remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs
The Texas Instrument's Keystone 2 family of SoCs has 1 or more TMS320C66x DSP Core Subsystems (C66x CorePacs). Each subsystem has a C66x Fixed/Floating-Point DSP Core, with 32KB of L1P and L1D SRAMs, that can be configured and partitioned as either RAM and/or Cache, and 1 MB of L2 SRAM. The CorePac also includes an Internal DMA (IDMA), External Memory Controller (EMC), Extended Memory Controller (XMC) with a Memory Protection and Address Extension (MPAX) unit, a Bandwidth Management (BWM) unit, an Interrupt Controller (INTC) and a Powerdown Controller (PDC). A new remoteproc module is added to perform the device management of these DSP devices. The driver expects the firmware names to be of the form "keystone-dsp<X>-fw", where X is the corresponding DSP number, and uses the standard remoteproc core ELF loader. The support is limited to images only using the DSP internal memories at the moment. This remoteproc driver is also designed to work with virtio, and uses the IPC Generation registers for performing the virtio signalling and getting notified of exceptions. The driver currently supports the 66AK2H/66AK2K, 66AK2L and 66AK2E SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sam Nelson <sam.nelson@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Suman Anna
Bjorn Andersson
parent
fd7c7041a4
commit
e88bb8f7a1
|
|
@ -71,6 +71,19 @@ config DA8XX_REMOTEPROC
|
|||
It's safe to say n here if you're not interested in multimedia
|
||||
offloading.
|
||||
|
||||
config KEYSTONE_REMOTEPROC
|
||||
tristate "Keystone Remoteproc support"
|
||||
depends on ARCH_KEYSTONE
|
||||
depends on RESET_CONTROLLER
|
||||
depends on REMOTEPROC
|
||||
select RPMSG_VIRTIO
|
||||
help
|
||||
Say Y here here to support Keystone remote processors (DSP)
|
||||
via the remote processor framework.
|
||||
|
||||
It's safe to say N here if you're not interested in the Keystone
|
||||
DSPs or just want to use a bare minimum kernel.
|
||||
|
||||
config QCOM_ADSP_PIL
|
||||
tristate "Qualcomm ADSP Peripheral Image Loader"
|
||||
depends on OF && ARCH_QCOM
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ remoteproc-y += remoteproc_elf_loader.o
|
|||
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
|
||||
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
|
||||
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
|
||||
obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
|
||||
obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o
|
||||
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
|
||||
obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,515 @@
|
|||
/*
|
||||
* TI Keystone DSP remoteproc driver
|
||||
*
|
||||
* Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_reserved_mem.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/remoteproc.h>
|
||||
#include <linux/reset.h>
|
||||
|
||||
#include "remoteproc_internal.h"
|
||||
|
||||
#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1)
|
||||
|
||||
/**
|
||||
* struct keystone_rproc_mem - internal memory structure
|
||||
* @cpu_addr: MPU virtual address of the memory region
|
||||
* @bus_addr: Bus address used to access the memory region
|
||||
* @dev_addr: Device address of the memory region from DSP view
|
||||
* @size: Size of the memory region
|
||||
*/
|
||||
struct keystone_rproc_mem {
|
||||
void __iomem *cpu_addr;
|
||||
phys_addr_t bus_addr;
|
||||
u32 dev_addr;
|
||||
size_t size;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct keystone_rproc - keystone remote processor driver structure
|
||||
* @dev: cached device pointer
|
||||
* @rproc: remoteproc device handle
|
||||
* @mem: internal memory regions data
|
||||
* @num_mems: number of internal memory regions
|
||||
* @dev_ctrl: device control regmap handle
|
||||
* @reset: reset control handle
|
||||
* @boot_offset: boot register offset in @dev_ctrl regmap
|
||||
* @irq_ring: irq entry for vring
|
||||
* @irq_fault: irq entry for exception
|
||||
* @kick_gpio: gpio used for virtio kicks
|
||||
* @workqueue: workqueue for processing virtio interrupts
|
||||
*/
|
||||
struct keystone_rproc {
|
||||
struct device *dev;
|
||||
struct rproc *rproc;
|
||||
struct keystone_rproc_mem *mem;
|
||||
int num_mems;
|
||||
struct regmap *dev_ctrl;
|
||||
struct reset_control *reset;
|
||||
u32 boot_offset;
|
||||
int irq_ring;
|
||||
int irq_fault;
|
||||
int kick_gpio;
|
||||
struct work_struct workqueue;
|
||||
};
|
||||
|
||||
/* Put the DSP processor into reset */
|
||||
static void keystone_rproc_dsp_reset(struct keystone_rproc *ksproc)
|
||||
{
|
||||
reset_control_assert(ksproc->reset);
|
||||
}
|
||||
|
||||
/* Configure the boot address and boot the DSP processor */
|
||||
static int keystone_rproc_dsp_boot(struct keystone_rproc *ksproc, u32 boot_addr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (boot_addr & (SZ_1K - 1)) {
|
||||
dev_err(ksproc->dev, "invalid boot address 0x%x, must be aligned on a 1KB boundary\n",
|
||||
boot_addr);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = regmap_write(ksproc->dev_ctrl, ksproc->boot_offset, boot_addr);
|
||||
if (ret) {
|
||||
dev_err(ksproc->dev, "regmap_write of boot address failed, status = %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
reset_control_deassert(ksproc->reset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Process the remoteproc exceptions
|
||||
*
|
||||
* The exception reporting on Keystone DSP remote processors is very simple
|
||||
* compared to the equivalent processors on the OMAP family, it is notified
|
||||
* through a software-designed specific interrupt source in the IPC interrupt
|
||||
* generation register.
|
||||
*
|
||||
* This function just invokes the rproc_report_crash to report the exception
|
||||
* to the remoteproc driver core, to trigger a recovery.
|
||||
*/
|
||||
static irqreturn_t keystone_rproc_exception_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct keystone_rproc *ksproc = dev_id;
|
||||
|
||||
rproc_report_crash(ksproc->rproc, RPROC_FATAL_ERROR);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Main virtqueue message workqueue function
|
||||
*
|
||||
* This function is executed upon scheduling of the keystone remoteproc
|
||||
* driver's workqueue. The workqueue is scheduled by the vring ISR handler.
|
||||
*
|
||||
* There is no payload message indicating the virtqueue index as is the
|
||||
* case with mailbox-based implementations on OMAP family. As such, this
|
||||
* handler processes both the Tx and Rx virtqueue indices on every invocation.
|
||||
* The rproc_vq_interrupt function can detect if there are new unprocessed
|
||||
* messages or not (returns IRQ_NONE vs IRQ_HANDLED), but there is no need
|
||||
* to check for these return values. The index 0 triggering will process all
|
||||
* pending Rx buffers, and the index 1 triggering will process all newly
|
||||
* available Tx buffers and will wakeup any potentially blocked senders.
|
||||
*
|
||||
* NOTE:
|
||||
* 1. A payload could be added by using some of the source bits in the
|
||||
* IPC interrupt generation registers, but this would need additional
|
||||
* changes to the overall IPC stack, and currently there are no benefits
|
||||
* of adapting that approach.
|
||||
* 2. The current logic is based on an inherent design assumption of supporting
|
||||
* only 2 vrings, but this can be changed if needed.
|
||||
*/
|
||||
static void handle_event(struct work_struct *work)
|
||||
{
|
||||
struct keystone_rproc *ksproc =
|
||||
container_of(work, struct keystone_rproc, workqueue);
|
||||
|
||||
rproc_vq_interrupt(ksproc->rproc, 0);
|
||||
rproc_vq_interrupt(ksproc->rproc, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt handler for processing vring kicks from remote processor
|
||||
*/
|
||||
static irqreturn_t keystone_rproc_vring_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct keystone_rproc *ksproc = dev_id;
|
||||
|
||||
schedule_work(&ksproc->workqueue);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Power up the DSP remote processor.
|
||||
*
|
||||
* This function will be invoked only after the firmware for this rproc
|
||||
* was loaded, parsed successfully, and all of its resource requirements
|
||||
* were met.
|
||||
*/
|
||||
static int keystone_rproc_start(struct rproc *rproc)
|
||||
{
|
||||
struct keystone_rproc *ksproc = rproc->priv;
|
||||
int ret;
|
||||
|
||||
INIT_WORK(&ksproc->workqueue, handle_event);
|
||||
|
||||
ret = request_irq(ksproc->irq_ring, keystone_rproc_vring_interrupt, 0,
|
||||
dev_name(ksproc->dev), ksproc);
|
||||
if (ret) {
|
||||
dev_err(ksproc->dev, "failed to enable vring interrupt, ret = %d\n",
|
||||
ret);
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = request_irq(ksproc->irq_fault, keystone_rproc_exception_interrupt,
|
||||
0, dev_name(ksproc->dev), ksproc);
|
||||
if (ret) {
|
||||
dev_err(ksproc->dev, "failed to enable exception interrupt, ret = %d\n",
|
||||
ret);
|
||||
goto free_vring_irq;
|
||||
}
|
||||
|
||||
ret = keystone_rproc_dsp_boot(ksproc, rproc->bootaddr);
|
||||
if (ret)
|
||||
goto free_exc_irq;
|
||||
|
||||
return 0;
|
||||
|
||||
free_exc_irq:
|
||||
free_irq(ksproc->irq_fault, ksproc);
|
||||
free_vring_irq:
|
||||
free_irq(ksproc->irq_ring, ksproc);
|
||||
flush_work(&ksproc->workqueue);
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Stop the DSP remote processor.
|
||||
*
|
||||
* This function puts the DSP processor into reset, and finishes processing
|
||||
* of any pending messages.
|
||||
*/
|
||||
static int keystone_rproc_stop(struct rproc *rproc)
|
||||
{
|
||||
struct keystone_rproc *ksproc = rproc->priv;
|
||||
|
||||
keystone_rproc_dsp_reset(ksproc);
|
||||
free_irq(ksproc->irq_fault, ksproc);
|
||||
free_irq(ksproc->irq_ring, ksproc);
|
||||
flush_work(&ksproc->workqueue);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Kick the remote processor to notify about pending unprocessed messages.
|
||||
* The vqid usage is not used and is inconsequential, as the kick is performed
|
||||
* through a simulated GPIO (a bit in an IPC interrupt-triggering register),
|
||||
* the remote processor is expected to process both its Tx and Rx virtqueues.
|
||||
*/
|
||||
static void keystone_rproc_kick(struct rproc *rproc, int vqid)
|
||||
{
|
||||
struct keystone_rproc *ksproc = rproc->priv;
|
||||
|
||||
if (WARN_ON(ksproc->kick_gpio < 0))
|
||||
return;
|
||||
|
||||
gpio_set_value(ksproc->kick_gpio, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Custom function to translate a DSP device address (internal RAMs only) to a
|
||||
* kernel virtual address. The DSPs can access their RAMs at either an internal
|
||||
* address visible only from a DSP, or at the SoC-level bus address. Both these
|
||||
* addresses need to be looked through for translation. The translated addresses
|
||||
* can be used either by the remoteproc core for loading (when using kernel
|
||||
* remoteproc loader), or by any rpmsg bus drivers.
|
||||
*/
|
||||
static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
|
||||
{
|
||||
struct keystone_rproc *ksproc = rproc->priv;
|
||||
void __iomem *va = NULL;
|
||||
phys_addr_t bus_addr;
|
||||
u32 dev_addr, offset;
|
||||
size_t size;
|
||||
int i;
|
||||
|
||||
if (len <= 0)
|
||||
return NULL;
|
||||
|
||||
for (i = 0; i < ksproc->num_mems; i++) {
|
||||
bus_addr = ksproc->mem[i].bus_addr;
|
||||
dev_addr = ksproc->mem[i].dev_addr;
|
||||
size = ksproc->mem[i].size;
|
||||
|
||||
if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) {
|
||||
/* handle DSP-view addresses */
|
||||
if ((da >= dev_addr) &&
|
||||
((da + len) <= (dev_addr + size))) {
|
||||
offset = da - dev_addr;
|
||||
va = ksproc->mem[i].cpu_addr + offset;
|
||||
break;
|
||||
}
|
||||
} else {
|
||||
/* handle SoC-view addresses */
|
||||
if ((da >= bus_addr) &&
|
||||
(da + len) <= (bus_addr + size)) {
|
||||
offset = da - bus_addr;
|
||||
va = ksproc->mem[i].cpu_addr + offset;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return (__force void *)va;
|
||||
}
|
||||
|
||||
static const struct rproc_ops keystone_rproc_ops = {
|
||||
.start = keystone_rproc_start,
|
||||
.stop = keystone_rproc_stop,
|
||||
.kick = keystone_rproc_kick,
|
||||
.da_to_va = keystone_rproc_da_to_va,
|
||||
};
|
||||
|
||||
static int keystone_rproc_of_get_memories(struct platform_device *pdev,
|
||||
struct keystone_rproc *ksproc)
|
||||
{
|
||||
static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"};
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *res;
|
||||
int num_mems = 0;
|
||||
int i;
|
||||
|
||||
num_mems = ARRAY_SIZE(mem_names);
|
||||
ksproc->mem = devm_kcalloc(ksproc->dev, num_mems,
|
||||
sizeof(*ksproc->mem), GFP_KERNEL);
|
||||
if (!ksproc->mem)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < num_mems; i++) {
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
mem_names[i]);
|
||||
ksproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(ksproc->mem[i].cpu_addr)) {
|
||||
dev_err(dev, "failed to parse and map %s memory\n",
|
||||
mem_names[i]);
|
||||
return PTR_ERR(ksproc->mem[i].cpu_addr);
|
||||
}
|
||||
ksproc->mem[i].bus_addr = res->start;
|
||||
ksproc->mem[i].dev_addr =
|
||||
res->start & KEYSTONE_RPROC_LOCAL_ADDRESS_MASK;
|
||||
ksproc->mem[i].size = resource_size(res);
|
||||
|
||||
/* zero out memories to start in a pristine state */
|
||||
memset((__force void *)ksproc->mem[i].cpu_addr, 0,
|
||||
ksproc->mem[i].size);
|
||||
}
|
||||
ksproc->num_mems = num_mems;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int keystone_rproc_of_get_dev_syscon(struct platform_device *pdev,
|
||||
struct keystone_rproc *ksproc)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device *dev = &pdev->dev;
|
||||
int ret;
|
||||
|
||||
if (!of_property_read_bool(np, "ti,syscon-dev")) {
|
||||
dev_err(dev, "ti,syscon-dev property is absent\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ksproc->dev_ctrl =
|
||||
syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
|
||||
if (IS_ERR(ksproc->dev_ctrl)) {
|
||||
ret = PTR_ERR(ksproc->dev_ctrl);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_index(np, "ti,syscon-dev", 1,
|
||||
&ksproc->boot_offset)) {
|
||||
dev_err(dev, "couldn't read the boot register offset\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int keystone_rproc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
struct keystone_rproc *ksproc;
|
||||
struct rproc *rproc;
|
||||
int dsp_id;
|
||||
char *fw_name = NULL;
|
||||
char *template = "keystone-dsp%d-fw";
|
||||
int name_len = 0;
|
||||
int ret = 0;
|
||||
|
||||
if (!np) {
|
||||
dev_err(dev, "only DT-based devices are supported\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
dsp_id = of_alias_get_id(np, "rproc");
|
||||
if (dsp_id < 0) {
|
||||
dev_warn(dev, "device does not have an alias id\n");
|
||||
return dsp_id;
|
||||
}
|
||||
|
||||
/* construct a custom default fw name - subject to change in future */
|
||||
name_len = strlen(template); /* assuming a single digit alias */
|
||||
fw_name = devm_kzalloc(dev, name_len, GFP_KERNEL);
|
||||
if (!fw_name)
|
||||
return -ENOMEM;
|
||||
snprintf(fw_name, name_len, template, dsp_id);
|
||||
|
||||
rproc = rproc_alloc(dev, dev_name(dev), &keystone_rproc_ops, fw_name,
|
||||
sizeof(*ksproc));
|
||||
if (!rproc)
|
||||
return -ENOMEM;
|
||||
|
||||
rproc->has_iommu = false;
|
||||
ksproc = rproc->priv;
|
||||
ksproc->rproc = rproc;
|
||||
ksproc->dev = dev;
|
||||
|
||||
ret = keystone_rproc_of_get_dev_syscon(pdev, ksproc);
|
||||
if (ret)
|
||||
goto free_rproc;
|
||||
|
||||
ksproc->reset = devm_reset_control_get(dev, NULL);
|
||||
if (IS_ERR(ksproc->reset)) {
|
||||
ret = PTR_ERR(ksproc->reset);
|
||||
goto free_rproc;
|
||||
}
|
||||
|
||||
/* enable clock for accessing DSP internal memories */
|
||||
pm_runtime_enable(dev);
|
||||
ret = pm_runtime_get_sync(dev);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to enable clock, status = %d\n", ret);
|
||||
pm_runtime_put_noidle(dev);
|
||||
goto disable_rpm;
|
||||
}
|
||||
|
||||
ret = keystone_rproc_of_get_memories(pdev, ksproc);
|
||||
if (ret)
|
||||
goto disable_clk;
|
||||
|
||||
ksproc->irq_ring = platform_get_irq_byname(pdev, "vring");
|
||||
if (ksproc->irq_ring < 0) {
|
||||
ret = ksproc->irq_ring;
|
||||
dev_err(dev, "failed to get vring interrupt, status = %d\n",
|
||||
ret);
|
||||
goto disable_clk;
|
||||
}
|
||||
|
||||
ksproc->irq_fault = platform_get_irq_byname(pdev, "exception");
|
||||
if (ksproc->irq_fault < 0) {
|
||||
ret = ksproc->irq_fault;
|
||||
dev_err(dev, "failed to get exception interrupt, status = %d\n",
|
||||
ret);
|
||||
goto disable_clk;
|
||||
}
|
||||
|
||||
ksproc->kick_gpio = of_get_named_gpio_flags(np, "kick-gpios", 0, NULL);
|
||||
if (ksproc->kick_gpio < 0) {
|
||||
ret = ksproc->kick_gpio;
|
||||
dev_err(dev, "failed to get gpio for virtio kicks, status = %d\n",
|
||||
ret);
|
||||
goto disable_clk;
|
||||
}
|
||||
|
||||
if (of_reserved_mem_device_init(dev))
|
||||
dev_warn(dev, "device does not have specific CMA pool\n");
|
||||
|
||||
ret = rproc_add(rproc);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to add register device with remoteproc core, status = %d\n",
|
||||
ret);
|
||||
goto release_mem;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, ksproc);
|
||||
|
||||
return 0;
|
||||
|
||||
release_mem:
|
||||
of_reserved_mem_device_release(dev);
|
||||
disable_clk:
|
||||
pm_runtime_put_sync(dev);
|
||||
disable_rpm:
|
||||
pm_runtime_disable(dev);
|
||||
free_rproc:
|
||||
rproc_free(rproc);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int keystone_rproc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct keystone_rproc *ksproc = platform_get_drvdata(pdev);
|
||||
|
||||
rproc_del(ksproc->rproc);
|
||||
pm_runtime_put_sync(&pdev->dev);
|
||||
pm_runtime_disable(&pdev->dev);
|
||||
rproc_free(ksproc->rproc);
|
||||
of_reserved_mem_device_release(&pdev->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id keystone_rproc_of_match[] = {
|
||||
{ .compatible = "ti,k2hk-dsp", },
|
||||
{ .compatible = "ti,k2l-dsp", },
|
||||
{ .compatible = "ti,k2e-dsp", },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, keystone_rproc_of_match);
|
||||
|
||||
static struct platform_driver keystone_rproc_driver = {
|
||||
.probe = keystone_rproc_probe,
|
||||
.remove = keystone_rproc_remove,
|
||||
.driver = {
|
||||
.name = "keystone-rproc",
|
||||
.of_match_table = keystone_rproc_of_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(keystone_rproc_driver);
|
||||
|
||||
MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("TI Keystone DSP Remoteproc driver");
|
||||
Loading…
Reference in New Issue