Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

* 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443
  ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443
  ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443
  ARM: S3C24XX: remove obsolete S3C2416_DMA option
  ARM: S3C24XX: Reuse S3C2443 dma for S3C2416
  ARM: S3C24XX: Fix indentation of dma-s3c2443
  ARM: S3C24XX: Move device setup files to mach directory
  ARM: S3C24XX: Consolidate Simtec extensions
  ARM: S3C24XX: move simtec-specific code to mach directory
  ARM: S3C24XX: Move common-smdk code to mach directory
  ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx
  ARM: s3c2410_defconfig: update s3c2410_defconfig
  ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
  ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
  ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
  ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
  ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  ARM: S3C2410: move s3c2410_baseclk_add to clock.h
  ...

arch/arm/Kconfig

@@ -769,22 +769,21 @@ config ARCH_SA1100
 	help
 	  Support for StrongARM 11x0 based boards.
 
-config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
+config ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
-	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
-	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
-	  the Samsung SMDK2410 development board (and derivatives).
-
-	  Note, the S3C2416 and the S3C2450 are so close that they even share
-	  the same SoC ID code. This means that there is no separate machine
-	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
@@ -1072,12 +1071,10 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-if ARCH_S3C2410
-source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c24xx/Kconfig"
+if ARCH_S3C24XX
 source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
@@ -1594,7 +1591,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
@@ -2120,7 +2117,7 @@ config CPU_FREQ_S3C
 
 config CPU_FREQ_S3C24XX
 	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
 	select CPU_FREQ_S3C
 	help
 	  This enables the CPUfreq driver for the Samsung S3C24XX family

arch/arm/Makefile

@@ -174,7 +174,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2440
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100

arch/arm/boot/compressed/head.S

@@ -58,7 +58,7 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C2410)
+#elif defined(CONFIG_ARCH_S3C24XX)
 		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT

arch/arm/configs/mini2440_defconfig

@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y

arch/arm/configs/s3c2410_defconfig

@@ -3,40 +3,47 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
-CONFIG_ARCH_SMDK2410=y
+CONFIG_CPU_S3C2412=y
+CONFIG_CPU_S3C2416=y
+CONFIG_CPU_S3C2440=y
+CONFIG_CPU_S3C2442=y
+CONFIG_CPU_S3C2443=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_ARCH_BAST=y
 CONFIG_ARCH_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
-CONFIG_MACH_AML_M5900=y
+CONFIG_MACH_QT2410=y
+CONFIG_ARCH_SMDK2410=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
-CONFIG_MACH_QT2410=y
 CONFIG_MACH_JIVE=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
 CONFIG_MACH_SMDK2416=y
 CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_NEO1973_GTA02=y
+CONFIG_MACH_AT2440EVB=y
+CONFIG_MACH_MINI2440=y
+CONFIG_MACH_NEXCODER_2440=y
 CONFIG_MACH_OSIRIS=y
 CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_AT2440EVB=y
-CONFIG_MACH_MINI2440=y
+CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_RX1950=y
+CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_SMDK2443=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -45,7 +52,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
 CONFIG_APM_EMULATION=m
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -58,7 +64,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -80,7 +85,6 @@ CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_DCCP=m
@@ -138,7 +142,6 @@ CONFIG_IP_VS=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
@@ -150,7 +153,6 @@ CONFIG_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -177,8 +179,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -199,7 +199,6 @@ CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -221,9 +220,6 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_ATA_OVER_ETH=m
-CONFIG_EEPROM_AT25=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_93CX6=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=m
@@ -240,7 +236,6 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_MOUSE_APPLETOUCH=m
@@ -274,7 +269,6 @@ CONFIG_JOYSTICK_XPAD_LEDS=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
 CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
 CONFIG_INPUT_KEYSPAN_REMOTE=m
 CONFIG_INPUT_POWERMATE=m
@@ -300,7 +294,6 @@ CONFIG_I2C_SIMTEC=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C24XX=m
-CONFIG_SPI_S3C24XX_GPIO=m
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_TLE62X0=m
 CONFIG_SENSORS_LM75=m
@@ -315,7 +308,6 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_S3C2410=y
 CONFIG_FB_SM501=y
 CONFIG_BACKLIGHT_PWM=m
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -330,10 +322,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_SOC=y
-CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
-CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
-CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -387,9 +375,7 @@ CONFIG_MMC_TEST=m
 CONFIG_MMC_SDHCI=m
 CONFIG_MMC_SPI=m
 CONFIG_MMC_S3C=y
-CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_H1940=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PCA955X=m
@@ -410,8 +396,6 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT4_FS=m
 CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=y
@@ -436,9 +420,6 @@ CONFIG_NFSD=m
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -481,9 +462,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/tct_hammer_defconfig

@@ -14,7 +14,7 @@ CONFIG_SLOB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/mach-s3c2410/Kconfig

@@ -2,42 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
 # cpu frequency scaling support
 
 config S3C2410_CPUFREQ
@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
 	help
 	  Select the PLL table for the S3C2410
 
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select CPU_S3C2410
-	select MACH_SMDK
-	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select CPU_S3C2410
-	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C2410_SETUP_TS
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-        tristate "Control the state of H1940 bluetooth chip"
-        depends on ARCH_H1940
-        select RFKILL
-        help
-          This is a simple driver that is able to control
-          the state of built in bluetooth chip on h1940.
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-config MACH_N30
-	bool "Acer N30 family"
-	select CPU_S3C2410
-	select MACH_N35
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
-	bool
-	help
-	  Internal node in order to enable support for Acer N35 if Acer N30 is
-	  selected.
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select PM_SIMTEC if PM
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
-	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the TinCanTools Hammer Board
-           <http://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select PM_SIMTEC if PM
-	select S3C24XX_DCLK
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
-	bool "QT2410"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	   Say Y here if you are using the Armzone QT2410
-
-endmenu

arch/arm/mach-s3c2410/Makefile

@@ -9,32 +9,6 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
-# Machine support
-
-obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
-obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
-obj-$(CONFIG_MACH_N30)		+= mach-n30.o
-obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
-obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
-obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
-obj-$(CONFIG_MACH_TCT_HAMMER)	+= mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
-
-# Common bits of machine support
-
-obj-$(CONFIG_SIMTEC_NOR)	+= nor-simtec.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE)	+= bast-ide.o

arch/arm/mach-s3c2410/usb-simtec.h

@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/usb-simtec.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * Simtec BAST and Thorcom VR1000 USB port support functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int usb_simtec_init(void);
-

arch/arm/mach-s3c2412/Kconfig

@@ -2,41 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2412
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
-	select S3C2412_DMA if S3C2410_DMA
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2410 && \
-		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
-		   !CPU_S3C2443 && CPU_S3C2412
-	default y if CPU_S3C2412
-
-config S3C2412_DMA
-	bool
-	depends on CPU_S3C2412
-	help
-	  Internal config node for S3C2412 DMA support
-
-config S3C2412_PM
-	bool
-	select S3C2412_PM_SLEEP
-	help
-	  Internal config node to apply S3C2412 power management
-
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs with similar sleep procedure.
-
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx
 
 config S3C2412_CPUFREQ
@@ -46,53 +11,3 @@ config S3C2412_CPUFREQ
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
-menu "S3C2412 Machines"
-
-config MACH_JIVE
-	bool "Logitech Jive"
-	select CPU_S3C2412
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
-	depends on MACH_JIVE && EXPERIMENTAL
-
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select CPU_S3C2412
-	select MACH_S3C2413
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an SMDK2413
-
-config MACH_S3C2413
-	bool
-	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
-
-config MACH_SMDK2412
-	bool "SMDK2412"
-	select MACH_SMDK2413
-	help
-	  Say Y here if you are using an SMDK2412
-
-	  Note, this shares support with SMDK2413, so will automatically
-	  select MACH_SMDK2413.
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select CPU_S3C2412
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an VSTMS board
-
-endmenu

arch/arm/mach-s3c2412/Makefile

@@ -9,16 +9,4 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_CPU_S3C2412)	+= irq.o
-obj-$(CONFIG_CPU_S3C2412)	+= clock.o
-obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o
-obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_JIVE)		+= mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o

arch/arm/mach-s3c2416/Kconfig

@@ -1,60 +0,0 @@
-# arch/arm/mach-s3c2416/Kconfig
-#
-# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
-#
-# Licensed under GPLv2
-
-# note, this also supports the S3C2450 which is so similar it has the same
-# ID code as the S3C2416.
-
-config CPU_S3C2416
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM926T
-	select S3C2416_DMA if S3C2410_DMA
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_CLOCK
-	help
-	  Support for the S3C2416 SoC from the S3C24XX line
-
-config S3C2416_DMA
-	bool
-	depends on CPU_S3C2416
-	help
-	  Internal config node for S3C2416 DMA support
-
-config S3C2416_PM
-	bool
-	select S3C2412_PM_SLEEP
-	help
-	  Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
-	bool
-	select S3C2416_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-menu "S3C2416 Machines"
-
-config MACH_SMDK2416
-	bool "SMDK2416"
-	select CPU_S3C2416
-	select MACH_SMDK
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
-	select S3C2416_PM if PM
-	help
-	  Say Y here if you are using an SMDK2416
-
-endmenu

arch/arm/mach-s3c2416/Makefile

@@ -1,22 +0,0 @@
-# arch/arm/mach-s3c2416/Makefile
-#
-# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
-obj-$(CONFIG_CPU_S3C2416)	+= irq.o
-obj-$(CONFIG_S3C2416_PM)	+= pm.o
-#obj-$(CONFIG_S3C2416_DMA)	+= dma.o
-
-# Device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o

arch/arm/mach-s3c2440/Kconfig

@@ -2,35 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2440
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C2410_DMA
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	bool
-	depends on CPU_S3C2440 || CPU_S3C2442
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
@@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
-	bool
-	depends on CPU_S3C2440
-	help
-	  Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	select TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select PM_H1940 if PM
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	select CPU_S3C2442
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select CPU_S3C2440
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select CPU_S3C2440
-	select EEPROM_AT24
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGER
-	select LEDS_TRIGGER_BACKLIGHT
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select CPU_S3C2442
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
-	select I2C
-	select S3C2410_PWM
-	select S3C_DEV_NAND
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	help
-	   Say Y here if you're using HP iPAQ rx1950
-
-endmenu

arch/arm/mach-s3c2440/Makefile

@@ -9,33 +9,9 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= clock.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma.o
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 
 obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o

arch/arm/mach-s3c2440/common.h

@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C2440 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
-#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-
-void s3c2440_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2443/Kconfig

@@ -1,32 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2443
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2443_DMA if S3C2410_DMA
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_CLOCK
-	help
-	  Support for the S3C2443 SoC from the S3C24XX line
-
-config S3C2443_DMA
-	bool
-	depends on CPU_S3C2443
-	help
-	  Internal config node for S3C2443 DMA support
-
-menu "S3C2443 Machines"
-
-config MACH_SMDK2443
-	bool "SMDK2443"
-	select CPU_S3C2443
-	select MACH_SMDK
-	select S3C_DEV_HSMMC1
-	help
-	  Say Y here if you are using an SMDK2443
-
-endmenu

arch/arm/mach-s3c2443/Makefile

@@ -1,20 +0,0 @@
-# arch/arm/mach-s3c2443/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
-obj-$(CONFIG_CPU_S3C2443)	+= irq.o
-obj-$(CONFIG_CPU_S3C2443)	+= clock.o
-
-obj-$(CONFIG_S3C2443_DMA)	+= dma.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK2443)	+= mach-smdk2443.o

arch/arm/mach-s3c24xx/Kconfig

@@ -0,0 +1,538 @@
+# arch/arm/mach-s3c24xx/Kconfig
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+if ARCH_S3C24XX
+
+menu "SAMSUNG S3C24XX SoCs Support"
+
+comment "S3C24XX SoCs"
+
+config CPU_S3C2410
+	bool "SAMSUNG S3C2410"
+	default y
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select CPU_LLSERIAL_S3C2410
+	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
+
+config CPU_S3C2412
+	bool "SAMSUNG S3C2412"
+	depends on ARCH_S3C24XX
+	select CPU_ARM926T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2412_PM if PM
+	select S3C2412_DMA if S3C24XX_DMA
+	help
+	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2416
+	bool "SAMSUNG S3C2416/S3C2450"
+	depends on ARCH_S3C24XX
+	select CPU_ARM926T
+	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
+	select S3C2443_COMMON
+	select S3C2443_DMA if S3C24XX_DMA
+	select S3C2416_PM if PM
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
+config CPU_S3C2440
+	bool "SAMSUNG S3C2440"
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	select S3C2440_DMA if S3C24XX_DMA
+	help
+	  Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+	bool "SAMSUNG S3C2442"
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	def_bool y
+	depends on CPU_S3C2440 || CPU_S3C2442
+
+config CPU_S3C2443
+	bool "SAMSUNG S3C2443"
+	depends on ARCH_S3C24XX
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
+	select S3C2443_COMMON
+	select S3C2443_DMA if S3C24XX_DMA
+	help
+	  Support for the S3C2443 SoC from the S3C24XX line
+
+# common code
+
+config S3C24XX_SMDK
+	bool
+	help
+	  Common machine code for SMDK2410 and SMDK2440
+
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
+config S3C24XX_SIMTEC_PM
+	bool
+	help
+	  Common power management code for systems that are
+	  compatible with the Simtec style of power management
+
+config S3C24XX_SIMTEC_USB
+	bool
+	help
+	  USB management code for common Simtec S3C24XX boards
+
+config S3C24XX_SETUP_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung TouchScreen.
+
+# cpu-specific sections
+
+if CPU_S3C2410
+
+config S3C2410_DMA
+	bool
+	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
+	help
+	  DMA device selection for S3C2410 and compatible CPUs
+
+config S3C2410_PM
+	bool
+	help
+	  Power Management code common to S3C2410 and better
+
+config S3C24XX_SIMTEC_NOR
+	bool
+	help
+	  Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+	bool
+	select HAVE_PATA_PLATFORM
+	help
+	  Internal node for machines with an BAST style IDE
+	  interface
+
+comment "S3C2410 Boards"
+
+#
+# The "S3C2410 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the American Microsystems M5900 Series
+	  <http://www.amltd.com>
+
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_USB
+	select MACH_BAST_IDE
+	select S3C24XX_DCLK
+	select ISA
+	select S3C_DEV_HWMON
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
+
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
+	help
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
+
+config ARCH_H1940
+	bool "IPAQ H1940"
+	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	select S3C24XX_SETUP_TS
+	help
+	  Say Y here if you are using the HP IPAQ H1940
+
+config H1940BT
+	tristate "Control the state of H1940 bluetooth chip"
+	depends on ARCH_H1940
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on h1940.
+
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
+
+config MACH_N30
+	bool "Acer N30 family"
+	select MACH_N35
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you want suppt for the Acer N30, Acer N35,
+	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+
+config MACH_OTOM
+	bool "NexVision OTOM Board"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_QT2410
+	bool "QT2410"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Armzone QT2410
+
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select S3C24XX_SMDK
+	help
+	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
+	  <http://www.fsforth.de>
+
+config MACH_TCT_HAMMER
+	bool "TCT Hammer Board"
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the TinCanTools Hammer Board
+	  <http://www.tincantools.com>
+
+config MACH_VR1000
+	bool "Thorcom VR1000"
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_DCLK
+	select S3C24XX_SIMTEC_NOR
+	select MACH_BAST_IDE
+	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_USB
+	help
+	  Say Y here if you are using the Thorcom VR1000 board.
+
+endif	# CPU_S3C2410
+
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs such as S3C2416 with similar
+	  sleep procedure.
+
+if CPU_S3C2412
+
+config CPU_S3C2412_ONLY
+	bool
+	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
+		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2443 && CPU_S3C2412
+	default y
+
+config S3C2412_DMA
+	bool
+	help
+	  Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+	bool
+	help
+	  Internal config node to apply S3C2412 power management
+
+comment "S3C2412 Boards"
+
+#
+# The "S3C2412 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_JIVE
+	bool "Logitech Jive"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
+	depends on MACH_JIVE && EXPERIMENTAL
+
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 version of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
+config MACH_SMDK2412
+	bool "SMDK2412"
+	select MACH_SMDK2413
+	help
+	  Say Y here if you are using an SMDK2412
+
+	  Note, this shares support with SMDK2413, so will automatically
+	  select MACH_SMDK2413.
+
+config MACH_SMDK2413
+	bool "SMDK2413"
+	select MACH_S3C2413
+	select S3C24XX_SMDK
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using an SMDK2413
+
+config MACH_VSTMS
+	bool "VMSTMS"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using an VSTMS board
+
+endif	# CPU_S3C2412
+
+if CPU_S3C2416
+
+config S3C2416_PM
+	bool
+	select S3C2412_PM_SLEEP
+	help
+	  Internal config node to apply S3C2416 power management
+
+config S3C2416_SETUP_SDHCI
+	bool
+	select S3C2416_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+comment "S3C2416 Boards"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select S3C24XX_SMDK
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C2416_SETUP_SDHCI
+	help
+	  Say Y here if you are using an SMDK2416
+
+endif	# CPU_S3C2416
+
+if CPU_S3C2440
+
+config S3C2440_DMA
+	bool
+	help
+	  Support for S3C2440 specific DMA code5A
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select S3C24XX_DCLK
+	select S3C24XX_SIMTEC_PM if PM
+	select HAVE_PATA_PLATFORM
+	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Simtec Electronics ANUBIS
+	  development system
+
+config MACH_AT2440EVB
+	bool "Avantech AT2440EVB development board"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+	bool "MINI2440 development board"
+	select EEPROM_AT24
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGER
+	select LEDS_TRIGGER_BACKLIGHT
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+	  available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+	bool "NexVision NEXCODER 2440 Light Board"
+	select S3C2440_XTAL_12000000
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C24XX_DCLK
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Simtec IM2440D20 module, also
+	  known as the Osiris.
+
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
+config MACH_RX3715
+	bool "HP iPAQ rx3715"
+	select S3C2440_XTAL_16934400
+	select PM_H1940 if PM
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+	bool "SMDK2440"
+	select S3C2440_XTAL_16934400
+	select S3C24XX_SMDK
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+	bool "SMDK2440 with S3C2440 CPU module"
+	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
+
+endif	# CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	select S3C_DEV_USB_HOST
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+	bool "HP iPAQ rx1950"
+	select S3C24XX_DCLK
+	select PM_H1940 if PM
+	select I2C
+	select S3C2410_PWM
+	select S3C_DEV_NAND
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_16934400
+	help
+	   Say Y here if you're using HP iPAQ rx1950
+
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+
+endif	# CPU_S3C2440
+
+if CPU_S3C2443 || CPU_S3C2416
+
+config S3C2443_COMMON
+	bool
+	help
+	  Common code for the S3C2443 and similar processors, which includes
+	  the S3C2416 and S3C2450.
+
+config S3C2443_DMA
+	bool
+	help
+	  Internal config node for S3C2443 DMA support
+
+endif	# CPU_S3C2443 || CPU_S3C2416
+
+if CPU_S3C2443
+
+comment "S3C2443 Boards"
+
+config MACH_SMDK2443
+	bool "SMDK2443"
+	select S3C24XX_SMDK
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2443
+
+endif	# CPU_S3C2443
+
+endmenu	# SAMSUNG S3C24XX SoCs Support
+
+endif	# ARCH_S3C24XX

arch/arm/mach-s3c24xx/Makefile

@@ -0,0 +1,95 @@
+# arch/arm/mach-s3c24xx/Makefile
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# core
+
+obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
+
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
+obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
+
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
+
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
+
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
+
+# common code
+
+obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
+obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
+
+#
+# machine support
+# following is ordered alphabetically by option text.
+#
+
+obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
+obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o
+obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
+obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
+obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
+obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
+obj-$(CONFIG_MACH_N30)			+= mach-n30.o
+obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
+obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
+obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
+obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
+obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o
+
+obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
+
+obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
+
+obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
+obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
+obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
+
+obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
+
+# common bits of machine support
+
+obj-$(CONFIG_S3C24XX_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
+obj-$(CONFIG_S3C24XX_SIMTEC_NOR)	+= simtec-nor.o
+obj-$(CONFIG_S3C24XX_SIMTEC_PM)		+= simtec-pm.o
+obj-$(CONFIG_S3C24XX_SIMTEC_USB)	+= simtec-usb.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
+
+# device setup
+
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
+obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o

arch/arm/mach-s3c24xx/clock-s3c2416.c

@@ -15,7 +15,6 @@
 #include <linux/clk.h>
 
 #include <plat/s3c2416.h>
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/clock-s3c2443.c

@@ -179,11 +179,6 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
-void __init_or_cpufreq s3c2443_setup_clocks(void)
-{
-	s3c2443_common_setup_clocks(s3c2443_get_mpll);
-}
-
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -196,8 +191,6 @@ void __init s3c2443_init_clocks(int xtal)
 				   armdiv, ARRAY_SIZE(armdiv),
 				   S3C2443_CLKDIV0_ARMDIV_MASK);
 
-	s3c2443_setup_clocks();
-
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)

arch/arm/mach-s3c24xx/common-s3c2443.c

@@ -1,9 +1,18 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
+/*
+ * Common code for SoCs starting with the S3C2443
  *
  * Copyright (c) 2007, 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2443 Clock control suport - common code
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  */
 
 #include <linux/init.h>
@@ -12,7 +21,6 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
@@ -160,6 +168,44 @@ static struct clk clk_prediv = {
 	},
 };
 
+/* hclk divider
+ *
+ * divides the prediv and provides the hclk.
+ */
+
+static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk_ops clk_h_ops = {
+	.get_rate	= s3c2443_hclkdiv_getrate,
+};
+
+/* pclk divider
+ *
+ * divides the hclk and provides the pclk.
+ */
+
+static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk_ops clk_p_ops = {
+	.get_rate	= s3c2443_pclkdiv_getrate,
+};
+
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -516,26 +562,15 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return clkcon0 + 1;
-}
-
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
 	struct clk *xtal_clk;
 	unsigned long xtal;
 	unsigned long pll;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
 	int ptr;
 
 	xtal_clk = clk_get(NULL, "xtal");
@@ -544,18 +579,13 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 
 	pll = get_mpll(mpllcon, xtal);
 	clk_msysclk.clk.rate = pll;
-
-	fclk = clk_get_rate(&clk_armdiv);
-	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk /= s3c2443_get_hdiv(clkdiv0);
-	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
+	clk_mpll.rate = pll;
 
 	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(pll), print_mhz(fclk),
-	       print_mhz(hclk), print_mhz(pclk));
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
+	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
+	       print_mhz(clk_get_rate(&clk_h)),
+	       print_mhz(clk_get_rate(&clk_p)));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
 		s3c_set_clksrc(&clksrc_clks[ptr], true);
@@ -568,7 +598,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 	}
 
 	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
 	       print_mhz(clk_get_rate(&clk_epll)),
 	       print_mhz(clk_get_rate(&clk_usb_bus)));
 }
@@ -611,9 +641,13 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 	nr_armdiv = nr_divs;
 	armdivmask = divmask;
 
-	/* s3c2443 parents h and p clocks from prediv */
+	/* s3c2443 parents h clock from prediv */
 	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	clk_h.ops = &clk_h_ops;
+
+	/* and p clock from h clock */
+	clk_p.parent = &clk_h;
+	clk_p.ops = &clk_p_ops;
 
 	clk_usb_bus.parent = &clk_usb_bus_host.clk;
 	clk_epll.parent = &clk_epllref.clk;

arch/arm/mach-s3c24xx/common.h

@@ -12,6 +12,12 @@
 #ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
 #define __ARCH_ARM_MACH_S3C2410_COMMON_H
 
+#ifdef CONFIG_CPU_S3C2410
 void s3c2410_restart(char mode, const char *cmd);
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+void s3c2440_restart(char mode, const char *cmd);
+#endif
 
 #endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */

arch/arm/mach-s3c24xx/dma-s3c2443.c

@@ -51,7 +51,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "xdreq1",
 		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ1),
 	},
-	[DMACH_SDI] = {
+	[DMACH_SDI] = { /* only on S3C2443 */
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
@@ -59,7 +59,7 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = {
+	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
 		.name		= "spi1",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
@@ -71,11 +71,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
 	},
-      	[DMACH_UART2] = {
+	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
 	},
-      	[DMACH_UART3] = {
+	[DMACH_UART3] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
 	},
@@ -87,11 +87,11 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
 	},
-      	[DMACH_UART2_SRC2] = {
+	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
 	},
-      	[DMACH_UART3_SRC2] = {
+	[DMACH_UART3_SRC2] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
 	},
@@ -142,6 +142,23 @@ static int __init s3c2443_dma_add(struct device *dev,
 	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
 }
 
+#ifdef CONFIG_CPU_S3C2416
+/* S3C2416 DMA contains the same selection table as the S3C2443 */
+static struct subsys_interface s3c2416_dma_interface = {
+	.name		= "s3c2416_dma",
+	.subsys		= &s3c2416_subsys,
+	.add_dev	= s3c2443_dma_add,
+};
+
+static int __init s3c2416_dma_init(void)
+{
+	return subsys_interface_register(&s3c2416_dma_interface);
+}
+
+arch_initcall(s3c2416_dma_init);
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
 static struct subsys_interface s3c2443_dma_interface = {
 	.name		= "s3c2443_dma",
 	.subsys		= &s3c2443_subsys,
@@ -154,3 +171,4 @@ static int __init s3c2443_dma_init(void)
 }
 
 arch_initcall(s3c2443_dma_init);
+#endif

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -55,6 +55,7 @@
 #include <plat/cpu.h>
 #include <plat/audio-simtec.h>
 
+#include "simtec.h"
 #include "common.h"
 
 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"

arch/arm/mach-s3c24xx/mach-bast.c

@@ -64,8 +64,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/audio-simtec.h>
 
-#include "usb-simtec.h"
-#include "nor-simtec.h"
+#include "simtec.h"
 #include "common.h"
 
 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
 
 #include <linux/mmc/host.h>
 
@@ -73,7 +74,6 @@
 #include <mach/regs-gpioj.h>
 #include <mach/fb.h>
 
-#include <mach/spi.h>
 #include <plat/usb-control.h>
 #include <mach/regs-mem.h>
 #include <mach/hardware.h>