diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty new file mode 100644 index 000000000000..2bf6b24e781b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -0,0 +1,6 @@ +What: /sys/class/leds//ttyname +Date: Dec 2020 +KernelVersion: 5.10 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the tty device name of the triggering tty diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 9702c07a6b6c..2b06c6ce4a75 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) maintainers: - - Fabio Estevam + - Fabio Estevam allOf: - $ref: "serial.yaml" diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml index ce1d89496342..14c7594c88c6 100644 --- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS Application UART (AUART) maintainers: - - Fabio Estevam + - Fabio Estevam allOf: - $ref: "serial.yaml" diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index c139c5edb93e..512a84942f78 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -51,6 +51,7 @@ properties: - renesas,hscif-r8a77980 # R-Car V3H - renesas,hscif-r8a77990 # R-Car E3 - renesas,hscif-r8a77995 # R-Car D3 + - renesas,hscif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt deleted file mode 100644 index 1e48bbbeecc6..000000000000 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ /dev/null @@ -1,34 +0,0 @@ -* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * - -Required properties: -- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". -- reg : Offset and length of the register set for the device -- interrupts : Should contain uart interrupt -- fifosize : Should define hardware rx/tx fifo size -- clocks : Should contain uart clock number - -Optional properties: -- uart-has-rtscts: we have hardware flow controller pins in hardware -- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true -- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true - -Example: - -uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; -}; - -On the board-specific dts, we can put rts-gpios and cts-gpios like - -usp@b0090000 { - compatible = "sirf,prima2-usp-uart"; - uart-has-rtscts; - rts-gpios = <&gpio 15 0>; - cts-gpios = <&gpio 46 0>; -}; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 06d5f251ec88..8631678283f9 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -50,11 +50,14 @@ properties: minItems: 1 maxItems: 2 - cts-gpios: - maxItems: 1 - - rts-gpios: - maxItems: 1 +# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' +# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow +# control instead of dedicated pins. +# +# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or +# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design. + cts-gpios: true + rts-gpios: true wakeup-source: true diff --git a/Documentation/networking/caif/caif.rst b/Documentation/networking/caif/caif.rst index a07213030ccf..81a14373d780 100644 --- a/Documentation/networking/caif/caif.rst +++ b/Documentation/networking/caif/caif.rst @@ -68,7 +68,6 @@ There are debugfs parameters provided for serial communication. * tty_status: Prints the bit-mask tty status information - 0x01 - tty->warned is on. - - 0x02 - tty->low_latency is on. - 0x04 - tty->packed is on. - 0x08 - tty->flow_stopped is on. - 0x10 - tty->hw_stopped is on. diff --git a/drivers/accessibility/speakup/spk_ttyio.c b/drivers/accessibility/speakup/spk_ttyio.c index 6284aff434a1..835d17455fcd 100644 --- a/drivers/accessibility/speakup/spk_ttyio.c +++ b/drivers/accessibility/speakup/spk_ttyio.c @@ -152,7 +152,7 @@ static int spk_ttyio_initialise_ldisc(struct spk_synth *synth) if (ret) return ret; - tty = tty_kopen(dev); + tty = tty_kopen_exclusive(dev); if (IS_ERR(tty)) return PTR_ERR(tty); diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 8be4d807d137..637c5b8c2aa1 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -801,7 +801,8 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file, * We don't provide read/write/poll interface for user space. */ static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) { return 0; } @@ -818,29 +819,28 @@ static __poll_t hci_uart_tty_poll(struct tty_struct *tty, return 0; } +static struct tty_ldisc_ops hci_uart_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_hci", + .open = hci_uart_tty_open, + .close = hci_uart_tty_close, + .read = hci_uart_tty_read, + .write = hci_uart_tty_write, + .ioctl = hci_uart_tty_ioctl, + .compat_ioctl = hci_uart_tty_ioctl, + .poll = hci_uart_tty_poll, + .receive_buf = hci_uart_tty_receive, + .write_wakeup = hci_uart_tty_wakeup, +}; + static int __init hci_uart_init(void) { - static struct tty_ldisc_ops hci_uart_ldisc; int err; BT_INFO("HCI UART driver ver %s", VERSION); /* Register the tty discipline */ - - memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc)); - hci_uart_ldisc.magic = TTY_LDISC_MAGIC; - hci_uart_ldisc.name = "n_hci"; - hci_uart_ldisc.open = hci_uart_tty_open; - hci_uart_ldisc.close = hci_uart_tty_close; - hci_uart_ldisc.read = hci_uart_tty_read; - hci_uart_ldisc.write = hci_uart_tty_write; - hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; - hci_uart_ldisc.compat_ioctl = hci_uart_tty_ioctl; - hci_uart_ldisc.poll = hci_uart_tty_poll; - hci_uart_ldisc.receive_buf = hci_uart_tty_receive; - hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup; - hci_uart_ldisc.owner = THIS_MODULE; - err = tty_register_ldisc(N_HCI, &hci_uart_ldisc); if (err) { BT_ERR("HCI line discipline registration failed. (%d)", err); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index e342daa73d1b..2be8d9a8eec5 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2494,8 +2494,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", __FILE__, __LINE__, tty->driver->name, port->count); - port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { retval = -EBUSY; diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 8ac970a423de..33e9d9bfd036 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -156,7 +156,9 @@ out: * returning 0 characters. */ -static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char __user * buf, size_t nr) +static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, + unsigned char *kbuf, size_t nr, + void **cookie, unsigned long offset) { struct serport *serport = (struct serport*) tty->disc_data; struct serio *serio; diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig index ce9429ca6dde..b77a01bd27f4 100644 --- a/drivers/leds/trigger/Kconfig +++ b/drivers/leds/trigger/Kconfig @@ -144,4 +144,13 @@ config LEDS_TRIGGER_AUDIO the audio mute and mic-mute changes. If unsure, say N +config LEDS_TRIGGER_TTY + tristate "LED Trigger for TTY devices" + depends on TTY + help + This allows LEDs to be controlled by activity on ttys which includes + serial devices like /dev/ttyS0. + + When build as a module this driver will be called ledtrig-tty. + endif # LEDS_TRIGGERS diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile index 733a83e2a718..25c4db97cdd4 100644 --- a/drivers/leds/trigger/Makefile +++ b/drivers/leds/trigger/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o obj-$(CONFIG_LEDS_TRIGGER_AUDIO) += ledtrig-audio.o +obj-$(CONFIG_LEDS_TRIGGER_TTY) += ledtrig-tty.o diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c new file mode 100644 index 000000000000..d2ab6ab080ac --- /dev/null +++ b/drivers/leds/trigger/ledtrig-tty.c @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include +#include +#include +#include + +struct ledtrig_tty_data { + struct led_classdev *led_cdev; + struct delayed_work dwork; + struct mutex mutex; + const char *ttyname; + struct tty_struct *tty; + int rx, tx; +}; + +static void ledtrig_tty_restart(struct ledtrig_tty_data *trigger_data) +{ + schedule_delayed_work(&trigger_data->dwork, 0); +} + +static ssize_t ttyname_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev); + ssize_t len = 0; + + mutex_lock(&trigger_data->mutex); + + if (trigger_data->ttyname) + len = sprintf(buf, "%s\n", trigger_data->ttyname); + + mutex_unlock(&trigger_data->mutex); + + return len; +} + +static ssize_t ttyname_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t size) +{ + struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev); + char *ttyname; + ssize_t ret = size; + bool running; + + if (size > 0 && buf[size - 1] == '\n') + size -= 1; + + if (size) { + ttyname = kmemdup_nul(buf, size, GFP_KERNEL); + if (!ttyname) { + ret = -ENOMEM; + goto out_unlock; + } + } else { + ttyname = NULL; + } + + mutex_lock(&trigger_data->mutex); + + running = trigger_data->ttyname != NULL; + + kfree(trigger_data->ttyname); + tty_kref_put(trigger_data->tty); + trigger_data->tty = NULL; + + trigger_data->ttyname = ttyname; + +out_unlock: + mutex_unlock(&trigger_data->mutex); + + if (ttyname && !running) + ledtrig_tty_restart(trigger_data); + + return ret; +} +static DEVICE_ATTR_RW(ttyname); + +static void ledtrig_tty_work(struct work_struct *work) +{ + struct ledtrig_tty_data *trigger_data = + container_of(work, struct ledtrig_tty_data, dwork.work); + struct serial_icounter_struct icount; + int ret; + + mutex_lock(&trigger_data->mutex); + + if (!trigger_data->ttyname) { + /* exit without rescheduling */ + mutex_unlock(&trigger_data->mutex); + return; + } + + /* try to get the tty corresponding to $ttyname */ + if (!trigger_data->tty) { + dev_t devno; + struct tty_struct *tty; + int ret; + + ret = tty_dev_name_to_number(trigger_data->ttyname, &devno); + if (ret < 0) + /* + * A device with this name might appear later, so keep + * retrying. + */ + goto out; + + tty = tty_kopen_shared(devno); + if (IS_ERR(tty) || !tty) + /* What to do? retry or abort */ + goto out; + + trigger_data->tty = tty; + } + + ret = tty_get_icount(trigger_data->tty, &icount); + if (ret) { + dev_info(trigger_data->tty->dev, "Failed to get icount, stopped polling\n"); + mutex_unlock(&trigger_data->mutex); + return; + } + + if (icount.rx != trigger_data->rx || + icount.tx != trigger_data->tx) { + led_set_brightness(trigger_data->led_cdev, LED_ON); + + trigger_data->rx = icount.rx; + trigger_data->tx = icount.tx; + } else { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } + +out: + mutex_unlock(&trigger_data->mutex); + schedule_delayed_work(&trigger_data->dwork, msecs_to_jiffies(100)); +} + +static struct attribute *ledtrig_tty_attrs[] = { + &dev_attr_ttyname.attr, + NULL +}; +ATTRIBUTE_GROUPS(ledtrig_tty); + +static int ledtrig_tty_activate(struct led_classdev *led_cdev) +{ + struct ledtrig_tty_data *trigger_data; + + trigger_data = kzalloc(sizeof(*trigger_data), GFP_KERNEL); + if (!trigger_data) + return -ENOMEM; + + led_set_trigger_data(led_cdev, trigger_data); + + INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work); + trigger_data->led_cdev = led_cdev; + mutex_init(&trigger_data->mutex); + + return 0; +} + +static void ledtrig_tty_deactivate(struct led_classdev *led_cdev) +{ + struct ledtrig_tty_data *trigger_data = led_get_trigger_data(led_cdev); + + cancel_delayed_work_sync(&trigger_data->dwork); + + kfree(trigger_data); +} + +static struct led_trigger ledtrig_tty = { + .name = "tty", + .activate = ledtrig_tty_activate, + .deactivate = ledtrig_tty_deactivate, + .groups = ledtrig_tty_groups, +}; +module_led_trigger(ledtrig_tty); + +MODULE_AUTHOR("Uwe Kleine-König "); +MODULE_DESCRIPTION("UART LED trigger"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index bcc14c5875bf..8215cd77301f 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -89,8 +89,7 @@ static inline void update_tty_status(struct ser_device *ser) ser->tty_status = ser->tty->stopped << 5 | ser->tty->flow_stopped << 3 | - ser->tty->packet << 2 | - ser->tty->port->low_latency << 1; + ser->tty->packet << 2; } static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty) { diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 2b66cf301b0e..2a91caa4f37b 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -259,7 +259,8 @@ static int ppp_asynctty_hangup(struct tty_struct *tty) */ static ssize_t ppp_asynctty_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t count) + unsigned char *buf, size_t count, + void **cookie, unsigned long offset) { return -EAGAIN; } diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index 86ee5149f4f2..d8890923a9e3 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -257,7 +257,8 @@ static int ppp_sync_hangup(struct tty_struct *tty) */ static ssize_t ppp_sync_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t count) + unsigned char *buf, size_t count, + void **cookie, unsigned long offset) { return -EAGAIN; } diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 1354c42d95aa..671efee612af 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -914,7 +914,6 @@ static int tty3215_open(struct tty_struct *tty, struct file * filp) tty_port_tty_set(&raw->port, tty); - raw->port.low_latency = 0; /* don't use bottom half for pushing chars */ /* * Start up 3215 device */ diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 5aff8b684eb2..013bcc331305 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -65,7 +65,6 @@ sclp_tty_open(struct tty_struct *tty, struct file *filp) { tty_port_tty_set(&sclp_port, tty); tty->driver_data = NULL; - sclp_port.low_latency = 0; return 0; } diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 3f9a6ef650fa..047f812d1a1c 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -560,7 +560,6 @@ sclp_vt220_open(struct tty_struct *tty, struct file *filp) { if (tty->count == 1) { tty_port_tty_set(&sclp_vt220_port, tty); - sclp_vt220_port.low_latency = 0; if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = 24; tty->winsize.ws_col = 80; diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index aec996de44d9..15692449a1c3 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -967,7 +967,6 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) tty->driver_data = tp; tty->winsize.ws_row = tp->view.rows - 2; tty->winsize.ws_col = tp->view.cols; - tp->port.low_latency = 0; tp->inattr = TF_INPUT; goto port_install; } @@ -996,7 +995,6 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) return rc; } - tp->port.low_latency = 0; tty->winsize.ws_row = tp->view.rows - 2; tty->winsize.ws_col = tp->view.cols; diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 13f63c01c589..18b78ea110ef 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -998,7 +998,6 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) state->custom_divisor = ss->custom_divisor; port->close_delay = ss->close_delay * HZ/100; port->closing_wait = ss->closing_wait * HZ/100; - port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: if (tty_port_initialized(port)) { @@ -1386,8 +1385,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp) tty->driver_data = info; tty->port = port; - port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - retval = startup(tty, info); if (retval) { return retval; diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 509d1042825a..c90848919644 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -605,7 +605,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd) hvcsd->todo_mask |= HVCS_QUICK_READ; spin_unlock_irqrestore(&hvcsd->lock, flags); - /* This is synch because tty->low_latency == 1 */ + /* This is synch -- FIXME :js: it is not! */ if(got) tty_flip_buffer_push(&hvcsd->port); @@ -825,9 +825,6 @@ static int hvcs_remove(struct vio_dev *dev) unsigned long flags; struct tty_struct *tty; - if (!hvcsd) - return -ENODEV; - /* By this time the vty-server won't be getting any more interrupts */ spin_lock_irqsave(&hvcsd->lock, flags); diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index 23584769fc29..6dacbc5e286c 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -101,7 +101,6 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp) tty->port.tty = linux_tty; linux_tty->driver_data = tty; - tty->port.low_latency = 1; if (tty->tty_type == TTYTYPE_MODEM) ipwireless_ppp_open(tty->network); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 3703987c4666..4203b64bccdb 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1273,7 +1273,6 @@ static int mxser_set_serial_info(struct tty_struct *tty, (ss->flags & ASYNC_FLAGS)); port->close_delay = ss->close_delay * HZ / 100; port->closing_wait = ss->closing_wait * HZ / 100; - port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (ss->baud_base != info->baud_base || ss->custom_divisor != diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c676fa89ee0b..51dafc06f541 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2559,7 +2559,8 @@ static void gsmld_write_wakeup(struct tty_struct *tty) */ static ssize_t gsmld_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) { return -EOPNOTSUPP; } diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 12557ee1edb6..1363e659dc1d 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -416,13 +416,19 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, * Returns the number of bytes returned or error code. */ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, - __u8 __user *buf, size_t nr) + __u8 *kbuf, size_t nr, + void **cookie, unsigned long offset) { struct n_hdlc *n_hdlc = tty->disc_data; int ret = 0; struct n_hdlc_buf *rbuf; DECLARE_WAITQUEUE(wait, current); + /* Is this a repeated call for an rbuf we already found earlier? */ + rbuf = *cookie; + if (rbuf) + goto have_rbuf; + add_wait_queue(&tty->read_wait, &wait); for (;;) { @@ -436,25 +442,8 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, set_current_state(TASK_INTERRUPTIBLE); rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); - if (rbuf) { - if (rbuf->count > nr) { - /* too large for caller's buffer */ - ret = -EOVERFLOW; - } else { - __set_current_state(TASK_RUNNING); - if (copy_to_user(buf, rbuf->buf, rbuf->count)) - ret = -EFAULT; - else - ret = rbuf->count; - } - - if (n_hdlc->rx_free_buf_list.count > - DEFAULT_RX_BUF_COUNT) - kfree(rbuf); - else - n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); + if (rbuf) break; - } /* no data */ if (tty_io_nonblock(tty, file)) { @@ -473,6 +462,39 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, remove_wait_queue(&tty->read_wait, &wait); __set_current_state(TASK_RUNNING); + if (!rbuf) + return ret; + *cookie = rbuf; + +have_rbuf: + /* Have we used it up entirely? */ + if (offset >= rbuf->count) + goto done_with_rbuf; + + /* More data to go, but can't copy any more? EOVERFLOW */ + ret = -EOVERFLOW; + if (!nr) + goto done_with_rbuf; + + /* Copy as much data as possible */ + ret = rbuf->count - offset; + if (ret > nr) + ret = nr; + memcpy(kbuf, rbuf->buf+offset, ret); + offset += ret; + + /* If we still have data left, we leave the rbuf in the cookie */ + if (offset < rbuf->count) + return ret; + +done_with_rbuf: + *cookie = NULL; + + if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) + kfree(rbuf); + else + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); + return ret; } /* end of n_hdlc_tty_read() */ diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c index 96feabae4740..ce03ae78f5c6 100644 --- a/drivers/tty/n_null.c +++ b/drivers/tty/n_null.c @@ -20,7 +20,8 @@ static void n_null_close(struct tty_struct *tty) } static ssize_t n_null_read(struct tty_struct *tty, struct file *file, - unsigned char __user * buf, size_t nr) + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) { return -EOPNOTSUPP; } diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 934dd2fb2ec8..3161f0a535e3 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -129,7 +129,7 @@ static void remove_client_block(struct r3964_info *pInfo, static int r3964_open(struct tty_struct *tty); static void r3964_close(struct tty_struct *tty); static ssize_t r3964_read(struct tty_struct *tty, struct file *file, - unsigned char __user * buf, size_t nr); + void *cookie, unsigned char *buf, size_t nr); static ssize_t r3964_write(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr); static int r3964_ioctl(struct tty_struct *tty, struct file *file, @@ -1058,7 +1058,8 @@ static void r3964_close(struct tty_struct *tty) } static ssize_t r3964_read(struct tty_struct *tty, struct file *file, - unsigned char __user * buf, size_t nr) + unsigned char *kbuf, size_t nr, + void **cookie, unsigned long offset) { struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; @@ -1109,10 +1110,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, kfree(pMsg); TRACE_M("r3964_read - msg kfree %p", pMsg); - if (copy_to_user(buf, &theMsg, ret)) { - ret = -EFAULT; - goto unlock; - } + memcpy(kbuf, &theMsg, ret); TRACE_PS("read - return %d", ret); goto unlock; diff --git a/drivers/tty/n_tracerouter.c b/drivers/tty/n_tracerouter.c index 4479af4d2fa5..3490ed51b1a3 100644 --- a/drivers/tty/n_tracerouter.c +++ b/drivers/tty/n_tracerouter.c @@ -118,7 +118,9 @@ static void n_tracerouter_close(struct tty_struct *tty) * -EINVAL */ static ssize_t n_tracerouter_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) { + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ return -EINVAL; } diff --git a/drivers/tty/n_tracesink.c b/drivers/tty/n_tracesink.c index d96ba82cc356..1d9931041fd8 100644 --- a/drivers/tty/n_tracesink.c +++ b/drivers/tty/n_tracesink.c @@ -115,7 +115,9 @@ static void n_tracesink_close(struct tty_struct *tty) * -EINVAL */ static ssize_t n_tracesink_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) { + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ return -EINVAL; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 219e85756171..87ec15dbe10d 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -164,29 +164,24 @@ static void zero_buffer(struct tty_struct *tty, u8 *buffer, int size) memset(buffer, 0x00, size); } -static int tty_copy_to_user(struct tty_struct *tty, void __user *to, - size_t tail, size_t n) +static void tty_copy(struct tty_struct *tty, void *to, size_t tail, size_t n) { struct n_tty_data *ldata = tty->disc_data; size_t size = N_TTY_BUF_SIZE - tail; void *from = read_buf_addr(ldata, tail); - int uncopied; if (n > size) { tty_audit_add_data(tty, from, size); - uncopied = copy_to_user(to, from, size); - zero_buffer(tty, from, size - uncopied); - if (uncopied) - return uncopied; + memcpy(to, from, size); + zero_buffer(tty, from, size); to += size; n -= size; from = ldata->read_buf; } tty_audit_add_data(tty, from, n); - uncopied = copy_to_user(to, from, n); - zero_buffer(tty, from, n - uncopied); - return uncopied; + memcpy(to, from, n); + zero_buffer(tty, from, n); } /** @@ -1894,8 +1889,10 @@ static void n_tty_close(struct tty_struct *tty) if (tty->link) n_tty_packet_mode_flush(tty); + down_write(&tty->termios_rwsem); vfree(ldata); tty->disc_data = NULL; + up_write(&tty->termios_rwsem); } /** @@ -1944,42 +1941,38 @@ static inline int input_available_p(struct tty_struct *tty, int poll) /** * copy_from_read_buf - copy read data directly * @tty: terminal device - * @b: user data + * @kbp: data * @nr: size of data * * Helper function to speed up n_tty_read. It is only called when - * ICANON is off; it copies characters straight from the tty queue to - * user space directly. It can be profitably called twice; once to - * drain the space from the tail pointer to the (physical) end of the - * buffer, and once to drain the space from the (physical) beginning of - * the buffer to head pointer. + * ICANON is off; it copies characters straight from the tty queue. * * Called under the ldata->atomic_read_lock sem * + * Returns true if it successfully copied data, but there is still + * more data to be had. + * * n_tty_read()/consumer path: * caller holds non-exclusive termios_rwsem * read_tail published */ -static int copy_from_read_buf(struct tty_struct *tty, - unsigned char __user **b, +static bool copy_from_read_buf(struct tty_struct *tty, + unsigned char **kbp, size_t *nr) { struct n_tty_data *ldata = tty->disc_data; - int retval; size_t n; bool is_eof; size_t head = smp_load_acquire(&ldata->commit_head); size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); - retval = 0; n = min(head - ldata->read_tail, N_TTY_BUF_SIZE - tail); n = min(*nr, n); if (n) { unsigned char *from = read_buf_addr(ldata, tail); - retval = copy_to_user(*b, from, n); - n -= retval; + memcpy(*kbp, from, n); is_eof = n == 1 && *from == EOF_CHAR(tty); tty_audit_add_data(tty, from, n); zero_buffer(tty, from, n); @@ -1987,22 +1980,25 @@ static int copy_from_read_buf(struct tty_struct *tty, /* Turn single EOF into zero-length read */ if (L_EXTPROC(tty) && ldata->icanon && is_eof && (head == ldata->read_tail)) - n = 0; - *b += n; + return false; + *kbp += n; *nr -= n; + + /* If we have more to copy, let the caller know */ + return head != ldata->read_tail; } - return retval; + return false; } /** * canon_copy_from_read_buf - copy read data in canonical mode * @tty: terminal device - * @b: user data + * @kbp: data * @nr: size of data * * Helper function for n_tty_read. It is only called when ICANON is on; * it copies one line of input up to and including the line-delimiting - * character into the user-space buffer. + * character into the result buffer. * * NB: When termios is changed from non-canonical to canonical mode and * the read buffer contains data, n_tty_set_termios() simulates an EOF @@ -2017,21 +2013,22 @@ static int copy_from_read_buf(struct tty_struct *tty, * read_tail published */ -static int canon_copy_from_read_buf(struct tty_struct *tty, - unsigned char __user **b, - size_t *nr) +static bool canon_copy_from_read_buf(struct tty_struct *tty, + unsigned char **kbp, + size_t *nr) { struct n_tty_data *ldata = tty->disc_data; size_t n, size, more, c; size_t eol; - size_t tail; - int ret, found = 0; + size_t tail, canon_head; + int found = 0; /* N.B. avoid overrun if nr == 0 */ if (!*nr) - return 0; + return false; - n = min(*nr + 1, smp_load_acquire(&ldata->canon_head) - ldata->read_tail); + canon_head = smp_load_acquire(&ldata->canon_head); + n = min(*nr + 1, canon_head - ldata->read_tail); tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); @@ -2061,10 +2058,8 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n", __func__, eol, found, n, c, tail, more); - ret = tty_copy_to_user(tty, *b, tail, n); - if (ret) - return -EFAULT; - *b += n; + tty_copy(tty, *kbp, tail, n); + *kbp += n; *nr -= n; if (found) @@ -2077,8 +2072,11 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, else ldata->push = 0; tty_audit_push(); + return false; } - return 0; + + /* No EOL found - do a continuation retry if there is more data */ + return ldata->read_tail != canon_head; } /** @@ -2129,10 +2127,11 @@ static int job_control(struct tty_struct *tty, struct file *file) */ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) + unsigned char *kbuf, size_t nr, + void **cookie, unsigned long offset) { struct n_tty_data *ldata = tty->disc_data; - unsigned char __user *b = buf; + unsigned char *kb = kbuf; DEFINE_WAIT_FUNC(wait, woken_wake_function); int c; int minimum, time; @@ -2141,6 +2140,30 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, int packet; size_t tail; + /* + * Is this a continuation of a read started earler? + * + * If so, we still hold the atomic_read_lock and the + * termios_rwsem, and can just continue to copy data. + */ + if (*cookie) { + if (ldata->icanon && !L_EXTPROC(tty)) { + if (canon_copy_from_read_buf(tty, &kb, &nr)) + return kb - kbuf; + } else { + if (copy_from_read_buf(tty, &kb, &nr)) + return kb - kbuf; + } + + /* No more data - release locks and stop retries */ + n_tty_kick_worker(tty); + n_tty_check_unthrottle(tty); + up_read(&tty->termios_rwsem); + mutex_unlock(&ldata->atomic_read_lock); + *cookie = NULL; + return kb - kbuf; + } + c = job_control(tty, file); if (c < 0) return c; @@ -2178,17 +2201,13 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, /* First test for status change. */ if (packet && tty->link->ctrl_status) { unsigned char cs; - if (b != buf) + if (kb != kbuf) break; spin_lock_irq(&tty->link->ctrl_lock); cs = tty->link->ctrl_status; tty->link->ctrl_status = 0; spin_unlock_irq(&tty->link->ctrl_lock); - if (put_user(cs, b)) { - retval = -EFAULT; - break; - } - b++; + *kb++ = cs; nr--; break; } @@ -2231,33 +2250,35 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } if (ldata->icanon && !L_EXTPROC(tty)) { - retval = canon_copy_from_read_buf(tty, &b, &nr); - if (retval) - break; + if (canon_copy_from_read_buf(tty, &kb, &nr)) + goto more_to_be_read; } else { - int uncopied; - /* Deal with packet mode. */ - if (packet && b == buf) { - if (put_user(TIOCPKT_DATA, b)) { - retval = -EFAULT; - break; - } - b++; + if (packet && kb == kbuf) { + *kb++ = TIOCPKT_DATA; nr--; } - uncopied = copy_from_read_buf(tty, &b, &nr); - uncopied += copy_from_read_buf(tty, &b, &nr); - if (uncopied) { - retval = -EFAULT; - break; + /* + * Copy data, and if there is more to be had + * and we have nothing more to wait for, then + * let's mark us for retries. + * + * NOTE! We return here with both the termios_sem + * and atomic_read_lock still held, the retries + * will release them when done. + */ + if (copy_from_read_buf(tty, &kb, &nr) && kb - kbuf >= minimum) { +more_to_be_read: + remove_wait_queue(&tty->read_wait, &wait); + *cookie = cookie; + return kb - kbuf; } } n_tty_check_unthrottle(tty); - if (b - buf >= minimum) + if (kb - kbuf >= minimum) break; if (time) timeout = time; @@ -2269,8 +2290,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, remove_wait_queue(&tty->read_wait, &wait); mutex_unlock(&ldata->atomic_read_lock); - if (b - buf) - retval = b - buf; + if (kb - kbuf) + retval = kb - kbuf; return retval; } diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index a59f1e062bc6..8b2797b6ee44 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -45,7 +45,6 @@ static DEFINE_MUTEX(devpts_mutex); static void pty_close(struct tty_struct *tty, struct file *filp) { - BUG_ON(!tty); if (tty->driver->subtype == PTY_TYPE_MASTER) WARN_ON(tty->count > 1); else { @@ -67,7 +66,8 @@ static void pty_close(struct tty_struct *tty, struct file *filp) wake_up_interruptible(&tty->link->read_wait); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { - set_bit(TTY_OTHER_CLOSED, &tty->flags); + struct file *f; + #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); @@ -76,7 +76,17 @@ static void pty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&devpts_mutex); } #endif - tty_vhangup(tty->link); + + /* + * This hack is required because a program can open a + * pty and redirect a console to it, but if the pty is + * closed and the console is not released, then the + * slave side will never close. So release the + * redirect when the master closes. + */ + f = tty_release_redirect(tty->link); + if (f) + fput(f); } } diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c index c0ffad1572c6..e13ae18b0713 100644 --- a/drivers/tty/serial/8250/8250_tegra.c +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -26,16 +26,17 @@ static void tegra_uart_handle_break(struct uart_port *p) { unsigned int status, tmout = 10000; - do { + while (1) { status = p->serial_in(p, UART_LSR); - if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) - status = p->serial_in(p, UART_RX); - else + if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))) break; + + p->serial_in(p, UART_RX); + if (--tmout == 0) break; udelay(1); - } while (1); + } } static int tegra_uart_probe(struct platform_device *pdev) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 34a2899e69c0..0c4cd4a348f4 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -276,28 +276,6 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_SIRFSOC - tristate "SiRF SoC Platform Serial port support" - depends on ARCH_SIRF - select SERIAL_CORE - help - Support for the on-chip UART on the CSR SiRFprimaII series, - providing /dev/ttySiRF0, 1 and 2 (note, some machines may not - provide all of these ports, depending on how the serial port - pins are configured). - -config SERIAL_SIRFSOC_CONSOLE - bool "Support for console on SiRF SoC serial port" - depends on SERIAL_SIRFSOC=y - select SERIAL_CORE_CONSOLE - help - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySiRFx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - config SERIAL_TEGRA tristate "NVIDIA Tegra20/30 SoC serial controller" depends on ARCH_TEGRA && TEGRA20_APB_DMA @@ -1204,13 +1182,6 @@ config SERIAL_ALTERA_UART_CONSOLE help Enable a Altera UART port to be the system console. -config SERIAL_IFX6X60 - tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" - depends on GPIOLIB || COMPILE_TEST - depends on SPI && HAS_DMA - help - Support for the IFX6x60 modem devices on Intel MID platforms. - config SERIAL_PCH_UART tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI && (X86_32 || MIPS || COMPILE_TEST) @@ -1295,14 +1266,6 @@ config SERIAL_AR933X_NR_UARTS Set this to the number of serial ports you want the driver to support. -config SERIAL_EFM32_UART - tristate "EFM32 UART/USART port" - depends on ARM && (ARCH_EFM32 || COMPILE_TEST) - select SERIAL_CORE - help - This driver support the USART and UART ports on - Energy Micro's efm32 SoCs. - config SERIAL_MPS2_UART_CONSOLE bool "MPS2 UART console support" depends on SERIAL_MPS2_UART @@ -1316,11 +1279,6 @@ config SERIAL_MPS2_UART help This driver support the UART ports on ARM MPS2. -config SERIAL_EFM32_UART_CONSOLE - bool "EFM32 UART/USART console support" - depends on SERIAL_EFM32_UART=y - select SERIAL_CORE_CONSOLE - config SERIAL_ARC tristate "ARC UART driver support" select SERIAL_CORE diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index b85d53f9e9ff..7da0856cd198 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -64,16 +64,13 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o -obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o -obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o -obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o obj-$(CONFIG_SERIAL_ARC) += arc_uart.o obj-$(CONFIG_SERIAL_RP2) += rp2.o obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 4df47d02b34b..58aaa533203b 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -499,8 +499,7 @@ static void cpm_uart_set_termios(struct uart_port *port, pr_debug("CPM uart[%d]:set_termios\n", port->line); baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud < HW_BUF_SPD_THRESHOLD || - (pinfo->port.state && pinfo->port.state->port.low_latency)) + if (baud < HW_BUF_SPD_THRESHOLD || port->flags & UPF_LOW_LATENCY) pinfo->rx_fifosize = 1; else pinfo->rx_fifosize = RX_BUF_SIZE; @@ -1107,6 +1106,32 @@ static void cpm_put_poll_char(struct uart_port *port, ch[0] = (char)c; cpm_uart_early_write(pinfo, ch, 1, false); } + +static struct uart_port *udbg_port; + +static void udbg_cpm_putc(char c) +{ + if (c == '\n') + cpm_put_poll_char(udbg_port, '\r'); + cpm_put_poll_char(udbg_port, c); +} + +static int udbg_cpm_getc_poll(void) +{ + int c = cpm_get_poll_char(udbg_port); + + return c == NO_POLL_CHAR ? -1 : c; +} + +static int udbg_cpm_getc(void) +{ + int c; + + while ((c = udbg_cpm_getc_poll()) == -1) + cpu_relax(); + return c; +} + #endif /* CONFIG_CONSOLE_POLL */ static const struct uart_ops cpm_uart_pops = { @@ -1237,7 +1262,10 @@ static int cpm_uart_init_port(struct device_node *np, } #ifdef CONFIG_PPC_EARLY_DEBUG_CPM - udbg_putc = NULL; +#ifdef CONFIG_CONSOLE_POLL + if (!udbg_port) +#endif + udbg_putc = NULL; #endif return cpm_uart_request_port(&pinfo->port); @@ -1358,6 +1386,15 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) uart_set_options(port, co, baud, parity, bits, flow); cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); +#ifdef CONFIG_CONSOLE_POLL + if (!udbg_port) { + udbg_port = &pinfo->port; + udbg_putc = udbg_cpm_putc; + udbg_getc = udbg_cpm_getc; + udbg_getc_poll = udbg_cpm_getc_poll; + } +#endif + return 0; } diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c deleted file mode 100644 index f12f29cf4f31..000000000000 --- a/drivers/tty/serial/efm32-uart.c +++ /dev/null @@ -1,852 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define DRIVER_NAME "efm32-uart" -#define DEV_NAME "ttyefm" - -#define UARTn_CTRL 0x00 -#define UARTn_CTRL_SYNC 0x0001 -#define UARTn_CTRL_TXBIL 0x1000 - -#define UARTn_FRAME 0x04 -#define UARTn_FRAME_DATABITS__MASK 0x000f -#define UARTn_FRAME_DATABITS(n) ((n) - 3) -#define UARTn_FRAME_PARITY__MASK 0x0300 -#define UARTn_FRAME_PARITY_NONE 0x0000 -#define UARTn_FRAME_PARITY_EVEN 0x0200 -#define UARTn_FRAME_PARITY_ODD 0x0300 -#define UARTn_FRAME_STOPBITS_HALF 0x0000 -#define UARTn_FRAME_STOPBITS_ONE 0x1000 -#define UARTn_FRAME_STOPBITS_TWO 0x3000 - -#define UARTn_CMD 0x0c -#define UARTn_CMD_RXEN 0x0001 -#define UARTn_CMD_RXDIS 0x0002 -#define UARTn_CMD_TXEN 0x0004 -#define UARTn_CMD_TXDIS 0x0008 - -#define UARTn_STATUS 0x10 -#define UARTn_STATUS_TXENS 0x0002 -#define UARTn_STATUS_TXC 0x0020 -#define UARTn_STATUS_TXBL 0x0040 -#define UARTn_STATUS_RXDATAV 0x0080 - -#define UARTn_CLKDIV 0x14 - -#define UARTn_RXDATAX 0x18 -#define UARTn_RXDATAX_RXDATA__MASK 0x01ff -#define UARTn_RXDATAX_PERR 0x4000 -#define UARTn_RXDATAX_FERR 0x8000 -/* - * This is a software only flag used for ignore_status_mask and - * read_status_mask! It's used for breaks that the hardware doesn't report - * explicitly. - */ -#define SW_UARTn_RXDATAX_BERR 0x2000 - -#define UARTn_TXDATA 0x34 - -#define UARTn_IF 0x40 -#define UARTn_IF_TXC 0x0001 -#define UARTn_IF_TXBL 0x0002 -#define UARTn_IF_RXDATAV 0x0004 -#define UARTn_IF_RXOF 0x0010 - -#define UARTn_IFS 0x44 -#define UARTn_IFC 0x48 -#define UARTn_IEN 0x4c - -#define UARTn_ROUTE 0x54 -#define UARTn_ROUTE_LOCATION__MASK 0x0700 -#define UARTn_ROUTE_LOCATION(n) (((n) << 8) & UARTn_ROUTE_LOCATION__MASK) -#define UARTn_ROUTE_RXPEN 0x0001 -#define UARTn_ROUTE_TXPEN 0x0002 - -struct efm32_uart_port { - struct uart_port port; - unsigned int txirq; - struct clk *clk; - struct efm32_uart_pdata pdata; -}; -#define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port) -#define efm_debug(efm_port, format, arg...) \ - dev_dbg(efm_port->port.dev, format, ##arg) - -static void efm32_uart_write32(struct efm32_uart_port *efm_port, - u32 value, unsigned offset) -{ - writel_relaxed(value, efm_port->port.membase + offset); -} - -static u32 efm32_uart_read32(struct efm32_uart_port *efm_port, - unsigned offset) -{ - return readl_relaxed(efm_port->port.membase + offset); -} - -static unsigned int efm32_uart_tx_empty(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); - - if (status & UARTn_STATUS_TXC) - return TIOCSER_TEMT; - else - return 0; -} - -static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* sorry, neither handshaking lines nor loop functionallity */ -} - -static unsigned int efm32_uart_get_mctrl(struct uart_port *port) -{ - /* sorry, no handshaking lines available */ - return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; -} - -static void efm32_uart_stop_tx(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - u32 ien = efm32_uart_read32(efm_port, UARTn_IEN); - - efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); - ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL); - efm32_uart_write32(efm_port, ien, UARTn_IEN); -} - -static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port) -{ - struct uart_port *port = &efm_port->port; - struct circ_buf *xmit = &port->state->xmit; - - while (efm32_uart_read32(efm_port, UARTn_STATUS) & - UARTn_STATUS_TXBL) { - if (port->x_char) { - port->icount.tx++; - efm32_uart_write32(efm_port, port->x_char, - UARTn_TXDATA); - port->x_char = 0; - continue; - } - if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { - port->icount.tx++; - efm32_uart_write32(efm_port, xmit->buf[xmit->tail], - UARTn_TXDATA); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!port->x_char && uart_circ_empty(xmit) && - efm32_uart_read32(efm_port, UARTn_STATUS) & - UARTn_STATUS_TXC) - efm32_uart_stop_tx(port); -} - -static void efm32_uart_start_tx(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - u32 ien; - - efm32_uart_write32(efm_port, - UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC); - ien = efm32_uart_read32(efm_port, UARTn_IEN); - efm32_uart_write32(efm_port, - ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN); - efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); - - efm32_uart_tx_chars(efm_port); -} - -static void efm32_uart_stop_rx(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - - efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD); -} - -static void efm32_uart_break_ctl(struct uart_port *port, int ctl) -{ - /* not possible without fiddling with gpios */ -} - -static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port) -{ - struct uart_port *port = &efm_port->port; - - while (efm32_uart_read32(efm_port, UARTn_STATUS) & - UARTn_STATUS_RXDATAV) { - u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX); - int flag = 0; - - /* - * This is a reserved bit and I only saw it read as 0. But to be - * sure not to be confused too much by new devices adhere to the - * warning in the reference manual that reserved bits might - * read as 1 in the future. - */ - rxdata &= ~SW_UARTn_RXDATAX_BERR; - - port->icount.rx++; - - if ((rxdata & UARTn_RXDATAX_FERR) && - !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) { - rxdata |= SW_UARTn_RXDATAX_BERR; - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (rxdata & UARTn_RXDATAX_PERR) - port->icount.parity++; - else if (rxdata & UARTn_RXDATAX_FERR) - port->icount.frame++; - - rxdata &= port->read_status_mask; - - if (rxdata & SW_UARTn_RXDATAX_BERR) - flag = TTY_BREAK; - else if (rxdata & UARTn_RXDATAX_PERR) - flag = TTY_PARITY; - else if (rxdata & UARTn_RXDATAX_FERR) - flag = TTY_FRAME; - else if (uart_handle_sysrq_char(port, - rxdata & UARTn_RXDATAX_RXDATA__MASK)) - continue; - - if ((rxdata & port->ignore_status_mask) == 0) - tty_insert_flip_char(&port->state->port, - rxdata & UARTn_RXDATAX_RXDATA__MASK, flag); - } -} - -static irqreturn_t efm32_uart_rxirq(int irq, void *data) -{ - struct efm32_uart_port *efm_port = data; - u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); - int handled = IRQ_NONE; - struct uart_port *port = &efm_port->port; - struct tty_port *tport = &port->state->port; - - spin_lock(&port->lock); - - if (irqflag & UARTn_IF_RXDATAV) { - efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC); - efm32_uart_rx_chars(efm_port); - - handled = IRQ_HANDLED; - } - - if (irqflag & UARTn_IF_RXOF) { - efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC); - port->icount.overrun++; - tty_insert_flip_char(tport, 0, TTY_OVERRUN); - - handled = IRQ_HANDLED; - } - - spin_unlock(&port->lock); - - tty_flip_buffer_push(tport); - - return handled; -} - -static irqreturn_t efm32_uart_txirq(int irq, void *data) -{ - struct efm32_uart_port *efm_port = data; - u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); - - /* TXBL doesn't need to be cleared */ - if (irqflag & UARTn_IF_TXC) - efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC); - - if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) { - efm32_uart_tx_chars(efm_port); - return IRQ_HANDLED; - } else - return IRQ_NONE; -} - -static int efm32_uart_startup(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - int ret; - - ret = clk_enable(efm_port->clk); - if (ret) { - efm_debug(efm_port, "failed to enable clk\n"); - goto err_clk_enable; - } - port->uartclk = clk_get_rate(efm_port->clk); - - /* Enable pins at configured location */ - efm32_uart_write32(efm_port, - UARTn_ROUTE_LOCATION(efm_port->pdata.location) | - UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN, - UARTn_ROUTE); - - ret = request_irq(port->irq, efm32_uart_rxirq, 0, - DRIVER_NAME, efm_port); - if (ret) { - efm_debug(efm_port, "failed to register rxirq\n"); - goto err_request_irq_rx; - } - - /* disable all irqs */ - efm32_uart_write32(efm_port, 0, UARTn_IEN); - - ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0, - DRIVER_NAME, efm_port); - if (ret) { - efm_debug(efm_port, "failed to register txirq\n"); - free_irq(port->irq, efm_port); -err_request_irq_rx: - - clk_disable(efm_port->clk); - } else { - efm32_uart_write32(efm_port, - UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN); - efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD); - } - -err_clk_enable: - return ret; -} - -static void efm32_uart_shutdown(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - - efm32_uart_write32(efm_port, 0, UARTn_IEN); - free_irq(port->irq, efm_port); - - clk_disable(efm_port->clk); -} - -static void efm32_uart_set_termios(struct uart_port *port, - struct ktermios *new, struct ktermios *old) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - unsigned long flags; - unsigned baud; - u32 clkdiv; - u32 frame = 0; - - /* no modem control lines */ - new->c_cflag &= ~(CRTSCTS | CMSPAR); - - baud = uart_get_baud_rate(port, new, old, - DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192), - DIV_ROUND_CLOSEST(port->uartclk, 16)); - - switch (new->c_cflag & CSIZE) { - case CS5: - frame |= UARTn_FRAME_DATABITS(5); - break; - case CS6: - frame |= UARTn_FRAME_DATABITS(6); - break; - case CS7: - frame |= UARTn_FRAME_DATABITS(7); - break; - case CS8: - frame |= UARTn_FRAME_DATABITS(8); - break; - } - - if (new->c_cflag & CSTOPB) - /* the receiver only verifies the first stop bit */ - frame |= UARTn_FRAME_STOPBITS_TWO; - else - frame |= UARTn_FRAME_STOPBITS_ONE; - - if (new->c_cflag & PARENB) { - if (new->c_cflag & PARODD) - frame |= UARTn_FRAME_PARITY_ODD; - else - frame |= UARTn_FRAME_PARITY_EVEN; - } else - frame |= UARTn_FRAME_PARITY_NONE; - - /* - * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25. - * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow. - */ - clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6; - - spin_lock_irqsave(&port->lock, flags); - - efm32_uart_write32(efm_port, - UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD); - - port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK; - if (new->c_iflag & INPCK) - port->read_status_mask |= - UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; - if (new->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= SW_UARTn_RXDATAX_BERR; - - port->ignore_status_mask = 0; - if (new->c_iflag & IGNPAR) - port->ignore_status_mask |= - UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; - if (new->c_iflag & IGNBRK) - port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR; - - uart_update_timeout(port, new->c_cflag, baud); - - efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL); - efm32_uart_write32(efm_port, frame, UARTn_FRAME); - efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV); - - efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN, - UARTn_CMD); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *efm32_uart_type(struct uart_port *port) -{ - return port->type == PORT_EFMUART ? "efm32-uart" : NULL; -} - -static void efm32_uart_release_port(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - - clk_unprepare(efm_port->clk); - clk_put(efm_port->clk); - iounmap(port->membase); -} - -static int efm32_uart_request_port(struct uart_port *port) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - int ret; - - port->membase = ioremap(port->mapbase, 60); - if (!efm_port->port.membase) { - ret = -ENOMEM; - efm_debug(efm_port, "failed to remap\n"); - goto err_ioremap; - } - - efm_port->clk = clk_get(port->dev, NULL); - if (IS_ERR(efm_port->clk)) { - ret = PTR_ERR(efm_port->clk); - efm_debug(efm_port, "failed to get clock\n"); - goto err_clk_get; - } - - ret = clk_prepare(efm_port->clk); - if (ret) { - clk_put(efm_port->clk); -err_clk_get: - - iounmap(port->membase); -err_ioremap: - return ret; - } - return 0; -} - -static void efm32_uart_config_port(struct uart_port *port, int type) -{ - if (type & UART_CONFIG_TYPE && - !efm32_uart_request_port(port)) - port->type = PORT_EFMUART; -} - -static int efm32_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - int ret = 0; - - if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART) - ret = -EINVAL; - - return ret; -} - -static const struct uart_ops efm32_uart_pops = { - .tx_empty = efm32_uart_tx_empty, - .set_mctrl = efm32_uart_set_mctrl, - .get_mctrl = efm32_uart_get_mctrl, - .stop_tx = efm32_uart_stop_tx, - .start_tx = efm32_uart_start_tx, - .stop_rx = efm32_uart_stop_rx, - .break_ctl = efm32_uart_break_ctl, - .startup = efm32_uart_startup, - .shutdown = efm32_uart_shutdown, - .set_termios = efm32_uart_set_termios, - .type = efm32_uart_type, - .release_port = efm32_uart_release_port, - .request_port = efm32_uart_request_port, - .config_port = efm32_uart_config_port, - .verify_port = efm32_uart_verify_port, -}; - -static struct efm32_uart_port *efm32_uart_ports[5]; - -#ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE -static void efm32_uart_console_putchar(struct uart_port *port, int ch) -{ - struct efm32_uart_port *efm_port = to_efm_port(port); - unsigned int timeout = 0x400; - u32 status; - - while (1) { - status = efm32_uart_read32(efm_port, UARTn_STATUS); - - if (status & UARTn_STATUS_TXBL) - break; - if (!timeout--) - return; - } - efm32_uart_write32(efm_port, ch, UARTn_TXDATA); -} - -static void efm32_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct efm32_uart_port *efm_port = efm32_uart_ports[co->index]; - u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); - unsigned int timeout = 0x400; - - if (!(status & UARTn_STATUS_TXENS)) - efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); - - uart_console_write(&efm_port->port, s, count, - efm32_uart_console_putchar); - - /* Wait for the transmitter to become empty */ - while (1) { - u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); - if (status & UARTn_STATUS_TXC) - break; - if (!timeout--) - break; - } - - if (!(status & UARTn_STATUS_TXENS)) - efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); -} - -static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port, - int *baud, int *parity, int *bits) -{ - u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL); - u32 route, clkdiv, frame; - - if (ctrl & UARTn_CTRL_SYNC) - /* not operating in async mode */ - return; - - route = efm32_uart_read32(efm_port, UARTn_ROUTE); - if (!(route & UARTn_ROUTE_TXPEN)) - /* tx pin not routed */ - return; - - clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV); - - *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk, - 16 * (4 + (clkdiv >> 6))); - - frame = efm32_uart_read32(efm_port, UARTn_FRAME); - switch (frame & UARTn_FRAME_PARITY__MASK) { - case UARTn_FRAME_PARITY_ODD: - *parity = 'o'; - break; - case UARTn_FRAME_PARITY_EVEN: - *parity = 'e'; - break; - default: - *parity = 'n'; - } - - *bits = (frame & UARTn_FRAME_DATABITS__MASK) - - UARTn_FRAME_DATABITS(4) + 4; - - efm_debug(efm_port, "get_opts: options=%d%c%d\n", - *baud, *parity, *bits); -} - -static int efm32_uart_console_setup(struct console *co, char *options) -{ - struct efm32_uart_port *efm_port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) { - unsigned i; - for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) { - if (efm32_uart_ports[i]) { - pr_warn("efm32-console: fall back to console index %u (from %hhi)\n", - i, co->index); - co->index = i; - break; - } - } - } - - efm_port = efm32_uart_ports[co->index]; - if (!efm_port) { - pr_warn("efm32-console: No port at %d\n", co->index); - return -ENODEV; - } - - ret = clk_prepare(efm_port->clk); - if (ret) { - dev_warn(efm_port->port.dev, - "console: clk_prepare failed: %d\n", ret); - return ret; - } - - efm_port->port.uartclk = clk_get_rate(efm_port->clk); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - efm32_uart_console_get_options(efm_port, - &baud, &parity, &bits); - - return uart_set_options(&efm_port->port, co, baud, parity, bits, flow); -} - -static struct uart_driver efm32_uart_reg; - -static struct console efm32_uart_console = { - .name = DEV_NAME, - .write = efm32_uart_console_write, - .device = uart_console_device, - .setup = efm32_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &efm32_uart_reg, -}; - -#else -#define efm32_uart_console (*(struct console *)NULL) -#endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */ - -static struct uart_driver efm32_uart_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = DEV_NAME, - .nr = ARRAY_SIZE(efm32_uart_ports), - .cons = &efm32_uart_console, -}; - -static int efm32_uart_probe_dt(struct platform_device *pdev, - struct efm32_uart_port *efm_port) -{ - struct device_node *np = pdev->dev.of_node; - u32 location; - int ret; - - if (!np) - return 1; - - ret = of_property_read_u32(np, "energymicro,location", &location); - - if (ret) - /* fall back to wrongly namespaced property */ - ret = of_property_read_u32(np, "efm32,location", &location); - - if (ret) - /* fall back to old and (wrongly) generic property "location" */ - ret = of_property_read_u32(np, "location", &location); - - if (!ret) { - if (location > 5) { - dev_err(&pdev->dev, "invalid location\n"); - return -EINVAL; - } - efm_debug(efm_port, "using location %u\n", location); - efm_port->pdata.location = location; - } else { - efm_debug(efm_port, "fall back to location 0\n"); - } - - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); - return ret; - } else { - efm_port->port.line = ret; - return 0; - } - -} - -static int efm32_uart_probe(struct platform_device *pdev) -{ - struct efm32_uart_port *efm_port; - struct resource *res; - unsigned int line; - int ret; - - efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL); - if (!efm_port) { - dev_dbg(&pdev->dev, "failed to allocate private data\n"); - return -ENOMEM; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - dev_dbg(&pdev->dev, "failed to determine base address\n"); - goto err_get_base; - } - - if (resource_size(res) < 60) { - ret = -EINVAL; - dev_dbg(&pdev->dev, "memory resource too small\n"); - goto err_too_small; - } - - ret = platform_get_irq(pdev, 0); - if (ret <= 0) { - dev_dbg(&pdev->dev, "failed to get rx irq\n"); - goto err_get_rxirq; - } - - efm_port->port.irq = ret; - - ret = platform_get_irq(pdev, 1); - if (ret <= 0) - ret = efm_port->port.irq + 1; - - efm_port->txirq = ret; - - efm_port->port.dev = &pdev->dev; - efm_port->port.mapbase = res->start; - efm_port->port.type = PORT_EFMUART; - efm_port->port.iotype = UPIO_MEM32; - efm_port->port.fifosize = 2; - efm_port->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_EFM32_UART_CONSOLE); - efm_port->port.ops = &efm32_uart_pops; - efm_port->port.flags = UPF_BOOT_AUTOCONF; - - ret = efm32_uart_probe_dt(pdev, efm_port); - if (ret > 0) { - /* not created by device tree */ - const struct efm32_uart_pdata *pdata = dev_get_platdata(&pdev->dev); - - efm_port->port.line = pdev->id; - - if (pdata) - efm_port->pdata = *pdata; - } else if (ret < 0) - goto err_probe_dt; - - line = efm_port->port.line; - - if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[line] = efm_port; - - ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port); - if (ret) { - dev_dbg(&pdev->dev, "failed to add port: %d\n", ret); - - if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[line] = NULL; -err_probe_dt: -err_get_rxirq: -err_too_small: -err_get_base: - kfree(efm_port); - } else { - platform_set_drvdata(pdev, efm_port); - dev_dbg(&pdev->dev, "\\o/\n"); - } - - return ret; -} - -static int efm32_uart_remove(struct platform_device *pdev) -{ - struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); - unsigned int line = efm_port->port.line; - - uart_remove_one_port(&efm32_uart_reg, &efm_port->port); - - if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) - efm32_uart_ports[line] = NULL; - - kfree(efm_port); - - return 0; -} - -static const struct of_device_id efm32_uart_dt_ids[] = { - { - .compatible = "energymicro,efm32-uart", - }, { - /* doesn't follow the "vendor,device" scheme, don't use */ - .compatible = "efm32,uart", - }, { - /* sentinel */ - } -}; -MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids); - -static struct platform_driver efm32_uart_driver = { - .probe = efm32_uart_probe, - .remove = efm32_uart_remove, - - .driver = { - .name = DRIVER_NAME, - .of_match_table = efm32_uart_dt_ids, - }, -}; - -static int __init efm32_uart_init(void) -{ - int ret; - - ret = uart_register_driver(&efm32_uart_reg); - if (ret) - return ret; - - ret = platform_driver_register(&efm32_uart_driver); - if (ret) - uart_unregister_driver(&efm32_uart_reg); - - pr_info("EFM32 UART/USART driver\n"); - - return ret; -} -module_init(efm32_uart_init); - -static void __exit efm32_uart_exit(void) -{ - platform_driver_unregister(&efm32_uart_driver); - uart_unregister_driver(&efm32_uart_reg); -} -module_exit(efm32_uart_exit); - -MODULE_AUTHOR("Uwe Kleine-Koenig "); -MODULE_DESCRIPTION("EFM32 UART/USART driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index bd047e1f9bea..794035041744 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2580,9 +2580,7 @@ static struct uart_driver lpuart_reg = { static int lpuart_probe(struct platform_device *pdev) { - const struct of_device_id *of_id = of_match_device(lpuart_dt_ids, - &pdev->dev); - const struct lpuart_soc_data *sdata = of_id->data; + const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev); struct device_node *np = pdev->dev.of_node; struct lpuart_port *sport; struct resource *res; diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 94c8281ddb5f..9a872750581c 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -118,7 +118,7 @@ MODULE_DEVICE_TABLE(pci, icom_pci_table); static LIST_HEAD(icom_adapter_head); /* spinlock for adapter initialization and changing adapter operations */ -static spinlock_t icom_lock; +static DEFINE_SPINLOCK(icom_lock); #ifdef ICOM_TRACE static inline void trace(struct icom_port *icom_port, char *trace_pt, @@ -1616,8 +1616,6 @@ static int __init icom_init(void) { int ret; - spin_lock_init(&icom_lock); - ret = uart_register_driver(&icom_uart_driver); if (ret) return ret; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c deleted file mode 100644 index 182e0ccd60b2..000000000000 --- a/drivers/tty/serial/ifx6x60.c +++ /dev/null @@ -1,1390 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/**************************************************************************** - * - * Driver for the IFX 6x60 spi modem. - * - * Copyright (C) 2008 Option International - * Copyright (C) 2008 Filip Aben - * Denis Joseph Barrow - * Jan Dumon - * - * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby - * - * Driver modified by Intel from Option gtm501l_spi.c - * - * Notes - * o The driver currently assumes a single device only. If you need to - * change this then look for saved_ifx_dev and add a device lookup - * o The driver is intended to be big-endian safe but has never been - * tested that way (no suitable hardware). There are a couple of FIXME - * notes by areas that may need addressing - * o Some of the GPIO naming/setup assumptions may need revisiting if - * you need to use this driver for another platform. - * - *****************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ifx6x60.h" - -#define IFX_SPI_MORE_MASK 0x10 -#define IFX_SPI_MORE_BIT 4 /* bit position in u8 */ -#define IFX_SPI_CTS_BIT 6 /* bit position in u8 */ -#define IFX_SPI_MODE SPI_MODE_1 -#define IFX_SPI_TTY_ID 0 -#define IFX_SPI_TIMEOUT_SEC 2 -#define IFX_SPI_HEADER_0 (-1) -#define IFX_SPI_HEADER_F (-2) - -#define PO_POST_DELAY 200 - -/* forward reference */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); -static int ifx_modem_reboot_callback(struct notifier_block *nfb, - unsigned long event, void *data); -static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev); - -/* local variables */ -static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ -static struct tty_driver *tty_drv; -static struct ifx_spi_device *saved_ifx_dev; -static struct lock_class_key ifx_spi_key; - -static struct notifier_block ifx_modem_reboot_notifier_block = { - .notifier_call = ifx_modem_reboot_callback, -}; - -static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev) -{ - gpiod_set_value(ifx_dev->gpio.pmu_reset, 1); - msleep(PO_POST_DELAY); - - return 0; -} - -static int ifx_modem_reboot_callback(struct notifier_block *nfb, - unsigned long event, void *data) -{ - if (saved_ifx_dev) - ifx_modem_power_off(saved_ifx_dev); - else - pr_warn("no ifx modem active;\n"); - - return NOTIFY_OK; -} - -/* GPIO/GPE settings */ - -/** - * mrdy_set_high - set MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_high(struct ifx_spi_device *ifx) -{ - gpiod_set_value(ifx->gpio.mrdy, 1); -} - -/** - * mrdy_set_low - clear MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_low(struct ifx_spi_device *ifx) -{ - gpiod_set_value(ifx->gpio.mrdy, 0); -} - -/** - * ifx_spi_power_state_set - * @ifx_dev: our SPI device - * @val: bits to set - * - * Set bit in power status and signal power system if status becomes non-0 - */ -static void -ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - /* - * if power status is already non-0, just update, else - * tell power system - */ - if (!ifx_dev->power_status) - pm_runtime_get(&ifx_dev->spi_dev->dev); - ifx_dev->power_status |= val; - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * ifx_spi_power_state_clear - clear power bit - * @ifx_dev: our SPI device - * @val: bits to clear - * - * clear bit in power status and signal power system if status becomes 0 - */ -static void -ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - if (ifx_dev->power_status) { - ifx_dev->power_status &= ~val; - if (!ifx_dev->power_status) - pm_runtime_put(&ifx_dev->spi_dev->dev); - } - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * swap_buf_8 - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf_8(unsigned char *buf, int len, void *end) -{ - /* don't swap buffer if SPI word width is 8 bits */ - return; -} - -/** - * swap_buf_16 - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf_16(unsigned char *buf, int len, void *end) -{ - int n; - - u16 *buf_16 = (u16 *)buf; - len = ((len + 1) >> 1); - if ((void *)&buf_16[len] > end) { - pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!", - &buf_16[len], end); - return; - } - for (n = 0; n < len; n++) { - *buf_16 = cpu_to_be16(*buf_16); - buf_16++; - } -} - -/** - * swap_buf_32 - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf_32(unsigned char *buf, int len, void *end) -{ - int n; - - u32 *buf_32 = (u32 *)buf; - len = (len + 3) >> 2; - - if ((void *)&buf_32[len] > end) { - pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n", - &buf_32[len], end); - return; - } - for (n = 0; n < len; n++) { - *buf_32 = cpu_to_be32(*buf_32); - buf_32++; - } -} - -/** - * mrdy_assert - assert MRDY line - * @ifx_dev: our SPI device - * - * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low - * now. - * - * FIXME: Can SRDY even go high as we are running this code ? - */ -static void mrdy_assert(struct ifx_spi_device *ifx_dev) -{ - int val = gpiod_get_value(ifx_dev->gpio.srdy); - if (!val) { - if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, - &ifx_dev->flags)) { - mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ); - - } - } - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); - mrdy_set_high(ifx_dev); -} - -/** - * ifx_spi_timeout - SPI timeout - * @t: timer in our SPI device - * - * The SPI has timed out: hang up the tty. Users will then see a hangup - * and error events. - */ -static void ifx_spi_timeout(struct timer_list *t) -{ - struct ifx_spi_device *ifx_dev = from_timer(ifx_dev, t, spi_timer); - - dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); - tty_port_tty_hangup(&ifx_dev->tty_port, false); - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); -} - -/* char/tty operations */ - -/** - * ifx_spi_tiocmget - get modem lines - * @tty: our tty device - * - * Map the signal state into Linux modem flags and report the value - * in Linux terms - */ -static int ifx_spi_tiocmget(struct tty_struct *tty) -{ - unsigned int value; - struct ifx_spi_device *ifx_dev = tty->driver_data; - - value = - (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | - (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | - (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | - (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | - (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | - (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); - return value; -} - -/** - * ifx_spi_tiocmset - set modem bits - * @tty: the tty structure - * @set: bits to set - * @clear: bits to clear - * - * The IFX6x60 only supports DTR and RTS. Set them accordingly - * and flag that an update to the modem is needed. - * - * FIXME: do we need to kick the tranfers when we do this ? - */ -static int ifx_spi_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - - if (set & TIOCM_RTS) - set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (set & TIOCM_DTR) - set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - if (clear & TIOCM_RTS) - clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (clear & TIOCM_DTR) - clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - - set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); - return 0; -} - -/** - * ifx_spi_open - called on tty open - * @tty: our tty device - * @filp: file handle being associated with the tty - * - * Open the tty interface. We let the tty_port layer do all the work - * for us. - * - * FIXME: Remove single device assumption and saved_ifx_dev - */ -static int ifx_spi_open(struct tty_struct *tty, struct file *filp) -{ - return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); -} - -/** - * ifx_spi_close - called when our tty closes - * @tty: the tty being closed - * @filp: the file handle being closed - * - * Perform the close of the tty. We use the tty_port layer to do all - * our hard work. - */ -static void ifx_spi_close(struct tty_struct *tty, struct file *filp) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_close(&ifx_dev->tty_port, tty, filp); - /* FIXME: should we do an ifx_spi_reset here ? */ -} - -/** - * ifx_decode_spi_header - decode received header - * @buffer: the received data - * @length: decoded length - * @more: decoded more flag - * @received_cts: status of cts we received - * - * Note how received_cts is handled -- if header is all F it is left - * the same as it was, if header is all 0 it is set to 0 otherwise it is - * taken from the incoming header. - * - * FIXME: endianness - */ -static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, - unsigned char *more, unsigned char *received_cts) -{ - u16 h1; - u16 h2; - u16 *in_buffer = (u16 *)buffer; - - h1 = *in_buffer; - h2 = *(in_buffer+1); - - if (h1 == 0 && h2 == 0) { - *received_cts = 0; - *more = 0; - return IFX_SPI_HEADER_0; - } else if (h1 == 0xffff && h2 == 0xffff) { - *more = 0; - /* spi_slave_cts remains as it was */ - return IFX_SPI_HEADER_F; - } - - *length = h1 & 0xfff; /* upper bits of byte are flags */ - *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; - *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; - return 0; -} - -/** - * ifx_setup_spi_header - set header fields - * @txbuffer: pointer to start of SPI buffer - * @tx_count: bytes - * @more: indicate if more to follow - * - * Format up an SPI header for a transfer - * - * FIXME: endianness? - */ -static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, - unsigned char more) -{ - *(u16 *)(txbuffer) = tx_count; - *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; - txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; -} - -/** - * ifx_spi_prepare_tx_buffer - prepare transmit frame - * @ifx_dev: our SPI device - * - * The transmit buffr needs a header and various other bits of - * information followed by as much data as we can pull from the FIFO - * and transfer. This function formats up a suitable buffer in the - * ifx_dev->tx_buffer - * - * FIXME: performance - should we wake the tty when the queue is half - * empty ? - */ -static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) -{ - int temp_count; - int queue_length; - int tx_count; - unsigned char *tx_buffer; - - tx_buffer = ifx_dev->tx_buffer; - - /* make room for required SPI header */ - tx_buffer += IFX_SPI_HEADER_OVERHEAD; - tx_count = IFX_SPI_HEADER_OVERHEAD; - - /* clear to signal no more data if this turns out to be the - * last buffer sent in a sequence */ - ifx_dev->spi_more = 0; - - /* if modem cts is set, just send empty buffer */ - if (!ifx_dev->spi_slave_cts) { - /* see if there's tx data */ - queue_length = kfifo_len(&ifx_dev->tx_fifo); - if (queue_length != 0) { - /* data to mux -- see if there's room for it */ - temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); - temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, - tx_buffer, temp_count, - &ifx_dev->fifo_lock); - - /* update buffer pointer and data count in message */ - tx_buffer += temp_count; - tx_count += temp_count; - if (temp_count == queue_length) - /* poke port to get more data */ - tty_port_tty_wakeup(&ifx_dev->tty_port); - else /* more data in port, use next SPI message */ - ifx_dev->spi_more = 1; - } - } - /* have data and info for header -- set up SPI header in buffer */ - /* spi header needs payload size, not entire buffer size */ - ifx_spi_setup_spi_header(ifx_dev->tx_buffer, - tx_count-IFX_SPI_HEADER_OVERHEAD, - ifx_dev->spi_more); - /* swap actual data in the buffer */ - ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count, - &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); - return tx_count; -} - -/** - * ifx_spi_write - line discipline write - * @tty: our tty device - * @buf: pointer to buffer to write (kernel space) - * @count: size of buffer - * - * Write the characters we have been given into the FIFO. If the device - * is not active then activate it, when the SRDY line is asserted back - * this will commence I/O - */ -static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - unsigned char *tmp_buf = (unsigned char *)buf; - unsigned long flags; - bool is_fifo_empty; - int tx_count; - - spin_lock_irqsave(&ifx_dev->fifo_lock, flags); - is_fifo_empty = kfifo_is_empty(&ifx_dev->tx_fifo); - tx_count = kfifo_in(&ifx_dev->tx_fifo, tmp_buf, count); - spin_unlock_irqrestore(&ifx_dev->fifo_lock, flags); - if (is_fifo_empty) - mrdy_assert(ifx_dev); - - return tx_count; -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how much data we can accept before we drop bytes. As we use - * a simple FIFO this is nice and easy. - */ -static int ifx_spi_write_room(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how many characters we have buffered. In our case this is the - * number of bytes sitting in our transmit FIFO. - */ -static int ifx_spi_chars_in_buffer(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_port_hangup - * @tty: our tty - * - * tty port hang up. Called when tty_hangup processing is invoked either - * by loss of carrier, or by software (eg vhangup). Serialized against - * activate/shutdown by the tty layer. - */ -static void ifx_spi_hangup(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_hangup(&ifx_dev->tty_port); -} - -/** - * ifx_port_activate - * @port: our tty port - * @tty: our tty device - * - * tty port activate method - called for first open. Serialized - * with hangup and shutdown by the tty layer. - */ -static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - /* clear any old data; can't do this in 'close' */ - kfifo_reset(&ifx_dev->tx_fifo); - - /* clear any flag which may be set in port shutdown procedure */ - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); - clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); - - /* put port data into this tty */ - tty->driver_data = ifx_dev; - - /* allows flip string push from int context */ - port->low_latency = 1; - - /* set flag to allows data transfer */ - set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); - - return 0; -} - -/** - * ifx_port_shutdown - * @port: our tty port - * - * tty port shutdown method - called for last port close. Serialized - * with hangup and activate by the tty layer. - */ -static void ifx_port_shutdown(struct tty_port *port) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); - mrdy_set_low(ifx_dev); - del_timer(&ifx_dev->spi_timer); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - tasklet_kill(&ifx_dev->io_work_tasklet); -} - -static const struct tty_port_operations ifx_tty_port_ops = { - .activate = ifx_port_activate, - .shutdown = ifx_port_shutdown, -}; - -static const struct tty_operations ifx_spi_serial_ops = { - .open = ifx_spi_open, - .close = ifx_spi_close, - .write = ifx_spi_write, - .hangup = ifx_spi_hangup, - .write_room = ifx_spi_write_room, - .chars_in_buffer = ifx_spi_chars_in_buffer, - .tiocmget = ifx_spi_tiocmget, - .tiocmset = ifx_spi_tiocmset, -}; - -/** - * ifx_spi_insert_fip_string - queue received data - * @ifx_dev: our SPI device - * @chars: buffer we have received - * @size: number of chars reeived - * - * Queue bytes to the tty assuming the tty side is currently open. If - * not the discard the data. - */ -static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, - unsigned char *chars, size_t size) -{ - tty_insert_flip_string(&ifx_dev->tty_port, chars, size); - tty_flip_buffer_push(&ifx_dev->tty_port); -} - -/** - * ifx_spi_complete - SPI transfer completed - * @ctx: our SPI device - * - * An SPI transfer has completed. Process any received data and kick off - * any further transmits we can commence. - */ -static void ifx_spi_complete(void *ctx) -{ - struct ifx_spi_device *ifx_dev = ctx; - int length; - int actual_length; - unsigned char more = 0; - unsigned char cts; - int local_write_pending = 0; - int queue_length; - int srdy; - int decode_result; - - mrdy_set_low(ifx_dev); - - if (!ifx_dev->spi_msg.status) { - /* check header validity, get comm flags */ - ifx_dev->swap_buf(ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, - &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); - decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, - &length, &more, &cts); - if (decode_result == IFX_SPI_HEADER_0) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header 0"); - ifx_dev->spi_slave_cts = 0; - goto complete_exit; - } else if (decode_result == IFX_SPI_HEADER_F) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header F"); - goto complete_exit; - } - - ifx_dev->spi_slave_cts = cts; - - actual_length = min((unsigned int)length, - ifx_dev->spi_msg.actual_length); - ifx_dev->swap_buf( - (ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), - actual_length, - &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); - ifx_spi_insert_flip_string( - ifx_dev, - ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, - (size_t)actual_length); - } else { - more = 0; - dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", - ifx_dev->spi_msg.status); - } - -complete_exit: - if (ifx_dev->write_pending) { - ifx_dev->write_pending = 0; - local_write_pending = 1; - } - - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); - - queue_length = kfifo_len(&ifx_dev->tx_fifo); - srdy = gpiod_get_value(ifx_dev->gpio.srdy); - if (!srdy) - ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); - - /* schedule output if there is more to do */ - if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else { - if (more || ifx_dev->spi_more || queue_length > 0 || - local_write_pending) { - if (ifx_dev->spi_slave_cts) { - if (more) - mrdy_assert(ifx_dev); - } else - mrdy_assert(ifx_dev); - } else { - /* - * poke line discipline driver if any for more data - * may or may not get more data to write - * for now, say not busy - */ - ifx_spi_power_state_clear(ifx_dev, - IFX_SPI_POWER_DATA_PENDING); - tty_port_tty_wakeup(&ifx_dev->tty_port); - } - } -} - -/** - * ifx_spio_io - I/O tasklet - * @t: tasklet construct used to fetch the SPI device - * - * Queue data for transmission if possible and then kick off the - * transfer. - */ -static void ifx_spi_io(struct tasklet_struct *t) -{ - int retval; - struct ifx_spi_device *ifx_dev = from_tasklet(ifx_dev, t, - io_work_tasklet); - - if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags) && - test_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags)) { - if (ifx_dev->gpio.unack_srdy_int_nb > 0) - ifx_dev->gpio.unack_srdy_int_nb--; - - ifx_spi_prepare_tx_buffer(ifx_dev); - - spi_message_init(&ifx_dev->spi_msg); - INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); - - ifx_dev->spi_msg.context = ifx_dev; - ifx_dev->spi_msg.complete = ifx_spi_complete; - - /* set up our spi transfer */ - /* note len is BYTES, not transfers */ - ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; - ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; - /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = - ifx_dev->spi_dev->bits_per_word; - - ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; - ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; - - /* - * setup dma pointers - */ - if (ifx_dev->use_dma) { - ifx_dev->spi_msg.is_dma_mapped = 1; - ifx_dev->tx_dma = ifx_dev->tx_bus; - ifx_dev->rx_dma = ifx_dev->rx_bus; - ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; - ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; - } else { - ifx_dev->spi_msg.is_dma_mapped = 0; - ifx_dev->tx_dma = (dma_addr_t)0; - ifx_dev->rx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; - } - - spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); - - /* Assert MRDY. This may have already been done by the write - * routine. - */ - mrdy_assert(ifx_dev); - - retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); - if (retval) { - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, - &ifx_dev->flags); - tasklet_schedule(&ifx_dev->io_work_tasklet); - return; - } - } else - ifx_dev->write_pending = 1; -} - -/** - * ifx_spi_free_port - free up the tty side - * @ifx_dev: IFX device going away - * - * Unregister and free up a port when the device goes away - */ -static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) -{ - if (ifx_dev->tty_dev) - tty_unregister_device(tty_drv, ifx_dev->minor); - tty_port_destroy(&ifx_dev->tty_port); - kfifo_free(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_create_port - create a new port - * @ifx_dev: our spi device - * - * Allocate and initialise the tty port that goes with this interface - * and add it to the tty layer so that it can be opened. - */ -static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) -{ - int ret = 0; - struct tty_port *pport = &ifx_dev->tty_port; - - spin_lock_init(&ifx_dev->fifo_lock); - lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, - &ifx_spi_key, 0); - - if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { - ret = -ENOMEM; - goto error_ret; - } - - tty_port_init(pport); - pport->ops = &ifx_tty_port_ops; - ifx_dev->minor = IFX_SPI_TTY_ID; - ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv, - ifx_dev->minor, &ifx_dev->spi_dev->dev); - if (IS_ERR(ifx_dev->tty_dev)) { - dev_dbg(&ifx_dev->spi_dev->dev, - "%s: registering tty device failed", __func__); - ret = PTR_ERR(ifx_dev->tty_dev); - goto error_port; - } - return 0; - -error_port: - tty_port_destroy(pport); -error_ret: - ifx_spi_free_port(ifx_dev); - return ret; -} - -/** - * ifx_spi_handle_srdy - handle SRDY - * @ifx_dev: device asserting SRDY - * - * Check our device state and see what we need to kick off when SRDY - * is asserted. This usually means killing the timer and firing off the - * I/O processing. - */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) -{ - if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - del_timer(&ifx_dev->spi_timer); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - } - - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); - - if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else - set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); -} - -/** - * ifx_spi_srdy_interrupt - SRDY asserted - * @irq: our IRQ number - * @dev: our ifx device - * - * The modem asserted SRDY. Handle the srdy event - */ -static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - ifx_dev->gpio.unack_srdy_int_nb++; - ifx_spi_handle_srdy(ifx_dev); - return IRQ_HANDLED; -} - -/** - * ifx_spi_reset_interrupt - Modem has changed reset state - * @irq: interrupt number - * @dev: our device pointer - * - * The modem has either entered or left reset state. Check the GPIO - * line to see which. - * - * FIXME: review locking on MR_INPROGRESS versus - * parallel unsolicited reset/solicited reset - */ -static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - int val = gpiod_get_value(ifx_dev->gpio.reset_out); - int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); - - if (val == 0) { - /* entered reset */ - set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (!solreset) { - /* unsolicited reset */ - tty_port_tty_hangup(&ifx_dev->tty_port, false); - } - } else { - /* exited reset */ - clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (solreset) { - set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); - wake_up(&ifx_dev->mdm_reset_wait); - } - } - return IRQ_HANDLED; -} - -/** - * ifx_spi_free_device - free device - * @ifx_dev: device to free - * - * Free the IFX device - */ -static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) -{ - ifx_spi_free_port(ifx_dev); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->tx_buffer, - ifx_dev->tx_bus); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->rx_buffer, - ifx_dev->rx_bus); -} - -/** - * ifx_spi_reset - reset modem - * @ifx_dev: modem to reset - * - * Perform a reset on the modem - */ -static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) -{ - int ret; - /* - * set up modem power, reset - * - * delays are required on some platforms for the modem - * to reset properly - */ - set_bit(MR_START, &ifx_dev->mdm_reset_state); - gpiod_set_value(ifx_dev->gpio.po, 0); - gpiod_set_value(ifx_dev->gpio.reset, 0); - msleep(25); - gpiod_set_value(ifx_dev->gpio.reset, 1); - msleep(1); - gpiod_set_value(ifx_dev->gpio.po, 1); - msleep(1); - gpiod_set_value(ifx_dev->gpio.po, 0); - ret = wait_event_timeout(ifx_dev->mdm_reset_wait, - test_bit(MR_COMPLETE, - &ifx_dev->mdm_reset_state), - IFX_RESET_TIMEOUT); - if (!ret) - dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", - ifx_dev->mdm_reset_state); - - ifx_dev->mdm_reset_state = 0; - return ret; -} - -/** - * ifx_spi_spi_probe - probe callback - * @spi: our possible matching SPI device - * - * Probe for a 6x60 modem on SPI bus. Perform any needed device and - * GPIO setup. - * - * FIXME: - * - Support for multiple devices - * - Split out MID specific GPIO handling eventually - */ - -static int ifx_spi_spi_probe(struct spi_device *spi) -{ - int ret; - int srdy; - struct ifx_modem_platform_data *pl_data; - struct ifx_spi_device *ifx_dev; - struct device *dev = &spi->dev; - - if (saved_ifx_dev) { - dev_dbg(dev, "ignoring subsequent detection"); - return -ENODEV; - } - - pl_data = dev_get_platdata(dev); - if (!pl_data) { - dev_err(dev, "missing platform data!"); - return -ENODEV; - } - - /* initialize structure to hold our device variables */ - ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); - if (!ifx_dev) { - dev_err(dev, "spi device allocation failed"); - return -ENOMEM; - } - saved_ifx_dev = ifx_dev; - ifx_dev->spi_dev = spi; - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); - spin_lock_init(&ifx_dev->write_lock); - spin_lock_init(&ifx_dev->power_lock); - ifx_dev->power_status = 0; - timer_setup(&ifx_dev->spi_timer, ifx_spi_timeout, 0); - ifx_dev->modem = pl_data->modem_type; - ifx_dev->use_dma = pl_data->use_dma; - ifx_dev->max_hz = pl_data->max_hz; - /* initialize spi mode, etc */ - spi->max_speed_hz = ifx_dev->max_hz; - spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); - spi->bits_per_word = spi_bpw; - ret = spi_setup(spi); - if (ret) { - dev_err(dev, "SPI setup wasn't successful %d", ret); - kfree(ifx_dev); - return -ENODEV; - } - - /* init swap_buf function according to word width configuration */ - if (spi->bits_per_word == 32) - ifx_dev->swap_buf = swap_buf_32; - else if (spi->bits_per_word == 16) - ifx_dev->swap_buf = swap_buf_16; - else - ifx_dev->swap_buf = swap_buf_8; - - /* ensure SPI protocol flags are initialized to enable transfer */ - ifx_dev->spi_more = 0; - ifx_dev->spi_slave_cts = 0; - - /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->tx_bus, - GFP_KERNEL); - if (!ifx_dev->tx_buffer) { - dev_err(dev, "DMA-TX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->rx_bus, - GFP_KERNEL); - if (!ifx_dev->rx_buffer) { - dev_err(dev, "DMA-RX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - - /* initialize waitq for modem reset */ - init_waitqueue_head(&ifx_dev->mdm_reset_wait); - - spi_set_drvdata(spi, ifx_dev); - tasklet_setup(&ifx_dev->io_work_tasklet, ifx_spi_io); - - set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); - - /* create our tty port */ - ret = ifx_spi_create_port(ifx_dev); - if (ret != 0) { - dev_err(dev, "create default tty port failed"); - goto error_ret; - } - - ifx_dev->gpio.reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(ifx_dev->gpio.reset)) { - dev_err(dev, "could not obtain reset GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.reset); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.reset, "ifxModem reset"); - ifx_dev->gpio.po = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW); - if (IS_ERR(ifx_dev->gpio.po)) { - dev_err(dev, "could not obtain power GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.po); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.po, "ifxModem power"); - ifx_dev->gpio.mrdy = devm_gpiod_get(dev, "mrdy", GPIOD_OUT_LOW); - if (IS_ERR(ifx_dev->gpio.mrdy)) { - dev_err(dev, "could not obtain mrdy GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.mrdy); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.mrdy, "ifxModem mrdy"); - ifx_dev->gpio.srdy = devm_gpiod_get(dev, "srdy", GPIOD_IN); - if (IS_ERR(ifx_dev->gpio.srdy)) { - dev_err(dev, "could not obtain srdy GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.srdy); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.srdy, "ifxModem srdy"); - ifx_dev->gpio.reset_out = devm_gpiod_get(dev, "rst_out", GPIOD_IN); - if (IS_ERR(ifx_dev->gpio.reset_out)) { - dev_err(dev, "could not obtain rst_out GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.reset_out); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.reset_out, "ifxModem reset out"); - ifx_dev->gpio.pmu_reset = devm_gpiod_get(dev, "pmu_reset", GPIOD_ASIS); - if (IS_ERR(ifx_dev->gpio.pmu_reset)) { - dev_err(dev, "could not obtain pmu_reset GPIO\n"); - ret = PTR_ERR(ifx_dev->gpio.pmu_reset); - goto error_ret; - } - gpiod_set_consumer_name(ifx_dev->gpio.pmu_reset, "ifxModem PMU reset"); - - ret = request_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), - ifx_spi_reset_interrupt, - IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, - ifx_dev); - if (ret) { - dev_err(dev, "Unable to get irq %x\n", - gpiod_to_irq(ifx_dev->gpio.reset_out)); - goto error_ret; - } - - ret = ifx_spi_reset(ifx_dev); - - ret = request_irq(gpiod_to_irq(ifx_dev->gpio.srdy), - ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME, - ifx_dev); - if (ret) { - dev_err(dev, "Unable to get irq %x", - gpiod_to_irq(ifx_dev->gpio.srdy)); - goto error_ret2; - } - - /* set pm runtime power state and register with power system */ - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - /* handle case that modem is already signaling SRDY */ - /* no outgoing tty open at this point, this just satisfies the - * modem's read and should reset communication properly - */ - srdy = gpiod_get_value(ifx_dev->gpio.srdy); - - if (srdy) { - mrdy_assert(ifx_dev); - ifx_spi_handle_srdy(ifx_dev); - } else - mrdy_set_low(ifx_dev); - return 0; - -error_ret2: - free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); -error_ret: - ifx_spi_free_device(ifx_dev); - saved_ifx_dev = NULL; - return ret; -} - -/** - * ifx_spi_spi_remove - SPI device was removed - * @spi: SPI device - * - * FIXME: We should be shutting the device down here not in - * the module unload path. - */ - -static int ifx_spi_spi_remove(struct spi_device *spi) -{ - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - /* stop activity */ - tasklet_kill(&ifx_dev->io_work_tasklet); - - pm_runtime_disable(&spi->dev); - - /* free irq */ - free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); - free_irq(gpiod_to_irq(ifx_dev->gpio.srdy), ifx_dev); - - /* free allocations */ - ifx_spi_free_device(ifx_dev); - - saved_ifx_dev = NULL; - return 0; -} - -/** - * ifx_spi_spi_shutdown - called on SPI shutdown - * @spi: SPI device - * - * No action needs to be taken here - */ - -static void ifx_spi_spi_shutdown(struct spi_device *spi) -{ - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - - ifx_modem_power_off(ifx_dev); -} - -/* - * various suspends and resumes have nothing to do - * no hardware to save state for - */ - -/** - * ifx_spi_pm_suspend - suspend modem on system suspend - * @dev: device being suspended - * - * Suspend the modem. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_pm_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_resume - resume modem on system resume - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - * - * FIXME: do we need to reset anything here ? - */ -static int ifx_spi_pm_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_resume - suspend modem - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - */ -static int ifx_spi_pm_runtime_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_suspend - suspend modem - * @dev: device being suspended - * - * Allow the modem to suspend and thus suspend to continue up the - * device tree. - */ -static int ifx_spi_pm_runtime_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_idle - check if modem idle - * @dev: our device - * - * Check conditions and queue runtime suspend if idle. - */ -static int ifx_spi_pm_runtime_idle(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - - if (!ifx_dev->power_status) - pm_runtime_suspend(dev); - - return 0; -} - -static const struct dev_pm_ops ifx_spi_pm = { - .resume = ifx_spi_pm_resume, - .suspend = ifx_spi_pm_suspend, - .runtime_resume = ifx_spi_pm_runtime_resume, - .runtime_suspend = ifx_spi_pm_runtime_suspend, - .runtime_idle = ifx_spi_pm_runtime_idle -}; - -static const struct spi_device_id ifx_id_table[] = { - {"ifx6160", 0}, - {"ifx6260", 0}, - { } -}; -MODULE_DEVICE_TABLE(spi, ifx_id_table); - -/* spi operations */ -static struct spi_driver ifx_spi_driver = { - .driver = { - .name = DRVNAME, - .pm = &ifx_spi_pm, - }, - .probe = ifx_spi_spi_probe, - .shutdown = ifx_spi_spi_shutdown, - .remove = ifx_spi_spi_remove, - .id_table = ifx_id_table -}; - -/** - * ifx_spi_exit - module exit - * - * Unload the module. - */ - -static void __exit ifx_spi_exit(void) -{ - /* unregister */ - spi_unregister_driver(&ifx_spi_driver); - tty_unregister_driver(tty_drv); - put_tty_driver(tty_drv); - unregister_reboot_notifier(&ifx_modem_reboot_notifier_block); -} - -/** - * ifx_spi_init - module entry point - * - * Initialise the SPI and tty interfaces for the IFX SPI driver - * We need to initialize upper-edge spi driver after the tty - * driver because otherwise the spi probe will race - */ - -static int __init ifx_spi_init(void) -{ - int result; - - tty_drv = alloc_tty_driver(1); - if (!tty_drv) { - pr_err("%s: alloc_tty_driver failed", DRVNAME); - return -ENOMEM; - } - - tty_drv->driver_name = DRVNAME; - tty_drv->name = TTYNAME; - tty_drv->minor_start = IFX_SPI_TTY_ID; - tty_drv->type = TTY_DRIVER_TYPE_SERIAL; - tty_drv->subtype = SERIAL_TYPE_NORMAL; - tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_drv->init_termios = tty_std_termios; - - tty_set_operations(tty_drv, &ifx_spi_serial_ops); - - result = tty_register_driver(tty_drv); - if (result) { - pr_err("%s: tty_register_driver failed(%d)", - DRVNAME, result); - goto err_free_tty; - } - - result = spi_register_driver(&ifx_spi_driver); - if (result) { - pr_err("%s: spi_register_driver failed(%d)", - DRVNAME, result); - goto err_unreg_tty; - } - - result = register_reboot_notifier(&ifx_modem_reboot_notifier_block); - if (result) { - pr_err("%s: register ifx modem reboot notifier failed(%d)", - DRVNAME, result); - goto err_unreg_spi; - } - - return 0; -err_unreg_spi: - spi_unregister_driver(&ifx_spi_driver); -err_unreg_tty: - tty_unregister_driver(tty_drv); -err_free_tty: - put_tty_driver(tty_drv); - - return result; -} - -module_init(ifx_spi_init); -module_exit(ifx_spi_exit); - -MODULE_AUTHOR("Intel"); -MODULE_DESCRIPTION("IFX6x60 spi driver"); -MODULE_LICENSE("GPL"); -MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h deleted file mode 100644 index ecb841d928a7..000000000000 --- a/drivers/tty/serial/ifx6x60.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/**************************************************************************** - * - * Driver for the IFX spi modem. - * - * Copyright (C) 2009, 2010 Intel Corp - * Jim Stanley - * - *****************************************************************************/ -#ifndef _IFX6X60_H -#define _IFX6X60_H - -struct gpio_desc; - -#define DRVNAME "ifx6x60" -#define TTYNAME "ttyIFX" - -#define IFX_SPI_MAX_MINORS 1 -#define IFX_SPI_TRANSFER_SIZE 2048 -#define IFX_SPI_FIFO_SIZE 4096 - -#define IFX_SPI_HEADER_OVERHEAD 4 -#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) - -/* device flags bitfield definitions */ -#define IFX_SPI_STATE_PRESENT 0 -#define IFX_SPI_STATE_IO_IN_PROGRESS 1 -#define IFX_SPI_STATE_IO_READY 2 -#define IFX_SPI_STATE_TIMER_PENDING 3 -#define IFX_SPI_STATE_IO_AVAILABLE 4 - -/* flow control bitfields */ -#define IFX_SPI_DCD 0 -#define IFX_SPI_CTS 1 -#define IFX_SPI_DSR 2 -#define IFX_SPI_RI 3 -#define IFX_SPI_DTR 4 -#define IFX_SPI_RTS 5 -#define IFX_SPI_TX_FC 6 -#define IFX_SPI_RX_FC 7 -#define IFX_SPI_UPDATE 8 - -#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ - IFX_SPI_HEADER_OVERHEAD) - -#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING -#define IFX_SPI_GPIO_TARGET 0 -#define IFX_SPI_GPIO0 0x105 - -#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) - -/* values for bits in power status byte */ -#define IFX_SPI_POWER_DATA_PENDING 1 -#define IFX_SPI_POWER_SRDY 2 - -struct ifx_spi_device { - /* Our SPI device */ - struct spi_device *spi_dev; - - /* Port specific data */ - struct kfifo tx_fifo; - spinlock_t fifo_lock; - unsigned long signal_state; - - /* TTY Layer logic */ - struct tty_port tty_port; - struct device *tty_dev; - int minor; - - /* Low level I/O work */ - struct tasklet_struct io_work_tasklet; - unsigned long flags; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - - int modem; /* Modem type */ - int use_dma; /* provide dma-able addrs in SPI msg */ - long max_hz; /* max SPI frequency */ - - spinlock_t write_lock; - int write_pending; - spinlock_t power_lock; - unsigned char power_status; - - unsigned char *rx_buffer; - unsigned char *tx_buffer; - dma_addr_t rx_bus; - dma_addr_t tx_bus; - unsigned char spi_more; - unsigned char spi_slave_cts; - - struct timer_list spi_timer; - - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - struct { - /* gpio lines */ - struct gpio_desc *srdy; /* slave-ready gpio */ - struct gpio_desc *mrdy; /* master-ready gpio */ - struct gpio_desc *reset; /* modem-reset gpio */ - struct gpio_desc *po; /* modem-on gpio */ - struct gpio_desc *reset_out; /* modem-in-reset gpio */ - struct gpio_desc *pmu_reset; /* PMU reset gpio */ - /* state/stats */ - int unack_srdy_int_nb; - } gpio; - - /* modem reset */ - unsigned long mdm_reset_state; -#define MR_START 0 -#define MR_INPROGRESS 1 -#define MR_COMPLETE 2 - wait_queue_head_t mdm_reset_wait; - void (*swap_buf)(unsigned char *buf, int len, void *end); -}; - -#endif /* _IFX6X60_H */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 425624d794dd..8257597d034d 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2248,7 +2248,7 @@ static int imx_uart_probe(struct platform_device *pdev) sport->port.dev = &pdev->dev; sport->port.mapbase = res->start; sport->port.membase = base; - sport->port.type = PORT_IMX, + sport->port.type = PORT_IMX; sport->port.iotype = UPIO_MEM; sport->port.irq = rxirq; sport->port.fifosize = 32; diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 62813e421f12..497b334bc845 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -876,7 +876,7 @@ static int lqasc_probe(struct platform_device *pdev) port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &lqasc_pops; port->fifosize = 16; - port->type = PORT_LTQ_ASC, + port->type = PORT_LTQ_ASC; port->line = line; port->dev = &pdev->dev; /* unused, just to be backward-compatible */ diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 371569a0fd00..3c92d4e01488 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -521,9 +521,6 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, MAX3100_STATUS_PE | MAX3100_STATUS_FE | MAX3100_STATUS_OE; - /* we are sending char from a workqueue so enable */ - s->port.state->port.low_latency = 1; - if (s->poll_time > 0) del_timer_sync(&s->timer); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 8ecf622602cb..f414d6acad69 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -34,8 +34,6 @@ #include #include -#include - #include #include #include @@ -1535,34 +1533,6 @@ disable_clk_ahb: return err; } -/* - * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it - * could successfully get all information from dt or a negative errno. - */ -static int serial_mxs_probe_dt(struct mxs_auart_port *s, - struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - if (!np) - /* no device tree device */ - return 1; - - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); - return ret; - } - s->port.line = ret; - - if (of_get_property(np, "uart-has-rtscts", NULL) || - of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) - set_bit(MXS_AUART_RTSCTS, &s->flags); - - return 0; -} - static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev) { enum mctrl_gpio_idx i; @@ -1631,6 +1601,7 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) static int mxs_auart_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct mxs_auart_port *s; u32 version; int ret, irq; @@ -1643,11 +1614,17 @@ static int mxs_auart_probe(struct platform_device *pdev) s->port.dev = &pdev->dev; s->dev = &pdev->dev; - ret = serial_mxs_probe_dt(s, pdev); - if (ret > 0) - s->port.line = pdev->id < 0 ? 0 : pdev->id; - else if (ret < 0) + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); return ret; + } + s->port.line = ret; + + if (of_get_property(np, "uart-has-rtscts", NULL) || + of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) + set_bit(MXS_AUART_RTSCTS, &s->flags); + if (s->port.line >= ARRAY_SIZE(auart_port)) { dev_err(&pdev->dev, "serial%d out of range\n", s->port.line); return -EINVAL; diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index c149f8c30007..abc6042f0378 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -62,6 +63,9 @@ #define OWL_UART_STAT_TRFL_MASK GENMASK(16, 11) #define OWL_UART_STAT_UTBB BIT(17) +#define OWL_UART_POLL_USEC 5 +#define OWL_UART_TIMEOUT_USEC 10000 + static struct uart_driver owl_uart_driver; struct owl_uart_info { @@ -461,6 +465,36 @@ static void owl_uart_config_port(struct uart_port *port, int flags) } } +#ifdef CONFIG_CONSOLE_POLL + +static int owl_uart_poll_get_char(struct uart_port *port) +{ + if (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_RFEM) + return NO_POLL_CHAR; + + return owl_uart_read(port, OWL_UART_RXDAT); +} + +static void owl_uart_poll_put_char(struct uart_port *port, unsigned char ch) +{ + u32 reg; + int ret; + + /* Wait while FIFO is full or timeout */ + ret = readl_poll_timeout_atomic(port->membase + OWL_UART_STAT, reg, + !(reg & OWL_UART_STAT_TFFU), + OWL_UART_POLL_USEC, + OWL_UART_TIMEOUT_USEC); + if (ret == -ETIMEDOUT) { + dev_err(port->dev, "Timeout waiting while UART TX FULL\n"); + return; + } + + owl_uart_write(port, ch, OWL_UART_TXDAT); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static const struct uart_ops owl_uart_ops = { .set_mctrl = owl_uart_set_mctrl, .get_mctrl = owl_uart_get_mctrl, @@ -476,6 +510,10 @@ static const struct uart_ops owl_uart_ops = { .request_port = owl_uart_request_port, .release_port = owl_uart_release_port, .verify_port = owl_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = owl_uart_poll_get_char, + .poll_put_char = owl_uart_poll_put_char, +#endif }; #ifdef CONFIG_SERIAL_OWL_CONSOLE diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 828f9ad1be49..ba31e97d3d96 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -975,7 +975,6 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, port->closing_wait = closing_wait; if (new_info->xmit_fifo_size) uport->fifosize = new_info->xmit_fifo_size; - port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; check_and_exit: retval = 0; @@ -1795,8 +1794,6 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) if (!uport || uport->flags & UPF_DEAD) return -ENXIO; - port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; - /* * Start up the serial port. */ @@ -2851,6 +2848,8 @@ static const struct attribute_group tty_dev_attr_group = { * @drv: pointer to the uart low level driver structure for this port * @uport: uart port structure to use for this port. * + * Context: task context, might sleep + * * This allows the driver to register its own uart_port structure * with the core driver. The main purpose is to allow the low * level uart drivers to expand uart_port, rather than having yet @@ -2864,8 +2863,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) struct device *tty_dev; int num_groups; - BUG_ON(in_interrupt()); - if (uport->line >= drv->nr) return -EINVAL; @@ -2954,6 +2951,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) * @drv: pointer to the uart low level driver structure for this port * @uport: uart port structure for this port * + * Context: task context, might sleep + * * This unhooks (and hangs up) the specified port structure from the * core driver. No further calls will be made to the low-level code * for this port. @@ -2966,8 +2965,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) struct tty_struct *tty; int ret = 0; - BUG_ON(in_interrupt()); - mutex_lock(&port_mutex); /* diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c deleted file mode 100644 index 38622f2a30a9..000000000000 --- a/drivers/tty/serial/sirfsoc_uart.c +++ /dev/null @@ -1,1503 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Driver for CSR SiRFprimaII onboard UARTs. - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "sirfsoc_uart.h" - -static unsigned int -sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count); -static unsigned int -sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count); -static struct uart_driver sirfsoc_uart_drv; - -static void sirfsoc_uart_tx_dma_complete_callback(void *param); -static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { - {4000000, 2359296}, - {3500000, 1310721}, - {3000000, 1572865}, - {2500000, 1245186}, - {2000000, 1572866}, - {1500000, 1245188}, - {1152000, 1638404}, - {1000000, 1572869}, - {921600, 1114120}, - {576000, 1245196}, - {500000, 1245198}, - {460800, 1572876}, - {230400, 1310750}, - {115200, 1310781}, - {57600, 1310843}, - {38400, 1114328}, - {19200, 1114545}, - {9600, 1114979}, -}; - -static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR]; - -static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) -{ - return container_of(port, struct sirfsoc_uart_port, port); -} - -static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port) -{ - unsigned long reg; - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status); - return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0; -} - -static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) - goto cts_asserted; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) & - SIRFUART_AFC_CTS_STATUS)) - goto cts_asserted; - else - goto cts_deasserted; - } else { - if (!gpio_get_value(sirfport->cts_gpio)) - goto cts_asserted; - else - goto cts_deasserted; - } -cts_deasserted: - return TIOCM_CAR | TIOCM_DSR; -cts_asserted: - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - unsigned int assert = mctrl & TIOCM_RTS; - unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; - unsigned int current_val; - - if (mctrl & TIOCM_LOOP) { - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) - wr_regl(port, ureg->sirfsoc_line_ctrl, - rd_regl(port, ureg->sirfsoc_line_ctrl) | - SIRFUART_LOOP_BACK); - else - wr_regl(port, ureg->sirfsoc_mode1, - rd_regl(port, ureg->sirfsoc_mode1) | - SIRFSOC_USP_LOOP_BACK_CTRL); - } else { - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) - wr_regl(port, ureg->sirfsoc_line_ctrl, - rd_regl(port, ureg->sirfsoc_line_ctrl) & - ~SIRFUART_LOOP_BACK); - else - wr_regl(port, ureg->sirfsoc_mode1, - rd_regl(port, ureg->sirfsoc_mode1) & - ~SIRFSOC_USP_LOOP_BACK_CTRL); - } - - if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) - return; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF; - val |= current_val; - wr_regl(port, ureg->sirfsoc_afc_ctrl, val); - } else { - if (!val) - gpio_set_value(sirfport->rts_gpio, 1); - else - gpio_set_value(sirfport->rts_gpio, 0); - } -} - -static void sirfsoc_uart_stop_tx(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - - if (sirfport->tx_dma_chan) { - if (sirfport->tx_dma_state == TX_DMA_RUNNING) { - dmaengine_pause(sirfport->tx_dma_chan); - sirfport->tx_dma_state = TX_DMA_PAUSE; - } else { - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~uint_en->sirfsoc_txfifo_empty_en); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_txfifo_empty_en); - } - } else { - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, - ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~uint_en->sirfsoc_txfifo_empty_en); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_txfifo_empty_en); - } -} - -static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) -{ - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - struct circ_buf *xmit = &port->state->xmit; - unsigned long tran_size; - unsigned long tran_start; - unsigned long pio_tx_size; - - tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - tran_start = (unsigned long)(xmit->buf + xmit->tail); - if (uart_circ_empty(xmit) || uart_tx_stopped(port) || - !tran_size) - return; - if (sirfport->tx_dma_state == TX_DMA_PAUSE) { - dmaengine_resume(sirfport->tx_dma_chan); - return; - } - if (sirfport->tx_dma_state == TX_DMA_RUNNING) - return; - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg)& - ~(uint_en->sirfsoc_txfifo_empty_en)); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_txfifo_empty_en); - /* - * DMA requires buffer address and buffer length are both aligned with - * 4 bytes, so we use PIO for - * 1. if address is not aligned with 4bytes, use PIO for the first 1~3 - * bytes, and move to DMA for the left part aligned with 4bytes - * 2. if buffer length is not aligned with 4bytes, use DMA for aligned - * part first, move to PIO for the left 1~3 bytes - */ - if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) { - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)| - SIRFUART_IO_MODE); - if (BYTES_TO_ALIGN(tran_start)) { - pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport, - BYTES_TO_ALIGN(tran_start)); - tran_size -= pio_tx_size; - } - if (tran_size < 4) - sirfsoc_uart_pio_tx_chars(sirfport, tran_size); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg)| - uint_en->sirfsoc_txfifo_empty_en); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_txfifo_empty_en); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); - } else { - /* tx transfer mode switch into dma mode */ - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)& - ~SIRFUART_IO_MODE); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); - tran_size &= ~(0x3); - - sirfport->tx_dma_addr = dma_map_single(port->dev, - xmit->buf + xmit->tail, - tran_size, DMA_TO_DEVICE); - sirfport->tx_dma_desc = dmaengine_prep_slave_single( - sirfport->tx_dma_chan, sirfport->tx_dma_addr, - tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); - if (!sirfport->tx_dma_desc) { - dev_err(port->dev, "DMA prep slave single fail\n"); - return; - } - sirfport->tx_dma_desc->callback = - sirfsoc_uart_tx_dma_complete_callback; - sirfport->tx_dma_desc->callback_param = (void *)sirfport; - sirfport->transfer_size = tran_size; - - dmaengine_submit(sirfport->tx_dma_desc); - dma_async_issue_pending(sirfport->tx_dma_chan); - sirfport->tx_dma_state = TX_DMA_RUNNING; - } -} - -static void sirfsoc_uart_start_tx(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - if (sirfport->tx_dma_chan) - sirfsoc_uart_tx_with_dma(sirfport); - else { - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, - ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); - sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg)| - uint_en->sirfsoc_txfifo_empty_en); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_txfifo_empty_en); - } -} - -static void sirfsoc_uart_stop_rx(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - if (sirfport->rx_dma_chan) { - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~(SIRFUART_RX_DMA_INT_EN(uint_en, - sirfport->uart_reg->uart_type) | - uint_en->sirfsoc_rx_done_en)); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - SIRFUART_RX_DMA_INT_EN(uint_en, - sirfport->uart_reg->uart_type)| - uint_en->sirfsoc_rx_done_en); - dmaengine_terminate_all(sirfport->rx_dma_chan); - } else { - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg)& - ~(SIRFUART_RX_IO_INT_EN(uint_en, - sirfport->uart_reg->uart_type))); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - SIRFUART_RX_IO_INT_EN(uint_en, - sirfport->uart_reg->uart_type)); - } -} - -static void sirfsoc_uart_disable_ms(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - - if (!sirfport->hw_flow_ctrl) - return; - sirfport->ms_enabled = false; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - wr_regl(port, ureg->sirfsoc_afc_ctrl, - rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg)& - ~uint_en->sirfsoc_cts_en); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_cts_en); - } else - disable_irq(gpio_to_irq(sirfport->cts_gpio)); -} - -static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id) -{ - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; - struct uart_port *port = &sirfport->port; - spin_lock(&port->lock); - if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled) - uart_handle_cts_change(port, - !gpio_get_value(sirfport->cts_gpio)); - spin_unlock(&port->lock); - return IRQ_HANDLED; -} - -static void sirfsoc_uart_enable_ms(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - - if (!sirfport->hw_flow_ctrl) - return; - sirfport->ms_enabled = true; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - wr_regl(port, ureg->sirfsoc_afc_ctrl, - rd_regl(port, ureg->sirfsoc_afc_ctrl) | - SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN | - SIRFUART_AFC_CTRL_RX_THD); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) - | uint_en->sirfsoc_cts_en); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_cts_en); - } else - enable_irq(gpio_to_irq(sirfport->cts_gpio)); -} - -static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl); - if (break_state) - ulcon |= SIRFUART_SET_BREAK; - else - ulcon &= ~SIRFUART_SET_BREAK; - wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon); - } -} - -static unsigned int -sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - unsigned int ch, rx_count = 0; - struct tty_struct *tty; - tty = tty_port_tty_get(&port->state->port); - if (!tty) - return -ENODEV; - while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & - ufifo_st->ff_empty(port))) { - ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) | - SIRFUART_DUMMY_READ; - if (unlikely(uart_handle_sysrq_char(port, ch))) - continue; - uart_insert_char(port, 0, 0, ch, TTY_NORMAL); - rx_count++; - if (rx_count >= max_rx_count) - break; - } - - port->icount.rx += rx_count; - - return rx_count; -} - -static unsigned int -sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) -{ - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - struct circ_buf *xmit = &port->state->xmit; - unsigned int num_tx = 0; - while (!uart_circ_empty(xmit) && - !(rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_full(port)) && - count--) { - wr_regl(port, ureg->sirfsoc_tx_fifo_data, - xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - num_tx++; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - return num_tx; -} - -static void sirfsoc_uart_tx_dma_complete_callback(void *param) -{ - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; - struct uart_port *port = &sirfport->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - xmit->tail = (xmit->tail + sirfport->transfer_size) & - (UART_XMIT_SIZE - 1); - port->icount.tx += sirfport->transfer_size; - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - if (sirfport->tx_dma_addr) - dma_unmap_single(port->dev, sirfport->tx_dma_addr, - sirfport->transfer_size, DMA_TO_DEVICE); - sirfport->tx_dma_state = TX_DMA_IDLE; - sirfsoc_uart_tx_with_dma(sirfport); - spin_unlock_irqrestore(&port->lock, flags); -} - -static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) -{ - unsigned long intr_status; - unsigned long cts_status; - unsigned long flag = TTY_NORMAL; - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - struct uart_state *state = port->state; - struct circ_buf *xmit = &port->state->xmit; - spin_lock(&port->lock); - intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg); - wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status); - intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg); - if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st, - sirfport->uart_reg->uart_type)))) { - if (intr_status & uint_st->sirfsoc_rxd_brk) { - port->icount.brk++; - if (uart_handle_break(port)) - goto recv_char; - } - if (intr_status & uint_st->sirfsoc_rx_oflow) { - port->icount.overrun++; - flag = TTY_OVERRUN; - } - if (intr_status & uint_st->sirfsoc_frm_err) { - port->icount.frame++; - flag = TTY_FRAME; - } - if (intr_status & uint_st->sirfsoc_parity_err) { - port->icount.parity++; - flag = TTY_PARITY; - } - wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); - intr_status &= port->read_status_mask; - uart_insert_char(port, intr_status, - uint_en->sirfsoc_rx_oflow_en, 0, flag); - } -recv_char: - if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) && - (intr_status & SIRFUART_CTS_INT_ST(uint_st)) && - !sirfport->tx_dma_state) { - cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) & - SIRFUART_AFC_CTS_STATUS; - if (cts_status != 0) - cts_status = 0; - else - cts_status = 1; - uart_handle_cts_change(port, cts_status); - wake_up_interruptible(&state->port.delta_msr_wait); - } - if (!sirfport->rx_dma_chan && - (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) { - /* - * chip will trigger continuous RX_TIMEOUT interrupt - * in RXFIFO empty and not trigger if RXFIFO recevice - * data in limit time, original method use RX_TIMEOUT - * will trigger lots of useless interrupt in RXFIFO - * empty.RXFIFO received one byte will trigger RX_DONE - * interrupt.use RX_DONE to wait for data received - * into RXFIFO, use RX_THD/RX_FULL for lots data receive - * and use RX_TIMEOUT for the last left data. - */ - if (intr_status & uint_st->sirfsoc_rx_done) { - if (!sirfport->is_atlas7) { - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) - & ~(uint_en->sirfsoc_rx_done_en)); - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) - | (uint_en->sirfsoc_rx_timeout_en)); - } else { - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_rx_done_en); - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_rx_timeout_en); - } - } else { - if (intr_status & uint_st->sirfsoc_rx_timeout) { - if (!sirfport->is_atlas7) { - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) - & ~(uint_en->sirfsoc_rx_timeout_en)); - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) - | (uint_en->sirfsoc_rx_done_en)); - } else { - wr_regl(port, - ureg->sirfsoc_int_en_clr_reg, - uint_en->sirfsoc_rx_timeout_en); - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_rx_done_en); - } - } - sirfsoc_uart_pio_rx_chars(port, port->fifosize); - } - } - spin_unlock(&port->lock); - tty_flip_buffer_push(&state->port); - spin_lock(&port->lock); - if (intr_status & uint_st->sirfsoc_txfifo_empty) { - if (sirfport->tx_dma_chan) - sirfsoc_uart_tx_with_dma(sirfport); - else { - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - spin_unlock(&port->lock); - return IRQ_HANDLED; - } else { - sirfsoc_uart_pio_tx_chars(sirfport, - port->fifosize); - if ((uart_circ_empty(xmit)) && - (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_empty(port))) - sirfsoc_uart_stop_tx(port); - } - } - } - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static void sirfsoc_uart_rx_dma_complete_callback(void *param) -{ -} - -/* submit rx dma task into dmaengine */ -static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & - ~SIRFUART_IO_MODE); - sirfport->rx_dma_items.xmit.tail = - sirfport->rx_dma_items.xmit.head = 0; - sirfport->rx_dma_items.desc = - dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan, - sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE, - SIRFSOC_RX_DMA_BUF_SIZE / 2, - DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); - if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) { - dev_err(port->dev, "DMA slave single fail\n"); - return; - } - sirfport->rx_dma_items.desc->callback = - sirfsoc_uart_rx_dma_complete_callback; - sirfport->rx_dma_items.desc->callback_param = sirfport; - sirfport->rx_dma_items.cookie = - dmaengine_submit(sirfport->rx_dma_items.desc); - dma_async_issue_pending(sirfport->rx_dma_chan); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) | - SIRFUART_RX_DMA_INT_EN(uint_en, - sirfport->uart_reg->uart_type)); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - SIRFUART_RX_DMA_INT_EN(uint_en, - sirfport->uart_reg->uart_type)); -} - -static unsigned int -sirfsoc_usp_calc_sample_div(unsigned long set_rate, - unsigned long ioclk_rate, unsigned long *sample_reg) -{ - unsigned long min_delta = ~0UL; - unsigned short sample_div; - unsigned long ioclk_div = 0; - unsigned long temp_delta; - - for (sample_div = SIRF_USP_MIN_SAMPLE_DIV; - sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { - temp_delta = ioclk_rate - - (ioclk_rate + (set_rate * sample_div) / 2) - / (set_rate * sample_div) * set_rate * sample_div; - - temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; - if (temp_delta < min_delta) { - ioclk_div = (2 * ioclk_rate / - (set_rate * sample_div) + 1) / 2 - 1; - if (ioclk_div > SIRF_IOCLK_DIV_MAX) - continue; - min_delta = temp_delta; - *sample_reg = sample_div; - if (!temp_delta) - break; - } - } - return ioclk_div; -} - -static unsigned int -sirfsoc_uart_calc_sample_div(unsigned long baud_rate, - unsigned long ioclk_rate, unsigned long *set_baud) -{ - unsigned long min_delta = ~0UL; - unsigned short sample_div; - unsigned int regv = 0; - unsigned long ioclk_div; - unsigned long baud_tmp; - int temp_delta; - - for (sample_div = SIRF_MIN_SAMPLE_DIV; - sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { - ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1; - if (ioclk_div > SIRF_IOCLK_DIV_MAX) - continue; - baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1)); - temp_delta = baud_tmp - baud_rate; - temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; - if (temp_delta < min_delta) { - regv = regv & (~SIRF_IOCLK_DIV_MASK); - regv = regv | ioclk_div; - regv = regv & (~SIRF_SAMPLE_DIV_MASK); - regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT); - min_delta = temp_delta; - *set_baud = baud_tmp; - } - } - return regv; -} - -static void sirfsoc_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long config_reg = 0; - unsigned long baud_rate; - unsigned long set_baud; - unsigned long flags; - unsigned long ic; - unsigned int clk_div_reg = 0; - unsigned long txfifo_op_reg, ioclk_rate; - unsigned long rx_time_out; - int threshold_div; - u32 data_bit_len, stop_bit_len, len_val; - unsigned long sample_div_reg = 0xf; - ioclk_rate = port->uartclk; - - switch (termios->c_cflag & CSIZE) { - default: - case CS8: - data_bit_len = 8; - config_reg |= SIRFUART_DATA_BIT_LEN_8; - break; - case CS7: - data_bit_len = 7; - config_reg |= SIRFUART_DATA_BIT_LEN_7; - break; - case CS6: - data_bit_len = 6; - config_reg |= SIRFUART_DATA_BIT_LEN_6; - break; - case CS5: - data_bit_len = 5; - config_reg |= SIRFUART_DATA_BIT_LEN_5; - break; - } - if (termios->c_cflag & CSTOPB) { - config_reg |= SIRFUART_STOP_BIT_LEN_2; - stop_bit_len = 2; - } else - stop_bit_len = 1; - - spin_lock_irqsave(&port->lock, flags); - port->read_status_mask = uint_en->sirfsoc_rx_oflow_en; - port->ignore_status_mask = 0; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - if (termios->c_iflag & INPCK) - port->read_status_mask |= uint_en->sirfsoc_frm_err_en | - uint_en->sirfsoc_parity_err_en; - } else { - if (termios->c_iflag & INPCK) - port->read_status_mask |= uint_en->sirfsoc_frm_err_en; - } - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= - uint_en->sirfsoc_frm_err_en | - uint_en->sirfsoc_parity_err_en; - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - config_reg |= SIRFUART_STICK_BIT_MARK; - else - config_reg |= SIRFUART_STICK_BIT_SPACE; - } else { - if (termios->c_cflag & PARODD) - config_reg |= SIRFUART_STICK_BIT_ODD; - else - config_reg |= SIRFUART_STICK_BIT_EVEN; - } - } - } else { - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= - uint_en->sirfsoc_frm_err_en; - if (termios->c_cflag & PARENB) - dev_warn(port->dev, - "USP-UART not support parity err\n"); - } - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= - uint_en->sirfsoc_rxd_brk_en; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= - uint_en->sirfsoc_rx_oflow_en; - } - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= SIRFUART_DUMMY_READ; - /* Hardware Flow Control Settings */ - if (UART_ENABLE_MS(port, termios->c_cflag)) { - if (!sirfport->ms_enabled) - sirfsoc_uart_enable_ms(port); - } else { - if (sirfport->ms_enabled) - sirfsoc_uart_disable_ms(port); - } - baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); - if (ioclk_rate == 150000000) { - for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) - if (baud_rate == baudrate_to_regv[ic].baud_rate) - clk_div_reg = baudrate_to_regv[ic].reg_val; - } - set_baud = baud_rate; - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - if (unlikely(clk_div_reg == 0)) - clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate, - ioclk_rate, &set_baud); - wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg); - } else { - clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate, - ioclk_rate, &sample_div_reg); - sample_div_reg--; - set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) / - (sample_div_reg + 1)); - /* setting usp mode 2 */ - len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) | - (1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET)); - len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK) - << SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET); - wr_regl(port, ureg->sirfsoc_mode2, len_val); - } - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, set_baud, set_baud); - /* set receive timeout && data bits len */ - rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); - rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); - txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, - (txfifo_op_reg & ~SIRFUART_FIFO_START)); - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out); - wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); - } else { - /*tx frame ctrl*/ - len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << - SIRFSOC_USP_TX_FRAME_LEN_OFFSET; - len_val |= ((data_bit_len - 1) << - SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET); - len_val |= (((clk_div_reg & 0xc00) >> 10) << - SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET); - wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val); - /*rx frame ctrl*/ - len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << - SIRFSOC_USP_RX_FRAME_LEN_OFFSET; - len_val |= (data_bit_len - 1) << - SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET; - len_val |= (((clk_div_reg & 0xf000) >> 12) << - SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET); - wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); - /*async param*/ - wr_regl(port, ureg->sirfsoc_async_param_reg, - (SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) | - (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << - SIRFSOC_USP_ASYNC_DIV2_OFFSET); - } - if (sirfport->tx_dma_chan) - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); - else - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); - if (sirfport->rx_dma_chan) - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & - ~SIRFUART_IO_MODE); - else - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | - SIRFUART_IO_MODE); - sirfport->rx_period_time = 20000000; - /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ - if (set_baud < 1000000) - threshold_div = 1; - else - threshold_div = 2; - wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, - SIRFUART_FIFO_THD(port) / threshold_div); - wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, - SIRFUART_FIFO_THD(port) / threshold_div); - txfifo_op_reg |= SIRFUART_FIFO_START; - wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg); - uart_update_timeout(port, termios->c_cflag, set_baud); - wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - if (!state) - clk_prepare_enable(sirfport->clk); - else - clk_disable_unprepare(sirfport->clk); -} - -static int sirfsoc_uart_startup(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned int index = port->line; - int ret; - irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN); - ret = request_irq(port->irq, - sirfsoc_uart_isr, - 0, - SIRFUART_PORT_NAME, - sirfport); - if (ret != 0) { - dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n", - index, port->irq); - goto irq_err; - } - /* initial hardware settings */ - wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) | - SIRFUART_IO_MODE); - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | - SIRFUART_IO_MODE); - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & - ~SIRFUART_RX_DMA_FLUSH); - wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); - wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); - wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_mode1, - SIRFSOC_USP_ENDIAN_CTRL_LSBF | - SIRFSOC_USP_EN); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); - wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port)); - if (sirfport->rx_dma_chan) - wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk, - SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) | - SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) | - SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4)); - if (sirfport->tx_dma_chan) { - sirfport->tx_dma_state = TX_DMA_IDLE; - wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk, - SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) | - SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) | - SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4)); - } - sirfport->ms_enabled = false; - if (sirfport->uart_reg->uart_type == SIRF_USP_UART && - sirfport->hw_flow_ctrl) { - irq_modify_status(gpio_to_irq(sirfport->cts_gpio), - IRQ_NOREQUEST, IRQ_NOAUTOEN); - ret = request_irq(gpio_to_irq(sirfport->cts_gpio), - sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport); - if (ret != 0) { - dev_err(port->dev, "UART-USP:request gpio irq fail\n"); - goto init_rx_err; - } - } - if (sirfport->uart_reg->uart_type == SIRF_REAL_UART && - sirfport->rx_dma_chan) - wr_regl(port, ureg->sirfsoc_swh_dma_io, - SIRFUART_CLEAR_RX_ADDR_EN); - if (sirfport->uart_reg->uart_type == SIRF_USP_UART && - sirfport->rx_dma_chan) - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | - SIRFSOC_USP_FRADDR_CLR_EN); - if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) { - sirfport->is_hrt_enabled = true; - sirfport->rx_period_time = 20000000; - sirfport->rx_last_pos = -1; - sirfport->pio_fetch_cnt = 0; - sirfport->rx_dma_items.xmit.tail = - sirfport->rx_dma_items.xmit.head = 0; - hrtimer_start(&sirfport->hrt, - ns_to_ktime(sirfport->rx_period_time), - HRTIMER_MODE_REL); - } - wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); - if (sirfport->rx_dma_chan) - sirfsoc_uart_start_next_rx_dma(port); - else { - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) | - SIRFUART_RX_IO_INT_EN(uint_en, - sirfport->uart_reg->uart_type)); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - SIRFUART_RX_IO_INT_EN(uint_en, - sirfport->uart_reg->uart_type)); - } - enable_irq(port->irq); - - return 0; -init_rx_err: - free_irq(port->irq, sirfport); -irq_err: - return ret; -} - -static void sirfsoc_uart_shutdown(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct circ_buf *xmit; - - xmit = &sirfport->rx_dma_items.xmit; - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, 0); - else - wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL); - - free_irq(port->irq, sirfport); - if (sirfport->ms_enabled) - sirfsoc_uart_disable_ms(port); - if (sirfport->uart_reg->uart_type == SIRF_USP_UART && - sirfport->hw_flow_ctrl) { - gpio_set_value(sirfport->rts_gpio, 1); - free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport); - } - if (sirfport->tx_dma_chan) - sirfport->tx_dma_state = TX_DMA_IDLE; - if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) { - while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & - SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) && - !CIRC_CNT(xmit->head, xmit->tail, - SIRFSOC_RX_DMA_BUF_SIZE)) - ; - sirfport->is_hrt_enabled = false; - hrtimer_cancel(&sirfport->hrt); - } -} - -static const char *sirfsoc_uart_type(struct uart_port *port) -{ - return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL; -} - -static int sirfsoc_uart_request_port(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param; - void *ret; - ret = request_mem_region(port->mapbase, - SIRFUART_MAP_SIZE, uart_param->port_name); - return ret ? 0 : -EBUSY; -} - -static void sirfsoc_uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SIRFUART_MAP_SIZE); -} - -static void sirfsoc_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = SIRFSOC_PORT_TYPE; - sirfsoc_uart_request_port(port); - } -} - -static const struct uart_ops sirfsoc_uart_ops = { - .tx_empty = sirfsoc_uart_tx_empty, - .get_mctrl = sirfsoc_uart_get_mctrl, - .set_mctrl = sirfsoc_uart_set_mctrl, - .stop_tx = sirfsoc_uart_stop_tx, - .start_tx = sirfsoc_uart_start_tx, - .stop_rx = sirfsoc_uart_stop_rx, - .enable_ms = sirfsoc_uart_enable_ms, - .break_ctl = sirfsoc_uart_break_ctl, - .startup = sirfsoc_uart_startup, - .shutdown = sirfsoc_uart_shutdown, - .set_termios = sirfsoc_uart_set_termios, - .pm = sirfsoc_uart_pm, - .type = sirfsoc_uart_type, - .release_port = sirfsoc_uart_release_port, - .request_port = sirfsoc_uart_request_port, - .config_port = sirfsoc_uart_config_port, -}; - -#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE -static int __init -sirfsoc_uart_console_setup(struct console *co, char *options) -{ - unsigned int baud = 115200; - unsigned int bits = 8; - unsigned int parity = 'n'; - unsigned int flow = 'n'; - struct sirfsoc_uart_port *sirfport; - struct sirfsoc_register *ureg; - if (co->index < 0 || co->index >= SIRFSOC_UART_NR) - co->index = 1; - sirfport = sirf_ports[co->index]; - if (!sirfport) - return -ENODEV; - ureg = &sirfport->uart_reg->uart_reg; - if (!sirfport->port.mapbase) - return -ENODEV; - - /* enable usp in mode1 register */ - if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | - SIRFSOC_USP_ENDIAN_CTRL_LSBF); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - sirfport->port.cons = co; - - /* default console tx/rx transfer using io mode */ - sirfport->rx_dma_chan = NULL; - sirfport->tx_dma_chan = NULL; - return uart_set_options(&sirfport->port, co, baud, parity, bits, flow); -} - -static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_full(port)) - cpu_relax(); - wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch); -} - -static void sirfsoc_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct sirfsoc_uart_port *sirfport = sirf_ports[co->index]; - - uart_console_write(&sirfport->port, s, count, - sirfsoc_uart_console_putchar); -} - -static struct console sirfsoc_uart_console = { - .name = SIRFSOC_UART_NAME, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .write = sirfsoc_uart_console_write, - .setup = sirfsoc_uart_console_setup, - .data = &sirfsoc_uart_drv, -}; - -static int __init sirfsoc_uart_console_init(void) -{ - register_console(&sirfsoc_uart_console); - return 0; -} -console_initcall(sirfsoc_uart_console_init); -#endif - -static struct uart_driver sirfsoc_uart_drv = { - .owner = THIS_MODULE, - .driver_name = SIRFUART_PORT_NAME, - .nr = SIRFSOC_UART_NR, - .dev_name = SIRFSOC_UART_NAME, - .major = SIRFSOC_UART_MAJOR, - .minor = SIRFSOC_UART_MINOR, -#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE - .cons = &sirfsoc_uart_console, -#else - .cons = NULL, -#endif -}; - -static enum hrtimer_restart - sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt) -{ - struct sirfsoc_uart_port *sirfport; - struct uart_port *port; - int count, inserted; - struct dma_tx_state tx_state; - struct tty_struct *tty; - struct sirfsoc_register *ureg; - struct circ_buf *xmit; - struct sirfsoc_fifo_status *ufifo_st; - int max_pio_cnt; - - sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt); - port = &sirfport->port; - inserted = 0; - tty = port->state->port.tty; - ureg = &sirfport->uart_reg->uart_reg; - xmit = &sirfport->rx_dma_items.xmit; - ufifo_st = &sirfport->uart_reg->fifo_status; - - dmaengine_tx_status(sirfport->rx_dma_chan, - sirfport->rx_dma_items.cookie, &tx_state); - if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue != - sirfport->rx_last_pos) { - xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; - sirfport->rx_last_pos = xmit->head; - sirfport->pio_fetch_cnt = 0; - } - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, - SIRFSOC_RX_DMA_BUF_SIZE); - while (count > 0) { - inserted = tty_insert_flip_string(tty->port, - (const unsigned char *)&xmit->buf[xmit->tail], count); - if (!inserted) - goto next_hrt; - port->icount.rx += inserted; - xmit->tail = (xmit->tail + inserted) & - (SIRFSOC_RX_DMA_BUF_SIZE - 1); - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, - SIRFSOC_RX_DMA_BUF_SIZE); - tty_flip_buffer_push(tty->port); - } - /* - * if RX DMA buffer data have all push into tty buffer, and there is - * only little data(less than a dma transfer unit) left in rxfifo, - * fetch it out in pio mode and switch back to dma immediately - */ - if (!inserted && !count && - ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & - SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) { - dmaengine_pause(sirfport->rx_dma_chan); - /* switch to pio mode */ - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | - SIRFUART_IO_MODE); - /* - * UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN - * When found changing I/O to DMA mode, it clears - * two low bits of read point; - * USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL. - * Fetch data out from rxfifo into DMA buffer in PIO mode, - * while switch back to DMA mode, the data fetched will override - * by DMA, as hardware have a strange behaviour: - * after switch back to DMA mode, check rxfifo status it will - * be the number PIO fetched, so record the fetched data count - * to avoid the repeated fetch - */ - max_pio_cnt = 3; - while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & - ufifo_st->ff_empty(port)) && max_pio_cnt--) { - xmit->buf[xmit->head] = - rd_regl(port, ureg->sirfsoc_rx_fifo_data); - xmit->head = (xmit->head + 1) & - (SIRFSOC_RX_DMA_BUF_SIZE - 1); - sirfport->pio_fetch_cnt++; - } - /* switch back to dma mode */ - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & - ~SIRFUART_IO_MODE); - dmaengine_resume(sirfport->rx_dma_chan); - } -next_hrt: - hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time)); - return HRTIMER_RESTART; -} - -static const struct of_device_id sirfsoc_uart_ids[] = { - { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, - { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, - { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, - { .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp}, - {} -}; -MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); - -static int sirfsoc_uart_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct sirfsoc_uart_port *sirfport; - struct uart_port *port; - struct resource *res; - int ret; - struct dma_slave_config slv_cfg = { - .src_maxburst = 1, - }; - struct dma_slave_config tx_slv_cfg = { - .dst_maxburst = 2, - }; - const struct of_device_id *match; - - match = of_match_node(sirfsoc_uart_ids, np); - sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL); - if (!sirfport) { - ret = -ENOMEM; - goto err; - } - sirfport->port.line = of_alias_get_id(np, "serial"); - if (sirfport->port.line >= ARRAY_SIZE(sirf_ports)) { - dev_err(&pdev->dev, "serial%d out of range\n", - sirfport->port.line); - return -EINVAL; - } - sirf_ports[sirfport->port.line] = sirfport; - sirfport->port.iotype = UPIO_MEM; - sirfport->port.flags = UPF_BOOT_AUTOCONF; - port = &sirfport->port; - port->dev = &pdev->dev; - port->private_data = sirfport; - sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data; - - sirfport->hw_flow_ctrl = - of_property_read_bool(np, "uart-has-rtscts") || - of_property_read_bool(np, "sirf,uart-has-rtscts") /* deprecated */; - if (of_device_is_compatible(np, "sirf,prima2-uart") || - of_device_is_compatible(np, "sirf,atlas7-uart")) - sirfport->uart_reg->uart_type = SIRF_REAL_UART; - if (of_device_is_compatible(np, "sirf,prima2-usp-uart") || - of_device_is_compatible(np, "sirf,atlas7-usp-uart")) { - sirfport->uart_reg->uart_type = SIRF_USP_UART; - if (!sirfport->hw_flow_ctrl) - goto usp_no_flow_control; - if (of_find_property(np, "cts-gpios", NULL)) - sirfport->cts_gpio = - of_get_named_gpio(np, "cts-gpios", 0); - else - sirfport->cts_gpio = -1; - if (of_find_property(np, "rts-gpios", NULL)) - sirfport->rts_gpio = - of_get_named_gpio(np, "rts-gpios", 0); - else - sirfport->rts_gpio = -1; - - if ((!gpio_is_valid(sirfport->cts_gpio) || - !gpio_is_valid(sirfport->rts_gpio))) { - ret = -EINVAL; - dev_err(&pdev->dev, - "Usp flow control must have cts and rts gpio"); - goto err; - } - ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio, - "usp-cts-gpio"); - if (ret) { - dev_err(&pdev->dev, "Unable request cts gpio"); - goto err; - } - gpio_direction_input(sirfport->cts_gpio); - ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio, - "usp-rts-gpio"); - if (ret) { - dev_err(&pdev->dev, "Unable request rts gpio"); - goto err; - } - gpio_direction_output(sirfport->rts_gpio, 1); - } -usp_no_flow_control: - if (of_device_is_compatible(np, "sirf,atlas7-uart") || - of_device_is_compatible(np, "sirf,atlas7-usp-uart")) - sirfport->is_atlas7 = true; - - if (of_property_read_u32(np, "fifosize", &port->fifosize)) { - dev_err(&pdev->dev, - "Unable to find fifosize in uart node.\n"); - ret = -EFAULT; - goto err; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Insufficient resources.\n"); - ret = -EFAULT; - goto err; - } - port->mapbase = res->start; - port->membase = devm_ioremap(&pdev->dev, - res->start, resource_size(res)); - if (!port->membase) { - dev_err(&pdev->dev, "Cannot remap resource.\n"); - ret = -ENOMEM; - goto err; - } - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Insufficient resources.\n"); - ret = -EFAULT; - goto err; - } - port->irq = res->start; - - sirfport->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(sirfport->clk)) { - ret = PTR_ERR(sirfport->clk); - goto err; - } - port->uartclk = clk_get_rate(sirfport->clk); - - port->ops = &sirfsoc_uart_ops; - spin_lock_init(&port->lock); - - platform_set_drvdata(pdev, sirfport); - ret = uart_add_one_port(&sirfsoc_uart_drv, port); - if (ret != 0) { - dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id); - goto err; - } - - sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); - sirfport->rx_dma_items.xmit.buf = - dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - &sirfport->rx_dma_items.dma_addr, GFP_KERNEL); - if (!sirfport->rx_dma_items.xmit.buf) { - dev_err(port->dev, "Uart alloc bufa failed\n"); - ret = -ENOMEM; - goto alloc_coherent_err; - } - sirfport->rx_dma_items.xmit.head = - sirfport->rx_dma_items.xmit.tail = 0; - if (sirfport->rx_dma_chan) - dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); - sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx"); - if (sirfport->tx_dma_chan) - dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); - if (sirfport->rx_dma_chan) { - hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback; - sirfport->is_hrt_enabled = false; - } - - return 0; -alloc_coherent_err: - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items.xmit.buf, - sirfport->rx_dma_items.dma_addr); - dma_release_channel(sirfport->rx_dma_chan); -err: - return ret; -} - -static int sirfsoc_uart_remove(struct platform_device *pdev) -{ - struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); - struct uart_port *port = &sirfport->port; - uart_remove_one_port(&sirfsoc_uart_drv, port); - if (sirfport->rx_dma_chan) { - dmaengine_terminate_all(sirfport->rx_dma_chan); - dma_release_channel(sirfport->rx_dma_chan); - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items.xmit.buf, - sirfport->rx_dma_items.dma_addr); - } - if (sirfport->tx_dma_chan) { - dmaengine_terminate_all(sirfport->tx_dma_chan); - dma_release_channel(sirfport->tx_dma_chan); - } - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int -sirfsoc_uart_suspend(struct device *pdev) -{ - struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); - struct uart_port *port = &sirfport->port; - uart_suspend_port(&sirfsoc_uart_drv, port); - return 0; -} - -static int sirfsoc_uart_resume(struct device *pdev) -{ - struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); - struct uart_port *port = &sirfport->port; - uart_resume_port(&sirfsoc_uart_drv, port); - return 0; -} -#endif - -static const struct dev_pm_ops sirfsoc_uart_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume) -}; - -static struct platform_driver sirfsoc_uart_driver = { - .probe = sirfsoc_uart_probe, - .remove = sirfsoc_uart_remove, - .driver = { - .name = SIRFUART_PORT_NAME, - .of_match_table = sirfsoc_uart_ids, - .pm = &sirfsoc_uart_pm_ops, - }, -}; - -static int __init sirfsoc_uart_init(void) -{ - int ret = 0; - - ret = uart_register_driver(&sirfsoc_uart_drv); - if (ret) - goto out; - - ret = platform_driver_register(&sirfsoc_uart_driver); - if (ret) - uart_unregister_driver(&sirfsoc_uart_drv); -out: - return ret; -} -module_init(sirfsoc_uart_init); - -static void __exit sirfsoc_uart_exit(void) -{ - platform_driver_unregister(&sirfsoc_uart_driver); - uart_unregister_driver(&sirfsoc_uart_drv); -} -module_exit(sirfsoc_uart_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Bin Shi , Rong Wang"); -MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver"); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h deleted file mode 100644 index fb88ac565227..000000000000 --- a/drivers/tty/serial/sirfsoc_uart.h +++ /dev/null @@ -1,447 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Drivers for CSR SiRFprimaII onboard UARTs. - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ -#include -#include -#include -struct sirfsoc_uart_param { - const char *uart_name; - const char *port_name; -}; - -struct sirfsoc_register { - /* hardware uart specific */ - u32 sirfsoc_line_ctrl; - u32 sirfsoc_divisor; - /* uart - usp common */ - u32 sirfsoc_tx_rx_en; - u32 sirfsoc_int_en_reg; - u32 sirfsoc_int_st_reg; - u32 sirfsoc_int_en_clr_reg; - u32 sirfsoc_tx_dma_io_ctrl; - u32 sirfsoc_tx_dma_io_len; - u32 sirfsoc_tx_fifo_ctrl; - u32 sirfsoc_tx_fifo_level_chk; - u32 sirfsoc_tx_fifo_op; - u32 sirfsoc_tx_fifo_status; - u32 sirfsoc_tx_fifo_data; - u32 sirfsoc_rx_dma_io_ctrl; - u32 sirfsoc_rx_dma_io_len; - u32 sirfsoc_rx_fifo_ctrl; - u32 sirfsoc_rx_fifo_level_chk; - u32 sirfsoc_rx_fifo_op; - u32 sirfsoc_rx_fifo_status; - u32 sirfsoc_rx_fifo_data; - u32 sirfsoc_afc_ctrl; - u32 sirfsoc_swh_dma_io; - /* hardware usp specific */ - u32 sirfsoc_mode1; - u32 sirfsoc_mode2; - u32 sirfsoc_tx_frame_ctrl; - u32 sirfsoc_rx_frame_ctrl; - u32 sirfsoc_async_param_reg; -}; - -typedef u32 (*fifo_full_mask)(struct uart_port *port); -typedef u32 (*fifo_empty_mask)(struct uart_port *port); - -struct sirfsoc_fifo_status { - fifo_full_mask ff_full; - fifo_empty_mask ff_empty; -}; - -struct sirfsoc_int_en { - u32 sirfsoc_rx_done_en; - u32 sirfsoc_tx_done_en; - u32 sirfsoc_rx_oflow_en; - u32 sirfsoc_tx_allout_en; - u32 sirfsoc_rx_io_dma_en; - u32 sirfsoc_tx_io_dma_en; - u32 sirfsoc_rxfifo_full_en; - u32 sirfsoc_txfifo_empty_en; - u32 sirfsoc_rxfifo_thd_en; - u32 sirfsoc_txfifo_thd_en; - u32 sirfsoc_frm_err_en; - u32 sirfsoc_rxd_brk_en; - u32 sirfsoc_rx_timeout_en; - u32 sirfsoc_parity_err_en; - u32 sirfsoc_cts_en; - u32 sirfsoc_rts_en; -}; - -struct sirfsoc_int_status { - u32 sirfsoc_rx_done; - u32 sirfsoc_tx_done; - u32 sirfsoc_rx_oflow; - u32 sirfsoc_tx_allout; - u32 sirfsoc_rx_io_dma; - u32 sirfsoc_tx_io_dma; - u32 sirfsoc_rxfifo_full; - u32 sirfsoc_txfifo_empty; - u32 sirfsoc_rxfifo_thd; - u32 sirfsoc_txfifo_thd; - u32 sirfsoc_frm_err; - u32 sirfsoc_rxd_brk; - u32 sirfsoc_rx_timeout; - u32 sirfsoc_parity_err; - u32 sirfsoc_cts; - u32 sirfsoc_rts; -}; - -enum sirfsoc_uart_type { - SIRF_REAL_UART, - SIRF_USP_UART, -}; - -struct sirfsoc_uart_register { - struct sirfsoc_register uart_reg; - struct sirfsoc_int_en uart_int_en; - struct sirfsoc_int_status uart_int_st; - struct sirfsoc_fifo_status fifo_status; - struct sirfsoc_uart_param uart_param; - enum sirfsoc_uart_type uart_type; -}; - -static u32 uart_usp_ff_full_mask(struct uart_port *port) -{ - u32 full_bit; - - full_bit = ilog2(port->fifosize); - return (1 << full_bit); -} - -static u32 uart_usp_ff_empty_mask(struct uart_port *port) -{ - u32 empty_bit; - - empty_bit = ilog2(port->fifosize) + 1; - return (1 << empty_bit); -} - -static struct sirfsoc_uart_register sirfsoc_usp = { - .uart_reg = { - .sirfsoc_mode1 = 0x0000, - .sirfsoc_mode2 = 0x0004, - .sirfsoc_tx_frame_ctrl = 0x0008, - .sirfsoc_rx_frame_ctrl = 0x000c, - .sirfsoc_tx_rx_en = 0x0010, - .sirfsoc_int_en_reg = 0x0014, - .sirfsoc_int_st_reg = 0x0018, - .sirfsoc_async_param_reg = 0x0024, - .sirfsoc_tx_dma_io_ctrl = 0x0100, - .sirfsoc_tx_dma_io_len = 0x0104, - .sirfsoc_tx_fifo_ctrl = 0x0108, - .sirfsoc_tx_fifo_level_chk = 0x010c, - .sirfsoc_tx_fifo_op = 0x0110, - .sirfsoc_tx_fifo_status = 0x0114, - .sirfsoc_tx_fifo_data = 0x0118, - .sirfsoc_rx_dma_io_ctrl = 0x0120, - .sirfsoc_rx_dma_io_len = 0x0124, - .sirfsoc_rx_fifo_ctrl = 0x0128, - .sirfsoc_rx_fifo_level_chk = 0x012c, - .sirfsoc_rx_fifo_op = 0x0130, - .sirfsoc_rx_fifo_status = 0x0134, - .sirfsoc_rx_fifo_data = 0x0138, - .sirfsoc_int_en_clr_reg = 0x140, - }, - .uart_int_en = { - .sirfsoc_rx_done_en = BIT(0), - .sirfsoc_tx_done_en = BIT(1), - .sirfsoc_rx_oflow_en = BIT(2), - .sirfsoc_tx_allout_en = BIT(3), - .sirfsoc_rx_io_dma_en = BIT(4), - .sirfsoc_tx_io_dma_en = BIT(5), - .sirfsoc_rxfifo_full_en = BIT(6), - .sirfsoc_txfifo_empty_en = BIT(7), - .sirfsoc_rxfifo_thd_en = BIT(8), - .sirfsoc_txfifo_thd_en = BIT(9), - .sirfsoc_frm_err_en = BIT(10), - .sirfsoc_rx_timeout_en = BIT(11), - .sirfsoc_rxd_brk_en = BIT(15), - }, - .uart_int_st = { - .sirfsoc_rx_done = BIT(0), - .sirfsoc_tx_done = BIT(1), - .sirfsoc_rx_oflow = BIT(2), - .sirfsoc_tx_allout = BIT(3), - .sirfsoc_rx_io_dma = BIT(4), - .sirfsoc_tx_io_dma = BIT(5), - .sirfsoc_rxfifo_full = BIT(6), - .sirfsoc_txfifo_empty = BIT(7), - .sirfsoc_rxfifo_thd = BIT(8), - .sirfsoc_txfifo_thd = BIT(9), - .sirfsoc_frm_err = BIT(10), - .sirfsoc_rx_timeout = BIT(11), - .sirfsoc_rxd_brk = BIT(15), - }, - .fifo_status = { - .ff_full = uart_usp_ff_full_mask, - .ff_empty = uart_usp_ff_empty_mask, - }, - .uart_param = { - .uart_name = "ttySiRF", - .port_name = "sirfsoc-uart", - }, -}; - -static struct sirfsoc_uart_register sirfsoc_uart = { - .uart_reg = { - .sirfsoc_line_ctrl = 0x0040, - .sirfsoc_tx_rx_en = 0x004c, - .sirfsoc_divisor = 0x0050, - .sirfsoc_int_en_reg = 0x0054, - .sirfsoc_int_st_reg = 0x0058, - .sirfsoc_int_en_clr_reg = 0x0060, - .sirfsoc_tx_dma_io_ctrl = 0x0100, - .sirfsoc_tx_dma_io_len = 0x0104, - .sirfsoc_tx_fifo_ctrl = 0x0108, - .sirfsoc_tx_fifo_level_chk = 0x010c, - .sirfsoc_tx_fifo_op = 0x0110, - .sirfsoc_tx_fifo_status = 0x0114, - .sirfsoc_tx_fifo_data = 0x0118, - .sirfsoc_rx_dma_io_ctrl = 0x0120, - .sirfsoc_rx_dma_io_len = 0x0124, - .sirfsoc_rx_fifo_ctrl = 0x0128, - .sirfsoc_rx_fifo_level_chk = 0x012c, - .sirfsoc_rx_fifo_op = 0x0130, - .sirfsoc_rx_fifo_status = 0x0134, - .sirfsoc_rx_fifo_data = 0x0138, - .sirfsoc_afc_ctrl = 0x0140, - .sirfsoc_swh_dma_io = 0x0148, - }, - .uart_int_en = { - .sirfsoc_rx_done_en = BIT(0), - .sirfsoc_tx_done_en = BIT(1), - .sirfsoc_rx_oflow_en = BIT(2), - .sirfsoc_tx_allout_en = BIT(3), - .sirfsoc_rx_io_dma_en = BIT(4), - .sirfsoc_tx_io_dma_en = BIT(5), - .sirfsoc_rxfifo_full_en = BIT(6), - .sirfsoc_txfifo_empty_en = BIT(7), - .sirfsoc_rxfifo_thd_en = BIT(8), - .sirfsoc_txfifo_thd_en = BIT(9), - .sirfsoc_frm_err_en = BIT(10), - .sirfsoc_rxd_brk_en = BIT(11), - .sirfsoc_rx_timeout_en = BIT(12), - .sirfsoc_parity_err_en = BIT(13), - .sirfsoc_cts_en = BIT(14), - .sirfsoc_rts_en = BIT(15), - }, - .uart_int_st = { - .sirfsoc_rx_done = BIT(0), - .sirfsoc_tx_done = BIT(1), - .sirfsoc_rx_oflow = BIT(2), - .sirfsoc_tx_allout = BIT(3), - .sirfsoc_rx_io_dma = BIT(4), - .sirfsoc_tx_io_dma = BIT(5), - .sirfsoc_rxfifo_full = BIT(6), - .sirfsoc_txfifo_empty = BIT(7), - .sirfsoc_rxfifo_thd = BIT(8), - .sirfsoc_txfifo_thd = BIT(9), - .sirfsoc_frm_err = BIT(10), - .sirfsoc_rxd_brk = BIT(11), - .sirfsoc_rx_timeout = BIT(12), - .sirfsoc_parity_err = BIT(13), - .sirfsoc_cts = BIT(14), - .sirfsoc_rts = BIT(15), - }, - .fifo_status = { - .ff_full = uart_usp_ff_full_mask, - .ff_empty = uart_usp_ff_empty_mask, - }, - .uart_param = { - .uart_name = "ttySiRF", - .port_name = "sirfsoc_uart", - }, -}; -/* uart io ctrl */ -#define SIRFUART_DATA_BIT_LEN_MASK 0x3 -#define SIRFUART_DATA_BIT_LEN_5 BIT(0) -#define SIRFUART_DATA_BIT_LEN_6 1 -#define SIRFUART_DATA_BIT_LEN_7 2 -#define SIRFUART_DATA_BIT_LEN_8 3 -#define SIRFUART_STOP_BIT_LEN_1 0 -#define SIRFUART_STOP_BIT_LEN_2 BIT(2) -#define SIRFUART_PARITY_EN BIT(3) -#define SIRFUART_EVEN_BIT BIT(4) -#define SIRFUART_STICK_BIT_MASK (7 << 3) -#define SIRFUART_STICK_BIT_NONE (0 << 3) -#define SIRFUART_STICK_BIT_EVEN BIT(3) -#define SIRFUART_STICK_BIT_ODD (3 << 3) -#define SIRFUART_STICK_BIT_MARK (5 << 3) -#define SIRFUART_STICK_BIT_SPACE (7 << 3) -#define SIRFUART_SET_BREAK BIT(6) -#define SIRFUART_LOOP_BACK BIT(7) -#define SIRFUART_PARITY_MASK (7 << 3) -#define SIRFUART_DUMMY_READ BIT(16) -#define SIRFUART_AFC_CTRL_RX_THD 0x70 -#define SIRFUART_AFC_RX_EN BIT(8) -#define SIRFUART_AFC_TX_EN BIT(9) -#define SIRFUART_AFC_CTS_CTRL BIT(10) -#define SIRFUART_AFC_RTS_CTRL BIT(11) -#define SIRFUART_AFC_CTS_STATUS BIT(12) -#define SIRFUART_AFC_RTS_STATUS BIT(13) -/* UART FIFO Register */ -#define SIRFUART_FIFO_STOP 0x0 -#define SIRFUART_FIFO_RESET BIT(0) -#define SIRFUART_FIFO_START BIT(1) - -#define SIRFUART_RX_EN BIT(0) -#define SIRFUART_TX_EN BIT(1) - -#define SIRFUART_IO_MODE BIT(0) -#define SIRFUART_DMA_MODE 0x0 -#define SIRFUART_RX_DMA_FLUSH 0x4 - -#define SIRFUART_CLEAR_RX_ADDR_EN 0x2 -/* Baud Rate Calculation */ -#define SIRF_USP_MIN_SAMPLE_DIV 0x1 -#define SIRF_MIN_SAMPLE_DIV 0xf -#define SIRF_MAX_SAMPLE_DIV 0x3f -#define SIRF_IOCLK_DIV_MAX 0xffff -#define SIRF_SAMPLE_DIV_SHIFT 16 -#define SIRF_IOCLK_DIV_MASK 0xffff -#define SIRF_SAMPLE_DIV_MASK 0x3f0000 -#define SIRF_BAUD_RATE_SUPPORT_NR 18 - -/* USP SPEC */ -#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4) -#define SIRFSOC_USP_EN BIT(5) -#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0 -#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8 -#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff -#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21 -#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0 -#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8 -#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16 -#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24 -#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30 -#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0 -#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8 -#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16 -#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24 -#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f -#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16 -#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2) -#define SIRFSOC_USP_FRADDR_CLR_EN BIT(1) -/* USP-UART Common */ -#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) -#define SIRFUART_RECV_TIMEOUT_VALUE(x) \ - (((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF)) -#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF) -#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16) - -#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1) -#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \ - (uint_st->sirfsoc_rx_oflow | \ - uint_st->sirfsoc_frm_err | \ - uint_st->sirfsoc_rxd_brk | \ - ((uart_type != SIRF_REAL_UART) ? \ - 0 : uint_st->sirfsoc_parity_err)) -#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \ - (uint_en->sirfsoc_rx_done_en |\ - uint_en->sirfsoc_rxfifo_thd_en |\ - uint_en->sirfsoc_rxfifo_full_en |\ - uint_en->sirfsoc_frm_err_en |\ - uint_en->sirfsoc_rx_oflow_en |\ - uint_en->sirfsoc_rxd_brk_en |\ - ((uart_type != SIRF_REAL_UART) ? \ - 0 : uint_en->sirfsoc_parity_err_en)) -#define SIRFUART_RX_IO_INT_ST(uint_st) \ - (uint_st->sirfsoc_rxfifo_thd |\ - uint_st->sirfsoc_rxfifo_full|\ - uint_st->sirfsoc_rx_done |\ - uint_st->sirfsoc_rx_timeout) -#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts) -#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \ - (uint_en->sirfsoc_frm_err_en |\ - uint_en->sirfsoc_rx_oflow_en |\ - uint_en->sirfsoc_rxd_brk_en |\ - ((uart_type != SIRF_REAL_UART) ? \ - 0 : uint_en->sirfsoc_parity_err_en)) -/* Generic Definitions */ -#define SIRFSOC_UART_NAME "ttySiRF" -#define SIRFSOC_UART_MAJOR 0 -#define SIRFSOC_UART_MINOR 0 -#define SIRFUART_PORT_NAME "sirfsoc-uart" -#define SIRFUART_MAP_SIZE 0x200 -#define SIRFSOC_UART_NR 11 -#define SIRFSOC_PORT_TYPE 0xa5 - -/* Uart Common Use Macro*/ -#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32) -#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3) -/* Uart Fifo Level Chk */ -#define SIRFUART_TX_FIFO_SC_OFFSET 0 -#define SIRFUART_TX_FIFO_LC_OFFSET 10 -#define SIRFUART_TX_FIFO_HC_OFFSET 20 -#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\ - (value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET) -#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\ - (value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET) -#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\ - (value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET) - -#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC -#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC -#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC -#define SIRFUART_RX_FIFO_MASK 0x7f -/* Indicate how many buffers used */ - -/* For Fast Baud Rate Calculation */ -struct sirfsoc_baudrate_to_regv { - unsigned int baud_rate; - unsigned int reg_val; -}; - -enum sirfsoc_tx_state { - TX_DMA_IDLE, - TX_DMA_RUNNING, - TX_DMA_PAUSE, -}; - -struct sirfsoc_rx_buffer { - struct circ_buf xmit; - dma_cookie_t cookie; - struct dma_async_tx_descriptor *desc; - dma_addr_t dma_addr; -}; - -struct sirfsoc_uart_port { - bool hw_flow_ctrl; - bool ms_enabled; - - struct uart_port port; - struct clk *clk; - /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ - bool is_atlas7; - struct sirfsoc_uart_register *uart_reg; - struct dma_chan *rx_dma_chan; - struct dma_chan *tx_dma_chan; - dma_addr_t tx_dma_addr; - struct dma_async_tx_descriptor *tx_dma_desc; - unsigned long transfer_size; - enum sirfsoc_tx_state tx_dma_state; - unsigned int cts_gpio; - unsigned int rts_gpio; - - struct sirfsoc_rx_buffer rx_dma_items; - struct hrtimer hrt; - bool is_hrt_enabled; - unsigned long rx_period_time; - unsigned long rx_last_pos; - unsigned long pio_fetch_cnt; -}; - -/* Register Access Control */ -#define portaddr(port, reg) ((port)->membase + (reg)) -#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) -#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) - -/* UART Port Mask */ -#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF) -#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF) -#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index f4de32d3f2af..dde6d526362d 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -3,7 +3,8 @@ * Copyright (C) Maxime Coquelin 2015 * Copyright (C) STMicroelectronics SA 2017 * Authors: Maxime Coquelin - * Gerald Baeza + * Gerald Baeza + * Erwan Le Ray * * Inspired by st-asc.c from STMicroelectronics (c) */ @@ -34,15 +35,15 @@ #include "serial_mctrl_gpio.h" #include "stm32-usart.h" -static void stm32_stop_tx(struct uart_port *port); -static void stm32_transmit_chars(struct uart_port *port); +static void stm32_usart_stop_tx(struct uart_port *port); +static void stm32_usart_transmit_chars(struct uart_port *port); static inline struct stm32_port *to_stm32_port(struct uart_port *port) { return container_of(port, struct stm32_port, port); } -static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits) +static void stm32_usart_set_bits(struct uart_port *port, u32 reg, u32 bits) { u32 val; @@ -51,7 +52,7 @@ static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits) writel_relaxed(val, port->membase + reg); } -static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits) +static void stm32_usart_clr_bits(struct uart_port *port, u32 reg, u32 bits) { u32 val; @@ -60,8 +61,8 @@ static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits) writel_relaxed(val, port->membase + reg); } -static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, - u32 delay_DDE, u32 baud) +static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, + u32 delay_DDE, u32 baud) { u32 rs485_deat_dedt; u32 rs485_deat_dedt_max = (USART_CR1_DEAT_MASK >> USART_CR1_DEAT_SHIFT); @@ -95,8 +96,8 @@ static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, *cr1 |= rs485_deat_dedt; } -static int stm32_config_rs485(struct uart_port *port, - struct serial_rs485 *rs485conf) +static int stm32_usart_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485conf) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -104,7 +105,7 @@ static int stm32_config_rs485(struct uart_port *port, u32 usartdiv, baud, cr1, cr3; bool over8; - stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); port->rs485 = *rs485conf; @@ -122,9 +123,10 @@ static int stm32_config_rs485(struct uart_port *port, << USART_BRR_04_R_SHIFT; baud = DIV_ROUND_CLOSEST(port->uartclk, usartdiv); - stm32_config_reg_rs485(&cr1, &cr3, - rs485conf->delay_rts_before_send, - rs485conf->delay_rts_after_send, baud); + stm32_usart_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, + baud); if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { cr3 &= ~USART_CR3_DEP; @@ -137,18 +139,19 @@ static int stm32_config_rs485(struct uart_port *port, writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); } else { - stm32_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP); - stm32_clr_bits(port, ofs->cr1, - USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + stm32_usart_clr_bits(port, ofs->cr3, + USART_CR3_DEM | USART_CR3_DEP); + stm32_usart_clr_bits(port, ofs->cr1, + USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); } - stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); return 0; } -static int stm32_init_rs485(struct uart_port *port, - struct platform_device *pdev) +static int stm32_usart_init_rs485(struct uart_port *port, + struct platform_device *pdev) { struct serial_rs485 *rs485conf = &port->rs485; @@ -162,8 +165,8 @@ static int stm32_init_rs485(struct uart_port *port, return uart_get_rs485_mode(port); } -static int stm32_pending_rx(struct uart_port *port, u32 *sr, int *last_res, - bool threaded) +static int stm32_usart_pending_rx(struct uart_port *port, u32 *sr, + int *last_res, bool threaded) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -176,8 +179,7 @@ static int stm32_pending_rx(struct uart_port *port, u32 *sr, int *last_res, status = dmaengine_tx_status(stm32_port->rx_ch, stm32_port->rx_ch->cookie, &state); - if ((status == DMA_IN_PROGRESS) && - (*last_res != state.residue)) + if (status == DMA_IN_PROGRESS && (*last_res != state.residue)) return 1; else return 0; @@ -187,8 +189,8 @@ static int stm32_pending_rx(struct uart_port *port, u32 *sr, int *last_res, return 0; } -static unsigned long stm32_get_char(struct uart_port *port, u32 *sr, - int *last_res) +static unsigned long stm32_usart_get_char(struct uart_port *port, u32 *sr, + int *last_res) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -207,7 +209,7 @@ static unsigned long stm32_get_char(struct uart_port *port, u32 *sr, return c; } -static void stm32_receive_chars(struct uart_port *port, bool threaded) +static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) { struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); @@ -219,7 +221,8 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded) if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); - while (stm32_pending_rx(port, &sr, &stm32_port->last_res, threaded)) { + while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res, + threaded)) { sr |= USART_SR_DUMMY_RX; flag = TTY_NORMAL; @@ -238,7 +241,7 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded) writel_relaxed(sr & USART_SR_ERR_MASK, port->membase + ofs->icr); - c = stm32_get_char(port, &sr, &stm32_port->last_res); + c = stm32_usart_get_char(port, &sr, &stm32_port->last_res); port->icount.rx++; if (sr & USART_SR_ERR_MASK) { if (sr & USART_SR_ORE) { @@ -278,20 +281,20 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded) spin_lock(&port->lock); } -static void stm32_tx_dma_complete(void *arg) +static void stm32_usart_tx_dma_complete(void *arg) { struct uart_port *port = arg; struct stm32_port *stm32port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32port->info->ofs; - stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); stm32port->tx_dma_busy = false; /* Let's see if we have pending data to send */ - stm32_transmit_chars(port); + stm32_usart_transmit_chars(port); } -static void stm32_tx_interrupt_enable(struct uart_port *port) +static void stm32_usart_tx_interrupt_enable(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -301,30 +304,30 @@ static void stm32_tx_interrupt_enable(struct uart_port *port) * or TX empty irq when FIFO is disabled */ if (stm32_port->fifoen) - stm32_set_bits(port, ofs->cr3, USART_CR3_TXFTIE); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_TXFTIE); else - stm32_set_bits(port, ofs->cr1, USART_CR1_TXEIE); + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE); } -static void stm32_tx_interrupt_disable(struct uart_port *port) +static void stm32_usart_tx_interrupt_disable(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; if (stm32_port->fifoen) - stm32_clr_bits(port, ofs->cr3, USART_CR3_TXFTIE); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_TXFTIE); else - stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); } -static void stm32_transmit_chars_pio(struct uart_port *port) +static void stm32_usart_transmit_chars_pio(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; if (stm32_port->tx_dma_busy) { - stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); stm32_port->tx_dma_busy = false; } @@ -339,12 +342,12 @@ static void stm32_transmit_chars_pio(struct uart_port *port) /* rely on TXE irq (mask or unmask) for sending remaining data */ if (uart_circ_empty(xmit)) - stm32_tx_interrupt_disable(port); + stm32_usart_tx_interrupt_disable(port); else - stm32_tx_interrupt_enable(port); + stm32_usart_tx_interrupt_enable(port); } -static void stm32_transmit_chars_dma(struct uart_port *port) +static void stm32_usart_transmit_chars_dma(struct uart_port *port) { struct stm32_port *stm32port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32port->info->ofs; @@ -383,28 +386,34 @@ static void stm32_transmit_chars_dma(struct uart_port *port) DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); - if (!desc) { - for (i = count; i > 0; i--) - stm32_transmit_chars_pio(port); - return; - } + if (!desc) + goto fallback_err; - desc->callback = stm32_tx_dma_complete; + desc->callback = stm32_usart_tx_dma_complete; desc->callback_param = port; /* Push current DMA TX transaction in the pending queue */ - dmaengine_submit(desc); + if (dma_submit_error(dmaengine_submit(desc))) { + /* dma no yet started, safe to free resources */ + dmaengine_terminate_async(stm32port->tx_ch); + goto fallback_err; + } /* Issue pending DMA TX requests */ dma_async_issue_pending(stm32port->tx_ch); - stm32_set_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT); xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); port->icount.tx += count; + return; + +fallback_err: + for (i = count; i > 0; i--) + stm32_usart_transmit_chars_pio(port); } -static void stm32_transmit_chars(struct uart_port *port) +static void stm32_usart_transmit_chars(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -412,38 +421,38 @@ static void stm32_transmit_chars(struct uart_port *port) if (port->x_char) { if (stm32_port->tx_dma_busy) - stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++; if (stm32_port->tx_dma_busy) - stm32_set_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT); return; } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - stm32_tx_interrupt_disable(port); + stm32_usart_tx_interrupt_disable(port); return; } if (ofs->icr == UNDEF_REG) - stm32_clr_bits(port, ofs->isr, USART_SR_TC); + stm32_usart_clr_bits(port, ofs->isr, USART_SR_TC); else writel_relaxed(USART_ICR_TCCF, port->membase + ofs->icr); if (stm32_port->tx_ch) - stm32_transmit_chars_dma(port); + stm32_usart_transmit_chars_dma(port); else - stm32_transmit_chars_pio(port); + stm32_usart_transmit_chars_pio(port); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (uart_circ_empty(xmit)) - stm32_tx_interrupt_disable(port); + stm32_usart_tx_interrupt_disable(port); } -static irqreturn_t stm32_interrupt(int irq, void *ptr) +static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port); @@ -458,15 +467,15 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr) writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); - if ((sr & USART_SR_WUF) && (ofs->icr != UNDEF_REG)) + if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) writel_relaxed(USART_ICR_WUCF, port->membase + ofs->icr); if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) - stm32_receive_chars(port, false); + stm32_usart_receive_chars(port, false); if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) - stm32_transmit_chars(port); + stm32_usart_transmit_chars(port); spin_unlock(&port->lock); @@ -476,7 +485,7 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr) return IRQ_HANDLED; } -static irqreturn_t stm32_threaded_interrupt(int irq, void *ptr) +static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port); @@ -484,14 +493,14 @@ static irqreturn_t stm32_threaded_interrupt(int irq, void *ptr) spin_lock(&port->lock); if (stm32_port->rx_ch) - stm32_receive_chars(port, true); + stm32_usart_receive_chars(port, true); spin_unlock(&port->lock); return IRQ_HANDLED; } -static unsigned int stm32_tx_empty(struct uart_port *port) +static unsigned int stm32_usart_tx_empty(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -499,20 +508,20 @@ static unsigned int stm32_tx_empty(struct uart_port *port) return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE; } -static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl) +static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) - stm32_set_bits(port, ofs->cr3, USART_CR3_RTSE); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_RTSE); else - stm32_clr_bits(port, ofs->cr3, USART_CR3_RTSE); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_RTSE); mctrl_gpio_set(stm32_port->gpios, mctrl); } -static unsigned int stm32_get_mctrl(struct uart_port *port) +static unsigned int stm32_usart_get_mctrl(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); unsigned int ret; @@ -523,23 +532,23 @@ static unsigned int stm32_get_mctrl(struct uart_port *port) return mctrl_gpio_get(stm32_port->gpios, &ret); } -static void stm32_enable_ms(struct uart_port *port) +static void stm32_usart_enable_ms(struct uart_port *port) { mctrl_gpio_enable_ms(to_stm32_port(port)->gpios); } -static void stm32_disable_ms(struct uart_port *port) +static void stm32_usart_disable_ms(struct uart_port *port) { mctrl_gpio_disable_ms(to_stm32_port(port)->gpios); } /* Transmit stop */ -static void stm32_stop_tx(struct uart_port *port) +static void stm32_usart_stop_tx(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct serial_rs485 *rs485conf = &port->rs485; - stm32_tx_interrupt_disable(port); + stm32_usart_tx_interrupt_disable(port); if (rs485conf->flags & SER_RS485_ENABLED) { if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { @@ -553,7 +562,7 @@ static void stm32_stop_tx(struct uart_port *port) } /* There are probably characters waiting to be transmitted. */ -static void stm32_start_tx(struct uart_port *port) +static void stm32_usart_start_tx(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct serial_rs485 *rs485conf = &port->rs485; @@ -572,57 +581,56 @@ static void stm32_start_tx(struct uart_port *port) } } - stm32_transmit_chars(port); + stm32_usart_transmit_chars(port); } /* Throttle the remote when input buffer is about to overflow. */ -static void stm32_throttle(struct uart_port *port) +static void stm32_usart_throttle(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long flags; spin_lock_irqsave(&port->lock, flags); - stm32_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) - stm32_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); + stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); spin_unlock_irqrestore(&port->lock, flags); } /* Unthrottle the remote, the input buffer can now accept data. */ -static void stm32_unthrottle(struct uart_port *port) +static void stm32_usart_unthrottle(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long flags; spin_lock_irqsave(&port->lock, flags); - stm32_set_bits(port, ofs->cr1, stm32_port->cr1_irq); + stm32_usart_set_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) - stm32_set_bits(port, ofs->cr3, stm32_port->cr3_irq); + stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq); spin_unlock_irqrestore(&port->lock, flags); } /* Receive stop */ -static void stm32_stop_rx(struct uart_port *port) +static void stm32_usart_stop_rx(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - stm32_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) - stm32_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); - + stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); } /* Handle breaks - ignored by us */ -static void stm32_break_ctl(struct uart_port *port, int break_state) +static void stm32_usart_break_ctl(struct uart_port *port, int break_state) { } -static int stm32_startup(struct uart_port *port) +static int stm32_usart_startup(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -630,15 +638,15 @@ static int stm32_startup(struct uart_port *port) u32 val; int ret; - ret = request_threaded_irq(port->irq, stm32_interrupt, - stm32_threaded_interrupt, + ret = request_threaded_irq(port->irq, stm32_usart_interrupt, + stm32_usart_threaded_interrupt, IRQF_NO_SUSPEND, name, port); if (ret) return ret; /* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG) - stm32_set_bits(port, ofs->rqr, USART_RQR_RXFRQ); + stm32_usart_set_bits(port, ofs->rqr, USART_RQR_RXFRQ); /* Tx and RX FIFO configuration */ if (stm32_port->fifoen) { @@ -653,12 +661,12 @@ static int stm32_startup(struct uart_port *port) val = stm32_port->cr1_irq | USART_CR1_RE; if (stm32_port->fifoen) val |= USART_CR1_FIFOEN; - stm32_set_bits(port, ofs->cr1, val); + stm32_usart_set_bits(port, ofs->cr1, val); return 0; } -static void stm32_shutdown(struct uart_port *port) +static void stm32_usart_shutdown(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -667,7 +675,7 @@ static void stm32_shutdown(struct uart_port *port) int ret; /* Disable modem control interrupts */ - stm32_disable_ms(port); + stm32_usart_disable_ms(port); val = USART_CR1_TXEIE | USART_CR1_TE; val |= stm32_port->cr1_irq | USART_CR1_RE; @@ -679,15 +687,16 @@ static void stm32_shutdown(struct uart_port *port) isr, (isr & USART_SR_TC), 10, 100000); + /* Send the TC error message only when ISR_TC is not set */ if (ret) - dev_err(port->dev, "transmission complete not set\n"); + dev_err(port->dev, "Transmission is not complete\n"); - stm32_clr_bits(port, ofs->cr1, val); + stm32_usart_clr_bits(port, ofs->cr1, val); free_irq(port->irq, port); } -static unsigned int stm32_get_databits(struct ktermios *termios) +static unsigned int stm32_usart_get_databits(struct ktermios *termios) { unsigned int bits; @@ -717,8 +726,9 @@ static unsigned int stm32_get_databits(struct ktermios *termios) return bits; } -static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void stm32_usart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -742,8 +752,8 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, /* flush RX & TX FIFO */ if (ofs->rqr != UNDEF_REG) - stm32_set_bits(port, ofs->rqr, - USART_RQR_TXFRQ | USART_RQR_RXFRQ); + stm32_usart_set_bits(port, ofs->rqr, + USART_RQR_TXFRQ | USART_RQR_RXFRQ); cr1 = USART_CR1_TE | USART_CR1_RE; if (stm32_port->fifoen) @@ -756,7 +766,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, if (cflag & CSTOPB) cr2 |= USART_CR2_STOP_2B; - bits = stm32_get_databits(termios); + bits = stm32_usart_get_databits(termios); stm32_port->rdr_mask = (BIT(bits) - 1); if (cflag & PARENB) { @@ -809,9 +819,9 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, /* Handle modem control interrupts */ if (UART_ENABLE_MS(port, termios->c_cflag)) - stm32_enable_ms(port); + stm32_usart_enable_ms(port); else - stm32_disable_ms(port); + stm32_usart_disable_ms(port); usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud); @@ -824,11 +834,11 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, if (usartdiv < 16) { oversampling = 8; cr1 |= USART_CR1_OVER8; - stm32_set_bits(port, ofs->cr1, USART_CR1_OVER8); + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_OVER8); } else { oversampling = 16; cr1 &= ~USART_CR1_OVER8; - stm32_clr_bits(port, ofs->cr1, USART_CR1_OVER8); + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_OVER8); } mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT; @@ -865,9 +875,10 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, cr3 |= USART_CR3_DMAR; if (rs485conf->flags & SER_RS485_ENABLED) { - stm32_config_reg_rs485(&cr1, &cr3, - rs485conf->delay_rts_before_send, - rs485conf->delay_rts_after_send, baud); + stm32_usart_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, + baud); if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { cr3 &= ~USART_CR3_DEP; rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; @@ -885,39 +896,39 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, writel_relaxed(cr2, port->membase + ofs->cr2); writel_relaxed(cr1, port->membase + ofs->cr1); - stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); spin_unlock_irqrestore(&port->lock, flags); } -static const char *stm32_type(struct uart_port *port) +static const char *stm32_usart_type(struct uart_port *port) { return (port->type == PORT_STM32) ? DRIVER_NAME : NULL; } -static void stm32_release_port(struct uart_port *port) +static void stm32_usart_release_port(struct uart_port *port) { } -static int stm32_request_port(struct uart_port *port) +static int stm32_usart_request_port(struct uart_port *port) { return 0; } -static void stm32_config_port(struct uart_port *port, int flags) +static void stm32_usart_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_STM32; } static int -stm32_verify_port(struct uart_port *port, struct serial_struct *ser) +stm32_usart_verify_port(struct uart_port *port, struct serial_struct *ser) { /* No user changeable parameters */ return -EINVAL; } -static void stm32_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) +static void stm32_usart_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) { struct stm32_port *stm32port = container_of(port, struct stm32_port, port); @@ -931,7 +942,7 @@ static void stm32_pm(struct uart_port *port, unsigned int state, break; case UART_PM_STATE_OFF: spin_lock_irqsave(&port->lock, flags); - stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); spin_unlock_irqrestore(&port->lock, flags); pm_runtime_put_sync(port->dev); break; @@ -939,33 +950,42 @@ static void stm32_pm(struct uart_port *port, unsigned int state, } static const struct uart_ops stm32_uart_ops = { - .tx_empty = stm32_tx_empty, - .set_mctrl = stm32_set_mctrl, - .get_mctrl = stm32_get_mctrl, - .stop_tx = stm32_stop_tx, - .start_tx = stm32_start_tx, - .throttle = stm32_throttle, - .unthrottle = stm32_unthrottle, - .stop_rx = stm32_stop_rx, - .enable_ms = stm32_enable_ms, - .break_ctl = stm32_break_ctl, - .startup = stm32_startup, - .shutdown = stm32_shutdown, - .set_termios = stm32_set_termios, - .pm = stm32_pm, - .type = stm32_type, - .release_port = stm32_release_port, - .request_port = stm32_request_port, - .config_port = stm32_config_port, - .verify_port = stm32_verify_port, + .tx_empty = stm32_usart_tx_empty, + .set_mctrl = stm32_usart_set_mctrl, + .get_mctrl = stm32_usart_get_mctrl, + .stop_tx = stm32_usart_stop_tx, + .start_tx = stm32_usart_start_tx, + .throttle = stm32_usart_throttle, + .unthrottle = stm32_usart_unthrottle, + .stop_rx = stm32_usart_stop_rx, + .enable_ms = stm32_usart_enable_ms, + .break_ctl = stm32_usart_break_ctl, + .startup = stm32_usart_startup, + .shutdown = stm32_usart_shutdown, + .set_termios = stm32_usart_set_termios, + .pm = stm32_usart_pm, + .type = stm32_usart_type, + .release_port = stm32_usart_release_port, + .request_port = stm32_usart_request_port, + .config_port = stm32_usart_config_port, + .verify_port = stm32_usart_verify_port, }; -static int stm32_init_port(struct stm32_port *stm32port, - struct platform_device *pdev) +static void stm32_usart_deinit_port(struct stm32_port *stm32port) +{ + clk_disable_unprepare(stm32port->clk); +} + +static int stm32_usart_init_port(struct stm32_port *stm32port, + struct platform_device *pdev) { struct uart_port *port = &stm32port->port; struct resource *res; - int ret; + int ret, irq; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq ? : -ENODEV; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; @@ -973,15 +993,10 @@ static int stm32_init_port(struct stm32_port *stm32port, port->dev = &pdev->dev; port->fifosize = stm32port->info->cfg.fifosize; port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE); + port->irq = irq; + port->rs485_config = stm32_usart_config_rs485; - ret = platform_get_irq(pdev, 0); - if (ret <= 0) - return ret ? : -ENODEV; - port->irq = ret; - - port->rs485_config = stm32_config_rs485; - - ret = stm32_init_rs485(port, pdev); + ret = stm32_usart_init_rs485(port, pdev); if (ret) return ret; @@ -1022,7 +1037,10 @@ static int stm32_init_port(struct stm32_port *stm32port, goto err_clk; } - /* Both CTS/RTS gpios and "st,hw-flow-ctrl" should not be specified */ + /* + * Both CTS/RTS gpios and "st,hw-flow-ctrl" (deprecated) or "uart-has-rtscts" + * properties should not be specified. + */ if (stm32port->hw_flow_control) { if (mctrl_gpio_to_gpiod(stm32port->gpios, UART_GPIO_CTS) || mctrl_gpio_to_gpiod(stm32port->gpios, UART_GPIO_RTS)) { @@ -1040,7 +1058,7 @@ err_clk: return ret; } -static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) +static struct stm32_port *stm32_usart_of_get_port(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; int id; @@ -1078,8 +1096,8 @@ static const struct of_device_id stm32_match[] = { MODULE_DEVICE_TABLE(of, stm32_match); #endif -static int stm32_of_dma_rx_probe(struct stm32_port *stm32port, - struct platform_device *pdev) +static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, + struct platform_device *pdev) { struct stm32_usart_offsets *ofs = &stm32port->info->ofs; struct uart_port *port = &stm32port->port; @@ -1095,8 +1113,8 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port, return -ENODEV; } stm32port->rx_buf = dma_alloc_coherent(&pdev->dev, RX_BUF_L, - &stm32port->rx_dma_buf, - GFP_KERNEL); + &stm32port->rx_dma_buf, + GFP_KERNEL); if (!stm32port->rx_buf) { ret = -ENOMEM; goto alloc_err; @@ -1130,7 +1148,11 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port, desc->callback_param = NULL; /* Push current DMA transaction in the pending queue */ - dmaengine_submit(desc); + ret = dma_submit_error(dmaengine_submit(desc)); + if (ret) { + dmaengine_terminate_sync(stm32port->rx_ch); + goto config_err; + } /* Issue pending DMA requests */ dma_async_issue_pending(stm32port->rx_ch); @@ -1149,8 +1171,8 @@ alloc_err: return ret; } -static int stm32_of_dma_tx_probe(struct stm32_port *stm32port, - struct platform_device *pdev) +static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port, + struct platform_device *pdev) { struct stm32_usart_offsets *ofs = &stm32port->info->ofs; struct uart_port *port = &stm32port->port; @@ -1167,8 +1189,8 @@ static int stm32_of_dma_tx_probe(struct stm32_port *stm32port, return -ENODEV; } stm32port->tx_buf = dma_alloc_coherent(&pdev->dev, TX_BUF_L, - &stm32port->tx_dma_buf, - GFP_KERNEL); + &stm32port->tx_dma_buf, + GFP_KERNEL); if (!stm32port->tx_buf) { ret = -ENOMEM; goto alloc_err; @@ -1200,13 +1222,13 @@ alloc_err: return ret; } -static int stm32_serial_probe(struct platform_device *pdev) +static int stm32_usart_serial_probe(struct platform_device *pdev) { const struct of_device_id *match; struct stm32_port *stm32port; int ret; - stm32port = stm32_of_get_stm32_port(pdev); + stm32port = stm32_usart_of_get_port(pdev); if (!stm32port) return -ENODEV; @@ -1216,7 +1238,7 @@ static int stm32_serial_probe(struct platform_device *pdev) else return -EINVAL; - ret = stm32_init_port(stm32port, pdev); + ret = stm32_usart_init_port(stm32port, pdev); if (ret) return ret; @@ -1237,11 +1259,11 @@ static int stm32_serial_probe(struct platform_device *pdev) if (ret) goto err_wirq; - ret = stm32_of_dma_rx_probe(stm32port, pdev); + ret = stm32_usart_of_dma_rx_probe(stm32port, pdev); if (ret) dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n"); - ret = stm32_of_dma_tx_probe(stm32port, pdev); + ret = stm32_usart_of_dma_tx_probe(stm32port, pdev); if (ret) dev_info(&pdev->dev, "interrupt mode used for tx (no dma)\n"); @@ -1263,12 +1285,12 @@ err_nowup: device_init_wakeup(&pdev->dev, false); err_uninit: - clk_disable_unprepare(stm32port->clk); + stm32_usart_deinit_port(stm32port); return ret; } -static int stm32_serial_remove(struct platform_device *pdev) +static int stm32_usart_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct stm32_port *stm32_port = to_stm32_port(port); @@ -1277,7 +1299,7 @@ static int stm32_serial_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); - stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); if (stm32_port->rx_ch) dma_release_channel(stm32_port->rx_ch); @@ -1287,7 +1309,7 @@ static int stm32_serial_remove(struct platform_device *pdev) RX_BUF_L, stm32_port->rx_buf, stm32_port->rx_dma_buf); - stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); if (stm32_port->tx_ch) dma_release_channel(stm32_port->tx_ch); @@ -1302,7 +1324,7 @@ static int stm32_serial_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, false); } - clk_disable_unprepare(stm32_port->clk); + stm32_usart_deinit_port(stm32_port); err = uart_remove_one_port(&stm32_usart_driver, port); @@ -1312,9 +1334,8 @@ static int stm32_serial_remove(struct platform_device *pdev) return err; } - #ifdef CONFIG_SERIAL_STM32_CONSOLE -static void stm32_console_putchar(struct uart_port *port, int ch) +static void stm32_usart_console_putchar(struct uart_port *port, int ch) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -1325,7 +1346,8 @@ static void stm32_console_putchar(struct uart_port *port, int ch) writel_relaxed(ch, port->membase + ofs->tdr); } -static void stm32_console_write(struct console *co, const char *s, unsigned cnt) +static void stm32_usart_console_write(struct console *co, const char *s, + unsigned int cnt) { struct uart_port *port = &stm32_ports[co->index].port; struct stm32_port *stm32_port = to_stm32_port(port); @@ -1349,7 +1371,7 @@ static void stm32_console_write(struct console *co, const char *s, unsigned cnt) new_cr1 |= USART_CR1_TE | BIT(cfg->uart_enable_bit); writel_relaxed(new_cr1, port->membase + ofs->cr1); - uart_console_write(port, s, cnt, stm32_console_putchar); + uart_console_write(port, s, cnt, stm32_usart_console_putchar); /* Restore interrupt state */ writel_relaxed(old_cr1, port->membase + ofs->cr1); @@ -1359,7 +1381,7 @@ static void stm32_console_write(struct console *co, const char *s, unsigned cnt) local_irq_restore(flags); } -static int stm32_console_setup(struct console *co, char *options) +static int stm32_usart_console_setup(struct console *co, char *options) { struct stm32_port *stm32port; int baud = 9600; @@ -1378,7 +1400,7 @@ static int stm32_console_setup(struct console *co, char *options) * this to be called during the uart port registration when the * driver gets probed and the port should be mapped at that point. */ - if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL) + if (stm32port->port.mapbase == 0 || !stm32port->port.membase) return -ENXIO; if (options) @@ -1390,8 +1412,8 @@ static int stm32_console_setup(struct console *co, char *options) static struct console stm32_console = { .name = STM32_SERIAL_NAME, .device = uart_console_device, - .write = stm32_console_write, - .setup = stm32_console_setup, + .write = stm32_usart_console_write, + .setup = stm32_usart_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &stm32_usart_driver, @@ -1412,8 +1434,8 @@ static struct uart_driver stm32_usart_driver = { .cons = STM32_SERIAL_CONSOLE, }; -static void __maybe_unused stm32_serial_enable_wakeup(struct uart_port *port, - bool enable) +static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, + bool enable) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -1424,29 +1446,29 @@ static void __maybe_unused stm32_serial_enable_wakeup(struct uart_port *port, return; if (enable) { - stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - stm32_set_bits(port, ofs->cr1, USART_CR1_UESM); + stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM); val = readl_relaxed(port->membase + ofs->cr3); val &= ~USART_CR3_WUS_MASK; /* Enable Wake up interrupt from low power on start bit */ val |= USART_CR3_WUS_START_BIT | USART_CR3_WUFIE; writel_relaxed(val, port->membase + ofs->cr3); - stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); } else { - stm32_clr_bits(port, ofs->cr1, USART_CR1_UESM); + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM); } } -static int __maybe_unused stm32_serial_suspend(struct device *dev) +static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); uart_suspend_port(&stm32_usart_driver, port); if (device_may_wakeup(dev)) - stm32_serial_enable_wakeup(port, true); + stm32_usart_serial_en_wakeup(port, true); else - stm32_serial_enable_wakeup(port, false); + stm32_usart_serial_en_wakeup(port, false); /* * When "no_console_suspend" is enabled, keep the pinctrl default state @@ -1464,19 +1486,19 @@ static int __maybe_unused stm32_serial_suspend(struct device *dev) return 0; } -static int __maybe_unused stm32_serial_resume(struct device *dev) +static int __maybe_unused stm32_usart_serial_resume(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); pinctrl_pm_select_default_state(dev); if (device_may_wakeup(dev)) - stm32_serial_enable_wakeup(port, false); + stm32_usart_serial_en_wakeup(port, false); return uart_resume_port(&stm32_usart_driver, port); } -static int __maybe_unused stm32_serial_runtime_suspend(struct device *dev) +static int __maybe_unused stm32_usart_runtime_suspend(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); struct stm32_port *stm32port = container_of(port, @@ -1487,7 +1509,7 @@ static int __maybe_unused stm32_serial_runtime_suspend(struct device *dev) return 0; } -static int __maybe_unused stm32_serial_runtime_resume(struct device *dev) +static int __maybe_unused stm32_usart_runtime_resume(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); struct stm32_port *stm32port = container_of(port, @@ -1497,14 +1519,15 @@ static int __maybe_unused stm32_serial_runtime_resume(struct device *dev) } static const struct dev_pm_ops stm32_serial_pm_ops = { - SET_RUNTIME_PM_OPS(stm32_serial_runtime_suspend, - stm32_serial_runtime_resume, NULL) - SET_SYSTEM_SLEEP_PM_OPS(stm32_serial_suspend, stm32_serial_resume) + SET_RUNTIME_PM_OPS(stm32_usart_runtime_suspend, + stm32_usart_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(stm32_usart_serial_suspend, + stm32_usart_serial_resume) }; static struct platform_driver stm32_serial_driver = { - .probe = stm32_serial_probe, - .remove = stm32_serial_remove, + .probe = stm32_usart_serial_probe, + .remove = stm32_usart_serial_remove, .driver = { .name = DRIVER_NAME, .pm = &stm32_serial_pm_ops, @@ -1512,7 +1535,7 @@ static struct platform_driver stm32_serial_driver = { }, }; -static int __init usart_init(void) +static int __init stm32_usart_init(void) { static char banner[] __initdata = "STM32 USART driver initialized"; int ret; @@ -1530,14 +1553,14 @@ static int __init usart_init(void) return ret; } -static void __exit usart_exit(void) +static void __exit stm32_usart_exit(void) { platform_driver_unregister(&stm32_serial_driver); uart_unregister_driver(&stm32_usart_driver); } -module_init(usart_init); -module_exit(usart_exit); +module_init(stm32_usart_init); +module_exit(stm32_usart_exit); MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver"); diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index c0b384e3ed4d..644173786bf0 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -672,7 +672,6 @@ static int open(struct tty_struct *tty, struct file *filp) DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); mutex_lock(&info->port.mutex); - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 082da38762fc..74733ec8f565 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -142,7 +142,7 @@ LIST_HEAD(tty_drivers); /* linked list of tty drivers */ /* Mutex to protect creating and releasing a tty */ DEFINE_MUTEX(tty_mutex); -static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *); +static ssize_t tty_read(struct kiocb *, struct iov_iter *); static ssize_t tty_write(struct kiocb *, struct iov_iter *); static __poll_t tty_poll(struct file *, poll_table *); static int tty_open(struct inode *, struct file *); @@ -429,8 +429,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) EXPORT_SYMBOL_GPL(tty_find_polling_driver); #endif -static ssize_t hung_up_tty_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) +static ssize_t hung_up_tty_read(struct kiocb *iocb, struct iov_iter *to) { return 0; } @@ -473,8 +472,9 @@ static void tty_show_fdinfo(struct seq_file *m, struct file *file) static const struct file_operations tty_fops = { .llseek = no_llseek, - .read = tty_read, + .read_iter = tty_read, .write_iter = tty_write, + .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .poll = tty_poll, .unlocked_ioctl = tty_ioctl, @@ -487,8 +487,9 @@ static const struct file_operations tty_fops = { static const struct file_operations console_fops = { .llseek = no_llseek, - .read = tty_read, + .read_iter = tty_read, .write_iter = redirected_tty_write, + .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .poll = tty_poll, .unlocked_ioctl = tty_ioctl, @@ -500,7 +501,7 @@ static const struct file_operations console_fops = { static const struct file_operations hung_up_tty_fops = { .llseek = no_llseek, - .read = hung_up_tty_read, + .read_iter = hung_up_tty_read, .write_iter = hung_up_tty_write, .poll = hung_up_tty_poll, .unlocked_ioctl = hung_up_tty_ioctl, @@ -538,6 +539,29 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); +/** + * tty_release_redirect - Release a redirect on a pty if present + * @tty: tty device + * + * This is available to the pty code so if the master closes, if the + * slave is a redirect it can release the redirect. It returns the + * filp for the redirect, which must be fput when the operations on + * the tty are completed. + */ +struct file *tty_release_redirect(struct tty_struct *tty) +{ + struct file *f = NULL; + + spin_lock(&redirect_lock); + if (redirect && file_tty(redirect) == tty) { + f = redirect; + redirect = NULL; + } + spin_unlock(&redirect_lock); + + return f; +} + /** * __tty_hangup - actual handler for hangup events * @tty: tty device @@ -564,7 +588,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); static void __tty_hangup(struct tty_struct *tty, int exit_session) { struct file *cons_filp = NULL; - struct file *filp, *f = NULL; + struct file *filp, *f; struct tty_file_private *priv; int closecount = 0, n; int refs; @@ -572,13 +596,7 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) if (!tty) return; - - spin_lock(&redirect_lock); - if (redirect && file_tty(redirect) == tty) { - f = redirect; - redirect = NULL; - } - spin_unlock(&redirect_lock); + f = tty_release_redirect(tty); tty_lock(tty); @@ -829,6 +847,72 @@ static void tty_update_time(struct timespec64 *time) time->tv_sec = sec; } +/* + * Iterate on the ldisc ->read() function until we've gotten all + * the data the ldisc has for us. + * + * The "cookie" is something that the ldisc read function can fill + * in to let us know that there is more data to be had. + * + * We promise to continue to call the ldisc until it stops returning + * data or clears the cookie. The cookie may be something that the + * ldisc maintains state for and needs to free. + */ +static int iterate_tty_read(struct tty_ldisc *ld, struct tty_struct *tty, + struct file *file, struct iov_iter *to) +{ + int retval = 0; + void *cookie = NULL; + unsigned long offset = 0; + char kernel_buf[64]; + size_t count = iov_iter_count(to); + + do { + int size, copied; + + size = count > sizeof(kernel_buf) ? sizeof(kernel_buf) : count; + size = ld->ops->read(tty, file, kernel_buf, size, &cookie, offset); + if (!size) + break; + + if (size < 0) { + /* Did we have an earlier error (ie -EFAULT)? */ + if (retval) + break; + retval = size; + + /* + * -EOVERFLOW means we didn't have enough space + * for a whole packet, and we shouldn't return + * a partial result. + */ + if (retval == -EOVERFLOW) + offset = 0; + break; + } + + copied = copy_to_iter(kernel_buf, size, to); + offset += copied; + count -= copied; + + /* + * If the user copy failed, we still need to do another ->read() + * call if we had a cookie to let the ldisc clear up. + * + * But make sure size is zeroed. + */ + if (unlikely(copied != size)) { + count = 0; + retval = -EFAULT; + } + } while (cookie); + + /* We always clear tty buffer in case they contained passwords */ + memzero_explicit(kernel_buf, sizeof(kernel_buf)); + return offset ? offset : retval; +} + + /** * tty_read - read method for tty device files * @file: pointer to tty file @@ -844,10 +928,10 @@ static void tty_update_time(struct timespec64 *time) * read calls may be outstanding in parallel. */ -static ssize_t tty_read(struct file *file, char __user *buf, size_t count, - loff_t *ppos) +static ssize_t tty_read(struct kiocb *iocb, struct iov_iter *to) { int i; + struct file *file = iocb->ki_filp; struct inode *inode = file_inode(file); struct tty_struct *tty = file_tty(file); struct tty_ldisc *ld; @@ -861,11 +945,10 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, situation */ ld = tty_ldisc_ref_wait(tty); if (!ld) - return hung_up_tty_read(file, buf, count, ppos); + return hung_up_tty_read(iocb, to); + i = -EIO; if (ld->ops->read) - i = ld->ops->read(tty, file, buf, count); - else - i = -EIO; + i = iterate_tty_read(ld, tty, file, to); tty_ldisc_deref(ld); if (i > 0) @@ -1889,22 +1972,7 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, return driver; } -/** - * tty_kopen - open a tty device for kernel - * @device: dev_t of device to open - * - * Opens tty exclusively for kernel. Performs the driver lookup, - * makes sure it's not already opened and performs the first-time - * tty initialization. - * - * Returns the locked initialized &tty_struct - * - * Claims the global tty_mutex to serialize: - * - concurrent first-time tty initialization - * - concurrent tty driver removal w/ lookup - * - concurrent tty removal from driver table - */ -struct tty_struct *tty_kopen(dev_t device) +static struct tty_struct *tty_kopen(dev_t device, int shared) { struct tty_struct *tty; struct tty_driver *driver; @@ -1919,7 +1987,7 @@ struct tty_struct *tty_kopen(dev_t device) /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, NULL, index); - if (IS_ERR(tty)) + if (IS_ERR(tty) || shared) goto out; if (tty) { @@ -1937,7 +2005,42 @@ out: tty_driver_kref_put(driver); return tty; } -EXPORT_SYMBOL_GPL(tty_kopen); + +/** + * tty_kopen_exclusive - open a tty device for kernel + * @device: dev_t of device to open + * + * Opens tty exclusively for kernel. Performs the driver lookup, + * makes sure it's not already opened and performs the first-time + * tty initialization. + * + * Returns the locked initialized &tty_struct + * + * Claims the global tty_mutex to serialize: + * - concurrent first-time tty initialization + * - concurrent tty driver removal w/ lookup + * - concurrent tty removal from driver table + */ +struct tty_struct *tty_kopen_exclusive(dev_t device) +{ + return tty_kopen(device, 0); +} +EXPORT_SYMBOL_GPL(tty_kopen_exclusive); + +/** + * tty_kopen_shared - open a tty device for shared in-kernel use + * @device: dev_t of device to open + * + * Opens an already existing tty for in-kernel use. Compared to + * tty_kopen_exclusive() above it doesn't ensure to be the only user. + * + * Locking is identical to tty_kopen() above. + */ +struct tty_struct *tty_kopen_shared(dev_t device) +{ + return tty_kopen(device, 1); +} +EXPORT_SYMBOL_GPL(tty_kopen_shared); /** * tty_open_by_driver - open a tty device @@ -2488,15 +2591,36 @@ static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd, return tty->ops->tiocmset(tty, set, clear); } +/** + * tty_get_icount - get tty statistics + * @tty: tty device + * @icount: output parameter + * + * Gets a copy of the tty's icount statistics. + * + * Locking: none (up to the driver) + */ +int tty_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + memset(icount, 0, sizeof(*icount)); + + if (tty->ops->get_icount) + return tty->ops->get_icount(tty, icount); + else + return -EINVAL; +} +EXPORT_SYMBOL_GPL(tty_get_icount); + static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) { - int retval = -EINVAL; struct serial_icounter_struct icount; - memset(&icount, 0, sizeof(icount)); - if (tty->ops->get_icount) - retval = tty->ops->get_icount(tty, &icount); + int retval; + + retval = tty_get_icount(tty, &icount); if (retval != 0) return retval; + if (copy_to_user(arg, &icount, sizeof(icount))) return -EFAULT; return 0; @@ -2887,7 +3011,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd, static int this_tty(const void *t, struct file *file, unsigned fd) { - if (likely(file->f_op->read != tty_read)) + if (likely(file->f_op->read_iter != tty_read)) return 0; return file_tty(file) != t ? 0 : fd + 1; } diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c index 9ffd42e333b8..e2d6205f83ce 100644 --- a/drivers/tty/vcc.c +++ b/drivers/tty/vcc.c @@ -681,9 +681,6 @@ static int vcc_remove(struct vio_dev *vdev) { struct vcc_port *port = dev_get_drvdata(&vdev->dev); - if (!port) - return -ENODEV; - del_timer_sync(&port->rx_timer); del_timer_sync(&port->tx_timer); @@ -695,12 +692,9 @@ static int vcc_remove(struct vio_dev *vdev) tty_vhangup(port->tty); /* Get exclusive reference to VCC, ensures that there are no other - * clients to this port + * clients to this port. This cannot fail. */ - port = vcc_get(port->index, true); - - if (WARN_ON(!port)) - return -ENODEV; + vcc_get(port->index, true); tty_unregister_device(vcc_tty_driver, port->index); diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index f7d015c67963..d815ac98b39e 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -495,7 +495,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos) p2[unicode & 0x3f] = fontpos; - p->sum += (fontpos << 20) + unicode; + p->sum += (fontpos << 20U) + unicode; return 0; } diff --git a/drivers/tty/vt/defkeymap.c_shipped b/drivers/tty/vt/defkeymap.c_shipped index c7095fb7d2d1..094d95bf0005 100644 --- a/drivers/tty/vt/defkeymap.c_shipped +++ b/drivers/tty/vt/defkeymap.c_shipped @@ -6,7 +6,7 @@ #include #include -u_short plain_map[NR_KEYS] = { +unsigned short plain_map[NR_KEYS] = { 0xf200, 0xf01b, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035, 0xf036, 0xf037, 0xf038, 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf07f, 0xf009, 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69, @@ -25,7 +25,7 @@ u_short plain_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short shift_map[NR_KEYS] = { +static unsigned short shift_map[NR_KEYS] = { 0xf200, 0xf01b, 0xf021, 0xf040, 0xf023, 0xf024, 0xf025, 0xf05e, 0xf026, 0xf02a, 0xf028, 0xf029, 0xf05f, 0xf02b, 0xf07f, 0xf009, 0xfb51, 0xfb57, 0xfb45, 0xfb52, 0xfb54, 0xfb59, 0xfb55, 0xfb49, @@ -44,7 +44,7 @@ u_short shift_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short altgr_map[NR_KEYS] = { +static unsigned short altgr_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf040, 0xf200, 0xf024, 0xf200, 0xf200, 0xf07b, 0xf05b, 0xf05d, 0xf07d, 0xf05c, 0xf200, 0xf200, 0xf200, 0xfb71, 0xfb77, 0xf918, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69, @@ -63,7 +63,7 @@ u_short altgr_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short ctrl_map[NR_KEYS] = { +static unsigned short ctrl_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf000, 0xf01b, 0xf01c, 0xf01d, 0xf01e, 0xf01f, 0xf07f, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf008, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009, @@ -82,7 +82,7 @@ u_short ctrl_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short shift_ctrl_map[NR_KEYS] = { +static unsigned short shift_ctrl_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf000, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009, @@ -101,7 +101,7 @@ u_short shift_ctrl_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short alt_map[NR_KEYS] = { +static unsigned short alt_map[NR_KEYS] = { 0xf200, 0xf81b, 0xf831, 0xf832, 0xf833, 0xf834, 0xf835, 0xf836, 0xf837, 0xf838, 0xf839, 0xf830, 0xf82d, 0xf83d, 0xf87f, 0xf809, 0xf871, 0xf877, 0xf865, 0xf872, 0xf874, 0xf879, 0xf875, 0xf869, @@ -120,7 +120,7 @@ u_short alt_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, }; -u_short ctrl_alt_map[NR_KEYS] = { +static unsigned short ctrl_alt_map[NR_KEYS] = { 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf811, 0xf817, 0xf805, 0xf812, 0xf814, 0xf819, 0xf815, 0xf809, @@ -224,40 +224,40 @@ char *func_table[MAX_NR_FUNC] = { }; struct kbdiacruc accent_table[MAX_DIACR] = { - {'`', 'A', 0300}, {'`', 'a', 0340}, - {'\'', 'A', 0301}, {'\'', 'a', 0341}, - {'^', 'A', 0302}, {'^', 'a', 0342}, - {'~', 'A', 0303}, {'~', 'a', 0343}, - {'"', 'A', 0304}, {'"', 'a', 0344}, - {'O', 'A', 0305}, {'o', 'a', 0345}, - {'0', 'A', 0305}, {'0', 'a', 0345}, - {'A', 'A', 0305}, {'a', 'a', 0345}, - {'A', 'E', 0306}, {'a', 'e', 0346}, - {',', 'C', 0307}, {',', 'c', 0347}, - {'`', 'E', 0310}, {'`', 'e', 0350}, - {'\'', 'E', 0311}, {'\'', 'e', 0351}, - {'^', 'E', 0312}, {'^', 'e', 0352}, - {'"', 'E', 0313}, {'"', 'e', 0353}, - {'`', 'I', 0314}, {'`', 'i', 0354}, - {'\'', 'I', 0315}, {'\'', 'i', 0355}, - {'^', 'I', 0316}, {'^', 'i', 0356}, - {'"', 'I', 0317}, {'"', 'i', 0357}, - {'-', 'D', 0320}, {'-', 'd', 0360}, - {'~', 'N', 0321}, {'~', 'n', 0361}, - {'`', 'O', 0322}, {'`', 'o', 0362}, - {'\'', 'O', 0323}, {'\'', 'o', 0363}, - {'^', 'O', 0324}, {'^', 'o', 0364}, - {'~', 'O', 0325}, {'~', 'o', 0365}, - {'"', 'O', 0326}, {'"', 'o', 0366}, - {'/', 'O', 0330}, {'/', 'o', 0370}, - {'`', 'U', 0331}, {'`', 'u', 0371}, - {'\'', 'U', 0332}, {'\'', 'u', 0372}, - {'^', 'U', 0333}, {'^', 'u', 0373}, - {'"', 'U', 0334}, {'"', 'u', 0374}, - {'\'', 'Y', 0335}, {'\'', 'y', 0375}, - {'T', 'H', 0336}, {'t', 'h', 0376}, - {'s', 's', 0337}, {'"', 'y', 0377}, - {'s', 'z', 0337}, {'i', 'j', 0377}, + {'`', 'A', 0x00c0}, {'`', 'a', 0x00e0}, + {'\'', 'A', 0x00c1}, {'\'', 'a', 0x00e1}, + {'^', 'A', 0x00c2}, {'^', 'a', 0x00e2}, + {'~', 'A', 0x00c3}, {'~', 'a', 0x00e3}, + {'"', 'A', 0x00c4}, {'"', 'a', 0x00e4}, + {'O', 'A', 0x00c5}, {'o', 'a', 0x00e5}, + {'0', 'A', 0x00c5}, {'0', 'a', 0x00e5}, + {'A', 'A', 0x00c5}, {'a', 'a', 0x00e5}, + {'A', 'E', 0x00c6}, {'a', 'e', 0x00e6}, + {',', 'C', 0x00c7}, {',', 'c', 0x00e7}, + {'`', 'E', 0x00c8}, {'`', 'e', 0x00e8}, + {'\'', 'E', 0x00c9}, {'\'', 'e', 0x00e9}, + {'^', 'E', 0x00ca}, {'^', 'e', 0x00ea}, + {'"', 'E', 0x00cb}, {'"', 'e', 0x00eb}, + {'`', 'I', 0x00cc}, {'`', 'i', 0x00ec}, + {'\'', 'I', 0x00cd}, {'\'', 'i', 0x00ed}, + {'^', 'I', 0x00ce}, {'^', 'i', 0x00ee}, + {'"', 'I', 0x00cf}, {'"', 'i', 0x00ef}, + {'-', 'D', 0x00d0}, {'-', 'd', 0x00f0}, + {'~', 'N', 0x00d1}, {'~', 'n', 0x00f1}, + {'`', 'O', 0x00d2}, {'`', 'o', 0x00f2}, + {'\'', 'O', 0x00d3}, {'\'', 'o', 0x00f3}, + {'^', 'O', 0x00d4}, {'^', 'o', 0x00f4}, + {'~', 'O', 0x00d5}, {'~', 'o', 0x00f5}, + {'"', 'O', 0x00d6}, {'"', 'o', 0x00f6}, + {'/', 'O', 0x00d8}, {'/', 'o', 0x00f8}, + {'`', 'U', 0x00d9}, {'`', 'u', 0x00f9}, + {'\'', 'U', 0x00da}, {'\'', 'u', 0x00fa}, + {'^', 'U', 0x00db}, {'^', 'u', 0x00fb}, + {'"', 'U', 0x00dc}, {'"', 'u', 0x00fc}, + {'\'', 'Y', 0x00dd}, {'\'', 'y', 0x00fd}, + {'T', 'H', 0x00de}, {'t', 'h', 0x00fe}, + {'s', 's', 0x00df}, {'"', 'y', 0x00ff}, + {'s', 'z', 0x00df}, {'i', 'j', 0x00ff}, }; unsigned int accent_table_size = 68; diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 52922d21a49f..77638629c562 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -131,6 +131,9 @@ static const unsigned char max_vals[] = { static const int NR_TYPES = ARRAY_SIZE(max_vals); +static void kbd_bh(struct tasklet_struct *unused); +static DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh); + static struct input_handler kbd_handler; static DEFINE_SPINLOCK(kbd_event_lock); static DEFINE_SPINLOCK(led_lock); @@ -372,6 +375,12 @@ static void to_utf8(struct vc_data *vc, uint c) } } +/* FIXME: review locking for vt.c callers */ +static void set_leds(void) +{ + tasklet_schedule(&keyboard_tasklet); +} + /* * Called after returning from RAW mode or when changing consoles - recompute * shift_down[] and shift_state from key_down[] maybe called when keymap is @@ -401,9 +410,12 @@ static void do_compute_shiftstate(void) } /* We still have to export this method to vt.c */ -void compute_shiftstate(void) +void vt_set_leds_compute_shiftstate(void) { unsigned long flags; + + set_leds(); + spin_lock_irqsave(&kbd_event_lock, flags); do_compute_shiftstate(); spin_unlock_irqrestore(&kbd_event_lock, flags); @@ -1233,7 +1245,7 @@ void vt_kbd_con_stop(int console) * handle the scenario when keyboard handler is not registered yet * but we already getting updates from the VT to update led state. */ -static void kbd_bh(unsigned long dummy) +static void kbd_bh(struct tasklet_struct *unused) { unsigned int leds; unsigned long flags; @@ -1249,8 +1261,6 @@ static void kbd_bh(unsigned long dummy) } } -DECLARE_TASKLET_DISABLED_OLD(keyboard_tasklet, kbd_bh); - #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index d04a162939a4..284b07224c55 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1036,8 +1036,7 @@ void redraw_screen(struct vc_data *vc, int is_switch) } set_cursor(vc); if (is_switch) { - set_leds(); - compute_shiftstate(); + vt_set_leds_compute_shiftstate(); notify_update(vc); } } @@ -4584,16 +4583,8 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) if (op->data && font.charcount > op->charcount) rc = -ENOSPC; - if (!(op->flags & KD_FONT_FLAG_OLD)) { - if (font.width > op->width || font.height > op->height) - rc = -ENOSPC; - } else { - if (font.width != 8) - rc = -EIO; - else if ((op->height && font.height > op->height) || - font.height > 32) - rc = -ENOSPC; - } + if (font.width > op->width || font.height > op->height) + rc = -ENOSPC; if (rc) goto out; @@ -4621,7 +4612,7 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) return -EINVAL; if (op->charcount > 512) return -EINVAL; - if (op->width <= 0 || op->width > 32 || op->height > 32) + if (op->width <= 0 || op->width > 32 || !op->height || op->height > 32) return -EINVAL; size = (op->width+7)/8 * 32 * op->charcount; if (size > max_font_size) @@ -4631,31 +4622,6 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) if (IS_ERR(font.data)) return PTR_ERR(font.data); - if (!op->height) { /* Need to guess font height [compat] */ - int h, i; - u8 *charmap = font.data; - - /* - * If from KDFONTOP ioctl, don't allow things which can be done - * in userland,so that we can get rid of this soon - */ - if (!(op->flags & KD_FONT_FLAG_OLD)) { - kfree(font.data); - return -EINVAL; - } - - for (h = 32; h > 0; h--) - for (i = 0; i < op->charcount; i++) - if (charmap[32*i+h-1]) - goto nonzero; - - kfree(font.data); - return -EINVAL; - - nonzero: - op->height = h; - } - font.charcount = op->charcount; font.width = op->width; font.height = op->height; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 3813c40f1b48..89aeaf3c1bca 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -484,70 +484,6 @@ static int vt_k_ioctl(struct tty_struct *tty, unsigned int cmd, return 0; } -static inline int do_fontx_ioctl(struct vc_data *vc, int cmd, - struct consolefontdesc __user *user_cfd, - struct console_font_op *op) -{ - struct consolefontdesc cfdarg; - int i; - - if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc))) - return -EFAULT; - - switch (cmd) { - case PIO_FONTX: - op->op = KD_FONT_OP_SET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = cfdarg.chardata; - return con_font_op(vc, op); - - case GIO_FONTX: - op->op = KD_FONT_OP_GET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = cfdarg.chardata; - i = con_font_op(vc, op); - if (i) - return i; - cfdarg.charheight = op->height; - cfdarg.charcount = op->charcount; - if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc))) - return -EFAULT; - return 0; - } - return -EINVAL; -} - -static int vt_io_fontreset(struct vc_data *vc, struct console_font_op *op) -{ - int ret; - - if (__is_defined(BROKEN_GRAPHICS_PROGRAMS)) { - /* - * With BROKEN_GRAPHICS_PROGRAMS defined, the default font is - * not saved. - */ - return -ENOSYS; - } - - op->op = KD_FONT_OP_SET_DEFAULT; - op->data = NULL; - ret = con_font_op(vc, op); - if (ret) - return ret; - - console_lock(); - con_set_default_unimap(vc); - console_unlock(); - - return 0; -} - static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, bool perm, struct vc_data *vc) { @@ -572,29 +508,7 @@ static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, bool perm) { - struct console_font_op op; /* used in multiple places here */ - switch (cmd) { - case PIO_FONT: - if (!perm) - return -EPERM; - op.op = KD_FONT_OP_SET; - op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */ - op.width = 8; - op.height = 0; - op.charcount = 256; - op.data = up; - return con_font_op(vc, &op); - - case GIO_FONT: - op.op = KD_FONT_OP_GET; - op.flags = KD_FONT_FLAG_OLD; - op.width = 8; - op.height = 32; - op.charcount = 256; - op.data = up; - return con_font_op(vc, &op); - case PIO_CMAP: if (!perm) return -EPERM; @@ -603,20 +517,6 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, case GIO_CMAP: return con_get_cmap(up); - case PIO_FONTX: - if (!perm) - return -EPERM; - - fallthrough; - case GIO_FONTX: - return do_fontx_ioctl(vc, cmd, up, &op); - - case PIO_FONTRESET: - if (!perm) - return -EPERM; - - return vt_io_fontreset(vc, &op); - case PIO_SCRNMAP: if (!perm) return -EPERM; @@ -1030,8 +930,7 @@ void reset_vc(struct vc_data *vc) put_pid(vc->vt_pid); vc->vt_pid = NULL; vc->vt_newvt = -1; - if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */ - reset_palette(vc); + reset_palette(vc); } void vc_SAK(struct work_struct *work) @@ -1059,54 +958,6 @@ void vc_SAK(struct work_struct *work) #ifdef CONFIG_COMPAT -struct compat_consolefontdesc { - unsigned short charcount; /* characters in font (256 or 512) */ - unsigned short charheight; /* scan lines per character (1-32) */ - compat_caddr_t chardata; /* font data in expanded form */ -}; - -static inline int -compat_fontx_ioctl(struct vc_data *vc, int cmd, - struct compat_consolefontdesc __user *user_cfd, - int perm, struct console_font_op *op) -{ - struct compat_consolefontdesc cfdarg; - int i; - - if (copy_from_user(&cfdarg, user_cfd, sizeof(struct compat_consolefontdesc))) - return -EFAULT; - - switch (cmd) { - case PIO_FONTX: - if (!perm) - return -EPERM; - op->op = KD_FONT_OP_SET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = compat_ptr(cfdarg.chardata); - return con_font_op(vc, op); - - case GIO_FONTX: - op->op = KD_FONT_OP_GET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = compat_ptr(cfdarg.chardata); - i = con_font_op(vc, op); - if (i) - return i; - cfdarg.charheight = op->height; - cfdarg.charcount = op->charcount; - if (copy_to_user(user_cfd, &cfdarg, sizeof(struct compat_consolefontdesc))) - return -EFAULT; - return 0; - } - return -EINVAL; -} - struct compat_console_font_op { compat_uint_t op; /* operation code KD_FONT_OP_* */ compat_uint_t flags; /* KD_FONT_FLAG_* */ @@ -1183,9 +1034,6 @@ long vt_compat_ioctl(struct tty_struct *tty, /* * these need special handlers for incompatible data structures */ - case PIO_FONTX: - case GIO_FONTX: - return compat_fontx_ioctl(vc, cmd, up, perm, &op); case KDFONTOP: return compat_kdfontop_ioctl(up, perm, &op, vc); diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 17876f0179b5..962c12be9774 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -90,7 +90,6 @@ static unsigned int vga_video_num_lines; /* Number of text lines */ static bool vga_can_do_color; /* Do we support colors? */ static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */ static unsigned char vga_video_type __read_mostly; /* Card type */ -static bool vga_font_is_default = true; static int vga_vesa_blanked; static bool vga_palette_blanked; static bool vga_is_gfx; @@ -878,7 +877,6 @@ static int vgacon_do_font_op(struct vgastate *state, char *arg, int set, beg = 0x0a; } -#ifdef BROKEN_GRAPHICS_PROGRAMS /* * All fonts are loaded in slot 0 (0:1 for 512 ch) */ @@ -886,24 +884,7 @@ static int vgacon_do_font_op(struct vgastate *state, char *arg, int set, if (!arg) return -EINVAL; /* Return to default font not supported */ - vga_font_is_default = false; font_select = ch512 ? 0x04 : 0x00; -#else - /* - * The default font is kept in slot 0 and is never touched. - * A custom font is loaded in slot 2 (256 ch) or 2:3 (512 ch) - */ - - if (set) { - vga_font_is_default = !arg; - if (!arg) - ch512 = false; /* Default font is always 256 */ - font_select = arg ? (ch512 ? 0x0e : 0x0a) : 0x00; - } - - if (!vga_font_is_default) - charmap += 4 * cmapsz; -#endif raw_spin_lock_irq(&vga_lock); /* First, the Sequencer */ diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index 82f29aa35062..c40811d79769 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -6,8 +6,6 @@ #include #include -extern struct tasklet_struct keyboard_tasklet; - extern char *func_table[MAX_NR_FUNC]; /* @@ -71,12 +69,6 @@ extern void (*kbd_ledfunc)(unsigned int led); extern int set_console(int nr); extern void schedule_console_callback(void); -/* FIXME: review locking for vt.c callers */ -static inline void set_leds(void) -{ - tasklet_schedule(&keyboard_tasklet); -} - static inline int vc_kbd_mode(struct kbd_struct * kbd, int flag) { return ((kbd->modeflags >> flag) & 1); @@ -135,7 +127,7 @@ static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag) struct console; -void compute_shiftstate(void); +void vt_set_leds_compute_shiftstate(void); /* defkeymap.c */ diff --git a/include/linux/kd.h b/include/linux/kd.h deleted file mode 100644 index b130a18f860f..000000000000 --- a/include/linux/kd.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_KD_H -#define _LINUX_KD_H - -#include - -#define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */ -#endif /* _LINUX_KD_H */ diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h deleted file mode 100644 index ccbb8f11db75..000000000000 --- a/include/linux/platform_data/efm32-uart.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * - * - */ -#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ -#define __LINUX_PLATFORM_DATA_EFM32_UART_H__ - -#include - -/** - * struct efm32_uart_pdata - * @location: pinmux location for the I/O pins (to be written to the ROUTE - * register) - */ -struct efm32_uart_pdata { - u8 location; -}; -#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */ diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h deleted file mode 100644 index 6d19b09139d0..000000000000 --- a/include/linux/spi/ifx_modem.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef LINUX_IFX_MODEM_H -#define LINUX_IFX_MODEM_H - -struct ifx_modem_platform_data { - unsigned short tx_pwr; /* modem power threshold */ - unsigned char modem_type; /* Modem type */ - unsigned long max_hz; /* max SPI frequency */ - unsigned short use_dma:1; /* spi protocol driver supplies - dma-able addrs */ -}; -#define IFX_MODEM_6160 1 -#define IFX_MODEM_6260 2 - -#endif diff --git a/include/linux/tty.h b/include/linux/tty.h index 37803f3e6d49..95fc2f100f12 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -240,8 +240,7 @@ struct tty_port { wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* User TTY flags ASYNC_ */ unsigned long iflags; /* Internal flags TTY_PORT_ */ - unsigned char console:1, /* port is a console */ - low_latency:1; /* optional: tune for latency */ + unsigned char console:1; /* port is a console */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ @@ -416,12 +415,14 @@ extern struct tty_struct *get_current_tty(void); /* tty_io.c */ extern int __init tty_init(void); extern const char *tty_name(const struct tty_struct *tty); -extern struct tty_struct *tty_kopen(dev_t device); +extern struct tty_struct *tty_kopen_exclusive(dev_t device); +extern struct tty_struct *tty_kopen_shared(dev_t device); extern void tty_kclose(struct tty_struct *tty); extern int tty_dev_name_to_number(const char *name, dev_t *number); extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout); extern void tty_ldisc_unlock(struct tty_struct *tty); extern ssize_t redirected_tty_write(struct kiocb *, struct iov_iter *); +extern struct file *tty_release_redirect(struct tty_struct *tty); #else static inline void tty_kref_put(struct tty_struct *tty) { } @@ -442,7 +443,7 @@ static inline int __init tty_init(void) { return 0; } static inline const char *tty_name(const struct tty_struct *tty) { return "(none)"; } -static inline struct tty_struct *tty_kopen(dev_t device) +static inline struct tty_struct *tty_kopen_exclusive(dev_t device) { return ERR_PTR(-ENODEV); } static inline void tty_kclose(struct tty_struct *tty) { } @@ -500,6 +501,8 @@ extern void tty_unthrottle(struct tty_struct *tty); extern int tty_throttle_safe(struct tty_struct *tty); extern int tty_unthrottle_safe(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); +extern int tty_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); extern int is_current_pgrp_orphaned(void); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index b1e6043e9917..572a07976116 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -185,7 +185,8 @@ struct tty_ldisc_ops { void (*close)(struct tty_struct *); void (*flush_buffer)(struct tty_struct *tty); ssize_t (*read)(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr); + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset); ssize_t (*write)(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr); int (*ioctl)(struct tty_struct *tty, struct file *file, diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 349e39c3ab60..94e7a315479c 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -16,18 +16,6 @@ #include #include -/* - * Presently, a lot of graphics programs do not restore the contents of - * the higher font pages. Defining this flag will avoid use of them, but - * will lose support for PIO_FONTRESET. Note that many font operations are - * not likely to work with these programs anyway; they need to be - * fixed. The linux/Documentation directory includes a code snippet - * to save and restore the text font. - */ -#ifdef CONFIG_VGA_CONSOLE -#define BROKEN_GRAPHICS_PROGRAMS 1 -#endif - void kd_mksound(unsigned int hz, unsigned int ticks); int kbd_rate(struct kbd_repeat *rep); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 62c22045fe65..c4042dcfdc0c 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -208,9 +208,6 @@ /* Atheros AR933X SoC */ #define PORT_AR933X 99 -/* Energy Micro efm32 SoC */ -#define PORT_EFMUART 100 - /* ARC (Synopsys) on-chip UART */ #define PORT_ARC 101 diff --git a/include/uapi/linux/termios.h b/include/uapi/linux/termios.h index 33961d4e4de0..e6da9d4433d1 100644 --- a/include/uapi/linux/termios.h +++ b/include/uapi/linux/termios.h @@ -5,19 +5,4 @@ #include #include -#define NFF 5 - -struct termiox -{ - __u16 x_hflag; - __u16 x_cflag; - __u16 x_rflag[NFF]; - __u16 x_sflag; -}; - -#define RTSXOFF 0x0001 /* RTS flow control on input */ -#define CTSXON 0x0002 /* CTS flow control on output */ -#define DTRXOFF 0x0004 /* DTR flow control on input */ -#define DSRXON 0x0008 /* DCD flow control on output */ - #endif diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c index 11b554ce07ff..1204c438e87d 100644 --- a/net/nfc/nci/uart.c +++ b/net/nfc/nci/uart.c @@ -292,7 +292,8 @@ static int nci_uart_tty_ioctl(struct tty_struct *tty, struct file *file, /* We don't provide read/write/poll interface for user space. */ static ssize_t nci_uart_tty_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) { return 0; }