hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

Bring in the 'net' tree so that we can get some ipv4/ipv6 bug
fixes that some net-next work will build upon.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2013-01-29 15:32:13 -05:00
parent 218774dc34 fc16e884a2
commit f1e7b73acc
393 changed files with 3574 additions and 1816 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/device-mapper/dm-raid.txt
View File

@ -141,3 +141,4 @@ Version History
1.2.0 Handle creation of arrays that contain failed devices.
1.3.0 Added support for RAID 10
1.3.1 Allow device replacement/rebuild for RAID 10
1.3.2 Fix/improve redundancy checking for RAID10

5
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
View File

@ -81,7 +81,8 @@ PA31 TXD4
Required properties for pin configuration node:
- atmel,pins: 4 integers array, represents a group of pins mux and config
setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
The PERIPH 0 means gpio.
The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
Bits used for CONFIG:
PULL_UP (1 << 0): indicate this pin need a pull up.
@ -126,7 +127,7 @@ pinctrl@fffff400 {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A */
1 15 0x1 0x1>; /* PB15 periph with pullup */
1 15 0x1 0x1>; /* PB15 periph A with pullup */
};
};
};

18
Documentation/filesystems/f2fs.txt
View File

@ -175,9 +175,9 @@ consists of multiple segments as described below.
align with the zone size <-|
|-> align with the segment size
_________________________________________________________________________
| | | Node | Segment | Segment | |
| Superblock | Checkpoint | Address | Info. | Summary | Main |
| (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | |
| | | Segment | Node | Segment | |
| Superblock | Checkpoint | Info. | Address | Summary | Main |
| (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | |
|____________|_____2______|______N______|______N______|______N_____|__N___|
. .
. .
@ -200,14 +200,14 @@ consists of multiple segments as described below.
: It contains file system information, bitmaps for valid NAT/SIT sets, orphan
inode lists, and summary entries of current active segments.
- Node Address Table (NAT)
: It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Information Table (SIT)
: It contains segment information such as valid block count and bitmap for the
validity of all the blocks.
- Node Address Table (NAT)
: It is composed of a block address table for all the node blocks stored in
Main area.
- Segment Summary Area (SSA)
: It contains summary entries which contains the owner information of all the
data and node blocks stored in Main area.
@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
valid, as shown as below.
+--------+----------+---------+
| CP | NAT | SIT |
| CP | SIT | NAT |
+--------+----------+---------+
. . . .
. . . .
. . . .
+-------+-------+--------+--------+--------+--------+
| CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
| CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
+-------+-------+--------+--------+--------+--------+
| ^ ^
| | |

27
MAINTAINERS
View File

@ -1972,9 +1972,9 @@ S: Maintained
F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
S: Odd Fixes
F: sound/soc/codecs/cs4270*
CLEANCACHE API
@ -2966,7 +2966,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -3186,9 +3186,9 @@ F: include/uapi/video/
F: include/uapi/linux/fb.h
FREESCALE DIU FRAMEBUFFER DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: linux-fbdev@vger.kernel.org
S: Supported
S: Maintained
F: drivers/video/fsl-diu-fb.*
FREESCALE DMA DRIVER
@ -3223,9 +3223,8 @@ F: drivers/net/ethernet/freescale/fs_enet/
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Orphan
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
@ -3244,16 +3243,16 @@ S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Maintained
F: drivers/tty/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
M: Timur Tabi <timur@freescale.com>
M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@lists.ozlabs.org
S: Supported
S: Maintained
F: sound/soc/fsl/fsl*
F: sound/soc/fsl/mpc8610_hpcd.c
@ -4901,7 +4900,7 @@ S: Maintained
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -5176,7 +5175,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -6574,7 +6573,7 @@ F: drivers/media/platform/s3c-camif/
F: include/media/s3c_camif.h
SERIAL DRIVERS
M: Alan Cox <alan@linux.intel.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial

4
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Terrified Chipmunk
# *DOCUMENTATION*
@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ )
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------

2
arch/arm/boot/dts/armada-370-db.dts
View File

@ -26,7 +26,7 @@
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {

14
arch/arm/boot/dts/armada-xp-mv78230.dtsi
View File

@ -50,27 +50,25 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>;
interrupts = <87>, <88>, <89>;
};
};
};

21
arch/arm/boot/dts/armada-xp-mv78260.dtsi
View File

@ -51,39 +51,36 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018180 0x40>,
<0xd0018870 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <24>;
interrupts = <91>;
};
ethernet@d0034000 {

21
arch/arm/boot/dts/armada-xp-mv78460.dtsi
View File

@ -66,39 +66,36 @@
};
gpio0: gpio@d0018100 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018100 0x40>,
<0xd0018800 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <16>, <17>, <18>, <19>;
interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018140 0x40>,
<0xd0018840 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
compatible = "marvell,armadaxp-gpio";
reg = <0xd0018180 0x40>,
<0xd0018870 0x30>;
compatible = "marvell,orion-gpio";
reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
interrupts = <24>;
interrupts = <91>;
};
ethernet@d0034000 {

4
arch/arm/boot/dts/at91rm9200.dtsi
View File

@ -336,8 +336,8 @@
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */
&pioA 24 0 /* scl */
gpios = <&pioA 25 0 /* sda */
&pioA 26 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;

18
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -306,6 +306,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0 /* PB17 periph A */
1 18 0x1 0x0>; /* PB18 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 19 0x1 0x0 /* PB19 periph A */
1 20 0x1 0x0 /* PB20 periph A */
1 21 0x1 0x0>; /* PB21 periph A */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -450,6 +466,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};

36
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -271,6 +271,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 0 0x2 0x0 /* PB0 periph B */
1 1 0x2 0x0 /* PB1 periph B */
1 2 0x2 0x0>; /* PB2 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 3 0x2 0x0 /* PB3 periph B */
1 4 0x2 0x0 /* PB4 periph B */
1 5 0x2 0x0>; /* PB5 periph B */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -368,6 +400,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -375,6 +409,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

36
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -290,6 +290,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<3 0 0x1 0x0 /* PD0 periph A */
3 1 0x1 0x0 /* PD1 periph A */
3 2 0x1 0x0>; /* PD2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<3 3 0x1 0x0 /* PD3 periph A */
3 4 0x1 0x0 /* PD4 periph A */
3 5 0x1 0x0>; /* PD5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A */
3 11 0x1 0x0 /* PD11 periph A */
3 12 0x1 0x0>; /* PD12 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<3 13 0x1 0x0 /* PD13 periph A */
3 14 0x1 0x0 /* PD14 periph A */
3 15 0x1 0x0>; /* PD15 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -425,6 +457,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -432,6 +466,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

26
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -28,6 +28,7 @@
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
};
cpus {
cpu@0 {
@ -244,6 +245,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -294,6 +311,15 @@
status = "disabled";
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;

92
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -88,13 +88,6 @@
interrupts = <1 4 7>;
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
status = "disabled";
};
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
@ -150,6 +143,11 @@
atmel,pins =
<0 3 0x1 0x0>; /* PA3 periph A */
};
pinctrl_usart0_sck: usart0_sck-0 {
atmel,pins =
<0 4 0x1 0x0>; /* PA4 periph A */
};
};
usart1 {
@ -161,12 +159,17 @@
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
<3 27 0x3 0x0>; /* PC27 periph C */
<2 27 0x3 0x0>; /* PC27 periph C */
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
<3 28 0x3 0x0>; /* PC28 periph C */
<2 28 0x3 0x0>; /* PC28 periph C */
};
pinctrl_usart1_sck: usart1_sck-0 {
atmel,pins =
<2 28 0x3 0x0>; /* PC29 periph C */
};
};
@ -179,46 +182,56 @@
pinctrl_uart2_rts: uart2_rts-0 {
atmel,pins =
<0 0 0x2 0x0>; /* PB0 periph B */
<1 0 0x2 0x0>; /* PB0 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
atmel,pins =
<0 1 0x2 0x0>; /* PB1 periph B */
<1 1 0x2 0x0>; /* PB1 periph B */
};
pinctrl_usart2_sck: usart2_sck-0 {
atmel,pins =
<1 2 0x2 0x0>; /* PB2 periph B */
};
};
usart3 {
pinctrl_uart3: usart3-0 {
atmel,pins =
<3 23 0x2 0x1 /* PC22 periph B with pullup */
3 23 0x2 0x0>; /* PC23 periph B */
<2 23 0x2 0x1 /* PC22 periph B with pullup */
2 23 0x2 0x0>; /* PC23 periph B */
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<3 24 0x2 0x0>; /* PC24 periph B */
<2 24 0x2 0x0>; /* PC24 periph B */
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<3 25 0x2 0x0>; /* PC25 periph B */
<2 25 0x2 0x0>; /* PC25 periph B */
};
pinctrl_usart3_sck: usart3_sck-0 {
atmel,pins =
<2 26 0x2 0x0>; /* PC26 periph B */
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<3 8 0x3 0x0 /* PC8 periph C */
3 9 0x3 0x1>; /* PC9 periph C with pullup */
<2 8 0x3 0x0 /* PC8 periph C */
2 9 0x3 0x1>; /* PC9 periph C with pullup */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<3 16 0x3 0x0 /* PC16 periph C */
3 17 0x3 0x1>; /* PC17 periph C with pullup */
<2 16 0x3 0x0 /* PC16 periph C */
2 17 0x3 0x1>; /* PC17 periph C with pullup */
};
};
@ -247,14 +260,14 @@
pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
atmel,pins =
<1 8 0x1 0x0 /* PA8 periph A */
1 11 0x1 0x0 /* PA11 periph A */
1 12 0x1 0x0 /* PA12 periph A */
1 13 0x1 0x0 /* PA13 periph A */
1 14 0x1 0x0 /* PA14 periph A */
1 15 0x1 0x0 /* PA15 periph A */
1 16 0x1 0x0 /* PA16 periph A */
1 17 0x1 0x0>; /* PA17 periph A */
<1 8 0x1 0x0 /* PB8 periph A */
1 11 0x1 0x0 /* PB11 periph A */
1 12 0x1 0x0 /* PB12 periph A */
1 13 0x1 0x0 /* PB13 periph A */
1 14 0x1 0x0 /* PB14 periph A */
1 15 0x1 0x0 /* PB15 periph A */
1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0>; /* PB17 periph A */
};
};
@ -290,6 +303,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -333,6 +362,15 @@
};
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;

12
arch/arm/boot/dts/cros5250-common.dtsi
View File

@ -96,8 +96,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -120,8 +120,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -141,8 +141,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;

14
arch/arm/boot/dts/dove-cubox.dts
View File

@ -26,10 +26,15 @@
};
&uart0 { status = "okay"; };
&sdio0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };
&sdio0 {
status = "okay";
/* sdio0 card detect is connected to wrong pin on CuBox */
cd-gpios = <&gpio0 12 1>;
};
&spi0 {
status = "okay";
@ -42,9 +47,14 @@
};
&pinctrl {
pinctrl-0 = <&pmx_gpio_18>;
pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
pinctrl-names = "default";
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";

8
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -115,8 +115,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
@ -139,8 +139,8 @@
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;

16
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
View File

@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
chosen {
@ -6,6 +7,21 @@
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
&pmx_ns2_sata0 &pmx_ns2_sata1>;
pinctrl-names = "default";
pmx_ns2_sata0: pmx-ns2-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
pmx_ns2_sata1: pmx-ns2-sata1 {
marvell,pins = "mpp20";
marvell,function = "sata1";
};
};
serial@12000 {
clock-frequency = <166666667>;
status = "okay";

2
arch/arm/boot/dts/kirkwood.dtsi
View File

@ -36,6 +36,7 @@
reg = <0x10100 0x40>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
};
@ -46,6 +47,7 @@
reg = <0x10140 0x40>;
ngpios = <18>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
};

2
arch/arm/boot/dts/kizbox.dts
View File

@ -48,6 +48,8 @@
macb0: ethernet@fffc4000 {
phy-mode = "mii";
pinctrl-0 = <&pinctrl_macb_rmii
&pinctrl_macb_rmii_mii_alt>;
status = "okay";
};

6
arch/arm/boot/dts/sunxi.dtsi
View File

@ -60,19 +60,21 @@
};
uart0: uart@01c28000 {
compatible = "ns8250";
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};
uart1: uart@01c28400 {
compatible = "ns8250";
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};

2
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
View File

@ -45,7 +45,6 @@
reg = <1>;
};
/* A7s disabled till big.LITTLE patches are available...
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -63,7 +62,6 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
};
*/
};
memory@80000000 {

3
arch/arm/configs/at91_dt_defconfig
View File

@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

2
arch/arm/kernel/debug.S
View File

@ -100,12 +100,14 @@ ENTRY(printch)
b 1b
ENDPROC(printch)
#ifdef CONFIG_MMU
ENTRY(debug_ll_addr)
addruart r2, r3, ip
str r2, [r0]
str r3, [r1]
mov pc, lr
ENDPROC(debug_ll_addr)
#endif
#else

5
arch/arm/kernel/head.S
View File

@ -246,6 +246,7 @@ __create_page_tables:
/*
* Then map boot params address in r2 if specified.
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
@ -253,6 +254,8 @@ __create_page_tables:
addne r3, r3, #PAGE_OFFSET
addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
#ifdef CONFIG_DEBUG_LL
@ -331,7 +334,7 @@ ENTRY(secondary_startup)
* as it has already been validated by the primary processor.
*/
#ifdef CONFIG_ARM_VIRT_EXT
bl __hyp_stub_install
bl __hyp_stub_install_secondary
#endif
safe_svcmode_maskall r9

18
arch/arm/kernel/hyp-stub.S
View File

@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
* immediately.
*/
compare_cpu_mode_with_primary r4, r5, r6, r7
bxne lr
movne pc, lr
/*
* Once we have given up on one CPU, we do not try to install the
@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
*/
cmp r4, #HYP_MODE
bxne lr @ give up if the CPU is not in HYP mode
movne pc, lr @ give up if the CPU is not in HYP mode
/*
* Configure HSCTLR to set correct exception endianness/instruction set
@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
* Eventually, CPU-specific code might be needed -- assume not for now
*
* This code relies on the "eret" instruction to synchronize the
* various coprocessor accesses.
* various coprocessor accesses. This is done when we switch to SVC
* (see safe_svcmode_maskall).
*/
@ Now install the hypervisor stub:
adr r7, __hyp_stub_vectors
@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE
1:
#endif
bic r7, r4, #MODE_MASK
orr r7, r7, #SVC_MODE
THUMB( orr r7, r7, #PSR_T_BIT )
msr spsr_cxsf, r7 @ This is SPSR_hyp.
__MSR_ELR_HYP(14) @ msr elr_hyp, lr
__ERET @ return, switching to SVC mode
@ The boot CPU mode is left in r4.
bx lr @ The boot CPU mode is left in r4.
ENDPROC(__hyp_stub_install_secondary)
__hyp_stub_do_trap:
@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
@ fall through
ENTRY(__hyp_set_vectors)
__HVC(0)
bx lr
mov pc, lr
ENDPROC(__hyp_set_vectors)
#ifndef ZIMAGE

2
arch/arm/mach-at91/setup.c
View File

@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;

1
arch/arm/mach-imx/Kconfig
View File

@ -851,6 +851,7 @@ config SOC_IMX6Q
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL

6
arch/arm/mach-imx/clk-imx25.c
View File

@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");

6
arch/arm/mach-imx/clk-imx27.c
View File

@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");

6
arch/arm/mach-imx/clk-imx31.c
View File

@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");

6
arch/arm/mach-imx/clk-imx35.c
View File

@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");

6
arch/arm/mach-imx/clk-imx51-imx53.c
View File

@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");

3
arch/arm/mach-imx/clk-imx6q.c
View File

@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);

1
arch/arm/mach-imx/common.h
View File

@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
extern void imx_cpu_die(unsigned int cpu);
extern int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);

1
arch/arm/mach-imx/devices/devices-common.h
View File

@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};

15
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
View File

@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX25);
imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27);
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX31);
imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35);
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX51);
imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}

2
arch/arm/mach-imx/devices/platform-imx-fb.c
View File

@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("imx-fb", 0,
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}

12
arch/arm/mach-imx/hotplug.c
View File

@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
/* spin here until hardware takes it down */
while (1)
;
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
imx_enable_cpu(cpu, false);
return 1;
}

3
arch/arm/mach-imx/iram_alloc.c
View File

@ -22,8 +22,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/genalloc.h>
#include "iram.h"
#include "linux/platform_data/imx-iram.h"
static unsigned long iram_phys_base;
static void __iomem *iram_virt_base;

1
arch/arm/mach-imx/platsmp.c
View File

@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = {
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
.cpu_kill = imx_cpu_kill,
#endif
};

1
arch/arm/mach-imx/pm-imx6q.c
View File

@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
imx_gpc_post_resume();
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
return -EINVAL;

14
arch/arm/mach-integrator/pci_v3.c
View File

@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
if (!ap_syscon_base)
return -EINVAL;
if (nr == 0) {
sys->mem_offset = PHYS_PCI_MEM_BASE;
ret = pci_v3_setup_resources(sys);
/* Remap the Integrator system controller */
ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base)
return -EINVAL;
}
return ret;
@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
unsigned int temp;
int ret;
/* Remap the Integrator system controller */
ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base) {
pr_err("unable to remap the AP syscon for PCIv3\n");
return;
}
pcibios_min_mem = 0x00100000;
/*

38
arch/arm/mach-kirkwood/board-ns2.c
View File

@ -18,47 +18,11 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data ns2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static unsigned int ns2_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Fan speed (bit 1) */
MPP8_TW0_SDA,
MPP9_TW0_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Red led */
MPP14_GPIO, /* USB fuse */
MPP16_GPIO, /* SATA 0 power */
MPP17_GPIO, /* SATA 1 power */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_GPIO, /* Fan speed (bit 0) */
MPP23_GPIO, /* Fan power */
MPP24_GPIO, /* USB mode select */
MPP25_GPIO, /* Fan rotation fail */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
#define NS2_GPIO_POWER_OFF 31
static void ns2_power_off(void)
@ -71,8 +35,6 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(ns2_mpp_config);
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);

2
arch/arm/mach-mvebu/Makefile
View File

@ -1,6 +1,8 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o

6
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
/* UART2 - BT/FM/GPS shared transport */
OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};

2
arch/arm/mach-omap2/cclock2420_data.c
View File

@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
omap2xxx_clkt_vps_late_init();
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,

2
arch/arm/mach-omap2/cclock2430_data.c
View File

@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
omap2xxx_clkt_vps_late_init();
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,

13
arch/arm/mach-omap2/cclock44xx_data.c
View File

@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
* Lock the ABE DPLL in any case to avoid issues with audio.
*/
if (cpu_is_omap446x()) {
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
}
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
return 0;
}

2
arch/arm/mach-omap2/devices.c
View File

@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
return cnt;
}
static void omap_init_ocp2scp(void)
static void __init omap_init_ocp2scp(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;

3
arch/arm/mach-omap2/drm.c
View File

@ -25,6 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_data/omap_drm.h>
#include "soc.h"
#include "omap_device.h"
#include "omap_hwmod.h"
@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
oh->name);
}
platform_data.omaprev = GET_OMAP_REVISION();
platform_data.omaprev = GET_OMAP_TYPE;
return platform_device_register(&omap_drm_device);

6
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
* currently reset very early during boot, before I2C is
* available, so it doesn't seem that we have any choice in
* the kernel other than to avoid resetting it.
*
* Also, McPDM needs to be configured to NO_IDLE mode when it
* is in used otherwise vital clocks will be gated which
* results 'slow motion' audio playback.
*/
.flags = HWMOD_EXT_OPT_MAIN_CLK,
.flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",

8
arch/arm/mach-omap2/timer.c
View File

@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
struct device_node *np;
for_each_matching_node(np, match) {
if (!of_device_is_available(np)) {
of_node_put(np);
if (!of_device_is_available(np))
continue;
}
if (property && !of_get_property(np, property, NULL)) {
of_node_put(np);
if (property && !of_get_property(np, property, NULL))
continue;
}
of_add_property(np, &device_disabled);
return np;

2
arch/arm/mach-s3c64xx/mach-crag6410-module.c
View File

@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
.irq = S3C_EINT(5),
.irq = S3C_EINT(4),
.controller_data = &wm0010_spi_csinfo,
.platform_data = &wm0010_pdata,
},

2
arch/arm/mach-s3c64xx/pm.c
View File

@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
#ifdef CONFIG_S3C_DEV_FB
if (dev_get_platdata(&s3c_device_fb.dev))
pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
#endif
return 0;
}

18
arch/arm/mm/dma-mapping.c
View File

@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
size_t size, enum dma_data_direction dir,
void (*op)(const void *, size_t, int))
{
unsigned long pfn;
size_t left = size;
pfn = page_to_pfn(page) + offset / PAGE_SIZE;
offset %= PAGE_SIZE;
/*
* A single sg entry may refer to multiple physically contiguous
* pages. But we still need to process highmem pages individually.
* If highmem is not configured then the bulk of this loop gets
* optimized out.
*/
size_t left = size;
do {
size_t len = left;
void *vaddr;
page = pfn_to_page(pfn);
if (PageHighMem(page)) {
if (len + offset > PAGE_SIZE) {
if (offset >= PAGE_SIZE) {
page += offset / PAGE_SIZE;
offset %= PAGE_SIZE;
}
if (len + offset > PAGE_SIZE)
len = PAGE_SIZE - offset;
}
vaddr = kmap_high_get(page);
if (vaddr) {
vaddr += offset;
@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
op(vaddr, len, dir);
}
offset = 0;
page++;
pfn++;
left -= len;
} while (left);
}

2
arch/arm/mm/mmu.c
View File

@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
},
[MT_MEMORY_SO] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_MT_UNCACHED,
L_PTE_MT_UNCACHED | L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
PMD_SECT_UNCACHED | PMD_SECT_XN,

2
arch/arm/plat-versatile/headsmp.S
View File

@ -20,7 +20,7 @@
*/
ENTRY(versatile_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
bic r0, #0xff000000
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5

6
arch/arm/vfp/entry.S
View File

@ -22,7 +22,7 @@
@ IRQs disabled.
@
ENTRY(do_vfp)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
add r11, r4, #1 @ increment it
str r11, [r10, #TI_PREEMPT]
@ -35,7 +35,7 @@ ENTRY(do_vfp)
ENDPROC(do_vfp)
ENTRY(vfp_null_entry)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it
@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
__INIT
ENTRY(vfp_testing_entry)
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it

4
arch/arm/vfp/vfphw.S
View File

@ -168,7 +168,7 @@ vfp_hw_state_valid:
@ else it's one 32-bit instruction, so
@ always subtract 4 from the following
@ instruction address.
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it
@ -192,7 +192,7 @@ look_for_VFP_exceptions:
@ not recognised by VFP
DBGSTR "not VFP"
#ifdef CONFIG_PREEMPT
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
sub r11, r4, #1 @ decrement it

5
arch/arm64/include/asm/elf.h
View File

@ -26,7 +26,10 @@
typedef unsigned long elf_greg_t;
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
#define ELF_CORE_COPY_REGS(dest, regs) \
*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_fpsimd_state elf_fpregset_t;

36
arch/arm64/include/asm/pgtable.h
View File

@ -24,7 +24,8 @@
/*
* Software defined PTE bits definition.
*/
#define PTE_VALID (_AT(pteval_t, 1) << 0) /* pte_present() check */
#define PTE_VALID (_AT(pteval_t, 1) << 0)
#define PTE_PROT_NONE (_AT(pteval_t, 1) << 1) /* only when !PTE_VALID */
#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */
#define PTE_DIRTY (_AT(pteval_t, 1) << 55)
#define PTE_SPECIAL (_AT(pteval_t, 1) << 56)
@ -60,9 +61,12 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
extern pgprot_t pgprot_default;
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
#define __pgprot_modify(prot,mask,bits) \
__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
#define _MOD_PROT(p, b) __pgprot_modify(p, 0, b)
#define PAGE_NONE __pgprot_modify(pgprot_default, PTE_TYPE_MASK, PTE_PROT_NONE)
#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
@ -72,7 +76,7 @@ extern pgprot_t pgprot_default;
#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
#define __PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE)
#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
@ -125,16 +129,15 @@ extern struct page *empty_zero_page;
/*
* The following only work if pte_present(). Undefined behaviour otherwise.
*/
#define pte_present(pte) (pte_val(pte) & PTE_VALID)
#define pte_present(pte) (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))
#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & PTE_AF)
#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL)
#define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY))
#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
#define pte_present_exec_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
(PTE_VALID | PTE_USER))
#define pte_valid_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@ -157,10 +160,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
if (pte_present_exec_user(pte))
__sync_icache_dcache(pte, addr);
if (!pte_dirty(pte))
pte = pte_wrprotect(pte);
if (pte_valid_user(pte)) {
if (pte_exec(pte))
__sync_icache_dcache(pte, addr);
if (!pte_dirty(pte))
pte = pte_wrprotect(pte);
}
set_pte(ptep, pte);
}
@ -170,9 +176,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
#define pte_huge(pte) ((pte_val(pte) & PTE_TYPE_MASK) == PTE_TYPE_HUGEPAGE)
#define pte_mkhuge(pte) (__pte((pte_val(pte) & ~PTE_TYPE_MASK) | PTE_TYPE_HUGEPAGE))
#define __pgprot_modify(prot,mask,bits) \
__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
#define __HAVE_ARCH_PTE_SPECIAL
/*
@ -264,7 +267,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_VALID;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}

7
arch/arm64/include/asm/unistd32.h
View File

@ -395,8 +395,13 @@ __SYSCALL(370, sys_name_to_handle_at)
__SYSCALL(371, compat_sys_open_by_handle_at)
__SYSCALL(372, compat_sys_clock_adjtime)
__SYSCALL(373, sys_syncfs)
__SYSCALL(374, compat_sys_sendmmsg)
__SYSCALL(375, sys_setns)
__SYSCALL(376, compat_sys_process_vm_readv)
__SYSCALL(377, compat_sys_process_vm_writev)
__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */
#define __NR_compat_syscalls 374
#define __NR_compat_syscalls 379
/*
* Compat syscall numbers used by the AArch64 kernel.

4
arch/arm64/kernel/vdso.c
View File

@ -252,10 +252,6 @@ void update_vsyscall(struct timekeeper *tk)
void update_vsyscall_tz(void)
{
++vdso_data->tb_seq_count;
smp_wmb();
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
vdso_data->tz_dsttime = sys_tz.tz_dsttime;
smp_wmb();
++vdso_data->tb_seq_count;
}

2
arch/arm64/kernel/vdso/gettimeofday.S
View File

@ -73,8 +73,6 @@ ENTRY(__kernel_gettimeofday)
/* If tz is NULL, return 0. */
cbz x1, 3f
ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST]
seqcnt_read w9
seqcnt_check w9, 1b
stp w4, w5, [x1, #TZ_MINWEST]
3:
mov x0, xzr

27
arch/ia64/kernel/ptrace.c
View File

@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
read_unlock(&tasklist_lock);
}
static inline int
thread_matches (struct task_struct *thread, unsigned long addr)
{
unsigned long thread_rbs_end;
struct pt_regs *thread_regs;
if (ptrace_check_attach(thread, 0) < 0)
/*
* If the thread is not in an attachable state, we'll
* ignore it. The net effect is that if ADDR happens
* to overlap with the portion of the thread's
* register backing store that is currently residing
* on the thread's kernel stack, then ptrace() may end
* up accessing a stale value. But if the thread
* isn't stopped, that's a problem anyhow, so we're
* doing as well as we can...
*/
return 0;
thread_regs = task_pt_regs(thread);
thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL);
if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end))
return 0;
return 1; /* looks like we've got a winner */
}
/*
* Write f32-f127 back to task->thread.fph if it has been modified.
*/

16
arch/m68k/include/asm/dma-mapping.h
View File

@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t,
extern void dma_free_coherent(struct device *, size_t,
void *, dma_addr_t);
static inline void *dma_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag,
struct dma_attrs *attrs)
{
/* attrs is not supported and ignored */
return dma_alloc_coherent(dev, size, dma_handle, flag);
}
static inline void dma_free_attrs(struct device *dev, size_t size,
void *cpu_addr, dma_addr_t dma_handle,
struct dma_attrs *attrs)
{
/* attrs is not supported and ignored */
dma_free_coherent(dev, size, cpu_addr, dma_handle);
}
static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
{

2
arch/m68k/include/asm/pgtable_no.h
View File

@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp);
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
#define KMAP_START 0
#define KMAP_END 0xffffffff
#include <asm-generic/pgtable.h>

2
arch/m68k/include/asm/unistd.h
View File

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 348
#define NR_syscalls 349
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

1
arch/m68k/include/uapi/asm/unistd.h
View File

@ -353,5 +353,6 @@
#define __NR_process_vm_readv 345
#define __NR_process_vm_writev 346
#define __NR_kcmp 347
#define __NR_finit_module 348
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

1
arch/m68k/kernel/syscalltable.S
View File

@ -368,4 +368,5 @@ ENTRY(sys_call_table)
.long sys_process_vm_readv /* 345 */
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module

8
arch/m68k/mm/init.c
View File

@ -39,6 +39,11 @@
void *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
extern void init_pointer_table(unsigned long ptable);
extern pmd_t *zero_pgtable;
#endif
#ifdef CONFIG_MMU
pg_data_t pg_data_map[MAX_NUMNODES];
@ -69,9 +74,6 @@ void __init m68k_setup_node(int node)
node_set_online(node);
}
extern void init_pointer_table(unsigned long ptable);
extern pmd_t *zero_pgtable;
#else /* CONFIG_MMU */
/*

20
arch/parisc/kernel/entry.S
View File

@ -1865,7 +1865,7 @@ syscall_restore:
/* Are we being ptraced? */
ldw TASK_FLAGS(%r1),%r19
ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
ldi _TIF_SYSCALL_TRACE_MASK,%r2
and,COND(=) %r19,%r2,%r0
b,n syscall_restore_rfi
@ -1978,15 +1978,23 @@ syscall_restore_rfi:
/* sr2 should be set to zero for userspace syscalls */
STREG %r0,TASK_PT_SR2(%r1)
pt_regs_ok:
LDREG TASK_PT_GR31(%r1),%r2
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
ldo 4(%r2),%r2
STREG %r2,TASK_PT_IAOQ1(%r1)
copy %r25,%r16
b intr_restore
nop
copy %r25,%r16
pt_regs_ok:
LDREG TASK_PT_IAOQ0(%r1),%r2
depi 3,31,2,%r2 /* ensure return to user mode. */
STREG %r2,TASK_PT_IAOQ0(%r1)
LDREG TASK_PT_IAOQ1(%r1),%r2
depi 3,31,2,%r2
STREG %r2,TASK_PT_IAOQ1(%r1)
b intr_restore
copy %r25,%r16
.import schedule,code
syscall_do_resched:

6
arch/parisc/kernel/irq.c
View File

@ -410,11 +410,13 @@ void __init init_IRQ(void)
{
local_irq_disable(); /* PARANOID - should already be disabled */
mtctl(~0UL, 23); /* EIRR : clear all pending external intr */
claim_cpu_irqs();
#ifdef CONFIG_SMP
if (!cpu_eiem)
if (!cpu_eiem) {
claim_cpu_irqs();
cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ);
}
#else
claim_cpu_irqs();
cpu_eiem = EIEM_MASK(TIMER_IRQ);
#endif
set_eiem(cpu_eiem); /* EIEM : enable all external intr */

2
arch/parisc/kernel/ptrace.c
View File

@ -26,7 +26,7 @@
#include <asm/asm-offsets.h>
/* PSW bits we allow the debugger to modify */
#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB)
#define USER_PSW_BITS (PSW_N | PSW_B | PSW_V | PSW_CB)
/*
* Called by kernel/ptrace.c when detaching..

4
arch/parisc/kernel/signal.c
View File

@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n",
(unsigned long)ka, sp, frame_size);
/* Align alternate stack and reserve 64 bytes for the signal
handler's frame marker. */
if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
sp = current->sas_ss_sp; /* Stacks grow up! */
sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */
DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp);
return (void __user *) sp; /* Stacks grow up. Fun. */

11
arch/parisc/math-emu/cnv_float.h
View File

@ -347,16 +347,15 @@
Sgl_isinexact_to_fix(sgl_value,exponent)
#define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \
{Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \
{unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH; \
if (exponent <= 31) { \
Dintp1(dresultA) = 0; \
Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \
Dintp1(dresultA) = 0; \
Dintp2(dresultB) = val >> (31 - exponent); \
} \
else { \
Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \
Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \
Dintp1(dresultA) = val >> (63 - exponent); \
Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0; \
} \
Sall(sgl_value) >>= SGL_EXP_LENGTH; /* return to original */ \
}
#define Duint_setzero(dresultA,dresultB) \

2
arch/powerpc/kernel/entry_32.S
View File

@ -439,6 +439,8 @@ ret_from_fork:
ret_from_kernel_thread:
REST_NVGPRS(r1)
bl schedule_tail
li r3,0
stw r3,0(r1)
mtlr r14
mr r3,r15
PPC440EP_ERR42

13
arch/powerpc/kernel/entry_64.S
View File

@ -664,6 +664,19 @@ resume_kernel:
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
/*
* arch_local_irq_restore() from preempt_schedule_irq above may
* enable hard interrupt but we really should disable interrupts
* when we return from the interrupt, and so that we don't get
* interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq

5
arch/powerpc/kernel/kgdb.c
View File

@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
struct thread_info *backup_current_thread_info = \
(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
struct thread_info *backup_current_thread_info;
if (user_mode(regs))
return 0;
backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
/*
* On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
/* Restore current_thread_info lastly. */
memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
kfree(backup_current_thread_info);
return 1;
}

9
arch/powerpc/kernel/time.c
View File

@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
set_dec(DECREMENTER_MAX);
/* Some implementations of hotplug will get timer interrupts while
* offline, just ignore these
* offline, just ignore these and we also need to set
* decrementers_next_tb as MAX to make sure __check_irq_replay
* don't replay timer interrupt when return, otherwise we'll trap
* here infinitely :(
*/
if (!cpu_online(smp_processor_id()))
if (!cpu_online(smp_processor_id())) {
*next_tb = ~(u64)0;
return;
}
/* Conditionally hard-enable interrupts now that the DEC has been
* bumped to its maximum value

2
arch/powerpc/kvm/emulate.c
View File

@ -39,6 +39,7 @@
#define OP_31_XOP_TRAP 4
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_TRAP_64 68
#define OP_31_XOP_DCBF 86
#define OP_31_XOP_LBZX 87
#define OP_31_XOP_STWX 151
#define OP_31_XOP_STBX 215
@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs);
break;
case OP_31_XOP_DCBF:
case OP_31_XOP_DCBI:
/* Do nothing. The guest is performing dcbi because
* hardware DMA is not snooped by the dcache, but

2
arch/powerpc/oprofile/op_model_power4.c
View File

@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
for (pmc = 0; pmc < 4; pmc++) {
psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
<< (OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_MAX_PMC_NUM);
* OPROFILE_PMSEL_FIELD_WIDTH);
psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

7
arch/powerpc/platforms/pasemi/cpufreq.c
View File

@ -236,6 +236,13 @@ out:
static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
/*
* We don't support CPU hotplug. Don't unmap after the system
* has already made it to a running state.
*/
if (system_state != SYSTEM_BOOTING)
return 0;
if (sdcasr_mapbase)
iounmap(sdcasr_mapbase);
if (sdcpwr_mapbase)

4
arch/s390/Makefile
View File

@ -24,8 +24,8 @@ CHECKFLAGS += -D__s390__ -msize-long
else
LD_BFD := elf64-s390
LDFLAGS := -m elf64_s390
KBUILD_AFLAGS_MODULE += -fpic -D__PIC__
KBUILD_CFLAGS_MODULE += -fpic -D__PIC__
KBUILD_AFLAGS_MODULE += -fPIC
KBUILD_CFLAGS_MODULE += -fPIC
KBUILD_CFLAGS += -m64
KBUILD_AFLAGS += -m64
UTS_MACHINE := s390x

5
arch/s390/include/asm/pgtable.h
View File

@ -1387,10 +1387,7 @@ static inline int has_transparent_hugepage(void)
static inline unsigned long pmd_pfn(pmd_t pmd)
{
if (pmd_trans_huge(pmd))
return pmd_val(pmd) >> HPAGE_SHIFT;
else
return pmd_val(pmd) >> PAGE_SHIFT;
return pmd_val(pmd) >> PAGE_SHIFT;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */

28
arch/s390/include/asm/timex.h
View File

@ -128,4 +128,32 @@ static inline unsigned long long get_clock_monotonic(void)
return get_clock_xt() - sched_clock_base_cc;
}
/**
* tod_to_ns - convert a TOD format value to nanoseconds
* @todval: to be converted TOD format value
* Returns: number of nanoseconds that correspond to the TOD format value
*
* Converting a 64 Bit TOD format value to nanoseconds means that the value
* must be divided by 4.096. In order to achieve that we multiply with 125
* and divide by 512:
*
* ns = (todval * 125) >> 9;
*
* In order to avoid an overflow with the multiplication we can rewrite this.
* With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits)
* we end up with
*
* ns = ((2^32 * th + tl) * 125 ) >> 9;
* -> ns = (2^23 * th * 125) + ((tl * 125) >> 9);
*
*/
static inline unsigned long long tod_to_ns(unsigned long long todval)
{
unsigned long long ns;
ns = ((todval >> 32) << 23) * 125;
ns += ((todval & 0xffffffff) * 125) >> 9;
return ns;
}
#endif

2
arch/s390/kernel/time.c
View File

@ -63,7 +63,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long notrace __kprobes sched_clock(void)
{
return (get_clock_monotonic() * 125) >> 9;
return tod_to_ns(get_clock_monotonic());
}
/*

2
arch/s390/kvm/interrupt.c
View File

@ -408,7 +408,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
return 0;
}
sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);

2
arch/s390/kvm/kvm-s390.c
View File

@ -613,7 +613,9 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
kvm_s390_deliver_pending_interrupts(vcpu);
vcpu->arch.sie_block->icptcode = 0;
preempt_disable();
kvm_guest_enter();
preempt_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
trace_kvm_s390_sie_enter(vcpu,

10
arch/sh/boards/mach-ecovec24/setup.c
View File

@ -70,6 +70,16 @@
* OFF-ON : MMC
*/
/*
* FSI - DA7210
*
* it needs amixer settings for playing
*
* amixer set 'HeadPhone' 80
* amixer set 'Out Mixer Left DAC Left' on
* amixer set 'Out Mixer Right DAC Right' on
*/
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };

4
arch/sh/include/asm/elf.h
View File

@ -203,9 +203,9 @@ extern void __kernel_vsyscall;
if (vdso_enabled) \
NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
else \
NEW_AUX_ENT(AT_IGNORE, 0);
NEW_AUX_ENT(AT_IGNORE, 0)
#else
#define VSYSCALL_AUX_ENT
#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
#endif /* CONFIG_VSYSCALL */
#ifdef CONFIG_SH_FPU

2
arch/sh/include/asm/processor_32.h
View File

@ -39,7 +39,7 @@
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
/*
* Bit of SR register

2
arch/sh/include/asm/processor_64.h
View File

@ -47,7 +47,7 @@ pc; })
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
/*
* Bit of SR register

3
arch/sh/include/uapi/asm/unistd_32.h
View File

@ -379,7 +379,8 @@
#define __NR_process_vm_readv 365
#define __NR_process_vm_writev 366
#define __NR_kcmp 367
#define __NR_finit_module 368
#define NR_syscalls 368
#define NR_syscalls 369
#endif /* __ASM_SH_UNISTD_32_H */

3
arch/sh/include/uapi/asm/unistd_64.h
View File

@ -399,7 +399,8 @@
#define __NR_process_vm_readv 376
#define __NR_process_vm_writev 377
#define __NR_kcmp 378
#define __NR_finit_module 379
#define NR_syscalls 379
#define NR_syscalls 380
#endif /* __ASM_SH_UNISTD_64_H */

1
arch/sh/kernel/syscalls_32.S
View File

@ -385,3 +385,4 @@ ENTRY(sys_call_table)
.long sys_process_vm_readv /* 365 */
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module

1
arch/sh/kernel/syscalls_64.S
View File

@ -405,3 +405,4 @@ sys_call_table:
.long sys_process_vm_readv
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module

2
arch/sh/lib/mcount.S
View File

@ -294,6 +294,8 @@ stack_panic:
.align 2
.L_init_thread_union:
.long init_thread_union
.L_ebss:
.long __bss_stop
.Lpanic:
.long panic
.Lpanic_s:

Some files were not shown because too many files have changed in this diff Show More