hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

This commit is contained in:
David S. Miller 2016-01-13 00:21:27 -05:00
parent ccdf6ce6a8 67990608c8
commit ddb5388ffd
4014 changed files with 139508 additions and 51512 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
CREDITS
View File

@ -1507,6 +1507,14 @@ S: 312/107 Canberra Avenue
S: Griffith, ACT 2603
S: Australia
N: Andreas Herrmann
E: herrmann.der.user@gmail.com
E: herrmann.der.user@googlemail.com
D: Key developer of x86/AMD64
D: Author of AMD family 15h processor power monitoring driver
D: Maintainer of AMD Athlon 64 and Opteron processor frequency driver
S: Germany
N: Sebastian Hetze
E: she@lunetix.de
D: German Linux Documentation,

19
Documentation/ABI/testing/sysfs-class-net-cdc_ncm
View File

@ -19,6 +19,25 @@ Description:
Set to 0 to pad all frames. Set greater than tx_max to
disable all padding.
What: /sys/class/net/<iface>/cdc_ncm/ndp_to_end
Date: Dec 2015
KernelVersion: 4.5
Contact: Bjørn Mork <bjorn@mork.no>
Description:
Boolean attribute showing the status of the "NDP to
end" quirk. Defaults to 'N', except for devices
already known to need it enabled.
The "NDP to end" quirk makes the driver place the NDP
(the packet index table) after the payload. The NCM
specification does not mandate this, but some devices
are known to be more restrictive. Write 'Y' to this
attribute for temporary testing of a suspect device
failing to work with the default driver settings.
A device entry should be added to the driver if this
quirk is found to be required.
What: /sys/class/net/<iface>/cdc_ncm/rx_max
Date: May 2014
KernelVersion: 3.16

4
Documentation/ABI/testing/sysfs-class-net-mesh
View File

@ -8,7 +8,7 @@ Description:
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
Date: May 2011
Contact: Antonio Quartulli <antonio@meshcoding.com>
Contact: Antonio Quartulli <a@unstable.cc>
Description:
Indicates whether the data traffic going from a
wireless client to another wireless client will be
@ -70,7 +70,7 @@ Description:
What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
Date: Nov 2013
Contact: Antonio Quartulli <antonio@meshcoding.com>
Contact: Antonio Quartulli <a@unstable.cc>
Description:
Defines the isolation mark (and its bitmask) which
is used to classify clients as "isolated" by the

23
Documentation/ABI/testing/sysfs-class-net-qmi Normal file
View File

@ -0,0 +1,23 @@
What: /sys/class/net/<iface>/qmi/raw_ip
Date: Dec 2015
KernelVersion: 4.4
Contact: Bjørn Mork <bjorn@mork.no>
Description:
Boolean. Default: 'N'
Set this to 'Y' to change the network device link
framing from '802.3' to 'raw-ip'.
The netdev will change to reflect the link framing
mode. The netdev is an ordinary ethernet device in
'802.3' mode, and the driver expects to exchange
frames with an ethernet header over the USB link. The
netdev is a headerless p-t-p device in 'raw-ip' mode,
and the driver expects to echange IPv4 or IPv6 packets
without any L2 header over the USB link.
Userspace is in full control of firmware configuration
through the delegation of the QMI protocol. Userspace
is responsible for coordination of driver and firmware
link framing mode, changing this setting to 'Y' if the
firmware is configured for 'raw-ip' mode.

84
Documentation/DocBook/device-drivers.tmpl
View File

@ -238,78 +238,26 @@ X!Isound/sound_firmware.c
!Iinclude/media/videobuf2-memops.h
</sect1>
<sect1><title>Digital TV (DVB) devices</title>
!Idrivers/media/dvb-core/dvb_ca_en50221.h
!Idrivers/media/dvb-core/dvb_frontend.h
<sect1><title>Digital TV Common functions</title>
!Idrivers/media/dvb-core/dvb_math.h
!Idrivers/media/dvb-core/dvb_ringbuffer.h
!Idrivers/media/dvb-core/dvbdev.h
<sect1><title>Digital TV Demux API</title>
<para>The kernel demux API defines a driver-internal interface for
registering low-level, hardware specific driver to a hardware
independent demux layer. It is only of interest for Digital TV
device driver writers. The header file for this API is named
<constant>demux.h</constant> and located in
<constant>drivers/media/dvb-core</constant>.</para>
<para>The demux API should be implemented for each demux in the
system. It is used to select the TS source of a demux and to manage
the demux resources. When the demux client allocates a resource via
the demux API, it receives a pointer to the API of that
resource.</para>
<para>Each demux receives its TS input from a DVB front-end or from
memory, as set via this demux API. In a system with more than one
front-end, the API can be used to select one of the DVB front-ends
as a TS source for a demux, unless this is fixed in the HW platform.
The demux API only controls front-ends regarding to their connections
with demuxes; the APIs used to set the other front-end parameters,
such as tuning, are not defined in this document.</para>
<para>The functions that implement the abstract interface demux should
be defined static or module private and registered to the Demux
core for external access. It is not necessary to implement every
function in the struct <constant>dmx_demux</constant>. For example,
a demux interface might support Section filtering, but not PES
filtering. The API client is expected to check the value of any
function pointer before calling the function: the value of NULL means
that the &#8220;function is not available&#8221;.</para>
<para>Whenever the functions of the demux API modify shared data,
the possibilities of lost update and race condition problems should
be addressed, e.g. by protecting parts of code with mutexes.</para>
<para>Note that functions called from a bottom half context must not
sleep. Even a simple memory allocation without using GFP_ATOMIC can
result in a kernel thread being put to sleep if swapping is needed.
For example, the Linux kernel calls the functions of a network device
interface from a bottom half context. Thus, if a demux API function
is called from network device code, the function must not sleep.
</para>
</sect1>
<section id="demux_callback_api">
<title>Demux Callback API</title>
<para>This kernel-space API comprises the callback functions that
deliver filtered data to the demux client. Unlike the other DVB
kABIs, these functions are provided by the client and called from
the demux code.</para>
<para>The function pointers of this abstract interface are not
packed into a structure as in the other demux APIs, because the
callback functions are registered and used independent of each
other. As an example, it is possible for the API client to provide
several callback functions for receiving TS packets and no
callbacks for PES packets or sections.</para>
<para>The functions that implement the callback API need not be
re-entrant: when a demux driver calls one of these functions,
the driver is not allowed to call the function again before
the original call returns. If a callback is triggered by a
hardware interrupt, it is recommended to use the Linux
&#8220;bottom half&#8221; mechanism or start a tasklet instead of
making the callback function call directly from a hardware
interrupt.</para>
<para>This mechanism is implemented by
<link linkend='API-dmx-ts-cb'>dmx_ts_cb()</link> and
<link linkend='API-dmx-section-cb'>dmx_section_cb()</link>.</para>
</section>
</sect1>
<sect1><title>Digital TV Frontend kABI</title>
!Pdrivers/media/dvb-core/dvb_frontend.h Digital TV Frontend
!Idrivers/media/dvb-core/dvb_frontend.h
</sect1>
<sect1><title>Digital TV Demux kABI</title>
!Pdrivers/media/dvb-core/demux.h Digital TV Demux
<sect1><title>Demux Callback API</title>
!Pdrivers/media/dvb-core/demux.h Demux Callback
</sect1>
!Idrivers/media/dvb-core/demux.h
</sect1>
</sect1>
<sect1><title>Digital TV Conditional Access kABI</title>
!Idrivers/media/dvb-core/dvb_ca_en50221.h
</sect1>
</sect1>
<sect1><title>Remote Controller devices</title>
!Iinclude/media/rc-core.h
!Iinclude/media/lirc_dev.h

6
Documentation/DocBook/media/Makefile
View File

@ -199,8 +199,10 @@ DVB_DOCUMENTED = \
#
install_media_images = \
$(Q)-mkdir $(MEDIA_OBJ_DIR)/media_api; \
cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/*.svg $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
$(Q)if [ "x$(findstring media_api.xml,$(DOCBOOKS))" != "x" ]; then \
mkdir -p $(MEDIA_OBJ_DIR)/media_api; \
cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/*.svg $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api; \
fi
$(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
$(Q)base64 -d $< >$@

2
Documentation/DocBook/media/dvb/dvbproperty.xml
View File

@ -76,7 +76,7 @@ int main(void)
<para>NOTE: While it is possible to directly call the Kernel code like the
above example, it is strongly recommended to use
<ulink url="http://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>,
<ulink url="https://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>,
as it provides abstraction to work with the supported digital TV standards
and provides methods for usual operations like program scanning and to
read/write channel descriptor files.</para>

2
Documentation/DocBook/media/dvb/examples.xml
View File

@ -3,7 +3,7 @@
</para>
<para>NOTE: This section is out of date, and the code below won't even
compile. Please refer to the
<ulink url="http://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>
<ulink url="https://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>
for updated/recommended examples.
</para>

2
Documentation/DocBook/media/dvb/intro.xml
View File

@ -32,7 +32,7 @@ and filtering several section and PES data streams at the same time.
new standard Linux DVB API. As a commitment to the development of
terminals based on open standards, Nokia and Convergence made it
available to all Linux developers and published it on
<ulink url="http://www.linuxtv.org/" /> in September 2000.
<ulink url="https://linuxtv.org" /> in September 2000.
Convergence is the maintainer of the Linux DVB API. Together with the
LinuxTV community (i.e. you, the reader of this document), the Linux DVB
API will be constantly reviewed and improved. With the Linux driver for

2
Documentation/DocBook/media/v4l/capture.c.xml
View File

@ -5,7 +5,7 @@
* This program can be used and distributed without restrictions.
*
* This program is provided with the V4L2 API
* see http://linuxtv.org/docs.php for more information
* see https://linuxtv.org/docs.php for more information
*/
#include &lt;stdio.h&gt;

2
Documentation/DocBook/media/v4l/compat.xml
View File

@ -2666,7 +2666,7 @@ is useful to display images captured with V4L2 devices.</para>
<para>V4L2 does not support digital terrestrial, cable or
satellite broadcast. A separate project aiming at digital receivers
exists. You can find its homepage at <ulink
url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API
url="https://linuxtv.org">https://linuxtv.org</ulink>. The Linux DVB API
has no connection to the V4L2 API except that drivers for hybrid
hardware may support both.</para>
</section>

10
Documentation/DocBook/media/v4l/io.xml
View File

@ -699,7 +699,7 @@ linkend="v4l2-buf-type" /></entry>
buffer. It depends on the negotiated data format and may change with
each buffer for compressed variable size data like JPEG images.
Drivers must set this field when <structfield>type</structfield>
refers to an input stream, applications when it refers to an output stream.
refers to a capture stream, applications when it refers to an output stream.
If the application sets this to 0 for an output stream, then
<structfield>bytesused</structfield> will be set to the size of the
buffer (see the <structfield>length</structfield> field of this struct) by
@ -720,14 +720,14 @@ linkend="buffer-flags" />.</entry>
<entry>Indicates the field order of the image in the
buffer, see <xref linkend="v4l2-field" />. This field is not used when
the buffer contains VBI data. Drivers must set it when
<structfield>type</structfield> refers to an input stream,
<structfield>type</structfield> refers to a capture stream,
applications when it refers to an output stream.</entry>
</row>
<row>
<entry>struct timeval</entry>
<entry><structfield>timestamp</structfield></entry>
<entry></entry>
<entry><para>For input streams this is time when the first data
<entry><para>For capture streams this is time when the first data
byte was captured, as returned by the
<function>clock_gettime()</function> function for the relevant
clock id; see <constant>V4L2_BUF_FLAG_TIMESTAMP_*</constant> in
@ -866,7 +866,7 @@ must set this to 0.</entry>
<entry></entry>
<entry>The number of bytes occupied by data in the plane
(its payload). Drivers must set this field when <structfield>type</structfield>
refers to an input stream, applications when it refers to an output stream.
refers to a capture stream, applications when it refers to an output stream.
If the application sets this to 0 for an output stream, then
<structfield>bytesused</structfield> will be set to the size of the
plane (see the <structfield>length</structfield> field of this struct)
@ -919,7 +919,7 @@ must set this to 0.</entry>
<entry></entry>
<entry>Offset in bytes to video data in the plane.
Drivers must set this field when <structfield>type</structfield>
refers to an input stream, applications when it refers to an output stream.
refers to a capture stream, applications when it refers to an output stream.
Note that data_offset is included in <structfield>bytesused</structfield>.
So the size of the image in the plane is
<structfield>bytesused</structfield>-<structfield>data_offset</structfield> at

10
Documentation/DocBook/media/v4l/v4l2.xml
View File

@ -151,6 +151,16 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab,
structs, ioctls) must be noted in more detail in the history chapter
(compat.xml), along with the possible impact on existing drivers and
applications. -->
<revision>
<revnumber>4.5</revnumber>
<date>2015-10-29</date>
<authorinitials>rr</authorinitials>
<revremark>Extend vidioc-g-ext-ctrls;. Replace ctrl_class with a new
union with ctrl_class and which. Which is used to select the current value of
the control or the default value.
</revremark>
</revision>
<revision>
<revnumber>4.4</revnumber>
<date>2015-05-26</date>

30
Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
View File

@ -58,7 +58,7 @@
<para>This ioctl is used to create buffers for <link linkend="mmap">memory
mapped</link> or <link linkend="userp">user pointer</link> or <link
linkend="dmabuf">DMA buffer</link> I/O. It can be used as an alternative or in
addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
addition to the &VIDIOC-REQBUFS; ioctl, when a tighter
control over buffers is required. This ioctl can be called multiple times to
create buffers of different sizes.</para>
@ -71,30 +71,28 @@ zeroed.</para>
<para>The <structfield>format</structfield> field specifies the image format
that the buffers must be able to handle. The application has to fill in this
&v4l2-format;. Usually this will be done using the
<constant>VIDIOC_TRY_FMT</constant> or <constant>VIDIOC_G_FMT</constant> ioctl()
to ensure that the requested format is supported by the driver. Unsupported
formats will result in an error.</para>
&v4l2-format;. Usually this will be done using the &VIDIOC-TRY-FMT; or &VIDIOC-G-FMT; ioctls
to ensure that the requested format is supported by the driver.
Based on the format's <structfield>type</structfield> field the requested buffer
size (for single-planar) or plane sizes (for multi-planar formats) will be
used for the allocated buffers. The driver may return an error if the size(s)
are not supported by the hardware (usually because they are too small).</para>
<para>The buffers created by this ioctl will have as minimum size the size
defined by the <structfield>format.pix.sizeimage</structfield> field. If the
defined by the <structfield>format.pix.sizeimage</structfield> field (or the
corresponding fields for other format types). Usually if the
<structfield>format.pix.sizeimage</structfield> field is less than the minimum
required for the given format, then <structfield>sizeimage</structfield> will be
increased by the driver to that minimum to allocate the buffers. If it is
larger, then the value will be used as-is. The same applies to the
<structfield>sizeimage</structfield> field of the
<structname>v4l2_plane_pix_format</structname> structure in the case of
multiplanar formats.</para>
required for the given format, then an error will be returned since drivers will
typically not allow this. If it is larger, then the value will be used as-is.
In other words, the driver may reject the requested size, but if it is accepted
the driver will use it unchanged.</para>
<para>When the ioctl is called with a pointer to this structure the driver
will attempt to allocate up to the requested number of buffers and store the
actual number allocated and the starting index in the
<structfield>count</structfield> and the <structfield>index</structfield> fields
respectively. On return <structfield>count</structfield> can be smaller than
the number requested. The driver may also increase buffer sizes if required,
however, it will not update <structfield>sizeimage</structfield> field values.
The user has to use <constant>VIDIOC_QUERYBUF</constant> to retrieve that
information.</para>
the number requested.</para>
<table pgwide="1" frame="none" id="v4l2-create-buffers">
<title>struct <structname>v4l2_create_buffers</structname></title>

2
Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml
View File

@ -99,7 +99,7 @@ if the driver supports writing registers to the device.</para>
<para>We recommended the <application>v4l2-dbg</application>
utility over calling this ioctl directly. It is available from the
LinuxTV v4l-dvb repository; see <ulink
url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
url="https://linuxtv.org/repo/">https://linuxtv.org/repo/</ulink> for
access instructions.</para>
<!-- Note for convenience vidioc-dbg-g-register.sgml

2
Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
View File

@ -117,7 +117,7 @@ However when a driver supports these ioctls it must also support
<para>We recommended the <application>v4l2-dbg</application>
utility over calling these ioctls directly. It is available from the
LinuxTV v4l-dvb repository; see <ulink
url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
url="https://linuxtv.org/repo/">https://linuxtv.org/repo/</ulink> for
access instructions.</para>
<!-- Note for convenience vidioc-dbg-g-chip-info.sgml

2
Documentation/DocBook/media/v4l/vidioc-enumstd.xml
View File

@ -198,7 +198,7 @@ video4linux-list@redhat.com on 17 Oct 2002
<constant>V4L2_STD_ATSC_16_VSB</constant> are U.S. terrestrial digital
TV standards. Presently the V4L2 API does not support digital TV. See
also the Linux DVB API at <ulink
url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
url="https://linuxtv.org">https://linuxtv.org</ulink>.</para>
<para><programlisting>
#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
V4L2_STD_PAL_B1 |\

28
Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
View File

@ -61,7 +61,7 @@ must belong to the same control class.</para>
<para>Applications must always fill in the
<structfield>count</structfield>,
<structfield>ctrl_class</structfield>,
<structfield>which</structfield>,
<structfield>controls</structfield> and
<structfield>reserved</structfield> fields of &v4l2-ext-controls;, and
initialize the &v4l2-ext-control; array pointed to by the
@ -109,7 +109,7 @@ the driver whether wrong values are automatically adjusted to a valid
value or if an error is returned.</para>
<para>When the <structfield>id</structfield> or
<structfield>ctrl_class</structfield> is invalid drivers return an
<structfield>which</structfield> is invalid drivers return an
&EINVAL;. When the value is out of bounds drivers can choose to take
the closest valid value or return an &ERANGE;, whatever seems more
appropriate. In the first case the new value is set in
@ -223,7 +223,12 @@ Valid if <constant>V4L2_CTRL_FLAG_HAS_PAYLOAD</constant> is set for this control
<tgroup cols="3">
&cs-str;
<tbody valign="top">
<row>
<entry>union</entry>
<entry>(anonymous)</entry>
</row>
<row>
<entry></entry>
<entry>__u32</entry>
<entry><structfield>ctrl_class</structfield></entry>
<entry>The control class to which all controls belong, see
@ -233,6 +238,23 @@ belong to any control class. Whether drivers support this can be tested by setti
<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant>
with a <structfield>count</structfield> of 0. If that succeeds, then the driver
supports this feature.</entry>
</row>
<row>
<entry></entry>
<entry>__u32</entry>
<entry><structfield>which</structfield></entry>
<entry><para>Which value of the control to get/set/try. <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>
will return the current value of the control and <constant>V4L2_CTRL_WHICH_DEF_VAL</constant> will
return the default value of the control. Please note that you can only get the default value of the
control, you cannot set or try it.</para>
<para>For backwards compatibility you can also use a control class here (see
<xref linkend="ctrl-class" />). In that case all controls have to belong to that
control class. This usage is deprecated, instead just use <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>.
There are some very old drivers that do not yet support <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>
and that require a control class here. You can test for such drivers by setting ctrl_class to
<constant>V4L2_CTRL_WHICH_CUR_VAL</constant> and calling VIDIOC_TRY_EXT_CTRLS with a count of 0.
If that fails, then the driver does not support <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>.</para>
</entry>
</row>
<row>
<entry>__u32</entry>
@ -390,7 +412,7 @@ These controls are described in <xref linkend="rf-tuner-controls" />.</entry>
<listitem>
<para>The &v4l2-ext-control; <structfield>id</structfield>
is invalid, the &v4l2-ext-controls;
<structfield>ctrl_class</structfield> is invalid, or the &v4l2-ext-control;
<structfield>which</structfield> is invalid, or the &v4l2-ext-control;
<structfield>value</structfield> was inappropriate (e.g. the given menu
index is not supported by the driver). This error code is
also returned by the <constant>VIDIOC_S_EXT_CTRLS</constant> and

6
Documentation/DocBook/media_api.tmpl
View File

@ -19,10 +19,10 @@
<!ENTITY cs-def "<colspec colname='c1' colwidth='3*' /><colspec colname='c2' colwidth='1*' /><colspec colname='c3' colwidth='4*' /><spanspec spanname='hspan' namest='c1' nameend='c3' />">
<!-- Video for Linux mailing list address. -->
<!ENTITY v4l-ml "<ulink url='http://www.linuxtv.org/lists.php'>http://www.linuxtv.org/lists.php</ulink>">
<!ENTITY v4l-ml "<ulink url='https://linuxtv.org/lists.php'>https://linuxtv.org/lists.php</ulink>">
<!-- LinuxTV v4l-dvb repository. -->
<!ENTITY v4l-dvb "<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
<!ENTITY v4l-dvb "<ulink url='https://linuxtv.org/repo/'>https://linuxtv.org/repo/</ulink>">
<!ENTITY dash-ent-8 "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
<!ENTITY dash-ent-10 "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
<!ENTITY dash-ent-12 "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
@ -91,7 +91,7 @@
components, like mixers, PCM capture, PCM playback, etc, which
are controlled via ALSA API.</para>
<para>For additional information and for the latest development code,
see: <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
see: <ulink url="https://linuxtv.org">https://linuxtv.org</ulink>.</para>
<para>For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: <ulink url="http://vger.kernel.org/vger-lists.html#linux-media">Linux Media Mailing List (LMML).</ulink>.</para>
</preface>

BIN
Documentation/RCU/Design/Requirements/2013-08-is-it-dead.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 98 KiB

374
Documentation/RCU/Design/Requirements/GPpartitionReaders1.svg Normal file
View File

@ -0,0 +1,374 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:cc="http://creativecommons.org/ns#"
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
width="447.99197"
height="428.19299"
id="svg2"
version="1.1"
inkscape:version="0.48.3.1 r9886"
sodipodi:docname="GPpartitionReaders1.svg">
<defs
id="defs4">
<marker
inkscape:stockid="Arrow2Lend"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lend"
style="overflow:visible">
<path
id="path3792"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
inkscape:connector-curvature="0" />
</marker>
<marker
inkscape:stockid="Arrow2Lstart"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lstart"
style="overflow:visible">
<path
id="path3789"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(1.1,0,0,1.1,1.1,0)"
inkscape:connector-curvature="0" />
</marker>
</defs>
<sodipodi:namedview
id="base"
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1.0"
inkscape:pageopacity="0.0"
inkscape:pageshadow="2"
inkscape:zoom="1.6184291"
inkscape:cx="223.99599"
inkscape:cy="214.0965"
inkscape:document-units="px"
inkscape:current-layer="layer1"
showgrid="false"
inkscape:window-width="979"
inkscape:window-height="836"
inkscape:window-x="571"
inkscape:window-y="335"
inkscape:window-maximized="0"
fit-margin-top="5"
fit-margin-left="5"
fit-margin-right="5"
fit-margin-bottom="5" />
<metadata
id="metadata7">
<rdf:RDF>
<cc:Work
rdf:about="">
<dc:format>image/svg+xml</dc:format>
<dc:type
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
<dc:title></dc:title>
</cc:Work>
</rdf:RDF>
</metadata>
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1"
transform="translate(-28.441125,-185.60612)">
<flowRoot
xml:space="preserve"
id="flowRoot2985"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
id="flowRegion2987"><rect
id="rect2989"
width="82.85714"
height="11.428572"
x="240"
y="492.36218" /></flowRegion><flowPara
id="flowPara2991"></flowPara></flowRoot> <g
id="g4433"
transform="translate(2,0)">
<text
sodipodi:linespacing="125%"
id="text2993"
y="-261.66608"
x="412.12299"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
xml:space="preserve"
transform="matrix(0,1,-1,0,0,0)"><tspan
y="-261.66608"
x="412.12299"
id="tspan2995"
sodipodi:role="line">synchronize_rcu()</tspan></text>
<g
id="g4417"
transform="matrix(0,1,-1,0,730.90257,222.4928)">
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Lstart);marker-end:url(#Arrow2Lend)"
d="m 97.580736,477.4048 183.140664,0"
id="path2997"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 96.752718,465.38398 0,22.62742"
id="path4397"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 281.54942,465.38397 0,22.62742"
id="path4397-5"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
</g>
</g>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.04738"
y="268.18076"
id="text4429"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431"
x="112.04738"
y="268.18076">WRITE_ONCE(a, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.04738"
y="439.13766"
id="text4441"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4443"
x="112.04738"
y="439.13766">WRITE_ONCE(b, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="255.60869"
y="309.29346"
id="text4445"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4447"
x="255.60869"
y="309.29346">r1 = READ_ONCE(a);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="255.14423"
y="520.61786"
id="text4449"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4451"
x="255.14423"
y="520.61786">WRITE_ONCE(c, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="384.71124"
id="text4453"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4455"
x="396.10254"
y="384.71124">r2 = READ_ONCE(b);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="582.13617"
id="text4457"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4459"
x="396.10254"
y="582.13617">r3 = READ_ONCE(c);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.08231"
y="213.91006"
id="text4461"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463"
x="112.08231"
y="213.91006">thread0()</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="252.34512"
y="213.91006"
id="text4461-6"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-0"
x="252.34512"
y="213.91006">thread1()</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.42557"
y="213.91006"
id="text4461-2"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-2"
x="396.42557"
y="213.91006">thread2()</tspan></text>
<rect
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="rect4495"
width="436.28488"
height="416.4859"
x="34.648232"
y="191.10612" />
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 183.14066,191.10612 0,417.193 -0.70711,0"
id="path4497"
inkscape:connector-curvature="0" />
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 325.13867,191.10612 0,417.193 -0.70711,0"
id="path4497-5"
inkscape:connector-curvature="0" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="111.75929"
y="251.53981"
id="text4429-8"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9"
x="111.75929"
y="251.53981">rcu_read_lock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="367.91556"
id="text4429-8-9"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4"
x="396.10254"
y="367.91556">rcu_read_lock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="597.40289"
id="text4429-8-9-3"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-4"
x="396.10254"
y="597.40289">rcu_read_unlock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="111.75929"
y="453.15311"
id="text4429-8-9-3-1"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-4-6"
x="111.75929"
y="453.15311">rcu_read_unlock();</tspan></text>
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 33.941125,227.87568 436.284885,0 0,0.7071"
id="path4608"
inkscape:connector-curvature="0" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="394.94427"
y="345.66351"
id="text4648"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650"
x="394.94427"
y="345.66351">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(36.441125,199.60612)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.11968"
y="475.77856"
id="text4648-4"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-4"
x="112.11968"
y="475.77856">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-7"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(-246.38346,329.72117)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<path
sodipodi:type="arc"
style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-7-7"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(-103.65246,202.90878)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="254.85066"
y="348.96619"
id="text4648-4-3"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-4-5"
x="254.85066"
y="348.96619">QS</tspan></text>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 17 KiB

237
Documentation/RCU/Design/Requirements/RCUApplicability.svg Normal file
View File

@ -0,0 +1,237 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Creator: fig2dev Version 3.2 Patchlevel 5d -->
<!-- CreationDate: Tue Mar 4 18:34:25 2014 -->
<!-- Magnification: 3.000 -->
<svg
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:cc="http://creativecommons.org/ns#"
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
width="1089.1382"
height="668.21368"
viewBox="-2121 -36 14554.634 8876.4061"
id="svg2"
version="1.1"
inkscape:version="0.48.3.1 r9886"
sodipodi:docname="RCUApplicability.svg">
<metadata
id="metadata40">
<rdf:RDF>
<cc:Work
rdf:about="">
<dc:format>image/svg+xml</dc:format>
<dc:type
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
<dc:title />
</cc:Work>
</rdf:RDF>
</metadata>
<defs
id="defs38" />
<sodipodi:namedview
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1"
objecttolerance="10"
gridtolerance="10"
guidetolerance="10"
inkscape:pageopacity="0"
inkscape:pageshadow="2"
inkscape:window-width="849"
inkscape:window-height="639"
id="namedview36"
showgrid="false"
inkscape:zoom="0.51326165"
inkscape:cx="544.56912"
inkscape:cy="334.10686"
inkscape:window-x="149"
inkscape:window-y="448"
inkscape:window-maximized="0"
inkscape:current-layer="g4"
fit-margin-top="5"
fit-margin-left="5"
fit-margin-right="5"
fit-margin-bottom="5" />
<g
style="fill:none;stroke-width:0.025in"
id="g4"
transform="translate(-2043.6828,14.791398)">
<!-- Line: box -->
<rect
x="0"
y="0"
width="14400"
height="8775"
rx="0"
style="fill:#ffa1a1;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter"
id="rect6" />
<!-- Line: box -->
<rect
x="1350"
y="0"
width="11700"
height="6075"
rx="0"
style="fill:#ffff00;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter"
id="rect8" />
<!-- Line: box -->
<rect
x="2700"
y="0"
width="9000"
height="4275"
rx="0"
style="fill:#00ff00;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter"
id="rect10" />
<!-- Line: box -->
<rect
x="4050"
y="0"
width="6300"
height="2475"
rx="0"
style="fill:#87cfff;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter"
id="rect12" />
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="900"
font-style="normal"
font-weight="normal"
font-size="324"
id="text14"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3017">Read-Mostly, Stale &amp;</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="1350"
font-style="normal"
font-weight="normal"
font-size="324"
id="text16"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3019">Inconsistent Data OK</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="1800"
font-style="normal"
font-weight="normal"
font-size="324"
id="text18"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3021">(RCU Works Great!!!)</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="3825"
font-style="normal"
font-weight="normal"
font-size="324"
id="text20"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3023">(RCU Works Well)</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="3375"
font-style="normal"
font-weight="normal"
font-size="324"
id="text22"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3025">Read-Mostly, Need Consistent Data</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="5175"
font-style="normal"
font-weight="normal"
font-size="324"
id="text24"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3027">Read-Write, Need Consistent Data</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="6975"
font-style="normal"
font-weight="normal"
font-size="324"
id="text26"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
sodipodi:linespacing="125%">Update-Mostly, Need Consistent Data</text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="5625"
font-style="normal"
font-weight="normal"
font-size="324"
id="text28"
sodipodi:linespacing="125%"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
id="tspan3029">(RCU Might Be OK...)</tspan></text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="7875"
font-style="normal"
font-weight="normal"
font-size="324"
id="text30"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
sodipodi:linespacing="125%">(1) Provide Existence Guarantees For Update-Friendly Mechanisms</text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="8325"
font-style="normal"
font-weight="normal"
font-size="324"
id="text32"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
sodipodi:linespacing="125%">(2) Provide Wait-Free Read-Side Primitives for Real-Time Use)</text>
<!-- Text -->
<text
xml:space="preserve"
x="7200"
y="7425"
font-style="normal"
font-weight="normal"
font-size="324"
id="text34"
style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"
sodipodi:linespacing="125%">(RCU is Very Unlikely to be the Right Tool For The Job, But it Can:</text>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 10 KiB

639
Documentation/RCU/Design/Requirements/ReadersPartitionGP1.svg Normal file
View File

@ -0,0 +1,639 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:cc="http://creativecommons.org/ns#"
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
width="735.25"
height="516.21875"
id="svg2"
version="1.1"
inkscape:version="0.48.3.1 r9886"
sodipodi:docname="ReadersPartitionGP1.svg">
<defs
id="defs4">
<marker
inkscape:stockid="Arrow2Lend"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lend"
style="overflow:visible">
<path
id="path3792"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
inkscape:connector-curvature="0" />
</marker>
<marker
inkscape:stockid="Arrow2Lstart"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lstart"
style="overflow:visible">
<path
id="path3789"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(1.1,0,0,1.1,1.1,0)"
inkscape:connector-curvature="0" />
</marker>
<marker
inkscape:stockid="Arrow2Lstart"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lstart-4"
style="overflow:visible">
<path
id="path3789-9"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(1.1,0,0,1.1,1.1,0)"
inkscape:connector-curvature="0" />
</marker>
<marker
inkscape:stockid="Arrow2Lend"
orient="auto"
refY="0"
refX="0"
id="Arrow2Lend-4"
style="overflow:visible">
<path
id="path3792-4"
style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
transform="matrix(-1.1,0,0,-1.1,-1.1,0)"
inkscape:connector-curvature="0" />
</marker>
</defs>
<sodipodi:namedview
id="base"
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1.0"
inkscape:pageopacity="0.0"
inkscape:pageshadow="2"
inkscape:zoom="1.3670394"
inkscape:cx="367.26465"
inkscape:cy="258.46182"
inkscape:document-units="px"
inkscape:current-layer="g4433-6"
showgrid="false"
inkscape:window-width="1351"
inkscape:window-height="836"
inkscape:window-x="438"
inkscape:window-y="335"
inkscape:window-maximized="0"
fit-margin-top="5"
fit-margin-left="5"
fit-margin-right="5"
fit-margin-bottom="5" />
<metadata
id="metadata7">
<rdf:RDF>
<cc:Work
rdf:about="">
<dc:format>image/svg+xml</dc:format>
<dc:type
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
<dc:title />
</cc:Work>
</rdf:RDF>
</metadata>
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1"
transform="translate(-29.15625,-185.59375)">
<flowRoot
xml:space="preserve"
id="flowRoot2985"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
id="flowRegion2987"><rect
id="rect2989"
width="82.85714"
height="11.428572"
x="240"
y="492.36218" /></flowRegion><flowPara
id="flowPara2991" /></flowRoot> <g
id="g4433"
transform="translate(2,-12)">
<text
sodipodi:linespacing="125%"
id="text2993"
y="-261.66608"
x="436.12299"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
xml:space="preserve"
transform="matrix(0,1,-1,0,0,0)"><tspan
y="-261.66608"
x="436.12299"
id="tspan2995"
sodipodi:role="line">synchronize_rcu()</tspan></text>
<g
id="g4417"
transform="matrix(0,1,-1,0,730.90257,222.4928)">
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Lstart);marker-end:url(#Arrow2Lend)"
d="M 97.580736,477.4048 327.57913,476.09759"
id="path2997"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 96.752718,465.38398 0,22.62742"
id="path4397"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 328.40703,465.38397 0,22.62742"
id="path4397-5"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
</g>
</g>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.04738"
y="268.18076"
id="text4429"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431"
x="112.04738"
y="268.18076">WRITE_ONCE(a, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.04738"
y="487.13766"
id="text4441"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4443"
x="112.04738"
y="487.13766">WRITE_ONCE(b, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="255.60869"
y="297.29346"
id="text4445"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4447"
x="255.60869"
y="297.29346">r1 = READ_ONCE(a);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="255.14423"
y="554.61786"
id="text4449"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4451"
x="255.14423"
y="554.61786">WRITE_ONCE(c, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="370.71124"
id="text4453"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4455"
x="396.10254"
y="370.71124">WRITE_ONCE(d, 1);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="572.13617"
id="text4457"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4459"
x="396.10254"
y="572.13617">r2 = READ_ONCE(c);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.08231"
y="213.91006"
id="text4461"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463"
x="112.08231"
y="213.91006">thread0()</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="252.34512"
y="213.91006"
id="text4461-6"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-0"
x="252.34512"
y="213.91006">thread1()</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.42557"
y="213.91006"
id="text4461-2"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-2"
x="396.42557"
y="213.91006">thread2()</tspan></text>
<rect
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="rect4495"
width="724.25244"
height="505.21201"
x="34.648232"
y="191.10612" />
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 183.14066,191.10612 0,504.24243"
id="path4497"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 325.13867,191.10612 0,504.24243"
id="path4497-5"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="111.75929"
y="251.53981"
id="text4429-8"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9"
x="111.75929"
y="251.53981">rcu_read_lock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="353.91556"
id="text4429-8-9"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4"
x="396.10254"
y="353.91556">rcu_read_lock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="396.10254"
y="587.40289"
id="text4429-8-9-3"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-4"
x="396.10254"
y="587.40289">rcu_read_unlock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="111.75929"
y="501.15311"
id="text4429-8-9-3-1"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-4-6"
x="111.75929"
y="501.15311">rcu_read_unlock();</tspan></text>
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 33.941125,227.87568 724.941765,0"
id="path4608"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="394.94427"
y="331.66351"
id="text4648"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650"
x="394.94427"
y="331.66351">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(36.441125,185.60612)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="112.11968"
y="523.77856"
id="text4648-4"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-4"
x="112.11968"
y="523.77856">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-7"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(-246.38346,377.72117)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<path
sodipodi:type="arc"
style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-7-7"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(-103.65246,190.90878)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="254.85066"
y="336.96619"
id="text4648-4-3"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-4-5"
x="254.85066"
y="336.96619">QS</tspan></text>
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 470.93311,190.39903 0,504.24243"
id="path4497-5-6"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
d="m 616.22755,190.38323 0,504.24243"
id="path4497-5-2"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<g
id="g4433-6"
transform="translate(288.0964,78.32827)">
<text
sodipodi:linespacing="125%"
id="text2993-7"
y="-261.66608"
x="440.12299"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
xml:space="preserve"
transform="matrix(0,1,-1,0,0,0)"><tspan
y="-261.66608"
x="440.12299"
id="tspan2995-1"
sodipodi:role="line">synchronize_rcu()</tspan></text>
<g
id="g4417-1"
transform="matrix(0,1,-1,0,730.90257,222.4928)">
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Lstart);marker-end:url(#Arrow2Lend)"
d="M 97.580736,477.4048 328.5624,477.07246"
id="path2997-2"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 96.752718,465.38398 0,22.62742"
id="path4397-3"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
<path
style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 329.39039,465.38397 0,22.62742"
id="path4397-5-4"
inkscape:connector-curvature="0"
sodipodi:nodetypes="cc" />
</g>
</g>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="541.70508"
y="387.6217"
id="text4445-0"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4447-5"
x="541.70508"
y="387.6217">r3 = READ_ONCE(d);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="541.2406"
y="646.94611"
id="text4449-6"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4451-6"
x="541.2406"
y="646.94611">WRITE_ONCE(e, 1);</tspan></text>
<path
sodipodi:type="arc"
style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-7-7-5"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(182.44393,281.23704)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="540.94702"
y="427.29443"
id="text4648-4-3-1"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-4-5-7"
x="540.94702"
y="427.29443">QS</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="686.27747"
y="461.83929"
id="text4453-7"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4455-1"
x="686.27747"
y="461.83929">r4 = READ_ONCE(b);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="686.27747"
y="669.26422"
id="text4457-9"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4459-2"
x="686.27747"
y="669.26422">r5 = READ_ONCE(e);</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="686.27747"
y="445.04358"
id="text4429-8-9-33"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-2"
x="686.27747"
y="445.04358">rcu_read_lock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="686.27747"
y="684.53094"
id="text4429-8-9-3-8"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4431-9-4-4-5"
x="686.27747"
y="684.53094">rcu_read_unlock();</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="685.11914"
y="422.79153"
id="text4648-9"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-7"
x="685.11914"
y="422.79153">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-8"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(326.61602,276.73415)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="397.85934"
y="609.59003"
id="text4648-5"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-77"
x="397.85934"
y="609.59003">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-80"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(39.356201,463.53264)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="256.75986"
y="586.99133"
id="text4648-5-2"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4650-77-7"
x="256.75986"
y="586.99133">QS</tspan></text>
<path
sodipodi:type="arc"
style="fill:none;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
id="path4652-80-5"
sodipodi:cx="358.85669"
sodipodi:cy="142.87541"
sodipodi:rx="10.960155"
sodipodi:ry="10.253048"
d="m 358.86939,132.62237 a 10.960155,10.253048 0 1 1 -0.0228,0"
transform="translate(-101.74328,440.93395)"
sodipodi:start="4.7135481"
sodipodi:end="10.994651"
sodipodi:open="true" />
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="546.22791"
y="213.91006"
id="text4461-2-5"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-2-6"
x="546.22791"
y="213.91006">thread3()</tspan></text>
<text
xml:space="preserve"
style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
x="684.00067"
y="213.91006"
id="text4461-2-1"
sodipodi:linespacing="125%"><tspan
sodipodi:role="line"
id="tspan4463-2-0"
x="684.00067"
y="213.91006">thread4()</tspan></text>
</g>
</svg>
Side by Side

After

Width:  |  Height:  |  Size: 29 KiB

2897
Documentation/RCU/Design/Requirements/Requirements.html Normal file
View File

File diff suppressed because it is too large Load Diff

2741
Documentation/RCU/Design/Requirements/Requirements.htmlx Normal file
View File

File diff suppressed because it is too large Load Diff

108
Documentation/RCU/Design/htmlqqz.sh Executable file
View File

@ -0,0 +1,108 @@
#!/bin/sh
#
# Usage: sh htmlqqz.sh file
#
# Extracts and converts quick quizzes in a proto-HTML document file.htmlx.
# Commands, all of which must be on a line by themselves:
#
# "<p>@@QQ@@": Start of a quick quiz.
# "<p>@@QQA@@": Start of a quick-quiz answer.
# "<p>@@QQE@@": End of a quick-quiz answer, and thus of the quick quiz.
# "<p>@@QQAL@@": Place to put quick-quiz answer list.
#
# Places the result in file.html.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, you can access it online at
# http://www.gnu.org/licenses/gpl-2.0.html.
#
# Copyright (c) 2013 Paul E. McKenney, IBM Corporation.
fn=$1
if test ! -r $fn.htmlx
then
echo "Error: $fn.htmlx unreadable."
exit 1
fi
echo "<!-- DO NOT HAND EDIT. -->" > $fn.html
echo "<!-- Instead, edit $fn.htmlx and run 'sh htmlqqz.sh $fn' -->" >> $fn.html
awk < $fn.htmlx >> $fn.html '
state == "" && $1 != "<p>@@QQ@@" && $1 != "<p>@@QQAL@@" {
print $0;
if ($0 ~ /^<p>@@QQ/)
print "Bad Quick Quiz command: " NR " (expected <p>@@QQ@@ or <p>@@QQAL@@)." > "/dev/stderr"
next;
}
state == "" && $1 == "<p>@@QQ@@" {
qqn++;
qqlineno = NR;
haveqq = 1;
state = "qq";
print "<p><a name=\"Quick Quiz " qqn "\"><b>Quick Quiz " qqn "</b>:</a>"
next;
}
state == "qq" && $1 != "<p>@@QQA@@" {
qq[qqn] = qq[qqn] $0 "\n";
print $0
if ($0 ~ /^<p>@@QQ/)
print "Bad Quick Quiz command: " NR ". (expected <p>@@QQA@@)" > "/dev/stderr"
next;
}
state == "qq" && $1 == "<p>@@QQA@@" {
state = "qqa";
print "<br><a href=\"#qq" qqn "answer\">Answer</a>"
next;
}
state == "qqa" && $1 != "<p>@@QQE@@" {
qqa[qqn] = qqa[qqn] $0 "\n";
if ($0 ~ /^<p>@@QQ/)
print "Bad Quick Quiz command: " NR " (expected <p>@@QQE@@)." > "/dev/stderr"
next;
}
state == "qqa" && $1 == "<p>@@QQE@@" {
state = "";
next;
}
state == "" && $1 == "<p>@@QQAL@@" {
haveqq = "";
print "<h3><a name=\"Answers to Quick Quizzes\">"
print "Answers to Quick Quizzes</a></h3>"
print "";
for (i = 1; i <= qqn; i++) {
print "<a name=\"qq" i "answer\"></a>"
print "<p><b>Quick Quiz " i "</b>:"
print qq[i];
print "";
print "</p><p><b>Answer</b>:"
print qqa[i];
print "";
print "</p><p><a href=\"#Quick%20Quiz%20" i "\"><b>Back to Quick Quiz " i "</b>.</a>"
print "";
}
next;
}
END {
if (state != "")
print "Unterminated Quick Quiz: " qqlineno "." > "/dev/stderr"
else if (haveqq)
print "Missing \"<p>@@QQAL@@\", no Quick Quiz." > "/dev/stderr"
}'

58
Documentation/arm64/silicon-errata.txt Normal file
View File

@ -0,0 +1,58 @@
Silicon Errata and Software Workarounds
=======================================
Author: Will Deacon <will.deacon@arm.com>
Date : 27 November 2015
It is an unfortunate fact of life that hardware is often produced with
so-called "errata", which can cause it to deviate from the architecture
under specific circumstances. For hardware produced by ARM, these
errata are broadly classified into the following categories:
Category A: A critical error without a viable workaround.
Category B: A significant or critical error with an acceptable
workaround.
Category C: A minor error that is not expected to occur under normal
operation.
For more information, consult one of the "Software Developers Errata
Notice" documents available on infocenter.arm.com (registration
required).
As far as Linux is concerned, Category B errata may require some special
treatment in the operating system. For example, avoiding a particular
sequence of code, or configuring the processor in a particular way. A
less common situation may require similar actions in order to declassify
a Category A erratum into a Category C erratum. These are collectively
known as "software workarounds" and are only required in the minority of
cases (e.g. those cases that both require a non-secure workaround *and*
can be triggered by Linux).
For software workarounds that may adversely impact systems unaffected by
the erratum in question, a Kconfig entry is added under "Kernel
Features" -> "ARM errata workarounds via the alternatives framework".
These are enabled by default and patched in at runtime when an affected
CPU is detected. For less-intrusive workarounds, a Kconfig option is not
available and the code is structured (preferably with a comment) in such
a way that the erratum will not be hit.
This approach can make it slightly onerous to determine exactly which
errata are worked around in an arbitrary kernel source tree, so this
file acts as a registry of software workarounds in the Linux Kernel and
will be updated when new workarounds are committed and backported to
stable kernels.
| Implementor | Component | Erratum ID | Kconfig |
+----------------+-----------------+-----------------+-------------------------+
| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 |
| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 |
| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 |
| ARM | Cortex-A53 | #819472 | ARM64_ERRATUM_819472 |
| ARM | Cortex-A53 | #845719 | ARM64_ERRATUM_845719 |
| ARM | Cortex-A53 | #843419 | ARM64_ERRATUM_843419 |
| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 |
| ARM | Cortex-A57 | #852523 | N/A |
| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |

2
Documentation/cgroups/00-INDEX → Documentation/cgroup-v1/00-INDEX
View File

@ -24,7 +24,5 @@ net_prio.txt
- Network priority cgroups details and usages.
pids.txt
- Process number cgroups details and usages.
resource_counter.txt
- Resource Counter API.
unified-hierarchy.txt
- Description the new/next cgroup interface.

82
Documentation/cgroups/blkio-controller.txt → Documentation/cgroup-v1/blkio-controller.txt
View File

@ -84,8 +84,7 @@ Throttling/Upper Limit policy
- Run dd to read a file and see if rate is throttled to 1MB/s or not.
# dd if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
# iflag=direct
# dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
1024+0 records in
1024+0 records out
4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
@ -374,82 +373,3 @@ One can experience an overall throughput drop if you have created multiple
groups and put applications in that group which are not driving enough
IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
on individual groups and throughput should improve.
Writeback
=========
Page cache is dirtied through buffered writes and shared mmaps and
written asynchronously to the backing filesystem by the writeback
mechanism. Writeback sits between the memory and IO domains and
regulates the proportion of dirty memory by balancing dirtying and
write IOs.
On traditional cgroup hierarchies, relationships between different
controllers cannot be established making it impossible for writeback
to operate accounting for cgroup resource restrictions and all
writeback IOs are attributed to the root cgroup.
If both the blkio and memory controllers are used on the v2 hierarchy
and the filesystem supports cgroup writeback, writeback operations
correctly follow the resource restrictions imposed by both memory and
blkio controllers.
Writeback examines both system-wide and per-cgroup dirty memory status
and enforces the more restrictive of the two. Also, writeback control
parameters which are absolute values - vm.dirty_bytes and
vm.dirty_background_bytes - are distributed across cgroups according
to their current writeback bandwidth.
There's a peculiarity stemming from the discrepancy in ownership
granularity between memory controller and writeback. While memory
controller tracks ownership per page, writeback operates on inode
basis. cgroup writeback bridges the gap by tracking ownership by
inode but migrating ownership if too many foreign pages, pages which
don't match the current inode ownership, have been encountered while
writing back the inode.
This is a conscious design choice as writeback operations are
inherently tied to inodes making strictly following page ownership
complicated and inefficient. The only use case which suffers from
this compromise is multiple cgroups concurrently dirtying disjoint
regions of the same inode, which is an unlikely use case and decided
to be unsupported. Note that as memory controller assigns page
ownership on the first use and doesn't update it until the page is
released, even if cgroup writeback strictly follows page ownership,
multiple cgroups dirtying overlapping areas wouldn't work as expected.
In general, write-sharing an inode across multiple cgroups is not well
supported.
Filesystem support for cgroup writeback
---------------------------------------
A filesystem can make writeback IOs cgroup-aware by updating
address_space_operations->writepage[s]() to annotate bio's using the
following two functions.
* wbc_init_bio(@wbc, @bio)
Should be called for each bio carrying writeback data and associates
the bio with the inode's owner cgroup. Can be called anytime
between bio allocation and submission.
* wbc_account_io(@wbc, @page, @bytes)
Should be called for each data segment being written out. While
this function doesn't care exactly when it's called during the
writeback session, it's the easiest and most natural to call it as
data segments are added to a bio.
With writeback bio's annotated, cgroup support can be enabled per
super_block by setting MS_CGROUPWB in ->s_flags. This allows for
selective disabling of cgroup writeback support which is helpful when
certain filesystem features, e.g. journaled data mode, are
incompatible.
wbc_init_bio() binds the specified bio to its cgroup. Depending on
the configuration, the bio may be executed at a lower priority and if
the writeback session is holding shared resources, e.g. a journal
entry, may lead to priority inversion. There is no one easy solution
for the problem. Filesystems can try to work around specific problem
cases by skipping wbc_init_bio() or using bio_associate_blkcg()
directly.

0
Documentation/cgroups/cgroups.txt → Documentation/cgroup-v1/cgroups.txt
View File

0
Documentation/cgroups/cpuacct.txt → Documentation/cgroup-v1/cpuacct.txt
View File

0
Documentation/cgroups/cpusets.txt → Documentation/cgroup-v1/cpusets.txt
View File

0
Documentation/cgroups/devices.txt → Documentation/cgroup-v1/devices.txt
View File

0
Documentation/cgroups/freezer-subsystem.txt → Documentation/cgroup-v1/freezer-subsystem.txt
View File

0
Documentation/cgroups/hugetlb.txt → Documentation/cgroup-v1/hugetlb.txt
View File

0
Documentation/cgroups/memcg_test.txt → Documentation/cgroup-v1/memcg_test.txt
View File

0
Documentation/cgroups/memory.txt → Documentation/cgroup-v1/memory.txt
View File

0
Documentation/cgroups/net_cls.txt → Documentation/cgroup-v1/net_cls.txt
View File

0
Documentation/cgroups/net_prio.txt → Documentation/cgroup-v1/net_prio.txt
View File

0
Documentation/cgroups/pids.txt → Documentation/cgroup-v1/pids.txt
View File

1293
Documentation/cgroup-v2.txt Normal file
View File

File diff suppressed because it is too large Load Diff

647
Documentation/cgroups/unified-hierarchy.txt
View File

@ -1,647 +0,0 @@
Cgroup unified hierarchy
April, 2014 Tejun Heo <tj@kernel.org>
This document describes the changes made by unified hierarchy and
their rationales. It will eventually be merged into the main cgroup
documentation.
CONTENTS
1. Background
2. Basic Operation
2-1. Mounting
2-2. cgroup.subtree_control
2-3. cgroup.controllers
3. Structural Constraints
3-1. Top-down
3-2. No internal tasks
4. Delegation
4-1. Model of delegation
4-2. Common ancestor rule
5. Other Changes
5-1. [Un]populated Notification
5-2. Other Core Changes
5-3. Controller File Conventions
5-3-1. Format
5-3-2. Control Knobs
5-4. Per-Controller Changes
5-4-1. io
5-4-2. cpuset
5-4-3. memory
6. Planned Changes
6-1. CAP for resource control
1. Background
cgroup allows an arbitrary number of hierarchies and each hierarchy
can host any number of controllers. While this seems to provide a
high level of flexibility, it isn't quite useful in practice.
For example, as there is only one instance of each controller, utility
type controllers such as freezer which can be useful in all
hierarchies can only be used in one. The issue is exacerbated by the
fact that controllers can't be moved around once hierarchies are
populated. Another issue is that all controllers bound to a hierarchy
are forced to have exactly the same view of the hierarchy. It isn't
possible to vary the granularity depending on the specific controller.
In practice, these issues heavily limit which controllers can be put
on the same hierarchy and most configurations resort to putting each
controller on its own hierarchy. Only closely related ones, such as
the cpu and cpuacct controllers, make sense to put on the same
hierarchy. This often means that userland ends up managing multiple
similar hierarchies repeating the same steps on each hierarchy
whenever a hierarchy management operation is necessary.
Unfortunately, support for multiple hierarchies comes at a steep cost.
Internal implementation in cgroup core proper is dazzlingly
complicated but more importantly the support for multiple hierarchies
restricts how cgroup is used in general and what controllers can do.
There's no limit on how many hierarchies there may be, which means
that a task's cgroup membership can't be described in finite length.
The key may contain any varying number of entries and is unlimited in
length, which makes it highly awkward to handle and leads to addition
of controllers which exist only to identify membership, which in turn
exacerbates the original problem.
Also, as a controller can't have any expectation regarding what shape
of hierarchies other controllers would be on, each controller has to
assume that all other controllers are operating on completely
orthogonal hierarchies. This makes it impossible, or at least very
cumbersome, for controllers to cooperate with each other.
In most use cases, putting controllers on hierarchies which are
completely orthogonal to each other isn't necessary. What usually is
called for is the ability to have differing levels of granularity
depending on the specific controller. In other words, hierarchy may
be collapsed from leaf towards root when viewed from specific
controllers. For example, a given configuration might not care about
how memory is distributed beyond a certain level while still wanting
to control how CPU cycles are distributed.
Unified hierarchy is the next version of cgroup interface. It aims to
address the aforementioned issues by having more structure while
retaining enough flexibility for most use cases. Various other
general and controller-specific interface issues are also addressed in
the process.
2. Basic Operation
2-1. Mounting
Currently, unified hierarchy can be mounted with the following mount
command. Note that this is still under development and scheduled to
change soon.
mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT
All controllers which support the unified hierarchy and are not bound
to other hierarchies are automatically bound to unified hierarchy and
show up at the root of it. Controllers which are enabled only in the
root of unified hierarchy can be bound to other hierarchies. This
allows mixing unified hierarchy with the traditional multiple
hierarchies in a fully backward compatible way.
A controller can be moved across hierarchies only after the controller
is no longer referenced in its current hierarchy. Because per-cgroup
controller states are destroyed asynchronously and controllers may
have lingering references, a controller may not show up immediately on
the unified hierarchy after the final umount of the previous
hierarchy. Similarly, a controller should be fully disabled to be
moved out of the unified hierarchy and it may take some time for the
disabled controller to become available for other hierarchies;
furthermore, due to dependencies among controllers, other controllers
may need to be disabled too.
While useful for development and manual configurations, dynamically
moving controllers between the unified and other hierarchies is
strongly discouraged for production use. It is recommended to decide
the hierarchies and controller associations before starting using the
controllers.
2-2. cgroup.subtree_control
All cgroups on unified hierarchy have a "cgroup.subtree_control" file
which governs which controllers are enabled on the children of the
cgroup. Let's assume a hierarchy like the following.
root - A - B - C
\ D
root's "cgroup.subtree_control" file determines which controllers are
enabled on A. A's on B. B's on C and D. This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent. In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in a "cgroup.subtree_control" file declares that
distribution of the respective resources of the cgroup will be
controlled. Note that this means that controller enable states are
shared among siblings.
When read, the file contains a space-separated list of currently
enabled controllers. A write to the file should contain a
space-separated list of controllers with '+' or '-' prefixed (without
the quotes). Controllers prefixed with '+' are enabled and '-'
disabled. If a controller is listed multiple times, the last entry
wins. The specific operations are executed atomically - either all
succeed or fail.
2-3. cgroup.controllers
Read-only "cgroup.controllers" file contains a space-separated list of
controllers which can be enabled in the cgroup's
"cgroup.subtree_control" file.
In the root cgroup, this lists controllers which are not bound to
other hierarchies and the content changes as controllers are bound to
and unbound from other hierarchies.
In non-root cgroups, the content of this file equals that of the
parent's "cgroup.subtree_control" file as only controllers enabled
from the parent can be used in its children.
3. Structural Constraints
3-1. Top-down
As it doesn't make sense to nest control of an uncontrolled resource,
all non-root "cgroup.subtree_control" files can only contain
controllers which are enabled in the parent's "cgroup.subtree_control"
file. A controller can be enabled only if the parent has the
controller enabled and a controller can't be disabled if one or more
children have it enabled.
3-2. No internal tasks
One long-standing issue that cgroup faces is the competition between
tasks belonging to the parent cgroup and its children cgroups. This
is inherently nasty as two different types of entities compete and
there is no agreed-upon obvious way to handle it. Different
controllers are doing different things.
The cpu controller considers tasks and cgroups as equivalents and maps
nice levels to cgroup weights. This works for some cases but falls
flat when children should be allocated specific ratios of CPU cycles
and the number of internal tasks fluctuates - the ratios constantly
change as the number of competing entities fluctuates. There also are
other issues. The mapping from nice level to weight isn't obvious or
universal, and there are various other knobs which simply aren't
available for tasks.
The io controller implicitly creates a hidden leaf node for each
cgroup to host the tasks. The hidden leaf has its own copies of all
the knobs with "leaf_" prefixed. While this allows equivalent control
over internal tasks, it's with serious drawbacks. It always adds an
extra layer of nesting which may not be necessary, makes the interface
messy and significantly complicates the implementation.
The memory controller currently doesn't have a way to control what
happens between internal tasks and child cgroups and the behavior is
not clearly defined. There have been attempts to add ad-hoc behaviors
and knobs to tailor the behavior to specific workloads. Continuing
this direction will lead to problems which will be extremely difficult
to resolve in the long term.
Multiple controllers struggle with internal tasks and came up with
different ways to deal with it; unfortunately, all the approaches in
use now are severely flawed and, furthermore, the widely different
behaviors make cgroup as whole highly inconsistent.
It is clear that this is something which needs to be addressed from
cgroup core proper in a uniform way so that controllers don't need to
worry about it and cgroup as a whole shows a consistent and logical
behavior. To achieve that, unified hierarchy enforces the following
structural constraint:
Except for the root, only cgroups which don't contain any task may
have controllers enabled in their "cgroup.subtree_control" files.
Combined with other properties, this guarantees that, when a
controller is looking at the part of the hierarchy which has it
enabled, tasks are always only on the leaves. This rules out
situations where child cgroups compete against internal tasks of the
parent.
There are two things to note. Firstly, the root cgroup is exempt from
the restriction. Root contains tasks and anonymous resource
consumption which can't be associated with any other cgroup and
requires special treatment from most controllers. How resource
consumption in the root cgroup is governed is up to each controller.
Secondly, the restriction doesn't take effect if there is no enabled
controller in the cgroup's "cgroup.subtree_control" file. This is
important as otherwise it wouldn't be possible to create children of a
populated cgroup. To control resource distribution of a cgroup, the
cgroup must create children and transfer all its tasks to the children
before enabling controllers in its "cgroup.subtree_control" file.
4. Delegation
4-1. Model of delegation
A cgroup can be delegated to a less privileged user by granting write
access of the directory and its "cgroup.procs" file to the user. Note
that the resource control knobs in a given directory concern the
resources of the parent and thus must not be delegated along with the
directory.
Once delegated, the user can build sub-hierarchy under the directory,
organize processes as it sees fit and further distribute the resources
it got from the parent. The limits and other settings of all resource
controllers are hierarchical and regardless of what happens in the
delegated sub-hierarchy, nothing can escape the resource restrictions
imposed by the parent.
Currently, cgroup doesn't impose any restrictions on the number of
cgroups in or nesting depth of a delegated sub-hierarchy; however,
this may in the future be limited explicitly.
4-2. Common ancestor rule
On the unified hierarchy, to write to a "cgroup.procs" file, in
addition to the usual write permission to the file and uid match, the
writer must also have write access to the "cgroup.procs" file of the
common ancestor of the source and destination cgroups. This prevents
delegatees from smuggling processes across disjoint sub-hierarchies.
Let's say cgroups C0 and C1 have been delegated to user U0 who created
C00, C01 under C0 and C10 under C1 as follows.
~~~~~~~~~~~~~ - C0 - C00
~ cgroup ~ \ C01
~ hierarchy ~
~~~~~~~~~~~~~ - C1 - C10
C0 and C1 are separate entities in terms of resource distribution
regardless of their relative positions in the hierarchy. The
resources the processes under C0 are entitled to are controlled by
C0's ancestors and may be completely different from C1. It's clear
that the intention of delegating C0 to U0 is allowing U0 to organize
the processes under C0 and further control the distribution of C0's
resources.
On traditional hierarchies, if a task has write access to "tasks" or
"cgroup.procs" file of a cgroup and its uid agrees with the target, it
can move the target to the cgroup. In the above example, U0 will not
only be able to move processes in each sub-hierarchy but also across
the two sub-hierarchies, effectively allowing it to violate the
organizational and resource restrictions implied by the hierarchical
structure above C0 and C1.
On the unified hierarchy, let's say U0 wants to write the pid of a
process which has a matching uid and is currently in C10 into
"C00/cgroup.procs". U0 obviously has write access to the file and
migration permission on the process; however, the common ancestor of
the source cgroup C10 and the destination cgroup C00 is above the
points of delegation and U0 would not have write access to its
"cgroup.procs" and thus be denied with -EACCES.
5. Other Changes
5-1. [Un]populated Notification
cgroup users often need a way to determine when a cgroup's
subhierarchy becomes empty so that it can be cleaned up. cgroup
currently provides release_agent for it; unfortunately, this mechanism
is riddled with issues.
- It delivers events by forking and execing a userland binary
specified as the release_agent. This is a long deprecated method of
notification delivery. It's extremely heavy, slow and cumbersome to
integrate with larger infrastructure.
- There is single monitoring point at the root. There's no way to
delegate management of a subtree.
- The event isn't recursive. It triggers when a cgroup doesn't have
any tasks or child cgroups. Events for internal nodes trigger only
after all children are removed. This again makes it impossible to
delegate management of a subtree.
- Events are filtered from the kernel side. A "notify_on_release"
file is used to subscribe to or suppress release events. This is
unnecessarily complicated and probably done this way because event
delivery itself was expensive.
Unified hierarchy implements "populated" field in "cgroup.events"
interface file which can be used to monitor whether the cgroup's
subhierarchy has tasks in it or not. Its value is 0 if there is no
task in the cgroup and its descendants; otherwise, 1. poll and
[id]notify events are triggered when the value changes.
This is significantly lighter and simpler and trivially allows
delegating management of subhierarchy - subhierarchy monitoring can
block further propagation simply by putting itself or another process
in the subhierarchy and monitor events that it's interested in from
there without interfering with monitoring higher in the tree.
In unified hierarchy, the release_agent mechanism is no longer
supported and the interface files "release_agent" and
"notify_on_release" do not exist.
5-2. Other Core Changes
- None of the mount options is allowed.
- remount is disallowed.
- rename(2) is disallowed.
- The "tasks" file is removed. Everything should at process
granularity. Use the "cgroup.procs" file instead.
- The "cgroup.procs" file is not sorted. pids will be unique unless
they got recycled in-between reads.
- The "cgroup.clone_children" file is removed.
- /proc/PID/cgroup keeps reporting the cgroup that a zombie belonged
to before exiting. If the cgroup is removed before the zombie is
reaped, " (deleted)" is appeneded to the path.
5-3. Controller File Conventions
5-3-1. Format
In general, all controller files should be in one of the following
formats whenever possible.
- Values only files
VAL0 VAL1...\n
- Flat keyed files
KEY0 VAL0\n
KEY1 VAL1\n
...
- Nested keyed files
KEY0 SUB_KEY0=VAL00 SUB_KEY1=VAL01...
KEY1 SUB_KEY0=VAL10 SUB_KEY1=VAL11...
...
For a writeable file, the format for writing should generally match
reading; however, controllers may allow omitting later fields or
implement restricted shortcuts for most common use cases.
For both flat and nested keyed files, only the values for a single key
can be written at a time. For nested keyed files, the sub key pairs
may be specified in any order and not all pairs have to be specified.
5-3-2. Control Knobs
- Settings for a single feature should generally be implemented in a
single file.
- In general, the root cgroup should be exempt from resource control
and thus shouldn't have resource control knobs.
- If a controller implements ratio based resource distribution, the
control knob should be named "weight" and have the range [1, 10000]
and 100 should be the default value. The values are chosen to allow
enough and symmetric bias in both directions while keeping it
intuitive (the default is 100%).
- If a controller implements an absolute resource guarantee and/or
limit, the control knobs should be named "min" and "max"
respectively. If a controller implements best effort resource
gurantee and/or limit, the control knobs should be named "low" and
"high" respectively.
In the above four control files, the special token "max" should be
used to represent upward infinity for both reading and writing.
- If a setting has configurable default value and specific overrides,
the default settings should be keyed with "default" and appear as
the first entry in the file. Specific entries can use "default" as
its value to indicate inheritance of the default value.
- For events which are not very high frequency, an interface file
"events" should be created which lists event key value pairs.
Whenever a notifiable event happens, file modified event should be
generated on the file.
5-4. Per-Controller Changes
5-4-1. io
- blkio is renamed to io. The interface is overhauled anyway. The
new name is more in line with the other two major controllers, cpu
and memory, and better suited given that it may be used for cgroup
writeback without involving block layer.
- Everything including stat is always hierarchical making separate
recursive stat files pointless and, as no internal node can have
tasks, leaf weights are meaningless. The operation model is
simplified and the interface is overhauled accordingly.
io.stat
The stat file. The reported stats are from the point where
bio's are issued to request_queue. The stats are counted
independent of which policies are enabled. Each line in the
file follows the following format. More fields may later be
added at the end.
$MAJ:$MIN rbytes=$RBYTES wbytes=$WBYTES rios=$RIOS wrios=$WIOS
io.weight
The weight setting, currently only available and effective if
cfq-iosched is in use for the target device. The weight is
between 1 and 10000 and defaults to 100. The first line
always contains the default weight in the following format to
use when per-device setting is missing.
default $WEIGHT
Subsequent lines list per-device weights of the following
format.
$MAJ:$MIN $WEIGHT
Writing "$WEIGHT" or "default $WEIGHT" changes the default
setting. Writing "$MAJ:$MIN $WEIGHT" sets per-device weight
while "$MAJ:$MIN default" clears it.
This file is available only on non-root cgroups.
io.max
The maximum bandwidth and/or iops setting, only available if
blk-throttle is enabled. The file is of the following format.
$MAJ:$MIN rbps=$RBPS wbps=$WBPS riops=$RIOPS wiops=$WIOPS
${R|W}BPS are read/write bytes per second and ${R|W}IOPS are
read/write IOs per second. "max" indicates no limit. Writing
to the file follows the same format but the individual
settings may be omitted or specified in any order.
This file is available only on non-root cgroups.
5-4-2. cpuset
- Tasks are kept in empty cpusets after hotplug and take on the masks
of the nearest non-empty ancestor, instead of being moved to it.
- A task can be moved into an empty cpuset, and again it takes on the
masks of the nearest non-empty ancestor.
5-4-3. memory
- use_hierarchy is on by default and the cgroup file for the flag is
not created.
- The original lower boundary, the soft limit, is defined as a limit
that is per default unset. As a result, the set of cgroups that
global reclaim prefers is opt-in, rather than opt-out. The costs
for optimizing these mostly negative lookups are so high that the
implementation, despite its enormous size, does not even provide the
basic desirable behavior. First off, the soft limit has no
hierarchical meaning. All configured groups are organized in a
global rbtree and treated like equal peers, regardless where they
are located in the hierarchy. This makes subtree delegation
impossible. Second, the soft limit reclaim pass is so aggressive
that it not just introduces high allocation latencies into the
system, but also impacts system performance due to overreclaim, to
the point where the feature becomes self-defeating.
The memory.low boundary on the other hand is a top-down allocated
reserve. A cgroup enjoys reclaim protection when it and all its
ancestors are below their low boundaries, which makes delegation of
subtrees possible. Secondly, new cgroups have no reserve per
default and in the common case most cgroups are eligible for the
preferred reclaim pass. This allows the new low boundary to be
efficiently implemented with just a minor addition to the generic
reclaim code, without the need for out-of-band data structures and
reclaim passes. Because the generic reclaim code considers all
cgroups except for the ones running low in the preferred first
reclaim pass, overreclaim of individual groups is eliminated as
well, resulting in much better overall workload performance.
- The original high boundary, the hard limit, is defined as a strict
limit that can not budge, even if the OOM killer has to be called.
But this generally goes against the goal of making the most out of
the available memory. The memory consumption of workloads varies
during runtime, and that requires users to overcommit. But doing
that with a strict upper limit requires either a fairly accurate
prediction of the working set size or adding slack to the limit.
Since working set size estimation is hard and error prone, and
getting it wrong results in OOM kills, most users tend to err on the
side of a looser limit and end up wasting precious resources.
The memory.high boundary on the other hand can be set much more
conservatively. When hit, it throttles allocations by forcing them
into direct reclaim to work off the excess, but it never invokes the
OOM killer. As a result, a high boundary that is chosen too
aggressively will not terminate the processes, but instead it will
lead to gradual performance degradation. The user can monitor this
and make corrections until the minimal memory footprint that still
gives acceptable performance is found.
In extreme cases, with many concurrent allocations and a complete
breakdown of reclaim progress within the group, the high boundary
can be exceeded. But even then it's mostly better to satisfy the
allocation from the slack available in other groups or the rest of
the system than killing the group. Otherwise, memory.max is there
to limit this type of spillover and ultimately contain buggy or even
malicious applications.
- The original control file names are unwieldy and inconsistent in
many different ways. For example, the upper boundary hit count is
exported in the memory.failcnt file, but an OOM event count has to
be manually counted by listening to memory.oom_control events, and
lower boundary / soft limit events have to be counted by first
setting a threshold for that value and then counting those events.
Also, usage and limit files encode their units in the filename.
That makes the filenames very long, even though this is not
information that a user needs to be reminded of every time they type
out those names.
To address these naming issues, as well as to signal clearly that
the new interface carries a new configuration model, the naming
conventions in it necessarily differ from the old interface.
- The original limit files indicate the state of an unset limit with a
Very High Number, and a configured limit can be unset by echoing -1
into those files. But that very high number is implementation and
architecture dependent and not very descriptive. And while -1 can
be understood as an underflow into the highest possible value, -2 or
-10M etc. do not work, so it's not consistent.
memory.low, memory.high, and memory.max will use the string "max" to
indicate and set the highest possible value.
6. Planned Changes
6-1. CAP for resource control
Unified hierarchy will require one of the capabilities(7), which is
yet to be decided, for all resource control related knobs. Process
organization operations - creation of sub-cgroups and migration of
processes in sub-hierarchies may be delegated by changing the
ownership and/or permissions on the cgroup directory and
"cgroup.procs" interface file; however, all operations which affect
resource control - writes to a "cgroup.subtree_control" file or any
controller-specific knobs - will require an explicit CAP privilege.
This, in part, is to prevent the cgroup interface from being
inadvertently promoted to programmable API used by non-privileged
binaries. cgroup exposes various aspects of the system in ways which
aren't properly abstracted for direct consumption by regular programs.
This is an administration interface much closer to sysctl knobs than
system calls. Even the basic access model, being filesystem path
based, isn't suitable for direct consumption. There's no way to
access "my cgroup" in a race-free way or make multiple operations
atomic against migration to another cgroup.
Another aspect is that, for better or for worse, the cgroup interface
goes through far less scrutiny than regular interfaces for
unprivileged userland. The upside is that cgroup is able to expose
useful features which may not be suitable for general consumption in a
reasonable time frame. It provides a relatively short path between
internal details and userland-visible interface. Of course, this
shortcut comes with high risk. We go through what we go through for
general kernel APIs for good reasons. It may end up leaking internal
details in a way which can exert significant pain by locking the
kernel into a contract that can't be maintained in a reasonable
manner.
Also, due to the specific nature, cgroup and its controllers don't
tend to attract attention from a wide scope of developers. cgroup's
short history is already fraught with severely mis-designed
interfaces, unnecessary commitments to and exposing of internal
details, broken and dangerous implementations of various features.
Keeping cgroup as an administration interface is both advantageous for
its role and imperative given its nature. Some of the cgroup features
may make sense for unprivileged access. If deemed justified, those
must be further abstracted and implemented as a different interface,
be it a system call or process-private filesystem, and survive through
the scrutiny that any interface for general consumption is required to
go through.
Requiring CAP is not a complete solution but should serve as a
significant deterrent against spraying cgroup usages in non-privileged
programs.

233
Documentation/cpu-freq/intel-pstate.txt
View File

@ -1,61 +1,131 @@
Intel P-state driver
Intel P-State driver
--------------------
This driver provides an interface to control the P state selection for
SandyBridge+ Intel processors. The driver can operate two different
modes based on the processor model, legacy mode and Hardware P state (HWP)
mode.
This driver provides an interface to control the P-State selection for the
SandyBridge+ Intel processors.
In legacy mode, the Intel P-state implements two internal governors,
performance and powersave, that differ from the general cpufreq governors of
the same name (the general cpufreq governors implement target(), whereas the
internal Intel P-state governors implement setpolicy()). The internal
performance governor sets the max_perf_pct and min_perf_pct to 100; that is,
the governor selects the highest available P state to maximize the performance
of the core. The internal powersave governor selects the appropriate P state
based on the current load on the CPU.
The following document explains P-States:
http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
As stated in the document, P-State doesn’t exactly mean a frequency. However, for
the sake of the relationship with cpufreq, P-State and frequency are used
interchangeably.
In HWP mode P state selection is implemented in the processor
itself. The driver provides the interfaces between the cpufreq core and
the processor to control P state selection based on user preferences
and reporting frequency to the cpufreq core. In this mode the
internal Intel P-state governor code is disabled.
Understanding the cpufreq core governors and policies are important before
discussing more details about the Intel P-State driver. Based on what callbacks
a cpufreq driver provides to the cpufreq core, it can support two types of
drivers:
- with target_index() callback: In this mode, the drivers using cpufreq core
simply provide the minimum and maximum frequency limits and an additional
interface target_index() to set the current frequency. The cpufreq subsystem
has a number of scaling governors ("performance", "powersave", "ondemand",
etc.). Depending on which governor is in use, cpufreq core will call for
transitions to a specific frequency using target_index() callback.
- setpolicy() callback: In this mode, drivers do not provide target_index()
callback, so cpufreq core can't request a transition to a specific frequency.
The driver provides minimum and maximum frequency limits and callbacks to set a
policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
The cpufreq core can request the driver to operate in any of the two policies:
"performance: and "powersave". The driver decides which frequency to use based
on the above policy selection considering minimum and maximum frequency limits.
In addition to the interfaces provided by the cpufreq core for
controlling frequency the driver provides sysfs files for
controlling P state selection. These files have been added to
/sys/devices/system/cpu/intel_pstate/
The Intel P-State driver falls under the latter category, which implements the
setpolicy() callback. This driver decides what P-State to use based on the
requested policy from the cpufreq core. If the processor is capable of
selecting its next P-State internally, then the driver will offload this
responsibility to the processor (aka HWP: Hardware P-States). If not, the
driver implements algorithms to select the next P-State.
max_perf_pct: limits the maximum P state that will be requested by
the driver stated as a percentage of the available performance. The
available (P states) performance may be reduced by the no_turbo
Since these policies are implemented in the driver, they are not same as the
cpufreq scaling governors implementation, even if they have the same name in
the cpufreq sysfs (scaling_governors). For example the "performance" policy is
similar to cpufreq’s "performance" governor, but "powersave" is completely
different than the cpufreq "powersave" governor. The strategy here is similar
to cpufreq "ondemand", where the requested P-State is related to the system load.
Sysfs Interface
In addition to the frequency-controlling interfaces provided by the cpufreq
core, the driver provides its own sysfs files to control the P-State selection.
These files have been added to /sys/devices/system/cpu/intel_pstate/.
Any changes made to these files are applicable to all CPUs (even in a
multi-package system).
max_perf_pct: Limits the maximum P-State that will be requested by
the driver. It states it as a percentage of the available performance. The
available (P-State) performance may be reduced by the no_turbo
setting described below.
min_perf_pct: limits the minimum P state that will be requested by
the driver stated as a percentage of the max (non-turbo)
min_perf_pct: Limits the minimum P-State that will be requested by
the driver. It states it as a percentage of the max (non-turbo)
performance level.
no_turbo: limits the driver to selecting P states below the turbo
no_turbo: Limits the driver to selecting P-State below the turbo
frequency range.
turbo_pct: displays the percentage of the total performance that
is supported by hardware that is in the turbo range. This number
turbo_pct: Displays the percentage of the total performance that
is supported by hardware that is in the turbo range. This number
is independent of whether turbo has been disabled or not.
num_pstates: displays the number of pstates that are supported
by hardware. This number is independent of whether turbo has
num_pstates: Displays the number of P-States that are supported
by hardware. This number is independent of whether turbo has
been disabled or not.
For example, if a system has these parameters:
Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
Max non turbo ratio: 0x17
Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
Sysfs will show :
max_perf_pct:100, which corresponds to 1 core ratio
min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
no_turbo:0, turbo is not disabled
num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3: System Programming Guide" to understand ratios.
cpufreq sysfs for Intel P-State
Since this driver registers with cpufreq, cpufreq sysfs is also presented.
There are some important differences, which need to be considered.
scaling_cur_freq: This displays the real frequency which was used during
the last sample period instead of what is requested. Some other cpufreq driver,
like acpi-cpufreq, displays what is requested (Some changes are on the
way to fix this for acpi-cpufreq driver). The same is true for frequencies
displayed at /proc/cpuinfo.
scaling_governor: This displays current active policy. Since each CPU has a
cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
is not possible with Intel P-States, as there is one common policy for all
CPUs. Here, the last requested policy will be applicable to all CPUs. It is
suggested that one use the cpupower utility to change policy to all CPUs at the
same time.
scaling_setspeed: This attribute can never be used with Intel P-State.
scaling_max_freq/scaling_min_freq: This interface can be used similarly to
the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
are converted to nearest possible P-State, this is prone to rounding errors.
This method is not preferred to limit performance.
affected_cpus: Not used
related_cpus: Not used
For contemporary Intel processors, the frequency is controlled by the
processor itself and the P-states exposed to software are related to
processor itself and the P-State exposed to software is related to
performance levels. The idea that frequency can be set to a single
frequency is fiction for Intel Core processors. Even if the scaling
driver selects a single P state the actual frequency the processor
frequency is fictional for Intel Core processors. Even if the scaling
driver selects a single P-State, the actual frequency the processor
will run at is selected by the processor itself.
For legacy mode debugfs files have also been added to allow tuning of
the internal governor algorythm. These files are located at
/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode.
Tuning Intel P-State driver
When HWP mode is not used, debugfs files have also been added to allow the
tuning of the internal governor algorithm. These files are located at
/sys/kernel/debug/pstate_snb/. The algorithm uses a PID (Proportional
Integral Derivative) controller. The PID tunable parameters are:
deadband
d_gain_pct
@ -63,3 +133,90 @@ the internal governor algorythm. These files are located at
p_gain_pct
sample_rate_ms
setpoint
To adjust these parameters, some understanding of driver implementation is
necessary. There are some tweeks described here, but be very careful. Adjusting
them requires expert level understanding of power and performance relationship.
These limits are only useful when the "powersave" policy is active.
-To make the system more responsive to load changes, sample_rate_ms can
be adjusted (current default is 10ms).
-To make the system use higher performance, even if the load is lower, setpoint
can be adjusted to a lower number. This will also lead to faster ramp up time
to reach the maximum P-State.
If there are no derivative and integral coefficients, The next P-State will be
equal to:
current P-State - ((setpoint - current cpu load) * p_gain_pct)
For example, if the current PID parameters are (Which are defaults for the core
processors like SandyBridge):
deadband = 0
d_gain_pct = 0
i_gain_pct = 0
p_gain_pct = 20
sample_rate_ms = 10
setpoint = 97
If the current P-State = 0x08 and current load = 100, this will result in the
next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
goes up by only 1. If during next sample interval the current load doesn't
change and still 100, then P-State goes up by one again. This process will
continue as long as the load is more than the setpoint until the maximum P-State
is reached.
For the same load at setpoint = 60, this will result in the next P-State
= 0x08 - ((60 - 100) * 0.2) = 16
So by changing the setpoint from 97 to 60, there is an increase of the
next P-State from 9 to 16. So this will make processor execute at higher
P-State for the same CPU load. If the load continues to be more than the
setpoint during next sample intervals, then P-State will go up again till the
maximum P-State is reached. But the ramp up time to reach the maximum P-State
will be much faster when the setpoint is 60 compared to 97.
Debugging Intel P-State driver
Event tracing
To debug P-State transition, the Linux event tracing interface can be used.
There are two specific events, which can be enabled (Provided the kernel
configs related to event tracing are enabled).
# cd /sys/kernel/debug/tracing/
# echo 1 > events/power/pstate_sample/enable
# echo 1 > events/power/cpu_frequency/enable
# cat trace
gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
freq=2474476
cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
Using ftrace
If function level tracing is required, the Linux ftrace interface can be used.
For example if we want to check how often a function to set a P-State is
called, we can set ftrace filter to intel_pstate_set_pstate.
# cd /sys/kernel/debug/tracing/
# cat available_filter_functions | grep -i pstate
intel_pstate_set_pstate
intel_pstate_cpu_init
...
# echo intel_pstate_set_pstate > set_ftrace_filter
# echo function > current_tracer
# cat trace | head -15
# tracer: function
#
# entries-in-buffer/entries-written: 80/80 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
<idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func

4
Documentation/cpu-freq/pcc-cpufreq.txt
View File

@ -159,8 +159,8 @@ to be strictly associated with a P-state.
2.2 cpuinfo_transition_latency:
-------------------------------
The cpuinfo_transition_latency field is 0. The PCC specification does
not include a field to expose this value currently.
The cpuinfo_transition_latency field is CPUFREQ_ETERNAL. The PCC specification
does not include a field to expose this value currently.
2.3 cpuinfo_cur_freq:
---------------------

40
Documentation/device-mapper/verity.txt
View File

@ -18,11 +18,11 @@ Construction Parameters
0 is the original format used in the Chromium OS.
The salt is appended when hashing, digests are stored continuously and
the rest of the block is padded with zeros.
the rest of the block is padded with zeroes.
1 is the current format that should be used for new devices.
The salt is prepended when hashing and each digest is
padded with zeros to the power of two.
padded with zeroes to the power of two.
<dev>
This is the device containing data, the integrity of which needs to be
@ -79,6 +79,37 @@ restart_on_corruption
not compatible with ignore_corruption and requires user space support to
avoid restart loops.
ignore_zero_blocks
Do not verify blocks that are expected to contain zeroes and always return
zeroes instead. This may be useful if the partition contains unused blocks
that are not guaranteed to contain zeroes.
use_fec_from_device <fec_dev>
Use forward error correction (FEC) to recover from corruption if hash
verification fails. Use encoding data from the specified device. This
may be the same device where data and hash blocks reside, in which case
fec_start must be outside data and hash areas.
If the encoding data covers additional metadata, it must be accessible
on the hash device after the hash blocks.
Note: block sizes for data and hash devices must match. Also, if the
verity <dev> is encrypted the <fec_dev> should be too.
fec_roots <num>
Number of generator roots. This equals to the number of parity bytes in
the encoding data. For example, in RS(M, N) encoding, the number of roots
is M-N.
fec_blocks <num>
The number of encoding data blocks on the FEC device. The block size for
the FEC device is <data_block_size>.
fec_start <offset>
This is the offset, in <data_block_size> blocks, from the start of the
FEC device to the beginning of the encoding data.
Theory of operation
===================
@ -98,6 +129,11 @@ per-block basis. This allows for a lightweight hash computation on first read
into the page cache. Block hashes are stored linearly, aligned to the nearest
block size.
If forward error correction (FEC) support is enabled any recovery of
corrupted data will be verified using the cryptographic hash of the
corresponding data. This is why combining error correction with
integrity checking is essential.
Hash Tree
---------

17
Documentation/devicetree/bindings/arm/cpus.txt
View File

@ -242,6 +242,23 @@ nodes to be present and contain the properties described below.
Definition: Specifies the syscon node controlling the cpu core
power domains.
- dynamic-power-coefficient
Usage: optional
Value type: <prop-encoded-array>
Definition: A u32 value that represents the running time dynamic
power coefficient in units of mW/MHz/uVolt^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
The dynamic power consumption of the CPU is
proportional to the square of the Voltage (V) and
the clock frequency (f). The coefficient is used to
calculate the dynamic power as below -
Pdyn = dynamic-power-coefficient * V^2 * f
where voltage is in uV, frequency is in MHz.
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {

24
Documentation/devicetree/bindings/arm/l2cc.txt → Documentation/devicetree/bindings/arm/l2c2x0.txt
View File

@ -1,7 +1,8 @@
* ARM L2 Cache Controller
ARM cores often have a separate level 2 cache controller. There are various
implementations of the L2 cache controller with compatible programming models.
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
PL310 and variants) based level 2 cache controller. All these various implementations
of the L2 cache controller have compatible programming models (Note 1).
Some of the properties that are just prefixed "cache-*" are taken from section
3.7.3 of the ePAPR v1.1 specification which can be found at:
https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
@ -67,12 +68,17 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
- arm,shared-override : The default behavior of the pl310 cache controller with
respect to the shareable attribute is to transform "normal memory
non-cacheable transactions" into "cacheable no allocate" (for reads) or
"write through no write allocate" (for writes).
- arm,shared-override : The default behavior of the L220 or PL310 cache
controllers with respect to the shareable attribute is to transform "normal
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
or "write through no write allocate" (for writes).
On systems where this may cause DMA buffer corruption, this property must be
specified to indicate that such transforms are precluded.
- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
will randomly hang unless outer sync operations are disabled.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
@ -91,3 +97,9 @@ L2: cache-controller {
cache-level = <2>;
interrupts = <45>;
};
Note 1: The description in this document doesn't apply to integrated L2
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
integrated L2 controllers are assumed to be all preconfigured by
early secure boot code. Thus no need to deal with their configuration
in the kernel at all.

5
Documentation/devicetree/bindings/arm/pmu.txt
View File

@ -9,8 +9,9 @@ Required properties:
- compatible : should be one of
"apm,potenza-pmu"
"arm,armv8-pmuv3"
"arm.cortex-a57-pmu"
"arm.cortex-a53-pmu"
"arm,cortex-a72-pmu"
"arm,cortex-a57-pmu"
"arm,cortex-a53-pmu"
"arm,cortex-a17-pmu"
"arm,cortex-a15-pmu"
"arm,cortex-a12-pmu"

4
Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
View File

@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : compatible list, may contain "brcm,bcm7445-ahci" and/or
- compatible : should be one or more of
"brcm,bcm7425-ahci"
"brcm,bcm7445-ahci"
"brcm,sata3-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"

1
Documentation/devicetree/bindings/ata/sata_rcar.txt
View File

@ -8,6 +8,7 @@ Required properties:
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
- "renesas,sata-r8a7795" for R-Car H3
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.

91
Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt Normal file
View File

@ -0,0 +1,91 @@
Binding for ST's CPUFreq driver
===============================
ST's CPUFreq driver attempts to read 'process' and 'version' attributes
from the SoC, then supplies the OPP framework with 'prop' and 'supported
hardware' information respectively. The framework is then able to read
the DT and operate in the usual way.
For more information about the expected DT format [See: ../opp/opp.txt].
Frequency Scaling only
----------------------
No vendor specific driver required for this.
Located in CPU's node:
- operating-points : [See: ../power/opp.txt]
Example [safe]
--------------
cpus {
cpu@0 {
/* kHz uV */
operating-points = <1500000 0
1200000 0
800000 0
500000 0>;
};
};
Dynamic Voltage and Frequency Scaling (DVFS)
--------------------------------------------
This requires the ST CPUFreq driver to supply 'process' and 'version' info.
Located in CPU's node:
- operating-points-v2 : [See ../power/opp.txt]
Example [unsafe]
----------------
cpus {
cpu@0 {
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table {
compatible = "operating-points-v2";
/* ############################################################### */
/* # WARNING: Do not attempt to copy/replicate these nodes, # */
/* # they are only to be supplied by the bootloader !!! # */
/* ############################################################### */
opp0 {
/* Major Minor Substrate */
/* 2 all all */
opp-supported-hw = <0x00000004 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1500000000>;
clock-latency-ns = <10000000>;
opp-microvolt-pcode0 = <1200000>;
opp-microvolt-pcode1 = <1200000>;
opp-microvolt-pcode2 = <1200000>;
opp-microvolt-pcode3 = <1200000>;
opp-microvolt-pcode4 = <1170000>;
opp-microvolt-pcode5 = <1140000>;
opp-microvolt-pcode6 = <1100000>;
opp-microvolt-pcode7 = <1070000>;
};
opp1 {
/* Major Minor Substrate */
/* all all all */
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1200000000>;
clock-latency-ns = <10000000>;
opp-microvolt-pcode0 = <1110000>;
opp-microvolt-pcode1 = <1150000>;
opp-microvolt-pcode2 = <1100000>;
opp-microvolt-pcode3 = <1080000>;
opp-microvolt-pcode4 = <1040000>;
opp-microvolt-pcode5 = <1020000>;
opp-microvolt-pcode6 = <980000>;
opp-microvolt-pcode7 = <930000>;
};
};

29
Documentation/devicetree/bindings/crypto/rockchip-crypto.txt Normal file
View File

@ -0,0 +1,29 @@
Rockchip Electronics And Security Accelerator
Required properties:
- compatible: Should be "rockchip,rk3288-crypto"
- reg: Base physical address of the engine and length of memory mapped
region
- interrupts: Interrupt number
- clocks: Reference to the clocks about crypto
- clock-names: "aclk" used to clock data
"hclk" used to clock data
"sclk" used to clock crypto accelerator
"apb_pclk" used to clock dma
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the name "crypto-rst".
Examples:
crypto: cypto-controller@ff8a0000 {
compatible = "rockchip,rk3288-crypto";
reg = <0xff8a0000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
<&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
resets = <&cru SRST_CRYPTO>;
reset-names = "crypto-rst";
status = "okay";
};

2
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt → Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
View File

@ -4,7 +4,7 @@ Allwinner Sunxi NMI Controller
Required properties:
- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
"allwinner,sun6i-a31-sc-nmi"
"allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an

1
Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
View File

@ -18,6 +18,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,gic-400"
"arm,pl390"
"arm,tc11mp-gic"
"brcm,brahma-b15-gic"
"qcom,msm-8660-qgic"
"qcom,msm-qgic2"

74
Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt Normal file
View File

@ -0,0 +1,74 @@
Hisilicon mbigen device tree bindings.
=======================================
Mbigen means: message based interrupt generator.
MBI is kind of msi interrupt only used on Non-PCI devices.
To reduce the wired interrupt number connected to GIC,
Hisilicon designed mbigen to collect and generate interrupt.
Non-pci devices can connect to mbigen and generate the
interrupt by writing ITS register.
The mbigen chip and devices connect to mbigen have the following properties:
Mbigen main node required properties:
-------------------------------------------
- compatible: Should be "hisilicon,mbigen-v2"
- reg: Specifies the base physical address and size of the Mbigen
registers.
- interrupt controller: Identifies the node as an interrupt controller
- msi-parent: Specifies the MSI controller this mbigen use.
For more detail information,please refer to the generic msi-parent binding in
Documentation/devicetree/bindings/interrupt-controller/msi.txt.
- num-pins: the total number of pins implemented in this Mbigen
instance.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 2.
The 1st cell is hardware pin number of the interrupt.This number is local to
each mbigen chip and in the range from 0 to the maximum interrupts number
of the mbigen.
The 2nd cell is the interrupt trigger type.
The value of this cell should be:
1: rising edge triggered
or
4: high level triggered
Examples:
mbigen_device_gmac:intc {
compatible = "hisilicon,mbigen-v2";
reg = <0x0 0xc0080000 0x0 0x10000>;
interrupt-controller;
msi-parent = <&its_dsa 0x40b1c>;
num-pins = <9>;
#interrupt-cells = <2>;
};
Devices connect to mbigen required properties:
----------------------------------------------------
-interrupt-parent: Specifies the mbigen device node which device connected.
-interrupts:Specifies the interrupt source.
For the specific information of each cell in this property,please refer to
the "interrupt-cells" description mentioned above.
Examples:
gmac0: ethernet@c2080000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xc2080000 0 0x20000>,
<0 0xc0000000 0 0x1000>;
interrupt-parent = <&mbigen_device_gmac>;
interrupts = <656 1>,
<657 1>;
};

16
Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt Normal file
View File

@ -0,0 +1,16 @@
TS-4800 FPGA interrupt controller
TS-4800 FPGA has an internal interrupt controller. When one of the
interrupts is triggered, the SoC is notified, usually using a GPIO as
parent interrupt source.
Required properties:
- compatible: should be "technologic,ts4800-irqc"
- interrupt-controller: identifies the node as an interrupt controller
- reg: physical base address of the controller and length of memory mapped
region
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
- interrupt-parent: phandle to the parent interrupt controller this one is
cascaded from
- interrupts: specifies the interrupt line in the interrupt-parent controller

20
Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
View File

@ -35,7 +35,7 @@ Required properties (tsin (child) node):
- tsin-num : tsin id of the InputBlock (must be between 0 to 6)
- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
- rst-gpio : reset gpio for this tsin channel.
- reset-gpios : reset gpio for this tsin channel.
Optional properties (tsin (child) node):
@ -55,27 +55,27 @@ Example:
status = "okay";
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
reg-names = "stfe", "stfe-ram";
interrupts = <0 34 0>, <0 35 0>;
interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
interrupt-names = "stfe-error-irq", "stfe-idle-irq";
pinctrl-names = "tsin0-serial", "tsin0-parallel", "tsin3-serial",
"tsin4-serial", "tsin5-serial";
pinctrl-0 = <&pinctrl_tsin0_serial>;
pinctrl-1 = <&pinctrl_tsin0_parallel>;
pinctrl-2 = <&pinctrl_tsin3_serial>;
pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
pinctrl-names = "tsin0-serial",
"tsin0-parallel",
"tsin3-serial",
"tsin4-serial",
"tsin5-serial";
clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
clock-names = "stfe";
clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
tsin0: port@0 {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
rst-gpio = <&pio15 4 0>;
reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
@ -83,7 +83,7 @@ Example:
tsin-num = <3>;
serial-not-parallel;
i2c-bus = <&ssc3>;
rst-gpio = <&pio15 7 0>;
reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMB_1>;
};
};

1
Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
View File

@ -11,6 +11,7 @@ Required properties:
- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
- "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs
- "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
- clocks: reference to the functional clock

3
Documentation/devicetree/bindings/net/dsa/dsa.txt
View File

@ -31,6 +31,8 @@ A switch child node has the following optional property:
switch. Must be set if the switch can not detect
the presence and/or size of a connected EEPROM,
otherwise optional.
- reset-gpios : phandle and specifier to a gpio line connected to
reset pin of the switch chip.
A switch may have multiple "port" children nodes
@ -114,6 +116,7 @@ Example:
#size-cells = <0>;
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
mii-bus = <&mii_bus1>;
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
switch1port0: port@0 {
reg = <0>;

7
Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
View File

@ -1,7 +1,12 @@
Hisilicon MDIO bus controller
Properties:
- compatible: "hisilicon,mdio","hisilicon,hns-mdio".
- compatible: can be one of:
"hisilicon,hns-mdio"
"hisilicon,mdio"
"hisilicon,hns-mdio" is recommended to be used for hip05 and later SOCs,
while "hisilicon,mdio" is optional for backwards compatibility only on
hip04 Soc.
- reg: The base address of the MDIO bus controller register bank.
- #address-cells: Must be <1>.
- #size-cells: Must be <0>. MDIO addresses have no size component.

18
Documentation/devicetree/bindings/net/ieee802154/adf7242.txt Normal file
View File

@ -0,0 +1,18 @@
* ADF7242 IEEE 802.15.4 *
Required properties:
- compatible: should be "adi,adf7242"
- spi-max-frequency: maximal bus speed (12.5 MHz)
- reg: the chipselect index
- interrupts: the interrupt generated by the device via pin IRQ1.
IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
Example:
adf7242@0 {
compatible = "adi,adf7242";
spi-max-frequency = <10000000>;
reg = <0>;
interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio3>;
};

8
Documentation/devicetree/bindings/net/macb.txt
View File

@ -4,6 +4,7 @@ Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
available on sama5d3 SoCs.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
@ -19,6 +20,9 @@ Required properties:
Optional elements: 'tx_clk'
- clocks: Phandles to input clocks.
Optional properties for PHY child node:
- reset-gpios : Should specify the gpio for phy reset
Examples:
macb0: ethernet@fffc4000 {
@ -29,4 +33,8 @@ Examples:
local-mac-address = [3a 0e 03 04 05 06];
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
ethernet-phy@1 {
reg = <0x1>;
reset-gpios = <&pioE 6 1>;
};
};

17
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
View File

@ -1,8 +1,9 @@
Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
Some boards require special tuning values, particularly when it comes to
clock delays. You can specify clock delay values by adding
micrel-specific properties to an Ethernet OF device node.
Some boards require special tuning values, particularly when it comes
to clock delays. You can specify clock delay values in the PHY OF
device node. Deprecated, but still supported, these properties can
also be added to an Ethernet OF device node.
Note that these settings are applied after any phy-specific fixup from
phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
@ -57,16 +58,6 @@ KSZ9031:
Examples:
/* Attach to an Ethernet device with autodetected PHY */
&enet {
rxc-skew-ps = <3000>;
rxdv-skew-ps = <0>;
txc-skew-ps = <3000>;
txen-skew-ps = <0>;
status = "okay";
};
/* Attach to an explicitly-specified PHY */
mdio {
phy0: ethernet-phy@0 {
rxc-skew-ps = <3000>;

50
Documentation/devicetree/bindings/net/nfc/st95hf.txt Normal file
View File

@ -0,0 +1,50 @@
* STMicroelectronics : NFC Transceiver ST95HF
ST NFC Transceiver is required to attach with SPI bus.
ST95HF node should be defined in DT as SPI slave device of SPI
master with which ST95HF transceiver is physically connected.
The properties defined below are required to be the part of DT
to include ST95HF transceiver into the platform.
Required properties:
===================
- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
- compatible: should be "st,st95hf" for ST95HF NFC transceiver
- spi-max-frequency: Max. operating SPI frequency for ST95HF
transceiver.
- enable-gpio: GPIO line to enable ST95HF transceiver.
- interrupt-parent : Standard way to specify the controller to which
ST95HF transceiver's interrupt is routed.
- interrupts : Standard way to define ST95HF transceiver's out
interrupt.
Optional property:
=================
- st95hfvin-supply : This is an optional property. It contains a
phandle to ST95HF transceiver's regulator supply node in DT.
Example:
=======
spi@9840000 {
reg = <0x9840000 0x110>;
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&pio0 4>;
status = "okay";
st95hf@0{
reg = <0>;
compatible = "st,st95hf";
status = "okay";
spi-max-frequency = <1000000>;
enable-gpio = <&pio4 0>;
interrupt-parent = <&pio0>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
};
};

12
Documentation/devicetree/bindings/net/renesas,ravb.txt
View File

@ -5,8 +5,18 @@ interface contains.
Required properties:
- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC.
"renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC.
"renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC.
"renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
"renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface.
"renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: offset and length of (1) the register block and (2) the stream buffer.
- interrupts: A list of interrupt-specifiers, one for each entry in
interrupt-names.
@ -37,7 +47,7 @@ Optional properties:
Example:
ethernet@e6800000 {
compatible = "renesas,etheravb-r8a7795";
compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,

2
Documentation/devicetree/bindings/net/socfpga-dwmac.txt
View File

@ -11,6 +11,8 @@ Required properties:
designware version numbers documented in stmmac.txt
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, the register offset, and the register shift.
- altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
for ptp ref clk. This affects all emacs as the clock is common.
Optional properties:
altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if

25
Documentation/devicetree/bindings/net/stmmac.txt
View File

@ -35,18 +35,18 @@ Optional properties:
- reset-names: Should contain the reset signal name "stmmaceth", if a
reset phandle is given
- max-frame-size: See ethernet.txt file in the same directory
- clocks: If present, the first clock should be the GMAC main clock and
the second clock should be peripheral's register interface clock. Further
clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth" and the second one should be "pclk".
- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
available this clock is used for programming the Timestamp Addend Register.
If not passed then the system clock will be used and this is fine on some
platforms.
- clocks: If present, the first clock should be the GMAC main clock
The optional second clock should be peripheral's register interface clock.
The third optional clock should be the ptp reference clock.
Further clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property.
The first one should be "stmmaceth".
The optional second one should be "pclk".
The optional third one should be "clk_ptp_ref".
- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
- tx-fifo-depth: See ethernet.txt file in the same directory
- rx-fifo-depth: See ethernet.txt file in the same directory
- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
Examples:
@ -65,4 +65,11 @@ Examples:
tx-fifo-depth = <16384>;
clocks = <&clock>;
clock-names = "stmmaceth";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy1: ethernet-phy@0 {
};
};
};

150
Documentation/devicetree/bindings/opp/opp.txt
View File

@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
phandle to a OPP table in their DT node. The OPP core will use this phandle to
find the operating points for the device.
Devices may want to choose OPP tables at runtime and so can provide a list of
phandles here. But only *one* of them should be chosen at runtime. This must be
accompanied by a corresponding "operating-points-names" property, to uniquely
identify the OPP tables.
If required, this can be extended for SoC vendor specfic bindings. Such bindings
should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
and should have a compatible description like: "operating-points-v2-<vendor>".
Optional properties:
- operating-points-names: Names of OPP tables (required if multiple OPP
tables are present), to uniquely identify them. The same list must be present
for all the CPUs which are sharing clock/voltage rails and hence the OPP
tables.
* OPP Table Node
This describes the OPPs belonging to a device. This node can have following
@ -100,6 +89,14 @@ Optional properties:
Entries for multiple regulators must be present in the same order as
regulators are specified in device's DT node.
- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
the above opp-microvolt property, but allows multiple voltage ranges to be
provided for the same OPP. At runtime, the platform can pick a <name> and
matching opp-microvolt-<name> property will be enabled for all OPPs. If the
platform doesn't pick a specific <name> or the <name> doesn't match with any
opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
present.
- opp-microamp: The maximum current drawn by the device in microamperes
considering system specific parameters (such as transients, process, aging,
maximum operating temperature range etc.) as necessary. This may be used to
@ -112,6 +109,9 @@ Optional properties:
for few regulators, then this should be marked as zero for them. If it isn't
required for any regulator, then this property need not be present.
- opp-microamp-<name>: Named opp-microamp property. Similar to
opp-microvolt-<name> property, but for microamp instead.
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
@ -123,6 +123,26 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
- opp-supported-hw: This enables us to select only a subset of OPPs from the
larger OPP table, based on what version of the hardware we are running on. We
still can't have multiple nodes with the same opp-hz value in OPP table.
It's an user defined array containing a hierarchy of hardware version numbers,
supported by the OPP. For example: a platform with hierarchy of three levels
of versions (A, B and C), this field should be like <X Y Z>, where X
corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
corresponds to version hierarchy C.
Each level of hierarchy is represented by a 32 bit value, and so there can be
only 32 different supported version per hierarchy. i.e. 1 bit per version. A
value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
level. And a value of 0x00000000 will disable the OPP completely, and so we
never want that to happen.
If 32 values aren't sufficient for a version hierarchy, than that version
hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
above example, Z1 & Z2 refer to the version hierarchy Z.
- status: Marks the node enabled/disabled.
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
@ -236,20 +256,20 @@ independently.
* independently.
*/
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
@ -312,20 +332,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
@ -338,20 +358,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
opp10 {
opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
opp11 {
opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
opp12 {
opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
@ -391,7 +411,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@ -404,7 +424,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
};
};
Example 5: Multiple OPP tables
Example 5: opp-supported-hw
(example: three level hierarchy of versions: cuts, substrate and process)
/ {
cpus {
@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
...
cpu-supply = <&cpu_supply>
operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
operating-points-names = "slow", "fast";
operating-points-v2 = <&cpu0_opp_table_slow>;
};
};
cpu0_opp_table_slow: opp_table_slow {
opp_table {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
opp00 {
opp@600000000 {
/*
* Supports all substrate and process versions for 0xF
* cuts, i.e. only first four cuts.
*/
opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000 915000 925000>;
...
};
opp01 {
opp@800000000 {
/*
* Supports:
* - cuts: only one, 6th cut (represented by 6th bit).
* - substrate: supports 16 different substrate versions
* - process: supports 9 different process versions
*/
opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
opp-hz = /bits/ 64 <800000000>;
...
};
};
cpu0_opp_table_fast: opp_table_fast {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
opp10 {
opp-hz = /bits/ 64 <1000000000>;
...
};
opp11 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <900000 915000 925000>;
...
};
};
};
Example 6: opp-microvolt-<name>, opp-microamp-<name>:
(example: device with two possible microvolt ranges: slow and fast)
/ {
cpus {
cpu@0 {
compatible = "arm,cortex-a7";
...
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt-slow = <900000 915000 925000>;
opp-microvolt-fast = <970000 975000 985000>;
opp-microamp-slow = <70000>;
opp-microamp-fast = <71000>;
};
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
<910000 925000 935000>; /* Supply vcc1 */
opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
<960000 965000 975000>; /* Supply vcc1 */
opp-microamp = <70000>; /* Will be used for both slow/fast */
};
};
};

3
Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
View File

@ -17,7 +17,10 @@ Required properties:
"allwinner,sun8i-a23-pinctrl"
"allwinner,sun8i-a23-r-pinctrl"
"allwinner,sun8i-a33-pinctrl"
"allwinner,sun9i-a80-pinctrl"
"allwinner,sun9i-a80-r-pinctrl"
"allwinner,sun8i-a83t-pinctrl"
"allwinner,sun8i-h3-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.

9
Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt → Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
View File

@ -1,4 +1,4 @@
Broadcom Cygnus GPIO/PINCONF Controller
Broadcom iProc GPIO/PINCONF Controller
Required properties:
@ -7,9 +7,12 @@ Required properties:
"brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
- reg:
Define the base and range of the I/O address space that contains the Cygnus
Define the base and range of the I/O address space that contains SoC
GPIO/PINCONF controller registers
- ngpios:
Total number of in-use slots in GPIO controller
- #gpio-cells:
Must be two. The first cell is the GPIO pin number (within the
controller's pin space) and the second cell is used for the following:
@ -57,6 +60,7 @@ Example:
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
ngpios = <24>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@ -78,6 +82,7 @@ Example:
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
ngpios = <146>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;

80
Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt Normal file
View File

@ -0,0 +1,80 @@
Broadcom Northstar plus (NSP) GPIO/PINCONF Controller
Required properties:
- compatible:
Must be "brcm,nsp-gpio-a"
- reg:
Should contain the register physical address and length for each of
GPIO base, IO control registers
- #gpio-cells:
Must be two. The first cell is the GPIO pin number (within the
controller's pin space) and the second cell is used for the following:
bit[0]: polarity (0 for active high and 1 for active low)
- gpio-controller:
Specifies that the node is a GPIO controller
- ngpios:
Number of gpios supported (58x25 supports 32 and 58x23 supports 24)
Optional properties:
- interrupts:
Interrupt ID
- interrupt-controller:
Specifies that the node is an interrupt controller
- gpio-ranges:
Specifies the mapping between gpio controller and pin-controllers pins.
This requires 4 fields in cells defined as -
1. Phandle of pin-controller.
2. GPIO base pin offset.
3 Pin-control base pin offset.
4. number of gpio pins which are linearly mapped from pin base.
Supported generic PINCONF properties in child nodes:
- pins:
The list of pins (within the controller's own pin space) that properties
in the node apply to. Pin names are "gpio-<pin>"
- bias-disable:
Disable pin bias
- bias-pull-up:
Enable internal pull up resistor
- bias-pull-down:
Enable internal pull down resistor
- drive-strength:
Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
Example:
gpioa: gpio@18000020 {
compatible = "brcm,nsp-gpio-a";
reg = <0x18000020 0x100>,
<0x1803f1c4 0x1c>;
#gpio-cells = <2>;
gpio-controller;
ngpios = <32>;
gpio-ranges = <&pinctrl 0 0 31>;
interrupt-controller;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
/* Hog a few default settings */
pinctrl-names = "default";
pinctrl-0 = <&led>;
led: led {
pins = "gpio-1";
bias-pull-up;
};
pwr: pwr {
gpio-hog;
gpios = <3 1>;
output-high;
};
};

110
Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
View File

@ -1,7 +1,16 @@
Lantiq XWAY pinmux controller
Required properties:
- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube")
"lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or
"lantiq,xrx200-pinctrl")
"lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl")
"lantiq,<chip>-pinctrl", where <chip> is:
"ase" (XWAY AMAZON Family)
"danube" (XWAY DANUBE Family)
"xrx100" (XWAY xRX100 Family)
"xrx200" (XWAY xRX200 Family)
"xrx300" (XWAY xRX300 Family)
- reg: Should contain the physical address and length of the gpio/pinmux
register range
@ -36,19 +45,87 @@ Required subnode-properties:
Valid values for group and function names:
XWAY: (DEPRECATED: Use DANUBE)
mux groups:
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2,
gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
req3
additional mux groups (XR9 only):
mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
functions:
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
XR9: ( DEPRECATED: Use xRX100/xRX200)
mux groups:
exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25,
ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
functions:
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
AMAZON:
mux groups:
exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
functions:
spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
DANUBE:
mux groups:
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
req1, req2, req3, dfe led0, dfe led1
functions:
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
xRX100:
mux groups:
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
dfe led0, dfe led1
functions:
spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
xRX200:
mux groups:
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
functions:
spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
xRX300:
mux groups:
exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
functions:
spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
Definition of pin configurations:
@ -62,15 +139,32 @@ Optional subnode-properties:
0: none, 1: down, 2: up.
- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
Valid values for XWAY pin names:
Valid values for XWAY pin names: (DEPRECATED: Use DANUBE)
Pinconf pins can be referenced via the names io0-io31.
Valid values for XR9 pin names:
Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200)
Pinconf pins can be referenced via the names io0-io55.
Valid values for AMAZON pin names:
Pinconf pins can be referenced via the names io0-io31.
Valid values for DANUBE pin names:
Pinconf pins can be referenced via the names io0-io31.
Valid values for xRX100 pin names:
Pinconf pins can be referenced via the names io0-io55.
Valid values for xRX200 pin names:
Pinconf pins can be referenced via the names io0-io49.
Valid values for xRX300 pin names:
Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
io13-io19,io23-io27,io34-io36,
io42-io43,io48-io61.
Example:
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;

9
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
View File

@ -4,10 +4,11 @@ The Mediatek's Pin controller is used to control SoC pins.
Required properties:
- compatible: value should be one of the following.
(a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
(b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
(c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
(d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
"mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
"mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
- pins-are-numbered: Specify the subnodes are using numbered pinmux to
specify pins.
- gpio-controller : Marks the device node as a gpio controller.

199
Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt Normal file
View File

@ -0,0 +1,199 @@
Qualcomm MSM8996 TLMM block
This binding describes the Top Level Mode Multiplexer block found in the
MSM8996 platform.
- compatible:
Usage: required
Value type: <string>
Definition: must be "qcom,msm8996-pinctrl"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: the base address and size of the TLMM register space.
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: should specify the TLMM summary IRQ.
- interrupt-controller:
Usage: required
Value type: <none>
Definition: identifies this node as an interrupt controller
- #interrupt-cells:
Usage: required
Value type: <u32>
Definition: must be 2. Specifying the pin number and flags, as defined
in <dt-bindings/interrupt-controller/irq.h>
- gpio-controller:
Usage: required
Value type: <none>
Definition: identifies this node as a gpio controller
- #gpio-cells:
Usage: required
Value type: <u32>
Definition: must be 2. Specifying the pin number and flags, as defined
in <dt-bindings/gpio/gpio.h>
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
a general description of GPIO and interrupt bindings.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, drive strength, etc.
PIN CONFIGURATION NODES:
The name of each subnode is not important; all subnodes should be enumerated
and processed purely based on their content.
Each subnode only affects those parameters that are explicitly listed. In
other words, a subnode that lists a mux function but no pin configuration
parameters implies no information about any pin configuration parameters.
Similarly, a pin subnode that describes a pullup parameter implies no
information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins:
Usage: required
Value type: <string-array>
Definition: List of gpio pins affected by the properties specified in
this subnode.
Valid pins are:
gpio0-gpio149
Supports mux, bias and drive-strength
sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
sdc2_data sdc1_rclk
Supports bias and drive-strength
- function:
Usage: required
Value type: <string>
Definition: Specify the alternative function to be configured for the
specified pins. Functions are only valid for gpio pins.
Valid values are:
blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
atest_usb20, atest_char0, dac_calib10, qdss_stm10,
qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
gpio
- bias-disable:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as pull up.
- output-high:
Usage: optional
Value type: <none>
Definition: The specified pins are configured in output mode, driven
high.
Not valid for sdc pins.
- output-low:
Usage: optional
Value type: <none>
Definition: The specified pins are configured in output mode, driven
low.
Not valid for sdc pins.
- drive-strength:
Usage: optional
Value type: <u32>
Definition: Selects the drive strength for the specified pins, in mA.
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
Example:
tlmm: pinctrl@01010000 {
compatible = "qcom,msm8996-pinctrl";
reg = <0x01010000 0x300000>;
interrupts = <0 208 0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
uart_console_active: uart_console_active {
mux {
pins = "gpio4", "gpio5";
function = "blsp_uart8";
};
config {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-disable;
};
};
};

2
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
View File

@ -14,6 +14,7 @@ PMIC's from Qualcomm.
"qcom,pm8917-gpio"
"qcom,pm8921-gpio"
"qcom,pm8941-gpio"
"qcom,pm8994-gpio"
"qcom,pma8084-gpio"
- reg:
@ -79,6 +80,7 @@ to specify in a pin configuration subnode:
gpio1-gpio38 for pm8917
gpio1-gpio44 for pm8921
gpio1-gpio36 for pm8941
gpio1-gpio22 for pm8994
gpio1-gpio22 for pma8084
- function:

1
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
View File

@ -15,6 +15,7 @@ of PMIC's from Qualcomm.
"qcom,pm8917-mpp",
"qcom,pm8921-mpp",
"qcom,pm8941-mpp",
"qcom,pm8994-mpp",
"qcom,pma8084-mpp",
- reg:

3
Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
View File

@ -21,7 +21,8 @@ defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
"rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
"rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl"
"rockchip,rk3368-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"

1
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
View File

@ -17,6 +17,7 @@ Required Properties:
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
- "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
- "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
- "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
- "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.

4
Documentation/dvb/README.dvb-usb
View File

@ -45,7 +45,7 @@ Supported devices
See the LinuxTV DVB Wiki at www.linuxtv.org for a complete list of
cards/drivers/firmwares:
http://www.linuxtv.org/wiki/index.php/DVB_USB
https://linuxtv.org/wiki/index.php/DVB_USB
0. History & News:
2005-06-30 - added support for WideView WT-220U (Thanks to Steve Chang)
@ -121,7 +121,7 @@ working.
Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
you need for your device:
http://www.linuxtv.org/wiki/index.php/DVB_USB
https://linuxtv.org/wiki/index.php/DVB_USB
1.2. Compiling

2
Documentation/dvb/faq.txt
View File

@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
the TuxBox CVS many interesting DVB applications and the dBox2
DVB source
http://www.linuxtv.org/downloads/
https://linuxtv.org/downloads
DVB Swiss Army Knife library and utilities
http://www.nenie.org/misc/mpsys/

22
Documentation/dvb/get_dvb_firmware
View File

@ -152,7 +152,7 @@ sub tda10046lifeview {
sub av7110 {
my $sourcefile = "dvb-ttpci-01.fw-261d";
my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";
my $url = "https://linuxtv.org/downloads/firmware/$sourcefile";
my $hash = "603431b6259715a8e88f376a53b64e2f";
my $outfile = "dvb-ttpci-01.fw";
@ -303,7 +303,7 @@ sub vp7049 {
}
sub dibusb {
my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
my $url = "https://linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
my $outfile = "dvb-dibusb-5.0.0.11.fw";
my $hash = "fa490295a527360ca16dcdf3224ca243";
@ -351,7 +351,7 @@ sub nxt2004 {
sub or51211 {
my $fwfile = "dvb-fe-or51211.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
my $hash = "d830949c771a289505bf9eafc225d491";
checkstandard();
@ -364,7 +364,7 @@ sub or51211 {
sub cx231xx {
my $fwfile = "v4l-cx231xx-avcore-01.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";
checkstandard();
@ -376,7 +376,7 @@ sub cx231xx {
}
sub cx18 {
my $url = "http://linuxtv.org/downloads/firmware/";
my $url = "https://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
@ -450,7 +450,7 @@ sub mpc718 {
}
sub cx23885 {
my $url = "http://linuxtv.org/downloads/firmware/";
my $url = "https://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
@ -472,7 +472,7 @@ sub cx23885 {
}
sub pvrusb2 {
my $url = "http://linuxtv.org/downloads/firmware/";
my $url = "https://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx25840.fw' => 'dadb79e9904fc8af96e8111d9cb59320',
@ -494,7 +494,7 @@ sub pvrusb2 {
sub or51132_qam {
my $fwfile = "dvb-fe-or51132-qam.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
my $hash = "7702e8938612de46ccadfe9b413cb3b5";
checkstandard();
@ -507,7 +507,7 @@ sub or51132_qam {
sub or51132_vsb {
my $fwfile = "dvb-fe-or51132-vsb.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
my $hash = "c16208e02f36fc439a557ad4c613364a";
checkstandard();
@ -519,7 +519,7 @@ sub or51132_vsb {
}
sub bluebird {
my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
my $url = "https://linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
my $outfile = "dvb-usb-bluebird-01.fw";
my $hash = "658397cb9eba9101af9031302671f49d";
@ -677,7 +677,7 @@ sub drxk_hauppauge_hvr930c {
}
sub drxk_terratec_h5 {
my $url = "http://www.linuxtv.org/downloads/firmware/";
my $url = "https://linuxtv.org/downloads/firmware/";
my $hash = "19000dada8e2741162ccc50cc91fa7f1";
my $fwfile = "dvb-usb-terratec-h5-drxk.fw";

10
Documentation/dvb/readme.txt
View File

@ -2,12 +2,12 @@ Linux Digital Video Broadcast (DVB) subsystem
=============================================
The main development site and CVS repository for these
drivers is http://linuxtv.org/.
drivers is https://linuxtv.org.
The developer mailing list linux-dvb is also hosted there,
see http://linuxtv.org/lists.php. Please check
the archive http://linuxtv.org/pipermail/linux-dvb/
and the Wiki http://linuxtv.org/wiki/
see https://linuxtv.org/lists.php. Please check
the archive https://linuxtv.org/pipermail/linux-dvb/
and the Wiki https://linuxtv.org/wiki/
before asking newbie questions on the list.
API documentation, utilities and test/example programs
@ -16,7 +16,7 @@ are available as part of the old driver package for Linux 2.4
We plan to split this into separate packages, but it's not
been done yet.
http://linuxtv.org/downloads/
https://linuxtv.org/downloads/
What's inside this directory:

10
Documentation/edac.txt
View File

@ -1,9 +1,13 @@
EDAC - Error Detection And Correction
=====================================
"bluesmoke" was the name for this device driver when it was "out-of-tree"
and maintained at sourceforge.net. When it was pushed into 2.6.16 for the
first time, it was renamed to 'EDAC'.
"bluesmoke" was the name for this device driver when it
was "out-of-tree" and maintained at sourceforge.net -
bluesmoke.sourceforge.net. That site is mostly archaic now and can be
used only for historical purposes.
When the subsystem was pushed into 2.6.16 for the first time, it was
renamed to 'EDAC'.
PURPOSE
-------

25
Documentation/fault-injection/notifier-error-inject.txt
View File

@ -10,6 +10,7 @@ modules that can be used to test the following notifiers.
* PM notifier
* Memory hotplug notifier
* powerpc pSeries reconfig notifier
* Netdevice notifier
CPU notifier error injection module
-----------------------------------
@ -87,6 +88,30 @@ Possible pSeries reconfig notifier events to be failed are:
* PSERIES_DRCONF_MEM_ADD
* PSERIES_DRCONF_MEM_REMOVE
Netdevice notifier error injection module
----------------------------------------------
This feature is controlled through debugfs interface
/sys/kernel/debug/notifier-error-inject/netdev/actions/<notifier event>/error
Netdevice notifier events which can be failed are:
* NETDEV_REGISTER
* NETDEV_CHANGEMTU
* NETDEV_CHANGENAME
* NETDEV_PRE_UP
* NETDEV_PRE_TYPE_CHANGE
* NETDEV_POST_INIT
* NETDEV_PRECHANGEMTU
* NETDEV_PRECHANGEUPPER
* NETDEV_CHANGEUPPER
Example: Inject netdevice mtu change error (-22 == -EINVAL)
# cd /sys/kernel/debug/notifier-error-inject/netdev
# echo -22 > actions/NETDEV_CHANGEMTU/error
# ip link set eth0 mtu 1024
RTNETLINK answers: Invalid argument
For more usage examples
-----------------------
There are tools/testing/selftests using the notifier error injection features

2
Documentation/features/seccomp/seccomp-filter/arch-support.txt
View File

@ -33,7 +33,7 @@
| sh: | TODO |
| sparc: | TODO |
| tile: | ok |
| um: | TODO |
| um: | ok |
| unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |

2
Documentation/features/time/irq-time-acct/arch-support.txt
View File

@ -9,7 +9,7 @@
| alpha: | .. |
| arc: | TODO |
| arm: | ok |
| arm64: | .. |
| arm64: | ok |
| avr32: | TODO |
| blackfin: | TODO |
| c6x: | TODO |

6
Documentation/filesystems/Locking
View File

@ -50,8 +50,7 @@ prototypes:
int (*rename2) (struct inode *, struct dentry *,
struct inode *, struct dentry *, unsigned int);
int (*readlink) (struct dentry *, char __user *,int);
const char *(*follow_link) (struct dentry *, void **);
void (*put_link) (struct inode *, void *);
const char *(*get_link) (struct dentry *, struct inode *, void **);
void (*truncate) (struct inode *);
int (*permission) (struct inode *, int, unsigned int);
int (*get_acl)(struct inode *, int);
@ -83,8 +82,7 @@ rmdir: yes (both) (see below)
rename: yes (all) (see below)
rename2: yes (all) (see below)
readlink: no
follow_link: no
put_link: no
get_link: no
setattr: yes
permission: no (may not block if called in rcu-walk mode)
get_acl: no

55
Documentation/filesystems/configfs/configfs.txt
View File

@ -51,15 +51,27 @@ configfs tree is always there, whether mounted on /config or not.
An item is created via mkdir(2). The item's attributes will also
appear at this time. readdir(3) can determine what the attributes are,
read(2) can query their default values, and write(2) can store new
values. Like sysfs, attributes should be ASCII text files, preferably
with only one value per file. The same efficiency caveats from sysfs
apply. Don't mix more than one attribute in one attribute file.
values. Don't mix more than one attribute in one attribute file.
Like sysfs, configfs expects write(2) to store the entire buffer at
once. When writing to configfs attributes, userspace processes should
first read the entire file, modify the portions they wish to change, and
then write the entire buffer back. Attribute files have a maximum size
of one page (PAGE_SIZE, 4096 on i386).
There are two types of configfs attributes:
* Normal attributes, which similar to sysfs attributes, are small ASCII text
files, with a maximum size of one page (PAGE_SIZE, 4096 on i386). Preferably
only one value per file should be used, and the same caveats from sysfs apply.
Configfs expects write(2) to store the entire buffer at once. When writing to
normal configfs attributes, userspace processes should first read the entire
file, modify the portions they wish to change, and then write the entire
buffer back.
* Binary attributes, which are somewhat similar to sysfs binary attributes,
but with a few slight changes to semantics. The PAGE_SIZE limitation does not
apply, but the whole binary item must fit in single kernel vmalloc'ed buffer.
The write(2) calls from user space are buffered, and the attributes'
write_bin_attribute method will be invoked on the final close, therefore it is
imperative for user-space to check the return code of close(2) in order to
verify that the operation finished successfully.
To avoid a malicious user OOMing the kernel, there's a per-binary attribute
maximum buffer value.
When an item needs to be destroyed, remove it with rmdir(2). An
item cannot be destroyed if any other item has a link to it (via
@ -171,6 +183,7 @@ among other things. For that, it needs a type.
struct configfs_item_operations *ct_item_ops;
struct configfs_group_operations *ct_group_ops;
struct configfs_attribute **ct_attrs;
struct configfs_bin_attribute **ct_bin_attrs;
};
The most basic function of a config_item_type is to define what
@ -201,6 +214,32 @@ be called whenever userspace asks for a read(2) on the attribute. If an
attribute is writable and provides a ->store method, that method will be
be called whenever userspace asks for a write(2) on the attribute.
[struct configfs_bin_attribute]
struct configfs_attribute {
struct configfs_attribute cb_attr;
void *cb_private;
size_t cb_max_size;
};
The binary attribute is used when the one needs to use binary blob to
appear as the contents of a file in the item's configfs directory.
To do so add the binary attribute to the NULL-terminated array
config_item_type->ct_bin_attrs, and the item appears in configfs, the
attribute file will appear with the configfs_bin_attribute->cb_attr.ca_name
filename. configfs_bin_attribute->cb_attr.ca_mode specifies the file
permissions.
The cb_private member is provided for use by the driver, while the
cb_max_size member specifies the maximum amount of vmalloc buffer
to be used.
If binary attribute is readable and the config_item provides a
ct_item_ops->read_bin_attribute() method, that method will be called
whenever userspace asks for a read(2) on the attribute. The converse
will happen for write(2). The reads/writes are bufferred so only a
single read/write will occur; the attributes' need not concern itself
with it.
[struct config_group]
A config_item cannot live in a vacuum. The only way one can be created

17
Documentation/filesystems/porting
View File

@ -504,3 +504,20 @@ in your dentry operations instead.
[mandatory]
__fd_install() & fd_install() can now sleep. Callers should not
hold a spinlock or other resources that do not allow a schedule.
--
[mandatory]
any symlink that might use page_follow_link_light/page_put_link() must
have inode_nohighmem(inode) called before anything might start playing with
its pagecache.
--
[mandatory]
->follow_link() is replaced with ->get_link(); same API, except that
* ->get_link() gets inode as a separate argument
* ->get_link() may be called in RCU mode - in that case NULL
dentry is passed
--
[mandatory]
->get_link() gets struct delayed_call *done now, and should do
set_delayed_call() where it used to set *cookie.
->put_link() is gone - just give the destructor to set_delayed_call()
in ->get_link().

21
Documentation/filesystems/vfs.txt
View File

@ -350,8 +350,8 @@ struct inode_operations {
int (*rename2) (struct inode *, struct dentry *,
struct inode *, struct dentry *, unsigned int);
int (*readlink) (struct dentry *, char __user *,int);
const char *(*follow_link) (struct dentry *, void **);
void (*put_link) (struct inode *, void *);
const char *(*get_link) (struct dentry *, struct inode *,
struct delayed_call *);
int (*permission) (struct inode *, int);
int (*get_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
@ -434,20 +434,19 @@ otherwise noted.
readlink: called by the readlink(2) system call. Only required if
you want to support reading symbolic links
follow_link: called by the VFS to follow a symbolic link to the
get_link: called by the VFS to follow a symbolic link to the
inode it points to. Only required if you want to support
symbolic links. This method returns the symlink body
to traverse (and possibly resets the current position with
nd_jump_link()). If the body won't go away until the inode
is gone, nothing else is needed; if it needs to be otherwise
pinned, the data needed to release whatever we'd grabbed
is to be stored in void * variable passed by address to
follow_link() instance.
put_link: called by the VFS to release resources allocated by
follow_link(). The cookie stored by follow_link() is passed
to this method as the last parameter; only called when
cookie isn't NULL.
pinned, arrange for its release by having get_link(..., ..., done)
do set_delayed_call(done, destructor, argument).
In that case destructor(argument) will be called once VFS is
done with the body you've returned.
May be called in RCU mode; that is indicated by NULL dentry
argument. If request can't be handled without leaving RCU mode,
have it return ERR_PTR(-ECHILD).
permission: called by the VFS to check for access rights on a POSIX-like
filesystem.

46
Documentation/hwmon/htu21
View File

@ -1,46 +0,0 @@
Kernel driver htu21
===================
Supported chips:
* Measurement Specialties HTU21D
Prefix: 'htu21'
Addresses scanned: none
Datasheet: Publicly available at the Measurement Specialties website
http://www.meas-spec.com/downloads/HTU21D.pdf
Author:
William Markezana <william.markezana@meas-spec.com>
Description
-----------
The HTU21D is a humidity and temperature sensor in a DFN package of
only 3 x 3 mm footprint and 0.9 mm height.
The devices communicate with the I2C protocol. All sensors are set to the
same I2C address 0x40, so an entry with I2C_BOARD_INFO("htu21", 0x40) can
be used in the board setup code.
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices
for details.
sysfs-Interface
---------------
temp1_input - temperature input
humidity1_input - humidity input
Notes
-----
The driver uses the default resolution settings of 12 bit for humidity and 14
bit for temperature, which results in typical measurement times of 11 ms for
humidity and 44 ms for temperature. To keep self heating below 0.1 degree
Celsius, the device should not be active for more than 10% of the time. For
this reason, the driver performs no more than two measurements per second and
reports cached information if polled more frequently.
Different resolutions, the on-chip heater, using the CRC checksum and reading
the serial number are not supported yet.

61
Documentation/hwmon/ltc3815 Normal file
View File

@ -0,0 +1,61 @@
Kernel driver ltc3815
=====================
Supported chips:
* Linear Technology LTC3815
Prefix: 'ltc3815'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3815
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an LTC3815
at address 0x20 on I2C bus #1:
# modprobe ltc3815
# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs attributes
----------------
in1_label "vin"
in1_input Measured input voltage.
in1_alarm Input voltage alarm.
in1_highest Highest input voltage.
in1_reset_history Reset input voltage history.
in2_label "vout1".
in2_input Measured output voltage.
in2_alarm Output voltage alarm.
in2_highest Highest output voltage.
in2_reset_history Reset output voltage history.
temp1_input Measured chip temperature.
temp1_alarm Temperature alarm.
temp1_highest Highest measured temperature.
temp1_reset_history Reset temperature history.
curr1_label "iin".
curr1_input Measured input current.
curr1_highest Highest input current.
curr1_reset_history Reset input current history.
curr2_label "iout1".
curr2_input Measured output current.
curr2_alarm Output current alarm.
curr2_highest Highest output current.
curr2_reset_history Reset output current history.

43
Documentation/kernel-parameters.txt
View File

@ -472,6 +472,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Change the amount of debugging information output
when initialising the APIC and IO-APIC components.
apic_extnmi= [APIC,X86] External NMI delivery setting
Format: { bsp (default) | all | none }
bsp: External NMI is delivered only to CPU 0
all: External NMIs are broadcast to all CPUs as a
backup of CPU 0
none: External NMI is masked for all CPUs. This is
useful so that a dump capture kernel won't be
shot down by NMI
autoconf= [IPV6]
See Documentation/networking/ipv6.txt.
@ -3296,18 +3305,35 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rcutorture.verbose= [KNL]
Enable additional printk() statements.
rcupdate.rcu_cpu_stall_suppress= [KNL]
Suppress RCU CPU stall warning messages.
rcupdate.rcu_cpu_stall_timeout= [KNL]
Set timeout for RCU CPU stall warning messages.
rcupdate.rcu_expedited= [KNL]
Use expedited grace-period primitives, for
example, synchronize_rcu_expedited() instead
of synchronize_rcu(). This reduces latency,
but can increase CPU utilization, degrade
real-time latency, and degrade energy efficiency.
No effect on CONFIG_TINY_RCU kernels.
rcupdate.rcu_cpu_stall_suppress= [KNL]
Suppress RCU CPU stall warning messages.
rcupdate.rcu_normal= [KNL]
Use only normal grace-period primitives,
for example, synchronize_rcu() instead of
synchronize_rcu_expedited(). This improves
real-time latency, CPU utilization, and
energy efficiency, but can expose users to
increased grace-period latency. This parameter
overrides rcupdate.rcu_expedited. No effect on
CONFIG_TINY_RCU kernels.
rcupdate.rcu_cpu_stall_timeout= [KNL]
Set timeout for RCU CPU stall warning messages.
rcupdate.rcu_normal_after_boot= [KNL]
Once boot has completed (that is, after
rcu_end_inkernel_boot() has been invoked), use
only normal grace-period primitives. No effect
on CONFIG_TINY_RCU kernels.
rcupdate.rcu_task_stall_timeout= [KNL]
Set timeout in jiffies for RCU task stall warning
@ -4114,6 +4140,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
or other driver-specific files in the
Documentation/watchdog/ directory.
workqueue.watchdog_thresh=
If CONFIG_WQ_WATCHDOG is configured, workqueue can
warn stall conditions and dump internal state to
help debugging. 0 disables workqueue stall
detection; otherwise, it's the stall threshold
duration in seconds. The default value is 30 and
it can be updated at runtime by writing to the
corresponding sysfs file.
workqueue.disable_numa
By default, all work items queued to unbound
workqueues are affine to the NUMA nodes they're

13
Documentation/leds/leds-class.txt
View File

@ -52,6 +52,19 @@ above leaves scope for further attributes should they be needed. If sections
of the name don't apply, just leave that section blank.
Brightness setting API
======================
LED subsystem core exposes following API for setting brightness:
- led_set_brightness : it is guaranteed not to sleep, passing LED_OFF stops
blinking,
- led_set_brightness_sync : for use cases when immediate effect is desired -
it can block the caller for the time required for accessing
device registers and can sleep, passing LED_OFF stops hardware
blinking, returns -EBUSY if software blink fallback is enabled.
Hardware accelerated blink of LEDs
==================================

12
Documentation/memory-barriers.txt
View File

@ -194,7 +194,7 @@ There are some minimal guarantees that may be expected of a CPU:
(*) On any given CPU, dependent memory accesses will be issued in order, with
respect to itself. This means that for:
WRITE_ONCE(Q, P); smp_read_barrier_depends(); D = READ_ONCE(*Q);
Q = READ_ONCE(P); smp_read_barrier_depends(); D = READ_ONCE(*Q);
the CPU will issue the following memory operations:
@ -202,9 +202,9 @@ There are some minimal guarantees that may be expected of a CPU:
and always in that order. On most systems, smp_read_barrier_depends()
does nothing, but it is required for DEC Alpha. The READ_ONCE()
and WRITE_ONCE() are required to prevent compiler mischief. Please
note that you should normally use something like rcu_dereference()
instead of open-coding smp_read_barrier_depends().
is required to prevent compiler mischief. Please note that you
should normally use something like rcu_dereference() instead of
open-coding smp_read_barrier_depends().
(*) Overlapping loads and stores within a particular CPU will appear to be
ordered within that CPU. This means that for:
@ -1673,8 +1673,8 @@ There are some more advanced barrier functions:
(*) smp_store_mb(var, value)
This assigns the value to the variable and then inserts a full memory
barrier after it, depending on the function. It isn't guaranteed to
insert anything more than a compiler barrier in a UP compilation.
barrier after it. It isn't guaranteed to insert anything more than a
compiler barrier in a UP compilation.
(*) smp_mb__before_atomic();

9
Documentation/networking/batman-adv.txt
View File

@ -115,14 +115,17 @@ The "bat0" interface can be used like any other regular inter-
face. It needs an IP address which can be either statically con-
figured or dynamically (by using DHCP or similar services):
# NodeA: ifconfig bat0 192.168.0.1
# NodeB: ifconfig bat0 192.168.0.2
# NodeA: ip link set up dev bat0
# NodeA: ip addr add 192.168.0.1/24 dev bat0
# NodeB: ip link set up dev bat0
# NodeB: ip addr add 192.168.0.2/24 dev bat0
# NodeB: ping 192.168.0.1
Note: In order to avoid problems remove all IP addresses previ-
ously assigned to interfaces now used by batman advanced, e.g.
# ifconfig eth0 0.0.0.0
# ip addr flush dev eth0
LOGGING/DEBUGGING

31
Documentation/networking/ip-sysctl.txt
View File

@ -335,6 +335,14 @@ tcp_keepalive_intvl - INTEGER
after probes started. Default value: 75sec i.e. connection
will be aborted after ~11 minutes of retries.
tcp_l3mdev_accept - BOOLEAN
Enables child sockets to inherit the L3 master device index.
Enabling this option allows a "global" listen socket to work
across L3 master domains (e.g., VRFs) with connected sockets
derived from the listen socket to be bound to the L3 domain in
which the packets originated. Only valid when the kernel was
compiled with CONFIG_NET_L3_MASTER_DEV.
tcp_low_latency - BOOLEAN
If set, the TCP stack makes decisions that prefer lower
latency as opposed to higher throughput. By default, this
@ -1723,6 +1731,25 @@ addip_enable - BOOLEAN
Default: 0
pf_enable - INTEGER
Enable or disable pf (pf is short for potentially failed) state. A value
of pf_retrans > path_max_retrans also disables pf state. That is, one of
both pf_enable and pf_retrans > path_max_retrans can disable pf state.
Since pf_retrans and path_max_retrans can be changed by userspace
application, sometimes user expects to disable pf state by the value of
pf_retrans > path_max_retrans, but occasionally the value of pf_retrans
or path_max_retrans is changed by the user application, this pf state is
enabled. As such, it is necessary to add this to dynamically enable
and disable pf state. See:
https://datatracker.ietf.org/doc/draft-ietf-tsvwg-sctp-failover for
details.
1: Enable pf.
0: Disable pf.
Default: 1
addip_noauth_enable - BOOLEAN
Dynamic Address Reconfiguration (ADD-IP) requires the use of
authentication to protect the operations of adding or removing new
@ -1799,7 +1826,9 @@ pf_retrans - INTEGER
having to reduce path_max_retrans to a very low value. See:
http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt
for details. Note also that a value of pf_retrans > path_max_retrans
disables this feature
disables this feature. Since both pf_retrans and path_max_retrans can
be changed by userspace application, a variable pf_enable is used to
disable pf state.
Default: 0

8
Documentation/networking/switchdev.txt
View File

@ -304,8 +304,12 @@ certain netdevs from flooding unicast traffic for which there is no FDB entry.
IGMP Snooping
^^^^^^^^^^^^^
XXX: complete this section
In order to support IGMP snooping, the port netdevs should trap to the bridge
driver all IGMP join and leave messages.
The bridge multicast module will notify port netdevs on every multicast group
changed whether it is static configured or dynamically joined/leave.
The hardware implementation should be forwarding all registered multicast
traffic groups only to the configured ports.
L3 Routing Offload
------------------

2
Documentation/power/pci.txt
View File

@ -999,7 +999,7 @@ from its probe routine to make runtime PM work for the device.
It is important to remember that the driver's runtime_suspend() callback
may be executed right after the usage counter has been decremented, because
user space may already have cuased the pm_runtime_allow() helper function
user space may already have caused the pm_runtime_allow() helper function
unblocking the runtime PM of the device to run via sysfs, so the driver must
be prepared to cope with that.

6
Documentation/power/runtime_pm.txt
View File

@ -371,6 +371,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
- increment the device's usage counter, run pm_runtime_resume(dev) and
return its result
int pm_runtime_get_if_in_use(struct device *dev);
- return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
nonzero, increment the counter and return 1; otherwise return 0 without
changing the counter
void pm_runtime_put_noidle(struct device *dev);
- decrement the device's usage counter

Some files were not shown because too many files have changed in this diff Show More