ixgbe: modify behavior on receiving a HW ECC error.

Currently when we noticed a HW ECC error we would request the use reload
the driver to force a reset of the part.  This was done due to the mistaken
believe that a normal reset would not be sufficient.  Well it turns out it
would be so now we just schedule a reset upon seeing the ECC.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Don Skidmore 2014-02-25 17:58:53 -08:00 committed by David S. Miller
parent 0b95227a7b
commit d773ce2de1
1 changed files with 12 additions and 6 deletions

View File

@ -2630,9 +2630,12 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
switch (hw->mac.type) {
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
if (eicr & IXGBE_EICR_ECC)
e_info(link, "Received unrecoverable ECC Err, please "
"reboot\n");
if (eicr & IXGBE_EICR_ECC) {
e_info(link, "Received ECC Err, initiating reset\n");
adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
ixgbe_service_event_schedule(adapter);
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
}
/* Handle Flow Director Full threshold interrupt */
if (eicr & IXGBE_EICR_FLOW_DIR) {
int reinit_count = 0;
@ -2846,9 +2849,12 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
ixgbe_check_sfp_event(adapter, eicr);
/* Fall through */
case ixgbe_mac_X540:
if (eicr & IXGBE_EICR_ECC)
e_info(link, "Received unrecoverable ECC err, please "
"reboot\n");
if (eicr & IXGBE_EICR_ECC) {
e_info(link, "Received ECC Err, initiating reset\n");
adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
ixgbe_service_event_schedule(adapter);
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
}
ixgbe_check_overtemp_event(adapter, eicr);
break;
default: