USB: global suspend and remote wakeup don't mix

The hub driver was recently changed to use "global" suspend for system
suspend transitions on non-SuperSpeed buses.  This means that we don't
suspend devices individually by setting the suspend feature on the
upstream hub port; instead devices all go into suspend automatically
when the root hub stops transmitting packets.  The idea was to save
time and to avoid certain kinds of wakeup races.

Now it turns out that many hubs are buggy; they don't relay wakeup
requests from a downstream port to their upstream port if the
downstream port's suspend feature is not set (depending on the speed
of the downstream port, whether or not the hub is enabled for remote
wakeup, and possibly other factors).

We can't have hubs dropping wakeup requests.  Therefore this patch
goes partway back to the old policy: It sets the suspend feature for a
port if the device attached to that port or any of its descendants is
enabled for wakeup.  People will still be able to benefit from the
time savings if they don't care about wakeup and leave it disabled on
all their devices.

In order to accomplish this, the patch adds a new field to the usb_hub
structure: wakeup_enabled_descendants is a count of how many devices
below a suspended hub are enabled for remote wakeup.  A corresponding
new subroutine determines the number of wakeup-enabled devices at or
below an arbitrary suspended USB device.

This should be applied to the 3.10 stable kernel.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Alan Stern 2013-07-11 14:58:04 -04:00 committed by Greg Kroah-Hartman
parent 36ff66db3f
commit e583d9db99
2 changed files with 34 additions and 8 deletions

View File

@ -2848,6 +2848,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
USB_CTRL_SET_TIMEOUT);
}
/* Count of wakeup-enabled devices at or below udev */
static unsigned wakeup_enabled_descendants(struct usb_device *udev)
{
struct usb_hub *hub = usb_hub_to_struct_hub(udev);
return udev->do_remote_wakeup +
(hub ? hub->wakeup_enabled_descendants : 0);
}
/*
* usb_port_suspend - suspend a usb device's upstream port
* @udev: device that's no longer in active use, not a root hub
@ -2888,8 +2897,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
*
* If Runtime PM isn't enabled or used, non-SuperSpeed devices really get
* suspended only when their bus goes into global suspend (i.e., the root
* If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
* suspended until their bus goes into global suspend (i.e., the root
* hub is suspended). Nevertheless, we change @udev->state to
* USB_STATE_SUSPENDED as this is the device's "logical" state. The actual
* upstream port setting is stored in @udev->port_is_suspended.
@ -2960,15 +2969,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
else if (PMSG_IS_AUTO(msg))
status = set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_SUSPEND);
/*
* For system suspend, we do not need to enable the suspend feature
* on individual USB-2 ports. The devices will automatically go
* into suspend a few ms after the root hub stops sending packets.
* The USB 2.0 spec calls this "global suspend".
*
* However, many USB hubs have a bug: They don't relay wakeup requests
* from a downstream port if the port's suspend feature isn't on.
* Therefore we will turn on the suspend feature if udev or any of its
* descendants is enabled for remote wakeup.
*/
else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
status = set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_SUSPEND);
else {
really_suspend = false;
status = 0;
@ -3003,15 +3018,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (!PMSG_IS_AUTO(msg))
status = 0;
} else {
/* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
udev->do_remote_wakeup);
usb_set_device_state(udev, USB_STATE_SUSPENDED);
if (really_suspend) {
udev->port_is_suspended = 1;
/* device has up to 10 msec to fully suspend */
msleep(10);
}
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
/*
@ -3293,7 +3309,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
unsigned port1;
int status;
/* Warn if children aren't already suspended */
/*
* Warn if children aren't already suspended.
* Also, add up the number of wakeup-enabled descendants.
*/
hub->wakeup_enabled_descendants = 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
@ -3303,6 +3323,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
if (udev)
hub->wakeup_enabled_descendants +=
wakeup_enabled_descendants(udev);
}
if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {

View File

@ -59,6 +59,9 @@ struct usb_hub {
struct usb_tt tt; /* Transaction Translator */
unsigned mA_per_port; /* current for each child */
#ifdef CONFIG_PM
unsigned wakeup_enabled_descendants;
#endif
unsigned limited_power:1;
unsigned quiescing:1;