ARCv2: IDU-intc: Delete deprecated parameters in Device Trees

No need for specifying a list of interrupts in the declaration
of IDU interrupt controller anymore since the kernel can obtain
a number of supported interrupts from the build register.

Also delete support of the second parameter for devices which
are connected to IDU because it is not used anywhere.

Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -8,15 +8,11 @@ Properties:
 - compatible: "snps,archs-idu-intc"
 - interrupt-controller: This is an interrupt controller.
 - interrupt-parent: <reference to parent core intc>
-- #interrupt-cells: Must be <2>.
+- #interrupt-cells: Must be <1>.
-- interrupts: <...> specifies the upstream core irqs
 
-  First cell specifies the "common" IRQ from peripheral to IDU
+  Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
-  Second cell specifies the irq distribution mode to cores
+  of the particular interrupt line of IDU corresponds to the line N+24 of the
-     0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+  core interrupt controller.
-
-  The second cell in interrupts property is deprecated and may be ignored by
-  the kernel.
 
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
@@ -32,18 +28,10 @@ Example:
 		compatible = "snps,archs-idu-intc";
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
-
+		#interrupt-cells = <1>;
-		/*
-		 * <hwirq  distribution>
-		 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-		 */
-		#interrupt-cells = <2>;
-
-		/* upstream core irqs: downstream these are "COMMON" irq 0,1..  */
-		interrupts = <24 25 26 27 28 29 30 31>;
 	};
 
 	some_device: serial@c0fc1000 {
 		interrupt-parent = <&idu_intc>;
-		interrupts = <0 0>;	/* upstream idu IRQ #24, Round Robin */
+		interrupts = <0>;	/* upstream idu IRQ #24 */
 	};

arch/arc/boot/dts/axc003_idu.dtsi

@@ -40,18 +40,7 @@
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25>;
 		};
 
 		/*
@@ -73,12 +62,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupt-parent = <&idu_intc>;
-
+				interrupts = <1>;
-				/*
-				 * cmn irq 1 -> cpu irq 25
-				 * Distribute to cpu0 only
-				 */
-				interrupts = <1 1>;
 			};
 		};
 
@@ -119,8 +103,7 @@
 		reg = < 0xe0012000 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
-		interrupts = <0 1>;	/* cmn irq 0 -> cpu irq 24
+		interrupts = <0>;
-					   distribute to cpu0 only */
 	};
 
 	memory {

arch/arc/boot/dts/haps_hs_idu.dts

@@ -54,11 +54,7 @@
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-			/* <hwirq  distribution>
+			#interrupt-cells = <1>;
-			distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 */
-			#interrupt-cells = <2>;
-			interrupts = <24 25 26 27 28 29 30 31>;
-
 		};
 
 		uart0: serial@f0000000 {
@@ -66,9 +62,7 @@
 			compatible = "ns16550a";
 			reg = <0xf0000000 0x2000>;
 			interrupt-parent = <&idu_intc>;
-			/* interrupts = <0 1>;  DEST=1*/
+			interrupts = <0>;
-			/* interrupts = <0 2>;  DEST=2*/
-			interrupts = <0 0>;  /* RR*/
 			clock-frequency = <50000000>;
 			baud = <115200>;
 			reg-shift = <2>;

arch/arc/boot/dts/nsim_hs_idu.dts

@@ -46,25 +46,14 @@
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25 26 27 28 29 30 31>;
 		};
 
 		arcuart0: serial@c0fc1000 {
 			compatible = "snps,arc-uart";
 			reg = <0xc0fc1000 0x100>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <0 0>;
+			interrupts = <0>;
 			clock-frequency = <80000000>;
 			current-speed = <115200>;
 			status = "okay";

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -50,26 +50,14 @@
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25 26 27 28 29 30 31>;
 		};
 
 		uart0: serial@f0000000 {
 			compatible = "ns8250";
 			reg = <0xf0000000 0x2000>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <0 0>; /* cmn irq 0 -> cpu irq 24
+			interrupts = <0>;
-						RR distribute to all cpus */
 			clock-frequency = <3686400>;
 			baud = <115200>;
 			reg-shift = <2>;
@@ -93,7 +81,7 @@
 		ps2: ps2@f9001000 {
 			compatible = "snps,arc_ps2";
 			reg = <0xf9000400 0x14>;
-			interrupts = <3 0>;
+			interrupts = <3>;
 			interrupt-parent = <&idu_intc>;
 			interrupt-names = "arc_ps2_irq";
 		};
@@ -102,7 +90,7 @@
 			compatible = "ezchip,nps-mgt-enet";
 			reg = <0xf0003000 0x44>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <1 2>;
+			interrupts = <1>;
 		};
 
 		arcpct0: pct {

arch/arc/boot/dts/vdk_axc003_idu.dtsi

@@ -41,14 +41,7 @@
 			compatible = "snps,archs-idu-intc";
 			interrupt-controller;
 			interrupt-parent = <&core_intc>;
-
+			#interrupt-cells = <1>;
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			interrupts = <24 25 26 27>;
 		};
 
 		debug_uart: dw-apb-uart@0x5000 {
@@ -56,7 +49,7 @@
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <2 0>;
+			interrupts = <2>;
 			baud = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -70,7 +63,7 @@
 		reg = < 0xe0012000 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
-		interrupts = < 0 0 >;
+		interrupts = <0>;
 	};
 
 	memory {

arch/arc/kernel/mcip.c

@@ -255,23 +255,8 @@ static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t
 	return 0;
 }
 
-static int idu_irq_xlate(struct irq_domain *d, struct device_node *n,
-			 const u32 *intspec, unsigned int intsize,
-			 irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	/*
-	 * Ignore value of interrupt distribution mode for common interrupts in
-	 * IDU which resides in intspec[1] since setting an affinity using value
-	 * from Device Tree is deprecated in ARC.
-	 */
-	*out_hwirq = intspec[0];
-	*out_type = IRQ_TYPE_NONE;
-
-	return 0;
-}
-
 static const struct irq_domain_ops idu_irq_ops = {
-	.xlate	= idu_irq_xlate,
+	.xlate	= irq_domain_xlate_onecell,
 	.map	= idu_irq_map,
 };