ARM: SoC non-urgent fixes for v4.6

As usual, we queue up a few fixes that don't seem urgent enough to go in
 through -rc.
 
  - a number of randconfig warning fixes from Arnd
  - various small fixes for OMAP
  - one somewhat larger patch to restore the OMAP3 cpuidle
    tuning that was lost in a cleanup
  - a small regression fix for cns3xxx PCI
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu67XGCrR//JCVInAQK8mBAAjW3INXnuQ84Zvb5RLJS+1aiEEgnuOEwM
 Yvxr+MzSMsXS5V9FMGaUk/bXxfGMFILAQ5j471ZanGZkDZwAiJ2tdwreKlyYMHU3
 9PPWtHKYR6BhIRFYovftVpDkbgw3cwdfyIvves7Aa4XyeGNCQjryNQndZci8IZlN
 5I4ff3ea8ZKsDQ1jDXmYw6QENCZl9M4yatLnaOcfdgCRro5VRvdavqIofk+ynv2S
 McUm5WGr/BKiT92MThWIhIskuMNZiUmm7L3zgOYE2+zUgw6tFvreQvAY+qtxk6qt
 0K4SIV04JGevBHl2CENGF1Kctq5z+n/Jcywd9yJBqYxvWMYgnJokczjkxKTyf9X8
 8eU9LEtJsrAzJYw6TXvyjK0EphTJTwg1kO/wk4/HFIM2B+AzGgcbotakIDokrR/i
 I2rgnCqExQZqdUzhgFHg28a0Bx9y2Giu6wCCkwRZKpKW74d5E6esAsTbvggmXvbN
 35G0MSLTeeZDbvN6xLOMZc7qCfyWlO9huxiHPn0Q9eth8RcqfywB4vbNdEli/P4o
 NW+up5wTo6Ifc9Jgf8z7LB9b56i/9LMkSBh/OdCKfHEZlHi5/dZ/TR21CngtpcX1
 hi91vJLH0axCylBVE599qxJYoWjoR8nHz7kD6G4vqXtiTfVcxozUM5NKSD8AXn+Q
 NhYT2BTUh0o=
 =YJmM
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - a number of randconfig warning fixes from Arnd
   - various small fixes for OMAP
   - one somewhat larger patch to restore the OMAP3 cpuidle tuning that
     was lost in a cleanup
   - a small regression fix for cns3xxx PCI"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  CNS3xxx: Fix PCI cns3xxx_write_config()
  MAINTAINERS: unify email addrs for Kevin Hilman
  CNS3xxx: remove unused *_VIRT definitions
  ARM: OMAP2+: Fix hwmod clock for l4_ls
  soc: TI knav_qmss: fix dma_addr_t printing
  ARM: prima2: always enable reset controller
  ARM: socfpga: hide unused functions
  ARM: ux500: fix ureachable iounmap()
  ARM: ks8695: fix __initdata annotation
  ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
  ARM: mv78xx0: avoid unused function warning
  ARM: orion: only select I2C_BOARDINFO when using I2C
  ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
  ARM: OMAP3: Add cpuidle parameters table for omap3430
  ARM: davinci: make I2C support optional
  ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
  ARM: davinci: avoid unused mityomapl138_pn_info variable
  ARM: davinci: limit DT support to DA850
  ARM: DRA7: hwmod: Add reset data for PCIe
  ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
  ...
This commit is contained in:
Linus Torvalds 2016-03-20 14:26:57 -07:00
commit dae0b74eb7
32 changed files with 195 additions and 121 deletions

View File

@ -7887,7 +7887,7 @@ S: Maintained
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
M: Kevin Hilman <khilman@deeprootsystems.com>
M: Kevin Hilman <khilman@kernel.org>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
@ -7991,7 +7991,7 @@ F: arch/arm/*omap*/usb*
OMAP GPIO DRIVER
M: Grygorii Strashko <grygorii.strashko@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
M: Kevin Hilman <khilman@deeprootsystems.com>
M: Kevin Hilman <khilman@kernel.org>
L: linux-omap@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/gpio/gpio-omap.txt
@ -10048,7 +10048,7 @@ F: arch/arm/mach-s3c24xx/bast-irq.c
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
M: Kevin Hilman <khilman@kernel.org>
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported

View File

@ -622,6 +622,7 @@ config ARCH_DAVINCI
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP

View File

@ -158,6 +158,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
CONFIG_EEPROM_AT24=y
CONFIG_SPI=y
CONFIG_SPI_S3C24XX=y
CONFIG_SPI_SPIDEV=y

View File

@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
CONFIG_EEPROM_AT24=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=m
CONFIG_SPI_S3C24XX=m

View File

@ -162,13 +162,11 @@
#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */
#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000
#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */
#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000
#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */
#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000
#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */
#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000
@ -177,16 +175,13 @@
#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000
#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */
#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000
#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */
#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000
#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */
#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000
#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */
#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000
#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */
#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000
@ -195,7 +190,6 @@
#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000
#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */
#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000
/*
* Testchip peripheral and fpga gic regions

View File

@ -220,13 +220,13 @@ static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
u32 mask = (0x1ull << (size * 8)) - 1;
int shift = (where % 4) * 8;
v = readl_relaxed(base + (where & 0xffc));
v = readl_relaxed(base);
v &= ~(mask << shift);
v |= (val & mask) << shift;
writel_relaxed(v, base + (where & 0xffc));
readl_relaxed(base + (where & 0xffc));
writel_relaxed(v, base);
readl_relaxed(base);
}
static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)

View File

@ -9,7 +9,6 @@ config CP_INTC
config ARCH_DAVINCI_DMx
bool
select CPU_ARM926T
menu "TI DaVinci Implementations"
@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
select ARCH_DAVINCI_DA8XX
# needed on silicon revs 1.0, 1.1:
select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
select ARCH_DAVINCI_DA8XX
select CP_INTC
config ARCH_DAVINCI_DA8XX
bool
select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
@ -58,7 +56,7 @@ comment "DaVinci Board Type"
config MACH_DA8XX_DT
bool "Support DA8XX platforms using device tree"
default y
depends on ARCH_DAVINCI_DA8XX
depends on ARCH_DAVINCI_DA850
select PINCTRL
help
Say y here to include support for TI DaVinci DA850 based using
@ -68,8 +66,6 @@ config MACH_DAVINCI_EVM
bool "TI DM644x EVM"
default ARCH_DAVINCI_DM644x
depends on ARCH_DAVINCI_DM644x
select EEPROM_AT24
select I2C
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@ -77,8 +73,6 @@ config MACH_DAVINCI_EVM
config MACH_SFFSDR
bool "Lyrtech SFFSDR"
depends on ARCH_DAVINCI_DM644x
select EEPROM_AT24
select I2C
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@ -109,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
select EEPROM_AT24
select I2C
select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
@ -123,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
depends on ARCH_DAVINCI_DM365
select EEPROM_AT24
select I2C
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@ -133,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select EEPROM_AT24
select GPIO_PCF857X
select I2C
select GPIO_PCF857X if I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@ -204,8 +192,6 @@ endchoice
config MACH_MITYOMAPL138
bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
depends on ARCH_DAVINCI_DA850
select EEPROM_AT24
select I2C
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at

View File

@ -267,7 +267,7 @@ static struct platform_device rtc_dev = {
static struct snd_platform_data dm644x_evm_snd_data;
/*----------------------------------------------------------------------*/
#ifdef CONFIG_I2C
/*
* I2C GPIO expanders
*/
@ -612,6 +612,7 @@ static void __init evm_init_i2c(void)
i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
#endif
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
@ -780,7 +781,9 @@ static __init void davinci_evm_init(void)
pr_warn("%s: Cannot configure AEMIF\n",
__func__);
#ifdef CONFIG_I2C
evm_leds[7].default_trigger = "nand-disk";
#endif
if (HAS_NOR)
pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
} else if (HAS_NOR)
@ -789,9 +792,10 @@ static __init void davinci_evm_init(void)
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
#ifdef CONFIG_I2C
evm_init_i2c();
davinci_setup_mmc(0, &dm6446evm_mmc_config);
#endif
dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
davinci_serial_init(dm644x_serial_device);

View File

@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = {
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
#ifdef CONFIG_I2C
/* CPLD Register 0 bits to control ATA */
#define DM646X_EVM_ATA_RST BIT(0)
#define DM646X_EVM_ATA_PWD BIT(1)
@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = {
.setup = davinci_get_mac_addr,
.context = (void *)0x7f00,
};
#endif
static u8 dm646x_iis_serializer_direction[] = {
TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
},
};
#ifdef CONFIG_I2C
static struct i2c_client *cpld_client;
static int cpld_video_probe(struct i2c_client *client,
@ -710,6 +713,7 @@ static void __init evm_init_i2c(void)
evm_init_cpld();
evm_init_video();
}
#endif
#define DM6467T_EVM_REF_FREQ 33000000
@ -764,7 +768,10 @@ static __init void evm_init(void)
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
#ifdef CONFIG_I2C
evm_init_i2c();
#endif
davinci_serial_init(dm646x_serial_device);
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);

View File

@ -51,6 +51,7 @@ struct factory_config {
static struct factory_config factory_config;
#ifdef CONFIG_CPU_FREQ
struct part_no_info {
const char *part_no; /* part number string of interest */
int max_freq; /* khz */
@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = {
},
};
#ifdef CONFIG_CPU_FREQ
static void mityomapl138_cpufreq_init(const char *partnum)
{
int i, ret;

View File

@ -8,7 +8,7 @@ config DOVE_LEGACY
config MACH_DOVE_DB
bool "Marvell DB-MV88AP510 Development Board"
select DOVE_LEGACY
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.

View File

@ -27,6 +27,7 @@ menuconfig ARCH_EXYNOS
select S5P_DEV_MFC
select SRAM
select THERMAL
select THERMAL_OF
select MFD_SYSCON
select CLKSRC_EXYNOS_MCT
select POWER_RESET

View File

@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void)
#define S8250_VIRT 0xf4000000
#define S8250_SIZE 0x00100000
static struct __initdata map_desc og_io_desc[] = {
static struct map_desc og_io_desc[] __initdata = {
{
.virtual = S8250_VIRT,
.pfn = __phys_to_pfn(S8250_PHYS),

View File

@ -34,7 +34,7 @@
#include <mach/regs-misc.h>
static struct __initdata map_desc ks8695_io_desc[] = {
static struct map_desc ks8695_io_desc[] __initdata = {
{
.virtual = (unsigned long)KS8695_IO_VA,
.pfn = __phys_to_pfn(KS8695_IO_PA),

View File

@ -405,9 +405,8 @@ void __init mv78xx0_init(void)
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
#ifdef CONFIG_CACHE_FEROCEON_L2
if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2))
feroceon_l2_init(is_l2_writethrough());
#endif
/* Setup root of clk tree */
clk_init();

View File

@ -107,7 +107,7 @@ static struct notifier_block mvebu_hwcc_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static struct notifier_block mvebu_hwcc_pci_nb = {
static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = {
.notifier_call = mvebu_hwcc_notifier,
};

View File

@ -36,7 +36,6 @@
static void __iomem *omap2_ctrl_base;
static s16 omap2_ctrl_offset;
static struct regmap *omap2_ctrl_syscon;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
struct omap3_scratchpad {
@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset)
u32 omap_ctrl_readl(u16 offset)
{
u32 val;
offset &= 0xfffc;
if (!omap2_ctrl_syscon)
val = readl_relaxed(omap2_ctrl_base + offset);
else
regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
&val);
return val;
return readl_relaxed(omap2_ctrl_base + offset);
}
void omap_ctrl_writeb(u8 val, u16 offset)
@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset)
void omap_ctrl_writel(u32 val, u16 offset)
{
offset &= 0xfffc;
if (!omap2_ctrl_syscon)
writel_relaxed(val, omap2_ctrl_base + offset);
else
regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
val);
}
#ifdef CONFIG_ARCH_OMAP3
@ -715,8 +703,6 @@ int __init omap_control_init(void)
if (IS_ERR(syscon))
return PTR_ERR(syscon);
omap2_ctrl_syscon = syscon;
if (of_get_child_by_name(scm_conf, "clocks")) {
ret = omap2_clk_provider_init(scm_conf,
data->index,
@ -724,9 +710,6 @@ int __init omap_control_init(void)
if (ret)
return ret;
}
iounmap(omap2_ctrl_base);
omap2_ctrl_base = NULL;
} else {
/* No scm_conf found, direct access */
ret = omap2_clk_provider_init(np, data->index, NULL,

View File

@ -34,6 +34,7 @@
#include "pm.h"
#include "control.h"
#include "common.h"
#include "soc.h"
/* Mach specific information to be recorded in the C-state driver_data */
struct omap3_idle_statedata {
@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = {
.safe_state_index = 0,
};
/*
* Numbers based on measurements made in October 2009 for PM optimized kernel
* with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
* and worst case latencies).
*/
static struct cpuidle_driver omap3430_idle_driver = {
.name = "omap3430_idle",
.owner = THIS_MODULE,
.states = {
{
.enter = omap3_enter_idle_bm,
.exit_latency = 110 + 162,
.target_residency = 5,
.name = "C1",
.desc = "MPU ON + CORE ON",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 106 + 180,
.target_residency = 309,
.name = "C2",
.desc = "MPU ON + CORE ON",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 107 + 410,
.target_residency = 46057,
.name = "C3",
.desc = "MPU RET + CORE ON",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 121 + 3374,
.target_residency = 46057,
.name = "C4",
.desc = "MPU OFF + CORE ON",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 855 + 1146,
.target_residency = 46057,
.name = "C5",
.desc = "MPU RET + CORE RET",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 7580 + 4134,
.target_residency = 484329,
.name = "C6",
.desc = "MPU OFF + CORE RET",
},
{
.enter = omap3_enter_idle_bm,
.exit_latency = 7505 + 15274,
.target_residency = 484329,
.name = "C7",
.desc = "MPU OFF + CORE OFF",
},
},
.state_count = ARRAY_SIZE(omap3_idle_data),
.safe_state_index = 0,
};
/* Public functions */
/**
@ -333,5 +397,8 @@ int __init omap3_idle_init(void)
if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
return -ENODEV;
if (cpu_is_omap3430())
return cpuidle_register(&omap3430_idle_driver, NULL);
else
return cpuidle_register(&omap3_idle_driver, NULL);
}

View File

@ -3583,14 +3583,14 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = {
.name = "ssi",
.sysc = &omap34xx_ssi_sysc,
};
static struct omap_hwmod omap34xx_ssi_hwmod = {
static struct omap_hwmod omap3xxx_ssi_hwmod = {
.name = "ssi",
.class = &omap34xx_ssi_hwmod_class,
.class = &omap3xxx_ssi_hwmod_class,
.clkdm_name = "core_l4_clkdm",
.main_clk = "ssi_ssr_fck",
.prcm = {
@ -3605,9 +3605,9 @@ static struct omap_hwmod omap34xx_ssi_hwmod = {
};
/* L4 CORE -> SSI */
static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_ssi_hwmod,
.slave = &omap3xxx_ssi_hwmod,
.clk = "ssi_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3760,7 +3760,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap34xx_l4_core__ssi,
&omap3xxx_l4_core__ssi,
NULL
};
@ -3784,6 +3784,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap3xxx_l4_core__ssi,
NULL
};

View File

@ -1482,8 +1482,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
@ -1532,29 +1531,44 @@ static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
};
/* pcie1 */
static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
{ .name = "pcie", .rst_shift = 0 },
};
static struct omap_hwmod dra7xx_pciess1_hwmod = {
.name = "pcie1",
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.rst_lines = dra7xx_pciess1_resets,
.rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets),
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* pcie2 */
static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
{ .name = "pcie", .rst_shift = 1 },
};
/* pcie2 */
static struct omap_hwmod dra7xx_pciess2_hwmod = {
.name = "pcie2",
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.rst_lines = dra7xx_pciess2_resets,
.rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets),
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},

View File

@ -429,6 +429,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = {
static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm81xx_elm_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -478,6 +479,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm81xx_gpio1_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -504,6 +506,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm81xx_gpio2_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -628,7 +631,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = {
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm814x_timer1_hwmod,
.clk = "timer1_fck",
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -665,7 +668,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm814x_timer2_hwmod,
.clk = "timer2_fck",
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -1123,6 +1126,7 @@ static struct omap_hwmod dm81xx_mailbox_hwmod = {
static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm81xx_mailbox_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
@ -1157,6 +1161,7 @@ static struct omap_hwmod dm81xx_spinbox_hwmod = {
static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm81xx_spinbox_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};

View File

@ -360,6 +360,7 @@
/* PRM.L3INIT_PRM register offsets */
#define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000
#define DRA7XX_PM_L3INIT_PWRSTST_OFFSET 0x0004
#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET 0x0010
#define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028
#define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c
#define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030

View File

@ -28,14 +28,14 @@ config ARCH_ORION5X_DT
config MACH_DB88F5281
bool "Marvell Orion-2 Development Board"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-2 (88F5281) Development Board
config MACH_RD88F5182
bool "Marvell Orion-NAS Reference Design"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Marvell Orion-NAS (88F5182) RD2
@ -43,14 +43,14 @@ config MACH_RD88F5182
config MACH_RD88F5182_DT
bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
select ARCH_ORION5X_DT
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the Marvell
Orion-NAS (88F5182) RD2, Flattened Device Tree.
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
KuroBox Pro platform.
@ -58,7 +58,7 @@ config MACH_KUROBOX_PRO
config MACH_DNS323
bool "D-Link DNS-323"
select GENERIC_NET_UTILS
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
D-Link DNS-323 platform.
@ -78,7 +78,7 @@ config MACH_TERASTATION_PRO2
config MACH_LINKSTATION_PRO
bool "Buffalo Linkstation Pro/Live"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation Pro/Live platform. Both v1 and
@ -86,7 +86,7 @@ config MACH_LINKSTATION_PRO
config MACH_LINKSTATION_LSCHL
bool "Buffalo Linkstation Live v3 (LS-CHL)"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation Live v3 (LS-CHL) platform.
@ -100,7 +100,7 @@ config MACH_LINKSTATION_MINI
config MACH_LINKSTATION_LS_HGL
bool "Buffalo Linkstation LS-HGL"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation LS-HGL platform.
@ -139,7 +139,7 @@ config MACH_D2NET_DT
config MACH_NET2BIG
bool "LaCie 2Big Network"
select I2C_BOARDINFO
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network NAS.

View File

@ -2,6 +2,7 @@ menuconfig ARCH_SIRF
bool "CSR SiRF"
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP

View File

@ -405,7 +405,7 @@ config MACH_S3C2416_DT
endif # CPU_S3C2416
if CPU_S3C2440
if CPU_S3C2440 || CPU_S3C2442
config S3C2440_XTAL_12000000
bool
@ -432,6 +432,9 @@ config S3C2440_PLL_16934400
default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
endif
if CPU_S3C2440
comment "S3C2440 Boards"
@ -460,7 +463,6 @@ config MACH_AT2440EVB
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24 if I2C
select LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_BACKLIGHT

View File

@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
#define ADC_NOM_CHG_DETECT_1A 6
#define ADC_NOM_CHG_DETECT_USB 43
#ifdef CONFIG_PCF50633_ADC
static void
gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
{
@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
pcf50633_mbc_usb_curlim_set(pcf, ma);
}
#endif
static struct delayed_work gta02_charger_work;
static int gta02_usb_vbus_draw;

View File

@ -216,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
REGULATOR_SUPPLY("AVDD", "0-001b"),
};
static struct regulator_init_data smdk6410_b_pwr_5v_data = {
static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
.constraints = {
.always_on = 1,
},
@ -300,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
};
/* VDDARM, BUCK1 on J5 */
static struct regulator_init_data smdk6410_vddarm = {
static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
.constraints = {
.name = "PVDD_ARM",
.min_uV = 1000000,
@ -313,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = {
};
/* VDD_INT, BUCK2 on J5 */
static struct regulator_init_data smdk6410_vddint = {
static struct regulator_init_data __maybe_unused smdk6410_vddint = {
.constraints = {
.name = "PVDD_INT",
.min_uV = 1000000,
@ -324,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = {
};
/* VDD_HI, LDO3 on J5 */
static struct regulator_init_data smdk6410_vddhi = {
static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
.constraints = {
.name = "PVDD_HI",
.always_on = 1,
@ -332,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = {
};
/* VDD_PLL, LDO2 on J5 */
static struct regulator_init_data smdk6410_vddpll = {
static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
.constraints = {
.name = "PVDD_PLL",
.always_on = 1,
@ -340,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = {
};
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
.constraints = {
.name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
@ -348,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = {
};
/* VCCM3BT, LDO8 on J5 */
static struct regulator_init_data smdk6410_vccmc3bt = {
static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
.constraints = {
.name = "PVCCM3BT",
.always_on = 1,
@ -356,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = {
};
/* VCCM2MTV, LDO11 on J5 */
static struct regulator_init_data smdk6410_vccm2mtv = {
static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
.constraints = {
.name = "PVCCM2MTV",
.always_on = 1,
@ -364,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = {
};
/* VDD_LCD, LDO12 on J5 */
static struct regulator_init_data smdk6410_vddlcd = {
static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
.constraints = {
.name = "PVDD_LCD",
.always_on = 1,
@ -372,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = {
};
/* VDD_OTGI, LDO9 on J5 */
static struct regulator_init_data smdk6410_vddotgi = {
static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
.constraints = {
.name = "PVDD_OTGI",
.always_on = 1,
@ -380,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = {
};
/* VDD_OTG, LDO14 on J5 */
static struct regulator_init_data smdk6410_vddotg = {
static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
.constraints = {
.name = "PVDD_OTG",
.always_on = 1,
@ -388,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = {
};
/* VDD_ALIVE, LDO15 on J5 */
static struct regulator_init_data smdk6410_vddalive = {
static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
.constraints = {
.name = "PVDD_ALIVE",
.always_on = 1,
@ -396,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = {
};
/* VDD_AUDIO, VLDO_AUDIO on J5 */
static struct regulator_init_data smdk6410_vddaudio = {
static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
.constraints = {
.name = "PVDD_AUDIO",
.always_on = 1,
@ -406,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
.constraints = {
.name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
@ -417,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = {
};
/* Memory */
static struct regulator_init_data wm8350_dcdc3_data = {
static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
.constraints = {
.name = "PVDD_MEM",
.min_uV = 1800000,
@ -437,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
REGULATOR_SUPPLY("DVDD", "0-001b"),
};
static struct regulator_init_data wm8350_dcdc4_data = {
static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
@ -449,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
};
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
.constraints = {
.name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
@ -537,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
.max_uA = 27554,
};
static struct regulator_init_data wm1192_dcdc3 = {
static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
.constraints = {
.name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
@ -548,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */
};
static struct regulator_init_data wm1192_ldo1 = {
static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
.constraints = {
.name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,

View File

@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
scu_enable(socfpga_scu_base_addr);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* platform-specific code to shutdown a CPU
*
@ -116,6 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu)
{
return 1;
}
#endif
static const struct smp_operations socfpga_smp_ops __initconst = {
.smp_prepare_cpus = socfpga_smp_prepare_cpus,

View File

@ -76,17 +76,19 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
static const char *db8500_read_soc_id(void)
{
void __iomem *uid;
const char *retstr;
uid = ioremap(U8500_BB_UID_BASE, 0x20);
if (!uid)
return NULL;
/* Throw these device-specific numbers into the entropy pool */
add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+0),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
iounmap(uid);
return retstr;
}
static struct device * __init db8500_soc_device_init(void)

View File

@ -93,13 +93,13 @@ struct knav_reg_pdsp_regs {
struct knav_reg_acc_command {
u32 command;
u32 queue_mask;
u32 list_phys;
u32 list_dma;
u32 queue_num;
u32 timer_config;
};
struct knav_link_ram_block {
dma_addr_t phys;
dma_addr_t dma;
void *virt;
size_t size;
};

View File

@ -122,8 +122,8 @@ static irqreturn_t knav_acc_int_handler(int irq, void *_instdata)
channel = acc->channel;
list_dma = acc->list_dma[acc->list_index];
list_cpu = acc->list_cpu[acc->list_index];
dev_dbg(kdev->dev, "acc-irq: channel %d, list %d, virt %p, phys %x\n",
channel, acc->list_index, list_cpu, list_dma);
dev_dbg(kdev->dev, "acc-irq: channel %d, list %d, virt %p, dma %pad\n",
channel, acc->list_index, list_cpu, &list_dma);
if (atomic_read(&acc->retrigger_count)) {
atomic_dec(&acc->retrigger_count);
__knav_acc_notify(range, acc);
@ -297,12 +297,12 @@ knav_acc_write(struct knav_device *kdev, struct knav_pdsp_info *pdsp,
u32 result;
dev_dbg(kdev->dev, "acc command %08x %08x %08x %08x %08x\n",
cmd->command, cmd->queue_mask, cmd->list_phys,
cmd->command, cmd->queue_mask, cmd->list_dma,
cmd->queue_num, cmd->timer_config);
writel_relaxed(cmd->timer_config, &pdsp->acc_command->timer_config);
writel_relaxed(cmd->queue_num, &pdsp->acc_command->queue_num);
writel_relaxed(cmd->list_phys, &pdsp->acc_command->list_phys);
writel_relaxed(cmd->list_dma, &pdsp->acc_command->list_dma);
writel_relaxed(cmd->queue_mask, &pdsp->acc_command->queue_mask);
writel_relaxed(cmd->command, &pdsp->acc_command->command);
@ -337,7 +337,7 @@ static void knav_acc_setup_cmd(struct knav_device *kdev,
memset(cmd, 0, sizeof(*cmd));
cmd->command = acc->channel;
cmd->queue_mask = queue_mask;
cmd->list_phys = acc->list_dma[0];
cmd->list_dma = (u32)acc->list_dma[0];
cmd->queue_num = info->list_entries << 16;
cmd->queue_num |= queue_base;
@ -591,8 +591,8 @@ int knav_init_acc_range(struct knav_device *kdev,
acc->list_cpu[1] = list_mem + list_size;
acc->list_dma[0] = list_dma;
acc->list_dma[1] = list_dma + list_size;
dev_dbg(kdev->dev, "%s: channel %d, phys %08x, virt %8p\n",
acc->name, acc->channel, list_dma, list_mem);
dev_dbg(kdev->dev, "%s: channel %d, dma %pad, virt %8p\n",
acc->name, acc->channel, &list_dma, list_mem);
}
range->ops = &knav_acc_range_ops;

View File

@ -1023,9 +1023,9 @@ static void knav_queue_setup_region(struct knav_device *kdev,
list_add(&pool->region_inst, &region->pools);
dev_dbg(kdev->dev,
"region %s (%d): size:%d, link:%d@%d, phys:%08x-%08x, virt:%p-%p\n",
"region %s (%d): size:%d, link:%d@%d, dma:%pad-%pad, virt:%p-%p\n",
region->name, id, region->desc_size, region->num_desc,
region->link_index, region->dma_start, region->dma_end,
region->link_index, &region->dma_start, &region->dma_end,
region->virt_start, region->virt_end);
hw_desc_size = (region->desc_size / 16) - 1;
@ -1033,7 +1033,7 @@ static void knav_queue_setup_region(struct knav_device *kdev,
for_each_qmgr(kdev, qmgr) {
regs = qmgr->reg_region + id;
writel_relaxed(region->dma_start, &regs->base);
writel_relaxed((u32)region->dma_start, &regs->base);
writel_relaxed(region->link_index, &regs->start_index);
writel_relaxed(hw_desc_size << 16 | hw_num_desc,
&regs->size_count);
@ -1145,14 +1145,14 @@ static int knav_get_link_ram(struct knav_device *kdev,
* queue_base specified => using internal or onchip
* link ram WARNING - we do not "reserve" this block
*/
block->phys = (dma_addr_t)temp[0];
block->dma = (dma_addr_t)temp[0];
block->virt = NULL;
block->size = temp[1];
} else {
block->size = temp[1];
/* queue_base not specific => allocate requested size */
block->virt = dmam_alloc_coherent(kdev->dev,
8 * block->size, &block->phys,
8 * block->size, &block->dma,
GFP_KERNEL);
if (!block->virt) {
dev_err(kdev->dev, "failed to alloc linkram\n");
@ -1172,18 +1172,18 @@ static int knav_queue_setup_link_ram(struct knav_device *kdev)
for_each_qmgr(kdev, qmgr) {
block = &kdev->link_rams[0];
dev_dbg(kdev->dev, "linkram0: phys:%x, virt:%p, size:%x\n",
block->phys, block->virt, block->size);
writel_relaxed(block->phys, &qmgr->reg_config->link_ram_base0);
dev_dbg(kdev->dev, "linkram0: dma:%pad, virt:%p, size:%x\n",
&block->dma, block->virt, block->size);
writel_relaxed((u32)block->dma, &qmgr->reg_config->link_ram_base0);
writel_relaxed(block->size, &qmgr->reg_config->link_ram_size0);
block++;
if (!block->size)
continue;
dev_dbg(kdev->dev, "linkram1: phys:%x, virt:%p, size:%x\n",
block->phys, block->virt, block->size);
writel_relaxed(block->phys, &qmgr->reg_config->link_ram_base1);
dev_dbg(kdev->dev, "linkram1: dma:%pad, virt:%p, size:%x\n",
&block->dma, block->virt, block->size);
writel_relaxed(block->dma, &qmgr->reg_config->link_ram_base1);
}
return 0;