diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt new file mode 100644 index 000000000000..e551814629b4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-keys.txt @@ -0,0 +1,49 @@ +ADC attached resistor ladder buttons +------------------------------------ + +Required properties: + - compatible: "adc-keys" + - io-channels: Phandle to an ADC channel + - io-channel-names = "buttons"; + - keyup-threshold-microvolt: Voltage at which all the keys are considered up. + +Optional properties: + - poll-interval: Poll interval time in milliseconds + - autorepeat: Boolean, Enable auto repeat feature of Linux input + subsystem. + +Each button (key) is represented as a sub-node of "adc-keys": + +Required subnode-properties: + - label: Descriptive name of the key. + - linux,code: Keycode to emit. + - press-threshold-microvolt: Voltage ADC input when this key is pressed. + +Example: + +#include + + adc-keys { + compatible = "adc-keys"; + io-channels = <&lradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <2000000>; + + button-up { + label = "Volume Up"; + linux,code = ; + press-threshold-microvolt = <1500000>; + }; + + button-down { + label = "Volume Down"; + linux,code = ; + press-threshold-microvolt = <1000000>; + }; + + button-enter { + label = "Enter"; + linux,code = ; + press-threshold-microvolt = <500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt new file mode 100644 index 000000000000..14a77fb96cf0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt @@ -0,0 +1,23 @@ +* GPIO Decoder DT bindings + +Required Properties: +- compatible: should be "gpio-decoder" +- gpios: a spec of gpios (at least two) to be decoded to a number with + first entry representing the MSB. + +Optional Properties: +- decoder-max-value: Maximum possible value that can be reported by + the gpios. +- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y). + Defaults to 0 (ABS_X). + +Example: + gpio-decoder0 { + compatible = "gpio-decoder"; + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, + <&pca9536 2 GPIO_ACTIVE_HIGH>, + <&pca9536 1 GPIO_ACTIVE_HIGH>, + <&pca9536 0 GPIO_ACTIVE_HIGH>; + linux,axis = <0>; /* ABS_X */ + decoder-max-value = <9>; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 95d0fb11a787..4d9a3717eaaf 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -34,11 +34,10 @@ Example nodes: gpio_keys_polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; - button@21 { + + button21 { label = "GPIO Key UP"; linux,code = <103>; gpios = <&gpio1 0 1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index f99528da1b1d..6db22103e2dd 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -19,6 +19,7 @@ Required properties: or: "edt,edt-ft5306" or: "edt,edt-ft5406" or: "edt,edt-ft5506" + or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) - interrupt-parent: a phandle pointing to the interrupt controller @@ -43,6 +44,13 @@ Optional properties: - offset: allows setting the edge compensation in the range from 0 to 31. + - touchscreen-size-x : See touchscreen.txt + - touchscreen-size-y : See touchscreen.txt + - touchscreen-fuzz-x : See touchscreen.txt + - touchscreen-fuzz-y : See touchscreen.txt + - touchscreen-inverted-x : See touchscreen.txt + - touchscreen-inverted-y : See touchscreen.txt + - touchscreen-swapped-x-y : See touchscreen.txt Example: polytouch: edt-ft5x06@38 { diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt new file mode 100644 index 000000000000..5a19f4c3e9d7 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt @@ -0,0 +1,27 @@ +* Elan eKTF2127 I2C touchscreen controller + +Required properties: + - compatible : "elan,ektf2127" + - reg : I2C slave address of the chip (0x40) + - interrupt-parent : a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts : interrupt specification for the ektf2127 interrupt + - power-gpios : GPIO specification for the pin connected to the + ektf2127's wake input. This needs to be driven high + to take ektf2127 out of it's low power state + +For additional optional properties see: touchscreen.txt + +Example: + +i2c@00000000 { + ektf2127: touchscreen@15 { + compatible = "elan,ektf2127"; + reg = <0x15>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING> + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt b/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt deleted file mode 100644 index 777521da3da5..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt +++ /dev/null @@ -1,35 +0,0 @@ -* FocalTech FT6236 I2C touchscreen controller - -Required properties: - - compatible : "focaltech,ft6236" - - reg : I2C slave address of the chip (0x38) - - interrupt-parent : a phandle pointing to the interrupt controller - serving the interrupt for this chip - - interrupts : interrupt specification for the touch controller - interrupt - - reset-gpios : GPIO specification for the RSTN input - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - -Optional properties: - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - -Example: - - ft6x06@38 { - compatible = "focaltech,ft6236"; - reg = <0x38>; - interrupt-parent = <&gpio>; - interrupts = <23 2>; - touchscreen-size-x = <320>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt index e30e0b93f2b3..3e5b9793341f 100644 --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -1,13 +1,24 @@ -Texas Instruments TPS65218 power button +Texas Instruments TPS65217 and TPS65218 power button + +This module is part of the TPS65217/TPS65218. For more details about the whole +TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt. This driver provides a simple power button event via an Interrupt. Required properties: -- compatible: should be "ti,tps65218-pwrbutton" +- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton" + +Required properties for TPS65218: - interrupts: should be one of the following - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218 -Example: +Examples: + +&tps { + tps65217-pwrbutton { + compatible = "ti,tps65217-pwrbutton"; + }; +}; &tps { power-button { diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index c0b1f5bafae4..0a2ca9be00e6 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -217,9 +218,22 @@ static struct platform_device jornada_ssp_device = { .id = -1, }; +static struct resource jornada_kbd_resources[] = { + DEFINE_RES_IRQ(IRQ_GPIO0), +}; + static struct platform_device jornada_kbd_device = { .name = "jornada720_kbd", .id = -1, + .num_resources = ARRAY_SIZE(jornada_kbd_resources), + .resource = jornada_kbd_resources, +}; + +static struct gpiod_lookup_table jornada_ts_gpiod_table = { + .dev_id = "jornada_ts", + .table = { + GPIO_LOOKUP("gpio", 9, "penup", GPIO_ACTIVE_HIGH), + }, }; static struct platform_device jornada_ts_device = { @@ -250,6 +264,8 @@ static int __init jornada720_init(void) GPSR = GPIO_GPIO20; /* restart gpio20 */ udelay(20); /* give it some time to restart */ + gpiod_add_lookup_table(&jornada_ts_gpiod_table); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 509608c95994..cbd75cf44739 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,21 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_ADC + tristate "ADC Ladder Buttons" + depends on IIO + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to an ADC using a resistor ladder. + + Say Y here if your device has such buttons connected to an ADC. Your + board-specific setup logic must also provide a configuration data + for mapping voltages to buttons. + + To compile this driver as a module, choose M here: the + module will be called adc_keys. + config KEYBOARD_ADP5520 tristate "Keypad Support for ADP5520 PMIC" depends on PMIC_ADP5520 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 1d416ddf84e4..d9f4cfcf3410 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,6 +4,7 @@ # Each configuration option enables a list of files. +obj-$(CONFIG_KEYBOARD_ADC) += adc-keys.o obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c new file mode 100644 index 000000000000..f8cf2ccacefd --- /dev/null +++ b/drivers/input/keyboard/adc-keys.c @@ -0,0 +1,210 @@ +/* + * Input driver for resistor ladder connected on ADC + * + * Copyright (c) 2016 Alexandre Belloni + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct adc_keys_button { + u32 voltage; + u32 keycode; +}; + +struct adc_keys_state { + struct iio_channel *channel; + u32 num_keys; + u32 last_key; + u32 keyup_voltage; + const struct adc_keys_button *map; +}; + +static void adc_keys_poll(struct input_polled_dev *dev) +{ + struct adc_keys_state *st = dev->private; + int i, value, ret; + u32 diff, closest = 0xffffffff; + int keycode = 0; + + ret = iio_read_channel_processed(st->channel, &value); + if (unlikely(ret < 0)) { + /* Forcibly release key if any was pressed */ + value = st->keyup_voltage; + } else { + for (i = 0; i < st->num_keys; i++) { + diff = abs(st->map[i].voltage - value); + if (diff < closest) { + closest = diff; + keycode = st->map[i].keycode; + } + } + } + + if (abs(st->keyup_voltage - value) < closest) + keycode = 0; + + if (st->last_key && st->last_key != keycode) + input_report_key(dev->input, st->last_key, 0); + + if (keycode) + input_report_key(dev->input, keycode, 1); + + input_sync(dev->input); + st->last_key = keycode; +} + +static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) +{ + struct adc_keys_button *map; + struct fwnode_handle *child; + int i; + + st->num_keys = device_get_child_node_count(dev); + if (st->num_keys == 0) { + dev_err(dev, "keymap is missing\n"); + return -EINVAL; + } + + map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + + i = 0; + device_for_each_child_node(dev, child) { + if (fwnode_property_read_u32(child, "press-threshold-microvolt", + &map[i].voltage)) { + dev_err(dev, "Key with invalid or missing voltage\n"); + fwnode_handle_put(child); + return -EINVAL; + } + map[i].voltage /= 1000; + + if (fwnode_property_read_u32(child, "linux,code", + &map[i].keycode)) { + dev_err(dev, "Key with invalid or missing linux,code\n"); + fwnode_handle_put(child); + return -EINVAL; + } + + i++; + } + + st->map = map; + return 0; +} + +static int adc_keys_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_keys_state *st; + struct input_polled_dev *poll_dev; + struct input_dev *input; + enum iio_chan_type type; + int i, value; + int error; + + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); + if (!st) + return -ENOMEM; + + st->channel = devm_iio_channel_get(dev, "buttons"); + if (IS_ERR(st->channel)) + return PTR_ERR(st->channel); + + if (!st->channel->indio_dev) + return -ENXIO; + + error = iio_get_channel_type(st->channel, &type); + if (error < 0) + return error; + + if (type != IIO_VOLTAGE) { + dev_err(dev, "Incompatible channel type %d\n", type); + return -EINVAL; + } + + if (device_property_read_u32(dev, "keyup-threshold-microvolt", + &st->keyup_voltage)) { + dev_err(dev, "Invalid or missing keyup voltage\n"); + return -EINVAL; + } + st->keyup_voltage /= 1000; + + error = adc_keys_load_keymap(dev, st); + if (error) + return error; + + platform_set_drvdata(pdev, st); + + poll_dev = devm_input_allocate_polled_device(dev); + if (!poll_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + if (!device_property_read_u32(dev, "poll-interval", &value)) + poll_dev->poll_interval = value; + + poll_dev->poll = adc_keys_poll; + poll_dev->private = st; + + input = poll_dev->input; + + input->name = pdev->name; + input->phys = "adc-keys/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < st->num_keys; i++) + __set_bit(st->map[i].keycode, input->keybit); + + if (device_property_read_bool(dev, "autorepeat")) + __set_bit(EV_REP, input->evbit); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "Unable to register input device: %d\n", error); + return error; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id adc_keys_of_match[] = { + { .compatible = "adc-keys", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_keys_of_match); +#endif + +static struct platform_driver __refdata adc_keys_driver = { + .driver = { + .name = "adc_keys", + .of_match_table = of_match_ptr(adc_keys_of_match), + }, + .probe = adc_keys_probe, +}; +module_platform_driver(adc_keys_driver); + +MODULE_AUTHOR("Alexandre Belloni "); +MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index 421d9c55b0e8..1277c39f9482 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -25,8 +25,6 @@ #include #include -#include -#include MODULE_AUTHOR("Kristoffer Ericson "); MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver"); @@ -66,10 +64,8 @@ static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id) jornada_ssp_start(); if (jornada_ssp_inout(GETSCANKEYCODE) != TXDUMMY) { - printk(KERN_DEBUG - "jornada720_kbd: " - "GetKeycode command failed with ETIMEDOUT, " - "flushed bus\n"); + dev_dbg(&pdev->dev, + "GetKeycode command failed with ETIMEDOUT, flushed bus\n"); } else { /* How many keycodes are waiting for us? */ count = jornada_ssp_byte(TXDUMMY); @@ -97,14 +93,16 @@ static int jornada720_kbd_probe(struct platform_device *pdev) { struct jornadakbd *jornadakbd; struct input_dev *input_dev; - int i, err; + int i, err, irq; - jornadakbd = kzalloc(sizeof(struct jornadakbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!jornadakbd || !input_dev) { - err = -ENOMEM; - goto fail1; - } + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq < 0 ? irq : -EINVAL; + + jornadakbd = devm_kzalloc(&pdev->dev, sizeof(*jornadakbd), GFP_KERNEL); + input_dev = devm_input_allocate_device(&pdev->dev); + if (!jornadakbd || !input_dev) + return -ENOMEM; platform_set_drvdata(pdev, jornadakbd); @@ -127,40 +125,16 @@ static int jornada720_kbd_probe(struct platform_device *pdev) input_set_capability(input_dev, EV_MSC, MSC_SCAN); - err = request_irq(IRQ_GPIO0, - jornada720_kbd_interrupt, - IRQF_TRIGGER_FALLING, - "jornadakbd", pdev); + err = devm_request_irq(&pdev->dev, irq, jornada720_kbd_interrupt, + IRQF_TRIGGER_FALLING, "jornadakbd", pdev); if (err) { - printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n"); - goto fail1; + dev_err(&pdev->dev, "unable to grab IRQ%d: %d\n", irq, err); + return err; } - err = input_register_device(jornadakbd->input); - if (err) - goto fail2; - - return 0; - - fail2: /* IRQ, DEVICE, MEMORY */ - free_irq(IRQ_GPIO0, pdev); - fail1: /* DEVICE, MEMORY */ - input_free_device(input_dev); - kfree(jornadakbd); - return err; + return input_register_device(jornadakbd->input); }; -static int jornada720_kbd_remove(struct platform_device *pdev) -{ - struct jornadakbd *jornadakbd = platform_get_drvdata(pdev); - - free_irq(IRQ_GPIO0, pdev); - input_unregister_device(jornadakbd->input); - kfree(jornadakbd); - - return 0; -} - /* work with hotplug and coldplug */ MODULE_ALIAS("platform:jornada720_kbd"); @@ -169,6 +143,5 @@ static struct platform_driver jornada720_kbd_driver = { .name = "jornada720_kbd", }, .probe = jornada720_kbd_probe, - .remove = jornada720_kbd_remove, }; module_platform_driver(jornada720_kbd_driver); diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c index 24a9f599082f..7544888c4749 100644 --- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -168,7 +168,6 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) error = input_register_device(input); if (error < 0) { dev_err(&pdev->dev, "failed to register input device\n"); - input_free_device(input); return error; } diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index efb0ca871327..7ffb614ce566 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -292,6 +292,18 @@ config INPUT_GPIO_TILT_POLLED To compile this driver as a module, choose M here: the module will be called gpio_tilt_polled. +config INPUT_GPIO_DECODER + tristate "Polled GPIO Decoder Input driver" + depends on GPIOLIB || COMPILE_TEST + select INPUT_POLLDEV + help + Say Y here if you want driver to read status of multiple GPIO + lines and report the encoded value as an absolute integer to + input subsystem. + + To compile this driver as a module, choose M here: the module + will be called gpio_decoder. + config INPUT_IXP4XX_BEEPER tristate "IXP4XX Beeper support" depends on ARCH_IXP4XX @@ -454,10 +466,10 @@ config INPUT_RETU_PWRBUTTON config INPUT_TPS65218_PWRBUTTON tristate "TPS65218 Power button driver" - depends on MFD_TPS65218 + depends on (MFD_TPS65217 || MFD_TPS65218) help Say Y here if you want to enable power buttong reporting for - the TPS65218 Power Management IC device. + TPS65217 and TPS65218 Power Management IC devices. To compile this driver as a module, choose M here. The module will be called tps65218-pwrbutton. diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 6a1e5e20fc1c..0b6d025f0487 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o +obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o diff --git a/drivers/input/misc/gpio_decoder.c b/drivers/input/misc/gpio_decoder.c new file mode 100644 index 000000000000..ca7e0bacb2d8 --- /dev/null +++ b/drivers/input/misc/gpio_decoder.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * A generic driver to read multiple gpio lines and translate the + * encoded numeric value into an input event. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct gpio_decoder { + struct input_polled_dev *poll_dev; + struct gpio_descs *input_gpios; + struct device *dev; + u32 axis; + u32 last_stable; +}; + +static int gpio_decoder_get_gpios_state(struct gpio_decoder *decoder) +{ + struct gpio_descs *gpios = decoder->input_gpios; + unsigned int ret = 0; + int i, val; + + for (i = 0; i < gpios->ndescs; i++) { + val = gpiod_get_value_cansleep(gpios->desc[i]); + if (val < 0) { + dev_err(decoder->dev, + "Error reading gpio %d: %d\n", + desc_to_gpio(gpios->desc[i]), val); + return val; + } + + val = !!val; + ret = (ret << 1) | val; + } + + return ret; +} + +static void gpio_decoder_poll_gpios(struct input_polled_dev *poll_dev) +{ + struct gpio_decoder *decoder = poll_dev->private; + int state; + + state = gpio_decoder_get_gpios_state(decoder); + if (state >= 0 && state != decoder->last_stable) { + input_report_abs(poll_dev->input, decoder->axis, state); + input_sync(poll_dev->input); + decoder->last_stable = state; + } +} + +static int gpio_decoder_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_decoder *decoder; + struct input_polled_dev *poll_dev; + u32 max; + int err; + + decoder = devm_kzalloc(dev, sizeof(struct gpio_decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + device_property_read_u32(dev, "linux,axis", &decoder->axis); + decoder->input_gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN); + if (IS_ERR(decoder->input_gpios)) { + dev_err(dev, "unable to acquire input gpios\n"); + return PTR_ERR(decoder->input_gpios); + } + if (decoder->input_gpios->ndescs < 2) { + dev_err(dev, "not enough gpios found\n"); + return -EINVAL; + } + + if (device_property_read_u32(dev, "decoder-max-value", &max)) + max = (1U << decoder->input_gpios->ndescs) - 1; + + decoder->dev = dev; + poll_dev = devm_input_allocate_polled_device(decoder->dev); + if (!poll_dev) + return -ENOMEM; + + poll_dev->private = decoder; + poll_dev->poll = gpio_decoder_poll_gpios; + decoder->poll_dev = poll_dev; + + poll_dev->input->name = pdev->name; + poll_dev->input->id.bustype = BUS_HOST; + input_set_abs_params(poll_dev->input, decoder->axis, 0, max, 0, 0); + + err = input_register_polled_device(poll_dev); + if (err) { + dev_err(dev, "failed to register polled device\n"); + return err; + } + platform_set_drvdata(pdev, decoder); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id gpio_decoder_of_match[] = { + { .compatible = "gpio-decoder", }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_decoder_of_match); +#endif + +static struct platform_driver gpio_decoder_driver = { + .probe = gpio_decoder_probe, + .driver = { + .name = "gpio-decoder", + .of_match_table = of_match_ptr(gpio_decoder_of_match), + } +}; +module_platform_driver(gpio_decoder_driver); + +MODULE_DESCRIPTION("GPIO decoder input driver"); +MODULE_AUTHOR("Vignesh R "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c index 29ddeb7be84b..46b0f48fbf49 100644 --- a/drivers/input/misc/max77693-haptic.c +++ b/drivers/input/misc/max77693-haptic.c @@ -3,7 +3,7 @@ * * Copyright (C) 2014,2015 Samsung Electronics * Jaewon Kim - * Krzysztof Kozlowski + * Krzysztof Kozlowski * * This program is not provided / owned by Maxim Integrated Products. * @@ -426,7 +426,7 @@ static struct platform_driver max77693_haptic_driver = { module_platform_driver(max77693_haptic_driver); MODULE_AUTHOR("Jaewon Kim "); -MODULE_AUTHOR("Krzysztof Kozlowski "); +MODULE_AUTHOR("Krzysztof Kozlowski "); MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver"); MODULE_ALIAS("platform:max77693-haptic"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c index a39b62651a4b..3273217ce80c 100644 --- a/drivers/input/misc/tps65218-pwrbutton.c +++ b/drivers/input/misc/tps65218-pwrbutton.c @@ -1,8 +1,9 @@ /* - * Texas Instruments' TPS65218 Power Button Input Driver + * Texas Instruments' TPS65217 and TPS65218 Power Button Input Driver * * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ * Author: Felipe Balbi + * Author: Marcin Niestroj * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,31 +19,61 @@ #include #include #include +#include #include #include #include #include +#include #include -struct tps65218_pwrbutton { - struct device *dev; - struct tps65218 *tps; - struct input_dev *idev; +struct tps6521x_data { + unsigned int reg_status; + unsigned int pb_mask; + const char *name; }; -static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr) +static const struct tps6521x_data tps65217_data = { + .reg_status = TPS65217_REG_STATUS, + .pb_mask = TPS65217_STATUS_PB, + .name = "tps65217_pwrbutton", +}; + +static const struct tps6521x_data tps65218_data = { + .reg_status = TPS65218_REG_STATUS, + .pb_mask = TPS65218_STATUS_PB_STATE, + .name = "tps65218_pwrbutton", +}; + +struct tps6521x_pwrbutton { + struct device *dev; + struct regmap *regmap; + struct input_dev *idev; + const struct tps6521x_data *data; + char phys[32]; +}; + +static const struct of_device_id of_tps6521x_pb_match[] = { + { .compatible = "ti,tps65217-pwrbutton", .data = &tps65217_data }, + { .compatible = "ti,tps65218-pwrbutton", .data = &tps65218_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_tps6521x_pb_match); + +static irqreturn_t tps6521x_pb_irq(int irq, void *_pwr) { - struct tps65218_pwrbutton *pwr = _pwr; + struct tps6521x_pwrbutton *pwr = _pwr; + const struct tps6521x_data *tps_data = pwr->data; unsigned int reg; int error; - error = tps65218_reg_read(pwr->tps, TPS65218_REG_STATUS, ®); + error = regmap_read(pwr->regmap, tps_data->reg_status, ®); if (error) { dev_err(pwr->dev, "can't read register: %d\n", error); goto out; } - if (reg & TPS65218_STATUS_PB_STATE) { + if (reg & tps_data->pb_mask) { input_report_key(pwr->idev, KEY_POWER, 1); pm_wakeup_event(pwr->dev, 0); } else { @@ -55,42 +86,55 @@ out: return IRQ_HANDLED; } -static int tps65218_pwron_probe(struct platform_device *pdev) +static int tps6521x_pb_probe(struct platform_device *pdev) { - struct tps65218 *tps = dev_get_drvdata(pdev->dev.parent); struct device *dev = &pdev->dev; - struct tps65218_pwrbutton *pwr; + struct tps6521x_pwrbutton *pwr; struct input_dev *idev; + const struct of_device_id *match; int error; int irq; + match = of_match_node(of_tps6521x_pb_match, pdev->dev.of_node); + if (!match) + return -ENXIO; + pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL); if (!pwr) return -ENOMEM; + pwr->data = match->data; + idev = devm_input_allocate_device(dev); if (!idev) return -ENOMEM; - idev->name = "tps65218_pwrbutton"; - idev->phys = "tps65218_pwrbutton/input0"; + idev->name = pwr->data->name; + snprintf(pwr->phys, sizeof(pwr->phys), "%s/input0", + pwr->data->name); + idev->phys = pwr->phys; idev->dev.parent = dev; idev->id.bustype = BUS_I2C; input_set_capability(idev, EV_KEY, KEY_POWER); - pwr->tps = tps; + pwr->regmap = dev_get_regmap(pdev->dev.parent, NULL); pwr->dev = dev; pwr->idev = idev; platform_set_drvdata(pdev, pwr); device_init_wakeup(dev, true); irq = platform_get_irq(pdev, 0); - error = devm_request_threaded_irq(dev, irq, NULL, tps65218_pwr_irq, + if (irq < 0) { + dev_err(dev, "No IRQ resource!\n"); + return -EINVAL; + } + + error = devm_request_threaded_irq(dev, irq, NULL, tps6521x_pb_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "tps65218-pwrbutton", pwr); + pwr->data->name, pwr); if (error) { dev_err(dev, "failed to request IRQ #%d: %d\n", irq, error); @@ -106,21 +150,15 @@ static int tps65218_pwron_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id of_tps65218_pwr_match[] = { - { .compatible = "ti,tps65218-pwrbutton" }, - { }, -}; -MODULE_DEVICE_TABLE(of, of_tps65218_pwr_match); - -static struct platform_driver tps65218_pwron_driver = { - .probe = tps65218_pwron_probe, +static struct platform_driver tps6521x_pb_driver = { + .probe = tps6521x_pb_probe, .driver = { - .name = "tps65218_pwrbutton", - .of_match_table = of_tps65218_pwr_match, + .name = "tps6521x_pwrbutton", + .of_match_table = of_tps6521x_pb_match, }, }; -module_platform_driver(tps65218_pwron_driver); +module_platform_driver(tps6521x_pb_driver); -MODULE_DESCRIPTION("TPS65218 Power Button"); +MODULE_DESCRIPTION("TPS6521X Power Button"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Felipe Balbi "); diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index cb6aecbc1dc2..e23b2495d52e 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -222,11 +222,13 @@ static int elan_smbus_get_checksum(struct i2c_client *client, static int elan_smbus_get_max(struct i2c_client *client, unsigned int *max_x, unsigned int *max_y) { + int ret; int error; u8 val[3]; - error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); - if (error) { + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; dev_err(&client->dev, "failed to get dimensions: %d\n", error); return error; } @@ -240,12 +242,13 @@ static int elan_smbus_get_max(struct i2c_client *client, static int elan_smbus_get_resolution(struct i2c_client *client, u8 *hw_res_x, u8 *hw_res_y) { + int ret; int error; u8 val[3]; - error = i2c_smbus_read_block_data(client, - ETP_SMBUS_RESOLUTION_CMD, val); - if (error) { + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RESOLUTION_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; dev_err(&client->dev, "failed to get resolution: %d\n", error); return error; } @@ -260,12 +263,13 @@ static int elan_smbus_get_num_traces(struct i2c_client *client, unsigned int *x_traces, unsigned int *y_traces) { + int ret; int error; u8 val[3]; - error = i2c_smbus_read_block_data(client, - ETP_SMBUS_XY_TRACENUM_CMD, val); - if (error) { + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_XY_TRACENUM_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; dev_err(&client->dev, "failed to get trace info: %d\n", error); return error; } diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index c8c6a8cc329d..54eceb30ede5 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -390,7 +390,8 @@ static int focaltech_read_size(struct psmouse *psmouse) return 0; } -void focaltech_set_resolution(struct psmouse *psmouse, unsigned int resolution) +static void focaltech_set_resolution(struct psmouse *psmouse, + unsigned int resolution) { /* not supported yet */ } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5784e20542a4..fb4b185dea96 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1916,7 +1916,7 @@ static int __init psmouse_init(void) synaptics_module_init(); hgpk_module_init(); - kpsmoused_wq = create_singlethread_workqueue("kpsmoused"); + kpsmoused_wq = alloc_ordered_workqueue("kpsmoused", 0); if (!kpsmoused_wq) { pr_err("failed to create kpsmoused workqueue\n"); return -ENOMEM; diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 9c927d35c1f5..d189843f3727 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -71,10 +71,7 @@ static void serport_serio_close(struct serio *serio) spin_lock_irqsave(&serport->lock, flags); clear_bit(SERPORT_ACTIVE, &serport->flags); - set_bit(SERPORT_DEAD, &serport->flags); spin_unlock_irqrestore(&serport->lock, flags); - - wake_up_interruptible(&serport->wait); } /* @@ -248,6 +245,19 @@ static long serport_ldisc_compat_ioctl(struct tty_struct *tty, } #endif +static int serport_ldisc_hangup(struct tty_struct *tty) +{ + struct serport *serport = (struct serport *) tty->disc_data; + unsigned long flags; + + spin_lock_irqsave(&serport->lock, flags); + set_bit(SERPORT_DEAD, &serport->flags); + spin_unlock_irqrestore(&serport->lock, flags); + + wake_up_interruptible(&serport->wait); + return 0; +} + static void serport_ldisc_write_wakeup(struct tty_struct * tty) { struct serport *serport = (struct serport *) tty->disc_data; @@ -274,6 +284,7 @@ static struct tty_ldisc_ops serport_ldisc = { .compat_ioctl = serport_ldisc_compat_ioctl, #endif .receive_buf = serport_ldisc_receive, + .hangup = serport_ldisc_hangup, .write_wakeup = serport_ldisc_write_wakeup }; diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c index 949dacc78664..47de5a81172f 100644 --- a/drivers/input/tablet/pegasus_notetaker.c +++ b/drivers/input/tablet/pegasus_notetaker.c @@ -40,6 +40,7 @@ #include #include #include +#include /* USB HID defines */ #define USB_REQ_GET_REPORT 0x01 diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2fb1f430a431..507981356921 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -305,19 +305,6 @@ config TOUCHSCREEN_EGALAX_SERIAL To compile this driver as a module, choose M here: the module will be called egalax_ts_serial. -config TOUCHSCREEN_FT6236 - tristate "FT6236 I2C touchscreen" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - help - Say Y here to enable support for the I2C connected FT6x06 and - FT6x36 family of capacitive touchscreen drivers. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called ft6236. - config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO @@ -397,6 +384,18 @@ config TOUCHSCREEN_GUNZE To compile this driver as a module, choose M here: the module will be called gunze. +config TOUCHSCREEN_EKTF2127 + tristate "Elan eKTF2127 I2C touchscreen" + depends on I2C + help + Say Y here if you have an Elan eKTF2127 touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ektf2127. + config TOUCHSCREEN_ELAN tristate "Elan eKTH I2C touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index b4373d6be402..81b86451782d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -32,11 +32,11 @@ obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o +obj-$(CONFIG_TOUCHSCREEN_EKTF2127) += ektf2127.o obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o -obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 703e295a37ed..28466e358fee 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1063,9 +1063,15 @@ static const struct edt_i2c_chip_data edt_ft5506_data = { .max_support_points = 10, }; +static const struct edt_i2c_chip_data edt_ft6236_data = { + .max_support_points = 2, +}; + static const struct i2c_device_id edt_ft5x06_ts_id[] = { { .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data }, { .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data }, + /* Note no edt- prefix for compatibility with the ft6236.c driver */ + { .name = "ft6236", .driver_data = (long)&edt_ft6236_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id); @@ -1076,6 +1082,8 @@ static const struct of_device_id edt_ft5x06_of_match[] = { { .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data }, { .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data }, { .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data }, + /* Note focaltech vendor prefix for compatibility with ft6236.c */ + { .compatible = "focaltech,ft6236", .data = &edt_ft6236_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match); diff --git a/drivers/input/touchscreen/ektf2127.c b/drivers/input/touchscreen/ektf2127.c new file mode 100644 index 000000000000..0ed34ff787ce --- /dev/null +++ b/drivers/input/touchscreen/ektf2127.c @@ -0,0 +1,336 @@ +/* + * Driver for ELAN eKTF2127 i2c touchscreen controller + * + * For this driver the layout of the Chipone icn8318 i2c + * touchscreencontroller is used. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: + * Michel Verlaan + * Siebren Vroegindeweij + * + * Original chipone_icn8318 driver: + * Hans de Goede + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Packet header defines (first byte of data send / received) */ +#define EKTF2127_NOISE 0x40 +#define EKTF2127_RESPONSE 0x52 +#define EKTF2127_REQUEST 0x53 +#define EKTF2127_HELLO 0x55 +#define EKTF2127_REPORT 0x5d +#define EKTF2127_CALIB_DONE 0x66 + +/* Register defines (second byte of data send / received) */ +#define EKTF2127_ENV_NOISY 0x41 +#define EKTF2127_HEIGHT 0x60 +#define EKTF2127_WIDTH 0x63 + +/* 2 bytes header + 5 * 3 bytes coordinates + 3 bytes pressure info + footer */ +#define EKTF2127_TOUCH_REPORT_SIZE 21 +#define EKTF2127_MAX_TOUCHES 5 + +struct ektf2127_ts { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *power_gpios; + struct touchscreen_properties prop; +}; + +static void ektf2127_parse_coordinates(const u8* buf, unsigned int touch_count, + struct input_mt_pos *touches) +{ + int index = 0; + int i; + + for (i = 0; i < touch_count; i++) { + index = 2 + i * 3; + + touches[i].x = (buf[index] & 0x0f); + touches[i].x <<= 8; + touches[i].x |= buf[index + 2]; + + touches[i].y = (buf[index] & 0xf0); + touches[i].y <<= 4; + touches[i].y |= buf[index + 1]; + } +} + +static void ektf2127_report_event(struct ektf2127_ts *ts, const u8 *buf) +{ + struct input_mt_pos touches[EKTF2127_MAX_TOUCHES]; + int slots[EKTF2127_MAX_TOUCHES]; + unsigned int touch_count, i; + + touch_count = buf[1] & 0x07; + if (touch_count > EKTF2127_MAX_TOUCHES) { + dev_err(&ts->client->dev, + "Too many touches %d > %d\n", + touch_count, EKTF2127_MAX_TOUCHES); + touch_count = EKTF2127_MAX_TOUCHES; + } + + ektf2127_parse_coordinates(buf, touch_count, touches); + input_mt_assign_slots(ts->input, slots, touches, + touch_count, 0); + + for (i = 0; i < touch_count; i++) { + input_mt_slot(ts->input, slots[i]); + input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); + touchscreen_report_pos(ts->input, &ts->prop, + touches[i].x, touches[i].y, true); + } + + input_mt_sync_frame(ts->input); + input_sync(ts->input); +} + +static irqreturn_t ektf2127_irq(int irq, void *dev_id) +{ + struct ektf2127_ts *ts = dev_id; + struct device *dev = &ts->client->dev; + char buf[EKTF2127_TOUCH_REPORT_SIZE]; + int ret; + + ret = i2c_master_recv(ts->client, buf, EKTF2127_TOUCH_REPORT_SIZE); + if (ret != EKTF2127_TOUCH_REPORT_SIZE) { + dev_err(dev, "Error reading touch data: %d\n", ret); + goto out; + } + + switch (buf[0]) { + case EKTF2127_REPORT: + ektf2127_report_event(ts, buf); + break; + + case EKTF2127_NOISE: + if (buf[1] == EKTF2127_ENV_NOISY) + dev_dbg(dev, "Environment is electrically noisy\n"); + break; + + case EKTF2127_HELLO: + case EKTF2127_CALIB_DONE: + break; + + default: + dev_err(dev, "Unexpected packet header byte %#02x\n", buf[0]); + break; + } + +out: + return IRQ_HANDLED; +} + +static int ektf2127_start(struct input_dev *dev) +{ + struct ektf2127_ts *ts = input_get_drvdata(dev); + + enable_irq(ts->client->irq); + gpiod_set_value_cansleep(ts->power_gpios, 1); + + return 0; +} + +static void ektf2127_stop(struct input_dev *dev) +{ + struct ektf2127_ts *ts = input_get_drvdata(dev); + + disable_irq(ts->client->irq); + gpiod_set_value_cansleep(ts->power_gpios, 0); +} + +static int __maybe_unused ektf2127_suspend(struct device *dev) +{ + struct ektf2127_ts *ts = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&ts->input->mutex); + if (ts->input->users) + ektf2127_stop(ts->input); + mutex_unlock(&ts->input->mutex); + + return 0; +} + +static int __maybe_unused ektf2127_resume(struct device *dev) +{ + struct ektf2127_ts *ts = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&ts->input->mutex); + if (ts->input->users) + ektf2127_start(ts->input); + mutex_unlock(&ts->input->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ektf2127_pm_ops, ektf2127_suspend, + ektf2127_resume); + +static int ektf2127_query_dimension(struct i2c_client *client, bool width) +{ + struct device *dev = &client->dev; + const char *what = width ? "width" : "height"; + u8 what_code = width ? EKTF2127_WIDTH : EKTF2127_HEIGHT; + u8 buf[4]; + int ret; + int error; + + /* Request dimension */ + buf[0] = EKTF2127_REQUEST; + buf[1] = width ? EKTF2127_WIDTH : EKTF2127_HEIGHT; + buf[2] = 0x00; + buf[3] = 0x00; + ret = i2c_master_send(client, buf, sizeof(buf)); + if (ret != sizeof(buf)) { + error = ret < 0 ? ret : -EIO; + dev_err(dev, "Failed to request %s: %d\n", what, error); + return error; + } + + msleep(20); + + /* Read response */ + ret = i2c_master_recv(client, buf, sizeof(buf)); + if (ret != sizeof(buf)) { + error = ret < 0 ? ret : -EIO; + dev_err(dev, "Failed to receive %s data: %d\n", what, error); + return error; + } + + if (buf[0] != EKTF2127_RESPONSE || buf[1] != what_code) { + dev_err(dev, "Unexpected %s data: %#02x %#02x\n", + what, buf[0], buf[1]); + return -EIO; + } + + return (((buf[3] & 0xf0) << 4) | buf[2]) - 1; +} + +static int ektf2127_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ektf2127_ts *ts; + struct input_dev *input; + u8 buf[4]; + int max_x, max_y; + int error; + + if (!client->irq) { + dev_err(dev, "Error no irq specified\n"); + return -EINVAL; + } + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + /* This requests the gpio *and* turns on the touchscreen controller */ + ts->power_gpios = devm_gpiod_get(dev, "power", GPIOD_OUT_HIGH); + if (IS_ERR(ts->power_gpios)) { + error = PTR_ERR(ts->power_gpios); + if (error != -EPROBE_DEFER) + dev_err(dev, "Error getting power gpio: %d\n", error); + return error; + } + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->open = ektf2127_start; + input->close = ektf2127_stop; + + ts->client = client; + + /* Read hello (ignore result, depends on initial power state) */ + msleep(20); + i2c_master_recv(ts->client, buf, sizeof(buf)); + + /* Read resolution from chip */ + max_x = ektf2127_query_dimension(client, true); + if (max_x < 0) + return max_x; + + max_y = ektf2127_query_dimension(client, false); + if (max_y < 0) + return max_y; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + touchscreen_parse_properties(input, true, &ts->prop); + + error = input_mt_init_slots(input, EKTF2127_MAX_TOUCHES, + INPUT_MT_DIRECT | + INPUT_MT_DROP_UNUSED | + INPUT_MT_TRACK); + if (error) + return error; + + ts->input = input; + input_set_drvdata(input, ts); + + error = devm_request_threaded_irq(dev, client->irq, + NULL, ektf2127_irq, + IRQF_ONESHOT, client->name, ts); + if (error) { + dev_err(dev, "Error requesting irq: %d\n", error); + return error; + } + + /* Stop device till opened */ + ektf2127_stop(ts->input); + + error = input_register_device(input); + if (error) + return error; + + i2c_set_clientdata(client, ts); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ektf2127_of_match[] = { + { .compatible = "elan,ektf2127" }, + {} +}; +MODULE_DEVICE_TABLE(of, ektf2127_of_match); +#endif + +static const struct i2c_device_id ektf2127_i2c_id[] = { + { "ektf2127", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ektf2127_i2c_id); + +static struct i2c_driver ektf2127_driver = { + .driver = { + .name = "elan_ektf2127", + .pm = &ektf2127_pm_ops, + .of_match_table = of_match_ptr(ektf2127_of_match), + }, + .probe = ektf2127_probe, + .id_table = ektf2127_i2c_id, +}; +module_i2c_driver(ektf2127_driver); + +MODULE_DESCRIPTION("ELAN eKTF2127 I2C Touchscreen Driver"); +MODULE_AUTHOR("Michel Verlaan, Siebren Vroegindeweij"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index ac09855fa435..02aec284deca 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -298,7 +298,7 @@ static u16 elants_i2c_parse_version(u8 *buf) return get_unaligned_be32(buf) >> 4; } -static int elants_i2c_query_fw_id(struct elants_data *ts) +static int elants_i2c_query_hw_version(struct elants_data *ts) { struct i2c_client *client = ts->client; int error, retry_cnt; @@ -318,8 +318,13 @@ static int elants_i2c_query_fw_id(struct elants_data *ts) error, (int)sizeof(resp), resp); } - dev_err(&client->dev, - "Failed to read fw id or fw id is invalid\n"); + if (error) { + dev_err(&client->dev, + "Failed to read fw id: %d\n", error); + return error; + } + + dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version); return -EINVAL; } @@ -508,7 +513,7 @@ static int elants_i2c_fastboot(struct i2c_client *client) static int elants_i2c_initialize(struct elants_data *ts) { struct i2c_client *client = ts->client; - int error, retry_cnt; + int error, error2, retry_cnt; const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 }; const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 }; u8 buf[HEADER_SIZE]; @@ -553,18 +558,22 @@ static int elants_i2c_initialize(struct elants_data *ts) } } + /* hw version is available even if device in recovery state */ + error2 = elants_i2c_query_hw_version(ts); if (!error) - error = elants_i2c_query_fw_id(ts); + error = error2; + if (!error) error = elants_i2c_query_fw_version(ts); + if (!error) + error = elants_i2c_query_test_version(ts); + if (!error) + error = elants_i2c_query_bc_version(ts); + if (!error) + error = elants_i2c_query_ts_info(ts); - if (error) { + if (error) ts->iap_mode = ELAN_IAP_RECOVERY; - } else { - elants_i2c_query_test_version(ts); - elants_i2c_query_bc_version(ts); - elants_i2c_query_ts_info(ts); - } return 0; } diff --git a/drivers/input/touchscreen/ft6236.c b/drivers/input/touchscreen/ft6236.c deleted file mode 100644 index d240d2e212bd..000000000000 --- a/drivers/input/touchscreen/ft6236.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * FocalTech FT6236 TouchScreen driver. - * - * Copyright (c) 2010 Focal tech Ltd. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define FT6236_MAX_TOUCH_POINTS 2 - -#define FT6236_REG_TH_GROUP 0x80 -#define FT6236_REG_PERIODACTIVE 0x88 -#define FT6236_REG_LIB_VER_H 0xa1 -#define FT6236_REG_LIB_VER_L 0xa2 -#define FT6236_REG_CIPHER 0xa3 -#define FT6236_REG_FIRMID 0xa6 -#define FT6236_REG_FOCALTECH_ID 0xa8 -#define FT6236_REG_RELEASE_CODE_ID 0xaf - -#define FT6236_EVENT_PRESS_DOWN 0 -#define FT6236_EVENT_LIFT_UP 1 -#define FT6236_EVENT_CONTACT 2 -#define FT6236_EVENT_NO_EVENT 3 - -struct ft6236_data { - struct i2c_client *client; - struct input_dev *input; - struct gpio_desc *reset_gpio; - u32 max_x; - u32 max_y; - bool invert_x; - bool invert_y; - bool swap_xy; -}; - -/* - * This struct is a touchpoint as stored in hardware. Note that the id, - * as well as the event, are stored in the upper nybble of the hi byte. - */ -struct ft6236_touchpoint { - union { - u8 xhi; - u8 event; - }; - u8 xlo; - union { - u8 yhi; - u8 id; - }; - u8 ylo; - u8 weight; - u8 misc; -} __packed; - -/* This packet represents the register map as read from offset 0 */ -struct ft6236_packet { - u8 dev_mode; - u8 gest_id; - u8 touches; - struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS]; -} __packed; - -static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data) -{ - int error; - - error = i2c_smbus_read_i2c_block_data(client, reg, len, data); - if (error < 0) - return error; - - if (error != len) - return -EIO; - - return 0; -} - -static irqreturn_t ft6236_interrupt(int irq, void *dev_id) -{ - struct ft6236_data *ft6236 = dev_id; - struct device *dev = &ft6236->client->dev; - struct input_dev *input = ft6236->input; - struct ft6236_packet buf; - u8 touches; - int i, error; - - error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf); - if (error) { - dev_err(dev, "read touchdata failed %d\n", error); - return IRQ_HANDLED; - } - - touches = buf.touches & 0xf; - if (touches > FT6236_MAX_TOUCH_POINTS) { - dev_dbg(dev, - "%d touch points reported, only %d are supported\n", - touches, FT6236_MAX_TOUCH_POINTS); - touches = FT6236_MAX_TOUCH_POINTS; - } - - for (i = 0; i < touches; i++) { - struct ft6236_touchpoint *point = &buf.points[i]; - u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo; - u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo; - u8 event = point->event >> 6; - u8 id = point->id >> 4; - bool act = (event == FT6236_EVENT_PRESS_DOWN || - event == FT6236_EVENT_CONTACT); - - input_mt_slot(input, id); - input_mt_report_slot_state(input, MT_TOOL_FINGER, act); - if (!act) - continue; - - if (ft6236->invert_x) - x = ft6236->max_x - x; - - if (ft6236->invert_y) - y = ft6236->max_y - y; - - if (ft6236->swap_xy) { - input_report_abs(input, ABS_MT_POSITION_X, y); - input_report_abs(input, ABS_MT_POSITION_Y, x); - } else { - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); - } - } - - input_mt_sync_frame(input); - input_sync(input); - - return IRQ_HANDLED; -} - -static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg) -{ - struct i2c_client *client = ft6236->client; - u8 val = 0; - int error; - - error = ft6236_read(client, reg, 1, &val); - if (error) - dev_dbg(&client->dev, - "error reading register 0x%02x: %d\n", reg, error); - - return val; -} - -static void ft6236_debug_info(struct ft6236_data *ft6236) -{ - struct device *dev = &ft6236->client->dev; - - dev_dbg(dev, "Touch threshold is %d\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4); - dev_dbg(dev, "Report rate is %dHz\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10); - dev_dbg(dev, "Firmware library version 0x%02x%02x\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H), - ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L)); - dev_dbg(dev, "Firmware version 0x%02x\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID)); - dev_dbg(dev, "Chip vendor ID 0x%02x\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER)); - dev_dbg(dev, "CTPM vendor ID 0x%02x\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID)); - dev_dbg(dev, "Release code version 0x%02x\n", - ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID)); -} - -static void ft6236_reset(struct ft6236_data *ft6236) -{ - if (!ft6236->reset_gpio) - return; - - gpiod_set_value_cansleep(ft6236->reset_gpio, 1); - usleep_range(5000, 20000); - gpiod_set_value_cansleep(ft6236->reset_gpio, 0); - msleep(300); -} - -static int ft6236_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct device *dev = &client->dev; - struct ft6236_data *ft6236; - struct input_dev *input; - u32 fuzz_x = 0, fuzz_y = 0; - u8 val; - int error; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) - return -ENXIO; - - if (!client->irq) { - dev_err(dev, "irq is missing\n"); - return -EINVAL; - } - - ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL); - if (!ft6236) - return -ENOMEM; - - ft6236->client = client; - ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_LOW); - if (IS_ERR(ft6236->reset_gpio)) { - error = PTR_ERR(ft6236->reset_gpio); - if (error != -EPROBE_DEFER) - dev_err(dev, "error getting reset gpio: %d\n", error); - return error; - } - - ft6236_reset(ft6236); - - /* verify that the controller is present */ - error = ft6236_read(client, 0x00, 1, &val); - if (error) { - dev_err(dev, "failed to read from controller: %d\n", error); - return error; - } - - ft6236_debug_info(ft6236); - - input = devm_input_allocate_device(dev); - if (!input) - return -ENOMEM; - - ft6236->input = input; - input->name = client->name; - input->id.bustype = BUS_I2C; - - if (device_property_read_u32(dev, "touchscreen-size-x", - &ft6236->max_x) || - device_property_read_u32(dev, "touchscreen-size-y", - &ft6236->max_y)) { - dev_err(dev, "touchscreen-size-x and/or -y missing\n"); - return -EINVAL; - } - - device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x); - device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y); - ft6236->invert_x = device_property_read_bool(dev, - "touchscreen-inverted-x"); - ft6236->invert_y = device_property_read_bool(dev, - "touchscreen-inverted-y"); - ft6236->swap_xy = device_property_read_bool(dev, - "touchscreen-swapped-x-y"); - - if (ft6236->swap_xy) { - input_set_abs_params(input, ABS_MT_POSITION_X, 0, - ft6236->max_y, fuzz_y, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, - ft6236->max_x, fuzz_x, 0); - } else { - input_set_abs_params(input, ABS_MT_POSITION_X, 0, - ft6236->max_x, fuzz_x, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, - ft6236->max_y, fuzz_y, 0); - } - - error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS, - INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); - if (error) - return error; - - error = devm_request_threaded_irq(dev, client->irq, NULL, - ft6236_interrupt, IRQF_ONESHOT, - client->name, ft6236); - if (error) { - dev_err(dev, "request irq %d failed: %d\n", client->irq, error); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(dev, "failed to register input device: %d\n", error); - return error; - } - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id ft6236_of_match[] = { - { .compatible = "focaltech,ft6236", }, - { } -}; -MODULE_DEVICE_TABLE(of, ft6236_of_match); -#endif - -static const struct i2c_device_id ft6236_id[] = { - { "ft6236", }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ft6236_id); - -static struct i2c_driver ft6236_driver = { - .driver = { - .name = "ft6236", - .of_match_table = of_match_ptr(ft6236_of_match), - }, - .probe = ft6236_probe, - .id_table = ft6236_id, -}; -module_i2c_driver(ft6236_driver); - -MODULE_AUTHOR("Sean Cross "); -MODULE_AUTHOR("Noralf Trønnes "); -MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index ea3b6a5b83e6..729b3c89324c 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -13,6 +13,7 @@ * HP Jornada 710/720/729 Touchscreen Driver */ +#include #include #include #include @@ -20,9 +21,7 @@ #include #include -#include #include -#include MODULE_AUTHOR("Kristoffer Ericson "); MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver"); @@ -30,6 +29,7 @@ MODULE_LICENSE("GPL v2"); struct jornada_ts { struct input_dev *dev; + struct gpio_desc *gpio; int x_data[4]; /* X sample values */ int y_data[4]; /* Y sample values */ }; @@ -71,8 +71,8 @@ static irqreturn_t jornada720_ts_interrupt(int irq, void *dev_id) struct input_dev *input = jornada_ts->dev; int x, y; - /* If GPIO_GPIO9 is set to high then report pen up */ - if (GPLR & GPIO_GPIO(9)) { + /* If gpio is high then report pen up */ + if (gpiod_get_value(jornada_ts->gpio)) { input_report_key(input, BTN_TOUCH, 0); input_sync(input); } else { @@ -101,7 +101,7 @@ static int jornada720_ts_probe(struct platform_device *pdev) { struct jornada_ts *jornada_ts; struct input_dev *input_dev; - int error; + int error, irq; jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL); if (!jornada_ts) @@ -113,6 +113,14 @@ static int jornada720_ts_probe(struct platform_device *pdev) platform_set_drvdata(pdev, jornada_ts); + jornada_ts->gpio = devm_gpiod_get(&pdev->dev, "penup", GPIOD_IN); + if (IS_ERR(jornada_ts->gpio)) + return PTR_ERR(jornada_ts->gpio); + + irq = gpiod_to_irq(jornada_ts->gpio); + if (irq <= 0) + return irq < 0 ? irq : -EINVAL; + jornada_ts->dev = input_dev; input_dev->name = "HP Jornada 7xx Touchscreen"; @@ -125,8 +133,7 @@ static int jornada720_ts_probe(struct platform_device *pdev) input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); - error = devm_request_irq(&pdev->dev, IRQ_GPIO9, - jornada720_ts_interrupt, + error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt, IRQF_TRIGGER_RISING, "HP7XX Touchscreen driver", pdev); if (error) { diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index 913e25a994b4..ef64f36c5ffc 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -37,7 +37,6 @@ struct mc13783_ts_priv { struct input_dev *idev; struct mc13xxx *mc13xxx; struct delayed_work work; - struct workqueue_struct *workq; unsigned int sample[4]; struct mc13xxx_ts_platform_data *touch; }; @@ -54,7 +53,7 @@ static irqreturn_t mc13783_ts_handler(int irq, void *data) * be rescheduled for immediate execution here. However the rearm * delay is HZ / 50 which is acceptable. */ - queue_delayed_work(priv->workq, &priv->work, 0); + schedule_delayed_work(&priv->work, 0); return IRQ_HANDLED; } @@ -106,16 +105,18 @@ static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv) dev_dbg(&idev->dev, "report (%d, %d, %d)\n", x1, y1, 0x1000 - cr0); - queue_delayed_work(priv->workq, &priv->work, HZ / 50); - } else + schedule_delayed_work(&priv->work, HZ / 50); + } else { dev_dbg(&idev->dev, "report release\n"); + } input_report_abs(idev, ABS_PRESSURE, cr0 ? 0x1000 - cr0 : cr0); input_report_key(idev, BTN_TOUCH, cr0); input_sync(idev); - } else + } else { dev_dbg(&idev->dev, "discard event\n"); + } } static void mc13783_ts_work(struct work_struct *work) @@ -189,14 +190,6 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) goto err_free_mem; } - /* - * We need separate workqueue because mc13783_adc_do_conversion - * uses keventd and thus would deadlock. - */ - priv->workq = create_singlethread_workqueue("mc13783_ts"); - if (!priv->workq) - goto err_free_mem; - idev->name = MC13783_TS_NAME; idev->dev.parent = &pdev->dev; @@ -215,14 +208,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "register input device failed with %d\n", ret); - goto err_destroy_wq; + goto err_free_mem; } platform_set_drvdata(pdev, priv); return 0; -err_destroy_wq: - destroy_workqueue(priv->workq); err_free_mem: input_free_device(idev); kfree(priv); @@ -233,7 +224,6 @@ static int mc13783_ts_remove(struct platform_device *pdev) { struct mc13783_ts_priv *priv = platform_get_drvdata(pdev); - destroy_workqueue(priv->workq); input_unregister_device(priv->idev); kfree(priv); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index d159e14f4d20..3bb0637d832e 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include @@ -404,7 +400,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) mutex_lock(&input->mutex); if (device_may_wakeup(&client->dev)) { - if (!input->users) { ret = pixcir_stop(ts); if (ret) { @@ -431,13 +426,7 @@ static const struct of_device_id pixcir_of_match[]; static int pixcir_parse_dt(struct device *dev, struct pixcir_i2c_ts_data *tsdata) { - const struct of_device_id *match; - - match = of_match_device(of_match_ptr(pixcir_of_match), dev); - if (!match) - return -EINVAL; - - tsdata->chip = (const struct pixcir_i2c_chip_data *)match->data; + tsdata->chip = of_device_get_match_data(dev); if (!tsdata->chip) return -EINVAL; diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 73861ad22df4..a9132603ab34 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -23,7 +23,7 @@ #include #define WDT87XX_NAME "wdt87xx_i2c" -#define WDT87XX_DRV_VER "0.9.7" +#define WDT87XX_DRV_VER "0.9.8" #define WDT87XX_FW_NAME "wdt87xx_fw.bin" #define WDT87XX_CFG_NAME "wdt87xx_cfg.bin" @@ -157,6 +157,7 @@ /* Controller requires minimum 300us between commands */ #define WDT_COMMAND_DELAY_MS 2 #define WDT_FLASH_WRITE_DELAY_MS 4 +#define WDT_FLASH_ERASE_DELAY_MS 200 #define WDT_FW_RESET_TIME 2500 struct wdt87xx_sys_param { @@ -726,7 +727,7 @@ static int wdt87xx_write_firmware(struct i2c_client *client, const void *chunk) break; } - msleep(50); + msleep(WDT_FLASH_ERASE_DELAY_MS); error = wdt87xx_write_data(client, data, start_addr, page_size); diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 1534e9b0788c..90d6be3c26cc 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -500,7 +500,7 @@ static int wm97xx_ts_input_open(struct input_dev *idev) { struct wm97xx *wm = input_get_drvdata(idev); - wm->ts_workq = create_singlethread_workqueue("kwm97xx"); + wm->ts_workq = alloc_ordered_workqueue("kwm97xx", 0); if (wm->ts_workq == NULL) { dev_err(wm->dev, "Failed to create workqueue\n");