hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ASoC: Updates for v3.17 

This has been a pretty exciting release in terms of the framework, we've
 finally got support for multiple CODECs attached to a single DAI link
 which has been something there's been interest in as long as I've been
 working on ASoC.  A big thanks to Benoit and Misael for their work on
 this.
 
 Otherwise it's been a fairly standard release for development, including
 more componentisation work from Lars-Peter and a good selection of both
 CODEC and CPU drivers.
 
  - Support for multiple CODECs attached to a single DAI, enabling
    systems with for example multiple DAC/speaker drivers on a single
    link, contributed by Benoit Cousson based on work from Misael Lopez
    Cruz.
  - Support for byte controls larger than 256 bytes based on the use of
    TLVs contributed by Omair Mohammed Abdullah.
  - More componentisation work from Lars-Peter Clausen.
  - The remainder of the conversions of CODEC drivers to params_width()
  - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
    RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
    TAS2552.
  - Lots of updates and fixes, especially to the DaVinci, Intel,
    Freescale, Realtek, and rcar drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT37EhAAoJELSic+t+oim9ELcP/j4ve2Zb3zqVn+md2fJNLFt6
 7rD8eZTvy9XEoYVLIxNOroiM4Dl6m0FlA3gigzbpHLRUlZWH6JB1EDsn/kuB910Y
 E9T76HVzznUtmoEbbo2CRYelsO2I3RmlpJWYrzfkwQVAnSd+tQmWixypZzKEJcvP
 F+1gUA5DlTnSrDtFAcA0n5xhqczbrJ51l5l2irVf1eKdWTepixk0tMBonadb/s3V
 Uh+EPl2htEmjpo4fHDzcULGCQABtiPn9ebV4urQnhWMifJehk5md9WyQchaRCz8c
 95ERNc+hLbrTUEALSgI46PWP497hdz4kd1B1jahLGSnWqRIgm/NwyhjqC47kgJfv
 8006v4nY4+T8d1yU4kFpB72f/xL6dxI53K6jRkie2WUQy+4L7kNp3egDJ4at9MdA
 iFSq+XzOmN978XVlYOj/9KXVS/fpgslYYwa+omok45MbqCWg8EZbWdFwv/uXlbza
 ldDjPKvz5LYfnSNES30Q29TMKnqvmdbIzbgqWPnT2RR4x0mxT6MWh5yM0WBBXqNV
 TM791q5cgUr07+f8LeeCS5J99H0OuElqn0OPIWOcqN2MI4Qp+8ZuswBCQtZ6i1V7
 oleSIPc4clchsXuRF83vD4JjZYkx7wqTOmmRHbKDB4d/LFLH3J2DHJH99CD1IX0a
 4J4h5Bmi2f3CCih7KLBD
 =pnce
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.17

This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC.  A big thanks to Benoit and Misael for their work on
this.

Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.

 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
   link, contributed by Benoit Cousson based on work from Misael Lopez
   Cruz.
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah.
 - More componentisation work from Lars-Peter Clausen.
 - The remainder of the conversions of CODEC drivers to params_width()
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
   TAS2552.
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers.
This commit is contained in:
Takashi Iwai 2014-08-04 18:28:21 +02:00
parent f42bb22243 ae34a78c43
commit e9e3bdffe3
895 changed files with 21838 additions and 6566 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
.mailmap
View File

@ -62,6 +62,11 @@ Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
John Stultz <johnstul@us.ibm.com>
<josh@joshtriplett.org> <josh@freedesktop.org>
<josh@joshtriplett.org> <josh@kernel.org>
<josh@joshtriplett.org> <josht@linux.vnet.ibm.com>
<josh@joshtriplett.org> <josht@us.ibm.com>
<josh@joshtriplett.org> <josht@vnet.ibm.com>
Juha Yrjola <at solidboot.com>
Juha Yrjola <juha.yrjola@nokia.com>
Juha Yrjola <juha.yrjola@solidboot.com>

7
CREDITS
View File

@ -3511,10 +3511,11 @@ S: MacGregor A.C.T 2615
S: Australia
N: Josh Triplett
E: josh@freedesktop.org
P: 1024D/D0FE7AFB B24A 65C9 1D71 2AC2 DE87 CA26 189B 9946 D0FE 7AFB
D: rcutorture maintainer
E: josh@joshtriplett.org
P: 4096R/8AFF873D 758E 5042 E397 4BA3 3A9C 1E67 0ED9 A3DF 8AFF 873D
D: RCU and rcutorture
D: lock annotations, finding and fixing lock bugs
D: kernel tinification
N: Winfried Trümper
E: winni@xpilot.org

9
Documentation/Changes
View File

@ -280,12 +280,9 @@ that is possible.
mcelog
------
In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
as a regular cronjob similar to the x86-64 kernel to process and log
machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
events are errors reported by the CPU. Processing them is strongly encouraged.
All x86-64 kernels since 2.6.4 require the mcelog utility to
process machine checks.
On x86 kernels the mcelog utility is needed to process and log machine check
events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
by the CPU. Processing them is strongly encouraged.
Getting updated software
========================

2
Documentation/DocBook/gadget.tmpl
View File

@ -708,7 +708,7 @@ hardware level details could be very different.
<para>Systems need specialized hardware support to implement OTG,
notably including a special <emphasis>Mini-AB</emphasis> jack
and associated transciever to support <emphasis>Dual-Role</emphasis>
and associated transceiver to support <emphasis>Dual-Role</emphasis>
operation:
they can act either as a host, using the standard
Linux-USB host side driver stack,

4
Documentation/DocBook/genericirq.tmpl
View File

@ -182,7 +182,7 @@
<para>
Each interrupt is described by an interrupt descriptor structure
irq_desc. The interrupt is referenced by an 'unsigned int' numeric
value which selects the corresponding interrupt decription structure
value which selects the corresponding interrupt description structure
in the descriptor structures array.
The descriptor structure contains status information and pointers
to the interrupt flow method and the interrupt chip structure
@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
<para>
To avoid copies of identical implementations of IRQ chips the
core provides a configurable generic interrupt chip
implementation. Developers should check carefuly whether the
implementation. Developers should check carefully whether the
generic chip fits their needs before implementing the same
functionality slightly differently themselves.
</para>

2
Documentation/DocBook/kernel-locking.tmpl
View File

@ -1760,7 +1760,7 @@ as it would be on UP.
</para>
<para>
There is a furthur optimization possible here: remember our original
There is a further optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if
you hold the lock, no one can delete the object, so you don't need to

6
Documentation/DocBook/libata.tmpl
View File

@ -677,7 +677,7 @@ and other resources, etc.
<listitem>
<para>
ATA_QCFLAG_ACTIVE is clared from qc->flags.
ATA_QCFLAG_ACTIVE is cleared from qc->flags.
</para>
</listitem>
@ -708,7 +708,7 @@ and other resources, etc.
<listitem>
<para>
qc->waiting is claread &amp; completed (in that order).
qc->waiting is cleared &amp; completed (in that order).
</para>
</listitem>
@ -1163,7 +1163,7 @@ and other resources, etc.
<para>
Once sense data is acquired, this type of errors can be
handled similary to other SCSI errors. Note that sense data
handled similarly to other SCSI errors. Note that sense data
may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
cases, the error should be considered as an ATA bus error and

2
Documentation/DocBook/media_api.tmpl
View File

@ -68,7 +68,7 @@
several digital tv standards. While it is called as DVB API,
in fact it covers several different video standards including
DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
<para>The third part covers the Remote Controller API.</para>
<para>The fourth part covers the Media Controller API.</para>
<para>For additional information and for the latest development code,

30
Documentation/DocBook/mtdnand.tmpl
View File

@ -91,7 +91,7 @@
<listitem><para>
[MTD Interface]</para><para>
These functions provide the interface to the MTD kernel API.
They are not replacable and provide functionality
They are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
@ -100,14 +100,14 @@
</para></listitem>
<listitem><para>
[GENERIC]</para><para>
Generic functions are not replacable and provide functionality
Generic functions are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
[DEFAULT]</para><para>
Default functions provide hardware related functionality which is suitable
for most of the implementations. These functions can be replaced by the
board driver if neccecary. Those functions are called via pointers in the
board driver if necessary. Those functions are called via pointers in the
NAND chip description structure. The board driver can set the functions which
should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
is set up nand_scan() is called. This function tries to
detect and identify then chip. If a chip is found all the
internal data fields are initialized accordingly.
The structure(s) have to be zeroed out first and then filled with the neccecary
The structure(s) have to be zeroed out first and then filled with the necessary
information about the device.
</para>
<programlisting>
@ -327,7 +327,7 @@ module_init(board_init);
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
The exit function is only necessary if the driver is
compiled as a module. It releases all resources which
are held by the chip driver and unregisters the partitions
in the MTD layer.
@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
in this case. See rts_from4.c and diskonchip.c for
implementation reference. In those cases we must also
use bad block tables on FLASH, because the ECC layout is
interferring with the bad block marker positions.
interfering with the bad block marker positions.
See bad block table support for details.
</para>
</sect2>
@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
nand_scan() calls the function nand_default_bbt().
nand_default_bbt() selects appropriate default
bad block table desriptors depending on the chip information
bad block table descriptors depending on the chip information
which was retrieved by nand_scan().
</para>
<para>
@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
It may be desired or necessary to keep a bad block table in FLASH.
For AG-AND chips this is mandatory, as they have no factory marked
bad blocks. They have factory marked good blocks. The marker pattern
is erased when the block is erased to be reused. So in case of
@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
of the blocks.
</para>
<para>
The blocks in which the tables are stored are procteted against
The blocks in which the tables are stored are protected against
accidental access by marking them bad in the memory bad block
table. The bad block table management functions are allowed
to circumvernt this protection.
to circumvent this protection.
</para>
<para>
The simplest way to activate the FLASH based bad block table support
@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
User defined tables are created by filling out a
nand_bbt_descr structure and storing the pointer in the
nand_chip structure member bbt_td before calling nand_scan().
If a mirror table is neccecary a second structure must be
If a mirror table is necessary a second structure must be
created and a pointer to this structure must be stored
in bbt_md inside the nand_chip structure. If the bbt_md
member is set to NULL then only the main table is used
@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
For automatic placement some blocks must be reserved for
bad block table storage. The number of reserved blocks is defined
in the maxblocks member of the babd block table description structure.
in the maxblocks member of the bad block table description structure.
Reserving 4 blocks for mirrored tables should be a reasonable number.
This also limits the number of blocks which are scanned for the bad
block table ident pattern.
@ -1068,11 +1068,11 @@ in this page</entry>
<chapter id="filesystems">
<title>Filesystem support</title>
<para>
The NAND driver provides all neccecary functions for a
The NAND driver provides all necessary functions for a
filesystem via the MTD interface.
</para>
<para>
Filesystems must be aware of the NAND pecularities and
Filesystems must be aware of the NAND peculiarities and
restrictions. One major restrictions of NAND Flash is, that you cannot
write as often as you want to a page. The consecutive writes to a page,
before erasing it again, are restricted to 1-3 writes, depending on the
@ -1222,7 +1222,7 @@ in this page</entry>
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
/* Write bbt if neccecary */
/* Write bbt if necessary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000

2
Documentation/DocBook/regulator.tmpl
View File

@ -155,7 +155,7 @@
release regulators. Functions are
provided to <link linkend='API-regulator-enable'>enable</link>
and <link linkend='API-regulator-disable'>disable</link> the
reguator and to get and set the runtime parameters of the
regulator and to get and set the runtime parameters of the
regulator.
</para>
<para>

4
Documentation/DocBook/uio-howto.tmpl
View File

@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
<para>
The dynamic memory regions will be allocated when the UIO device file,
<varname>/dev/uioX</varname> is opened.
Simiar to static memory resources, the memory region information for
Similar to static memory resources, the memory region information for
dynamic regions is then visible via sysfs at
<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
The dynmaic memory regions will be freed when the UIO device file is
The dynamic memory regions will be freed when the UIO device file is
closed. When no processes are holding the device file open, the address
returned to userspace is ~0.
</para>

2
Documentation/DocBook/usb.tmpl
View File

@ -153,7 +153,7 @@
<listitem><para>The Linux USB API supports synchronous calls for
control and bulk messages.
It also supports asynchnous calls for all kinds of data transfer,
It also supports asynchronous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>

2
Documentation/DocBook/writing-an-alsa-driver.tmpl
View File

@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
suspending the PCM operations via
<function>snd_pcm_suspend_all()</function> or
<function>snd_pcm_suspend()</function>. It means that the PCM
streams are already stoppped when the register snapshot is
streams are already stopped when the register snapshot is
taken. But, remember that you don't have to restart the PCM
stream in the resume callback. It'll be restarted via
trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>

6
Documentation/acpi/enumeration.txt
View File

@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and
configuring GPIOs it can get its ACPI handle and extract this information
from ACPI tables.
Currently the kernel is not able to automatically determine from which ACPI
device it should make the corresponding platform device so we need to add
the ACPI device explicitly to acpi_platform_device_ids list defined in
drivers/acpi/acpi_platform.c. This limitation is only for the platform
devices, SPI and I2C devices are created automatically as described below.
DMA support
~~~~~~~~~~~
DMA controllers enumerated via ACPI should be registered in the system to

7
Documentation/cpu-freq/intel-pstate.txt
View File

@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
/sys/devices/system/cpu/intel_pstate/
max_perf_pct: limits the maximum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the available performance. The
available (P states) performance may be reduced by the no_turbo
setting described below.
min_perf_pct: limits the minimum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the max (non-turbo)
performance level.
no_turbo: limits the driver to selecting P states below the turbo
frequency range.

20
Documentation/devicetree/bindings/arm/exynos/power_domain.txt
View File

@ -9,6 +9,18 @@ Required Properties:
- reg: physical base address of the controller and length of memory mapped
region.
Optional Properties:
- clocks: List of clock handles. The parent clocks of the input clocks to the
devices in this power domain are set to oscclk before power gating
and restored back after powering on a domain. This is required for
all domains which are powered on and off and not required for unused
domains.
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
Node of a device using power domains must have a samsung,power-domain property
defined with a phandle to respective power domain.
@ -19,6 +31,14 @@ Example:
reg = <0x10023C00 0x10>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
Example of the node using power domain:
node {

6
Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
View File

@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined
under node /cpus/cpu@0.
Required properties:
- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
for details
- None
Optional properties:
- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
details. OPPs *must* be supplied either via DT, i.e. this property, or
populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.

7
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
View File

@ -4,6 +4,13 @@ Required properties:
- compatible: Must contain one of the following:
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
- "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
- "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
- "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.

4
Documentation/devicetree/bindings/sound/ak5386.txt
View File

@ -10,10 +10,14 @@ Optional properties:
- reset-gpio : a GPIO spec for the reset/power down pin.
If specified, it will be deasserted at probe time.
- va-supply : a regulator spec, providing 5.0V
- vd-supply : a regulator spec, providing 3.3V
Example:
spdif: ak5386@0 {
compatible = "asahi-kasei,ak5386";
reset-gpio = <&gpio0 23>;
va-supply = <&vdd_5v0_reg>;
vd-supply = <&vdd_3v3_reg>;
};

29
Documentation/devicetree/bindings/sound/cs4265.txt Normal file
View File

@ -0,0 +1,29 @@
CS4265 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "cirrus,cs4265"
- reg : the I2C address of the device for I2C. The I2C address depends on
the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f.
If it is low, the i2c address is 0x4e.
Optional properties:
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the codec starts.
Examples:
codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
compatible = "cirrus,cs4265";
reg = <0x4f>;
};
codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
compatible = "cirrus,cs4265";
reg = <0x4e>;
};

60
Documentation/devicetree/bindings/sound/fsl,asrc.txt Normal file
View File

@ -0,0 +1,60 @@
Freescale Asynchronous Sample Rate Converter (ASRC) Controller
The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
signal associated with an input clock into a signal associated with a different
output clock. The driver currently works as a Front End of DPCM with other Back
Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
three substreams within totally 10 channels.
Required properties:
- compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
- reg : Offset and length of the register set for the device.
- interrupts : Contains the spdif interrupt.
- dmas : Generic dma devicetree binding as described in
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
- clocks : Contains an entry for each entry in clock-names.
- clock-names : Contains the following entries
"mem" Peripheral access clock to access registers.
"ipg" Peripheral clock to driver module.
"asrck_<0-f>" Clock sources for input and output clock.
- big-endian : If this property is absent, the little endian mode
will be in use as default. Otherwise, the big endian
mode will be in use for all the device registers.
- fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
Example:
asrc: asrc@02034000 {
compatible = "fsl,imx53-asrc";
reg = <0x02034000 0x4000>;
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 107>, <&clks 107>, <&clks 0>,
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
<&clks 107>, <&clks 0>, <&clks 0>;
clock-names = "mem", "ipg", "asrck0",
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
"asrck_d", "asrck_e", "asrck_f";
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};

2
Documentation/devicetree/bindings/sound/max98090.txt
View File

@ -4,7 +4,7 @@ This device supports I2C only.
Required properties:
- compatible : "maxim,max98090".
- compatible : "maxim,max98090" or "maxim,max98091".
- reg : The I2C address of the device.

9
Documentation/devicetree/bindings/sound/renesas,rsnd.txt
View File

@ -13,6 +13,9 @@ Required properties:
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
- rcar_sound,dvc : Should contain DVC feature.
The number of DVC subnode should be same as HW.
see below for detail.
- rcar_sound,dai : DAI contents.
The number of DAI subnode should be same as HW.
see below for detail.
@ -21,6 +24,7 @@ SSI subnode properties:
- interrupts : Should contain SSI interrupt for PIO transfer
- shared-pin : if shared clock pin
- pio-transfer : use PIO transfer mode
- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
SRC subnode properties:
no properties at this point
@ -39,6 +43,11 @@ rcar_sound: rcar_sound@0xffd90000 {
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x1280>; /* SSI */
rcar_sound,dvc {
dvc0: dvc@0 { };
dvc1: dvc@1 { };
};
rcar_sound,src {
src0: src@0 { };
src1: src@1 { };

37
Documentation/devicetree/bindings/sound/rockchip-i2s.txt Normal file
View File

@ -0,0 +1,37 @@
* Rockchip I2S controller
The I2S bus (Inter-IC sound bus) is a serial link for digital
audio data transfer between devices in the system.
Required properties:
- compatible: should be one of the followings
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
- #address-cells: should be 1.
- #size-cells: should be 0.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain followings:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
Example for rk3288 I2S controller:
i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
dmas = <&pdma1 0>, <&pdma1 1>;
dma-names = "rx", "tx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
};

35
Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt Normal file
View File

@ -0,0 +1,35 @@
Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
Required properties:
- compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
"samsung,odroidu3-audio" - for Odroid U3 board
- samsung,model : the user-visible name of this sound complex
- samsung,i2s-controller : the phandle of the I2S controller
- samsung,audio-codec : the phandle of the MAX98090 audio codec
- samsung,audio-routing : a list of the connections between audio
components; each entry is a pair of strings, the first being the
connection's sink, the second being the connection's source;
valid names for sources and sinks are the MAX98090's pins (as
documented in its binding), and the jacks on the board
For Odroid X2:
* Headphone Jack
* Mic Jack
* DMIC
For Odroid U3:
* Headphone Jack
* Speakers
Example:
sound {
compatible = "samsung,odroidu3-audio";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98090>;
samsung,model = "Odroid-X2";
samsung,audio-routing =
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"IN1", "Mic Jack",
"Mic Jack", "MICBIAS";
};

27
Documentation/devicetree/bindings/sound/sirf-usp.txt Normal file
View File

@ -0,0 +1,27 @@
* SiRF SoC USP module
Required properties:
- compatible: "sirf,prima2-usp-pcm"
- reg: Base address and size entries:
- dmas: List of DMA controller phandle and DMA request line ordered pairs.
- dma-names: Identifier string for each DMA request line in the dmas property.
These strings correspond 1:1 with the ordered pairs in dmas.
One of the DMA channels will be responsible for transmission (should be
named "tx") and one for reception (should be named "rx").
- clocks: USP controller clock source
- pinctrl-names: Must contain a "default" entry.
- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
Example:
usp0: usp@b0080000 {
compatible = "sirf,prima2-usp-pcm";
reg = <0xb0080000 0x10000>;
clocks = <&clks 28>;
dmas = <&dmac1 1>, <&dmac1 2>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&usp0_only_utfs_pins_a>;
};

5
Documentation/devicetree/bindings/sound/snow.txt
View File

@ -3,15 +3,20 @@ Audio Binding for Snow boards
Required properties:
- compatible : Can be one of the following,
"google,snow-audio-max98090" or
"google,snow-audio-max98091" or
"google,snow-audio-max98095"
- samsung,i2s-controller: The phandle of the Samsung I2S controller
- samsung,audio-codec: The phandle of the audio codec
Optional:
- samsung,model: The name of the sound-card
Example:
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};

26
Documentation/devicetree/bindings/sound/tas2552.txt Normal file
View File

@ -0,0 +1,26 @@
Texas Instruments - tas2552 Codec module
The tas2552 serial control bus communicates through I2C protocols
Required properties:
- compatible - One of:
"ti,tas2552" - TAS2552
- reg - I2C slave address
- supply-*: Required supply regulators are:
"vbat" battery voltage
"iovdd" I/O Voltage
"avdd" Analog DAC Voltage
Optional properties:
- enable-gpio - gpio pin to enable/disable the device
Example:
tas2552: tas2552@41 {
compatible = "ti,tas2552";
reg = <0x41>;
enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
};
For more product information please see the link below:
http://www.ti.com/product/TAS2552

5
Documentation/devicetree/bindings/sound/ti,tas5086.txt
View File

@ -31,6 +31,9 @@ Optional properties:
Most systems should not set any of these properties.
- avdd-supply: Power supply for AVDD, providing 3.3V
- dvdd-supply: Power supply for DVDD, providing 3.3V
Examples:
i2c_bus {
@ -39,5 +42,7 @@ Examples:
reg = <0x1b>;
reset-gpio = <&gpio 23 0>;
ti,charge-period = <156000>;
avdd-supply = <&vdd_3v3_reg>;
dvdd-supply = <&vdd_3v3_reg>;
};
};

33
Documentation/devicetree/bindings/sound/wm8904.txt Normal file
View File

@ -0,0 +1,33 @@
WM8904 audio CODEC
This device supports I2C only.
Required properties:
- compatible: "wlf,wm8904"
- reg: the I2C address of the device.
- clock-names: "mclk"
- clocks: reference to
<Documentation/devicetree/bindings/clock/clock-bindings.txt>
Pins on the device (for linking into audio routes):
* IN1L
* IN1R
* IN2L
* IN2R
* IN3L
* IN3R
* HPOUTL
* HPOUTR
* LINEOUTL
* LINEOUTR
* MICBIAS
Examples:
codec: wm8904@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck0>;
clock-names = "mclk";
};

13
Documentation/input/event-codes.txt
View File

@ -281,6 +281,19 @@ gestures can normally be extracted from it.
If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
device.
INPUT_PROP_TOPBUTTONPAD:
-----------------------
Some laptops, most notably the Lenovo *40 series provide a trackstick
device but do not have physical buttons associated with the trackstick
device. Instead, the top area of the touchpad is marked to show
visual/haptic areas for left, middle, right buttons intended to be used
with the trackstick.
If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons
accordingly. This property does not affect kernel behavior.
The kernel does not provide button emulation for such devices but treats
them as any other INPUT_PROP_BUTTONPAD device.
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.

8
Documentation/kernel-parameters.txt
View File

@ -2790,6 +2790,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
leaf rcu_node structure. Useful for very large
systems.
rcutree.jiffies_till_sched_qs= [KNL]
Set required age in jiffies for a
given grace period before RCU starts
soliciting quiescent-state help from
rcu_note_context_switch().
rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
first attempt to force quiescent states.
@ -3526,7 +3532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the allocated input device; If set to 0, video driver
will only send out the event without touching backlight
brightness level.
default: 0
default: 1
virtio_mmio.device=
[VMMIO] Memory mapped virtio (platform) device.

4
Documentation/laptops/00-INDEX
View File

@ -8,8 +8,8 @@ disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
hpfall.c
- (HP) laptop accelerometer program for disk protection.
freefall.c
- (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt

59
Documentation/laptops/hpfall.c → Documentation/laptops/freefall.c
View File

@ -1,7 +1,9 @@
/* Disk protection for HP machines.
/* Disk protection for HP/DELL machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@ucw.cz>
* Copyright 2012 Sonal Santan
* Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
*
* GPLv2.
*/
@ -18,24 +20,31 @@
#include <signal.h>
#include <sys/mman.h>
#include <sched.h>
#include <syslog.h>
char unload_heads_path[64];
static int noled;
static char unload_heads_path[64];
static char device_path[32];
static const char app_name[] = "FREE FALL";
int set_unload_heads_path(char *device)
static int set_unload_heads_path(char *device)
{
char devname[64];
if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
return -EINVAL;
strncpy(devname, device + 5, sizeof(devname));
strncpy(devname, device + 5, sizeof(devname) - 1);
strncpy(device_path, device, sizeof(device_path) - 1);
snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
"/sys/block/%s/device/unload_heads", devname);
return 0;
}
int valid_disk(void)
static int valid_disk(void)
{
int fd = open(unload_heads_path, O_RDONLY);
if (fd < 0) {
perror(unload_heads_path);
return 0;
@ -45,43 +54,54 @@ int valid_disk(void)
return 1;
}
void write_int(char *path, int i)
static void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
sprintf(buf, "%d", i);
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
close(fd);
}
void set_led(int on)
static void set_led(int on)
{
if (noled)
return;
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
void protect(int seconds)
static void protect(int seconds)
{
const char *str = (seconds == 0) ? "Unparked" : "Parked";
write_int(unload_heads_path, seconds*1000);
syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
}
int on_ac(void)
static int on_ac(void)
{
// /sys/class/power_supply/AC0/online
/* /sys/class/power_supply/AC0/online */
return 1;
}
int lid_open(void)
static int lid_open(void)
{
// /proc/acpi/button/lid/LID/state
/* /proc/acpi/button/lid/LID/state */
return 1;
}
void ignore_me(void)
static void ignore_me(int signum)
{
protect(0);
set_led(0);
@ -90,6 +110,7 @@ void ignore_me(void)
int main(int argc, char **argv)
{
int fd, ret;
struct stat st;
struct sched_param param;
if (argc == 1)
@ -111,7 +132,16 @@ int main(int argc, char **argv)
return EXIT_FAILURE;
}
daemon(0, 0);
if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
noled = 1;
if (daemon(0, 0) != 0) {
perror("daemon");
return EXIT_FAILURE;
}
openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
param.sched_priority = sched_get_priority_max(SCHED_FIFO);
sched_setscheduler(0, SCHED_FIFO, &param);
mlockall(MCL_CURRENT|MCL_FUTURE);
@ -141,6 +171,7 @@ int main(int argc, char **argv)
alarm(20);
}
closelog();
close(fd);
return EXIT_SUCCESS;
}

51
MAINTAINERS
View File

@ -156,7 +156,6 @@ F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
@ -1314,6 +1313,20 @@ W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/genmai_defconfig
F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
@ -4497,8 +4510,7 @@ S: Supported
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Alexander Aring <alex.aring@gmail.com>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
@ -6787,7 +6799,7 @@ F: arch/x86/kernel/quirks.c
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Shawn Guo <shawn.guo@linaro.org>
M: Shawn Guo <shawn.guo@freescale.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@ -6944,6 +6956,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pinctrl/pinctrl-at91.c
PIN CONTROLLER - RENESAS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-sh@vger.kernel.org
S: Maintained
F: drivers/pinctrl/sh-pfc/
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <t.figa@samsung.com>
M: Thomas Abraham <thomas.abraham@linaro.org>
@ -7406,7 +7424,7 @@ S: Orphan
F: drivers/net/wireless/ray*
RCUTORTURE MODULE
M: Josh Triplett <josh@freedesktop.org>
M: Josh Triplett <josh@joshtriplett.org>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
L: linux-kernel@vger.kernel.org
S: Supported
@ -7461,6 +7479,13 @@ F: drivers/rtc/
F: include/linux/rtc.h
F: include/uapi/linux/rtc.h
REALTEK AUDIO CODECS
M: Bard Liao <bardliao@realtek.com>
M: Oder Chiou <oder_chiou@realtek.com>
S: Maintained
F: sound/soc/codecs/rt*
F: include/sound/rt*.h
REISERFS FILE SYSTEM
L: reiserfs-devel@vger.kernel.org
S: Supported
@ -8007,6 +8032,16 @@ F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
SERIAL ATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
@ -8894,7 +8929,7 @@ M: Stephen Warren <swarren@wwwdotorg.org>
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-tegra/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
S: Supported
N: [^a-z]tegra
@ -8984,7 +9019,7 @@ F: drivers/media/radio/radio-raremono.c
THERMAL
M: Zhang Rui <rui.zhang@intel.com>
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@ -9011,7 +9046,7 @@ S: Maintained
F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/thermal/ti-soc-thermal/

103
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION =
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@ -41,6 +41,29 @@ unexport GREP_OPTIONS
# descending is started. They are now explicitly listed as the
# prepare rule.
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
@ -128,8 +174,11 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
# Fake the "Entering directory" message once, so that IDEs/editors are
# able to understand relative filenames.
echodir := @echo
quiet_echodir := @echo
silent_echodir := @:
sub-make: FORCE
@echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@ -292,52 +341,6 @@ endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
ifneq ($(CC),)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
@ -685,6 +688,8 @@ KBUILD_CFLAGS += -fomit-frame-pointer
endif
endif
KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
ifdef CONFIG_DEBUG_INFO
KBUILD_CFLAGS += -g
KBUILD_AFLAGS += -Wa,-gdwarf-2
@ -1173,7 +1178,7 @@ distclean: mrproper
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
package-dir := scripts/package
%src-pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@

5
arch/arm/Kconfig
View File

@ -6,6 +6,7 @@ config ARM
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
@ -312,7 +313,7 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_PATCH_PHYS_VIRT if MMU
select AUTO_ZRELADDR
select COMMON_CLK
select COMMON_CLK_VERSATILE
@ -658,7 +659,7 @@ config ARCH_MSM
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select ARM_PATCH_PHYS_VIRT if MMU
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP

4
arch/arm/boot/dts/am335x-evm.dts
View File

@ -529,8 +529,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tps {

4
arch/arm/boot/dts/am335x-evmsk.dts
View File

@ -560,8 +560,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tscadc {

6
arch/arm/boot/dts/am335x-igep0033.dtsi
View File

@ -105,10 +105,16 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&elm {

2
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -925,7 +925,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";

6
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -1045,6 +1045,8 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
ep0 {
@ -1122,6 +1124,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
clocks = <&pwm_clk>;
#pwm-cells = <3>;
status = "disabled";
};
@ -1153,8 +1156,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
<&uhpck>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};

1
arch/arm/boot/dts/dra7-evm.dts
View File

@ -240,6 +240,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};

10
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -673,10 +673,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
compatible = "ti,divider-clock";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
@ -684,7 +686,7 @@
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <1>;
clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {

2
arch/arm/boot/dts/exynos4.dtsi
View File

@ -554,7 +554,7 @@
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};

5
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -167,7 +167,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@ -260,6 +260,9 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
disp_pd: power-domain@100440C0 {

2
arch/arm/boot/dts/hi3620.dtsi
View File

@ -73,7 +73,7 @@
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xfc10000 0x100000>;
reg = <0x100000 0x100000>;
interrupts = <0 15 4>;
cache-unified;
cache-level = <2>;

2
arch/arm/boot/dts/omap3-n900.dts
View File

@ -353,7 +353,7 @@
};
twl_power: power {
compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
compatible = "ti,twl4030-power-n900";
ti,use_poweroff;
};
};

4
arch/arm/boot/dts/r8a7791.dtsi
View File

@ -540,9 +540,9 @@
#clock-cells = <0>;
clock-output-names = "sd1";
};
sd2_clk: sd3_clk@e615007c {
sd2_clk: sd3_clk@e615026c {
compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe615007c 0 4>;
reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd2";

2
arch/arm/boot/dts/ste-nomadik-s8815.dts
View File

@ -4,7 +4,7 @@
*/
/dts-v1/;
/include/ "ste-nomadik-stn8815.dtsi"
#include "ste-nomadik-stn8815.dtsi"
/ {
model = "Calao Systems USB-S8815";

7
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
View File

@ -1,7 +1,9 @@
/*
* Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
*/
/include/ "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
#address-cells = <1>;
@ -842,8 +844,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio3 15 0x1>;
cd-inverted;
cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;

10
arch/arm/crypto/aesbs-glue.c
View File

@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
dst += AES_BLOCK_SIZE;
} while (--blocks);
}
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
while (walk.nbytes) {
u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
dst += AES_BLOCK_SIZE;
src += AES_BLOCK_SIZE;
} while (--blocks);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->enc, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}

1
arch/arm/include/asm/mach/arch.h
View File

@ -50,6 +50,7 @@ struct machine_desc {
struct smp_operations *smp; /* SMP operations */
bool (*smp_init)(void);
void (*fixup)(struct tag *, char **);
void (*dt_fixup)(void);
void (*init_meminfo)(void);
void (*reserve)(void);/* reserve mem blocks */
void (*map_io)(void);/* IO mapping function */

8
arch/arm/kernel/devtree.c
View File

@ -212,7 +212,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
mdesc_best = &__mach_desc_GENERIC_DT;
#endif
if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
return NULL;
mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
@ -237,6 +237,12 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
dump_machine_table(); /* does not return */
}
/* We really don't want to do this, but sometimes firmware provides buggy data */
if (mdesc->dt_fixup)
mdesc->dt_fixup();
early_init_dt_scan_nodes();
/* Change machine number to match the mdesc we're using */
__machine_arch_type = mdesc->nr;

23
arch/arm/kernel/iwmmxt.S
View File

@ -94,13 +94,19 @@ ENTRY(iwmmxt_task_enable)
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
bl concan_save
teq r1, #0 @ test for last ownership
mov lr, r9 @ normal exit from exception
beq concan_load @ no owner, skip save
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
#endif
4: dec_preempt_count r10, r3
mov pc, r9 @ normal exit from exception
concan_save:
teq r1, #0 @ test for last ownership
beq concan_load @ no owner, skip save
tmrc r2, wCon
@ CUP? wCx
@ -138,7 +144,7 @@ concan_dump:
wstrd wR15, [r1, #MMX_WR15]
2: teq r0, #0 @ anything to load?
beq 3f
moveq pc, lr @ if not, return
concan_load:
@ -171,14 +177,9 @@ concan_load:
@ clear CUP/MUP (only if r1 != 0)
teq r1, #0
mov r2, #0
beq 3f
tmcr wCon, r2
moveq pc, lr
3:
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
#endif
4: dec_preempt_count r10, r3
tmcr wCon, r2
mov pc, lr
/*

4
arch/arm/kernel/kgdb.c
View File

@ -160,12 +160,16 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
static struct undef_hook kgdb_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_BREAKINST,
.cpsr_mask = MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = kgdb_brk_fn
};
static struct undef_hook kgdb_compiled_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_COMPILED_BREAK,
.cpsr_mask = MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = kgdb_compiled_brk_fn
};

28
arch/arm/kernel/kprobes-test-arm.c
View File

@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
TEST_R( op "eq r",11,VAL1,", #0xf5") \
TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
TEST_R( op " r",8, VAL2,", #0x000af000")
@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void)
TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
TEST( op "eq" s " r0, #0xf5") \
TEST( op "ne" s " r11, #0xf5000000") \
TEST( op s " r7, #0x000af000") \
@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void)
TEST_SUPPORTED("cmp pc, #0x1000");
TEST_SUPPORTED("cmp sp, #0x1000");
/* Data-processing with PC as shift*/
/* Data-processing with PC and a shift count in a register */
TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3")
/* Data-processing with PC as shift*/
/* Data-processing with PC as a target and status registers updated */
TEST_UNSUPPORTED("movs pc, r1")
TEST_UNSUPPORTED("movs pc, r1, lsl r2")
TEST_UNSUPPORTED("movs pc, #0x10000")
@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void)
TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1")
TEST_BB( "sub pc, pc, #1b-2b+8")
#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
TEST_R( "add pc, pc, r",10,-2,", asl #1")
#ifdef CONFIG_THUMB2_KERNEL
TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void)
TEST_BB_R("bx r",7,2f,"")
TEST_BF_R("bxeq r",14,2f,"")
#if __LINUX_ARM_ARCH__ >= 5
TEST_R("clz r0, r",0, 0x0,"")
TEST_R("clzeq r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
#endif
TEST_GROUP("Multiply and multiply-accumulate")
@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
#endif
#if __LINUX_ARM_ARCH__ >= 5
TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!")
TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48")
TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48")
#endif
TEST_GROUP("Miscellaneous")
@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void)
TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
#endif
TEST_UNSUPPORTED("svc 0")
TEST_UNSUPPORTED("svc 0xffffff")
@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void)
TEST( "blx __dummy_thumb_subroutine_odd")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
#endif
#if __LINUX_ARM_ARCH__ >= 6
COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
#endif

10
arch/arm/kernel/kprobes-test.c
View File

@ -225,6 +225,7 @@ static int pre_handler_called;
static int post_handler_called;
static int jprobe_func_called;
static int kretprobe_handler_called;
static int tests_failed;
#define FUNC_ARG1 0x12345678
#define FUNC_ARG2 0xabcdef
@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long))
pr_info(" jprobe\n");
ret = test_jprobe(func);
#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE)
if (ret == -EINVAL) {
pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n");
tests_failed = ret;
ret = 0;
}
#endif
if (ret < 0)
return ret;
@ -1671,6 +1679,8 @@ static int __init run_all_tests(void)
#endif
out:
if (ret == 0)
ret = tests_failed;
if (ret == 0)
pr_info("Finished kprobe tests OK\n");
else

6
arch/arm/kernel/probes-arm.c
View File

@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = {
/* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
/* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
REGS(ANY, 0, NOPC, 0, ANY)),
REGS(NOPC, 0, NOPC, 0, NOPC)),
/* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
/* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
REGS(0, ANY, NOPC, 0, ANY)),
REGS(0, NOPC, NOPC, 0, NOPC)),
/* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
/* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = {
/* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
/* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
REGS(ANY, ANY, NOPC, 0, ANY)),
REGS(NOPC, NOPC, NOPC, 0, NOPC)),
DECODE_END
};

2
arch/arm/kernel/topology.c
View File

@ -275,7 +275,7 @@ void store_cpu_topology(unsigned int cpuid)
cpu_topology[cpuid].socket_id, mpidr);
}
static inline const int cpu_corepower_flags(void)
static inline int cpu_corepower_flags(void)
{
return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN;
}

18
arch/arm/mach-exynos/exynos.c
View File

@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = {
void __init exynos_cpuidle_init(void)
{
if (soc_is_exynos5440())
return;
platform_device_register(&exynos_cpuidle);
if (soc_is_exynos4210() || soc_is_exynos5250())
platform_device_register(&exynos_cpuidle);
}
void __init exynos_cpufreq_init(void)
@ -297,7 +295,7 @@ static void __init exynos_dt_machine_init(void)
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
if (!IS_ENABLED(SMP))
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
exynos_cpuidle_init();
@ -337,6 +335,15 @@ static void __init exynos_reserve(void)
#endif
}
static void __init exynos_dt_fixup(void)
{
/*
* Some versions of uboot pass garbage entries in the memory node,
* use the old CONFIG_ARM_NR_BANKS
*/
of_fdt_limit_memory(8);
}
DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
@ -350,4 +357,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
.dt_compat = exynos_dt_compat,
.restart = exynos_restart,
.reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END

9
arch/arm/mach-exynos/firmware.c
View File

@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
boot_reg = sysram_ns_base_addr + 0x1c;
if (!soc_is_exynos4212() && !soc_is_exynos3250())
boot_reg += 4*cpu;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;

10
arch/arm/mach-exynos/hotplug.c
View File

@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
for (;;) {
/* make cpu1 to be turned off at next WFI command */
if (cpu == 1)
exynos_cpu_power_down(cpu);
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
wfi();
if (pen_release == cpu_logical_map(cpu)) {
if (pen_release == core_id) {
/*
* OK, proper wakeup, we're done
*/

34
arch/arm/mach-exynos/platsmp.c
View File

@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu)
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS;
/*
@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
* Note that "pen_release" is the hardware CPU ID, whereas
* Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID.
*/
write_pen_release(phys_cpu);
write_pen_release(core_id);
if (!exynos_cpu_power_state(cpu)) {
exynos_cpu_power_up(cpu);
if (!exynos_cpu_power_state(core_id)) {
exynos_cpu_power_up(core_id);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
while (exynos_cpu_power_state(core_id)
!= S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
goto fail;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg);
goto fail;
}
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
call_firmware_op(cpu_boot, phys_cpu);
call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
* boot register if it fails.
*/
for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr;
u32 mpidr;
u32 core_id;
int ret;
phys_cpu = cpu_logical_map(i);
mpidr = cpu_logical_map(i);
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
break;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg))
break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
}
}

61
arch/arm/mach-exynos/pm_domains.c
View File

@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_domain.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@ -24,6 +25,8 @@
#include "regs-pmu.h"
#define MAX_CLK_PER_DOMAIN 4
/*
* Exynos specific wrapper around the generic power domain
*/
@ -32,6 +35,9 @@ struct exynos_pm_domain {
char const *name;
bool is_off;
struct generic_pm_domain pd;
struct clk *oscclk;
struct clk *clk[MAX_CLK_PER_DOMAIN];
struct clk *pclk[MAX_CLK_PER_DOMAIN];
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
pd = container_of(domain, struct exynos_pm_domain, pd);
base = pd->base;
/* Set oscclk before powering off a domain*/
if (!power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->oscclk))
pr_err("%s: error setting oscclk as parent to clock %d\n",
pd->name, i);
}
}
pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
cpu_relax();
usleep_range(80, 100);
}
/* Restore clocks after powering on a domain*/
if (power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
pd->name, i);
}
}
return 0;
}
@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void)
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
int on;
int on, i;
struct device *dev;
pdev = of_find_device_by_node(np);
dev = &pdev->dev;
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void)
pd->pd.power_on = exynos_pd_power_on;
pd->pd.of_node = np;
pd->oscclk = clk_get(dev, "oscclk");
if (IS_ERR(pd->oscclk))
goto no_clk;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
char clk_name[8];
snprintf(clk_name, sizeof(clk_name), "clk%d", i);
pd->clk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->clk[i]))
break;
snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
pd->pclk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->pclk[i])) {
clk_put(pd->clk[i]);
pd->clk[i] = ERR_PTR(-EINVAL);
break;
}
}
if (IS_ERR(pd->clk[0]))
clk_put(pd->oscclk);
no_clk:
platform_set_drvdata(pdev, pd);
on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;

31
arch/arm/mach-imx/clk-gate2.c
View File

@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
spin_lock_irqsave(gate->lock, flags);
if (gate->share_count && --(*gate->share_count) > 0)
goto out;
if (gate->share_count) {
if (WARN_ON(*gate->share_count == 0))
goto out;
else if (--(*gate->share_count) > 0)
goto out;
}
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
@ -78,19 +82,26 @@ out:
spin_unlock_irqrestore(gate->lock, flags);
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
u32 reg;
struct clk_gate2 *gate = to_clk_gate2(hw);
u32 val = readl(reg);
reg = readl(gate->reg);
if (((reg >> gate->bit_idx) & 1) == 1)
if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
{
struct clk_gate2 *gate = to_clk_gate2(hw);
if (gate->share_count)
return !!(*gate->share_count);
else
return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
}
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
/* Initialize share_count per hardware state */
if (share_count)
*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;

4
arch/arm/mach-imx/clk-imx6q.c
View File

@ -70,7 +70,7 @@ static const char *cko_sels[] = { "cko1", "cko2", };
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
"pcie_ref", "sata_ref",
"pcie_ref_125m", "sata_ref_100m",
};
enum mx6q_clks {
@ -491,7 +491,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);

6
arch/arm/mach-mvebu/coherency.c
View File

@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static struct notifier_block mvebu_hwcc_pci_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
@ -427,7 +431,7 @@ static int __init coherency_pci_init(void)
{
if (coherency_available())
bus_register_notifier(&pci_bus_type,
&mvebu_hwcc_nb);
&mvebu_hwcc_pci_nb);
return 0;
}

9
arch/arm/mach-mvebu/headsmp-a9.S
View File

@ -15,6 +15,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
__CPUINIT
#define CPU_RESUME_ADDR_REG 0xf10182d4
@ -22,13 +24,18 @@
.global armada_375_smp_cpu1_enable_code_end
armada_375_smp_cpu1_enable_code_start:
ldr r0, [pc, #4]
ARM_BE8(setend be)
adr r0, 1f
ldr r0, [r0]
ldr r1, [r0]
ARM_BE8(rev r1, r1)
mov pc, r1
1:
.word CPU_RESUME_ADDR_REG
armada_375_smp_cpu1_enable_code_end:
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)

10
arch/arm/mach-mvebu/pmsu.c
View File

@ -201,12 +201,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, %0, c1, c0, 0 \n\t"
"tst %0, #(1 << 2) \n\t"
"orreq %0, %0, #(1 << 2) \n\t"
"mcreq p15, 0, %0, c1, c0, 0 \n\t"
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, #(1 << 2) \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
: : "r" (0));
: : : "r0");
pr_warn("Failed to suspend the system\n");

2
arch/arm/mach-omap2/clkt_dpll.c
View File

@ -76,7 +76,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;

3
arch/arm/mach-omap2/cm-regbits-34xx.h
View File

@ -26,11 +26,14 @@
#define OMAP3430_EN_WDT3_SHIFT 12
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4
#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4)
#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3
#define OMAP3430_EN_IVA2_DPLL_SHIFT 0
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0
#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_IVA2_CLK_SRC_SHIFT 19
#define OMAP3430_IVA2_CLK_SRC_WIDTH 3

3
arch/arm/mach-omap2/common.h
View File

@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_restart(enum reboot_mode mode, const char *cmd);
#else
static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)

28
arch/arm/mach-omap2/devices.c
View File

@ -297,33 +297,6 @@ static void omap_init_audio(void)
static inline void omap_init_audio(void) {}
#endif
#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
static struct platform_device omap_hdmi_audio = {
.name = "omap-hdmi-audio",
.id = -1,
};
static void __init omap_init_hdmi_audio(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("dss_hdmi");
if (!oh)
return;
pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
WARN(IS_ERR(pdev),
"Can't build omap_device for omap-hdmi-audio-dai.\n");
platform_device_register(&omap_hdmi_audio);
}
#else
static inline void omap_init_hdmi_audio(void) {}
#endif
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
@ -459,7 +432,6 @@ static int __init omap2_init_devices(void)
*/
omap_init_audio();
omap_init_camera();
omap_init_hdmi_audio();
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {

10
arch/arm/mach-omap2/dsp.c
View File

@ -29,6 +29,7 @@
#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
#include "soc.h"
#include <linux/platform_data/dsp-omap.h>
@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void)
phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
phys_addr_t paddr;
if (!cpu_is_omap34xx())
return;
if (!size)
return;
@ -83,6 +87,9 @@ static int __init omap_dsp_init(void)
int err = -ENOMEM;
struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
if (!cpu_is_omap34xx())
return 0;
pdata->phys_mempool_base = omap_dsp_get_mempool_base();
if (pdata->phys_mempool_base) {
@ -115,6 +122,9 @@ module_init(omap_dsp_init);
static void __exit omap_dsp_exit(void)
{
if (!cpu_is_omap34xx())
return;
platform_device_unregister(omap_dsp_pdev);
}
module_exit(omap_dsp_exit);

18
arch/arm/mach-omap2/gpmc-nand.c
View File

@ -50,6 +50,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
soc_is_omap54xx() || soc_is_dra7xx())
return 1;
if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
if (cpu_is_omap24xx())
return 0;
else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
return 0;
else
return 1;
}
/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
* which require H/W based ECC error detection */
if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
@ -57,14 +67,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
(ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
return 0;
/*
* For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
* and AM33xx derivates. Other chips may be added if confirmed to work.
*/
if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
(!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
return 0;
/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
return 1;

2
arch/arm/mach-omap2/gpmc.c
View File

@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
for_each_child_of_node(pdev->dev.of_node, child) {
for_each_available_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;

4
arch/arm/mach-omap2/omap4-common.c
View File

@ -168,6 +168,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
break;
case L310_POWER_CTRL:
pr_info_once("OMAP L2C310: ROM does not support power control setting\n");
return;
default:
WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
return;

18
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
};
/* sata */
static struct omap_hwmod_opt_clk sata_opt_clks[] = {
{ .role = "ref_clk", .clk = "sata_ref_clk" },
};
static struct omap_hwmod dra7xx_sata_hwmod = {
.name = "sata",
@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
.clkdm_name = "l3init_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "func_48m_fclk",
.mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = sata_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(sata_opt_clks),
};
/*
@ -1731,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = {
*
*/
static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SIDLEMODE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
.name = "usb_otg_ss",
.sysc = &dra7xx_usb_otg_ss_sysc,
};
/* usb_otg_ss1 */

6
arch/arm/mach-omap2/prm-regbits-34xx.h
View File

@ -35,6 +35,8 @@
#define OMAP3430_LOGICSTATEST_MASK (1 << 2)
#define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2)
#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0)
#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10)
#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9)
#define OMAP3630_GRPSEL_UART4_MASK (1 << 18)
#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
@ -42,6 +44,10 @@
#define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14)
#define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13)
#define OMAP3430_GRPSEL_UART3_MASK (1 << 11)
#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9)
#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8)
#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7)
#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6)
#define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2)
#define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1)
#define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0)

4
arch/arm/mach-shmobile/board-armadillo800eva.c
View File

@ -998,6 +998,8 @@ static struct platform_device fsi_wm8978_device = {
.id = 0,
.dev = {
.platform_data = &fsi_wm8978_info,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
},
};
@ -1021,6 +1023,8 @@ static struct platform_device fsi_hdmi_device = {
.id = 1,
.dev = {
.platform_data = &fsi2_hdmi_info,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
},
};

2
arch/arm/mach-shmobile/board-kzm9g.c
View File

@ -603,6 +603,8 @@ static struct platform_device fsi_ak4648_device = {
.name = "asoc-simple-card",
.dev = {
.platform_data = &fsi2_ak4648_info,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
},
};

4
arch/arm/mach-shmobile/board-mackerel.c
View File

@ -523,6 +523,8 @@ static struct platform_device fsi_hdmi_device = {
.id = 1,
.dev = {
.platform_data = &fsi2_hdmi_info,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
},
};
@ -919,6 +921,8 @@ static struct platform_device fsi_ak4643_device = {
.name = "asoc-simple-card",
.dev = {
.platform_data = &fsi2_ak4643_info,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask,
},
};

2
arch/arm/mm/cache-l2x0.c
View File

@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
if (rev >= L310_CACHE_ID_RTL_R2P0) {

11
arch/arm/mm/dma-mapping.c
View File

@ -461,12 +461,21 @@ void __init dma_contiguous_remap(void)
map.type = MT_MEMORY_DMA_READY;
/*
* Clear previous low-memory mapping
* Clear previous low-memory mapping to ensure that the
* TLB does not see any conflicting entries, then flush
* the TLB of the old entries before creating new mappings.
*
* This ensures that any speculatively loaded TLB entries
* (even though they may be rare) can not cause any problems,
* and ensures that this code is architecturally compliant.
*/
for (addr = __phys_to_virt(start); addr < __phys_to_virt(end);
addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
flush_tlb_kernel_range(__phys_to_virt(start),
__phys_to_virt(end));
iotable_init(&map, 1);
}
}

12
arch/arm/mm/idmap.c
View File

@ -9,6 +9,11 @@
#include <asm/sections.h>
#include <asm/system_info.h>
/*
* Note: accesses outside of the kernel image and the identity map area
* are not supported on any CPU using the idmap tables as its current
* page tables.
*/
pgd_t *idmap_pgd;
phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
@ -25,6 +30,13 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
pr_warning("Failed to allocate identity pmd.\n");
return;
}
/*
* Copy the original PMD to ensure that the PMD entries for
* the kernel image are preserved.
*/
if (!pud_none(*pud))
memcpy(pmd, pmd_offset(pud, 0),
PTRS_PER_PMD * sizeof(pmd_t));
pud_populate(&init_mm, pud, pmd);
pmd += pmd_index(addr);
} else

6
arch/arm/mm/mmu.c
View File

@ -1406,8 +1406,8 @@ void __init early_paging_init(const struct machine_desc *mdesc,
return;
/* remap kernel code and data */
map_start = init_mm.start_code;
map_end = init_mm.brk;
map_start = init_mm.start_code & PMD_MASK;
map_end = ALIGN(init_mm.brk, PMD_SIZE);
/* get a handle on things... */
pgd0 = pgd_offset_k(0);
@ -1442,7 +1442,7 @@ void __init early_paging_init(const struct machine_desc *mdesc,
}
/* remap pmds for kernel mapping */
phys = __pa(map_start) & PMD_MASK;
phys = __pa(map_start);
do {
*pmdk++ = __pmd(phys | pmdprot);
phys += PMD_SIZE;

5
arch/arm/xen/grant-table.c
View File

@ -51,3 +51,8 @@ int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
{
return -ENOSYS;
}
int arch_gnttab_init(unsigned long nr_shared, unsigned long nr_status)
{
return 0;
}

1
arch/arm64/Kconfig
View File

@ -4,6 +4,7 @@ config ARM64
select ARCH_HAS_OPP
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select ARCH_WANT_FRAME_POINTERS

12
arch/arm64/crypto/aes-glue.c
View File

@ -106,7 +106,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_enc, rounds, blocks, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -128,7 +128,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_dec, rounds, blocks, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -151,7 +151,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_enc, rounds, blocks, walk.iv,
first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -174,7 +174,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_dec, rounds, blocks, walk.iv,
first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -243,7 +243,7 @@ static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key1.key_enc, rounds, blocks,
(u8 *)ctx->key2.key_enc, walk.iv, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
@ -267,7 +267,7 @@ static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key1.key_dec, rounds, blocks,
(u8 *)ctx->key2.key_enc, walk.iv, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();

2
arch/arm64/include/asm/memory.h
View File

@ -56,6 +56,8 @@
#define TASK_SIZE_32 UL(0x100000000)
#define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \
TASK_SIZE_32 : TASK_SIZE_64)
#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
TASK_SIZE_32 : TASK_SIZE_64)
#else
#define TASK_SIZE TASK_SIZE_64
#endif /* CONFIG_COMPAT */

2
arch/arm64/kernel/efi-stub.c
View File

@ -12,8 +12,6 @@
#include <linux/efi.h>
#include <linux/libfdt.h>
#include <asm/sections.h>
#include <generated/compile.h>
#include <generated/utsrelease.h>
/*
* AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from

2
arch/arm64/mm/copypage.c
View File

@ -27,8 +27,10 @@ void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
copy_page(kto, kfrom);
__flush_dcache_area(kto, PAGE_SIZE);
}
EXPORT_SYMBOL_GPL(__cpu_copy_user_page);
void __cpu_clear_user_page(void *kaddr, unsigned long vaddr)
{
clear_page(kaddr);
}
EXPORT_SYMBOL_GPL(__cpu_clear_user_page);

17
arch/arm64/mm/init.c
View File

@ -60,6 +60,17 @@ static int __init early_initrd(char *p)
early_param("initrd", early_initrd);
#endif
/*
* Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
* currently assumes that for memory starting above 4G, 32-bit devices will
* use a DMA offset.
*/
static phys_addr_t max_zone_dma_phys(void)
{
phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
return min(offset + (1ULL << 32), memblock_end_of_DRAM());
}
static void __init zone_sizes_init(unsigned long min, unsigned long max)
{
struct memblock_region *reg;
@ -70,9 +81,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA)) {
unsigned long max_dma_phys =
(unsigned long)(dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1);
max_dma = max(min, min(max, max_dma_phys >> PAGE_SHIFT));
max_dma = PFN_DOWN(max_zone_dma_phys());
zone_size[ZONE_DMA] = max_dma - min;
}
zone_size[ZONE_NORMAL] = max - max_dma;
@ -146,7 +155,7 @@ void __init arm64_memblock_init(void)
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
dma_phys_limit = dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1;
dma_phys_limit = max_zone_dma_phys();
dma_contiguous_reserve(dma_phys_limit);
memblock_allow_resize();

2
arch/blackfin/configs/BF609-EZKIT_defconfig
View File

@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
CONFIG_SPI_BFIN_V3=y
CONFIG_SPI_ADI_V3=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set

2
arch/blackfin/kernel/vmlinux.lds.S
View File

@ -145,7 +145,7 @@ SECTIONS
.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
#else
.init.data : AT(__data_lma + __data_len)
.init.data : AT(__data_lma + __data_len + 32)
{
__sinitdata = .;
INIT_DATA

1
arch/blackfin/mach-bf533/boards/blackstamp.c
View File

@ -20,6 +20,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>

1
arch/blackfin/mach-bf537/boards/cm_bf537e.c
View File

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

1
arch/blackfin/mach-bf537/boards/cm_bf537u.c
View File

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

1
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View File

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

Some files were not shown because too many files have changed in this diff Show More