V4L/DVB (7595): Improve generic support for setting gpio values

em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Mauro Carvalho Chehab 2008-04-17 21:37:31 -03:00
parent acaa4b609f
commit ee6e3a865a
3 changed files with 116 additions and 77 deletions

View File

@ -194,9 +194,6 @@ struct em28xx_board em28xx_boards[] = {
.vmux = TVP5150_SVIDEO,
.amux = 1,
} },
/* gpio's 4, 1, 0 */
.analog_gpio = 0x003d2d,
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS",
@ -445,73 +442,88 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
};
int em28xx_tuner_callback(void *ptr, int command, int arg)
{
int rc = 0, i;
struct em28xx *dev = ptr;
struct gpio_ctl (*gpio_ctl)[MAX_GPIO];
if (dev->tuner_type != TUNER_XC2028)
return 0;
if (command != XC2028_TUNER_RESET)
return 0;
if (dev->mode == EM28XX_ANALOG_MODE)
gpio_ctl = dev->analog_gpio;
else
gpio_ctl = dev->digital_gpio;
/* Send GPIO reset sequences specified at board entry */
for (i = 0; i < MAX_GPIO; i++) {
if (!gpio_ctl[i]->val)
break;
dev->em28xx_write_regs(dev,
gpio_ctl[i]->reg,
&gpio_ctl[i]->val, 1);
if (gpio_ctl[i]->t1)
msleep(gpio_ctl[i]->t1);
if (!gpio_ctl[i]->rst)
continue;
dev->em28xx_write_regs(dev,
gpio_ctl[i]->reg,
&gpio_ctl[i]->rst, 1);
if (gpio_ctl[i]->t2)
msleep(gpio_ctl[i]->t2);
dev->em28xx_write_regs(dev,
gpio_ctl[i]->reg,
&gpio_ctl[i]->val, 1);
if (gpio_ctl[i]->t3)
msleep(gpio_ctl[i]->t3);
}
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
static void em28xx_set_model(struct em28xx *dev)
{
dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
dev->decoder = em28xx_boards[dev->model].decoder;
dev->video_inputs = em28xx_boards[dev->model].vchannels;
dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
dev->has_dvb = em28xx_boards[dev->model].has_dvb;
dev->analog_gpio = &em28xx_boards[dev->model].analog_gpio;
dev->digital_gpio = &em28xx_boards[dev->model].digital_gpio;
}
/* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
void em28xx_pre_card_setup(struct em28xx *dev)
{
em28xx_set_model(dev);
/* request some modules */
switch (dev->model) {
case EM2880_BOARD_TERRATEC_PRODIGY_XS:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
em28xx_write_regs(dev, XCLK_REG, "\x27", 1);
em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1);
em28xx_write_regs(dev, 0x08, "\xff", 1);
em28xx_write_regs(dev, 0x04, "\x00", 1);
msleep(100);
em28xx_write_regs(dev, 0x04, "\x08", 1);
msleep(100);
em28xx_write_regs(dev, 0x08, "\xff", 1);
msleep(50);
em28xx_write_regs(dev, 0x08, "\x2d", 1);
msleep(50);
em28xx_write_regs(dev, 0x08, "\x3d", 1);
break;
}
}
static int em28xx_tuner_callback(void *ptr, int command, int arg)
{
int rc = 0;
struct em28xx *dev = ptr;
if (dev->tuner_type != TUNER_XC2028)
return 0;
switch (command) {
case XC2028_TUNER_RESET:
{
/* GPIO and initialization codes for analog TV and radio
This code should be complemented for DTV, since reset
codes are different.
*/
dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
if (dev->analog_gpio) {
char gpio0 = dev->analog_gpio & 0xff;
char gpio1 = (dev->analog_gpio >> 8) & 0xff;
char gpio4 = dev->analog_gpio >> 24;
if (gpio4) {
dev->em28xx_write_regs(dev, 0x04, &gpio4, 1);
msleep(140);
}
msleep(6);
dev->em28xx_write_regs(dev, 0x08, &gpio0, 1);
msleep(10);
dev->em28xx_write_regs(dev, 0x08, &gpio1, 1);
msleep(5);
}
break;
}
}
return rc;
/* Put xc2028 tuners and demods into a sane state */
if (dev->tuner_type == TUNER_XC2028) {
dev->mode = EM28XX_DIGITAL_MODE;
em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
};
}
static void em28xx_config_tuner(struct em28xx *dev)
@ -634,20 +646,6 @@ static int em28xx_hint_board(struct em28xx *dev)
return -1;
}
static void em28xx_set_model(struct em28xx *dev)
{
dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
dev->decoder = em28xx_boards[dev->model].decoder;
dev->video_inputs = em28xx_boards[dev->model].vchannels;
dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
dev->has_dvb = em28xx_boards[dev->model].has_dvb;
}
/* ----------------------------------------------------------------------- */
void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
{

View File

@ -314,14 +314,36 @@ int em28xx_colorlevels_set_default(struct em28xx *dev)
int em28xx_capture_start(struct em28xx *dev, int start)
{
int ret;
int rc;
/* FIXME: which is the best order? */
/* video registers are sampled by VREF */
if ((ret = em28xx_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00,
0x10)) < 0)
return ret;
rc = em28xx_write_reg_bits(dev, USBSUSP_REG,
start ? 0x10 : 0x00, 0x10);
if (rc < 0)
return rc;
if (!start) {
/* disable video capture */
rc = em28xx_write_regs(dev, VINENABLE_REG, "\x27", 1);
if (rc < 0)
return rc;
}
/* enable video capture */
return em28xx_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1);
rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
if (rc < 0)
return rc;
if (dev->mode == EM28XX_ANALOG_MODE)
rc = em28xx_write_regs(dev, VINENABLE_REG,"\x67", 1);
else
rc = em28xx_write_regs(dev, VINENABLE_REG,"\x37", 1);
if (rc < 0)
return rc;
msleep (6);
return rc;
}
int em28xx_outfmt_set_yuv422(struct em28xx *dev)

View File

@ -218,6 +218,21 @@ enum em28xx_decoder {
EM28XX_SAA7114
};
#define MAX_GPIO 2
struct gpio_ctl {
/* Register to be set */
unsigned char reg;
/* Initial/final value */
unsigned char val;
/* reset value - if set, it will do:
val1 - val2 - val1
*/
unsigned char rst;
/* Sleep times
*/
unsigned int t1, t2, t3;
};
struct em28xx_board {
char *name;
int vchannels;
@ -233,7 +248,8 @@ struct em28xx_board {
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int analog_gpio;
struct gpio_ctl analog_gpio[MAX_GPIO];
struct gpio_ctl digital_gpio[MAX_GPIO];
enum em28xx_decoder decoder;
@ -293,7 +309,6 @@ struct em28xx {
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
unsigned int analog_gpio;
unsigned int is_em2800:1;
unsigned int has_msp34xx:1;
unsigned int has_tda9887:1;
@ -303,6 +318,9 @@ struct em28xx {
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
struct gpio_ctl (*analog_gpio)[MAX_GPIO];
struct gpio_ctl (*digital_gpio)[MAX_GPIO];
int video_inputs; /* number of video inputs */
struct list_head devlist;
@ -443,6 +461,7 @@ extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
extern const unsigned int em28xx_bcount;
void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
int em28xx_tuner_callback(void *ptr, int command, int arg);
/* Provided by em28xx-input.c */
/* TODO: Check if the standard get_key handlers on ir-common can be used */