Linux 5.10-rc5

-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+69egeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTSYH/ifRBlaxy5UiHFc0
 2zdR7pkjWrYfDTTT3sazIAhdlzzcfnkUqgFxOP45F4ZIqeTzunH3sUY+5UlT9IX7
 liUgnLxQ/1R9Gx8kPGQfu+tLCey78xVFydGsqJoW9sPRw2R+apMdGGa/lOrk+OXz
 DXIN+dDnGFqwCCNJpK+rxQQhFf++IPpSI8z6Y23moOFhsDZrEziHuVFy2FGyRM6z
 prZ/us/tcobE8ptCk1RmOxLoJ1DR6UxpA2vLimTE+JD8siOsSWPbjE0KudnWCnd5
 BLqIjrsPJbSxyuzzK3v9dnO5wMv7tMDuMIuYM/MQTXDttNwtsqt/aP6gdnUCym7N
 5eHEj5g=
 =MuO1
 -----END PGP SIGNATURE-----

Merge tag 'v5.10-rc5' into rdma.git for-next

For dependencies in following patches

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

.mailmap

@@ -82,7 +82,10 @@ Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
 <dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
-Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_eremin@mentor.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>

CREDITS

@@ -98,7 +98,7 @@ N: Erik Andersen
 E: andersen@codepoet.org
 W: https://www.codepoet.org/
 P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301  0C82 5F9B 643E 30D3 9057
-D: Maintainer of ide-cd and Uniform CD-ROM driver, 
+D: Maintainer of ide-cd and Uniform CD-ROM driver,
 D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
 S: 352 North 525 East
 S: Springville, Utah 84663
@@ -263,7 +263,7 @@ N: Paul Barton-Davis
 E: pbd@op.net
 D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
 D: Various bugfixes and changes to sound drivers
-S: USA 
+S: USA
 
 N: Carlos Henrique Bauer
 E: chbauer@acm.org
@@ -849,6 +849,12 @@ D: trivial hack to add variable address length routing to Rose.
 D: AX25-HOWTO, HAM-HOWTO, IPX-HOWTO, NET-2-HOWTO
 D: ax25-utils maintainer.
 
+N: Kamil Debski
+E: kamil@wypas.org
+D: Samsung S5P 2D graphics acceleration and Multi Format Codec drivers
+D: Samsung USB2 phy drivers
+D: PWM fan driver
+
 N: Helge Deller
 E: deller@gmx.de
 W: http://www.parisc-linux.org/
@@ -1199,7 +1205,7 @@ N: Daniel J. Frasnelli
 E: dfrasnel@alphalinux.org
 W: http://www.alphalinux.org/
 P: 1024/3EF87611 B9 F1 44 50 D3 E8 C2 80  DA E5 55 AA 56 7C 42 DA
-D: DEC Alpha hacker 
+D: DEC Alpha hacker
 D: Miscellaneous bug squisher
 
 N: Jim Freeman
@@ -1299,7 +1305,7 @@ S: P.O. Box 76, Epping
 S: New South Wales, 2121
 S: Australia
 
-N: Carlos E. Gorges 
+N: Carlos E. Gorges
 E: carlos@techlinux.com.br
 D: fix smp support on cmpci driver
 P: 2048G/EA3C4B19 FF31 33A6 0362 4915 B7EB  E541 17D0 0379 EA3C 4B19
@@ -1340,7 +1346,7 @@ E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com
 D: Current Belkin USB Serial Adapter F5U103 hacker
 D: Kernel hacker, embedded systems
-S: 7802 Fitzwater Road   
+S: 7802 Fitzwater Road
 S: Brecksville, OH  44141-1334
 S: USA
 
@@ -1381,7 +1387,7 @@ N: Grant Guenther
 E: grant@torque.net
 W: http://www.torque.net/linux-pp.html
 D: original author of ppa driver for parallel port ZIP drive
-D: original architect of the parallel-port sharing scheme 
+D: original architect of the parallel-port sharing scheme
 D: PARIDE subsystem: drivers for parallel port IDE & ATAPI devices
 S: 44 St. Joseph Street, Suite 506
 S: Toronto, Ontario, M4Y 2W4
@@ -1523,7 +1529,7 @@ N: Benjamin Herrenschmidt
 E: benh@kernel.crashing.org
 D: Various parts of PPC/PPC64 & PowerMac
 S: 312/107 Canberra Avenue
-S: Griffith, ACT 2603 
+S: Griffith, ACT 2603
 S: Australia
 
 N: Andreas Herrmann
@@ -1825,7 +1831,7 @@ S: Hungary
 N: Bernhard Kaindl
 E: bkaindl@netway.at
 E: edv@bartelt.via.at
-D: Author of a menu based configuration tool, kmenu, which 
+D: Author of a menu based configuration tool, kmenu, which
 D: is the predecessor of 'make menuconfig' and 'make xconfig'.
 D: digiboard driver update(modularisation work and 2.1.x upd)
 S: Tallak 95
@@ -2016,7 +2022,7 @@ W: http://www.xos.nl/
 D: IP transparent proxy support
 S: X/OS Experts in Open Systems BV
 S: Kruislaan 419
-S: 1098 VA Amsterdam 
+S: 1098 VA Amsterdam
 S: The Netherlands
 
 N: Goran Koruga
@@ -2088,7 +2094,7 @@ S: Germany
 
 N: Andrzej M. Krzysztofowicz
 E: ankry@mif.pg.gda.pl
-D: Some 8-bit XT disk driver and devfs hacking 
+D: Some 8-bit XT disk driver and devfs hacking
 D: Aladdin 1533/1543(C) chipset IDE
 D: PIIX chipset IDE
 S: ul. Matemblewska 1B/10
@@ -2463,7 +2469,7 @@ E: mge@EZ-Darmstadt.Telekom.de
 D: Logical Volume Manager
 S: Bartningstr. 12
 S: 64289 Darmstadt
-S: Germany 
+S: Germany
 
 N: Mark W. McClelland
 E: mmcclell@bigfoot.com
@@ -2547,7 +2553,7 @@ E: meskes@debian.org
 P: 1024/04B6E8F5 6C 77 33 CA CC D6 22 03  AB AB 15 A3 AE AD 39 7D
 D: Kernel hacker. PostgreSQL hacker. Software watchdog daemon.
 D: Maintainer of several Debian packages
-S: Th.-Heuss-Str. 61 
+S: Th.-Heuss-Str. 61
 S: D-41812 Erkelenz
 S: Germany
 
@@ -2785,7 +2791,7 @@ E: neuffer@goofy.zdv.uni-mainz.de
 W: http://www.i-Connect.Net/~mike/
 D: Developer and maintainer of the EATA-DMA SCSI driver
 D: Co-developer EATA-PIO SCSI driver
-D: /proc/scsi and assorted other snippets 
+D: /proc/scsi and assorted other snippets
 S: Zum Schiersteiner Grund 2
 S: 55127 Mainz
 S: Germany
@@ -2852,6 +2858,10 @@ D: IPX development and support
 N: Venkatesh Pallipadi (Venki)
 D: x86/HPET
 
+N: Kyungmin Park
+E: kyungmin.park@samsung.com
+D: Samsung S5Pv210 and Exynos4210 mobile platforms
+
 N: David Parsons
 E: orc@pell.chi.il.us
 D: improved memory detection code.
@@ -3019,7 +3029,7 @@ D: Embedded PowerPC 4xx/6xx/7xx/74xx support
 S: Chandler, Arizona 85249
 S: USA
 
-N: Frederic Potter 
+N: Frederic Potter
 E: fpotter@cirpack.com
 D: Some PCI kernel support
 
@@ -3452,21 +3462,21 @@ S: Klosterweg 28 / i309
 S: 76131 Karlsruhe
 S: Germany
 
-N: James Simmons 
+N: James Simmons
 E: jsimmons@infradead.org
-E: jsimmons@users.sf.net 
+E: jsimmons@users.sf.net
 D: Frame buffer device maintainer
 D: input layer development
 D: tty/console layer
-D: various mipsel devices 
+D: various mipsel devices
-S: 115 Carmel Avenue 
+S: 115 Carmel Avenue
 S: El Cerrito CA 94530
-S: USA 
+S: USA
 
 N: Jaspreet Singh
 E: jaspreet@sangoma.com
 W: www.sangoma.com
-D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards 
+D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
 S: Sangoma Technologies Inc.,
 S: 1001 Denison Street
 S: Suite 101
@@ -3490,7 +3500,7 @@ N: Craig Small
 E: csmall@triode.apana.org.au
 E: vk2xlz@gonzo.vk2xlz.ampr.org (packet radio)
 D: Gracilis PackeTwin device driver
-D: RSPF daemon 
+D: RSPF daemon
 S: 10 Stockalls Place
 S: Minto, NSW, 2566
 S: Australia
@@ -3700,7 +3710,7 @@ N: Tsu-Sheng Tsao
 E: tsusheng@scf.usc.edu
 D: IGMP(Internet Group Management Protocol) version 2
 S: 2F 14 ALY 31 LN 166 SEC 1 SHIH-PEI RD
-S: Taipei 
+S: Taipei
 S: Taiwan 112
 S: Republic of China
 S: 24335 Delta Drive
@@ -3861,7 +3871,7 @@ D: Produced the Slackware distribution, updated the SVGAlib
 D: patches for ghostscript, worked on color 'ls', etc.
 S: 301 15th Street S.
 S: Moorhead, Minnesota 56560
-S: USA 
+S: USA
 
 N: Jos Vos
 E: jos@xos.nl
@@ -3869,7 +3879,7 @@ W: http://www.xos.nl/
 D: Various IP firewall updates, ipfwadm
 S: X/OS Experts in Open Systems BV
 S: Kruislaan 419
-S: 1098 VA Amsterdam 
+S: 1098 VA Amsterdam
 S: The Netherlands
 
 N: Jeroen Vreeken
@@ -4107,7 +4117,7 @@ S: People's Repulic of China
 N: Victor Yodaiken
 E: yodaiken@fsmlabs.com
 D: RTLinux (RealTime Linux)
-S: POB 1822 
+S: POB 1822
 S: Socorro NM, 87801
 S: USA
 
@@ -4205,7 +4215,7 @@ D: EISA/sysfs subsystem
 S: France
 
 # Don't add your name here, unless you really _are_ after Marc
-# alphabetically. Leonard used to be very proud of being the 
+# alphabetically. Leonard used to be very proud of being the
 # last entry, and he'll get positively pissed if he can't even
 # be second-to-last.  (and this file really _is_ supposed to be
 # in alphabetic order)

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -109,30 +109,6 @@ Description:
 		When counting down the counter start from preset value
 		and fire event when reach 0.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		channel_A:
-			Encoder A input servers as the count input and B as
-			the UP/DOWN direction control input.
-
-		channel_B:
-			Encoder B input serves as the count input and A as
-			the UP/DOWN direction control input.
-
-		quadrature:
-			Encoder A and B inputs are mixed to get direction
-			and count with a scale of 0.25.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com

Documentation/admin-guide/kernel-parameters.txt

@@ -2858,6 +2858,8 @@
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       kvm.nx_huge_pages=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3186,6 +3188,8 @@
 
 	noefi		Disable EFI runtime services support.
 
+	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+
 	noexec		[IA-64]
 
 	noexec		[X86]
@@ -3235,6 +3239,9 @@
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.

Documentation/dev-tools/kunit/faq.rst

@@ -90,7 +90,7 @@ things to try.
    re-run kunit_tool.
 5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
    may help clean up any residual config items which could be causing problems.
-6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can be
    built into any kernel, or can be built as a module and loaded at runtime.
    Doing so should allow you to determine if UML is causing the issue you're
    seeing. When tests are built-in, they will execute when the kernel boots, and

Documentation/dev-tools/kunit/style.rst

@@ -175,17 +175,17 @@ An example Kconfig entry:
 
 .. code-block:: none
 
-        config FOO_KUNIT_TEST
+	config FOO_KUNIT_TEST
-                tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
+		tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
-                depends on KUNIT
+		depends on KUNIT
-                default KUNIT_ALL_TESTS
+		default KUNIT_ALL_TESTS
-                help
+		help
-                    This builds unit tests for foo.
+		  This builds unit tests for foo.
 
-                    For more information on KUnit and unit tests in general, please refer
+		  For more information on KUnit and unit tests in general, please refer
-                    to the KUnit documentation in Documentation/dev-tools/kunit
+		  to the KUnit documentation in Documentation/dev-tools/kunit/.
 
-                    If unsure, say N
+		  If unsure, say N.
 
 
 Test File and Module Names

Documentation/dev-tools/kunit/usage.rst

@@ -92,7 +92,7 @@ behavior of a function called ``add``; the first parameter is always of type
 the second parameter, in this case, is what the value is expected to be; the
 last value is what the value actually is. If ``add`` passes all of these
 expectations, the test case, ``add_test_basic`` will pass; if any one of these
-expectations fail, the test case will fail.
+expectations fails, the test case will fail.
 
 It is important to understand that a test case *fails* when any expectation is
 violated; however, the test will continue running, potentially trying other
@@ -202,7 +202,7 @@ Example:
 	kunit_test_suite(example_test_suite);
 
 In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``,
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
 each would have ``example_test_init`` called immediately before it and would
 have ``example_test_exit`` called immediately after it.
 ``kunit_test_suite(example_test_suite)`` registers the test suite with the
@@ -229,7 +229,7 @@ through some sort of indirection where a function is exposed as part of an API
 such that the definition of that function can be changed without affecting the
 rest of the code base. In the kernel this primarily comes from two constructs,
 classes, structs that contain function pointers that are provided by the
-implementer, and architecture specific functions which have definitions selected
+implementer, and architecture-specific functions which have definitions selected
 at compile time.
 
 Classes
@@ -459,7 +459,7 @@ KUnit on non-UML architectures
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code or test
+are instances where being able to run architecture-specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -599,7 +599,7 @@ writing normal KUnit tests. One special caveat is that you have to reset
 hardware state in between test cases; if this is not possible, you may only be
 able to run one test case per invocation.
 
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
    dependent KUnit test.
 
 KUnit debugfs representation

Documentation/devicetree/bindings/clock/imx5-clock.yaml

@@ -57,7 +57,7 @@ examples:
     };
 
     can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
         reg = <0x53fc8000 0x4000>;
         interrupts = <82>;
         clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;

Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

@@ -20,14 +20,17 @@ properties:
           - fsl,imx8qm-flexcan
           - fsl,imx8mp-flexcan
           - fsl,imx6q-flexcan
-          - fsl,imx53-flexcan
-          - fsl,imx35-flexcan
           - fsl,imx28-flexcan
           - fsl,imx25-flexcan
           - fsl,p1010-flexcan
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx53-flexcan
+              - fsl,imx35-flexcan
+          - const: fsl,imx25-flexcan
       - items:
           - enum:
               - fsl,imx7d-flexcan
@@ -81,11 +84,12 @@ properties:
       req_bit is the bit offset of CAN stop request.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: The 'gpr' is the phandle to general purpose register node.
+      items:
-      - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+        - description: The 'gpr' is the phandle to general purpose register node.
-        maximum: 0xff
+        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
-      - description: The 'req_bit' is the bit offset of CAN stop request.
+          maximum: 0xff
-        maximum: 0x1f
+        - description: The 'req_bit' is the bit offset of CAN stop request.
+          maximum: 0x1f
 
   fsl,clk-source:
     description: |

Documentation/devicetree/bindings/sound/rt1015.txt

@@ -8,10 +8,16 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+Optional properties:
+
+- realtek,power-up-delay-ms
+  Set a delay time for flush work to be completed,
+  this value is adjustable depending on platform.
 
 Example:
 
 rt1015: codec@28 {
 	compatible = "realtek,rt1015";
 	reg = <0x28>;
+	realtek,power-up-delay-ms = <50>;
 };

Documentation/filesystems/ext4/journal.rst

@@ -256,6 +256,10 @@ which is 1024 bytes long:
      - s\_padding2
      -
    * - 0x54
+     - \_\_be32
+     - s\_num\_fc\_blocks
+     - Number of fast commit blocks in the journal.
+   * - 0x58
      - \_\_u32
      - s\_padding[42]
      -
@@ -310,6 +314,8 @@ The journal incompat features are any combination of the following:
      - This journal uses v3 of the checksum on-disk format. This is the same as
        v2, but the journal block tag size is fixed regardless of the size of
        block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
+   * - 0x20
+     - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT)
 
 .. _jbd2_checksum_type:
 

Documentation/filesystems/ext4/super.rst

@@ -596,6 +596,13 @@ following:
      - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
        points to the two block groups that contain backup superblocks
        (COMPAT\_SPARSE\_SUPER2).
+   * - 0x400
+     - Fast commits supported. Although fast commits blocks are
+       backward incompatible, fast commit blocks are not always
+       present in the journal. If fast commit blocks are present in
+       the journal, JBD2 incompat feature
+       (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets
+       set (COMPAT\_FAST\_COMMIT).
 
 .. _super_incompat:
 

Documentation/filesystems/journalling.rst

@@ -136,10 +136,8 @@ Fast commits
 ~~~~~~~~~~~~
 
 JBD2 to also allows you to perform file-system specific delta commits known as
-fast commits. In order to use fast commits, you first need to call
+fast commits. In order to use fast commits, you will need to set following
-:c:func:`jbd2_fc_init` and tell how many blocks at the end of journal
+callbacks that perform correspodning work:
-area should be reserved for fast commits. Along with that, you will also need
-to set following callbacks that perform correspodning work:
 
 `journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and
 fast commit.

Documentation/firmware-guide/acpi/acpi-lid.rst

@@ -19,9 +19,9 @@ report the "current" state of the lid as either "opened" or "closed".
 
 For most platforms, both the _LID method and the lid notifications are
 reliable. However, there are exceptions. In order to work with these
-exceptional buggy platforms, special restrictions and expections should be
+exceptional buggy platforms, special restrictions and exceptions should be
 taken into account. This document describes the restrictions and the
-expections of the Linux ACPI lid device driver.
+exceptions of the Linux ACPI lid device driver.
 
 
 Restrictions of the returning value of the _LID control method
@@ -46,7 +46,7 @@ state is changed to "closed". The "closed" notification is normally used to
 trigger some system power saving operations on Windows. Since it is fully
 tested, it is reliable from all AML tables.
 
-Expections for the userspace users of the ACPI lid device driver
+Exceptions for the userspace users of the ACPI lid device driver
 ================================================================
 
 The ACPI button driver exports the lid state to the userspace via the
@@ -100,7 +100,7 @@ use the following kernel parameter:
 C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
-   ensure that the reliable "closed" notifications can always be delievered
+   ensure that the reliable "closed" notifications can always be delivered
    to the userspace by always pairing "closed" input events with complement
    "opened" input events. But there is still no guarantee that the "opened"
    notifications can be delivered to the userspace when the lid is actually

Documentation/firmware-guide/acpi/gpio-properties.rst

@@ -20,9 +20,9 @@ index, like the ASL example below shows::
 
       Name (_CRS, ResourceTemplate ()
       {
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {15}
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
       })
 
@@ -49,15 +49,41 @@ index
 pin
   Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
 active_low
-  If 1 the GPIO is marked as active_low.
+  If 1, the GPIO is marked as active_low.
 
 Since ACPI GpioIo() resource does not have a field saying whether it is
 active low or high, the "active_low" argument can be used here.  Setting
 it to 1 marks the GPIO as active low.
 
+Note, active_low in _DSD does not make sense for GpioInt() resource and
+must be 0. GpioInt() resource has its own means of defining it.
+
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+The GpioIo() resource unfortunately doesn't explicitly provide an initial
+state of the output pin which driver should use during its initialization.
+
+Linux tries to use common sense here and derives the state from the bias
+and polarity settings. The table below shows the expectations:
+
+=========  =============  ==============
+Pull Bias     Polarity     Requested...
+=========  =============  ==============
+Implicit     x            AS IS (assumed firmware configured for us)
+Explicit     x (no _DSD)  as Pull Bias (Up == High, Down == Low),
+                          assuming non-active (Polarity = !Pull Bias)
+Down         Low          as low, assuming active
+Down         High         as low, assuming non-active
+Up           Low          as high, assuming non-active
+Up           High         as high, assuming active
+=========  =============  ==============
+
+That said, for our above example the both GPIOs, since the bias setting
+is explicit and _DSD is present, will be treated as active with a high
+polarity and Linux will configure the pins in this state until a driver
+reprograms them differently.
+
 It is possible to leave holes in the array of GPIOs. This is useful in
 cases like with SPI host controllers where some chip selects may be
 implemented as GPIOs and some as native signals. For example a SPI host
@@ -112,8 +138,8 @@ Example::
   Package () {
       "gpio-line-names",
       Package () {
-          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD",
-          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+          "MUX7_IO", "LVL_C_A1", "MUX0_IO", "SPI1_MISO",
       }
   }
 
@@ -137,7 +163,7 @@ to the GPIO lines it is going to use and provide the GPIO subsystem with a
 mapping between those names and the ACPI GPIO resources corresponding to them.
 
 To do that, the driver needs to define a mapping table as a NULL-terminated
-array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+array of struct acpi_gpio_mapping objects that each contains a name, a pointer
 to an array of line data (struct acpi_gpio_params) objects and the size of that
 array.  Each struct acpi_gpio_params object consists of three fields,
 crs_entry_index, line_index, active_low, representing the index of the target
@@ -154,13 +180,14 @@ question would look like this::
   static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
     { "reset-gpios", &reset_gpio, 1 },
     { "shutdown-gpios", &shutdown_gpio, 1 },
-    { },
+    { }
   };
 
 Next, the mapping table needs to be passed as the second argument to
-acpi_dev_add_driver_gpios() that will register it with the ACPI device object
+acpi_dev_add_driver_gpios() or its managed analogue that will
-pointed to by its first argument.  That should be done in the driver's .probe()
+register it with the ACPI device object pointed to by its first
-routine.  On removal, the driver should unregister its GPIO mapping table by
+argument. That should be done in the driver's .probe() routine.
+On removal, the driver should unregister its GPIO mapping table by
 calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
 table was previously registered.
 
@@ -191,12 +218,12 @@ The driver might expect to get the right GPIO when it does::
 but since there is no way to know the mapping between "reset" and
 the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT).
 
-The driver author can solve this by passing the mapping explictly
+The driver author can solve this by passing the mapping explicitly
-(the recommended way and documented in the above chapter).
+(this is the recommended way and it's documented in the above chapter).
 
 The ACPI GPIO mapping tables should not contaminate drivers that are not
 knowing about which exact device they are servicing on. It implies that
-the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain
+the ACPI GPIO mapping tables are hardly linked to an ACPI ID and certain
 objects, as listed in the above chapter, of the device in question.
 
 Getting GPIO descriptor
@@ -229,5 +256,5 @@ Case 2 explicitly tells GPIO core to look for resources in _CRS.
 Be aware that gpiod_get_index() in cases 1 and 2, assuming that there
 are two versions of ACPI device description provided and no mapping is
 present in the driver, will return different resources. That's why a
-certain driver has to handle them carefully as explained in previous
+certain driver has to handle them carefully as explained in the previous
 chapter.

Documentation/firmware-guide/acpi/method-tracing.rst

@@ -98,7 +98,7 @@ subject to change::
    [    0.188903]   exdebug-0398 ex_trace_point        : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
 
 Developers can utilize these special log entries to track the AML
-interpretion, thus can aid issue debugging and performance tuning. Note
+interpretation, thus can aid issue debugging and performance tuning. Note
 that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
 macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
 "AML tracer" logs.

Documentation/networking/netdev-FAQ.rst

@@ -110,7 +110,7 @@ Q: I sent a patch and I'm wondering what happened to it?
 Q: How can I tell whether it got merged?
 A: Start by looking at the main patchworks queue for netdev:
 
-  http://patchwork.ozlabs.org/project/netdev/list/
+  https://patchwork.kernel.org/project/netdevbpf/list/
 
 The "State" field will tell you exactly where things are at with your
 patch.
@@ -152,7 +152,7 @@ networking subsystem, and then hands them off to Greg.
 
 There is a patchworks queue that you can see here:
 
-  http://patchwork.ozlabs.org/bundle/davem/stable/?state=*
+  https://patchwork.kernel.org/bundle/netdev/stable/?state=*
 
 It contains the patches which Dave has selected, but not yet handed off
 to Greg.  If Greg already has the patch, then it will be here:

Documentation/networking/phy.rst

@@ -247,8 +247,8 @@ Some of the interface modes are described below:
     speeds (see below.)
 
 ``PHY_INTERFACE_MODE_2500BASEX``
-    This defines a variant of 1000BASE-X which is clocked 2.5 times faster,
+    This defines a variant of 1000BASE-X which is clocked 2.5 times as fast
-    than the 802.3 standard giving a fixed bit rate of 3.125Gbaud.
+    as the 802.3 standard, giving a fixed bit rate of 3.125Gbaud.
 
 ``PHY_INTERFACE_MODE_SGMII``
     This is used for Cisco SGMII, which is a modification of 1000BASE-X

Documentation/process/stable-kernel-rules.rst

@@ -39,7 +39,7 @@ Procedure for submitting patches to the -stable tree
    submission guidelines as described in
    :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
    after first checking the stable networking queue at
-   https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
    to ensure the requested patch is not already queued up.
  - Security patches should not be handled (solely) by the -stable review
    process but should follow the procedures in

Documentation/translations/it_IT/process/stable-kernel-rules.rst

@@ -46,7 +46,7 @@ Procedura per sottomettere patch per i sorgenti -stable
    :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst <it_netdev-FAQ>`;
    ma solo dopo aver verificato al seguente indirizzo che la patch non sia
    già in coda:
-   https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
  - Una patch di sicurezza non dovrebbero essere gestite (solamente) dal processo
    di revisione -stable, ma dovrebbe seguire le procedure descritte in
    :ref:`Documentation/translations/it_IT/admin-guide/security-bugs.rst <it_securitybugs>`.

Documentation/virt/kvm/api.rst

@@ -6367,7 +6367,7 @@ accesses that would usually trigger a #GP by KVM into the guest will
 instead get bounced to user space through the KVM_EXIT_X86_RDMSR and
 KVM_EXIT_X86_WRMSR exit notifications.
 
-8.25 KVM_X86_SET_MSR_FILTER
+8.27 KVM_X86_SET_MSR_FILTER
 ---------------------------
 
 :Architectures: x86
@@ -6381,8 +6381,7 @@ In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to
 trap and emulate MSRs that are outside of the scope of KVM as well as
 limit the attack surface on KVM's MSR emulation code.
 
-
+8.28 KVM_CAP_ENFORCE_PV_CPUID
-8.26 KVM_CAP_ENFORCE_PV_CPUID
 -----------------------------
 
 Architectures: x86

Documentation/xtensa/mmu.rst

@@ -82,7 +82,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xc8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -124,7 +125,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xa8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -167,7 +169,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0x98000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE

MAINTAINERS

@@ -1279,7 +1279,7 @@ M:	Igor Russkikh <irusskikh@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	https://www.marvell.com/
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
 F:	drivers/net/ethernet/aquantia/atlantic/
 
@@ -1546,6 +1546,7 @@ F:	drivers/clk/sunxi/
 ARM/Allwinner sunXi SoC support
 M:	Maxime Ripard <mripard@kernel.org>
 M:	Chen-Yu Tsai <wens@csie.org>
+R:	Jernej Skrabec <jernej.skrabec@siol.net>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
@@ -2374,7 +2375,7 @@ F:	drivers/i2c/busses/i2c-rk3x.c
 F:	sound/soc/rockchip/
 N:	rockchip
 
-ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
+ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org
@@ -2403,15 +2404,7 @@ N:	s3c2410
 N:	s3c64xx
 N:	s5pv210
 
-ARM/SAMSUNG MOBILE MACHINE SUPPORT
-M:	Kyungmin Park <kyungmin.park@samsung.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-s5pv210/
-
 ARM/SAMSUNG S5P SERIES 2D GRAPHICS ACCELERATION (G2D) SUPPORT
-M:	Kyungmin Park <kyungmin.park@samsung.com>
-M:	Kamil Debski <kamil@wypas.org>
 M:	Andrzej Hajda <a.hajda@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
@@ -2436,9 +2429,6 @@ S:	Maintained
 F:	drivers/media/platform/s5p-jpeg/
 
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
-M:	Kyungmin Park <kyungmin.park@samsung.com>
-M:	Kamil Debski <kamil@wypas.org>
-M:	Jeongtae Park <jtp.park@samsung.com>
 M:	Andrzej Hajda <a.hajda@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
@@ -3243,10 +3233,10 @@ F:	drivers/iio/accel/bma400*
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
 M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	Andrii Nakryiko <andrii@kernel.org>
 R:	Martin KaFai Lau <kafai@fb.com>
 R:	Song Liu <songliubraving@fb.com>
 R:	Yonghong Song <yhs@fb.com>
-R:	Andrii Nakryiko <andrii@kernel.org>
 R:	John Fastabend <john.fastabend@gmail.com>
 R:	KP Singh <kpsingh@chromium.org>
 L:	netdev@vger.kernel.org
@@ -4710,7 +4700,7 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 F:	drivers/media/dvb-frontends/cxd2820r*
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-M:	Vishal Kulkarni <vishal@chelsio.com>
+M:	Raju Rangoju <rajur@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com
@@ -4742,7 +4732,7 @@ W:	http://www.chelsio.com
 F:	drivers/net/ethernet/chelsio/inline_crypto/
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Vishal Kulkarni <vishal@chelsio.com>
+M:	Raju Rangoju <rajur@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com
@@ -4764,7 +4754,7 @@ F:	drivers/infiniband/hw/cxgb4/
 F:	include/uapi/rdma/cxgb4-abi.h
 
 CXGB4VF ETHERNET DRIVER (CXGB4VF)
-M:	Vishal Kulkarni <vishal@gmail.com>
+M:	Raju Rangoju <rajur@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com
@@ -6614,6 +6604,7 @@ Q:	http://patchwork.ozlabs.org/project/linux-ext4/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git
 F:	Documentation/filesystems/ext4/
 F:	fs/ext4/
+F:	include/trace/events/ext4.h
 
 Extended Verification Module (EVM)
 M:	Mimi Zohar <zohar@linux.ibm.com>
@@ -8829,8 +8820,8 @@ S:	Supported
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
 Q:	http://patchwork.ozlabs.org/project/intel-wired-lan/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue.git
 F:	Documentation/networking/device_drivers/ethernet/intel/
 F:	drivers/net/ethernet/intel/
 F:	drivers/net/ethernet/intel/*/
@@ -9171,6 +9162,7 @@ F:	include/linux/iomap.h
 
 IOMMU DRIVERS
 M:	Joerg Roedel <joro@8bytes.org>
+M:	Will Deacon <will@kernel.org>
 L:	iommu@lists.linux-foundation.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@@ -9842,13 +9834,6 @@ S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
 
-LAPB module
-L:	linux-x25@vger.kernel.org
-S:	Orphan
-F:	Documentation/networking/lapb-module.rst
-F:	include/*/lapb.h
-F:	net/lapb/
-
 LASI 53c700 driver for PARISC
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
@@ -11173,7 +11158,7 @@ M:	Tariq Toukan <tariqt@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlx4/en_*
 
 MELLANOX ETHERNET DRIVER (mlx5e)
@@ -11181,7 +11166,7 @@ M:	Saeed Mahameed <saeedm@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlx5/core/en_*
 
 MELLANOX ETHERNET INNOVA DRIVERS
@@ -11189,7 +11174,7 @@ R:	Boris Pismenny <borisp@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlx5/core/accel/*
 F:	drivers/net/ethernet/mellanox/mlx5/core/en_accel/*
 F:	drivers/net/ethernet/mellanox/mlx5/core/fpga/*
@@ -11201,7 +11186,7 @@ M:	Ido Schimmel <idosch@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 F:	tools/testing/selftests/drivers/net/mlxsw/
 
@@ -11210,7 +11195,7 @@ M:	mlxsw@nvidia.com
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlxfw/
 
 MELLANOX HARDWARE PLATFORM SUPPORT
@@ -11229,7 +11214,7 @@ L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlx4/
 F:	include/linux/mlx4/
 
@@ -11250,7 +11235,7 @@ L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	Documentation/networking/device_drivers/ethernet/mellanox/
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
@@ -12130,7 +12115,7 @@ M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	Documentation/devicetree/bindings/net/
@@ -12175,7 +12160,7 @@ M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
-Q:	http://patchwork.ozlabs.org/project/netdev/list/
+Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 B:	mailto:netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
@@ -14210,7 +14195,6 @@ F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
 PWM FAN DRIVER
-M:	Kamil Debski <kamil@wypas.org>
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-hwmon@vger.kernel.org
 S:	Supported
@@ -15246,7 +15230,6 @@ F:	drivers/iommu/s390-iommu.c
 S390 IUCV NETWORK LAYER
 M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Karsten Graul <kgraul@linux.ibm.com>
-M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -15257,7 +15240,6 @@ F:	net/iucv/
 S390 NETWORK DRIVERS
 M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Karsten Graul <kgraul@linux.ibm.com>
-M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -15426,14 +15408,12 @@ F:	Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
 F:	drivers/nfc/s3fwrn5
 
 SAMSUNG S5C73M3 CAMERA DRIVER
-M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Andrzej Hajda <a.hajda@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/i2c/s5c73m3/*
 
 SAMSUNG S5K5BAF CAMERA DRIVER
-M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Andrzej Hajda <a.hajda@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
@@ -15451,7 +15431,6 @@ F:	Documentation/devicetree/bindings/crypto/samsung-sss.yaml
 F:	drivers/crypto/s5p-sss.c
 
 SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
-M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
@@ -15499,7 +15478,6 @@ T:	git https://github.com/lmajewski/linux-samsung-thermal.git
 F:	drivers/thermal/samsung/
 
 SAMSUNG USB2 PHY DRIVER
-M:	Kamil Debski <kamil@wypas.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
@@ -15828,7 +15806,6 @@ S:	Maintained
 F:	drivers/misc/sgi-xp/
 
 SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
-M:	Ursula Braun <ubraun@linux.ibm.com>
 M:	Karsten Graul <kgraul@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
@@ -18175,6 +18152,14 @@ L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/usb/class/usblp.c
 
+USB RAW GADGET DRIVER
+R:	Andrey Konovalov <andreyknvl@gmail.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/usb/raw-gadget.rst
+F:	drivers/usb/gadget/legacy/raw_gadget.c
+F:	include/uapi/linux/usb/raw_gadget.h
+
 USB QMI WWAN NETWORK DRIVER
 M:	Bjørn Mork <bjorn@mork.no>
 L:	netdev@vger.kernel.org
@@ -19000,12 +18985,18 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 N:	axp[128]
 
-X.25 NETWORK LAYER
+X.25 STACK
-M:	Andrew Hendry <andrew.hendry@gmail.com>
+M:	Martin Schiller <ms@dev.tdt.de>
 L:	linux-x25@vger.kernel.org
-S:	Odd Fixes
+S:	Maintained
+F:	Documentation/networking/lapb-module.rst
 F:	Documentation/networking/x25*
+F:	drivers/net/wan/hdlc_x25.c
+F:	drivers/net/wan/lapbether.c
+F:	include/*/lapb.h
 F:	include/net/x25*
+F:	include/uapi/linux/x25.h
+F:	net/lapb/
 F:	net/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/head.S

@@ -1472,6 +1472,9 @@ ENTRY(efi_enter_kernel)
 		@ issued from HYP mode take us to the correct handler code. We
 		@ will disable the MMU before jumping to the kernel proper.
 		@
+ ARM(		bic	r1, r1, #(1 << 30)	) @ clear HSCTLR.TE
+ THUMB(		orr	r1, r1, #(1 << 30)	) @ set HSCTLR.TE
+		mcr	p15, 4, r1, c1, c0, 0
 		adr	r0, __hyp_reentry_vectors
 		mcr	p15, 4, r0, c12, c0, 0	@ set HYP vector base (HVBAR)
 		isb

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -122,7 +122,6 @@
 };
 
 &clock {
-	clocks = <&clock CLK_XUSBXTI>;
 	assigned-clocks = <&clock CLK_FOUT_EPLL>;
 	assigned-clock-rates = <45158401>;
 };

arch/arm/boot/dts/imx50-evk.dts

@@ -59,7 +59,7 @@
 				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
 				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
 				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
 			>;
 		};
 

arch/arm/boot/dts/imx6q-prti6q.dts

@@ -213,8 +213,8 @@
 		#size-cells = <0>;
 
 		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@4 {
+		rgmii_phy: ethernet-phy@0 {
-			reg = <4>;
+			reg = <0>;
 			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;

arch/arm/boot/dts/imx6qdl-udoo.dtsi

@@ -98,7 +98,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

@@ -46,6 +46,16 @@
 			linux,code = <KEY_A>;
 			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
 		};
+
+		/*
+		 * The EXTi IRQ line 0 is shared with PMIC,
+		 * so mark this as polled GPIO key.
+		 */
+		button-2 {
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	gpio-keys {
@@ -59,13 +69,6 @@
 			wakeup-source;
 		};
 
-		button-2 {
-			label = "TA3-GPIO-C";
-			linux,code = <KEY_C>;
-			gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
 		button-3 {
 			label = "TA4-GPIO-D";
 			linux,code = <KEY_D>;
@@ -79,7 +82,7 @@
 
 		led-0 {
 			label = "green:led5";
-			gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

@@ -68,6 +68,7 @@
 		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&vdd>;
 	};
 };
 
@@ -202,6 +203,7 @@
 
 			vdda: ldo1 {
 				regulator-name = "vdda";
+				regulator-always-on;
 				regulator-min-microvolt = <2900000>;
 				regulator-max-microvolt = <2900000>;
 				interrupts = <IT_CURLIM_LDO1 0>;

arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi

@@ -21,6 +21,10 @@
 	};
 };
 
+&dts {
+	status = "okay";
+};
+
 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins_a>;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -154,7 +154,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts

@@ -130,7 +130,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -151,7 +151,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts

@@ -131,7 +131,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_sw>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	allwinner,rx-delay-ps = <700>;
 	allwinner,tx-delay-ps = <700>;
 	status = "okay";

arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts

@@ -183,7 +183,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_dldo4>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts

@@ -53,11 +53,6 @@
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts

@@ -67,7 +67,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts

@@ -129,7 +129,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };

arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

@@ -129,7 +129,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -124,7 +124,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };

arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi

@@ -126,7 +126,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -406,6 +406,9 @@
 	};
 };
 
+&mdio1 {
+	clock-frequency = <5000000>;
+};
 
 &iomuxc {
 	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {

arch/arm/include/asm/kprobes.h

@@ -44,20 +44,20 @@ int kprobe_exceptions_notify(struct notifier_block *self,
 			     unsigned long val, void *data);
 
 /* optinsn template addresses */
-extern __visible kprobe_opcode_t optprobe_template_entry;
+extern __visible kprobe_opcode_t optprobe_template_entry[];
-extern __visible kprobe_opcode_t optprobe_template_val;
+extern __visible kprobe_opcode_t optprobe_template_val[];
-extern __visible kprobe_opcode_t optprobe_template_call;
+extern __visible kprobe_opcode_t optprobe_template_call[];
-extern __visible kprobe_opcode_t optprobe_template_end;
+extern __visible kprobe_opcode_t optprobe_template_end[];
-extern __visible kprobe_opcode_t optprobe_template_sub_sp;
+extern __visible kprobe_opcode_t optprobe_template_sub_sp[];
-extern __visible kprobe_opcode_t optprobe_template_add_sp;
+extern __visible kprobe_opcode_t optprobe_template_add_sp[];
-extern __visible kprobe_opcode_t optprobe_template_restore_begin;
+extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
-extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn;
+extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
-extern __visible kprobe_opcode_t optprobe_template_restore_end;
+extern __visible kprobe_opcode_t optprobe_template_restore_end[];
 
 #define MAX_OPTIMIZED_LENGTH	4
 #define MAX_OPTINSN_SIZE				\
-	((unsigned long)&optprobe_template_end -	\
+	((unsigned long)optprobe_template_end -	\
-	 (unsigned long)&optprobe_template_entry)
+	 (unsigned long)optprobe_template_entry)
 #define RELATIVEJUMP_SIZE	4
 
 struct arch_optimized_insn {

arch/arm/kernel/perf_regs.c

@@ -32,8 +32,7 @@ u64 perf_reg_abi(struct task_struct *task)
 }
 
 void perf_get_regs_user(struct perf_regs *regs_user,
-			struct pt_regs *regs,
+			struct pt_regs *regs)
-			struct pt_regs *regs_user_copy)
 {
 	regs_user->regs = task_pt_regs(current);
 	regs_user->abi = perf_reg_abi(current);

arch/arm/probes/kprobes/opt-arm.c

@@ -85,21 +85,21 @@ asm (
 			"optprobe_template_end:\n");
 
 #define TMPL_VAL_IDX \
-	((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry)
 #define TMPL_CALL_IDX \
-	((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry)
 #define TMPL_END_IDX \
-	((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry)
 #define TMPL_ADD_SP \
-	((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_SUB_SP \
-	((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_BEGIN \
-	((unsigned long *)&optprobe_template_restore_begin - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_ORIGN_INSN \
-	((unsigned long *)&optprobe_template_restore_orig_insn - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_END \
-	((unsigned long *)&optprobe_template_restore_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry)
 
 /*
  * ARM can always optimize an instruction when using ARM ISA, except
@@ -234,7 +234,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *or
 	}
 
 	/* Copy arch-dep-instance from template. */
-	memcpy(code, (unsigned long *)&optprobe_template_entry,
+	memcpy(code, (unsigned long *)optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
 
 	/* Adjust buffer according to instruction. */

arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

@@ -105,7 +105,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

@@ -120,7 +120,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts

@@ -13,7 +13,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	phy-handle = <&ext_rgmii_phy>;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

@@ -122,9 +122,6 @@
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		csi_ep: endpoint {
 			remote-endpoint = <&ov5640_ep>;
 			bus-width = <8>;

arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts

@@ -36,7 +36,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	/delete-property/ allwinner,leds-active-low;
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts

@@ -123,7 +123,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

@@ -124,7 +124,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -97,7 +97,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_aldo2>;
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -100,7 +100,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_gmac_3v3>;
 	allwinner,rx-delay-ps = <200>;

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -159,7 +159,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00a";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts

@@ -192,7 +192,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00a";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts

@@ -75,6 +75,7 @@
 &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-connection-type = "sgmii";
+	managed = "in-band-status";
 	status = "okay";
 
 	mdio {

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -1012,6 +1012,7 @@
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi

@@ -805,6 +805,7 @@
 			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -892,6 +892,7 @@
 			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {

arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi

@@ -72,6 +72,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -210,6 +211,7 @@
 		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 		clocks = <&osc_32k>;
+		max-speed = <4000000>;
 		clock-names = "extclk";
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

@@ -121,6 +121,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi

@@ -135,13 +135,10 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
-		/*
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		 * The interrupt is not correct. It should be level low,
-		 * however with internal pull up this causes IRQ storm.
-		 */
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
@@ -398,7 +395,7 @@
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x41
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -129,7 +129,7 @@
 
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <900000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;

arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts

@@ -53,6 +53,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

arch/arm64/boot/dts/freescale/imx8mn-evk.dts

@@ -18,6 +18,7 @@
 	pmic: pmic@25 {
 		compatible = "nxp,pca9450b";
 		reg = <0x25>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi

@@ -116,13 +116,10 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
-		/*
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		 * The interrupt is not correct. It should be level low,
-		 * however with internal pull up this causes IRQ storm.
-		 */
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
 		rohm,reset-snvs-powered;
 
 		regulators {
@@ -388,7 +385,7 @@
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x101
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -790,28 +790,6 @@
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
-
-			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
-				reg = <0x32e50000 0x200>;
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				status = "disabled";
-			};
-
-			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
-				#index-cells = <1>;
-				reg = <0x32e50200 0x200>;
-			};
-
 		};
 
 		dma_apbh: dma-controller@33000000 {
@@ -876,12 +854,4 @@
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
 	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
-		clock-names = "main_clk";
-	};
 };

arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi

@@ -19,6 +19,7 @@ fman0: fman@1a00000 {
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x800 0x10>;
 	ptimer-handle = <&ptp_timer0>;
+	dma-coherent;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";

arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts

@@ -110,7 +110,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mt25qu02g";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

arch/arm64/boot/dts/renesas/r8a774e1.dtsi

@@ -28,6 +28,12 @@
 		clock-frequency = <0>;
 	};
 
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	audio_clk_c: audio_clk_c {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;

arch/arm64/include/asm/cpufeature.h

@@ -268,6 +268,8 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
 /*
  * CPU feature detected at boot time based on feature of one or more CPUs.
  * All possible conflicts for a late CPU are ignored.
+ * NOTE: this means that a late CPU with the feature will *not* cause the
+ * capability to be advertised by cpus_have_*cap()!
  */
 #define ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE		\
 	(ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\

arch/arm64/include/asm/cputype.h

@@ -86,6 +86,8 @@
 #define QCOM_CPU_PART_FALKOR_V1		0x800
 #define QCOM_CPU_PART_FALKOR		0xC00
 #define QCOM_CPU_PART_KRYO		0x200
+#define QCOM_CPU_PART_KRYO_2XX_GOLD	0x800
+#define QCOM_CPU_PART_KRYO_2XX_SILVER	0x801
 #define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
 #define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
 #define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
@@ -116,6 +118,8 @@
 #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
 #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
+#define MIDR_QCOM_KRYO_2XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_GOLD)
+#define MIDR_QCOM_KRYO_2XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_SILVER)
 #define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
 #define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
 #define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)

arch/arm64/include/asm/kvm_host.h

@@ -118,6 +118,8 @@ struct kvm_arch {
 	 */
 	unsigned long *pmu_filter;
 	unsigned int pmuver;
+
+	u8 pfr0_csv2;
 };
 
 struct kvm_vcpu_fault_info {

arch/arm64/include/asm/sysreg.h

@@ -372,6 +372,8 @@
 #define SYS_CONTEXTIDR_EL1		sys_reg(3, 0, 13, 0, 1)
 #define SYS_TPIDR_EL1			sys_reg(3, 0, 13, 0, 4)
 
+#define SYS_SCXTNUM_EL1			sys_reg(3, 0, 13, 0, 7)
+
 #define SYS_CNTKCTL_EL1			sys_reg(3, 0, 14, 1, 0)
 
 #define SYS_CCSIDR_EL1			sys_reg(3, 1, 0, 0, 0)
@@ -404,6 +406,8 @@
 #define SYS_TPIDR_EL0			sys_reg(3, 3, 13, 0, 2)
 #define SYS_TPIDRRO_EL0			sys_reg(3, 3, 13, 0, 3)
 
+#define SYS_SCXTNUM_EL0			sys_reg(3, 3, 13, 0, 7)
+
 /* Definitions for system register interface to AMU for ARMv8.4 onwards */
 #define SYS_AM_EL0(crm, op2)		sys_reg(3, 3, 13, (crm), (op2))
 #define SYS_AMCR_EL0			SYS_AM_EL0(2, 0)

arch/arm64/kernel/cpu_errata.c

@@ -299,6 +299,8 @@ static const struct midr_range erratum_845719_list[] = {
 	MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
 	/* Brahma-B53 r0p[0] */
 	MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+	/* Kryo2XX Silver rAp4 */
+	MIDR_REV(MIDR_QCOM_KRYO_2XX_SILVER, 0xa, 0x4),
 	{},
 };
 #endif

arch/arm64/kernel/cpufeature.c

@@ -1337,6 +1337,8 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
 		MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
 		MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_GOLD),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
 		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
 		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
 		{ /* sentinel */ }

arch/arm64/kernel/kexec_image.c

@@ -127,7 +127,7 @@ static void *image_load(struct kimage *image,
 				kernel_segment->mem, kbuf.bufsz,
 				kernel_segment->memsz);
 
-	return 0;
+	return NULL;
 }
 
 #ifdef CONFIG_KEXEC_IMAGE_VERIFY_SIG

arch/arm64/kernel/perf_regs.c

@@ -73,8 +73,7 @@ u64 perf_reg_abi(struct task_struct *task)
 }
 
 void perf_get_regs_user(struct perf_regs *regs_user,
-			struct pt_regs *regs,
+			struct pt_regs *regs)
-			struct pt_regs *regs_user_copy)
 {
 	regs_user->regs = task_pt_regs(current);
 	regs_user->abi = perf_reg_abi(current);

arch/arm64/kernel/process.c

@@ -522,14 +522,13 @@ static void erratum_1418040_thread_switch(struct task_struct *prev,
 	bool prev32, next32;
 	u64 val;
 
-	if (!(IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) &&
+	if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040))
-	      cpus_have_const_cap(ARM64_WORKAROUND_1418040)))
 		return;
 
 	prev32 = is_compat_thread(task_thread_info(prev));
 	next32 = is_compat_thread(task_thread_info(next));
 
-	if (prev32 == next32)
+	if (prev32 == next32 || !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
 		return;
 
 	val = read_sysreg(cntkctl_el1);

arch/arm64/kernel/proton-pack.c

@@ -118,6 +118,7 @@ static enum mitigation_state spectre_v2_get_cpu_hw_mitigation_state(void)
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 		MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
 		MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
 		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
 		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
 		{ /* sentinel */ }

arch/arm64/kernel/psci.c

@@ -66,7 +66,6 @@ static int cpu_psci_cpu_disable(unsigned int cpu)
 
 static void cpu_psci_cpu_die(unsigned int cpu)
 {
-	int ret;
 	/*
 	 * There are no known implementations of PSCI actually using the
 	 * power state field, pass a sensible default for now.
@@ -74,9 +73,7 @@ static void cpu_psci_cpu_die(unsigned int cpu)
 	u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
 		    PSCI_0_2_POWER_STATE_TYPE_SHIFT;
 
-	ret = psci_ops.cpu_off(state);
+	psci_ops.cpu_off(state);
-
-	pr_crit("unable to power off CPU%u (%d)\n", cpu, ret);
 }
 
 static int cpu_psci_cpu_kill(unsigned int cpu)

arch/arm64/kernel/smp.c

@@ -413,6 +413,7 @@ void cpu_die_early(void)
 
 	/* Mark this CPU absent */
 	set_cpu_present(cpu, 0);
+	rcu_report_dead(cpu);
 
 	if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
 		update_cpu_boot_status(CPU_KILL_ME);

arch/arm64/kvm/arm.c

@@ -102,6 +102,20 @@ static int kvm_arm_default_max_vcpus(void)
 	return vgic_present ? kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
 }
 
+static void set_default_csv2(struct kvm *kvm)
+{
+	/*
+	 * The default is to expose CSV2 == 1 if the HW isn't affected.
+	 * Although this is a per-CPU feature, we make it global because
+	 * asymmetric systems are just a nuisance.
+	 *
+	 * Userspace can override this as long as it doesn't promise
+	 * the impossible.
+	 */
+	if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
+		kvm->arch.pfr0_csv2 = 1;
+}
+
 /**
  * kvm_arch_init_vm - initializes a VM data structure
  * @kvm:	pointer to the KVM struct
@@ -127,6 +141,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	/* The maximum number of VCPUs is limited by the host's GIC model */
 	kvm->arch.max_vcpus = kvm_arm_default_max_vcpus();
 
+	set_default_csv2(kvm);
+
 	return ret;
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(&kvm->arch.mmu);

arch/arm64/kvm/mmu.c

@@ -788,10 +788,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	}
 
 	switch (vma_shift) {
+#ifndef __PAGETABLE_PMD_FOLDED
 	case PUD_SHIFT:
 		if (fault_supports_stage2_huge_mapping(memslot, hva, PUD_SIZE))
 			break;
 		fallthrough;
+#endif
 	case CONT_PMD_SHIFT:
 		vma_shift = PMD_SHIFT;
 		fallthrough;

arch/arm64/kvm/sys_regs.c

@@ -1038,8 +1038,8 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	{ SYS_DESC(SYS_PMEVTYPERn_EL0(n)),					\
 	  access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
 
-static bool access_amu(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+static bool undef_access(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
-			     const struct sys_reg_desc *r)
+			 const struct sys_reg_desc *r)
 {
 	kvm_inject_undefined(vcpu);
 
@@ -1047,33 +1047,25 @@ static bool access_amu(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 }
 
 /* Macro to expand the AMU counter and type registers*/
-#define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), access_amu }
+#define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), undef_access }
-#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), access_amu }
+#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), undef_access }
-#define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), access_amu }
+#define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), undef_access }
-#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), access_amu }
+#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), undef_access }
-
-static bool trap_ptrauth(struct kvm_vcpu *vcpu,
-			 struct sys_reg_params *p,
-			 const struct sys_reg_desc *rd)
-{
-	/*
-	 * If we land here, that is because we didn't fixup the access on exit
-	 * by allowing the PtrAuth sysregs. The only way this happens is when
-	 * the guest does not have PtrAuth support enabled.
-	 */
-	kvm_inject_undefined(vcpu);
-
-	return false;
-}
 
 static unsigned int ptrauth_visibility(const struct kvm_vcpu *vcpu,
 			const struct sys_reg_desc *rd)
 {
-	return vcpu_has_ptrauth(vcpu) ? 0 : REG_HIDDEN_USER | REG_HIDDEN_GUEST;
+	return vcpu_has_ptrauth(vcpu) ? 0 : REG_HIDDEN;
 }
 
+/*
+ * If we land here on a PtrAuth access, that is because we didn't
+ * fixup the access on exit by allowing the PtrAuth sysregs. The only
+ * way this happens is when the guest does not have PtrAuth support
+ * enabled.
+ */
 #define __PTRAUTH_KEY(k)						\
-	{ SYS_DESC(SYS_## k), trap_ptrauth, reset_unknown, k,		\
+	{ SYS_DESC(SYS_## k), undef_access, reset_unknown, k,		\
 	.visibility = ptrauth_visibility}
 
 #define PTRAUTH_KEY(k)							\
@@ -1128,9 +1120,8 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 		if (!vcpu_has_sve(vcpu))
 			val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT);
 		val &= ~(0xfUL << ID_AA64PFR0_AMU_SHIFT);
-		if (!(val & (0xfUL << ID_AA64PFR0_CSV2_SHIFT)) &&
+		val &= ~(0xfUL << ID_AA64PFR0_CSV2_SHIFT);
-		    arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
+		val |= ((u64)vcpu->kvm->arch.pfr0_csv2 << ID_AA64PFR0_CSV2_SHIFT);
-			val |= (1UL << ID_AA64PFR0_CSV2_SHIFT);
 	} else if (id == SYS_ID_AA64PFR1_EL1) {
 		val &= ~(0xfUL << ID_AA64PFR1_MTE_SHIFT);
 	} else if (id == SYS_ID_AA64ISAR1_EL1 && !vcpu_has_ptrauth(vcpu)) {
@@ -1153,6 +1144,22 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 	return val;
 }
 
+static unsigned int id_visibility(const struct kvm_vcpu *vcpu,
+				  const struct sys_reg_desc *r)
+{
+	u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
+			 (u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+
+	switch (id) {
+	case SYS_ID_AA64ZFR0_EL1:
+		if (!vcpu_has_sve(vcpu))
+			return REG_RAZ;
+		break;
+	}
+
+	return 0;
+}
+
 /* cpufeature ID register access trap handlers */
 
 static bool __access_id_reg(struct kvm_vcpu *vcpu,
@@ -1171,7 +1178,9 @@ static bool access_id_reg(struct kvm_vcpu *vcpu,
 			  struct sys_reg_params *p,
 			  const struct sys_reg_desc *r)
 {
-	return __access_id_reg(vcpu, p, r, false);
+	bool raz = sysreg_visible_as_raz(vcpu, r);
+
+	return __access_id_reg(vcpu, p, r, raz);
 }
 
 static bool access_raz_id_reg(struct kvm_vcpu *vcpu,
@@ -1192,71 +1201,40 @@ static unsigned int sve_visibility(const struct kvm_vcpu *vcpu,
 	if (vcpu_has_sve(vcpu))
 		return 0;
 
-	return REG_HIDDEN_USER | REG_HIDDEN_GUEST;
+	return REG_HIDDEN;
 }
 
-/* Visibility overrides for SVE-specific ID registers */
+static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
-static unsigned int sve_id_visibility(const struct kvm_vcpu *vcpu,
+			       const struct sys_reg_desc *rd,
-				      const struct sys_reg_desc *rd)
+			       const struct kvm_one_reg *reg, void __user *uaddr)
-{
-	if (vcpu_has_sve(vcpu))
-		return 0;
-
-	return REG_HIDDEN_USER;
-}
-
-/* Generate the emulated ID_AA64ZFR0_EL1 value exposed to the guest */
-static u64 guest_id_aa64zfr0_el1(const struct kvm_vcpu *vcpu)
-{
-	if (!vcpu_has_sve(vcpu))
-		return 0;
-
-	return read_sanitised_ftr_reg(SYS_ID_AA64ZFR0_EL1);
-}
-
-static bool access_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
-				   struct sys_reg_params *p,
-				   const struct sys_reg_desc *rd)
-{
-	if (p->is_write)
-		return write_to_read_only(vcpu, p, rd);
-
-	p->regval = guest_id_aa64zfr0_el1(vcpu);
-	return true;
-}
-
-static int get_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
-		const struct sys_reg_desc *rd,
-		const struct kvm_one_reg *reg, void __user *uaddr)
-{
-	u64 val;
-
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
-
-	val = guest_id_aa64zfr0_el1(vcpu);
-	return reg_to_user(uaddr, &val, reg->id);
-}
-
-static int set_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
-		const struct sys_reg_desc *rd,
-		const struct kvm_one_reg *reg, void __user *uaddr)
 {
 	const u64 id = sys_reg_to_index(rd);
 	int err;
 	u64 val;
-
+	u8 csv2;
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
 
 	err = reg_from_user(&val, uaddr, id);
 	if (err)
 		return err;
 
-	/* This is what we mean by invariant: you can't change it. */
+	/*
-	if (val != guest_id_aa64zfr0_el1(vcpu))
+	 * Allow AA64PFR0_EL1.CSV2 to be set from userspace as long as
+	 * it doesn't promise more than what is actually provided (the
+	 * guest could otherwise be covered in ectoplasmic residue).
+	 */
+	csv2 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_CSV2_SHIFT);
+	if (csv2 > 1 ||
+	    (csv2 && arm64_get_spectre_v2_state() != SPECTRE_UNAFFECTED))
 		return -EINVAL;
 
+	/* We can only differ with CSV2, and anything else is an error */
+	val ^= read_id_reg(vcpu, rd, false);
+	val &= ~(0xFUL << ID_AA64PFR0_CSV2_SHIFT);
+	if (val)
+		return -EINVAL;
+
+	vcpu->kvm->arch.pfr0_csv2 = csv2;
+
 	return 0;
 }
 
@@ -1299,13 +1277,17 @@ static int __set_id_reg(const struct kvm_vcpu *vcpu,
 static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		      const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	return __get_id_reg(vcpu, rd, uaddr, false);
+	bool raz = sysreg_visible_as_raz(vcpu, rd);
+
+	return __get_id_reg(vcpu, rd, uaddr, raz);
 }
 
 static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		      const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	return __set_id_reg(vcpu, rd, uaddr, false);
+	bool raz = sysreg_visible_as_raz(vcpu, rd);
+
+	return __set_id_reg(vcpu, rd, uaddr, raz);
 }
 
 static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
@@ -1384,19 +1366,13 @@ static bool access_ccsidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	return true;
 }
 
-static bool access_mte_regs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
-			    const struct sys_reg_desc *r)
-{
-	kvm_inject_undefined(vcpu);
-	return false;
-}
-
 /* sys_reg_desc initialiser for known cpufeature ID registers */
 #define ID_SANITISED(name) {			\
 	SYS_DESC(SYS_##name),			\
 	.access	= access_id_reg,		\
 	.get_user = get_id_reg,			\
 	.set_user = set_id_reg,			\
+	.visibility = id_visibility,		\
 }
 
 /*
@@ -1514,11 +1490,12 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* AArch64 ID registers */
 	/* CRm=4 */
-	ID_SANITISED(ID_AA64PFR0_EL1),
+	{ SYS_DESC(SYS_ID_AA64PFR0_EL1), .access = access_id_reg,
+	  .get_user = get_id_reg, .set_user = set_id_aa64pfr0_el1, },
 	ID_SANITISED(ID_AA64PFR1_EL1),
 	ID_UNALLOCATED(4,2),
 	ID_UNALLOCATED(4,3),
-	{ SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, .visibility = sve_id_visibility },
+	ID_SANITISED(ID_AA64ZFR0_EL1),
 	ID_UNALLOCATED(4,5),
 	ID_UNALLOCATED(4,6),
 	ID_UNALLOCATED(4,7),
@@ -1557,8 +1534,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
 
-	{ SYS_DESC(SYS_RGSR_EL1), access_mte_regs },
+	{ SYS_DESC(SYS_RGSR_EL1), undef_access },
-	{ SYS_DESC(SYS_GCR_EL1), access_mte_regs },
+	{ SYS_DESC(SYS_GCR_EL1), undef_access },
 
 	{ SYS_DESC(SYS_ZCR_EL1), NULL, reset_val, ZCR_EL1, 0, .visibility = sve_visibility },
 	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1584,8 +1561,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi },
 	{ SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi },
 
-	{ SYS_DESC(SYS_TFSR_EL1), access_mte_regs },
+	{ SYS_DESC(SYS_TFSR_EL1), undef_access },
-	{ SYS_DESC(SYS_TFSRE0_EL1), access_mte_regs },
+	{ SYS_DESC(SYS_TFSRE0_EL1), undef_access },
 
 	{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
 	{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
@@ -1621,6 +1598,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
 	{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
 
+	{ SYS_DESC(SYS_SCXTNUM_EL1), undef_access },
+
 	{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
 
 	{ SYS_DESC(SYS_CCSIDR_EL1), access_ccsidr },
@@ -1649,14 +1628,16 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
 	{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
 
-	{ SYS_DESC(SYS_AMCR_EL0), access_amu },
+	{ SYS_DESC(SYS_SCXTNUM_EL0), undef_access },
-	{ SYS_DESC(SYS_AMCFGR_EL0), access_amu },
+
-	{ SYS_DESC(SYS_AMCGCR_EL0), access_amu },
+	{ SYS_DESC(SYS_AMCR_EL0), undef_access },
-	{ SYS_DESC(SYS_AMUSERENR_EL0), access_amu },
+	{ SYS_DESC(SYS_AMCFGR_EL0), undef_access },
-	{ SYS_DESC(SYS_AMCNTENCLR0_EL0), access_amu },
+	{ SYS_DESC(SYS_AMCGCR_EL0), undef_access },
-	{ SYS_DESC(SYS_AMCNTENSET0_EL0), access_amu },
+	{ SYS_DESC(SYS_AMUSERENR_EL0), undef_access },
-	{ SYS_DESC(SYS_AMCNTENCLR1_EL0), access_amu },
+	{ SYS_DESC(SYS_AMCNTENCLR0_EL0), undef_access },
-	{ SYS_DESC(SYS_AMCNTENSET1_EL0), access_amu },
+	{ SYS_DESC(SYS_AMCNTENSET0_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENCLR1_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENSET1_EL0), undef_access },
 	AMU_AMEVCNTR0_EL0(0),
 	AMU_AMEVCNTR0_EL0(1),
 	AMU_AMEVCNTR0_EL0(2),
@@ -2185,7 +2166,7 @@ static void perform_access(struct kvm_vcpu *vcpu,
 	trace_kvm_sys_access(*vcpu_pc(vcpu), params, r);
 
 	/* Check for regs disabled by runtime config */
-	if (sysreg_hidden_from_guest(vcpu, r)) {
+	if (sysreg_hidden(vcpu, r)) {
 		kvm_inject_undefined(vcpu);
 		return;
 	}
@@ -2684,7 +2665,7 @@ int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg
 		return get_invariant_sys_reg(reg->id, uaddr);
 
 	/* Check for regs disabled by runtime config */
-	if (sysreg_hidden_from_user(vcpu, r))
+	if (sysreg_hidden(vcpu, r))
 		return -ENOENT;
 
 	if (r->get_user)
@@ -2709,7 +2690,7 @@ int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg
 		return set_invariant_sys_reg(reg->id, uaddr);
 
 	/* Check for regs disabled by runtime config */
-	if (sysreg_hidden_from_user(vcpu, r))
+	if (sysreg_hidden(vcpu, r))
 		return -ENOENT;
 
 	if (r->set_user)
@@ -2780,7 +2761,7 @@ static int walk_one_sys_reg(const struct kvm_vcpu *vcpu,
 	if (!(rd->reg || rd->get_user))
 		return 0;
 
-	if (sysreg_hidden_from_user(vcpu, rd))
+	if (sysreg_hidden(vcpu, rd))
 		return 0;
 
 	if (!copy_reg_to_user(rd, uind))

arch/arm64/kvm/sys_regs.h

@@ -59,8 +59,8 @@ struct sys_reg_desc {
 				   const struct sys_reg_desc *rd);
 };
 
-#define REG_HIDDEN_USER		(1 << 0) /* hidden from userspace ioctls */
+#define REG_HIDDEN		(1 << 0) /* hidden from userspace and guest */
-#define REG_HIDDEN_GUEST	(1 << 1) /* hidden from guest */
+#define REG_RAZ			(1 << 1) /* RAZ from userspace and guest */
 
 static __printf(2, 3)
 inline void print_sys_reg_msg(const struct sys_reg_params *p,
@@ -111,22 +111,22 @@ static inline void reset_val(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r
 	__vcpu_sys_reg(vcpu, r->reg) = r->val;
 }
 
-static inline bool sysreg_hidden_from_guest(const struct kvm_vcpu *vcpu,
+static inline bool sysreg_hidden(const struct kvm_vcpu *vcpu,
-					    const struct sys_reg_desc *r)
+				 const struct sys_reg_desc *r)
 {
 	if (likely(!r->visibility))
 		return false;
 
-	return r->visibility(vcpu, r) & REG_HIDDEN_GUEST;
+	return r->visibility(vcpu, r) & REG_HIDDEN;
 }
 
-static inline bool sysreg_hidden_from_user(const struct kvm_vcpu *vcpu,
+static inline bool sysreg_visible_as_raz(const struct kvm_vcpu *vcpu,
-					   const struct sys_reg_desc *r)
+					 const struct sys_reg_desc *r)
 {
 	if (likely(!r->visibility))
 		return false;
 
-	return r->visibility(vcpu, r) & REG_HIDDEN_USER;
+	return r->visibility(vcpu, r) & REG_RAZ;
 }
 
 static inline int cmp_sys_reg(const struct sys_reg_desc *i1,

arch/arm64/mm/mmu.c

@@ -1444,11 +1444,28 @@ static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size)
 	free_empty_tables(start, end, PAGE_OFFSET, PAGE_END);
 }
 
+static bool inside_linear_region(u64 start, u64 size)
+{
+	/*
+	 * Linear mapping region is the range [PAGE_OFFSET..(PAGE_END - 1)]
+	 * accommodating both its ends but excluding PAGE_END. Max physical
+	 * range which can be mapped inside this linear mapping range, must
+	 * also be derived from its end points.
+	 */
+	return start >= __pa(_PAGE_OFFSET(vabits_actual)) &&
+	       (start + size - 1) <= __pa(PAGE_END - 1);
+}
+
 int arch_add_memory(int nid, u64 start, u64 size,
 		    struct mhp_params *params)
 {
 	int ret, flags = 0;
 
+	if (!inside_linear_region(start, size)) {
+		pr_err("[%llx %llx] is outside linear mapping region\n", start, start + size);
+		return -EINVAL;
+	}
+
 	if (rodata_full || debug_pagealloc_enabled())
 		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 

arch/csky/kernel/perf_regs.c

@@ -32,8 +32,7 @@ u64 perf_reg_abi(struct task_struct *task)
 }
 
 void perf_get_regs_user(struct perf_regs *regs_user,
-			struct pt_regs *regs,
+			struct pt_regs *regs)
-			struct pt_regs *regs_user_copy)
 {
 	regs_user->regs = task_pt_regs(current);
 	regs_user->abi = perf_reg_abi(current);

arch/ia64/include/asm/sparsemem.h

@@ -18,4 +18,10 @@
 #endif
 
 #endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int memory_add_physaddr_to_nid(u64 addr);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif
+
 #endif /* _ASM_IA64_SPARSEMEM_H */

arch/mips/alchemy/common/clock.c

@@ -152,6 +152,7 @@ static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
 {
 	struct clk_init_data id;
 	struct clk_hw *h;
+	struct clk *clk;
 
 	h = kzalloc(sizeof(*h), GFP_KERNEL);
 	if (!h)
@@ -164,7 +165,13 @@ static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
 	id.ops = &alchemy_clkops_cpu;
 	h->init = &id;
 
-	return clk_register(NULL, h);
+	clk = clk_register(NULL, h);
+	if (IS_ERR(clk)) {
+		pr_err("failed to register clock\n");
+		kfree(h);
+	}
+
+	return clk;
 }
 
 /* AUXPLLs ************************************************************/

arch/mips/kernel/setup.c

@@ -262,8 +262,8 @@ static void __init bootmem_init(void)
 static void __init bootmem_init(void)
 {
 	phys_addr_t ramstart, ramend;
-	phys_addr_t start, end;
+	unsigned long start, end;
-	u64 i;
+	int i;
 
 	ramstart = memblock_start_of_DRAM();
 	ramend = memblock_end_of_DRAM();
@@ -300,7 +300,7 @@ static void __init bootmem_init(void)
 
 	min_low_pfn = ARCH_PFN_OFFSET;
 	max_pfn = PFN_DOWN(ramend);
-	for_each_mem_range(i, &start, &end) {
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) {
 		/*
 		 * Skip highmem here so we get an accurate max_low_pfn if low
 		 * memory stops short of high memory.

arch/mips/mm/tlb-r4k.c

@@ -438,6 +438,7 @@ int has_transparent_hugepage(void)
 	}
 	return mask == PM_HUGE_MASK;
 }
+EXPORT_SYMBOL(has_transparent_hugepage);
 
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE  */
 

arch/powerpc/include/asm/book3s/64/kup-radix.h

@@ -27,6 +27,7 @@
 #endif
 .endm
 
+#ifdef CONFIG_PPC_KUAP
 .macro kuap_check_amr gpr1, gpr2
 #ifdef CONFIG_PPC_KUAP_DEBUG
 	BEGIN_MMU_FTR_SECTION_NESTED(67)
@@ -38,6 +39,7 @@
 	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
 #endif
 .endm
+#endif
 
 .macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr
 #ifdef CONFIG_PPC_KUAP
@@ -61,6 +63,8 @@
 
 #else /* !__ASSEMBLY__ */
 
+DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
+
 #ifdef CONFIG_PPC_KUAP
 
 #include <asm/mmu.h>
@@ -103,8 +107,16 @@ static inline void kuap_check_amr(void)
 
 static inline unsigned long get_kuap(void)
 {
+	/*
+	 * We return AMR_KUAP_BLOCKED when we don't support KUAP because
+	 * prevent_user_access_return needs to return AMR_KUAP_BLOCKED to
+	 * cause restore_user_access to do a flush.
+	 *
+	 * This has no effect in terms of actually blocking things on hash,
+	 * so it doesn't break anything.
+	 */
 	if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP))
-		return 0;
+		return AMR_KUAP_BLOCKED;
 
 	return mfspr(SPRN_AMR);
 }
@@ -123,6 +135,29 @@ static inline void set_kuap(unsigned long value)
 	isync();
 }
 
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
+		    (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
+		    "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
+}
+#else /* CONFIG_PPC_KUAP */
+static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) { }
+
+static inline unsigned long kuap_get_and_check_amr(void)
+{
+	return 0UL;
+}
+
+static inline unsigned long get_kuap(void)
+{
+	return AMR_KUAP_BLOCKED;
+}
+
+static inline void set_kuap(unsigned long value) { }
+#endif /* !CONFIG_PPC_KUAP */
+
 static __always_inline void allow_user_access(void __user *to, const void __user *from,
 					      unsigned long size, unsigned long dir)
 {
@@ -142,6 +177,8 @@ static inline void prevent_user_access(void __user *to, const void __user *from,
 				       unsigned long size, unsigned long dir)
 {
 	set_kuap(AMR_KUAP_BLOCKED);
+	if (static_branch_unlikely(&uaccess_flush_key))
+		do_uaccess_flush();
 }
 
 static inline unsigned long prevent_user_access_return(void)
@@ -149,6 +186,8 @@ static inline unsigned long prevent_user_access_return(void)
 	unsigned long flags = get_kuap();
 
 	set_kuap(AMR_KUAP_BLOCKED);
+	if (static_branch_unlikely(&uaccess_flush_key))
+		do_uaccess_flush();
 
 	return flags;
 }
@@ -156,30 +195,9 @@ static inline unsigned long prevent_user_access_return(void)
 static inline void restore_user_access(unsigned long flags)
 {
 	set_kuap(flags);
+	if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED)
+		do_uaccess_flush();
 }
-
-static inline bool
-bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
-{
-	return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
-		    (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
-		    "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
-}
-#else /* CONFIG_PPC_KUAP */
-static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr)
-{
-}
-
-static inline void kuap_check_amr(void)
-{
-}
-
-static inline unsigned long kuap_get_and_check_amr(void)
-{
-	return 0;
-}
-#endif /* CONFIG_PPC_KUAP */
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */

arch/powerpc/include/asm/exception-64s.h

@@ -57,11 +57,18 @@
 	nop;								\
 	nop
 
+#define ENTRY_FLUSH_SLOT						\
+	ENTRY_FLUSH_FIXUP_SECTION;					\
+	nop;								\
+	nop;								\
+	nop;
+
 /*
  * r10 must be free to use, r13 must be paca
  */
 #define INTERRUPT_TO_KERNEL						\
-	STF_ENTRY_BARRIER_SLOT
+	STF_ENTRY_BARRIER_SLOT;						\
+	ENTRY_FLUSH_SLOT
 
 /*
  * Macros for annotating the expected destination of (h)rfid
@@ -137,6 +144,9 @@
 	RFSCV;								\
 	b	rfscv_flush_fallback
 
+#else /* __ASSEMBLY__ */
+/* Prototype for function defined in exceptions-64s.S */
+void do_uaccess_flush(void);
 #endif /* __ASSEMBLY__ */
 
 #endif	/* _ASM_POWERPC_EXCEPTION_H */

arch/powerpc/include/asm/feature-fixups.h

@@ -205,6 +205,22 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET 955b-956b;			\
 	.popsection;
 
+#define UACCESS_FLUSH_FIXUP_SECTION			\
+959:							\
+	.pushsection __uaccess_flush_fixup,"a";		\
+	.align 2;					\
+960:							\
+	FTR_ENTRY_OFFSET 959b-960b;			\
+	.popsection;
+
+#define ENTRY_FLUSH_FIXUP_SECTION			\
+957:							\
+	.pushsection __entry_flush_fixup,"a";		\
+	.align 2;					\
+958:							\
+	FTR_ENTRY_OFFSET 957b-958b;			\
+	.popsection;
+
 #define RFI_FLUSH_FIXUP_SECTION				\
 951:							\
 	.pushsection __rfi_flush_fixup,"a";		\
@@ -237,8 +253,11 @@ label##3:					       	\
 #include <linux/types.h>
 
 extern long stf_barrier_fallback;
+extern long entry_flush_fallback;
 extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
 extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
+extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
 extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
 extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
 extern long __start__btb_flush_fixup, __stop__btb_flush_fixup;

arch/powerpc/include/asm/kup.h

@@ -14,7 +14,7 @@
 #define KUAP_CURRENT_WRITE	8
 #define KUAP_CURRENT		(KUAP_CURRENT_READ | KUAP_CURRENT_WRITE)
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/book3s/64/kup-radix.h>
 #endif
 #ifdef CONFIG_PPC_8xx
@@ -35,6 +35,9 @@
 .macro kuap_check	current, gpr
 .endm
 
+.macro kuap_check_amr	gpr1, gpr2
+.endm
+
 #endif
 
 #else /* !__ASSEMBLY__ */
@@ -53,17 +56,28 @@ static inline void setup_kuep(bool disabled) { }
 void setup_kuap(bool disabled);
 #else
 static inline void setup_kuap(bool disabled) { }
+
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	return false;
+}
+
+static inline void kuap_check_amr(void) { }
+
+/*
+ * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush
+ * the L1D cache after user accesses. Only include the empty stubs for other
+ * platforms.
+ */
+#ifndef CONFIG_PPC_BOOK3S_64
 static inline void allow_user_access(void __user *to, const void __user *from,
 				     unsigned long size, unsigned long dir) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
 				       unsigned long size, unsigned long dir) { }
 static inline unsigned long prevent_user_access_return(void) { return 0UL; }
 static inline void restore_user_access(unsigned long flags) { }
-static inline bool
+#endif /* CONFIG_PPC_BOOK3S_64 */
-bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
-{
-	return false;
-}
 #endif /* CONFIG_PPC_KUAP */
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)

arch/powerpc/include/asm/mmzone.h

@@ -46,5 +46,10 @@ u64 memory_hotplug_max(void);
 #define __HAVE_ARCH_RESERVED_KERNEL_PAGES
 #endif
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern int create_section_mapping(unsigned long start, unsigned long end,
+				  int nid, pgprot_t prot);
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_MMZONE_H_ */