hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

net: bcmgenet: apply MII configuration in bcmgenet_open() 

In case an interface has been brought down before entering S3, and then
brought up out of S3, all the initialization done during
bcmgenet_probe() by bcmgenet_mii_init() calling bcmgenet_mii_config() is
just lost since register contents are restored to their reset values.

Re-apply this configuration anytime we call bcmgenet_open() to make sure
our port multiplexer is properly configured to match the PHY interface.

Since we are now calling bcmgenet_mii_config() everytime bcmgenet_open()
is called, make sure we only print the message during initialization
time not to pollute the console.

Fixes: b6e978e504 ("net: bcmgenet: add suspend/resume callbacks")
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2014-11-10 18:06:21 -08:00 committed by David S. Miller
parent c96e731c93
commit dbd479db79
3 changed files with 9 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
drivers/net/ethernet/broadcom/genet/bcmgenet.c
View File

@ -2140,6 +2140,9 @@ static int bcmgenet_open(struct net_device *dev)
goto err_irq0;
}
/* Re-configure the port multiplexer towards the PHY device */
bcmgenet_mii_config(priv->dev, false);
phy_connect_direct(dev, priv->phydev, bcmgenet_mii_setup,
priv->phy_interface);
@ -2691,7 +2694,7 @@ static int bcmgenet_resume(struct device *d)
phy_init_hw(priv->phydev);
/* Speed settings must be restored */
bcmgenet_mii_config(priv->dev);
bcmgenet_mii_config(priv->dev, false);
/* disable ethernet MAC while updating its registers */
umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, false);

2
drivers/net/ethernet/broadcom/genet/bcmgenet.h
View File

@ -617,7 +617,7 @@ GENET_IO_MACRO(rbuf, GENET_RBUF_OFF);
/* MDIO routines */
int bcmgenet_mii_init(struct net_device *dev);
int bcmgenet_mii_config(struct net_device *dev);
int bcmgenet_mii_config(struct net_device *dev, bool init);
void bcmgenet_mii_exit(struct net_device *dev);
void bcmgenet_mii_reset(struct net_device *dev);
void bcmgenet_mii_setup(struct net_device *dev);

7
drivers/net/ethernet/broadcom/genet/bcmmii.c
View File

@ -211,7 +211,7 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
}
int bcmgenet_mii_config(struct net_device *dev)
int bcmgenet_mii_config(struct net_device *dev, bool init)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
@ -298,7 +298,8 @@ int bcmgenet_mii_config(struct net_device *dev)
return -EINVAL;
}
dev_info(kdev, "configuring instance for %s\n", phy_name);
if (init)
dev_info(kdev, "configuring instance for %s\n", phy_name);
return 0;
}
@ -350,7 +351,7 @@ static int bcmgenet_mii_probe(struct net_device *dev)
* PHY speed which is needed for bcmgenet_mii_config() to configure
* things appropriately.
*/
ret = bcmgenet_mii_config(dev);
ret = bcmgenet_mii_config(dev, true);
if (ret) {
phy_disconnect(priv->phydev);
return ret;