ref might not be used in this function, but + # extract all of them anyway. + my $pn_arg_ref = shift; + + my $compat = $pn_arg_ref->{compat}; + my $compatible_cnt = $pn_arg_ref->{compatible_cnt}; + my $config = $pn_arg_ref->{config}; + my $config_cnt = $pn_arg_ref->{config_cnt}; + my $driver = $pn_arg_ref->{driver}; + my $driver_cnt = $pn_arg_ref->{driver_cnt}; + my $full_node = $pn_arg_ref->{full_node}; + my $node = $pn_arg_ref->{node}; + my $node_enabled = $pn_arg_ref->{node_enabled}; + my $white_list = $pn_arg_ref->{white_list}; + + my $separator; + + if (! &print_flags($pn_arg_ref)) { + return 0; + } + + + if ($short_name) { + print "$node"; + } else { + print "$full_node"; + } + print " : $compat : $driver : $config : "; + + my @configs = split(' && ', $config); + + if ($config_file) { + for $configs (@configs) { + $configs =~ s/^!//; + my $existing_config = $existing_config{$configs}; + if (!$existing_config) { + # check for /-m/, /-y/, or /-objs/ + if ($configs !~ /CONFIG_/) { + $existing_config = "x"; + }; + }; + if ($existing_config) { + print "$separator", "$existing_config"; + $separator = ", "; + } else { + print "$separator", "n"; + $separator = ", "; + } + } + } else { + print "none"; + } + + print "\n"; + + if ($config_format) { + for $configs (@configs) { + $not = $configs =~ /^!/; + $configs =~ s/^!//; + my $existing_config = $existing_config{$configs}; + + if ($not) { + if ($configs !~ /CONFIG_/) { + print "# $configs\n"; + } elsif ($existing_config eq "m") { + print "# $configs is m\n"; + print "# $configs=n\n"; + } elsif ($existing_config eq "y") { + print "# $configs is set\n"; + print "# $configs=n\n"; + } else { + print "# $configs is not set\n"; + print "# $configs=n\n"; + } + + } else { + if ($configs !~ /CONFIG_/) { + print "# $configs\n"; + } elsif ($existing_config eq "m") { + print "# $configs is m\n"; + print "# $configs=y\n"; + } elsif ($existing_config eq "y") { + print "# $configs is set\n"; + print "# $configs=y\n"; + } else { + print "# $configs is not set\n"; + print "# $configs=y\n"; + } + } + } + } + + return 1; +} + + +sub scan_makefile +{ + my $pn_arg_ref = shift; + my $driver = shift; + + # ----- Find Kconfig symbols that enable driver + + my ($dir, $base) = $driver =~ m{(.*)/(.*).c}; + + my $makefile = $dir . "/Makefile"; + if (! -r $makefile) { + $makefile = $dir . "/Kbuild"; + } + if (! -r $makefile) { + my $config; + + $config = 'no_makefile'; + push @{ $driver_config{$driver} }, $config; + return; + } + + if (!open(MAKEFILE_FILE, "<", "$makefile")) { + return; + } + + my $line; + my @config; + my @if_config; + my @make_var; + + NEXT_LINE: + while ($next_line = ) { + my $config; + my $if_config; + my $ifdef; + my $ifeq; + my $ifndef; + my $ifneq; + my $ifdef_config; + my $ifeq_config; + my $ifndef_config; + my $ifneq_config; + + chomp($next_line); + $line = $line . $next_line; + if ($next_line =~ /\\$/) { + $line =~ s/\\$/ /; + next NEXT_LINE; + } + if ($line =~ /^\s*#/) { + $line = ""; + next NEXT_LINE; + } + + # ----- condition ... else ... endif + + if ($line =~ /^([ ]\s*|)else\b/) { + $if_config = "!" . pop @if_config; + $if_config =~ s/^!!//; + push @if_config, $if_config; + $line =~ s/^([ ]\s*|)else\b//; + } + + ($null, $ifeq_config, $ifeq_config_val ) = $line =~ /^([ ]\s*|)ifeq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/; + ($null, $ifneq_config, $ifneq_config_val) = $line =~ /^([ ]\s*|)ifneq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/; + ($null, $ifdef_config) = $line =~ /^([ ]\s*|)ifdef\b.*\b(CONFIG_[A-Za-z0-9_]*)/; + ($null, $ifndef_config) = $line =~ /^([ ]\s*|)ifndef\b.*\b(CONFIG_[A-Za-z0-9_]*)/; + + ($null, $ifeq) = $line =~ /^([ ]\s*|)ifeq\b\s*(.*)/; + ($null, $ifneq) = $line =~ /^([ ]\s*|)ifneq\b\s*(.*)/; + ($null, $ifdef) = $line =~ /^([ ]\s*|)ifdef\b\s*(.*)/; + ($null, $ifndef) = $line =~ /^([ ]\s*|)ifndef\b\s*(.*)/; + + # Order of tests is important. Prefer "CONFIG_*" regex match over + # less specific regex match. + if ($ifdef_config) { + $if_config = $ifdef_config; + } elsif ($ifeq_config) { + if ($ifeq_config_val =~ /y/) { + $if_config = $ifeq_config; + } else { + $if_config = "!" . $ifeq_config; + } + } elsif ($ifndef_config) { + $if_config = "!" . $ifndef_config; + } elsif ($ifneq_config) { + if ($ifneq_config_val =~ /y/) { + $if_config = "!" . $ifneq_config; + } else { + $if_config = $ifneq_config; + } + } elsif ($ifdef) { + $if_config = $ifdef; + } elsif ($ifeq) { + $if_config = $ifeq; + } elsif ($ifndef) { + $if_config = "!" . $ifndef; + } elsif ($ifneq) { + $if_config = "!" . $ifneq; + } else { + $if_config = ""; + } + $if_config =~ s/^!!//; + + if ($if_config) { + push @if_config, $if_config; + $line = ""; + next NEXT_LINE; + } + + if ($line =~ /^([ ]\s*|)endif\b/) { + pop @if_config; + $line = ""; + next NEXT_LINE; + } + + # ----- simple CONFIG_* = *.[co] or xxx [+:?]*= *.[co] + # Most makefiles select on *.o, but + # arch/powerpc/boot/Makefile selects on *.c + + ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$base.[co]\b/; + + # ----- match a make variable instead of *.[co] + # Recursively expanded variables are not handled. + + if (!$config) { + my $make_var; + ($make_var) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$base.[co]\b/; + if ($make_var) { + if ($make_var =~ /[a-zA-Z0-9]+-[ym]/) { + $config = $make_var; + } elsif ($make_var =~ /[a-zA-Z0-9]+-objs/) { + $config = $make_var; + } else { + push @make_var, $make_var; + } + } + } + + if (!$config) { + for $make_var (@make_var) { + ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$make_var\b/; + last if ($config); + } + } + + if (!$config) { + for $make_var (@make_var) { + ($config) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$make_var\b/; + last if ($config); + } + } + + # ----- next if no config found + + if (!$config) { + $line = ""; + next NEXT_LINE; + } + + for $if_config (@if_config) { + $config = $if_config . " && " . $config; + } + + push @{ $driver_config{$driver} }, $config; + + $line = ""; + } + + close(MAKEFILE_FILE); + +} + + +sub find_kconfig +{ + my $pn_arg_ref = shift; + my $driver = shift; + + my $lines_printed = 0; + my @configs; + + if (!@{ $driver_config{$driver} }) { + &scan_makefile($pn_arg_ref, $driver); + if (!@{ $driver_config{$driver} }) { + push @{ $driver_config{$driver} }, "no_config"; + } + } + + @configs = @{ $driver_config{$driver} }; + + $$pn_arg_ref{config_cnt} = $#configs + 1; + for my $config (@configs) { + $$pn_arg_ref{config} = $config; + $lines_printed += &print_node($pn_arg_ref); + } + + return $lines_printed; +} + + +sub handle_compatible() +{ + my $full_node = shift; + my $node = shift; + my $compatible = shift; + my $node_enabled = shift; + + my $compat; + my $lines_printed = 0; + my %pn_arg = (); + + return if (!$node or !$compatible); + + # Do not process compatible property of root node, + # it is used to match board, not to bind a driver. + return if ($node eq "/"); + + $pn_arg{full_node} = $full_node; + $pn_arg{node} = $node; + $pn_arg{node_enabled} = $node_enabled; + + my @compatibles = split('", "', $compatible); + + $compatibles[0] =~ s/^"//; + $compatibles[$#compatibles] =~ s/"$//; + + $pn_arg{compatible_cnt} = $#compatibles + 1; + + COMPAT: + for $compat (@compatibles) { + + $pn_arg{compat} = $compat; + $pn_arg{driver_cnt} = 0; + $pn_arg{white_list} = 0; + + if (exists($compat_white_list{$compat})) { + $pn_arg{white_list} = 1; + $pn_arg{driver} = "no_driver"; + $pn_arg{config_cnt} = 1; + $pn_arg{config} = "no_config"; + $lines_printed += &print_node(\%pn_arg); + next COMPAT; + } + + # ----- if compat previously seen, use cached info + + if (exists($compat_driver{$compat})) { + for my $driver (@{ $compat_driver{$compat} }) { + $pn_arg{driver} = $driver; + $pn_arg{driver_cnt} = $driver_count{$compat}; + $pn_arg{config_cnt} = $#{ $driver_config{$driver}} + 1; + + for my $config (@{ $driver_config{$driver} }) { + $pn_arg{config} = $config; + $lines_printed += &print_node(\%pn_arg); + } + + if (!@{ $driver_config{$driver} }) { + # no config cached yet + # $driver in %driver_hard_code_list + # but not %driver_config_hard_code_list + $lines_printed += &find_kconfig(\%pn_arg, $driver); + } + } + next COMPAT; + } + + + # ----- Find drivers (source files that contain compatible) + + # this will miss arch/sparc/include/asm/parport.h + # It is better to move the compatible out of the .h + # than to add *.h. to the files list, because *.h generates + # a lot of false negatives. + my $files = '"*.c"'; + my $drivers = `git grep -l '"$compat"' -- $files`; + chomp($drivers); + if ($drivers eq "") { + $pn_arg{driver} = "no_driver"; + $pn_arg{config_cnt} = 1; + $pn_arg{config} = "no_config"; + push @{ $compat_driver{$compat} }, "no_driver"; + $lines_printed += &print_node(\%pn_arg); + next COMPAT; + } + + my @drivers = split("\n", $drivers); + $driver_count{$compat} = $#drivers + 1; + $pn_arg{driver_cnt} = $#drivers + 1; + + DRIVER: + for my $driver (@drivers) { + push @{ $compat_driver{$compat} }, $driver; + $pn_arg{driver} = $driver; + + # ----- if driver previously seen, use cached info + + $pn_arg{config_cnt} = $#{ $driver_config{$driver} } + 1; + for my $config (@{ $driver_config{$driver} }) { + $pn_arg{config} = $config; + $lines_printed += &print_node(\%pn_arg); + } + if (@{ $driver_config{$driver} }) { + next DRIVER; + } + + if ($black_list_driver) { + for $black (@black_list_driver) { + next DRIVER if ($driver =~ /^$black$/); + } + } + + + # ----- Find Kconfig symbols that enable driver + + $lines_printed += &find_kconfig(\%pn_arg, $driver); + + } + } + + # White space (line) between nodes for readability. + # Each node may report several compatibles. + # For each compatible, multiple drivers may be reported. + # For each driver, multiple CONFIG_ options may be reported. + if ($lines_printed) { + print "\n"; + } +} + +sub read_dts() +{ + my $file = shift; + + my $compatible = ""; + my $line; + my $node = ""; + my $node_enabled = ""; + + if (! -r $file) { + print STDERR "file '$file' is not readable or does not exist\n"; + exit 3; + } + + if (!open(DT_FILE, "-|", "$dtx_diff $file")) { + print STDERR "\n"; + print STDERR "shell command failed:\n"; + print STDERR " $dtx_diff $file\n"; + print STDERR "\n"; + exit 3; + } + + FILE: + while ($line = ) { + chomp($line); + + if ($line =~ /{/) { + + &handle_compatible($full_node, $node, $compatible, + $node_enabled); + + while ($end_node_count-- > 0) { + pop @full_node; + }; + $end_node_count = 0; + $full_node = @full_node[-1]; + + $node = $line; + $node =~ s/^\s*(.*)\s+\{.*/$1/; + $node =~ s/.*: //; + if ($node eq '/' ) { + $full_node = '/'; + } elsif ($full_node ne '/') { + $full_node = $full_node . '/' . $node; + } else { + $full_node = '/' . $node; + } + push @full_node, $full_node; + + $compatible = ""; + $node_enabled = ""; + next FILE; + } + + if ($line =~ /}/) { + $end_node_count++; + } + + if ($line =~ /(\s+|^)status =/) { + $node_enabled = $line; + $node_enabled =~ s/^\t*//; + $node_enabled =~ s/^status = "//; + $node_enabled =~ s/";$//; + next FILE; + } + + if ($line =~ /(\s+|^)compatible =/) { + # Extract all compatible entries for this device + # White space matching here and in handle_compatible() is + # precise, because input format is the output of dtc, + # which is invoked by dtx_diff. + $compatible = $line; + $compatible =~ s/^\t*//; + $compatible =~ s/^compatible = //; + $compatible =~ s/;$//; + } + } + + &handle_compatible($full_node, $node, $compatible, $node_enabled); + + close(DT_FILE); +} + + +sub read_config_file() +{ + if (! -r $config_file) { + print STDERR "file '$config_file' is not readable or does not exist\n"; + exit 2; + } + + if (!open(CONFIG_FILE, "<", "$config_file")) { + print STDERR "open $config_file failed\n"; + exit 2; + } + + my @line; + + LINE: + while ($line = ) { + chomp($line); + next LINE if ($line =~ /^\s*#/); + next LINE if ($line =~ /^\s*$/); + @line = split /=/, $line; + $existing_config{@line[0]} = @line[1]; + } + + close(CONFIG_FILE); +} + + +sub cmd_line_err() +{ + my $msg = shift; + + print STDERR "\n"; + print STDERR " ERROR processing command line options\n"; + print STDERR " $msg\n" if ($msg ne ""); + print STDERR "\n"; + print STDERR " For help, type '$script_name --help'\n"; + print STDERR "\n"; +} + + +# ----------------------------------------------------------------------------- +# program entry point + +Getopt::Long::Configure("no_ignore_case", "bundling"); + +if (!GetOptions( + "c=s" => \$config_file, + "config=s" => \$config_file, + "config-format" => \$config_format, + "exclude-flag=s" => \@exclude_flag, + "h" => \$help, + "help" => \$help, + "black-list-driver" => \$black_list_driver, + "white-list-config" => \$white_list_config, + "white-list-driver" => \$white_list_driver, + "include-flag=s" => \@include_flag, + "include-suspect" => \$include_suspect, + "short-name" => \$short_name, + "show-lists" => \$show_lists, + "version" => \$version, + )) { + + &cmd_line_err(); + + exit 1; +} + + +my $exit_after_messages = 0; + +if ($version) { + print STDERR "\n$script_name $VUFX\n\n"; + $exit_after_messages = 1; +} + + +if ($help) { + &usage; + $exit_after_messages = 1; +} + + +if ($show_lists) { + + print "\n"; + print "These compatibles are hard coded to have no driver.\n"; + print "\n"; + for my $compat (sort keys %compat_white_list) { + print " $compat\n"; + } + + + print "\n\n"; + print "The driver for these compatibles is hard coded (white list).\n"; + print "\n"; + my $max_compat_len = 0; + for my $compat (sort keys %driver_hard_code_list) { + if (length $compat > $max_compat_len) { + $max_compat_len = length $compat; + } + } + for my $compat (sort keys %driver_hard_code_list) { + if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) { + my $first = 1; + for my $driver (@{ $driver_hard_code_list{$compat} }) { + if ($first) { + print " $compat"; + print " " x ($max_compat_len - length $compat); + $first = 0; + } else { + print " ", " " x $max_compat_len; + } + print " $driver\n"; + } + } + } + + + print "\n\n"; + print "The configuration option for these drivers is hard coded (white list).\n"; + print "\n"; + my $max_driver_len = 0; + for my $driver (sort keys %driver_config_hard_code_list) { + if (length $driver > $max_driver_len) { + $max_driver_len = length $driver; + } + } + for my $driver (sort keys %driver_config_hard_code_list) { + if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) { + my $first = 1; + for my $config (@{ $driver_config_hard_code_list{$driver} }) { + if ($first) { + print " $driver"; + print " " x ($max_driver_len - length $driver); + $first = 0; + } else { + print " ", " " x $max_driver_len; + } + print " $config\n"; + } + } + } + + + print "\n\n"; + print "These drivers are black listed.\n"; + print "\n"; + for my $driver (@black_list_driver) { + print " $driver\n"; + } + + print "\n"; + + $exit_after_messages = 1; +} + + +if ($exit_after_messages) { + exit 0; +} + + +$exclude_flag_pattern = "["; +for my $exclude_flag (@exclude_flag) { + $exclude_flag_pattern = $exclude_flag_pattern . $exclude_flag; +} +$exclude_flag_pattern = $exclude_flag_pattern . "]"; +# clean up if empty +$exclude_flag_pattern =~ s/^\[\]$//; + + +$include_flag_pattern = "["; +for my $include_flag (@include_flag) { + $include_flag_pattern = $include_flag_pattern . $include_flag; +} +$include_flag_pattern = $include_flag_pattern . "]"; +# clean up if empty +$include_flag_pattern =~ s/^\[\]$//; + + +if ($exclude_flag_pattern) { + my $found = 0; + for $pr_flag_value (@pr_flag_value) { + if ($exclude_flag_pattern =~ m/$pr_flag_value/) { + $found = 1; + } + } + if (!$found) { + &cmd_line_err("invalid value for FLAG in --exclude-flag\n"); + exit 1 + } +} + +if ($include_flag_pattern) { + my $found = 0; + for $pr_flag_value (@pr_flag_value) { + if ($include_flag_pattern =~ m/$pr_flag_value/) { + $found = 1; + } + } + if (!$found) { + &cmd_line_err("invalid value for FLAG in --include-flag\n"); + exit 1 + } +} + +if ($include_suspect) { + $include_flag_pattern =~ s/\[//; + $include_flag_pattern =~ s/\]//; + $include_flag_pattern = "[" . $include_flag_pattern . "A-Z]"; +} + +if ($exclude_flag_pattern =~ m/$include_flag_pattern/) { + &cmd_line_err("the same flag appears in both --exclude-flag and --include-flag or --include-suspect\n"); + exit 1 +} + + +# ($#ARGV < 0) is valid for --help, --version +if ($#ARGV < 0) { + &cmd_line_err("device-tree... is required"); + exit 1 +} + + +if ($config_file) { + &read_config_file(); +} + + +# avoid pushing duplicates for this value +$driver = "hardcoded_no_driver"; +for $config ( @{ $driver_config_hard_code_list{$driver} } ) { + push @{ $driver_config{$driver} }, $config; +} + +if ($white_list_driver) { + for my $compat (keys %driver_hard_code_list) { + for my $driver (@{ $driver_hard_code_list{$compat} }) { + push @{ $compat_driver{$compat} }, $driver; + if ($driver ne "hardcoded_no_driver") { + $driver_count{$compat} = scalar @{ $compat_driver{$compat} }; + } + } + } +} + +if ($white_list_config) { + for my $driver (keys %driver_config_hard_code_list) { + if ($driver ne "hardcoded_no_driver") { + for $config ( @{ $driver_config_hard_code_list{$driver} } ) { + push @{ $driver_config{$driver} }, $config; + } + } + } +} + +if (-x "scripts/dtc/dtx_diff") { + $dtx_diff = "scripts/dtc/dtx_diff"; +} else { + + print STDERR "\n"; + print STDERR "$script_name must be run from the root directory of a Linux kernel tree\n"; + print STDERR "\n"; + exit 3; +} + +for $file (@ARGV) { + &read_dts($file); +} diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff index 959ab2646d38..ec47f95991a3 100755 --- a/scripts/dtc/dtx_diff +++ b/scripts/dtc/dtx_diff @@ -266,7 +266,7 @@ DTC="${__KBUILD_OUTPUT}/scripts/dtc/dtc" if [ ! -x ${DTC} ] ; then __DTC="dtc" - if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config ; then + if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config 2>/dev/null; then make_command=' make scripts' else