[Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

arch/blackfin/Kconfig

@@ -268,11 +268,6 @@ config MEM_MT48LC32M16A2TG_75
 	depends on (BFIN527_EZKIT)
 	default y
 
-config BFIN_SHARED_FLASH_ENET
-	bool
-	depends on (BFIN533_STAMP)
-	default y
-
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"

arch/blackfin/mach-bf533/boards/stamp.c

@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -108,6 +109,50 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct mtd_partition stamp_partitions[] = {
+	{
+		.name   = "Bootloader",
+		.size   = 0x20000,
+		.offset = 0,
+	}, {
+		.name   = "Kernel",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "RootFS",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+	.width    = 2,
+	.parts    = stamp_partitions,
+	.nr_parts = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x203fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_ENET_FLASH_PIN,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device stamp_flash_device = {
+	.name          = "BF5xx-Flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stamp_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(stamp_flash_resource),
+	.resource      = stamp_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
@@ -457,6 +502,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+	&stamp_flash_device,
 };
 
 static int __init stamp_init(void)
@@ -469,13 +515,11 @@ static int __init stamp_init(void)
 		return ret;
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-# if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
 	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
 	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
 	bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
 	SSYNC();
 #endif
-#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info,
@@ -491,10 +535,8 @@ arch_initcall(stamp_init);
 
 void native_machine_restart(char *cmd)
 {
-#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
 #define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
 	bfin_write_FIO_INEN(~BIT_TO_SET);
 	bfin_write_FIO_DIR(BIT_TO_SET);
 	bfin_write_FIO_FLAG_C(BIT_TO_SET);
-#endif
 }

arch/blackfin/mach-bf537/boards/stamp.c

@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -339,6 +340,49 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct mtd_partition stamp_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x20000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0xE0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = 0x400000 - 0x20000 - 0xE0000 - 0x10000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "MAC Address",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = 0x3F0000,
+		.mask_flags = MTD_WRITEABLE,
+	}
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+	.width      = 2,
+	.parts      = stamp_partitions,
+	.nr_parts   = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stamp_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stamp_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &stamp_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
@@ -761,6 +805,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+	&stamp_flash_device,
 };
 
 static int __init stamp_init(void)

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
@@ -327,6 +328,44 @@ static struct platform_device bf54x_sdh_device = {
 };
 #endif
 
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x20000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0xE0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x20ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
@@ -589,6 +628,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+	&ezkit_flash_device,
 };
 
 static int __init stamp_init(void)

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -29,6 +29,9 @@
 
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -155,6 +158,44 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x20000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0xE0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+
 #ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
@@ -318,6 +359,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+	&ezkit_flash_device,
 };
 
 static int __init ezkit_init(void)