diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3146ed3f6eca..bea81d018312 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,9 +724,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_IRQ_VIC_TIMER
 	select SAMSUNG_IRQ_UART
 	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index e4a04e4e5627..33c78d7af2e1 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -21,6 +21,9 @@
  * OneNAND features.
 */
 
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
@@ -138,3 +141,4 @@ struct pl080s_lli {
 	u32	control1;
 };
 
+#endif /* ASM_PL080_H */
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index c595bb03f417..b6722decff9d 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -11,7 +11,7 @@ if ARCH_EXYNOS4
 
 config CPU_EXYNOS4210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -131,6 +131,14 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -145,6 +153,7 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
@@ -170,19 +179,26 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_FIMC
+	select S5P_SETUP_MIPIPHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -191,6 +207,8 @@ config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
 	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -200,6 +218,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
@@ -215,8 +234,22 @@ config MACH_ORIGEN
 	select CPU_EXYNOS4210
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select EXYNOS4_DEV_PD
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 413c7cc81979..a25c81836759 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -111,6 +111,11 @@ struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -146,6 +151,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
 }
 
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
 static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -186,6 +196,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -503,13 +523,48 @@ static struct clk init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "sata",
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
@@ -629,6 +684,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_aclk_100.clk,
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "SYSMMU_MDMA",
 		.enable		= exynos4_clk_ip_image_ctrl,
@@ -831,6 +892,81 @@ static struct clksrc_sources clkset_mout_mfc = {
 	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
 };
 
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_sclk_dac,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.parent = &clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_sclk_hdmi,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -1157,6 +1293,71 @@ static struct clk_ops exynos4_fout_apll_ops = {
 	.get_rate = exynos4_fout_apll_get_rate,
 };
 
+static u32 vpll_div[][8] = {
+	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
+	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con0, vpll_con1 = 0;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+	vpll_con0 &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
+			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
+			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+			vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+			vpll_con0 |= vpll_div[i][7] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con0, S5P_VPLL_CON0);
+	__raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+	.get_rate = exynos4_vpll_get_rate,
+	.set_rate = exynos4_vpll_set_rate,
+};
+
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1214,6 +1415,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &exynos4_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1241,7 +1443,10 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 }
 
 static struct clk *clks[] __initdata = {
-	/* Nothing here yet */
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
 };
 
 #ifdef CONFIG_PM_SLEEP
@@ -1275,6 +1480,9 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
@@ -1282,5 +1490,7 @@ void __init exynos4_register_clocks(void)
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	register_syscore_ops(&exynos4_clock_syscore_ops);
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 02ec52a99274..2aa3df003683 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -28,6 +28,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
@@ -180,6 +181,7 @@ void __init exynos4_map_io(void)
 	s3c_i2c2_setname("s3c2440-i2c");
 
 	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
 }
 
 void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
index 564bb530f332..9667c61e64fb 100644
--- a/arch/arm/mach-exynos4/dma.c
+++ b/arch/arm/mach-exynos4/dma.c
@@ -21,151 +21,229 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource exynos4_pdma0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA0,
-		.end	= EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM2_RX,
-		[3] = DMACH_PCM2_TX,
-		[4] = DMACH_MSM_REQ0,
-		[5] = DMACH_MSM_REQ2,
-		[6] = DMACH_SPI0_RX,
-		[7] = DMACH_SPI0_TX,
-		[8] = DMACH_SPI2_RX,
-		[9] = DMACH_SPI2_TX,
-		[10] = DMACH_I2S0S_TX,
-		[11] = DMACH_I2S0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S2_RX,
-		[14] = DMACH_I2S2_TX,
-		[15] = DMACH_UART0_RX,
-		[16] = DMACH_UART0_TX,
-		[17] = DMACH_UART2_RX,
-		[18] = DMACH_UART2_TX,
-		[19] = DMACH_UART4_RX,
-		[20] = DMACH_UART4_TX,
-		[21] = DMACH_SLIMBUS0_RX,
-		[22] = DMACH_SLIMBUS0_TX,
-		[23] = DMACH_SLIMBUS2_RX,
-		[24] = DMACH_SLIMBUS2_TX,
-		[25] = DMACH_SLIMBUS4_RX,
-		[26] = DMACH_SLIMBUS4_TX,
-		[27] = DMACH_AC97_MICIN,
-		[28] = DMACH_AC97_PCMIN,
-		[29] = DMACH_AC97_PCMOUT,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device exynos4_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma0_resource),
-	.resource	= exynos4_pdma0_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma0_pdata,
 	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA0,
+		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct resource exynos4_pdma1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA1,
-		.end	= EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma1_peri[25] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM1_RX,
-		[3] = DMACH_PCM1_TX,
-		[4] = DMACH_MSM_REQ1,
-		[5] = DMACH_MSM_REQ3,
-		[6] = DMACH_SPI1_RX,
-		[7] = DMACH_SPI1_TX,
-		[8] = DMACH_I2S0S_TX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S1_RX,
-		[12] = DMACH_I2S1_TX,
-		[13] = DMACH_UART0_RX,
-		[14] = DMACH_UART0_TX,
-		[15] = DMACH_UART1_RX,
-		[16] = DMACH_UART1_TX,
-		[17] = DMACH_UART3_RX,
-		[18] = DMACH_UART3_TX,
-		[19] = DMACH_SLIMBUS1_RX,
-		[20] = DMACH_SLIMBUS1_TX,
-		[21] = DMACH_SLIMBUS3_RX,
-		[22] = DMACH_SLIMBUS3_TX,
-		[23] = DMACH_SLIMBUS5_RX,
-		[24] = DMACH_SLIMBUS5_TX,
-		[25] = DMACH_SLIMBUS0AUX_RX,
-		[26] = DMACH_SLIMBUS0AUX_TX,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device exynos4_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma1_resource),
-	.resource	= exynos4_pdma1_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma1_pdata,
 	},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
-	&exynos4_device_pdma0,
-	&exynos4_device_pdma1,
+	.res = {
+		.start = EXYNOS4_PA_PDMA1,
+		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init exynos4_dma_init(void)
 {
-	platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
+	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h
index 81209eb1409b..201842a3769e 100644
--- a/arch/arm/mach-exynos4/include/mach/dma.h
+++ b/arch/arm/mach-exynos4/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
new file mode 100644
index 000000000000..9dbe3179ad59
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(8)
+
+#endif
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8f3757..62093b9339db 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -93,7 +93,11 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_MIXER		IRQ_SPI(91)
+#define IRQ_HDMI		IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
 #define IRQ_MFC			IRQ_SPI(94)
+#define IRQ_SDO			IRQ_SPI(95)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
 #define IRQ_I2S0		IRQ_SPI(97)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 7073ac730855..1bea7d139bb0 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -113,6 +113,12 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_VP			0x12C00000
+#define EXYNOS4_PA_MIXER		0x12C10000
+#define EXYNOS4_PA_SDO			0x12C20000
+#define EXYNOS4_PA_HDMI			0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
+
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
@@ -162,6 +168,12 @@
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 
+#define S5P_PA_SDO			EXYNOS4_PA_SDO
+#define S5P_PA_VP			EXYNOS4_PA_VP
+#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
+#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
+
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
 /* UART */
diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h
index 1df3b81f96e8..9d8da51e35ca 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos4/include/mach/pm-core.h
@@ -14,6 +14,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
 #include <mach/regs-pmu.h>
 
 static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@ static inline void s3c_pm_restored_gpios(void)
 	/* nothing here yet */
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
+
+#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h
index a952904b010e..632dd5630138 100644
--- a/arch/arm/mach-exynos4/include/mach/pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/pmu.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PMU_H
 #define __ASM_ARCH_PMU_H __FILE__
 
+#define PMU_TABLE_END	NULL
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,6 +22,11 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
+struct exynos4_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
 
 #endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index cdf9b47c303c..4fff8e938fec 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -25,9 +25,10 @@
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
@@ -35,15 +36,17 @@
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
-#define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE			(1 << 0)
+#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE			(1 << 0)
+
+#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE			(1 << 0)
 
 #define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
 #define S5P_MIPI_DPHY_ENABLE			(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
 #define S5P_MIPI_DPHY_MRESETN			(1 << 2)
 
-#define S5P_PMU_SATA_PHY_CONTROL		S5P_PMUREG(0x0720)
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
 #define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
 #define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
 #define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR		S5P_PMUREG(0x1154)
 #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
 #define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
 #define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
 #define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
 #define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
 #define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR		S5P_PMUREG(0x1174)
 #define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
 #define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
 #define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
 #define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
 #define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
 #define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR			S5P_PMUREG(0x11C4)
 #define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
 #define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
 #define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
 #define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
 #define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR			S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR			S5P_PMUREG(0x11E4)
 #define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
 #define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
 #define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
 #define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
 #define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
 #define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR				S5P_PMUREG(0x1394)
 #define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
 #define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
 #define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
 #define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF			S5P_PMUREG(0x3CA0)
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
@@ -165,4 +161,60 @@
 
 #define S5P_CHECK_SLEEP				0x00000BAD
 
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b799cb..bbd13f454151 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -32,10 +32,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
@@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 1,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1280,
+		.yres		= 800,
+		.refresh	= 60,
+	},
+	.max_bpp	= 24,
+	.default_bpp	= 16,
+	.virtual_x	= 1280,
+	.virtual_y	= 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+	.win[0]		= &nuri_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
 	int gpio = EXYNOS4_GPE1(5);
@@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
 	&emmc_fixed_voltage,
+	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void)
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
+	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 }
 
 MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index ed59f86001ac..18909cf6c07d 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -14,16 +14,31 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
+
 #include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
 
 #include <mach/map.h>
 
@@ -72,19 +87,543 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 	},
 };
 
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+	.constraints	= {
+		.name		= "VDD_ABB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data	= {
+	.constraints	= {
+		.name		= "VDD_ALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
+	.consumer_supplies	= ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+	.constraints	= {
+		.name		= "VDD_RTC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
+	.consumer_supplies	= ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
+	.consumer_supplies	= ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+	.constraints	= {
+		.name		= "VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
+	.consumer_supplies	= ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+	.constraints	= {
+		.name		= "DVDD_SWB_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
+	.consumer_supplies	= ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+	.constraints	= {
+		.name		= "VDD_PLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_3V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
+	.consumer_supplies	= ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+	.constraints	= {
+		.name		= "AVDD18_SWB_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
+	.consumer_supplies	= ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+	.constraints	= {
+		.name		= "VDD_SWB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
+	.consumer_supplies	= ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+	.constraints	= {
+		.name		= "VDD_MIF_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_1.2V",
+		.min_uV		= 950000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
+	.consumer_supplies	= buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+	.constraints	= {
+		.name		= "VDDQ_M1M2_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+	.constraints	= {
+		.name		= "VDD_LCD_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.boot_on	= 1,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
+	.consumer_supplies	= buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+	{ MAX8997_LDO1,		&max8997_ldo1_data },
+	{ MAX8997_LDO2,		&max8997_ldo2_data },
+	{ MAX8997_LDO3,		&max8997_ldo3_data },
+	{ MAX8997_LDO4,		&max8997_ldo4_data },
+	{ MAX8997_LDO6,		&max8997_ldo6_data },
+	{ MAX8997_LDO7,		&max8997_ldo7_data },
+	{ MAX8997_LDO8,		&max8997_ldo8_data },
+	{ MAX8997_LDO9,		&max8997_ldo9_data },
+	{ MAX8997_LDO10,	&max8997_ldo10_data },
+	{ MAX8997_LDO11,	&max8997_ldo11_data },
+	{ MAX8997_LDO14,	&max8997_ldo14_data },
+	{ MAX8997_LDO17,	&max8997_ldo17_data },
+	{ MAX8997_LDO21,	&max8997_ldo21_data },
+	{ MAX8997_BUCK1,	&max8997_buck1_data },
+	{ MAX8997_BUCK2,	&max8997_buck2_data },
+	{ MAX8997_BUCK3,	&max8997_buck3_data },
+	{ MAX8997_BUCK5,	&max8997_buck5_data },
+	{ MAX8997_BUCK7,	&max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+	.regulators	= origen_max8997_regulators,
+
+	.wakeup	= true,
+	.buck1_gpiodvs	= false,
+	.buck2_gpiodvs	= false,
+	.buck5_gpiodvs	= false,
+	.irq_base	= IRQ_GPIO_END + 1,
+
+	.ignore_gpiodvs_side_effect = true,
+	.buck125_default_idx = 0x0,
+
+	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
+	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
+	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
+
+	.buck1_voltage[0]	= 1350000,
+	.buck1_voltage[1]	= 1300000,
+	.buck1_voltage[2]	= 1250000,
+	.buck1_voltage[3]	= 1200000,
+	.buck1_voltage[4]	= 1150000,
+	.buck1_voltage[5]	= 1100000,
+	.buck1_voltage[6]	= 1000000,
+	.buck1_voltage[7]	= 950000,
+
+	.buck2_voltage[0]	= 1100000,
+	.buck2_voltage[1]	= 1100000,
+	.buck2_voltage[2]	= 1100000,
+	.buck2_voltage[3]	= 1100000,
+	.buck2_voltage[4]	= 1000000,
+	.buck2_voltage[5]	= 1000000,
+	.buck2_voltage[6]	= 1000000,
+	.buck2_voltage[7]	= 1000000,
+
+	.buck5_voltage[0]	= 1200000,
+	.buck5_voltage[1]	= 1200000,
+	.buck5_voltage[2]	= 1200000,
+	.buck5_voltage[3]	= 1200000,
+	.buck5_voltage[4]	= 1200000,
+	.buck5_voltage[5]	= 1200000,
+	.buck5_voltage[6]	= 1200000,
+	.buck5_voltage[7]	= 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+		.platform_data	= &origen_max8997_pdata,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+	{
+		.code			= KEY_MENU,
+		.gpio			= EXYNOS4_GPX1(5),
+		.desc			= "gpio-keys: KEY_MENU",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_HOME,
+		.gpio			= EXYNOS4_GPX1(6),
+		.desc			= "gpio-keys: KEY_HOME",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_BACK,
+		.gpio			= EXYNOS4_GPX1(7),
+		.desc			= "gpio-keys: KEY_BACK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_UP,
+		.gpio			= EXYNOS4_GPX2(0),
+		.desc			= "gpio-keys: KEY_UP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_DOWN,
+		.gpio			= EXYNOS4_GPX2(1),
+		.desc			= "gpio-keys: KEY_DOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+	.buttons	= origen_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+	.name		= "gpio-keys",
+	.dev		= {
+		.platform_data	= &origen_gpio_keys_data,
+	},
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	int ret;
+
+	if (power)
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_HIGH, "GPE3_4");
+	else
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+	gpio_free(EXYNOS4_GPE3(4));
+
+	if (ret)
+		pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+	.set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 16,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1024,
+		.yres		= 600,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+	.win[0]		= &origen_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimd0,
+	&s5p_device_hdmi,
+	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mixer,
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_TV],
+	&origen_device_gpiokeys,
+	&origen_lcd_hv070wsa,
 };
 
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+	.no		= EXYNOS4_GPD0(0),
+	.func		= S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+	.pwm_id		= 0,
+	.pwm_period_ns	= 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+	/* Direct HPD to HDMI chip */
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -92,10 +631,42 @@ static void __init origen_map_io(void)
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
+static void __init origen_power_init(void)
+{
+	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_machine_init(void)
 {
+	origen_power_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+	/*
+	 * Since sdhci instance 2 can contain a bootable media,
+	 * sdhci instance 0 is registered after instance 2.
+	 */
 	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+	origen_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
+	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
 MACHINE_START(ORIGEN, "ORIGEN")
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index a16eb569a3e6..35a763e9a659 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -37,6 +37,9 @@
 #include <plat/pd.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -232,17 +235,36 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{I2C_BOARD_INFO("wm8994", 0x1a),},
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c1,
+	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_G3D],
 	&exynos4_device_pd[PD_LCD0],
@@ -258,6 +280,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
+	&s5p_device_hdmi,
+	&s5p_device_mixer,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -294,6 +318,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -301,6 +337,11 @@ static void __init smdkv310_map_io(void)
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
+static void __init smdkv310_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv310_machine_init(void)
 {
 	s3c_i2c1_set_platdata(NULL);
@@ -313,12 +354,19 @@ static void __init smdkv310_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
+	smdkv310_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
@@ -329,6 +377,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d8911004..18cf5c7cf56d 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
 #include <plat/devs.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -110,6 +120,9 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);
 
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
 static struct regulator_init_data lp3974_buck1_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V",
@@ -153,6 +166,8 @@ static struct regulator_init_data lp3974_buck3_data = {
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@ static struct regulator_init_data lp3974_ldo2_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo3_data = {
 	.constraints	= {
 		.name		= "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@ static struct regulator_init_data lp3974_ldo3_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+	.consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
 };
 
 static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@ static struct regulator_init_data lp3974_ldo4_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+	.consumer_supplies = lp3974_ldo4_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo7_data = {
 	.constraints	= {
 		.name		= "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@ static struct regulator_init_data lp3974_ldo7_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
+	.consumer_supplies	= lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@ static struct regulator_init_data lp3974_ldo8_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+	.consumer_supplies = lp3974_ldo8_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+	REGULATOR_SUPPLY("dig_28", "0-001f");
+
 static struct regulator_init_data lp3974_ldo11_data = {
 	.constraints	= {
 		.name		= "CAM_AF_3.3V",
@@ -297,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo11_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+	REGULATOR_SUPPLY("dig_18", "0-001f");
+
 static struct regulator_init_data lp3974_ldo14_data = {
 	.constraints	= {
 		.name		= "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo14_consumer,
 };
 
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
 static struct regulator_init_data lp3974_ldo15_data = {
 	.constraints	= {
 		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
 static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
+	.consumer_supplies	= lp3974_ldo16_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@ static struct max8998_platform_data universal_lp3974_pdata = {
 	.wakeup			= true,
 };
 
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC0,
+	FIXED_REG_ID_HDMI_5V,
+	FIXED_REG_ID_CAM_S_IF,
+	FIXED_REG_ID_CAM_I_CORE,
+	FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "HDMI_5V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+	.supply_name		= "HDMI_EN1",
+	.microvolts		= 5000000,
+	.gpio			= EXYNOS4_GPE0(1),
+	.enable_high		= true,
+	.init_data		= &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= FIXED_REG_ID_HDMI_5V,
+	.dev			= {
+		.platform_data	= &hdmi_fixed_voltage_config,
+	},
+};
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	{
@@ -573,6 +673,11 @@ static void __init universal_touchkey_init(void)
 	gpio_direction_output(gpio, 1);
 }
 
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+	.frequency	= 300 * 1000,
+	.sda_delay	= 200,
+};
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -658,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = {
 
 static struct platform_device mmc0_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 0,
+	.id			= FIXED_REG_ID_MMC0,
 	.dev			= {
 		.platform_data	= &mmc0_fixed_voltage_config,
 	},
@@ -692,18 +797,170 @@ static void __init universal_sdhci_init(void)
 	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
 }
 
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	/* Camera, To be updated */
-};
-
 /* I2C1 */
 static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+	.win[0]		= &universal_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+	REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+	.supply_name	= "CAM_I_CORE_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+	REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+	.supply_name	= "CAM_S_IF_1.8V",
+	.microvolts	= 1800000,
+	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
+	.enable_high	= 1,
+	.init_data	= &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+	return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset	= GPIO_CAM_MEGA_nRST,
+	.reset_polarity	= 0,
+	.set_power	= m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 21600000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= universal_camera_sensors,
+	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name	= "s5p-fimc-md",
+	.id	= -1,
+};
+
+static struct gpio universal_camera_gpios[] = {
+	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(universal_camera_gpios,
+			       ARRAY_SIZE(universal_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+	else
+		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_nRST);
+	gpio_free(GPIO_CAM_8M_ISP_INT);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+		pr_err("Camera port A setup failed\n");
+}
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -712,17 +969,30 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
+	&s5p_device_i2c_hdmiphy,
+	&hdmi_fixed_voltage,
+	&exynos4_device_pd[PD_TV],
+	&s5p_device_hdmi,
+	&s5p_device_sdo,
+	&s5p_device_mixer,
 
 	/* Universal Devices */
 	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&cam_i_core_fixed_reg_dev,
+	&cam_s_if_fixed_reg_dev,
+	&s5p_device_fimc_md,
 };
 
 static void __init universal_map_io(void)
@@ -732,6 +1002,20 @@ static void __init universal_map_io(void)
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+	gpio_direction_input(EXYNOS4_GPX3(7));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init universal_reserve(void)
 {
 	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1024,9 @@ static void __init universal_reserve(void)
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
+	s5p_tv_setup();
 
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
 	universal_tsp_init();
@@ -749,15 +1034,28 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 
 	s3c_i2c5_set_platdata(NULL);
+	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	universal_camera_init();
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 62e4f4363006..509a435afd4b 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -339,6 +339,13 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
+	if (soc_is_exynos4212()) {
+		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+			 S5P_USE_STANDBYWFE_ISP_ARM);
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	/* Save Power control register */
 	asm ("mrc p15, 0, %0, c15, c0, 0"
 	     : "=r" (tmp) : : "cc");
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
index 7ea9eb2a20d2..bba48f5c3e8f 100644
--- a/arch/arm/mach-exynos4/pmu.c
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -16,160 +16,215 @@
 #include <mach/regs-clock.h>
 #include <mach/pmu.h>
 
-static void __iomem *sys_powerdown_reg[] = {
-	S5P_ARM_CORE0_LOWPWR,
-	S5P_DIS_IRQ_CORE0,
-	S5P_DIS_IRQ_CENTRAL0,
-	S5P_ARM_CORE1_LOWPWR,
-	S5P_DIS_IRQ_CORE1,
-	S5P_DIS_IRQ_CENTRAL1,
-	S5P_ARM_COMMON_LOWPWR,
-	S5P_L2_0_LOWPWR,
-	S5P_L2_1_LOWPWR,
-	S5P_CMU_ACLKSTOP_LOWPWR,
-	S5P_CMU_SCLKSTOP_LOWPWR,
-	S5P_CMU_RESET_LOWPWR,
-	S5P_APLL_SYSCLK_LOWPWR,
-	S5P_MPLL_SYSCLK_LOWPWR,
-	S5P_VPLL_SYSCLK_LOWPWR,
-	S5P_EPLL_SYSCLK_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
-	S5P_CMU_RESET_GPSALIVE_LOWPWR,
-	S5P_CMU_CLKSTOP_CAM_LOWPWR,
-	S5P_CMU_CLKSTOP_TV_LOWPWR,
-	S5P_CMU_CLKSTOP_MFC_LOWPWR,
-	S5P_CMU_CLKSTOP_G3D_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
-	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_LOWPWR,
-	S5P_CMU_RESET_CAM_LOWPWR,
-	S5P_CMU_RESET_TV_LOWPWR,
-	S5P_CMU_RESET_MFC_LOWPWR,
-	S5P_CMU_RESET_G3D_LOWPWR,
-	S5P_CMU_RESET_LCD0_LOWPWR,
-	S5P_CMU_RESET_LCD1_LOWPWR,
-	S5P_CMU_RESET_MAUDIO_LOWPWR,
-	S5P_CMU_RESET_GPS_LOWPWR,
-	S5P_TOP_BUS_LOWPWR,
-	S5P_TOP_RETENTION_LOWPWR,
-	S5P_TOP_PWR_LOWPWR,
-	S5P_LOGIC_RESET_LOWPWR,
-	S5P_ONENAND_MEM_LOWPWR,
-	S5P_MODIMIF_MEM_LOWPWR,
-	S5P_G2D_ACP_MEM_LOWPWR,
-	S5P_USBOTG_MEM_LOWPWR,
-	S5P_HSMMC_MEM_LOWPWR,
-	S5P_CSSYS_MEM_LOWPWR,
-	S5P_SECSS_MEM_LOWPWR,
-	S5P_PCIE_MEM_LOWPWR,
-	S5P_SATA_MEM_LOWPWR,
-	S5P_PAD_RETENTION_DRAM_LOWPWR,
-	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
-	S5P_PAD_RETENTION_GPIO_LOWPWR,
-	S5P_PAD_RETENTION_UART_LOWPWR,
-	S5P_PAD_RETENTION_MMCA_LOWPWR,
-	S5P_PAD_RETENTION_MMCB_LOWPWR,
-	S5P_PAD_RETENTION_EBIA_LOWPWR,
-	S5P_PAD_RETENTION_EBIB_LOWPWR,
-	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
-	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
-	S5P_XUSBXTI_LOWPWR,
-	S5P_XXTI_LOWPWR,
-	S5P_EXT_REGULATOR_LOWPWR,
-	S5P_GPIO_MODE_LOWPWR,
-	S5P_GPIO_MODE_MAUDIO_LOWPWR,
-	S5P_CAM_LOWPWR,
-	S5P_TV_LOWPWR,
-	S5P_MFC_LOWPWR,
-	S5P_G3D_LOWPWR,
-	S5P_LCD0_LOWPWR,
-	S5P_LCD1_LOWPWR,
-	S5P_MAUDIO_LOWPWR,
-	S5P_GPS_LOWPWR,
-	S5P_GPS_ALIVE_LOWPWR,
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
-	/* { AFTR, LPA, SLEEP }*/
-	{ 0, 0, 2 },	/* ARM_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
-	{ 0, 0, 2 },	/* ARM_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
-	{ 0, 0, 2 },	/* ARM_COMMON */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
-	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
-	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
-	{ 1, 1, 0 },	/* CMU_RESET */
-	{ 1, 0, 0 },	/* APLL_SYSCLK */
-	{ 1, 0, 0 },	/* MPLL_SYSCLK */
-	{ 1, 0, 0 },	/* VPLL_SYSCLK */
-	{ 1, 1, 0 },	/* EPLL_SYSCLK */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
-	{ 1, 1, 0 },	/* CMU_RESET_CAM */
-	{ 1, 1, 0 },	/* CMU_RESET_TV */
-	{ 1, 1, 0 },	/* CMU_RESET_MFC */
-	{ 1, 1, 0 },	/* CMU_RESET_G3D */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
-	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS */
-	{ 3, 0, 0 },	/* TOP_BUS */
-	{ 1, 0, 1 },	/* TOP_RETENTION */
-	{ 3, 0, 3 },	/* TOP_PWR */
-	{ 1, 1, 0 },	/* LOGIC_RESET */
-	{ 3, 0, 0 },	/* ONENAND_MEM */
-	{ 3, 0, 0 },	/* MODIMIF_MEM */
-	{ 3, 0, 0 },	/* G2D_ACP_MEM */
-	{ 3, 0, 0 },	/* USBOTG_MEM */
-	{ 3, 0, 0 },	/* HSMMC_MEM */
-	{ 3, 0, 0 },	/* CSSYS_MEM */
-	{ 3, 0, 0 },	/* SECSS_MEM */
-	{ 3, 0, 0 },	/* PCIE_MEM */
-	{ 3, 0, 0 },	/* SATA_MEM */
-	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
-	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
-	{ 1, 1, 0 },	/* XUSBXTI */
-	{ 1, 1, 0 },	/* XXTI */
-	{ 1, 1, 0 },	/* EXT_REGULATOR */
-	{ 1, 0, 0 },	/* GPIO_MODE */
-	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
-	{ 7, 0, 0 },	/* CAM */
-	{ 7, 0, 0 },	/* TV */
-	{ 7, 0, 0 },	/* MFC */
-	{ 7, 0, 0 },	/* G3D */
-	{ 7, 0, 0 },	/* LCD0 */
-	{ 7, 0, 0 },	/* LCD1 */
-	{ 7, 7, 0 },	/* MAUDIO */
-	{ 7, 0, 0 },	/* GPS */
-	{ 7, 0, 0 },	/* GPS_ALIVE */
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
-	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+	unsigned int i;
 
-	for (; count > 0; count--)
-		__raw_writel(sys_powerdown_val[count - 1][mode],
-				sys_powerdown_reg[count - 1]);
+	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos4_pmu_config[i].val[mode],
+				exynos4_pmu_config[i].reg);
 }
+
+static int __init exynos4_pmu_init(void)
+{
+	exynos4_pmu_config = exynos4210_pmu_config;
+
+	if (soc_is_exynos4210()) {
+		exynos4_pmu_config = exynos4210_pmu_config;
+		pr_info("EXYNOS4210 PMU Initialize\n");
+	} else if (soc_is_exynos4212()) {
+		exynos4_pmu_config = exynos4212_pmu_config;
+		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else {
+		pr_info("EXYNOS4: PMU not supported\n");
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_pmu_init);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3700cf32af0f..5261a7ed0999 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,7 +6,6 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index b2b2a5bb275e..ae8e482b6427 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <plat/dma.h>
 #include <linux/sysdev.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
@@ -51,6 +50,18 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_has_circular(void)
+{
+	return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
+
+#include <plat/dma.h>
+
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
@@ -163,7 +174,7 @@ struct s3c2410_dma_chan {
 	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
@@ -196,9 +207,4 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index bab139201761..c53ad34c6579 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index d67819dde42a..c410a078622c 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -17,11 +17,11 @@
 
 #include <mach/regs-gpio.h>
 
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
 {
-	struct s3c_gpio_chip *chip;
+	struct samsung_gpio_chip *chip;
 
 	if (pin > S3C_GPIO_END)
 		return NULL;
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 45eea5210c87..2eef7e6f7675 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 5e06c7265835..df6434f326f0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -102,6 +102,7 @@
 #define S3C2443_PCLKCON_UART3		(1<<3)
 #define S3C2443_PCLKCON_IIC		(1<<4)
 #define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
 #define S3C2443_PCLKCON_ADC		(1<<7)
 #define S3C2443_PCLKCON_AC97		(1<<8)
 #define S3C2443_PCLKCON_IIS		(1<<9)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index f1d3bd8f6f17..a99c2f4a523f 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2410_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index c61e3261615d..d2a7d5ef3e67 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -130,11 +130,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 
 static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
 				  struct s3c24xx_dma_map *map,
-				  enum s3c2410_dmasrc dir)
+				  enum dma_data_direction dir)
 {
 	unsigned long chsel;
 
-	if (dir == S3C2410_DMASRC_HW)
+	if (dir == DMA_FROM_DEVICE)
 		chsel = map->channels_rx[0];
 	else
 		chsel = map->channels[0];
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 000000000000..4526f6ba31a8
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+	unsigned long flags;
+	unsigned long slpcon;
+
+	offs *= 2;
+
+	if (pin < S3C2410_GPB(0))
+		return -EINVAL;
+
+	if (pin >= S3C2410_GPF(0) &&
+	    pin <= S3C2410_GPG(16))
+		return -EINVAL;
+
+	if (pin > S3C2410_GPH(16))
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	slpcon = __raw_readl(chip->base + 0x0C);
+
+	slpcon &= ~(3 << offs);
+	slpcon |= state << offs;
+
+	__raw_writel(slpcon, chip->base + 0x0C);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 69b48a7d1dbd..84c7b03e5a30 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -13,7 +13,6 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
-	select S3C_GPIO_PULL_UPDOWN
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
 	help
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81f0ab5..196fb37f4b19 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -38,6 +38,32 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
+static struct clksrc_clk hsspi_eplldiv = {
+	.clk = {
+		.name	= "hsspi-eplldiv",
+		.parent	= &clk_esysclk.clk,
+		.ctrlbit = (1 << 14),
+		.enable = s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+	[0] = &hsspi_eplldiv.clk,
+	[1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+	.clk	= {
+		.name	= "hsspi-if",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = hsspi_sources,
+		.nr_sources = ARRAY_SIZE(hsspi_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
@@ -114,6 +140,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void)
 
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsspi_eplldiv,
+	&hsspi_mux,
 	&hsmmc_div[0],
 	&hsmmc_div[1],
 	&hsmmc_mux[0],
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 494ce913dc95..3156b7a71371 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2416_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
 
 	/* initialize device information early */
 	s3c2416_default_sdhci0();
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index c461fb8e15c0..914e620f1257 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,7 +5,6 @@
 config CPU_S3C2440
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select CPU_S3C244X
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ce99ff72838d..fc84e481efcf 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -68,6 +68,6 @@ void __init s3c2440_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 9ad99f8016a1..48e273ce9f9a 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -180,6 +180,6 @@ void __init s3c2442_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
 }
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index d8eb86823df7..8814031516ce 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,7 +10,6 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
-	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 38058af48972..cd51d04e1de7 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -57,10 +57,6 @@
 
 /* clock selections */
 
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -173,7 +169,7 @@ static struct clksrc_clk clk_arm = {
 
 static struct clksrc_clk clk_hsspi = {
 	.clk	= {
-		.name		= "hsspi",
+		.name		= "hsspi-if",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
 		.enable		= s3c2443_clkcon_enable_s,
@@ -235,48 +231,6 @@ static struct clk clk_hsmmc = {
 	},
 };
 
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
 /* standard clock definitions */
 
 static struct clk init_clocks_off[] = {
@@ -285,11 +239,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
 		.name		= "spi",
 		.devname	= "s3c2410-spi.0",
@@ -312,8 +261,6 @@ static struct clk init_clocks[] = {
 
 static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index e6a28ba52c7d..5df6458ddd42 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f057b6ae4f90..5552e048c2be 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_RTC
 	select S3C64XX_DEV_SPI
 	select S3C24XX_GPIO_EXTRA128
+	select I2C
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034a0c22..902ab9ace93b 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 obj-y				+= cpu.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # Core support for S3C6400 system
 
@@ -55,7 +54,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
 
 # device support
 
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e33579e..872e68361eb4 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -744,7 +744,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 	       apll, mpll, epll);
 
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+		/* Synchronous mode */
+		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	else
+		/* Asynchronous mode */
+		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
 	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfafe4bfc..17d62f4f8204 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	u32 control0, control1;
 
 	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	pr_debug("%s: peripheral %d\n", __func__, peripheral);
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 		break;
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 		break;
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	}
 
 	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
+	writel(0xffffff, S3C64XX_SDMA_SEL);
 
 	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
deleted file mode 100644
index 92b09085caaa..000000000000
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    samsung_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    samsung_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
new file mode 100644
index 000000000000..be9074e17dfd
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 0a5d9268a23e..fe1a98cf0e4c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -58,11 +58,15 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
 #include <plat/dma.h>
@@ -95,7 +99,7 @@ struct s3c2410_dma_chan {
 	unsigned char		 peripheral;
 
 	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 
 
 	dma_addr_t		dev_addr;
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 38659bebe4b1..fcf3dcabb694 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void)
 	__raw_writel(0, S3C64XX_SLPEN);
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* turn on the sleep mode and keep it there, as it seems that during
 	 * suspend the xCON registers get re-set and thus you can end up with
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9f83b8..b91e02093289 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -21,8 +21,11 @@
 #define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
 #define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
 
+#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
 #endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
new file mode 100644
index 000000000000..66668565ee75
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+
+static __devinitdata const struct {
+	u8 id;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+} gf_mods[] = {
+	{ .id = 0x01, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .name = "1253-EV1 Tomatin", },
+	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+					 const struct i2c_device_id *i2c_id)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id)
+			break;
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (!i2c_new_device(i2c->adapter,
+					    &(gf_mods[i].i2c_devs[j])))
+				dev_err(&i2c->dev,
+					"Failed to register dev: %d\n", ret);
+		}
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+			 id, rev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module",
+		.owner = THIS_MODULE,
+	},
+	.probe = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f32ec68002ef..30afaa537fcf 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -47,6 +47,7 @@
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@ static struct platform_device speyside_device = {
 	.id		= -1,
 };
 
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
 	.name		= "speyside-wm8962",
 	.id		= -1,
@@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = {
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -342,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_backlight_device,
 	&speyside_device,
 	&speyside_wm8962_device,
+	&lowland_device,
 	&wallvdd_device,
 };
 
@@ -350,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
 	.irq_base	= 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+	.dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -365,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
 	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -500,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.backup = &banff_backup_pdata,
 
 	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
 		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -557,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
 	REGULATOR_SUPPLY("CPVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -611,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
 	.disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
 	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
 };
 
 static void __init crag6410_map_io(void)
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055e2858b0dd..b375cd5c47cb 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -29,6 +29,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-syscon-power.h>
 #include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -85,6 +86,9 @@ static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
 	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
 	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+	SAVE_ITEM(S3C64XX_SDMA_SEL),
+	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
 };
 
 void s3c_pm_configure_extint(void)
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518dad7f..e361c41314e9 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,24 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
@@ -31,6 +37,7 @@ config S5P64X0_SETUP_I2C1
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -39,6 +46,7 @@ config MACH_SMDK6440
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6440
@@ -46,6 +54,7 @@ config MACH_SMDK6440
 config MACH_SMDK6450
 	bool "SMDK6450"
 	select CPU_S5P6450
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -54,6 +63,7 @@ config MACH_SMDK6450
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf067ed..eb7468012a37 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P64X0 system
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
@@ -28,3 +28,4 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd3092dd2..c54c65d511f0 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -146,7 +146,8 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -499,6 +500,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_low,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6440_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -581,5 +587,7 @@ void __init s5p6440_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16cde109..2d04abfba12e 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -179,7 +179,8 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -553,6 +554,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_audio0,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6450_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -632,5 +638,7 @@ void __init s5p6450_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c00952ea35..617da3b3bfb7 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -38,6 +38,7 @@
 #include <plat/s5p6440.h>
 #include <plat/s5p6450.h>
 #include <plat/adc-core.h>
+#include <plat/fb-core.h>
 
 /* Initial IO mappings */
 
@@ -108,6 +109,7 @@ void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -117,6 +119,7 @@ void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 0e5b3e63e5b3..442dd4ad12da 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -21,115 +21,208 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p64x0_pdma_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PDMA,
-		.end	= S5P64X0_PA_PDMA + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DMA0,
-		.end	= IRQ_DMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_MAX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_MAX,
-		[17] = DMACH_MAX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_MAX,
-		[23] = DMACH_MAX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MAX,
-		[28] = DMACH_MAX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+	.peri = s5p6440_pdma_peri,
+};
+
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_USI_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_USI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_UART4_RX,
-		[9] = DMACH_UART4_TX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_PCM1_TX,
-		[17] = DMACH_PCM1_RX,
-		[18] = DMACH_PCM2_TX,
-		[19] = DMACH_PCM2_RX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_USI_TX,
-		[23] = DMACH_USI_RX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_I2S1_TX,
-		[26] = DMACH_I2S1_RX,
-		[27] = DMACH_I2S2_TX,
-		[28] = DMACH_I2S2_RX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_UART5_RX,
-		[31] = DMACH_UART5_TX,
-	},
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+	.peri = s5p6450_pdma_peri,
 };
 
-static struct platform_device s5p64x0_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
-	.resource	= s5p64x0_pdma_resource,
-	.dev		= {
+struct amba_device s5p64x0_device_pdma = {
+	.dev = {
+		.init_name = "dma-pl330",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.res = {
+		.start = S5P64X0_PA_PDMA,
+		.end = S5P64X0_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_DMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5p64x0_dma_init(void)
@@ -139,7 +232,7 @@ static int __init s5p64x0_dma_init(void)
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
 
-	platform_device_register(&s5p64x0_device_pdma);
+	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb1409b..5a622af461d7 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5837a36ece8d..53982db9d259 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -87,6 +87,10 @@
 
 #define IRQ_I2S0		IRQ_I2SV40
 
+#define IRQ_LCD_FIFO		IRQ_DISPCON0
+#define IRQ_LCD_VSYNC		IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
+
 /* S5P6450 EINT feature will be added */
 
 /*
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 95c91257c7ca..c5ef50c26291 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -47,6 +47,8 @@
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
+#define S5P64X0_PA_FB		0xEE000000
+
 #define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
@@ -64,6 +66,7 @@
 #define S3C_PA_IIC1		S5P6440_PA_IIC1
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
+#define S3C_PA_FB		S5P64X0_PA_FB
 
 #define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
 #define S5P_PA_SROMC		S5P64X0_PA_SROMC
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce254729f3b..88269ec70a38 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,6 +34,10 @@
 #define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
 #define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+
 /* External interrupt control registers for group0 */
 
 #define EINT0CON0_OFFSET		(0x900)
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 340f30f4a3da..b0465d4e84e7 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -92,6 +97,59 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+	.win[0]		= &smdk6440_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6440_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6440_GPN(5), 1);
+		gpio_set_value(S5P6440_GPN(5), 0);
+		gpio_set_value(S5P6440_GPN(5), 1);
+		gpio_free(S5P6440_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+	.set_power	= smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6440_lcd_power_data,
+};
+
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -101,6 +159,8 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6440_device_iis,
+	&s3c_device_fb,
+	&smdk6440_lcd_lte480wv,
 };
 
 static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -147,6 +207,17 @@ static void __init smdk6440_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6440_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -160,6 +231,9 @@ static void __init smdk6440_machine_init(void)
 
 	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 
+	s5p6440_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index ee0da14665b6..2a69caa70afd 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -110,6 +115,59 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
 #endif
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+	.win_mode	= {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+	.win[0]		= &smdk6450_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6450_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6450_GPN(5), 1);
+		gpio_set_value(S5P6450_GPN(5), 0);
+		gpio_set_value(S5P6450_GPN(5), 1);
+		gpio_free(S5P6450_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+	.set_power	= smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6450_lcd_power_data,
+};
+
 static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -119,6 +177,9 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6450_device_iis0,
+	&s3c_device_fb,
+	&smdk6450_lcd_lte480wv,
+
 	/* s5p6450_device_spi0 will be added */
 };
 
@@ -166,6 +227,17 @@ static void __init smdk6450_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6450_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6450_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -179,6 +251,9 @@ static void __init smdk6450_machine_init(void)
 
 	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 
+	s5p6450_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
 }
 
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 000000000000..f346ee4af54d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	if (soc_is_s5p6440()) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (soc_is_s5p6450()) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e8a33c4b054c..e538a4c67e9c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@ if ARCH_S5PC100
 config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb30de5b..8d47709da713 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = {
 	.name		= "otg_phy",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clk_src_mout_href_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_fin_hpll,
@@ -454,14 +459,14 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0fb97c6..065a087f5a8b 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,150 +21,246 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
+#include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pc100_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA0,
-		.end    = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_EXTERNAL,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_HSI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_HSI_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_EXTERNAL,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_HSI_RX,
-		[29] = DMACH_HSI_TX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pc100_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
-	.resource	= s5pc100_pdma0_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma0_pdata,
 	},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA1,
-		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PC100_PA_PDMA0,
+		.end = S5PC100_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device s5pc100_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
-	.resource	= s5pc100_pdma1_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
-	&s5pc100_device_pdma0,
-	&s5pc100_device_pdma1,
+	.res = {
+		.start = S5PC100_PA_PDMA1,
+		.end = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pc100_dma_init(void)
 {
-	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb1409b..201842a3769e 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index aaeb44a73716..f22c683272d3 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,7 +11,7 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
 	help
@@ -93,11 +93,13 @@ config MACH_GONI
 	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
 	select SAMSUNG_DEV_KEYPAD
+	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_FIMC
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f5f8fa89679c..4c5ac7a69e9e 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -174,6 +174,16 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
@@ -203,6 +213,11 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -289,14 +304,14 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -329,6 +344,40 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hdmi",
+		.devname	= "s5pv210-hdmi",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "s5pv210-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "otg",
 		.parent		= &clk_hclk_psys.clk,
@@ -406,6 +455,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "spi",
 		.devname	= "s3c64xx-spi.0",
@@ -594,6 +649,23 @@ static struct clksrc_sources clkset_sclk_mixer = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
 };
 
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clk *clkset_sclk_audio0_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_pcmcdclk0,
@@ -775,14 +847,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
 		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mixer",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &clkset_sclk_mixer,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
 	}, {
 		.clk	= {
 			.name		= "sclk_fimc",
@@ -973,9 +1037,6 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_psys,
 	&clk_vpllsrc,
 	&clk_sclk_vpll,
-	&clk_sclk_dac,
-	&clk_sclk_pixel,
-	&clk_sclk_hdmi,
 	&clk_mout_dmc0,
 	&clk_sclk_dmc0,
 	&clk_sclk_audio0,
@@ -1060,6 +1121,61 @@ static struct clk_ops s5pv210_epll_ops = {
 	.get_rate = s5p_epll_get_rate,
 };
 
+static u32 vpll_div[][5] = {
+	{  54000000, 3, 53, 3, 0 },
+	{ 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con = __raw_readl(S5P_VPLL_CON);
+	vpll_con &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+			vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+			vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+			vpll_con |= vpll_div[i][4] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con, S5P_VPLL_CON);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+	.get_rate = s5pv210_vpll_get_rate,
+	.set_rate = s5pv210_vpll_set_rate,
+};
+
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1108,6 +1224,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &s5pv210_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1153,11 +1270,15 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec78d43..6b8cdccbe931 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -41,6 +41,7 @@
 #include <plat/keypad-core.h>
 #include <plat/sdhci.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 /* Initial IO mappings */
 
@@ -143,6 +144,9 @@ void __init s5pv210_map_io(void)
 
 	/* Use s5pv210-keypad instead of samsung-keypad */
 	samsung_keypad_setname("s5pv210-keypad");
+
+	/* setup TV devices */
+	s5p_hdmi_setname("s5pv210-hdmi");
 }
 
 void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 497d3439a142..86b749c18b77 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,151 +21,240 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pv210_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA0,
-		.end    = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_MAX,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pv210_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
-	.resource	= s5pv210_pdma0_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma0_pdata,
 	},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA1,
-		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PV210_PA_PDMA0,
+		.end = S5PV210_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_PCM2_RX,
-		[31] = DMACH_PCM2_TX,
-	},
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device s5pv210_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
-	.resource	= s5pv210_pdma1_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
-	&s5pv210_device_pdma0,
-	&s5pv210_device_pdma1,
+	.res = {
+		.start = S5PV210_PA_PDMA1,
+		.end = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pv210_dma_init(void)
 {
-	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 81209eb1409b..201842a3769e 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
new file mode 100644
index 000000000000..6afa6242c588
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(3)
+
+#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index b9f9ec33384d..5e0de3a31f3d 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -56,7 +56,7 @@
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
 #define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -86,7 +86,7 @@
 #define IRQ_HDMI		S5P_IRQ_VIC2(12)
 #define IRQ_IIC1		S5P_IRQ_VIC2(13)
 #define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_SDO			S5P_IRQ_VIC2(15)
 #define IRQ_I2S0		S5P_IRQ_VIC2(16)
 #define IRQ_I2S1		S5P_IRQ_VIC2(17)
 #define IRQ_I2S2		S5P_IRQ_VIC2(18)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index aac343c180b2..7ff609f1568b 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,12 @@
 #define S5PV210_PA_FIMC1		0xFB300000
 #define S5PV210_PA_FIMC2		0xFB400000
 
+#define S5PV210_PA_SDO			0xF9000000
+#define S5PV210_PA_VP			0xF9100000
+#define S5PV210_PA_MIXER		0xF9200000
+#define S5PV210_PA_HDMI			0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY		0xFA900000
+
 /* Compatibiltiy Defines */
 
 #define S3C_PA_FB			S5PV210_PA_FB
@@ -110,6 +116,13 @@
 #define S5P_PA_FIMC2			S5PV210_PA_FIMC2
 #define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
 #define S5P_PA_MFC			S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO			S5PV210_PA_SDO
+#define S5P_PA_VP			S5PV210_PA_VP
+#define S5P_PA_MIXER			S5PV210_PA_MIXER
+#define S5P_PA_HDMI			S5PV210_PA_HDMI
+
 #define S5P_PA_ONENAND			S5PC110_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index 3e22109e1b7b..eba8aea63ed8 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 78925c516346..032de66fb8be 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -144,8 +144,9 @@
 
 #define S5P_OTHERS		S5P_CLKREG(0xE000)
 #define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
 #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
 #define S5P_MIPI_DPHY_ENABLE	(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN	(1 << 1)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51a0956..01e4867e25ad 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -272,6 +277,14 @@ static void __init goni_tsp_init(void)
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+static void goni_camera_init(void)
+{
+	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+	/* Set max driver strength on CAM_A_CLKOUT pin. */
+	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -285,6 +298,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = {
 
 static struct regulator_consumer_supply goni_ldo8_consumers[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +489,10 @@ static struct regulator_consumer_supply buck1_consumer =
 static struct regulator_consumer_supply buck2_consumer =
 	REGULATOR_SUPPLY("vddint", NULL);
 
+static struct regulator_consumer_supply buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
 static struct regulator_init_data goni_buck1_data = {
 	.constraints	= {
 		.name		= "VARM_1.2V",
@@ -511,6 +529,8 @@ static struct regulator_init_data goni_buck3_data = {
 			.enabled = 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck3_consumer,
 };
 
 static struct regulator_init_data goni_buck4_data = {
@@ -801,6 +821,39 @@ static void goni_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+	.clk_rate	= 16000000UL,
+	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
+	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+	.platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_ITU_601,
+		.board_info	= &noon010pc30_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 16000000UL,
+	},
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+	.isp_info	= goni_camera_sensors,
+	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name		= "s5p-fimc-md",
+	.id		= -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
@@ -812,10 +865,13 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+	&s5p_device_mixer,
+	&s5p_device_sdo,
 	&s3c_device_i2c0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5p_device_fimc_md,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -884,6 +940,12 @@ static void __init goni_machine_init(void)
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
+	/* FIMC */
+	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	goni_camera_init();
+
 	/* SPI */
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 8c5b3029b39f..d8973ac46bc4 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,6 @@ config PLAT_S3C24XX
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEV_NAND
-	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 0291bd6e236e..e4f46495ed30 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -15,8 +15,6 @@ obj-				:=
 obj-y				+= cpu.o
 obj-y				+= irq.o
 obj-y				+= devs.o
-obj-y				+= gpio.o
-obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 539bd0e3defd..53754bcf15a7 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  *
  * configure the dma source/destination hardware type and address
  *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
+ * source:    DMA_FROM_DEVICE: source is hardware
+ *            DMA_TO_DEVICE: source is memory
  *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		/* source is memory */
 		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
deleted file mode 100644
index 2f3d7c089dfa..000000000000
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
deleted file mode 100644
index 243b6411050d..000000000000
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4)
-		return IRQ_EINT0 + offset;
-	
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-	
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
-	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 24,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPB(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOB",
-			.ngpio			= 16,
-		},
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPC(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOC",
-			.ngpio			= 16,
-		},
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPD(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOD",
-			.ngpio			= 16,
-		},
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPE(0),
-			.label			= "GPIOE",
-			.owner			= THIS_MODULE,
-			.ngpio			= 16,
-		},
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPF(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOF",
-			.ngpio			= 8,
-			.to_irq			= s3c24xx_gpiolib_bankf_toirq,
-		},
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base			= S3C2410_GPG(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOG",
-			.ngpio			= 16,
-			.to_irq			= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C2410_GPHCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPH(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOH",
-			.ngpio			= 11,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPJ(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOJ",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPK(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOK",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPL(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOL",
-			.ngpio			= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPM(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOM",
-			.ngpio			= 2,
-		},
-	},
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s3c24xx_gpios;
-	int gpn;
-
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-
-		s3c_gpiolib_add(chip);
-	}
-
-	return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 59552c0ea5fb..07a4c81587ac 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -205,9 +205,64 @@ static struct clksrc_clk clksrc_clks[] = {
 	},
 };
 
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
 
 static struct clk init_clocks_off[] = {
 	{
+		.name		= "iis",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "hsspi",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -406,6 +461,8 @@ static struct clk *clks[] __initdata = {
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_i2s_eplldiv,
+	&clk_i2s,
 	&clk_usb_bus_host,
 	&clk_epllref,
 	&clk_esysclk,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c954c042..f9241a7a68ca 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -16,9 +16,6 @@ config PLAT_S5P
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_GPIOLIB_4BIT
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
 	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
@@ -76,6 +73,11 @@ config S5P_DEV_FIMD0
 	help
 	  Compile in platform device definitions for FIMD controller 0
 
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
 config S5P_DEV_MFC
 	bool
 	help
@@ -96,6 +98,11 @@ config S5P_DEV_CSIS1
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
 
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
 config S5P_DEV_USB_EHCI
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 4b53e04eeca4..181201974b41 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -31,8 +31,10 @@ obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_FIMC3)	+= dev-fimc3.o
 obj-$(CONFIG_S5P_DEV_FIMD0)	+= dev-fimd0.o
+obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
+obj-$(CONFIG_S5P_DEV_TV)	+= dev-tv.o
 obj-$(CONFIG_S5P_DEV_USB_EHCI)	+= dev-ehci.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/dev-i2c-hdmiphy.c b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
new file mode 100644
index 000000000000..37343f1999f0
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c for hdmiphy device
+ *
+ * Based on plat-samsung/dev-i2c7.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/i2c-hdmiphy.h>
+
+#include <plat/regs-iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+static struct resource s5p_i2c_resource[] = {
+	[0] = {
+		.start = S5P_PA_IIC_HDMIPHY,
+		.end   = S5P_PA_IIC_HDMIPHY + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC_HDMIPHY,
+		.end   = IRQ_IIC_HDMIPHY,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+	.name		  = "s3c2440-hdmiphy-i2c",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p_i2c_resource),
+	.resource	  = s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = S5P_I2C_HDMIPHY_BUS_NUM;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s5p_device_i2c_hdmiphy);
+}
diff --git a/arch/arm/plat-s5p/dev-tv.c b/arch/arm/plat-s5p/dev-tv.c
new file mode 100644
index 000000000000..361a1b63a81b
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-tv.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s5p/dev-tv.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * S5P series device definition for TV device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* HDMI interface */
+static struct resource s5p_hdmi_resources[] = {
+	[0] = {
+		.start	= S5P_PA_HDMI,
+		.end	= S5P_PA_HDMI + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_HDMI,
+		.end	= IRQ_HDMI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_hdmi = {
+	.name		= "s5p-hdmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
+	.resource	= s5p_hdmi_resources,
+};
+EXPORT_SYMBOL(s5p_device_hdmi);
+
+/* SDO interface */
+static struct resource s5p_sdo_resources[] = {
+	[0] = {
+		.start	= S5P_PA_SDO,
+		.end	= S5P_PA_SDO + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SDO,
+		.end	= IRQ_SDO,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_sdo = {
+	.name		= "s5p-sdo",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
+	.resource	= s5p_sdo_resources,
+};
+EXPORT_SYMBOL(s5p_device_sdo);
+
+/* MIXER */
+static struct resource s5p_mixer_resources[] = {
+	[0] = {
+		.start	= S5P_PA_MIXER,
+		.end	= S5P_PA_MIXER + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "mxr"
+	},
+	[1] = {
+		.start	= S5P_PA_VP,
+		.end	= S5P_PA_VP + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "vp"
+	},
+	[2] = {
+		.start	= IRQ_MIXER,
+		.end	= IRQ_MIXER,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "irq"
+	}
+};
+
+static u64 s5p_tv_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mixer = {
+	.name		= "s5p-mixer",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
+	.resource	= s5p_mixer_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &s5p_tv_dmamask,
+	}
+};
+EXPORT_SYMBOL(s5p_device_mixer);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 3e21b9444cc5..002ec9f28f18 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -97,15 +97,24 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 	return (unsigned long)fvco;
 }
 
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
+/* CON0 bit-fields */
 #define PLL46XX_MDIV_MASK	(0x1FF)
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
 #define PLL46XX_MDIV_SHIFT	(16)
 #define PLL46XX_PDIV_SHIFT	(8)
 #define PLL46XX_SDIV_SHIFT	(0)
 
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
 enum pll46xx_type_t {
 	pll_4600,
 	pll_4650,
@@ -148,6 +157,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 #define PLL90XX_PDIV_MASK	(0x3F)
 #define PLL90XX_SDIV_MASK	(0x7)
 #define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
 #define PLL90XX_MDIV_SHIFT	(16)
 #define PLL90XX_PDIV_SHIFT	(8)
 #define PLL90XX_SDIV_SHIFT	(0)
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f88216d23991..a566523d34ec 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -37,7 +37,7 @@ struct s5p_gpioint_bank {
 	int			start;
 	int			nr_groups;
 	int			irq;
-	struct s3c_gpio_chip	**chips;
+	struct samsung_gpio_chip	**chips;
 	void			(*handler)(unsigned int, struct irq_desc *);
 };
 
@@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	for (group = 0; group < bank->nr_groups; group++) {
-		struct s3c_gpio_chip *chip = bank->chips[group];
+		struct samsung_gpio_chip *chip = bank->chips[group];
 		if (!chip)
 			continue;
 
@@ -110,7 +110,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
@@ -131,7 +131,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 		return -EINVAL;
 
 	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
 				      bank->nr_groups, GFP_KERNEL);
 		if (!bank->chips)
 			return -ENOMEM;
@@ -174,7 +174,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 
 int __init s5p_register_gpio_interrupt(int pin)
 {
-	struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
 	int offset, group;
 	int ret;
 
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b8..74714c155e14 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT
 	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
 	  series of processors.
 
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
 config S3C_GPIO_CFG_S3C64XX
 	bool
 	help
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
-	bool
-	select S3C_GPIO_PULL_UPDOWN
-	help
-	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
 config S5P_GPIO_DRVSTR
 	bool
 	help
@@ -300,11 +273,14 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-config S3C_PL330_DMA
+config SAMSUNG_DMADEV
 	bool
-	select PL330
+	select DMADEVICES
+	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+					CPU_S5P6450 || CPU_S5P6440)
+	select ARM_AMBA
 	help
-	  S3C DMA API Driver for PL330 DMAC.
+	  Use DMA device engine for PL330 DMAC.
 
 comment "Power management"
 
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3de756da5eaa..5a5435482595 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,8 +15,6 @@ obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
 obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
@@ -63,9 +61,9 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 # DMA support
 
-obj-$(CONFIG_S3C_DMA)		+= dma.o
+obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
new file mode 100644
index 000000000000..6e3d9abc9e2e
--- /dev/null
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+
+#include <mach/dma.h>
+
+static inline bool pl330_filter(struct dma_chan *chan, void *param)
+{
+	struct dma_pl330_peri *peri = chan->private;
+	return peri->peri_id == (unsigned)param;
+}
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+				struct samsung_dma_info *info)
+{
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	struct dma_slave_config slave_config;
+
+	dma_cap_zero(mask);
+	dma_cap_set(info->cap, mask);
+
+	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+
+	if (info->direction == DMA_FROM_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.src_addr = info->fifo;
+		slave_config.src_addr_width = info->width;
+		slave_config.src_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else if (info->direction == DMA_TO_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.dst_addr = info->fifo;
+		slave_config.dst_addr_width = info->width;
+		slave_config.dst_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	}
+
+	return (unsigned)chan;
+}
+
+static int samsung_dmadev_release(unsigned ch,
+			struct s3c2410_dma_client *client)
+{
+	dma_release_channel((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+			struct samsung_dma_prep_info *info)
+{
+	struct scatterlist sg;
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_async_tx_descriptor *desc;
+
+	switch (info->cap) {
+	case DMA_SLAVE:
+		sg_init_table(&sg, 1);
+		sg_dma_len(&sg) = info->len;
+		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
+			    info->len, offset_in_page(info->buf));
+		sg_dma_address(&sg) = info->buf;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
+		break;
+	case DMA_CYCLIC:
+		desc = chan->device->device_prep_dma_cyclic(chan,
+			info->buf, info->len, info->period, info->direction);
+		break;
+	default:
+		dev_err(&chan->dev->device, "unsupported format\n");
+		return -EFAULT;
+	}
+
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+		return -EFAULT;
+	}
+
+	desc->callback = info->fp;
+	desc->callback_param = info->fp_param;
+
+	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+	dma_async_issue_pending((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+	return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+struct samsung_dma_ops dmadev_ops = {
+	.request	= samsung_dmadev_request,
+	.release	= samsung_dmadev_release,
+	.prepare	= samsung_dmadev_prepare,
+	.trigger	= samsung_dmadev_trigger,
+	.started	= NULL,
+	.flush		= samsung_dmadev_flush,
+	.stop		= samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+	return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
deleted file mode 100644
index 1c0b0401594b..000000000000
--- a/arch/arm/plat-samsung/gpio-config.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg, s3c_gpio_pull_t pull)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		s3c_gpio_setpull(start, pull);
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		ret = s3c_gpio_do_getcfg(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		pup = s3c_gpio_do_getpull(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-			      unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				   unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off * 2;
-	con &= 3;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				      unsigned int off)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	con = __raw_readl(reg);
-	con >>= shift;
-	con &= 0xf;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull,
-			 s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
-				     unsigned int off, s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = drvstr >> shift;
-	drvstr &= 0x3;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp &= ~(0x3 << shift);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif	/* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
deleted file mode 100644
index 7743c4b8b2fb..000000000000
--- a/arch/arm/plat-samsung/gpio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	spin_lock_init(&chip->lock);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct s3c_gpio_chip *s3c_chip = container_of(chip,
-			struct s3c_gpio_chip, chip);
-
-	return s3c_chip->irq_base + offset;
-}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 24ebb1e1de41..ee5014a7cc96 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -62,6 +62,7 @@ extern struct platform_device s3c_device_i2c4;
 extern struct platform_device s3c_device_i2c5;
 extern struct platform_device s3c_device_i2c6;
 extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s5p_device_i2c_hdmiphy;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -142,6 +143,11 @@ extern struct platform_device s5p_device_fimc3;
 extern struct platform_device s5p_device_mfc;
 extern struct platform_device s5p_device_mfc_l;
 extern struct platform_device s5p_device_mfc_r;
+
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_sdo;
+
 extern struct platform_device s5p_device_mipi_csis0;
 extern struct platform_device s5p_device_mipi_csis1;
 
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
new file mode 100644
index 000000000000..4c1a363526cf
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -0,0 +1,63 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+
+struct samsung_dma_prep_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	dma_addr_t buf;
+	unsigned long period;
+	unsigned long len;
+	void (*fp)(void *data);
+	void *fp_param;
+};
+
+struct samsung_dma_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	enum dma_slave_buswidth width;
+	dma_addr_t fifo;
+	struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_ops {
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
+	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
+	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+	int (*trigger)(unsigned ch);
+	int (*started)(unsigned ch);
+	int (*flush)(unsigned ch);
+	int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+	if (samsung_dma_is_dmadev())
+		return samsung_dmadev_get_ops();
+	else
+		return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
similarity index 84%
rename from arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
rename to arch/arm/plat-samsung/include/plat/dma-pl330.h
index 810744213120..2e55e5958674 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -8,11 +8,8 @@
  * (at your option) any later version.
  */
 
-#ifndef	__S3C_DMA_PL330_H_
-#define	__S3C_DMA_PL330_H_
-
-#define S3C2410_DMAF_AUTOSTART		(1 << 0)
-#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
 
 /*
  * PL330 can assign any channel to communicate with
@@ -20,7 +17,7 @@
  * For the sake of consistency across client drivers,
  * We keep the channel names unchanged and only add
  * missing peripherals are added.
- * Order is not important since S3C PL330 API driver
+ * Order is not important since DMA PL330 API driver
  * use these just as IDs.
  */
 enum dma_ch {
@@ -88,11 +85,20 @@ enum dma_ch {
 	DMACH_MAX,
 };
 
-static inline bool s3c_dma_has_circular(void)
+struct s3c2410_dma_client {
+	char	*name;
+};
+
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
-#include <plat/dma.h>
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return true;
+}
 
-#endif	/* __S3C_DMA_PL330_H_ */
+#include <plat/dma-ops.h>
+
+#endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index ab9bce637cbd..1c1ed5481253 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -41,7 +41,7 @@ struct s3c24xx_dma_selection {
 
 	void	(*direction)(struct s3c2410_dma_chan *chan,
 			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
+			     enum dma_data_direction dir);
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 8c273b7a6f56..b9061128abde 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -10,17 +10,14 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/dma-mapping.h>
+
 enum s3c2410_dma_buffresult {
 	S3C2410_RES_OK,
 	S3C2410_RES_ERR,
 	S3C2410_RES_ABORT
 };
 
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
 /* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
@@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
 */
 
 extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum s3c2410_dmasrc source, unsigned long devaddr);
+		enum dma_data_direction source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
@@ -126,3 +123,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
 extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 
+#include <plat/dma-ops.h>
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4d00c7..0fedf47fa502 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,11 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 9a4e53d52967..a181d7ce81cf 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -1,11 +1,11 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Platform - GPIO pin configuration helper definitions
+ * Samsung Platform - GPIO pin configuration helper definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -24,120 +24,30 @@
  * by disabling interrupts.
 */
 
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int config)
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+					 unsigned int off, unsigned int config)
 {
 	return (chip->config->set_config)(chip, off, config);
 }
 
-static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
-					  unsigned int off)
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+					      unsigned int off)
 {
 	return (chip->config->get_config)(chip, off);
 }
 
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
-				      unsigned int off, s3c_gpio_pull_t pull)
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+					  unsigned int off, samsung_gpio_pull_t pull)
 {
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
-static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
-						  unsigned int off)
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+							  unsigned int off)
 {
 	return chip->config->get_pull(chip, off);
 }
 
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
- * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- * @sa s3c_gpio_getcfg_s3c64xx_4bit
- */
-extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-					  unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to s3c_gpio_setcfg_s3c64xx_4bit().
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- */
-extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					     unsigned int off);
-
 /* Pull-{up,down} resistor controls.
  *
  * S3C2410,S3C2440 = Pull-UP,
@@ -147,7 +57,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
  */
 
 /**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -155,11 +65,11 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-up resistor.
  */
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+				    unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
  * @chip: The gpio chip that is being configured
  * @off: The offset for the GPIO being configured
  * @param: pull: The pull mode being requested
@@ -167,11 +77,13 @@ extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-down resistor.
  */
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-				  unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+				      unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -183,45 +95,46 @@ extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
  *	01 = Pull-up resistor connected
  *	10 = Pull-down resistor connected
  */
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-				   unsigned int off, s3c_gpio_pull_t pull);
-
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				       unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					       unsigned int off);
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						       unsigned int off);
 
 /**
- * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1up.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+						    unsigned int off);
 
 /**
- * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1down.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+						      unsigned int off);
 
 /**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -233,19 +146,18 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
  *	10 = Pull-down resistor connected
  *	x1 = No pull up resistor
  */
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				    unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
  * @chip: The gpio chip that the GPIO pin belongs to.
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
 						unsigned int off);
 
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1762dcb4cb9e..d48245bb02b3 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,14 +24,14 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
  * @set_pull: Set the current pull configuraiton for the GPIO
@@ -44,20 +44,20 @@ struct s3c_gpio_chip;
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
  *
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
  * @sa s3c_gpio_getcfg
  * @sa s3c_gpio_setpull
  * @sa s3c_gpio_getpull
  */
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
 	unsigned int	cfg_eint;
 
-	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-				    s3c_gpio_pull_t pull);
+	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+				    samsung_gpio_pull_t pull);
 
-	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
 			       unsigned config);
 };
 
@@ -69,7 +69,7 @@ struct s3c_gpio_cfg {
 #define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
 #define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
 
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
 	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
 
 /**
@@ -128,9 +128,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
-#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
 
 /**
  * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
@@ -143,7 +143,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
 /**
  * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
@@ -151,7 +151,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
  *
  * Read the pull resistor value for the specified pin.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
 /* configure `all` aspects of an gpio */
 
@@ -170,7 +170,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
  * @sa s3c_gpio_cfgpin_range
  */
 extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg, s3c_gpio_pull_t pull);
+				 unsigned int cfg, samsung_gpio_pull_t pull);
 
 static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
 					   unsigned int cfg)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index 8cad4cf19c3c..1fe6917f6a2a 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -25,22 +25,22 @@
  * specific code.
 */
 
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_pm - power management (suspend/resume) information
+ * struct samsung_gpio_pm - power management (suspend/resume) information
  * @save: Routine to save the state of the GPIO block
  * @resume: Routine to resume the GPIO block.
  */
-struct s3c_gpio_pm {
-	void (*save)(struct s3c_gpio_chip *chip);
-	void (*resume)(struct s3c_gpio_chip *chip);
+struct samsung_gpio_pm {
+	void (*save)(struct samsung_gpio_chip *chip);
+	void (*resume)(struct samsung_gpio_chip *chip);
 };
 
-struct s3c_gpio_cfg;
+struct samsung_gpio_cfg;
 
 /**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @group: The group register number for gpio interrupt support.
@@ -60,10 +60,10 @@ struct s3c_gpio_cfg;
  * CPU cores trying to get one lock for different GPIO banks, where each
  * bank of GPIO has its own register space and configuration registers.
  */
-struct s3c_gpio_chip {
+struct samsung_gpio_chip {
 	struct gpio_chip	chip;
-	struct s3c_gpio_cfg	*config;
-	struct s3c_gpio_pm	*pm;
+	struct samsung_gpio_cfg	*config;
+	struct samsung_gpio_pm	*pm;
 	void __iomem		*base;
 	int			irq_base;
 	int			group;
@@ -73,58 +73,11 @@ struct s3c_gpio_chip {
 #endif
 };
 
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
 {
-	return container_of(gpc, struct s3c_gpio_chip, chip);
+	return container_of(gpc, struct samsung_gpio_chip, chip);
 }
 
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-/**
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips);
-extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-
-extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
-extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
-
-
 /**
  * samsung_gpiolib_to_irq - convert gpio pin to irq number
  * @chip: The gpio chip that the pin belongs to.
@@ -136,36 +89,36 @@ extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
 extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
 
 /* exported for core SoC support to change */
-extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
 
 #ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
 {
 	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
 }
 #else
-/* machine specific code should provide s3c_gpiolib_getchip */
+/* machine specific code should provide samsung_gpiolib_getchip */
 
 #include <mach/gpio-track.h>
 
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
 #endif
 
 #ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
 #define __gpio_pm(x) x
 #else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
 #define __gpio_pm(x) NULL
 
 #endif /* CONFIG_PM */
 
 /* locking wrappers to deal with multiple access to the same gpio bank */
-#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
new file mode 100644
index 000000000000..bab139201761
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -0,0 +1,98 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
+*/
+
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
+	s3c_gpio_cfgpin(pin, cfg);
+}
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 56b0059439e1..51d52e767a19 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -60,6 +60,7 @@ extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f6749916d194..dcf68709f9cf 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -165,20 +165,20 @@ extern void s3c_pm_check_store(void);
 extern void s3c_pm_configure_extint(void);
 
 /**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
  *
  * Restore the state of the GPIO pins after sleep, which may involve ensuring
  * that we do not glitch the state of the pins from that the bootloader's
  * resume code has done.
 */
-extern void s3c_pm_restore_gpios(void);
+extern void samsung_pm_restore_gpios(void);
 
 /**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
  *
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
  */
-extern void s3c_pm_save_gpios(void);
+extern void samsung_pm_save_gpios(void);
 
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
deleted file mode 100644
index bf5e2a9d408d..000000000000
--- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __S3C_PL330_PDATA_H
-#define __S3C_PL330_PDATA_H
-
-#include <plat/s3c-dma-pl330.h>
-
-/*
- * Every PL330 DMAC has max 32 peripheral interfaces,
- * of which some may be not be really used in your
- * DMAC's configuration.
- * Populate this array of 32 peri i/fs with relevant
- * channel IDs for used peri i/f and DMACH_MAX for
- * those unused.
- *
- * The platforms just need to provide this info
- * to the S3C DMA API driver for PL330.
- */
-struct s3c_pl330_platdata {
-	enum dma_ch peri[32];
-};
-
-#endif /* __S3C_PL330_PDATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
new file mode 100644
index 000000000000..3bc34f3ce28f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/tv-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *	Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 96528200eb79..4be016eaa6db 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -28,13 +28,13 @@
 #define OFFS_DAT	(0x04)
 #define OFFS_UP		(0x08)
 
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
 }
 
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -60,12 +60,12 @@ static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+	.save	= samsung_gpio_pm_1bit_save,
+	.resume = samsung_gpio_pm_1bit_resume,
 };
 
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
@@ -95,7 +95,7 @@ static inline int is_out(unsigned long con)
 }
 
 /**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
  * @chip: The chip information to resume.
  *
  * Restore one of the GPIO banks that was saved during suspend. This is
@@ -121,7 +121,7 @@ static inline int is_out(unsigned long con)
  * [1] this assumes that writing to a pin DAT whilst in SFN will set the
  *     state for when it is next output.
  */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -187,13 +187,13 @@ static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+	.save	= samsung_gpio_pm_2bit_save,
+	.resume = samsung_gpio_pm_2bit_resume,
 };
 
 #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
@@ -203,7 +203,7 @@ static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
 		chip->pm_save[0] = __raw_readl(chip->base - 4);
 }
 
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
 {
 	u32 old, new, mask;
 	u32 change_mask = 0x0;
@@ -242,14 +242,14 @@ static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
 	return change_mask;
 }
 
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
 {
 	void __iomem *con = chip->base + (index * 4);
 	u32 old_gpcon = __raw_readl(con);
 	u32 gps_gpcon = chip->pm_save[index + 1];
 	u32 gpcon, mask;
 
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
 
 	gpcon = old_gpcon & ~mask;
 	gpcon |= gps_gpcon & mask;
@@ -257,7 +257,7 @@ static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
 	__raw_writel(gpcon, con);
 }
 
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon[2];
@@ -269,10 +269,10 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
 	old_gpcon[0] = 0;
 	old_gpcon[1] = __raw_readl(base + OFFS_CON);
 
-	s3c_gpio_pm_4bit_con(chip, 0);
+	samsung_gpio_pm_4bit_con(chip, 0);
 	if (chip->chip.ngpio > 8) {
 		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
+		samsung_gpio_pm_4bit_con(chip, -1);
 	}
 
 	/* Now change the configurations that require DAT,CON */
@@ -298,19 +298,19 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
 			  old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+	.save	= samsung_gpio_pm_4bit_save,
+	.resume = samsung_gpio_pm_4bit_resume,
 };
 #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
  * @ourchip: The chip for suspend.
  */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->save == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -319,24 +319,24 @@ static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
 }
 
 /**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
  *
  * For all the GPIO banks, save the state of each one ready for going
  * into a suspend mode.
  */
-void s3c_pm_save_gpios(void)
+void samsung_pm_save_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_save_gpio(ourchip);
+		samsung_pm_save_gpio(ourchip);
 
 		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
 			  ourchip->chip.label,
@@ -351,12 +351,12 @@ void s3c_pm_save_gpios(void)
 }
 
 /**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
  * @ourchip: The suspended chip.
  */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->resume == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -364,19 +364,19 @@ static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
 		pm->resume(ourchip);
 }
 
-void s3c_pm_restore_gpios(void)
+void samsung_pm_restore_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_resume_gpio(ourchip);
+		samsung_pm_resume_gpio(ourchip);
 
 		gpio_nr += ourchip->chip.ngpio;
 		gpio_nr += CONFIG_S3C_GPIO_SPACE;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ae6f99834cdd..64ab65f0fdbc 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -268,8 +268,8 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	/* save all necessary core registers not covered by the drivers */
 
-	s3c_pm_save_gpios();
-	s3c_pm_saved_gpios();
+	samsung_pm_save_gpios();
+	samsung_pm_saved_gpios();
 	s3c_pm_save_uarts();
 	s3c_pm_save_core();
 
@@ -306,7 +306,7 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	s3c_pm_restore_core();
 	s3c_pm_restore_uarts();
-	s3c_pm_restore_gpios();
+	samsung_pm_restore_gpios();
 	s3c_pm_restored_gpios();
 
 	s3c_pm_debug_init();
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
new file mode 100644
index 000000000000..582333c70585
--- /dev/null
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung S3C-DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <mach/dma.h>
+
+struct cb_data {
+	void (*fp) (void *);
+	void *fp_param;
+	unsigned ch;
+	struct list_head node;
+};
+
+static LIST_HEAD(dma_list);
+
+static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
+		       int size, enum s3c2410_dma_buffresult res)
+{
+	struct cb_data *data = param;
+
+	data->fp(data->fp_param);
+}
+
+static unsigned s3c_dma_request(enum dma_ch dma_ch,
+				 struct samsung_dma_info *info)
+{
+	struct cb_data *data;
+
+	if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
+		s3c2410_dma_free(dma_ch, info->client);
+		return 0;
+	}
+
+	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
+	data->ch = dma_ch;
+	list_add_tail(&data->node, &dma_list);
+
+	s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
+
+	if (info->cap == DMA_CYCLIC)
+		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
+	s3c2410_dma_config(dma_ch, info->width);
+
+	return (unsigned)dma_ch;
+}
+
+static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
+{
+	struct cb_data *data;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+	list_del(&data->node);
+
+	s3c2410_dma_free(ch, client);
+	kfree(data);
+
+	return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
+{
+	struct cb_data *data;
+	int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+
+	if (!data->fp) {
+		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
+		data->fp = info->fp;
+		data->fp_param = info->fp_param;
+	}
+
+	s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
+
+	return 0;
+}
+
+static inline int s3c_dma_trigger(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
+}
+
+static inline int s3c_dma_started(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
+}
+
+static inline int s3c_dma_flush(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
+}
+
+static inline int s3c_dma_stop(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
+}
+
+static struct samsung_dma_ops s3c_dma_ops = {
+	.request	= s3c_dma_request,
+	.release	= s3c_dma_release,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.started	= s3c_dma_started,
+	.flush		= s3c_dma_flush,
+	.stop		= s3c_dma_stop,
+};
+
+void *s3c_dma_get_ops(void)
+{
+	return &s3c_dma_ops;
+}
+EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
deleted file mode 100644
index f85638c6f5ae..000000000000
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-pl330.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/hardware/pl330.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-/**
- * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
- * @busy_chan: Number of channels currently busy.
- * @peri: List of IDs of peripherals this DMAC can work with.
- * @node: To attach to the global list of DMACs.
- * @pi: PL330 configuration info for the DMAC.
- * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
- * @clk: Pointer of DMAC operation clock.
- */
-struct s3c_pl330_dmac {
-	unsigned		busy_chan;
-	enum dma_ch		*peri;
-	struct list_head	node;
-	struct pl330_info	*pi;
-	struct kmem_cache	*kmcache;
-	struct clk		*clk;
-};
-
-/**
- * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
- * @token: Xfer ID provided by the client.
- * @node: To attach to the list of xfers on a channel.
- * @px: Xfer for PL330 core.
- * @chan: Owner channel of this xfer.
- */
-struct s3c_pl330_xfer {
-	void			*token;
-	struct list_head	node;
-	struct pl330_xfer	px;
-	struct s3c_pl330_chan	*chan;
-};
-
-/**
- * struct s3c_pl330_chan - Logical channel to communicate with
- * 	a Physical peripheral.
- * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
- * 	NULL if the channel is available to be acquired.
- * @id: ID of the peripheral that this channel can communicate with.
- * @options: Options specified by the client.
- * @sdaddr: Address provided via s3c2410_dma_devconfig.
- * @node: To attach to the global list of channels.
- * @lrq: Pointer to the last submitted pl330_req to PL330 core.
- * @xfer_list: To manage list of xfers enqueued.
- * @req: Two requests to communicate with the PL330 engine.
- * @callback_fn: Callback function to the client.
- * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next executed.
- * @dmac: Pointer to the DMAC that manages this channel, NULL if the
- * 	channel is available to be acquired.
- * @client: Client of this channel. NULL if the
- * 	channel is available to be acquired.
- */
-struct s3c_pl330_chan {
-	void				*pl330_chan_id;
-	enum dma_ch			id;
-	unsigned int			options;
-	unsigned long			sdaddr;
-	struct list_head		node;
-	struct pl330_req		*lrq;
-	struct list_head		xfer_list;
-	struct pl330_req		req[2];
-	s3c2410_dma_cbfn_t		callback_fn;
-	struct pl330_reqcfg		rqcfg;
-	struct s3c_pl330_xfer		*xfer_head;
-	struct s3c_pl330_dmac		*dmac;
-	struct s3c2410_dma_client	*client;
-};
-
-/* All DMACs in the platform */
-static LIST_HEAD(dmac_list);
-
-/* All channels to peripherals in the platform */
-static LIST_HEAD(chan_list);
-
-/*
- * Since we add resources(DMACs and Channels) to the global pool,
- * we need to guard access to the resources using a global lock
- */
-static DEFINE_SPINLOCK(res_lock);
-
-/* Returns the channel with ID 'id' in the chan_list */
-static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch;
-
-	list_for_each_entry(ch, &chan_list, node)
-		if (ch->id == id)
-			return ch;
-
-	return NULL;
-}
-
-/* Allocate a new channel with ID 'id' and add to chan_list */
-static void chan_add(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-
-	/* Return if the channel already exists */
-	if (ch)
-		return;
-
-	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
-	/* Return silently to work with other channels */
-	if (!ch)
-		return;
-
-	ch->id = id;
-	ch->dmac = NULL;
-
-	list_add_tail(&ch->node, &chan_list);
-}
-
-/* If the channel is not yet acquired by any client */
-static bool chan_free(struct s3c_pl330_chan *ch)
-{
-	if (!ch)
-		return false;
-
-	/* Channel points to some DMAC only when it's acquired */
-	return ch->dmac ? false : true;
-}
-
-/*
- * Returns 0 is peripheral i/f is invalid or not present on the dmac.
- * Index + 1, otherwise.
- */
-static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
-{
-	enum dma_ch *id = dmac->peri;
-	int i;
-
-	/* Discount invalid markers */
-	if (ch_id == DMACH_MAX)
-		return 0;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch_id)
-			return i + 1;
-
-	return 0;
-}
-
-/* If all channel threads of the DMAC are busy */
-static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
-{
-	struct pl330_info *pi = dmac->pi;
-
-	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
-}
-
-/*
- * Returns the number of free channels that
- * can be handled by this dmac only.
- */
-static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
-{
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	struct s3c_pl330_chan *ch;
-	unsigned found, count = 0;
-	enum dma_ch p;
-	int i;
-
-	for (i = 0; i < PL330_MAX_PERI; i++) {
-		p = id[i];
-		ch = id_to_chan(p);
-
-		if (p == DMACH_MAX || !chan_free(ch))
-			continue;
-
-		found = 0;
-		list_for_each_entry(d, &dmac_list, node) {
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			count++;
-	}
-
-	return count;
-}
-
-/*
- * Measure of suitability of 'dmac' handling 'ch'
- *
- * 0 indicates 'dmac' can not handle 'ch' either
- * because it is not supported by the hardware or
- * because all dmac channels are currently busy.
- *
- * >0 vlaue indicates 'dmac' has the capability.
- * The bigger the value the more suitable the dmac.
- */
-#define MAX_SUIT	UINT_MAX
-#define MIN_SUIT	0
-
-static unsigned suitablility(struct s3c_pl330_dmac *dmac,
-		struct s3c_pl330_chan *ch)
-{
-	struct pl330_info *pi = dmac->pi;
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	unsigned s;
-	int i;
-
-	s = MIN_SUIT;
-	/* If all the DMAC channel threads are busy */
-	if (dmac_busy(dmac))
-		return s;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch->id)
-			break;
-
-	/* If the 'dmac' can't talk to 'ch' */
-	if (i == PL330_MAX_PERI)
-		return s;
-
-	s = MAX_SUIT;
-	list_for_each_entry(d, &dmac_list, node) {
-		/*
-		 * If some other dmac can talk to this
-		 * peri and has some channel free.
-		 */
-		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
-			s = 0;
-			break;
-		}
-	}
-	if (s)
-		return s;
-
-	s = 100;
-
-	/* Good if free chans are more, bad otherwise */
-	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
-
-	return s;
-}
-
-/* More than one DMAC may have capability to transfer data with the
- * peripheral. This function assigns most suitable DMAC to manage the
- * channel and hence communicate with the peripheral.
- */
-static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *d, *dmac = NULL;
-	unsigned sn, sl = MIN_SUIT;
-
-	list_for_each_entry(d, &dmac_list, node) {
-		sn = suitablility(d, ch);
-
-		if (sn == MAX_SUIT)
-			return d;
-
-		if (sn > sl)
-			dmac = d;
-	}
-
-	return dmac;
-}
-
-/* Acquire the channel for peripheral 'id' */
-static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct s3c_pl330_dmac *dmac;
-
-	/* If the channel doesn't exist or is already acquired */
-	if (!ch || !chan_free(ch)) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac = map_chan_to_dmac(ch);
-	/* If couldn't map */
-	if (!dmac) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac->busy_chan++;
-	ch->dmac = dmac;
-
-acq_exit:
-	return ch;
-}
-
-/* Delete xfer from the queue */
-static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
-{
-	struct s3c_pl330_xfer *t;
-	struct s3c_pl330_chan *ch;
-	int found;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Make sure xfer is in the queue */
-	found = 0;
-	list_for_each_entry(t, &ch->xfer_list, node)
-		if (t == xfer) {
-			found = 1;
-			break;
-		}
-
-	if (!found)
-		return;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		t = list_entry(ch->xfer_list.next,
-				struct s3c_pl330_xfer, node);
-	else
-		t = list_entry(xfer->node.next,
-				struct s3c_pl330_xfer, node);
-
-	/* If there was only one node left */
-	if (t == xfer)
-		ch->xfer_head = NULL;
-	else if (ch->xfer_head == xfer)
-		ch->xfer_head = t;
-
-	list_del(&xfer->node);
-}
-
-/* Provides pointer to the next xfer in the queue.
- * If CIRCULAR option is set, the list is left intact,
- * otherwise the xfer is removed from the list.
- * Forced delete 'pluck' can be set to override the CIRCULAR option.
- */
-static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
-		int pluck)
-{
-	struct s3c_pl330_xfer *xfer = ch->xfer_head;
-
-	if (!xfer)
-		return NULL;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		ch->xfer_head = list_entry(ch->xfer_list.next,
-					struct s3c_pl330_xfer, node);
-	else
-		ch->xfer_head = list_entry(xfer->node.next,
-					struct s3c_pl330_xfer, node);
-
-	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		del_from_queue(xfer);
-
-	return xfer;
-}
-
-static inline void add_to_queue(struct s3c_pl330_chan *ch,
-		struct s3c_pl330_xfer *xfer, int front)
-{
-	struct pl330_xfer *xt;
-
-	/* If queue empty */
-	if (ch->xfer_head == NULL)
-		ch->xfer_head = xfer;
-
-	xt = &ch->xfer_head->px;
-	/* If the head already submitted (CIRCULAR head) */
-	if (ch->options & S3C2410_DMAF_CIRCULAR &&
-		(xt == ch->req[0].x || xt == ch->req[1].x))
-		ch->xfer_head = xfer;
-
-	/* If this is a resubmission, it should go at the head */
-	if (front) {
-		ch->xfer_head = xfer;
-		list_add(&xfer->node, &ch->xfer_list);
-	} else {
-		list_add_tail(&xfer->node, &ch->xfer_list);
-	}
-}
-
-static inline void _finish_off(struct s3c_pl330_xfer *xfer,
-		enum s3c2410_dma_buffresult res, int ffree)
-{
-	struct s3c_pl330_chan *ch;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Do callback */
-	if (ch->callback_fn)
-		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
-
-	/* Force Free or if buffer is not needed anymore */
-	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		kmem_cache_free(ch->dmac->kmcache, xfer);
-}
-
-static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
-		struct pl330_req *r)
-{
-	struct s3c_pl330_xfer *xfer;
-	int ret = 0;
-
-	/* If already submitted */
-	if (r->x)
-		return 0;
-
-	xfer = get_from_queue(ch, 0);
-	if (xfer) {
-		r->x = &xfer->px;
-
-		/* Use max bandwidth for M<->M xfers */
-		if (r->rqtype == MEMTOMEM) {
-			struct pl330_info *pi = xfer->chan->dmac->pi;
-			int burst = 1 << ch->rqcfg.brst_size;
-			u32 bytes = r->x->bytes;
-			int bl;
-
-			bl = pi->pcfg.data_bus_width / 8;
-			bl *= pi->pcfg.data_buf_dep;
-			bl /= burst;
-
-			/* src/dst_burst_len can't be more than 16 */
-			if (bl > 16)
-				bl = 16;
-
-			while (bl > 1) {
-				if (!(bytes % (bl * burst)))
-					break;
-				bl--;
-			}
-
-			ch->rqcfg.brst_len = bl;
-		} else {
-			ch->rqcfg.brst_len = 1;
-		}
-
-		ret = pl330_submit_req(ch->pl330_chan_id, r);
-
-		/* If submission was successful */
-		if (!ret) {
-			ch->lrq = r; /* latest submitted req */
-			return 0;
-		}
-
-		r->x = NULL;
-
-		/* If both of the PL330 ping-pong buffers filled */
-		if (ret == -EAGAIN) {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			/* Queue back again */
-			add_to_queue(ch, xfer, 1);
-			ret = 0;
-		} else {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			_finish_off(xfer, S3C2410_RES_ERR, 0);
-		}
-	}
-
-	return ret;
-}
-
-static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
-	struct pl330_req *r, enum pl330_op_err err)
-{
-	unsigned long flags;
-	struct s3c_pl330_xfer *xfer;
-	struct pl330_xfer *xl = r->x;
-	enum s3c2410_dma_buffresult res;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	r->x = NULL;
-
-	s3c_pl330_submit(ch, r);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	/* Map result to S3C DMA API */
-	if (err == PL330_ERR_NONE)
-		res = S3C2410_RES_OK;
-	else if (err == PL330_ERR_ABORT)
-		res = S3C2410_RES_ABORT;
-	else
-		res = S3C2410_RES_ERR;
-
-	/* If last request had some xfer */
-	if (xl) {
-		xfer = container_of(xl, struct s3c_pl330_xfer, px);
-		_finish_off(xfer, res, 0);
-	} else {
-		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
-			__func__, __LINE__);
-	}
-}
-
-static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[0]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[1]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-/* Release an acquired channel */
-static void chan_release(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *dmac;
-
-	if (chan_free(ch))
-		return;
-
-	dmac = ch->dmac;
-	ch->dmac = NULL;
-	dmac->busy_chan--;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
-{
-	struct s3c_pl330_xfer *xfer;
-	enum pl330_chan_op pl330op;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int idx, ret;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto ctrl_exit;
-	}
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		/* Make sure both reqs are enqueued */
-		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-		s3c_pl330_submit(ch, &ch->req[idx]);
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-		pl330op = PL330_OP_START;
-		break;
-
-	case S3C2410_DMAOP_STOP:
-		pl330op = PL330_OP_ABORT;
-		break;
-
-	case S3C2410_DMAOP_FLUSH:
-		pl330op = PL330_OP_FLUSH;
-		break;
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_TIMEOUT:
-	case S3C2410_DMAOP_STARTED:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-
-	default:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return -EINVAL;
-	}
-
-	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
-
-	if (pl330op == PL330_OP_START) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return ret;
-	}
-
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	/* Abort the current xfer */
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		/* Drop xfer during FLUSH */
-		if (pl330op == PL330_OP_FLUSH)
-			del_from_queue(xfer);
-
-		ch->req[idx].x = NULL;
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT,
-				pl330op == PL330_OP_FLUSH ? 1 : 0);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Flush the whole queue */
-	if (pl330op == PL330_OP_FLUSH) {
-
-		if (ch->req[1 - idx].x) {
-			xfer = container_of(ch->req[1 - idx].x,
-					struct s3c_pl330_xfer, px);
-
-			del_from_queue(xfer);
-
-			ch->req[1 - idx].x = NULL;
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-		}
-
-		/* Finish off the remaining in the queue */
-		xfer = ch->xfer_head;
-		while (xfer) {
-
-			del_from_queue(xfer);
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-
-			xfer = ch->xfer_head;
-		}
-	}
-
-ctrl_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-int s3c2410_dma_enqueue(enum dma_ch id, void *token,
-			dma_addr_t addr, int size)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int idx, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	/* Error if invalid or free channel */
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	/* Error if size is unaligned */
-	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
-	if (!xfer) {
-		ret = -ENOMEM;
-		goto enq_exit;
-	}
-
-	xfer->token = token;
-	xfer->chan = ch;
-	xfer->px.bytes = size;
-	xfer->px.next = NULL; /* Single request */
-
-	/* For S3C DMA API, direction is always fixed for all xfers */
-	if (ch->req[0].rqtype == MEMTODEV) {
-		xfer->px.src_addr = addr;
-		xfer->px.dst_addr = ch->sdaddr;
-	} else {
-		xfer->px.src_addr = ch->sdaddr;
-		xfer->px.dst_addr = addr;
-	}
-
-	add_to_queue(ch, xfer, 0);
-
-	/* Try submitting on either request */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (!ch->req[idx].x)
-		s3c_pl330_submit(ch, &ch->req[idx]);
-	else
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	if (ch->options & S3C2410_DMAF_AUTOSTART)
-		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
-
-	return 0;
-
-enq_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-int s3c2410_dma_request(enum dma_ch id,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c_pl330_dmac *dmac;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = chan_acquire(id);
-	if (!ch) {
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	dmac = ch->dmac;
-
-	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
-	if (!ch->pl330_chan_id) {
-		chan_release(ch);
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	ch->client = client;
-	ch->options = 0; /* Clear any option */
-	ch->callback_fn = NULL; /* Clear any callback */
-	ch->lrq = NULL;
-
-	ch->rqcfg.brst_size = 2; /* Default word size */
-	ch->rqcfg.swap = SWAP_NO;
-	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.privileged = 0;
-	ch->rqcfg.insnaccess = 0;
-
-	/* Set invalid direction */
-	ch->req[0].rqtype = DEVTODEV;
-	ch->req[1].rqtype = ch->req[0].rqtype;
-
-	ch->req[0].cfg = &ch->rqcfg;
-	ch->req[1].cfg = ch->req[0].cfg;
-
-	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
-	ch->req[1].peri = ch->req[0].peri;
-
-	ch->req[0].token = &ch->req[0];
-	ch->req[0].xfer_cb = s3c_pl330_rq0;
-	ch->req[1].token = &ch->req[1];
-	ch->req[1].xfer_cb = s3c_pl330_rq1;
-
-	ch->req[0].x = NULL;
-	ch->req[1].x = NULL;
-
-	/* Reset xfer list */
-	INIT_LIST_HEAD(&ch->xfer_list);
-	ch->xfer_head = NULL;
-
-req_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int ret = 0;
-	unsigned idx;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		goto free_exit;
-
-	/* Refuse if someone else wanted to free the channel */
-	if (ch->client != client) {
-		ret = -EBUSY;
-		goto free_exit;
-	}
-
-	/* Stop any active xfer, Flushe the queue and do callbacks */
-	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
-
-	/* Abort the submitted requests */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	if (ch->req[1 - idx].x) {
-		xfer = container_of(ch->req[1 - idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[1 - idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Pluck and Abort the queued requests in order */
-	do {
-		xfer = get_from_queue(ch, 1);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	} while (xfer);
-
-	ch->client = NULL;
-
-	pl330_release_channel(ch->pl330_chan_id);
-
-	ch->pl330_chan_id = NULL;
-
-	chan_release(ch);
-
-free_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-int s3c2410_dma_config(enum dma_ch id, int xferunit)
-{
-	struct s3c_pl330_chan *ch;
-	struct pl330_info *pi;
-	unsigned long flags;
-	int i, dbwidth, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	pi = ch->dmac->pi;
-	dbwidth = pi->pcfg.data_bus_width / 8;
-
-	/* Max size of xfer can be pcfg.data_bus_width */
-	if (xferunit > dbwidth) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	i = 0;
-	while (xferunit != (1 << i))
-		i++;
-
-	/* If valid value */
-	if (xferunit == (1 << i))
-		ch->rqcfg.brst_size = i;
-	else
-		ret = -EINVAL;
-
-cfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-/* Options that are supported by this driver */
-#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
-
-int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
-		ret = -EINVAL;
-	else
-		ch->options = options;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		ret = -EINVAL;
-	else
-		ch->callback_fn = rtn;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
-			  unsigned long address)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	switch (source) {
-	case S3C2410_DMASRC_HW: /* P->M */
-		ch->req[0].rqtype = DEVTOMEM;
-		ch->req[1].rqtype = DEVTOMEM;
-		ch->rqcfg.src_inc = 0;
-		ch->rqcfg.dst_inc = 1;
-		break;
-	case S3C2410_DMASRC_MEM: /* M->P */
-		ch->req[0].rqtype = MEMTODEV;
-		ch->req[1].rqtype = MEMTODEV;
-		ch->rqcfg.src_inc = 1;
-		ch->rqcfg.dst_inc = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	ch->sdaddr = address;
-
-devcfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct pl330_chanstatus status;
-	int ret;
-
-	if (!ch || chan_free(ch))
-		return -EINVAL;
-
-	ret = pl330_chan_status(ch->pl330_chan_id, &status);
-	if (ret < 0)
-		return ret;
-
-	*src = status.src_addr;
-	*dst = status.dst_addr;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-static irqreturn_t pl330_irq_handler(int irq, void *data)
-{
-	if (pl330_update(data))
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
-}
-
-static int pl330_probe(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *s3c_pl330_dmac;
-	struct s3c_pl330_platdata *pl330pd;
-	struct pl330_info *pl330_info;
-	struct resource *res;
-	int i, ret, irq;
-
-	pl330pd = pdev->dev.platform_data;
-
-	/* Can't do without the list of _32_ peripherals */
-	if (!pl330pd || !pl330pd->peri) {
-		dev_err(&pdev->dev, "platform data missing!\n");
-		return -ENODEV;
-	}
-
-	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
-	if (!pl330_info)
-		return -ENOMEM;
-
-	pl330_info->pl330_data = NULL;
-	pl330_info->dev = &pdev->dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto probe_err1;
-	}
-
-	request_mem_region(res->start, resource_size(res), pdev->name);
-
-	pl330_info->base = ioremap(res->start, resource_size(res));
-	if (!pl330_info->base) {
-		ret = -ENXIO;
-		goto probe_err2;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto probe_err3;
-	}
-
-	ret = request_irq(irq, pl330_irq_handler, 0,
-			dev_name(&pdev->dev), pl330_info);
-	if (ret)
-		goto probe_err4;
-
-	/* Allocate a new DMAC */
-	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
-	if (!s3c_pl330_dmac) {
-		ret = -ENOMEM;
-		goto probe_err5;
-	}
-
-	/* Get operation clock and enable it */
-	s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
-	if (IS_ERR(s3c_pl330_dmac->clk)) {
-		dev_err(&pdev->dev, "Cannot get operation clock.\n");
-		ret = -EINVAL;
-		goto probe_err6;
-	}
-	clk_enable(s3c_pl330_dmac->clk);
-
-	ret = pl330_add(pl330_info);
-	if (ret)
-		goto probe_err7;
-
-	/* Hook the info */
-	s3c_pl330_dmac->pi = pl330_info;
-
-	/* No busy channels */
-	s3c_pl330_dmac->busy_chan = 0;
-
-	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
-				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
-
-	if (!s3c_pl330_dmac->kmcache) {
-		ret = -ENOMEM;
-		goto probe_err8;
-	}
-
-	/* Get the list of peripherals */
-	s3c_pl330_dmac->peri = pl330pd->peri;
-
-	/* Attach to the list of DMACs */
-	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
-
-	/* Create a channel for each peripheral in the DMAC
-	 * that is, if it doesn't already exist
-	 */
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
-			chan_add(s3c_pl330_dmac->peri[i]);
-
-	printk(KERN_INFO
-		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
-	printk(KERN_INFO
-		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
-		pl330_info->pcfg.data_buf_dep,
-		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
-		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
-
-	return 0;
-
-probe_err8:
-	pl330_del(pl330_info);
-probe_err7:
-	clk_disable(s3c_pl330_dmac->clk);
-	clk_put(s3c_pl330_dmac->clk);
-probe_err6:
-	kfree(s3c_pl330_dmac);
-probe_err5:
-	free_irq(irq, pl330_info);
-probe_err4:
-probe_err3:
-	iounmap(pl330_info->base);
-probe_err2:
-	release_mem_region(res->start, resource_size(res));
-probe_err1:
-	kfree(pl330_info);
-
-	return ret;
-}
-
-static int pl330_remove(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *dmac, *d;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int del, found;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	found = 0;
-	list_for_each_entry(d, &dmac_list, node)
-		if (d->pi->dev == &pdev->dev) {
-			found = 1;
-			break;
-		}
-
-	if (!found) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-	}
-
-	dmac = d;
-
-	/* Remove all Channels that are managed only by this DMAC */
-	list_for_each_entry(ch, &chan_list, node) {
-
-		/* Only channels that are handled by this DMAC */
-		if (iface_of_dmac(dmac, ch->id))
-			del = 1;
-		else
-			continue;
-
-		/* Don't remove if some other DMAC has it too */
-		list_for_each_entry(d, &dmac_list, node)
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				del = 0;
-				break;
-			}
-
-		if (del) {
-			spin_unlock_irqrestore(&res_lock, flags);
-			s3c2410_dma_free(ch->id, ch->client);
-			spin_lock_irqsave(&res_lock, flags);
-			list_del(&ch->node);
-			kfree(ch);
-		}
-	}
-
-	/* Disable operation clock */
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-
-	/* Remove the DMAC */
-	list_del(&dmac->node);
-	kfree(dmac);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-
-static struct platform_driver pl330_driver = {
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c-pl330",
-	},
-	.probe		= pl330_probe,
-	.remove		= pl330_remove,
-};
-
-static int __init pl330_init(void)
-{
-	return platform_driver_register(&pl330_driver);
-}
-module_init(pl330_init);
-
-static void __exit pl330_exit(void)
-{
-	platform_driver_unregister(&pl330_driver);
-	return;
-}
-module_exit(pl330_exit);
-
-MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
-MODULE_LICENSE("GPL");
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 2e3b3d38c465..ab8f469f5cf8 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -193,7 +193,8 @@ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
 config PL330_DMA
 	tristate "DMA API Driver for PL330"
 	select DMA_ENGINE
-	depends on PL330
+	depends on ARM_AMBA
+	select PL330
 	help
 	  Select if your platform has one or more PL330 DMACs.
 	  You need to provide platform specific settings via
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index be21e3f138a8..cd8df7f5b5c8 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -66,32 +66,29 @@
  *    after the final transfer signalled by LBREQ or LSREQ.  The DMAC
  *    will then move to the next LLI entry.
  *
- * Only the former works sanely with scatter lists, so we only implement
- * the DMAC flow control method.  However, peripherals which use the LBREQ
- * and LSREQ signals (eg, MMCI) are unable to use this mode, which through
- * these hardware restrictions prevents them from using scatter DMA.
- *
  * Global TODO:
  * - Break out common code from arch/arm/mach-s3c64xx and share
  */
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/dmaengine.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl08x.h>
 #include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
-
+#include <linux/slab.h>
 #include <asm/hardware/pl080.h>
 
 #define DRIVER_NAME	"pl08xdmac"
 
+static struct amba_driver pl08x_amba_driver;
+
 /**
  * struct vendor_data - vendor-specific config parameters for PL08x derivatives
  * @channels: the number of channels available in this variant
@@ -126,7 +123,8 @@ struct pl08x_lli {
  * @phy_chans: array of data for the physical channels
  * @pool: a pool for the LLI descriptors
  * @pool_ctr: counter of LLIs in the pool
- * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
+ * fetches
  * @mem_buses: set to indicate memory transfers on AHB2.
  * @lock: a spinlock for this struct
  */
@@ -149,14 +147,6 @@ struct pl08x_driver_data {
  * PL08X specific defines
  */
 
-/*
- * Memory boundaries: the manual for PL08x says that the controller
- * cannot read past a 1KiB boundary, so these defines are used to
- * create transfer LLIs that do not cross such boundaries.
- */
-#define PL08X_BOUNDARY_SHIFT		(10)	/* 1KB 0x400 */
-#define PL08X_BOUNDARY_SIZE		(1 << PL08X_BOUNDARY_SHIFT)
-
 /* Size (bytes) of each LLI buffer allocated for one transfer */
 # define PL08X_LLI_TSFR_SIZE	0x2000
 
@@ -272,7 +262,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
 	writel(val, ch->base + PL080_CH_CONFIG);
 }
 
-
 /*
  * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
  * clears any pending interrupt status.  This should not be used for
@@ -407,6 +396,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
 		return NULL;
 	}
 
+	pm_runtime_get_sync(&pl08x->adev->dev);
 	return ch;
 }
 
@@ -420,6 +410,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
 	/* Stop the channel and clear its interrupts */
 	pl08x_terminate_phy_chan(pl08x, ch);
 
+	pm_runtime_put(&pl08x->adev->dev);
+
 	/* Mark it as free */
 	ch->serving = NULL;
 	spin_unlock_irqrestore(&ch->lock, flags);
@@ -499,36 +491,30 @@ struct pl08x_lli_build_data {
 };
 
 /*
- * Autoselect a master bus to use for the transfer this prefers the
- * destination bus if both available if fixed address on one bus the
- * other will be chosen
+ * Autoselect a master bus to use for the transfer. Slave will be the chosen as
+ * victim in case src & dest are not similarly aligned. i.e. If after aligning
+ * masters address with width requirements of transfer (by sending few byte by
+ * byte data), slave is still not aligned, then its width will be reduced to
+ * BYTE.
+ * - prefers the destination bus if both available
+ * - prefers bus with fixed address (i.e. peripheral)
  */
 static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
 	struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
 {
 	if (!(cctl & PL080_CONTROL_DST_INCR)) {
-		*mbus = &bd->srcbus;
-		*sbus = &bd->dstbus;
-	} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
 		*mbus = &bd->dstbus;
 		*sbus = &bd->srcbus;
+	} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+		*mbus = &bd->srcbus;
+		*sbus = &bd->dstbus;
 	} else {
-		if (bd->dstbus.buswidth == 4) {
+		if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
 			*mbus = &bd->dstbus;
 			*sbus = &bd->srcbus;
-		} else if (bd->srcbus.buswidth == 4) {
-			*mbus = &bd->srcbus;
-			*sbus = &bd->dstbus;
-		} else if (bd->dstbus.buswidth == 2) {
-			*mbus = &bd->dstbus;
-			*sbus = &bd->srcbus;
-		} else if (bd->srcbus.buswidth == 2) {
-			*mbus = &bd->srcbus;
-			*sbus = &bd->dstbus;
 		} else {
-			/* bd->srcbus.buswidth == 1 */
-			*mbus = &bd->dstbus;
-			*sbus = &bd->srcbus;
+			*mbus = &bd->srcbus;
+			*sbus = &bd->dstbus;
 		}
 	}
 }
@@ -547,7 +533,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
 	llis_va[num_llis].cctl = cctl;
 	llis_va[num_llis].src = bd->srcbus.addr;
 	llis_va[num_llis].dst = bd->dstbus.addr;
-	llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+	llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
+		sizeof(struct pl08x_lli);
 	llis_va[num_llis].lli |= bd->lli_bus;
 
 	if (cctl & PL080_CONTROL_SRC_INCR)
@@ -560,16 +547,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
 	bd->remainder -= len;
 }
 
-/*
- * Return number of bytes to fill to boundary, or len.
- * This calculation works for any value of addr.
- */
-static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
+static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
+		u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
 {
-	size_t boundary_len = PL08X_BOUNDARY_SIZE -
-			(addr & (PL08X_BOUNDARY_SIZE - 1));
-
-	return min(boundary_len, len);
+	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+	pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+	(*total_bytes) += len;
 }
 
 /*
@@ -583,13 +566,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	struct pl08x_bus_data *mbus, *sbus;
 	struct pl08x_lli_build_data bd;
 	int num_llis = 0;
-	u32 cctl;
-	size_t max_bytes_per_lli;
-	size_t total_bytes = 0;
+	u32 cctl, early_bytes = 0;
+	size_t max_bytes_per_lli, total_bytes = 0;
 	struct pl08x_lli *llis_va;
 
-	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
-				      &txd->llis_bus);
+	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
 	if (!txd->llis_va) {
 		dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
 		return 0;
@@ -619,55 +600,85 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	bd.srcbus.buswidth = bd.srcbus.maxwidth;
 	bd.dstbus.buswidth = bd.dstbus.maxwidth;
 
-	/*
-	 * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
-	 */
-	max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
-		PL080_CONTROL_TRANSFER_SIZE_MASK;
-
 	/* We need to count this down to zero */
 	bd.remainder = txd->len;
 
-	/*
-	 * Choose bus to align to
-	 * - prefers destination bus if both available
-	 * - if fixed address on one bus chooses other
-	 */
 	pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
-	dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
+	dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
 		 bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
 		 bd.srcbus.buswidth,
 		 bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
 		 bd.dstbus.buswidth,
-		 bd.remainder, max_bytes_per_lli);
+		 bd.remainder);
 	dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
 		 mbus == &bd.srcbus ? "src" : "dst",
 		 sbus == &bd.srcbus ? "src" : "dst");
 
-	if (txd->len < mbus->buswidth) {
-		/* Less than a bus width available - send as single bytes */
-		while (bd.remainder) {
-			dev_vdbg(&pl08x->adev->dev,
-				 "%s single byte LLIs for a transfer of "
-				 "less than a bus width (remain 0x%08x)\n",
-				 __func__, bd.remainder);
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
-		}
-	} else {
-		/* Make one byte LLIs until master bus is aligned */
-		while ((mbus->addr) % (mbus->buswidth)) {
-			dev_vdbg(&pl08x->adev->dev,
-				"%s adjustment lli for less than bus width "
-				 "(remain 0x%08x)\n",
-				 __func__, bd.remainder);
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
+	/*
+	 * Zero length is only allowed if all these requirements are met:
+	 * - flow controller is peripheral.
+	 * - src.addr is aligned to src.width
+	 * - dst.addr is aligned to dst.width
+	 *
+	 * sg_len == 1 should be true, as there can be two cases here:
+	 * - Memory addresses are contiguous and are not scattered. Here, Only
+	 * one sg will be passed by user driver, with memory address and zero
+	 * length. We pass this to controller and after the transfer it will
+	 * receive the last burst request from peripheral and so transfer
+	 * finishes.
+	 *
+	 * - Memory addresses are scattered and are not contiguous. Here,
+	 * Obviously as DMA controller doesn't know when a lli's transfer gets
+	 * over, it can't load next lli. So in this case, there has to be an
+	 * assumption that only one lli is supported. Thus, we can't have
+	 * scattered addresses.
+	 */
+	if (!bd.remainder) {
+		u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+			PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
+					(fc <= PL080_FLOW_SRC2DST_SRC))) {
+			dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
+				__func__);
+			return 0;
 		}
 
+		if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
+				(bd.srcbus.addr % bd.srcbus.buswidth)) {
+			dev_err(&pl08x->adev->dev,
+				"%s src & dst address must be aligned to src"
+				" & dst width if peripheral is flow controller",
+				__func__);
+			return 0;
+		}
+
+		cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+				bd.dstbus.buswidth, 0);
+		pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+	}
+
+	/*
+	 * Send byte by byte for following cases
+	 * - Less than a bus width available
+	 * - until master bus is aligned
+	 */
+	if (bd.remainder < mbus->buswidth)
+		early_bytes = bd.remainder;
+	else if ((mbus->addr) % (mbus->buswidth)) {
+		early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth);
+		if ((bd.remainder - early_bytes) < mbus->buswidth)
+			early_bytes = bd.remainder;
+	}
+
+	if (early_bytes) {
+		dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs "
+				"(remain 0x%08x)\n", __func__, bd.remainder);
+		prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
+				&total_bytes);
+	}
+
+	if (bd.remainder) {
 		/*
 		 * Master now aligned
 		 * - if slave is not then we must set its width down
@@ -680,138 +691,55 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			sbus->buswidth = 1;
 		}
 
+		/* Bytes transferred = tsize * src width, not MIN(buswidths) */
+		max_bytes_per_lli = bd.srcbus.buswidth *
+			PL080_CONTROL_TRANSFER_SIZE_MASK;
+
 		/*
 		 * Make largest possible LLIs until less than one bus
 		 * width left
 		 */
 		while (bd.remainder > (mbus->buswidth - 1)) {
-			size_t lli_len, target_len, tsize, odd_bytes;
+			size_t lli_len, tsize, width;
 
 			/*
 			 * If enough left try to send max possible,
 			 * otherwise try to send the remainder
 			 */
-			target_len = min(bd.remainder, max_bytes_per_lli);
+			lli_len = min(bd.remainder, max_bytes_per_lli);
 
 			/*
-			 * Set bus lengths for incrementing buses to the
-			 * number of bytes which fill to next memory boundary,
-			 * limiting on the target length calculated above.
+			 * Check against maximum bus alignment: Calculate actual
+			 * transfer size in relation to bus width and get a
+			 * maximum remainder of the highest bus width - 1
 			 */
-			if (cctl & PL080_CONTROL_SRC_INCR)
-				bd.srcbus.fill_bytes =
-					pl08x_pre_boundary(bd.srcbus.addr,
-						target_len);
-			else
-				bd.srcbus.fill_bytes = target_len;
+			width = max(mbus->buswidth, sbus->buswidth);
+			lli_len = (lli_len / width) * width;
+			tsize = lli_len / bd.srcbus.buswidth;
 
-			if (cctl & PL080_CONTROL_DST_INCR)
-				bd.dstbus.fill_bytes =
-					pl08x_pre_boundary(bd.dstbus.addr,
-						target_len);
-			else
-				bd.dstbus.fill_bytes = target_len;
+			dev_vdbg(&pl08x->adev->dev,
+				"%s fill lli with single lli chunk of "
+				"size 0x%08zx (remainder 0x%08zx)\n",
+				__func__, lli_len, bd.remainder);
 
-			/* Find the nearest */
-			lli_len	= min(bd.srcbus.fill_bytes,
-				      bd.dstbus.fill_bytes);
-
-			BUG_ON(lli_len > bd.remainder);
-
-			if (lli_len <= 0) {
-				dev_err(&pl08x->adev->dev,
-					"%s lli_len is %zu, <= 0\n",
-						__func__, lli_len);
-				return 0;
-			}
-
-			if (lli_len == target_len) {
-				/*
-				 * Can send what we wanted.
-				 * Maintain alignment
-				 */
-				lli_len	= (lli_len/mbus->buswidth) *
-							mbus->buswidth;
-				odd_bytes = 0;
-			} else {
-				/*
-				 * So now we know how many bytes to transfer
-				 * to get to the nearest boundary.  The next
-				 * LLI will past the boundary.  However, we
-				 * may be working to a boundary on the slave
-				 * bus.  We need to ensure the master stays
-				 * aligned, and that we are working in
-				 * multiples of the bus widths.
-				 */
-				odd_bytes = lli_len % mbus->buswidth;
-				lli_len -= odd_bytes;
-
-			}
-
-			if (lli_len) {
-				/*
-				 * Check against minimum bus alignment:
-				 * Calculate actual transfer size in relation
-				 * to bus width an get a maximum remainder of
-				 * the smallest bus width - 1
-				 */
-				/* FIXME: use round_down()? */
-				tsize = lli_len / min(mbus->buswidth,
-						      sbus->buswidth);
-				lli_len	= tsize * min(mbus->buswidth,
-						      sbus->buswidth);
-
-				if (target_len != lli_len) {
-					dev_vdbg(&pl08x->adev->dev,
-					"%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
-					__func__, target_len, lli_len, txd->len);
-				}
-
-				cctl = pl08x_cctl_bits(cctl,
-						       bd.srcbus.buswidth,
-						       bd.dstbus.buswidth,
-						       tsize);
-
-				dev_vdbg(&pl08x->adev->dev,
-					"%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
-					__func__, lli_len, bd.remainder);
-				pl08x_fill_lli_for_desc(&bd, num_llis++,
-					lli_len, cctl);
-				total_bytes += lli_len;
-			}
-
-
-			if (odd_bytes) {
-				/*
-				 * Creep past the boundary, maintaining
-				 * master alignment
-				 */
-				int j;
-				for (j = 0; (j < mbus->buswidth)
-						&& (bd.remainder); j++) {
-					cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-					dev_vdbg(&pl08x->adev->dev,
-						"%s align with boundary, single byte (remain 0x%08zx)\n",
-						__func__, bd.remainder);
-					pl08x_fill_lli_for_desc(&bd,
-						num_llis++, 1, cctl);
-					total_bytes++;
-				}
-			}
+			cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+					bd.dstbus.buswidth, tsize);
+			pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl);
+			total_bytes += lli_len;
 		}
 
 		/*
 		 * Send any odd bytes
 		 */
-		while (bd.remainder) {
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+		if (bd.remainder) {
 			dev_vdbg(&pl08x->adev->dev,
-				"%s align with boundary, single odd byte (remain %zu)\n",
+				"%s align with boundary, send odd bytes (remain %zu)\n",
 				__func__, bd.remainder);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
+			prep_byte_width_lli(&bd, &cctl, bd.remainder,
+					num_llis++, &total_bytes);
 		}
 	}
+
 	if (total_bytes != txd->len) {
 		dev_err(&pl08x->adev->dev,
 			"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
@@ -917,9 +845,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
 	 * need, but for slaves the physical signals may be muxed!
 	 * Can the platform allow us to use this channel?
 	 */
-	if (plchan->slave &&
-	    ch->signal < 0 &&
-	    pl08x->pd->get_signal) {
+	if (plchan->slave && pl08x->pd->get_signal) {
 		ret = pl08x->pd->get_signal(plchan);
 		if (ret < 0) {
 			dev_dbg(&pl08x->adev->dev,
@@ -1008,10 +934,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
  * If slaves are relying on interrupts to signal completion this function
  * must not be called with interrupts disabled.
  */
-static enum dma_status
-pl08x_dma_tx_status(struct dma_chan *chan,
-		    dma_cookie_t cookie,
-		    struct dma_tx_state *txstate)
+static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	dma_cookie_t last_used;
@@ -1253,7 +1177,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
 
 	num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
 	if (!num_llis) {
-		kfree(txd);
+		spin_lock_irqsave(&plchan->lock, flags);
+		pl08x_free_txd(pl08x, txd);
+		spin_unlock_irqrestore(&plchan->lock, flags);
 		return -EINVAL;
 	}
 
@@ -1301,7 +1227,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
 static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
 	unsigned long flags)
 {
-	struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+	struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
 
 	if (txd) {
 		dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
@@ -1367,7 +1293,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
 	struct pl08x_txd *txd;
-	int ret;
+	int ret, tmp;
 
 	/*
 	 * Current implementation ASSUMES only one sg
@@ -1401,12 +1327,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	txd->len = sgl->length;
 
 	if (direction == DMA_TO_DEVICE) {
-		txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		txd->cctl = plchan->dst_cctl;
 		txd->src_addr = sgl->dma_address;
 		txd->dst_addr = plchan->dst_addr;
 	} else if (direction == DMA_FROM_DEVICE) {
-		txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		txd->cctl = plchan->src_cctl;
 		txd->src_addr = plchan->src_addr;
 		txd->dst_addr = sgl->dma_address;
@@ -1416,6 +1340,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		return NULL;
 	}
 
+	if (plchan->cd->device_fc)
+		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+			PL080_FLOW_PER2MEM_PER;
+	else
+		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+			PL080_FLOW_PER2MEM;
+
+	txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+
 	ret = pl08x_prep_channel_resources(plchan, txd);
 	if (ret)
 		return NULL;
@@ -1489,9 +1422,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 
 bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
 {
-	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_dma_chan *plchan;
 	char *name = chan_id;
 
+	/* Reject channels for devices not bound to this driver */
+	if (chan->device->dev->driver != &pl08x_amba_driver.drv)
+		return false;
+
+	plchan = to_pl08x_chan(chan);
+
 	/* Check that the channel is not taken! */
 	if (!strcmp(plchan->name, name))
 		return true;
@@ -1507,13 +1446,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
  */
 static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
 {
-	u32 val;
-
-	val = readl(pl08x->base + PL080_CONFIG);
-	val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
-	/* We implicitly clear bit 1 and that means little-endian mode */
-	val |= PL080_CONFIG_ENABLE;
-	writel(val, pl08x->base + PL080_CONFIG);
+	writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
 }
 
 static void pl08x_unmap_buffers(struct pl08x_txd *txd)
@@ -1589,8 +1522,8 @@ static void pl08x_tasklet(unsigned long data)
 		 */
 		list_for_each_entry(waiting, &pl08x->memcpy.channels,
 				    chan.device_node) {
-		  if (waiting->state == PL08X_CHAN_WAITING &&
-			    waiting->waiting != NULL) {
+			if (waiting->state == PL08X_CHAN_WAITING &&
+				waiting->waiting != NULL) {
 				int ret;
 
 				/* This should REALLY not fail now */
@@ -1630,38 +1563,40 @@ static void pl08x_tasklet(unsigned long data)
 static irqreturn_t pl08x_irq(int irq, void *dev)
 {
 	struct pl08x_driver_data *pl08x = dev;
-	u32 mask = 0;
-	u32 val;
-	int i;
+	u32 mask = 0, err, tc, i;
 
-	val = readl(pl08x->base + PL080_ERR_STATUS);
-	if (val) {
-		/* An error interrupt (on one or more channels) */
-		dev_err(&pl08x->adev->dev,
-			"%s error interrupt, register value 0x%08x\n",
-				__func__, val);
-		/*
-		 * Simply clear ALL PL08X error interrupts,
-		 * regardless of channel and cause
-		 * FIXME: should be 0x00000003 on PL081 really.
-		 */
-		writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+	/* check & clear - ERR & TC interrupts */
+	err = readl(pl08x->base + PL080_ERR_STATUS);
+	if (err) {
+		dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
+			__func__, err);
+		writel(err, pl08x->base + PL080_ERR_CLEAR);
 	}
-	val = readl(pl08x->base + PL080_INT_STATUS);
+	tc = readl(pl08x->base + PL080_INT_STATUS);
+	if (tc)
+		writel(tc, pl08x->base + PL080_TC_CLEAR);
+
+	if (!err && !tc)
+		return IRQ_NONE;
+
 	for (i = 0; i < pl08x->vd->channels; i++) {
-		if ((1 << i) & val) {
+		if (((1 << i) & err) || ((1 << i) & tc)) {
 			/* Locate physical channel */
 			struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
 			struct pl08x_dma_chan *plchan = phychan->serving;
 
+			if (!plchan) {
+				dev_err(&pl08x->adev->dev,
+					"%s Error TC interrupt on unused channel: 0x%08x\n",
+					__func__, i);
+				continue;
+			}
+
 			/* Schedule tasklet on this channel */
 			tasklet_schedule(&plchan->tasklet);
-
 			mask |= (1 << i);
 		}
 	}
-	/* Clear only the terminal interrupts on channels we processed */
-	writel(mask, pl08x->base + PL080_TC_CLEAR);
 
 	return mask ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -1685,9 +1620,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
  * Make a local wrapper to hold required data
  */
 static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
-					   struct dma_device *dmadev,
-					   unsigned int channels,
-					   bool slave)
+		struct dma_device *dmadev, unsigned int channels, bool slave)
 {
 	struct pl08x_dma_chan *chan;
 	int i;
@@ -1700,7 +1633,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
 	 * to cope with that situation.
 	 */
 	for (i = 0; i < channels; i++) {
-		chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
+		chan = kzalloc(sizeof(*chan), GFP_KERNEL);
 		if (!chan) {
 			dev_err(&pl08x->adev->dev,
 				"%s no memory for channel\n", __func__);
@@ -1728,7 +1661,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
 			kfree(chan);
 			continue;
 		}
-		dev_info(&pl08x->adev->dev,
+		dev_dbg(&pl08x->adev->dev,
 			 "initialize virtual channel \"%s\"\n",
 			 chan->name);
 
@@ -1837,9 +1770,9 @@ static const struct file_operations pl08x_debugfs_operations = {
 static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
 {
 	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
-				   NULL, pl08x,
-				   &pl08x_debugfs_operations);
+	(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
+			S_IFREG | S_IRUGO, NULL, pl08x,
+			&pl08x_debugfs_operations);
 }
 
 #else
@@ -1860,12 +1793,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 		return ret;
 
 	/* Create the driver state holder */
-	pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
+	pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
 	if (!pl08x) {
 		ret = -ENOMEM;
 		goto out_no_pl08x;
 	}
 
+	pm_runtime_set_active(&adev->dev);
+	pm_runtime_enable(&adev->dev);
+
 	/* Initialize memcpy engine */
 	dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
 	pl08x->memcpy.dev = &adev->dev;
@@ -1939,7 +1875,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 
 	/* Initialize physical channels */
-	pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
+	pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
 			GFP_KERNEL);
 	if (!pl08x->phy_chans) {
 		dev_err(&adev->dev, "%s failed to allocate "
@@ -1956,9 +1892,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 		spin_lock_init(&ch->lock);
 		ch->serving = NULL;
 		ch->signal = -1;
-		dev_info(&adev->dev,
-			 "physical channel %d is %s\n", i,
-			 pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+		dev_dbg(&adev->dev, "physical channel %d is %s\n",
+			i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
 	}
 
 	/* Register as many memcpy channels as there are physical channels */
@@ -1974,8 +1909,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 
 	/* Register slave channels */
 	ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
-					      pl08x->pd->num_slave_channels,
-					      true);
+			pl08x->pd->num_slave_channels, true);
 	if (ret <= 0) {
 		dev_warn(&pl08x->adev->dev,
 			"%s failed to enumerate slave channels - %d\n",
@@ -2005,6 +1939,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
 		 amba_part(adev), amba_rev(adev),
 		 (unsigned long long)adev->res.start, adev->irq[0]);
+
+	pm_runtime_put(&adev->dev);
 	return 0;
 
 out_no_slave_reg:
@@ -2023,6 +1959,9 @@ out_no_ioremap:
 	dma_pool_destroy(pl08x->pool);
 out_no_lli_pool:
 out_no_platdata:
+	pm_runtime_put(&adev->dev);
+	pm_runtime_disable(&adev->dev);
+
 	kfree(pl08x);
 out_no_pl08x:
 	amba_release_regions(adev);
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6a483eac7b3f..3b99dc62874b 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -107,10 +107,11 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
 {
 	struct at_desc *desc, *_desc;
 	struct at_desc *ret = NULL;
+	unsigned long flags;
 	unsigned int i = 0;
 	LIST_HEAD(tmp_list);
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
 		i++;
 		if (async_tx_test_ack(&desc->txd)) {
@@ -121,7 +122,7 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
 		dev_dbg(chan2dev(&atchan->chan_common),
 				"desc %p not ACKed\n", desc);
 	}
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 	dev_vdbg(chan2dev(&atchan->chan_common),
 		"scanned %u descriptors on freelist\n", i);
 
@@ -129,9 +130,9 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
 	if (!ret) {
 		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
 		if (ret) {
-			spin_lock_bh(&atchan->lock);
+			spin_lock_irqsave(&atchan->lock, flags);
 			atchan->descs_allocated++;
-			spin_unlock_bh(&atchan->lock);
+			spin_unlock_irqrestore(&atchan->lock, flags);
 		} else {
 			dev_err(chan2dev(&atchan->chan_common),
 					"not enough descriptors available\n");
@@ -150,8 +151,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
 {
 	if (desc) {
 		struct at_desc *child;
+		unsigned long flags;
 
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 		list_for_each_entry(child, &desc->tx_list, desc_node)
 			dev_vdbg(chan2dev(&atchan->chan_common),
 					"moving child desc %p to freelist\n",
@@ -160,7 +162,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
 		dev_vdbg(chan2dev(&atchan->chan_common),
 			 "moving desc %p to freelist\n", desc);
 		list_add(&desc->desc_node, &atchan->free_list);
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	}
 }
 
@@ -299,7 +301,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
 
 	/* for cyclic transfers,
 	 * no need to replay callback function while stopping */
-	if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) {
+	if (!atc_chan_is_cyclic(atchan)) {
 		dma_async_tx_callback	callback = txd->callback;
 		void			*param = txd->callback_param;
 
@@ -471,16 +473,17 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan)
 static void atc_tasklet(unsigned long data)
 {
 	struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+	unsigned long flags;
 
-	spin_lock(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
 		atc_handle_error(atchan);
-	else if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+	else if (atc_chan_is_cyclic(atchan))
 		atc_handle_cyclic(atchan);
 	else
 		atc_advance_work(atchan);
 
-	spin_unlock(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
@@ -539,8 +542,9 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
 	struct at_desc		*desc = txd_to_at_desc(tx);
 	struct at_dma_chan	*atchan = to_at_dma_chan(tx->chan);
 	dma_cookie_t		cookie;
+	unsigned long		flags;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	cookie = atc_assign_cookie(atchan, desc);
 
 	if (list_empty(&atchan->active_list)) {
@@ -554,7 +558,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
 		list_add_tail(&desc->desc_node, &atchan->queue);
 	}
 
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	return cookie;
 }
@@ -927,28 +931,29 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
 	struct at_dma		*atdma = to_at_dma(chan->device);
 	int			chan_id = atchan->chan_common.chan_id;
+	unsigned long		flags;
 
 	LIST_HEAD(list);
 
 	dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
 
 	if (cmd == DMA_PAUSE) {
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
 		set_bit(ATC_IS_PAUSED, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else if (cmd == DMA_RESUME) {
-		if (!test_bit(ATC_IS_PAUSED, &atchan->status))
+		if (!atc_chan_is_paused(atchan))
 			return 0;
 
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
 		clear_bit(ATC_IS_PAUSED, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else if (cmd == DMA_TERMINATE_ALL) {
 		struct at_desc	*desc, *_desc;
 		/*
@@ -957,7 +962,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		 * channel. We still have to poll the channel enable bit due
 		 * to AHB/HSB limitations.
 		 */
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		/* disabling channel: must also remove suspend state */
 		dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
@@ -978,7 +983,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		/* if channel dedicated to cyclic operations, free it */
 		clear_bit(ATC_IS_CYCLIC, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else {
 		return -ENXIO;
 	}
@@ -1004,9 +1009,10 @@ atc_tx_status(struct dma_chan *chan,
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
 	dma_cookie_t		last_used;
 	dma_cookie_t		last_complete;
+	unsigned long		flags;
 	enum dma_status		ret;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 
 	last_complete = atchan->completed_cookie;
 	last_used = chan->cookie;
@@ -1021,7 +1027,7 @@ atc_tx_status(struct dma_chan *chan,
 		ret = dma_async_is_complete(cookie, last_complete, last_used);
 	}
 
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	if (ret != DMA_SUCCESS)
 		dma_set_tx_state(txstate, last_complete, last_used,
@@ -1029,7 +1035,7 @@ atc_tx_status(struct dma_chan *chan,
 	else
 		dma_set_tx_state(txstate, last_complete, last_used, 0);
 
-	if (test_bit(ATC_IS_PAUSED, &atchan->status))
+	if (atc_chan_is_paused(atchan))
 		ret = DMA_PAUSED;
 
 	dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n",
@@ -1046,18 +1052,19 @@ atc_tx_status(struct dma_chan *chan,
 static void atc_issue_pending(struct dma_chan *chan)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	unsigned long		flags;
 
 	dev_vdbg(chan2dev(chan), "issue_pending\n");
 
 	/* Not needed for cyclic transfers */
-	if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+	if (atc_chan_is_cyclic(atchan))
 		return;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	if (!atc_chan_is_enabled(atchan)) {
 		atc_advance_work(atchan);
 	}
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 /**
@@ -1073,6 +1080,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 	struct at_dma		*atdma = to_at_dma(chan->device);
 	struct at_desc		*desc;
 	struct at_dma_slave	*atslave;
+	unsigned long		flags;
 	int			i;
 	u32			cfg;
 	LIST_HEAD(tmp_list);
@@ -1116,11 +1124,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
 		list_add_tail(&desc->desc_node, &tmp_list);
 	}
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	atchan->descs_allocated = i;
 	list_splice(&tmp_list, &atchan->free_list);
 	atchan->completed_cookie = chan->cookie = 1;
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	/* channel parameters */
 	channel_writel(atchan, CFG, cfg);
@@ -1293,15 +1301,13 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
 
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask))
+	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
 		atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
-
-	if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
+		/* controller can do slave DMA: can trigger cyclic transfers */
+		dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
 		atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
-
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ||
-	    dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_control = atc_control;
+	}
 
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
@@ -1377,27 +1383,112 @@ static void at_dma_shutdown(struct platform_device *pdev)
 	clk_disable(atdma->clk);
 }
 
+static int at_dma_prepare(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
+
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+		/* wait for transaction completion (except in cyclic case) */
+		if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan))
+			return -EAGAIN;
+	}
+	return 0;
+}
+
+static void atc_suspend_cyclic(struct at_dma_chan *atchan)
+{
+	struct dma_chan	*chan = &atchan->chan_common;
+
+	/* Channel should be paused by user
+	 * do it anyway even if it is not done already */
+	if (!atc_chan_is_paused(atchan)) {
+		dev_warn(chan2dev(chan),
+		"cyclic channel not paused, should be done by channel user\n");
+		atc_control(chan, DMA_PAUSE, 0);
+	}
+
+	/* now preserve additional data for cyclic operations */
+	/* next descriptor address in the cyclic list */
+	atchan->save_dscr = channel_readl(atchan, DSCR);
+
+	vdbg_dump_regs(atchan);
+}
+
 static int at_dma_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
 
-	at_dma_off(platform_get_drvdata(pdev));
+	/* preserve data */
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+		if (atc_chan_is_cyclic(atchan))
+			atc_suspend_cyclic(atchan);
+		atchan->save_cfg = channel_readl(atchan, CFG);
+	}
+	atdma->save_imr = dma_readl(atdma, EBCIMR);
+
+	/* disable DMA controller */
+	at_dma_off(atdma);
 	clk_disable(atdma->clk);
 	return 0;
 }
 
+static void atc_resume_cyclic(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	/* restore channel status for cyclic descriptors list:
+	 * next descriptor in the cyclic list at the time of suspend */
+	channel_writel(atchan, SADDR, 0);
+	channel_writel(atchan, DADDR, 0);
+	channel_writel(atchan, CTRLA, 0);
+	channel_writel(atchan, CTRLB, 0);
+	channel_writel(atchan, DSCR, atchan->save_dscr);
+	dma_writel(atdma, CHER, atchan->mask);
+
+	/* channel pause status should be removed by channel user
+	 * We cannot take the initiative to do it here */
+
+	vdbg_dump_regs(atchan);
+}
+
 static int at_dma_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
 
+	/* bring back DMA controller */
 	clk_enable(atdma->clk);
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	/* restore saved data */
+	dma_writel(atdma, EBCIER, atdma->save_imr);
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+		channel_writel(atchan, CFG, atchan->save_cfg);
+		if (atc_chan_is_cyclic(atchan))
+			atc_resume_cyclic(atchan);
+	}
 	return 0;
 }
 
 static const struct dev_pm_ops at_dma_dev_pm_ops = {
+	.prepare = at_dma_prepare,
 	.suspend_noirq = at_dma_suspend_noirq,
 	.resume_noirq = at_dma_resume_noirq,
 };
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 087dbf1dd39c..aa4c9aebab7c 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -204,6 +204,9 @@ enum atc_status {
  * @status: transmit status information from irq/prep* functions
  *                to tasklet (use atomic operations)
  * @tasklet: bottom half to finish transaction work
+ * @save_cfg: configuration register that is saved on suspend/resume cycle
+ * @save_dscr: for cyclic operations, preserve next descriptor address in
+ *             the cyclic list on suspend/resume cycle
  * @lock: serializes enqueue/dequeue operations to descriptors lists
  * @completed_cookie: identifier for the most recently completed operation
  * @active_list: list of descriptors dmaengine is being running on
@@ -218,6 +221,8 @@ struct at_dma_chan {
 	u8			mask;
 	unsigned long		status;
 	struct tasklet_struct	tasklet;
+	u32			save_cfg;
+	u32			save_dscr;
 
 	spinlock_t		lock;
 
@@ -248,6 +253,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
  * @chan_common: common dmaengine dma_device object members
  * @ch_regs: memory mapped register base
  * @clk: dma controller clock
+ * @save_imr: interrupt mask register that is saved on suspend/resume cycle
  * @all_chan_mask: all channels availlable in a mask
  * @dma_desc_pool: base of DMA descriptor region (DMA address)
  * @chan: channels table to store at_dma_chan structures
@@ -256,6 +262,7 @@ struct at_dma {
 	struct dma_device	dma_common;
 	void __iomem		*regs;
 	struct clk		*clk;
+	u32			save_imr;
 
 	u8			all_chan_mask;
 
@@ -355,6 +362,23 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
 	return !!(dma_readl(atdma, CHSR) & atchan->mask);
 }
 
+/**
+ * atc_chan_is_paused - test channel pause/resume status
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_paused(struct at_dma_chan *atchan)
+{
+	return test_bit(ATC_IS_PAUSED, &atchan->status);
+}
+
+/**
+ * atc_chan_is_cyclic - test if given channel has cyclic property set
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan)
+{
+	return test_bit(ATC_IS_CYCLIC, &atchan->status);
+}
 
 /**
  * set_desc_eol - set end-of-link to descriptor so it will end transfer
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 765f5ff22304..eb1d8641cf5c 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -10,6 +10,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/freezer.h>
 #include <linux/init.h>
 #include <linux/kthread.h>
 #include <linux/module.h>
@@ -251,6 +252,7 @@ static int dmatest_func(void *data)
 	int			i;
 
 	thread_name = current->comm;
+	set_freezable_with_signal();
 
 	ret = -ENOMEM;
 
@@ -305,7 +307,8 @@ static int dmatest_func(void *data)
 		dma_addr_t dma_srcs[src_cnt];
 		dma_addr_t dma_dsts[dst_cnt];
 		struct completion cmp;
-		unsigned long tmo = msecs_to_jiffies(timeout);
+		unsigned long start, tmo, end = 0 /* compiler... */;
+		bool reload = true;
 		u8 align = 0;
 
 		total_tests++;
@@ -404,7 +407,17 @@ static int dmatest_func(void *data)
 		}
 		dma_async_issue_pending(chan);
 
-		tmo = wait_for_completion_timeout(&cmp, tmo);
+		do {
+			start = jiffies;
+			if (reload)
+				end = start + msecs_to_jiffies(timeout);
+			else if (end <= start)
+				end = start + 1;
+			tmo = wait_for_completion_interruptible_timeout(&cmp,
+								end - start);
+			reload = try_to_freeze();
+		} while (tmo == -ERESTARTSYS);
+
 		status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
 
 		if (tmo == 0) {
@@ -477,6 +490,8 @@ err_srcs:
 	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
 			thread_name, total_tests, failed_tests, ret);
 
+	/* terminate all transfers on specified channels */
+	chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
 	if (iterations > 0)
 		while (!kthread_should_stop()) {
 			DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
@@ -499,6 +514,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc)
 		list_del(&thread->node);
 		kfree(thread);
 	}
+
+	/* terminate all transfers on specified channels */
+	dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0);
+
 	kfree(dtc);
 }
 
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7bd7e98548cd..b5cc27dc9a51 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -318,6 +318,7 @@ struct sdma_engine {
 	dma_addr_t			context_phys;
 	struct dma_device		dma_device;
 	struct clk			*clk;
+	struct mutex			channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -415,11 +416,15 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 	dma_addr_t buf_phys;
 	int ret;
 
+	mutex_lock(&sdma->channel_0_lock);
+
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
-	if (!buf_virt)
-		return -ENOMEM;
+	if (!buf_virt) {
+		ret = -ENOMEM;
+		goto err_out;
+	}
 
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
@@ -433,6 +438,9 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
 
 	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
+err_out:
+	mutex_unlock(&sdma->channel_0_lock);
+
 	return ret;
 }
 
@@ -656,6 +664,8 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1);
 
+	mutex_lock(&sdma->channel_0_lock);
+
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
 
@@ -676,6 +686,8 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	ret = sdma_run_channel(&sdma->channel[0]);
 
+	mutex_unlock(&sdma->channel_0_lock);
+
 	return ret;
 }
 
@@ -1131,18 +1143,17 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 			saddr_arr[i] = addr_arr[i];
 }
 
-static int __init sdma_get_firmware(struct sdma_engine *sdma,
-		const char *fw_name)
+static void sdma_load_firmware(const struct firmware *fw, void *context)
 {
-	const struct firmware *fw;
+	struct sdma_engine *sdma = context;
 	const struct sdma_firmware_header *header;
-	int ret;
 	const struct sdma_script_start_addrs *addr;
 	unsigned short *ram_code;
 
-	ret = request_firmware(&fw, fw_name, sdma->dev);
-	if (ret)
-		return ret;
+	if (!fw) {
+		dev_err(sdma->dev, "firmware not found\n");
+		return;
+	}
 
 	if (fw->size < sizeof(*header))
 		goto err_firmware;
@@ -1172,6 +1183,16 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma,
 
 err_firmware:
 	release_firmware(fw);
+}
+
+static int __init sdma_get_firmware(struct sdma_engine *sdma,
+		const char *fw_name)
+{
+	int ret;
+
+	ret = request_firmware_nowait(THIS_MODULE,
+			FW_ACTION_HOTPLUG, fw_name, sdma->dev,
+			GFP_KERNEL, sdma, sdma_load_firmware);
 
 	return ret;
 }
@@ -1269,11 +1290,14 @@ static int __init sdma_probe(struct platform_device *pdev)
 	struct sdma_platform_data *pdata = pdev->dev.platform_data;
 	int i;
 	struct sdma_engine *sdma;
+	s32 *saddr_arr;
 
 	sdma = kzalloc(sizeof(*sdma), GFP_KERNEL);
 	if (!sdma)
 		return -ENOMEM;
 
+	mutex_init(&sdma->channel_0_lock);
+
 	sdma->dev = &pdev->dev;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1310,6 +1334,11 @@ static int __init sdma_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
+	/* initially no scripts available */
+	saddr_arr = (s32 *)sdma->script_addrs;
+	for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+		saddr_arr[i] = -EINVAL;
+
 	if (of_id)
 		pdev->id_entry = of_id->data;
 	sdma->devtype = pdev->id_entry->driver_data;
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index be641cbd36fc..b4588bdd98bb 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -130,6 +130,23 @@ struct mxs_dma_engine {
 	struct mxs_dma_chan		mxs_chans[MXS_DMA_CHANNELS];
 };
 
+static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable)
+{
+	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+	int chan_id = mxs_chan->chan.chan_id;
+	int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR;
+
+	/* enable apbh channel clock */
+	if (dma_is_apbh()) {
+		if (apbh_is_old())
+			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
+				mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+		else
+			writel(1 << chan_id,
+				mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+	}
+}
+
 static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
 {
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@@ -148,38 +165,21 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan)
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
 	int chan_id = mxs_chan->chan.chan_id;
 
+	/* clkgate needs to be enabled before writing other registers */
+	mxs_dma_clkgate(mxs_chan, 1);
+
 	/* set cmd_addr up */
 	writel(mxs_chan->ccw_phys,
 		mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
 
-	/* enable apbh channel clock */
-	if (dma_is_apbh()) {
-		if (apbh_is_old())
-			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
-		else
-			writel(1 << chan_id,
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
-	}
-
 	/* write 1 to SEMA to kick off the channel */
 	writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
 }
 
 static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
 {
-	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
-	int chan_id = mxs_chan->chan.chan_id;
-
 	/* disable apbh channel clock */
-	if (dma_is_apbh()) {
-		if (apbh_is_old())
-			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
-		else
-			writel(1 << chan_id,
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
-	}
+	mxs_dma_clkgate(mxs_chan, 0);
 
 	mxs_chan->status = DMA_SUCCESS;
 }
@@ -338,7 +338,10 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
 	if (ret)
 		goto err_clk;
 
+	/* clkgate needs to be enabled for reset to finish */
+	mxs_dma_clkgate(mxs_chan, 1);
 	mxs_dma_reset_chan(mxs_chan);
+	mxs_dma_clkgate(mxs_chan, 0);
 
 	dma_async_tx_descriptor_init(&mxs_chan->desc, chan);
 	mxs_chan->desc.tx_submit = mxs_dma_tx_submit;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 00eee59e8b33..621134fdba4c 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -17,6 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl330.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
 
 #define NR_DEFAULT_DESC	16
 
@@ -68,6 +70,14 @@ struct dma_pl330_chan {
 	 * NULL if the channel is available to be acquired.
 	 */
 	void *pl330_chid;
+
+	/* For D-to-M and M-to-D channels */
+	int burst_sz; /* the peripheral fifo width */
+	int burst_len; /* the number of burst */
+	dma_addr_t fifo_addr;
+
+	/* for cyclic capability */
+	bool cyclic;
 };
 
 struct dma_pl330_dmac {
@@ -83,6 +93,8 @@ struct dma_pl330_dmac {
 
 	/* Peripheral channels connected to this DMAC */
 	struct dma_pl330_chan *peripherals; /* keep at end */
+
+	struct clk *clk;
 };
 
 struct dma_pl330_desc {
@@ -152,6 +164,31 @@ static inline void free_desc_list(struct list_head *list)
 	spin_unlock_irqrestore(&pdmac->pool_lock, flags);
 }
 
+static inline void handle_cyclic_desc_list(struct list_head *list)
+{
+	struct dma_pl330_desc *desc;
+	struct dma_pl330_chan *pch;
+	unsigned long flags;
+
+	if (list_empty(list))
+		return;
+
+	list_for_each_entry(desc, list, node) {
+		dma_async_tx_callback callback;
+
+		/* Change status to reload it */
+		desc->status = PREP;
+		pch = desc->pchan;
+		callback = desc->txd.callback;
+		if (callback)
+			callback(desc->txd.callback_param);
+	}
+
+	spin_lock_irqsave(&pch->lock, flags);
+	list_splice_tail_init(list, &pch->work_list);
+	spin_unlock_irqrestore(&pch->lock, flags);
+}
+
 static inline void fill_queue(struct dma_pl330_chan *pch)
 {
 	struct dma_pl330_desc *desc;
@@ -205,7 +242,10 @@ static void pl330_tasklet(unsigned long data)
 
 	spin_unlock_irqrestore(&pch->lock, flags);
 
-	free_desc_list(&list);
+	if (pch->cyclic)
+		handle_cyclic_desc_list(&list);
+	else
+		free_desc_list(&list);
 }
 
 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
@@ -236,6 +276,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
 	spin_lock_irqsave(&pch->lock, flags);
 
 	pch->completed = chan->cookie = 1;
+	pch->cyclic = false;
 
 	pch->pl330_chid = pl330_request_channel(&pdmac->pif);
 	if (!pch->pl330_chid) {
@@ -253,25 +294,52 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
 {
 	struct dma_pl330_chan *pch = to_pchan(chan);
-	struct dma_pl330_desc *desc;
+	struct dma_pl330_desc *desc, *_dt;
 	unsigned long flags;
+	struct dma_pl330_dmac *pdmac = pch->dmac;
+	struct dma_slave_config *slave_config;
+	LIST_HEAD(list);
 
-	/* Only supports DMA_TERMINATE_ALL */
-	if (cmd != DMA_TERMINATE_ALL)
+	switch (cmd) {
+	case DMA_TERMINATE_ALL:
+		spin_lock_irqsave(&pch->lock, flags);
+
+		/* FLUSH the PL330 Channel thread */
+		pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
+
+		/* Mark all desc done */
+		list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
+			desc->status = DONE;
+			pch->completed = desc->txd.cookie;
+			list_move_tail(&desc->node, &list);
+		}
+
+		list_splice_tail_init(&list, &pdmac->desc_pool);
+		spin_unlock_irqrestore(&pch->lock, flags);
+		break;
+	case DMA_SLAVE_CONFIG:
+		slave_config = (struct dma_slave_config *)arg;
+
+		if (slave_config->direction == DMA_TO_DEVICE) {
+			if (slave_config->dst_addr)
+				pch->fifo_addr = slave_config->dst_addr;
+			if (slave_config->dst_addr_width)
+				pch->burst_sz = __ffs(slave_config->dst_addr_width);
+			if (slave_config->dst_maxburst)
+				pch->burst_len = slave_config->dst_maxburst;
+		} else if (slave_config->direction == DMA_FROM_DEVICE) {
+			if (slave_config->src_addr)
+				pch->fifo_addr = slave_config->src_addr;
+			if (slave_config->src_addr_width)
+				pch->burst_sz = __ffs(slave_config->src_addr_width);
+			if (slave_config->src_maxburst)
+				pch->burst_len = slave_config->src_maxburst;
+		}
+		break;
+	default:
+		dev_err(pch->dmac->pif.dev, "Not supported command.\n");
 		return -ENXIO;
-
-	spin_lock_irqsave(&pch->lock, flags);
-
-	/* FLUSH the PL330 Channel thread */
-	pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
-
-	/* Mark all desc done */
-	list_for_each_entry(desc, &pch->work_list, node)
-		desc->status = DONE;
-
-	spin_unlock_irqrestore(&pch->lock, flags);
-
-	pl330_tasklet((unsigned long) pch);
+	}
 
 	return 0;
 }
@@ -288,6 +356,9 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
 	pl330_release_channel(pch->pl330_chid);
 	pch->pl330_chid = NULL;
 
+	if (pch->cyclic)
+		list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
+
 	spin_unlock_irqrestore(&pch->lock, flags);
 }
 
@@ -453,7 +524,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
 
 	if (peri) {
 		desc->req.rqtype = peri->rqtype;
-		desc->req.peri = peri->peri_id;
+		desc->req.peri = pch->chan.chan_id;
 	} else {
 		desc->req.rqtype = MEMTOMEM;
 		desc->req.peri = 0;
@@ -524,6 +595,51 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
 	return burst_len;
 }
 
+static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
+		size_t period_len, enum dma_data_direction direction)
+{
+	struct dma_pl330_desc *desc;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	dma_addr_t dst;
+	dma_addr_t src;
+
+	desc = pl330_get_desc(pch);
+	if (!desc) {
+		dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+			__func__, __LINE__);
+		return NULL;
+	}
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		desc->rqcfg.src_inc = 1;
+		desc->rqcfg.dst_inc = 0;
+		src = dma_addr;
+		dst = pch->fifo_addr;
+		break;
+	case DMA_FROM_DEVICE:
+		desc->rqcfg.src_inc = 0;
+		desc->rqcfg.dst_inc = 1;
+		src = pch->fifo_addr;
+		dst = dma_addr;
+		break;
+	default:
+		dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
+		__func__, __LINE__);
+		return NULL;
+	}
+
+	desc->rqcfg.brst_size = pch->burst_sz;
+	desc->rqcfg.brst_len = 1;
+
+	pch->cyclic = true;
+
+	fill_px(&desc->px, dst, src, period_len);
+
+	return &desc->txd;
+}
+
 static struct dma_async_tx_descriptor *
 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 		dma_addr_t src, size_t len, unsigned long flags)
@@ -579,7 +695,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	struct dma_pl330_peri *peri = chan->private;
 	struct scatterlist *sg;
 	unsigned long flags;
-	int i, burst_size;
+	int i;
 	dma_addr_t addr;
 
 	if (unlikely(!pch || !sgl || !sg_len || !peri))
@@ -595,8 +711,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		return NULL;
 	}
 
-	addr = peri->fifo_addr;
-	burst_size = peri->burst_sz;
+	addr = pch->fifo_addr;
 
 	first = NULL;
 
@@ -644,7 +759,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 				sg_dma_address(sg), addr, sg_dma_len(sg));
 		}
 
-		desc->rqcfg.brst_size = burst_size;
+		desc->rqcfg.brst_size = pch->burst_sz;
 		desc->rqcfg.brst_len = 1;
 	}
 
@@ -696,6 +811,30 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		goto probe_err1;
 	}
 
+	pdmac->clk = clk_get(&adev->dev, "dma");
+	if (IS_ERR(pdmac->clk)) {
+		dev_err(&adev->dev, "Cannot get operation clock.\n");
+		ret = -EINVAL;
+		goto probe_err1;
+	}
+
+	amba_set_drvdata(adev, pdmac);
+
+#ifdef CONFIG_PM_RUNTIME
+	/* to use the runtime PM helper functions */
+	pm_runtime_enable(&adev->dev);
+
+	/* enable the power domain */
+	if (pm_runtime_get_sync(&adev->dev)) {
+		dev_err(&adev->dev, "failed to get runtime pm\n");
+		ret = -ENODEV;
+		goto probe_err1;
+	}
+#else
+	/* enable dma clk */
+	clk_enable(pdmac->clk);
+#endif
+
 	irq = adev->irq[0];
 	ret = request_irq(irq, pl330_irq_handler, 0,
 			dev_name(&adev->dev), pi);
@@ -732,6 +871,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 			case MEMTODEV:
 			case DEVTOMEM:
 				dma_cap_set(DMA_SLAVE, pd->cap_mask);
+				dma_cap_set(DMA_CYCLIC, pd->cap_mask);
 				break;
 			default:
 				dev_err(&adev->dev, "DEVTODEV Not Supported\n");
@@ -760,6 +900,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
 	pd->device_free_chan_resources = pl330_free_chan_resources;
 	pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+	pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
 	pd->device_tx_status = pl330_tx_status;
 	pd->device_prep_slave_sg = pl330_prep_slave_sg;
 	pd->device_control = pl330_control;
@@ -771,8 +912,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		goto probe_err4;
 	}
 
-	amba_set_drvdata(adev, pdmac);
-
 	dev_info(&adev->dev,
 		"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
 	dev_info(&adev->dev,
@@ -833,6 +972,13 @@ static int __devexit pl330_remove(struct amba_device *adev)
 	res = &adev->res;
 	release_mem_region(res->start, resource_size(res));
 
+#ifdef CONFIG_PM_RUNTIME
+	pm_runtime_put(&adev->dev);
+	pm_runtime_disable(&adev->dev);
+#else
+	clk_disable(pdmac->clk);
+#endif
+
 	kfree(pdmac);
 
 	return 0;
@@ -846,10 +992,49 @@ static struct amba_id pl330_ids[] = {
 	{ 0, 0 },
 };
 
+#ifdef CONFIG_PM_RUNTIME
+static int pl330_runtime_suspend(struct device *dev)
+{
+	struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+	if (!pdmac) {
+		dev_err(dev, "failed to get dmac\n");
+		return -ENODEV;
+	}
+
+	clk_disable(pdmac->clk);
+
+	return 0;
+}
+
+static int pl330_runtime_resume(struct device *dev)
+{
+	struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+	if (!pdmac) {
+		dev_err(dev, "failed to get dmac\n");
+		return -ENODEV;
+	}
+
+	clk_enable(pdmac->clk);
+
+	return 0;
+}
+#else
+#define pl330_runtime_suspend	NULL
+#define pl330_runtime_resume	NULL
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops pl330_pm_ops = {
+	.runtime_suspend = pl330_runtime_suspend,
+	.runtime_resume = pl330_runtime_resume,
+};
+
 static struct amba_driver pl330_driver = {
 	.drv = {
 		.owner = THIS_MODULE,
 		.name = "dma-pl330",
+		.pm = &pl330_pm_ops,
 	},
 	.id_table = pl330_ids,
 	.probe = pl330_probe,
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd96d4b..ca44d2cceb02 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,10 +95,6 @@ config GPIO_EP93XX
 	depends on ARCH_EP93XX
 	select GPIO_GENERIC
 
-config GPIO_EXYNOS4
-	def_bool y
-	depends on CPU_EXYNOS4210
-
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
@@ -131,18 +127,6 @@ config GPIO_MXS
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
-config GPIO_PLAT_SAMSUNG
-	def_bool y
-	depends on SAMSUNG_GPIOLIB_4BIT
-
-config GPIO_S5PC100
-	def_bool y
-	depends on CPU_S5PC100
-
-config GPIO_S5PV210
-	def_bool y
-	depends on CPU_S5PV210
-
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948c96f0..62db458c850d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
-obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
@@ -38,11 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
-
-obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
-obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
-obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
-
+obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
deleted file mode 100644
index d24b337cf1ac..000000000000
--- a/drivers/gpio/gpio-exynos4.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * EXYNOS4 - GPIOlib support
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	if (pull == S3C_GPIO_PULL_UP)
-		pull = 3;
-
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
-						unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-	if (pull == 3)
-		pull = S3C_GPIO_PULL_UP;
-
-	return pull;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPA0(0),
-			.ngpio	= EXYNOS4_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPA1(0),
-			.ngpio	= EXYNOS4_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPB(0),
-			.ngpio	= EXYNOS4_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC0(0),
-			.ngpio	= EXYNOS4_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC1(0),
-			.ngpio	= EXYNOS4_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD0(0),
-			.ngpio	= EXYNOS4_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD1(0),
-			.ngpio	= EXYNOS4_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE0(0),
-			.ngpio	= EXYNOS4_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE1(0),
-			.ngpio	= EXYNOS4_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE2(0),
-			.ngpio	= EXYNOS4_GPIO_E2_NR,
-			.label	= "GPE2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE3(0),
-			.ngpio	= EXYNOS4_GPIO_E3_NR,
-			.label	= "GPE3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE4(0),
-			.ngpio	= EXYNOS4_GPIO_E4_NR,
-			.label	= "GPE4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF0(0),
-			.ngpio	= EXYNOS4_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF1(0),
-			.ngpio	= EXYNOS4_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF2(0),
-			.ngpio	= EXYNOS4_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF3(0),
-			.ngpio	= EXYNOS4_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPJ0(0),
-			.ngpio	= EXYNOS4_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPJ1(0),
-			.ngpio	= EXYNOS4_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK0(0),
-			.ngpio	= EXYNOS4_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK1(0),
-			.ngpio	= EXYNOS4_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK2(0),
-			.ngpio	= EXYNOS4_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK3(0),
-			.ngpio	= EXYNOS4_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL0(0),
-			.ngpio	= EXYNOS4_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL1(0),
-			.ngpio	= EXYNOS4_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL2(0),
-			.ngpio	= EXYNOS4_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY0(0),
-			.ngpio	= EXYNOS4_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY1(0),
-			.ngpio	= EXYNOS4_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY2(0),
-			.ngpio	= EXYNOS4_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY3(0),
-			.ngpio	= EXYNOS4_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY4(0),
-			.ngpio	= EXYNOS4_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY5(0),
-			.ngpio	= EXYNOS4_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY6(0),
-			.ngpio	= EXYNOS4_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS4_GPX0(0),
-			.ngpio	= EXYNOS4_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS4_GPX1(0),
-			.ngpio	= EXYNOS4_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS4_GPX2(0),
-			.ngpio	= EXYNOS4_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS4_GPX3(0),
-			.ngpio	= EXYNOS4_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPZ(0),
-			.ngpio	= EXYNOS4_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int i;
-	int group = 0;
-	int nr_chips;
-
-	/* GPIO part 1 */
-
-	chip = exynos4_gpio_part1_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
-	/* GPIO part 2 */
-
-	chip = exynos4_gpio_part2_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
-	/* GPIO part 3 */
-
-	chip = exynos4_gpio_part3_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
-	s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
-	return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c
deleted file mode 100644
index ef67f1952a72..000000000000
--- a/drivers/gpio/gpio-plat-samsung.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
-				      unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + GPIOCON_OFF);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, base + GPIOCON_OFF);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned con_offset = offset;
-
-	if (con_offset > 7)
-		con_offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit2(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s3c_gpiolib_add(chip);
-}
diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c
deleted file mode 100644
index 7f87b0c76e0b..000000000000
--- a/drivers/gpio/gpio-s5pc100.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * S5PC100 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
-	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-	int gpioint_group = 0;
-	int i;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PC100_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c
deleted file mode 100644
index eb12f1602de9..000000000000
--- a/drivers/gpio/gpio-s5pv210.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * S5PV210 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
-	{
-		.chip	= {
-			.base	= S5PV210_GPA0(0),
-			.ngpio	= S5PV210_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPA1(0),
-			.ngpio	= S5PV210_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPB(0),
-			.ngpio	= S5PV210_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC0(0),
-			.ngpio	= S5PV210_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC1(0),
-			.ngpio	= S5PV210_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD0(0),
-			.ngpio	= S5PV210_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD1(0),
-			.ngpio	= S5PV210_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE0(0),
-			.ngpio	= S5PV210_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE1(0),
-			.ngpio	= S5PV210_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF0(0),
-			.ngpio	= S5PV210_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF1(0),
-			.ngpio	= S5PV210_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF2(0),
-			.ngpio	= S5PV210_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF3(0),
-			.ngpio	= S5PV210_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG0(0),
-			.ngpio	= S5PV210_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG1(0),
-			.ngpio	= S5PV210_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG2(0),
-			.ngpio	= S5PV210_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG3(0),
-			.ngpio	= S5PV210_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_GPI(0),
-			.ngpio	= S5PV210_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ0(0),
-			.ngpio	= S5PV210_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ1(0),
-			.ngpio	= S5PV210_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ2(0),
-			.ngpio	= S5PV210_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ3(0),
-			.ngpio	= S5PV210_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ4(0),
-			.ngpio	= S5PV210_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP01(0),
-			.ngpio	= S5PV210_GPIO_MP01_NR,
-			.label	= "MP01",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP02(0),
-			.ngpio	= S5PV210_GPIO_MP02_NR,
-			.label	= "MP02",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP03(0),
-			.ngpio	= S5PV210_GPIO_MP03_NR,
-			.label	= "MP03",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP04(0),
-			.ngpio	= S5PV210_GPIO_MP04_NR,
-			.label	= "MP04",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP05(0),
-			.ngpio	= S5PV210_GPIO_MP05_NR,
-			.label	= "MP05",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PV210_GPH0(0),
-			.ngpio	= S5PV210_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PV210_GPH1(0),
-			.ngpio	= S5PV210_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PV210_GPH2(0),
-			.ngpio	= S5PV210_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PV210_GPH3(0),
-			.ngpio	= S5PV210_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
-	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
-	int gpioint_group = 0;
-	int i = 0;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PV210_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
new file mode 100644
index 000000000000..b6be77ae4973
--- /dev/null
+++ b/drivers/gpio/gpio-samsung.c
@@ -0,0 +1,2688 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-fns.h>
+#include <plat/pm.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	if (pull == S3C_GPIO_PULL_UP)
+		pull = 3;
+
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	if (pull == 3)
+		pull = S3C_GPIO_PULL_UP;
+
+	return pull;
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+
+static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+
+static struct samsung_gpio_cfg exynos4_gpio_cfg = {
+	.set_pull	= exynos4_gpio_setpull,
+	.get_pull	= exynos4_gpio_getpull,
+	.set_config	= samsung_gpio_setcfg_4bit,
+	.get_config	= samsung_gpio_getcfg_4bit,
+};
+
+static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
+	.cfg_eint	= 0x3,
+	.set_config	= s5p64x0_gpio_setcfg_rbank,
+	.get_config	= samsung_gpio_getcfg_4bit,
+	.set_pull	= samsung_gpio_setpull_updown,
+	.get_pull	= samsung_gpio_getpull_updown,
+};
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0x0,
+	}, {
+		.cfg_eint	= 0x3,
+	}, {
+		.cfg_eint	= 0x7,
+	}, {
+		.cfg_eint	= 0xF,
+	}, {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+/* The next set of routines are for the case of s5p64x0 bank r */
+
+static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
+					     int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
+		chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
+
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4)
+		return IRQ_EINT0 + offset;
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 24,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 11,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ */
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P64X0_GPG_BASE,
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	8	4Bit	Yes	None
+ * F	2	2Bit	Yes	None
+ * G	14	4Bit[2]	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	5	4Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	11	2Bit	Yes	8
+ * Q	14	2Bit	Yes	None
+ * R	15	4Bit[2]	Yes	None
+ * S	8	2Bit	Yes	None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.chip	= {
+			.base	= S5P6450_GPA(0),
+			.ngpio	= S5P6450_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPB(0),
+			.ngpio	= S5P6450_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPC(0),
+			.ngpio	= S5P6450_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPD(0),
+			.ngpio	= S5P6450_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5P6450_GPK_BASE,
+		.chip	= {
+			.base	= S5P6450_GPK(0),
+			.ngpio	= S5P6450_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPG_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPG(0),
+			.ngpio	= S5P6450_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPH(0),
+			.ngpio	= S5P6450_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6450_GPR(0),
+			.ngpio	= S5P6450_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPF(0),
+			.ngpio	= S5P6450_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPI(0),
+			.ngpio	= S5P6450_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPJ(0),
+			.ngpio	= S5P6450_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPN(0),
+			.ngpio	= S5P6450_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPP(0),
+			.ngpio	= S5P6450_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S5P6450_GPQ_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPQ(0),
+			.ngpio	= S5P6450_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S5P6450_GPS_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPS(0),
+			.ngpio	= S5P6450_GPIO_S_NR,
+			.label	= "GPS",
+		},
+	},
+#endif
+};
+
+/*
+ * S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PC100
+	{
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in S5PV210/S5PC110
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PV210
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in EXYNOS4210
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip exynos4_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPA0(0),
+			.ngpio	= EXYNOS4_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPA1(0),
+			.ngpio	= EXYNOS4_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPB(0),
+			.ngpio	= EXYNOS4_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC0(0),
+			.ngpio	= EXYNOS4_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC1(0),
+			.ngpio	= EXYNOS4_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD0(0),
+			.ngpio	= EXYNOS4_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD1(0),
+			.ngpio	= EXYNOS4_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE0(0),
+			.ngpio	= EXYNOS4_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE1(0),
+			.ngpio	= EXYNOS4_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE2(0),
+			.ngpio	= EXYNOS4_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE3(0),
+			.ngpio	= EXYNOS4_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE4(0),
+			.ngpio	= EXYNOS4_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF0(0),
+			.ngpio	= EXYNOS4_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF1(0),
+			.ngpio	= EXYNOS4_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF2(0),
+			.ngpio	= EXYNOS4_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF3(0),
+			.ngpio	= EXYNOS4_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPJ0(0),
+			.ngpio	= EXYNOS4_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPJ1(0),
+			.ngpio	= EXYNOS4_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK0(0),
+			.ngpio	= EXYNOS4_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK1(0),
+			.ngpio	= EXYNOS4_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK2(0),
+			.ngpio	= EXYNOS4_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK3(0),
+			.ngpio	= EXYNOS4_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL0(0),
+			.ngpio	= EXYNOS4_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL1(0),
+			.ngpio	= EXYNOS4_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL2(0),
+			.ngpio	= EXYNOS4_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY0(0),
+			.ngpio	= EXYNOS4_GPIO_Y0_NR,
+			.label	= "GPY0",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY1(0),
+			.ngpio	= EXYNOS4_GPIO_Y1_NR,
+			.label	= "GPY1",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY2(0),
+			.ngpio	= EXYNOS4_GPIO_Y2_NR,
+			.label	= "GPY2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY3(0),
+			.ngpio	= EXYNOS4_GPIO_Y3_NR,
+			.label	= "GPY3",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY4(0),
+			.ngpio	= EXYNOS4_GPIO_Y4_NR,
+			.label	= "GPY4",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY5(0),
+			.ngpio	= EXYNOS4_GPIO_Y5_NR,
+			.label	= "GPY5",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= EXYNOS4_GPY6(0),
+			.ngpio	= EXYNOS4_GPIO_Y6_NR,
+			.label	= "GPY6",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC00),
+		.config	= &samsung_gpio_cfgs[3],
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= EXYNOS4_GPX0(0),
+			.ngpio	= EXYNOS4_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC20),
+		.config	= &samsung_gpio_cfgs[3],
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= EXYNOS4_GPX1(0),
+			.ngpio	= EXYNOS4_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC40),
+		.config	= &samsung_gpio_cfgs[3],
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= EXYNOS4_GPX2(0),
+			.ngpio	= EXYNOS4_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC60),
+		.config	= &samsung_gpio_cfgs[3],
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= EXYNOS4_GPX3(0),
+			.ngpio	= EXYNOS4_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPZ(0),
+			.ngpio	= EXYNOS4_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	struct samsung_gpio_chip *chip;
+	int i, nr_chips;
+	int group = 0;
+
+	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+
+	if (soc_is_s3c24xx()) {
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	} else if (soc_is_s5p6440()) {
+		samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
+				ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
+				ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
+				ARRAY_SIZE(s5p6440_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
+				ARRAY_SIZE(s5p6440_gpios_rbank));
+	} else if (soc_is_s5p6450()) {
+		samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
+				ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
+				ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
+				ARRAY_SIZE(s5p6450_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
+				ARRAY_SIZE(s5p6450_gpios_rbank));
+	} else if (soc_is_s5pc100()) {
+		group = 0;
+		chip = s5pc100_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_s5pv210()) {
+		group = 0;
+		chip = s5pv210_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_exynos4210()) {
+		group = 0;
+
+		/* gpio part1 */
+		chip = exynos4_gpios_1;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_1);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+
+		/* gpio part2 */
+		chip = exynos4_gpios_2;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_2);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+
+		/* gpio part3 */
+		chip = exynos4_gpios_3;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_3);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+
+#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+#endif
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+/* gpiolib wrappers until these are totally eliminated */
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	int ret;
+
+	WARN_ON(to);	/* should be none of these left */
+
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
+
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
+}
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	/* do this via gpiolib until all users removed */
+
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
+}
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+
+	return __raw_readl(chip->base + 0x04) & (1 << offs);
+}
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif	/* CONFIG_S5P_GPIO_DRVSTR */
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index a04f87d7ee3d..03cfdab99c8f 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -913,9 +913,9 @@ request_done:
 }
 
 static void s3cmci_dma_setup(struct s3cmci_host *host,
-			     enum s3c2410_dmasrc source)
+			     enum dma_data_direction source)
 {
-	static enum s3c2410_dmasrc last_source = -1;
+	static enum dma_data_direction last_source = -1;
 	static int setup_ok;
 
 	if (last_source == source)
@@ -1087,7 +1087,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
 
 	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
 
-	s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+	s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 595dacc7645f..019a7163572f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -131,6 +131,12 @@
 #define RXBUSY    (1<<2)
 #define TXBUSY    (1<<3)
 
+struct s3c64xx_spi_dma_data {
+	unsigned		ch;
+	enum dma_data_direction direction;
+	enum dma_ch	dmach;
+};
+
 /**
  * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
  * @clk: Pointer to the spi clock.
@@ -164,13 +170,14 @@ struct s3c64xx_spi_driver_data {
 	struct work_struct              work;
 	struct list_head                queue;
 	spinlock_t                      lock;
-	enum dma_ch                     rx_dmach;
-	enum dma_ch                     tx_dmach;
 	unsigned long                   sfr_start;
 	struct completion               xfer_completion;
 	unsigned                        state;
 	unsigned                        cur_mode, cur_bpw;
 	unsigned                        cur_speed;
+	struct s3c64xx_spi_dma_data	rx_dma;
+	struct s3c64xx_spi_dma_data	tx_dma;
+	struct samsung_dma_ops		*ops;
 };
 
 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -226,6 +233,78 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_CH_CFG);
 }
 
+static void s3c64xx_spi_dmacb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd;
+	struct s3c64xx_spi_dma_data *dma = data;
+	unsigned long flags;
+
+	if (dma->direction == DMA_FROM_DEVICE)
+		sdd = container_of(data,
+			struct s3c64xx_spi_driver_data, rx_dma);
+	else
+		sdd = container_of(data,
+			struct s3c64xx_spi_driver_data, tx_dma);
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	if (dma->direction == DMA_FROM_DEVICE) {
+		sdd->state &= ~RXBUSY;
+		if (!(sdd->state & TXBUSY))
+			complete(&sdd->xfer_completion);
+	} else {
+		sdd->state &= ~TXBUSY;
+		if (!(sdd->state & RXBUSY))
+			complete(&sdd->xfer_completion);
+	}
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+					unsigned len, dma_addr_t buf)
+{
+	struct s3c64xx_spi_driver_data *sdd;
+	struct samsung_dma_prep_info info;
+
+	if (dma->direction == DMA_FROM_DEVICE)
+		sdd = container_of((void *)dma,
+			struct s3c64xx_spi_driver_data, rx_dma);
+	else
+		sdd = container_of((void *)dma,
+			struct s3c64xx_spi_driver_data, tx_dma);
+
+	info.cap = DMA_SLAVE;
+	info.len = len;
+	info.fp = s3c64xx_spi_dmacb;
+	info.fp_param = dma;
+	info.direction = dma->direction;
+	info.buf = buf;
+
+	sdd->ops->prepare(dma->ch, &info);
+	sdd->ops->trigger(dma->ch);
+}
+
+static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
+{
+	struct samsung_dma_info info;
+
+	sdd->ops = samsung_dma_get_ops();
+
+	info.cap = DMA_SLAVE;
+	info.client = &s3c64xx_spi_dma_client;
+	info.width = sdd->cur_bpw / 8;
+
+	info.direction = sdd->rx_dma.direction;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+	sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
+	info.direction =  sdd->tx_dma.direction;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+	sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
+
+	return 1;
+}
+
 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
@@ -258,10 +337,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 		chcfg |= S3C64XX_SPI_CH_TXCH_ON;
 		if (dma_mode) {
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
-			s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
-						xfer->tx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+			prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
 		} else {
 			switch (sdd->cur_bpw) {
 			case 32:
@@ -293,10 +369,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 			writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
 					| S3C64XX_SPI_PACKET_CNT_EN,
 					regs + S3C64XX_SPI_PACKET_CNT);
-			s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
-						xfer->rx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+			prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
 		}
 	}
 
@@ -482,46 +555,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	}
 }
 
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~RXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
-	/* If the other done */
-	if (!(sdd->state & TXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~TXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
-	/* If the other done */
-	if (!(sdd->state & RXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
 
 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -696,12 +729,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
 			if (use_dma) {
 				if (xfer->tx_buf != NULL
 						&& (sdd->state & TXBUSY))
-					s3c2410_dma_ctrl(sdd->tx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->tx_dma.ch);
 				if (xfer->rx_buf != NULL
 						&& (sdd->state & RXBUSY))
-					s3c2410_dma_ctrl(sdd->rx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->rx_dma.ch);
 			}
 
 			goto out;
@@ -739,30 +770,6 @@ out:
 		msg->complete(msg->context);
 }
 
-static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
-{
-	if (s3c2410_dma_request(sdd->rx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
-	s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
-					sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
-	if (s3c2410_dma_request(sdd->tx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
-		s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
-	s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
-					sdd->sfr_start + S3C64XX_SPI_TX_DATA);
-
-	return 1;
-}
-
 static void s3c64xx_spi_work(struct work_struct *work)
 {
 	struct s3c64xx_spi_driver_data *sdd = container_of(work,
@@ -799,8 +806,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
 	spin_unlock_irqrestore(&sdd->lock, flags);
 
 	/* Free DMA channels */
-	s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
-	s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
 }
 
 static int s3c64xx_spi_transfer(struct spi_device *spi,
@@ -1017,8 +1024,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	sdd->cntrlr_info = sci;
 	sdd->pdev = pdev;
 	sdd->sfr_start = mem_res->start;
-	sdd->tx_dmach = dmatx_res->start;
-	sdd->rx_dmach = dmarx_res->start;
+	sdd->tx_dma.dmach = dmatx_res->start;
+	sdd->tx_dma.direction = DMA_TO_DEVICE;
+	sdd->rx_dma.dmach = dmarx_res->start;
+	sdd->rx_dma.direction = DMA_FROM_DEVICE;
 
 	sdd->cur_bpw = 8;
 
@@ -1106,7 +1115,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 					pdev->id, master->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
 					mem_res->end, mem_res->start,
-					sdd->rx_dmach, sdd->tx_dmach);
+					sdd->rx_dma.dmach, sdd->tx_dma.dmach);
 
 	return 0;
 
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index e6e28f37d8ec..a22662c93981 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -47,6 +47,9 @@ enum {
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
  * @cctl_opt: default options for the channel control register
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -65,6 +68,7 @@ struct pl08x_channel_data {
 	int max_signal;
 	u32 muxval;
 	u32 cctl;
+	bool device_fc;
 	dma_addr_t addr;
 	bool circular_buffer;
 	bool single;
@@ -77,13 +81,11 @@ struct pl08x_channel_data {
  * @addr: current address
  * @maxwidth: the maximum width of a transfer on this bus
  * @buswidth: the width of this bus in bytes: 1, 2 or 4
- * @fill_bytes: bytes required to fill to the next bus memory boundary
  */
 struct pl08x_bus_data {
 	dma_addr_t addr;
 	u8 maxwidth;
 	u8 buswidth;
-	size_t fill_bytes;
 };
 
 /**
@@ -105,8 +107,16 @@ struct pl08x_phy_chan {
 
 /**
  * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @tx: async tx descriptor
+ * @node: node for txd list for channels
+ * @src_addr: src address of txd
+ * @dst_addr: dst address of txd
+ * @len: transfer len in bytes
+ * @direction: direction of transfer
  * @llis_bus: DMA memory address (physical) start for the LLIs
  * @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
  */
 struct pl08x_txd {
 	struct dma_async_tx_descriptor tx;
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index cbee7de7dd36..d12f077a6daf 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -19,12 +19,8 @@ struct dma_pl330_peri {
 	 * Peri_Req i/f of the DMAC that is
 	 * peripheral could be reached from.
 	 */
-	u8 peri_id; /* {0, 31} */
+	u8 peri_id; /* specific dma id */
 	enum pl330_reqtype rqtype;
-
-	/* For M->D and D->M Channels */
-	int burst_sz; /* in power of 2 */
-	dma_addr_t fifo_addr;
 };
 
 struct dma_pl330_platdata {
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fbf40e0713c..ace51af4369f 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -24,8 +24,7 @@
 #include <linux/device.h>
 #include <linux/uio.h>
 #include <linux/dma-direction.h>
-
-struct scatterlist;
+#include <linux/scatterlist.h>
 
 /**
  * typedef dma_cookie_t - an opaque DMA cookie
@@ -519,6 +518,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan,
 			(unsigned long)config);
 }
 
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
+	struct dma_chan *chan, void *buf, size_t len,
+	enum dma_data_direction dir, unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_one(&sg, buf, len);
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
+}
+
 static inline int dmaengine_terminate_all(struct dma_chan *chan)
 {
 	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index f97110e72e85..b4f9b0003685 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -271,7 +271,10 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
 
 	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
 
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
 
 	return 0;
 }
@@ -317,7 +320,10 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
 
 	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
 
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
 
 	return 0;
 }
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index 9465588b02f2..2d622b635e68 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -54,7 +54,6 @@ struct runtime_data {
 	spinlock_t lock;
 	int state;
 	unsigned int dma_loaded;
-	unsigned int dma_limit;
 	unsigned int dma_period;
 	dma_addr_t dma_start;
 	dma_addr_t dma_pos;
@@ -62,77 +61,79 @@ struct runtime_data {
 	struct s3c_dma_params *params;
 };
 
+static void audio_buffdone(void *data);
+
 /* dma_enqueue
  *
  * place a dma buffer onto the queue for the dma system
  * to handle.
-*/
+ */
 static void dma_enqueue(struct snd_pcm_substream *substream)
 {
 	struct runtime_data *prtd = substream->runtime->private_data;
 	dma_addr_t pos = prtd->dma_pos;
 	unsigned int limit;
-	int ret;
+	struct samsung_dma_prep_info dma_info;
 
 	pr_debug("Entered %s\n", __func__);
 
-	if (s3c_dma_has_circular())
-		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-	else
-		limit = prtd->dma_limit;
+	limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
 
 	pr_debug("%s: loaded %d, limit %d\n",
 				__func__, prtd->dma_loaded, limit);
 
-	while (prtd->dma_loaded < limit) {
-		unsigned long len = prtd->dma_period;
+	dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
+	dma_info.direction =
+		(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+		? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	dma_info.fp = audio_buffdone;
+	dma_info.fp_param = substream;
+	dma_info.period = prtd->dma_period;
+	dma_info.len = prtd->dma_period*limit;
 
+	while (prtd->dma_loaded < limit) {
 		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
 
-		if ((pos + len) > prtd->dma_end) {
-			len  = prtd->dma_end - pos;
-			pr_debug("%s: corrected dma len %ld\n", __func__, len);
+		if ((pos + dma_info.period) > prtd->dma_end) {
+			dma_info.period  = prtd->dma_end - pos;
+			pr_debug("%s: corrected dma len %ld\n",
+					__func__, dma_info.period);
 		}
 
-		ret = s3c2410_dma_enqueue(prtd->params->channel,
-			substream, pos, len);
+		dma_info.buf = pos;
+		prtd->params->ops->prepare(prtd->params->ch, &dma_info);
 
-		if (ret == 0) {
-			prtd->dma_loaded++;
-			pos += prtd->dma_period;
-			if (pos >= prtd->dma_end)
-				pos = prtd->dma_start;
-		} else
-			break;
+		prtd->dma_loaded++;
+		pos += prtd->dma_period;
+		if (pos >= prtd->dma_end)
+			pos = prtd->dma_start;
 	}
 
 	prtd->dma_pos = pos;
 }
 
-static void audio_buffdone(struct s3c2410_dma_chan *channel,
-				void *dev_id, int size,
-				enum s3c2410_dma_buffresult result)
+static void audio_buffdone(void *data)
 {
-	struct snd_pcm_substream *substream = dev_id;
-	struct runtime_data *prtd;
+	struct snd_pcm_substream *substream = data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 
 	pr_debug("Entered %s\n", __func__);
 
-	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
-		return;
+	if (prtd->state & ST_RUNNING) {
+		prtd->dma_pos += prtd->dma_period;
+		if (prtd->dma_pos >= prtd->dma_end)
+			prtd->dma_pos = prtd->dma_start;
 
-	prtd = substream->runtime->private_data;
+		if (substream)
+			snd_pcm_period_elapsed(substream);
 
-	if (substream)
-		snd_pcm_period_elapsed(substream);
-
-	spin_lock(&prtd->lock);
-	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-		prtd->dma_loaded--;
-		dma_enqueue(substream);
+		spin_lock(&prtd->lock);
+		if (!samsung_dma_has_circular()) {
+			prtd->dma_loaded--;
+			dma_enqueue(substream);
+		}
+		spin_unlock(&prtd->lock);
 	}
-
-	spin_unlock(&prtd->lock);
 }
 
 static int dma_hw_params(struct snd_pcm_substream *substream,
@@ -144,8 +145,7 @@ static int dma_hw_params(struct snd_pcm_substream *substream,
 	unsigned long totbytes = params_buffer_bytes(params);
 	struct s3c_dma_params *dma =
 		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-	int ret = 0;
-
+	struct samsung_dma_info dma_info;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -163,30 +163,26 @@ static int dma_hw_params(struct snd_pcm_substream *substream,
 		pr_debug("params %p, client %p, channel %d\n", prtd->params,
 			prtd->params->client, prtd->params->channel);
 
-		ret = s3c2410_dma_request(prtd->params->channel,
-					  prtd->params->client, NULL);
+		prtd->params->ops = samsung_dma_get_ops();
 
-		if (ret < 0) {
-			printk(KERN_ERR "failed to get dma channel\n");
-			return ret;
-		}
-
-		/* use the circular buffering if we have it available. */
-		if (s3c_dma_has_circular())
-			s3c2410_dma_setflags(prtd->params->channel,
-					     S3C2410_DMAF_CIRCULAR);
+		dma_info.cap = (samsung_dma_has_circular() ?
+			DMA_CYCLIC : DMA_SLAVE);
+		dma_info.client = prtd->params->client;
+		dma_info.direction =
+			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+			? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		dma_info.width = prtd->params->dma_size;
+		dma_info.fifo = prtd->params->dma_addr;
+		prtd->params->ch = prtd->params->ops->request(
+				prtd->params->channel, &dma_info);
 	}
 
-	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    audio_buffdone);
-
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
 	runtime->dma_bytes = totbytes;
 
 	spin_lock_irq(&prtd->lock);
 	prtd->dma_loaded = 0;
-	prtd->dma_limit = runtime->hw.periods_min;
 	prtd->dma_period = params_period_bytes(params);
 	prtd->dma_start = runtime->dma_addr;
 	prtd->dma_pos = prtd->dma_start;
@@ -202,11 +198,12 @@ static int dma_hw_free(struct snd_pcm_substream *substream)
 
 	pr_debug("Entered %s\n", __func__);
 
-	/* TODO - do we need to ensure DMA flushed */
 	snd_pcm_set_runtime_buffer(substream, NULL);
 
 	if (prtd->params) {
-		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+		prtd->params->ops->flush(prtd->params->ch);
+		prtd->params->ops->release(prtd->params->ch,
+					prtd->params->client);
 		prtd->params = NULL;
 	}
 
@@ -225,23 +222,9 @@ static int dma_prepare(struct snd_pcm_substream *substream)
 	if (!prtd->params)
 		return 0;
 
-	/* channel needs configuring for mem=>device, increment memory addr,
-	 * sync to pclk, half-word transfers to the IIS-FIFO. */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_MEM,
-				      prtd->params->dma_addr);
-	} else {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_HW,
-				      prtd->params->dma_addr);
-	}
-
-	s3c2410_dma_config(prtd->params->channel,
-			   prtd->params->dma_size);
-
 	/* flush the DMA channel */
-	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+	prtd->params->ops->flush(prtd->params->ch);
+
 	prtd->dma_loaded = 0;
 	prtd->dma_pos = prtd->dma_start;
 
@@ -265,14 +248,14 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		prtd->state |= ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+		prtd->params->ops->trigger(prtd->params->ch);
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		prtd->state &= ~ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+		prtd->params->ops->stop(prtd->params->ch);
 		break;
 
 	default:
@@ -291,21 +274,12 @@ dma_pointer(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct runtime_data *prtd = runtime->private_data;
 	unsigned long res;
-	dma_addr_t src, dst;
 
 	pr_debug("Entered %s\n", __func__);
 
-	spin_lock(&prtd->lock);
-	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+	res = prtd->dma_pos - prtd->dma_start;
 
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		res = dst - prtd->dma_start;
-	else
-		res = src - prtd->dma_start;
-
-	spin_unlock(&prtd->lock);
-
-	pr_debug("Pointer %x %x\n", src, dst);
+	pr_debug("Pointer offset: %lu\n", res);
 
 	/* we seem to be getting the odd error from the pcm library due
 	 * to out-of-bounds pointers. this is maybe due to the dma engine
diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
index c50659269a40..7d1ead77ef21 100644
--- a/sound/soc/samsung/dma.h
+++ b/sound/soc/samsung/dma.h
@@ -6,7 +6,7 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
- *  ALSA PCM interface for the Samsung S3C24xx CPU
+ *  ALSA PCM interface for the Samsung SoC
  */
 
 #ifndef _S3C_AUDIO_H
@@ -17,6 +17,8 @@ struct s3c_dma_params {
 	int channel;				/* Channel ID */
 	dma_addr_t dma_addr;
 	int dma_size;			/* Size of the DMA transfer */
+	unsigned ch;
+	struct samsung_dma_ops *ops;
 };
 
 #endif