powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
Add support for PCI-e on the AMCC 460SX boards Signed-off-by: Tirumala Marri <tmarri@amcc.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
Tirumala Marri
Josh Boyer
parent
1ed31d6db9
commit
e2efc09e52
|
|
@ -234,10 +234,132 @@
|
|||
has-inverted-stacr-oc;
|
||||
has-new-stacr-staopc;
|
||||
};
|
||||
};
|
||||
PCIE0: pciex@d00000000 {
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x0>; /* port number */
|
||||
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
|
||||
0x0000000c 0x10000000 0x00001000>; /* Registers */
|
||||
dcr-reg = <0x100 0x020>;
|
||||
sdr-base = <0x300>;
|
||||
|
||||
/* Outbound ranges, one memory and one IO,
|
||||
* later cannot be changed
|
||||
*/
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
|
||||
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
||||
|
||||
/* Inbound 2GB range starting at 0 */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
|
||||
/* This drives busses 10 to 0x1f */
|
||||
bus-range = <0x10 0x1f>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
|
||||
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
|
||||
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
|
||||
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
|
||||
};
|
||||
|
||||
PCIE1: pciex@d20000000 {
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x1>; /* port number */
|
||||
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
|
||||
0x0000000c 0x10001000 0x00001000>; /* Registers */
|
||||
dcr-reg = <0x120 0x020>;
|
||||
sdr-base = <0x340>;
|
||||
|
||||
/* Outbound ranges, one memory and one IO,
|
||||
* later cannot be changed
|
||||
*/
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
|
||||
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
|
||||
|
||||
/* Inbound 2GB range starting at 0 */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
|
||||
/* This drives busses 10 to 0x1f */
|
||||
bus-range = <0x20 0x2f>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
|
||||
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
|
||||
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
|
||||
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
|
||||
};
|
||||
|
||||
PCIE2: pciex@d40000000 {
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x2>; /* port number */
|
||||
reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
|
||||
0x0000000c 0x10002000 0x00001000>; /* Registers */
|
||||
dcr-reg = <0x140 0x020>;
|
||||
sdr-base = <0x370>;
|
||||
|
||||
/* Outbound ranges, one memory and one IO,
|
||||
* later cannot be changed
|
||||
*/
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
|
||||
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
|
||||
|
||||
/* Inbound 2GB range starting at 0 */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
|
||||
/* This drives busses 10 to 0x1f */
|
||||
bus-range = <0x30 0x3f>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
|
||||
0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
|
||||
0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
|
||||
0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "/plb/opb/serial@ef600200";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -974,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
|
|||
.setup_utl = ppc460ex_pciex_init_utl,
|
||||
};
|
||||
|
||||
static int __init ppc460sx_pciex_core_init(struct device_node *np)
|
||||
{
|
||||
/* HSS drive amplitude */
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
|
||||
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
|
||||
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
|
||||
|
||||
/* HSS TX pre-emphasis */
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
|
||||
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
|
||||
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
|
||||
|
||||
/* HSS TX calibration control */
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
|
||||
|
||||
/* HSS TX slew control */
|
||||
mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
|
||||
mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
|
||||
mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/* De-assert PLLRESET */
|
||||
dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
|
||||
|
||||
/* Reset DL, UTL, GPL before configuration */
|
||||
mtdcri(SDR0, PESDR0_460SX_RCSSET,
|
||||
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
|
||||
mtdcri(SDR0, PESDR1_460SX_RCSSET,
|
||||
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
|
||||
mtdcri(SDR0, PESDR2_460SX_RCSSET,
|
||||
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/*
|
||||
* If bifurcation is not enabled, u-boot would have disabled the
|
||||
* third PCIe port
|
||||
*/
|
||||
if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
|
||||
0x00000001)) {
|
||||
printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
|
||||
printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
|
||||
return 3;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
|
||||
return 2;
|
||||
}
|
||||
|
||||
static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
|
||||
{
|
||||
|
||||
if (port->endpoint)
|
||||
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
|
||||
0x01000000, 0);
|
||||
else
|
||||
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
|
||||
0, 0x01000000);
|
||||
|
||||
/*Gen-1*/
|
||||
mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
|
||||
|
||||
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
|
||||
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
|
||||
PESDRx_RCSSET_RSTPYN);
|
||||
|
||||
port->has_ibpre = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
|
||||
{
|
||||
/* Max 128 Bytes */
|
||||
out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
|
||||
.core_init = ppc460sx_pciex_core_init,
|
||||
.port_init_hw = ppc460sx_pciex_init_port_hw,
|
||||
.setup_utl = ppc460sx_pciex_init_utl,
|
||||
};
|
||||
|
||||
#endif /* CONFIG_44x */
|
||||
|
||||
#ifdef CONFIG_40x
|
||||
|
|
@ -1089,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
|
|||
}
|
||||
if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
|
||||
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
|
||||
if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
|
||||
ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
|
||||
#endif /* CONFIG_44x */
|
||||
#ifdef CONFIG_40x
|
||||
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
|
||||
|
|
|
|||
|
|
@ -323,6 +323,64 @@
|
|||
#define PESDR0_460EX_IHS1 0x036C
|
||||
#define PESDR0_460EX_IHS2 0x036D
|
||||
|
||||
/*
|
||||
* 460SX addtional DCRs
|
||||
*/
|
||||
#define PESDRn_460SX_RCEI 0x02
|
||||
|
||||
#define PESDR0_460SX_HSSL0DAMP 0x320
|
||||
#define PESDR0_460SX_HSSL1DAMP 0x321
|
||||
#define PESDR0_460SX_HSSL2DAMP 0x322
|
||||
#define PESDR0_460SX_HSSL3DAMP 0x323
|
||||
#define PESDR0_460SX_HSSL4DAMP 0x324
|
||||
#define PESDR0_460SX_HSSL5DAMP 0x325
|
||||
#define PESDR0_460SX_HSSL6DAMP 0x326
|
||||
#define PESDR0_460SX_HSSL7DAMP 0x327
|
||||
|
||||
#define PESDR1_460SX_HSSL0DAMP 0x354
|
||||
#define PESDR1_460SX_HSSL1DAMP 0x355
|
||||
#define PESDR1_460SX_HSSL2DAMP 0x356
|
||||
#define PESDR1_460SX_HSSL3DAMP 0x357
|
||||
|
||||
#define PESDR2_460SX_HSSL0DAMP 0x384
|
||||
#define PESDR2_460SX_HSSL1DAMP 0x385
|
||||
#define PESDR2_460SX_HSSL2DAMP 0x386
|
||||
#define PESDR2_460SX_HSSL3DAMP 0x387
|
||||
|
||||
#define PESDR0_460SX_HSSL0COEFA 0x328
|
||||
#define PESDR0_460SX_HSSL1COEFA 0x329
|
||||
#define PESDR0_460SX_HSSL2COEFA 0x32A
|
||||
#define PESDR0_460SX_HSSL3COEFA 0x32B
|
||||
#define PESDR0_460SX_HSSL4COEFA 0x32C
|
||||
#define PESDR0_460SX_HSSL5COEFA 0x32D
|
||||
#define PESDR0_460SX_HSSL6COEFA 0x32E
|
||||
#define PESDR0_460SX_HSSL7COEFA 0x32F
|
||||
|
||||
#define PESDR1_460SX_HSSL0COEFA 0x358
|
||||
#define PESDR1_460SX_HSSL1COEFA 0x359
|
||||
#define PESDR1_460SX_HSSL2COEFA 0x35A
|
||||
#define PESDR1_460SX_HSSL3COEFA 0x35B
|
||||
|
||||
#define PESDR2_460SX_HSSL0COEFA 0x388
|
||||
#define PESDR2_460SX_HSSL1COEFA 0x389
|
||||
#define PESDR2_460SX_HSSL2COEFA 0x38A
|
||||
#define PESDR2_460SX_HSSL3COEFA 0x38B
|
||||
|
||||
#define PESDR0_460SX_HSSL1CALDRV 0x339
|
||||
#define PESDR1_460SX_HSSL1CALDRV 0x361
|
||||
#define PESDR2_460SX_HSSL1CALDRV 0x391
|
||||
|
||||
#define PESDR0_460SX_HSSSLEW 0x338
|
||||
#define PESDR1_460SX_HSSSLEW 0x360
|
||||
#define PESDR2_460SX_HSSSLEW 0x390
|
||||
|
||||
#define PESDR0_460SX_HSSCTLSET 0x31E
|
||||
#define PESDR1_460SX_HSSCTLSET 0x352
|
||||
#define PESDR2_460SX_HSSCTLSET 0x382
|
||||
|
||||
#define PESDR0_460SX_RCSSET 0x304
|
||||
#define PESDR1_460SX_RCSSET 0x344
|
||||
#define PESDR2_460SX_RCSSET 0x374
|
||||
/*
|
||||
* Of the above, some are common offsets from the base
|
||||
*/
|
||||
|
|
|
|||
Loading…
Reference in New Issue