hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

gpio: gpiolib: Generalise state persistence beyond sleep 

General support for state persistence is added to gpiolib with the
introduction of a new pinconf parameter to propagate the request to
hardware. The existing persistence support for sleep is adapted to
include hardware support if the GPIO driver provides it. Persistence
continues to be enabled by default; in-kernel consumers can opt out, but
userspace (currently) does not have a choice.

The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are
renamed, dropping the SLEEP prefix to reflect that the concept is no
longer sleep-specific.  I feel that renaming to just *_MAY_LOSE_VALUE
could initially be misinterpreted, so I've further changed the symbols
to *_TRANSITORY and *_PERSISTENT to address this.

The sysfs interface is modified only to keep consistency with the
chardev interface in enforcing persistence for userspace exports.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Andrew Jeffery 2017-11-30 14:25:24 +10:30 committed by Linus Walleij
parent e2843cb6cd
commit e10f72bf4b
9 changed files with 87 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/gpio/gpiolib-of.c
View File

@ -153,8 +153,8 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
*flags |= GPIO_OPEN_SOURCE;
}
if (of_flags & OF_GPIO_SLEEP_MAY_LOSE_VALUE)
*flags |= GPIO_SLEEP_MAY_LOSE_VALUE;
if (of_flags & OF_GPIO_TRANSITORY)
*flags |= GPIO_TRANSITORY;
return desc;
}
@ -214,6 +214,8 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
if (xlate_flags & OF_GPIO_ACTIVE_LOW)
*lflags |= GPIO_ACTIVE_LOW;
if (xlate_flags & OF_GPIO_TRANSITORY)
*lflags |= GPIO_TRANSITORY;
if (of_property_read_bool(np, "input"))
*dflags |= GPIOD_IN;

14
drivers/gpio/gpiolib-sysfs.c
View File

@ -474,11 +474,15 @@ static ssize_t export_store(struct class *class,
status = -ENODEV;
goto done;
}
status = gpiod_export(desc, true);
if (status < 0)
gpiod_free(desc);
else
set_bit(FLAG_SYSFS, &desc->flags);
status = gpiod_set_transitory(desc, false);
if (!status) {
status = gpiod_export(desc, true);
if (status < 0)
gpiod_free(desc);
else
set_bit(FLAG_SYSFS, &desc->flags);
}
done:
if (status)

61
drivers/gpio/gpiolib.c
View File

@ -514,6 +514,10 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
ret = gpiod_set_transitory(desc, false);
if (ret < 0)
goto out_free_descs;
/*
* Lines have to be requested explicitly for input
* or output, else the line will be treated "as is".
@ -2529,6 +2533,49 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
}
EXPORT_SYMBOL_GPL(gpiod_set_debounce);
/**
* gpiod_set_transitory - Lose or retain GPIO state on suspend or reset
* @desc: descriptor of the GPIO for which to configure persistence
* @transitory: True to lose state on suspend or reset, false for persistence
*
* Returns:
* 0 on success, otherwise a negative error code.
*/
int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
{
struct gpio_chip *chip;
unsigned long packed;
int gpio;
int rc;
/*
* Handle FLAG_TRANSITORY first, enabling queries to gpiolib for
* persistence state.
*/
if (transitory)
set_bit(FLAG_TRANSITORY, &desc->flags);
else
clear_bit(FLAG_TRANSITORY, &desc->flags);
/* If the driver supports it, set the persistence state now */
chip = desc->gdev->chip;
if (!chip->set_config)
return 0;
packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
!transitory);
gpio = gpio_chip_hwgpio(desc);
rc = chip->set_config(chip, gpio, packed);
if (rc == -ENOTSUPP) {
dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
gpio);
return 0;
}
return rc;
}
EXPORT_SYMBOL_GPL(gpiod_set_transitory);
/**
* gpiod_is_active_low - test whether a GPIO is active-low or not
* @desc: the gpio descriptor to test
@ -3116,8 +3163,7 @@ bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset)
if (offset >= chip->ngpio)
return false;
return !test_bit(FLAG_SLEEP_MAY_LOSE_VALUE,
&chip->gpiodev->descs[offset].flags);
return !test_bit(FLAG_TRANSITORY, &chip->gpiodev->descs[offset].flags);
}
EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
@ -3554,8 +3600,10 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
if (lflags & GPIO_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
if (lflags & GPIO_SLEEP_MAY_LOSE_VALUE)
set_bit(FLAG_SLEEP_MAY_LOSE_VALUE, &desc->flags);
status = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY));
if (status < 0)
return status;
/* No particular flag request, return here... */
if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
@ -3669,6 +3717,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
bool active_low = false;
bool single_ended = false;
bool open_drain = false;
bool transitory = false;
int ret;
if (!fwnode)
@ -3683,6 +3732,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
active_low = flags & OF_GPIO_ACTIVE_LOW;
single_ended = flags & OF_GPIO_SINGLE_ENDED;
open_drain = flags & OF_GPIO_OPEN_DRAIN;
transitory = flags & OF_GPIO_TRANSITORY;
}
} else if (is_acpi_node(fwnode)) {
struct acpi_gpio_info info;
@ -3711,6 +3761,9 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
lflags |= GPIO_OPEN_SOURCE;
}
if (transitory)
lflags |= GPIO_TRANSITORY;
ret = gpiod_configure_flags(desc, propname, lflags, dflags);
if (ret < 0) {
gpiod_put(desc);

2
drivers/gpio/gpiolib.h
View File

@ -209,7 +209,7 @@ struct gpio_desc {
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
#define FLAG_SLEEP_MAY_LOSE_VALUE 12 /* GPIO may lose value in sleep */
#define FLAG_TRANSITORY 12 /* GPIO may lose value in sleep or reset */
/* Connection label */
const char *label;

6
include/dt-bindings/gpio/gpio.h
View File

@ -29,8 +29,8 @@
#define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_DRAIN)
#define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_SOURCE)
/* Bit 3 express GPIO suspend/resume persistence */
#define GPIO_SLEEP_MAINTAIN_VALUE 0
#define GPIO_SLEEP_MAY_LOSE_VALUE 8
/* Bit 3 express GPIO suspend/resume and reset persistence */
#define GPIO_PERSISTENT 0
#define GPIO_TRANSITORY 8
#endif

8
include/linux/gpio/consumer.h
View File

@ -139,6 +139,7 @@ void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
int *value_array);
int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
int gpiod_set_transitory(struct gpio_desc *desc, bool transitory);
int gpiod_is_active_low(const struct gpio_desc *desc);
int gpiod_cansleep(const struct gpio_desc *desc);
@ -431,6 +432,13 @@ static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
return -ENOSYS;
}
static inline int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
{
/* GPIO can never have been requested */
WARN_ON(1);
return -ENOSYS;
}
static inline int gpiod_is_active_low(const struct gpio_desc *desc)
{
/* GPIO can never have been requested */

4
include/linux/gpio/machine.h
View File

@ -10,8 +10,8 @@ enum gpio_lookup_flags {
GPIO_ACTIVE_LOW = (1 << 0),
GPIO_OPEN_DRAIN = (1 << 1),
GPIO_OPEN_SOURCE = (1 << 2),
GPIO_SLEEP_MAINTAIN_VALUE = (0 << 3),
GPIO_SLEEP_MAY_LOSE_VALUE = (1 << 3),
GPIO_PERSISTENT = (0 << 3),
GPIO_TRANSITORY = (1 << 3),
};
/**

2
include/linux/of_gpio.h
View File

@ -31,7 +31,7 @@ enum of_gpio_flags {
OF_GPIO_ACTIVE_LOW = 0x1,
OF_GPIO_SINGLE_ENDED = 0x2,
OF_GPIO_OPEN_DRAIN = 0x4,
OF_GPIO_SLEEP_MAY_LOSE_VALUE = 0x8,
OF_GPIO_TRANSITORY = 0x8,
};
#ifdef CONFIG_OF_GPIO

2
include/linux/pinctrl/pinconf-generic.h
View File

@ -94,6 +94,7 @@
* or latch delay (on outputs) this parameter (in a custom format)
* specifies the clock skew or latch delay. It typically controls how
* many double inverters are put in front of the line.
* @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset
* @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
* you need to pass in custom configurations to the pin controller, use
* PIN_CONFIG_END+1 as the base offset.
@ -122,6 +123,7 @@ enum pin_config_param {
PIN_CONFIG_SLEEP_HARDWARE_STATE,
PIN_CONFIG_SLEW_RATE,
PIN_CONFIG_SKEW_DELAY,
PIN_CONFIG_PERSIST_STATE,
PIN_CONFIG_END = 0x7F,
PIN_CONFIG_MAX = 0xFF,
};