bnx2x: (NPAR) prevent HW access in D3 state

Changing speed setting in NPAR requires HW access, this patch
delays the access to D0 state when performed in D3.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Dmitry Kravkov 2011-03-06 10:50:44 +00:00 committed by David S. Miller
parent 9fdc3e9566
commit e3835b9933
4 changed files with 40 additions and 10 deletions

View File

@ -1211,6 +1211,7 @@ struct bnx2x {
/* DCBX Negotation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
u32 pending_max;
};
/**

View File

@ -996,6 +996,23 @@ void bnx2x_free_skbs(struct bnx2x *bp)
bnx2x_free_rx_skbs(bp);
}
void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
{
/* load old values */
u32 mf_cfg = bp->mf_config[BP_VN(bp)];
if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
/* leave all but MAX value */
mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
/* set new MAX value */
mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
& FUNC_MF_CFG_MAX_BW_MASK;
bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
}
}
static void bnx2x_free_msix_irqs(struct bnx2x *bp)
{
int i, offset = 1;
@ -1464,6 +1481,11 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
bnx2x_set_eth_mac(bp, 1);
if (bp->pending_max) {
bnx2x_update_max_mf_config(bp, bp->pending_max);
bp->pending_max = 0;
}
if (bp->port.pmf)
bnx2x_initial_phy_init(bp, load_mode);

View File

@ -341,6 +341,15 @@ void bnx2x_dcbx_init(struct bnx2x *bp);
*/
int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
/**
* Updates MAX part of MF configuration in HW
* (if required)
*
* @param bp
* @param value
*/
void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
/* dev_close main block */
int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode);

View File

@ -238,7 +238,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
speed |= (cmd->speed_hi << 16);
if (IS_MF_SI(bp)) {
u32 param = 0, part;
u32 part;
u32 line_speed = bp->link_vars.line_speed;
/* use 10G if no link detected */
@ -251,24 +251,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
REQ_BC_VER_4_SET_MF_BW);
return -EINVAL;
}
part = (speed * 100) / line_speed;
if (line_speed < speed || !part) {
BNX2X_DEV_INFO("Speed setting should be in a range "
"from 1%% to 100%% "
"of actual line speed\n");
return -EINVAL;
}
/* load old values */
param = bp->mf_config[BP_VN(bp)];
/* leave only MIN value */
param &= FUNC_MF_CFG_MIN_BW_MASK;
if (bp->state != BNX2X_STATE_OPEN)
/* store value for following "load" */
bp->pending_max = part;
else
bnx2x_update_max_mf_config(bp, part);
/* set new MAX value */
param |= (part << FUNC_MF_CFG_MAX_BW_SHIFT)
& FUNC_MF_CFG_MAX_BW_MASK;
bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, param);
return 0;
}