power: supply: axp288_charger: Make charger_init_hw_regs propagate i2c errors

Make charger_init_hw_regs propagate i2c errors, instead of only warning
about them and then ignoring them.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit is contained in:
Hans de Goede 2016-12-21 15:36:46 +01:00 committed by Sebastian Reichel
parent 7ce7d89f48
commit d556f21cb0
1 changed files with 42 additions and 20 deletions

View File

@ -701,59 +701,73 @@ static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
return NOTIFY_OK;
}
static void charger_init_hw_regs(struct axp288_chrg_info *info)
static int charger_init_hw_regs(struct axp288_chrg_info *info)
{
int ret, cc, cv;
unsigned int val;
/* Program temperature thresholds */
ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_LTF_CHRG, ret);
return ret;
}
ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_HTF_CHRG, ret);
return ret;
}
/* Do not turn-off charger o/p after charge cycle ends */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL2,
CNTL2_CHG_OUT_TURNON, 1);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL2, ret);
return ret;
}
/* Enable interrupts */
ret = regmap_update_bits(info->regmap,
AXP20X_IRQ2_EN,
BAT_IRQ_CFG_BAT_MASK, 1);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_IRQ2_EN, ret);
return ret;
}
ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN,
TEMP_IRQ_CFG_MASK, 1);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_IRQ3_EN, ret);
return ret;
}
/* Setup ending condition for charging to be 10% of I(chrg) */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
CHRG_CCCV_ITERM_20P, 0);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL1, ret);
return ret;
}
/* Disable OCV-SOC curve calibration */
ret = regmap_update_bits(info->regmap,
AXP20X_CC_CTRL,
FG_CNTL_OCV_ADJ_EN, 0);
if (ret < 0)
dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CC_CTRL, ret);
return ret;
}
/* Init charging current and voltage */
info->max_cc = info->pdata->max_cc;
@ -796,15 +810,21 @@ static void charger_init_hw_regs(struct axp288_chrg_info *info)
cv = min(info->pdata->def_cv, info->max_cv);
ret = axp288_charger_set_cc(info, cc);
if (ret < 0)
dev_warn(&info->pdev->dev,
if (ret < 0) {
dev_err(&info->pdev->dev,
"error(%d) in setting CC\n", ret);
return ret;
}
ret = axp288_charger_set_cv(info, cv);
if (ret < 0)
dev_warn(&info->pdev->dev,
if (ret < 0) {
dev_err(&info->pdev->dev,
"error(%d) in setting CV\n", ret);
return ret;
}
}
return 0;
}
static int axp288_charger_probe(struct platform_device *pdev)
@ -916,7 +936,9 @@ static int axp288_charger_probe(struct platform_device *pdev)
}
}
charger_init_hw_regs(info);
ret = charger_init_hw_regs(info);
if (ret)
goto intr_reg_failed;
return 0;