From 9be4b17c4c900f634ab9be3d13e116aa31edb7cb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Jul 2009 23:41:12 +0100 Subject: [PATCH 1/7] [ARM] 5579/1: Updated U300 defconfig This defconfig update selects all the new U300 drivers merged for 2.6.31-rc1 in the merge window and add defaults for the new config options. It compiles and boots nicely from initramfs on the U300. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/u300_defconfig | 92 +++++++++++++++++++-------------- 1 file changed, 53 insertions(+), 39 deletions(-) diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e121147..4762d9001298 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 00:16:59 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +79,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,20 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y From 4ebfc3dba59fb84b315ebb0059347dc9342a32f1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 2 Jul 2009 00:27:57 +0100 Subject: [PATCH 2/7] [ARM] 5581/1: U300 clock updates This adds a few default locks to the clocks (the clocks were used before the locks were initialized by code), then renames the clocks a bit to fit with the latest driver names (some changed during review). Lastly it moves the initialization of the clock debugfs entry to module_init() initcall level since the debugfs isn't up in core_initcall(). Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/clock.c | 121 ++++++++++++++++++++++++------------- 1 file changed, 80 insertions(+), 41 deletions(-) diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b3..111f7ea32b38 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. From 66d9e2102af038bcd3286a6efce83e1877e5997b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Sun, 28 Jun 2009 11:19:39 +0100 Subject: [PATCH 3/7] [ARM] 5576/1: Update kb9202_defconfig The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the configuration in order to produce a bootable image. Signed-off-by: Matthias Kaehlcke Signed-off-by: Russell King --- arch/arm/configs/kb9202_defconfig | 1206 +++++++++++++++++++++-------- 1 file changed, 866 insertions(+), 340 deletions(-) diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66f239d..605a8462f172 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # -# AT91RM9200 Implementations +# Atmel AT91 System-on-Chip # +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,19 +319,93 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -170,53 +414,156 @@ CONFIG_BINFMT_MISC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # -# Memory Technology Devices (MTD) +# User Modules And Translation Layers # -# CONFIG_MTD is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # -# Parallel port support +# RAM/ROM/Flash chip drivers # +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers # # -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,159 +709,232 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_AT91_SPI is not set - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# Misc devices +# Memory mapped GPIO expanders: # +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + # # Multimedia devices # -# CONFIG_VIDEO_DEV is not set # -# Digital Video Broadcasting Devices +# Multimedia core support # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -579,55 +942,129 @@ CONFIG_USB_STORAGE_DEBUG=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# OTG and related infrastructure # -# CONFIG_MMC is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y From ba9b42e4ff5eb68f9c946378229d7e45299d7151 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Jul 2009 10:50:37 +0100 Subject: [PATCH 4/7] [ARM] export __cpu_flush_dcache_page Now required for libsas: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 1096 modules ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined! Signed-off-by: Russell King --- arch/arm/mm/proc-syms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48edd8c2..ac5c80062b70 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); From fb93a1c75eb646fde35985e9af23da936775ae52 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Jul 2009 11:30:15 +0100 Subject: [PATCH 5/7] [ARM] pgtable: swp pte layout documentation, definitions, and check Document the layout of our swp PTE entries, adding definitions for the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK() such that we fail to build if we are unable to properly encode the swp type field. Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d6416bda..c1d97938f3e2 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -384,16 +384,36 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: * - * We support up to 32GB of swap on 4k machines + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <--- type --> 0 0 + * + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 2 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) From 65b1bfc13e8f50034187e339aa12b81cd6785bd5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Jul 2009 11:52:21 +0100 Subject: [PATCH 6/7] [ARM] pgtable: file pte layout documentation Document the layout of our file PTE entries. Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index c1d97938f3e2..c433c6c73112 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -285,15 +285,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -414,6 +405,20 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; */ #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------------ offset -------------------------> 1 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) From 557dca5f48a45df88a73e69ee0700cfd4e2358c9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Jul 2009 22:39:08 +0100 Subject: [PATCH 7/7] [ARM] amba: fix amba device resources AMBA device resources were being reported as: 10004000-10004fff : This is because dev_name() was returning NULL prior to device_register. Ensure that the struct device is properly initialized, and the name is set before adding it to the device tree. Signed-off-by: Russell King --- drivers/amba/bus.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 3d763fdf99b7..246650673010 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -207,6 +207,16 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) void __iomem *tmp; int i, ret; + device_initialize(&dev->dev); + + /* + * Copy from device_add + */ + if (dev->dev.init_name) { + dev_set_name(&dev->dev, "%s", dev->dev.init_name); + dev->dev.init_name = NULL; + } + dev->dev.release = amba_device_release; dev->dev.bus = &amba_bustype; dev->dev.dma_mask = &dev->dma_mask; @@ -240,7 +250,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) goto err_release; } - ret = device_register(&dev->dev); + ret = device_add(&dev->dev); if (ret) goto err_release;