ASoC: Merge branch 'for-2.6.39' into for-2.6.40

Fix trivial conflict caused by silly spelling fix patch.

Conflicts:
	sound/soc/codecs/wm8994.c
This commit is contained in:
Mark Brown 2011-04-18 18:07:43 +01:00
commit d5381e42f6
3008 changed files with 10041 additions and 9777 deletions

View File

@ -1677,7 +1677,7 @@ W: http://www.codemonkey.org.uk
D: Assorted VIA x86 support.
D: 2.5 AGPGART overhaul.
D: CPUFREQ maintenance.
D: Fedora kernel maintainence.
D: Fedora kernel maintenance.
D: Misc/Other.
S: 314 Littleton Rd, Westford, MA 01886, USA
@ -3211,7 +3211,7 @@ N: James Simmons
E: jsimmons@infradead.org
E: jsimmons@users.sf.net
D: Frame buffer device maintainer
D: input layer developement
D: input layer development
D: tty/console layer
D: various mipsel devices
S: 115 Carmel Avenue
@ -3290,7 +3290,7 @@ S: USA
N: Manfred Spraul
E: manfred@colorfullife.com
W: http://www.colorfullife.com/~manfred
D: Lots of tiny hacks. Larger improvments to SysV IPC msg,
D: Lots of tiny hacks. Larger improvements to SysV IPC msg,
D: slab, pipe, select.
S: 71701 Schwieberdingen
S: Germany

View File

@ -206,8 +206,8 @@ laptops/
- directory with laptop related info and laptop driver documentation.
ldm.txt
- a brief description of LDM (Windows Dynamic Disks).
leds-class.txt
- documents LED handling under Linux.
leds/
- directory with info about LED handling under Linux.
local_ops.txt
- semantics and behavior of local atomic operations.
lockdep-design.txt

View File

@ -29,7 +29,7 @@ Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
linux-s390@vger.kernel.org
Description: Contains the PIM/PAM/POM values, as reported by the
channel subsystem when last queried by the common I/O
layer (this implies that this attribute is not neccessarily
layer (this implies that this attribute is not necessarily
in sync with the values current in the channel subsystem).
Note: This is an I/O-subchannel specific attribute.
Users: s390-tools, HAL

View File

@ -33,5 +33,5 @@ Contact: Richard Purdie <rpurdie@rpsys.net>
Description:
Invert the LED on/off state. This parameter is specific to
gpio and backlight triggers. In case of the backlight trigger,
it is usefull when driving a LED which is intended to indicate
it is useful when driving a LED which is intended to indicate
a device in a standby like state.

View File

@ -40,7 +40,7 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile holds informations like button
press of a button. A profile holds information like button
mappings, sensitivity, the colors of the 5 leds and light
effects.
When read, these files return the respective profile. The

View File

@ -33,7 +33,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 77 bytes long.
The mouse will reject invalid data.
@ -47,7 +47,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 77 bytes in size.
This file is readonly.
@ -58,7 +58,7 @@ Date: October 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 43 bytes long.
@ -73,7 +73,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 43 bytes in size.

View File

@ -52,7 +52,7 @@ Date: January 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 23 bytes long.
The mouse will reject invalid data.
@ -66,7 +66,7 @@ Date: January 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 23 bytes in size.
This file is readonly.
@ -77,7 +77,7 @@ Date: January 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 16 bytes long.
@ -92,7 +92,7 @@ Date: January 2011
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 16 bytes in size.

View File

@ -39,7 +39,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 13 bytes long.
@ -54,7 +54,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_settings holds informations like resolution, sensitivity
profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 13 bytes in size.
@ -66,7 +66,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 19 bytes long.
The mouse will reject invalid data.
@ -80,7 +80,7 @@ Date: August 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
profile_buttons holds informations about button layout.
profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 19 bytes in size.
This file is readonly.

View File

@ -27,7 +27,7 @@ KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Some models like the W1N have a LED display that can be
used to display several informations.
used to display several items of information.
To control the LED display, use the following :
echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
where T control the 3 letters display, and DDD the 3 digits display.

View File

@ -40,7 +40,7 @@
<para>Central frequency of the channel.</para>
<para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a
<para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a
valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
the channel which is 6MHz.</para>

View File

@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
<section id="frontend_sec_tone">
<title>SEC continuous tone</title>
<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
be switched consistently to the DiSEqC commands as described in the DiSEqC
spec.</para>

View File

@ -1763,7 +1763,7 @@ as it would be on UP.
There is a furthur optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if
you hold the lock, noone can delete the object, so you don't need to
you hold the lock, no one can delete the object, so you don't need to
get and put the reference count.
</para>

View File

@ -1032,7 +1032,7 @@ and other resources, etc.
<listitem>
<para>
This is indicated by ICRC bit in the ERROR register and
means that corruption occurred during data transfer. Upto
means that corruption occurred during data transfer. Up to
ATA/ATAPI-7, the standard specifies that this bit is only
applicable to UDMA transfers but ATA/ATAPI-8 draft revision
1f says that the bit may be applicable to multiword DMA and
@ -1045,10 +1045,10 @@ and other resources, etc.
<term>ABRT error during data transfer or on completion</term>
<listitem>
<para>
Upto ATA/ATAPI-7, the standard specifies that ABRT could be
Up to ATA/ATAPI-7, the standard specifies that ABRT could be
set on ICRC errors and on cases where a device is not able
to complete a command. Combined with the fact that MWDMA
and PIO transfer errors aren't allowed to use ICRC bit upto
and PIO transfer errors aren't allowed to use ICRC bit up to
ATA/ATAPI-7, it seems to imply that ABRT bit alone could
indicate tranfer errors.
</para>
@ -1122,7 +1122,7 @@ and other resources, etc.
<para>
Depending on commands, not all STATUS/ERROR bits are
applicable. These non-applicable bits are marked with
&quot;na&quot; in the output descriptions but upto ATA/ATAPI-7
&quot;na&quot; in the output descriptions but up to ATA/ATAPI-7
no definition of &quot;na&quot; can be found. However,
ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as
follows.
@ -1507,7 +1507,7 @@ and other resources, etc.
<listitem>
<para>
CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used)
CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used)
</para>
</listitem>

View File

@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
Reed-Solomon library.
</para>
<para>
The ECC bytes must be placed immidiately after the data
The ECC bytes must be placed immediately after the data
bytes in order to make the syndrome generator work. This
is contrary to the usual layout used by software ECC. The
separation of data and out of band area is not longer
@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
holds the bad block table. Store a pointer to the pattern
in the pattern field. Further the length of the pattern has to be
stored in len and the offset in the spare area must be given
in the offs member of the nand_bbt_descr stucture. For mirrored
in the offs member of the nand_bbt_descr structure. For mirrored
bad block tables different patterns are mandatory.</para></listitem>
<listitem><para>Table creation</para>
<para>Set the option NAND_BBT_CREATE to enable the table creation
@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<listitem><para>Table version control</para>
<para>Set the option NAND_BBT_VERSION to enable the table version control.
It's highly recommended to enable this for mirrored tables with write
support. It makes sure that the risk of loosing the bad block
support. It makes sure that the risk of losing the bad block
table information is reduced to the loss of the information about the
one worn out block which should be marked bad. The version is stored in
4 consecutive bytes in the spare area of the device. The position of
@ -1060,19 +1060,19 @@ data in this page</entry>
<row>
<entry>0x3D</entry>
<entry>ECC byte 21</entry>
<entry>Error correction code byte 0 of the eigth 256 Bytes of data
<entry>Error correction code byte 0 of the eighth 256 Bytes of data
in this page</entry>
</row>
<row>
<entry>0x3E</entry>
<entry>ECC byte 22</entry>
<entry>Error correction code byte 1 of the eigth 256 Bytes of data
<entry>Error correction code byte 1 of the eighth 256 Bytes of data
in this page</entry>
</row>
<row>
<entry>0x3F</entry>
<entry>ECC byte 23</entry>
<entry>Error correction code byte 2 of the eigth 256 Bytes of data
<entry>Error correction code byte 2 of the eighth 256 Bytes of data
in this page</entry>
</row>
</tbody></tgroup></informaltable>

View File

@ -267,8 +267,8 @@
<sect1 id="machine-constraint">
<title>Constraints</title>
<para>
As well as definining the connections the machine interface
also provides constraints definining the operations that
As well as defining the connections the machine interface
also provides constraints defining the operations that
clients are allowed to perform and the parameters that may be
set. This is required since generally regulator devices will
offer more flexibility than it is safe to use on a given

View File

@ -797,7 +797,7 @@ framework to set up sysfs files for this region. Simply leave it alone.
perform some initialization. After that, your hardware
starts working and will generate an interrupt as soon
as it's finished, has some data available, or needs your
attention because an error occured.
attention because an error occurred.
</para>
<para>
<filename>/dev/uioX</filename> is a read-only file. A

View File

@ -690,7 +690,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
</para><para>
This request lets kernel drivers talk to user mode code
through filesystem operations even when they don't create
a charactor or block special device.
a character or block special device.
It's also been used to do things like ask devices what
device special file should be used.
Two pre-defined ioctls are used

View File

@ -100,7 +100,7 @@ linux-kernel@vger.kernel.org, 2002-11-20. --></para>
<para>By convention system administrators create various
character device special files with these major and minor numbers in
the <filename>/dev</filename> directory. The names recomended for the
the <filename>/dev</filename> directory. The names recommended for the
different V4L2 device types are listed in <xref linkend="devices" />.
</para>

View File

@ -1243,7 +1243,7 @@ values are:</entry>
</row><row><entry spanname="descr">Mutes the audio when
capturing. This is not done by muting audio hardware, which can still
produce a slight hiss, but in the encoder itself, guaranteeing a fixed
and reproducable audio bitstream. 0 = unmuted, 1 = muted.</entry>
and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry>
</row>
<row><entry></entry></row>
<row id="v4l2-mpeg-video-encoding">

View File

@ -90,7 +90,7 @@
processing hardware.</para>
<figure id="pipeline-scaling">
<title>Image Format Negotation on Pipelines</title>
<title>Image Format Negotiation on Pipelines</title>
<mediaobject>
<imageobject>
<imagedata fileref="pipeline.pdf" format="PS" />

View File

@ -140,7 +140,7 @@ and is not locked sets the cid to the scaled value.
<para>int v4l2_get_control(int fd, int cid) -
This function returns a value of 0 - 65535, scaled to from the actual range
of the given v4l control id. when the cid does not exist, could not be
accessed for some reason, or some error occured 0 is returned.
accessed for some reason, or some error occurred 0 is returned.
</para></listitem>
</itemizedlist>
</section>

View File

@ -133,7 +133,7 @@ different IR's. Due to that, V4L2 API now specifies a standard for mapping Media
<row><entry><constant>KEY_LEFT</constant></entry><entry>Left key</entry><entry>LEFT</entry></row>
<row><entry><constant>KEY_RIGHT</constant></entry><entry>Right key</entry><entry>RIGHT</entry></row>
<row><entry><emphasis role="bold">Miscelaneous keys</emphasis></entry></row>
<row><entry><emphasis role="bold">Miscellaneous keys</emphasis></entry></row>
<row><entry><constant>KEY_DOT</constant></entry><entry>Return a dot</entry><entry>.</entry></row>
<row><entry><constant>KEY_FN</constant></entry><entry>Select a function</entry><entry>FUNCTION</entry></row>

View File

@ -4784,7 +4784,7 @@ struct _snd_pcm_runtime {
FM registers can be directly accessed through the direct-FM API,
defined in <filename>&lt;sound/asound_fm.h&gt;</filename>. In
ALSA native mode, FM registers are accessed through
the Hardware-Dependant Device direct-FM extension API, whereas in
the Hardware-Dependent Device direct-FM extension API, whereas in
OSS compatible mode, FM registers can be accessed with the OSS
direct-FM compatible API in <filename>/dev/dmfmX</filename> device.
</para>

View File

@ -253,8 +253,8 @@ In constrast, MSI is restricted to a maximum of 32 interrupts (and
must be a power of two). In addition, the MSI interrupt vectors must
be allocated consecutively, so the system may not be able to allocate
as many vectors for MSI as it could for MSI-X. On some platforms, MSI
interrupts must all be targetted at the same set of CPUs whereas MSI-X
interrupts can all be targetted at different CPUs.
interrupts must all be targeted at the same set of CPUs whereas MSI-X
interrupts can all be targeted at different CPUs.
4.5.2 Spinlocks

View File

@ -28,7 +28,7 @@ expect these delays to be short, measurable in days, not weeks or months.
A disclosure date is negotiated by the security team working with the
bug submitter as well as vendors. However, the kernel security team
holds the final say when setting a disclosure date. The timeframe for
disclosure is from immediate (esp. if it's already publically known)
disclosure is from immediate (esp. if it's already publicly known)
to a few weeks. As a basic default policy, we expect report date to
disclosure date to be on the order of 7 days.

View File

@ -101,7 +101,7 @@ PM support: Since Linux is used on many portable and desktop systems, your
complete overview of the power management issues related to
drivers see Documentation/power/devices.txt .
Control: In general if there is active maintainance of a driver by
Control: In general if there is active maintenance of a driver by
the author then patches will be redirected to them unless
they are totally obvious and without need of checking.
If you want to be the contact and update point for the

View File

@ -729,7 +729,7 @@ Linus Torvalds's mail on the canonical patch format:
<http://lkml.org/lkml/2005/4/7/183>
Andi Kleen, "On submitting kernel patches"
Some strategies to get difficult or controversal changes in.
Some strategies to get difficult or controversial changes in.
http://halobates.de/on-submitting-patches.pdf
--

View File

@ -36,7 +36,7 @@ Linux currently supports the following features on the IXP4xx chips:
- Timers (watchdog, OS)
The following components of the chips are not supported by Linux and
require the use of Intel's propietary CSR softare:
require the use of Intel's proprietary CSR softare:
- USB device interface
- Network interfaces (HSS, Utopia, NPEs, etc)
@ -47,7 +47,7 @@ software from:
http://developer.intel.com/design/network/products/npfamily/ixp425.htm
DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
SOFTWARE.
There are several websites that provide directions/pointers on using

View File

@ -116,7 +116,7 @@ Configuration
Allows the entire memory to be checksummed before and after the
suspend to see if there has been any corruption of the contents.
Note, the time to calculate the CRC is dependant on the CPU speed
Note, the time to calculate the CRC is dependent on the CPU speed
and the size of memory. For an 64Mbyte RAM area on an 200MHz
S3C2410, this can take approximately 4 seconds to complete.

View File

@ -5,7 +5,7 @@ Introduction
------------
This outlines the Samsung GPIO implementation and the architecture
specfic calls provided alongisde the drivers/gpio core.
specific calls provided alongisde the drivers/gpio core.
S3C24XX (Legacy)

View File

@ -497,7 +497,7 @@ The scatter gather list is in the form of an array of <page, offset, len>
entries with their corresponding dma address mappings filled in at the
appropriate time. As an optimization, contiguous physical pages can be
covered by a single entry where <page> refers to the first page and <len>
covers the range of pages (upto 16 contiguous pages could be covered this
covers the range of pages (up to 16 contiguous pages could be covered this
way). There is a helper routine (blk_rq_map_sg) which drivers can use to build
the sg list.
@ -565,7 +565,7 @@ struct request {
.
int tag; /* command tag associated with request */
void *special; /* same as before */
char *buffer; /* valid only for low memory buffers upto
char *buffer; /* valid only for low memory buffers up to
current_nr_sectors */
.
.

View File

@ -110,22 +110,22 @@ university server with various users - students, professors, system
tasks etc. The resource planning for this server could be along the
following lines:
CPU : Top cpuset
CPU : "Top cpuset"
/ \
CPUSet1 CPUSet2
| |
(Profs) (Students)
| |
(Professors) (Students)
In addition (system tasks) are attached to topcpuset (so
that they can run anywhere) with a limit of 20%
Memory : Professors (50%), students (30%), system (20%)
Memory : Professors (50%), Students (30%), system (20%)
Disk : Prof (50%), students (30%), system (20%)
Disk : Professors (50%), Students (30%), system (20%)
Network : WWW browsing (20%), Network File System (60%), others (20%)
/ \
Prof (15%) students (5%)
Professors (15%) students (5%)
Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
into NFS network class.

View File

@ -196,7 +196,7 @@ the state as 0 when a cpu if offline and 1 when its online.
#To display the current cpu state.
#cat /sys/devices/system/cpu/cpuX/online
Q: Why cant i remove CPU0 on some systems?
Q: Why can't i remove CPU0 on some systems?
A: Some architectures may have some special dependency on a certain CPU.
For e.g in IA64 platforms we have ability to sent platform interrupts to the

View File

@ -62,7 +62,7 @@ image file and then arrange all these packets back to back in to one single
file.
This file is then copied to /sys/class/firmware/dell_rbu/data.
Once this file gets to the driver, the driver extracts packet_size data from
the file and spreads it accross the physical memory in contiguous packet_sized
the file and spreads it across the physical memory in contiguous packet_sized
space.
This method makes sure that all the packets get to the driver in a single operation.

View File

@ -37,7 +37,7 @@ Algorithm
=========
dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
dispatched and substracts when completed.
dispatched and subtracts when completed.
Basically, dm-service-time selects a path having minimum service time
which is calculated by:

View File

@ -18,9 +18,9 @@ Optional properties:
- edid : verbatim EDID data block describing attached display.
Data from the detailed timing descriptor will be used to
program the display controller.
- little-endian: availiable on big endian systems, to
- little-endian: available on big endian systems, to
set different foreign endian.
- big-endian: availiable on little endian systems, to
- big-endian: available on little endian systems, to
set different foreign endian.
Example for MPC5200:

View File

@ -15,7 +15,7 @@ Optional properties:
- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
(R/B#). For multi-chip devices, "n" GPIO definitions are required
according to the number of chips.
- chip-delay : chip dependent delay for transfering data from array to
- chip-delay : chip dependent delay for transferring data from array to
read registers (tR). Required if property "gpios" is not used
(R/B# pins not connected).

View File

@ -39,7 +39,7 @@ Optional properties:
- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
For futher information, please have a look to the SJA1000 data sheet.
For further information, please have a look to the SJA1000 data sheet.
Examples:

View File

@ -199,7 +199,7 @@ EXAMPLE 4
EXAMPLE 5
/*
* Definition of an error interrupt (interupt type 1).
* Definition of an error interrupt (interrupt type 1).
* SoC interrupt number is 16 and the specific error
* interrupt bit in the error interrupt summary register
* is 23.

View File

@ -138,7 +138,7 @@ and properties to be present. This will be described in detail in
section III, but, for example, the kernel does not require you to
create a node for every PCI device in the system. It is a requirement
to have a node for PCI host bridges in order to provide interrupt
routing informations and memory/IO ranges, among others. It is also
routing information and memory/IO ranges, among others. It is also
recommended to define nodes for on chip devices and other buses that
don't specifically fit in an existing OF specification. This creates a
great flexibility in the way the kernel can then probe those and match
@ -385,7 +385,7 @@ struct boot_param_header {
among others, by kexec. If you are on an SMP system, this value
should match the content of the "reg" property of the CPU node in
the device-tree corresponding to the CPU calling the kernel entry
point (see further chapters for more informations on the required
point (see further chapters for more information on the required
device-tree contents)
- size_dt_strings
@ -553,7 +553,7 @@ looks like in practice.
This tree is almost a minimal tree. It pretty much contains the
minimal set of required nodes and properties to boot a linux kernel;
that is, some basic model informations at the root, the CPUs, and the
that is, some basic model information at the root, the CPUs, and the
physical memory layout. It also includes misc information passed
through /chosen, like in this example, the platform type (mandatory)
and the kernel command line arguments (optional).

View File

@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged
in the device).
If you want to enable debug output, you have to load the driver manually and
from withing the dvb-kernel cvs repository.
from within the dvb-kernel cvs repository.
first have a look, which debug level are available:

View File

@ -47,7 +47,7 @@ so on.
* CI modules that are supported
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The CI module support is largely dependant upon the firmware on the cards
The CI module support is largely dependent upon the firmware on the cards
Some cards do support almost all of the available CI modules. There is
nothing much that can be done in order to make additional CI modules
working with these cards.

View File

@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb
5. The dvb_net device doesn't give me any packets at all
Run tcpdump on the dvb0_0 interface. This sets the interface
into promiscous mode so it accepts any packets from the PID
into promiscuous mode so it accepts any packets from the PID
you have configured with the dvbnet utility. Check if there
are any packets with the IP addr and MAC addr you have
configured with ifconfig.

View File

@ -1,7 +1,7 @@
The DVB subsystem currently registers to the sysfs subsystem using the
"class_simple" interface.
This means that only the basic informations like module loading parameters
This means that only the basic information like module loading parameters
are presented through sysfs. Other things that might be interesting are
currently *not* available.

View File

@ -311,7 +311,7 @@ Total Correctable Errors count attribute file:
'ce_noinfo_count'
This attribute file displays the number of CEs that
have occurred wherewith no informations as to which DIMM slot
have occurred wherewith no information as to which DIMM slot
is having errors. Memory is handicapped, but operational,
yet no information is available to indicate which slot
the failing memory is in. This count field should be also
@ -741,7 +741,7 @@ were done at i7core_edac driver. This chapter will cover those differences
As EDAC API maps the minimum unity is csrows, the driver sequencially
maps channel/dimm into different csrows.
For example, suposing the following layout:
For example, supposing the following layout:
Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400

View File

@ -84,7 +84,7 @@ struct eisa_driver {
id_table : an array of NULL terminated EISA id strings,
followed by an empty string. Each string can
optionally be paired with a driver-dependant value
optionally be paired with a driver-dependent value
(driver_data).
driver : a generic driver, such as described in

View File

@ -204,7 +204,7 @@ Notes:
supported_output_devices
This read-only file contains a full ',' seperated list containing all
This read-only file contains a full ',' separated list containing all
output devices that could be available on your platform. It is likely
that not all of those have a connector on your hardware but it should
provide a good starting point to figure out which of those names match
@ -225,7 +225,7 @@ Notes:
This can happen for example if only one (the other) iga is used.
Writing to these files allows adjusting the output devices during
runtime. One can add new devices, remove existing ones or switch
between igas. Essentially you can write a ',' seperated list of device
between igas. Essentially you can write a ',' separated list of device
names (or a single one) in the same format as the output to those
files. You can add a '+' or '-' as a prefix allowing simple addition
and removal of devices. So a prefix '+' adds the devices from your list

View File

@ -309,7 +309,7 @@ ioctlfd field set to the descriptor obtained from the open call.
AUTOFS_DEV_IOCTL_TIMEOUT_CMD
----------------------------
Set the expire timeout for mounts withing an autofs mount point.
Set the expire timeout for mounts within an autofs mount point.
The call requires an initialized struct autofs_dev_ioctl with the
ioctlfd field set to the descriptor obtained from the open call.

View File

@ -95,7 +95,7 @@ restraints as possible on how an index is structured and where it is placed in
the tree. The netfs can even mix indices and data files at the same level, but
it's not recommended.
Each index entry consists of a key of indeterminate length plus some auxilliary
Each index entry consists of a key of indeterminate length plus some auxiliary
data, also of indeterminate length.
There are some limits on indices:
@ -203,23 +203,23 @@ This has the following fields:
If the function is absent, a file size of 0 is assumed.
(6) A function to retrieve auxilliary data from the netfs [optional].
(6) A function to retrieve auxiliary data from the netfs [optional].
This function will be called with the netfs data that was passed to the
cookie acquisition function and the maximum length of auxilliary data that
it may provide. It should write the auxilliary data into the given buffer
cookie acquisition function and the maximum length of auxiliary data that
it may provide. It should write the auxiliary data into the given buffer
and return the quantity it wrote.
If this function is absent, the auxilliary data length will be set to 0.
If this function is absent, the auxiliary data length will be set to 0.
The length of the auxilliary data buffer may be dependent on the key
The length of the auxiliary data buffer may be dependent on the key
length. A netfs mustn't rely on being able to provide more than 400 bytes
for both.
(7) A function to check the auxilliary data [optional].
(7) A function to check the auxiliary data [optional].
This function will be called to check that a match found in the cache for
this object is valid. For instance with AFS it could check the auxilliary
this object is valid. For instance with AFS it could check the auxiliary
data against the data version number returned by the server to determine
whether the index entry in a cache is still valid.
@ -232,7 +232,7 @@ This has the following fields:
(*) FSCACHE_CHECKAUX_NEEDS_UPDATE - the entry requires update
(*) FSCACHE_CHECKAUX_OBSOLETE - the entry should be deleted
This function can also be used to extract data from the auxilliary data in
This function can also be used to extract data from the auxiliary data in
the cache and copy it into the netfs's structures.
(8) A pair of functions to manage contexts for the completion callback

View File

@ -409,7 +409,7 @@ As a consequence of this, default_groups cannot be removed directly via
rmdir(2). They also are not considered when rmdir(2) on the parent
group is checking for children.
[Dependant Subsystems]
[Dependent Subsystems]
Sometimes other drivers depend on particular configfs items. For
example, ocfs2 mounts depend on a heartbeat region item. If that

View File

@ -97,7 +97,7 @@ Note: More extensive information for getting started with ext4 can be
* Inode allocation using large virtual block groups via flex_bg
* delayed allocation
* large block (up to pagesize) support
* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force
* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force
the ordering)
[1] Filesystems with a block size of 1k may see a limit imposed by the
@ -106,7 +106,7 @@ directory hash tree having a maximum depth of two.
2.2 Candidate features for future inclusion
* Online defrag (patches available but not well tested)
* reduced mke2fs time via lazy itable initialization in conjuction with
* reduced mke2fs time via lazy itable initialization in conjunction with
the uninit_bg feature (capability to do this is available in e2fsprogs
but a kernel thread to do lazy zeroing of unused inode table blocks
after filesystem is first mounted is required for safety)

View File

@ -62,7 +62,7 @@ be fixed.
The REMOVE uevent is generated at the end of an unsuccessful mount
or at the end of a umount of the filesystem. All REMOVE uevents will
have been preceeded by at least an ADD uevent for the same fileystem,
have been preceded by at least an ADD uevent for the same fileystem,
and unlike the other uevents is generated automatically by the kernel's
kobject subsystem.

View File

@ -11,7 +11,7 @@ their I/O so file system consistency is maintained. One of the nifty
features of GFS is perfect consistency -- changes made to the file system
on one machine show up immediately on all other machines in the cluster.
GFS uses interchangable inter-node locking mechanisms, the currently
GFS uses interchangeable inter-node locking mechanisms, the currently
supported mechanisms are:
lock_nolock -- allows gfs to be used as a local file system

View File

@ -350,7 +350,7 @@ Note the "Should sync?" parameter "nosync" means that the two mirrors are
already in sync which will be the case on a clean shutdown of Windows. If the
mirrors are not clean, you can specify the "sync" option instead of "nosync"
and the Device-Mapper driver will then copy the entirety of the "Source Device"
to the "Target Device" or if you specified multipled target devices to all of
to the "Target Device" or if you specified multiple target devices to all of
them.
Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1),

View File

@ -80,7 +80,7 @@ user_xattr (*) Enables Extended User Attributes.
nouser_xattr Disables Extended User Attributes.
acl Enables POSIX Access Control Lists support.
noacl (*) Disables POSIX Access Control Lists support.
resv_level=2 (*) Set how agressive allocation reservations will be.
resv_level=2 (*) Set how aggressive allocation reservations will be.
Valid values are between 0 (reservations off) to 8
(maximum space for reservations).
dir_resv_level= (*) By default, directory reservations will scale with file

View File

@ -42,7 +42,7 @@ Path walking overview
A name string specifies a start (root directory, cwd, fd-relative) and a
sequence of elements (directory entry names), which together refer to a path in
the namespace. A path is represented as a (dentry, vfsmount) tuple. The name
elements are sub-strings, seperated by '/'.
elements are sub-strings, separated by '/'.
Name lookups will want to find a particular path that a name string refers to
(usually the final element, or parent of final element). This is done by taking
@ -354,7 +354,7 @@ vfstest 24185492 4945 708725(2.9%) 1076136(4.4%) 0 2651
What this shows is that failed rcu-walk lookups, ie. ones that are restarted
entirely with ref-walk, are quite rare. Even the "vfstest" case which
specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise
specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to exercise
such races is not showing a huge amount of restarts.
Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where

View File

@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command
so one can extend protocol as needed without breaking backward compatibility as long
as old commands are supported. All string lengths include tail 0 byte.
All commans are transfered over the network in big-endian. CPU endianess is used at the end peers.
All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
@cmd - command number, which specifies command to be processed. Following
commands are used currently:

View File

@ -543,7 +543,7 @@ just those considered 'most important'. The new vectors are:
their statistics are used by kernel developers and interested users to
determine the occurrence of interrupts of the given type.
The above IRQ vectors are displayed only when relevent. For example,
The above IRQ vectors are displayed only when relevant. For example,
the threshold vector does not exist on x86_64 platforms. Others are
suppressed when the system is a uniprocessor. As of this writing, only
i386 and x86_64 platforms support the new IRQ vector displays.
@ -1202,7 +1202,7 @@ The columns are:
W = can do write operations
U = can do unblank
flags E = it is enabled
C = it is prefered console
C = it is preferred console
B = it is primary boot console
p = it is used for printk buffer
b = it is not a TTY but a Braille device
@ -1331,7 +1331,7 @@ NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
Documentation/feature-removal-schedule.txt.
Caveat: when a parent task is selected, the oom killer will sacrifice any first
generation children with seperate address spaces instead, if possible. This
generation children with separate address spaces instead, if possible. This
avoids servers and important system daemons from being killed and loses the
minimal amount of work.

View File

@ -219,7 +219,7 @@ or if it is stored out of line (in which case the value field stores a
reference to where the actual value is stored). This allows large values
to be stored out of line improving scanning and lookup performance and it
also allows values to be de-duplicated, the value being stored once, and
all other occurences holding an out of line reference to that value.
all other occurrences holding an out of line reference to that value.
The xattr lists are packed into compressed 8K metadata blocks.
To reduce overhead in inodes, rather than storing the on-disk

View File

@ -62,7 +62,7 @@ values of the same type.
Mixing types, expressing multiple lines of data, and doing fancy
formatting of data is heavily frowned upon. Doing these things may get
you publically humiliated and your code rewritten without notice.
you publicly humiliated and your code rewritten without notice.
An attribute definition is simply:

View File

@ -97,7 +97,7 @@ functions:
The passed struct file_system_type describes your filesystem. When a
request is made to mount a filesystem onto a directory in your namespace,
the VFS will call the appropriate mount() method for the specific
filesystem. New vfsmount refering to the tree returned by ->mount()
filesystem. New vfsmount referring to the tree returned by ->mount()
will be attached to the mountpoint, so that when pathname resolution
reaches the mountpoint it will jump into the root of that vfsmount.

View File

@ -42,7 +42,7 @@ the aggregation of all the previous changes currently held only in the log.
This relogging technique also allows objects to be moved forward in the log so
that an object being relogged does not prevent the tail of the log from ever
moving forward. This can be seen in the table above by the changing
(increasing) LSN of each subsquent transaction - the LSN is effectively a
(increasing) LSN of each subsequent transaction - the LSN is effectively a
direct encoding of the location in the log of the transaction.
This relogging is also used to implement long-running, multiple-commit
@ -338,7 +338,7 @@ the same time another transaction modifies the item and inserts the log item
into the new CIL, then checkpoint transaction commit code cannot use log items
to store the list of log vectors that need to be written into the transaction.
Hence log vectors need to be able to be chained together to allow them to be
detatched from the log items. That is, when the CIL is flushed the memory
detached from the log items. That is, when the CIL is flushed the memory
buffer and log vector attached to each log item needs to be attached to the
checkpoint context so that the log item can be released. In diagrammatic form,
the CIL would look like this before the flush:
@ -577,7 +577,7 @@ only becomes unpinned when all the transactions complete and there are no
pending transactions. Thus the pinning and unpinning of a log item is symmetric
as there is a 1:1 relationship with transaction commit and log item completion.
For delayed logging, however, we have an assymetric transaction commit to
For delayed logging, however, we have an asymmetric transaction commit to
completion relationship. Every time an object is relogged in the CIL it goes
through the commit process without a corresponding completion being registered.
That is, we now have a many-to-one relationship between transaction commit and
@ -780,7 +780,7 @@ With delayed logging, there are new steps inserted into the life cycle:
From this, it can be seen that the only life cycle differences between the two
logging methods are in the middle of the life cycle - they still have the same
beginning and end and execution constraints. The only differences are in the
commiting of the log items to the log itself and the completion processing.
committing of the log items to the log itself and the completion processing.
Hence delayed logging should not introduce any constraints on log item
behaviour, allocation or freeing that don't already exist.

View File

@ -78,7 +78,7 @@ motherboards (most modern Abit motherboards).
The first and second revision of the uGuru chip in reality is a Winbond
W83L950D in disguise (despite Abit claiming it is "a new microprocessor
designed by the ABIT Engineers"). Unfortunatly this doesn't help since the
designed by the ABIT Engineers"). Unfortunately this doesn't help since the
W83L950D is a generic microcontroller with a custom Abit application running
on it.

View File

@ -5,9 +5,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or
datasheet from Abit. The data I have got on uGuru have I assembled through
my weak knowledge in "backwards engineering".
And just for the record, you may have noticed uGuru isn't a chip developed by
Abit, as they claim it to be. It's realy just an microprocessor (uC) created by
Abit, as they claim it to be. It's really just an microprocessor (uC) created by
Winbond (W83L950D). And no, reading the manual for this specific uC or
mailing Windbond for help won't give any usefull data about uGuru, as it is
mailing Windbond for help won't give any useful data about uGuru, as it is
the program inside the uC that is responding to calls.
Olle Sandberg <ollebull@gmail.com>, 2005-05-25
@ -41,7 +41,7 @@ later on attached again data-port will hold 0x08, more about this later.
After wider testing of the Linux kernel driver some variants of the uGuru have
turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also
have to test CMD for two different values. On these uGuru's DATA will initally
have to test CMD for two different values. On these uGuru's DATA will initially
hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read
first!
@ -308,5 +308,5 @@ the voltage / clock programming out, I tried reading and only reading banks
resulted in a _permanent_ reprogramming of the voltages, luckily I had the
sensors part configured so that it would shutdown my system on any out of spec
voltages which proprably safed my computer (after a reboot I managed to
immediatly enter the bios and reload the defaults). This probably means that
immediately enter the bios and reload the defaults). This probably means that
the read/write cycle for the non sensor part is different from the sensor part.

View File

@ -47,7 +47,7 @@ This driver supports the hardware monitoring features of the third revision of
the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.
The 3rd revision of the uGuru chip in reality is a Winbond W83L951G.
Unfortunatly this doesn't help since the W83L951G is a generic microcontroller
Unfortunately this doesn't help since the W83L951G is a generic microcontroller
with a custom Abit application running on it.
Despite Abit not releasing any information regarding the uGuru revision 3,

View File

@ -150,11 +150,11 @@ The following attributes are supported. Limits are read-write; all other
attributes are read-only.
inX_input Measured voltage. From READ_VIN or READ_VOUT register.
inX_min Minumum Voltage.
inX_min Minimum Voltage.
From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
inX_max Maximum voltage.
From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
inX_lcrit Critical minumum Voltage.
inX_lcrit Critical minimum Voltage.
From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
inX_crit Critical maximum voltage.
From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
@ -169,7 +169,7 @@ inX_label "vin", "vcap", or "voutY"
currX_input Measured current. From READ_IIN or READ_IOUT register.
currX_max Maximum current.
From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
currX_lcrit Critical minumum output current.
currX_lcrit Critical minimum output current.
From IOUT_UC_FAULT_LIMIT register.
currX_crit Critical maximum current.
From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.

View File

@ -579,7 +579,7 @@ channel should not be trusted.
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
0: no fault occured
0: no fault occurred
1: fault condition
RO

View File

@ -403,7 +403,7 @@ found out the following values do work as a form of coarse pwm:
0x80 - seems to turn fans off after some time(1-2 minutes)... might be
some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan
old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan
that was dropped at the BIOS)
0x81 - off
0x82 - slightly "on-ner" than off, but my fans do not get to move. I can

View File

@ -93,7 +93,7 @@ The sysfs interface to the beep bitmask has migrated from the original legacy
method of a single sysfs beep_mask file to a newer method using multiple
*_beep files as described in .../Documentation/hwmon/sysfs-interface.
A similar change has occured for the bitmap corresponding to the alarms. The
A similar change has occurred for the bitmap corresponding to the alarms. The
original legacy method used a single sysfs alarms file containing a bitmap
of triggered alarms. The newer method uses multiple sysfs *_alarm files
(again following the pattern described in sysfs-interface).

View File

@ -4,7 +4,7 @@ Author: Jean Delvare <khali@linux-fr.org>
This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This might be
prefered on embedded systems where wasting memory for the clean but heavy
preferred on embedded systems where wasting memory for the clean but heavy
parport handling is not an option. The drawback is a reduced portability
and the impossibility to daisy-chain other parallel port devices.

View File

@ -35,7 +35,7 @@ or perhaps this...
(kernel versions later than 2.4.18 may fill in the "Unknown"s)
If you cant see it please look on quirk_sis_96x_smbus
If you can't see it please look on quirk_sis_96x_smbus
(drivers/pci/quirks.c) (also if southbridge detection fails)
I suspect that this driver could be made to work for the following SiS

View File

@ -13,7 +13,7 @@ Currently supported devices are:
* TAOS TSL2550 EVM
For addtional information on TAOS products, please see
For additional information on TAOS products, please see
http://www.taosinc.com/

View File

@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
BoxHill Corporation
Loan of initial FibreChannel disk array used for development work.
European Comission
European Commission
Funding the work done by the University of Helsinki
SysKonnect

View File

@ -177,7 +177,7 @@ static int scan_rom(char *path, char *file)
/*
* It's OK if the ROM is unreadable. Maybe there
* is no ROM, or some other error ocurred. The
* is no ROM, or some other error occurred. The
* important thing is that no MCA happened.
*/
if (rc > 0)

View File

@ -272,7 +272,7 @@ if you want to use gamecon.c.
Also, the connection is a bit more complex. You'll need a bunch of diodes,
and one pullup resistor. First, you connect the Directions and the button
the same as for db9, however with the diodes inbetween.
the same as for db9, however with the diodes between.
Diodes
(pin 2) -----|<|----> Up

View File

@ -46,7 +46,7 @@ c) Falling edge on channel A, channel B in high state
d) Falling edge on channel B, channel A in low state
Parking position. If the encoder enters this state, a full transition
should have happend, unless it flipped back on half the way. The
should have happened, unless it flipped back on half the way. The
'armed' state tells us about that.
2. Platform requirements

View File

@ -77,7 +77,7 @@ pulse length:
24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits
(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
(Warning, pulses on ACK are inverted by transistor, irq is raised up on sync
to bin change or octal value to bin change).
Binary data representations:

View File

@ -53,5 +53,5 @@ implementation in an architecture: lockdep will detect that and will
turn itself off. I.e. the lock validator will still be reliable. There
should be no crashes due to irq-tracing bugs. (except if the assembly
changes break other code by modifying conditions or registers that
shouldnt be)
shouldn't be)

View File

@ -240,7 +240,7 @@ Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
messages between their transport encoding described in the CAPI 2.0 standard
and their _cmsg structure representation. Note that capi_cmsg2message() does
not know or check the size of its destination buffer. The caller must make
sure it is big enough to accomodate the resulting CAPI message.
sure it is big enough to accommodate the resulting CAPI message.
5. Lower Layer Interface Functions

View File

@ -26,11 +26,11 @@ Additional options to the assembler (for built-in and modules).
AFLAGS_MODULE
--------------------------------------------------
Addtional module specific options to use for $(AS).
Additional module specific options to use for $(AS).
AFLAGS_KERNEL
--------------------------------------------------
Addtional options for $(AS) when used for assembler
Additional options for $(AS) when used for assembler
code for code that is compiled as built-in.
KCFLAGS
@ -39,12 +39,12 @@ Additional options to the C compiler (for built-in and modules).
CFLAGS_KERNEL
--------------------------------------------------
Addtional options for $(CC) when used to compile
Additional options for $(CC) when used to compile
code that is compiled as built-in.
CFLAGS_MODULE
--------------------------------------------------
Addtional module specific options to use for $(CC).
Additional module specific options to use for $(CC).
LDFLAGS_MODULE
--------------------------------------------------

View File

@ -699,7 +699,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
ekgdboc= [X86,KGDB] Allow early kernel console debugging
ekgdboc=kbd
This is desgined to be used in conjunction with
This is designed to be used in conjunction with
the boot argument: earlyprintk=vga
edd= [EDD]
@ -1832,15 +1832,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
perfmon on Intel CPUs instead of the
CPU specific event set.
oops=panic Always panic on oopses. Default is to just kill the process,
but there is a small probability of deadlocking the machine.
oops=panic Always panic on oopses. Default is to just kill the
process, but there is a small probability of
deadlocking the machine.
This will also cause panics on machine check exceptions.
Useful together with panic=30 to trigger a reboot.
OSS [HW,OSS]
See Documentation/sound/oss/oss-parameters.txt
panic= [KNL] Kernel behaviour on panic
panic= [KNL] Kernel behaviour on panic: delay <timeout>
seconds before rebooting
Format: <timeout>
parkbd.port= [HW] Parallel port number the keyboard adapter is
@ -2343,6 +2345,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
@ -2475,8 +2478,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
topology informations if the hardware supports these.
The scheduler will make use of these informations and
topology information if the hardware supports this.
The scheduler will make use of this information and
e.g. base its process migration decisions on it.
Default is on.
@ -2529,8 +2532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
reported either.
unknown_nmi_panic
[X86]
Set unknown_nmi_panic=1 early on boot.
[X86] Cause panic on unknown NMI.
usbcore.autosuspend=
[USB] The autosuspend time delay (in seconds) used

View File

@ -11,6 +11,7 @@ with the difference that the orphan objects are not freed but only
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
Usage
-----
@ -178,5 +179,4 @@ block doesn't need to be freed (some cases in the init_call functions),
the pointer is calculated by other methods than the usual container_of
macro or the pointer is stored in a location not scanned by kmemleak.
Page allocations and ioremap are not tracked. Only the ARM and x86
architectures are currently supported.
Page allocations and ioremap are not tracked.

View File

@ -23,7 +23,7 @@ The mmu code attempts to satisfy the following requirements:
and framebuffer-based displays
- footprint: keep the amount of pinned kernel memory low (most memory
should be shrinkable)
- reliablity: avoid multipage or GFP_ATOMIC allocations
- reliability: avoid multipage or GFP_ATOMIC allocations
Acronyms
========

View File

@ -136,7 +136,7 @@ Patched instructions
====================
The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
respectively on 32 bit systems with an added offset of 4 to accomodate for big
respectively on 32 bit systems with an added offset of 4 to accommodate for big
endianness.
The following is a list of mapping the Linux kernel performs when running as

View File

@ -81,7 +81,7 @@ Mode 0: Single Timeout. This is a one-shot software timeout that counts down
when the gate is high (always true for timers 0 and 1). When the count
reaches zero, the output goes high.
Mode 1: Triggered One-shot. The output is intially set high. When the gate
Mode 1: Triggered One-shot. The output is initially set high. When the gate
line is set high, a countdown is initiated (which does not stop if the gate is
lowered), during which the output is set low. When the count reaches zero,
the output goes high.

View File

@ -61,7 +61,7 @@ Usage
Hotkeys are also reported as input keys (like keyboards) you can check
which key are supported using "xev" under X11.
You can get informations on the version of your DSDT table by reading the
You can get information on the version of your DSDT table by reading the
/sys/devices/platform/asus-laptop/infos entry. If you have a question or a
bug report to do, please include the output of this entry.
@ -178,7 +178,7 @@ LED display
-----------
Some models like the W1N have a LED display that can be used to display
several informations.
several items of information.
LED display works for the following models:
W1000N

View File

@ -0,0 +1,8 @@
leds-class.txt
- documents LED handling under Linux.
leds-lp3944.txt
- notes on how to use the leds-lp3944 driver.
leds-lp5521.txt
- notes on how to use the leds-lp5521 driver.
leds-lp5523.txt
- notes on how to use the leds-lp5523 driver.

View File

@ -95,4 +95,3 @@ There are a number of cases where a trigger might only be mappable to a
particular LED (ACPI?). The addition of triggers provided by the LED driver
should cover this option and be possible to add without breaking the
current interface.

View File

@ -194,7 +194,7 @@ each pad.
Links are represented by a struct media_link instance, defined in
include/media/media-entity.h. Each entity stores all links originating at or
targetting any of its pads in a links array. A given link is thus stored
targeting any of its pads in a links array. A given link is thus stored
twice, once in the source entity and once in the target entity. The array is
pre-allocated and grows dynamically as needed.
@ -348,6 +348,6 @@ a streaming entity. Links that can be modified while streaming must be marked
with the MEDIA_LNK_FL_DYNAMIC flag.
If other operations need to be disallowed on streaming entities (such as
changing entities configuration parameters) drivers can explictly check the
changing entities configuration parameters) drivers can explicitly check the
media_entity stream_count field to find out if an entity is streaming. This
operation must be done with the media_device graph_mutex held.

View File

@ -39,13 +39,13 @@ Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
Interface and Linux Device Driver" Application Note.
FILES, CONFIGS AND COMPATABILITY
FILES, CONFIGS AND COMPATIBILITY
--------------------------------
Two files are introduced:
a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
containes : struct _auide_hwif
contains : struct _auide_hwif
timing parameters for PIO mode 0/1/2/3/4
timing parameters for MWDMA 0/1/2

View File

@ -5,7 +5,7 @@ Supported chips:
* IDT ICS932S401
Prefix: 'ics932s401'
Addresses scanned: I2C 0x69
Datasheet: Publically available at the IDT website
Datasheet: Publicly available at the IDT website
Author: Darrick J. Wong

View File

@ -45,7 +45,7 @@ debugging messages on, that must be done by modified the source code.
Variable MTU size:
The driver can handle a MTU size upto either 4500 or 18000 depending upon
The driver can handle a MTU size up to either 4500 or 18000 depending upon
ring speed. The driver also changes the size of the receive buffers as part
of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring

View File

@ -256,7 +256,7 @@ You can set the debug level via:
Where $VALUE would be a number in the case of this sysfs entry. The
input to sysfs files does not have to be a number. For example, the
firmware loader used by hotplug utilizes sysfs entries for transfering
firmware loader used by hotplug utilizes sysfs entries for transferring
the firmware image from user space into the driver.
The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries

View File

@ -72,7 +72,7 @@ folder:
# fragmentation gw_sel_class vis_mode
There is a special folder for debugging informations:
There is a special folder for debugging information:
# ls /sys/kernel/debug/batman_adv/bat0/
# gateways socket transtable_global vis_data

View File

@ -368,7 +368,7 @@ fail_over_mac
gratuitous ARP is lost, communication may be
disrupted.
When this policy is used in conjuction with the mii
When this policy is used in conjunction with the mii
monitor, devices which assert link up prior to being
able to actually transmit and receive are particularly
susceptible to loss of the gratuitous ARP, and an

View File

@ -136,7 +136,7 @@ The CAIF Protocol implementation contains:
- CFMUX CAIF Mux layer. Handles multiplexing between multiple
physical bearers and multiple channels such as VEI, Datagram, etc.
The MUX keeps track of the existing CAIF Channels and
Physical Instances and selects the apropriate instance based
Physical Instances and selects the appropriate instance based
on Channel-Id and Physical-ID.
- CFFRML CAIF Framing layer. Handles Framing i.e. Frame length

View File

@ -150,7 +150,7 @@ static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
{
/* If xfer is true then you should assert the SPI_INT to indicate to
* the master that you are ready to recieve the data from the master
* the master that you are ready to receive the data from the master
* SPI. If xfer is false then you should de-assert SPI_INT to indicate
* that the transfer is done.
*/

View File

@ -240,7 +240,7 @@ solution for a couple of reasons:
the user application using the common CAN filter mechanisms. Inside
this filter definition the (interested) type of errors may be
selected. The reception of error frames is disabled by default.
The format of the CAN error frame is briefly decribed in the Linux
The format of the CAN error frame is briefly described in the Linux
header file "include/linux/can/error.h".
4. How to use Socket CAN

View File

@ -9,7 +9,7 @@ The Linux-ZigBee project goal is to provide complete implementation
of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
of protocols for organizing Low-Rate Wireless Personal Area Networks.
Currently only IEEE 802.15.4 layer is implemented. We have choosen
Currently only IEEE 802.15.4 layer is implemented. We have chosen
to use plain Berkeley socket API, the generic Linux networking stack
to transfer IEEE 802.15.4 messages and a special protocol over genetlink
for configuration/management

Some files were not shown because too many files have changed in this diff Show More