hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC: driver updates for v4.2 

Some of these are for drivers/soc, where we're now putting
 SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 Some highlights:
 
 - simple-mfd: document DT bindings and misc updates
 - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
 - memory: support for Tegra132 SoC
 - memory: introduce tegra EMC driver for scaling memory frequency
 - misc. updates for ARM CCI and CCN busses
 
  Conflicts:
 	arch/arm64/boot/dts/arm/juno-motherboard.dtsi
 
  Trivial add/add conflict with our dt branch.
  Resolution: take both sides.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RRAAoJEFk3GJrT+8ZljIcQAIsqxM/o0drd90xTJ6ex9h0B
 RmqVLTDgesHmBacJ+SBsa9/ybFIM1uErByftc1dmKankEQVXW3wcH7keQnoStPT2
 zTEjadHgZ/ARYjV/oG5oohjfDZpO1kECVHL8O8RmcWxgzRB3az1IW2eD+dzrga/Y
 R7K6D8rDHMADIUmv0e0DzvQEbSUYdCx3rBND1qZznwZDP3NoivLkOG5MTraccLbQ
 ouCRoZtyNYD5Lxk+BHLBepnxAa0Ggc6IjEmiUv8fF2OYdu0OruMliT4rcAtOSmzg
 2Y7pP85h8u0CxbJDkOyc+2BELyKo7Hv97XtDNNbRYABTMXdskRIadXt4Sh4mwFtM
 nvlhB4ovbIX7noECJToEkSAgmStLSUwA3R6+DVdLbeQY4uSuXuTRhiWHMyQB6va9
 CdjJDk2RE0dZ77c5ZoUnUDtBe4cULU/n4agpYkKMf/HcpnqMUwZzP4KZbbPMBpgL
 0CVTt3YrEcjoU7g0SFHhOGPSgl4yIXKU2eHEscokyFYLrS5zRWepmUEmlSoaWn+W
 p7pJE65TvOGf2xbaWI+UBeK/3ZG7XAP8qUfhsi7NS4bV6oFCk/foqsWAuru0H7OW
 2Gk8fuF0qLgE1eFWQp8BHZ4IUeytoWbnGhhHXh8zH39SKAVncOiAGDNfuEP9CyXJ
 fZFfruYrnz2emOwj2v9m
 =02Gm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...
This commit is contained in:
Linus Torvalds 2015-06-26 11:54:29 -07:00
parent 3d9f96d850 4af34b572a
commit f5dcb68086
55 changed files with 4847 additions and 1070 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
Documentation/arm/CCN.txt
View File

@ -33,20 +33,23 @@ directory, with first 8 configurable by user and additional
Cycle counter is described by a "type" value 0xff and does
not require any other settings.
The driver also provides a "cpumask" sysfs attribute, which contains
a single CPU ID, of the processor which will be used to handle all
the CCN PMU events. It is recommended that the user space tools
request the events on this processor (if not, the perf_event->cpu value
will be overwritten anyway). In case of this processor being offlined,
the events are migrated to another one and the attribute is updated.
Example of perf tool use:
/ # perf list | grep ccn
ccn/cycles/ [Kernel PMU event]
<...>
ccn/xp_valid_flit/ [Kernel PMU event]
ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/ [Kernel PMU event]
<...>
/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
sleep 1
The driver does not support sampling, therefore "perf record" will
not work. Also notice that only single cpu is being selected
("-C 0") - this is because perf framework does not support
"non-CPU related" counters (yet?) so system-wide session ("-a")
would try (and in most cases fail) to set up the same event
per each CPU.
not work. Per-task (without "-a") perf sessions are not supported.

4
Documentation/devicetree/bindings/arm/cci.txt
View File

@ -31,8 +31,9 @@ specific to ARM.
- compatible
Usage: required
Value type: <string>
Definition: must be set to
Definition: must contain one of the following:
"arm,cci-400"
"arm,cci-500"
- reg
Usage: required
@ -99,6 +100,7 @@ specific to ARM.
"arm,cci-400-pmu,r1"
"arm,cci-400-pmu" - DEPRECATED, permitted only where OS has
secure acces to CCI registers
"arm,cci-500-pmu,r0"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed

84
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
View File

@ -1,6 +1,9 @@
NVIDIA Tegra Memory Controller device tree bindings
===================================================
memory-controller node
----------------------
Required properties:
- compatible: Should be "nvidia,tegra<chip>-mc"
- reg: Physical base address and length of the controller's registers.
@ -15,9 +18,49 @@ Required properties:
This device implements an IOMMU that complies with the generic IOMMU binding.
See ../iommu/iommu.txt for details.
Example:
--------
emc-timings subnode
-------------------
The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
register PMC_STRAPPING_OPT_A).
Required properties for "emc-timings" nodes :
- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
timing subnode
--------------
Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
Required properties for timing nodes :
- clock-frequency : Should contain the memory clock rate in Hz.
- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
specified, according to the board documentation:
MC_EMEM_ARB_CFG
MC_EMEM_ARB_OUTSTANDING_REQ
MC_EMEM_ARB_TIMING_RCD
MC_EMEM_ARB_TIMING_RP
MC_EMEM_ARB_TIMING_RC
MC_EMEM_ARB_TIMING_RAS
MC_EMEM_ARB_TIMING_FAW
MC_EMEM_ARB_TIMING_RRD
MC_EMEM_ARB_TIMING_RAP2PRE
MC_EMEM_ARB_TIMING_WAP2PRE
MC_EMEM_ARB_TIMING_R2R
MC_EMEM_ARB_TIMING_W2W
MC_EMEM_ARB_TIMING_R2W
MC_EMEM_ARB_TIMING_W2R
MC_EMEM_ARB_DA_TURNS
MC_EMEM_ARB_DA_COVERS
MC_EMEM_ARB_MISC0
MC_EMEM_ARB_MISC1
MC_EMEM_ARB_RING1_THROTTLE
Example SoC include file:
/ {
mc: memory-controller@0,70019000 {
compatible = "nvidia,tegra124-mc";
reg = <0x0 0x70019000 0x0 0x1000>;
@ -34,3 +77,40 @@ Example:
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
};
};
Example board file:
/ {
memory-controller@0,70019000 {
emc-timings-3 {
nvidia,ram-code = <3>;
timing-12750000 {
clock-frequency = <12750000>;
nvidia,emem-configuration = <
0x40040001 /* MC_EMEM_ARB_CFG */
0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
0x00000001 /* MC_EMEM_ARB_TIMING_RP */
0x00000002 /* MC_EMEM_ARB_TIMING_RC */
0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
0x06030203 /* MC_EMEM_ARB_DA_TURNS */
0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
0x77e30303 /* MC_EMEM_ARB_MISC0 */
0x70000f03 /* MC_EMEM_ARB_MISC1 */
0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
>;
};
};
};
};

374
Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt Normal file
View File

@ -0,0 +1,374 @@
NVIDIA Tegra124 SoC EMC (external memory controller)
====================================================
Required properties :
- compatible : Should be "nvidia,tegra124-emc".
- reg : physical base address and length of the controller's registers.
- nvidia,memory-controller : phandle of the MC driver.
The node should contain a "emc-timings" subnode for each supported RAM type
(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
being its RAM_CODE.
Required properties for "emc-timings" nodes :
- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
used for.
Each "emc-timings" node should contain a "timing" subnode for every supported
EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
their unit address.
Required properties for "timing" nodes :
- clock-frequency : Should contain the memory clock rate in Hz.
- The following properties contain EMC timing characterization values
(specified in the board documentation) :
- nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
- nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
- nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
- nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
- nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
- nvidia,emc-cfg : EMC_CFG
- nvidia,emc-cfg-2 : EMC_CFG_2
- nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
- nvidia,emc-mode-1 : Mode Register 1
- nvidia,emc-mode-2 : Mode Register 2
- nvidia,emc-mode-4 : Mode Register 4
- nvidia,emc-mode-reset : Mode Register 0
- nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
- nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
- nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
- nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
- nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
- nvidia,emc-configuration : EMC timing characterization data. These are the
registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
be specified, according to the board documentation:
EMC_RC
EMC_RFC
EMC_RFC_SLR
EMC_RAS
EMC_RP
EMC_R2W
EMC_W2R
EMC_R2P
EMC_W2P
EMC_RD_RCD
EMC_WR_RCD
EMC_RRD
EMC_REXT
EMC_WEXT
EMC_WDV
EMC_WDV_MASK
EMC_QUSE
EMC_QUSE_WIDTH
EMC_IBDLY
EMC_EINPUT
EMC_EINPUT_DURATION
EMC_PUTERM_EXTRA
EMC_PUTERM_WIDTH
EMC_PUTERM_ADJ
EMC_CDB_CNTL_1
EMC_CDB_CNTL_2
EMC_CDB_CNTL_3
EMC_QRST
EMC_QSAFE
EMC_RDV
EMC_RDV_MASK
EMC_REFRESH
EMC_BURST_REFRESH_NUM
EMC_PRE_REFRESH_REQ_CNT
EMC_PDEX2WR
EMC_PDEX2RD
EMC_PCHG2PDEN
EMC_ACT2PDEN
EMC_AR2PDEN
EMC_RW2PDEN
EMC_TXSR
EMC_TXSRDLL
EMC_TCKE
EMC_TCKESR
EMC_TPD
EMC_TFAW
EMC_TRPAB
EMC_TCLKSTABLE
EMC_TCLKSTOP
EMC_TREFBW
EMC_FBIO_CFG6
EMC_ODT_WRITE
EMC_ODT_READ
EMC_FBIO_CFG5
EMC_CFG_DIG_DLL
EMC_CFG_DIG_DLL_PERIOD
EMC_DLL_XFORM_DQS0
EMC_DLL_XFORM_DQS1
EMC_DLL_XFORM_DQS2
EMC_DLL_XFORM_DQS3
EMC_DLL_XFORM_DQS4
EMC_DLL_XFORM_DQS5
EMC_DLL_XFORM_DQS6
EMC_DLL_XFORM_DQS7
EMC_DLL_XFORM_DQS8
EMC_DLL_XFORM_DQS9
EMC_DLL_XFORM_DQS10
EMC_DLL_XFORM_DQS11
EMC_DLL_XFORM_DQS12
EMC_DLL_XFORM_DQS13
EMC_DLL_XFORM_DQS14
EMC_DLL_XFORM_DQS15
EMC_DLL_XFORM_QUSE0
EMC_DLL_XFORM_QUSE1
EMC_DLL_XFORM_QUSE2
EMC_DLL_XFORM_QUSE3
EMC_DLL_XFORM_QUSE4
EMC_DLL_XFORM_QUSE5
EMC_DLL_XFORM_QUSE6
EMC_DLL_XFORM_QUSE7
EMC_DLL_XFORM_ADDR0
EMC_DLL_XFORM_ADDR1
EMC_DLL_XFORM_ADDR2
EMC_DLL_XFORM_ADDR3
EMC_DLL_XFORM_ADDR4
EMC_DLL_XFORM_ADDR5
EMC_DLL_XFORM_QUSE8
EMC_DLL_XFORM_QUSE9
EMC_DLL_XFORM_QUSE10
EMC_DLL_XFORM_QUSE11
EMC_DLL_XFORM_QUSE12
EMC_DLL_XFORM_QUSE13
EMC_DLL_XFORM_QUSE14
EMC_DLL_XFORM_QUSE15
EMC_DLI_TRIM_TXDQS0
EMC_DLI_TRIM_TXDQS1
EMC_DLI_TRIM_TXDQS2
EMC_DLI_TRIM_TXDQS3
EMC_DLI_TRIM_TXDQS4
EMC_DLI_TRIM_TXDQS5
EMC_DLI_TRIM_TXDQS6
EMC_DLI_TRIM_TXDQS7
EMC_DLI_TRIM_TXDQS8
EMC_DLI_TRIM_TXDQS9
EMC_DLI_TRIM_TXDQS10
EMC_DLI_TRIM_TXDQS11
EMC_DLI_TRIM_TXDQS12
EMC_DLI_TRIM_TXDQS13
EMC_DLI_TRIM_TXDQS14
EMC_DLI_TRIM_TXDQS15
EMC_DLL_XFORM_DQ0
EMC_DLL_XFORM_DQ1
EMC_DLL_XFORM_DQ2
EMC_DLL_XFORM_DQ3
EMC_DLL_XFORM_DQ4
EMC_DLL_XFORM_DQ5
EMC_DLL_XFORM_DQ6
EMC_DLL_XFORM_DQ7
EMC_XM2CMDPADCTRL
EMC_XM2CMDPADCTRL4
EMC_XM2CMDPADCTRL5
EMC_XM2DQPADCTRL2
EMC_XM2DQPADCTRL3
EMC_XM2CLKPADCTRL
EMC_XM2CLKPADCTRL2
EMC_XM2COMPPADCTRL
EMC_XM2VTTGENPADCTRL
EMC_XM2VTTGENPADCTRL2
EMC_XM2VTTGENPADCTRL3
EMC_XM2DQSPADCTRL3
EMC_XM2DQSPADCTRL4
EMC_XM2DQSPADCTRL5
EMC_XM2DQSPADCTRL6
EMC_DSR_VTTGEN_DRV
EMC_TXDSRVTTGEN
EMC_FBIO_SPARE
EMC_ZCAL_WAIT_CNT
EMC_MRS_WAIT_CNT2
EMC_CTT
EMC_CTT_DURATION
EMC_CFG_PIPE
EMC_DYN_SELF_REF_CONTROL
EMC_QPOP
Example SoC include file:
/ {
emc@0,7001b000 {
compatible = "nvidia,tegra124-emc";
reg = <0x0 0x7001b000 0x0 0x1000>;
nvidia,memory-controller = <&mc>;
};
};
Example board file:
/ {
emc@0,7001b000 {
emc-timings-3 {
nvidia,ram-code = <3>;
timing-12750000 {
clock-frequency = <12750000>;
nvidia,emc-zcal-cnt-long = <0x00000042>;
nvidia,emc-auto-cal-interval = <0x001fffff>;
nvidia,emc-ctt-term-ctrl = <0x00000802>;
nvidia,emc-cfg = <0x73240000>;
nvidia,emc-cfg-2 = <0x000008c5>;
nvidia,emc-sel-dpd-ctrl = <0x00040128>;
nvidia,emc-bgbias-ctl0 = <0x00000008>;
nvidia,emc-auto-cal-config = <0xa1430000>;
nvidia,emc-auto-cal-config2 = <0x00000000>;
nvidia,emc-auto-cal-config3 = <0x00000000>;
nvidia,emc-mode-reset = <0x80001221>;
nvidia,emc-mode-1 = <0x80100003>;
nvidia,emc-mode-2 = <0x80200008>;
nvidia,emc-mode-4 = <0x00000000>;
nvidia,emc-configuration = <
0x00000000 /* EMC_RC */
0x00000003 /* EMC_RFC */
0x00000000 /* EMC_RFC_SLR */
0x00000000 /* EMC_RAS */
0x00000000 /* EMC_RP */
0x00000004 /* EMC_R2W */
0x0000000a /* EMC_W2R */
0x00000003 /* EMC_R2P */
0x0000000b /* EMC_W2P */
0x00000000 /* EMC_RD_RCD */
0x00000000 /* EMC_WR_RCD */
0x00000003 /* EMC_RRD */
0x00000003 /* EMC_REXT */
0x00000000 /* EMC_WEXT */
0x00000006 /* EMC_WDV */
0x00000006 /* EMC_WDV_MASK */
0x00000006 /* EMC_QUSE */
0x00000002 /* EMC_QUSE_WIDTH */
0x00000000 /* EMC_IBDLY */
0x00000005 /* EMC_EINPUT */
0x00000005 /* EMC_EINPUT_DURATION */
0x00010000 /* EMC_PUTERM_EXTRA */
0x00000003 /* EMC_PUTERM_WIDTH */
0x00000000 /* EMC_PUTERM_ADJ */
0x00000000 /* EMC_CDB_CNTL_1 */
0x00000000 /* EMC_CDB_CNTL_2 */
0x00000000 /* EMC_CDB_CNTL_3 */
0x00000004 /* EMC_QRST */
0x0000000c /* EMC_QSAFE */
0x0000000d /* EMC_RDV */
0x0000000f /* EMC_RDV_MASK */
0x00000060 /* EMC_REFRESH */
0x00000000 /* EMC_BURST_REFRESH_NUM */
0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
0x00000002 /* EMC_PDEX2WR */
0x00000002 /* EMC_PDEX2RD */
0x00000001 /* EMC_PCHG2PDEN */
0x00000000 /* EMC_ACT2PDEN */
0x00000007 /* EMC_AR2PDEN */
0x0000000f /* EMC_RW2PDEN */
0x00000005 /* EMC_TXSR */
0x00000005 /* EMC_TXSRDLL */
0x00000004 /* EMC_TCKE */
0x00000005 /* EMC_TCKESR */
0x00000004 /* EMC_TPD */
0x00000000 /* EMC_TFAW */
0x00000000 /* EMC_TRPAB */
0x00000005 /* EMC_TCLKSTABLE */
0x00000005 /* EMC_TCLKSTOP */
0x00000064 /* EMC_TREFBW */
0x00000000 /* EMC_FBIO_CFG6 */
0x00000000 /* EMC_ODT_WRITE */
0x00000000 /* EMC_ODT_READ */
0x106aa298 /* EMC_FBIO_CFG5 */
0x002c00a0 /* EMC_CFG_DIG_DLL */
0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
0x00064000 /* EMC_DLL_XFORM_DQS0 */
0x00064000 /* EMC_DLL_XFORM_DQS1 */
0x00064000 /* EMC_DLL_XFORM_DQS2 */
0x00064000 /* EMC_DLL_XFORM_DQS3 */
0x00064000 /* EMC_DLL_XFORM_DQS4 */
0x00064000 /* EMC_DLL_XFORM_DQS5 */
0x00064000 /* EMC_DLL_XFORM_DQS6 */
0x00064000 /* EMC_DLL_XFORM_DQS7 */
0x00064000 /* EMC_DLL_XFORM_DQS8 */
0x00064000 /* EMC_DLL_XFORM_DQS9 */
0x00064000 /* EMC_DLL_XFORM_DQS10 */
0x00064000 /* EMC_DLL_XFORM_DQS11 */
0x00064000 /* EMC_DLL_XFORM_DQS12 */
0x00064000 /* EMC_DLL_XFORM_DQS13 */
0x00064000 /* EMC_DLL_XFORM_DQS14 */
0x00064000 /* EMC_DLL_XFORM_DQS15 */
0x00000000 /* EMC_DLL_XFORM_QUSE0 */
0x00000000 /* EMC_DLL_XFORM_QUSE1 */
0x00000000 /* EMC_DLL_XFORM_QUSE2 */
0x00000000 /* EMC_DLL_XFORM_QUSE3 */
0x00000000 /* EMC_DLL_XFORM_QUSE4 */
0x00000000 /* EMC_DLL_XFORM_QUSE5 */
0x00000000 /* EMC_DLL_XFORM_QUSE6 */
0x00000000 /* EMC_DLL_XFORM_QUSE7 */
0x00000000 /* EMC_DLL_XFORM_ADDR0 */
0x00000000 /* EMC_DLL_XFORM_ADDR1 */
0x00000000 /* EMC_DLL_XFORM_ADDR2 */
0x00000000 /* EMC_DLL_XFORM_ADDR3 */
0x00000000 /* EMC_DLL_XFORM_ADDR4 */
0x00000000 /* EMC_DLL_XFORM_ADDR5 */
0x00000000 /* EMC_DLL_XFORM_QUSE8 */
0x00000000 /* EMC_DLL_XFORM_QUSE9 */
0x00000000 /* EMC_DLL_XFORM_QUSE10 */
0x00000000 /* EMC_DLL_XFORM_QUSE11 */
0x00000000 /* EMC_DLL_XFORM_QUSE12 */
0x00000000 /* EMC_DLL_XFORM_QUSE13 */
0x00000000 /* EMC_DLL_XFORM_QUSE14 */
0x00000000 /* EMC_DLL_XFORM_QUSE15 */
0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
0x000fc000 /* EMC_DLL_XFORM_DQ0 */
0x000fc000 /* EMC_DLL_XFORM_DQ1 */
0x000fc000 /* EMC_DLL_XFORM_DQ2 */
0x000fc000 /* EMC_DLL_XFORM_DQ3 */
0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
0x10000280 /* EMC_XM2CMDPADCTRL */
0x00000000 /* EMC_XM2CMDPADCTRL4 */
0x00111111 /* EMC_XM2CMDPADCTRL5 */
0x00000000 /* EMC_XM2DQPADCTRL2 */
0x00000000 /* EMC_XM2DQPADCTRL3 */
0x77ffc081 /* EMC_XM2CLKPADCTRL */
0x00000e0e /* EMC_XM2CLKPADCTRL2 */
0x81f1f108 /* EMC_XM2COMPPADCTRL */
0x07070004 /* EMC_XM2VTTGENPADCTRL */
0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
0x51451400 /* EMC_XM2DQSPADCTRL3 */
0x00514514 /* EMC_XM2DQSPADCTRL4 */
0x00514514 /* EMC_XM2DQSPADCTRL5 */
0x51451400 /* EMC_XM2DQSPADCTRL6 */
0x0000003f /* EMC_DSR_VTTGEN_DRV */
0x00000007 /* EMC_TXDSRVTTGEN */
0x00000000 /* EMC_FBIO_SPARE */
0x00000042 /* EMC_ZCAL_WAIT_CNT */
0x000e000e /* EMC_MRS_WAIT_CNT2 */
0x00000000 /* EMC_CTT */
0x00000003 /* EMC_CTT_DURATION */
0x0000f2f3 /* EMC_CFG_PIPE */
0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
0x0000000a /* EMC_QPOP */
>;
};
};
};
};

41
Documentation/devicetree/bindings/mfd/mfd.txt Normal file
View File

@ -0,0 +1,41 @@
Multi-Function Devices (MFD)
These devices comprise a nexus for heterogeneous hardware blocks containing
more than one non-unique yet varying hardware functionality.
A typical MFD can be:
- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
Integrated Circuit) that is manufactured in a lower technology node (rough
silicon) that handles analog drivers for things like audio amplifiers, LED
drivers, level shifters, PHY (physical interfaces to things like USB or
ethernet), regulators etc.
- A range of memory registers containing "miscellaneous system registers" also
known as a system controller "syscon" or any other memory range containing a
mix of unrelated hardware devices.
Optional properties:
- compatible : "simple-mfd" - this signifies that the operating system should
consider all subnodes of the MFD device as separate devices akin to how
"simple-bus" inidicates when to see subnodes as children for a simple
memory-mapped bus. For more complex devices, when the nexus driver has to
probe registers to figure out what child devices exist etc, this should not
be used. In the latter case the child devices will be determined by the
operating system.
Example:
foo@1000 {
compatible = "syscon", "simple-mfd";
reg = <0x01000 0x1000>;
led@08.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
label = "myled";
default-state = "on";
};
};

2
Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
View File

@ -10,3 +10,5 @@ Required properties:
The second entry gives the physical address and length of the
registers indicating the strapping options.
Optional properties:
- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).

72
Documentation/devicetree/bindings/soc/sunxi/sram.txt Normal file
View File

@ -0,0 +1,72 @@
Allwinnner SoC SRAM controllers
-----------------------------------------------------
The SRAM controller found on most Allwinner devices is represented by
a regular node for the SRAM controller itself, with sub-nodes
reprensenting the SRAM handled by the SRAM controller.
Controller Node
---------------
Required properties:
- compatible : "allwinner,sun4i-a10-sram-controller"
- reg : sram controller register offset + length
SRAM nodes
----------
Each SRAM is described using the mmio-sram bindings documented in
Documentation/devicetree/bindings/misc/sram.txt
Each SRAM will have SRAM sections that are going to be handled by the
SRAM controller as subnodes. These sections are represented following
once again the representation described in the mmio-sram binding.
The valid sections compatible are:
- allwinner,sun4i-a10-sram-a3-a4
- allwinner,sun4i-a10-sram-d
Devices using SRAM sections
---------------------------
Some devices need to request to the SRAM controller to map an SRAM for
their exclusive use.
The relationship between such a device and an SRAM section is
expressed through the allwinner,sram property, that will take a
phandle and an argument.
This valid values for this argument are:
- 0: CPU
- 1: Device
Example
-------
sram-controller@01c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_a: sram@00000000 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00000000 0xc000>;
emac_sram: sram-section@8000 {
compatible = "allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
status = "disabled";
};
};
};
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
...
allwinner,sram = <&emac_sram 1>;
};

2
arch/arm/boot/dts/arm-realview-pb1176.dts
View File

@ -114,7 +114,7 @@
ranges;
syscon: syscon@10000000 {
compatible = "arm,realview-pb1176-syscon", "syscon";
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
led@08.0 {

88
arch/arm/boot/dts/berlin2.dtsi
View File

@ -84,7 +84,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -93,7 +93,7 @@
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
clock-names = "io", "core";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -103,7 +103,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
pinctrl-0 = <&emmc_pmux>;
pinctrl-names = "default";
@ -133,13 +133,13 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>;
clocks = <&chip_clk CLKID_TWD>;
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
clocks = <&chip CLKID_GETH1>;
clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@ -162,7 +162,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
clocks = <&chip CLKID_GETH0>;
clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@ -261,7 +261,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@ -270,7 +270,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@ -279,7 +279,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -288,7 +288,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -297,7 +297,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -306,7 +306,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -315,7 +315,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -324,7 +324,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -343,7 +343,7 @@
compatible = "marvell,berlin2-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_SATA>;
clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@ -363,7 +363,7 @@
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2-sata-phy";
reg = <0xe900a0 0x200>;
clocks = <&chip CLKID_SATA>;
clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@ -379,16 +379,28 @@
};
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
#reset-cells = <2>;
compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
emmc_pmux: emmc-pmux {
groups = "G26";
function = "emmc";
chip_clk: clock {
compatible = "marvell,berlin2-clk";
#clock-cells = <1>;
clocks = <&refclk>;
clock-names = "refclk";
};
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2-soc-pinctrl";
emmc_pmux: emmc-pmux {
groups = "G26";
function = "emmc";
};
};
chip_rst: reset {
compatible = "marvell,berlin2-reset";
#reset-cells = <2>;
};
};
@ -470,22 +482,24 @@
};
sysctrl: system-controller@d000 {
compatible = "marvell,berlin2-system-ctrl";
compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
uart0_pmux: uart0-pmux {
groups = "GSM4";
function = "uart0";
};
sys_pinctrl: pin-controller {
compatible = "marvell,berlin2-system-pinctrl";
uart0_pmux: uart0-pmux {
groups = "GSM4";
function = "uart0";
};
uart1_pmux: uart1-pmux {
groups = "GSM5";
function = "uart1";
};
uart2_pmux: uart2-pmux {
groups = "GSM3";
function = "uart2";
uart1_pmux: uart1-pmux {
groups = "GSM5";
function = "uart1";
};
uart2_pmux: uart2-pmux {
groups = "GSM3";
function = "uart2";
};
};
};

66
arch/arm/boot/dts/berlin2cd.dtsi
View File

@ -81,7 +81,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -105,14 +105,14 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>;
clocks = <&chip_clk CLKID_TWD>;
};
usb_phy0: usb-phy@b74000 {
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip 0x178 23>;
resets = <&chip_rst 0x178 23>;
status = "disabled";
};
@ -120,14 +120,14 @@
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip 0x178 24>;
resets = <&chip_rst 0x178 24>;
status = "disabled";
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
clocks = <&chip CLKID_GETH1>;
clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@ -145,7 +145,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
clocks = <&chip CLKID_GETH0>;
clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@ -244,7 +244,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@ -253,7 +253,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@ -262,7 +262,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -271,7 +271,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -280,7 +280,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -289,7 +289,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -298,7 +298,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -307,7 +307,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -323,16 +323,28 @@
};
chip: chip-control@ea0000 {
compatible = "marvell,berlin2cd-chip-ctrl";
#clock-cells = <1>;
#reset-cells = <2>;
compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
uart0_pmux: uart0-pmux {
groups = "G6";
function = "uart0";
chip_clk: clock {
compatible = "marvell,berlin2-clk";
#clock-cells = <1>;
clocks = <&refclk>;
clock-names = "refclk";
};
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2cd-soc-pinctrl";
uart0_pmux: uart0-pmux {
groups = "G6";
function = "uart0";
};
};
chip_rst: reset {
compatible = "marvell,berlin2-reset";
#reset-cells = <2>;
};
};
@ -340,7 +352,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x200>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_USB0>;
clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@ -350,7 +362,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x200>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_USB1>;
clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
@ -417,8 +429,12 @@
};
sysctrl: system-controller@d000 {
compatible = "marvell,berlin2cd-system-ctrl";
compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
sys_pinctrl: pin-controller {
compatible = "marvell,berlin2cd-system-pinctrl";
};
};
sic: interrupt-controller@e000 {

124
arch/arm/boot/dts/berlin2q.dtsi
View File

@ -102,7 +102,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip CLKID_SDIO1XIN>;
clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -110,7 +110,7 @@
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
clocks = <&chip CLKID_SDIO1XIN>;
clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -119,7 +119,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
@ -140,7 +140,7 @@
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
clocks = <&chip CLKID_TWD>;
clocks = <&chip_clk CLKID_TWD>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
@ -155,7 +155,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
resets = <&chip 0x104 14>;
resets = <&chip_rst 0x104 14>;
status = "disabled";
};
@ -163,7 +163,7 @@
compatible = "chipidea,usb2";
reg = <0xa30000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_USB2>;
clocks = <&chip_clk CLKID_USB2>;
phys = <&usb_phy2>;
phy-names = "usb-phy";
status = "disabled";
@ -173,7 +173,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip 0x104 12>;
resets = <&chip_rst 0x104 12>;
status = "disabled";
};
@ -181,14 +181,14 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip 0x104 13>;
resets = <&chip_rst 0x104 13>;
status = "disabled";
};
eth0: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
clocks = <&chip CLKID_GETH0>;
clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@ -295,7 +295,7 @@
reg = <0x1400 0x100>;
interrupt-parent = <&aic>;
interrupts = <4>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
pinctrl-names = "default";
status = "disabled";
@ -308,7 +308,7 @@
reg = <0x1800 0x100>;
interrupt-parent = <&aic>;
interrupts = <5>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
pinctrl-names = "default";
status = "disabled";
@ -317,7 +317,7 @@
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
interrupts = <8>;
};
@ -325,14 +325,14 @@
timer1: timer@2c14 {
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
};
timer2: timer@2c28 {
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -340,7 +340,7 @@
timer3: timer@2c3c {
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -348,7 +348,7 @@
timer4: timer@2c50 {
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -356,7 +356,7 @@
timer5: timer@2c64 {
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -364,7 +364,7 @@
timer6: timer@2c78 {
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -372,7 +372,7 @@
timer7: timer@2c8c {
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
clocks = <&chip CLKID_CFG>;
clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@ -388,21 +388,33 @@
};
chip: chip-control@ea0000 {
compatible = "marvell,berlin2q-chip-ctrl";
#clock-cells = <1>;
#reset-cells = <2>;
compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
clocks = <&refclk>;
clock-names = "refclk";
twsi0_pmux: twsi0-pmux {
groups = "G6";
function = "twsi0";
chip_clk: clock {
compatible = "marvell,berlin2q-clk";
#clock-cells = <1>;
clocks = <&refclk>;
clock-names = "refclk";
};
twsi1_pmux: twsi1-pmux {
groups = "G7";
function = "twsi1";
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2q-soc-pinctrl";
twsi0_pmux: twsi0-pmux {
groups = "G6";
function = "twsi0";
};
twsi1_pmux: twsi1-pmux {
groups = "G7";
function = "twsi1";
};
};
chip_rst: reset {
compatible = "marvell,berlin2-reset";
#reset-cells = <2>;
};
};
@ -410,7 +422,7 @@
compatible = "marvell,berlin2q-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_SATA>;
clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@ -430,7 +442,7 @@
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2q-sata-phy";
reg = <0xe900a0 0x200>;
clocks = <&chip CLKID_SATA>;
clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@ -449,7 +461,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_USB0>;
clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@ -459,7 +471,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_USB1>;
clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
@ -554,27 +566,37 @@
};
sysctrl: pin-controller@d000 {
compatible = "marvell,berlin2q-system-ctrl";
compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
uart0_pmux: uart0-pmux {
groups = "GSM12";
function = "uart0";
sys_pinctrl: pin-controller {
compatible = "marvell,berlin2q-system-pinctrl";
uart0_pmux: uart0-pmux {
groups = "GSM12";
function = "uart0";
};
uart1_pmux: uart1-pmux {
groups = "GSM14";
function = "uart1";
};
twsi2_pmux: twsi2-pmux {
groups = "GSM13";
function = "twsi2";
};
twsi3_pmux: twsi3-pmux {
groups = "GSM14";
function = "twsi3";
};
};
uart1_pmux: uart1-pmux {
groups = "GSM14";
function = "uart1";
};
twsi2_pmux: twsi2-pmux {
groups = "GSM13";
function = "twsi2";
};
twsi3_pmux: twsi3-pmux {
groups = "GSM14";
function = "twsi3";
adc: adc {
compatible = "marvell,berlin2-adc";
interrupts = <12>, <14>;
interrupt-names = "adc", "tsen";
};
};

4
arch/arm/boot/dts/integrator.dtsi
View File

@ -6,7 +6,7 @@
/ {
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon";
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
@ -95,7 +95,7 @@
syscon {
/* Debug registers mapped as syscon */
compatible = "syscon";
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
led@04.0 {

1
arch/arm/mach-berlin/Kconfig
View File

@ -6,6 +6,7 @@ menuconfig ARCH_BERLIN
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GENERIC_IRQ_CHIP
select MFD_SYSCON
select PINCTRL
if ARCH_BERLIN

68
arch/arm64/boot/dts/arm/juno-motherboard.dtsi
View File

@ -138,6 +138,74 @@
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
apbregs@010000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
led@08.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
label = "vexpress:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
led@08.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
label = "vexpress:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
led@08.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
label = "vexpress:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
led@08.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "vexpress:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
led@08.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "vexpress:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
led@08.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "vexpress:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
led@08.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
led@08.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "vexpress:7";
default-state = "off";
};
};
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;

6
arch/arm64/configs/defconfig
View File

@ -139,6 +139,12 @@ CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y

31
drivers/bus/Kconfig
View File

@ -7,21 +7,24 @@ menu "Bus devices"
config ARM_CCI
bool
config ARM_CCI_PMU
bool
select ARM_CCI
config ARM_CCI400_COMMON
bool
select ARM_CCI
config ARM_CCI400_PMU
bool "ARM CCI400 PMU support"
default y
depends on ARM || ARM64
depends on HW_PERF_EVENTS
depends on (ARM && CPU_V7) || ARM64
depends on PERF_EVENTS
select ARM_CCI400_COMMON
select ARM_CCI_PMU
help
Support for PMU events monitoring on the ARM CCI cache coherent
interconnect.
If unsure, say Y
Support for PMU events monitoring on the ARM CCI-400 (cache coherent
interconnect). CCI-400 supports counting events related to the
connected slave/master interfaces.
config ARM_CCI400_PORT_CTRL
bool
@ -31,6 +34,20 @@ config ARM_CCI400_PORT_CTRL
Low level power management driver for CCI400 cache coherent
interconnect for ARM platforms.
config ARM_CCI500_PMU
bool "ARM CCI500 PMU support"
default y
depends on (ARM && CPU_V7) || ARM64
depends on PERF_EVENTS
select ARM_CCI_PMU
help
Support for PMU events monitoring on the ARM CCI-500 cache coherent
interconnect. CCI-500 provides 8 independent event counters, which
can count events pertaining to the slave/master interfaces as well
as the internal events to the CCI.
If unsure, say Y
config ARM_CCN
bool "ARM CCN driver support"
depends on ARM || ARM64

905
drivers/bus/arm-cci.c
View File

File diff suppressed because it is too large Load Diff

270
drivers/bus/arm-ccn.c
View File

@ -166,13 +166,17 @@ struct arm_ccn_dt {
struct hrtimer hrtimer;
cpumask_t cpu;
struct notifier_block cpu_nb;
struct pmu pmu;
};
struct arm_ccn {
struct device *dev;
void __iomem *base;
unsigned irq_used:1;
unsigned int irq;
unsigned sbas_present:1;
unsigned sbsx_present:1;
@ -212,7 +216,7 @@ static int arm_ccn_node_to_xp_port(int node)
static void arm_ccn_pmu_config_set(u64 *config, u32 node_xp, u32 type, u32 port)
{
*config &= ~((0xff << 0) | (0xff << 8) | (0xff << 24));
*config &= ~((0xff << 0) | (0xff << 8) | (0x3 << 24));
*config |= (node_xp << 0) | (type << 8) | (port << 24);
}
@ -336,6 +340,23 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
if (event->mask)
res += snprintf(buf + res, PAGE_SIZE - res, ",mask=0x%x",
event->mask);
/* Arguments required by an event */
switch (event->type) {
case CCN_TYPE_CYCLES:
break;
case CCN_TYPE_XP:
res += snprintf(buf + res, PAGE_SIZE - res,
",xp=?,port=?,vc=?,dir=?");
if (event->event == CCN_EVENT_WATCHPOINT)
res += snprintf(buf + res, PAGE_SIZE - res,
",cmp_l=?,cmp_h=?,mask=?");
break;
default:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
break;
}
res += snprintf(buf + res, PAGE_SIZE - res, "\n");
return res;
@ -521,6 +542,25 @@ static struct attribute_group arm_ccn_pmu_cmp_mask_attr_group = {
.attrs = arm_ccn_pmu_cmp_mask_attrs,
};
static ssize_t arm_ccn_pmu_cpumask_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
return cpumap_print_to_pagebuf(true, buf, &ccn->dt.cpu);
}
static struct device_attribute arm_ccn_pmu_cpumask_attr =
__ATTR(cpumask, S_IRUGO, arm_ccn_pmu_cpumask_show, NULL);
static struct attribute *arm_ccn_pmu_cpumask_attrs[] = {
&arm_ccn_pmu_cpumask_attr.attr,
NULL,
};
static struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
.attrs = arm_ccn_pmu_cpumask_attrs,
};
/*
* Default poll period is 10ms, which is way over the top anyway,
@ -542,6 +582,7 @@ static const struct attribute_group *arm_ccn_pmu_attr_groups[] = {
&arm_ccn_pmu_events_attr_group,
&arm_ccn_pmu_format_attr_group,
&arm_ccn_pmu_cmp_mask_attr_group,
&arm_ccn_pmu_cpumask_attr_group,
NULL
};
@ -587,7 +628,65 @@ static int arm_ccn_pmu_type_eq(u32 a, u32 b)
return 0;
}
static void arm_ccn_pmu_event_destroy(struct perf_event *event)
static int arm_ccn_pmu_event_alloc(struct perf_event *event)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
u32 node_xp, type, event_id;
struct arm_ccn_component *source;
int bit;
node_xp = CCN_CONFIG_NODE(event->attr.config);
type = CCN_CONFIG_TYPE(event->attr.config);
event_id = CCN_CONFIG_EVENT(event->attr.config);
/* Allocate the cycle counter */
if (type == CCN_TYPE_CYCLES) {
if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
ccn->dt.pmu_counters_mask))
return -EAGAIN;
hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
return 0;
}
/* Allocate an event counter */
hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
CCN_NUM_PMU_EVENT_COUNTERS);
if (hw->idx < 0) {
dev_dbg(ccn->dev, "No more counters available!\n");
return -EAGAIN;
}
if (type == CCN_TYPE_XP)
source = &ccn->xp[node_xp];
else
source = &ccn->node[node_xp];
ccn->dt.pmu_counters[hw->idx].source = source;
/* Allocate an event source or a watchpoint */
if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
CCN_NUM_XP_WATCHPOINTS);
else
bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
CCN_NUM_PMU_EVENTS);
if (bit < 0) {
dev_dbg(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
node_xp);
clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
return -EAGAIN;
}
hw->config_base = bit;
ccn->dt.pmu_counters[hw->idx].event = event;
return 0;
}
static void arm_ccn_pmu_event_release(struct perf_event *event)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
@ -616,15 +715,14 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
struct arm_ccn *ccn;
struct hw_perf_event *hw = &event->hw;
u32 node_xp, type, event_id;
int valid, bit;
struct arm_ccn_component *source;
int valid;
int i;
struct perf_event *sibling;
if (event->attr.type != event->pmu->type)
return -ENOENT;
ccn = pmu_to_arm_ccn(event->pmu);
event->destroy = arm_ccn_pmu_event_destroy;
if (hw->sample_period) {
dev_warn(ccn->dev, "Sampling not supported!\n");
@ -642,6 +740,16 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
dev_warn(ccn->dev, "Can't provide per-task data!\n");
return -EOPNOTSUPP;
}
/*
* Many perf core operations (eg. events rotation) operate on a
* single CPU context. This is obvious for CPU PMUs, where one
* expects the same sets of events being observed on all CPUs,
* but can lead to issues for off-core PMUs, like CCN, where each
* event could be theoretically assigned to a different CPU. To
* mitigate this, we enforce CPU assignment to one, selected
* processor (the one described in the "cpumask" attribute).
*/
event->cpu = cpumask_first(&ccn->dt.cpu);
node_xp = CCN_CONFIG_NODE(event->attr.config);
type = CCN_CONFIG_TYPE(event->attr.config);
@ -711,48 +819,20 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
node_xp, type, port);
}
/* Allocate the cycle counter */
if (type == CCN_TYPE_CYCLES) {
if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
ccn->dt.pmu_counters_mask))
return -EAGAIN;
/*
* We must NOT create groups containing mixed PMUs, although software
* events are acceptable (for example to create a CCN group
* periodically read when a hrtimer aka cpu-clock leader triggers).
*/
if (event->group_leader->pmu != event->pmu &&
!is_software_event(event->group_leader))
return -EINVAL;
hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
return 0;
}
/* Allocate an event counter */
hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
CCN_NUM_PMU_EVENT_COUNTERS);
if (hw->idx < 0) {
dev_warn(ccn->dev, "No more counters available!\n");
return -EAGAIN;
}
if (type == CCN_TYPE_XP)
source = &ccn->xp[node_xp];
else
source = &ccn->node[node_xp];
ccn->dt.pmu_counters[hw->idx].source = source;
/* Allocate an event source or a watchpoint */
if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
CCN_NUM_XP_WATCHPOINTS);
else
bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
CCN_NUM_PMU_EVENTS);
if (bit < 0) {
dev_warn(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
node_xp);
clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
return -EAGAIN;
}
hw->config_base = bit;
ccn->dt.pmu_counters[hw->idx].event = event;
list_for_each_entry(sibling, &event->group_leader->sibling_list,
group_entry)
if (sibling->pmu != event->pmu &&
!is_software_event(sibling))
return -EINVAL;
return 0;
}
@ -835,9 +915,14 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
if (!ccn->irq_used)
/*
* Pin the timer, so that the overflows are handled by the chosen
* event->cpu (this is the same one as presented in "cpumask"
* attribute).
*/
if (!ccn->irq)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
HRTIMER_MODE_REL);
HRTIMER_MODE_REL_PINNED);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
@ -852,7 +937,7 @@ static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
if (!ccn->irq_used)
if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
@ -1014,8 +1099,13 @@ static void arm_ccn_pmu_event_config(struct perf_event *event)
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
int err;
struct hw_perf_event *hw = &event->hw;
err = arm_ccn_pmu_event_alloc(event);
if (err)
return err;
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
@ -1029,6 +1119,8 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
arm_ccn_pmu_event_release(event);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
@ -1079,12 +1171,39 @@ static enum hrtimer_restart arm_ccn_pmu_timer_handler(struct hrtimer *hrtimer)
}
static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
unsigned long action, void *hcpu)
{
struct arm_ccn_dt *dt = container_of(nb, struct arm_ccn_dt, cpu_nb);
struct arm_ccn *ccn = container_of(dt, struct arm_ccn, dt);
unsigned int cpu = (long)hcpu; /* for (long) see kernel/cpu.c */
unsigned int target;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
if (target < 0)
break;
perf_pmu_migrate_context(&dt->pmu, cpu, target);
cpumask_set_cpu(target, &dt->cpu);
WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
default:
break;
}
return NOTIFY_OK;
}
static DEFINE_IDA(arm_ccn_pmu_ida);
static int arm_ccn_pmu_init(struct arm_ccn *ccn)
{
int i;
char *name;
int err;
/* Initialize DT subsystem */
ccn->dt.base = ccn->base + CCN_REGION_SIZE;
@ -1136,20 +1255,58 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
};
/* No overflow interrupt? Have to use a timer instead. */
if (!ccn->irq_used) {
if (!ccn->irq) {
dev_info(ccn->dev, "No access to interrupts, using timer.\n");
hrtimer_init(&ccn->dt.hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
ccn->dt.hrtimer.function = arm_ccn_pmu_timer_handler;
}
return perf_pmu_register(&ccn->dt.pmu, name, -1);
/* Pick one CPU which we will use to collect data from CCN... */
cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
/*
* ... and change the selection when it goes offline. Priority is
* picked to have a chance to migrate events before perf is notified.
*/
ccn->dt.cpu_nb.notifier_call = arm_ccn_pmu_cpu_notifier;
ccn->dt.cpu_nb.priority = CPU_PRI_PERF + 1,
err = register_cpu_notifier(&ccn->dt.cpu_nb);
if (err)
goto error_cpu_notifier;
/* Also make sure that the overflow interrupt is handled by this CPU */
if (ccn->irq) {
err = irq_set_affinity(ccn->irq, &ccn->dt.cpu);
if (err) {
dev_err(ccn->dev, "Failed to set interrupt affinity!\n");
goto error_set_affinity;
}
}
err = perf_pmu_register(&ccn->dt.pmu, name, -1);
if (err)
goto error_pmu_register;
return 0;
error_pmu_register:
error_set_affinity:
unregister_cpu_notifier(&ccn->dt.cpu_nb);
error_cpu_notifier:
ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
return err;
}
static void arm_ccn_pmu_cleanup(struct arm_ccn *ccn)
{
int i;
irq_set_affinity(ccn->irq, cpu_possible_mask);
unregister_cpu_notifier(&ccn->dt.cpu_nb);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
@ -1285,6 +1442,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
{
struct arm_ccn *ccn;
struct resource *res;
unsigned int irq;
int err;
ccn = devm_kzalloc(&pdev->dev, sizeof(*ccn), GFP_KERNEL);
@ -1309,6 +1467,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res)
return -EINVAL;
irq = res->start;
/* Check if we can use the interrupt */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__DISABLE,
@ -1318,13 +1477,12 @@ static int arm_ccn_probe(struct platform_device *pdev)
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
err = devm_request_irq(ccn->dev, res->start,
arm_ccn_irq_handler, 0, dev_name(ccn->dev),
ccn);
err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
dev_name(ccn->dev), ccn);
if (err)
return err;
ccn->irq_used = 1;
ccn->irq = irq;
}

7
drivers/clk/berlin/bg2.c
View File

@ -502,12 +502,13 @@ static const struct berlin2_gate_data bg2_gates[] __initconst = {
static void __init berlin2_clock_setup(struct device_node *np)
{
struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
u8 avpll_flags = 0;
int n;
gbase = of_iomap(np, 0);
gbase = of_iomap(parent_np, 0);
if (!gbase)
return;
@ -685,7 +686,5 @@ static void __init berlin2_clock_setup(struct device_node *np)
bg2_fail:
iounmap(gbase);
}
CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl",
berlin2_clock_setup);
CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl",
CLK_OF_DECLARE(berlin2_clk, "marvell,berlin2-clk",
berlin2_clock_setup);

7
drivers/clk/berlin/bg2q.c
View File

@ -290,18 +290,19 @@ static const struct berlin2_gate_data bg2q_gates[] __initconst = {
static void __init berlin2q_clock_setup(struct device_node *np)
{
struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
int n;
gbase = of_iomap(np, 0);
gbase = of_iomap(parent_np, 0);
if (!gbase) {
pr_err("%s: Unable to map global base\n", np->full_name);
return;
}
/* BG2Q CPU PLL is not part of global registers */
cpupll_base = of_iomap(np, 1);
cpupll_base = of_iomap(parent_np, 1);
if (!cpupll_base) {
pr_err("%s: Unable to map cpupll base\n", np->full_name);
iounmap(gbase);
@ -384,5 +385,5 @@ bg2q_fail:
iounmap(cpupll_base);
iounmap(gbase);
}
CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl",
CLK_OF_DECLARE(berlin2q_clk, "marvell,berlin2q-clk",
berlin2q_clock_setup);

3
drivers/firmware/Makefile
View File

@ -12,7 +12,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/

503
drivers/firmware/qcom_scm-32.c Normal file
View File

@ -0,0 +1,503 @@
/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/qcom_scm.h>
#include <asm/outercache.h>
#include <asm/cacheflush.h>
#include "qcom_scm.h"
#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
struct qcom_scm_entry {
int flag;
void *entry;
};
static struct qcom_scm_entry qcom_scm_wb[] = {
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};
static DEFINE_MUTEX(qcom_scm_lock);
/**
* struct qcom_scm_command - one SCM command buffer
* @len: total available memory for command and response
* @buf_offset: start of command buffer
* @resp_hdr_offset: start of response buffer
* @id: command to be executed
* @buf: buffer returned from qcom_scm_get_command_buffer()
*
* An SCM command is laid out in memory as follows:
*
* ------------------- <--- struct qcom_scm_command
* | command header |
* ------------------- <--- qcom_scm_get_command_buffer()
* | command buffer |
* ------------------- <--- struct qcom_scm_response and
* | response header | qcom_scm_command_to_response()
* ------------------- <--- qcom_scm_get_response_buffer()
* | response buffer |
* -------------------
*
* There can be arbitrary padding between the headers and buffers so
* you should always use the appropriate qcom_scm_get_*_buffer() routines
* to access the buffers in a safe manner.
*/
struct qcom_scm_command {
__le32 len;
__le32 buf_offset;
__le32 resp_hdr_offset;
__le32 id;
__le32 buf[0];
};
/**
* struct qcom_scm_response - one SCM response buffer
* @len: total available memory for response
* @buf_offset: start of response data relative to start of qcom_scm_response
* @is_complete: indicates if the command has finished processing
*/
struct qcom_scm_response {
__le32 len;
__le32 buf_offset;
__le32 is_complete;
};
/**
* alloc_qcom_scm_command() - Allocate an SCM command
* @cmd_size: size of the command buffer
* @resp_size: size of the response buffer
*
* Allocate an SCM command, including enough room for the command
* and response headers as well as the command and response buffers.
*
* Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
*/
static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
{
struct qcom_scm_command *cmd;
size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
resp_size;
u32 offset;
cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
if (cmd) {
cmd->len = cpu_to_le32(len);
offset = offsetof(struct qcom_scm_command, buf);
cmd->buf_offset = cpu_to_le32(offset);
cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
}
return cmd;
}
/**
* free_qcom_scm_command() - Free an SCM command
* @cmd: command to free
*
* Free an SCM command.
*/
static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
{
kfree(cmd);
}
/**
* qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
* @cmd: command
*
* Returns a pointer to a response for a command.
*/
static inline struct qcom_scm_response *qcom_scm_command_to_response(
const struct qcom_scm_command *cmd)
{
return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
}
/**
* qcom_scm_get_command_buffer() - Get a pointer to a command buffer
* @cmd: command
*
* Returns a pointer to the command buffer of a command.
*/
static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
{
return (void *)cmd->buf;
}
/**
* qcom_scm_get_response_buffer() - Get a pointer to a response buffer
* @rsp: response
*
* Returns a pointer to a response buffer of a response.
*/
static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
{
return (void *)rsp + le32_to_cpu(rsp->buf_offset);
}
static int qcom_scm_remap_error(int err)
{
pr_err("qcom_scm_call failed with error code %d\n", err);
switch (err) {
case QCOM_SCM_ERROR:
return -EIO;
case QCOM_SCM_EINVAL_ADDR:
case QCOM_SCM_EINVAL_ARG:
return -EINVAL;
case QCOM_SCM_EOPNOTSUPP:
return -EOPNOTSUPP;
case QCOM_SCM_ENOMEM:
return -ENOMEM;
}
return -EINVAL;
}
static u32 smc(u32 cmd_addr)
{
int context_id;
register u32 r0 asm("r0") = 1;
register u32 r1 asm("r1") = (u32)&context_id;
register u32 r2 asm("r2") = cmd_addr;
do {
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
: "r3");
} while (r0 == QCOM_SCM_INTERRUPTED);
return r0;
}
static int __qcom_scm_call(const struct qcom_scm_command *cmd)
{
int ret;
u32 cmd_addr = virt_to_phys(cmd);
/*
* Flush the command buffer so that the secure world sees
* the correct data.
*/
__cpuc_flush_dcache_area((void *)cmd, cmd->len);
outer_flush_range(cmd_addr, cmd_addr + cmd->len);
ret = smc(cmd_addr);
if (ret < 0)
ret = qcom_scm_remap_error(ret);
return ret;
}
static void qcom_scm_inv_range(unsigned long start, unsigned long end)
{
u32 cacheline_size, ctr;
asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
cacheline_size = 4 << ((ctr >> 16) & 0xf);
start = round_down(start, cacheline_size);
end = round_up(end, cacheline_size);
outer_inv_range(start, end);
while (start < end) {
asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
: "memory");
start += cacheline_size;
}
dsb();
isb();
}
/**
* qcom_scm_call() - Send an SCM command
* @svc_id: service identifier
* @cmd_id: command identifier
* @cmd_buf: command buffer
* @cmd_len: length of the command buffer
* @resp_buf: response buffer
* @resp_len: length of the response buffer
*
* Sends a command to the SCM and waits for the command to finish processing.
*
* A note on cache maintenance:
* Note that any buffers that are expected to be accessed by the secure world
* must be flushed before invoking qcom_scm_call and invalidated in the cache
* immediately after qcom_scm_call returns. Cache maintenance on the command
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
size_t cmd_len, void *resp_buf, size_t resp_len)
{
int ret;
struct qcom_scm_command *cmd;
struct qcom_scm_response *rsp;
unsigned long start, end;
cmd = alloc_qcom_scm_command(cmd_len, resp_len);
if (!cmd)
return -ENOMEM;
cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
if (cmd_buf)
memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
mutex_lock(&qcom_scm_lock);
ret = __qcom_scm_call(cmd);
mutex_unlock(&qcom_scm_lock);
if (ret)
goto out;
rsp = qcom_scm_command_to_response(cmd);
start = (unsigned long)rsp;
do {
qcom_scm_inv_range(start, start + sizeof(*rsp));
} while (!rsp->is_complete);
end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
qcom_scm_inv_range(start, end);
if (resp_buf)
memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
out:
free_qcom_scm_command(cmd);
return ret;
}
#define SCM_CLASS_REGISTER (0x2 << 8)
#define SCM_MASK_IRQS BIT(5)
#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
SCM_CLASS_REGISTER | \
SCM_MASK_IRQS | \
(n & 0xf))
/**
* qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
* @svc_id: service identifier
* @cmd_id: command identifier
* @arg1: first argument
*
* This shall only be used with commands that are guaranteed to be
* uninterruptable, atomic and SMP safe.
*/
static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
{
int context_id;
register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
register u32 r1 asm("r1") = (u32)&context_id;
register u32 r2 asm("r2") = arg1;
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
: "r3");
return r0;
}
u32 qcom_scm_get_version(void)
{
int context_id;
static u32 version = -1;
register u32 r0 asm("r0");
register u32 r1 asm("r1");
if (version != -1)
return version;
mutex_lock(&qcom_scm_lock);
r0 = 0x1 << 8;
r1 = (u32)&context_id;
do {
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r1")
__asmeq("%2", "r0")
__asmeq("%3", "r1")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0), "=r" (r1)
: "r" (r0), "r" (r1)
: "r2", "r3");
} while (r0 == QCOM_SCM_INTERRUPTED);
version = r1;
mutex_unlock(&qcom_scm_lock);
return version;
}
EXPORT_SYMBOL(qcom_scm_get_version);
/*
* Set the cold/warm boot address for one of the CPU cores.
*/
static int qcom_scm_set_boot_addr(u32 addr, int flags)
{
struct {
__le32 flags;
__le32 addr;
} cmd;
cmd.addr = cpu_to_le32(addr);
cmd.flags = cpu_to_le32(flags);
return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
&cmd, sizeof(cmd), NULL, 0);
}
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
* Set the cold boot address of the cpus. Any cpu outside the supported
* range would be removed from the cpu present mask.
*/
int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
int flags = 0;
int cpu;
int scm_cb_flags[] = {
QCOM_SCM_FLAG_COLDBOOT_CPU0,
QCOM_SCM_FLAG_COLDBOOT_CPU1,
QCOM_SCM_FLAG_COLDBOOT_CPU2,
QCOM_SCM_FLAG_COLDBOOT_CPU3,
};
if (!cpus || (cpus && cpumask_empty(cpus)))
return -EINVAL;
for_each_cpu(cpu, cpus) {
if (cpu < ARRAY_SIZE(scm_cb_flags))
flags |= scm_cb_flags[cpu];
else
set_cpu_present(cpu, false);
}
return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
}
/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
int ret;
int flags = 0;
int cpu;
/*
* Reassign only if we are switching from hotplug entry point
* to cpuidle entry point or vice versa.
*/
for_each_cpu(cpu, cpus) {
if (entry == qcom_scm_wb[cpu].entry)
continue;
flags |= qcom_scm_wb[cpu].flag;
}
/* No change in entry function */
if (!flags)
return 0;
ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
if (!ret) {
for_each_cpu(cpu, cpus)
qcom_scm_wb[cpu].entry = entry;
}
return ret;
}
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
*
* This is an end point to power down cpu. If there was a pending interrupt,
* the control would return from this function, otherwise, the cpu jumps to the
* warm boot entry point set for this cpu upon reset.
*/
void __qcom_scm_cpu_power_down(u32 flags)
{
qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
{
int ret;
u32 svc_cmd = (svc_id << 10) | cmd_id;
u32 ret_val = 0;
ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
sizeof(svc_cmd), &ret_val, sizeof(ret_val));
if (ret)
return ret;
return ret_val;
}
int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}

474
drivers/firmware/qcom_scm.c
View File

@ -1,4 +1,4 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@ -16,393 +16,12 @@
* 02110-1301, USA.
*/
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <asm/outercache.h>
#include <asm/cacheflush.h>
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
#define QCOM_SCM_EINVAL_ARG -2
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
struct qcom_scm_entry {
int flag;
void *entry;
};
static struct qcom_scm_entry qcom_scm_wb[] = {
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};
static DEFINE_MUTEX(qcom_scm_lock);
/**
* struct qcom_scm_command - one SCM command buffer
* @len: total available memory for command and response
* @buf_offset: start of command buffer
* @resp_hdr_offset: start of response buffer
* @id: command to be executed
* @buf: buffer returned from qcom_scm_get_command_buffer()
*
* An SCM command is laid out in memory as follows:
*
* ------------------- <--- struct qcom_scm_command
* | command header |
* ------------------- <--- qcom_scm_get_command_buffer()
* | command buffer |
* ------------------- <--- struct qcom_scm_response and
* | response header | qcom_scm_command_to_response()
* ------------------- <--- qcom_scm_get_response_buffer()
* | response buffer |
* -------------------
*
* There can be arbitrary padding between the headers and buffers so
* you should always use the appropriate qcom_scm_get_*_buffer() routines
* to access the buffers in a safe manner.
*/
struct qcom_scm_command {
__le32 len;
__le32 buf_offset;
__le32 resp_hdr_offset;
__le32 id;
__le32 buf[0];
};
/**
* struct qcom_scm_response - one SCM response buffer
* @len: total available memory for response
* @buf_offset: start of response data relative to start of qcom_scm_response
* @is_complete: indicates if the command has finished processing
*/
struct qcom_scm_response {
__le32 len;
__le32 buf_offset;
__le32 is_complete;
};
/**
* alloc_qcom_scm_command() - Allocate an SCM command
* @cmd_size: size of the command buffer
* @resp_size: size of the response buffer
*
* Allocate an SCM command, including enough room for the command
* and response headers as well as the command and response buffers.
*
* Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
*/
static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
{
struct qcom_scm_command *cmd;
size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
resp_size;
u32 offset;
cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
if (cmd) {
cmd->len = cpu_to_le32(len);
offset = offsetof(struct qcom_scm_command, buf);
cmd->buf_offset = cpu_to_le32(offset);
cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
}
return cmd;
}
/**
* free_qcom_scm_command() - Free an SCM command
* @cmd: command to free
*
* Free an SCM command.
*/
static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
{
kfree(cmd);
}
/**
* qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
* @cmd: command
*
* Returns a pointer to a response for a command.
*/
static inline struct qcom_scm_response *qcom_scm_command_to_response(
const struct qcom_scm_command *cmd)
{
return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
}
/**
* qcom_scm_get_command_buffer() - Get a pointer to a command buffer
* @cmd: command
*
* Returns a pointer to the command buffer of a command.
*/
static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
{
return (void *)cmd->buf;
}
/**
* qcom_scm_get_response_buffer() - Get a pointer to a response buffer
* @rsp: response
*
* Returns a pointer to a response buffer of a response.
*/
static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
{
return (void *)rsp + le32_to_cpu(rsp->buf_offset);
}
static int qcom_scm_remap_error(int err)
{
pr_err("qcom_scm_call failed with error code %d\n", err);
switch (err) {
case QCOM_SCM_ERROR:
return -EIO;
case QCOM_SCM_EINVAL_ADDR:
case QCOM_SCM_EINVAL_ARG:
return -EINVAL;
case QCOM_SCM_EOPNOTSUPP:
return -EOPNOTSUPP;
case QCOM_SCM_ENOMEM:
return -ENOMEM;
}
return -EINVAL;
}
static u32 smc(u32 cmd_addr)
{
int context_id;
register u32 r0 asm("r0") = 1;
register u32 r1 asm("r1") = (u32)&context_id;
register u32 r2 asm("r2") = cmd_addr;
do {
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
: "r3");
} while (r0 == QCOM_SCM_INTERRUPTED);
return r0;
}
static int __qcom_scm_call(const struct qcom_scm_command *cmd)
{
int ret;
u32 cmd_addr = virt_to_phys(cmd);
/*
* Flush the command buffer so that the secure world sees
* the correct data.
*/
__cpuc_flush_dcache_area((void *)cmd, cmd->len);
outer_flush_range(cmd_addr, cmd_addr + cmd->len);
ret = smc(cmd_addr);
if (ret < 0)
ret = qcom_scm_remap_error(ret);
return ret;
}
static void qcom_scm_inv_range(unsigned long start, unsigned long end)
{
u32 cacheline_size, ctr;
asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
cacheline_size = 4 << ((ctr >> 16) & 0xf);
start = round_down(start, cacheline_size);
end = round_up(end, cacheline_size);
outer_inv_range(start, end);
while (start < end) {
asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
: "memory");
start += cacheline_size;
}
dsb();
isb();
}
/**
* qcom_scm_call() - Send an SCM command
* @svc_id: service identifier
* @cmd_id: command identifier
* @cmd_buf: command buffer
* @cmd_len: length of the command buffer
* @resp_buf: response buffer
* @resp_len: length of the response buffer
*
* Sends a command to the SCM and waits for the command to finish processing.
*
* A note on cache maintenance:
* Note that any buffers that are expected to be accessed by the secure world
* must be flushed before invoking qcom_scm_call and invalidated in the cache
* immediately after qcom_scm_call returns. Cache maintenance on the command
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
size_t cmd_len, void *resp_buf, size_t resp_len)
{
int ret;
struct qcom_scm_command *cmd;
struct qcom_scm_response *rsp;
unsigned long start, end;
cmd = alloc_qcom_scm_command(cmd_len, resp_len);
if (!cmd)
return -ENOMEM;
cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
if (cmd_buf)
memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
mutex_lock(&qcom_scm_lock);
ret = __qcom_scm_call(cmd);
mutex_unlock(&qcom_scm_lock);
if (ret)
goto out;
rsp = qcom_scm_command_to_response(cmd);
start = (unsigned long)rsp;
do {
qcom_scm_inv_range(start, start + sizeof(*rsp));
} while (!rsp->is_complete);
end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
qcom_scm_inv_range(start, end);
if (resp_buf)
memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
out:
free_qcom_scm_command(cmd);
return ret;
}
#define SCM_CLASS_REGISTER (0x2 << 8)
#define SCM_MASK_IRQS BIT(5)
#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
SCM_CLASS_REGISTER | \
SCM_MASK_IRQS | \
(n & 0xf))
/**
* qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
* @svc_id: service identifier
* @cmd_id: command identifier
* @arg1: first argument
*
* This shall only be used with commands that are guaranteed to be
* uninterruptable, atomic and SMP safe.
*/
static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
{
int context_id;
register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
register u32 r1 asm("r1") = (u32)&context_id;
register u32 r2 asm("r2") = arg1;
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
: "r3");
return r0;
}
u32 qcom_scm_get_version(void)
{
int context_id;
static u32 version = -1;
register u32 r0 asm("r0");
register u32 r1 asm("r1");
if (version != -1)
return version;
mutex_lock(&qcom_scm_lock);
r0 = 0x1 << 8;
r1 = (u32)&context_id;
do {
asm volatile(
__asmeq("%0", "r0")
__asmeq("%1", "r1")
__asmeq("%2", "r0")
__asmeq("%3", "r1")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0), "=r" (r1)
: "r" (r0), "r" (r1)
: "r2", "r3");
} while (r0 == QCOM_SCM_INTERRUPTED);
version = r1;
mutex_unlock(&qcom_scm_lock);
return version;
}
EXPORT_SYMBOL(qcom_scm_get_version);
#define QCOM_SCM_SVC_BOOT 0x1
#define QCOM_SCM_BOOT_ADDR 0x1
/*
* Set the cold/warm boot address for one of the CPU cores.
*/
static int qcom_scm_set_boot_addr(u32 addr, int flags)
{
struct {
__le32 flags;
__le32 addr;
} cmd;
cmd.addr = cpu_to_le32(addr);
cmd.flags = cpu_to_le32(flags);
return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
&cmd, sizeof(cmd), NULL, 0);
}
#include "qcom_scm.h"
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
@ -414,26 +33,7 @@ static int qcom_scm_set_boot_addr(u32 addr, int flags)
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
int flags = 0;
int cpu;
int scm_cb_flags[] = {
QCOM_SCM_FLAG_COLDBOOT_CPU0,
QCOM_SCM_FLAG_COLDBOOT_CPU1,
QCOM_SCM_FLAG_COLDBOOT_CPU2,
QCOM_SCM_FLAG_COLDBOOT_CPU3,
};
if (!cpus || (cpus && cpumask_empty(cpus)))
return -EINVAL;
for_each_cpu(cpu, cpus) {
if (cpu < ARRAY_SIZE(scm_cb_flags))
flags |= scm_cb_flags[cpu];
else
set_cpu_present(cpu, false);
}
return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
return __qcom_scm_set_cold_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
@ -447,37 +47,10 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
int ret;
int flags = 0;
int cpu;
/*
* Reassign only if we are switching from hotplug entry point
* to cpuidle entry point or vice versa.
*/
for_each_cpu(cpu, cpus) {
if (entry == qcom_scm_wb[cpu].entry)
continue;
flags |= qcom_scm_wb[cpu].flag;
}
/* No change in entry function */
if (!flags)
return 0;
ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
if (!ret) {
for_each_cpu(cpu, cpus)
qcom_scm_wb[cpu].entry = entry;
}
return ret;
return __qcom_scm_set_warm_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
#define QCOM_SCM_CMD_TERMINATE_PC 0x2
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
@ -488,7 +61,36 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
*/
void qcom_scm_cpu_power_down(u32 flags)
{
qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
__qcom_scm_cpu_power_down(flags);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
/**
* qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
*
* Return true if HDCP is supported, false if not.
*/
bool qcom_scm_hdcp_available(void)
{
int ret;
ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
QCOM_SCM_CMD_HDCP);
return (ret > 0) ? true : false;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
/**
* qcom_scm_hdcp_req() - Send HDCP request.
* @req: HDCP request array
* @req_cnt: HDCP request array count
* @resp: response buffer passed to SCM
*
* Write HDCP register(s) through SCM.
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
return __qcom_scm_hdcp_req(req, req_cnt, resp);
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);

47
drivers/firmware/qcom_scm.h Normal file
View File

@ -0,0 +1,47 @@
/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
#define QCOM_SCM_SVC_BOOT 0x1
#define QCOM_SCM_BOOT_ADDR 0x1
#define QCOM_SCM_BOOT_ADDR_MC 0x11
#define QCOM_SCM_FLAG_HLOS 0x01
#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_CMD_TERMINATE_PC 0x2
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_INFO 0x6
#define QCOM_IS_CALL_AVAIL_CMD 0x1
extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_CMD_HDCP 0x01
extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
/* common error codes */
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
#define QCOM_SCM_EINVAL_ARG -2
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
#endif

2
drivers/iommu/Kconfig
View File

@ -219,7 +219,7 @@ config TEGRA_IOMMU_SMMU
select IOMMU_API
help
This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
SoCs (Tegra30 up to Tegra124).
SoCs (Tegra30 up to Tegra132).
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"

109
drivers/iommu/tegra-smmu.c
View File

@ -7,6 +7,7 @@
*/
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/iommu.h>
#include <linux/kernel.h>
@ -31,6 +32,8 @@ struct tegra_smmu {
struct mutex lock;
struct list_head list;
struct dentry *debugfs;
};
struct tegra_smmu_as {
@ -673,6 +676,103 @@ static void tegra_smmu_ahb_enable(void)
}
}
static int tegra_smmu_swgroups_show(struct seq_file *s, void *data)
{
struct tegra_smmu *smmu = s->private;
unsigned int i;
u32 value;
seq_printf(s, "swgroup enabled ASID\n");
seq_printf(s, "------------------------\n");
for (i = 0; i < smmu->soc->num_swgroups; i++) {
const struct tegra_smmu_swgroup *group = &smmu->soc->swgroups[i];
const char *status;
unsigned int asid;
value = smmu_readl(smmu, group->reg);
if (value & SMMU_ASID_ENABLE)
status = "yes";
else
status = "no";
asid = value & SMMU_ASID_MASK;
seq_printf(s, "%-9s %-7s %#04x\n", group->name, status,
asid);
}
return 0;
}
static int tegra_smmu_swgroups_open(struct inode *inode, struct file *file)
{
return single_open(file, tegra_smmu_swgroups_show, inode->i_private);
}
static const struct file_operations tegra_smmu_swgroups_fops = {
.open = tegra_smmu_swgroups_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int tegra_smmu_clients_show(struct seq_file *s, void *data)
{
struct tegra_smmu *smmu = s->private;
unsigned int i;
u32 value;
seq_printf(s, "client enabled\n");
seq_printf(s, "--------------------\n");
for (i = 0; i < smmu->soc->num_clients; i++) {
const struct tegra_mc_client *client = &smmu->soc->clients[i];
const char *status;
value = smmu_readl(smmu, client->smmu.reg);
if (value & BIT(client->smmu.bit))
status = "yes";
else
status = "no";
seq_printf(s, "%-12s %s\n", client->name, status);
}
return 0;
}
static int tegra_smmu_clients_open(struct inode *inode, struct file *file)
{
return single_open(file, tegra_smmu_clients_show, inode->i_private);
}
static const struct file_operations tegra_smmu_clients_fops = {
.open = tegra_smmu_clients_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void tegra_smmu_debugfs_init(struct tegra_smmu *smmu)
{
smmu->debugfs = debugfs_create_dir("smmu", NULL);
if (!smmu->debugfs)
return;
debugfs_create_file("swgroups", S_IRUGO, smmu->debugfs, smmu,
&tegra_smmu_swgroups_fops);
debugfs_create_file("clients", S_IRUGO, smmu->debugfs, smmu,
&tegra_smmu_clients_fops);
}
static void tegra_smmu_debugfs_exit(struct tegra_smmu *smmu)
{
debugfs_remove_recursive(smmu->debugfs);
}
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc)
@ -743,5 +843,14 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
if (err < 0)
return ERR_PTR(err);
if (IS_ENABLED(CONFIG_DEBUG_FS))
tegra_smmu_debugfs_init(smmu);
return smmu;
}
void tegra_smmu_remove(struct tegra_smmu *smmu)
{
if (IS_ENABLED(CONFIG_DEBUG_FS))
tegra_smmu_debugfs_exit(smmu);
}

176
drivers/leds/leds-syscon.c
View File

@ -20,6 +20,7 @@
* MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@ -66,102 +67,101 @@ static void syscon_led_set(struct led_classdev *led_cdev,
dev_err(sled->cdev.dev, "error updating LED status\n");
}
static int __init syscon_leds_spawn(struct device_node *np,
struct device *dev,
struct regmap *map)
static int syscon_led_probe(struct platform_device *pdev)
{
struct device_node *child;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device *parent;
struct regmap *map;
struct syscon_led *sled;
const char *state;
int ret;
for_each_available_child_of_node(np, child) {
struct syscon_led *sled;
const char *state;
/* Only check for register-bit-leds */
if (of_property_match_string(child, "compatible",
"register-bit-led") < 0)
continue;
sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
if (!sled)
return -ENOMEM;
sled->map = map;
if (of_property_read_u32(child, "offset", &sled->offset))
return -EINVAL;
if (of_property_read_u32(child, "mask", &sled->mask))
return -EINVAL;
sled->cdev.name =
of_get_property(child, "label", NULL) ? : child->name;
sled->cdev.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
state = of_get_property(child, "default-state", NULL);
if (state) {
if (!strcmp(state, "keep")) {
u32 val;
ret = regmap_read(map, sled->offset, &val);
if (ret < 0)
return ret;
sled->state = !!(val & sled->mask);
} else if (!strcmp(state, "on")) {
sled->state = true;
ret = regmap_update_bits(map, sled->offset,
sled->mask,
sled->mask);
if (ret < 0)
return ret;
} else {
sled->state = false;
ret = regmap_update_bits(map, sled->offset,
sled->mask, 0);
if (ret < 0)
return ret;
}
}
sled->cdev.brightness_set = syscon_led_set;
ret = led_classdev_register(dev, &sled->cdev);
if (ret < 0)
return ret;
dev_info(dev, "registered LED %s\n", sled->cdev.name);
parent = dev->parent;
if (!parent) {
dev_err(dev, "no parent for syscon LED\n");
return -ENODEV;
}
map = syscon_node_to_regmap(parent->of_node);
if (!map) {
dev_err(dev, "no regmap for syscon LED parent\n");
return -ENODEV;
}
sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
if (!sled)
return -ENOMEM;
sled->map = map;
if (of_property_read_u32(np, "offset", &sled->offset))
return -EINVAL;
if (of_property_read_u32(np, "mask", &sled->mask))
return -EINVAL;
sled->cdev.name =
of_get_property(np, "label", NULL) ? : np->name;
sled->cdev.default_trigger =
of_get_property(np, "linux,default-trigger", NULL);
state = of_get_property(np, "default-state", NULL);
if (state) {
if (!strcmp(state, "keep")) {
u32 val;
ret = regmap_read(map, sled->offset, &val);
if (ret < 0)
return ret;
sled->state = !!(val & sled->mask);
} else if (!strcmp(state, "on")) {
sled->state = true;
ret = regmap_update_bits(map, sled->offset,
sled->mask,
sled->mask);
if (ret < 0)
return ret;
} else {
sled->state = false;
ret = regmap_update_bits(map, sled->offset,
sled->mask, 0);
if (ret < 0)
return ret;
}
}
sled->cdev.brightness_set = syscon_led_set;
ret = led_classdev_register(dev, &sled->cdev);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, sled);
dev_info(dev, "registered LED %s\n", sled->cdev.name);
return 0;
}
static int __init syscon_leds_init(void)
static int syscon_led_remove(struct platform_device *pdev)
{
struct device_node *np;
for_each_of_allnodes(np) {
struct platform_device *pdev;
struct regmap *map;
int ret;
if (!of_device_is_compatible(np, "syscon"))
continue;
map = syscon_node_to_regmap(np);
if (IS_ERR(map)) {
pr_err("error getting regmap for syscon LEDs\n");
continue;
}
/*
* If the map is there, the device should be there, we allocate
* memory on the syscon device's behalf here.
*/
pdev = of_find_device_by_node(np);
if (!pdev)
return -ENODEV;
ret = syscon_leds_spawn(np, &pdev->dev, map);
if (ret)
dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
}
struct syscon_led *sled = platform_get_drvdata(pdev);
led_classdev_unregister(&sled->cdev);
/* Turn it off */
regmap_update_bits(sled->map, sled->offset, sled->mask, 0);
return 0;
}
device_initcall(syscon_leds_init);
static const struct of_device_id of_syscon_leds_match[] = {
{ .compatible = "register-bit-led", },
{},
};
MODULE_DEVICE_TABLE(of, of_syscon_leds_match);
static struct platform_driver syscon_led_driver = {
.probe = syscon_led_probe,
.remove = syscon_led_remove,
.driver = {
.name = "leds-syscon",
.of_match_table = of_syscon_leds_match,
},
};
module_platform_driver(syscon_led_driver);

10
drivers/memory/tegra/Kconfig
View File

@ -5,3 +5,13 @@ config TEGRA_MC
help
This driver supports the Memory Controller (MC) hardware found on
NVIDIA Tegra SoCs.
config TEGRA124_EMC
bool "NVIDIA Tegra124 External Memory Controller driver"
default y
depends on TEGRA_MC && ARCH_TEGRA_124_SOC
help
This driver is for the External Memory Controller (EMC) found on
Tegra124 chips. The EMC controls the external DRAM on the board.
This driver is required to change memory timings / clock rate for
external memory.

3
drivers/memory/tegra/Makefile
View File

@ -3,5 +3,8 @@ tegra-mc-y := mc.o
tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30.o
tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o

143
drivers/memory/tegra/mc.c
View File

@ -13,6 +13,9 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sort.h>
#include <soc/tegra/fuse.h>
#include "mc.h"
@ -48,6 +51,9 @@
#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff
#define MC_EMEM_ARB_MISC0 0xd8
#define MC_EMEM_ADR_CFG 0x54
#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0)
static const struct of_device_id tegra_mc_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
{ .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc },
@ -57,6 +63,9 @@ static const struct of_device_id tegra_mc_of_match[] = {
#endif
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{ .compatible = "nvidia,tegra124-mc", .data = &tegra124_mc_soc },
#endif
#ifdef CONFIG_ARCH_TEGRA_132_SOC
{ .compatible = "nvidia,tegra132-mc", .data = &tegra132_mc_soc },
#endif
{ }
};
@ -91,6 +100,130 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
return 0;
}
void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate)
{
unsigned int i;
struct tegra_mc_timing *timing = NULL;
for (i = 0; i < mc->num_timings; i++) {
if (mc->timings[i].rate == rate) {
timing = &mc->timings[i];
break;
}
}
if (!timing) {
dev_err(mc->dev, "no memory timing registered for rate %lu\n",
rate);
return;
}
for (i = 0; i < mc->soc->num_emem_regs; ++i)
mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]);
}
unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc)
{
u8 dram_count;
dram_count = mc_readl(mc, MC_EMEM_ADR_CFG);
dram_count &= MC_EMEM_ADR_CFG_EMEM_NUMDEV;
dram_count++;
return dram_count;
}
static int load_one_timing(struct tegra_mc *mc,
struct tegra_mc_timing *timing,
struct device_node *node)
{
int err;
u32 tmp;
err = of_property_read_u32(node, "clock-frequency", &tmp);
if (err) {
dev_err(mc->dev,
"timing %s: failed to read rate\n", node->name);
return err;
}
timing->rate = tmp;
timing->emem_data = devm_kcalloc(mc->dev, mc->soc->num_emem_regs,
sizeof(u32), GFP_KERNEL);
if (!timing->emem_data)
return -ENOMEM;
err = of_property_read_u32_array(node, "nvidia,emem-configuration",
timing->emem_data,
mc->soc->num_emem_regs);
if (err) {
dev_err(mc->dev,
"timing %s: failed to read EMEM configuration\n",
node->name);
return err;
}
return 0;
}
static int load_timings(struct tegra_mc *mc, struct device_node *node)
{
struct device_node *child;
struct tegra_mc_timing *timing;
int child_count = of_get_child_count(node);
int i = 0, err;
mc->timings = devm_kcalloc(mc->dev, child_count, sizeof(*timing),
GFP_KERNEL);
if (!mc->timings)
return -ENOMEM;
mc->num_timings = child_count;
for_each_child_of_node(node, child) {
timing = &mc->timings[i++];
err = load_one_timing(mc, timing, child);
if (err)
return err;
}
return 0;
}
static int tegra_mc_setup_timings(struct tegra_mc *mc)
{
struct device_node *node;
u32 ram_code, node_ram_code;
int err;
ram_code = tegra_read_ram_code();
mc->num_timings = 0;
for_each_child_of_node(mc->dev->of_node, node) {
err = of_property_read_u32(node, "nvidia,ram-code",
&node_ram_code);
if (err || (node_ram_code != ram_code)) {
of_node_put(node);
continue;
}
err = load_timings(mc, node);
if (err)
return err;
of_node_put(node);
break;
}
if (mc->num_timings == 0)
dev_warn(mc->dev,
"no memory timings for RAM code %u registered\n",
ram_code);
return 0;
}
static const char *const status_names[32] = {
[ 1] = "External interrupt",
[ 6] = "EMEM address decode error",
@ -248,6 +381,12 @@ static int tegra_mc_probe(struct platform_device *pdev)
return err;
}
err = tegra_mc_setup_timings(mc);
if (err < 0) {
dev_err(&pdev->dev, "failed to setup timings: %d\n", err);
return err;
}
if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
if (IS_ERR(mc->smmu)) {
@ -273,8 +412,8 @@ static int tegra_mc_probe(struct platform_device *pdev)
value = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE |
MC_INT_ARBITRATION_EMEM | MC_INT_SECURITY_VIOLATION |
MC_INT_DECERR_EMEM;
MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM;
mc_writel(mc, value, MC_INTMASK);
return 0;

4
drivers/memory/tegra/mc.h
View File

@ -37,4 +37,8 @@ extern const struct tegra_mc_soc tegra114_mc_soc;
extern const struct tegra_mc_soc tegra124_mc_soc;
#endif
#ifdef CONFIG_ARCH_TEGRA_132_SOC
extern const struct tegra_mc_soc tegra132_mc_soc;
#endif
#endif /* MEMORY_TEGRA_MC_H */

32
drivers/memory/tegra/tegra114.c
View File

@ -896,22 +896,22 @@ static const struct tegra_mc_client tegra114_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra114_swgroups[] = {
{ .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
{ .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
{ .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
{ .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
{ .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
{ .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
{ .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
{ .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
{ .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
{ .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
{ .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
{ .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
{ .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
{ .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
{ .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
{ .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
{ .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
{ .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
};
static void tegra114_flush_dcache(struct page *page, unsigned long offset,

1140
drivers/memory/tegra/tegra124-emc.c Normal file
View File

File diff suppressed because it is too large Load Diff

123
drivers/memory/tegra/tegra124.c
View File

@ -15,6 +15,48 @@
#include "mc.h"
#define MC_EMEM_ARB_CFG 0x90
#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94
#define MC_EMEM_ARB_TIMING_RCD 0x98
#define MC_EMEM_ARB_TIMING_RP 0x9c
#define MC_EMEM_ARB_TIMING_RC 0xa0
#define MC_EMEM_ARB_TIMING_RAS 0xa4
#define MC_EMEM_ARB_TIMING_FAW 0xa8
#define MC_EMEM_ARB_TIMING_RRD 0xac
#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0
#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4
#define MC_EMEM_ARB_TIMING_R2R 0xb8
#define MC_EMEM_ARB_TIMING_W2W 0xbc
#define MC_EMEM_ARB_TIMING_R2W 0xc0
#define MC_EMEM_ARB_TIMING_W2R 0xc4
#define MC_EMEM_ARB_DA_TURNS 0xd0
#define MC_EMEM_ARB_DA_COVERS 0xd4
#define MC_EMEM_ARB_MISC0 0xd8
#define MC_EMEM_ARB_MISC1 0xdc
#define MC_EMEM_ARB_RING1_THROTTLE 0xe0
static const unsigned long tegra124_mc_emem_regs[] = {
MC_EMEM_ARB_CFG,
MC_EMEM_ARB_OUTSTANDING_REQ,
MC_EMEM_ARB_TIMING_RCD,
MC_EMEM_ARB_TIMING_RP,
MC_EMEM_ARB_TIMING_RC,
MC_EMEM_ARB_TIMING_RAS,
MC_EMEM_ARB_TIMING_FAW,
MC_EMEM_ARB_TIMING_RRD,
MC_EMEM_ARB_TIMING_RAP2PRE,
MC_EMEM_ARB_TIMING_WAP2PRE,
MC_EMEM_ARB_TIMING_R2R,
MC_EMEM_ARB_TIMING_W2W,
MC_EMEM_ARB_TIMING_R2W,
MC_EMEM_ARB_TIMING_W2R,
MC_EMEM_ARB_DA_TURNS,
MC_EMEM_ARB_DA_COVERS,
MC_EMEM_ARB_MISC0,
MC_EMEM_ARB_MISC1,
MC_EMEM_ARB_RING1_THROTTLE
};
static const struct tegra_mc_client tegra124_mc_clients[] = {
{
.id = 0x00,
@ -934,29 +976,29 @@ static const struct tegra_mc_client tegra124_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
{ .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
{ .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
{ .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
{ .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
{ .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
{ .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
{ .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
{ .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
{ .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
{ .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
{ .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
{ .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
{ .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
{ .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
{ .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
{ .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
{ .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
{ .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
{ .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
{ .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .name = "isp2", .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
{ .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
{ .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
{ .name = "isp2b", .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
{ .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
{ .name = "a9avp", .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
{ .name = "gpu", .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
{ .name = "sdmmc1a", .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
{ .name = "sdmmc2a", .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
{ .name = "sdmmc3a", .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
{ .name = "sdmmc4a", .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
{ .name = "vic", .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
{ .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
};
#ifdef CONFIG_ARCH_TEGRA_124_SOC
@ -991,5 +1033,40 @@ const struct tegra_mc_soc tegra124_mc_soc = {
.num_address_bits = 34,
.atom_size = 32,
.smmu = &tegra124_smmu_soc,
.emem_regs = tegra124_mc_emem_regs,
.num_emem_regs = ARRAY_SIZE(tegra124_mc_emem_regs),
};
#endif /* CONFIG_ARCH_TEGRA_124_SOC */
#ifdef CONFIG_ARCH_TEGRA_132_SOC
static void tegra132_flush_dcache(struct page *page, unsigned long offset,
size_t size)
{
void *virt = page_address(page) + offset;
__flush_dcache_area(virt, size);
}
static const struct tegra_smmu_ops tegra132_smmu_ops = {
.flush_dcache = tegra132_flush_dcache,
};
static const struct tegra_smmu_soc tegra132_smmu_soc = {
.clients = tegra124_mc_clients,
.num_clients = ARRAY_SIZE(tegra124_mc_clients),
.swgroups = tegra124_swgroups,
.num_swgroups = ARRAY_SIZE(tegra124_swgroups),
.supports_round_robin_arbitration = true,
.supports_request_limit = true,
.num_asids = 128,
.ops = &tegra132_smmu_ops,
};
const struct tegra_mc_soc tegra132_mc_soc = {
.clients = tegra124_mc_clients,
.num_clients = ARRAY_SIZE(tegra124_mc_clients),
.num_address_bits = 34,
.atom_size = 32,
.smmu = &tegra132_smmu_soc,
};
#endif /* CONFIG_ARCH_TEGRA_132_SOC */

32
drivers/memory/tegra/tegra30.c
View File

@ -918,22 +918,22 @@ static const struct tegra_mc_client tegra30_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra30_swgroups[] = {
{ .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
{ .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
{ .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
{ .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
{ .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
{ .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
{ .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
{ .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
{ .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
{ .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
{ .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
{ .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
{ .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
{ .name = "mpe", .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
{ .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
{ .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
{ .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
{ .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
{ .name = "nv2", .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
{ .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
{ .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
{ .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
{ .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
{ .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
{ .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
};
static void tegra30_flush_dcache(struct page *page, unsigned long offset,

1
drivers/of/platform.c
View File

@ -25,6 +25,7 @@
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
{ .compatible = "simple-mfd", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */

26
drivers/pinctrl/berlin/berlin-bg2.c
View File

@ -218,11 +218,11 @@ static const struct berlin_pinctrl_desc berlin2_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2_pinctrl_match[] = {
{
.compatible = "marvell,berlin2-chip-ctrl",
.compatible = "marvell,berlin2-soc-pinctrl",
.data = &berlin2_soc_pinctrl_data
},
{
.compatible = "marvell,berlin2-system-ctrl",
.compatible = "marvell,berlin2-system-pinctrl",
.data = &berlin2_sysmgr_pinctrl_data
},
{}
@ -233,28 +233,6 @@ static int berlin2_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2_pinctrl_match, &pdev->dev);
struct regmap_config *rmconfig;
struct regmap *regmap;
struct resource *res;
void __iomem *base;
rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
if (!rmconfig)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
rmconfig->reg_bits = 32,
rmconfig->val_bits = 32,
rmconfig->reg_stride = 4,
rmconfig->max_register = resource_size(res);
regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}

26
drivers/pinctrl/berlin/berlin-bg2cd.c
View File

@ -161,11 +161,11 @@ static const struct berlin_pinctrl_desc berlin2cd_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2cd_pinctrl_match[] = {
{
.compatible = "marvell,berlin2cd-chip-ctrl",
.compatible = "marvell,berlin2cd-soc-pinctrl",
.data = &berlin2cd_soc_pinctrl_data
},
{
.compatible = "marvell,berlin2cd-system-ctrl",
.compatible = "marvell,berlin2cd-system-pinctrl",
.data = &berlin2cd_sysmgr_pinctrl_data
},
{}
@ -176,28 +176,6 @@ static int berlin2cd_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2cd_pinctrl_match, &pdev->dev);
struct regmap_config *rmconfig;
struct regmap *regmap;
struct resource *res;
void __iomem *base;
rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
if (!rmconfig)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
rmconfig->reg_bits = 32,
rmconfig->val_bits = 32,
rmconfig->reg_stride = 4,
rmconfig->max_register = resource_size(res);
regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}

26
drivers/pinctrl/berlin/berlin-bg2q.c
View File

@ -380,11 +380,11 @@ static const struct berlin_pinctrl_desc berlin2q_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2q_pinctrl_match[] = {
{
.compatible = "marvell,berlin2q-chip-ctrl",
.compatible = "marvell,berlin2q-soc-pinctrl",
.data = &berlin2q_soc_pinctrl_data,
},
{
.compatible = "marvell,berlin2q-system-ctrl",
.compatible = "marvell,berlin2q-system-pinctrl",
.data = &berlin2q_sysmgr_pinctrl_data,
},
{}
@ -395,28 +395,6 @@ static int berlin2q_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2q_pinctrl_match, &pdev->dev);
struct regmap_config *rmconfig;
struct regmap *regmap;
struct resource *res;
void __iomem *base;
rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
if (!rmconfig)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
rmconfig->reg_bits = 32,
rmconfig->val_bits = 32,
rmconfig->reg_stride = 4,
rmconfig->max_register = resource_size(res);
regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}

9
drivers/pinctrl/berlin/berlin.c
View File

@ -11,6 +11,7 @@
*/
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@ -295,13 +296,15 @@ int berlin_pinctrl_probe(struct platform_device *pdev,
const struct berlin_pinctrl_desc *desc)
{
struct device *dev = &pdev->dev;
struct device_node *parent_np = of_get_parent(dev->of_node);
struct berlin_pinctrl *pctrl;
struct regmap *regmap;
int ret;
regmap = dev_get_regmap(&pdev->dev, NULL);
if (!regmap)
return -ENODEV;
regmap = syscon_node_to_regmap(parent_np);
of_node_put(parent_np);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)

72
drivers/reset/reset-berlin.c
View File

@ -11,10 +11,12 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/types.h>
@ -25,8 +27,7 @@
container_of((p), struct berlin_reset_priv, rcdev)
struct berlin_reset_priv {
void __iomem *base;
unsigned int size;
struct regmap *regmap;
struct reset_controller_dev rcdev;
};
@ -37,7 +38,7 @@ static int berlin_reset_reset(struct reset_controller_dev *rcdev,
int offset = id >> 8;
int mask = BIT(id & 0x1f);
writel(mask, priv->base + offset);
regmap_write(priv->regmap, offset, mask);
/* let the reset be effective */
udelay(10);
@ -52,7 +53,6 @@ static struct reset_control_ops berlin_reset_ops = {
static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
unsigned offset, bit;
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
@ -61,71 +61,53 @@ static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
offset = reset_spec->args[0];
bit = reset_spec->args[1];
if (offset >= priv->size)
return -EINVAL;
if (bit >= BERLIN_MAX_RESETS)
return -EINVAL;
return (offset << 8) | bit;
}
static int __berlin_reset_init(struct device_node *np)
static int berlin2_reset_probe(struct platform_device *pdev)
{
struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
struct berlin_reset_priv *priv;
struct resource res;
resource_size_t size;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
ret = of_address_to_resource(np, 0, &res);
if (ret)
goto err;
size = resource_size(&res);
priv->base = ioremap(res.start, size);
if (!priv->base) {
ret = -ENOMEM;
goto err;
}
priv->size = size;
priv->regmap = syscon_node_to_regmap(parent_np);
of_node_put(parent_np);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.ops = &berlin_reset_ops;
priv->rcdev.of_node = np;
priv->rcdev.of_node = pdev->dev.of_node;
priv->rcdev.of_reset_n_cells = 2;
priv->rcdev.of_xlate = berlin_reset_xlate;
reset_controller_register(&priv->rcdev);
return 0;
err:
kfree(priv);
return ret;
}
static const struct of_device_id berlin_reset_of_match[] __initconst = {
{ .compatible = "marvell,berlin2-chip-ctrl" },
{ .compatible = "marvell,berlin2cd-chip-ctrl" },
{ .compatible = "marvell,berlin2q-chip-ctrl" },
static const struct of_device_id berlin_reset_dt_match[] = {
{ .compatible = "marvell,berlin2-reset" },
{ },
};
MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
static int __init berlin_reset_init(void)
{
struct device_node *np;
int ret;
static struct platform_driver berlin_reset_driver = {
.probe = berlin2_reset_probe,
.driver = {
.name = "berlin2-reset",
.of_match_table = berlin_reset_dt_match,
},
};
module_platform_driver(berlin_reset_driver);
for_each_matching_node(np, berlin_reset_of_match) {
ret = __berlin_reset_init(np);
if (ret)
return ret;
}
return 0;
}
arch_initcall(berlin_reset_init);
MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
MODULE_DESCRIPTION("Marvell Berlin reset driver");
MODULE_LICENSE("GPL");

1
drivers/soc/Kconfig
View File

@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"

1
drivers/soc/Makefile
View File

@ -4,6 +4,7 @@
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/

7
drivers/soc/qcom/Kconfig
View File

@ -10,3 +10,10 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
config QCOM_PM
bool "Qualcomm Power Management"
depends on ARCH_QCOM && !ARM64
help
QCOM Platform specific power driver to manage cores and L2 low power
modes. It interface with various system drivers to put the cores in
low power modes.

1
drivers/soc/qcom/Makefile
View File

@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_PM) += spm.o

385
drivers/soc/qcom/spm.c Normal file
View File

@ -0,0 +1,385 @@
/*
* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
* Copyright (c) 2014,2015, Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/qcom_scm.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#define MAX_PMIC_DATA 2
#define MAX_SEQ_DATA 64
#define SPM_CTL_INDEX 0x7f
#define SPM_CTL_INDEX_SHIFT 4
#define SPM_CTL_EN BIT(0)
enum pm_sleep_mode {
PM_SLEEP_MODE_STBY,
PM_SLEEP_MODE_RET,
PM_SLEEP_MODE_SPC,
PM_SLEEP_MODE_PC,
PM_SLEEP_MODE_NR,
};
enum spm_reg {
SPM_REG_CFG,
SPM_REG_SPM_CTL,
SPM_REG_DLY,
SPM_REG_PMIC_DLY,
SPM_REG_PMIC_DATA_0,
SPM_REG_PMIC_DATA_1,
SPM_REG_VCTL,
SPM_REG_SEQ_ENTRY,
SPM_REG_SPM_STS,
SPM_REG_PMIC_STS,
SPM_REG_NR,
};
struct spm_reg_data {
const u8 *reg_offset;
u32 spm_cfg;
u32 spm_dly;
u32 pmic_dly;
u32 pmic_data[MAX_PMIC_DATA];
u8 seq[MAX_SEQ_DATA];
u8 start_index[PM_SLEEP_MODE_NR];
};
struct spm_driver_data {
void __iomem *reg_base;
const struct spm_reg_data *reg_data;
};
static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
[SPM_REG_SPM_CTL] = 0x30,
[SPM_REG_DLY] = 0x34,
[SPM_REG_SEQ_ENTRY] = 0x80,
};
/* SPM register data for 8974, 8084 */
static const struct spm_reg_data spm_reg_8974_8084_cpu = {
.reg_offset = spm_reg_offset_v2_1,
.spm_cfg = 0x1,
.spm_dly = 0x3C102800,
.seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
0x0F },
.start_index[PM_SLEEP_MODE_STBY] = 0,
.start_index[PM_SLEEP_MODE_SPC] = 3,
};
static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
[SPM_REG_SPM_CTL] = 0x20,
[SPM_REG_PMIC_DLY] = 0x24,
[SPM_REG_PMIC_DATA_0] = 0x28,
[SPM_REG_PMIC_DATA_1] = 0x2C,
[SPM_REG_SEQ_ENTRY] = 0x80,
};
/* SPM register data for 8064 */
static const struct spm_reg_data spm_reg_8064_cpu = {
.reg_offset = spm_reg_offset_v1_1,
.spm_cfg = 0x1F,
.pmic_dly = 0x02020004,
.pmic_data[0] = 0x0084009C,
.pmic_data[1] = 0x00A4001C,
.seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
.start_index[PM_SLEEP_MODE_STBY] = 0,
.start_index[PM_SLEEP_MODE_SPC] = 2,
};
static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
typedef int (*idle_fn)(int);
static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
static inline void spm_register_write(struct spm_driver_data *drv,
enum spm_reg reg, u32 val)
{
if (drv->reg_data->reg_offset[reg])
writel_relaxed(val, drv->reg_base +
drv->reg_data->reg_offset[reg]);
}
/* Ensure a guaranteed write, before return */
static inline void spm_register_write_sync(struct spm_driver_data *drv,
enum spm_reg reg, u32 val)
{
u32 ret;
if (!drv->reg_data->reg_offset[reg])
return;
do {
writel_relaxed(val, drv->reg_base +
drv->reg_data->reg_offset[reg]);
ret = readl_relaxed(drv->reg_base +
drv->reg_data->reg_offset[reg]);
if (ret == val)
break;
cpu_relax();
} while (1);
}
static inline u32 spm_register_read(struct spm_driver_data *drv,
enum spm_reg reg)
{
return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
}
static void spm_set_low_power_mode(struct spm_driver_data *drv,
enum pm_sleep_mode mode)
{
u32 start_index;
u32 ctl_val;
start_index = drv->reg_data->start_index[mode];
ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
ctl_val |= SPM_CTL_EN;
spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
}
static int qcom_pm_collapse(unsigned long int unused)
{
qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
/*
* Returns here only if there was a pending interrupt and we did not
* power down as a result.
*/
return -1;
}
static int qcom_cpu_spc(int cpu)
{
int ret;
struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
ret = cpu_suspend(0, qcom_pm_collapse);
/*
* ARM common code executes WFI without calling into our driver and
* if the SPM mode is not reset, then we may accidently power down the
* cpu when we intended only to gate the cpu clock.
* Ensure the state is set to standby before returning.
*/
spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
return ret;
}
static int qcom_idle_enter(int cpu, unsigned long index)
{
return per_cpu(qcom_idle_ops, cpu)[index](cpu);
}
static const struct of_device_id qcom_idle_state_match[] __initconst = {
{ .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },
{ },
};
static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
{
const struct of_device_id *match_id;
struct device_node *state_node;
int i;
int state_count = 1;
idle_fn idle_fns[CPUIDLE_STATE_MAX];
idle_fn *fns;
cpumask_t mask;
bool use_scm_power_down = false;
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
break;
if (!of_device_is_available(state_node))
continue;
if (i == CPUIDLE_STATE_MAX) {
pr_warn("%s: cpuidle states reached max possible\n",
__func__);
break;
}
match_id = of_match_node(qcom_idle_state_match, state_node);
if (!match_id)
return -ENODEV;
idle_fns[state_count] = match_id->data;
/* Check if any of the states allow power down */
if (match_id->data == qcom_cpu_spc)
use_scm_power_down = true;
state_count++;
}
if (state_count == 1)
goto check_spm;
fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),
GFP_KERNEL);
if (!fns)
return -ENOMEM;
for (i = 1; i < state_count; i++)
fns[i] = idle_fns[i];
if (use_scm_power_down) {
/* We have atleast one power down mode */
cpumask_clear(&mask);
cpumask_set_cpu(cpu, &mask);
qcom_scm_set_warm_boot_addr(cpu_resume, &mask);
}
per_cpu(qcom_idle_ops, cpu) = fns;
/*
* SPM probe for the cpu should have happened by now, if the
* SPM device does not exist, return -ENXIO to indicate that the
* cpu does not support idle states.
*/
check_spm:
return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
}
static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
.suspend = qcom_idle_enter,
.init = qcom_cpuidle_init,
};
CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
int *spm_cpu)
{
struct spm_driver_data *drv = NULL;
struct device_node *cpu_node, *saw_node;
int cpu;
bool found;
for_each_possible_cpu(cpu) {
cpu_node = of_cpu_device_node_get(cpu);
if (!cpu_node)
continue;
saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
found = (saw_node == pdev->dev.of_node);
of_node_put(saw_node);
of_node_put(cpu_node);
if (found)
break;
}
if (found) {
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (drv)
*spm_cpu = cpu;
}
return drv;
}
static const struct of_device_id spm_match_table[] = {
{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
.data = &spm_reg_8974_8084_cpu },
{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
.data = &spm_reg_8974_8084_cpu },
{ .compatible = "qcom,apq8064-saw2-v1.1-cpu",
.data = &spm_reg_8064_cpu },
{ },
};
static int spm_dev_probe(struct platform_device *pdev)
{
struct spm_driver_data *drv;
struct resource *res;
const struct of_device_id *match_id;
void __iomem *addr;
int cpu;
drv = spm_get_drv(pdev, &cpu);
if (!drv)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(drv->reg_base))
return PTR_ERR(drv->reg_base);
match_id = of_match_node(spm_match_table, pdev->dev.of_node);
if (!match_id)
return -ENODEV;
drv->reg_data = match_id->data;
/* Write the SPM sequences first.. */
addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
__iowrite32_copy(addr, drv->reg_data->seq,
ARRAY_SIZE(drv->reg_data->seq) / 4);
/*
* ..and then the control registers.
* On some SoC if the control registers are written first and if the
* CPU was held in reset, the reset signal could trigger the SPM state
* machine, before the sequences are completely written.
*/
spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
spm_register_write(drv, SPM_REG_PMIC_DATA_0,
drv->reg_data->pmic_data[0]);
spm_register_write(drv, SPM_REG_PMIC_DATA_1,
drv->reg_data->pmic_data[1]);
/* Set up Standby as the default low power mode */
spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
per_cpu(cpu_spm_drv, cpu) = drv;
return 0;
}
static struct platform_driver spm_driver = {
.probe = spm_dev_probe,
.driver = {
.name = "saw",
.of_match_table = spm_match_table,
},
};
module_platform_driver(spm_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("SAW power controller driver");
MODULE_ALIAS("platform:saw");

10
drivers/soc/sunxi/Kconfig Normal file
View File

@ -0,0 +1,10 @@
#
# Allwinner sunXi SoC drivers
#
config SUNXI_SRAM
bool
default ARCH_SUNXI
help
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
whether to the CPU/DMA, or to the devices.

1
drivers/soc/sunxi/Makefile Normal file
View File

@ -0,0 +1 @@
obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o

284
drivers/soc/sunxi/sunxi_sram.c Normal file
View File

@ -0,0 +1,284 @@
/*
* Allwinner SoCs SRAM Controller Driver
*
* Copyright (C) 2015 Maxime Ripard
*
* Author: Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/debugfs.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/soc/sunxi/sunxi_sram.h>
struct sunxi_sram_func {
char *func;
u8 val;
};
struct sunxi_sram_data {
char *name;
u8 reg;
u8 offset;
u8 width;
struct sunxi_sram_func *func;
struct list_head list;
};
struct sunxi_sram_desc {
struct sunxi_sram_data data;
bool claimed;
};
#define SUNXI_SRAM_MAP(_val, _func) \
{ \
.func = _func, \
.val = _val, \
}
#define SUNXI_SRAM_DATA(_name, _reg, _off, _width, ...) \
{ \
.name = _name, \
.reg = _reg, \
.offset = _off, \
.width = _width, \
.func = (struct sunxi_sram_func[]){ \
__VA_ARGS__, { } }, \
}
static struct sunxi_sram_desc sun4i_a10_sram_a3_a4 = {
.data = SUNXI_SRAM_DATA("A3-A4", 0x4, 0x4, 2,
SUNXI_SRAM_MAP(0, "cpu"),
SUNXI_SRAM_MAP(1, "emac")),
};
static struct sunxi_sram_desc sun4i_a10_sram_d = {
.data = SUNXI_SRAM_DATA("D", 0x4, 0x0, 1,
SUNXI_SRAM_MAP(0, "cpu"),
SUNXI_SRAM_MAP(1, "usb-otg")),
};
static const struct of_device_id sunxi_sram_dt_ids[] = {
{
.compatible = "allwinner,sun4i-a10-sram-a3-a4",
.data = &sun4i_a10_sram_a3_a4.data,
},
{
.compatible = "allwinner,sun4i-a10-sram-d",
.data = &sun4i_a10_sram_d.data,
},
{}
};
static struct device *sram_dev;
static LIST_HEAD(claimed_sram);
static DEFINE_SPINLOCK(sram_lock);
static void __iomem *base;
static int sunxi_sram_show(struct seq_file *s, void *data)
{
struct device_node *sram_node, *section_node;
const struct sunxi_sram_data *sram_data;
const struct of_device_id *match;
struct sunxi_sram_func *func;
const __be32 *sram_addr_p, *section_addr_p;
u32 val;
seq_puts(s, "Allwinner sunXi SRAM\n");
seq_puts(s, "--------------------\n\n");
for_each_child_of_node(sram_dev->of_node, sram_node) {
sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
seq_printf(s, "sram@%08x\n",
be32_to_cpu(*sram_addr_p));
for_each_child_of_node(sram_node, section_node) {
match = of_match_node(sunxi_sram_dt_ids, section_node);
if (!match)
continue;
sram_data = match->data;
section_addr_p = of_get_address(section_node, 0,
NULL, NULL);
seq_printf(s, "\tsection@%04x\t(%s)\n",
be32_to_cpu(*section_addr_p),
sram_data->name);
val = readl(base + sram_data->reg);
val >>= sram_data->offset;
val &= sram_data->width;
for (func = sram_data->func; func->func; func++) {
seq_printf(s, "\t\t%s%c\n", func->func,
func->val == val ? '*' : ' ');
}
}
seq_puts(s, "\n");
}
return 0;
}
static int sunxi_sram_open(struct inode *inode, struct file *file)
{
return single_open(file, sunxi_sram_show, inode->i_private);
}
static const struct file_operations sunxi_sram_fops = {
.open = sunxi_sram_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static inline struct sunxi_sram_desc *to_sram_desc(const struct sunxi_sram_data *data)
{
return container_of(data, struct sunxi_sram_desc, data);
}
static const struct sunxi_sram_data *sunxi_sram_of_parse(struct device_node *node,
unsigned int *value)
{
const struct of_device_id *match;
struct of_phandle_args args;
int ret;
ret = of_parse_phandle_with_fixed_args(node, "allwinner,sram", 1, 0,
&args);
if (ret)
return ERR_PTR(ret);
if (!of_device_is_available(args.np)) {
ret = -EBUSY;
goto err;
}
if (value)
*value = args.args[0];
match = of_match_node(sunxi_sram_dt_ids, args.np);
if (!match) {
ret = -EINVAL;
goto err;
}
of_node_put(args.np);
return match->data;
err:
of_node_put(args.np);
return ERR_PTR(ret);
}
int sunxi_sram_claim(struct device *dev)
{
const struct sunxi_sram_data *sram_data;
struct sunxi_sram_desc *sram_desc;
unsigned int device;
u32 val, mask;
if (IS_ERR(base))
return -EPROBE_DEFER;
if (!dev || !dev->of_node)
return -EINVAL;
sram_data = sunxi_sram_of_parse(dev->of_node, &device);
if (IS_ERR(sram_data))
return PTR_ERR(sram_data);
sram_desc = to_sram_desc(sram_data);
spin_lock(&sram_lock);
if (sram_desc->claimed) {
spin_unlock(&sram_lock);
return -EBUSY;
}
mask = GENMASK(sram_data->offset + sram_data->width, sram_data->offset);
val = readl(base + sram_data->reg);
val &= ~mask;
writel(val | ((device << sram_data->offset) & mask),
base + sram_data->reg);
spin_unlock(&sram_lock);
return 0;
}
EXPORT_SYMBOL(sunxi_sram_claim);
int sunxi_sram_release(struct device *dev)
{
const struct sunxi_sram_data *sram_data;
struct sunxi_sram_desc *sram_desc;
if (!dev || !dev->of_node)
return -EINVAL;
sram_data = sunxi_sram_of_parse(dev->of_node, NULL);
if (IS_ERR(sram_data))
return -EINVAL;
sram_desc = to_sram_desc(sram_data);
spin_lock(&sram_lock);
sram_desc->claimed = false;
spin_unlock(&sram_lock);
return 0;
}
EXPORT_SYMBOL(sunxi_sram_release);
static int sunxi_sram_probe(struct platform_device *pdev)
{
struct resource *res;
struct dentry *d;
sram_dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
d = debugfs_create_file("sram", S_IRUGO, NULL, NULL,
&sunxi_sram_fops);
if (!d)
return -ENOMEM;
return 0;
}
static const struct of_device_id sunxi_sram_dt_match[] = {
{ .compatible = "allwinner,sun4i-a10-sram-controller" },
{ },
};
MODULE_DEVICE_TABLE(of, sunxi_sram_dt_match);
static struct platform_driver sunxi_sram_driver = {
.driver = {
.name = "sunxi-sram",
.of_match_table = sunxi_sram_dt_match,
},
.probe = sunxi_sram_probe,
};
module_platform_driver(sunxi_sram_driver);
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_DESCRIPTION("Allwinner sunXi SRAM Controller Driver");
MODULE_LICENSE("GPL");

21
drivers/soc/tegra/fuse/tegra-apbmisc.c
View File

@ -28,8 +28,15 @@
#define APBMISC_SIZE 0x64
#define FUSE_SKU_INFO 0x10
#define PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT 4
#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG \
(0xf << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT \
(0x3 << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
static void __iomem *apbmisc_base;
static void __iomem *strapping_base;
static bool long_ram_code;
u32 tegra_read_chipid(void)
{
@ -54,6 +61,18 @@ u32 tegra_read_straps(void)
return 0;
}
u32 tegra_read_ram_code(void)
{
u32 straps = tegra_read_straps();
if (long_ram_code)
straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG;
else
straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT;
return straps >> PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT;
}
static const struct of_device_id apbmisc_match[] __initconst = {
{ .compatible = "nvidia,tegra20-apbmisc", },
{},
@ -112,4 +131,6 @@ void __init tegra_init_apbmisc(void)
strapping_base = of_iomap(np, 1);
if (!strapping_base)
pr_err("ioremap tegra strapping_base failed\n");
long_ram_code = of_property_read_bool(np, "nvidia,long-ram-code");
}

13
include/linux/qcom_scm.h
View File

@ -1,4 +1,4 @@
/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@ -16,6 +16,17 @@
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_HDCP_MAX_REQ_CNT 5
struct qcom_scm_hdcp_req {
u32 addr;
u32 val;
};
extern bool qcom_scm_hdcp_available(void);
extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1

19
include/linux/soc/sunxi/sunxi_sram.h Normal file
View File

@ -0,0 +1,19 @@
/*
* Allwinner SoCs SRAM Controller Driver
*
* Copyright (C) 2015 Maxime Ripard
*
* Author: Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _SUNXI_SRAM_H_
#define _SUNXI_SRAM_H_
int sunxi_sram_claim(struct device *dev);
int sunxi_sram_release(struct device *dev);
#endif /* _SUNXI_SRAM_H_ */

19
include/soc/tegra/emc.h Normal file
View File

@ -0,0 +1,19 @@
/*
* Copyright (c) 2014 NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __SOC_TEGRA_EMC_H__
#define __SOC_TEGRA_EMC_H__
struct tegra_emc;
int tegra_emc_prepare_timing_change(struct tegra_emc *emc,
unsigned long rate);
void tegra_emc_complete_timing_change(struct tegra_emc *emc,
unsigned long rate);
#endif /* __SOC_TEGRA_EMC_H__ */

1
include/soc/tegra/fuse.h
View File

@ -56,6 +56,7 @@ struct tegra_sku_info {
};
u32 tegra_read_straps(void);
u32 tegra_read_ram_code(void);
u32 tegra_read_chipid(void);
int tegra_fuse_readl(unsigned long offset, u32 *value);

20
include/soc/tegra/mc.h
View File

@ -20,6 +20,12 @@ struct tegra_smmu_enable {
unsigned int bit;
};
struct tegra_mc_timing {
unsigned long rate;
u32 *emem_data;
};
/* latency allowance */
struct tegra_mc_la {
unsigned int reg;
@ -40,6 +46,7 @@ struct tegra_mc_client {
};
struct tegra_smmu_swgroup {
const char *name;
unsigned int swgroup;
unsigned int reg;
};
@ -71,6 +78,7 @@ struct tegra_smmu;
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc);
void tegra_smmu_remove(struct tegra_smmu *smmu);
#else
static inline struct tegra_smmu *
tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
@ -78,13 +86,17 @@ tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
{
return NULL;
}
static inline void tegra_smmu_remove(struct tegra_smmu *smmu)
{
}
#endif
struct tegra_mc_soc {
const struct tegra_mc_client *clients;
unsigned int num_clients;
const unsigned int *emem_regs;
const unsigned long *emem_regs;
unsigned int num_emem_regs;
unsigned int num_address_bits;
@ -102,6 +114,12 @@ struct tegra_mc {
const struct tegra_mc_soc *soc;
unsigned long tick;
struct tegra_mc_timing *timings;
unsigned int num_timings;
};
void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate);
unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc);
#endif /* __SOC_TEGRA_MC_H__ */