bnx2x: Fix remote fault handling
Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
b507766205
commit
de6f3377d2
|
@ -1204,6 +1204,8 @@ struct drv_port_mb {
|
|||
|
||||
#define LINK_STATUS_PFC_ENABLED 0x20000000
|
||||
|
||||
#define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000
|
||||
|
||||
u32 port_stx;
|
||||
|
||||
u32 stat_nig_timer;
|
||||
|
|
|
@ -1745,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params,
|
|||
|
||||
DP(NETIF_MSG_LINK, "enabling EMAC\n");
|
||||
|
||||
/* Disable BMAC */
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
||||
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
||||
|
||||
/* enable emac and not bmac */
|
||||
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
|
||||
|
||||
|
@ -2599,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params,
|
|||
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
|
||||
wb_data, 2);
|
||||
|
||||
if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
|
||||
REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS,
|
||||
wb_data, 2);
|
||||
if (wb_data[0] > 0)
|
||||
return -ESRCH;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -2670,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params,
|
|||
udelay(30);
|
||||
bnx2x_update_pfc_bmac2(params, vars, is_lb);
|
||||
|
||||
if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
|
||||
REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT,
|
||||
wb_data, 2);
|
||||
if (wb_data[0] > 0) {
|
||||
DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n",
|
||||
wb_data[0]);
|
||||
return -ESRCH;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -4369,6 +4357,9 @@ void bnx2x_link_status_update(struct link_params *params,
|
|||
|
||||
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
|
||||
vars->phy_flags = PHY_XGXS_FLAG;
|
||||
if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
|
||||
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
|
||||
|
||||
if (vars->link_up) {
|
||||
DP(NETIF_MSG_LINK, "phy link up\n");
|
||||
|
||||
|
@ -4460,6 +4451,8 @@ void bnx2x_link_status_update(struct link_params *params,
|
|||
|
||||
/* indicate no mac active */
|
||||
vars->mac_type = MAC_TYPE_NONE;
|
||||
if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
|
||||
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
|
||||
}
|
||||
|
||||
/* Sync media type */
|
||||
|
@ -6176,6 +6169,7 @@ static int bnx2x_update_link_down(struct link_params *params,
|
|||
/* update shared memory */
|
||||
vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
|
||||
LINK_STATUS_LINK_UP |
|
||||
LINK_STATUS_PHYSICAL_LINK_FLAG |
|
||||
LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
|
||||
LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
|
||||
LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
|
||||
|
@ -6213,7 +6207,8 @@ static int bnx2x_update_link_up(struct link_params *params,
|
|||
u8 port = params->port;
|
||||
int rc = 0;
|
||||
|
||||
vars->link_status |= LINK_STATUS_LINK_UP;
|
||||
vars->link_status |= (LINK_STATUS_LINK_UP |
|
||||
LINK_STATUS_PHYSICAL_LINK_FLAG);
|
||||
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
|
||||
|
||||
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
||||
|
@ -8132,7 +8127,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
|
|||
offsetof(struct shmem_region, dev_info.
|
||||
port_feature_config[params->port].
|
||||
config));
|
||||
|
||||
bnx2x_set_gpio_int(bp, gpio_num,
|
||||
MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
|
||||
gpio_port);
|
||||
|
@ -8141,8 +8135,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
|
|||
* Disable transmit for this module
|
||||
*/
|
||||
phy->media_type = ETH_PHY_NOT_PRESENT;
|
||||
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
|
||||
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
|
||||
if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
|
||||
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) ||
|
||||
CHIP_IS_E3(bp))
|
||||
bnx2x_sfp_set_transmitter(params, phy, 0);
|
||||
}
|
||||
}
|
||||
|
@ -8244,9 +8239,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
|
|||
u16 cnt, val, tmp1;
|
||||
struct bnx2x *bp = params->bp;
|
||||
|
||||
/* SPF+ PHY: Set flag to check for Tx error */
|
||||
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
|
||||
|
||||
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
||||
MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
|
||||
/* HW reset */
|
||||
|
@ -8430,9 +8422,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
|
|||
struct bnx2x *bp = params->bp;
|
||||
DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
|
||||
|
||||
/* SPF+ PHY: Set flag to check for Tx error */
|
||||
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
|
||||
|
||||
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
|
||||
bnx2x_wait_reset_complete(bp, phy, params);
|
||||
|
||||
|
@ -8601,9 +8590,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
|
|||
struct bnx2x *bp = params->bp;
|
||||
/* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
|
||||
|
||||
/* SPF+ PHY: Set flag to check for Tx error */
|
||||
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
|
||||
|
||||
bnx2x_wait_reset_complete(bp, phy, params);
|
||||
rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
|
||||
/* Should be 0x6 to enable XS on Tx side. */
|
||||
|
@ -10619,7 +10605,8 @@ static struct bnx2x_phy phy_warpcore = {
|
|||
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
|
||||
.addr = 0xff,
|
||||
.def_md_devad = 0,
|
||||
.flags = FLAGS_HW_LOCK_REQUIRED,
|
||||
.flags = (FLAGS_HW_LOCK_REQUIRED |
|
||||
FLAGS_TX_ERROR_CHECK),
|
||||
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.mdio_ctrl = 0,
|
||||
|
@ -10745,7 +10732,8 @@ static struct bnx2x_phy phy_8706 = {
|
|||
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
|
||||
.addr = 0xff,
|
||||
.def_md_devad = 0,
|
||||
.flags = FLAGS_INIT_XGXS_FIRST,
|
||||
.flags = (FLAGS_INIT_XGXS_FIRST |
|
||||
FLAGS_TX_ERROR_CHECK),
|
||||
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.mdio_ctrl = 0,
|
||||
|
@ -10776,7 +10764,8 @@ static struct bnx2x_phy phy_8726 = {
|
|||
.addr = 0xff,
|
||||
.def_md_devad = 0,
|
||||
.flags = (FLAGS_HW_LOCK_REQUIRED |
|
||||
FLAGS_INIT_XGXS_FIRST),
|
||||
FLAGS_INIT_XGXS_FIRST |
|
||||
FLAGS_TX_ERROR_CHECK),
|
||||
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.mdio_ctrl = 0,
|
||||
|
@ -10807,7 +10796,8 @@ static struct bnx2x_phy phy_8727 = {
|
|||
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
|
||||
.addr = 0xff,
|
||||
.def_md_devad = 0,
|
||||
.flags = FLAGS_FAN_FAILURE_DET_REQ,
|
||||
.flags = (FLAGS_FAN_FAILURE_DET_REQ |
|
||||
FLAGS_TX_ERROR_CHECK),
|
||||
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
|
||||
.mdio_ctrl = 0,
|
||||
|
@ -12194,10 +12184,6 @@ static void bnx2x_analyze_link_error(struct link_params *params,
|
|||
u8 led_mode;
|
||||
u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
|
||||
|
||||
/*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n",
|
||||
vars->link_up,
|
||||
half_open_conn, lss_status);*/
|
||||
|
||||
if ((lss_status ^ half_open_conn) == 0)
|
||||
return;
|
||||
|
||||
|
@ -12210,6 +12196,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
|
|||
* b. Update link_vars->link_up
|
||||
*/
|
||||
if (lss_status) {
|
||||
DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
|
||||
vars->link_status &= ~LINK_STATUS_LINK_UP;
|
||||
vars->link_up = 0;
|
||||
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
|
||||
|
@ -12219,6 +12206,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
|
|||
*/
|
||||
led_mode = LED_MODE_OFF;
|
||||
} else {
|
||||
DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
|
||||
vars->link_status |= LINK_STATUS_LINK_UP;
|
||||
vars->link_up = 1;
|
||||
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
|
||||
|
@ -12235,6 +12223,15 @@ static void bnx2x_analyze_link_error(struct link_params *params,
|
|||
bnx2x_notify_link_changed(bp);
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* Description:
|
||||
* This function checks for half opened connection change indication.
|
||||
* When such change occurs, it calls the bnx2x_analyze_link_error
|
||||
* to check if Remote Fault is set or cleared. Reception of remote fault
|
||||
* status message in the MAC indicates that the peer's MAC has detected
|
||||
* a fault, for example, due to break in the TX side of fiber.
|
||||
*
|
||||
******************************************************************************/
|
||||
static void bnx2x_check_half_open_conn(struct link_params *params,
|
||||
struct link_vars *vars)
|
||||
{
|
||||
|
@ -12245,9 +12242,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
|
|||
if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
|
||||
return;
|
||||
|
||||
if (!CHIP_IS_E3(bp) &&
|
||||
if (CHIP_IS_E3(bp) &&
|
||||
(REG_RD(bp, MISC_REG_RESET_REG_2) &
|
||||
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) {
|
||||
(MISC_REGISTERS_RESET_REG_2_XMAC))) {
|
||||
/* Check E3 XMAC */
|
||||
/*
|
||||
* Note that link speed cannot be queried here, since it may be
|
||||
* zero while link is down. In case UMAC is active, LSS will
|
||||
* simply not be set
|
||||
*/
|
||||
mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
|
||||
|
||||
/* Clear stick bits (Requires rising edge) */
|
||||
REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
|
||||
REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
|
||||
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
|
||||
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
|
||||
if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
|
||||
lss_status = 1;
|
||||
|
||||
bnx2x_analyze_link_error(params, vars, lss_status);
|
||||
} else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
|
||||
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
|
||||
/* Check E1X / E2 BMAC */
|
||||
u32 lss_status_reg;
|
||||
u32 wb_data[2];
|
||||
|
@ -12269,14 +12285,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
|
|||
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
|
||||
{
|
||||
struct bnx2x *bp = params->bp;
|
||||
u16 phy_idx;
|
||||
if (!params) {
|
||||
DP(NETIF_MSG_LINK, "Ininitliazed params !\n");
|
||||
DP(NETIF_MSG_LINK, "Uninitialized params !\n");
|
||||
return;
|
||||
}
|
||||
/* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x
|
||||
RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed,
|
||||
REG_RD(bp, MISC_REG_RESET_REG_2)); */
|
||||
bnx2x_check_half_open_conn(params, vars);
|
||||
|
||||
for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
|
||||
if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
|
||||
bnx2x_set_aer_mmd(params, ¶ms->phy[phy_idx]);
|
||||
bnx2x_check_half_open_conn(params, vars);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (CHIP_IS_E3(bp))
|
||||
bnx2x_check_over_curr(params, vars);
|
||||
}
|
||||
|
|
|
@ -145,6 +145,7 @@ struct bnx2x_phy {
|
|||
#define FLAGS_SFP_NOT_APPROVED (1<<7)
|
||||
#define FLAGS_MDC_MDIO_WA (1<<8)
|
||||
#define FLAGS_DUMMY_READ (1<<9)
|
||||
#define FLAGS_TX_ERROR_CHECK (1<<12)
|
||||
|
||||
/* preemphasis values for the rx side */
|
||||
u16 rx_preemphasis[4];
|
||||
|
@ -276,7 +277,6 @@ struct link_vars {
|
|||
#define PHY_PHYSICAL_LINK_FLAG (1<<2)
|
||||
#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
|
||||
#define PHY_OVER_CURRENT_FLAG (1<<4)
|
||||
#define PHY_TX_ERROR_CHECK_FLAG (1<<5)
|
||||
|
||||
u8 mac_type;
|
||||
#define MAC_TYPE_NONE 0
|
||||
|
|
Loading…
Reference in New Issue