From 985b1aa05bc47794780ac92eebdaf006a5187afb Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 7 Nov 2010 16:57:12 -0500 Subject: [PATCH 01/39] mmc: Add support for the Marvell Dove SDHCI controller Implement an sdhci-pltfm driver for the controller found in the Marvell Dove SoC. Signed-off-by: Mike Rapoport CC: Saeed Bishara Acked-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 11 ++++++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-dove.c | 70 ++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-pltfm.c | 3 ++ drivers/mmc/host/sdhci-pltfm.h | 1 + 5 files changed, 86 insertions(+) create mode 100644 drivers/mmc/host/sdhci-dove.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d618e8673996..f8fa9efca8ee 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -140,6 +140,17 @@ config MMC_SDHCI_ESDHC_IMX If unsure, say N. +config MMC_SDHCI_DOVE + bool "SDHCI support on Marvell's Dove SoC" + depends on ARCH_DOVE + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Secure Digital Host Controller Interface in + Marvell's Dove SoC. + + If unsure, say N. + config MMC_SDHCI_S3C tristate "SDHCI support on Samsung S3C SoC" depends on MMC_SDHCI && PLAT_SAMSUNG diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 7b645ff43b30..d91364d4bf39 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o sdhci-platform-y := sdhci-pltfm.o sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o +sdhci-platform-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o sdhci-of-y := sdhci-of-core.o diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c new file mode 100644 index 000000000000..2aeef4ffed8c --- /dev/null +++ b/drivers/mmc/host/sdhci-dove.c @@ -0,0 +1,70 @@ +/* + * sdhci-dove.c Support for SDHCI on Marvell's Dove SoC + * + * Author: Saeed Bishara + * Mike Rapoport + * Based on sdhci-cns3xxx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include "sdhci.h" +#include "sdhci-pltfm.h" + +static u16 sdhci_dove_readw(struct sdhci_host *host, int reg) +{ + u16 ret; + + switch (reg) { + case SDHCI_HOST_VERSION: + case SDHCI_SLOT_INT_STATUS: + /* those registers don't exist */ + return 0; + default: + ret = readw(host->ioaddr + reg); + } + return ret; +} + +static u32 sdhci_dove_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + switch (reg) { + case SDHCI_CAPABILITIES: + ret = readl(host->ioaddr + reg); + /* Mask the support for 3.0V */ + ret &= ~SDHCI_CAN_VDD_300; + break; + default: + ret = readl(host->ioaddr + reg); + } + return ret; +} + +static struct sdhci_ops sdhci_dove_ops = { + .read_w = sdhci_dove_readw, + .read_l = sdhci_dove_readl, +}; + +struct sdhci_pltfm_data sdhci_dove_pdata = { + .ops = &sdhci_dove_ops, + .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_FORCE_DMA, +}; diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 0502f89f662b..91c6766c660c 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -169,6 +169,9 @@ static const struct platform_device_id sdhci_pltfm_ids[] = { #endif #ifdef CONFIG_MMC_SDHCI_ESDHC_IMX { "sdhci-esdhc-imx", (kernel_ulong_t)&sdhci_esdhc_imx_pdata }, +#endif +#ifdef CONFIG_MMC_SDHCI_DOVE + { "sdhci-dove", (kernel_ulong_t)&sdhci_dove_pdata }, #endif { }, }; diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index c1bfe48af56a..62118b9f9d0a 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -22,5 +22,6 @@ struct sdhci_pltfm_host { extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata; extern struct sdhci_pltfm_data sdhci_esdhc_imx_pdata; +extern struct sdhci_pltfm_data sdhci_dove_pdata; #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */ From 930e2fe7593b10033c0cd68fb818c3dec365391a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 28 Oct 2010 21:23:53 +0200 Subject: [PATCH 02/39] ARM: dove: Switch SDHCI devices over to "sdhci-dove" driver Signed-off-by: Mike Rapoport CC: Saeed Bishara Acked-by: Wolfram Sang Signed-off-by: Chris Ball --- arch/arm/mach-dove/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index f7a12586a1f5..fe627aba6da7 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -770,7 +770,7 @@ static struct resource dove_sdio0_resources[] = { }; static struct platform_device dove_sdio0 = { - .name = "sdhci-mv", + .name = "sdhci-dove", .id = 0, .dev = { .dma_mask = &sdio_dmamask, @@ -798,7 +798,7 @@ static struct resource dove_sdio1_resources[] = { }; static struct platform_device dove_sdio1 = { - .name = "sdhci-mv", + .name = "sdhci-dove", .id = 1, .dev = { .dma_mask = &sdio_dmamask, From 74b66954ebfcef9bc26d9c377d32fbd46b4ddc32 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Tue, 2 Nov 2010 01:05:37 +0100 Subject: [PATCH 03/39] mmc: mxcmmc: Allow binding a regulator to manage the MMC card voltage This implementation is based on the pxamci.c driver and it will be used to support the mx31_3ds machine. Signed-off-by: Alberto Panizzo Acked-by: Sascha Hauer Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 48 ++++++++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index bdd2cbb87cba..1a7f48c3c554 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -141,10 +142,45 @@ struct mxcmci_host { struct work_struct datawork; spinlock_t lock; + + struct regulator *vcc; }; static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); +static inline void mxcmci_init_ocr(struct mxcmci_host *host) +{ +#ifdef CONFIG_REGULATOR + host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc"); + + if (IS_ERR(host->vcc)) { + host->vcc = NULL; + } else { + host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc); + if (host->pdata && host->pdata->ocr_avail) + dev_warn(mmc_dev(host->mmc), + "pdata->ocr_avail will not be used\n"); + } +#endif + if (host->vcc == NULL) { + /* fall-back to platform data */ + if (host->pdata && host->pdata->ocr_avail) + host->mmc->ocr_avail = host->pdata->ocr_avail; + else + host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + } +} + +static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd) +{ +#ifdef CONFIG_REGULATOR + if (host->vcc) + mmc_regulator_set_ocr(host->vcc, vdd); +#endif + if (host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(host->mmc), vdd); +} + static inline int mxcmci_use_dma(struct mxcmci_host *host) { return host->do_dma; @@ -680,9 +716,9 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; if (host->power_mode != ios->power_mode) { - if (host->pdata && host->pdata->setpower) - host->pdata->setpower(mmc_dev(mmc), ios->vdd); + mxcmci_set_power(host, ios->vdd); host->power_mode = ios->power_mode; + if (ios->power_mode == MMC_POWER_ON) host->cmdat |= CMD_DAT_CONT_INIT; } @@ -807,10 +843,7 @@ static int mxcmci_probe(struct platform_device *pdev) host->pdata = pdev->dev.platform_data; spin_lock_init(&host->lock); - if (host->pdata && host->pdata->ocr_avail) - mmc->ocr_avail = host->pdata->ocr_avail; - else - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mxcmci_init_ocr(host); if (host->pdata && host->pdata->dat3_card_detect) host->default_irq_mask = @@ -915,6 +948,9 @@ static int mxcmci_remove(struct platform_device *pdev) mmc_remove_host(mmc); + if (host->vcc) + regulator_put(host->vcc); + if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); From d078d24242ff6c36338991627f9c63b2d48a6eee Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Tue, 9 Nov 2010 11:35:37 +0100 Subject: [PATCH 04/39] mmc: mxcmmc: update the regulator support code to the latest API This also fixes the build problem introduced by my previous patch due to unhandled API changes introduced by commit: 99fc513101 (mmc: Move regulator handling closer to core) Signed-off-by: Alberto Panizzo Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 1a7f48c3c554..2b9f7c856700 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -150,7 +150,6 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); static inline void mxcmci_init_ocr(struct mxcmci_host *host) { -#ifdef CONFIG_REGULATOR host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc"); if (IS_ERR(host->vcc)) { @@ -161,7 +160,7 @@ static inline void mxcmci_init_ocr(struct mxcmci_host *host) dev_warn(mmc_dev(host->mmc), "pdata->ocr_avail will not be used\n"); } -#endif + if (host->vcc == NULL) { /* fall-back to platform data */ if (host->pdata && host->pdata->ocr_avail) @@ -171,12 +170,17 @@ static inline void mxcmci_init_ocr(struct mxcmci_host *host) } } -static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd) +static inline void mxcmci_set_power(struct mxcmci_host *host, + unsigned char power_mode, + unsigned int vdd) { -#ifdef CONFIG_REGULATOR - if (host->vcc) - mmc_regulator_set_ocr(host->vcc, vdd); -#endif + if (host->vcc) { + if (power_mode == MMC_POWER_UP) + mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); + else if (power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(host->mmc, host->vcc, 0); + } + if (host->pdata && host->pdata->setpower) host->pdata->setpower(mmc_dev(host->mmc), vdd); } @@ -716,7 +720,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; if (host->power_mode != ios->power_mode) { - mxcmci_set_power(host, ios->vdd); + mxcmci_set_power(host, ios->power_mode, ios->vdd); host->power_mode = ios->power_mode; if (ios->power_mode == MMC_POWER_ON) From 17d8020d9a4ee7d5965996ea75636dc3d058963f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 22 Nov 2010 16:47:51 +0800 Subject: [PATCH 05/39] mmc: mxcmmc: remove a unnecessary release_resource() call Remove release_resource() after release_mem_region(). Signed-off-by: Axel Lin Acked-by: Sascha Hauer Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 2b9f7c856700..4428594261c5 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -967,7 +967,6 @@ static int mxcmci_remove(struct platform_device *pdev) clk_put(host->clk); release_mem_region(host->res->start, resource_size(host->res)); - release_resource(host->res); mmc_free_host(mmc); From 26daa1ed40c6b31b4220581431982814c47c608a Mon Sep 17 00:00:00 2001 From: Jennifer Li Date: Wed, 17 Nov 2010 23:01:59 -0500 Subject: [PATCH 06/39] mmc: sdhci: Disable ADMA on some O2Micro SD/MMC parts. This patch disables the broken ADMA on selected O2Micro devices. Signed-off-by: Jennifer Li Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 112 +++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 5 ++ 2 files changed, 117 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 3d9c2460d437..831cf91b644a 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -176,6 +176,74 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, }; +/* O2Micro extra registers */ +#define O2_SD_LOCK_WP 0xD3 +#define O2_SD_MULTI_VCC3V 0xEE +#define O2_SD_CLKREQ 0xEC +#define O2_SD_CAPS 0xE0 +#define O2_SD_ADMA1 0xE2 +#define O2_SD_ADMA2 0xE7 +#define O2_SD_INF_MOD 0xF1 + +static int o2_probe(struct sdhci_pci_chip *chip) +{ + int ret; + u8 scratch; + + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_8220: + case PCI_DEVICE_ID_O2_8221: + case PCI_DEVICE_ID_O2_8320: + case PCI_DEVICE_ID_O2_8321: + /* This extra setup is required due to broken ADMA. */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Set Multi 3 to VCC3V# */ + pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08); + + /* Disable CLK_REQ# support after media DET */ + ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch); + if (ret) + return ret; + scratch |= 0x20; + pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch); + + /* Choose capabilities, enable SDMA. We have to write 0x01 + * to the capabilities register first to unlock it. + */ + ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch); + if (ret) + return ret; + scratch |= 0x01; + pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch); + pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73); + + /* Disable ADMA1/2 */ + pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39); + pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08); + + /* Disable the infinite transfer mode */ + ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch); + if (ret) + return ret; + scratch |= 0x08; + pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + } + + return 0; +} + static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) { u8 scratch; @@ -339,6 +407,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) return 0; } +static const struct sdhci_pci_fixes sdhci_o2 = { + .probe = o2_probe, +}; + static const struct sdhci_pci_fixes sdhci_jmicron = { .probe = jmicron_probe, @@ -589,6 +661,46 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio, }, + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8120, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8220, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8221, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8320, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8321, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cb845c16ad7d..7a58875cdad5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1650,6 +1650,11 @@ #define PCI_DEVICE_ID_O2_6836 0x6836 #define PCI_DEVICE_ID_O2_6812 0x6872 #define PCI_DEVICE_ID_O2_6933 0x6933 +#define PCI_DEVICE_ID_O2_8120 0x8120 +#define PCI_DEVICE_ID_O2_8220 0x8220 +#define PCI_DEVICE_ID_O2_8221 0x8221 +#define PCI_DEVICE_ID_O2_8320 0x8320 +#define PCI_DEVICE_ID_O2_8321 0x8321 #define PCI_VENDOR_ID_3DFX 0x121a #define PCI_DEVICE_ID_3DFX_VOODOO 0x0001 From 04566831a703ae3ef4b49a2deae261c9ed26e020 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 8 Nov 2010 21:36:50 -0500 Subject: [PATCH 07/39] mmc: Aggressive clock gating framework This patch modifies the MMC core code to optionally call the set_ios() operation on the driver with the clock frequency set to 0 (gate) after a grace period of at least 8 MCLK cycles, then restore it (ungate) before any new request. This gives the driver the option to shut down the MCI clock to the MMC/SD card when the clock frequency is 0, i.e. the core has stated that the MCI clock does not need to be generated. It is inspired by existing clock gating code found in the OMAP and Atmel drivers and brings this up to the host abstraction. Gating is performed before and after any MMC request. This patchset implements this for the MMCI/PL180 MMC/SD host controller, but it should be simple to switch OMAP/Atmel over to using this instead. mmc_set_{gated,ungated}() add variable protection to the state holders for the clock gating code. This is particularly important when ordinary .set_ios() calls would race with the .set_ios() call resulting from a delayed gate operation. Signed-off-by: Linus Walleij Reviewed-by: Chris Ball Tested-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/Kconfig | 11 ++ drivers/mmc/core/core.c | 62 ++++++++++- drivers/mmc/core/core.h | 3 + drivers/mmc/core/debugfs.c | 5 + drivers/mmc/core/host.c | 205 ++++++++++++++++++++++++++++++++++++- drivers/mmc/core/host.h | 21 ++++ include/linux/mmc/host.h | 10 ++ 7 files changed, 315 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index bb22ffd76ef8..ef103871517f 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -16,3 +16,14 @@ config MMC_UNSAFE_RESUME This option sets a default which can be overridden by the module parameter "removable=0" or "removable=1". + +config MMC_CLKGATE + bool "MMC host clock gating (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This will attempt to aggressively gate the clock to the MMC card. + This is done to save power due to gating off the logic and bus + noise when the MMC card is not in use. Your host driver has to + support handling this in order for it to be of any use. + + If unsure, say N. diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index a3a780faf85a..722af2dce3bb 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -130,6 +130,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) if (mrq->done) mrq->done(mrq); + + mmc_host_clk_gate(host); } } @@ -190,6 +192,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) mrq->stop->mrq = mrq; } } + mmc_host_clk_ungate(host); host->ops->request(host, mrq); } @@ -296,7 +299,7 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) timeout_us = data->timeout_ns / 1000; timeout_us += data->timeout_clks * 1000 / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); if (data->flags & MMC_DATA_WRITE) /* @@ -614,6 +617,8 @@ static inline void mmc_set_ios(struct mmc_host *host) ios->power_mode, ios->chip_select, ios->vdd, ios->bus_width, ios->timing); + if (ios->clock > 0) + mmc_set_ungated(host); host->ops->set_ios(host, ios); } @@ -641,6 +646,61 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz) mmc_set_ios(host); } +#ifdef CONFIG_MMC_CLKGATE +/* + * This gates the clock by setting it to 0 Hz. + */ +void mmc_gate_clock(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_old = host->ios.clock; + host->ios.clock = 0; + host->clk_gated = true; + spin_unlock_irqrestore(&host->clk_lock, flags); + mmc_set_ios(host); +} + +/* + * This restores the clock from gating by using the cached + * clock value. + */ +void mmc_ungate_clock(struct mmc_host *host) +{ + /* + * We should previously have gated the clock, so the clock shall + * be 0 here! The clock may however be 0 during initialization, + * when some request operations are performed before setting + * the frequency. When ungate is requested in that situation + * we just ignore the call. + */ + if (host->clk_old) { + BUG_ON(host->ios.clock); + /* This call will also set host->clk_gated to false */ + mmc_set_clock(host, host->clk_old); + } +} + +void mmc_set_ungated(struct mmc_host *host) +{ + unsigned long flags; + + /* + * We've been given a new frequency while the clock is gated, + * so make sure we regard this as ungating it. + */ + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_gated = false; + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +#else +void mmc_set_ungated(struct mmc_host *host) +{ +} +#endif + /* * Change the bus mode (open drain/push-pull) of a host. */ diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 77240cd11bcf..026c975b99a9 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -33,6 +33,9 @@ void mmc_init_erase(struct mmc_card *card); void mmc_set_chip_select(struct mmc_host *host, int mode); void mmc_set_clock(struct mmc_host *host, unsigned int hz); +void mmc_gate_clock(struct mmc_host *host); +void mmc_ungate_clock(struct mmc_host *host); +void mmc_set_ungated(struct mmc_host *host); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index eed1405fd742..998797ed67a6 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -183,6 +183,11 @@ void mmc_add_host_debugfs(struct mmc_host *host) &mmc_clock_fops)) goto err_node; +#ifdef CONFIG_MMC_CLKGATE + if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR), + root, &host->clk_delay)) + goto err_node; +#endif return; err_node: diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 10b8af27e03a..92e33703e437 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -3,6 +3,7 @@ * * Copyright (C) 2003 Russell King, All Rights Reserved. * Copyright (C) 2007-2008 Pierre Ossman + * Copyright (C) 2010 Linus Walleij * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,6 +21,7 @@ #include #include +#include #include "core.h" #include "host.h" @@ -50,6 +52,204 @@ void mmc_unregister_host_class(void) static DEFINE_IDR(mmc_host_idr); static DEFINE_SPINLOCK(mmc_host_lock); +#ifdef CONFIG_MMC_CLKGATE + +/* + * Enabling clock gating will make the core call out to the host + * once up and once down when it performs a request or card operation + * intermingled in any fashion. The driver will see this through + * set_ios() operations with ios.clock field set to 0 to gate (disable) + * the block clock, and to the old frequency to enable it again. + */ +static void mmc_host_clk_gate_delayed(struct mmc_host *host) +{ + unsigned long tick_ns; + unsigned long freq = host->ios.clock; + unsigned long flags; + + if (!freq) { + pr_debug("%s: frequency set to 0 in disable function, " + "this means the clock is already disabled.\n", + mmc_hostname(host)); + return; + } + /* + * New requests may have appeared while we were scheduling, + * then there is no reason to delay the check before + * clk_disable(). + */ + spin_lock_irqsave(&host->clk_lock, flags); + + /* + * Delay n bus cycles (at least 8 from MMC spec) before attempting + * to disable the MCI block clock. The reference count may have + * gone up again after this delay due to rescheduling! + */ + if (!host->clk_requests) { + spin_unlock_irqrestore(&host->clk_lock, flags); + tick_ns = DIV_ROUND_UP(1000000000, freq); + ndelay(host->clk_delay * tick_ns); + } else { + /* New users appeared while waiting for this work */ + spin_unlock_irqrestore(&host->clk_lock, flags); + return; + } + mutex_lock(&host->clk_gate_mutex); + spin_lock_irqsave(&host->clk_lock, flags); + if (!host->clk_requests) { + spin_unlock_irqrestore(&host->clk_lock, flags); + /* This will set host->ios.clock to 0 */ + mmc_gate_clock(host); + spin_lock_irqsave(&host->clk_lock, flags); + pr_debug("%s: gated MCI clock\n", mmc_hostname(host)); + } + spin_unlock_irqrestore(&host->clk_lock, flags); + mutex_unlock(&host->clk_gate_mutex); +} + +/* + * Internal work. Work to disable the clock at some later point. + */ +static void mmc_host_clk_gate_work(struct work_struct *work) +{ + struct mmc_host *host = container_of(work, struct mmc_host, + clk_gate_work); + + mmc_host_clk_gate_delayed(host); +} + +/** + * mmc_host_clk_ungate - ungate hardware MCI clocks + * @host: host to ungate. + * + * Makes sure the host ios.clock is restored to a non-zero value + * past this call. Increase clock reference count and ungate clock + * if we're the first user. + */ +void mmc_host_clk_ungate(struct mmc_host *host) +{ + unsigned long flags; + + mutex_lock(&host->clk_gate_mutex); + spin_lock_irqsave(&host->clk_lock, flags); + if (host->clk_gated) { + spin_unlock_irqrestore(&host->clk_lock, flags); + mmc_ungate_clock(host); + spin_lock_irqsave(&host->clk_lock, flags); + pr_debug("%s: ungated MCI clock\n", mmc_hostname(host)); + } + host->clk_requests++; + spin_unlock_irqrestore(&host->clk_lock, flags); + mutex_unlock(&host->clk_gate_mutex); +} + +/** + * mmc_host_may_gate_card - check if this card may be gated + * @card: card to check. + */ +static bool mmc_host_may_gate_card(struct mmc_card *card) +{ + /* If there is no card we may gate it */ + if (!card) + return true; + /* + * Don't gate SDIO cards! These need to be clocked at all times + * since they may be independent systems generating interrupts + * and other events. The clock requests counter from the core will + * go down to zero since the core does not need it, but we will not + * gate the clock, because there is somebody out there that may still + * be using it. + */ + if (mmc_card_sdio(card)) + return false; + + return true; +} + +/** + * mmc_host_clk_gate - gate off hardware MCI clocks + * @host: host to gate. + * + * Calls the host driver with ios.clock set to zero as often as possible + * in order to gate off hardware MCI clocks. Decrease clock reference + * count and schedule disabling of clock. + */ +void mmc_host_clk_gate(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_requests--; + if (mmc_host_may_gate_card(host->card) && + !host->clk_requests) + schedule_work(&host->clk_gate_work); + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +/** + * mmc_host_clk_rate - get current clock frequency setting + * @host: host to get the clock frequency for. + * + * Returns current clock frequency regardless of gating. + */ +unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + unsigned long freq; + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + if (host->clk_gated) + freq = host->clk_old; + else + freq = host->ios.clock; + spin_unlock_irqrestore(&host->clk_lock, flags); + return freq; +} + +/** + * mmc_host_clk_init - set up clock gating code + * @host: host with potential clock to control + */ +static inline void mmc_host_clk_init(struct mmc_host *host) +{ + host->clk_requests = 0; + /* Hold MCI clock for 8 cycles by default */ + host->clk_delay = 8; + host->clk_gated = false; + INIT_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); + spin_lock_init(&host->clk_lock); + mutex_init(&host->clk_gate_mutex); +} + +/** + * mmc_host_clk_exit - shut down clock gating code + * @host: host with potential clock to control + */ +static inline void mmc_host_clk_exit(struct mmc_host *host) +{ + /* + * Wait for any outstanding gate and then make sure we're + * ungated before exiting. + */ + if (cancel_work_sync(&host->clk_gate_work)) + mmc_host_clk_gate_delayed(host); + if (host->clk_gated) + mmc_host_clk_ungate(host); + BUG_ON(host->clk_requests > 0); +} + +#else + +static inline void mmc_host_clk_init(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_exit(struct mmc_host *host) +{ +} + +#endif + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -82,6 +282,8 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->class_dev.class = &mmc_host_class; device_initialize(&host->class_dev); + mmc_host_clk_init(host); + spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); @@ -163,6 +365,8 @@ void mmc_remove_host(struct mmc_host *host) device_del(&host->class_dev); led_trigger_unregister_simple(host->led); + + mmc_host_clk_exit(host); } EXPORT_SYMBOL(mmc_remove_host); @@ -183,4 +387,3 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); - diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 8c87e1109a34..de199f911928 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -10,10 +10,31 @@ */ #ifndef _MMC_CORE_HOST_H #define _MMC_CORE_HOST_H +#include int mmc_register_host_class(void); void mmc_unregister_host_class(void); +#ifdef CONFIG_MMC_CLKGATE +void mmc_host_clk_ungate(struct mmc_host *host); +void mmc_host_clk_gate(struct mmc_host *host); +unsigned int mmc_host_clk_rate(struct mmc_host *host); + +#else +static inline void mmc_host_clk_ungate(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_gate(struct mmc_host *host) +{ +} + +static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + return host->ios.clock; +} +#endif + void mmc_host_deeper_disable(struct work_struct *work); #endif diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 30f6fad99a58..381c77fd4dca 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -172,6 +172,16 @@ struct mmc_host { mmc_pm_flag_t pm_caps; /* supported pm features */ +#ifdef CONFIG_MMC_CLKGATE + int clk_requests; /* internal reference counter */ + unsigned int clk_delay; /* number of MCI clk hold cycles */ + bool clk_gated; /* clock gated */ + struct work_struct clk_gate_work; /* delayed clock gate */ + unsigned int clk_old; /* old clock value cache */ + spinlock_t clk_lock; /* lock for clk fields */ + struct mutex clk_gate_mutex; /* mutex for clock gating */ +#endif + /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ unsigned short max_segs; /* see blk_queue_max_segments */ From e8120ad129c160ff5b2e2b197d025a2cd661c2f2 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Tue, 30 Nov 2010 00:55:23 -0500 Subject: [PATCH 08/39] mmc: sdhci: print SD Command and CAPABILITY_1 when dumping registers More information should be shown when sdhci_dumpregs is called. Knowing the command is useful for debugging, and Capability 1 is useful for SD v3. Signed-off-by: Philip Rakity Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 5 ++++- drivers/mmc/host/sdhci.h | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a25db426c910..8a74fcbfe13b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -77,8 +77,11 @@ static void sdhci_dumpregs(struct sdhci_host *host) printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", sdhci_readw(host, SDHCI_ACMD12_ERR), sdhci_readw(host, SDHCI_SLOT_INT_STATUS)); - printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n", + printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", sdhci_readl(host, SDHCI_CAPABILITIES), + sdhci_readl(host, SDHCI_CAPABILITIES_1)); + printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + sdhci_readw(host, SDHCI_COMMAND), sdhci_readl(host, SDHCI_MAX_CURRENT)); if (host->flags & SDHCI_USE_ADMA) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index e42d7f00c060..1efe7dc5255b 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -165,7 +165,7 @@ #define SDHCI_CAN_VDD_180 0x04000000 #define SDHCI_CAN_64BIT 0x10000000 -/* 44-47 reserved for more caps */ +#define SDHCI_CAPABILITIES_1 0x44 #define SDHCI_MAX_CURRENT 0x48 From 150ee73d1b35936aafc5fd3b39a7291b1f66de07 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 14 Nov 2010 19:04:30 -0800 Subject: [PATCH 09/39] mmc: davinci_mmc: Remove unnecessary semicolon Signed-off-by: Joe Perches Signed-off-by: Chris Ball --- drivers/mmc/host/davinci_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index e15547cf701f..b643ddef4f70 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -480,7 +480,7 @@ static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host, struct scatterlist *sg; unsigned sg_len; unsigned bytes_left = host->bytes_left; - const unsigned shift = ffs(rw_threshold) - 1;; + const unsigned shift = ffs(rw_threshold) - 1; if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { template = &host->tx_template; From 8f230f454fe04ba326ffaead3a6b88dcf44eaf4b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Dec 2010 10:04:30 +0100 Subject: [PATCH 10/39] mmc: Add support for JMicron 388 SD/MMC controller JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for SD, but MMC doesn't work with the low-voltage, resulting in an error at probing. This patch adds the support for multiple voltage mask per device type, so that SD works with 1.8V while MMC forces 3.3V. Here new ocr_avail_* fields for each device are introduced, so that the actual OCR mask is switched dynamically. Also, the restriction of low-voltage in core/sd.c is removed when the bit is allowed explicitly via ocr_avail_sd mask. This patch was rewritten from scratch based on Aries' original code. Signed-off-by: Aries Lee Signed-off-by: Takashi Iwai Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 2 ++ drivers/mmc/core/sd.c | 5 +++- drivers/mmc/core/sdio.c | 2 ++ drivers/mmc/host/sdhci-pci.c | 47 +++++++++++++++++++++++++++++++----- drivers/mmc/host/sdhci.c | 23 ++++++++++++++---- include/linux/mmc/host.h | 3 +++ include/linux/mmc/sdhci.h | 4 +++ include/linux/pci_ids.h | 2 ++ 8 files changed, 76 insertions(+), 12 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 77f93c3b8808..76bb621e9aa9 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -745,6 +745,8 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) WARN_ON(!host->claimed); mmc_attach_bus_ops(host); + if (host->ocr_avail_mmc) + host->ocr_avail = host->ocr_avail_mmc; /* * We need to get OCR a different way for SPI. diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 49da4dffd28e..de062ebd8b26 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -772,6 +772,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) WARN_ON(!host->claimed); mmc_sd_attach_bus_ops(host); + if (host->ocr_avail_sd) + host->ocr_avail = host->ocr_avail_sd; /* * We need to get OCR a different way for SPI. @@ -795,7 +797,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) ocr &= ~0x7F; } - if (ocr & MMC_VDD_165_195) { + if ((ocr & MMC_VDD_165_195) && + !(host->ocr_avail_sd & MMC_VDD_165_195)) { printk(KERN_WARNING "%s: SD card claims to support the " "incompletely defined 'low voltage range'. This " "will be ignored.\n", mmc_hostname(host)); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index efef5f94ac42..c18810ab6465 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -700,6 +700,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) WARN_ON(!host->claimed); mmc_attach_bus(host, &mmc_sdio_ops); + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; /* * Sanity check the voltages that the card claims to diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 831cf91b644a..d2638ffc4ed2 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -272,6 +272,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) static int jmicron_probe(struct sdhci_pci_chip *chip) { int ret; + u16 mmcdev = 0; if (chip->pdev->revision == 0) { chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | @@ -293,12 +294,17 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) * 2. The MMC interface has a lower subfunction number * than the SD interface. */ - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) { + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) + mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC; + else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD) + mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD; + + if (mmcdev) { struct pci_dev *sd_dev; sd_dev = NULL; while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON, - PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) { + mmcdev, sd_dev)) != NULL) { if ((PCI_SLOT(chip->pdev->devfn) == PCI_SLOT(sd_dev->devfn)) && (chip->pdev->bus == sd_dev->bus)) @@ -358,11 +364,21 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot) slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; } + /* JM388 MMC doesn't support 1.8V while SD supports it */ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { + slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 | + MMC_VDD_29_30 | MMC_VDD_30_31 | + MMC_VDD_165_195; /* allow 1.8V */ + slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 | + MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */ + } + /* * The secondary interface requires a bit set to get the * interrupts. */ - if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) jmicron_enable_mmc(slot->host, 1); return 0; @@ -373,7 +389,8 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) if (dead) return; - if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) jmicron_enable_mmc(slot->host, 0); } @@ -381,7 +398,8 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) { int i; - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { for (i = 0;i < chip->num_slots;i++) jmicron_enable_mmc(chip->slots[i]->host, 0); } @@ -393,7 +411,8 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) { int ret, i; - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { for (i = 0;i < chip->num_slots;i++) jmicron_enable_mmc(chip->slots[i]->host, 1); } @@ -581,6 +600,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = (kernel_ulong_t)&sdhci_jmicron, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB388_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB388_ESD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + { .vendor = PCI_VENDOR_ID_SYSKONNECT, .device = 0x8000, diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8a74fcbfe13b..55698864c2cd 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1739,7 +1739,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host); int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; - unsigned int caps; + unsigned int caps, ocr_avail; int ret; WARN_ON(host == NULL); @@ -1893,13 +1893,26 @@ int sdhci_add_host(struct sdhci_host *host) mmc_card_is_removable(mmc)) mmc->caps |= MMC_CAP_NEEDS_POLL; - mmc->ocr_avail = 0; + ocr_avail = 0; if (caps & SDHCI_CAN_VDD_330) - mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34; + ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; if (caps & SDHCI_CAN_VDD_300) - mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31; + ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; if (caps & SDHCI_CAN_VDD_180) - mmc->ocr_avail |= MMC_VDD_165_195; + ocr_avail |= MMC_VDD_165_195; + + mmc->ocr_avail = ocr_avail; + mmc->ocr_avail_sdio = ocr_avail; + if (host->ocr_avail_sdio) + mmc->ocr_avail_sdio &= host->ocr_avail_sdio; + mmc->ocr_avail_sd = ocr_avail; + if (host->ocr_avail_sd) + mmc->ocr_avail_sd &= host->ocr_avail_sd; + else /* normal SD controllers don't support 1.8V */ + mmc->ocr_avail_sd &= ~MMC_VDD_165_195; + mmc->ocr_avail_mmc = ocr_avail; + if (host->ocr_avail_mmc) + mmc->ocr_avail_mmc &= host->ocr_avail_mmc; if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 381c77fd4dca..4a9d9d2589c7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -131,6 +131,9 @@ struct mmc_host { unsigned int f_max; unsigned int f_init; u32 ocr_avail; + u32 ocr_avail_sdio; /* SDIO-specific OCR */ + u32 ocr_avail_sd; /* SD-specific OCR */ + u32 ocr_avail_mmc; /* MMC-specific OCR */ struct notifier_block pm_notify; #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 1fdc673f2396..0d953f513d81 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -139,6 +139,10 @@ struct sdhci_host { unsigned int caps; /* Alternative capabilities */ + unsigned int ocr_avail_sdio; /* OCR bit masks */ + unsigned int ocr_avail_sd; + unsigned int ocr_avail_mmc; + unsigned long private[0] ____cacheline_aligned; }; #endif /* __SDHCI_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7a58875cdad5..2f17b4ccbb58 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2368,6 +2368,8 @@ #define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 #define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383 +#define PCI_DEVICE_ID_JMICRON_JMB388_SD 0x2391 +#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392 #define PCI_VENDOR_ID_KORENIX 0x1982 #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 From 30201e7f3ac639fe98fcd25d40346b65dde9ecba Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 28 Nov 2010 07:21:28 +0200 Subject: [PATCH 11/39] mmc: skip detection of nonremovable cards on rescan mmc_rescan() checks whether registered cards are still present before skipping them, by calling the bus-specific ->detect() handler. With buses that support runtime PM, the card may be powered off at this point, so they need to be powered on and fully reinitialized before ->detect() executes. This whole process is redundant with nonremovable cards; in those cases, we can safely skip calling ->detect() and implicitly assume its success. Signed-off-by: Ohad Ben-Cohen Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 722af2dce3bb..9683d4d3fced 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1506,8 +1506,12 @@ void mmc_rescan(struct work_struct *work) mmc_bus_get(host); - /* if there is a card registered, check whether it is still present */ - if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead) + /* + * if there is a _removable_ card registered, check whether it is + * still present + */ + if (host->bus_ops && host->bus_ops->detect && !host->bus_dead + && mmc_card_is_removable(host)) host->bus_ops->detect(host); mmc_bus_put(host); From e594573d790bd7e269f05955d316b88f7be0c14a Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 28 Nov 2010 07:21:30 +0200 Subject: [PATCH 12/39] mmc: sdio: don't power up cards on system suspend Initial SDIO runtime PM implementation took a conservative approach of powering up cards (and fully reinitializing them) on system suspend, just before the suspend handlers of the relevant drivers were executed. To avoid redundant power and reinitialization cycles, this patch removes this behavior: if a card is already powered off when system suspend kicks in, it is left at that state. If a card is active when a system sleep starts, everything is straightforward and works exactly like before. But if the card was already suspended before the sleep began, then when the MMC core powers it back up on resume, its run-time PM status has to be updated to reflect the actual post-system sleep status. The technique to do that is borrowed from the I2C runtime PM implementation (for more info see Documentation/power/runtime_pm.txt). Signed-off-by: Ohad Ben-Cohen Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 13 +++++++++++++ drivers/mmc/core/sdio_bus.c | 32 -------------------------------- 2 files changed, 13 insertions(+), 32 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 9683d4d3fced..241ffb28351c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -1785,6 +1786,18 @@ int mmc_resume_host(struct mmc_host *host) if (!(host->pm_flags & MMC_PM_KEEP_POWER)) { mmc_power_up(host); mmc_select_voltage(host, host->ocr); + /* + * Tell runtime PM core we just powered up the card, + * since it still believes the card is powered off. + * Note that currently runtime PM is only enabled + * for SDIO cards that are MMC_CAP_POWER_OFF_CARD + */ + if (mmc_card_sdio(host->card) && + (host->caps & MMC_CAP_POWER_OFF_CARD)) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_active(&host->card->dev); + pm_runtime_enable(&host->card->dev); + } } BUG_ON(!host->bus_ops->resume); err = host->bus_ops->resume(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 203da443e339..d29b9c36919a 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -197,44 +197,12 @@ out: #ifdef CONFIG_PM_RUNTIME -static int sdio_bus_pm_prepare(struct device *dev) -{ - struct sdio_func *func = dev_to_sdio_func(dev); - - /* - * Resume an SDIO device which was suspended at run time at this - * point, in order to allow standard SDIO suspend/resume paths - * to keep working as usual. - * - * Ultimately, the SDIO driver itself will decide (in its - * suspend handler, or lack thereof) whether the card should be - * removed or kept, and if kept, at what power state. - * - * At this point, PM core have increased our use count, so it's - * safe to directly resume the device. After system is resumed - * again, PM core will drop back its runtime PM use count, and if - * needed device will be suspended again. - * - * The end result is guaranteed to be a power state that is - * coherent with the device's runtime PM use count. - * - * The return value of pm_runtime_resume is deliberately unchecked - * since there is little point in failing system suspend if a - * device can't be resumed. - */ - if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) - pm_runtime_resume(dev); - - return 0; -} - static const struct dev_pm_ops sdio_bus_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, pm_generic_runtime_idle ) - .prepare = sdio_bus_pm_prepare, }; #define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops) From 080bc9774b6f1e3866747b18631bad26f47c22ce Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 28 Nov 2010 07:21:29 +0200 Subject: [PATCH 13/39] mmc: sdio: don't reinitialize nonremovable powered-resumed cards Upon system resume, SDIO core must reinitialize cards that were powered off during suspend. If the card had its power kept during suspend (and thus it is 'powered-resumed'), SDIO core performs only a limited reinitializing, mainly needed to make sure that the card wasn't removed/replaced. If a __nonremovable__ card is powered-resumed, we can safely skip the reinitializing phase. Note: 9b966aa (mmc: sdio: fully reconfigure oldcard on resume) removed the bus width reconfiguration since mmc_sdio_init_card already does it. It is brought back now in case mmc_sdio_init_card is skipped. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 16 ++++++++++++++-- include/linux/mmc/host.h | 5 +++++ 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c18810ab6465..82f4b9008987 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -627,15 +627,27 @@ static int mmc_sdio_suspend(struct mmc_host *host) static int mmc_sdio_resume(struct mmc_host *host) { - int i, err; + int i, err = 0; BUG_ON(!host); BUG_ON(!host->card); /* Basic card reinitialization. */ mmc_claim_host(host); - err = mmc_sdio_init_card(host, host->ocr, host->card, + + /* No need to reinitialize powered-resumed nonremovable cards */ + if (mmc_card_is_removable(host) || !mmc_card_is_powered_resumed(host)) + err = mmc_sdio_init_card(host, host->ocr, host->card, (host->pm_flags & MMC_PM_KEEP_POWER)); + else if (mmc_card_is_powered_resumed(host)) { + /* We may have switched to 1-bit mode during suspend */ + err = sdio_enable_4bit_bus(host->card); + if (err > 0) { + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + err = 0; + } + } + if (!err && host->sdio_irqs) mmc_signal_sdio_irq(host); mmc_release_host(host); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4a9d9d2589c7..3a85e73a38a9 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -320,5 +320,10 @@ static inline int mmc_card_is_removable(struct mmc_host *host) return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable; } +static inline int mmc_card_is_powered_resumed(struct mmc_host *host) +{ + return host->pm_flags & MMC_PM_KEEP_POWER; +} + #endif From e6f29a8dc1602e170daf955233891a9130573a55 Mon Sep 17 00:00:00 2001 From: Michal Miroslaw Date: Thu, 2 Dec 2010 23:38:12 +0100 Subject: [PATCH 14/39] mmc: fix detection of memory part of SD-combo card with broken SDIO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case of failure, mmc_attach_sdio() will power off the SD bus. Power it up and reinitialize before trying SD memory detection. Reported-by: Sahitya Tummala Signed-off-by: Michał Mirosław Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 241ffb28351c..97e0624eb9b6 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1569,6 +1569,11 @@ void mmc_rescan(struct work_struct *work) * Try SDMEM (but not MMC) even if SDIO * is broken. */ + mmc_power_up(host); + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + if (mmc_send_app_op_cond(host, 0, &ocr)) goto out_fail; From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 2001 From: Aries Lee Date: Wed, 15 Dec 2010 08:14:24 +0100 Subject: [PATCH 15/39] mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee Signed-off-by: Takashi Iwai Signed-off-by: Philip Rakity Tested-by: Philip Rakity Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 74 +++++++++++++++++---------- drivers/mmc/core/mmc_ops.c | 101 +++++++++++++++++++++++++++++++++++++ drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/host/sdhci.c | 7 ++- drivers/mmc/host/sdhci.h | 1 + include/linux/mmc/host.h | 1 + include/linux/mmc/mmc.h | 2 + 7 files changed, 158 insertions(+), 29 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 76bb621e9aa9..1d8409fcf155 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -534,39 +534,57 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { - unsigned ext_csd_bit, bus_width; + static unsigned ext_csd_bits[][2] = { + { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, + { EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 }, + { EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 }, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, + MMC_BUS_WIDTH_1 + }; + unsigned idx, bus_width = 0; - if (host->caps & MMC_CAP_8_BIT_DATA) { - if (ddr) - ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8; - else - ext_csd_bit = EXT_CSD_BUS_WIDTH_8; - bus_width = MMC_BUS_WIDTH_8; - } else { - if (ddr) - ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4; - else - ext_csd_bit = EXT_CSD_BUS_WIDTH_4; - bus_width = MMC_BUS_WIDTH_4; + if (host->caps & MMC_CAP_8_BIT_DATA) + idx = 0; + else + idx = 1; + for (; idx < ARRAY_SIZE(bus_widths); idx++) { + bus_width = bus_widths[idx]; + if (bus_width == MMC_BUS_WIDTH_1) + ddr = 0; /* no DDR for 1-bit width */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx][0]); + if (!err) { + /* + * If controller can't handle bus width test, + * use the highest bus width to maintain + * compatibility with previous MMC behavior. + */ + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + break; + mmc_set_bus_width_ddr(card->host, + bus_width, MMC_SDR_MODE); + err = mmc_bus_test(card, bus_width); + if (!err) + break; + } } - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, ext_csd_bit); - - if (err && err != -EBADMSG) - goto free_card; - + if (!err && ddr) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx][1]); + } if (err) { printk(KERN_WARNING "%s: switch to bus width %d ddr %d " - "failed\n", mmc_hostname(card->host), - 1 << bus_width, ddr); - err = 0; - } else { - if (ddr) - mmc_card_set_ddr_mode(card); - else - ddr = MMC_SDR_MODE; - + "failed\n", mmc_hostname(card->host), + 1 << bus_width, ddr); + goto free_card; + } else if (ddr) { + mmc_card_set_ddr_mode(card); mmc_set_bus_width_ddr(card->host, bus_width, ddr); } } diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 326447c9ede8..60842f878ded 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -462,3 +462,104 @@ int mmc_send_status(struct mmc_card *card, u32 *status) return 0; } +static int +mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode, + u8 len) +{ + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + struct scatterlist sg; + u8 *data_buf; + u8 *test_buf; + int i, err; + static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 }; + static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 }; + + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + + if (len == 8) + test_buf = testdata_8bit; + else if (len == 4) + test_buf = testdata_4bit; + else { + printk(KERN_ERR "%s: Invalid bus_width %d\n", + mmc_hostname(host), len); + kfree(data_buf); + return -EINVAL; + } + + if (opcode == MMC_BUS_TEST_W) + memcpy(data_buf, test_buf, len); + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + + mrq.cmd = &cmd; + mrq.data = &data; + cmd.opcode = opcode; + cmd.arg = 0; + + /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we + * rely on callers to never use this with "native" calls for reading + * CSD or CID. Native versions of those commands use the R2 type, + * not R1 plus a data block. + */ + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = len; + data.blocks = 1; + if (opcode == MMC_BUS_TEST_R) + data.flags = MMC_DATA_READ; + else + data.flags = MMC_DATA_WRITE; + + data.sg = &sg; + data.sg_len = 1; + sg_init_one(&sg, data_buf, len); + mmc_wait_for_req(host, &mrq); + err = 0; + if (opcode == MMC_BUS_TEST_R) { + for (i = 0; i < len / 4; i++) + if ((test_buf[i] ^ data_buf[i]) != 0xff) { + err = -EIO; + break; + } + } + kfree(data_buf); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return err; +} + +int mmc_bus_test(struct mmc_card *card, u8 bus_width) +{ + int err, width; + + if (bus_width == MMC_BUS_WIDTH_8) + width = 8; + else if (bus_width == MMC_BUS_WIDTH_4) + width = 4; + else if (bus_width == MMC_BUS_WIDTH_1) + return 0; /* no need for test */ + else + return -EINVAL; + + /* + * Ignore errors from BUS_TEST_W. BUS_TEST_R will fail if there + * is a problem. This improves chances that the test will work. + */ + mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width); + err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width); + return err; +} diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h index 653eb8e84178..e6d44b8a18db 100644 --- a/drivers/mmc/core/mmc_ops.h +++ b/drivers/mmc/core/mmc_ops.h @@ -26,6 +26,7 @@ int mmc_send_cid(struct mmc_host *host, u32 *cid); int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp); int mmc_spi_set_crc(struct mmc_host *host, int use_crc); int mmc_card_sleepawake(struct mmc_host *host, int sleep); +int mmc_bus_test(struct mmc_card *card, u8 bus_width); #endif diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 55698864c2cd..d5febe584b05 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -23,6 +23,7 @@ #include +#include #include #include "sdhci.h" @@ -1521,7 +1522,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (intmask & SDHCI_INT_DATA_TIMEOUT) host->data->error = -ETIMEDOUT; - else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) + else if (intmask & SDHCI_INT_DATA_END_BIT) + host->data->error = -EILSEQ; + else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) + != MMC_BUS_TEST_R) host->data->error = -EILSEQ; else if (intmask & SDHCI_INT_ADMA_ERROR) { printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc)); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 1efe7dc5255b..6e0969e40650 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -52,6 +52,7 @@ #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) +#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) #define SDHCI_RESPONSE 0x10 diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 3a85e73a38a9..bcb793ec7374 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -172,6 +172,7 @@ struct mmc_host { #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ /* DDR mode at 1.2V */ #define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ +#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */ mmc_pm_flag_t pm_caps; /* supported pm features */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 956fbd877692..612301f85d14 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -40,7 +40,9 @@ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ #define MMC_STOP_TRANSMISSION 12 /* ac R1b */ #define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ +#define MMC_BUS_TEST_R 14 /* adtc R1 */ #define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ +#define MMC_BUS_TEST_W 19 /* adtc R1 */ #define MMC_SPI_READ_OCR 58 /* spi spi_R3 */ #define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */ From d75c1084db5e4a30603729852046d0a87d4f7688 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 16 Dec 2010 17:54:14 +0100 Subject: [PATCH 16/39] mmc: sdhci: Enable bus-width test for JMicron controllers Signed-off-by: Takashi Iwai Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index d2638ffc4ed2..0dc905b20eee 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -381,6 +381,8 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot) slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) jmicron_enable_mmc(slot->host, 1); + slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST; + return 0; } From b3824f2c6f16ef19060a53ef9345a124de175098 Mon Sep 17 00:00:00 2001 From: Jeongbae Seo Date: Fri, 8 Oct 2010 17:46:20 +0900 Subject: [PATCH 17/39] mmc: sdhci-s3c: Support additional host capabilities This patch adds support for additional host capabilities like SD/MMC high speed, SDHCI bus width, etc. Signed-off-by: Jeongbae Seo Signed-off-by: Kukjin Kim Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index aacb862ecc8a..a7710f557849 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -427,6 +427,10 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; + /* It supports additional host capabilities if needed */ + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + ret = sdhci_add_host(host); if (ret) { dev_err(dev, "sdhci_add_host() failed\n"); From 253e0a7c3dc4bbbc69fc6bfd7c01bc4c9397a5e5 Mon Sep 17 00:00:00 2001 From: Jeongbae Seo Date: Fri, 8 Oct 2010 17:46:21 +0900 Subject: [PATCH 18/39] mmc: sdhci-s3c: Support controllers with no internal clock divider This patch supports controllers with no internal clock divider in SDHCI, such as the s5pc210 board. The external clock divider can be used to make a proper clock because SDHCI doesn't support internal clock divider by itself. If external clock divider type is selected, some functions related to clock control will be overrided by other functions. The current clock control index is added to let you know which clock bus is used for SDHCI when overriding functions. Checking functions are added into sdhci_s3c_consider_clock, because the clock divider step is different from that of host controller. Signed-off-by: Jeongbae Seo Cc: Jaehoon Chung Cc: Ben Dooks Signed-off-by: Kukjin Kim Acked-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 62 ++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index a7710f557849..17203586305c 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -130,6 +130,15 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, if (!clksrc) return UINT_MAX; + /* + * Clock divider's step is different as 1 from that of host controller + * when 'clk_type' is S3C_SDHCI_CLK_DIV_EXTERNAL. + */ + if (ourhost->pdata->clk_type) { + rate = clk_round_rate(clksrc, wanted); + return wanted - rate; + } + rate = clk_get_rate(clksrc); for (div = 1; div < 256; div *= 2) { @@ -232,6 +241,42 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host) return min; } +/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/ +static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + + return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX); +} + +/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */ +static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + + /* + * initial clock can be in the frequency range of + * 100KHz-400KHz, so we set it as max value. + */ + return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000); +} + +/* sdhci_cmu_set_clock - callback on clock change.*/ +static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + + /* don't bother if the clock is going off */ + if (clock == 0) + return; + + sdhci_s3c_set_clock(host, clock); + + clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); + + host->clock = clock; +} + static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, @@ -361,6 +406,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) clks++; sc->clk_bus[ptr] = clk; + + /* + * save current clock index to know which clock bus + * is used later in overriding functions. + */ + sc->cur_clk = ptr; + clk_enable(clk); dev_info(dev, "clock source %d: %s (%ld Hz)\n", @@ -427,6 +479,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; + /* + * If controller does not have internal clock divider, + * we can use overriding functions instead of default. + */ + if (pdata->clk_type) { + sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock; + sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock; + sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock; + } + /* It supports additional host capabilities if needed */ if (pdata->host_caps) host->mmc->caps |= pdata->host_caps; From c288b85554097a3d1271f935c48b442280b2db9e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 22 Dec 2010 09:50:12 +0100 Subject: [PATCH 19/39] mmc: check for > 1 clk_requests when disabling gating Since we make sure the clock is enabled in the mmc_host_clk_exit() function we should expect a reference counter of 1, not 0. Signed-off-by: Linus Walleij Tested-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 92e33703e437..b3ac6c5bc5c6 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -235,7 +235,8 @@ static inline void mmc_host_clk_exit(struct mmc_host *host) mmc_host_clk_gate_delayed(host); if (host->clk_gated) mmc_host_clk_ungate(host); - BUG_ON(host->clk_requests > 0); + /* There should be only one user now */ + WARN_ON(host->clk_requests > 1); } #else From 30652aa36b58d57fcc1a0acce51e391bbb6edf5e Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 1 Jan 2011 18:37:32 -0600 Subject: [PATCH 20/39] mmc: sdhci: add quirk for max len ADMA descriptors Some controllers misparse segment length 0 as being 0, not 65536. Add a quirk to deal with it. Signed-off-by: Olof Johansson Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 10 +++++++--- include/linux/mmc/sdhci.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index d5febe584b05..9e15f41f87be 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1949,10 +1949,14 @@ int sdhci_add_host(struct sdhci_host *host) * of bytes. When doing hardware scatter/gather, each entry cannot * be larger than 64 KiB though. */ - if (host->flags & SDHCI_USE_ADMA) - mmc->max_seg_size = 65536; - else + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC) + mmc->max_seg_size = 65535; + else + mmc->max_seg_size = 65536; + } else { mmc->max_seg_size = mmc->max_req_size; + } /* * Maximum block size. This varies from controller to controller and diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 0d953f513d81..83bd9f76709a 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -83,6 +83,8 @@ struct sdhci_host { #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) /* Controller doesn't have HISPD bit field in HI-SPEED SD card */ #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) +/* Controller treats ADMA descriptors with length 0000h incorrectly */ +#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ From 03d2bfc878e4dff9e596accc7b7eccf947804a3c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 1 Jan 2011 23:52:56 -0500 Subject: [PATCH 21/39] mmc: add sdhci-tegra driver for Tegra SoCs SDHCI driver for Tegra. This driver plugs in as a new variant of sdhci-pltfm, using the platform data structure passed in to specify the GPIOs to use for card detect, write protect and card power enablement. Original driver (of which only the header file is left): Signed-off-by: Yvonne Yip The rest, which has been rewritten by now: Signed-off-by: Olof Johansson Reviewed-by: Wolfram Sang Acked-by: Mike Rapoport Signed-off-by: Chris Ball --- arch/arm/mach-tegra/include/mach/sdhci.h | 29 +++ drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pltfm.c | 3 + drivers/mmc/host/sdhci-pltfm.h | 1 + drivers/mmc/host/sdhci-tegra.c | 257 +++++++++++++++++++++++ 6 files changed, 301 insertions(+) create mode 100644 arch/arm/mach-tegra/include/mach/sdhci.h create mode 100644 drivers/mmc/host/sdhci-tegra.c diff --git a/arch/arm/mach-tegra/include/mach/sdhci.h b/arch/arm/mach-tegra/include/mach/sdhci.h new file mode 100644 index 000000000000..3ad086e859c3 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/sdhci.h @@ -0,0 +1,29 @@ +/* + * include/asm-arm/arch-tegra/include/mach/sdhci.h + * + * Copyright (C) 2009 Palm, Inc. + * Author: Yvonne Yip + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H +#define __ASM_ARM_ARCH_TEGRA_SDHCI_H + +#include + +struct tegra_sdhci_platform_data { + int cd_gpio; + int wp_gpio; + int power_gpio; + int is_8bit; +}; + +#endif diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index f8fa9efca8ee..9f47d38dcc7f 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -151,6 +151,16 @@ config MMC_SDHCI_DOVE If unsure, say N. +config MMC_SDHCI_TEGRA + tristate "SDHCI platform support for the Tegra SD/MMC Controller" + depends on MMC_SDHCI_PLTFM && ARCH_TEGRA + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Tegra SD/MMC controller. If you have a Tegra + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_S3C tristate "SDHCI support on Samsung S3C SoC" depends on MMC_SDHCI && PLAT_SAMSUNG diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index d91364d4bf39..6d1ff9e27368 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -40,6 +40,7 @@ sdhci-platform-y := sdhci-pltfm.o sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o sdhci-platform-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o +sdhci-platform-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o sdhci-of-y := sdhci-of-core.o diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 91c6766c660c..dbab0407f4b6 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -172,6 +172,9 @@ static const struct platform_device_id sdhci_pltfm_ids[] = { #endif #ifdef CONFIG_MMC_SDHCI_DOVE { "sdhci-dove", (kernel_ulong_t)&sdhci_dove_pdata }, +#endif +#ifdef CONFIG_MMC_SDHCI_TEGRA + { "sdhci-tegra", (kernel_ulong_t)&sdhci_tegra_pdata }, #endif { }, }; diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index 62118b9f9d0a..ea2e44d9be5e 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -23,5 +23,6 @@ struct sdhci_pltfm_host { extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata; extern struct sdhci_pltfm_data sdhci_esdhc_imx_pdata; extern struct sdhci_pltfm_data sdhci_dove_pdata; +extern struct sdhci_pltfm_data sdhci_tegra_pdata; #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */ diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c new file mode 100644 index 000000000000..4823ee94a63f --- /dev/null +++ b/drivers/mmc/host/sdhci-tegra.c @@ -0,0 +1,257 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "sdhci.h" +#include "sdhci-pltfm.h" + +static u32 tegra_sdhci_readl(struct sdhci_host *host, int reg) +{ + u32 val; + + if (unlikely(reg == SDHCI_PRESENT_STATE)) { + /* Use wp_gpio here instead? */ + val = readl(host->ioaddr + reg); + return val | SDHCI_WRITE_PROTECT; + } + + return readl(host->ioaddr + reg); +} + +static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) +{ + if (unlikely(reg == SDHCI_HOST_VERSION)) { + /* Erratum: Version register is invalid in HW. */ + return SDHCI_SPEC_200; + } + + return readw(host->ioaddr + reg); +} + +static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + /* Seems like we're getting spurious timeout and crc errors, so + * disable signalling of them. In case of real errors software + * timers should take care of eventually detecting them. + */ + if (unlikely(reg == SDHCI_SIGNAL_ENABLE)) + val &= ~(SDHCI_INT_TIMEOUT|SDHCI_INT_CRC); + + writel(val, host->ioaddr + reg); + + if (unlikely(reg == SDHCI_INT_ENABLE)) { + /* Erratum: Must enable block gap interrupt detection */ + u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL); + if (val & SDHCI_INT_CARD_INT) + gap_ctrl |= 0x8; + else + gap_ctrl &= ~0x8; + writeb(gap_ctrl, host->ioaddr + SDHCI_BLOCK_GAP_CONTROL); + } +} + +static unsigned int tegra_sdhci_get_ro(struct sdhci_host *sdhci) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(sdhci->mmc)); + struct tegra_sdhci_platform_data *plat; + + plat = pdev->dev.platform_data; + + if (!gpio_is_valid(plat->wp_gpio)) + return -1; + + return gpio_get_value(plat->wp_gpio); +} + +static irqreturn_t carddetect_irq(int irq, void *data) +{ + struct sdhci_host *sdhost = (struct sdhci_host *)data; + + tasklet_schedule(&sdhost->card_tasklet); + return IRQ_HANDLED; +}; + +static int tegra_sdhci_8bit(struct sdhci_host *host, int bus_width) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct tegra_sdhci_platform_data *plat; + u32 ctrl; + + plat = pdev->dev.platform_data; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (plat->is_8bit && bus_width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + return 0; +} + + +static int tegra_sdhci_pltfm_init(struct sdhci_host *host, + struct sdhci_pltfm_data *pdata) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct tegra_sdhci_platform_data *plat; + struct clk *clk; + int rc; + + plat = pdev->dev.platform_data; + if (plat == NULL) { + dev_err(mmc_dev(host->mmc), "missing platform data\n"); + return -ENXIO; + } + + if (gpio_is_valid(plat->power_gpio)) { + rc = gpio_request(plat->power_gpio, "sdhci_power"); + if (rc) { + dev_err(mmc_dev(host->mmc), + "failed to allocate power gpio\n"); + goto out; + } + tegra_gpio_enable(plat->power_gpio); + gpio_direction_output(plat->power_gpio, 1); + } + + if (gpio_is_valid(plat->cd_gpio)) { + rc = gpio_request(plat->cd_gpio, "sdhci_cd"); + if (rc) { + dev_err(mmc_dev(host->mmc), + "failed to allocate cd gpio\n"); + goto out_power; + } + tegra_gpio_enable(plat->cd_gpio); + gpio_direction_input(plat->cd_gpio); + + rc = request_irq(gpio_to_irq(plat->cd_gpio), carddetect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + mmc_hostname(host->mmc), host); + + if (rc) { + dev_err(mmc_dev(host->mmc), "request irq error\n"); + goto out_cd; + } + + } + + if (gpio_is_valid(plat->wp_gpio)) { + rc = gpio_request(plat->wp_gpio, "sdhci_wp"); + if (rc) { + dev_err(mmc_dev(host->mmc), + "failed to allocate wp gpio\n"); + goto out_cd; + } + tegra_gpio_enable(plat->wp_gpio); + gpio_direction_input(plat->wp_gpio); + } + + clk = clk_get(mmc_dev(host->mmc), NULL); + if (IS_ERR(clk)) { + dev_err(mmc_dev(host->mmc), "clk err\n"); + rc = PTR_ERR(clk); + goto out_wp; + } + clk_enable(clk); + pltfm_host->clk = clk; + + if (plat->is_8bit) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + return 0; + +out_wp: + if (gpio_is_valid(plat->wp_gpio)) { + tegra_gpio_disable(plat->wp_gpio); + gpio_free(plat->wp_gpio); + } + +out_cd: + if (gpio_is_valid(plat->cd_gpio)) { + tegra_gpio_disable(plat->cd_gpio); + gpio_free(plat->cd_gpio); + } + +out_power: + if (gpio_is_valid(plat->power_gpio)) { + tegra_gpio_disable(plat->power_gpio); + gpio_free(plat->power_gpio); + } + +out: + return rc; +} + +static void tegra_sdhci_pltfm_exit(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct tegra_sdhci_platform_data *plat; + + plat = pdev->dev.platform_data; + + if (gpio_is_valid(plat->wp_gpio)) { + tegra_gpio_disable(plat->wp_gpio); + gpio_free(plat->wp_gpio); + } + + if (gpio_is_valid(plat->cd_gpio)) { + tegra_gpio_disable(plat->cd_gpio); + gpio_free(plat->cd_gpio); + } + + if (gpio_is_valid(plat->power_gpio)) { + tegra_gpio_disable(plat->power_gpio); + gpio_free(plat->power_gpio); + } + + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); +} + +static struct sdhci_ops tegra_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, + .read_l = tegra_sdhci_readl, + .read_w = tegra_sdhci_readw, + .write_l = tegra_sdhci_writel, + .platform_8bit_width = tegra_sdhci_8bit, +}; + +struct sdhci_pltfm_data sdhci_tegra_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC, + .ops = &tegra_sdhci_ops, + .init = tegra_sdhci_pltfm_init, + .exit = tegra_sdhci_pltfm_exit, +}; From f95f3850f7a9e1d49ebc5b6e72e7cc3ec3685b0b Mon Sep 17 00:00:00 2001 From: Will Newton Date: Sun, 2 Jan 2011 01:11:59 -0500 Subject: [PATCH 22/39] mmc: dw_mmc: Add Synopsys DesignWare mmc host driver. This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton Reviewed-by: Matt Fleming Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 16 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc.c | 1796 ++++++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc.h | 168 ++++ include/linux/mmc/dw_mmc.h | 217 +++++ 5 files changed, 2198 insertions(+) create mode 100644 drivers/mmc/host/dw_mmc.c create mode 100644 drivers/mmc/host/dw_mmc.h create mode 100644 include/linux/mmc/dw_mmc.h diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9f47d38dcc7f..5ec02a536c5d 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -479,6 +479,22 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND help If you say yes here SD-Cards may work on the EZkit. +config MMC_DW + tristate "Synopsys DesignWare Memory Card Interface" + depends on ARM + help + This selects support for the Synopsys DesignWare Mobile Storage IP + block, this provides host support for SD and MMC interfaces, in both + PIO and external DMA modes. + +config MMC_DW_IDMAC + bool "Internal DMAC interface" + depends on MMC_DW + help + This selects support for the internal DMAC block within the Synopsys + Designware Mobile Storage IP block. This disables the external DMA + interface. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 6d1ff9e27368..e834fb223e9a 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +obj-$(CONFIG_MMC_DW) += dw_mmc.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_USHC) += ushc.o diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c new file mode 100644 index 000000000000..2fcc82577c1b --- /dev/null +++ b/drivers/mmc/host/dw_mmc.c @@ -0,0 +1,1796 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dw_mmc.h" + +/* Common flag combinations */ +#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ + SDMMC_INT_HTO | SDMMC_INT_SBE | \ + SDMMC_INT_EBE) +#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \ + SDMMC_INT_RESP_ERR) +#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \ + DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE) +#define DW_MCI_SEND_STATUS 1 +#define DW_MCI_RECV_STATUS 2 +#define DW_MCI_DMA_THRESHOLD 16 + +#ifdef CONFIG_MMC_DW_IDMAC +struct idmac_desc { + u32 des0; /* Control Descriptor */ +#define IDMAC_DES0_DIC BIT(1) +#define IDMAC_DES0_LD BIT(2) +#define IDMAC_DES0_FD BIT(3) +#define IDMAC_DES0_CH BIT(4) +#define IDMAC_DES0_ER BIT(5) +#define IDMAC_DES0_CES BIT(30) +#define IDMAC_DES0_OWN BIT(31) + + u32 des1; /* Buffer sizes */ +#define IDMAC_SET_BUFFER1_SIZE(d, s) \ + ((d)->des1 = ((d)->des1 & 0x03ffc000) | ((s) & 0x3fff)) + + u32 des2; /* buffer 1 physical address */ + + u32 des3; /* buffer 2 physical address */ +}; +#endif /* CONFIG_MMC_DW_IDMAC */ + +/** + * struct dw_mci_slot - MMC slot state + * @mmc: The mmc_host representing this slot. + * @host: The MMC controller this slot is using. + * @ctype: Card type for this slot. + * @mrq: mmc_request currently being processed or waiting to be + * processed, or NULL when the slot is idle. + * @queue_node: List node for placing this node in the @queue list of + * &struct dw_mci. + * @clock: Clock rate configured by set_ios(). Protected by host->lock. + * @flags: Random state bits associated with the slot. + * @id: Number of this slot. + * @last_detect_state: Most recently observed card detect state. + */ +struct dw_mci_slot { + struct mmc_host *mmc; + struct dw_mci *host; + + u32 ctype; + + struct mmc_request *mrq; + struct list_head queue_node; + + unsigned int clock; + unsigned long flags; +#define DW_MMC_CARD_PRESENT 0 +#define DW_MMC_CARD_NEED_INIT 1 + int id; + int last_detect_state; +}; + +#if defined(CONFIG_DEBUG_FS) +static int dw_mci_req_show(struct seq_file *s, void *v) +{ + struct dw_mci_slot *slot = s->private; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_command *stop; + struct mmc_data *data; + + /* Make sure we get a consistent snapshot */ + spin_lock_bh(&slot->host->lock); + mrq = slot->mrq; + + if (mrq) { + cmd = mrq->cmd; + data = mrq->data; + stop = mrq->stop; + + if (cmd) + seq_printf(s, + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", + cmd->opcode, cmd->arg, cmd->flags, + cmd->resp[0], cmd->resp[1], cmd->resp[2], + cmd->resp[2], cmd->error); + if (data) + seq_printf(s, "DATA %u / %u * %u flg %x err %d\n", + data->bytes_xfered, data->blocks, + data->blksz, data->flags, data->error); + if (stop) + seq_printf(s, + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", + stop->opcode, stop->arg, stop->flags, + stop->resp[0], stop->resp[1], stop->resp[2], + stop->resp[2], stop->error); + } + + spin_unlock_bh(&slot->host->lock); + + return 0; +} + +static int dw_mci_req_open(struct inode *inode, struct file *file) +{ + return single_open(file, dw_mci_req_show, inode->i_private); +} + +static const struct file_operations dw_mci_req_fops = { + .owner = THIS_MODULE, + .open = dw_mci_req_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int dw_mci_regs_show(struct seq_file *s, void *v) +{ + seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS); + seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS); + seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD); + seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL); + seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK); + seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA); + + return 0; +} + +static int dw_mci_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, dw_mci_regs_show, inode->i_private); +} + +static const struct file_operations dw_mci_regs_fops = { + .owner = THIS_MODULE, + .open = dw_mci_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void dw_mci_init_debugfs(struct dw_mci_slot *slot) +{ + struct mmc_host *mmc = slot->mmc; + struct dw_mci *host = slot->host; + struct dentry *root; + struct dentry *node; + + root = mmc->debugfs_root; + if (!root) + return; + + node = debugfs_create_file("regs", S_IRUSR, root, host, + &dw_mci_regs_fops); + if (!node) + goto err; + + node = debugfs_create_file("req", S_IRUSR, root, slot, + &dw_mci_req_fops); + if (!node) + goto err; + + node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); + if (!node) + goto err; + + node = debugfs_create_x32("pending_events", S_IRUSR, root, + (u32 *)&host->pending_events); + if (!node) + goto err; + + node = debugfs_create_x32("completed_events", S_IRUSR, root, + (u32 *)&host->completed_events); + if (!node) + goto err; + + return; + +err: + dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); +} +#endif /* defined(CONFIG_DEBUG_FS) */ + +static void dw_mci_set_timeout(struct dw_mci *host) +{ + /* timeout (maximum) */ + mci_writel(host, TMOUT, 0xffffffff); +} + +static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) +{ + struct mmc_data *data; + u32 cmdr; + cmd->error = -EINPROGRESS; + + cmdr = cmd->opcode; + + if (cmdr == MMC_STOP_TRANSMISSION) + cmdr |= SDMMC_CMD_STOP; + else + cmdr |= SDMMC_CMD_PRV_DAT_WAIT; + + if (cmd->flags & MMC_RSP_PRESENT) { + /* We expect a response, so set this bit */ + cmdr |= SDMMC_CMD_RESP_EXP; + if (cmd->flags & MMC_RSP_136) + cmdr |= SDMMC_CMD_RESP_LONG; + } + + if (cmd->flags & MMC_RSP_CRC) + cmdr |= SDMMC_CMD_RESP_CRC; + + data = cmd->data; + if (data) { + cmdr |= SDMMC_CMD_DAT_EXP; + if (data->flags & MMC_DATA_STREAM) + cmdr |= SDMMC_CMD_STRM_MODE; + if (data->flags & MMC_DATA_WRITE) + cmdr |= SDMMC_CMD_DAT_WR; + } + + return cmdr; +} + +static void dw_mci_start_command(struct dw_mci *host, + struct mmc_command *cmd, u32 cmd_flags) +{ + host->cmd = cmd; + dev_vdbg(&host->pdev->dev, + "start command: ARGR=0x%08x CMDR=0x%08x\n", + cmd->arg, cmd_flags); + + mci_writel(host, CMDARG, cmd->arg); + wmb(); + + mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); +} + +static void send_stop_cmd(struct dw_mci *host, struct mmc_data *data) +{ + dw_mci_start_command(host, data->stop, host->stop_cmdr); +} + +/* DMA interface functions */ +static void dw_mci_stop_dma(struct dw_mci *host) +{ + if (host->use_dma) { + host->dma_ops->stop(host); + host->dma_ops->cleanup(host); + } else { + /* Data transfer was stopped by the interrupt handler */ + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); + } +} + +#ifdef CONFIG_MMC_DW_IDMAC +static void dw_mci_dma_cleanup(struct dw_mci *host) +{ + struct mmc_data *data = host->data; + + if (data) + dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); +} + +static void dw_mci_idmac_stop_dma(struct dw_mci *host) +{ + u32 temp; + + /* Disable and reset the IDMAC interface */ + temp = mci_readl(host, CTRL); + temp &= ~SDMMC_CTRL_USE_IDMAC; + temp |= SDMMC_CTRL_DMA_RESET; + mci_writel(host, CTRL, temp); + + /* Stop the IDMAC running */ + temp = mci_readl(host, BMOD); + temp &= ~SDMMC_IDMAC_ENABLE; + mci_writel(host, BMOD, temp); +} + +static void dw_mci_idmac_complete_dma(struct dw_mci *host) +{ + struct mmc_data *data = host->data; + + dev_vdbg(&host->pdev->dev, "DMA complete\n"); + + host->dma_ops->cleanup(host); + + /* + * If the card was removed, data will be NULL. No point in trying to + * send the stop command or waiting for NBUSY in this case. + */ + if (data) { + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + } +} + +static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data, + unsigned int sg_len) +{ + int i; + struct idmac_desc *desc = host->sg_cpu; + + for (i = 0; i < sg_len; i++, desc++) { + unsigned int length = sg_dma_len(&data->sg[i]); + u32 mem_addr = sg_dma_address(&data->sg[i]); + + /* Set the OWN bit and disable interrupts for this descriptor */ + desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH; + + /* Buffer length */ + IDMAC_SET_BUFFER1_SIZE(desc, length); + + /* Physical address to DMA to/from */ + desc->des2 = mem_addr; + } + + /* Set first descriptor */ + desc = host->sg_cpu; + desc->des0 |= IDMAC_DES0_FD; + + /* Set last descriptor */ + desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc); + desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC); + desc->des0 |= IDMAC_DES0_LD; + + wmb(); +} + +static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) +{ + u32 temp; + + dw_mci_translate_sglist(host, host->data, sg_len); + + /* Select IDMAC interface */ + temp = mci_readl(host, CTRL); + temp |= SDMMC_CTRL_USE_IDMAC; + mci_writel(host, CTRL, temp); + + wmb(); + + /* Enable the IDMAC */ + temp = mci_readl(host, BMOD); + temp |= SDMMC_IDMAC_ENABLE; + mci_writel(host, BMOD, temp); + + /* Start it running */ + mci_writel(host, PLDMND, 1); +} + +static int dw_mci_idmac_init(struct dw_mci *host) +{ + struct idmac_desc *p; + int i; + + /* Number of descriptors in the ring buffer */ + host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); + + /* Forward link the descriptor list */ + for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) + p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1)); + + /* Set the last descriptor as the end-of-ring descriptor */ + p->des3 = host->sg_dma; + p->des0 = IDMAC_DES0_ER; + + /* Mask out interrupts - get Tx & Rx complete only */ + mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | + SDMMC_IDMAC_INT_TI); + + /* Set the descriptor base address */ + mci_writel(host, DBADDR, host->sg_dma); + return 0; +} + +static struct dw_mci_dma_ops dw_mci_idmac_ops = { + .init = dw_mci_idmac_init, + .start = dw_mci_idmac_start_dma, + .stop = dw_mci_idmac_stop_dma, + .complete = dw_mci_idmac_complete_dma, + .cleanup = dw_mci_dma_cleanup, +}; +#endif /* CONFIG_MMC_DW_IDMAC */ + +static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) +{ + struct scatterlist *sg; + unsigned int i, direction, sg_len; + u32 temp; + + /* If we don't have a channel, we can't do DMA */ + if (!host->use_dma) + return -ENODEV; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-word-aligned buffers or lengths. Also, we don't bother + * with all the DMA setup overhead for short transfers. + */ + if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD) + return -EINVAL; + if (data->blksz & 3) + return -EINVAL; + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) + return -EINVAL; + } + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, + direction); + + dev_vdbg(&host->pdev->dev, + "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", + (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, + sg_len); + + /* Enable the DMA interface */ + temp = mci_readl(host, CTRL); + temp |= SDMMC_CTRL_DMA_ENABLE; + mci_writel(host, CTRL, temp); + + /* Disable RX/TX IRQs, let DMA handle it */ + temp = mci_readl(host, INTMASK); + temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR); + mci_writel(host, INTMASK, temp); + + host->dma_ops->start(host, sg_len); + + return 0; +} + +static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data) +{ + u32 temp; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + if (dw_mci_submit_data_dma(host, data)) { + host->sg = data->sg; + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + host->dir_status = DW_MCI_RECV_STATUS; + else + host->dir_status = DW_MCI_SEND_STATUS; + + temp = mci_readl(host, INTMASK); + temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR; + mci_writel(host, INTMASK, temp); + + temp = mci_readl(host, CTRL); + temp &= ~SDMMC_CTRL_DMA_ENABLE; + mci_writel(host, CTRL, temp); + } +} + +static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg) +{ + struct dw_mci *host = slot->host; + unsigned long timeout = jiffies + msecs_to_jiffies(500); + unsigned int cmd_status = 0; + + mci_writel(host, CMDARG, arg); + wmb(); + mci_writel(host, CMD, SDMMC_CMD_START | cmd); + + while (time_before(jiffies, timeout)) { + cmd_status = mci_readl(host, CMD); + if (!(cmd_status & SDMMC_CMD_START)) + return; + } + dev_err(&slot->mmc->class_dev, + "Timeout sending command (cmd %#x arg %#x status %#x)\n", + cmd, arg, cmd_status); +} + +static void dw_mci_setup_bus(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 div; + + if (slot->clock != host->current_speed) { + if (host->bus_hz % slot->clock) + /* + * move the + 1 after the divide to prevent + * over-clocking the card. + */ + div = ((host->bus_hz / slot->clock) >> 1) + 1; + else + div = (host->bus_hz / slot->clock) >> 1; + + dev_info(&slot->mmc->class_dev, + "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ" + " div = %d)\n", slot->id, host->bus_hz, slot->clock, + div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div); + + /* disable clock */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + /* set clock to desired speed */ + mci_writel(host, CLKDIV, div); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + /* enable clock */ + mci_writel(host, CLKENA, SDMMC_CLKEN_ENABLE); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + host->current_speed = slot->clock; + } + + /* Set the current slot bus width */ + mci_writel(host, CTYPE, slot->ctype); +} + +static void dw_mci_start_request(struct dw_mci *host, + struct dw_mci_slot *slot) +{ + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + u32 cmdflags; + + mrq = slot->mrq; + if (host->pdata->select_slot) + host->pdata->select_slot(slot->id); + + /* Slot specific timing and width adjustment */ + dw_mci_setup_bus(slot); + + host->cur_slot = slot; + host->mrq = mrq; + + host->pending_events = 0; + host->completed_events = 0; + host->data_status = 0; + + data = mrq->data; + if (data) { + dw_mci_set_timeout(host); + mci_writel(host, BYTCNT, data->blksz*data->blocks); + mci_writel(host, BLKSIZ, data->blksz); + } + + cmd = mrq->cmd; + cmdflags = dw_mci_prepare_command(slot->mmc, cmd); + + /* this is the first command, send the initialization clock */ + if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags)) + cmdflags |= SDMMC_CMD_INIT; + + if (data) { + dw_mci_submit_data(host, data); + wmb(); + } + + dw_mci_start_command(host, cmd, cmdflags); + + if (mrq->stop) + host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop); +} + +static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot, + struct mmc_request *mrq) +{ + dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", + host->state); + + spin_lock_bh(&host->lock); + slot->mrq = mrq; + + if (host->state == STATE_IDLE) { + host->state = STATE_SENDING_CMD; + dw_mci_start_request(host, slot); + } else { + list_add_tail(&slot->queue_node, &host->queue); + } + + spin_unlock_bh(&host->lock); +} + +static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + + WARN_ON(slot->mrq); + + if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) { + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + /* We don't support multiple blocks of weird lengths. */ + dw_mci_queue_request(host, slot, mrq); +} + +static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + + /* set default 1 bit mode */ + slot->ctype = SDMMC_CTYPE_1BIT; + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + slot->ctype = SDMMC_CTYPE_1BIT; + break; + case MMC_BUS_WIDTH_4: + slot->ctype = SDMMC_CTYPE_4BIT; + break; + } + + if (ios->clock) { + /* + * Use mirror of ios->clock to prevent race with mmc + * core ios update when finding the minimum. + */ + slot->clock = ios->clock; + } + + switch (ios->power_mode) { + case MMC_POWER_UP: + set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags); + break; + default: + break; + } +} + +static int dw_mci_get_ro(struct mmc_host *mmc) +{ + int read_only; + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci_board *brd = slot->host->pdata; + + /* Use platform get_ro function, else try on board write protect */ + if (brd->get_ro) + read_only = brd->get_ro(slot->id); + else + read_only = + mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0; + + dev_dbg(&mmc->class_dev, "card is %s\n", + read_only ? "read-only" : "read-write"); + + return read_only; +} + +static int dw_mci_get_cd(struct mmc_host *mmc) +{ + int present; + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci_board *brd = slot->host->pdata; + + /* Use platform get_cd function, else try onboard card detect */ + if (brd->get_cd) + present = !brd->get_cd(slot->id); + else + present = (mci_readl(slot->host, CDETECT) & (1 << slot->id)) + == 0 ? 1 : 0; + + if (present) + dev_dbg(&mmc->class_dev, "card is present\n"); + else + dev_dbg(&mmc->class_dev, "card is not present\n"); + + return present; +} + +static const struct mmc_host_ops dw_mci_ops = { + .request = dw_mci_request, + .set_ios = dw_mci_set_ios, + .get_ro = dw_mci_get_ro, + .get_cd = dw_mci_get_cd, +}; + +static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) + __releases(&host->lock) + __acquires(&host->lock) +{ + struct dw_mci_slot *slot; + struct mmc_host *prev_mmc = host->cur_slot->mmc; + + WARN_ON(host->cmd || host->data); + + host->cur_slot->mrq = NULL; + host->mrq = NULL; + if (!list_empty(&host->queue)) { + slot = list_entry(host->queue.next, + struct dw_mci_slot, queue_node); + list_del(&slot->queue_node); + dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", + mmc_hostname(slot->mmc)); + host->state = STATE_SENDING_CMD; + dw_mci_start_request(host, slot); + } else { + dev_vdbg(&host->pdev->dev, "list empty\n"); + host->state = STATE_IDLE; + } + + spin_unlock(&host->lock); + mmc_request_done(prev_mmc, mrq); + spin_lock(&host->lock); +} + +static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd) +{ + u32 status = host->cmd_status; + + host->cmd_status = 0; + + /* Read the response from the card (up to 16 bytes) */ + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = mci_readl(host, RESP0); + cmd->resp[2] = mci_readl(host, RESP1); + cmd->resp[1] = mci_readl(host, RESP2); + cmd->resp[0] = mci_readl(host, RESP3); + } else { + cmd->resp[0] = mci_readl(host, RESP0); + cmd->resp[1] = 0; + cmd->resp[2] = 0; + cmd->resp[3] = 0; + } + } + + if (status & SDMMC_INT_RTO) + cmd->error = -ETIMEDOUT; + else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC)) + cmd->error = -EILSEQ; + else if (status & SDMMC_INT_RESP_ERR) + cmd->error = -EIO; + else + cmd->error = 0; + + if (cmd->error) { + /* newer ip versions need a delay between retries */ + if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY) + mdelay(20); + + if (cmd->data) { + host->data = NULL; + dw_mci_stop_dma(host); + } + } +} + +static void dw_mci_tasklet_func(unsigned long priv) +{ + struct dw_mci *host = (struct dw_mci *)priv; + struct mmc_data *data; + struct mmc_command *cmd; + enum dw_mci_state state; + enum dw_mci_state prev_state; + u32 status; + + spin_lock(&host->lock); + + state = host->state; + data = host->data; + + do { + prev_state = state; + + switch (state) { + case STATE_IDLE: + break; + + case STATE_SENDING_CMD: + if (!test_and_clear_bit(EVENT_CMD_COMPLETE, + &host->pending_events)) + break; + + cmd = host->cmd; + host->cmd = NULL; + set_bit(EVENT_CMD_COMPLETE, &host->completed_events); + dw_mci_command_complete(host, host->mrq->cmd); + if (!host->mrq->data || cmd->error) { + dw_mci_request_end(host, host->mrq); + goto unlock; + } + + prev_state = state = STATE_SENDING_DATA; + /* fall through */ + + case STATE_SENDING_DATA: + if (test_and_clear_bit(EVENT_DATA_ERROR, + &host->pending_events)) { + dw_mci_stop_dma(host); + if (data->stop) + send_stop_cmd(host, data); + state = STATE_DATA_ERROR; + break; + } + + if (!test_and_clear_bit(EVENT_XFER_COMPLETE, + &host->pending_events)) + break; + + set_bit(EVENT_XFER_COMPLETE, &host->completed_events); + prev_state = state = STATE_DATA_BUSY; + /* fall through */ + + case STATE_DATA_BUSY: + if (!test_and_clear_bit(EVENT_DATA_COMPLETE, + &host->pending_events)) + break; + + host->data = NULL; + set_bit(EVENT_DATA_COMPLETE, &host->completed_events); + status = host->data_status; + + if (status & DW_MCI_DATA_ERROR_FLAGS) { + if (status & SDMMC_INT_DTO) { + dev_err(&host->pdev->dev, + "data timeout error\n"); + data->error = -ETIMEDOUT; + } else if (status & SDMMC_INT_DCRC) { + dev_err(&host->pdev->dev, + "data CRC error\n"); + data->error = -EILSEQ; + } else { + dev_err(&host->pdev->dev, + "data FIFO error " + "(status=%08x)\n", + status); + data->error = -EIO; + } + } else { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + if (!data->stop) { + dw_mci_request_end(host, host->mrq); + goto unlock; + } + + prev_state = state = STATE_SENDING_STOP; + if (!data->error) + send_stop_cmd(host, data); + /* fall through */ + + case STATE_SENDING_STOP: + if (!test_and_clear_bit(EVENT_CMD_COMPLETE, + &host->pending_events)) + break; + + host->cmd = NULL; + dw_mci_command_complete(host, host->mrq->stop); + dw_mci_request_end(host, host->mrq); + goto unlock; + + case STATE_DATA_ERROR: + if (!test_and_clear_bit(EVENT_XFER_COMPLETE, + &host->pending_events)) + break; + + state = STATE_DATA_BUSY; + break; + } + } while (state != prev_state); + + host->state = state; +unlock: + spin_unlock(&host->lock); + +} + +static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt) +{ + u16 *pdata = (u16 *)buf; + + WARN_ON(cnt % 2 != 0); + + cnt = cnt >> 1; + while (cnt > 0) { + mci_writew(host, DATA, *pdata++); + cnt--; + } +} + +static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt) +{ + u16 *pdata = (u16 *)buf; + + WARN_ON(cnt % 2 != 0); + + cnt = cnt >> 1; + while (cnt > 0) { + *pdata++ = mci_readw(host, DATA); + cnt--; + } +} + +static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt) +{ + u32 *pdata = (u32 *)buf; + + WARN_ON(cnt % 4 != 0); + WARN_ON((unsigned long)pdata & 0x3); + + cnt = cnt >> 2; + while (cnt > 0) { + mci_writel(host, DATA, *pdata++); + cnt--; + } +} + +static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt) +{ + u32 *pdata = (u32 *)buf; + + WARN_ON(cnt % 4 != 0); + WARN_ON((unsigned long)pdata & 0x3); + + cnt = cnt >> 2; + while (cnt > 0) { + *pdata++ = mci_readl(host, DATA); + cnt--; + } +} + +static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt) +{ + u64 *pdata = (u64 *)buf; + + WARN_ON(cnt % 8 != 0); + + cnt = cnt >> 3; + while (cnt > 0) { + mci_writeq(host, DATA, *pdata++); + cnt--; + } +} + +static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt) +{ + u64 *pdata = (u64 *)buf; + + WARN_ON(cnt % 8 != 0); + + cnt = cnt >> 3; + while (cnt > 0) { + *pdata++ = mci_readq(host, DATA); + cnt--; + } +} + +static void dw_mci_read_data_pio(struct dw_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + int shift = host->data_shift; + u32 status; + unsigned int nbytes = 0, len, old_len, count = 0; + + do { + len = SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift; + if (count == 0) + old_len = len; + + if (offset + len <= sg->length) { + host->pull_data(host, (void *)(buf + offset), len); + + offset += len; + nbytes += len; + + if (offset == sg->length) { + flush_dcache_page(sg_page(sg)); + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + host->pull_data(host, (void *)(buf + offset), + remaining); + nbytes += remaining; + + flush_dcache_page(sg_page(sg)); + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = len - remaining; + buf = sg_virt(sg); + host->pull_data(host, buf, offset); + nbytes += offset; + } + + status = mci_readl(host, MINTSTS); + mci_writel(host, RINTSTS, SDMMC_INT_RXDR); + if (status & DW_MCI_DATA_ERROR_FLAGS) { + host->data_status = status; + data->bytes_xfered += nbytes; + smp_wmb(); + + set_bit(EVENT_DATA_ERROR, &host->pending_events); + + tasklet_schedule(&host->tasklet); + return; + } + count++; + } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ + len = SDMMC_GET_FCNT(mci_readl(host, STATUS)); + host->pio_offset = offset; + data->bytes_xfered += nbytes; + return; + +done: + data->bytes_xfered += nbytes; + smp_wmb(); + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); +} + +static void dw_mci_write_data_pio(struct dw_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + int shift = host->data_shift; + u32 status; + unsigned int nbytes = 0, len; + + do { + len = SDMMC_FIFO_SZ - + (SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift); + if (offset + len <= sg->length) { + host->push_data(host, (void *)(buf + offset), len); + + offset += len; + nbytes += len; + if (offset == sg->length) { + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + + host->push_data(host, (void *)(buf + offset), + remaining); + nbytes += remaining; + + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = len - remaining; + buf = sg_virt(sg); + host->push_data(host, (void *)buf, offset); + nbytes += offset; + } + + status = mci_readl(host, MINTSTS); + mci_writel(host, RINTSTS, SDMMC_INT_TXDR); + if (status & DW_MCI_DATA_ERROR_FLAGS) { + host->data_status = status; + data->bytes_xfered += nbytes; + + smp_wmb(); + + set_bit(EVENT_DATA_ERROR, &host->pending_events); + + tasklet_schedule(&host->tasklet); + return; + } + } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ + + host->pio_offset = offset; + data->bytes_xfered += nbytes; + + return; + +done: + data->bytes_xfered += nbytes; + smp_wmb(); + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); +} + +static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) +{ + if (!host->cmd_status) + host->cmd_status = status; + + smp_wmb(); + + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); +} + +static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) +{ + struct dw_mci *host = dev_id; + u32 status, pending; + unsigned int pass_count = 0; + + do { + status = mci_readl(host, RINTSTS); + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ + + /* + * DTO fix - version 2.10a and below, and only if internal DMA + * is configured. + */ + if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) { + if (!pending && + ((mci_readl(host, STATUS) >> 17) & 0x1fff)) + pending |= SDMMC_INT_DATA_OVER; + } + + if (!pending) + break; + + if (pending & DW_MCI_CMD_ERROR_FLAGS) { + mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); + host->cmd_status = status; + smp_wmb(); + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + } + + if (pending & DW_MCI_DATA_ERROR_FLAGS) { + /* if there is an error report DATA_ERROR */ + mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); + host->data_status = status; + smp_wmb(); + set_bit(EVENT_DATA_ERROR, &host->pending_events); + tasklet_schedule(&host->tasklet); + } + + if (pending & SDMMC_INT_DATA_OVER) { + mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); + if (!host->data_status) + host->data_status = status; + smp_wmb(); + if (host->dir_status == DW_MCI_RECV_STATUS) { + if (host->sg != NULL) + dw_mci_read_data_pio(host); + } + set_bit(EVENT_DATA_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + } + + if (pending & SDMMC_INT_RXDR) { + mci_writel(host, RINTSTS, SDMMC_INT_RXDR); + if (host->sg) + dw_mci_read_data_pio(host); + } + + if (pending & SDMMC_INT_TXDR) { + mci_writel(host, RINTSTS, SDMMC_INT_TXDR); + if (host->sg) + dw_mci_write_data_pio(host); + } + + if (pending & SDMMC_INT_CMD_DONE) { + mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); + dw_mci_cmd_interrupt(host, status); + } + + if (pending & SDMMC_INT_CD) { + mci_writel(host, RINTSTS, SDMMC_INT_CD); + tasklet_schedule(&host->card_tasklet); + } + + } while (pass_count++ < 5); + +#ifdef CONFIG_MMC_DW_IDMAC + /* Handle DMA interrupts */ + pending = mci_readl(host, IDSTS); + if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { + mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); + mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); + set_bit(EVENT_DATA_COMPLETE, &host->pending_events); + host->dma_ops->complete(host); + } +#endif + + return IRQ_HANDLED; +} + +static void dw_mci_tasklet_card(unsigned long data) +{ + struct dw_mci *host = (struct dw_mci *)data; + int i; + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + struct mmc_host *mmc = slot->mmc; + struct mmc_request *mrq; + int present; + u32 ctrl; + + present = dw_mci_get_cd(mmc); + while (present != slot->last_detect_state) { + spin_lock(&host->lock); + + dev_dbg(&slot->mmc->class_dev, "card %s\n", + present ? "inserted" : "removed"); + + /* Card change detected */ + slot->last_detect_state = present; + + /* Power up slot */ + if (present != 0) { + if (host->pdata->setpower) + host->pdata->setpower(slot->id, + mmc->ocr_avail); + + set_bit(DW_MMC_CARD_PRESENT, &slot->flags); + } + + /* Clean up queue if present */ + mrq = slot->mrq; + if (mrq) { + if (mrq == host->mrq) { + host->data = NULL; + host->cmd = NULL; + + switch (host->state) { + case STATE_IDLE: + break; + case STATE_SENDING_CMD: + mrq->cmd->error = -ENOMEDIUM; + if (!mrq->data) + break; + /* fall through */ + case STATE_SENDING_DATA: + mrq->data->error = -ENOMEDIUM; + dw_mci_stop_dma(host); + break; + case STATE_DATA_BUSY: + case STATE_DATA_ERROR: + if (mrq->data->error == -EINPROGRESS) + mrq->data->error = -ENOMEDIUM; + if (!mrq->stop) + break; + /* fall through */ + case STATE_SENDING_STOP: + mrq->stop->error = -ENOMEDIUM; + break; + } + + dw_mci_request_end(host, mrq); + } else { + list_del(&slot->queue_node); + mrq->cmd->error = -ENOMEDIUM; + if (mrq->data) + mrq->data->error = -ENOMEDIUM; + if (mrq->stop) + mrq->stop->error = -ENOMEDIUM; + + spin_unlock(&host->lock); + mmc_request_done(slot->mmc, mrq); + spin_lock(&host->lock); + } + } + + /* Power down slot */ + if (present == 0) { + if (host->pdata->setpower) + host->pdata->setpower(slot->id, 0); + clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); + + /* + * Clear down the FIFO - doing so generates a + * block interrupt, hence setting the + * scatter-gather pointer to NULL. + */ + host->sg = NULL; + + ctrl = mci_readl(host, CTRL); + ctrl |= SDMMC_CTRL_FIFO_RESET; + mci_writel(host, CTRL, ctrl); + +#ifdef CONFIG_MMC_DW_IDMAC + ctrl = mci_readl(host, BMOD); + ctrl |= 0x01; /* Software reset of DMA */ + mci_writel(host, BMOD, ctrl); +#endif + + } + + spin_unlock(&host->lock); + present = dw_mci_get_cd(mmc); + } + + mmc_detect_change(slot->mmc, + msecs_to_jiffies(host->pdata->detect_delay_ms)); + } +} + +static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) +{ + struct mmc_host *mmc; + struct dw_mci_slot *slot; + + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->pdev->dev); + if (!mmc) + return -ENOMEM; + + slot = mmc_priv(mmc); + slot->id = id; + slot->mmc = mmc; + slot->host = host; + + mmc->ops = &dw_mci_ops; + mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); + mmc->f_max = host->bus_hz; + + if (host->pdata->get_ocr) + mmc->ocr_avail = host->pdata->get_ocr(id); + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + /* + * Start with slot power disabled, it will be enabled when a card + * is detected. + */ + if (host->pdata->setpower) + host->pdata->setpower(id, 0); + + mmc->caps = 0; + if (host->pdata->get_bus_wd) + if (host->pdata->get_bus_wd(slot->id) >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + +#ifdef CONFIG_MMC_DW_IDMAC + mmc->max_segs = host->ring_size; + mmc->max_blk_size = 65536; + mmc->max_blk_count = host->ring_size; + mmc->max_seg_size = 0x1000; + mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count; +#else + if (host->pdata->blk_settings) { + mmc->max_segs = host->pdata->blk_settings->max_segs; + mmc->max_blk_size = host->pdata->blk_settings->max_blk_size; + mmc->max_blk_count = host->pdata->blk_settings->max_blk_count; + mmc->max_req_size = host->pdata->blk_settings->max_req_size; + mmc->max_seg_size = host->pdata->blk_settings->max_seg_size; + } else { + /* Useful defaults if platform data is unset. */ + mmc->max_segs = 64; + mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ + mmc->max_blk_count = 512; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + } +#endif /* CONFIG_MMC_DW_IDMAC */ + + if (dw_mci_get_cd(mmc)) + set_bit(DW_MMC_CARD_PRESENT, &slot->flags); + else + clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); + + host->slot[id] = slot; + mmc_add_host(mmc); + +#if defined(CONFIG_DEBUG_FS) + dw_mci_init_debugfs(slot); +#endif + + /* Card initially undetected */ + slot->last_detect_state = 0; + + return 0; +} + +static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) +{ + /* Shutdown detect IRQ */ + if (slot->host->pdata->exit) + slot->host->pdata->exit(id); + + /* Debugfs stuff is cleaned up by mmc core */ + mmc_remove_host(slot->mmc); + slot->host->slot[id] = NULL; + mmc_free_host(slot->mmc); +} + +static void dw_mci_init_dma(struct dw_mci *host) +{ + /* Alloc memory for sg translation */ + host->sg_cpu = dma_alloc_coherent(&host->pdev->dev, PAGE_SIZE, + &host->sg_dma, GFP_KERNEL); + if (!host->sg_cpu) { + dev_err(&host->pdev->dev, "%s: could not alloc DMA memory\n", + __func__); + goto no_dma; + } + + /* Determine which DMA interface to use */ +#ifdef CONFIG_MMC_DW_IDMAC + host->dma_ops = &dw_mci_idmac_ops; + dev_info(&host->pdev->dev, "Using internal DMA controller.\n"); +#endif + + if (!host->dma_ops) + goto no_dma; + + if (host->dma_ops->init) { + if (host->dma_ops->init(host)) { + dev_err(&host->pdev->dev, "%s: Unable to initialize " + "DMA Controller.\n", __func__); + goto no_dma; + } + } else { + dev_err(&host->pdev->dev, "DMA initialization not found.\n"); + goto no_dma; + } + + host->use_dma = 1; + return; + +no_dma: + dev_info(&host->pdev->dev, "Using PIO mode.\n"); + host->use_dma = 0; + return; +} + +static bool mci_wait_reset(struct device *dev, struct dw_mci *host) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(500); + unsigned int ctrl; + + mci_writel(host, CTRL, (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | + SDMMC_CTRL_DMA_RESET)); + + /* wait till resets clear */ + do { + ctrl = mci_readl(host, CTRL); + if (!(ctrl & (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | + SDMMC_CTRL_DMA_RESET))) + return true; + } while (time_before(jiffies, timeout)); + + dev_err(dev, "Timeout resetting block (ctrl %#x)\n", ctrl); + + return false; +} + +static int dw_mci_probe(struct platform_device *pdev) +{ + struct dw_mci *host; + struct resource *regs; + struct dw_mci_board *pdata; + int irq, ret, i, width; + u32 fifo_size; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + if (!host) + return -ENOMEM; + + host->pdev = pdev; + host->pdata = pdata = pdev->dev.platform_data; + if (!pdata || !pdata->init) { + dev_err(&pdev->dev, + "Platform data must supply init function\n"); + ret = -ENODEV; + goto err_freehost; + } + + if (!pdata->select_slot && pdata->num_slots > 1) { + dev_err(&pdev->dev, + "Platform data must supply select_slot function\n"); + ret = -ENODEV; + goto err_freehost; + } + + if (!pdata->bus_hz) { + dev_err(&pdev->dev, + "Platform data must supply bus speed\n"); + ret = -ENODEV; + goto err_freehost; + } + + host->bus_hz = pdata->bus_hz; + host->quirks = pdata->quirks; + + spin_lock_init(&host->lock); + INIT_LIST_HEAD(&host->queue); + + ret = -ENOMEM; + host->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!host->regs) + goto err_freehost; + + host->dma_ops = pdata->dma_ops; + dw_mci_init_dma(host); + + /* + * Get the host data width - this assumes that HCON has been set with + * the correct values. + */ + i = (mci_readl(host, HCON) >> 7) & 0x7; + if (!i) { + host->push_data = dw_mci_push_data16; + host->pull_data = dw_mci_pull_data16; + width = 16; + host->data_shift = 1; + } else if (i == 2) { + host->push_data = dw_mci_push_data64; + host->pull_data = dw_mci_pull_data64; + width = 64; + host->data_shift = 3; + } else { + /* Check for a reserved value, and warn if it is */ + WARN((i != 1), + "HCON reports a reserved host data width!\n" + "Defaulting to 32-bit access.\n"); + host->push_data = dw_mci_push_data32; + host->pull_data = dw_mci_pull_data32; + width = 32; + host->data_shift = 2; + } + + /* Reset all blocks */ + if (!mci_wait_reset(&pdev->dev, host)) { + ret = -ENODEV; + goto err_dmaunmap; + } + + /* Clear the interrupts for the host controller */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ + + /* Put in max timeout */ + mci_writel(host, TMOUT, 0xFFFFFFFF); + + /* + * FIFO threshold settings RxMark = fifo_size / 2 - 1, + * Tx Mark = fifo_size / 2 DMA Size = 8 + */ + fifo_size = mci_readl(host, FIFOTH); + fifo_size = (fifo_size >> 16) & 0x7ff; + mci_writel(host, FIFOTH, ((0x2 << 28) | ((fifo_size/2 - 1) << 16) | + ((fifo_size/2) << 0))); + + /* disable clock to CIU */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host); + tasklet_init(&host->card_tasklet, + dw_mci_tasklet_card, (unsigned long)host); + + ret = request_irq(irq, dw_mci_interrupt, 0, "dw-mci", host); + if (ret) + goto err_dmaunmap; + + platform_set_drvdata(pdev, host); + + if (host->pdata->num_slots) + host->num_slots = host->pdata->num_slots; + else + host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1; + + /* We need at least one slot to succeed */ + for (i = 0; i < host->num_slots; i++) { + ret = dw_mci_init_slot(host, i); + if (ret) { + ret = -ENODEV; + goto err_init_slot; + } + } + + /* + * Enable interrupts for command done, data over, data empty, card det, + * receive ready and error such as transmit, receive timeout, crc error + */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | + SDMMC_INT_TXDR | SDMMC_INT_RXDR | + DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ + + dev_info(&pdev->dev, "DW MMC controller at irq %d, " + "%d bit host data width\n", irq, width); + if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) + dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n"); + + return 0; + +err_init_slot: + /* De-init any initialized slots */ + while (i > 0) { + if (host->slot[i]) + dw_mci_cleanup_slot(host->slot[i], i); + i--; + } + free_irq(irq, host); + +err_dmaunmap: + if (host->use_dma && host->dma_ops->exit) + host->dma_ops->exit(host); + dma_free_coherent(&host->pdev->dev, PAGE_SIZE, + host->sg_cpu, host->sg_dma); + iounmap(host->regs); + +err_freehost: + kfree(host); + return ret; +} + +static int __exit dw_mci_remove(struct platform_device *pdev) +{ + struct dw_mci *host = platform_get_drvdata(pdev); + int i; + + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ + + platform_set_drvdata(pdev, NULL); + + for (i = 0; i < host->num_slots; i++) { + dev_dbg(&pdev->dev, "remove slot %d\n", i); + if (host->slot[i]) + dw_mci_cleanup_slot(host->slot[i], i); + } + + /* disable clock to CIU */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + free_irq(platform_get_irq(pdev, 0), host); + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + + if (host->use_dma && host->dma_ops->exit) + host->dma_ops->exit(host); + + iounmap(host->regs); + + kfree(host); + return 0; +} + +#ifdef CONFIG_PM +/* + * TODO: we should probably disable the clock to the card in the suspend path. + */ +static int dw_mci_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + int i, ret; + struct dw_mci *host = platform_get_drvdata(pdev); + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + if (!slot) + continue; + ret = mmc_suspend_host(slot->mmc); + if (ret < 0) { + while (--i >= 0) { + slot = host->slot[i]; + if (slot) + mmc_resume_host(host->slot[i]->mmc); + } + return ret; + } + } + + return 0; +} + +static int dw_mci_resume(struct platform_device *pdev) +{ + int i, ret; + struct dw_mci *host = platform_get_drvdata(pdev); + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + if (!slot) + continue; + ret = mmc_resume_host(host->slot[i]->mmc); + if (ret < 0) + return ret; + } + + return 0; +} +#else +#define dw_mci_suspend NULL +#define dw_mci_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver dw_mci_driver = { + .remove = __exit_p(dw_mci_remove), + .suspend = dw_mci_suspend, + .resume = dw_mci_resume, + .driver = { + .name = "dw_mmc", + }, +}; + +static int __init dw_mci_init(void) +{ + return platform_driver_probe(&dw_mci_driver, dw_mci_probe); +} + +static void __exit dw_mci_exit(void) +{ + platform_driver_unregister(&dw_mci_driver); +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); +MODULE_AUTHOR("NXP Semiconductor VietNam"); +MODULE_AUTHOR("Imagination Technologies Ltd"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h new file mode 100644 index 000000000000..5dd55a75233d --- /dev/null +++ b/drivers/mmc/host/dw_mmc.h @@ -0,0 +1,168 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DW_MMC_H_ +#define _DW_MMC_H_ + +#define SDMMC_CTRL 0x000 +#define SDMMC_PWREN 0x004 +#define SDMMC_CLKDIV 0x008 +#define SDMMC_CLKSRC 0x00c +#define SDMMC_CLKENA 0x010 +#define SDMMC_TMOUT 0x014 +#define SDMMC_CTYPE 0x018 +#define SDMMC_BLKSIZ 0x01c +#define SDMMC_BYTCNT 0x020 +#define SDMMC_INTMASK 0x024 +#define SDMMC_CMDARG 0x028 +#define SDMMC_CMD 0x02c +#define SDMMC_RESP0 0x030 +#define SDMMC_RESP1 0x034 +#define SDMMC_RESP2 0x038 +#define SDMMC_RESP3 0x03c +#define SDMMC_MINTSTS 0x040 +#define SDMMC_RINTSTS 0x044 +#define SDMMC_STATUS 0x048 +#define SDMMC_FIFOTH 0x04c +#define SDMMC_CDETECT 0x050 +#define SDMMC_WRTPRT 0x054 +#define SDMMC_GPIO 0x058 +#define SDMMC_TCBCNT 0x05c +#define SDMMC_TBBCNT 0x060 +#define SDMMC_DEBNCE 0x064 +#define SDMMC_USRID 0x068 +#define SDMMC_VERID 0x06c +#define SDMMC_HCON 0x070 +#define SDMMC_BMOD 0x080 +#define SDMMC_PLDMND 0x084 +#define SDMMC_DBADDR 0x088 +#define SDMMC_IDSTS 0x08c +#define SDMMC_IDINTEN 0x090 +#define SDMMC_DSCADDR 0x094 +#define SDMMC_BUFADDR 0x098 +#define SDMMC_DATA 0x100 +#define SDMMC_DATA_ADR 0x100 + +/* shift bit field */ +#define _SBF(f, v) ((v) << (f)) + +/* Control register defines */ +#define SDMMC_CTRL_USE_IDMAC BIT(25) +#define SDMMC_CTRL_CEATA_INT_EN BIT(11) +#define SDMMC_CTRL_SEND_AS_CCSD BIT(10) +#define SDMMC_CTRL_SEND_CCSD BIT(9) +#define SDMMC_CTRL_ABRT_READ_DATA BIT(8) +#define SDMMC_CTRL_SEND_IRQ_RESP BIT(7) +#define SDMMC_CTRL_READ_WAIT BIT(6) +#define SDMMC_CTRL_DMA_ENABLE BIT(5) +#define SDMMC_CTRL_INT_ENABLE BIT(4) +#define SDMMC_CTRL_DMA_RESET BIT(2) +#define SDMMC_CTRL_FIFO_RESET BIT(1) +#define SDMMC_CTRL_RESET BIT(0) +/* Clock Enable register defines */ +#define SDMMC_CLKEN_LOW_PWR BIT(16) +#define SDMMC_CLKEN_ENABLE BIT(0) +/* time-out register defines */ +#define SDMMC_TMOUT_DATA(n) _SBF(8, (n)) +#define SDMMC_TMOUT_DATA_MSK 0xFFFFFF00 +#define SDMMC_TMOUT_RESP(n) ((n) & 0xFF) +#define SDMMC_TMOUT_RESP_MSK 0xFF +/* card-type register defines */ +#define SDMMC_CTYPE_8BIT BIT(16) +#define SDMMC_CTYPE_4BIT BIT(0) +#define SDMMC_CTYPE_1BIT 0 +/* Interrupt status & mask register defines */ +#define SDMMC_INT_SDIO BIT(16) +#define SDMMC_INT_EBE BIT(15) +#define SDMMC_INT_ACD BIT(14) +#define SDMMC_INT_SBE BIT(13) +#define SDMMC_INT_HLE BIT(12) +#define SDMMC_INT_FRUN BIT(11) +#define SDMMC_INT_HTO BIT(10) +#define SDMMC_INT_DTO BIT(9) +#define SDMMC_INT_RTO BIT(8) +#define SDMMC_INT_DCRC BIT(7) +#define SDMMC_INT_RCRC BIT(6) +#define SDMMC_INT_RXDR BIT(5) +#define SDMMC_INT_TXDR BIT(4) +#define SDMMC_INT_DATA_OVER BIT(3) +#define SDMMC_INT_CMD_DONE BIT(2) +#define SDMMC_INT_RESP_ERR BIT(1) +#define SDMMC_INT_CD BIT(0) +#define SDMMC_INT_ERROR 0xbfc2 +/* Command register defines */ +#define SDMMC_CMD_START BIT(31) +#define SDMMC_CMD_CCS_EXP BIT(23) +#define SDMMC_CMD_CEATA_RD BIT(22) +#define SDMMC_CMD_UPD_CLK BIT(21) +#define SDMMC_CMD_INIT BIT(15) +#define SDMMC_CMD_STOP BIT(14) +#define SDMMC_CMD_PRV_DAT_WAIT BIT(13) +#define SDMMC_CMD_SEND_STOP BIT(12) +#define SDMMC_CMD_STRM_MODE BIT(11) +#define SDMMC_CMD_DAT_WR BIT(10) +#define SDMMC_CMD_DAT_EXP BIT(9) +#define SDMMC_CMD_RESP_CRC BIT(8) +#define SDMMC_CMD_RESP_LONG BIT(7) +#define SDMMC_CMD_RESP_EXP BIT(6) +#define SDMMC_CMD_INDX(n) ((n) & 0x1F) +/* Status register defines */ +#define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FF) +#define SDMMC_FIFO_SZ 32 +/* Internal DMAC interrupt defines */ +#define SDMMC_IDMAC_INT_AI BIT(9) +#define SDMMC_IDMAC_INT_NI BIT(8) +#define SDMMC_IDMAC_INT_CES BIT(5) +#define SDMMC_IDMAC_INT_DU BIT(4) +#define SDMMC_IDMAC_INT_FBE BIT(2) +#define SDMMC_IDMAC_INT_RI BIT(1) +#define SDMMC_IDMAC_INT_TI BIT(0) +/* Internal DMAC bus mode bits */ +#define SDMMC_IDMAC_ENABLE BIT(7) +#define SDMMC_IDMAC_FB BIT(1) +#define SDMMC_IDMAC_SWRESET BIT(0) + +/* Register access macros */ +#define mci_readl(dev, reg) \ + __raw_readl(dev->regs + SDMMC_##reg) +#define mci_writel(dev, reg, value) \ + __raw_writel((value), dev->regs + SDMMC_##reg) + +/* 16-bit FIFO access macros */ +#define mci_readw(dev, reg) \ + __raw_readw(dev->regs + SDMMC_##reg) +#define mci_writew(dev, reg, value) \ + __raw_writew((value), dev->regs + SDMMC_##reg) + +/* 64-bit FIFO access macros */ +#ifdef readq +#define mci_readq(dev, reg) \ + __raw_readq(dev->regs + SDMMC_##reg) +#define mci_writeq(dev, reg, value) \ + __raw_writeq((value), dev->regs + SDMMC_##reg) +#else +/* + * Dummy readq implementation for architectures that don't define it. + * + * We would assume that none of these architectures would configure + * the IP block with a 64bit FIFO width, so this code will never be + * executed on those machines. Defining these macros here keeps the + * rest of the code free from ifdefs. + */ +#define mci_readq(dev, reg) \ + (*(volatile u64 __force *)(dev->regs + SDMMC_##reg)) +#define mci_writeq(dev, reg, value) \ + (*(volatile u64 __force *)(dev->regs + SDMMC_##reg) = value) +#endif + +#endif /* _DW_MMC_H_ */ diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h new file mode 100644 index 000000000000..16b0261763ed --- /dev/null +++ b/include/linux/mmc/dw_mmc.h @@ -0,0 +1,217 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MMC_DW_MMC_H_ +#define _LINUX_MMC_DW_MMC_H_ + +#define MAX_MCI_SLOTS 2 + +enum dw_mci_state { + STATE_IDLE = 0, + STATE_SENDING_CMD, + STATE_SENDING_DATA, + STATE_DATA_BUSY, + STATE_SENDING_STOP, + STATE_DATA_ERROR, +}; + +enum { + EVENT_CMD_COMPLETE = 0, + EVENT_XFER_COMPLETE, + EVENT_DATA_COMPLETE, + EVENT_DATA_ERROR, + EVENT_XFER_ERROR +}; + +struct mmc_data; + +/** + * struct dw_mci - MMC controller state shared between all slots + * @lock: Spinlock protecting the queue and associated data. + * @regs: Pointer to MMIO registers. + * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @pio_offset: Offset into the current scatterlist entry. + * @cur_slot: The slot which is currently using the controller. + * @mrq: The request currently being processed on @cur_slot, + * or NULL if the controller is idle. + * @cmd: The command currently being sent to the card, or NULL. + * @data: The data currently being transferred, or NULL if no data + * transfer is in progress. + * @use_dma: Whether DMA channel is initialized or not. + * @sg_dma: Bus address of DMA buffer. + * @sg_cpu: Virtual address of DMA buffer. + * @dma_ops: Pointer to platform-specific DMA callbacks. + * @cmd_status: Snapshot of SR taken upon completion of the current + * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @data_status: Snapshot of SR taken upon completion of the current + * data transfer. Only valid when EVENT_DATA_COMPLETE or + * EVENT_DATA_ERROR is pending. + * @stop_cmdr: Value to be loaded into CMDR when the stop command is + * to be sent. + * @dir_status: Direction of current transfer. + * @tasklet: Tasklet running the request state machine. + * @card_tasklet: Tasklet handling card detect. + * @pending_events: Bitmask of events flagged by the interrupt handler + * to be processed by the tasklet. + * @completed_events: Bitmask of events which the state machine has + * processed. + * @state: Tasklet state. + * @queue: List of slots waiting for access to the controller. + * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus + * rate and timeout calculations. + * @current_speed: Configured rate of the controller. + * @num_slots: Number of slots available. + * @pdev: Platform device associated with the MMC controller. + * @pdata: Platform data associated with the MMC controller. + * @slot: Slots sharing this MMC controller. + * @data_shift: log2 of FIFO item size. + * @push_data: Pointer to FIFO push function. + * @pull_data: Pointer to FIFO pull function. + * @quirks: Set of quirks that apply to specific versions of the IP. + * + * Locking + * ======= + * + * @lock is a softirq-safe spinlock protecting @queue as well as + * @cur_slot, @mrq and @state. These must always be updated + * at the same time while holding @lock. + * + * The @mrq field of struct dw_mci_slot is also protected by @lock, + * and must always be written at the same time as the slot is added to + * @queue. + * + * @pending_events and @completed_events are accessed using atomic bit + * operations, so they don't need any locking. + * + * None of the fields touched by the interrupt handler need any + * locking. However, ordering is important: Before EVENT_DATA_ERROR or + * EVENT_DATA_COMPLETE is set in @pending_events, all data-related + * interrupts must be disabled and @data_status updated with a + * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the + * CMDRDY interupt must be disabled and @cmd_status updated with a + * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the + * bytes_xfered field of @data must be written. This is ensured by + * using barriers. + */ +struct dw_mci { + spinlock_t lock; + void __iomem *regs; + + struct scatterlist *sg; + unsigned int pio_offset; + + struct dw_mci_slot *cur_slot; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + /* DMA interface members*/ + int use_dma; + + dma_addr_t sg_dma; + void *sg_cpu; + struct dw_mci_dma_ops *dma_ops; +#ifdef CONFIG_MMC_DW_IDMAC + unsigned int ring_size; +#else + struct dw_mci_dma_data *dma_data; +#endif + u32 cmd_status; + u32 data_status; + u32 stop_cmdr; + u32 dir_status; + struct tasklet_struct tasklet; + struct tasklet_struct card_tasklet; + unsigned long pending_events; + unsigned long completed_events; + enum dw_mci_state state; + struct list_head queue; + + u32 bus_hz; + u32 current_speed; + u32 num_slots; + struct platform_device *pdev; + struct dw_mci_board *pdata; + struct dw_mci_slot *slot[MAX_MCI_SLOTS]; + + /* FIFO push and pull */ + int data_shift; + void (*push_data)(struct dw_mci *host, void *buf, int cnt); + void (*pull_data)(struct dw_mci *host, void *buf, int cnt); + + /* Workaround flags */ + u32 quirks; +}; + +/* DMA ops for Internal/External DMAC interface */ +struct dw_mci_dma_ops { + /* DMA Ops */ + int (*init)(struct dw_mci *host); + void (*start)(struct dw_mci *host, unsigned int sg_len); + void (*complete)(struct dw_mci *host); + void (*stop)(struct dw_mci *host); + void (*cleanup)(struct dw_mci *host); + void (*exit)(struct dw_mci *host); +}; + +/* IP Quirks/flags. */ +/* No special quirks or flags to cater for */ +#define DW_MCI_QUIRK_NONE 0 +/* DTO fix for command transmission with IDMAC configured */ +#define DW_MCI_QUIRK_IDMAC_DTO 1 +/* delay needed between retries on some 2.11a implementations */ +#define DW_MCI_QUIRK_RETRY_DELAY 2 +/* High Speed Capable - Supports HS cards (upto 50MHz) */ +#define DW_MCI_QUIRK_HIGHSPEED 4 + + +struct dma_pdata; + +struct block_settings { + unsigned short max_segs; /* see blk_queue_max_segments */ + unsigned int max_blk_size; /* maximum size of one mmc block */ + unsigned int max_blk_count; /* maximum number of blocks in one req*/ + unsigned int max_req_size; /* maximum number of bytes in one req*/ + unsigned int max_seg_size; /* see blk_queue_max_segment_size */ +}; + +/* Board platform data */ +struct dw_mci_board { + u32 num_slots; + + u32 quirks; /* Workaround / Quirk flags */ + unsigned int bus_hz; /* Bus speed */ + + /* delay in mS before detecting cards after interrupt */ + u32 detect_delay_ms; + + int (*init)(u32 slot_id, irq_handler_t , void *); + int (*get_ro)(u32 slot_id); + int (*get_cd)(u32 slot_id); + int (*get_ocr)(u32 slot_id); + int (*get_bus_wd)(u32 slot_id); + /* + * Enable power to selected slot and set voltage to desired level. + * Voltage levels are specified using MMC_VDD_xxx defines defined + * in linux/mmc/host.h file. + */ + void (*setpower)(u32 slot_id, u32 volt); + void (*exit)(u32 slot_id); + void (*select_slot)(u32 slot_id); + + struct dw_mci_dma_ops *dma_ops; + struct dma_pdata *data; + struct block_settings *blk_settings; +}; + +#endif /* _LINUX_MMC_DW_MMC_H_ */ From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Dec 2010 09:59:44 +0100 Subject: [PATCH 23/39] mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap With the bus-width test patch, mmc_set_bus_width*() isn't called properly when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode. This patch fixes the regression by moving the call up before the cap test. Signed-off-by: Takashi Iwai Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1d8409fcf155..c86dd7384d7d 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -558,6 +558,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][0]); if (!err) { + mmc_set_bus_width_ddr(card->host, + bus_width, MMC_SDR_MODE); /* * If controller can't handle bus width test, * use the highest bus width to maintain @@ -565,8 +567,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) break; - mmc_set_bus_width_ddr(card->host, - bus_width, MMC_SDR_MODE); err = mmc_bus_test(card, bus_width); if (!err) break; From 807e8e40673d9628fa7dcdd14423424b4ee5f43b Mon Sep 17 00:00:00 2001 From: Andy Ross Date: Mon, 3 Jan 2011 10:36:56 -0800 Subject: [PATCH 24/39] mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross Reviewed-and-Tested-by: Hein Tibosch Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 119 ++++++++++++---------------------------- drivers/mmc/core/core.h | 6 +- drivers/mmc/core/mmc.c | 13 +++-- drivers/mmc/core/sd.c | 11 +++- drivers/mmc/core/sdio.c | 18 ++++-- 5 files changed, 68 insertions(+), 99 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 97e0624eb9b6..198f70bad908 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1485,25 +1485,41 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) } EXPORT_SYMBOL(mmc_set_blocklen); +static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) +{ + host->f_init = freq; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); +#endif + mmc_power_up(host); + sdio_reset(host); + mmc_go_idle(host); + + mmc_send_if_cond(host, host->ocr_avail); + + /* Order's important: probe SDIO, then SD, then MMC */ + if (!mmc_attach_sdio(host)) + return 0; + if (!mmc_attach_sd(host)) + return 0; + if (!mmc_attach_mmc(host)) + return 0; + + mmc_power_off(host); + return -EIO; +} + void mmc_rescan(struct work_struct *work) { + static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; struct mmc_host *host = container_of(work, struct mmc_host, detect.work); - u32 ocr; - int err; - unsigned long flags; int i; - const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; - spin_lock_irqsave(&host->lock, flags); - - if (host->rescan_disable) { - spin_unlock_irqrestore(&host->lock, flags); + if (host->rescan_disable) return; - } - - spin_unlock_irqrestore(&host->lock, flags); - mmc_bus_get(host); @@ -1526,8 +1542,6 @@ void mmc_rescan(struct work_struct *work) goto out; } - /* detect a newly inserted card */ - /* * Only we can add a new handler, so it's safe to * release the lock here. @@ -1537,77 +1551,16 @@ void mmc_rescan(struct work_struct *work) if (host->ops->get_cd && host->ops->get_cd(host) == 0) goto out; + mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { - mmc_claim_host(host); - - if (freqs[i] >= host->f_min) - host->f_init = freqs[i]; - else if (!i || freqs[i-1] > host->f_min) - host->f_init = host->f_min; - else { - mmc_release_host(host); - goto out; - } -#ifdef CONFIG_MMC_DEBUG - pr_info("%s: %s: trying to init card at %u Hz\n", - mmc_hostname(host), __func__, host->f_init); -#endif - mmc_power_up(host); - sdio_reset(host); - mmc_go_idle(host); - - mmc_send_if_cond(host, host->ocr_avail); - - /* - * First we search for SDIO... - */ - err = mmc_send_io_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sdio(host, ocr)) { - mmc_claim_host(host); - /* - * Try SDMEM (but not MMC) even if SDIO - * is broken. - */ - mmc_power_up(host); - sdio_reset(host); - mmc_go_idle(host); - mmc_send_if_cond(host, host->ocr_avail); - - if (mmc_send_app_op_cond(host, 0, &ocr)) - goto out_fail; - - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - } - goto out; - } - - /* - * ...then normal SD... - */ - err = mmc_send_app_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - goto out; - } - - /* - * ...and finally MMC. - */ - err = mmc_send_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_mmc(host, ocr)) - mmc_power_off(host); - goto out; - } - -out_fail: - mmc_release_host(host); - mmc_power_off(host); + if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + break; + if (freqs[i] < host->f_min) + break; } -out: + mmc_release_host(host); + + out: if (host->caps & MMC_CAP_NEEDS_POLL) mmc_schedule_delayed_work(&host->detect, HZ); } diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 026c975b99a9..ca1fdde29df6 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -57,9 +57,9 @@ void mmc_rescan(struct work_struct *work); void mmc_start_host(struct mmc_host *host); void mmc_stop_host(struct mmc_host *host); -int mmc_attach_mmc(struct mmc_host *host, u32 ocr); -int mmc_attach_sd(struct mmc_host *host, u32 ocr); -int mmc_attach_sdio(struct mmc_host *host, u32 ocr); +int mmc_attach_mmc(struct mmc_host *host); +int mmc_attach_sd(struct mmc_host *host); +int mmc_attach_sdio(struct mmc_host *host); /* Module parameters */ extern int use_spi_crc; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c86dd7384d7d..16006ef153fe 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -755,13 +755,18 @@ static void mmc_attach_bus_ops(struct mmc_host *host) /* * Starting point for MMC card init. */ -int mmc_attach_mmc(struct mmc_host *host, u32 ocr) +int mmc_attach_mmc(struct mmc_host *host) { int err; + u32 ocr; BUG_ON(!host); WARN_ON(!host->claimed); + err = mmc_send_op_cond(host, 0, &ocr); + if (err) + return err; + mmc_attach_bus_ops(host); if (host->ocr_avail_mmc) host->ocr_avail = host->ocr_avail_mmc; @@ -804,20 +809,20 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) goto err; mmc_release_host(host); - err = mmc_add_card(host->card); + mmc_claim_host(host); if (err) goto remove_card; return 0; remove_card: + mmc_release_host(host); mmc_remove_card(host->card); - host->card = NULL; mmc_claim_host(host); + host->card = NULL; err: mmc_detach_bus(host); - mmc_release_host(host); printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", mmc_hostname(host), err); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index de062ebd8b26..d18c32bca99b 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -764,13 +764,18 @@ static void mmc_sd_attach_bus_ops(struct mmc_host *host) /* * Starting point for SD card init. */ -int mmc_attach_sd(struct mmc_host *host, u32 ocr) +int mmc_attach_sd(struct mmc_host *host) { int err; + u32 ocr; BUG_ON(!host); WARN_ON(!host->claimed); + err = mmc_send_app_op_cond(host, 0, &ocr); + if (err) + return err; + mmc_sd_attach_bus_ops(host); if (host->ocr_avail_sd) host->ocr_avail = host->ocr_avail_sd; @@ -823,20 +828,20 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) goto err; mmc_release_host(host); - err = mmc_add_card(host->card); + mmc_claim_host(host); if (err) goto remove_card; return 0; remove_card: + mmc_release_host(host); mmc_remove_card(host->card); host->card = NULL; mmc_claim_host(host); err: mmc_detach_bus(host); - mmc_release_host(host); printk(KERN_ERR "%s: error %d whilst initialising SD card\n", mmc_hostname(host), err); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 82f4b9008987..5c4a54d9b6a4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -702,15 +702,19 @@ static const struct mmc_bus_ops mmc_sdio_ops = { /* * Starting point for SDIO card init. */ -int mmc_attach_sdio(struct mmc_host *host, u32 ocr) +int mmc_attach_sdio(struct mmc_host *host) { - int err; - int i, funcs; + int err, i, funcs; + u32 ocr; struct mmc_card *card; BUG_ON(!host); WARN_ON(!host->claimed); + err = mmc_send_io_op_cond(host, 0, &ocr); + if (err) + return err; + mmc_attach_bus(host, &mmc_sdio_ops); if (host->ocr_avail_sdio) host->ocr_avail = host->ocr_avail_sdio; @@ -783,12 +787,12 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) pm_runtime_enable(&card->sdio_func[i]->dev); } - mmc_release_host(host); - /* * First add the card to the driver model... */ + mmc_release_host(host); err = mmc_add_card(host->card); + mmc_claim_host(host); if (err) goto remove_added; @@ -806,15 +810,17 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) remove_added: /* Remove without lock if the device has been added. */ + mmc_release_host(host); mmc_sdio_remove(host); mmc_claim_host(host); remove: /* And with lock if it hasn't been added. */ + mmc_release_host(host); if (host->card) mmc_sdio_remove(host); + mmc_claim_host(host); err: mmc_detach_bus(host); - mmc_release_host(host); printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n", mmc_hostname(host), err); From c584179828b268152f5ff82dab529a2c095b09ac Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Tue, 4 Jan 2011 12:20:22 -0500 Subject: [PATCH 25/39] mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan. Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 198f70bad908..4b1d8fb04e9b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1531,9 +1531,11 @@ void mmc_rescan(struct work_struct *work) && mmc_card_is_removable(host)) host->bus_ops->detect(host); + /* + * Let mmc_bus_put() free the bus/bus_ops if we've found that + * the card is no longer present. + */ mmc_bus_put(host); - - mmc_bus_get(host); /* if there still is a card present, stop here */ From b37427b0a4e01ab5aaec1c9af7cef616ac4ce6d6 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Tue, 4 Jan 2011 12:39:20 -0500 Subject: [PATCH 26/39] mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK. Signed-off-by: Chris Ball Tested-by: Chris Ball Acked-by: Olof Johansson --- drivers/mmc/card/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 57e4416b9ef0..2a876c4099cd 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -16,6 +16,7 @@ config MMC_BLOCK config MMC_BLOCK_MINORS int "Number of minors per block device" + depends on MMC_BLOCK range 4 256 default 8 help From 1a2727e98786136fb968b18d96f8ecdd9ba38aa8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 4 Jan 2011 12:55:14 -0500 Subject: [PATCH 27/39] mmc: Register debugfs dir before calling card probe function. This way, the probe function may register debugfs files if it wants to. This fixes a bug with mmc_test where mmc_test_register_file_test() is called before the card's debugfs dir exists, and so it fails. Signed-off-by: Viresh Kumar Tested-by: Chris Ball Signed-off-by: Chris Ball --- drivers/mmc/core/bus.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index af8dc6a2a317..63667a8f140c 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -303,14 +303,14 @@ int mmc_add_card(struct mmc_card *card) type, card->rca); } - ret = device_add(&card->dev); - if (ret) - return ret; - #ifdef CONFIG_DEBUG_FS mmc_add_card_debugfs(card); #endif + ret = device_add(&card->dev); + if (ret) + return ret; + mmc_card_set_present(card); return 0; From 729b0c79c2c0f631bffe1be5abaf291febf7792f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 11 Nov 2010 12:15:06 +0100 Subject: [PATCH 28/39] mmc: tmio_mmc: allow multi-element scatter-gather lists The driver is capable of handling multi-element sg lists in both PIO and DMA modes. In DMA mode this also allows to use the DMA sg capability more efficiently and almost doubles the throughput. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index e7765a89593e..4e75799291ca 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -864,10 +864,15 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) goto host_free; mmc->ops = &tmio_mmc_ops; - mmc->caps = MMC_CAP_4_BIT_DATA; - mmc->caps |= pdata->capabilities; + mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->f_max = pdata->hclk; mmc->f_min = mmc->f_max / 512; + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * + mmc->max_segs; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; if (pdata->ocr_mask) mmc->ocr_avail = pdata->ocr_mask; else From ef17fee1e559b3faeb6f89963e78ad47731d18a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 11 Nov 2010 12:19:47 +0100 Subject: [PATCH 29/39] mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failure The easiest way to fall back to PIO, when a DMA descriptor allocation fails is to disable DMA on the controller but continue with the current request in PIO mode. This way tmio_mmc_start_dma() can become void, since it cannot be failing any more. The current version is also broken: it is testing a wrong pointer and thus failing to recognise, that a descriptor allocation wasn't successful. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 69 ++++++++++++++----------------------- drivers/mmc/host/tmio_mmc.h | 2 -- 2 files changed, 25 insertions(+), 46 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 4e75799291ca..63115a6de935 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -427,11 +427,12 @@ static void tmio_dma_complete(void *arg) enable_mmc_irqs(host, TMIO_STAT_DATAEND); } -static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) +static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_rx; + dma_cookie_t cookie; int ret; ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE); @@ -442,21 +443,20 @@ static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) } if (desc) { - host->desc = desc; desc->callback = tmio_dma_complete; desc->callback_param = host; - host->cookie = desc->tx_submit(desc); - if (host->cookie < 0) { - host->desc = NULL; - ret = host->cookie; + cookie = desc->tx_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; } else { chan->device->device_issue_pending(chan); } } dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, host->cookie, host->mrq); + __func__, host->sg_len, ret, cookie, host->mrq); - if (!host->desc) { + if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) ret = -EIO; @@ -471,23 +471,18 @@ static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); tmio_mmc_enable_dma(host, false); - reset(host); - /* Fail this request, let above layers recover */ - host->mrq->cmd->error = ret; - tmio_mmc_finish_request(host); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, - desc, host->cookie, host->sg_len); - - return ret > 0 ? 0 : ret; + desc, cookie, host->sg_len); } -static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) +static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_tx; + dma_cookie_t cookie; int ret; ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE); @@ -498,19 +493,18 @@ static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) } if (desc) { - host->desc = desc; desc->callback = tmio_dma_complete; desc->callback_param = host; - host->cookie = desc->tx_submit(desc); - if (host->cookie < 0) { - host->desc = NULL; - ret = host->cookie; + cookie = desc->tx_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; } } dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, host->cookie, host->mrq); + __func__, host->sg_len, ret, cookie, host->mrq); - if (!host->desc) { + if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) ret = -EIO; @@ -525,30 +519,22 @@ static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); tmio_mmc_enable_dma(host, false); - reset(host); - /* Fail this request, let above layers recover */ - host->mrq->cmd->error = ret; - tmio_mmc_finish_request(host); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, - desc, host->cookie); - - return ret > 0 ? 0 : ret; + desc, cookie); } -static int tmio_mmc_start_dma(struct tmio_mmc_host *host, +static void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { if (data->flags & MMC_DATA_READ) { if (host->chan_rx) - return tmio_mmc_start_dma_rx(host); + tmio_mmc_start_dma_rx(host); } else { if (host->chan_tx) - return tmio_mmc_start_dma_tx(host); + tmio_mmc_start_dma_tx(host); } - - return 0; } static void tmio_issue_tasklet_fn(unsigned long priv) @@ -584,9 +570,6 @@ static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) static void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) { - host->cookie = -EINVAL; - host->desc = NULL; - /* We can only either use DMA for both Tx and Rx or not use it at all */ if (pdata->dma) { dma_cap_mask_t mask; @@ -632,15 +615,11 @@ static void tmio_mmc_release_dma(struct tmio_mmc_host *host) host->chan_rx = NULL; dma_release_channel(chan); } - - host->cookie = -EINVAL; - host->desc = NULL; } #else -static int tmio_mmc_start_dma(struct tmio_mmc_host *host, +static void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { - return 0; } static void tmio_mmc_request_dma(struct tmio_mmc_host *host, @@ -682,7 +661,9 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host, sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); - return tmio_mmc_start_dma(host, data); + tmio_mmc_start_dma(host, data); + + return 0; } /* Process requests from the MMC layer */ diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 0fedc78e3ea5..0b7d9162c1b5 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -112,9 +112,7 @@ struct tmio_mmc_host { struct tasklet_struct dma_complete; struct tasklet_struct dma_issue; #ifdef CONFIG_TMIO_MMC_DMA - struct dma_async_tx_descriptor *desc; unsigned int dma_sglen; - dma_cookie_t cookie; #endif }; From e0bc6ff8b8d5c066d978d23e690d5599db4cb2b3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Nov 2010 17:24:11 +0100 Subject: [PATCH 30/39] mmc: tmio_mmc: merge the private header into the driver drivers/mmc/host/tmio_mmc.h is only used by drivers/mmc/host/tmio_mmc.c, this needlessly complicates source-code handling. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 215 +++++++++++++++++++++++++++++++++- drivers/mmc/host/tmio_mmc.h | 226 ------------------------------------ 2 files changed, 210 insertions(+), 231 deletions(-) delete mode 100644 drivers/mmc/host/tmio_mmc.h diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 63115a6de935..e04c032abb1c 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -25,16 +25,221 @@ * double buffer support * */ -#include -#include -#include + #include +#include #include -#include +#include +#include +#include +#include #include #include +#include +#include +#include +#include -#include "tmio_mmc.h" +#define CTL_SD_CMD 0x00 +#define CTL_ARG_REG 0x04 +#define CTL_STOP_INTERNAL_ACTION 0x08 +#define CTL_XFER_BLK_COUNT 0xa +#define CTL_RESPONSE 0x0c +#define CTL_STATUS 0x1c +#define CTL_IRQ_MASK 0x20 +#define CTL_SD_CARD_CLK_CTL 0x24 +#define CTL_SD_XFER_LEN 0x26 +#define CTL_SD_MEM_CARD_OPT 0x28 +#define CTL_SD_ERROR_DETAIL_STATUS 0x2c +#define CTL_SD_DATA_PORT 0x30 +#define CTL_TRANSACTION_CTL 0x34 +#define CTL_RESET_SD 0xe0 +#define CTL_SDIO_REGS 0x100 +#define CTL_CLK_AND_WAIT_CTL 0x138 +#define CTL_RESET_SDIO 0x1e0 + +/* Definitions for values the CTRL_STATUS register can take. */ +#define TMIO_STAT_CMDRESPEND 0x00000001 +#define TMIO_STAT_DATAEND 0x00000004 +#define TMIO_STAT_CARD_REMOVE 0x00000008 +#define TMIO_STAT_CARD_INSERT 0x00000010 +#define TMIO_STAT_SIGSTATE 0x00000020 +#define TMIO_STAT_WRPROTECT 0x00000080 +#define TMIO_STAT_CARD_REMOVE_A 0x00000100 +#define TMIO_STAT_CARD_INSERT_A 0x00000200 +#define TMIO_STAT_SIGSTATE_A 0x00000400 +#define TMIO_STAT_CMD_IDX_ERR 0x00010000 +#define TMIO_STAT_CRCFAIL 0x00020000 +#define TMIO_STAT_STOPBIT_ERR 0x00040000 +#define TMIO_STAT_DATATIMEOUT 0x00080000 +#define TMIO_STAT_RXOVERFLOW 0x00100000 +#define TMIO_STAT_TXUNDERRUN 0x00200000 +#define TMIO_STAT_CMDTIMEOUT 0x00400000 +#define TMIO_STAT_RXRDY 0x01000000 +#define TMIO_STAT_TXRQ 0x02000000 +#define TMIO_STAT_ILL_FUNC 0x20000000 +#define TMIO_STAT_CMD_BUSY 0x40000000 +#define TMIO_STAT_ILL_ACCESS 0x80000000 + +/* Define some IRQ masks */ +/* This is the mask used at reset by the chip */ +#define TMIO_MASK_ALL 0x837f031d +#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) +#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) +#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ + TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) +#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) + +#define enable_mmc_irqs(host, i) \ + do { \ + u32 mask;\ + mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ + mask &= ~((i) & TMIO_MASK_IRQ); \ + sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ + } while (0) + +#define disable_mmc_irqs(host, i) \ + do { \ + u32 mask;\ + mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ + mask |= ((i) & TMIO_MASK_IRQ); \ + sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ + } while (0) + +#define ack_mmc_irqs(host, i) \ + do { \ + sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ + } while (0) + + +struct tmio_mmc_host { + void __iomem *ctl; + unsigned long bus_shift; + struct mmc_command *cmd; + struct mmc_request *mrq; + struct mmc_data *data; + struct mmc_host *mmc; + int irq; + + /* Callbacks for clock / power control */ + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); + + /* pio related stuff */ + struct scatterlist *sg_ptr; + unsigned int sg_len; + unsigned int sg_off; + + struct platform_device *pdev; + + /* DMA support */ + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + struct tasklet_struct dma_complete; + struct tasklet_struct dma_issue; +#ifdef CONFIG_TMIO_MMC_DMA + unsigned int dma_sglen; +#endif +}; + +static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + readsw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)) | + readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; +} + +static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + writesw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); + writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); +} + +static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) +{ + host->sg_len = data->sg_len; + host->sg_ptr = data->sg; + host->sg_off = 0; +} + +static int tmio_mmc_next_sg(struct tmio_mmc_host *host) +{ + host->sg_ptr = sg_next(host->sg_ptr); + host->sg_off = 0; + return --host->sg_len; +} + +static char *tmio_mmc_kmap_atomic(struct scatterlist *sg, unsigned long *flags) +{ + local_irq_save(*flags); + return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; +} + +static void tmio_mmc_kunmap_atomic(void *virt, unsigned long *flags) +{ + kunmap_atomic(virt, KM_BIO_SRC_IRQ); + local_irq_restore(*flags); +} + +#ifdef CONFIG_MMC_DEBUG + +#define STATUS_TO_TEXT(a) \ + do { \ + if (status & TMIO_STAT_##a) \ + printk(#a); \ + } while (0) + +void pr_debug_status(u32 status) +{ + printk(KERN_DEBUG "status: %08x = ", status); + STATUS_TO_TEXT(CARD_REMOVE); + STATUS_TO_TEXT(CARD_INSERT); + STATUS_TO_TEXT(SIGSTATE); + STATUS_TO_TEXT(WRPROTECT); + STATUS_TO_TEXT(CARD_REMOVE_A); + STATUS_TO_TEXT(CARD_INSERT_A); + STATUS_TO_TEXT(SIGSTATE_A); + STATUS_TO_TEXT(CMD_IDX_ERR); + STATUS_TO_TEXT(STOPBIT_ERR); + STATUS_TO_TEXT(ILL_FUNC); + STATUS_TO_TEXT(CMD_BUSY); + STATUS_TO_TEXT(CMDRESPEND); + STATUS_TO_TEXT(DATAEND); + STATUS_TO_TEXT(CRCFAIL); + STATUS_TO_TEXT(DATATIMEOUT); + STATUS_TO_TEXT(CMDTIMEOUT); + STATUS_TO_TEXT(RXOVERFLOW); + STATUS_TO_TEXT(TXUNDERRUN); + STATUS_TO_TEXT(RXRDY); + STATUS_TO_TEXT(TXRQ); + STATUS_TO_TEXT(ILL_ACCESS); + printk("\n"); +} + +#else +#define pr_debug_status(s) do { } while (0) +#endif static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) { diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h deleted file mode 100644 index 0b7d9162c1b5..000000000000 --- a/drivers/mmc/host/tmio_mmc.h +++ /dev/null @@ -1,226 +0,0 @@ -/* Definitons for use with the tmio_mmc.c - * - * (c) 2004 Ian Molton - * (c) 2007 Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#define CTL_SD_CMD 0x00 -#define CTL_ARG_REG 0x04 -#define CTL_STOP_INTERNAL_ACTION 0x08 -#define CTL_XFER_BLK_COUNT 0xa -#define CTL_RESPONSE 0x0c -#define CTL_STATUS 0x1c -#define CTL_IRQ_MASK 0x20 -#define CTL_SD_CARD_CLK_CTL 0x24 -#define CTL_SD_XFER_LEN 0x26 -#define CTL_SD_MEM_CARD_OPT 0x28 -#define CTL_SD_ERROR_DETAIL_STATUS 0x2c -#define CTL_SD_DATA_PORT 0x30 -#define CTL_TRANSACTION_CTL 0x34 -#define CTL_RESET_SD 0xe0 -#define CTL_SDIO_REGS 0x100 -#define CTL_CLK_AND_WAIT_CTL 0x138 -#define CTL_RESET_SDIO 0x1e0 - -/* Definitions for values the CTRL_STATUS register can take. */ -#define TMIO_STAT_CMDRESPEND 0x00000001 -#define TMIO_STAT_DATAEND 0x00000004 -#define TMIO_STAT_CARD_REMOVE 0x00000008 -#define TMIO_STAT_CARD_INSERT 0x00000010 -#define TMIO_STAT_SIGSTATE 0x00000020 -#define TMIO_STAT_WRPROTECT 0x00000080 -#define TMIO_STAT_CARD_REMOVE_A 0x00000100 -#define TMIO_STAT_CARD_INSERT_A 0x00000200 -#define TMIO_STAT_SIGSTATE_A 0x00000400 -#define TMIO_STAT_CMD_IDX_ERR 0x00010000 -#define TMIO_STAT_CRCFAIL 0x00020000 -#define TMIO_STAT_STOPBIT_ERR 0x00040000 -#define TMIO_STAT_DATATIMEOUT 0x00080000 -#define TMIO_STAT_RXOVERFLOW 0x00100000 -#define TMIO_STAT_TXUNDERRUN 0x00200000 -#define TMIO_STAT_CMDTIMEOUT 0x00400000 -#define TMIO_STAT_RXRDY 0x01000000 -#define TMIO_STAT_TXRQ 0x02000000 -#define TMIO_STAT_ILL_FUNC 0x20000000 -#define TMIO_STAT_CMD_BUSY 0x40000000 -#define TMIO_STAT_ILL_ACCESS 0x80000000 - -/* Define some IRQ masks */ -/* This is the mask used at reset by the chip */ -#define TMIO_MASK_ALL 0x837f031d -#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) -#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) -#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ - TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) -#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) - - -#define enable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask &= ~((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define disable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask |= ((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define ack_mmc_irqs(host, i) \ - do { \ - sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ - } while (0) - - -struct tmio_mmc_host { - void __iomem *ctl; - unsigned long bus_shift; - struct mmc_command *cmd; - struct mmc_request *mrq; - struct mmc_data *data; - struct mmc_host *mmc; - int irq; - - /* Callbacks for clock / power control */ - void (*set_pwr)(struct platform_device *host, int state); - void (*set_clk_div)(struct platform_device *host, int state); - - /* pio related stuff */ - struct scatterlist *sg_ptr; - unsigned int sg_len; - unsigned int sg_off; - - struct platform_device *pdev; - - /* DMA support */ - struct dma_chan *chan_rx; - struct dma_chan *chan_tx; - struct tasklet_struct dma_complete; - struct tasklet_struct dma_issue; -#ifdef CONFIG_TMIO_MMC_DMA - unsigned int dma_sglen; -#endif -}; - -#include - -static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) -{ - return readw(host->ctl + (addr << host->bus_shift)); -} - -static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) -{ - readsw(host->ctl + (addr << host->bus_shift), buf, count); -} - -static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) -{ - return readw(host->ctl + (addr << host->bus_shift)) | - readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; -} - -static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, - u16 val) -{ - writew(val, host->ctl + (addr << host->bus_shift)); -} - -static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) -{ - writesw(host->ctl + (addr << host->bus_shift), buf, count); -} - -static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, - u32 val) -{ - writew(val, host->ctl + (addr << host->bus_shift)); - writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); -} - -#include -#include - -static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - host->sg_len = data->sg_len; - host->sg_ptr = data->sg; - host->sg_off = 0; -} - -static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host) -{ - host->sg_ptr = sg_next(host->sg_ptr); - host->sg_off = 0; - return --host->sg_len; -} - -static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg, - unsigned long *flags) -{ - local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; -} - -static inline void tmio_mmc_kunmap_atomic(void *virt, - unsigned long *flags) -{ - kunmap_atomic(virt, KM_BIO_SRC_IRQ); - local_irq_restore(*flags); -} - -#ifdef CONFIG_MMC_DEBUG - -#define STATUS_TO_TEXT(a) \ - do { \ - if (status & TMIO_STAT_##a) \ - printk(#a); \ - } while (0) - -void pr_debug_status(u32 status) -{ - printk(KERN_DEBUG "status: %08x = ", status); - STATUS_TO_TEXT(CARD_REMOVE); - STATUS_TO_TEXT(CARD_INSERT); - STATUS_TO_TEXT(SIGSTATE); - STATUS_TO_TEXT(WRPROTECT); - STATUS_TO_TEXT(CARD_REMOVE_A); - STATUS_TO_TEXT(CARD_INSERT_A); - STATUS_TO_TEXT(SIGSTATE_A); - STATUS_TO_TEXT(CMD_IDX_ERR); - STATUS_TO_TEXT(STOPBIT_ERR); - STATUS_TO_TEXT(ILL_FUNC); - STATUS_TO_TEXT(CMD_BUSY); - STATUS_TO_TEXT(CMDRESPEND); - STATUS_TO_TEXT(DATAEND); - STATUS_TO_TEXT(CRCFAIL); - STATUS_TO_TEXT(DATATIMEOUT); - STATUS_TO_TEXT(CMDTIMEOUT); - STATUS_TO_TEXT(RXOVERFLOW); - STATUS_TO_TEXT(TXUNDERRUN); - STATUS_TO_TEXT(RXRDY); - STATUS_TO_TEXT(TXRQ); - STATUS_TO_TEXT(ILL_ACCESS); - printk("\n"); -} - -#else -#define pr_debug_status(s) do { } while (0) -#endif From 93173054f2979de41b1912b19f0b57edfb35fcdc Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 22 Dec 2010 12:02:15 +0100 Subject: [PATCH 31/39] mmc: tmio_mmc: implement a bounce buffer for unaligned DMA For example, with SDIO WLAN cards, some transfers happen with buffers at odd addresses, whereas the SH-Mobile DMA engine requires even addresses for SDHI. This patch extends the tmio driver with a bounce buffer, that is used for single entry scatter-gather lists both for sending and receiving. If we ever encounter unaligned transfers with multi-element sg lists, this patch will have to be extended. For now it just falls back to PIO in this and other unsupported cases. Signed-off-by: Guennadi Liakhovetski Acked-by: Samuel Ortiz Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 89 ++++++++++++++++++++++++++++++++++--- include/linux/mfd/tmio.h | 1 + 2 files changed, 84 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index e04c032abb1c..595b7b3f160d 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -111,6 +111,8 @@ sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ } while (0) +/* This is arbitrary, just noone needed any higher alignment yet */ +#define MAX_ALIGN 4 struct tmio_mmc_host { void __iomem *ctl; @@ -127,6 +129,7 @@ struct tmio_mmc_host { /* pio related stuff */ struct scatterlist *sg_ptr; + struct scatterlist *sg_orig; unsigned int sg_len; unsigned int sg_off; @@ -139,9 +142,13 @@ struct tmio_mmc_host { struct tasklet_struct dma_issue; #ifdef CONFIG_TMIO_MMC_DMA unsigned int dma_sglen; + u8 bounce_buf[PAGE_CACHE_SIZE] __attribute__((aligned(MAX_ALIGN))); + struct scatterlist bounce_sg; #endif }; +static void tmio_check_bounce_buffer(struct tmio_mmc_host *host); + static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) { return readw(host->ctl + (addr << host->bus_shift)); @@ -180,6 +187,7 @@ static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) { host->sg_len = data->sg_len; host->sg_ptr = data->sg; + host->sg_orig = data->sg; host->sg_off = 0; } @@ -438,6 +446,8 @@ static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) if (data->flags & MMC_DATA_READ) { if (!host->chan_rx) disable_mmc_irqs(host, TMIO_MASK_READOP); + else + tmio_check_bounce_buffer(host); dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", host->mrq); } else { @@ -529,8 +539,7 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, if (!host->chan_rx) enable_mmc_irqs(host, TMIO_MASK_READOP); } else { - struct dma_chan *chan = host->chan_tx; - if (!chan) + if (!host->chan_tx) enable_mmc_irqs(host, TMIO_MASK_WRITEOP); else tasklet_schedule(&host->dma_issue); @@ -612,6 +621,16 @@ out: } #ifdef CONFIG_TMIO_MMC_DMA +static void tmio_check_bounce_buffer(struct tmio_mmc_host *host) +{ + if (host->sg_ptr == &host->bounce_sg) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); + memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(sg_vaddr, &flags); + } +} + static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) { #if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) @@ -634,11 +653,35 @@ static void tmio_dma_complete(void *arg) static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) { - struct scatterlist *sg = host->sg_ptr; + struct scatterlist *sg = host->sg_ptr, *sg_tmp; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_rx; + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; dma_cookie_t cookie; - int ret; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + align >= MAX_ALIGN)) || !multiple) + goto pio; + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE); if (ret > 0) { @@ -661,6 +704,7 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); +pio: if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) @@ -684,11 +728,39 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) { - struct scatterlist *sg = host->sg_ptr; + struct scatterlist *sg = host->sg_ptr, *sg_tmp; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_tx; + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; dma_cookie_t cookie; - int ret; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + align >= MAX_ALIGN)) || !multiple) + goto pio; + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags); + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(sg_vaddr, &flags); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE); if (ret > 0) { @@ -709,6 +781,7 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); +pio: if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) @@ -822,6 +895,10 @@ static void tmio_mmc_release_dma(struct tmio_mmc_host *host) } } #else +static void tmio_check_bounce_buffer(struct tmio_mmc_host *host) +{ +} + static void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 085f041197dc..dbfc053b1f95 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -66,6 +66,7 @@ void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); struct tmio_mmc_dma { void *chan_priv_tx; void *chan_priv_rx; + int alignment_shift; }; /* From eba46030e1727f2af377300b6a55df846fa830f1 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Sun, 19 Dec 2010 21:16:07 +0000 Subject: [PATCH 32/39] mmc: tmio_mmc: silence compiler warnings with "mmc: tmio: implement a bounce buffer for unaligned DMA" gcc generates the following warnings: drivers/mmc/host/tmio_mmc.c:654:6: warning: 'ret' may be used uninitialized in this function drivers/mmc/host/tmio_mmc.c:730:6: warning: 'ret' may be used uninitialized in this function This patch fixes these by setting ret to -EINVAL in the affected code paths. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 595b7b3f160d..f442c8205b0a 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -673,8 +673,10 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) } if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || - align >= MAX_ALIGN)) || !multiple) + align >= MAX_ALIGN)) || !multiple) { + ret = -EINVAL; goto pio; + } /* The only sg element can be unaligned, use our bounce buffer then */ if (!aligned) { @@ -748,8 +750,10 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) } if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || - align >= MAX_ALIGN)) || !multiple) + align >= MAX_ALIGN)) || !multiple) { + ret = -EINVAL; goto pio; + } /* The only sg element can be unaligned, use our bounce buffer then */ if (!aligned) { From 39a65a0dbbf73403daa9f4cc0ab30957ba61e60f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Nov 2010 17:24:19 +0100 Subject: [PATCH 33/39] mfd: sdhi: require the tmio-mmc driver to bounce unaligned buffers The SDHI controller on SH-Mobile SoCs requires even buffer addresses, when used with DMA. Signed-off-by: Guennadi Liakhovetski Acked-by: Samuel Ortiz Signed-off-by: Chris Ball --- drivers/mfd/sh_mobile_sdhi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c index f1714f93af9d..3ca20ecaac7e 100644 --- a/drivers/mfd/sh_mobile_sdhi.c +++ b/drivers/mfd/sh_mobile_sdhi.c @@ -136,6 +136,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) priv->param_rx.slave_id = p->dma_slave_rx; priv->dma_priv.chan_priv_tx = &priv->param_tx; priv->dma_priv.chan_priv_rx = &priv->param_rx; + priv->dma_priv.alignment_shift = 1; /* 2-byte alignment */ mmc_data->dma = &priv->dma_priv; } From 845ecd20239c28e97e766ff54078a58be19f3a91 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Tue, 28 Dec 2010 23:22:31 +0100 Subject: [PATCH 34/39] mmc: tmio_mmc: implement SDIO IRQ support This patch implements SDIO IRQ support for mfds which announce the TMIO_MMC_SDIO_IRQ flag for tmio_mmc. If MMC_CAP_SDIO_IRQ is also set SDIO IRQ signalling is activated. Tested with a b43-based wireless SDIO card and sh_mobile_sdhi. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 79 +++++++++++++++++++++++++++++++++++++ include/linux/mfd/tmio.h | 4 ++ 2 files changed, 83 insertions(+) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index f442c8205b0a..81bed310ddcd 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -53,6 +53,8 @@ #define CTL_SD_ERROR_DETAIL_STATUS 0x2c #define CTL_SD_DATA_PORT 0x30 #define CTL_TRANSACTION_CTL 0x34 +#define CTL_SDIO_STATUS 0x36 +#define CTL_SDIO_IRQ_MASK 0x38 #define CTL_RESET_SD 0xe0 #define CTL_SDIO_REGS 0x100 #define CTL_CLK_AND_WAIT_CTL 0x138 @@ -81,6 +83,12 @@ #define TMIO_STAT_CMD_BUSY 0x40000000 #define TMIO_STAT_ILL_ACCESS 0x80000000 +/* Definitions for values the CTRL_SDIO_STATUS register can take. */ +#define TMIO_SDIO_STAT_IOIRQ 0x0001 +#define TMIO_SDIO_STAT_EXPUB52 0x4000 +#define TMIO_SDIO_STAT_EXWT 0x8000 +#define TMIO_SDIO_MASK_ALL 0xc007 + /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ #define TMIO_MASK_ALL 0x837f031d @@ -122,6 +130,7 @@ struct tmio_mmc_host { struct mmc_data *data; struct mmc_host *mmc; int irq; + unsigned int sdio_irq_enabled; /* Callbacks for clock / power control */ void (*set_pwr)(struct platform_device *host, int state); @@ -249,6 +258,22 @@ void pr_debug_status(u32 status) #define pr_debug_status(s) do { } while (0) #endif +static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (enable) { + host->sdio_irq_enabled = 1; + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, + (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ)); + } else { + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL); + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); + host->sdio_irq_enabled = 0; + } +} + static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) { u32 clk = 0, clock; @@ -268,8 +293,23 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; + + /* + * Testing on sh-mobile showed that SDIO IRQs are unmasked when + * CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the + * device IRQ here and restore the SDIO IRQ mask before + * re-enabling the device IRQ. + */ + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + disable_irq(host->irq); sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); msleep(10); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) { + tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); + enable_irq(host->irq); + } sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); @@ -277,11 +317,21 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); + /* see comment in tmio_mmc_clk_stop above */ + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + disable_irq(host->irq); sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); msleep(10); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) { + tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); + enable_irq(host->irq); + } } static void reset(struct tmio_mmc_host *host) @@ -554,7 +604,10 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, static irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; unsigned int ireg, irq_mask, status; + unsigned int sdio_ireg, sdio_irq_mask, sdio_status; pr_debug("MMC IRQ begin\n"); @@ -562,6 +615,29 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); ireg = status & TMIO_MASK_IRQ & ~irq_mask; + sdio_ireg = 0; + if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) { + sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS); + sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK); + sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask; + + sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL); + + if (sdio_ireg && !host->sdio_irq_enabled) { + pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n", + sdio_status, sdio_irq_mask, sdio_ireg); + tmio_mmc_enable_sdio_irq(host->mmc, 0); + goto out; + } + + if (host->mmc->caps & MMC_CAP_SDIO_IRQ && + sdio_ireg & TMIO_SDIO_STAT_IOIRQ) + mmc_signal_sdio_irq(host->mmc); + + if (sdio_ireg) + goto out; + } + pr_debug_status(status); pr_debug_status(ireg); @@ -1047,6 +1123,7 @@ static const struct mmc_host_ops tmio_mmc_ops = { .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = tmio_mmc_get_cd, + .enable_sdio_irq = tmio_mmc_enable_sdio_irq, }; #ifdef CONFIG_PM @@ -1162,6 +1239,8 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) goto cell_disable; disable_mmc_irqs(host, TMIO_MASK_ALL); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + tmio_mmc_enable_sdio_irq(mmc, 0); ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index dbfc053b1f95..8e70310ee945 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -57,6 +57,10 @@ * is configured in 4-bit mode. */ #define TMIO_MMC_BLKSZ_2BYTES (1 << 1) +/* + * Some controllers can support SDIO IRQ signalling. + */ +#define TMIO_MMC_SDIO_IRQ (1 << 2) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); From 23b66071e8ce7f359a0e410a8a3514bd3179e92e Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Tue, 28 Dec 2010 23:22:32 +0100 Subject: [PATCH 35/39] mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc The SDHI Controller on SH-Mobile SoCs supports SDIO IRQ signalling. This patch advertises this fact to the tmio_mmc driver. Signed-off-by: Arnd Hannemann Acked-by: Samuel Ortiz Signed-off-by: Chris Ball --- drivers/mfd/sh_mobile_sdhi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c index 3ca20ecaac7e..0a7df44a93c0 100644 --- a/drivers/mfd/sh_mobile_sdhi.c +++ b/drivers/mfd/sh_mobile_sdhi.c @@ -131,6 +131,11 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) */ mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; + /* + * All SDHI blocks support SDIO IRQ signalling. + */ + mmc_data->flags |= TMIO_MMC_SDIO_IRQ; + if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { priv->param_tx.slave_id = p->dma_slave_tx; priv->param_rx.slave_id = p->dma_slave_rx; From 6ff56e0d8e02df023440ea65774cf1d15e669ece Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Wed, 5 Jan 2011 17:36:14 -0500 Subject: [PATCH 36/39] mmc: tmio_mmc: handle missing HW interrupts When doing excessive hotplug, e.g., repeated insert/eject operations, the hardware may get confused to a point where no CMDTIMEOUT/CMDRESPEND interrupts are generated any more. As a result requests get stuck, e.g.: [ 360.351562] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 360.351562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.359375] kworker/u:0 D c020c2b4 0 5 2 0x00000000 [ 360.367187] Backtrace: [ 360.367187] [] (schedule+0x0/0x340) from [] (schedule_timeout+0x20/0x190) [ 360.375000] r8:c702fd70 r7:00000002 r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.375000] r3:c701e040 [ 360.382812] [] (schedule_timeout+0x0/0x190) from [] (wait_for_common+0xc4/0x150) [ 360.390625] r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.390625] [] (wait_for_common+0x0/0x150) from [] (wait_for_completion+0x18/0x1c) [ 360.398437] [] (wait_for_completion+0x0/0x1c) from [] (mmc_wait_for_req+0x214/0x234) [ 360.406250] [] (mmc_wait_for_req+0x0/0x234) from [] (mmc_sd_switch+0xfc/0x114) [ 360.414062] r7:c702fe4c r6:c702fe20 r5:c7179800 r4:00fffff0 [ 360.421875] [] (mmc_sd_switch+0x0/0x114) from [] (mmc_sd_setup_card+0x260/0x384) [ 360.429687] [] (mmc_sd_setup_card+0x0/0x384) from [] (mmc_sd_init_card+0x13c/0x1e0) [ 360.437500] [] (mmc_sd_init_card+0x0/0x1e0) from [] (mmc_attach_sd+0x124/0x1a8) [ 360.445312] r8:c02db404 r7:ffffff92 r6:c702ff34 r5:c6007da8 r4:c6007c00 [ 360.453125] [] (mmc_attach_sd+0x0/0x1a8) from [] (mmc_rescan+0x248/0x2f0) [ 360.460937] r5:c6007da8 r4:c6007c00 [ 360.468750] [] (mmc_rescan+0x0/0x2f0) from [] (process_one_work+0x1ec/0x318) [ 360.476562] r7:c6007da8 r6:00000000 r5:c710ec00 r4:c701bde0 [ 360.484375] [] (process_one_work+0x0/0x318) from [] (worker_thread+0x1b0/0x2cc) [ 360.492187] [] (worker_thread+0x0/0x2cc) from [] (kthread+0x8c/0x94) [ 360.500000] [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x590) [ 360.507812] r7:00000013 r6:c0037fc4 r5:c004b2ac r4:c7021f00 This patch addresses this problem by introducing timeouts for outstanding interrupts. If a hardware interrupt is missing, a soft reset will be performed to bring the hardware back to a working state. Tested with the SDHI hardware block in sh7372 / AP4EVB. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 90 +++++++++++++++++++++++++++++++++++-- 1 file changed, 86 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 81bed310ddcd..689a3692242e 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -39,6 +39,8 @@ #include #include #include +#include +#include #define CTL_SD_CMD 0x00 #define CTL_ARG_REG 0x04 @@ -154,6 +156,11 @@ struct tmio_mmc_host { u8 bounce_buf[PAGE_CACHE_SIZE] __attribute__((aligned(MAX_ALIGN))); struct scatterlist bounce_sg; #endif + + /* Track lost interrupts */ + struct delayed_work delayed_reset_work; + spinlock_t lock; + unsigned long last_req_ts; }; static void tmio_check_bounce_buffer(struct tmio_mmc_host *host); @@ -345,15 +352,60 @@ static void reset(struct tmio_mmc_host *host) msleep(10); } +static void tmio_mmc_reset_work(struct work_struct *work) +{ + struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, + delayed_reset_work.work); + struct mmc_request *mrq; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + mrq = host->mrq; + + /* request already finished */ + if (!mrq + || time_is_after_jiffies(host->last_req_ts + + msecs_to_jiffies(2000))) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + dev_warn(&host->pdev->dev, + "timeout waiting for hardware interrupt (CMD%u)\n", + mrq->cmd->opcode); + + if (host->data) + host->data->error = -ETIMEDOUT; + else if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + mrq->cmd->error = -ETIMEDOUT; + + host->cmd = NULL; + host->data = NULL; + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + + reset(host); + + mmc_request_done(host->mmc, mrq); +} + static void tmio_mmc_finish_request(struct tmio_mmc_host *host) { struct mmc_request *mrq = host->mrq; + if (!mrq) + return; + host->mrq = NULL; host->cmd = NULL; host->data = NULL; + cancel_delayed_work(&host->delayed_reset_work); + mmc_request_done(host->mmc, mrq); } @@ -463,6 +515,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) return; } +/* needs to be called with host->lock held */ static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; @@ -519,10 +572,12 @@ static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) static void tmio_mmc_data_irq(struct tmio_mmc_host *host) { - struct mmc_data *data = host->data; + struct mmc_data *data; + spin_lock(&host->lock); + data = host->data; if (!data) - return; + goto out; if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) { /* @@ -543,6 +598,8 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) } else { tmio_mmc_do_data_irq(host); } +out: + spin_unlock(&host->lock); } static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, @@ -551,9 +608,11 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, struct mmc_command *cmd = host->cmd; int i, addr; + spin_lock(&host->lock); + if (!host->cmd) { pr_debug("Spurious CMD irq\n"); - return; + goto out; } host->cmd = NULL; @@ -598,6 +657,9 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, tmio_mmc_finish_request(host); } +out: + spin_unlock(&host->lock); + return; } @@ -906,6 +968,12 @@ static void tmio_issue_tasklet_fn(unsigned long priv) static void tmio_tasklet_fn(unsigned long arg) { struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (!host->data) + goto out; if (host->data->flags & MMC_DATA_READ) dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, @@ -915,6 +983,8 @@ static void tmio_tasklet_fn(unsigned long arg) DMA_TO_DEVICE); tmio_mmc_do_data_irq(host); +out: + spin_unlock_irqrestore(&host->lock, flags); } /* It might be necessary to make filter MFD specific */ @@ -1037,6 +1107,8 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) if (host->mrq) pr_debug("request not null\n"); + host->last_req_ts = jiffies; + wmb(); host->mrq = mrq; if (mrq->data) { @@ -1046,10 +1118,14 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) } ret = tmio_mmc_start_command(host, mrq->cmd); - if (!ret) + if (!ret) { + schedule_delayed_work(&host->delayed_reset_work, + msecs_to_jiffies(2000)); return; + } fail: + host->mrq = NULL; mrq->cmd->error = ret; mmc_request_done(mmc, mrq); } @@ -1247,6 +1323,11 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (ret) goto cell_disable; + spin_lock_init(&host->lock); + + /* Init delayed work for request timeouts */ + INIT_DELAYED_WORK(&host->delayed_reset_work, tmio_mmc_reset_work); + /* See if we also get DMA */ tmio_mmc_request_dma(host, pdata); @@ -1285,6 +1366,7 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev) if (mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); mmc_remove_host(mmc); + cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); free_irq(host->irq, host); if (cell->disable) From 2bd6a935555b06622fa7f47a9c411b8a7812e4dc Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Wed, 29 Dec 2010 14:21:14 +0100 Subject: [PATCH 37/39] mmc: tmio_mmc: fix CMD irq handling With current code card insert/eject interrupts will acknowledge outstanding commands. Normally this seems to be no problem, however if the hardware gets stuck and no interrupts for CMD_TIMEOUT or CMD_RESPEND are generated, then inserting and ejecting cards will falsely acknowledge outstanding commands from the core. This patch changes the behavior so that CMDs are only acked, if CMD_TIMEOUT or CMD_RESPEND is received. Signed-off-by: Arnd Hannemann Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 689a3692242e..e3c6ef208391 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -727,8 +727,10 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) */ /* Command completion */ - if (ireg & TMIO_MASK_CMD) { - ack_mmc_irqs(host, TMIO_MASK_CMD); + if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { + ack_mmc_irqs(host, + TMIO_STAT_CMDRESPEND | + TMIO_STAT_CMDTIMEOUT); tmio_mmc_cmd_irq(host, status); } From e9b86841b372de01ae865080118e29159d8b7c39 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 5 Jan 2011 00:44:32 +0100 Subject: [PATCH 38/39] mmc: fix division by zero in MMC core The card is not always clocked and the clock frequency zero is perfectly legal, thus this code in mmc_set_data_timeout() may cause a division by zero. It will be triggered more often if you're using software clock gating but can be triggered under other conditions too. Reported-by: Pierre Tardy Signed-off-by: Linus Walleij Reviewed-by: Chris Ball Cc: Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 4b1d8fb04e9b..6625c057be05 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -299,8 +299,9 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) unsigned int timeout_us, limit_us; timeout_us = data->timeout_ns / 1000; - timeout_us += data->timeout_clks * 1000 / - (mmc_host_clk_rate(card->host) / 1000); + if (mmc_host_clk_rate(card->host)) + timeout_us += data->timeout_clks * 1000 / + (mmc_host_clk_rate(card->host) / 1000); if (data->flags & MMC_DATA_WRITE) /* From f9db92cb8084c756890ddf953e9329588c59e8e8 Mon Sep 17 00:00:00 2001 From: Alagu Sankar Date: Mon, 3 Jan 2011 12:43:27 +0530 Subject: [PATCH 39/39] mmc: davinci: add support for SDIO irq handling This patch adds support for handling SDIO interrupt on DaVinci MMC/SD controller. The patch has been tested on DM355 and DA850 EVMs with Marvell Libertas based SDIO wireless LAN card. Signed-off-by: Alagu Sankar Signed-off-by: Sekhar Nori Signed-off-by: Chris Ball --- drivers/mmc/host/davinci_mmc.c | 78 +++++++++++++++++++++++++++++++--- 1 file changed, 73 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index b643ddef4f70..0076c7448fe6 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -66,8 +66,8 @@ #define DAVINCI_MMCBLNC 0x60 #define DAVINCI_SDIOCTL 0x64 #define DAVINCI_SDIOST0 0x68 -#define DAVINCI_SDIOEN 0x6C -#define DAVINCI_SDIOST 0x70 +#define DAVINCI_SDIOIEN 0x6C +#define DAVINCI_SDIOIST 0x70 #define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */ /* DAVINCI_MMCCTL definitions */ @@ -131,6 +131,14 @@ #define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */ #define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */ +/* DAVINCI_SDIOST0 definitions */ +#define SDIOST0_DAT1_HI BIT(0) + +/* DAVINCI_SDIOIEN definitions */ +#define SDIOIEN_IOINTEN BIT(0) + +/* DAVINCI_SDIOIST definitions */ +#define SDIOIST_IOINT BIT(0) /* MMCSD Init clock in Hz in opendrain mode */ #define MMCSD_INIT_CLOCK 200000 @@ -164,7 +172,7 @@ struct mmc_davinci_host { unsigned int mmc_input_clk; void __iomem *base; struct resource *mem_res; - int irq; + int mmc_irq, sdio_irq; unsigned char bus_mode; #define DAVINCI_MMC_DATADIR_NONE 0 @@ -184,6 +192,7 @@ struct mmc_davinci_host { u32 rxdma, txdma; bool use_dma; bool do_dma; + bool sdio_int; /* Scatterlist DMA uses one or more parameter RAM entries: * the main one (associated with rxdma or txdma) plus zero or @@ -866,6 +875,19 @@ mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data) { host->data = NULL; + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) { + /* + * SDIO Interrupt Detection work-around as suggested by + * Davinci Errata (TMS320DM355 Silicon Revision 1.1 Errata + * 2.1.6): Signal SDIO interrupt only if it is enabled by core + */ + if (host->sdio_int && !(readl(host->base + DAVINCI_SDIOST0) & + SDIOST0_DAT1_HI)) { + writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } + } + if (host->do_dma) { davinci_abort_dma(host); @@ -932,6 +954,21 @@ davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data) mmc_davinci_reset_ctrl(host, 0); } +static irqreturn_t mmc_davinci_sdio_irq(int irq, void *dev_id) +{ + struct mmc_davinci_host *host = dev_id; + unsigned int status; + + status = readl(host->base + DAVINCI_SDIOIST); + if (status & SDIOIST_IOINT) { + dev_dbg(mmc_dev(host->mmc), + "SDIO interrupt status %x\n", status); + writel(status | SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } + return IRQ_HANDLED; +} + static irqreturn_t mmc_davinci_irq(int irq, void *dev_id) { struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id; @@ -1076,11 +1113,32 @@ static int mmc_davinci_get_ro(struct mmc_host *mmc) return config->get_ro(pdev->id); } +static void mmc_davinci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct mmc_davinci_host *host = mmc_priv(mmc); + + if (enable) { + if (!(readl(host->base + DAVINCI_SDIOST0) & SDIOST0_DAT1_HI)) { + writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } else { + host->sdio_int = true; + writel(readl(host->base + DAVINCI_SDIOIEN) | + SDIOIEN_IOINTEN, host->base + DAVINCI_SDIOIEN); + } + } else { + host->sdio_int = false; + writel(readl(host->base + DAVINCI_SDIOIEN) & ~SDIOIEN_IOINTEN, + host->base + DAVINCI_SDIOIEN); + } +} + static struct mmc_host_ops mmc_davinci_ops = { .request = mmc_davinci_request, .set_ios = mmc_davinci_set_ios, .get_cd = mmc_davinci_get_cd, .get_ro = mmc_davinci_get_ro, + .enable_sdio_irq = mmc_davinci_enable_sdio_irq, }; /*----------------------------------------------------------------------*/ @@ -1209,7 +1267,8 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) host->nr_sg = MAX_NR_SG; host->use_dma = use_dma; - host->irq = irq; + host->mmc_irq = irq; + host->sdio_irq = platform_get_irq(pdev, 1); if (host->use_dma && davinci_acquire_dma_channels(host) != 0) host->use_dma = 0; @@ -1270,6 +1329,13 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) if (ret) goto out; + if (host->sdio_irq >= 0) { + ret = request_irq(host->sdio_irq, mmc_davinci_sdio_irq, 0, + mmc_hostname(mmc), host); + if (!ret) + mmc->caps |= MMC_CAP_SDIO_IRQ; + } + rename_region(mem, mmc_hostname(mmc)); dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n", @@ -1313,7 +1379,9 @@ static int __exit davinci_mmcsd_remove(struct platform_device *pdev) mmc_davinci_cpufreq_deregister(host); mmc_remove_host(host->mmc); - free_irq(host->irq, host); + free_irq(host->mmc_irq, host); + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) + free_irq(host->sdio_irq, host); davinci_release_dma_channels(host);