hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

iwlwifi: move content of iwl_probe to post fetch_fw 

This will allow to have different behavior depending on the fw.
Different fw APIs require completely different implementation
of the mac80211 APIs. Each of these implementations is called an
op_mode.

The current op_mode is called DVM which states for dual virtual MAC.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
This commit is contained in:
Emmanuel Grumbach 2012-02-07 10:35:18 +02:00 committed by Wey-Yi Guy
parent e9daccd732
commit e211b2427a
4 changed files with 67 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
drivers/net/wireless/iwlwifi/iwl-agn.c
View File

@ -1142,9 +1142,11 @@ static void iwl_debug_config(struct iwl_priv *priv)
#endif
}
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg)
int iwl_op_mode_dvm_start(struct iwl_bus *bus,
const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg)
{
struct iwl_fw *fw = &nic(bus)->fw;
int err = 0;
struct iwl_priv *priv;
struct ieee80211_hw *hw;
@ -1172,7 +1174,6 @@ int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
iwl_debug_config(priv);
IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
cfg(priv) = cfg;
/* is antenna coupling more than 35dB ? */
priv->bt_ant_couple_ok =
@ -1260,12 +1261,44 @@ int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
init_completion(&nic(priv)->request_firmware_complete);
snprintf(priv->hw->wiphy->fw_version,
sizeof(priv->hw->wiphy->fw_version),
"%s", fw->fw_version);
err = iwl_request_firmware(nic(priv), true);
priv->new_scan_threshold_behaviour =
!!(fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
if (fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
} else {
priv->sta_key_max_num = STA_KEY_MAX_NUM;
priv->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
}
priv->phy_calib_chain_noise_reset_cmd =
fw->ucode_capa.standard_phy_calibration_size;
priv->phy_calib_chain_noise_gain_cmd =
fw->ucode_capa.standard_phy_calibration_size + 1;
/* initialize all valid contexts */
iwl_init_context(priv, fw->ucode_capa.flags);
/**************************************************
* This is still part of probe() in a sense...
*
* 9. Setup and register with mac80211 and debugfs
**************************************************/
err = iwlagn_mac_setup_register(priv, &fw->ucode_capa);
if (err)
goto out_destroy_workqueue;
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
IWL_ERR(priv,
"failed to create debugfs files. Ignoring error: %d\n",
err);
return 0;
out_destroy_workqueue:
@ -1281,6 +1314,16 @@ out:
return err;
}
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg)
{
bus->shrd->cfg = cfg;
init_completion(&nic(bus)->request_firmware_complete);
return iwl_request_firmware(nic(bus), true);
}
void __devexit iwl_remove(struct iwl_priv * priv)
{
wait_for_completion(&nic(priv)->request_firmware_complete);

3
drivers/net/wireless/iwlwifi/iwl-shared.h
View File

@ -532,6 +532,9 @@ enum iwl_rxon_context_id {
NUM_IWL_RXON_CTX
};
int iwl_op_mode_dvm_start(struct iwl_bus *bus,
const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg);
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg);
void __devexit iwl_remove(struct iwl_priv * priv);

64
drivers/net/wireless/iwlwifi/iwl-ucode.c
View File

@ -687,7 +687,6 @@ int iwl_run_init_ucode(struct iwl_trans *trans)
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
#define UCODE_EXPERIMENTAL_INDEX 100
#define UCODE_EXPERIMENTAL_TAG "exp"
int __must_check iwl_request_firmware(struct iwl_nic *nic, bool first)
@ -1047,7 +1046,6 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
struct iwl_nic *nic = context;
struct iwl_cfg *cfg = cfg(nic);
struct iwl_fw *fw = &nic->fw;
struct iwl_priv *priv = priv(nic); /* temporary */
struct iwl_ucode_header *ucode;
int err;
struct iwlagn_firmware_pieces pieces;
@ -1127,10 +1125,6 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
IWL_INFO(nic, "loaded firmware version %s", nic->fw.fw_version);
snprintf(priv->hw->wiphy->fw_version,
sizeof(priv->hw->wiphy->fw_version),
"%s", nic->fw.fw_version);
/*
* For any of the failures below (before allocating pci memory)
* we will try to load a version with a smaller API -- maybe the
@ -1235,9 +1229,14 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
#ifndef CONFIG_IWLWIFI_P2P
fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
#endif
priv->new_scan_threshold_behaviour =
!!(fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
/*
* figure out the offset of chain noise reset and gain commands
* base on the size of standard phy calibration commands table size
*/
if (fw->ucode_capa.standard_phy_calibration_size >
IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
fw->ucode_capa.standard_phy_calibration_size =
IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
if (!(cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE))
fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
@ -1249,63 +1248,28 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
if (!(fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN))
fw->ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
if (fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
nic->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
} else {
priv->sta_key_max_num = STA_KEY_MAX_NUM;
nic->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
}
/*
* figure out the offset of chain noise reset and gain commands
* base on the size of standard phy calibration commands table size
*/
if (fw->ucode_capa.standard_phy_calibration_size >
IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
fw->ucode_capa.standard_phy_calibration_size =
IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
priv->phy_calib_chain_noise_reset_cmd =
fw->ucode_capa.standard_phy_calibration_size;
priv->phy_calib_chain_noise_gain_cmd =
fw->ucode_capa.standard_phy_calibration_size + 1;
/* initialize all valid contexts */
iwl_init_context(priv, fw->ucode_capa.flags);
/**************************************************
* This is still part of probe() in a sense...
*
* 9. Setup and register with mac80211 and debugfs
**************************************************/
err = iwlagn_mac_setup_register(priv, &fw->ucode_capa);
if (err)
goto out_unbind;
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
IWL_ERR(nic,
"failed to create debugfs files. Ignoring error: %d\n",
err);
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
complete(&nic->request_firmware_complete);
if (iwl_op_mode_dvm_start(bus(nic), trans(nic)->ops, cfg))
goto out_unbind;
return;
try_again:
/* try next, if any */
release_firmware(ucode_raw);
if (iwl_request_firmware(nic, false))
goto out_unbind;
release_firmware(ucode_raw);
return;
err_pci_alloc:
IWL_ERR(nic, "failed to allocate pci memory\n");
iwl_dealloc_ucode(nic);
release_firmware(ucode_raw);
out_unbind:
complete(&nic->request_firmware_complete);
device_release_driver(trans(nic)->dev);
release_firmware(ucode_raw);
}

2
drivers/net/wireless/iwlwifi/iwl-wifi.h
View File

@ -66,6 +66,8 @@
#include "iwl-shared.h"
#include "iwl-ucode.h"
#define UCODE_EXPERIMENTAL_INDEX 100
/**
* struct iwl_nic - nic common data
* @fw: the iwl_fw structure