drm/i915: Populate output_types from .get_config()

Rather than having the caller of .get_config() set output_types based on
encoder->type, let's just have .get_config() itself populate
output_types. This way we are isolated from encoder->type, which won't
be useable for this purpose anyway soon (at least for DDI encoders).

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drivers/gpu/drm/i915/intel_crt.c

@@ -119,6 +119,8 @@ static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
 static void intel_crt_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
 {
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
+
 	pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
 
 	pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;

drivers/gpu/drm/i915/intel_ddi.c

@@ -2595,12 +2595,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 			pipe_config->hdmi_high_tmds_clock_ratio = true;
 		/* fall through */
 	case TRANS_DDI_MODE_SELECT_DVI:
+		pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
 		pipe_config->lane_count = 4;
 		break;
 	case TRANS_DDI_MODE_SELECT_FDI:
+		pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
 		break;
 	case TRANS_DDI_MODE_SELECT_DP_SST:
+		if (encoder->type == INTEL_OUTPUT_EDP)
+			pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
+		else
+			pipe_config->output_types |= BIT(INTEL_OUTPUT_DP);
+		pipe_config->lane_count =
+			((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
+		intel_dp_get_m_n(intel_crtc, pipe_config);
+		break;
 	case TRANS_DDI_MODE_SELECT_DP_MST:
+		pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
 		pipe_config->lane_count =
 			((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
 		intel_dp_get_m_n(intel_crtc, pipe_config);

drivers/gpu/drm/i915/intel_display.c

@@ -11562,11 +11562,9 @@ verify_crtc_state(struct drm_crtc *crtc,
 				"Encoder connected to wrong pipe %c\n",
 				pipe_name(pipe));
 
-		if (active) {
+		if (active)
-			pipe_config->output_types |= 1 << encoder->type;
 			encoder->get_config(encoder, pipe_config);
 	}
-	}
 
 	intel_crtc_compute_pixel_rate(pipe_config);
 
@@ -14960,7 +14958,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			crtc_state = to_intel_crtc_state(crtc->base.state);
 
 			encoder->base.crtc = &crtc->base;
-			crtc_state->output_types |= 1 << encoder->type;
 			encoder->get_config(encoder, crtc_state);
 		} else {
 			encoder->base.crtc = NULL;

drivers/gpu/drm/i915/intel_dp.c

@@ -2621,6 +2621,11 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 
+	if (encoder->type == INTEL_OUTPUT_EDP)
+		pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
+	else
+		pipe_config->output_types |= BIT(INTEL_OUTPUT_DP);
+
 	tmp = I915_READ(intel_dp->output_reg);
 
 	pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;

drivers/gpu/drm/i915/intel_dp_mst.c

@@ -291,6 +291,8 @@ static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder,
 	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
 	u32 temp, flags = 0;
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
+
 	pipe_config->has_audio =
 		intel_ddi_is_audio_enabled(dev_priv, crtc);
 

drivers/gpu/drm/i915/intel_dsi.c

@@ -1243,6 +1243,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
 	u32 pclk;
 	DRM_DEBUG_KMS("\n");
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
+
 	if (IS_GEN9_LP(dev_priv))
 		bxt_dsi_get_pipe_config(encoder, pipe_config);
 

drivers/gpu/drm/i915/intel_dvo.c

@@ -159,6 +159,8 @@ static void intel_dvo_get_config(struct intel_encoder *encoder,
 	struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 	u32 tmp, flags = 0;
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_DVO);
+
 	tmp = I915_READ(intel_dvo->dev.dvo_reg);
 	if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 		flags |= DRM_MODE_FLAG_PHSYNC;

drivers/gpu/drm/i915/intel_hdmi.c

@@ -957,6 +957,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
 	u32 tmp, flags = 0;
 	int dotclock;
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
+
 	tmp = I915_READ(intel_hdmi->hdmi_reg);
 
 	if (tmp & SDVO_HSYNC_ACTIVE_HIGH)

drivers/gpu/drm/i915/intel_lvds.c

@@ -125,6 +125,8 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	u32 tmp, flags = 0;
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_LVDS);
+
 	tmp = I915_READ(lvds_encoder->reg);
 	if (tmp & LVDS_HSYNC_POLARITY)
 		flags |= DRM_MODE_FLAG_NHSYNC;

drivers/gpu/drm/i915/intel_sdvo.c

@@ -1429,6 +1429,8 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 	u8 val;
 	bool ret;
 
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_SDVO);
+
 	sdvox = I915_READ(intel_sdvo->sdvo_reg);
 
 	ret = intel_sdvo_get_input_timing(intel_sdvo, &dtd);

drivers/gpu/drm/i915/intel_tv.c

@@ -868,6 +868,8 @@ static void
 intel_tv_get_config(struct intel_encoder *encoder,
 		    struct intel_crtc_state *pipe_config)
 {
+	pipe_config->output_types |= BIT(INTEL_OUTPUT_TVOUT);
+
 	pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
 }