spi: a3700: Change SPI mode before asserting chip-select
The spi device mode should be configured in the controller before the chip-select is asserted, so that a clock polarity configuration change is not interpreted as a clock tick by the device. This patch moves the mode setting to the 'prepare_message' function instead of the 'transfer_one' function. By doing so, this patch also removes redundant code in a3700_spi_clock_set. This was tested on EspressoBin board, with spidev. Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
5a866ec001
commit
dd7aa8d4b5
|
@ -213,7 +213,7 @@ static void a3700_spi_mode_set(struct a3700_spi *a3700_spi,
|
|||
}
|
||||
|
||||
static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
|
||||
unsigned int speed_hz, u16 mode)
|
||||
unsigned int speed_hz)
|
||||
{
|
||||
u32 val;
|
||||
u32 prescale;
|
||||
|
@ -231,17 +231,6 @@ static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
|
|||
val |= A3700_SPI_CLK_CAPT_EDGE;
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
|
||||
}
|
||||
|
||||
val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
|
||||
val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
|
||||
|
||||
if (mode & SPI_CPOL)
|
||||
val |= A3700_SPI_CLK_POL;
|
||||
|
||||
if (mode & SPI_CPHA)
|
||||
val |= A3700_SPI_CLK_PHA;
|
||||
|
||||
spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
|
||||
}
|
||||
|
||||
static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
|
||||
|
@ -423,7 +412,7 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
|
|||
|
||||
a3700_spi = spi_master_get_devdata(spi->master);
|
||||
|
||||
a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
|
||||
a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
|
||||
|
||||
byte_len = xfer->bits_per_word >> 3;
|
||||
|
||||
|
@ -584,6 +573,8 @@ static int a3700_spi_prepare_message(struct spi_master *master,
|
|||
|
||||
a3700_spi_bytelen_set(a3700_spi, 4);
|
||||
|
||||
a3700_spi_mode_set(a3700_spi, spi->mode);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue