diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d66133bf3eb5..786e8b0b2d06 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -15,159 +15,24 @@ if PHYLIB
 config SWPHY
 	bool
 
-comment "MII PHY device drivers"
+comment "MDIO bus device drivers"
 
-config AQUANTIA_PHY
-        tristate "Drivers for the Aquantia PHYs"
-        ---help---
-          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
-
-config AT803X_PHY
-	tristate "Drivers for Atheros AT803X PHYs"
-	---help---
-	  Currently supports the AT8030 and AT8035 model
-
-config AMD_PHY
-	tristate "Drivers for the AMD PHYs"
-	---help---
-	  Currently supports the am79c874
-
-config MARVELL_PHY
-	tristate "Drivers for Marvell PHYs"
-	---help---
-	  Currently has a driver for the 88E1011S
-	
-config DAVICOM_PHY
-	tristate "Drivers for Davicom PHYs"
-	---help---
-	  Currently supports dm9161e and dm9131
-
-config QSEMI_PHY
-	tristate "Drivers for Quality Semiconductor PHYs"
-	---help---
-	  Currently supports the qs6612
-
-config LXT_PHY
-	tristate "Drivers for the Intel LXT PHYs"
-	---help---
-	  Currently supports the lxt970, lxt971
-
-config CICADA_PHY
-	tristate "Drivers for the Cicada PHYs"
-	---help---
-	  Currently supports the cis8204
-
-config VITESSE_PHY
-        tristate "Drivers for the Vitesse PHYs"
-        ---help---
-          Currently supports the vsc8244
-
-config TERANETICS_PHY
-        tristate "Drivers for the Teranetics PHYs"
-        ---help---
-          Currently supports the Teranetics TN2020
-
-config SMSC_PHY
-	tristate "Drivers for SMSC PHYs"
-	---help---
-	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
-
-config BCM_NET_PHYLIB
-	tristate
-
-config BROADCOM_PHY
-	tristate "Drivers for Broadcom PHYs"
-	select BCM_NET_PHYLIB
-	---help---
-	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
-	  BCM5481 and BCM5482 PHYs.
-
-config BCM_CYGNUS_PHY
-	tristate "Drivers for Broadcom Cygnus SoC internal PHY"
-	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
-	depends on MDIO_BCM_IPROC
-	select BCM_NET_PHYLIB
-	---help---
-	  This PHY driver is for the 1G internal PHYs of the Broadcom
-	  Cygnus Family SoC.
-
-	  Currently supports internal PHY's used in the BCM11300,
-	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
-	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.
-
-config BCM63XX_PHY
-	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
-	depends on BCM63XX
-	select BCM_NET_PHYLIB
-	---help---
-	  Currently supports the 6348 and 6358 PHYs.
-
-config BCM7XXX_PHY
-	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
-	select BCM_NET_PHYLIB
-	---help---
-	  Currently supports the BCM7366, BCM7439, BCM7445, and
-	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
-
-config BCM87XX_PHY
-	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
+config MDIO_BCM_IPROC
+	tristate "Broadcom iProc MDIO bus controller"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF_MDIO
 	help
-	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+	  This module provides a driver for the MDIO busses found in the
+	  Broadcom iProc SoC's.
 
-config ICPLUS_PHY
-	tristate "Drivers for ICPlus PHYs"
-	---help---
-	  Currently supports the IP175C and IP1001 PHYs.
-
-config REALTEK_PHY
-	tristate "Drivers for Realtek PHYs"
-	---help---
-	  Supports the Realtek 821x PHY.
-
-config NATIONAL_PHY
-	tristate "Drivers for National Semiconductor PHYs"
-	---help---
-	  Currently supports the DP83865 PHY.
-
-config STE10XP
-	tristate "Driver for STMicroelectronics STe10Xp PHYs"
-	---help---
-	  This is the driver for the STe100p and STe101p PHYs.
-
-config LSI_ET1011C_PHY
-	tristate "Driver for LSI ET1011C PHY"
-	---help---
-	  Supports the LSI ET1011C PHY.
-
-config MICREL_PHY
-	tristate "Driver for Micrel PHYs"
-	---help---
-	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
-
-config DP83848_PHY
-	tristate "Driver for Texas Instruments DP83848 PHY"
-	---help---
-	  Supports the DP83848 PHY.
-
-config DP83867_PHY
-	tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
-	---help---
-	  Currently supports the DP83867 PHY.
-
-config MICROCHIP_PHY
-	tristate "Drivers for Microchip PHYs"
+config MDIO_BCM_UNIMAC
+	tristate "Broadcom UniMAC MDIO bus controller"
+	depends on HAS_IOMEM
 	help
-	  Supports the LAN88XX PHYs.
-
-config FIXED_PHY
-	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
-	depends on PHYLIB
-	select SWPHY
-	---help---
-	  Adds the platform "fixed" MDIO Bus to cover the boards that use
-	  PHYs that are not connected to the real MDIO bus.
-
-	  Currently tested with mpc866ads and mpc8349e-mitx.
+	  This module provides a driver for the Broadcom UniMAC MDIO busses.
+	  This hardware can be found in the Broadcom GENET Ethernet MAC
+	  controllers as well as some Broadcom Ethernet switches such as the
+	  Starfighter 2 switches.
 
 config MDIO_BITBANG
 	tristate "Support for bitbanged MDIO buses"
@@ -178,54 +43,6 @@ config MDIO_BITBANG
 
 	  If in doubt, say N.
 
-config MDIO_GPIO
-	tristate "Support for GPIO lib-based bitbanged MDIO buses"
-	depends on MDIO_BITBANG && GPIOLIB
-	---help---
-	  Supports GPIO lib-based MDIO busses.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mdio-gpio.
-
-config MDIO_CAVIUM
-	tristate
-
-config MDIO_OCTEON
-	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
-	depends on 64BIT
-	depends on HAS_IOMEM
-	select MDIO_CAVIUM
-	help
-	  This module provides a driver for the Octeon and ThunderX MDIO
-	  buses. It is required by the Octeon and ThunderX ethernet device
-	  drivers on some systems.
-
-config MDIO_THUNDER
-	tristate "Support for MDIO buses on ThunderX SOCs"
-	depends on 64BIT
-	depends on PCI
-	select MDIO_CAVIUM
-	help
-	  This driver supports the MDIO interfaces found on Cavium
-	  ThunderX SoCs when the MDIO bus device appears as a PCI
-	  device.
-
-
-config MDIO_SUN4I
-	tristate "Allwinner sun4i MDIO interface support"
-	depends on ARCH_SUNXI
-	help
-	  This driver supports the MDIO interface found in the network
-	  interface units of the Allwinner SoC that have an EMAC (A10,
-	  A12, A10s, etc.)
-
-config MDIO_MOXART
-        tristate "MOXA ART MDIO interface support"
-        depends on ARCH_MOXART
-        help
-          This driver supports the MDIO interface found in the network
-          interface units of the MOXA ART SoC
-
 config MDIO_BUS_MUX
 	tristate
 	depends on OF_MDIO
@@ -235,6 +52,17 @@ config MDIO_BUS_MUX
 	  to a parent bus.  Switching between child busses is done by
 	  device specific drivers.
 
+config MDIO_BUS_MUX_BCM_IPROC
+	tristate "Support for iProc based MDIO bus multiplexers"
+	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select MDIO_BUS_MUX
+	default ARCH_BCM_IPROC
+	help
+	  This module provides a driver for MDIO bus multiplexers found in
+	  iProc based Broadcom SoCs. This multiplexer connects one of several
+	  child MDIO bus to a parent bus. Buses could be internal as well as
+	  external and selection logic lies inside the same multiplexer.
+
 config MDIO_BUS_MUX_GPIO
 	tristate "Support for GPIO controlled MDIO bus multiplexers"
 	depends on OF_GPIO && OF_MDIO
@@ -258,33 +86,159 @@ config MDIO_BUS_MUX_MMIOREG
 
 	  Currently, only 8-bit registers are supported.
 
-config MDIO_BUS_MUX_BCM_IPROC
-	tristate "Support for iProc based MDIO bus multiplexers"
-	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
-	select MDIO_BUS_MUX
-	default ARCH_BCM_IPROC
-	help
-	  This module provides a driver for MDIO bus multiplexers found in
-	  iProc based Broadcom SoCs. This multiplexer connects one of several
-	  child MDIO bus to a parent bus. Buses could be internal as well as
-	  external and selection logic lies inside the same multiplexer.
+config MDIO_CAVIUM
+	tristate
 
-config MDIO_BCM_UNIMAC
-	tristate "Broadcom UniMAC MDIO bus controller"
-	depends on HAS_IOMEM
-	help
-	  This module provides a driver for the Broadcom UniMAC MDIO busses.
-	  This hardware can be found in the Broadcom GENET Ethernet MAC
-	  controllers as well as some Broadcom Ethernet switches such as the
-	  Starfighter 2 switches.
+config MDIO_GPIO
+	tristate "Support for GPIO lib-based bitbanged MDIO buses"
+	depends on MDIO_BITBANG && GPIOLIB
+	---help---
+	  Supports GPIO lib-based MDIO busses.
 
-config MDIO_BCM_IPROC
-	tristate "Broadcom iProc MDIO bus controller"
-	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	  To compile this driver as a module, choose M here: the module
+	  will be called mdio-gpio.
+
+config MDIO_HISI_FEMAC
+	tristate "Hisilicon FEMAC MDIO bus controller"
 	depends on HAS_IOMEM && OF_MDIO
 	help
 	  This module provides a driver for the MDIO busses found in the
-	  Broadcom iProc SoC's.
+	  Hisilicon SoC that have an Fast Ethernet MAC.
+
+config MDIO_MOXART
+        tristate "MOXA ART MDIO interface support"
+        depends on ARCH_MOXART
+        help
+          This driver supports the MDIO interface found in the network
+          interface units of the MOXA ART SoC
+
+config MDIO_OCTEON
+	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
+	depends on 64BIT
+	depends on HAS_IOMEM
+	select MDIO_CAVIUM
+	help
+	  This module provides a driver for the Octeon and ThunderX MDIO
+	  buses. It is required by the Octeon and ThunderX ethernet device
+	  drivers on some systems.
+
+config MDIO_SUN4I
+	tristate "Allwinner sun4i MDIO interface support"
+	depends on ARCH_SUNXI
+	help
+	  This driver supports the MDIO interface found in the network
+	  interface units of the Allwinner SoC that have an EMAC (A10,
+	  A12, A10s, etc.)
+
+config MDIO_THUNDER
+	tristate "Support for MDIO buses on ThunderX SOCs"
+	depends on 64BIT
+	depends on PCI
+	select MDIO_CAVIUM
+	help
+	  This driver supports the MDIO interfaces found on Cavium
+	  ThunderX SoCs when the MDIO bus device appears as a PCI
+	  device.
+
+config MDIO_XGENE
+	tristate "APM X-Gene SoC MDIO bus controller"
+	help
+	  This module provides a driver for the MDIO busses found in the
+	  APM X-Gene SoC's.
+
+comment "MII PHY device drivers"
+
+config AMD_PHY
+	tristate "Drivers for the AMD PHYs"
+	---help---
+	  Currently supports the am79c874
+
+config AQUANTIA_PHY
+        tristate "Drivers for the Aquantia PHYs"
+        ---help---
+          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+
+config AT803X_PHY
+	tristate "Drivers for Atheros AT803X PHYs"
+	---help---
+	  Currently supports the AT8030 and AT8035 model
+
+config BCM63XX_PHY
+	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+	depends on BCM63XX
+	select BCM_NET_PHYLIB
+	---help---
+	  Currently supports the 6348 and 6358 PHYs.
+
+config BCM7XXX_PHY
+	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	select BCM_NET_PHYLIB
+	---help---
+	  Currently supports the BCM7366, BCM7439, BCM7445, and
+	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
+config BCM87XX_PHY
+	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
+	help
+	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+
+config BCM_CYGNUS_PHY
+	tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+	depends on MDIO_BCM_IPROC
+	select BCM_NET_PHYLIB
+	---help---
+	  This PHY driver is for the 1G internal PHYs of the Broadcom
+	  Cygnus Family SoC.
+
+	  Currently supports internal PHY's used in the BCM11300,
+	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
+config BCM_NET_PHYLIB
+	tristate
+
+config BROADCOM_PHY
+	tristate "Drivers for Broadcom PHYs"
+	select BCM_NET_PHYLIB
+	---help---
+	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+	  BCM5481 and BCM5482 PHYs.
+
+config CICADA_PHY
+	tristate "Drivers for the Cicada PHYs"
+	---help---
+	  Currently supports the cis8204
+
+config DAVICOM_PHY
+	tristate "Drivers for Davicom PHYs"
+	---help---
+	  Currently supports dm9161e and dm9131
+
+config DP83848_PHY
+	tristate "Driver for Texas Instruments DP83848 PHY"
+	---help---
+	  Supports the DP83848 PHY.
+
+config DP83867_PHY
+	tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
+	---help---
+	  Currently supports the DP83867 PHY.
+
+config FIXED_PHY
+	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+	depends on PHYLIB
+	select SWPHY
+	---help---
+	  Adds the platform "fixed" MDIO Bus to cover the boards that use
+	  PHYs that are not connected to the real MDIO bus.
+
+	  Currently tested with mpc866ads and mpc8349e-mitx.
+
+config ICPLUS_PHY
+	tristate "Drivers for ICPlus PHYs"
+	---help---
+	  Currently supports the IP175C and IP1001 PHYs.
 
 config INTEL_XWAY_PHY
 	tristate "Driver for Intel XWAY PHYs"
@@ -294,24 +248,71 @@ config INTEL_XWAY_PHY
 	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
 	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 
-config MDIO_HISI_FEMAC
-	tristate "Hisilicon FEMAC MDIO bus controller"
-	depends on HAS_IOMEM && OF_MDIO
-	help
-	  This module provides a driver for the MDIO busses found in the
-	  Hisilicon SoC that have an Fast Ethernet MAC.
+config LSI_ET1011C_PHY
+	tristate "Driver for LSI ET1011C PHY"
+	---help---
+	  Supports the LSI ET1011C PHY.
 
-config MDIO_XGENE
-	tristate "APM X-Gene SoC MDIO bus controller"
+config LXT_PHY
+	tristate "Drivers for the Intel LXT PHYs"
+	---help---
+	  Currently supports the lxt970, lxt971
+
+config MARVELL_PHY
+	tristate "Drivers for Marvell PHYs"
+	---help---
+	  Currently has a driver for the 88E1011S
+
+config MICREL_PHY
+	tristate "Driver for Micrel PHYs"
+	---help---
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config MICROCHIP_PHY
+	tristate "Drivers for Microchip PHYs"
 	help
-	  This module provides a driver for the MDIO busses found in the
-	  APM X-Gene SoC's.
+	  Supports the LAN88XX PHYs.
 
 config MICROSEMI_PHY
     tristate "Drivers for the Microsemi PHYs"
     ---help---
       Currently supports the VSC8531 and VSC8541 PHYs
 
+config NATIONAL_PHY
+	tristate "Drivers for National Semiconductor PHYs"
+	---help---
+	  Currently supports the DP83865 PHY.
+
+config QSEMI_PHY
+	tristate "Drivers for Quality Semiconductor PHYs"
+	---help---
+	  Currently supports the qs6612
+
+config REALTEK_PHY
+	tristate "Drivers for Realtek PHYs"
+	---help---
+	  Supports the Realtek 821x PHY.
+
+config SMSC_PHY
+	tristate "Drivers for SMSC PHYs"
+	---help---
+	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config STE10XP
+	tristate "Driver for STMicroelectronics STe10Xp PHYs"
+	---help---
+	  This is the driver for the STe100p and STe101p PHYs.
+
+config TERANETICS_PHY
+        tristate "Drivers for the Teranetics PHYs"
+        ---help---
+          Currently supports the Teranetics TN2020
+
+config VITESSE_PHY
+        tristate "Drivers for the Vitesse PHYs"
+        ---help---
+          Currently supports the vsc8244
+
 config XILINX_GMII2RGMII
        tristate "Xilinx GMII2RGMII converter driver"
        ---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 73d65ce04454..e58667d111e7 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,53 +1,55 @@
-# Makefile for Linux PHY drivers
+# Makefile for Linux PHY drivers and MDIO bus drivers
 
 libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o
 libphy-$(CONFIG_SWPHY)		+= swphy.o
 
 obj-$(CONFIG_PHYLIB)		+= libphy.o
+
+obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
+obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
+obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o
+obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
+obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
+obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
+obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
+obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
+obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o
+obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o
+
+obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
-obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
-obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
-obj-$(CONFIG_CICADA_PHY)	+= cicada.o
-obj-$(CONFIG_LXT_PHY)		+= lxt.o
-obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
-obj-$(CONFIG_SMSC_PHY)		+= smsc.o
-obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
-obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o
-obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
-obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
-obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
 obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o
 obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
 obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o
-obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
-obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
-obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
-obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
-obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
-obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
+obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+obj-$(CONFIG_CICADA_PHY)	+= cicada.o
+obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
 obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
 obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
 obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
-obj-$(CONFIG_STE10XP)		+= ste10Xp.o
-obj-$(CONFIG_MICREL_PHY)	+= micrel.o
-obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
-obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o
-obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o
-obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
-obj-$(CONFIG_AT803X_PHY)	+= at803x.o
-obj-$(CONFIG_AMD_PHY)		+= amd.o
-obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
-obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o
-obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
-obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o
-obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
-obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
-obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
-obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
-obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
+obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
+obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
-obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
-obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o
+obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+obj-$(CONFIG_LXT_PHY)		+= lxt.o
+obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
+obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
+obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o
+obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
+obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+obj-$(CONFIG_SMSC_PHY)		+= smsc.o
+obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o
+obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o