hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

This commit is contained in:
David S. Miller 2008-07-29 21:51:00 -07:00
parent 6e86841d05 56a6d13dfd
commit e93dc4891d
46 changed files with 675 additions and 406 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Documentation/rfkill.txt
View File

@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
rfkill input line is active. Only if none of the rfkill input lines are
active, will it return RFKILL_STATE_UNBLOCKED.
If it doesn't implement the get_state() hook, it must make sure that its calls
to rfkill_force_state() are enough to keep the status always up-to-date, and it
must do a rfkill_force_state() on resume from sleep.
Since the device has a hardware rfkill line, it IS subject to state changes
external to rfkill. Therefore, the driver must make sure that it calls
rfkill_force_state() to keep the status always up-to-date, and it must do a
rfkill_force_state() on resume from sleep.
Every time the driver gets a notification from the card that one of its rfkill
lines changed state (polling might be needed on badly designed cards that don't
@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried
about its current state).
The rfkill class will call the get_state hook of a device every time it needs
to know the *real* current state of the hardware. This can happen often.
to know the *real* current state of the hardware. This can happen often, but
it does not do any polling, so it is not enough on hardware that is subject
to state changes outside of the rfkill subsystem.
Therefore, calling rfkill_force_state() when a state change happens is
mandatory when the device has a hardware rfkill line, or when something else
like the firmware could cause its state to be changed without going through the
rfkill class.
Some hardware provides events when its status changes. In these cases, it is
best for the driver to not provide a get_state hook, and instead register the
rfkill class *already* with the correct status, and keep it updated using
rfkill_force_state() when it gets an event from the hardware.
rfkill_force_state() must be used on the device resume handlers to update the
rfkill status, should there be any chance of the device status changing during
the sleep.
There is no provision for a statically-allocated rfkill struct. You must
use rfkill_allocate() to allocate one.

12
drivers/net/ps3_gelic_wireless.c
View File

@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev,
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
__u16 flags;
unsigned int irqflag;
unsigned long irqflag;
int key_index, index_specified;
int ret = 0;
@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev,
{
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
unsigned int irqflag;
unsigned long irqflag;
unsigned int key_index, index_specified;
int ret = 0;
@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
__u16 alg;
__u16 flags;
unsigned int irqflag;
unsigned long irqflag;
int key_index;
int ret = 0;
@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev,
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
unsigned int irqflag;
unsigned long irqflag;
int key_index;
int ret = 0;
int max_key_len;
@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev,
{
struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
unsigned int len;
unsigned int irqflag;
unsigned long irqflag;
int ret = 0;
pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev,
{
struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
char *p;
unsigned int irqflag;
unsigned long irqflag;
unsigned int i;
pr_debug("%s:<-\n", __func__);

99
drivers/net/wireless/ath5k/base.c
View File

@ -43,7 +43,9 @@
#include <linux/version.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/if.h>
#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/cache.h>
#include <linux/pci.h>
@ -471,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev,
/* Set private data */
pci_set_drvdata(pdev, hw);
/* Enable msi for devices that support it */
pci_enable_msi(pdev);
/* Setup interrupt handler */
ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (ret) {
@ -551,7 +550,6 @@ err_ah:
err_irq:
free_irq(pdev->irq, sc);
err_free:
pci_disable_msi(pdev);
ieee80211_free_hw(hw);
err_map:
pci_iounmap(pdev, mem);
@ -573,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev)
ath5k_detach(pdev, hw);
ath5k_hw_detach(sc->ah);
free_irq(pdev->irq, sc);
pci_disable_msi(pdev);
pci_iounmap(pdev, sc->iobase);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
@ -590,6 +587,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
ath5k_led_off(sc);
ath5k_stop_hw(sc);
free_irq(pdev->irq, sc);
pci_disable_msi(pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@ -605,15 +605,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
struct ath5k_hw *ah = sc->ah;
int i, err;
err = pci_set_power_state(pdev, PCI_D0);
if (err)
return err;
pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err)
return err;
pci_restore_state(pdev);
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep
@ -621,7 +618,17 @@ ath5k_pci_resume(struct pci_dev *pdev)
*/
pci_write_config_byte(pdev, 0x41, 0);
ath5k_init(sc);
pci_enable_msi(pdev);
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (err) {
ATH5K_ERR(sc, "request_irq failed\n");
goto err_msi;
}
err = ath5k_init(sc);
if (err)
goto err_irq;
ath5k_led_enable(sc);
/*
@ -635,6 +642,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
ath5k_hw_reset_key(ah, i);
return 0;
err_irq:
free_irq(pdev->irq, sc);
err_msi:
pci_disable_msi(pdev);
pci_disable_device(pdev);
return err;
}
#endif /* CONFIG_PM */
@ -1224,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
pktlen = skb->len;
if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
if (info->control.hw_key) {
keyidx = info->control.hw_key->hw_key_idx;
pktlen += info->control.icv_len;
}
@ -1249,6 +1262,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
txq->link = &ds->ds_link;
ath5k_hw_tx_start(ah, txq->qnum);
mmiowb();
spin_unlock_bh(&txq->lock);
return 0;
@ -1583,7 +1597,6 @@ ath5k_rx_stop(struct ath5k_softc *sc)
ath5k_hw_stop_pcu_recv(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
mdelay(3); /* 3ms is long enough for 1 frame */
ath5k_debug_printrxbuffs(sc, ah);
@ -1682,31 +1695,44 @@ ath5k_tasklet_rx(unsigned long data)
struct ath5k_rx_status rs = {};
struct sk_buff *skb;
struct ath5k_softc *sc = (void *)data;
struct ath5k_buf *bf;
struct ath5k_buf *bf, *bf_last;
struct ath5k_desc *ds;
int ret;
int hdrlen;
int pad;
spin_lock(&sc->rxbuflock);
if (list_empty(&sc->rxbuf)) {
ATH5K_WARN(sc, "empty rx buf pool\n");
goto unlock;
}
bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
do {
rxs.flag = 0;
if (unlikely(list_empty(&sc->rxbuf))) {
ATH5K_WARN(sc, "empty rx buf pool\n");
break;
}
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
BUG_ON(bf->skb == NULL);
skb = bf->skb;
ds = bf->desc;
/* TODO only one segment */
pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
sc->desc_len, PCI_DMA_FROMDEVICE);
if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
break;
/*
* last buffer must not be freed to ensure proper hardware
* function. When the hardware finishes also a packet next to
* it, we are sure, it doesn't use it anymore and we can go on.
*/
if (bf_last == bf)
bf->flags |= 1;
if (bf->flags) {
struct ath5k_buf *bf_next = list_entry(bf->list.next,
struct ath5k_buf, list);
ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
&rs);
if (ret)
break;
bf->flags &= ~1;
/* skip the overwritten one (even status is martian) */
goto next;
}
ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
if (unlikely(ret == -EINPROGRESS))
@ -1752,8 +1778,6 @@ ath5k_tasklet_rx(unsigned long data)
goto next;
}
accept:
pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
rs.rs_datalen, PCI_DMA_FROMDEVICE);
pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
PCI_DMA_FROMDEVICE);
bf->skb = NULL;
@ -1816,6 +1840,7 @@ accept:
next:
list_move_tail(&bf->list, &sc->rxbuf);
} while (ath5k_rxbuf_setup(sc, bf) == 0);
unlock:
spin_unlock(&sc->rxbuflock);
}
@ -1840,9 +1865,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
ds = bf->desc;
/* TODO only one segment */
pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
sc->desc_len, PCI_DMA_FROMDEVICE);
ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
if (unlikely(ret == -EINPROGRESS))
break;
@ -2015,8 +2037,6 @@ ath5k_beacon_send(struct ath5k_softc *sc)
ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
/* NB: hw still stops DMA, so proceed */
}
pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
PCI_DMA_TODEVICE);
ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
ath5k_hw_tx_start(ah, sc->bhalq);
@ -2240,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc)
ret = 0;
done:
mmiowb();
mutex_unlock(&sc->lock);
return ret;
}
@ -2272,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
ath5k_led_off(sc);
ath5k_hw_set_intr(ah, 0);
synchronize_irq(sc->pdev->irq);
}
ath5k_txq_cleanup(sc);
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@ -2321,9 +2343,13 @@ ath5k_stop_hw(struct ath5k_softc *sc)
}
}
ath5k_txbuf_free(sc, sc->bbuf);
mmiowb();
mutex_unlock(&sc->lock);
del_timer_sync(&sc->calib_tim);
tasklet_kill(&sc->rxtq);
tasklet_kill(&sc->txtq);
tasklet_kill(&sc->restq);
return ret;
}
@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc)
struct pci_dev *pdev = sc->pdev;
char name[ATH5K_LED_MAX_NAME_LEN + 1];
sc->led_on = 0; /* active low */
/*
* Auto-enable soft led processing for IBM cards and for
* 5211 minipci cards.
@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
__set_bit(ATH_STAT_LEDSOFT, sc->status);
sc->led_pin = 0;
sc->led_on = 0; /* active low */
}
/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
__set_bit(ATH_STAT_LEDSOFT, sc->status);
sc->led_pin = 1;
sc->led_on = 1; /* active high */
}
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
goto out;
@ -2783,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
* a clean way of letting us retrieve this yet. */
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
mmiowb();
}
if (conf->changed & IEEE80211_IFCC_BEACON &&
@ -2971,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
}
unlock:
mmiowb();
mutex_unlock(&sc->lock);
return ret;
}
@ -3032,8 +3060,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
mutex_lock(&sc->lock);
if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
ret = -EIO;
goto end;
@ -3044,11 +3070,12 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
ret = ath5k_beacon_setup(sc, sc->bbuf);
if (ret)
sc->bbuf->skb = NULL;
else
else {
ath5k_beacon_config(sc);
mmiowb();
}
end:
mutex_unlock(&sc->lock);
return ret;
}

2
drivers/net/wireless/ath5k/base.h
View File

@ -56,7 +56,7 @@
struct ath5k_buf {
struct list_head list;
unsigned int flags; /* tx descriptor flags */
unsigned int flags; /* rx descriptor flags */
struct ath5k_desc *desc; /* virtual addr of desc */
dma_addr_t daddr; /* physical addr of desc */
struct sk_buff *skb; /* skbuff for buf */

4
drivers/net/wireless/ath5k/hw.c
View File

@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
/* Stop queue */
ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
ath5k_hw_reg_read(ah, AR5K_CR);
} else {
/*
* Schedule TX disable and wait until queue is empty
@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
/* Clear register */
ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
if (pending)
return -EBUSY;
}
/* TODO: Check for success else return error */
@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
/* ..re-enable interrupts */
ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
ath5k_hw_reg_read(ah, AR5K_IER);
return old_mask;
}

3
drivers/net/wireless/b43/main.c
View File

@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev)
}
/* fill hw info */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;

2
drivers/net/wireless/b43/xmit.c
View File

@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
const struct b43_phy *phy = &dev->phy;
const struct ieee80211_hdr *wlhdr =
(const struct ieee80211_hdr *)fragment_data;
int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
int use_encryption = !!info->control.hw_key;
__le16 fctl = wlhdr->frame_control;
struct ieee80211_rate *fbrate;
u8 rate, rate_fb;

5
drivers/net/wireless/b43legacy/main.c
View File

@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
}
/* fill hw info */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->queues = 1; /* FIXME: hardware has more queues */
@ -3846,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev)
goto out;
}
}
mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Device resumed.\n");
out:
mutex_unlock(&wl->mutex);
return err;
}

2
drivers/net/wireless/b43legacy/xmit.c
View File

@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
u16 cookie)
{
const struct ieee80211_hdr *wlhdr;
int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
int use_encryption = !!info->control.hw_key;
u16 fctl;
u8 rate;
struct ieee80211_rate *rate_fb;

3
drivers/net/wireless/ipw2100.c
View File

@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev)
if (err) {
printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
dev->name);
mutex_unlock(&priv->action_mutex);
return err;
}
pci_restore_state(pci_dev);
@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
if (err) {
IPW_DEBUG_WX("failed querying ordinals.\n");
return err;
goto done;
}
switch (val & TX_RATE_MASK) {

2
drivers/net/wireless/iwlwifi/iwl-3945.c
View File

@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
struct ieee80211_rx_status *stats)
{
struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
#ifdef CONFIG_IWL3945_LEDS
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
#endif
struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
short len = le16_to_cpu(rx_hdr->len);

3
drivers/net/wireless/iwlwifi/iwl-core.c
View File

@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
hw->rate_control_algorithm = "iwl-4965-rs";
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_SIGNAL_DBM |
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;

8
drivers/net/wireless/iwlwifi/iwl-debug.h
View File

@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv);
#endif
#else
static inline void IWL_DEBUG(int level, const char *fmt, ...)
{
}
static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
{
}
#define IWL_DEBUG(level, fmt, args...)
#define IWL_DEBUG_LIMIT(level, fmt, args...)
#endif /* CONFIG_IWLWIFI_DEBUG */

4
drivers/net/wireless/iwlwifi/iwl-led.c
View File

@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
if (tpt < 0) /* wrapparound */
tpt = -tpt;
IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
(long long)tpt,
(unsigned long long)current_tpt);
priv->led_tpt = current_tpt;
if (!priv->allow_blinking)

2
drivers/net/wireless/iwlwifi/iwl-scan.c
View File

@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
scan_notif->scanned_channels,
scan_notif->tsf_low,
scan_notif->tsf_high, scan_notif->status);
#endif
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &priv->status);

2
drivers/net/wireless/iwlwifi/iwl-tx.c
View File

@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
* first entry */
iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
if (info->control.hw_key)
iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
/* Set up TFD's 2nd entry to point directly to remainder of skb,

5
drivers/net/wireless/iwlwifi/iwl3945-base.c
View File

@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
* first entry */
iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
if (info->control.hw_key)
iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
priv->ibss_beacon = NULL;
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_SIGNAL_DBM |
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
/* 4 EDCA QOS priorities */

30
drivers/net/wireless/libertas/persistcfg.c
View File

@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev,
if (ret)
return ret;
return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
}
/**
@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%x", &datum);
if (ret != 1)
ret = sscanf(buf, "%d", &datum);
if ((ret != 1) || (datum > 1))
return -EINVAL;
*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev,
if (ret)
return ret;
return snprintf(buf, 12, "0x%x\n", defs.boottime);
return snprintf(buf, 12, "%d\n", defs.boottime);
}
/**
@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev,
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%x", &datum);
if (ret != 1)
ret = sscanf(buf, "%d", &datum);
if ((ret != 1) || (datum > 255))
return -EINVAL;
/* A too small boot time will result in the device booting into
@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev,
if (ret)
return ret;
return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
}
/**
@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
{
struct lbs_private *priv = to_net_dev(dev)->priv;
struct cmd_ds_mesh_config cmd;
uint16_t datum;
uint32_t datum;
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%hx", &datum);
ret = sscanf(buf, "%d", &datum);
if (ret != 1 || datum < 1 || datum > 11)
return -EINVAL;
@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev,
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%x", &datum);
if (ret != 1)
ret = sscanf(buf, "%d", &datum);
if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */
@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%x", &datum);
if (ret != 1)
ret = sscanf(buf, "%d", &datum);
if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */
@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
int ret;
memset(&cmd, 0, sizeof(cmd));
ret = sscanf(buf, "%x", &datum);
if (ret != 1)
ret = sscanf(buf, "%d", &datum);
if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */

2
drivers/net/wireless/mac80211_hwsim.c
View File

@ -500,7 +500,7 @@ failed_hw:
device_unregister(data->dev);
failed_drvdata:
ieee80211_free_hw(hw);
hwsim_radios[i] = 0;
hwsim_radios[i] = NULL;
failed:
mac80211_hwsim_free();
return err;

13
drivers/net/wireless/rt2x00/rt2500usb.c
View File

@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
int pipe = usb_sndbulkpipe(usb_dev, 1);
int length;
u16 reg;
u32 word, len;
/*
* Add the descriptor in front of the skb.
@ -1129,6 +1130,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
skbdesc->desc = entry->skb->data;
/*
* Adjust the beacon databyte count. The current number is
* calculated before this function gets called, but falsely
* assumes that the descriptor was already present in the SKB.
*/
rt2x00_desc_read(skbdesc->desc, 0, &word);
len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
len += skbdesc->desc_len;
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
rt2x00_desc_write(skbdesc->desc, 0, word);
/*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;

6
drivers/net/wireless/rt2x00/rt2x00.h
View File

@ -108,7 +108,10 @@
#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
#define DIFS ( PIFS + SLOT_TIME )
#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
#define EIFS ( SIFS + DIFS + \
(8 * (IEEE80211_HEADER + ACK_SIZE)) )
#define SHORT_EIFS ( SIFS + SHORT_DIFS + \
(8 * (IEEE80211_HEADER + ACK_SIZE)) )
/*
* Chipset identification
@ -597,6 +600,7 @@ enum rt2x00_flags {
DEVICE_STARTED_SUSPEND,
DEVICE_ENABLED_RADIO,
DEVICE_DISABLED_RADIO_HW,
DEVICE_DIRTY_CONFIG,
/*
* Driver features

2
drivers/net/wireless/rt2x00/rt2x00config.c
View File

@ -271,7 +271,7 @@ config:
libconf.sifs = SIFS;
libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
libconf.eifs = EIFS;
libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
}
libconf.conf = conf;

7
drivers/net/wireless/rt2x00/rt2x00dev.c
View File

@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
rt2x00dev->intf_associated = 0;
__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
__set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
return 0;
}
@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reconfigure device.
*/
rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
if (!rt2x00dev->hw->conf.radio_enabled)
rt2x00lib_disable_radio(rt2x00dev);
retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
if (retval)
goto exit;
/*
* Iterator over each active interface to

7
drivers/net/wireless/rt2x00/rt2x00lib.h
View File

@ -124,13 +124,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
*/
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_free_skb - free a skb
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to free.
*/
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send

29
drivers/net/wireless/rt2x00/rt2x00mac.c
View File

@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
(struct ieee80211_rts *)(skb->data));
if (rt2x00queue_write_tx_frame(queue, skb)) {
dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
enum data_queue_qid qid = skb_get_queue_mapping(skb);
struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct data_queue *queue;
u16 frame_control;
@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
}
}
/*
* XXX: This is as wrong as the old mac80211 code was,
* due to beacons not getting sequence numbers assigned
* properly.
*/
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
intf->seqno += 0x10;
ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
}
if (rt2x00queue_write_tx_frame(queue, skb)) {
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_BUSY;
@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
int force_reconfig;
/*
* Mac80211 might be calling this function while we are trying
@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
}
rt2x00lib_config(rt2x00dev, conf, 0);
/*
* When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
* been started and the configuration must be forced upon the hardware.
* Otherwise registers will not be intialized correctly and could
* result in non-working hardware because essential registers aren't
* initialized.
*/
force_reconfig =
__test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
rt2x00lib_config(rt2x00dev, conf, force_reconfig);
/*
* Reenable RX only if the radio should be on.

36
drivers/net/wireless/rt2x00/rt2x00queue.c
View File

@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
struct ieee80211_rate *rate =
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@ -199,6 +200,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
txdesc->ifs = IFS_SIFS;
}
/*
* Hardware should insert sequence counter.
* FIXME: We insert a software sequence counter first for
* hardware that doesn't support hardware sequence counting.
*
* This is wrong because beacons are not getting sequence
* numbers assigned properly.
*
* A secondary problem exists for drivers that cannot toggle
* sequence counting per-frame, since those will override the
* sequence counter given by mac80211.
*/
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
spin_lock(&intf->lock);
if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
intf->seqno += 0x10;
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
spin_unlock(&intf->lock);
__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
}
/*
* PLCP setup
* Length calculation depends on OFDM/CCK rate.
@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
if (!rt2x00dev->ops->lib->init_rxentry)
return;
for (i = 0; i < queue->limit; i++)
for (i = 0; i < queue->limit; i++) {
queue->entries[i].flags = 0;
rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
&queue->entries[i]);
}
}
void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
if (!rt2x00dev->ops->lib->init_txentry)
continue;
for (i = 0; i < queue->limit; i++)
for (i = 0; i < queue->limit; i++) {
queue->entries[i].flags = 0;
rt2x00dev->ops->lib->init_txentry(rt2x00dev,
&queue->entries[i]);
}
}
}

2
drivers/net/wireless/rt2x00/rt2x00queue.h
View File

@ -199,6 +199,7 @@ struct txdone_entry_desc {
* @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
* @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
* @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
* @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
* @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
* @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
* @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@ -210,6 +211,7 @@ enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
ENTRY_TXD_CTS_FRAME,
ENTRY_TXD_OFDM_RATE,
ENTRY_TXD_GENERATE_SEQ,
ENTRY_TXD_FIRST_FRAGMENT,
ENTRY_TXD_MORE_FRAG,
ENTRY_TXD_REQ_TIMESTAMP,

32
drivers/net/wireless/rt2x00/rt2x00usb.c
View File

@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, void *buffer,
const u16 buffer_length,
const int timeout)
{
int status = 0;
unsigned char *tb;
u16 off, len, bsize;
mutex_lock(&rt2x00dev->usb_cache_mutex);
tb = buffer;
off = offset;
len = buffer_length;
while (len && !status) {
bsize = min_t(u16, CSR_CACHE_SIZE, len);
status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
requesttype, off, tb,
bsize, timeout);
tb += bsize;
len -= bsize;
off += bsize;
}
mutex_unlock(&rt2x00dev->usb_cache_mutex);
return status;
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
/*
* TX data handlers.
*/

22
drivers/net/wireless/rt2x00/rt2x00usb.h
View File

@ -70,8 +70,7 @@
/*
* Cache size
*/
#define CSR_CACHE_SIZE 8
#define CSR_CACHE_SIZE_FIRMWARE 64
#define CSR_CACHE_SIZE 64
/*
* USB request types.
@ -171,6 +170,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
const u16 offset, void *buffer,
const u16 buffer_length, const int timeout);
/**
* rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
* @rt2x00dev: Pointer to &struct rt2x00_dev
* @request: USB vendor command (See &enum rt2x00usb_vendor_request)
* @requesttype: Request type &USB_VENDOR_REQUEST_*
* @offset: Register start offset to perform action on
* @buffer: Buffer where information will be read/written to by device
* @buffer_length: Size of &buffer
* @timeout: Operation timeout
*
* This function is used to transfer register data in blocks larger
* then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
*/
int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, void *buffer,
const u16 buffer_length,
const int timeout);
/**
* rt2x00usb_vendor_request_sw - Send single register command to device
* @rt2x00dev: Pointer to &struct rt2x00_dev

4
drivers/net/wireless/rt2x00/rt61pci.c
View File

@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_desc_write(txd, 1, word);
@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = 0;

56
drivers/net/wireless/rt2x00/rt73usb.c
View File

@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
unsigned int i;
int status;
u32 reg;
const char *ptr = data;
char *cache;
int buflen;
/*
* Wait for stable hardware.
@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
/*
* Write firmware to device.
* We setup a seperate cache for this action,
* since we are going to write larger chunks of data
* then normally used cache size.
*/
cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
if (!cache) {
ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
return -ENOMEM;
}
for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
memcpy(cache, ptr, buflen);
rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT,
FIRMWARE_IMAGE_BASE + i, 0,
cache, buflen,
REGISTER_TIMEOUT32(buflen));
ptr += buflen;
}
kfree(cache);
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT,
FIRMWARE_IMAGE_BASE,
data, len,
REGISTER_TIMEOUT32(len));
/*
* Send firmware request to device to load firmware,
@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
u32 word, len;
/*
* Add the descriptor in front of the skb.
@ -1360,6 +1340,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
skbdesc->desc = entry->skb->data;
/*
* Adjust the beacon databyte count. The current number is
* calculated before this function gets called, but falsely
* assumes that the descriptor was already present in the SKB.
*/
rt2x00_desc_read(skbdesc->desc, 0, &word);
len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
len += skbdesc->desc_len;
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
rt2x00_desc_write(skbdesc->desc, 0, word);
/*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, beacon_base, 0,
entry->skb->data, entry->skb->len,
REGISTER_TIMEOUT32(entry->skb->len));
rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, beacon_base,
entry->skb->data, entry->skb->len,
REGISTER_TIMEOUT32(entry->skb->len));
/*
* Clean up the beacon skb.
@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;

11
drivers/net/wireless/rtl8187.h
View File

@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
struct rtl8187b_rx_hdr {
__le32 flags;
__le64 mac_time;
u8 noise;
u8 signal;
u8 sq;
u8 rssi;
u8 agc;
u8 reserved;
__le32 unused;
u8 flags2;
__le16 snr_long2end;
s8 pwdb_g12;
u8 fot;
} __attribute__((packed));
/* {rtl8187,rtl8187b}_tx_info is in skb */
@ -100,6 +102,7 @@ struct rtl8187_priv {
struct usb_device *udev;
u32 rx_conf;
u16 txpwr_base;
u16 seqno;
u8 asic_rev;
u8 is_rtl8187b;
enum {

93
drivers/net/wireless/rtl8187_dev.c
View File

@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
unsigned int ep;
void *buf;
struct urb *urb;
@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
ep = epmap[skb_get_queue_mapping(skb)];
}
/* FIXME: The sequence that follows is needed for this driver to
* work with mac80211 since "mac80211: fix TX sequence numbers".
* As with the temporary code in rt2x00, changes will be needed
* to get proper sequence numbers on beacons. In addition, this
* patch places the sequence number in the hardware state, which
* limits us to a single virtual state.
*/
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
priv->seqno += 0x10;
ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
}
info->driver_data[0] = dev;
info->driver_data[1] = urb;
@ -257,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb)
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
u32 flags;
u32 quality;
spin_lock(&priv->rx_queue.lock);
if (skb->next)
@ -280,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb)
flags = le32_to_cpu(hdr->flags);
signal = hdr->signal & 0x7f;
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.signal = signal;
rx_status.noise = hdr->noise;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
priv->signal = signal;
priv->quality = signal;
rx_status.qual = priv->quality;
priv->noise = hdr->noise;
rate = (flags >> 20) & 0xF;
if (rate > 3) { /* OFDM rate */
if (signal > 90)
signal = 90;
else if (signal < 25)
signal = 25;
signal = 90 - signal;
} else { /* CCK rate */
if (signal > 95)
signal = 95;
else if (signal < 30)
signal = 30;
signal = 95 - signal;
}
rx_status.signal = signal;
priv->signal = signal;
} else {
struct rtl8187b_rx_hdr *hdr =
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
/* The Realtek datasheet for the RTL8187B shows that the RX
* header contains the following quantities: signal quality,
* RSSI, AGC, the received power in dB, and the measured SNR.
* In testing, none of these quantities show qualitative
* agreement with AP signal strength, except for the AGC,
* which is inversely proportional to the strength of the
* signal. In the following, the quality and signal strength
* are derived from the AGC. The arbitrary scaling constants
* are chosen to make the results close to the values obtained
* for a BCM4312 using b43 as the driver. The noise is ignored
* for now.
*/
flags = le32_to_cpu(hdr->flags);
signal = hdr->agc >> 1;
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.signal = 64 - min(hdr->noise, (u8)64);
rx_status.noise = hdr->noise;
quality = 170 - hdr->agc;
if (quality > 100)
quality = 100;
signal = 14 - hdr->agc / 2;
rx_status.qual = quality;
priv->quality = quality;
rx_status.signal = signal;
priv->signal = signal;
rx_status.antenna = (hdr->rssi >> 7) & 1;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
priv->signal = hdr->signal;
priv->quality = hdr->agc >> 1;
priv->noise = hdr->noise;
rate = (flags >> 20) & 0xF;
}
skb_trim(skb, flags & 0x0FFF);
rate = (flags >> 20) & 0xF;
if (rate > 3) { /* OFDM rate */
if (signal > 90)
signal = 90;
else if (signal < 25)
signal = 25;
signal = 90 - signal;
} else { /* CCK rate */
if (signal > 95)
signal = 95;
else if (signal < 30)
signal = 30;
signal = 95 - signal;
}
rx_status.qual = priv->quality;
rx_status.signal = signal;
rx_status.rate_idx = rate;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
@ -1015,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
priv->mode = IEEE80211_IF_TYPE_MNTR;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
dev->max_signal = 65;
IEEE80211_HW_RX_INCLUDES_FCS;
eeprom.data = dev;
eeprom.register_read = rtl8187_eeprom_register_read;
@ -1132,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
(*channel++).hw_value = txpwr >> 8;
}
if (priv->is_rtl8187b)
if (priv->is_rtl8187b) {
printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
"is EXPERIMENTAL, and could damage your\n"
" hardware, use at your own risk\n");
dev->flags |= IEEE80211_HW_SIGNAL_DBM;
} else {
dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
dev->max_signal = 65;
}
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
" info!\n");

1
drivers/net/wireless/zd1211rw/zd_mac.c
View File

@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_SIGNAL_DB;
hw->max_signal = 100;

8
include/linux/rfkill.h
View File

@ -68,7 +68,8 @@ enum rfkill_state {
* @user_claim_unsupported: Whether the hardware supports exclusive
* RF-kill control by userspace. Set this before registering.
* @user_claim: Set when the switch is controlled exlusively by userspace.
* @mutex: Guards switch state transitions
* @mutex: Guards switch state transitions. It serializes callbacks
* and also protects the state.
* @data: Pointer to the RF button drivers private data which will be
* passed along when toggling radio state.
* @toggle_radio(): Mandatory handler to control state of the radio.
@ -89,12 +90,13 @@ struct rfkill {
const char *name;
enum rfkill_type type;
enum rfkill_state state;
bool user_claim_unsupported;
bool user_claim;
/* the mutex serializes callbacks and also protects
* the state */
struct mutex mutex;
enum rfkill_state state;
void *data;
int (*toggle_radio)(void *data, enum rfkill_state state);
int (*get_state)(void *data, enum rfkill_state *state);

5
include/linux/skbuff.h
View File

@ -316,7 +316,10 @@ struct sk_buff {
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
/* 14 bit hole */
#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
__u8 do_not_encrypt:1;
#endif
/* 0/13/14 bit hole */
#ifdef CONFIG_NET_DMA
dma_cookie_t dma_cookie;

7
include/net/mac80211.h
View File

@ -206,8 +206,6 @@ struct ieee80211_bss_conf {
* These flags are used with the @flags member of &ieee80211_tx_info.
*
* @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
* @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
* e.g., for EAPOL frame
* @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
* @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
* for combined 802.11g / 802.11b networks)
@ -220,7 +218,6 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
* @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
* through set_retry_limit configured long retry value
* @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
* @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
* @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
* @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@ -253,7 +250,6 @@ struct ieee80211_bss_conf {
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1),
IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2),
IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3),
IEEE80211_TX_CTL_NO_ACK = BIT(4),
@ -263,7 +259,6 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8),
IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9),
IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10),
IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11),
IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12),
IEEE80211_TX_CTL_AMPDU = BIT(13),
IEEE80211_TX_CTL_OFDM_HT = BIT(14),
@ -323,7 +318,6 @@ struct ieee80211_tx_info {
struct ieee80211_vif *vif;
struct ieee80211_key_conf *hw_key;
unsigned long jiffies;
int ifindex;
u16 aid;
s8 rts_cts_rate_idx, alt_retry_rate_idx;
u8 retry_limit;
@ -746,7 +740,6 @@ enum ieee80211_tkip_key_type {
* Measurement, Channel Switch, Quieting, TPC
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0,
IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,

3
net/core/skbuff.c
View File

@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
C(head);
C(data);
C(truesize);
#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
C(do_not_encrypt);
#endif
atomic_set(&n->users, 1);
atomic_inc(&(skb_shinfo(skb)->dataref));

103
net/mac80211/cfg.c
View File

@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct net_device *dev;
enum ieee80211_if_types itype;
struct ieee80211_sub_if_data *sdata;
@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
if (itype == IEEE80211_IF_TYPE_INVALID)
return -EINVAL;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ret = ieee80211_if_change_type(sdata, itype);
@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, u8 *mac_addr,
struct key_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
enum ieee80211_key_alg alg;
struct ieee80211_key *key;
int err;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (params->cipher) {
@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, u8 *mac_addr)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
void (*callback)(void *cookie,
struct key_params *params))
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
u8 seq[6] = {0};
struct key_params params;
@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
u16 iv16;
int err = -ENOENT;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
if (mac_addr) {
@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy,
struct net_device *dev,
u8 key_idx)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
if (dev == local->mdev)
return -EOPNOTSUPP;
rcu_read_lock();
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local,
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_parameters *params)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
int err;
if (dev == local->mdev || params->vlan == local->mdev)
return -EOPNOTSUPP;
/* Prevent a race with changing the rate control algorithm */
if (!netif_running(dev))
return -ENETDOWN;
@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (mac) {
rcu_read_lock();
@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy,
u8 *mac,
struct station_parameters *params)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
if (dev == local->mdev || params->vlan == local->mdev)
return -EOPNOTSUPP;
rcu_read_lock();
/* XXX: get sta belonging to dev */
@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
return -EINVAL;
}
sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
sta->sdata = vlansdata;
ieee80211_send_layer2_update(sta);
}
@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy,
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
int err;
if (dev == local->mdev)
return -EOPNOTSUPP;
if (!netif_running(dev))
return -ENETDOWN;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
if (dev == local->mdev)
return -EOPNOTSUPP;
if (!netif_running(dev))
return -ENETDOWN;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
if (dev == local->mdev)
return -EOPNOTSUPP;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;

12
net/mac80211/main.c
View File

@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
* make a prepared TX frame (one that has been given to hw) to look like brand
* new IEEE 802.11 frame that is ready to go through TX processing again.
* Also, tx_packet_data in cb is restored from tx_control. */
*/
static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
struct ieee80211_key *key,
struct sk_buff *skb)
{
int hdrlen, iv_len, mic_len;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS |
IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
IEEE80211_TX_CTL_REQUEUE |
IEEE80211_TX_CTL_EAPOL_FRAME;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
@ -1731,8 +1725,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
result = ieee80211_wep_init(local);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize wep\n",
wiphy_name(local->hw.wiphy));
printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
wiphy_name(local->hw.wiphy), result);
goto fail_wep;
}

9
net/mac80211/mlme.c
View File

@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
int encrypt)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_tx_info *info;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
skb->dev = sdata->local->mdev;
@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
info = IEEE80211_SKB_CB(skb);
memset(info, 0, sizeof(struct ieee80211_tx_info));
info->control.ifindex = sdata->dev->ifindex;
if (!encrypt)
info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
skb->iif = sdata->dev->ifindex;
skb->do_not_encrypt = !encrypt;
dev_queue_xmit(skb);
}
@ -3303,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev)
ifsta = &sdata->u.sta;
ifsta->state = IEEE80211_MESH_UP;
ieee80211_sta_timer((unsigned long)sdata);
ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
}
#endif

55
net/mac80211/tx.c
View File

@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
rcu_read_unlock();
local->total_ps_buffered = total;
#ifdef MAC80211_VERBOSE_PS_DEBUG
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
wiphy_name(local->hw.wiphy), purged);
#endif
@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
AP_MAX_BC_BUFFER) {
#ifdef MAC80211_VERBOSE_PS_DEBUG
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: BC TX buffer full - "
"dropping the oldest frame\n",
@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
#ifdef MAC80211_VERBOSE_PS_DEBUG
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: STA %s TX "
"buffer full - dropping oldest frame\n",
@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
u16 fc = tx->fc;
if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
if (unlikely(tx->skb->do_not_encrypt))
tx->key = NULL;
else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
tx->key = key;
else if ((key = rcu_dereference(tx->sdata->default_key)))
tx->key = key;
else if (tx->sdata->drop_unencrypted &&
!(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
(tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED)) {
I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
return TX_DROP;
@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
}
if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
tx->skb->do_not_encrypt = 1;
return TX_CONTINUE;
}
@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
memcpy(skb_put(frag, copylen), pos, copylen);
memcpy(frag->cb, first->cb, sizeof(frag->cb));
skb_copy_queue_mapping(frag, first);
frag->do_not_encrypt = first->do_not_encrypt;
pos += copylen;
left -= copylen;
@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
sband = tx->local->hw.wiphy->bands[tx->channel->band];
info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
skb->do_not_encrypt = 1;
info->flags |= IEEE80211_TX_CTL_INJECTED;
tx->flags &= ~IEEE80211_TX_FRAGMENTED;
@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
skb_trim(skb, skb->len - FCS_LEN);
}
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
info->flags &=
~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
tx->skb->do_not_encrypt = 0;
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
tx->flags |= IEEE80211_TX_FRAGMENTED;
break;
@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
struct sk_buff *skb,
struct net_device *mdev)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct net_device *dev;
dev = dev_get_by_index(&init_net, info->control.ifindex);
dev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
dev_put(dev);
dev = NULL;
@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
bool may_encrypt;
int ret;
if (info->control.ifindex)
odev = dev_get_by_index(&init_net, info->control.ifindex);
if (skb->iif)
odev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
dev_put(odev);
odev = NULL;
@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
return 0;
}
memset(info, 0, sizeof(*info));
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
osdata = IEEE80211_DEV_TO_SUB_IF(odev);
may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
may_encrypt = !skb->do_not_encrypt;
headroom = osdata->local->tx_headroom;
if (may_encrypt)
@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_radiotap_header *prthdr =
(struct ieee80211_radiotap_header *)skb->data;
u16 len_rthdr;
@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
skb->dev = local->mdev;
/* needed because we set skb device to master */
info->control.ifindex = dev->ifindex;
skb->iif = dev->ifindex;
info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
/* Interfaces should always request a status report */
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
/* sometimes we do encrypt injected frames, will be fixed
* up in radiotap parser if not wanted */
skb->do_not_encrypt = 0;
/*
* fix up the pointers accounting for the radiotap
@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_info *info;
struct ieee80211_sub_if_data *sdata;
int ret = 1, head_need;
u16 ethertype, hdrlen, meshhdrlen = 0;
@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
nh_pos += hdrlen;
h_pos += hdrlen;
info = IEEE80211_SKB_CB(skb);
memset(info, 0, sizeof(*info));
info->control.ifindex = dev->ifindex;
if (ethertype == ETH_P_PAE)
info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
/* Interfaces should always request a status report */
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
skb->iif = dev->ifindex;
skb->dev = local->mdev;
dev->stats.tx_packets++;
@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
info = IEEE80211_SKB_CB(skb);
skb->do_not_encrypt = 1;
info->band = band;
rate_control_get_rate(local->mdev, sband, skb, &rsel);
@ -1931,7 +1927,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
"no rate found\n",
wiphy_name(local->hw.wiphy));
}
dev_kfree_skb(skb);
dev_kfree_skb_any(skb);
skb = NULL;
goto out;
}
@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
info->tx_rate_idx = rsel.rate_idx;
info->flags |= IEEE80211_TX_CTL_NO_ACK;
info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
if (sdata->bss_conf.use_short_preamble &&

4
net/mac80211/wep.c
View File

@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local)
local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_tx_tfm))
return -ENOMEM;
return PTR_ERR(local->wep_tx_tfm);
local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_rx_tfm)) {
crypto_free_blkcipher(local->wep_tx_tfm);
return -ENOMEM;
return PTR_ERR(local->wep_rx_tfm);
}
return 0;

3
net/mac80211/wme.c
View File

@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local,
{
int i;
/* XXX: currently broken due to cb/requeue use */
return -EPERM;
/* prepare the filter and save it for the SW queue
* matching the received HW queue */

62
net/rfkill/rfkill.c
View File

@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill)
/**
* rfkill_toggle_radio - wrapper for toggle_radio hook
*
* @rfkill: the rfkill struct to use
* @force: calls toggle_radio even if cache says it is not needed,
* and also makes sure notifications of the state will be
@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill)
* calls and handling all the red tape such as issuing notifications
* if the call is successful.
*
* Note that @force cannot override a (possibly cached) state of
* RFKILL_STATE_HARD_BLOCKED. Any device making use of
* Note that the @force parameter cannot override a (possibly cached)
* state of RFKILL_STATE_HARD_BLOCKED. Any device making use of
* RFKILL_STATE_HARD_BLOCKED implements either get_state() or
* rfkill_force_state(), so the cache either is bypassed or valid.
*
@ -150,7 +149,7 @@ static void update_rfkill_state(struct rfkill *rfkill)
* even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
* give the driver a hint that it should double-BLOCK the transmitter.
*
* Caller must have aquired rfkill_mutex.
* Caller must have acquired rfkill->mutex.
*/
static int rfkill_toggle_radio(struct rfkill *rfkill,
enum rfkill_state state,
@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
/**
* rfkill_switch_all - Toggle state of all switches of given type
* @type: type of interfaces to be affeceted
* @type: type of interfaces to be affected
* @state: the new state
*
* This function toggles state of all switches of given type unless
* a specific switch is claimed by userspace in which case it is
* left alone.
* This function toggles the state of all switches of given type,
* unless a specific switch is claimed by userspace (in which case,
* that switch is left alone).
*/
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
{
@ -216,8 +215,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
rfkill_states[type] = state;
list_for_each_entry(rfkill, &rfkill_list, node) {
if ((!rfkill->user_claim) && (rfkill->type == type))
if ((!rfkill->user_claim) && (rfkill->type == type)) {
mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill, state, 0);
mutex_unlock(&rfkill->mutex);
}
}
mutex_unlock(&rfkill_mutex);
@ -228,7 +230,7 @@ EXPORT_SYMBOL(rfkill_switch_all);
* rfkill_epo - emergency power off all transmitters
*
* This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
* everything in its path but rfkill_mutex.
* everything in its path but rfkill_mutex and rfkill->mutex.
*/
void rfkill_epo(void)
{
@ -236,7 +238,9 @@ void rfkill_epo(void)
mutex_lock(&rfkill_mutex);
list_for_each_entry(rfkill, &rfkill_list, node) {
mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
mutex_unlock(&rfkill->mutex);
}
mutex_unlock(&rfkill_mutex);
}
@ -252,7 +256,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo);
* a notification by the firmware/hardware of the current *real*
* state of the radio rfkill switch.
*
* It may not be called from an atomic context.
* Devices which are subject to external changes on their rfkill
* state (such as those caused by a hardware rfkill line) MUST
* have their driver arrange to call rfkill_force_state() as soon
* as possible after such a change.
*
* This function may not be called from an atomic context.
*/
int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
{
@ -367,6 +376,9 @@ static ssize_t rfkill_claim_store(struct device *dev,
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (rfkill->user_claim_unsupported)
return -EOPNOTSUPP;
/*
* Take the global lock to make sure the kernel is not in
* the middle of rfkill_switch_all
@ -375,19 +387,17 @@ static ssize_t rfkill_claim_store(struct device *dev,
if (error)
return error;
if (rfkill->user_claim_unsupported) {
error = -EOPNOTSUPP;
goto out_unlock;
}
if (rfkill->user_claim != claim) {
if (!claim)
if (!claim) {
mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill,
rfkill_states[rfkill->type],
0);
mutex_unlock(&rfkill->mutex);
}
rfkill->user_claim = claim;
}
out_unlock:
mutex_unlock(&rfkill_mutex);
return error ? error : count;
@ -516,8 +526,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
{
mutex_lock(&rfkill_mutex);
list_del_init(&rfkill->node);
rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
mutex_unlock(&rfkill_mutex);
mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
mutex_unlock(&rfkill->mutex);
}
/**
@ -526,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
* @type: type of the switch (RFKILL_TYPE_*)
*
* This function should be called by the network driver when it needs
* rfkill structure. Once the structure is allocated the driver shoud
* finish its initialization by setting name, private data, enable_radio
* rfkill structure. Once the structure is allocated the driver should
* finish its initialization by setting the name, private data, enable_radio
* and disable_radio methods and then register it with rfkill_register().
*
* NOTE: If registration fails the structure shoudl be freed by calling
* rfkill_free() otherwise rfkill_unregister() should be used.
*/
@ -560,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate);
* rfkill_free - Mark rfkill structure for deletion
* @rfkill: rfkill structure to be destroyed
*
* Decrements reference count of rfkill structure so it is destroyed.
* Decrements reference count of the rfkill structure so it is destroyed.
* Note that rfkill_free() should _not_ be called after rfkill_unregister().
*/
void rfkill_free(struct rfkill *rfkill)
@ -585,8 +599,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
{
#ifdef CONFIG_RFKILL_LEDS
if (rfkill->led_trigger.name)
if (rfkill->led_trigger.name) {
led_trigger_unregister(&rfkill->led_trigger);
rfkill->led_trigger.name = NULL;
}
#endif
}
@ -622,8 +638,8 @@ int rfkill_register(struct rfkill *rfkill)
error = device_add(dev);
if (error) {
rfkill_led_trigger_unregister(rfkill);
rfkill_remove_switch(rfkill);
rfkill_led_trigger_unregister(rfkill);
return error;
}

279
net/wireless/nl80211.c
View File

@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = {
};
/* internal helper: get drv and dev */
static int get_drv_dev_by_info_ifindex(struct genl_info *info,
static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
struct cfg80211_registered_device **drv,
struct net_device **dev)
{
int ifindex;
if (!info->attrs[NL80211_ATTR_IFINDEX])
if (!attrs[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
*dev = dev_get_by_index(&init_net, ifindex);
if (!*dev)
return -ENODEV;
@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
mutex_lock(&cfg80211_drv_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
if (++wp_idx < wp_start)
if (wp_idx < wp_start) {
wp_idx++;
continue;
}
if_idx = 0;
mutex_lock(&dev->devlist_mtx);
list_for_each_entry(wdev, &dev->netdev_list, list) {
if (++if_idx < if_start)
if (if_idx < if_start) {
if_idx++;
continue;
}
if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev) < 0)
break;
wdev->netdev) < 0) {
mutex_unlock(&dev->devlist_mtx);
goto out;
}
if_idx++;
}
mutex_unlock(&dev->devlist_mtx);
wp_idx++;
}
out:
mutex_unlock(&cfg80211_drv_mutex);
cb->args[0] = wp_idx;
@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
struct net_device *netdev;
int err;
err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
if (err)
return err;
@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
} else
return -EINVAL;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
ifindex = dev->ifindex;
@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
int ifindex, err;
struct net_device *dev;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
ifindex = dev->ifindex;
@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
return -EINVAL;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
struct beacon_parameters params;
int haveinfo = 0;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
int err;
struct net_device *dev;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
}
static int nl80211_dump_station(struct sk_buff *skb,
struct netlink_callback *cb)
struct netlink_callback *cb)
{
int wp_idx = 0;
int if_idx = 0;
int sta_idx = cb->args[2];
int wp_start = cb->args[0];
int if_start = cb->args[1];
struct station_info sinfo;
struct cfg80211_registered_device *dev;
struct wireless_dev *wdev;
struct net_device *netdev;
u8 mac_addr[ETH_ALEN];
int ifidx = cb->args[0];
int sta_idx = cb->args[1];
int err;
int exit = 0;
/* TODO: filter by device */
mutex_lock(&cfg80211_drv_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
if (exit)
break;
if (++wp_idx < wp_start)
continue;
if_idx = 0;
if (!ifidx) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
nl80211_fam.attrbuf, nl80211_fam.maxattr,
nl80211_policy);
if (err)
return err;
mutex_lock(&dev->devlist_mtx);
list_for_each_entry(wdev, &dev->netdev_list, list) {
if (exit)
break;
if (++if_idx < if_start)
continue;
if (!dev->ops->dump_station)
continue;
if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
return -EINVAL;
for (;; ++sta_idx) {
rtnl_lock();
err = dev->ops->dump_station(&dev->wiphy,
wdev->netdev, sta_idx, mac_addr,
&sinfo);
rtnl_unlock();
if (err) {
sta_idx = 0;
break;
}
if (nl80211_send_station(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev, mac_addr,
&sinfo) < 0) {
exit = 1;
break;
}
}
}
mutex_unlock(&dev->devlist_mtx);
ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
if (!ifidx)
return -EINVAL;
}
mutex_unlock(&cfg80211_drv_mutex);
cb->args[0] = wp_idx;
cb->args[1] = if_idx;
cb->args[2] = sta_idx;
netdev = dev_get_by_index(&init_net, ifidx);
if (!netdev)
return -ENODEV;
return skb->len;
dev = cfg80211_get_dev_from_ifindex(ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_put_netdev;
}
if (!dev->ops->dump_station) {
err = -ENOSYS;
goto out_err;
}
rtnl_lock();
while (1) {
err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
mac_addr, &sinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err_rtnl;
if (nl80211_send_station(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
netdev, mac_addr,
&sinfo) < 0)
goto out;
sta_idx++;
}
out:
cb->args[1] = sta_idx;
err = skb->len;
out_err_rtnl:
rtnl_unlock();
out_err:
cfg80211_put_dev(dev);
out_put_netdev:
dev_put(netdev);
return err;
}
static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
&params.station_flags))
return -EINVAL;
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
}
static int nl80211_dump_mpath(struct sk_buff *skb,
struct netlink_callback *cb)
struct netlink_callback *cb)
{
int wp_idx = 0;
int if_idx = 0;
int sta_idx = cb->args[2];
int wp_start = cb->args[0];
int if_start = cb->args[1];
struct mpath_info pinfo;
struct cfg80211_registered_device *dev;
struct wireless_dev *wdev;
struct net_device *netdev;
u8 dst[ETH_ALEN];
u8 next_hop[ETH_ALEN];
int ifidx = cb->args[0];
int path_idx = cb->args[1];
int err;
int exit = 0;
/* TODO: filter by device */
mutex_lock(&cfg80211_drv_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
if (exit)
break;
if (++wp_idx < wp_start)
continue;
if_idx = 0;
if (!ifidx) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
nl80211_fam.attrbuf, nl80211_fam.maxattr,
nl80211_policy);
if (err)
return err;
mutex_lock(&dev->devlist_mtx);
list_for_each_entry(wdev, &dev->netdev_list, list) {
if (exit)
break;
if (++if_idx < if_start)
continue;
if (!dev->ops->dump_mpath)
continue;
if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
return -EINVAL;
for (;; ++sta_idx) {
rtnl_lock();
err = dev->ops->dump_mpath(&dev->wiphy,
wdev->netdev, sta_idx, dst,
next_hop, &pinfo);
rtnl_unlock();
if (err) {
sta_idx = 0;
break;
}
if (nl80211_send_mpath(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
wdev->netdev, dst, next_hop,
&pinfo) < 0) {
exit = 1;
break;
}
}
}
mutex_unlock(&dev->devlist_mtx);
ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
if (!ifidx)
return -EINVAL;
}
mutex_unlock(&cfg80211_drv_mutex);
cb->args[0] = wp_idx;
cb->args[1] = if_idx;
cb->args[2] = sta_idx;
netdev = dev_get_by_index(&init_net, ifidx);
if (!netdev)
return -ENODEV;
return skb->len;
dev = cfg80211_get_dev_from_ifindex(ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_put_netdev;
}
if (!dev->ops->dump_mpath) {
err = -ENOSYS;
goto out_err;
}
rtnl_lock();
while (1) {
err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
dst, next_hop, &pinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err_rtnl;
if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
netdev, dst, next_hop,
&pinfo) < 0)
goto out;
path_idx++;
}
out:
cb->args[1] = path_idx;
err = skb->len;
out_err_rtnl:
rtnl_unlock();
out_err:
cfg80211_put_dev(dev);
out_put_netdev:
dev_put(netdev);
return err;
}
static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_MAC])
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;