From 8efaac07d7e6694f39521f9fb8a5c848b712ecee Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 8 Jun 2018 08:04:57 +0200 Subject: [PATCH 01/10] drm/bridge/sii8620: simplify hardware reset procedure There is no need to flip reset pin twice. Also delays can be changed to values present in vendor's code. Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Reviewed-by: Maciej Purski Link: https://patchwork.freedesktop.org/patch/msgid/20180608060457.18357-1-a.hajda@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 7ab36042a822..d1e780fba4b6 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -971,8 +971,17 @@ static int sii8620_hw_on(struct sii8620 *ctx) ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret) return ret; + usleep_range(10000, 20000); - return clk_prepare_enable(ctx->clk_xtal); + ret = clk_prepare_enable(ctx->clk_xtal); + if (ret) + return ret; + + msleep(100); + gpiod_set_value(ctx->gpio_reset, 0); + msleep(100); + + return 0; } static int sii8620_hw_off(struct sii8620 *ctx) @@ -982,17 +991,6 @@ static int sii8620_hw_off(struct sii8620 *ctx) return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); } -static void sii8620_hw_reset(struct sii8620 *ctx) -{ - usleep_range(10000, 20000); - gpiod_set_value(ctx->gpio_reset, 0); - usleep_range(5000, 20000); - gpiod_set_value(ctx->gpio_reset, 1); - usleep_range(10000, 20000); - gpiod_set_value(ctx->gpio_reset, 0); - msleep(300); -} - static void sii8620_cbus_reset(struct sii8620 *ctx) { sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST @@ -2112,7 +2110,6 @@ static void sii8620_cable_in(struct sii8620 *ctx) dev_err(dev, "Error powering on, %d.\n", ret); return; } - sii8620_hw_reset(ctx); sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver)); ret = sii8620_clear_error(ctx); From 8e627a1b1ce8feb3e1da4428b71b9b4905f04888 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Mon, 15 Jan 2018 18:33:57 +0100 Subject: [PATCH 02/10] drm/bridge/sii8620: fix loops in EDID fetch logic Function should constantly check if cable is connected and finish in finite time. Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Reviewed-by: Maciej Purski Link: https://patchwork.freedesktop.org/patch/msgid/20180115173357.31067-4-a.hajda@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 31 ++++++++++++++++++---------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index d1e780fba4b6..720bc7c325e0 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -807,6 +807,7 @@ static void sii8620_burst_rx_all(struct sii8620 *ctx) static void sii8620_fetch_edid(struct sii8620 *ctx) { u8 lm_ddc, ddc_cmd, int3, cbus; + unsigned long timeout; int fetched, i; int edid_len = EDID_LENGTH; u8 *edid; @@ -856,23 +857,31 @@ static void sii8620_fetch_edid(struct sii8620 *ctx) REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK ); - do { - int3 = sii8620_readb(ctx, REG_INTR3); + int3 = 0; + timeout = jiffies + msecs_to_jiffies(200); + for (;;) { cbus = sii8620_readb(ctx, REG_CBUS_STATUS); - - if (int3 & BIT_DDC_CMD_DONE) - break; - - if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) { + if (~cbus & BIT_CBUS_STATUS_CBUS_CONNECTED) { + kfree(edid); + edid = NULL; + goto end; + } + if (int3 & BIT_DDC_CMD_DONE) { + if (sii8620_readb(ctx, REG_DDC_DOUT_CNT) + >= FETCH_SIZE) + break; + } else { + int3 = sii8620_readb(ctx, REG_INTR3); + } + if (time_is_before_jiffies(timeout)) { + ctx->error = -ETIMEDOUT; + dev_err(ctx->dev, "timeout during EDID read\n"); kfree(edid); edid = NULL; goto end; } - } while (1); - - sii8620_readb(ctx, REG_DDC_STATUS); - while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE) usleep_range(10, 20); + } sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE); if (fetched + FETCH_SIZE == EDID_LENGTH) { From ecba7cfa3afbe489288f2c819158b7402afd7ee9 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Fri, 2 Feb 2018 11:54:25 +0100 Subject: [PATCH 03/10] drm/bridge/sii8620: fix display modes validation Current implementation of mode_valid() and mode_fixup() callbacks handle packed pixel modes improperly. Fix it by using proper maximum clock values from the documentation. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1517568865-25219-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 78 ++++++++++++++-------------- 1 file changed, 40 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 720bc7c325e0..5267dc6551af 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -36,8 +36,11 @@ #define SII8620_BURST_BUF_LEN 288 #define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3) -#define MHL1_MAX_LCLK 225000 -#define MHL3_MAX_LCLK 600000 + +#define MHL1_MAX_PCLK 75000 +#define MHL1_MAX_PCLK_PP_MODE 150000 +#define MHL3_MAX_PCLK 200000 +#define MHL3_MAX_PCLK_PP_MODE 300000 enum sii8620_mode { CM_DISCONNECTED, @@ -2274,17 +2277,43 @@ static void sii8620_detach(struct drm_bridge *bridge) rc_unregister_device(ctx->rc_dev); } +static int sii8620_is_packing_required(struct sii8620 *ctx, + const struct drm_display_mode *mode) +{ + int max_pclk, max_pclk_pp_mode; + + if (sii8620_is_mhl3(ctx)) { + max_pclk = MHL3_MAX_PCLK; + max_pclk_pp_mode = MHL3_MAX_PCLK_PP_MODE; + } else { + max_pclk = MHL1_MAX_PCLK; + max_pclk_pp_mode = MHL1_MAX_PCLK_PP_MODE; + } + + if (mode->clock < max_pclk) + return 0; + else if (mode->clock < max_pclk_pp_mode) + return 1; + else + return -1; +} + static enum drm_mode_status sii8620_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode) { struct sii8620 *ctx = bridge_to_sii8620(bridge); + int pack_required = sii8620_is_packing_required(ctx, mode); bool can_pack = ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL; - unsigned int max_pclk = sii8620_is_mhl3(ctx) ? MHL3_MAX_LCLK : - MHL1_MAX_LCLK; - max_pclk /= can_pack ? 2 : 3; - return (mode->clock > max_pclk) ? MODE_CLOCK_HIGH : MODE_OK; + switch (pack_required) { + case 0: + return MODE_OK; + case 1: + return (can_pack) ? MODE_OK : MODE_CLOCK_HIGH; + default: + return MODE_CLOCK_HIGH; + } } static bool sii8620_mode_fixup(struct drm_bridge *bridge, @@ -2292,43 +2321,16 @@ static bool sii8620_mode_fixup(struct drm_bridge *bridge, struct drm_display_mode *adjusted_mode) { struct sii8620 *ctx = bridge_to_sii8620(bridge); - int max_lclk; - bool ret = true; mutex_lock(&ctx->lock); - max_lclk = sii8620_is_mhl3(ctx) ? MHL3_MAX_LCLK : MHL1_MAX_LCLK; - if (max_lclk > 3 * adjusted_mode->clock) { - ctx->use_packed_pixel = 0; - goto end; - } - if ((ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL) && - max_lclk > 2 * adjusted_mode->clock) { - ctx->use_packed_pixel = 1; - goto end; - } - ret = false; -end: - if (ret) { - u8 vic = drm_match_cea_mode(adjusted_mode); + ctx->use_packed_pixel = sii8620_is_packing_required(ctx, adjusted_mode); + ctx->video_code = drm_match_cea_mode(adjusted_mode); + ctx->pixel_clock = adjusted_mode->clock; - if (!vic) { - union hdmi_infoframe frm; - u8 mhl_vic[] = { 0, 95, 94, 93, 98 }; - - /* FIXME: We need the connector here */ - drm_hdmi_vendor_infoframe_from_display_mode( - &frm.vendor.hdmi, NULL, adjusted_mode); - vic = frm.vendor.hdmi.vic; - if (vic >= ARRAY_SIZE(mhl_vic)) - vic = 0; - vic = mhl_vic[vic]; - } - ctx->video_code = vic; - ctx->pixel_clock = adjusted_mode->clock; - } mutex_unlock(&ctx->lock); - return ret; + + return true; } static const struct drm_bridge_funcs sii8620_bridge_funcs = { From 9378cecb1ce5d618b8aff4d65113ddcf72fc1011 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Wed, 22 Nov 2017 10:08:38 +0100 Subject: [PATCH 04/10] drm/bridge/sii8620: fix potential buffer overflow Buffer overflow error should not occur, as mode_fixup() callback filters pixel clock value and it should never exceed 600000. However, current implementation is not obviously safe and relies on implementation of mode_fixup(). Make 'i' variable never reach unsafe value in order to avoid buffer overflow error. Reported-by: Dan Carpenter Fixes: bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence") Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 5267dc6551af..61fd3e0a4ba6 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -1226,7 +1226,7 @@ static void sii8620_start_video(struct sii8620 *ctx) int clk = ctx->pixel_clock * (ctx->use_packed_pixel ? 2 : 3); int i; - for (i = 0; i < ARRAY_SIZE(clk_spec); ++i) + for (i = 0; i < ARRAY_SIZE(clk_spec) - 1; ++i) if (clk < clk_spec[i].max_clk) break; From bbc05e172fad9affa388be35b78b9e5e5da76648 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Wed, 29 Nov 2017 12:48:50 +0100 Subject: [PATCH 05/10] drm/bridge/sii8620: start MHL transmission after HDMI signal detection The vendor code waits for infoframe to detect video mode set by source. We do not need to follow this pattern, because video mode information is provided by drm core. As a result most of the infoframe handling code can be removed. Start transmission immediately after detecting stream on HDMI lines in irq_scdt() function without waiting for infoframe interrupt. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1511956130-24482-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 53 ++-------------------------- 1 file changed, 2 insertions(+), 51 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 61fd3e0a4ba6..853c4f97c7c9 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -1941,14 +1941,6 @@ static void sii8620_irq_edid(struct sii8620 *ctx) ctx->mt_state = MT_STATE_DONE; } -static void sii8620_scdt_high(struct sii8620 *ctx) -{ - sii8620_write_seq_static(ctx, - REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI, - REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI, - ); -} - static void sii8620_irq_scdt(struct sii8620 *ctx) { u8 stat = sii8620_readb(ctx, REG_INTR5); @@ -1956,53 +1948,13 @@ static void sii8620_irq_scdt(struct sii8620 *ctx) if (stat & BIT_INTR_SCDT_CHANGE) { u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3); - if (cstat & BIT_TMDS_CSTAT_P3_SCDT) { - if (ctx->sink_type == SINK_HDMI) - /* enable infoframe interrupt */ - sii8620_scdt_high(ctx); - else - sii8620_start_video(ctx); - } + if (cstat & BIT_TMDS_CSTAT_P3_SCDT) + sii8620_start_video(ctx); } sii8620_write(ctx, REG_INTR5, stat); } -static void sii8620_new_vsi(struct sii8620 *ctx) -{ - u8 vsif[11]; - - sii8620_write(ctx, REG_RX_HDMI_CTRL2, - VAL_RX_HDMI_CTRL2_DEFVAL | - BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI); - sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif, - ARRAY_SIZE(vsif)); -} - -static void sii8620_new_avi(struct sii8620 *ctx) -{ - sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL); - sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif, - ARRAY_SIZE(ctx->avif)); -} - -static void sii8620_irq_infr(struct sii8620 *ctx) -{ - u8 stat = sii8620_readb(ctx, REG_INTR8) - & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI); - - sii8620_write(ctx, REG_INTR8, stat); - - if (stat & BIT_CEA_NEW_VSI) - sii8620_new_vsi(ctx); - - if (stat & BIT_CEA_NEW_AVI) - sii8620_new_avi(ctx); - - if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI)) - sii8620_start_video(ctx); -} - static void sii8620_got_xdevcap(struct sii8620 *ctx, int ret) { if (ret < 0) @@ -2084,7 +2036,6 @@ static irqreturn_t sii8620_irq_thread(int irq, void *data) { BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid }, { BIT_FAST_INTR_STAT_DDC, sii8620_irq_ddc }, { BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt }, - { BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr }, }; struct sii8620 *ctx = data; u8 stats[LEN_FAST_INTR_STAT]; From 95e8522588c81fdef1b10777a874c4a1fe14bf88 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Wed, 29 Nov 2017 16:12:47 +0100 Subject: [PATCH 06/10] drm/bridge/sii8620: remove HSIC initialization HSIC initialization was taken from the vendor code. HSIC in MHL circuit is not connected, so it is not possible to test it. Tests prove that without HSIC the device works well. Therefore it can be removed. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1511968368-30884-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 38 ---------------------------- 1 file changed, 38 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 853c4f97c7c9..ff041bec0cf4 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -511,50 +511,12 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) sink_str[ctx->sink_type], sink_name); } -static void sii8620_hsic_init(struct sii8620 *ctx) -{ - if (!sii8620_is_mhl3(ctx)) - return; - - sii8620_write(ctx, REG_FCGC, - BIT_FCGC_HSIC_HOSTMODE | BIT_FCGC_HSIC_ENABLE); - sii8620_setbits(ctx, REG_HRXCTRL3, - BIT_HRXCTRL3_HRX_STAY_RESET | BIT_HRXCTRL3_STATUS_EN, ~0); - sii8620_setbits(ctx, REG_TTXNUMB, MSK_TTXNUMB_TTX_NUMBPS, 4); - sii8620_setbits(ctx, REG_TRXCTRL, BIT_TRXCTRL_TRX_FROM_SE_COC, ~0); - sii8620_setbits(ctx, REG_HTXCTRL, BIT_HTXCTRL_HTX_DRVCONN1, 0); - sii8620_setbits(ctx, REG_KEEPER, MSK_KEEPER_MODE, VAL_KEEPER_MODE_HOST); - sii8620_write_seq_static(ctx, - REG_TDMLLCTL, 0, - REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST | - BIT_UTSRST_KEEPER_SRST | BIT_UTSRST_FC_SRST, - REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST, - REG_HRXINTL, 0xff, - REG_HRXINTH, 0xff, - REG_TTXINTL, 0xff, - REG_TTXINTH, 0xff, - REG_TRXINTL, 0xff, - REG_TRXINTH, 0xff, - REG_HTXINTL, 0xff, - REG_HTXINTH, 0xff, - REG_FCINTR0, 0xff, - REG_FCINTR1, 0xff, - REG_FCINTR2, 0xff, - REG_FCINTR3, 0xff, - REG_FCINTR4, 0xff, - REG_FCINTR5, 0xff, - REG_FCINTR6, 0xff, - REG_FCINTR7, 0xff - ); -} - static void sii8620_edid_read(struct sii8620 *ctx, int ret) { if (ret < 0) return; sii8620_set_upstream_edid(ctx); - sii8620_hsic_init(ctx); sii8620_enable_hpd(ctx); } From c7d6d511eb56495f065600c90336da0f0fe1b174 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Tue, 23 Jan 2018 12:13:16 +0100 Subject: [PATCH 07/10] drm/bridge/sii8620: fix HDMI cable connection to dongle MHL bridge is usually connected to TV via MHL dongle. Currently plugging HDMI cable to dongle is handled improperly. Fix it by splitting connecting of a dongle and a HDMI cable. The driver should now handle unplugging a sink from a dongle and plugging a different sink with new edid. Tested on MHL1, MHL2 and MHL3 using various vendors' dongles both in DVI and HDMI mode. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1516705996-8928-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 65 ++++++++++++++++++---------- 1 file changed, 42 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index ff041bec0cf4..4a3deeda065c 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -83,6 +83,9 @@ struct sii8620 { u8 devcap[MHL_DCAP_SIZE]; u8 xdevcap[MHL_XDC_SIZE]; u8 avif[HDMI_INFOFRAME_SIZE(AVI)]; + bool feature_complete; + bool devcap_read; + bool sink_detected; struct edid *edid; unsigned int gen2_write_burst:1; enum sii8620_mt_state mt_state; @@ -479,7 +482,7 @@ static void sii8620_update_array(u8 *dst, u8 *src, int count) } } -static void sii8620_sink_detected(struct sii8620 *ctx, int ret) +static void sii8620_identify_sink(struct sii8620 *ctx) { static const char * const sink_str[] = { [SINK_NONE] = "NONE", @@ -490,7 +493,7 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) char sink_name[20]; struct device *dev = ctx->dev; - if (ret < 0) + if (!ctx->sink_detected || !ctx->devcap_read) return; sii8620_fetch_edid(ctx); @@ -499,6 +502,7 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) sii8620_mhl_disconnected(ctx); return; } + sii8620_set_upstream_edid(ctx); if (drm_detect_hdmi_monitor(ctx->edid)) ctx->sink_type = SINK_HDMI; @@ -511,15 +515,6 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret) sink_str[ctx->sink_type], sink_name); } -static void sii8620_edid_read(struct sii8620 *ctx, int ret) -{ - if (ret < 0) - return; - - sii8620_set_upstream_edid(ctx); - sii8620_enable_hpd(ctx); -} - static void sii8620_mr_devcap(struct sii8620 *ctx) { u8 dcap[MHL_DCAP_SIZE]; @@ -535,6 +530,8 @@ static void sii8620_mr_devcap(struct sii8620 *ctx) dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L], dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]); sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE); + ctx->devcap_read = true; + sii8620_identify_sink(ctx); } static void sii8620_mr_xdevcap(struct sii8620 *ctx) @@ -1506,6 +1503,16 @@ static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode) ); } +static void sii8620_hpd_unplugged(struct sii8620 *ctx) +{ + sii8620_disable_hpd(ctx); + ctx->sink_type = SINK_NONE; + ctx->sink_detected = false; + ctx->feature_complete = false; + kfree(ctx->edid); + ctx->edid = NULL; +} + static void sii8620_disconnect(struct sii8620 *ctx) { sii8620_disable_gen2_write_burst(ctx); @@ -1533,7 +1540,7 @@ static void sii8620_disconnect(struct sii8620 *ctx) REG_MHL_DP_CTL6, 0x2A, REG_MHL_DP_CTL7, 0x03 ); - sii8620_disable_hpd(ctx); + sii8620_hpd_unplugged(ctx); sii8620_write_seq_static(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE, REG_MHL_COC_CTL1, 0x07, @@ -1581,10 +1588,8 @@ static void sii8620_disconnect(struct sii8620 *ctx) memset(ctx->xstat, 0, sizeof(ctx->xstat)); memset(ctx->devcap, 0, sizeof(ctx->devcap)); memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap)); + ctx->devcap_read = false; ctx->cbus_status = 0; - ctx->sink_type = SINK_NONE; - kfree(ctx->edid); - ctx->edid = NULL; sii8620_mt_cleanup(ctx); } @@ -1675,9 +1680,6 @@ static void sii8620_status_changed_path(struct sii8620 *ctx) sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), MHL_DST_LM_CLK_MODE_NORMAL | MHL_DST_LM_PATH_ENABLED); - if (!sii8620_is_mhl3(ctx)) - sii8620_mt_read_devcap(ctx, false); - sii8620_mt_set_cont(ctx, sii8620_sink_detected); } else { sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), MHL_DST_LM_CLK_MODE_NORMAL); @@ -1694,9 +1696,14 @@ static void sii8620_msc_mr_write_stat(struct sii8620 *ctx) sii8620_update_array(ctx->stat, st, MHL_DST_SIZE); sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE); - if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) + if (ctx->stat[MHL_DST_CONNECTED_RDY] & st[MHL_DST_CONNECTED_RDY] & + MHL_DST_CONN_DCAP_RDY) { sii8620_status_dcap_ready(ctx); + if (!sii8620_is_mhl3(ctx)) + sii8620_mt_read_devcap(ctx, false); + } + if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) sii8620_status_changed_path(ctx); } @@ -1780,8 +1787,11 @@ static void sii8620_msc_mr_set_int(struct sii8620 *ctx) } if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_REQ) sii8620_send_features(ctx); - if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) - sii8620_edid_read(ctx, 0); + if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) { + ctx->feature_complete = true; + if (ctx->edid) + sii8620_enable_hpd(ctx); + } } static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx) @@ -1856,6 +1866,15 @@ static void sii8620_irq_msc(struct sii8620 *ctx) if (stat & BIT_CBUS_MSC_MR_WRITE_STAT) sii8620_msc_mr_write_stat(ctx); + if (stat & BIT_CBUS_HPD_CHG) { + if (ctx->cbus_status & BIT_CBUS_STATUS_CBUS_HPD) { + ctx->sink_detected = true; + sii8620_identify_sink(ctx); + } else { + sii8620_hpd_unplugged(ctx); + } + } + if (stat & BIT_CBUS_MSC_MR_SET_INT) sii8620_msc_mr_set_int(ctx); @@ -1967,11 +1986,11 @@ static void sii8620_irq_ddc(struct sii8620 *ctx) if (stat & BIT_DDC_CMD_DONE) { sii8620_write(ctx, REG_INTR3_MASK, 0); - if (sii8620_is_mhl3(ctx)) + if (sii8620_is_mhl3(ctx) && !ctx->feature_complete) sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_FEAT_REQ); else - sii8620_edid_read(ctx, 0); + sii8620_enable_hpd(ctx); } sii8620_write(ctx, REG_INTR3, stat); } From 9fcf2b3c1c0276650fea537c71b513d27d929b05 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 17 Jun 2018 10:48:22 +0200 Subject: [PATCH 08/10] drm/atmel-hlcdc: check stride values in the first plane The statement always evaluates to true since the struct fields are arrays. This has shown up as a warning when compiling with clang: warning: address of array 'desc->layout.xstride' will always evaluate to 'true' [-Wpointer-bool-conversion] Check for values in the first plane instead. Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: Signed-off-by: Stefan Agner Signed-off-by: Boris Brezillon Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index e18800ed7cd1..7b8191eae68a 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -875,7 +875,7 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane, drm_object_attach_property(&plane->base.base, props->alpha, 255); - if (desc->layout.xstride && desc->layout.pstride) { + if (desc->layout.xstride[0] && desc->layout.pstride[0]) { int ret; ret = drm_plane_create_rotation_property(&plane->base, From 58b3d02f066e5b1480d80bd308c545526eea3250 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Wed, 13 Jun 2018 10:16:47 +0200 Subject: [PATCH 09/10] Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE" This reverts commit 2c17a4368aad2b88b68e4390c819e226cf320f70. The offending commit triggers a run-time fault when accessing the panel element of the sun4i_tcon structure when no such panel is attached. It was apparently assumed in said commit that a panel is always used with the TCON. Although it is often the case, this is not always true. For instance a bridge might be used instead of a panel. This issue was discovered using an A13-OLinuXino, that uses the TCON in RGB mode for a simple DAC-based VGA bridge. Cc: stable@vger.kernel.org Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index c3d92d537240..8045871335b5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -17,7 +17,6 @@ #include #include #include -#include #include @@ -350,9 +349,6 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { - struct drm_panel *panel = tcon->panel; - struct drm_connector *connector = panel->connector; - struct drm_display_info display_info = connector->display_info; unsigned int bp, hsync, vsync; u8 clk_delay; u32 val = 0; @@ -410,27 +406,6 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) - clk_set_phase(tcon->dclk, 240); - - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) - clk_set_phase(tcon->dclk, 0); - regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, val); From e8b92efa629dac0e70ea4145c5e70616de5f89c8 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Tue, 23 Jan 2018 12:17:19 +0100 Subject: [PATCH 10/10] drm/bridge/sii8620: fix display of packed pixel modes in MHL2 Currently packed pixel modes in MHL2 can't be displayed. The device automatically recognizes output format, so setting format other than RGB causes failure. Fix it by writing proper values to registers. Tested on MHL1 and MHL2 using various vendors' dongles both in DVI and HDMI mode. Signed-off-by: Maciej Purski Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1516706239-9104-1-git-send-email-m.purski@samsung.com --- drivers/gpu/drm/bridge/sil-sii8620.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c index 4a3deeda065c..250effa0e6b8 100644 --- a/drivers/gpu/drm/bridge/sil-sii8620.c +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -1017,20 +1017,11 @@ static void sii8620_stop_video(struct sii8620 *ctx) static void sii8620_set_format(struct sii8620 *ctx) { - u8 out_fmt; - if (sii8620_is_mhl3(ctx)) { sii8620_setbits(ctx, REG_M3_P0CTRL, BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED, ctx->use_packed_pixel ? ~0 : 0); } else { - if (ctx->use_packed_pixel) - sii8620_write_seq_static(ctx, - REG_VID_MODE, BIT_VID_MODE_M1080P, - REG_MHL_TOP_CTL, BIT_MHL_TOP_CTL_MHL_PP_SEL | 1, - REG_MHLTX_CTL6, 0x60 - ); - else sii8620_write_seq_static(ctx, REG_VID_MODE, 0, REG_MHL_TOP_CTL, 1, @@ -1038,15 +1029,9 @@ static void sii8620_set_format(struct sii8620 *ctx) ); } - if (ctx->use_packed_pixel) - out_fmt = VAL_TPI_FORMAT(YCBCR422, FULL) | - BIT_TPI_OUTPUT_CSCMODE709; - else - out_fmt = VAL_TPI_FORMAT(RGB, FULL); - sii8620_write_seq(ctx, REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL), - REG_TPI_OUTPUT, out_fmt, + REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL), ); }